Search Results

Search found 18209 results on 729 pages for 'loop device'.

Page 122/729 | < Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >

• Ubuntu 10.04 recognizing USB 2.0 external HD as USB 1.1

  - by btucker

  When I connect the USB 2.0 drive I see this: usb 1-4.3: new full speed USB device using ohci_hcd and address 5 so I know it's getting seen as USB 1.1. usb-devices shows that it really is USB 2.0 and connected to a USB 2.0 hub: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0608 Rev=77.61 S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=13fd ProdID=1340 Rev=02.10 S: Manufacturer=Generic S: Product=External C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage It seems the problem is that root hub is: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=02.06 S: Manufacturer=Linux 2.6.32-25-server ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub And there's no mention of ehci_hcd. lsusb -t gives me: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M |__ Port 4: Dev 2, If 0, Class=hub, Driver=hub/4p, 12M |__ Port 2: Dev 4, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 3: Dev 5, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 6: Dev 3, If 0, Class=stor., Driver=usb-storage, 12M It seems like I'm missing something which would allow the OS to see USB 2.0 devices. Can anyone point me in the right direction? EDIT Full lsusb -v output: Bus 001 Device 005: ID 13fd:1340 Initio Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x13fd Initio Corporation idProduct 0x1340 bcdDevice 2.10 iManufacturer 1 Generic iProduct 2 External iSerial 3 57442D574341595930323337 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0608 USB-2.0 4-Port HUB bcdDevice 77.61 iManufacturer 0 iProduct 1 USB2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e0 Ganged power switching Ganged overcurrent protection Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.32-25-server ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0103 power enable connect Port 5: 0000.0100 power Port 6: 0000.0103 power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled

  Read the article

• How do I detect a loop in this linked list?

  - by jjujuma

  Say you have a linked list structure in Java. It's made up of Nodes: class Node { Node next; // some user data } and each Node points to the next node, except for the last Node, which has null for next. Say there is a possibility that the list can contain a loop - i.e. the final Node, instead of having a null, has a reference to one of the nodes in the list which came before it. What's the best way of writing boolean hasLoop(Node first) which would return true if the given Node is the first of a list with a loop, and false otherwise? How could you write so that it takes a finite amount of space and a reasonable amount of time?

  Read the article

• if there are multiple kernel module can drive the same device, what is the rule to choose from them?

  - by Dyno Fu

  both pcnet32 and vmxnet can drive the device. $ lspci -k ... 02:01.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 10) Subsystem: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] Flags: bus master, medium devsel, latency 64, IRQ 19 I/O ports at 2000 [size=128] [virtual] Expansion ROM at dc400000 [disabled] [size=64K] Kernel driver in use: vmxnet Kernel modules: vmxnet, pcnet32 both kernel modules are loaded, $ lsmod | grep net pcnet32 32644 0 vmxnet 17696 0 mii 5212 1 pcnet32 as you see, kernel driver in use is vmxnet. is there any policy/algorithm in kernel how to choose from the candidates?

  Read the article

• Can dd-wrt or tomato keep track of GB usage per billing period per device?

  - by Sam Hasler

  I want to be able to track the usage of each device connecting to our router so we can split up the ISP bill by usage. Can dd-wrt or tomato provide the stats I'd need to do this? Update: After a bit of googling I'm aware of a much better answer than the current one. However I suspect there's probably more answers out there for other firmwares so in the interests of getting a more diverse set of answers—­and, I'll admit, because I'm getting tired of reading through obtuse firmware documentation—I've put up a bounty. If the only answer added is the one I've found I'll be happy to accept it for the bounty, otherwise I'll add it and accept it myself, but I'm hoping for an even better answer, or at least some options for other firmwares as from looking I've seen a few other people have asked for this and there doesn't appear to be a definitive answer, let's make this it! Go lazywebs! (Sorry. I've always wanted to say that.)

  Read the article

• PHP Modify the return of a loop over and over.

  - by Joshua Anderson

  Basically I want to do a php loop that base64_encodes its self 5 times. //For example i want to encode "test" which is "dGVzdA==" then we encode "dGVzdA==" which is "ZEdWemRBPT0=" then encode "ZEdWemRBPT0=" which is "WkVkV2VtUkJQVDA9" I can't figure out how to create a loop that modifies its self each time it runs. // this is what i had function enloop($dowork){ for ($i=1; $i&lt;=5; $i++) { returns base64_encode($dowork); } } enloop($code); //THIS SCRIPT DOES THIS Repeats the encode 5 times, lets say your encodign the word test for example the output would be dGVzdA==dGVzdA==dGVzdA==dGVzdA==dGVzdA==

  Read the article

• How do I recover lost/inacessible data from my storage device?

  - by TomWij

  What steps can I take to try to recover lost or inaccessible data from any storage device? Answers: This applies to any main storage devices; eg. internal/external hard drive, USB stick, Flash memory. The most important thing is to STOP using it, any type of I/O can ruin your chances of a recovery. Click here in case you suspect corruption or bad sectors. Click here in case you suspect mechanical issues.

  Read the article

• Perl : how to interrupt/resume loop by user hitting a key?

  - by Michael Mao

  Hi all: This is for debugging purpose. I've got a for loop that generates some output to Cygwin bash's CLI. I know that I can redirect outputs to text files and use Perl or even just a normal text editor to inspect the values printed out for a particular iteration, just feel that a bit painful. What I am now thinking is, to place a special subroutine inside the for loop, so that it would be "interrupted" at the beginning of each iteration, and Perl script should only resume to run after user/programmer hits a key(the Enter Key from keyboard?) In this way I can directly inspect the values printed out during each iteration. Is there a simple way to do this, without using additional libraries/CPAN ? Many thanks to the hints/suggestions in advance.

  Read the article

• Can I use Duff's Device on an array in C?

  - by Ben Fossen

  I have a loop here and I want to make it run faster. I am passing in a large array. I recently heard of Duff's Device can it be applied to this for loop? any ideas? for (i = 0; i < dim; i++) { for (j = 0; j < dim; j++) { dst[RIDX(dim-1-j, i, dim)] = src[RIDX(i, j, dim)]; } }

  Read the article

• Generating Dynamic web pages without server side scripting

  - by Microkernel

  Hi guys, I am trying to control a media device which has lot of multimedia content that it can play using another device(remote control device) like an ipad connected to the LAN. (UPnP) I want the media device to be able to send the content listing to the remote device so that it will be rendered as a webpage on the remote controller. And actions on the webpages needs to be sent to the the device as commands to execute (like play, pause, next etc). The media device is an embedded device, hence can't have any server side scripting, all has to be done on the client side. I want the page rendered to be HTML5. So, is it possible to generate dynamic HTML5 pages using just client side scripting? Thanks a lot. I am an embedded systems developer hence clueless about the web designing stuff.

  Read the article

• Porting a GUI from a pc to a wince device - issue is with the size of the screen

  - by ame

  I have to port a GUI that is currently running on a pc, to a wince device. I have already compiled the code on a win CE platform, the problem is now with the size of the screen of the device which is smaller than some of the dialog boxes of the GUI. I could resize some them in resource view of visual studio 2005. I am unable to proceed further as a lot of screens have bitmaps mapped to them and i cannot just resize the dialog boxes without changing the corresponding bitmaps. What is the best way to proceed- my last resort would be to disable the bitmaps and redraw them at a later stage. is there some method of automatically mapping the size of the screen to all the dialog boxes so that they would automatically resize (alongwith the assocaiated buttons etc)

  Read the article

• How do I get element's className inside loop of elements?

  - by crosenblum

  I am doing a loop of all elements inside a div, and I now need to get the classname of the element that I am looping by. Then i can check if the current element's class is one, I need to do something with... // var children = parent.childNodes, child; var parentNode = divid; // start loop thru child nodes for(var node=parentNode.firstChild;node!=null;node=node.nextSibling){ var myclass = (node.className ? node.className.baseVal : node.getAttribute('class')); } But this code for getting the classname only get's null values. Any suggestions?

  Read the article

• Why doesn't Ubuntu show my wireless device after updating the kernel?

  - by Jigar Shah

  After an kernel update Ubuntu doesn't show my wireless device. How can I fix this? I checked the syslogs and it says the following: 2010-02-16 19:25:39,913 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver 2010-02-16 19:25:39,940 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:25:46,066 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:25:46,086 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:25:46,162 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:05,451 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:05,480 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:05,506 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:12,496 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:19,870 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:23,398 WARNING: modinfo for module wl failed: ERROR: modinfo: could not find module wl 2010-02-16 19:35:23,399 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver 2010-02-16 19:35:23,432 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted

  Read the article

• Write a program to generate the pattern shown using a nested for loop?

  - by josef

  Write a program to generate the pattern shown using a nested for loop? 1 0 1 1 0 1 0 1 0 1

  Read the article

• Write a program to generate the pattern shown using a nested for loop?

  - by josef

  Write a program to generate the pattern shown using a nasted for loop? o 1 2 3 4 5 6 7 8 9

  Read the article

• Can't mount home after trying to resize (bad geometry: block count exceeds size of device).

  - by Lynn

  This is on a fresh computer (super computer actually). It got to me with 15T on the home mount and 50G on the root. I tried allocating 7T to root and resizing (since I'm putting a local yum repo on this machine as it has no internet access nor will it ever). I tried following the instructions here: Centos 6.3 disk space allocation but something went wrong and the home won't mount again. Instead I get from dmesg | tail: EXT4-fs (dm-2): bad geometry: block count 4294967295 exceeds size of device (1342177280 blocks) df -h nets this output: Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup-lv_root 7.0T 3.6G 6.6T 1% / tmpfs 190G 216K 190G 1% /dev/shm /dev/sda1 485M 38M 422M 9% /boot I didn't have any files on /dev/mapper/VolGroup-lv_home. Will simply running mke2fs fix it to be mountable? What sort of options should I run it with. I've never resized volumes before or used mke2fs. I don't want to make this mess worse.

  Read the article

• Is there a way to hide the Android Device Chooser?

  - by janfsd

  Whenever I run my app I get the Android Device Chooser dialog: This is happening because I am using the Google APIs for 1.6 and trying to run the application on my Nexus one. Is there any way to make this automatically, or to not check the compatibility? Sometimes when I make a modification and quickly after I save and run the application, Eclipse will build the project and the Android Device Chooser dialog will show briefly and disappear and the app won't run. I have to click run again for it to work. Any workarounds?

  Read the article

• How do I unmount a charging device in Linux?

  - by PeanutsMonkey

  I have a mobile device attached via USB to a Linux box and wish to unmount it. I ran the command fdisk -l however it does not list a mount point. I then ran the command lsusb which yielded the screenshot below. I then proceeded to search the /dev/disk/by-id directory and was found the following file The file is a symbolic link to what appears to be /dev/sdc Questions Why does it not appear when I run the command fdisk -l? How do I unmount it properly without simply yanking the USB cord from the USB port?

  Read the article

• Why I can't draw in a loop? (Using UIView in iPhone)

  - by Tattat

  I can draw many things using this : NSString *imagePath = [[NSBundle mainBundle] pathForResource:@"dummy2.png" ofType:nil]; UIImage *img = [UIImage imageWithContentsOfFile:imagePath]; image = CGImageRetain(img.CGImage); CGRect imageRect; double x = 0; double y = 0; for (int k=0; k<someValue; k++) { x += k; y += k; imageRect.origin = CGPointMake(x, y); imageRect.size = CGSizeMake(25, 25); CGContextDrawImage(UIGraphicsGetCurrentContext(), imageRect, image); } } CGImageRelease(img.CGImage); So, it works, so, I put it into a command object's execute method. Then, I want to do similar thing, but this time, my execute method only do this: NSString *imagePath = [[NSBundle mainBundle] pathForResource:@"dummy2.png" ofType:nil]; UIImage *img = [UIImage imageWithContentsOfFile:imagePath]; image = CGImageRetain(img.CGImage); CGRect imageRect; double x = inComingX; double y = inComingY; imageRect.origin = CGPointMake(x, y); imageRect.size = CGSizeMake(25, 25); CGContextDrawImage(UIGraphicsGetCurrentContext(), imageRect, image); CGImageRelease(img.CGImage); This time, this is also a Command, and it is the execute method. But I take the for loop away. I will have another method that pass the inComingX , and inComingY into my Command object. My Drawing method is simply execute the Cmd that passed in my drawingEngine: -(void)drawInContext:(CGContextRef)context { [self.cmdToBeExecuted execute]; } I also have the assign method to assign the command,: -(void)assignCmd:(Command* )cmd{ self.cmdToBeExecuted = cmd; } And this is the way I called the drawingEngine for(int k=0; k<5; k++){ [self.drawingEngine assignCmd:[DrawingCmd setDrawingInformation:(10*k):0:@"dummy.png"]]; [self.drawingEngine setNeedsDisplay]; } It can draw, but the sad thing is it only draw the last one. Why? and how to fix it? I can draw all the things in my First code, but after I take the loop outside, and use the loop in last code, it just only draw the last one. Plz help

  Read the article

• How can I make my Virtualbox Vista see my USB device (iPad)?

  - by phil

  I have the latest VirtualBox. I have filters for the iPad. But it does not show up in my virtual Windows vista My Computer screen or virtual iTunes. When I try to right click the little USB icon and select it it says it failed because the device is busy with a previous request Result code: E_INVALIDARG (0X80070057) Component: HostUSBDevice Interface: IHostUSBDevice {173b4b44-d268-4334-a00d-b6521c9a740a} Callee: IConsole {515e8e8d-f932-4d8e-9f32-79a52aead882} Any help is greatly appreciated Note: running 64bit Windows Vista Virtual on a 64bit Windows Vista (Home Premium) EDIT: my iPad is in recovery mode, maybe why it can't be seen in virtualbox? Also my host is running Zonealarm firewall and Microsoft Security Essentials. In addition the guest has AVG antivirus. Could those programs conflict with virtualbox?

  Read the article

• How to scan for available networks for Blackberry device from application?

  - by amsiddh

  Hi All, Is there any RIM API available which will help to get the list of available network service or only Wi-Fi networks for a device and set selected network access point for any network communications? Is it possible programmatically to disable the Mobile networks like GPRS, WAP, etc? For Ex: When a application is started it should scan for WiFi connections (even if there are no previous WiFi network access points are set on device) and list the available WiFi connection. Then user will select the appropriate WiFi connection to connect for any network communication. Outside the application any internet communication (like browser or any other application) should done through same selected WiFi connection. The scanning for WiFi and setting the connection is almost similar to Blackberry WiFi Setup. If anyone know how to implement this using available RIM API and let me know its possible or not. Please share if anyone have any code snippet related to this. I am looking for OS v4.5, 4.7, and 5.0. Thanks, siddh.

  Read the article

• How would make this run with an if statement and one for loop?

  - by Nick Jacobs

  I'm trying to get this to run by using an if statment, a for loop, and a list. The list is part of the parameters. I am not sure how to write the if statement and have the program loop through all of the different words and set everything how it is supposed to be. newSndIdx=0; for i in range (8700, 12600+1): sampleValue=getSampleValueAt(sound, i) setSampleValueAt(newSnd, newSndIdx, sampleValue) newSndIdx +=1 newSndIdx=newSndIdx+500 for i in range (15700, 17600+1): sampleValue=getSampleValueAt(sound, i) setSampleValueAt(newSnd, newSndIdx, sampleValue) newSndIdx +=1 newSndIdx=newSndIdx+500 for i in range (18750, 22350+1): sampleValue=getSampleValueAt(sound, i) setSampleValueAt(newSnd, newSndIdx, sampleValue) newSndIdx +=1 newSndIdx=newSndIdx+500 for i in range (23700, 27250+1): sampleValue=getSampleValueAt(sound, i) setSampleValueAt(newSnd, newSndIdx, sampleValue) newSndIdx +=1 newSndIdx=newSndIdx+500 for i in range (106950, 115300+1): sampleValue=getSampleValueAt(sound, i) setSampleValueAt(newSnd, newSndIdx, sampleValue) newSndIdx+=1

  Read the article

• How can I retrieve data from a Western Digital Passport External Disk which is not getting recognized but getting shown as healthy in Device manager

  - by Rabimba Karanjai

  When I plug in this external harddisk It is not getting shown in the My Computer. But it gets shown perfectly well in the Device Manager When I go into the Computer Administrative panel and into the disk manager it asks me to initialize the disk Now when I try to initialize it, regardless of the method I try it shows me an error "Incorrect Function" As you can see windows tells me it is working properly. Is there anyway I can retrieve data from this?/access it? I have googled and it seems to be a frequent problem with WD drives. Anyone has any solutions on how I can get the data back?

  Read the article

• Multiple Graphics Cards on Fedora 15 (Gnome 3)

  - by Michael

  I have the (delightful) misfortune of having 3 graphics cards. They are XFX Radeon 5750s. Each drives 2 monitors via dvi. I am having a really hard time getting these running on fedora 15 (gnome 3). So my setup is 3 columns of 2 monitors (the upper monitor is mounted upside down in each column to reduce the bezel between monitors). When the (graphical) login screen comes up all 6 have the blue stripey background that must be the default, but then when I login, things get interesting. In the xorg.conf below, you will see only 2 of the screens in the serverlayout while the other 4 are commented out. Logging in with only 2 of the screens active works well (and it even remembers that the top one is upside down, and should be considered above the lower, i am not sure where it stores this info, but i set it using the graphical "Displays" settings) However, as soon as I uncomment a third screen, or more, it gives me an error message when I login. It's one of those friendly, less helpful messages (Oh no! Something has gone wrong. A problem has occurred and the system can't recover. Please log out and try again). If i do not use an xorg.conf, then the "Displays" prefs pane shows only the two monitors on one of my graphics cards Thanks to anyone who can help me get going! (xorg.conf and then lspci below, and xorg log) xorg.conf Section "ServerLayout" Identifier "X.org Configured" Screen "Screen0" 0 0 Screen "Screen1" Below "Screen0" # Screen "Screen2" RightOf "Screen0" # Screen "Screen3" RightOf "Screen1" # Screen "Screen4" RightOf "Screen3" # Screen "Screen5" RightOf "Screen4" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "catalogue:/etc/X11/fontpath.d" FontPath "built-ins" EndSection Section "Module" Load "record" Load "dri" Load "dbe" Load "extmod" Load "dri2" Load "glx" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor3" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor4" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor5" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" Identifier "Card0" Driver "radeon" BusID "PCI:4:0:0" EndSection Section "Device" Identifier "Card1" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Card2" Driver "radeon" BusID "PCI:6:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card0" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Card1" Monitor "Monitor2" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Card1" Monitor "Monitor3" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen4" Device "Card2" Monitor "Monitor4" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen5" Device "Card2" Monitor "Monitor5" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection lspci output follows [tgm@tgm ~]$ lspci 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 02:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:02.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 04:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 04:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 05:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 05:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 06:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 06:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) xorg log (posted to fpaste due to how long it is. thanks to marcusw for the request) http://www.fpaste.org/r5ww/ xorg log with all 6 monitors enabled in xorg.conf (they all turn on and have blue, but then one gets the aforementioned user-friendly error message). http://www.fpaste.org/X63H/

  Read the article

• Reverse lookup of inode/file from offset in raw device on linux and ext3/4?

  - by lilinjn

  In linux, given an offset into a raw disk device, is it possible to map back to an partition + inode? For example, suppose I know that string "xyz" is contained at byte offset 1000000 on /dev/sda: (e.g. xxd -l 100 -s 1000000 /dev/sda shows a dump that begins with "xyz") 1) How do I figure out which partition (if any) offset 1000000 is located in?(I imagine this is easy, but am including it for completeness) 2) Assuming the offset is located in a partition, how do I go about finding which inode it belongs to (or determine that it is part of free space) ? Presumably this is filesystem specific, in which case does any one know how to do this for ext4 and ext3?

  Read the article

• Write a program to generate the pattern shown using a nasted for loop?

  - by josef

  Write a program to generate the pattern shown using a nasted for loop? o 1 2 3 4 5 6 7 8 9

  Read the article

< Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >