Search Results

Search found 22653 results on 907 pages for 'case insensitive'.

Page 122/907 | < Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >

• Microsoft Sql Server driver for Nodejs - Part 2

  - by chanderdhall

  Nodejs, Sql server and Json response with Rest This post is part 2 of Microsoft Sql Server driver for Node js.In this post we will look at the JSON responses from the Microsoft Sql Server driver for Node js. Pre-requisites: If you have read the Part 1 of the series, you should be good. We will be using a framework for Rest within Nodejs - Restify, but that would need no prior learning. Restify: Restify is a simple node module for building RESTful services. It is slimmer than Express. Express is a complete module that has all what you need to create a full-blown browser app. However, Restify does not have additional overhead of templating, rendering etc that would be needed if your app has views. So, as the name suggests it's an awesome framework for building RESTful services and is very light-weight. Set up - You can continue with the same directory or project structure we had in the previous post, or can start a new one. Install restify using npm and you are good to go. npm install restify Go to Server.js and include Restify in your solution. Then create the server object using restify.CreateServer() - SLICK - ha? var restify = require('restify'); var server = restify.createServer(); server.listen(8080, function () { console.log('%s listening at %s', server.name, server.url); }); Then make sure you provide a port for the Server to listen at. The call back function is optional but helps you for debugging purposes. Once you are done, save the file and then go to the command prompt and hit 'node server.js' and you should see the following:   To test the server, go to your browser and type the address 'http://localhost:8080/' and oops you will see an error.   Why is that? - Well because we haven't defined any routes. Let's go ahead and create a route. To begin with I'd like to return whatever is typed in the url after my name and the following code should do it. server.get('/ChanderDhall/:status', function respond(req, res, next) { res.end("hello " + req.params.name + "") }); You can also avoid writing call backs inline. Something like this. function respond(req, res, next) { res.end("Chander Dhall " + req.params.name + ""); } server.get('/hello/:name', respond); Now if you go ahead and type http://localhost:8080/ChanderDhall/LovesNode you will get the response 'Chander Dhall loves node'. NOTE: Make sure your url has the right case as it's case-sensitive. You could have also typed it in as 'server.get('/chanderdhall/:name', respond);' Stored procedure: We've talked a lot about Restify now, but keep in mind the post is about being able to use Sql server with Node and return JSON. To see this in action, let's go ahead and create another route to a list of Employees from a stored procedure. server.get('/Employees', Employees); The following code will return a JSON response.  function Employees(req, res, next) { res.header("Content-Type: application/json"); //Need to specify the Content-Type which is //JSON in our case. sql.open(conn_str, function (err, conn) { if (err) { //Logs an error console.log("Error opening the database connection!"); return; } console.log("before query!"); conn.queryRaw("exec sp_GetEmployees", function (err, results) { if (err) { //Connection is open but an error occurs whileWhat else can be done? May be create a formatter or may be even come up with a hypermedia type but that may upset some pragmatists. Well, that's going to be a totally different discussion and is really not part of this series. Summary: We've discussed how to execute a stored procedure using Microsoft Sql Server driver for Node. Also, we have discussed how to format and send out a clean JSON to the app calling this API.  

  Read the article

• Replication - between pools in the same system

  - by Steve Tunstall

  OK, I fully understand that's it's been a LONG time since I've blogged with any tips or tricks on the ZFSSA, and I'm way behind. Hey, I just wrote TWO BLOGS ON THE SAME DAY!!! Make sure you keep scrolling down to see the next one too, or you may have missed it. To celebrate, for the one or two of you out there who are still reading this, I got something for you. The first TWO people who make any comment below, with your real name and email so I can contact you, will get some cool Oracle SWAG that I have to give away. Don't get excited, it's not an iPad, but it pretty good stuff. Only the first two, so if you already see two below, then settle down. Now, let's talk about Replication and Migration.  I have talked before about Shadow Migration here: https://blogs.oracle.com/7000tips/entry/shadow_migrationShadow Migration lets one take a NFS or CIFS share in one pool on a system and migrate that data over to another pool in the same system. That's handy, but right now it's only for file systems like NFS and CIFS. It will not work for LUNs. LUN shadow migration is a roadmap item, however. So.... What if you have a ZFSSA cluster with multiple pools, and you have a LUN in one pool but later you decide it's best if it was in the other pool? No problem. Replication to the rescue. What's that? Replication is only for replicating data between two different systems? Who told you that? We've been able to replicate to the same system now for a few code updates back. These instructions below will also work just fine if you're setting up replication between two different systems. After replication is complete, you can easily break replication, change the new LUN into a primary LUN and then delete the source LUN. Bam. Step 1- setup a target system. In our case, the target system is ourself, but you still have to set it up like it's far away. Go to Configuration-->Services-->Remote Replication. Click the plus sign and setup the target, which is the ZFSSA you're on now. Step 2. Now you can go to the LUN you want to replicate. Take note which Pool and Project you're in. In my case, I have a LUN in Pool2 called LUNp2 that I wish to replicate to Pool1.  Step 3. In my case, I made a Project called "Luns" and it has LUNp2 inside of it. I am going to replicate the Project, which will automatically replicate all of the LUNs and/or Filesystems inside of it.  Now, you can also replicate from the Share level instead of the Project. That will only replicate the share, and not all the other shares of a project. If someone tells you that if you replicate a share, it always replicates all the other shares also in that Project, don't listen to them.Note below how I can choose not only the Target (which is myself), but I can also choose which Pool to replicate it to. So I choose Pool1.  Step 4. I did not choose a schedule or pick the "Continuous" button, which means my replication will be manual only. I can now push the Manual Replicate button on my Actions list and you will see it start. You will see both a barber pole animation and also an update in the status bar on the top of the screen that a replication event has begun. This also goes into the event log.  Step 5. The status bar will also log an event when it's done. Step 6. If you go back to Configuration-->Services-->Remote Replication, you will see your event. Step 7. Done. To see your new replica, go to the other Pool (Pool1 for me), and click the "Replica" area below the words "Filesystems | LUNs" Here, you will see any replicas that have come in from any of your sources. It's a simple matter from here to break the replication, which will change this to a "Local" LUN, and then delete the original LUN back in Pool2. Ok, that's all for now, but I promise to give out more tricks sometime in November !!! There's very exciting stuff coming down the pipe for the ZFSSA. Both new hardware and new software features that I'm just drooling over. That's all I can say, but contact your local sales SC to get a NDA roadmap talk if you want to hear more.   Happy Halloween,Steve 

  Read the article

• Working with Reporting Services Filters–Part 1

  - by smisner

  There are two ways that you can filter data in Reporting Services. The first way, which usually provides a faster performance, is to use query parameters to apply a filter using the WHERE clause in a SQL statement. In that case, the structure of the filter depends upon the syntax recognized by the source database. Another way to filter data in Reporting Services is to apply a filter to a dataset, data region, or a group. Using this latter method, you can even apply multiple filters. However, the use of filter operators or the setup of multiple filters is not always obvious, so in this series of posts, I'll provide some more information about the configuration of filters. First, why not use query parameters exclusively for filtering? Here are a few reasons: You might want to apply a filter to part of the report, but not all of the report. Your dataset might retrieve data from a stored procedure, and doesn't allow you to pass a query parameter for filtering purposes. Your report might be set up as a snapshot on the report server and, in that case, cannot be dynamically filtered based on a query parameter. Next, let's look at how to set up a report filter in general. The process is the same whether you are applying the filter to a dataset, data region, or a group. When you go to the Filters page in the Properties dialog box for whichever of these items you selected (dataset, data region, group), you click the Add button to create a new filter. The interface looks like this: The Expression field is usually a field in the dataset, so to make it easier for you to make a selection,the drop-down list displays all of the current dataset fields. But notice the expression button to the right, which means that you can set up any type of expression-not just a dataset field. To the right of the expression button, you'll find a data type drop-down list. It's important to specify the correct data type for the field or expression you're using. Now for the operators. Here's a list of the options that you have: This Operator Performs This Action =, <>, >, >=, <, <=, Like Compares expression to value Top N, Bottom N Compares expression to Top (Bottom) set of N values (N = integer) Top %, Bottom % Compares expression to Top (Bottom) N percent of values (N = integer or float) Between Determines whether expression is between two values, inclusive In Determines whether expression is found in list of values Last, the Value is what you're comparing to the expression using the operator. The construction of a filter using some operators (=, <>, >, etc.) is fairly simple. If my dataset (for AdventureWorks data) has a Category field, and I have a parameter that prompts the user for a single category, I can set up a filter like this: Expression Data Type Operator Value [Category] Text = [@Category] But if I set the parameter to accept multiple values, I need to change the operator from = to In, just as I would have to do if I were using a query parameter. The parameter expression, [@Category], which translates to =Parameters!Category.Value, doesn’t need to change because it represents an array as soon as I change the parameter to allow multiple values. The “In” operator requires an array. With that in mind, let’s consider a variation on Value. Let’s say that I have a parameter that prompts the user for a particular year – and for simplicity’s sake, this parameter only allows a single value, and I have an expression that evaluates the previous year based on the user’s selection. Then I want to use these two values in two separate filters with an OR condition. That is, I want to filter either by the year selected OR by the year that was computed. If I create two filters, one for each year (as shown below), then the report will only display results if BOTH filter conditions are met – which would never be true. Expression Data Type Operator Value [CalendarYear] Integer = [@Year] [CalendarYear] Integer = =Parameters!Year.Value-1 To handle this scenario, we need to create a single filter that uses the “In” operator, and then set up the Value expression as an array. To create an array, we use the Split function after creating a string that concatenates the two values (highlighted in yellow) as shown below. Expression Data Type Operator Value =Cstr(Fields!CalendarYear.Value) Text In =Split( CStr(Parameters!Year.Value) + ”,” + CStr(Parameters!Year.Value-1) , “,”) Note that in this case, I had to apply a string conversion on the year integer so that I could concatenate the parameter selection with the calculated year. Pay attention to the second argument of the Split function—you must use a comma delimiter for the result to work correctly with the In operator. I also had to change the Expression value from [CalendarYear] (or =Fields!CalendarYear.Value) so that the expression would return a string that I could compare with the values in the string array. More fun with filter expressions in future posts!

  Read the article

• How to Secure a Data Role by Multiple Business Units

  - by Elie Wazen

  In this post we will see how a Role can be data secured by multiple Business Units (BUs).  Separate Data Roles are generally created for each BU if a corresponding data template generates roles on the basis of the BU dimension. The advantage of creating a policy with a rule that includes multiple BUs is that while mapping these roles in HCM Role Provisioning Rules, fewer number of entires need to be made. This could facilitate maintenance for enterprises with a large number of Business Units. Note: The example below applies as well if the securing entity is Inventory Organization. Let us take for example the case of a user provisioned with the "Accounts Payable Manager - Vision Operations" Data Role in Fusion Applications. This user will be able to access Invoices in Vision Operations but will not be able to see Invoices in Vision Germany. Figure 1. A User with a Data Role restricting them to Data from BU: Vision Operations With the role granted above, this is what the user will see when they attempt to select Business Units while searching for AP Invoices. Figure 2.The List Of Values of Business Units is limited to single one. This is the effect of the Data Role granted to that user as can be seen in Figure 1 In order to create a data role that secures by multiple BUs,  we need to start by creating a condition that groups those Business Units we want to include in that data role. This is accomplished by creating a new condition against the BU View .  That Condition will later be used to create a data policy for our newly created Role.  The BU View is a Database resource and  is accessed from APM as seen in the search below Figure 3.Viewing a Database Resource in APM The next step is create a new condition,  in which we define a sql predicate that includes 2 BUs ( The ids below refer to Vision Operations and Vision Germany).  At this point we have simply created a standalone condition.  We have not used this condition yet, and security is therefore not affected. Figure 4. Custom Role that inherits the Purchase Order Overview Duty We are now ready to create our Data Policy.  in APM, we search for our newly Created Role and Navigate to “Find Global Policies”.  we query the Role we want to secure and navigate to view its global policies. Figure 5. The Job Role we plan on securing We can see that the role was not defined with a Data Policy . So will create one that uses the condition we created earlier.   Figure 6. Creating a New Data Policy In the General Information tab, we have to specify the DB Resource that the Security Policy applies to:  In our case this is the BU View Figure 7. Data Policy Definition - Selection of the DB Resource we will secure by In the Rules Tab, we  make the rule applicable to multiple values of the DB Resource we selected in the previous tab.  This is where we associate the condition we created against the BU view to this data policy by entering the Condition name in the Condition field Figure 8. Data Policy Rule The last step of Defining the Data Policy, consists of  explicitly selecting  the Actions that are goverened by this Data Policy.  In this case for example we select the Actions displayed below in the right pane. Once the record is saved , we are ready to use our newly secured Data Role. Figure 9. Data Policy Actions We can now see a new Data Policy associated with our Role.  Figure 10. Role is now secured by a Data Policy We now Assign that new Role to the User.  Of course this does not have to be done in OIM and can be done using a Provisioning Rule in HCM. Figure 11. Role assigned to the User who previously was granted the Vision Ops secured role. Once that user accesses the Invoices Workarea this is what they see: In the image below the LOV of Business Unit returns the two values defined in our data policy namely: Vision Operations and Vision Germany Figure 12. The List Of Values of Business Units now includes the two we included in our data policy. This is the effect of the data role granted to that user as can be seen in Figure 11

  Read the article

• Day 4 - Game Sprites In Action

  - by dapostolov

  Yesterday I drew an image on the screen. Most exciting, but ... I spent more time blogging about it then actual coding. So this next little while I'm going to streamline my game and research and simply post key notes. Quick notes on the last session: The most important thing I wanted to point out were the following methods:           spriteBatch.Begin(SpriteBlendMode.AlphaBlend);           spriteBatch.Draw(sprite, position, Color.White);           spriteBatch.End(); The spriteBatch object is used to draw Textures and a 2D texture is called a Sprite A texture is generally an image, which is called an Asset in XNA The Draw Method in the Game1.cs is looped (until exit) and utilises the spriteBatch object to draw a Scene To begin drawing a Scene you call the Begin Method. To end a Scene you call the End Method. And to place an image on the Scene you call the Draw method. The most simple implementation of the draw method is:           spriteBatch.Draw(sprite, position, Color.White); 1) sprite - the 2D texture you loaded to draw 2) position - the 2d vector, a set of x & y coordinates 3) Color.White - the tint to apply to the texture, in this case, white light = nothing, nada, no tint. Game Sprites In Action! Today, I played around with Draw methods to get comfortable with their "quirks". The following is an example of the above draw method, but with more parameters available for us to use. Let's investigate!             spriteBatch.Draw(sprite, position2, null, Color.White, MathHelper.ToRadians(45.0f), new Vector2(sprite.Width / 2, sprite.Height / 2), 1.0F, SpriteEffects.None, 0.0F); The parameters (in order): 1) sprite  the texture to display 2) position2 the position on the screen / scene this can also be a rectangle 3) null the portion of the image to display within an image null = display full image this is generally used for animation strips / grids (more on this below) 4) Color.White Texture tinting White = no tint 5) MathHelper.ToRadians(45.0f) rotation of the object, in this case 45 degrees rotates from the set plotting point. 6) new Vector(0,0) the plotting point in this case the top left corner the image will rotate from the top left of the texture in the code above, the point is set to the middle of the image. 7) 1.0f Image scaling (1x) 8) SpriteEffects.None you can flip the image horizontally or vertically 9) 0.0f The z index of the image. 0 = closer, 1 behind? And playing around with different combinations I was able to come up with the following whacky display:   Checking off Yesterdays Intention List: learn game development terminology (in progress) - We learned sprite, scene, texture, and asset. how to place and position (rotate) a static image on the screen (completed) - The thing to note was, it's was in radians and I found a cool helper method to convert degrees into radians. Also, the image rotates from it's specified point. how to layer static images on the screen (completed) - I couldn't seem to get the zIndex working, but one things for sure, the order you draw the image in also determines how it is rendered on the screen. understand image scaling (in progress) - I'm not sure I have this fully covered, but for the most part plug a number in the scaling field and the image grows / shrinks accordingly. can we reuse images? (completed) - yes, I loaded one image and plotted the bugger all over the screen. understand how framerate is handled in XNA (in progress) - I hacked together some code to display the framerate each second. A framerate of 60 appears to be the standard. Interesting to note, the GameTime object does provide you with some cool timing capabilities, such as...is the game running slow? Need to investigate this down the road. how to display text , basic shapes, and colors on the screen (in progress) - i got text rendered on the screen, and i understand containing rectangles. However, I didn't display "shapes" & "colors" how to interact with an image (collision of user input?) (todo) how to animate an image and understand basic animation techniques (in progress) - I was able to create a stripe animation of numbers ranging from 1 - 4, each block was 40 x 40 pixles for a total stripe size of 160 x 40. Using the portion (source Rectangle) parameter, i limited this display to each section at varying intervals. It was interesting to note my first implementation animated at rocket speed. I then tried to create a smoother animation by limiting the redraw capacity, which seemed to work. I guess a little more research will have to be put into this for animating characters / scenes. how to detect colliding images or screen edges (todo) - but the rectangle object can detect collisions I believe. how to manipulate the image, lets say colors, stretching (in progress) - I haven't figured out how to modify a specific color to be another color, but the tinting parameter definately could be used. As for stretching, use the rectangle object as the positioning and the image will stretch to fit! how to focus on a segment of an image...like only displaying a frame on a film reel (completed) - as per basic animation techniques what's the best way to manage images (compression, storage, location, prevent artwork theft, etc.) (todo) Tomorrows Intention Tomorrow I am going to take a stab at rendering a game menu and from there I'm going to investigate how I can improve upon the code and techniques. Intention List: Render a menu, fancy or not Show the mouse cursor Hook up click event A basic animation of somesort Investigate image / menu techniques D.

  Read the article

• Financial Management: Why Move to the Cloud?

  - by Kathryn Perry

  A guest post by Terrance Wampler, Vice President, Financials Product Strategy, Oracle I’ve spent my career designing and developing financial management systems, most of it at Oracle. Every single day I either meet with our customers or talk to them on the phone. The time is usually spent discussing various business challenges facing CFOs and Controllers, who are running Oracle’s Financials. Lately, we’ve been talking a lot about cloud computing and whether it makes sense for finance to go to the cloud. Here are some pros and cons that might help you make that decision. Let’s start with the benefits of cloud solutions. The first is savings. With cloud services, you pay only for those commodities that you use. That makes you feel like you're getting better value for your money. Plus, you can preserve your cash for your core business and you can get a better matching of expenses and revenues. So, at the top of the list is lower total cost of ownership. The second point has to do with optimization. With cloud services, you’ll need less IT infrastructure so you can optimize your IT resources for better-value, higher-end projects. This also leads to greater financial visibility, where there's a clear cost for the set of services or features replaced by cloud services. And, the last benefit is what I call acceleration. You can save money by speeding up the initialization and deployment of the project. You don't have to deal with IT infrastructure and you can start implementing right away. We did a quick survey of about 70 CFOs at the CFO Summit last month in New York City. We asked them why they were looking at cloud services, and not necessarily just for financials. The No. 1 response was perceived lower cost of ownership. But of course there are risks to consider. The first thing most people think about in the cloud is security and ownership of data. So, will your data really be safe? Can you meet your own privacy policy requirements? Do you really want your private financial data exposed? Do you trust the provider? Is what you see really your data? Do you own it or is it managed by someone else? Security is a big concern that comes with an emotional component. The next thing in the risk category is reliability. Is the provider proven? You’re taking what you have control over – for example, standards and policies and internal service level agreements – away from your IT department and giving it to someone else. Will you still be able to adapt to shifts in your business? Will the provider be able to grow with your business effectively? Reliability means having a provider that can give you the service infrastructure that you need. And then there’s performance, which has two components in terms of risk. Going forward, will the provider be able to scale the infrastructure or service level if you have new employees or new businesses? And second, will the price you negotiate and the rate you lock in cover additional costs and rising service fees? Another piece is cost. What happens if you don't get the service level you want? What if you end the service? What happens, if after a few years, you send the service out for bid and change service? Can you move your data? Can you move the applications? Do the integrations work? These are cost components people don’t always take into account. And, the final piece is the business case. The perception is that you can get started really quickly with cloud. It has a perceived lower cost of total ownership and it feels cool because it's cloud. But do you have a good business case for moving to the cloud? Your total cost of ownership is over three years; then you’ll renew it, so your TCO is six years. Have you compared that to other internal services that you’re offering? You might already have product that you can run this new business or division on. In that same survey at the CFO Summit, the execs thought the biggest perceived risks were security of data, ability to move data back, and the ability to create a business case to actually justify the risks. So that’s the list of pros and cons. Not to leave you hanging, I will do another post on how to balance these pros and cons and make the right decision for your business.

  Read the article

• Is this how dynamic language copes with dynamic requirement?

  - by Amumu

  The question is in the title. I want to have my thinking verified by experienced people. You can add more or disregard my opinion, but give me a reason. Here is an example requirement: Suppose you are required to implement a fighting game. Initially, the game only includes fighters, who can attack each other. Each fighter can punch, kick or block incoming attacks. Fighters can have various fighting styles: Karate, Judo, Kung Fu... That's it for the simple universe of the game. In an OO like Java, it can be implemented similar to this way: abstract class Fighter { int hp, attack; void punch(Fighter otherFighter); void kick(Fighter otherFighter); void block(Figther otherFighter); }; class KarateFighter extends Fighter { //...implementation...}; class JudoFighter extends Fighter { //...implementation... }; class KungFuFighter extends Fighter { //...implementation ... }; This is fine if the game stays like this forever. But, somehow the game designers decide to change the theme of the game: instead of a simple fighting game, the game evolves to become a RPG, in which characters can not only fight but perform other activities, i.e. the character can be a priest, an accountant, a scientist etc... At this point, to make it more generic, we have to change the structure of our original design: Fighter is not used to refer to a person anymore; it refers to a profession. The specialized classes of Fighter (KaraterFighter, JudoFighter, KungFuFighter) . Now we have to create a generic class named Person. However, to adapt this change, I have to change the method signatures of the original operations: class Person { int hp, attack; List<Profession> skillSet; }; abstract class Profession {}; class Fighter extends Profession { void punch(Person otherFighter); void kick(Person otherFighter); void block(Person otherFighter); }; class KarateFighter extends Fighter { //...implementation...}; class JudoFighter extends Fighter { //...implementation... }; class KungFuFighter extends Fighter { //...implementation ... }; class Accountant extends Profession { void calculateTax(Person p) { //...implementation...}; void calculateTax(Company c) { //...implementation...}; }; //... more professions... Here are the problems: To adapt to the method changes, I have to fix the places where the changed methods are called (refactoring). Every time a new requirement is introduced, the current structural design has to be broken to adapt the changes. This leads to the first problem. Rigid structure makes it hard for code reuse. A function can only accept the predefined types, but it cannot accept future unknown types. A written function is bound to its current universe and has no way to accommodate to the new types, without modifications or rewrite from scratch. I see Java has a lot of deprecated methods. OO is an extreme case because it has inheritance to add up the complexity, but in general for statically typed language, types are very strict. In contrast, a dynamic language can handle the above case as follow: ;;fighter1 punch fighter2 (defun perform-punch (fighter1 fighter2) ...implementation... ) ;;fighter1 kick fighter2 (defun perform-kick (fighter1 fighter2) ...implementation... ) ;;fighter1 blocks attacks from fighter2 (defun perform-block (fighter1 fighter2) ...implementation... ) fighter1 and fighter2 can be anything as long as it has the required data for calculation; or methods (duck typing). You don't have to change from the type Fighter to Person. In the case of Lisp, because Lisp only has a single data structure: list, it's even easier to adapt to changes. However, other dynamic languages can have similar behaviors as well. I work primarily with static languages (mainly C and Java, but working with Java was a long time ago). I started learning Lisp and some other dynamic languages this year. I can see how it helps improving my productivity.

  Read the article

• Caveat utilitor - Can I run two versions of Microsoft Project side-by-side?

  - by Martin Hinshelwood

  A number of out customers have asked if there are any problems in installing and running multiple versions of Microsoft Project on a single client. Although this is a case of Caveat utilitor (Let the user beware), as long as the user understands and accepts the issues that can occur then they can do this. Although Microsoft provide the ability to leave old versions of Office products (except Outlook) on your client when you are installing a new version of the product they certainly do not endorse doing so. Figure: For Project you can choose to keep the old stuff   That being the case I would have preferred that they put a “(NOT RECOMMENDED)” after the options to impart that knowledge to the rest of us, but they did not. The default and recommended behaviour is for the newer version installer to remove the older versions. Of course this does not apply in the revers. There are no forward compatibility packs for Office. There are a number of negative behaviours (or bugs) that can occur in this configuration: There is only one MS Project In Windows a file extension can only be associated with a single program.  In this case, MPP files can be associated with only one version of winproj.exe.  The executables are in different folders so if a user double-clicks a Project file on the desktop, file explorer, or Outlook email, Windows will launch the winproj.exe associated with MPP and then load the MPP file.  There are problems associated with this situation and in some cases workarounds. The user double-clicks on a Project 2010 file, Project 2007 launches but is unable to open the file because it is a newer version.  The workaround is for the user to launch Project 2010 from the Start menu then open the file.  If the file is attached to an email they will need to first drag the file to the desktop. All your linked MS Project files need to be of the same version There are a number of problems that occur when people use on Microsoft’s Object Linking and Embedding (OLE) technology.  The three common uses of OLE are: for inserted projects where a Master project contains sub-projects and each sub-project resides in its own MPP file shared resource pools where multiple MPP files share a common resource pool kept in a single MPP file cross-project links where a task or milestone in one MPP file has a  predecessor/successor relationship with a task or milestone in a different MPP file What I’ve seen happen before is that if you are running in a version of Project that is not associated with the MPP extension and then try and activate an OLE link then Project tries to launch the other version of Project.  Things start getting very confused since different MPP files are being controlled by different versions of Project running at the same time.  I haven’t tried this in awhile so I can’t give you exact symptoms but I suspect that if Project 2010 is involved the symptoms will be different then in a Project 2003/2007 scenario.  I’ve noticed that Project 2010 gives different error messages for the exact same problem when it occurs in Project 2003 or 2007.  -Anonymous The recommendation would be either not to use this feature if you have to have multiple versions of Project installed or to use only a single version of Project. You may get unexpected negative behaviours if you are using shared resource pools or resource pools even when you are not running multiple versions as I have found that they can get broken very easily. If you need these thing then it is probably best to use Project Server as it was created to solve many of these specific issues. Note: I would not even allow multiple people to access a network copy of a Project file because of the way Windows locks files in write mode. This can cause write-locks that get so bad a server restart is required I’ve seen user’s files get write-locked to the point where the only resolution is to reboot the server. Changing the default version to run for an extension So what if you want to change the default association from Project 2007 to Project 2010?   Figure: “Control Panel | Folder Options | Change the file associated with a file extension” Windows normally only lists the last version installed for a particular extension. You can select a specific version by selecting the program you want to change and clicking “Change program… | Browse…” and then selecting the .exe you want to use on the file system. Figure: You will need to select the exact version of “winproj.exe” that you want to run Conclusion Although it is possible to run multiple versions of Project on one system in the main it does not really make sense.

  Read the article

• BizTalk &ndash; Routing failure on Delivery Notifications (BizTalk 2006 R2 to 2013)

  - by S.E.R.

  Originally posted on: http://geekswithblogs.net/SERivas/archive/2013/11/11/biztalk-routing-failure-on-delivery-notifications.aspxThis is a detailed explanation of a something I posted a few month ago on stackoverflow, concerning a weird behavior (a bug, really…) of the delivery notifications in BizTalk. Reminder: what are delivery notifications Mechanism BizTalk has the ability to automatically publish positive acknowledgments (ACK) when it has succeeded transmitting a message or negative acknowledgments (NACK) in case of a transmission failure. Orchestrations can use delivery notifications to subscribe to those ACKs and NACKs in order to know if a message sent on a one-way send port has been successfully transmitted. Delivery Notifications can be “activated” in two ways: The most common and easy way is to set the Delivery Notification property of a logical send port (in the orchestration designer) to Transmitted: Another way is to set the BTS.AckRequired context property of the message to be sent to true: NOTE: fundamentally, those methods are strictly equivalent since the fact of setting the Delivery Notification to Transmitted on the send port only tells BizTalk the BTS.AckRequired context property has to be set to true on the outgoing message. Related context properties ACKs and NACKs have a common set of propoted context properties, which are : Propriété Description AckType Equals ACK when successful or NACK otherwise AckID MessageID of the message concerned by the acknowledgment AckOwnerID InstanceID of the instance associated with the acknowledgment AckSendPortID ID of the send port AckSendPortName Name of the send port AckOutboundTransportLocation URI of the send port AckReceivePortID ID of the port the message came from AckReceivePortName Name of the port the message came from AckInboundTransportLocation URI of the port the message came from Detailed behavior The way Delivery Notifications are handled by BizTalk is peculiar compared to the standard behavior of the Message Box: if no active subscription exists for the acknowledgment, it is simply discarded. The direct consequence of this is that there can be no routing failure for an acknowledgment, and an acknowledgment cannot be suspended. Moreover, when a message is sent to a send port where Delivery Notification = Transmitted, a correlation set is initialized and a correlation token is attached to the message (Context property: CorrelationToken). This correlation token will also be attached to the acknowledgment. So when the acknowledgment is issued, it is automatically routed to the source orchestration. Finally, when a NACK is received by the source orchestration, a DeliveryFailureException is thrown, which can be caught in Catch section. Context of the problem Consider this scenario: In an orchestration, Delivery Notifications are activated on a One-Way send port In case of a transmission failure, the messaging instance is suspended and the orchestration catches an exception (DeliveryFailureException). When the exception is caught, the orchestration does some logging and then terminates (thanks to a Terminate shape). So that leaves only the suspended messaging instance, waiting to be resumed. Symptoms Once the problem that caused the transmission failure is solved, the messaging instance is resumed. Considering what was said in the reminder, we would expect the instance to complete, leaving no active or suspended instance. Nevertheless, the result is that the messaging instance is once more suspended, this time because of a routing failure: The routing failure report shows that the suspended message has the following attached properties: Explanation Those properties clearly indicate that the message being suspended is an acknowledgment (ACK in this case), which was published in the message box and was supended because no subscribers were found. This makes sense, since the source orchestration was terminated before we resumed the messaging instance. So its subscription to the acknowledgments was no longer active when the ACK was published, which explains the routing failure. But this behavior is in direct contradiction with what was said earlier: an acknowledgment must be discarded when no subscriber is found and therefore should not be suspended. Cause It is indeed an outright bug, which appeared with the SP1 of BizTalk 2006 R2 and was never corrected since then: not in the next 4 CUs, not in BizTalk 2009, not in 2010 and not event in 2013 – though I haven’t tested CU1 and CU2 for this last edition, but I bet there is nothing to be expected from those CUs (on this particular point). Side effects This bug can have pretty nasty side effects: this behavior can be propagated to other ports, due to routing mechanisms. For instance: you have configured the ESB Toolkit and have activated the “Enable routing failure for failed messages”. The result will be that the ESB Exception SQL send port will also try and publish ACKs or NACKs concerning its own messaging instances. In itself, this is already messy, but remember that those acknowledgments will also have the source correlation token attached to them… See how far it goes? Well, actually there is more: in SQL send ports, transactions will be rolled back because of the routing failure (I guess it also happens with other adapters - like Oracle, but I haven’t tested them). Again, think of what happens when the send port is the ESB Exception send port: your BizTalk box is going mad, but you have no idea since no exception can be written in the exception database! All of this can be tricky to diagnose, I can tell you that… Solution There is no real solution, only a work-around, but it won’t solve all of the problems and side effects. The idea is to create an orchestration which subscribes to all acknowledgments. That is to say: The message type of the incoming message will be XmlDocument The BTS.AckType property exists The logical receive port will use direct binding By doing so, all acknowledgments will be consumed by an instance of this orchestration, thus avoiding the routing failure. Here is an example of what this orchestration could look like: In order not to pollute the HAT and the DTA Db (after all, this orchestration is only meant to be a palliative to some faulty internal BizTalk mechanism, so there should be no trace of its execution), all tracking must be deactivated:

  Read the article

• Windows in StreamInsight: Hopping vs. Snapshot

  - by Roman Schindlauer

  Three weeks ago, we explained the basic concept of windows in StreamInsight: defining sets of events that serve as arguments for set-based operations, like aggregations. Today, we want to discuss the so-called Hopping Windows and compare them with Snapshot Windows. We will compare these two, because they can serve similar purposes with different behaviors; we will discuss the remaining window type, Count Windows, another time. Hopping (and its syntactic-sugar-sister Tumbling) windows are probably the most straightforward windowing concept in StreamInsight. A hopping window is defined by its length, and the offset from one window to the next. They are aligned with some absolute point on the timeline (which can also be given as a parameter to the window) and create sets of events. The diagram below shows an example of a hopping window with length of 1h and hop size (the offset) of 15 minutes, hence creating overlapping windows:   Two aspects in this diagram are important: Since this window is overlapping, an event can fall into more than one windows. If an (interval) event spans a window boundary, its lifetime will be clipped to the window, before it is passed to the set-based operation. That’s the default and currently only available window input policy. (This should only concern you if you are using a time-sensitive user-defined aggregate or operator.) The set-based operation will be applied to each of these sets, yielding a result. This result is: A single scalar value in case of built-in or user-defined aggregates. A subset of the input payloads, in case of the TopK operator. Arbitrary events, when using a user-defined operator. The timestamps of the result are almost always the ones of the windows. Only the user-defined  operator can create new events with timestamps. (However, even these event lifetimes are subject to the window’s output policy, which is currently always to clip to the window end.) Let’s assume we were calculating the sum over some payload field: var result = from window in source.HoppingWindow( TimeSpan.FromHours(1), TimeSpan.FromMinutes(15), HoppingWindowOutputPolicy.ClipToWindowEnd) select new { avg = window.Avg(e => e.Value) }; Now each window is reflected by one result event:   As you can see, the window definition defines the output frequency. No matter how many or few events we got from the input, this hopping window will produce one result every 15 minutes – except for those windows that do not contain any events at all, because StreamInsight window operations are empty-preserving (more about that another time). The “forced” output for every window can become a performance issue if you have a real-time query with many events in a wide group & apply – let me explain: imagine you have a lot of events that you group by and then aggregate within each group – classical streaming pattern. The hopping window produces a result in each group at exactly the same point in time for all groups, since the window boundaries are aligned with the timeline, not with the event timestamps. This means that the query output will become very bursty, delivering the results of all the groups at the same point in time. This becomes especially obvious if the events are long-lasting, spanning multiple windows each, so that the produced result events do not change their value very often. In such a case, a snapshot window can remedy. Snapshot windows are more difficult to explain than hopping windows: they represent those periods in time, when no event changes occur. In other words, if you mark all event start and and times on your timeline, then you are looking at all snapshot window boundaries:   If your events are never overlapping, the snapshot window will not make much sense. It is commonly used together with timestamp modification, which make it a very powerful tool. Or as Allan Mitchell expressed in in a recent tweet: “I used to look at SnapshotWindow() with disdain. Now she is my mistress, the one I turn to in times of trouble and need”. Let’s look at a simple example: I want to compute the average of some value in my events over the last minute. I don’t want this output be produced at fixed intervals, but at soon as it changes (that’s the true event-driven spirit!). The snapshot window will include all currently active event at each point in time, hence we need to extend our original events’ lifetimes into the future: Applying the Snapshot window on these events, it will appear to be “looking back into the past”: If you look at the result produced in this diagram, you can easily prove that, at each point in time, the current event value represents the average of all original input event within the last minute. Here is the LINQ representation of that query, applying the lifetime extension before the snapshot window: var result = from window in source .AlterEventDuration(e => TimeSpan.FromMinutes(1)) .SnapshotWindow(SnapshotWindowOutputPolicy.Clip) select new { avg = window.Avg(e => e.Value) }; With more complex modifications of the event lifetimes you can achieve many more query patterns. For instance “running totals” by keeping the event start times, but snapping their end times to some fixed time, like the end of the day. Each snapshot then “sees” all events that have happened in the respective time period so far. Regards, The StreamInsight Team

  Read the article

• Silverlight Reporting Application Part 3.5 - Prism Background and WCF RIA [Series Intermission]

  Taking a step back before I dive into the details and full-on coding fun, I wanted to once again respond to a comment on my last post to clear up some things in regards to how I'm setting up my project and some of the choices I've made. Aka, thanks Ben. :) Prism Project Setup For starters, I'm not the ideal use case for a Prism application. In most cases where you've got a one-man team, Prism can be overkill as it is more intended for large teams who are geographically dispersed or in applications that have a larger scale than my Recruiting application in which you'll greatly benefit from modularity, delayed loading of xaps, etc. What Prism offers, though, is a manner for handling UI, commands, and events with the idea that, through a modular approach in which no parts really need to know about one another, I can update this application bit by bit as hiring needs change or requirements differ between offices without having to worry that changing something in the Jobs module will break something in, say, the Scheduling module. All that being said, here's a look at how our project breakdown for Recruit (MVVM/Prism implementation) looks: This could be a little misleading though, as each of those modules is actually another project in the overall Recruit solution. As far as what the projects actually are, that looks a bit like this: Recruiting Solution Recruit (Shell up there) - Main Silverlight Application .Web - Default .Web application to host the Silverlight app Infrastructure - Silverlight Class Library Project Modules - Silverlight Class Library Projects Infrastructure &Modules The Infrastructure project is probably something you'll see to some degree in any composite application. In this application, it is going to contain custom commands (you'll see the joy of these in a post or two down the road), events, helper classes, and any custom classes I need to share between different modules. Think of this as a handy little crossroad between any parts of your application. Modules on the other hand are the bread and butter of this application. Besides the shell, which holds the UI skeleton, and the infrastructure, which holds all those shared goodies, the modules are self-contained bundles of functionality to handle different concerns. In my scenario, I need a way to look up and edit Jobs, Applicants, and Schedule interviews, a Notification module to handle telling the user when different things are happening (i.e., loading from database), and a Menu to control interaction and moving between different views. All modules are going to follow the following pattern: The module class will inherit from IModule and handle initialization and loading the correct view into the correct region, whereas the Views and ViewModels folders will contain paired Silverlight user controls and ViewModel class backings. WCF RIA Services Since we've got all the projects in a single solution, we did not have to go the route of creating a WCR RIA Services Class Library. Every module has it's WCF RIA link back to the main .Web project, so the single Linq-2-SQL (yes, I said Linq-2-SQL, but I'll soon be switching to OpenAccess due to the new visual designer) context I'm using there works nicely with the scope of my project. If I were going for completely separating this project out and doing different, dynamically loaded elements, I'd probably go for the separate class library. Hope that clears that up. In the future though, I will be using that in a project that I've got in the "when I've got enough time to work on this" pipeline, so we'll get into that eventually- and hopefully when WCF RIA is in full release! Why Not use Silverlight Navigation/Business Template? The short answer- I'm a creature of habit, and having used Silverlight for a few years now, I'm used to doing lots of things manually. :) Plus, starting with a blank slate of a project I'm able to set up things exactly as I want them to be. In this case, rather than the navigation frame we would see in one of the templates, the MainRegion/ContentControl is working as our main navigation window. In many cases I will use theSilverlight navigation template to start things off, however in this case I did not need those features so I opted out of using that. Next time when I actually hit post #4, we're going to get into the modules and starting to get functionality into this application. Next week is also release week for the Q1 2010 release, so be sure to check out our annualWebinar Week (I might be biased, but Wednesday is my favorite out of the group). Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• creating a pre-menu level select screen

  - by Ephiras

  Hi I am working on creating a tower Defence java applet game and have come to a road block about implementing a title screen that i can select the level and difficulty of the rest of the game. my title screen class is called Menu. from this menu class i need to pass in many different variables into my Main class. i have used different classes before and know how to run them and such. but if both classes extend applet and each has its individual graphics method how can i run things from Main even though it was created in Menu. what i essentially want to do is run the Menu class withits action listeners and graphics until a Difficulty button has been selected, run the main class (which 100% works without having to have the Menu class) and pretty much terminate Menu so that i cannot go back to it, do not see its buttons or graphics menus. can i run one applet annd when i choose a button close that one and launch the other one? IF you would like to download the full project you can find it here, i had to comment out all the code that wasn't working my Menu class import java.awt.*; import java.awt.event.*; import java.applet.*; public class Menu extends Applet implements ActionListener{ Button bEasy,bMed,bHard; Main m; public void init(){ bEasy= new Button("Easy"); bEasy.setBounds(140,200,100,50); add(bEasy); bMed = new Button("Medium");bMed.setBounds(280,200,100,50); add(bMed); bHard= new Button("Hard");bHard.setBounds(420,200,100,50); add(bHard); setLayout(null); } public void actionPerformed(ActionEvent e){ Main m = new Main(20,10,3000,mapMed);//break; switch (e.getSource()){ case bEasy: Main m = new Main(6000,20,"levels/levelEasy.png");break;//enimies tower money world case bMed: Main m = new Main(4000,15,"levels/levelMed.png");break; case bHard: Main m = new Main(2000,10,"levels/levelEasy.png");break; default: break; } } public void paint(){ //m.draw(g) } } and here is my main class initialising code. import java.awt.*; import java.awt.event.*; import java.applet.*; import java.io.IOException; public class Main extends Applet implements Runnable, MouseListener, MouseMotionListener, ActionListener{ Button startButton, UpgRange, UpgDamage; //set up the buttons Color roadCol,startCol,finCol,selGrass,selRoad; //set up the colors Enemy e[][]; Tower t[]; Image towerpic,backpic,roadpic,levelPic; private Image i; private Graphics doubleG; //here is the world 0=grass 1=road 2=start 3=end int world[][],eStartX,eStartY; boolean drawMouse,gameEnd; static boolean start=false; static int gridLength=15; static int round=0; int Mx,My,timer=1500; static int sqrSize=31; int towers=0,towerSelected=-10; static int castleHealth=2000; String levelPath; //choose the level Easy Med or Hard int maxEnemy[] = {5,7,12,20,30,15,50,30,40,60};//number of enimies per round int maxTowers=15;//maximum number of towers allowed static int money =2000,damPrice=600,ranPrice=350,towerPrice=700; //money = the intial ammount of money you start of with //damPrice is the price to increase the damage of a tower //ranPrice is the price to increase the range of a tower public void main(int cH,int mT,int mo,int dP,int rP,int tP,String path,int[] mE)//constructor 1 castleHealth=cH; maxTowers=mT; money=mo; damPrice=dP; ranPrice=rP; towerPrice=tP; String levelPath=path; maxEnemy = mE; buildLevel(); } public void main(int cH,int mT,String path)//basic constructor castleHealth=cH; maxTowers=mT; String levelPath=path; maxEnemy = mE; buildLevel(); } public void init(){ setSize(sqrSize*15+200,sqrSize*15);//set the size of the screen roadCol = new Color(255,216,0);//set the colors for the different objects startCol = new Color(0,38,255); finCol = new Color(255,0,0); selRoad = new Color(242,204,155);//selColor is the color of something when your mouse hovers over it selGrass = new Color(0,190,0); roadpic = getImage(getDocumentBase(),"images/road.jpg"); towerpic = getImage(getDocumentBase(),"images/tower.png"); backpic = getImage(getDocumentBase(),"images/grass.jpg"); levelPic = getImage(getDocumentBase(),"images/level.jpg"); e= new Enemy[maxEnemy.length][];//activates all of the enimies for (int r=0;r<e.length;r++) e[r] = new Enemy[maxEnemy[r]]; t= new Tower[maxTowers]; for (int i=0;i<t.length;i++) t[i]= new Tower();//activates all the towers for (int i=0;i<e.length; i++)//sets all of the enimies starting co ordinates for (int j=0;j<e[i].length;j++) e[i][j] = new Enemy(eStartX,eStartY,world); initButtons();//initialise all the buttons addMouseMotionListener(this); addMouseListener(this); }

  Read the article

• PanelGridLayout - A Layout Revolution

  - by Duncan Mills

  With the most recent 11.1.2 patchset (11.1.2.3) there has been a lot of excitement around ADF Essentials (and rightly so), however, in all the fuss I didn't want an even more significant change to get missed - yes you read that correctly, a more significant change! I'm talking about the new panelGridLayout component, I can confidently say that this one of the most revolutionary components that we've introduced in 11g, even though it sounds rather boring. To be totally accurate, panelGrid was introduced in 11.1.2.2 but without any presence in the component palette or other design time support, so it was largely missed unless you read the release notes. However in this latest patchset it's finally front and center. Its time to explore - we (really) need to talk about layout.  Let's face it,with ADF Faces rich client, layout is a rather arcane pursuit, once you are a layout master, all bow before you, but it's more of an art than a science, and it is often, in fact, way too difficult to achieve what should (apparently) be a pretty simple. Here's a great example, it's a homework assignment I set for folks I'm teaching this stuff to:  The requirements for this layout are: The header is 80px high, the footer is 30px. These are both fixed.  The first section of the header containing the logo is 180px wide The logo is centered within the top left hand corner of the header  The title text is start aligned in the center zone of the header and will wrap if the browser window is narrowed. It should be aligned in the center of the vertical space  The about link is anchored to the right hand side of the browser with a 20px gap and again is center aligned vertically. It will move as the browser window is reduced in width. The footer has a right aligned copyright statement, again middle aligned within a 30px high footer region and with a 20px buffer to the right hand edge. It will move as the browser window is reduced in width. All remaining space is given to a central zone, which, in this case contains a panelSplitter. Expect that at some point in time you'll need a separate messages line in the center of the footer.  In the homework assigment I set I also stipulate that no inlineStyles can be used to control alignment or margins and no use of other taglibs (e.g. JSF HTML or Trinidad HTML). So, if we take this purist approach, that basic page layout (in my stock solution) requires 3 panelStretchLayouts, 5 panelGroupLayouts and 4 spacers - not including the spacer I use for the logo and the contents of the central zone splitter - phew! The point is that even a seemingly simple layout needs a bit of thinking about, particulatly when you consider strechting and browser re-size behavior. In fact, this little sample actually teaches you much of what you need to know to become vaguely competant at layouts in the framework. The underlying result of "the way things are" is that most of us reach for panelStretchLayout before even finishing the first sip of coffee as we embark on a new page design. In fact most pages you will see in any moderately complex ADF page will basically be nested panelStretchLayouts and panelGroupLayouts, sometimes many, many levels deep. So this is a problem, we've known this for some time and now we have a good solution. (I should point out that the oft-used Trinidad trh tags are not a particularly good solution as you're tie-ing yourself to an HTML table based layout in that case with a host of attendent issues in resize and bi-di behavior, but I digress.) So, tadaaa, I give to you panelGridLayout. PanelGrid, as the name suggests takes a grid like (dare I say slightly gridbag-like) approach to layout, dividing your layout into rows and colums with margins, sizing, stretch behaviour, colspans and rowspans all rolled in, all without the use of inlineStyle. As such, it provides for a much more powerful and consise way of defining a layout such as the one above that is actually simpler and much more logical to design. The basic building blocks are the panelGridLayout itself, gridRow and gridCell. Your content sits inside the cells inside the rows, all helpfully allowing both streching, valign and halign definitions without the need to nest further panelGroupLayouts. So much simpler!  If I break down the homework example above my nested comglomorate of 12 containers and spacers can be condensed down into a single panelGrid with 3 rows and 5 cell definitions (39 lines of source reduced to 24 in the case of the sample). What's more, the actual runtime representation in the browser DOM is much, much simpler, and clean, with basically one DIV per cell (Note that just because the panelGridLayout semantics looks like an HTML table does not mean that it's rendered that way!) . Another hidden benefit is the runtime cost. Because we can use a single layout to achieve much more complex geometries the client side layout code inside the browser is having to work a lot less. This will be a real benefit if your application needs to run on lower powered clients such as netbooks or tablets. So, it's time, if you're on 11.1.2.2 or above, to smile warmly at your panelStretchLayouts, wrap the blanket around it's knees and wheel it off to the Sunset Retirement Home for a well deserved rest. There's a new kid on the block and it wants to be your friend. 

  Read the article

• Android Bitmap : collision Detecting [on hold]

  - by user2505374

  I am writing an Android game right now and I would need some help in the collision of the wall on screen. When I drag the ball in the top and right it able to collide in wall but when I drag it faster it was able to overlap in the wall. public boolean onTouchEvent(MotionEvent event) { int x = (int) event.getX(); int y = (int) event.getY(); switch (event.getAction()) { // if the player moves case MotionEvent.ACTION_MOVE: { if (playerTouchRect.contains(x, y)) { boolean left = false; boolean right = false; boolean up = false; boolean down = false; boolean canMove = false; boolean foundFinish = false; if (x != pLastXPos) { if (x < pLastXPos) { left = true; } else { right = true; } pLastXPos = x; } if (y != pLastYPos) { if (y < pLastYPos) { up = true; } else { down = true; } pLastYPos = y; } plCellRect = getRectFromPos(x, y); newplRect.set(playerRect); newplRect.left = x - (int) (playerRect.width() / 2); newplRect.right = x + (int) (playerRect.width() / 2); newplRect.top = y - (int) (playerRect.height() / 2); newplRect.bottom = y + (int) (playerRect.height() / 2); int currentRow = 0; int currentCol = 0; currentRow = getRowFromYPos(newplRect.top); currentCol = getColFromXPos(newplRect.right); if(!canMove){ canMove = mapManager.getCurrentTile().pMaze[currentRow][currentCol] == Cell.wall; canMove =true; } finishTest = mapManager.getCurrentTile().pMaze[currentRow][currentCol]; foundA = finishTest == Cell.valueOf(letterNotGet + ""); canMove = mapManager.getCurrentTile().pMaze[currentRow][currentCol] != Cell.wall; canMove = (finishTest == Cell.floor || finishTest == Cell.pl) && canMove; if (canMove) { invalidate(); setTitle(); } if (foundA) { mapManager.getCurrentTile().pMaze[currentRow][currentCol] = Cell.floor; // finishTest letterGotten.add(letterNotGet); playCurrentLetter(); /*sounds.play(sExplosion, 1.0f, 1.0f, 0, 0, 1.5f);*/ foundS = letterNotGet == 's'; letterNotGet++; }if(foundS){ AlertDialog.Builder builder = new AlertDialog.Builder(mainActivity); builder.setTitle(mainActivity.getText(R.string.finished_title)); LayoutInflater inflater = mainActivity.getLayoutInflater(); View view = inflater.inflate(R.layout.finish, null); builder.setView(view); View closeButton =view.findViewById(R.id.closeGame); closeButton.setOnClickListener(new OnClickListener() { @Override public void onClick(View clicked) { if(clicked.getId() == R.id.closeGame) { mainActivity.finish(); } } }); AlertDialog finishDialog = builder.create(); finishDialog.show(); } else { Log.d(TAG, "INFO: updated player position"); playerRect.set(newplRect); setTouchZone(); updatePlayerCell(); } } // end of (CASE) if playerTouch break; } // end of (SWITCH) Case motion }//end of Switch return true; }//end of TouchEvent private void finish() { // TODO Auto-generated method stub } public int getColFromXPos(int xPos) { val = xPos / (pvWidth / mapManager.getCurrentTile().pCols); if (val == mapManager.getCurrentTile().pCols) { val = mapManager.getCurrentTile().pCols - 1; } return val; } /** * Given a y pixel position, return the row of the cell it is in This is * used when determining the type of adjacent Cells. * * @param yPos * y position in pixels * @return The cell this position is in */ public int getRowFromYPos(int yPos) { val = yPos / (pvHeight / mapManager.getCurrentTile().pRows); if (val == mapManager.getCurrentTile().pRows) { val = mapManager.getCurrentTile().pRows - 1; } return val; } /** * When preserving the position we need to know which cell the player is in, * so calculate it from the centre on its Rect */ public void updatePlayerCell() { plCell.x = (playerRect.left + (playerRect.width() / 2)) / (pvWidth / mapManager.getCurrentTile().pCols); plCell.y = (playerRect.top + (playerRect.height() / 2)) / (pvHeight / mapManager.getCurrentTile().pRows); if (mapManager.getCurrentTile().pMaze[plCell.y][plCell.x] == Cell.floor) { for (int row = 0; row < mapManager.getCurrentTile().pRows; row++) { for (int col = 0; col < mapManager.getCurrentTile().pCols; col++) { if (mapManager.getCurrentTile().pMaze[row][col] == Cell.pl) { mapManager.getCurrentTile().pMaze[row][col] = Cell.floor; break; } } } mapManager.getCurrentTile().pMaze[plCell.y][plCell.x] = Cell.pl; } } public Rect getRectFromPos(int x, int y) { calcCell.left = ((x / cellWidth) + 0) * cellWidth; calcCell.right = calcCell.left + cellWidth; calcCell.top = ((y / cellHeight) + 0) * cellHeight; calcCell.bottom = calcCell.top + cellHeight; Log.d(TAG, "Rect: " + calcCell + " Player: " + playerRect); return calcCell; } public void setPlayerRect(Rect newplRect) { playerRect.set(newplRect); } private void setTouchZone() { playerTouchRect.set( playerRect.left - playerRect.width() / TOUCH_ZONE, playerRect.top - playerRect.height() / TOUCH_ZONE, playerRect.right + playerRect.width() / TOUCH_ZONE, playerRect.bottom + playerRect.height() / TOUCH_ZONE); } public Rect getPlayerRect() { return playerRect; } public Point getPlayerCell() { return plCell; } public void setPlayerCell(Point cell) { plCell = cell; }

  Read the article

• Mixing Forms and Token Authentication in a single ASP.NET Application (the Details)

  - by Your DisplayName here!

  The scenario described in my last post works because of the design around HTTP modules in ASP.NET. Authentication related modules (like Forms authentication and WIF WS-Fed/Sessions) typically subscribe to three events in the pipeline – AuthenticateRequest/PostAuthenticateRequest for pre-processing and EndRequest for post-processing (like making redirects to a login page). In the pre-processing stage it is the modules’ job to determine the identity of the client based on incoming HTTP details (like a header, cookie, form post) and set HttpContext.User and Thread.CurrentPrincipal. The actual page (in the ExecuteHandler event) “sees” the identity that the last module has set. So in our case there are three modules in effect: FormsAuthenticationModule (AuthenticateRequest, EndRequest) WSFederationAuthenticationModule (AuthenticateRequest, PostAuthenticateRequest, EndRequest) SessionAuthenticationModule (AuthenticateRequest, PostAuthenticateRequest) So let’s have a look at the different scenario we have when mixing Forms auth and WS-Federation. Anoymous request to unprotected resource This is the easiest case. Since there is no WIF session cookie or a FormsAuth cookie, these modules do nothing. The WSFed module creates an anonymous ClaimsPrincipal and calls the registered ClaimsAuthenticationManager (if any) to transform it. The result (by default an anonymous ClaimsPrincipal) gets set. Anonymous request to FormsAuth protected resource This is the scenario where an anonymous user tries to access a FormsAuth protected resource for the first time. The principal is anonymous and before the page gets rendered, the Authorize attribute kicks in. The attribute determines that the user needs authentication and therefor sets a 401 status code and ends the request. Now execution jumps to the EndRequest event, where the FormsAuth module takes over. The module then converts the 401 to a redirect (302) to the forms login page. If authentication is successful, the login page sets the FormsAuth cookie.   FormsAuth authenticated request to a FormsAuth protected resource Now a FormsAuth cookie is present, which gets validated by the FormsAuth module. This cookie gets turned into a GenericPrincipal/FormsIdentity combination. The WS-Fed module turns the principal into a ClaimsPrincipal and calls the registered ClaimsAuthenticationManager. The outcome of that gets set on the context. Anonymous request to STS protected resource This time the anonymous user tries to access an STS protected resource (a controller decorated with the RequireTokenAuthentication attribute). The attribute determines that the user needs STS authentication by checking the authentication type on the current principal. If this is not Federation, the redirect to the STS will be made. After successful authentication at the STS, the STS posts the token back to the application (using WS-Federation syntax). Postback from STS authentication After the postback, the WS-Fed module finds the token response and validates the contained token. If successful, the token gets transformed by the ClaimsAuthenticationManager, and the outcome is a) stored in a session cookie, and b) set on the context. STS authenticated request to an STS protected resource This time the WIF Session authentication module kicks in because it can find the previously issued session cookie. The module re-hydrates the ClaimsPrincipal from the cookie and sets it.     FormsAuth and STS authenticated request to a protected resource This is kind of an odd case – e.g. the user first authenticated using Forms and after that using the STS. This time the FormsAuth module does its work, and then afterwards the session module stomps over the context with the session principal. In other words, the STS identity wins.   What about roles? A common way to set roles in ASP.NET is to use the role manager feature. There is a corresponding HTTP module for that (RoleManagerModule) that handles PostAuthenticateRequest. Does this collide with the above combinations? No it doesn’t! When the WS-Fed module turns existing principals into a ClaimsPrincipal (like it did with the FormsIdentity), it also checks for RolePrincipal (which is the principal type created by role manager), and turns the roles in role claims. Nice! But as you can see in the last scenario above, this might result in unnecessary work, so I would rather recommend consolidating all role work (and other claims transformations) into the ClaimsAuthenticationManager. In there you can check for the authentication type of the incoming principal and act accordingly. HTH

  Read the article

• Applications: The Mathematics of Movement, Part 3

  - by TechTwaddle

  Previously: Part 1, Part 2 As promised in the previous post, this post will cover two variations of the marble move program. The first one, Infinite Move, keeps the marble moving towards the click point, rebounding it off the screen edges and changing its direction when the user clicks again. The second version, Finite Move, is the same as first except that the marble does not move forever. It moves towards the click point, rebounds off the screen edges and slowly comes to rest. The amount of time that it moves depends on the distance between the click point and marble. Infinite Move This case is simple (actually both cases are simple). In this case all we need is the direction information which is exactly what the unit vector stores. So when the user clicks, you calculate the unit vector towards the click point and then keep updating the marbles position like crazy. And, of course, there is no stop condition. There’s a little more additional code in the bounds checking conditions. Whenever the marble goes off the screen boundaries, we need to reverse its direction.  Here is the code for mouse up event and UpdatePosition() method, //stores the unit vector double unitX = 0, unitY = 0; double speed = 6; //speed times the unit vector double incrX = 0, incrY = 0; private void Form1_MouseUp(object sender, MouseEventArgs e) {     double x = e.X - marble1.x;     double y = e.Y - marble1.y;     //calculate distance between click point and current marble position     double lenSqrd = x * x + y * y;     double len = Math.Sqrt(lenSqrd);     //unit vector along the same direction (from marble towards click point)     unitX = x / len;     unitY = y / len;     timer1.Enabled = true; } private void UpdatePosition() {     //amount by which to increment marble position     incrX = speed * unitX;     incrY = speed * unitY;     marble1.x += incrX;     marble1.y += incrY;     //check for bounds     if ((int)marble1.x < MinX + marbleWidth / 2)     {         marble1.x = MinX + marbleWidth / 2;         unitX *= -1;     }     else if ((int)marble1.x > (MaxX - marbleWidth / 2))     {         marble1.x = MaxX - marbleWidth / 2;         unitX *= -1;     }     if ((int)marble1.y < MinY + marbleHeight / 2)     {         marble1.y = MinY + marbleHeight / 2;         unitY *= -1;     }     else if ((int)marble1.y > (MaxY - marbleHeight / 2))     {         marble1.y = MaxY - marbleHeight / 2;         unitY *= -1;     } } So whenever the user clicks we calculate the unit vector along that direction and also the amount by which the marble position needs to be incremented. The speed in this case is fixed at 6. You can experiment with different values. And under bounds checking, whenever the marble position goes out of bounds along the x or y direction we reverse the direction of the unit vector along that direction. Here’s a video of it running;   Finite Move The code for finite move is almost exactly same as that of Infinite Move, except for the difference that the speed is not fixed and there is an end condition, so the marble comes to rest after a while. Code follows, //unit vector along the direction of click point double unitX = 0, unitY = 0; //speed of the marble double speed = 0; private void Form1_MouseUp(object sender, MouseEventArgs e) {     double x = 0, y = 0;     double lengthSqrd = 0, length = 0;     x = e.X - marble1.x;     y = e.Y - marble1.y;     lengthSqrd = x * x + y * y;     //length in pixels (between click point and current marble pos)     length = Math.Sqrt(lengthSqrd);     //unit vector along the same direction as vector(x, y)     unitX = x / length;     unitY = y / length;     speed = length / 12;     timer1.Enabled = true; } private void UpdatePosition() {     marble1.x += speed * unitX;     marble1.y += speed * unitY;     //check for bounds     if ((int)marble1.x < MinX + marbleWidth / 2)     {         marble1.x = MinX + marbleWidth / 2;         unitX *= -1;     }     else if ((int)marble1.x > (MaxX - marbleWidth / 2))     {         marble1.x = MaxX - marbleWidth / 2;         unitX *= -1;     }     if ((int)marble1.y < MinY + marbleHeight / 2)     {         marble1.y = MinY + marbleHeight / 2;         unitY *= -1;     }     else if ((int)marble1.y > (MaxY - marbleHeight / 2))     {         marble1.y = MaxY - marbleHeight / 2;         unitY *= -1;     }     //reduce speed by 3% in every loop     speed = speed * 0.97f;     if ((int)speed <= 0)     {         timer1.Enabled = false;     } } So the only difference is that the speed is calculated as a function of length when the mouse up event occurs. Again, this can be experimented with. Bounds checking is same as before. In the update and draw cycle, we reduce the speed by 3% in every cycle. Since speed is calculated as a function of length, speed = length/12, the amount of time it takes speed to reach zero is directly proportional to length. Note that the speed is in ‘pixels per 40ms’ because the timeout value of the timer is 40ms.  The readability can be improved by representing speed in ‘pixels per second’. This would require you to add some more calculations to the code, which I leave out as an exercise. Here’s a video of this second version,

  Read the article

• Breaking 1NF to model subset constraints. Does this sound sane?

  - by Chris Travers

  My first question here. Appologize if it is in the wrong forum but this seems pretty conceptual. I am looking at doing something that goes against conventional wisdom and want to get some feedback as to whether this is totally insane or will result in problems, so critique away! I am on PostgreSQL 9.1 but may be moving to 9.2 for this part of this project. To re-iterate: Does it seem sane to break 1NF in this way? I am not looking for debugging code so much as where people see problems that this might lead. The Problem In double entry accounting, financial transactions are journal entries with an arbitrary number of lines. Each line has either a left value (debit) or a right value (credit) which can be modelled as a single value with negatives as debits and positives as credits or vice versa. The sum of all debits and credits must equal zero (so if we go with a single amount field, sum(amount) must equal zero for each financial journal entry). SQL-based databases, pretty much required for this sort of work, have no way to express this sort of constraint natively and so any approach to enforcing it in the database seems rather complex. The Write Model The journal entries are append only. There is a possibility we will add a delete model but it will be subject to a different set of restrictions and so is not applicable here. If and when we allow deletes, we will probably do them using a simple ON DELETE CASCADE designation on the foreign key, and require that deletes go through a dedicated stored procedure which can enforce the other constraints. So inserts and selects have to be accommodated but updates and deletes do not for this task. My Proposed Solution My proposed solution is to break first normal form and model constraints on arrays of tuples, with a trigger that breaks the rows out into another table. CREATE TABLE journal_line ( entry_id bigserial primary key, account_id int not null references account(id), journal_entry_id bigint not null, -- adding references later amount numeric not null ); I would then add "table methods" to extract debits and credits for reporting purposes: CREATE OR REPLACE FUNCTION debits(journal_line) RETURNS numeric LANGUAGE sql IMMUTABLE AS $$ SELECT CASE WHEN $1.amount < 0 THEN $1.amount * -1 ELSE NULL END; $$; CREATE OR REPLACE FUNCTION credits(journal_line) RETURNS numeric LANGUAGE sql IMMUTABLE AS $$ SELECT CASE WHEN $1.amount > 0 THEN $1.amount ELSE NULL END; $$; Then the journal entry table (simplified for this example): CREATE TABLE journal_entry ( entry_id bigserial primary key, -- no natural keys :-( journal_id int not null references journal(id), date_posted date not null, reference text not null, description text not null, journal_lines journal_line[] not null ); Then a table method and and check constraints: CREATE OR REPLACE FUNCTION running_total(journal_entry) returns numeric language sql immutable as $$ SELECT sum(amount) FROM unnest($1.journal_lines); $$; ALTER TABLE journal_entry ADD CONSTRAINT CHECK (((journal_entry.running_total) = 0)); ALTER TABLE journal_line ADD FOREIGN KEY journal_entry_id REFERENCES journal_entry(entry_id); And finally we'd have a breakout trigger: CREATE OR REPLACE FUNCTION je_breakout() RETURNS TRIGGER LANGUAGE PLPGSQL AS $$ BEGIN IF TG_OP = 'INSERT' THEN INSERT INTO journal_line (journal_entry_id, account_id, amount) SELECT NEW.id, account_id, amount FROM unnest(NEW.journal_lines); RETURN NEW; ELSE RAISE EXCEPTION 'Operation Not Allowed'; END IF; END; $$; And finally CREATE TRIGGER AFTER INSERT OR UPDATE OR DELETE ON journal_entry FOR EACH ROW EXECUTE_PROCEDURE je_breaout(); Of course the example above is simplified. There will be a status table that will track approval status allowing for separation of duties, etc. However the goal here is to prevent unbalanced transactions. Any feedback? Does this sound entirely insane? Standard Solutions? In getting to this point I have to say I have looked at four different current ERP solutions to this problems: Represent every line item as a debit and a credit against different accounts. Use of foreign keys against the line item table to enforce an eventual running total of 0 Use of constraint triggers in PostgreSQL Forcing all validation here solely through the app logic. My concerns are that #1 is pretty limiting and very hard to audit internally. It's not programmer transparent and so it strikes me as being difficult to work with in the future. The second strikes me as being very complex and required a series of contraints and foreign keys against self to make work, and therefore it strikes me as complex, hard to sort out at least in my mind, and thus hard to work with. The fourth could be done as we force all access through stored procedures anyway and this is the most common solution (have the app total things up and throw an error otherwise). However, I think proof that a constraint is followed is superior to test cases, and so the question becomes whether this in fact generates insert anomilies rather than solving them. If this is a solved problem it isn't the case that everyone agrees on the solution....

  Read the article

• Access Control Service v2: Registering Web Identities in your Applications [concepts]

  - by Your DisplayName here!

  ACS v2 support two fundamental types of client identities– I like to call them “enterprise identities” (WS-*) and “web identities” (Google, LiveID, OpenId in general…). I also see two different “mind sets” when it comes to application design using the above identity types: Enterprise identities – often the fact that a client can present a token from a trusted identity provider means he is a legitimate user of the application. Trust relationships and authorization details have been negotiated out of band (often on paper). Web identities – the fact that a user can authenticate with Google et al does not necessarily mean he is a legitimate (or registered) user of an application. Typically additional steps are necessary (like filling out a form, email confirmation etc). Sometimes also a mixture of both approaches exist, for the sake of this post, I will focus on the web identity case. I got a number of questions how to implement the web identity scenario and after some conversations it turns out it is the old authentication vs. authorization problem that gets in the way. Many people use the IsAuthenticated property on IIdentity to make security decisions in their applications (or deny user=”?” in ASP.NET terms). That’s a very natural thing to do, because authentication was done inside the application and we knew exactly when the IsAuthenticated condition is true. Been there, done that. Guilty ;) The fundamental difference between these “old style” apps and federation is, that authentication is not done by the application anymore. It is done by a third party service, and in the case of web identity providers, in services that are not under our control (nor do we have a formal business relationship with these providers). Now the issue is, when you switch to ACS, and someone with a Google account authenticates, indeed IsAuthenticated is true – because that’s what he is! This does not mean, that he is also authorized to use the application. It just proves he was able to authenticate with Google. Now this obviously leads to confusion. How can we solve that? Easy answer: We have to deal with authentication and authorization separately. Job done ;) For many application types I see this general approach: Application uses ACS for authentication (maybe both enterprise and web identities, we focus on web identities but you could easily have a dual approach here) Application offers to authenticate (or sign in) via web identity accounts like LiveID, Google, Facebook etc. Application also maintains a database of its “own” users. Typically you want to store additional information about the user In such an application type it is important to have a unique identifier for your users (think the primary key of your user database). What would that be? Most web identity provider (and all the standard ACS v2 supported ones) emit a NameIdentifier claim. This is a stable ID for the client (scoped to the relying party – more on that later). Furthermore ACS emits a claims identifying the identity provider (like the original issuer concept in WIF). When you combine these two values together, you can be sure to have a unique identifier for the user, e.g.: Facebook-134952459903700\799880347 You can now check on incoming calls, if the user is already registered and if yes, swap the ACS claims with claims coming from your user database. One claims would maybe be a role like “Registered User” which can then be easily used to do authorization checks in the application. The WIF claims authentication manager is a perfect place to do the claims transformation. If the user is not registered, show a register form. Maybe you can use some claims from the identity provider to pre-fill form fields. (see here where I show how to use the Facebook API to fetch additional user properties). After successful registration (which may include other mechanisms like a confirmation email), flip the bit in your database to make the web identity a registered user. This is all very theoretical. In the next post I will show some code and provide a download link for the complete sample. More on NameIdentifier Identity providers “guarantee” that the name identifier for a given user in your application will always be the same. But different applications (in the case of ACS – different ACS namespaces) will see different name identifiers. This is by design to protect the privacy of users because identical name identifiers could be used to create “profiles” of some sort for that user. In technical terms they create the name identifier approximately like this: name identifier = Hash((Provider Internal User ID) + (Relying Party Address)) Why is this important to know? Well – when you change the name of your ACS namespace, the name identifiers will change as well and you will will lose your “connection” to your existing users. Oh an btw – never use any other claims (like email address or name) to form a unique ID – these can often be changed by users.

  Read the article

• VS2010 crashes when opening a vsp generated using VS 2012

  - by Tarun Arora

  I recently profiled some web applications using Visual Studio 2012, a vsp (Visual Studio Profile) file was generated as a result of the profiling session. I could successfully open the vsp file in Visual Studio 2012 as expected but when I tried to open the vsp file in Visual Studio 2010 the VS2010 IDE crashed. As a responsible citizen I raised bug # 762202 on Microsoft Connect site using the Microsoft Visual Studio 2012 Feedback Client. Note – In case you didn’t already know, VSP generated in Visual Studio 2012 is not backward compatible. Please refer below for the steps to reproduce the issue and the resolution of the connect bug. 1. Behaviour and Steps to Reproduce the Issue Description I have generated a vsp file by using the Visual Studio 2012 Standalone profiler. When I try and open the vsp file in Visual Studio 2010 the IDE crashes. I understand that a vsp generated by using VS 2012 cannot be opened in VS 2010, but the IDE crashing is not the behaviour I would expect to see. Steps to Reproduce the Issue 1. Pick up the Stand lone profiler from the VS 2012 installation media. The folder has both x 64 and x86 installer, since the machine I am using is x64 bit. I have installed the x64 version of the standalone profiler. 2. I have configured the system path by setting the 'environment variable' path to where the profiler is installed. In my case this is, C:\Program Files (x86)\Microsoft Visual Studio 11.0\Team Tools\Performance Tools 3. Created a new environment variable _NT_SYMBOL_PATH and set its value to CACHE*C:\SYMBOLSCACHE;SRV*C:\SYMBOLSCACHE*HTTP://MSDL.MICROSOFT.COM/DOWNLOAD/SYMBOLS;\\FOO\BUILD1234 4. Open up CMD as an administrator and run 'VSPerfASPNETCmd /tip http://localhost:56180/ /o:C:\Temp\SampleEISK.vsp' 5. This generates the following message on the cmd       Microsoft (R) VSPerf ASP.NET Command, Version 11.0.0.0     Copyright (C) Microsoft Corporation. All rights reserved.     Configuring and attaching to ASP.NET process. Please wait.     Setting up profiling environment.     Starting monitor.     Launching ASP.NET service.     Attaching Monitor to process.     Launching Internet Explorer.     The profiler is attached to ASP.net. Please run your application scenario now.     Press Enter to stop data collection...   6. I perform certain actions and then I come back to the cmd and hit enter to shut down the profiling. Once I do this, the following message is written to the cmd, Press Enter to stop data collection... Profiling now shut down. Report file "C:\Temp\SampleEISK.vsp" was generated. Running VsPerfReport, packing symbols into the .VSP. Shutting down profiling and restarting ASP.NET. Please wait. Restarting w3wp.exe.   7. I look in the C:\Temp folder and I can see the SampleEISK.vsp file generated. I can successfully open this file in Visual Studio 2012. 8. When I am trying to open the vsp file in VS 2010 the VS 2010 IDE crashes. Kaboooom! What I would expect to happen I expect to receive a message "VS 2010 does not support the vsp file generated by VS 2012". What actually happened The VS 2010 IDE crashed 2. Resolution This is a valid bug! However, there isn’t much value in releasing a hotfix for this issue. Refer below to the resolution provided by the Visual Studio Profiler Team.  Thank you for taking the time to report this issue. We completely agree that Visual Studio 2010 should not crash. However in this particular case this is not a bug we are going to retroactively release a fix to 2010 for at this point. Given that a fix would not unblock the scenario of opening a 2012 created file on Visual Studio 2010, and there is not an active update channel for Visual Studio 2010 other than manually locating and installing hot fixes, we will not be fixing this particular issue. Best Regards, Visual Studio Profiler Team   Though it would be great to improve the behaviour however, this is not a defect that would stop you from progressing in any way. It’s important to note however that VSP files generated by Visual Studio 2012 are not backward compatible so you should refrain from opening these files in Visual Studio 2010.

  Read the article

• Coherence Data Guarantees for Data Reads - Basic Terminology

  - by jpurdy

  When integrating Coherence into applications, each application has its own set of requirements with respect to data integrity guarantees. Developers often describe these requirements using expressions like "avoiding dirty reads" or "making sure that updates are transactional", but we often find that even in a small group of people, there may be a wide range of opinions as to what these terms mean. This may simply be due to a lack of familiarity, but given that Coherence sits at an intersection of several (mostly) unrelated fields, it may be a matter of conflicting vocabularies (e.g. "consistency" is similar but different in transaction processing versus multi-threaded programming). Since almost all data read consistency issues are related to the concept of concurrency, it is helpful to start with a definition of that, or rather what it means for two operations to be concurrent. Rather than implying that they occur "at the same time", concurrency is a slightly weaker statement -- it simply means that it can't be proven that one event precedes (or follows) the other. As an example, in a Coherence application, if two client members mutate two different cache entries sitting on two different cache servers at roughly the same time, it is likely that one update will precede the other by a significant amount of time (say 0.1ms). However, since there is no guarantee that all four members have their clocks perfectly synchronized, and there is no way to precisely measure the time it takes to send a given message between any two members (that have differing clocks), we consider these to be concurrent operations since we can not (easily) prove otherwise. So this leads to a question that we hear quite frequently: "Are the contents of the near cache always synchronized with the underlying distributed cache?". It's easy to see that if an update on a cache server results in a message being sent to each near cache, and then that near cache being updated that there is a window where the contents are different. However, this is irrelevant, since even if the application reads directly from the distributed cache, another thread update the cache before the read is returned to the application. Even if no other member modifies a cache entry prior to the local near cache entry being updated (and subsequently read), the purpose of reading a cache entry is to do something with the result, usually either displaying for consumption by a human, or by updating the entry based on the current state of the entry. In the former case, it's clear that if the data is updated faster than a human can perceive, then there is no problem (and in many cases this can be relaxed even further). For the latter case, the application must assume that the value might potentially be updated before it has a chance to update it. This almost aways the case with read-only caches, and the solution is the traditional optimistic transaction pattern, which requires the application to explicitly state what assumptions it made about the old value of the cache entry. If the application doesn't want to bother stating those assumptions, it is free to lock the cache entry prior to reading it, ensuring that no other threads will mutate the entry, a pessimistic approach. The optimistic approach relies on what is sometimes called a "fuzzy read". In other words, the application assumes that the read should be correct, but it also acknowledges that it might not be. (I use the qualifier "sometimes" because in some writings, "fuzzy read" indicates the situation where the application actually sees an original value and then later sees an updated value within the same transaction -- however, both definitions are roughly equivalent from an application design perspective). If the read is not correct it is called a "stale read". Going back to the definition of concurrency, it may seem difficult to precisely define a stale read, but the practical way of detecting a stale read is that is will cause the encompassing transaction to roll back if it tries to update that value. The pessimistic approach relies on a "coherent read", a guarantee that the value returned is not only the same as the primary copy of that value, but also that it will remain that way. In most cases this can be used interchangeably with "repeatable read" (though that term has additional implications when used in the context of a database system). In none of cases above is it possible for the application to perform a "dirty read". A dirty read occurs when the application reads a piece of data that was never committed. In practice the only way this can occur is with multi-phase updates such as transactions, where a value may be temporarily update but then withdrawn when a transaction is rolled back. If another thread sees that value prior to the rollback, it is a dirty read. If an application uses optimistic transactions, dirty reads will merely result in a lack of forward progress (this is actually one of the main risks of dirty reads -- they can be chained and potentially cause cascading rollbacks). The concepts of dirty reads, fuzzy reads, stale reads and coherent reads are able to describe the vast majority of requirements that we see in the field. However, the important thing is to define the terms used to define requirements. A quick web search for each of the terms in this article will show multiple meanings, so I've selected what are generally the most common variations, but it never hurts to state each definition explicitly if they are critical to the success of a project (many applications have sufficiently loose requirements that precise terminology can be avoided).

  Read the article

• What to leave when you're leaving

  - by BuckWoody

  There's already a post on this topic - sort of. I read this entry, where the author did a good job on a few steps, but I found that a few other tips might be useful, so if you want to check that one out and then this post, you might be able to put together your own plan for when you leave your job.  I once took over the system administrator (of which the Oracle and SQL Server servers were a part) at a mid-sized firm. The outgoing administrator had about a two- week-long scheduled overlap with me, but was angry at the company and told me "hey, I know this is going to be hard on you, but I want them to know how important I was. I'm not telling you where anything is or what the passwords are. Good luck!" He then quit that day. It took me about three days to find all of the servers and crack the passwords. Yes, the company tried to take legal action against the guy and all that, but he moved back to his home country and so largely got away with it. Obviously, this isn't the way to leave a job. Many of us have changed jobs in the past, and most of us try to be very professional about the transition to a new team, regardless of the feelings about a particular company. I've been treated badly at a firm, but that is no reason to leave a mess for someone else. So here's what you should put into place at a minimum before you go. Most of this is common sense - which of course isn't very common these days - and another good rule is just to ask yourself "what would I want to know"? The article I referenced at the top of this post focuses on a lot of documentation of the systems. I think that's fine, but in actuality, I really don't need that. Even with this kind of documentation, I still perform a full audit on the systems, so in the end I create my own system documentation. There are actually only four big items I need to know to get started with the systems: 1. Where is everything/everybody?The first thing I need to know is where all of the systems are. I mean not only the street address, but the closet or room, the rack number, the IU number in the rack, the SAN luns, all that. A picture here is worth a thousand words, which is why I really like Visio. It combines nice graphics, full text and all that. But use whatever you have to tell someone the physical locations of the boxes. Also, tell them the physical location of the folks in charge of those boxes (in case you aren't) or who share that responsibility. And by "where" in this case, I mean names and phones.  2. What do they do?For both the servers and the people, tell them what they do. If it's a database server, detail what each database does and what application goes to that, and who "owns" that application. In my mind, this is one of hte most important things a Data Professional needs to know. In the case of the other administrtors or co-owners, document each person's responsibilities.   3. What are the credentials?Logging on/in and gaining access to the buildings are things that the new Data Professional will need to do to successfully complete their job. This means service accounts, certificates, all of that. The first thing they should do, of course, is change the passwords on all that, but the first thing they need is the ability to do that!  4. What is out of the ordinary?This is the most tricky, and perhaps the next most important thing to know. Did you have to use a "special" driver for that video card on server X? Is the person that co-owns an application with you mentally unstable (like me) or have special needs, like "don't talk to Buck before he's had coffee. Nothing will make any sense"? Do you have service pack requirements for a specific setup? Write all that down. Anything that took you a day or longer to make work is probably a candidate here. This is my short list - anything you care to add? Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Is it feasible and useful to auto-generate some code of unit tests?

  - by skiwi

  Earlier today I have come up with an idea, based upon a particular real use case, which I would want to have checked for feasability and usefulness. This question will feature a fair chunk of Java code, but can be applied to all languages running inside a VM, and maybe even outside. While there is real code, it uses nothing language-specific, so please read it mostly as pseudo code. The idea Make unit testing less cumbersome by adding in some ways to autogenerate code based on human interaction with the codebase. I understand this goes against the principle of TDD, but I don't think anyone ever proved that doing TDD is better over first creating code and then immediatly therafter the tests. This may even be adapted to be fit into TDD, but that is not my current goal. To show how it is intended to be used, I'll copy one of my classes here, for which I need to make unit tests. public class PutMonsterOnFieldAction implements PlayerAction { private final int handCardIndex; private final int fieldMonsterIndex; public PutMonsterOnFieldAction(final int handCardIndex, final int fieldMonsterIndex) { this.handCardIndex = Arguments.requirePositiveOrZero(handCardIndex, "handCardIndex"); this.fieldMonsterIndex = Arguments.requirePositiveOrZero(fieldMonsterIndex, "fieldCardIndex"); } @Override public boolean isActionAllowed(final Player player) { Objects.requireNonNull(player, "player"); Hand hand = player.getHand(); Field field = player.getField(); if (handCardIndex >= hand.getCapacity()) { return false; } if (fieldMonsterIndex >= field.getMonsterCapacity()) { return false; } if (field.hasMonster(fieldMonsterIndex)) { return false; } if (!(hand.get(handCardIndex) instanceof MonsterCard)) { return false; } return true; } @Override public void performAction(final Player player) { Objects.requireNonNull(player); if (!isActionAllowed(player)) { throw new PlayerActionNotAllowedException(); } Hand hand = player.getHand(); Field field = player.getField(); field.setMonster(fieldMonsterIndex, (MonsterCard)hand.play(handCardIndex)); } } We can observe the need for the following tests: Constructor test with valid input Constructor test with invalid inputs isActionAllowed test with valid input isActionAllowed test with invalid inputs performAction test with valid input performAction test with invalid inputs My idea mainly focuses on the isActionAllowed test with invalid inputs. Writing these tests is not fun, you need to ensure a number of conditions and you check whether it really returns false, this can be extended to performAction, where an exception needs to be thrown in that case. The goal of my idea is to generate those tests, by indicating (through GUI of IDE hopefully) that you want to generate tests based on a specific branch. The implementation by example User clicks on "Generate code for branch if (handCardIndex >= hand.getCapacity())". Now the tool needs to find a case where that holds. (I haven't added the relevant code as that may clutter the post ultimately) To invalidate the branch, the tool needs to find a handCardIndex and hand.getCapacity() such that the condition >= holds. It needs to construct a Player with a Hand that has a capacity of at least 1. It notices that the capacity private int of Hand needs to be at least 1. It searches for ways to set it to 1. Fortunately it finds a constructor that takes the capacity as an argument. It uses 1 for this. Some more work needs to be done to succesfully construct a Player instance, involving the creation of objects that have constraints that can be seen by inspecting the source code. It has found the hand with the least capacity possible and is able to construct it. Now to invalidate the test it will need to set handCardIndex = 1. It constructs the test and asserts it to be false (the returned value of the branch) What does the tool need to work? In order to function properly, it will need the ability to scan through all source code (including JDK code) to figure out all constraints. Optionally this could be done through the javadoc, but that is not always used to indicate all constraints. It could also do some trial and error, but it pretty much stops if you cannot attach source code to compiled classes. Then it needs some basic knowledge of what the primitive types are, including arrays. And it needs to be able to construct some form of "modification trees". The tool knows that it needs to change a certain variable to a different value in order to get the correct testcase. Hence it will need to list all possible ways to change it, without using reflection obviously. What this tool will not replace is the need to create tailored unit tests that tests all kinds of conditions when a certain method actually works. It is purely to be used to test methods when they invalidate constraints. My questions: Is creating such a tool feasible? Would it ever work, or are there some obvious problems? Would such a tool be useful? Is it even useful to automatically generate these testcases at all? Could it be extended to do even more useful things? Does, by chance, such a project already exist and would I be reinventing the wheel? If not proven useful, but still possible to make such thing, I will still consider it for fun. If it's considered useful, then I might make an open source project for it depending on the time. For people searching more background information about the used Player and Hand classes in my example, please refer to this repository. At the time of writing the PutMonsterOnFieldAction has not been uploaded to the repo yet, but this will be done once I'm done with the unit tests.

  Read the article

• Plagued by multithreaded bugs

  - by koncurrency

  On my new team that I manage, the majority of our code is platform, TCP socket, and http networking code. All C++. Most of it originated from other developers that have left the team. The current developers on the team are very smart, but mostly junior in terms of experience. Our biggest problem: multi-threaded concurrency bugs. Most of our class libraries are written to be asynchronous by use of some thread pool classes. Methods on the class libraries often enqueue long running taks onto the thread pool from one thread and then the callback methods of that class get invoked on a different thread. As a result, we have a lot of edge case bugs involving incorrect threading assumptions. This results in subtle bugs that go beyond just having critical sections and locks to guard against concurrency issues. What makes these problems even harder is that the attempts to fix are often incorrect. Some mistakes I've observed the team attempting (or within the legacy code itself) includes something like the following: Common mistake #1 - Fixing concurrency issue by just put a lock around the shared data, but forgetting about what happens when methods don't get called in an expected order. Here's a very simple example: void Foo::OnHttpRequestComplete(statuscode status) { m_pBar->DoSomethingImportant(status); } void Foo::Shutdown() { m_pBar->Cleanup(); delete m_pBar; m_pBar=nullptr; } So now we have a bug in which Shutdown could get called while OnHttpNetworkRequestComplete is occuring on. A tester finds the bug, captures the crash dump, and assigns the bug to a developer. He in turn fixes the bug like this. void Foo::OnHttpRequestComplete(statuscode status) { AutoLock lock(m_cs); m_pBar->DoSomethingImportant(status); } void Foo::Shutdown() { AutoLock lock(m_cs); m_pBar->Cleanup(); delete m_pBar; m_pBar=nullptr; } The above fix looks good until you realize there's an even more subtle edge case. What happens if Shutdown gets called before OnHttpRequestComplete gets called back? The real world examples my team has are even more complex, and the edge cases are even harder to spot during the code review process. Common Mistake #2 - fixing deadlock issues by blindly exiting the lock, wait for the other thread to finish, then re-enter the lock - but without handling the case that the object just got updated by the other thread! Common Mistake #3 - Even though the objects are reference counted, the shutdown sequence "releases" it's pointer. But forgets to wait for the thread that is still running to release it's instance. As such, components are shutdown cleanly, then spurious or late callbacks are invoked on an object in an state not expecting any more calls. There are other edge cases, but the bottom line is this: Multithreaded programming is just plain hard, even for smart people. As I catch these mistakes, I spend time discussing the errors with each developer on developing a more appropriate fix. But I suspect they are often confused on how to solve each issue because of the enormous amount of legacy code that the "right" fix will involve touching. We're going to be shipping soon, and I'm sure the patches we're applying will hold for the upcoming release. Afterwards, we're going to have some time to improve the code base and refactor where needed. We won't have time to just re-write everything. And the majority of the code isn't all that bad. But I'm looking to refactor code such that threading issues can be avoided altogether. One approach I am considering is this. For each significant platform feature, have a dedicated single thread where all events and network callbacks get marshalled onto. Similar to COM apartment threading in Windows with use of a message loop. Long blocking operations could still get dispatched to a work pool thread, but the completion callback is invoked on on the component's thread. Components could possibly even share the same thread. Then all the class libraries running inside the thread can be written under the assumption of a single threaded world. Before I go down that path, I am also very interested if there are other standard techniques or design patterns for dealing with multithreaded issues. And I have to emphasize - something beyond a book that describes the basics of mutexes and semaphores. What do you think? I am also interested in any other approaches to take towards a refactoring process. Including any of the following: Literature or papers on design patterns around threads. Something beyond an introduction to mutexes and semaphores. We don't need massive parallelism either, just ways to design an object model so as to handle asynchronous events from other threads correctly. Ways to diagram the threading of various components, so that it will be easy to study and evolve solutions for. (That is, a UML equivalent for discussing threads across objects and classes) Educating your development team on the issues with multithreaded code. What would you do?

  Read the article

• Guide to reduce TFS database growth using the Test Attachment Cleaner

  - by terje

  Recently there has been several reports on TFS databases growing too fast and growing too big.  Notable this has been observed when one has started to use more features of the Testing system.  Also, the TFS 2010 handles test results differently from TFS 2008, and this leads to more data stored in the TFS databases. As a consequence of this there has been released some tools to remove unneeded data in the database, and also some fixes to correct for bugs which has been found and corrected during this process.  Further some preventive practices and maintenance rules should be adopted. A lot of people have blogged about this, among these are: Anu’s very important blog post here describes both the problem and solutions to handle it.  She describes both the Test Attachment Cleaner tool, and also some QFE/CU releases to fix some underlying bugs which prevented the tool from being fully effective. Brian Harry’s blog post here describes the problem too This forum thread describes the problem with some solution hints. Ravi Shanker’s blog post here describes best practices on solving this (TBP) Grant Holidays blogpost here describes strategies to use the Test Attachment Cleaner both to detect space problems and how to rectify them.   The problem can be divided into the following areas: Publishing of test results from builds Publishing of manual test results and their attachments in particular Publishing of deployment binaries for use during a test run Bugs in SQL server preventing total cleanup of data (All the published data above is published into the TFS database as attachments.) The test results will include all data being collected during the run.  Some of this data can grow rather large, like IntelliTrace logs and video recordings.   Also the pushing of binaries which happen for automated test runs, including tests run during a build using code coverage which will include all the files in the deployment folder, contributes a lot to the size of the attached data.   In order to handle this systematically, I have set up a 3-stage process: Find out if you have a database space issue Set up your TFS server to minimize potential database issues If you have the “problem”, clean up the database and otherwise keep it clean   Analyze the data Are your database( s) growing ?  Are unused test results growing out of proportion ? To find out about this you need to query your TFS database for some of the information, and use the Test Attachment Cleaner (TAC) to obtain some  more detailed information. If you don’t have too many databases you can use the SQL Server reports from within the Management Studio to analyze the database and table sizes. Or, you can use a set of queries . I find queries often faster to use because I can tweak them the way I want them.  But be aware that these queries are non-documented and non-supported and may change when the product team wants to change them. If you have multiple Project Collections, find out which might have problems: (Disclaimer: The queries below work on TFS 2010. They will not work on Dev-11, since the table structure have been changed.  I will try to update them for Dev-11 when it is released.) Open a SQL Management Studio session onto the SQL Server where you have your TFS Databases. Use the query below to find the Project Collection databases and their sizes, in descending size order.  use master select DB_NAME(database_id) AS DBName, (size/128) SizeInMB FROM sys.master_files where type=0 and substring(db_name(database_id),1,4)='Tfs_' and DB_NAME(database_id)<>'Tfs_Configuration' order by size desc Doing this on one of our SQL servers gives the following results: It is pretty easy to see on which collection to start the work   Find out which tables are possibly too large Keep a special watch out for the Tfs_Attachment table. Use the script at the bottom of Grant’s blog to find the table sizes in descending size order. In our case we got this result: From Grant’s blog we learnt that the tbl_Content is in the Version Control category, so the major only big issue we have here is the tbl_AttachmentContent.   Find out which team projects have possibly too large attachments In order to use the TAC to find and eventually delete attachment data we need to find out which team projects have these attachments. The team project is a required parameter to the TAC. Use the following query to find this, replace the collection database name with whatever applies in your case:   use Tfs_DefaultCollection select p.projectname, sum(a.compressedlength)/1024/1024 as sizeInMB from dbo.tbl_Attachment as a inner join tbl_testrun as tr on a.testrunid=tr.testrunid inner join tbl_project as p on p.projectid=tr.projectid group by p.projectname order by sum(a.compressedlength) desc In our case we got this result (had to remove some names), out of more than 100 team projects accumulated over quite some years: As can be seen here it is pretty obvious the “Byggtjeneste – Projects” are the main team project to take care of, with the ones on lines 2-4 as the next ones.  Check which attachment types takes up the most space It can be nice to know which attachment types takes up the space, so run the following query: use Tfs_DefaultCollection select a.attachmenttype, sum(a.compressedlength)/1024/1024 as sizeInMB from dbo.tbl_Attachment as a inner join tbl_testrun as tr on a.testrunid=tr.testrunid inner join tbl_project as p on p.projectid=tr.projectid group by a.attachmenttype order by sum(a.compressedlength) desc We then got this result: From this it is pretty obvious that the problem here is the binary files, as also mentioned in Anu’s blog. Check which file types, by their extension, takes up the most space Run the following query use Tfs_DefaultCollection select SUBSTRING(filename,len(filename)-CHARINDEX('.',REVERSE(filename))+2,999)as Extension, sum(compressedlength)/1024 as SizeInKB from tbl_Attachment group by SUBSTRING(filename,len(filename)-CHARINDEX('.',REVERSE(filename))+2,999) order by sum(compressedlength) desc This gives a result like this:   Now you should have collected enough information to tell you what to do – if you got to do something, and some of the information you need in order to set up your TAC settings file, both for a cleanup and for scheduled maintenance later.    Get your TFS server and environment properly set up Even if you have got the problem or if have yet not got the problem, you should ensure the TFS server is set up so that the risk of getting into this problem is minimized.  To ensure this you should install the following set of updates and components. The assumption is that your TFS Server is at SP1 level. Install the QFE for KB2608743 – which also contains detailed instructions on its use, download from here. The QFE changes the default settings to not upload deployed binaries, which are used in automated test runs. Binaries will still be uploaded if: Code coverage is enabled in the test settings. You change the UploadDeploymentItem to true in the testsettings file. Be aware that this might be reset back to false by another user which haven't installed this QFE. The hotfix should be installed to The build servers (the build agents) The machine hosting the Test Controller Local development computers (Visual Studio) Local test computers (MTM) It is not required to install it to the TFS Server, test agents or the build controller – it has no effect on these programs. If you use the SQL Server 2008 R2 you should also install the CU 10 (or later).  This CU fixes a potential problem of hanging “ghost” files.  This seems to happen only in certain trigger situations, but to ensure it doesn’t bite you, it is better to make sure this CU is installed. There is no such CU for SQL Server 2008 pre-R2 Work around:  If you suspect hanging ghost files, they can be – with some mental effort, deduced from the ghost counters using the following SQL query: use master SELECT DB_NAME(database_id) as 'database',OBJECT_NAME(object_id) as 'objectname', index_type_desc,ghost_record_count,version_ghost_record_count,record_count,avg_record_size_in_bytes FROM sys.dm_db_index_physical_stats (DB_ID(N'<DatabaseName>'), OBJECT_ID(N'<TableName>'), NULL, NULL , 'DETAILED') The problem is a stalled ghost cleanup process.  Restarting the SQL server after having stopped all components that depends on it, like the TFS Server and SPS services – that is all applications that connect to the SQL server. Then restart the SQL server, and finally start up all dependent processes again.  (I would guess a complete server reboot would do the trick too.) After this the ghost cleanup process will run properly again. The fix will come in the next CU cycle for SQL Server R2 SP1.  The R2 pre-SP1 and R2 SP1 have separate maintenance cycles, and are maintained individually. Each have its own set of CU’s. When it comes I will add the link here to that CU. The "hanging ghost file” issue came up after one have run the TAC, and deleted enourmes amount of data.  The SQL Server can get into this hanging state (without the QFE) in certain cases due to this. And of course, install and set up the Test Attachment Cleaner command line power tool.  This should be done following some guidelines from Ravi Shanker: “When you run TAC, ensure that you are deleting small chunks of data at regular intervals (say run TAC every night at 3AM to delete data that is between age 730 to 731 days) – this will ensure that small amounts of data are being deleted and SQL ghosted record cleanup can catch up with the number of deletes performed. “ This rule minimizes the risk of the ghosted hang problem to occur, and further makes it easier for the SQL server ghosting process to work smoothly. “Run DBCC SHRINKDB post the ghosted records are cleaned up to physically reclaim the space on the file system” This is the last step in a 3 step process of removing SQL server data. First they are logically deleted. Then they are cleaned out by the ghosting process, and finally removed using the shrinkdb command. Cleaning out the attachments The TAC is run from the command line using a set of parameters and controlled by a settingsfile.  The parameters point out a server uri including the team project collection and also point at a specific team project. So in order to run this for multiple team projects regularly one has to set up a script to run the TAC multiple times, once for each team project.  When you install the TAC there is a very useful readme file in the same directory. When the deployment binaries are published to the TFS server, ALL items are published up from the deployment folder. That often means much more files than you would assume are necessary. This is a brute force technique. It works, but you need to take care when cleaning up. Grant has shown how their settings file looks in his blog post, removing all attachments older than 180 days , as long as there are no active workitems connected to them. This setting can be useful to clean out all items, both in a clean-up once operation, and in a general There are two scenarios we need to consider: Cleaning up an existing overgrown database Maintaining a server to avoid an overgrown database using scheduled TAC   1. Cleaning up a database which has grown too big due to these attachments. This job is a “Once” job.  We do this once and then move on to make sure it won’t happen again, by taking the actions in 2) below.  In this scenario you should only consider the large files. Your goal should be to simply reduce the size, and don’t bother about  the smaller stuff. That can be left a scheduled TAC cleanup ( 2 below). Here you can use a very general settings file, and just remove the large attachments, or you can choose to remove any old items.  Grant’s settings file is an example of the last one.  A settings file to remove only large attachments could look like this: <!-- Scenario : Remove large files --> <DeletionCriteria> <TestRun /> <Attachment> <SizeInMB GreaterThan="10" /> </Attachment> </DeletionCriteria> Or like this: If you want only to remove dll’s and pdb’s about that size, add an Extensions-section.  Without that section, all extensions will be deleted. <!-- Scenario : Remove large files of type dll's and pdb's --> <DeletionCriteria> <TestRun /> <Attachment> <SizeInMB GreaterThan="10" /> <Extensions> <Include value="dll" /> <Include value="pdb" /> </Extensions> </Attachment> </DeletionCriteria> Before you start up your scheduled maintenance, you should clear out all older items. 2. Scheduled maintenance using the TAC If you run a schedule every night, and remove old items, and also remove them in small batches.  It is important to run this often, like every night, in order to keep the number of deleted items low. That way the SQL ghost process works better. One approach could be to delete all items older than some number of days, let’s say 180 days. This could be combined with restricting it to keep attachments with active or resolved bugs.  Doing this every night ensures that only small amounts of data is deleted. <!-- Scenario : Remove old items except if they have active or resolved bugs --> <DeletionCriteria> <TestRun> <AgeInDays OlderThan="180" /> </TestRun> <Attachment /> <LinkedBugs> <Exclude state="Active" /> <Exclude state="Resolved"/> </LinkedBugs> </DeletionCriteria> In my experience there are projects which are left with active or resolved workitems, akthough no further work is done.  It can be wise to have a cleanup process with no restrictions on linked bugs at all. Note that you then have to remove the whole LinkedBugs section. A approach which could work better here is to do a two step approach, use the schedule above to with no LinkedBugs as a sweeper cleaning task taking away all data older than you could care about.  Then have another scheduled TAC task to take out more specifically attachments that you are not likely to use. This task could be much more specific, and based on your analysis clean out what you know is troublesome data. <!-- Scenario : Remove specific files early --> <DeletionCriteria> <TestRun > <AgeInDays OlderThan="30" /> </TestRun> <Attachment> <SizeInMB GreaterThan="10" /> <Extensions> <Include value="iTrace"/> <Include value="dll"/> <Include value="pdb"/> <Include value="wmv"/> </Extensions> </Attachment> <LinkedBugs> <Exclude state="Active" /> <Exclude state="Resolved" /> </LinkedBugs> </DeletionCriteria> The readme document for the TAC says that it recognizes “internal” extensions, but it does recognize any extension. To run the tool do the following command: tcmpt attachmentcleanup /collection:your_tfs_collection_url /teamproject:your_team_project /settingsfile:path_to_settingsfile /outputfile:%temp%/teamproject.tcmpt.log /mode:delete   Shrinking the database You could run a shrink database command after the TAC has run in cases where there are a lot of data being deleted.  In this case you SHOULD do it, to free up all that space.  But, after the shrink operation you should do a rebuild indexes, since the shrink operation will leave the database in a very fragmented state, which will reduce performance. Note that you need to rebuild indexes, reorganizing is not enough. For smaller amounts of data you should NOT shrink the database, since the data will be reused by the SQL server when it need to add more records.  In fact, it is regarded as a bad practice to shrink the database regularly.  So on a daily maintenance schedule you should NOT shrink the database. To shrink the database you do a DBCC SHRINKDATABASE command, and then follow up with a DBCC INDEXDEFRAG afterwards.  I find the easiest way to do this is to create a SQL Maintenance plan including the Shrink Database Task and the Rebuild Index Task and just execute it when you need to do this.

  Read the article

• Setting up and using Bing Translate API Service for Machine Translation

  - by Rick Strahl

  Last week I spent quite a bit of time trying to set up the Bing Translate API service. I can honestly say this was one of the most screwed up developer experiences I've had in a long while - specifically related to the byzantine sign up process that Microsoft has in place. Not only is it nearly impossible to find decent documentation on the required signup process, some of the links in the docs are just plain wrong, and some of the account pages you need to access the actual account information once signed up are not linked anywhere from the administration UI. To make things even harder is the fact that the APIs changed a while back, with a completely new authentication scheme that's described and not directly linked documentation topic also made for a very frustrating search experience. It's a bummer that this is the case too, because the actual API itself is easy to use and works very well - fast and reasonably accurate (as accurate as you can expect machine translation to be). But the sign up process is a pain in the ass doubtlessly leaving many people giving up in frustration. In this post I'll try to hit all the points needed to set up to use the Bing Translate API in one place since such a document seems to be missing from Microsoft. Hopefully the API folks at Microsoft will get their shit together and actually provide this sort of info on their site… Signing Up The first step required is to create a Windows Azure MarketPlace account. Go to: https://datamarket.azure.com/ Sign in with your Windows Live Id If you don't have an account you will be taken to a registration page which you have to fill out. Follow the links and complete the registration. Once you're signed in you can start adding services. Click on the Data Link on the main page Select Microsoft Translator from the list This adds the Microsoft Bing Translator to your services. Pricing The page shows the pricing matrix and the free service which provides 2 megabytes for translations a month for free. Prices go up steeply from there. Pricing is determined by actual bytes of the result translations used. Max translations are 1000 characters so at minimum this means you get around 2000 translations a month for free. However most translations are probable much less so you can expect larger number of translations to go through. For testing or low volume translations this should be just fine. Once signed up there are no further instructions and you're left in limbo on the MS site. Register your Application Once you've created the Data association with Translator the next step is registering your application. To do this you need to access your developer account. Go to https://datamarket.azure.com/developer/applications/register Provide a ClientId, which is effectively the unique string identifier for your application (not your customer id!) Provide your name The client secret was auto-created and this becomes your 'password' For the redirect url provide any https url: https://microsoft.com works Give this application a description of your choice so you can identify it in the list of apps Now, once you've registered your application, keep track of the ClientId and ClientSecret - those are the two keys you need to authenticate before you can call the Translate API. Oddly the applications page is hidden from the Azure Portal UI. I couldn't find a direct link from anywhere on the site back to this page where I can examine my developer application keys. To find them you can go to: https://datamarket.azure.com/developer/applications You can come back here to look at your registered applications and pick up the ClientID and ClientSecret. Fun eh? But we're now ready to actually call the API and do some translating. Using the Bing Translate API The good news is that after this signup hell, using the API is pretty straightforward. To use the translation API you'll need to actually use two services: You need to call an authentication API service first, before you can call the actual translator API. These two APIs live on different domains, and the authentication API returns JSON data while the translator service returns XML. So much for consistency. Authentication The first step is authentication. The service uses oAuth authentication with a  bearer token that has to be passed to the translator API. The authentication call retrieves the oAuth token that you can then use with the translate API call. The bearer token has a short 10 minute life time, so while you can cache it for successive calls, the token can't be cached for long periods. This means for Web backend requests you typically will have to authenticate each time unless you build a more elaborate caching scheme that takes the timeout into account (perhaps using the ASP.NET Cache object). For low volume operations you can probably get away with simply calling the auth API for every translation you do. To call the Authentication API use code like this:/// /// Retrieves an oAuth authentication token to be used on the translate /// API request. The result string needs to be passed as a bearer token /// to the translate API. /// /// You can find client ID and Secret (or register a new one) at: /// https://datamarket.azure.com/developer/applications/ /// /// The client ID of your application /// The client secret or password /// public string GetBingAuthToken(string clientId = null, string clientSecret = null) { string authBaseUrl = https://datamarket.accesscontrol.windows.net/v2/OAuth2-13; if (string.IsNullOrEmpty(clientId) || string.IsNullOrEmpty(clientSecret)) { ErrorMessage = Resources.Resources.Client_Id_and_Client_Secret_must_be_provided; return null; } var postData = string.Format("grant_type=client_credentials&client_id={0}" + "&client_secret={1}" + "&scope=http://api.microsofttranslator.com", HttpUtility.UrlEncode(clientId), HttpUtility.UrlEncode(clientSecret)); // POST Auth data to the oauth API string res, token; try { var web = new WebClient(); web.Encoding = Encoding.UTF8; res = web.UploadString(authBaseUrl, postData); } catch (Exception ex) { ErrorMessage = ex.GetBaseException().Message; return null; } var ser = new JavaScriptSerializer(); var auth = ser.Deserialize<BingAuth>(res); if (auth == null) return null; token = auth.access_token; return token; } private class BingAuth { public string token_type { get; set; } public string access_token { get; set; } } This code basically takes the client id and secret and posts it at the oAuth endpoint which returns a JSON string. Here I use the JavaScript serializer to deserialize the JSON into a custom object I created just for deserialization. You can also use JSON.NET and dynamic deserialization if you are already using JSON.NET in your app in which case you don't need the extra type. In my library that houses this component I don't, so I just rely on the built in serializer. The auth method returns a long base64 encoded string which can be used as a bearer token in the translate API call. Translation Once you have the authentication token you can use it to pass to the translate API. The auth token is passed as an Authorization header and the value is prefixed with a 'Bearer ' prefix for the string. Here's what the simple Translate API call looks like:/// /// Uses the Bing API service to perform translation /// Bing can translate up to 1000 characters. /// /// Requires that you provide a CLientId and ClientSecret /// or set the configuration values for these two. /// /// More info on setup: /// http://www.west-wind.com/weblog/ /// /// Text to translate /// Two letter culture name /// Two letter culture name /// Pass an access token retrieved with GetBingAuthToken. /// If not passed the default keys from .config file are used if any /// public string TranslateBing(string text, string fromCulture, string toCulture, string accessToken = null) { string serviceUrl = "http://api.microsofttranslator.com/V2/Http.svc/Translate"; if (accessToken == null) { accessToken = GetBingAuthToken(); if (accessToken == null) return null; } string res; try { var web = new WebClient(); web.Headers.Add("Authorization", "Bearer " + accessToken); string ct = "text/plain"; string postData = string.Format("?text={0}&from={1}&to={2}&contentType={3}", HttpUtility.UrlEncode(text), fromCulture, toCulture, HttpUtility.UrlEncode(ct)); web.Encoding = Encoding.UTF8; res = web.DownloadString(serviceUrl + postData); } catch (Exception e) { ErrorMessage = e.GetBaseException().Message; return null; } // result is a single XML Element fragment var doc = new XmlDocument(); doc.LoadXml(res); return doc.DocumentElement.InnerText; } The first of this code deals with ensuring the auth token exists. You can either pass the token into the method manually or let the method automatically retrieve the auth code on its own. In my case I'm using this inside of a Web application and in that situation I simply need to re-authenticate every time as there's no convenient way to manage the lifetime of the auth cookie. The auth token is added as an Authorization HTTP header prefixed with 'Bearer ' and attached to the request. The text to translate, the from and to language codes and a result format are passed on the query string of this HTTP GET request against the Translate API. The translate API returns an XML string which contains a single element with the translated string. Using the Wrapper Methods It should be pretty obvious how to use these two methods but here are a couple of test methods that demonstrate the two usage scenarios:[TestMethod] public void TranslateBingWithAuthTest() { var translate = new TranslationServices(); string clientId = DbResourceConfiguration.Current.BingClientId; string clientSecret = DbResourceConfiguration.Current.BingClientSecret; string auth = translate.GetBingAuthToken(clientId, clientSecret); Assert.IsNotNull(auth); string text = translate.TranslateBing("Hello World we're back home!", "en", "de",auth); Assert.IsNotNull(text, translate.ErrorMessage); Console.WriteLine(text); } [TestMethod] public void TranslateBingIntegratedTest() { var translate = new TranslationServices(); string text = translate.TranslateBing("Hello World we're back home!","en","de"); Assert.IsNotNull(text, translate.ErrorMessage); Console.WriteLine(text); } Other API Methods The Translate API has a number of methods available and this one is the simplest one but probably also the most common one that translates a single string. You can find additional methods for this API here: http://msdn.microsoft.com/en-us/library/ff512419.aspx Soap and AJAX APIs are also available and documented on MSDN: http://msdn.microsoft.com/en-us/library/dd576287.aspx These links will be your starting points for calling other methods in this API. Dual Interface I've talked about my database driven localization provider here in the past, and it's for this tool that I added the Bing localization support. Basically I have a localization administration form that allows me to translate individual strings right out of the UI, using both Google and Bing APIs: As you can see in this example, the results from Google and Bing can vary quite a bit - in this case Google is stumped while Bing actually generated a valid translation. At other times it's the other way around - it's pretty useful to see multiple translations at the same time. Here I can choose from one of the values and driectly embed them into the translated text field. Lost in Translation There you have it. As I mentioned using the API once you have all the bureaucratic crap out of the way calling the APIs is fairly straight forward and reasonably fast, even if you have to call the Auth API for every call. Hopefully this post will help out a few of you trying to navigate the Microsoft bureaucracy, at least until next time Microsoft upends everything and introduces new ways to sign up again. Until then - happy translating… Related Posts Translation method Source on Github Translating with Google Translate without Google API Keys Creating a data-driven ASP.NET Resource Provider© Rick Strahl, West Wind Technologies, 2005-2013Posted in Localization  ASP.NET  .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

< Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >