Search Results

Search found 12924 results on 517 pages for 'module pattern'.

Page 122/517 | < Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >

• LightDM will not start after stopping it

  - by Sweeters

  I am running Ubuntu 11.10 "Oneiric Ocelot", and in trying to install the nvidia CUDA developer drivers I switched to a virtual terminal (Ctrl-Alt-F5) and stopped lightdm (installation required that no X server instance be running) through sudo service lightdm stop. Re-starting lightdm with sudo service lightdm start did not work: A couple of * Starting [...] lines where displayed, but the process hanged. (I do not remember at which point, but I think it was * Starting System V runlevel compatibility. I manually rebooted my laptop, and ever since booting seems to hang, usually around the * Starting anac(h)ronistic cron [OK] log line (not consistently at that point, though). From that point on, I seem to be able to interact with my system only through a tty session (Ctrl-Alt-F1). I've tried purging and reinstalling both lightdm and gdm, as well as selecting both as the default display managers (through sudo dpkg-reconfigure [lightdm / gdm] or by manually editing /etc/X11/default-display-manager) through both apt-get and aptitude (that shouldn't make a difference anyway) after updating the packages, but the problem persists. Some of the responses I'm getting are the following: After running sudo dpkg-reconfigure lightdm (but not ... gdm) I get the following message: dpkg-maintscript-helper:warning: environment variable DPKG_MATINSCRIPT_NAME missing dpkg-maintscript-helper:warning: environment variable DPKG_MATINSCRIPT_PACKAGE missing After trying sudo service lightdm start or sudo start lightdm I get to see the boot loading screen again but nothing changes. If I go back to the tty shell I see lightdm start/running, process <num> but ps -e | grep lightdm gives no output. After trying sudo service gdm start or sudo starg gdm I get the gdm start/running, process <num> message, and gdm-binary is supposedly an active process, but all that happens is that the screen blinks a couple of times and nothing else. Other candidate solutions that I'd found on the web included running startx but when I try that I get an error output [...] Fatal server error: no screens found [...]. Moreover, I made sure that lightdm-gtk-greeter is installed but that did not help either. Please excuse my not including complete outputs/logs; I am writing this post from another computer and it's hard to manually copy the complete logs. Also, I've seen several posts that had to do with similar problems, but either there was no fix, or the one suggested did not work for me. In closing: Please help! I very much hope to avoid re-installing Ubuntu from scratch! :) Alex @mosi I did not manage to fix the NVIDIA kernel driver as per your instructions. I should perhaps mention that I'm on a Dell XPS15 laptop with an NVIDIA Optimus graphics card, and that I have bumblebee installed (which installs nvidia drivers during its installation, I believe). Issuing the mentioned commands I get the following: ~$uname -r 3.0.0-12-generic ~$lsmod | grep -i nvidia nvidia 11713772 0 ~$dmesg | grep -i nvidia [ 8.980041] nvidia: module license 'NVIDIA' taints kernel. [ 9.354860] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.354864] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.354868] nvidia 0000:01:00.0: enabling device (0006 -> 0007) [ 9.354873] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.354879] nvidia 0000:01:00.0: setting latency timer to 64 [ 9.355052] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011 Also, running aptitude search nvidia gives me the following: p nvidia-173 - NVIDIA binary Xorg driver, kernel module a p nvidia-173-dev - NVIDIA binary Xorg driver development file p nvidia-173-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-173-updates-dev - NVIDIA binary Xorg driver development file p nvidia-96 - NVIDIA binary Xorg driver, kernel module a p nvidia-96-dev - NVIDIA binary Xorg driver development file p nvidia-96-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-96-updates-dev - NVIDIA binary Xorg driver development file p nvidia-cg-toolkit - Cg Toolkit - GPU Shader Authoring Language p nvidia-common - Find obsolete NVIDIA drivers i nvidia-current - NVIDIA binary Xorg driver, kernel module a p nvidia-current-dev - NVIDIA binary Xorg driver development file c nvidia-current-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-current-updates-dev - NVIDIA binary Xorg driver development file i nvidia-settings - Tool of configuring the NVIDIA graphics dr p nvidia-settings-updates - Tool of configuring the NVIDIA graphics dr v nvidia-va-driver - v nvidia-va-driver - I've tried manually installing (sudo aptitude install <package>) packages nvidia-common and nvidia-settings-updates but to no avail. For example, sudo aptitude install nvidia-settings-updates returns the following log: Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 83 not upgraded. Need to get 0 B of archives. After unpacking 0 B will be used. Writing extended state information... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... The same happens with the Linux headers (i.e. I cannot seem to be able to install linux-headers-3.0.0-12-generic). The output of aptitude search linux-headers is as follows: v linux-headers - v linux-headers - v linux-headers-2.6 - i linux-headers-2.6.38-11 - Header files related to Linux kernel versi i linux-headers-2.6.38-11-generic - Linux kernel headers for version 2.6.38 on i A linux-headers-2.6.38-8 - Header files related to Linux kernel versi i A linux-headers-2.6.38-8-generic - Linux kernel headers for version 2.6.38 on v linux-headers-3 - v linux-headers-3.0 - v linux-headers-3.0 - i A linux-headers-3.0.0-12 - Header files related to Linux kernel versi p linux-headers-3.0.0-12-generic - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-generic- - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-server - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-virtual - Linux kernel headers for version 3.0.0 on p linux-headers-generic - Generic Linux kernel headers p linux-headers-generic-pae - Generic Linux kernel headers v linux-headers-lbm - v linux-headers-lbm - v linux-headers-lbm-2.6 - v linux-headers-lbm-2.6 - p linux-headers-lbm-3.0.0-12-gene - Header files related to linux-backports-mo p linux-headers-lbm-3.0.0-12-gene - Header files related to linux-backports-mo p linux-headers-lbm-3.0.0-12-serv - Header files related to linux-backports-mo p linux-headers-server - Linux kernel headers on Server Equipment. p linux-headers-virtual - Linux kernel headers for virtual machines @heartsmagic I did try purging and reinstalling any nvidia driver packages, but it did not seem to make a difference, My xorg.conf file contains the following: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 280.13 ([email protected]) Wed Jul 27 17:15:58 PDT 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Silverlight Recruiting Application Part 4 - Navigation and Modules

  After our brief intermission (and the craziness of Q1 2010 release week), we're back on track here and today we get to dive into how we are going to navigate through our applications as well as how to set up our modules. That way, as I start adding the functionality- adding Jobs and Applicants, Interview Scheduling, and finally a handy Dashboard- you'll see how everything is communicating back and forth. This is all leading up to an eventual webinar, in which I'll dive into this process and give a honest look at the current story for MVVM vs. Code-Behind applications. (For a look at the future with SL4 and a little thing called MEF, check out what Ross is doing over at his blog!) Preamble... Before getting into really talking about this app, I've done a little bit of work ahead of time to create a ton of files that I'll need. Since the webinar is going to cover the Dashboard, it's not here, but otherwise this is a look at what the project layout looks like (and remember, this is both projects since they share the .Web): So as you can see, from an architecture perspective, the code-behind app is much smaller and more streamlined- aka a better fit for the one man shop that is me. Each module in the MVVM app has the same setup, which is the Module class and corresponding Views and ViewModels. Since the code-behind app doesn't need a go-between project like Infrastructure, each MVVM module is instead replaced by a single Silverlight UserControl which will contain all the logic for each respective bit of functionality. My Very First Module Navigation is going to be key to my application, so I figured the first thing I would setup is my MenuModule. First step here is creating a Silverlight Class Library named MenuModule, creatingthe View and ViewModel folders, and adding the MenuModule.cs class to handle module loading. The most important thing here is that my MenuModule inherits from IModule, which runs an Initialize on each module as it is created that, in my case, adds the views to the correct regions. Here's the MenuModule.cs code: public class MenuModule : IModule { private readonly IRegionManager regionManager; private readonly IUnityContainer container; public MenuModule(IUnityContainer container, IRegionManager regionmanager) { this.container = container; this.regionManager = regionmanager; } public void Initialize() { var addMenuView = container.Resolve<MenuView>(); regionManager.Regions["MenuRegion"].Add(addMenuView); } } Pretty straightforward here... We inject a container and region manager from Prism/Unity, then upon initialization we grab the view (out of our Views folder) and add it to the region it needs to live in. Simple, right? When the MenuView is created, the only thing in the code-behind is a reference to the set the MenuViewModel as the DataContext. I'd like to achieve MVVM nirvana and have zero code-behind by placing the viewmodel in the XAML, but for the reasons listed further below I can't. Navigation - MVVM Since navigation isn't the biggest concern in putting this whole thing together, I'm using the Button control to handle different options for loading up views/modules. There is another reason for this- out of the box, Prism has command support for buttons, which is one less custom command I had to work up for the functionality I would need. This comes from the Microsoft.Practices.Composite.Presentation assembly and looks as follows when put in code: <Button x:Name="xGoToJobs" Style="{StaticResource menuStyle}" Content="Jobs" cal:Click.Command="{Binding GoModule}" cal:Click.CommandParameter="JobPostingsView" /> For quick reference, 'menuStyle' is just taking care of margins and spacing, otherwise it looks, feels, and functions like everyone's favorite Button. What MVVM's this up is that the Click.Command is tying to a DelegateCommand (also coming fromPrism) on the backend. This setup allows you to tie user interaction to a command you setup in your viewmodel, which replaces the standard event-based setup you'd see in the code-behind app. Due to databinding magic, it all just works. When we get looking at the DelegateCommand in code, it ends up like this: public class MenuViewModel : ViewModelBase { private readonly IRegionManager regionManager; public DelegateCommand<object> GoModule { get; set; } public MenuViewModel(IRegionManager regionmanager) { this.regionManager = regionmanager; this.GoModule = new DelegateCommand<object>(this.goToView); } public void goToView(object obj) { MakeMeActive(this.regionManager, "MainRegion", obj.ToString()); } } Another for reference, ViewModelBase takes care of iNotifyPropertyChanged and MakeMeActive, which switches views in the MainRegion based on the parameters. So our public DelegateCommand GoModule ties to our command on the view, that in turn calls goToView, and the parameter on the button is the name of the view (which we pass with obj.ToString()) to activate. And how do the views get the names I can pass as a string? When I called regionManager.Regions[regionname].Add(view), there is an overload that allows for .Add(view, "viewname"), with viewname being what I use to activate views. You'll see that in action next installment, just wanted to clarify how that works. With this setup, I create two more buttons in my MenuView and the MenuModule is good to go. Last step is to make sure my MenuModule loads in my Bootstrapper: protected override IModuleCatalog GetModuleCatalog() { ModuleCatalog catalog = new ModuleCatalog(); // add modules here catalog.AddModule(typeof(MenuModule.MenuModule)); return catalog; } Clean, simple, MVVM-delicious. Navigation - Code-Behind Keeping with the history of significantly shorter code-behind sections of this series, Navigation will be no different. I promise. As I explained in a prior post, due to the one-project setup I don't have to worry about the same concerns so my menu is part of MainPage.xaml. So I can cheese-it a bit, though, since I've already got three buttons all set I'm just copying that code and adding three click-events instead of the command/commandparameter setup: <!-- Menu Region --> <StackPanel Grid.Row="1" Orientation="Vertical"> <Button x:Name="xJobsButton" Content="Jobs" Style="{StaticResource menuStyleCB}" Click="xJobsButton_Click" /> <Button x:Name="xApplicantsButton" Content="Applicants" Style="{StaticResource menuStyleCB}" Click="xApplicantsButton_Click" /> <Button x:Name="xSchedulingModule" Content="Scheduling" Style="{StaticResource menuStyleCB}" Click="xSchedulingModule_Click" /> </StackPanel> Simple, easy to use events, and no extra assemblies required! Since the code for loading each view will be similar, we'll focus on JobsView for now.The code-behind with this setup looks something like... private JobsView _jobsView; public MainPage() { InitializeComponent(); } private void xJobsButton_Click(object sender, RoutedEventArgs e) { if (MainRegion.Content.GetType() != typeof(JobsView)) { if (_jobsView == null) _jobsView = new JobsView(); MainRegion.Content = _jobsView; } } What am I doing here? First, for each 'view' I create a private reference which MainPage will hold on to. This allows for a little bit of state-maintenance when switching views. When a button is clicked, first we make sure the 'view' typeisn't active (why load it again if it is already at center stage?), then we check if the view has been created and create if necessary, then load it up. Three steps to switching views and is easy as pie. Part 4 Results The end result of all this is that I now have a menu module (MVVM) and a menu section (code-behind) that load their respective views. Since I'm using the same exact XAML (except with commands/events depending on the project), the end result for both is again exactly the same and I'll show a slightly larger image to show it off: Next time, we add the Jobs Module and wire up RadGridView and a separate edit page to handle adding and editing new jobs. That's when things get fun. And somewhere down the line, I'll make the menu look slicker. :) Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• How to set Grub to automatically load Xen kernel

  - by Cerin

  How do you configure Grub to automatically use the Xen kernel under Ubuntu 11.10? No matter what I do, it loads the first menuentry. The only way I can get it to load Xen is to manually select the kernel, which I can't do if I have to reboot the server remotely, or there's a power failure and the machine automatically boots up when power's restored, etc. It's driving me nuts. In my /boot/grub/grub.cfg, the Xen kernel is at index 4 (i.e. it's the 5th menuentry). So I've tried: Setting GRUB_DEFAULT=4, and running sudo update-grub Setting GRUB_DEFAULT=saved and GRUB_SAVEDEFAULT=true, and running sudo update-grub Setting GRUB_DEFAULT="Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-16-server", and running sudo update-grub None of these work. It continues to load the first menuentry, which is "Ubuntu, with Linux 3.0.0-16-server". Below is my current /boot/grub/grub.cfg. What am I doing wrong? # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-16-server" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=2 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.0.0-16-server' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod gzio insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac linux /boot/vmlinuz-3.0.0-16-server root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro initrd /boot/initrd.img-3.0.0-16-server } menuentry 'Ubuntu, with Linux 3.0.0-16-server (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Linux 3.0.0-16-server ...' linux /boot/vmlinuz-3.0.0-16-server root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-16-server } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 3.0.0-12-server' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod gzio insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac linux /boot/vmlinuz-3.0.0-12-server root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro initrd /boot/initrd.img-3.0.0-12-server } menuentry 'Ubuntu, with Linux 3.0.0-12-server (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Linux 3.0.0-12-server ...' linux /boot/vmlinuz-3.0.0-12-server root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-12-server } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### submenu "Xen 4.1-amd64" { menuentry 'Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-16-server' --class ubuntu --class gnu-linux --class gnu --class os --class xen { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Xen 4.1-amd64 ...' multiboot /boot/xen-4.1-amd64.gz placeholder echo 'Loading Linux 3.0.0-16-server ...' module /boot/vmlinuz-3.0.0-16-server placeholder root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro echo 'Loading initial ramdisk ...' module /boot/initrd.img-3.0.0-16-server } menuentry 'Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-16-server (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os --class xen { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Xen 4.1-amd64 ...' multiboot /boot/xen-4.1-amd64.gz placeholder echo 'Loading Linux 3.0.0-16-server ...' module /boot/vmlinuz-3.0.0-16-server placeholder root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro single echo 'Loading initial ramdisk ...' module /boot/initrd.img-3.0.0-16-server } menuentry 'Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-12-server' --class ubuntu --class gnu-linux --class gnu --class os --class xen { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Xen 4.1-amd64 ...' multiboot /boot/xen-4.1-amd64.gz placeholder echo 'Loading Linux 3.0.0-12-server ...' module /boot/vmlinuz-3.0.0-12-server placeholder root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro echo 'Loading initial ramdisk ...' module /boot/initrd.img-3.0.0-12-server } menuentry 'Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-12-server (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os --class xen { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Xen 4.1-amd64 ...' multiboot /boot/xen-4.1-amd64.gz placeholder echo 'Loading Linux 3.0.0-12-server ...' module /boot/vmlinuz-3.0.0-12-server placeholder root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro single echo 'Loading initial ramdisk ...' module /boot/initrd.img-3.0.0-12-server } } ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ###

  Read the article

• Async CTP (C# 5): How to make WCF work with Async CTP

  - by javarg

  If you have recently downloaded the new Async CTP you will notice that WCF uses Async Pattern and Event based Async Pattern in order to expose asynchronous operations. In order to make your service compatible with the new Async/Await Pattern try using an extension method similar to the following: WCF Async/Await Method public static class ServiceExtensions {     public static Task<DateTime> GetDateTimeTaskAsync(this Service1Client client)     {         return Task.Factory.FromAsync<DateTime>(             client.BeginGetDateTime(null, null),             ar => client.EndGetDateTime(ar));     } } The previous code snippet adds an extension method to the GetDateTime method of the Service1Client WCF proxy. Then used it like this (remember to add the extension method’s namespace into scope in order to use it): Code Snippet var client = new Service1Client(); var dt = await client.GetDateTimeTaskAsync(); Replace the proxy’s type and operation name for the one you want to await.

  Read the article

• SecurityException when accessing (ejb2-) session bean via local interface in JBoss 5

  - by sme

  I have the following problem with an EJB 2 SessionBean when deploying in JBoss 5: The SessionBean (called LVSKeepAliveDispatcher) requires a specific user role (called "LVSUser"), specified by <method-permission > <description></description> <role-name>LVSUser</role-name> <method > <description></description> <ejb-name>LVSKeepAliveDispatcher</ejb-name> <method-name>*</method-name> </method> </method-permission> in ejb-jar.xml. I now want to access this SessionBean from a Service (i.e. a class implementing the org.jboss.varia.scheduler.Schedulable interface that is then registered as a service) running inside the same JBoss instance. This is my jboss-service.xml: <server> <mbean code="org.jboss.varia.scheduler.Scheduler" name="lvs:service=TranslationService"> <attribute name="StartAtStartup">true</attribute> <attribute name="SchedulableClass">de.repower.lvs.server.service.translation.TranslationService</attribute> <attribute name="SchedulableArguments"></attribute> <attribute name="SchedulableArgumentTypes"></attribute> <attribute name="InitialStartDate">NOW</attribute> <attribute name="SchedulePeriod">60000</attribute> <attribute name="InitialRepetitions">1</attribute> <attribute name="TimerName">jboss:service=Timer,name=TranslationServiceTimer</attribute> <depends><mbean code="javax.management.timer.Timer" name="jboss:service=Timer,name=TranslationServiceTimer"/></depends> <depends>jboss.j2ee:service=EJB,jndiName=de/repower/lvs/i18n/sessionbeans/LVSTranslation</depends> </mbean> As the service is deployed in the same vm as the session bean I want to call the session bean via the local interface, but I get a SecurityException when I try to create an instance. When instead I do a lookup of the RemoteInterface it works. This is the code inside the perform method of my service class: public void perform(Date now, long remainingRepetitions) { try { final UsernamePasswordHandler handler = new UsernamePasswordHandler(USERNAME, PASSWORD); final LoginContext lc = new LoginContext("client-login", handler); lc.login(); // Trying to instantiate an LVSKeepAliveDispatcher via remote interface // This part works LVSKeepAliveDispatcher localvHome = LVSKeepAliveDispatcherUtil.getHome().create(); LOGGER.info("Successfully instantiated an LVSKeepAliveDispatcher " + localvHome.toString()); // Trying to instantiate an LVSKeepAliveDispatcherLocal via local interface LVSKeepAliveDispatcherLocal localvLocalHome = LVSKeepAliveDispatcherUtil.getLocalHome().create(); // this code is unforunately never reached LOGGER.info("Successfully instantiated an LVSKeepAliveDispatcherLocal " + localvLocalHome.toString()); lc.logout(); } catch (final Exception ex) { LOGGER.error("Error: ", ex); } } Exception: 2009-02-17 10:38:02,266 INFO [lvsi18n] (Timer-2) Successfully instantiated an LVSKeepAliveDispatcher de/repower/lvs/server/service/alive/sessionbeans/LVSKeepAliveDispatcher:Stateless 2009-02-17 10:38:02,297 ERROR [org.jboss.ejb.plugins.SecurityInterceptor] (Timer-2) Error in Security Interceptor java.lang.SecurityException: Authentication exception, principal=internalSystemUser at org.jboss.ejb.plugins.SecurityInterceptor.checkSecurityContext(SecurityInterceptor.java:321) at org.jboss.ejb.plugins.SecurityInterceptor.process(SecurityInterceptor.java:243) at org.jboss.ejb.plugins.SecurityInterceptor.invokeHome(SecurityInterceptor.java:205) at org.jboss.ejb.plugins.security.PreSecurityInterceptor.process(PreSecurityInterceptor.java:136) at org.jboss.ejb.plugins.security.PreSecurityInterceptor.invokeHome(PreSecurityInterceptor.java:88) at org.jboss.ejb.plugins.LogInterceptor.invokeHome(LogInterceptor.java:132) at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invokeHome(ProxyFactoryFinderInterceptor.java:107) at org.jboss.ejb.SessionContainer.internalInvokeHome(SessionContainer.java:639) at org.jboss.ejb.Container.invoke(Container.java:1046) at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invokeHome(BaseLocalProxyFactory.java:362) at org.jboss.ejb.plugins.local.LocalHomeProxy.invoke(LocalHomeProxy.java:133) at $Proxy193.create(Unknown Source) at de.repower.lvs.server.service.translation.TranslationService.perform(TranslationService.java:68) at org.jboss.varia.scheduler.Scheduler$PojoScheduler.invoke(Scheduler.java:1267) at org.jboss.varia.scheduler.Scheduler$BaseListener.handleNotification(Scheduler.java:1235) at sun.reflect.GeneratedMethodAccessor281.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.jboss.mx.notification.NotificationListenerProxy.invoke(NotificationListenerProxy.java:153) at $Proxy87.handleNotification(Unknown Source) at javax.management.NotificationBroadcasterSupport.handleNotification(NotificationBroadcasterSupport.java:257) at javax.management.NotificationBroadcasterSupport$SendNotifJob.run(NotificationBroadcasterSupport.java:322) at javax.management.NotificationBroadcasterSupport$1.execute(NotificationBroadcasterSupport.java:307) at javax.management.NotificationBroadcasterSupport.sendNotification(NotificationBroadcasterSupport.java:229) at javax.management.timer.Timer.sendNotification(Timer.java:1234) at javax.management.timer.Timer.notifyAlarmClock(Timer.java:1203) at javax.management.timer.TimerAlarmClock.run(Timer.java:1286) at java.util.TimerThread.mainLoop(Timer.java:512) at java.util.TimerThread.run(Timer.java:462) To further diagnose the error I debugged through the SecurityInterceptor and found that in the first case (successful creating an instance via the remote interface) the security context "lvs-security" (which I defined in login-config.xml) is being used whereas in the second case (failure when creating an instance via the local interface) the generic security context "CLIENT-LOGIN" is being used. This is the definition of the securit context "lvs-security" in login-config.xml: <application-policy name = "lvs-security"> <authentication> <login-module code = "org.jboss.security.ClientLoginModule" flag = "required"> </login-module> <login-module code = "de.repower.lvs.security.UsersRolesLoginModule" flag = "sufficient"> </login-module> <login-module code = "de.repower.lvs.security.login.LVSLoginModule" flag = "required"> <module-option name = "lvs-jboss-host">localhost</module-option> <module-option name = "lvs-jboss-jndi-port">1099</module-option> </login-module> </authentication> </application-policy> I'm now kind of stuck and hope someone can give me a hint about where to further look for the cause of the problem. This worked fine in JBoss 3.2.7. Edit: My current workaround for this problem: create a new container configuration in jboss.xml and remove the security interceptor stuff from this configuration use this newly created container configuration for all my session beans that I only use locally (i.e. via local interface).

  Read the article

• How to configure fastcgi to work with ligttpd in ubuntu

  - by michael

  I am able to run lighttpd on ubuntu 9.10. But when i tried to setup fastcgi with lighttpd by putting this in the ligttpd.conf file: #### fastcgi module fastcgi.server = ( "/fastcgi_scripts/" => (( "host" => "127.0.0.1", "port" => "9098", "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", "docroot" => "/" # remote server may use # it's own docroot )) ) This is what I get in the error.log in ligttpd: 2010-03-07 21:00:11: (log.c.166) server started 2010-03-07 21:00:11: (mod_fastcgi.c.1104) the fastcgi-backend /usr/local/bin/cgi-fcgi failed to start: 2010-03-07 21:00:11: (mod_fastcgi.c.1108) child exited with status 1 /usr/local/bin/cgi-fcgi 2010-03-07 21:00:11: (mod_fastcgi.c.1111) If you're trying to run your app as a FastCGI backend, make sure you're using the FastCGI-enabled version. If this is PHP on Gentoo, add 'fastcgi' to the USE flags. 2010-03-07 21:00:11: (mod_fastcgi.c.1399) [ERROR]: spawning fcgi failed. 2010-03-07 21:00:11: (server.c.931) Configuration of plugins failed. Going down. I do have cgi-fcgi in /usr/local/bin: $ which cgi-fcgi /usr/local/bin/cgi-fcgi '/usr/local/bin/cgi-fcgi' is the executable after I download and compile fast-cgi. Here is my lighttpd conf file: $ more lighttpd.conf # lighttpd configuration file # # use it as a base for lighttpd 1.0.0 and above # # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $ ############ Options you really have to take care of #################### ## modules to load # at least mod_access and mod_accesslog should be loaded # all other module should only be loaded if really neccesary # - saves some time # - saves memory server.modules = ( # "mod_rewrite", # "mod_redirect", # "mod_alias", "mod_access", # "mod_trigger_b4_dl", # "mod_auth", # "mod_status", # "mod_setenv", "mod_fastcgi", # "mod_proxy", # "mod_simple_vhost", # "mod_evhost", # "mod_userdir", # "mod_cgi", # "mod_compress", # "mod_ssi", # "mod_usertrack", # "mod_expire", # "mod_secdownload", # "mod_rrdtool", "mod_accesslog" ) ## A static document-root. For virtual hosting take a look at the ## mod_simple_vhost module. server.document-root = "/srv/www/htdocs/" ## where to send error-messages to server.errorlog = "/var/log/lighttpd/error.log" # files to check for if .../ is requested index-file.names = ( "index.php", "index.html", "index.htm", "default.htm" ) ## set the event-handler (read the performance section in the manual) # server.event-handler = "freebsd-kqueue" # needed on OS X # mimetype mapping mimetype.assign = ( ".pdf" => "application/pdf", ".sig" => "application/pgp-signature", ".spl" => "application/futuresplash", ".class" => "application/octet-stream", ".ps" => "application/postscript", ".torrent" => "application/x-bittorrent", ".dvi" => "application/x-dvi", ".gz" => "application/x-gzip", ".pac" => "application/x-ns-proxy-autoconfig", ".swf" => "application/x-shockwave-flash", ".tar.gz" => "application/x-tgz", ".tgz" => "application/x-tgz", ".tar" => "application/x-tar", ".zip" => "application/zip", ".mp3" => "audio/mpeg", ".m3u" => "audio/x-mpegurl", ".wma" => "audio/x-ms-wma", ".wax" => "audio/x-ms-wax", ".ogg" => "application/ogg", ".wav" => "audio/x-wav", ".gif" => "image/gif", ".jar" => "application/x-java-archive", ".jpg" => "image/jpeg", ".jpeg" => "image/jpeg", ".png" => "image/png", ".xbm" => "image/x-xbitmap", ".xpm" => "image/x-xpixmap", ".xwd" => "image/x-xwindowdump", ".css" => "text/css", ".html" => "text/html", ".htm" => "text/html", ".js" => "text/javascript", ".asc" => "text/plain", ".c" => "text/plain", ".cpp" => "text/plain", ".log" => "text/plain", ".conf" => "text/plain", ".text" => "text/plain", ".txt" => "text/plain", ".dtd" => "text/xml", ".xml" => "text/xml", ".mpeg" => "video/mpeg", ".mpg" => "video/mpeg", ".mov" => "video/quicktime", ".qt" => "video/quicktime", ".avi" => "video/x-msvideo", ".asf" => "video/x-ms-asf", ".asx" => "video/x-ms-asf", ".wmv" => "video/x-ms-wmv", ".bz2" => "application/x-bzip", ".tbz" => "application/x-bzip-compressed-tar", ".tar.bz2" => "application/x-bzip-compressed-tar", # default mime type "" => "application/octet-stream", ) # Use the "Content-Type" extended attribute to obtain mime type if possible #mimetype.use-xattr = "enable" ## send a different Server: header ## be nice and keep it at lighttpd # server.tag = "lighttpd" #### accesslog module accesslog.filename = "/var/log/lighttpd/access.log" ## deny access the file-extensions # # ~ is for backupfiles from vi, emacs, joe, ... # .inc is often used for code includes which should in general not be part # of the document-root url.access-deny = ( "~", ".inc" ) $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) ######### Options that are good to be but not neccesary to be changed ####### ## bind to port (default: 80) server.port = 9090 ## bind to localhost (default: all interfaces) server.bind = "127.0.0.1" ## error-handler for status 404 #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## to help the rc.scripts #server.pid-file = "/var/run/lighttpd.pid" ###### virtual hosts ## ## If you want name-based virtual hosting add the next three settings and load ## mod_simple_vhost ## ## document-root = ## virtual-server-root + virtual-server-default-host + virtual-server-docroot ## or ## virtual-server-root + http-host + virtual-server-docroot ## #simple-vhost.server-root = "/srv/www/vhosts/" #simple-vhost.default-host = "www.example.org" #simple-vhost.document-root = "/htdocs/" ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' #server.errorfile-prefix = "/usr/share/lighttpd/errors/status-" #server.errorfile-prefix = "/srv/www/errors/status-" ## virtual directory listings #dir-listing.activate = "enable" ## select encoding for directory listings #dir-listing.encoding = "utf-8" ## enable debugging #debug.log-request-header = "enable" #debug.log-response-header = "enable" #debug.log-request-handling = "enable" #debug.log-file-not-found = "enable" ### only root can use these options # # chroot() to directory (default: no chroot() ) #server.chroot = "/" ## change uid to <uid> (default: don't care) #server.username = "wwwrun" ## change uid to <uid> (default: don't care) #server.groupname = "wwwrun" #### compress module #compress.cache-dir = "/var/cache/lighttpd/compress/" #compress.filetype = ("text/plain", "text/html") #### proxy module ## read proxy.txt for more info #proxy.server = ( ".php" => # ( "localhost" => # ( # "host" => "192.168.0.101", # "port" => 80 # ) # ) # ) #### fastcgi module fastcgi.server = ( "/fastcgi_scripts/" => (( "host" => "127.0.0.1", "port" => 1026, "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", #"docroot" => "/" # remote server may use # it's own docroot )) ) ## read fastcgi.txt for more info ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini #fastcgi.server = ( ".php" => # ( "localhost" => # ( # "socket" => "/var/run/lighttpd/php-fastcgi.s ocket", # "bin-path" => "/usr/local/bin/php-cgi" # ) # ) # ) #### CGI module #cgi.assign = ( ".pl" => "/usr/bin/perl", # ".cgi" => "/usr/bin/perl" ) # #### SSL engine #ssl.engine = "enable" #ssl.pemfile = "/etc/ssl/private/lighttpd.pem" #### status module #status.status-url = "/server-status" #status.config-url = "/server-config" #### auth module ## read authentication.txt for more info #auth.backend = "plain" #auth.backend.plain.userfile = "lighttpd.user" #auth.backend.plain.groupfile = "lighttpd.group" #auth.backend.ldap.hostname = "localhost" #auth.backend.ldap.base-dn = "dc=my-domain,dc=com" #auth.backend.ldap.filter = "(uid=$)" #auth.require = ( "/server-status" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "user=jan" # ), # "/server-config" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "valid-user" # ) # ) #### url handling modules (rewrite, redirect, access) #url.rewrite = ( "^/$" => "/server-status" ) #url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" ) #### both rewrite/redirect support back reference to regex conditional using %n #$HTTP["host"] =~ "^www\.(.*)" { # url.redirect = ( "^/(.*)" => "http://%1/$1" ) #} # # define a pattern for the host url finding # %% => % sign # %0 => domain name + tld # %1 => tld # %2 => domain name without tld # %3 => subdomain 1 name # %4 => subdomain 2 name # #evhost.path-pattern = "/srv/www/vhosts/%3/htdocs/" #### expire module #expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "ac cess plus 1 seconds 2 minutes") #### ssi #ssi.extension = ( ".shtml" ) #### rrdtool #rrdtool.binary = "/usr/bin/rrdtool" #rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd" #### setenv #setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" ) #setenv.add-response-header = ( "X-Secret-Message" => "42" ) ## for mod_trigger_b4_dl # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db" # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" ) # trigger-before-download.trigger-url = "^/trigger/" # trigger-before-download.download-url = "^/download/" # trigger-before-download.deny-url = "http://127.0.0.1/index.html" # trigger-before-download.trigger-timeout = 10 #### variable usage: ## variable name without "." is auto prefixed by "var." and becomes "var.bar" #bar = 1 #var.mystring = "foo" ## integer add #bar += 1 ## string concat, with integer cast as string, result: "www.foo1.com" #server.name = "www." + mystring + var.bar + ".com" ## array merge #index-file.names = (foo + ".php") + index-file.names #index-file.names += (foo + ".php") #### include #include /etc/lighttpd/lighttpd-inc.conf ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf" #include "lighttpd-inc.conf" #### include_shell #include_shell "echo var.a=1" ## the above is same as: #var.a=1 Thank you for your help.

  Read the article

• Different callbacks for error or error as first argument?

  - by Florian Margaine

  We (and the JS SO chat room) had a talk with @rlemon some days ago about his Little-XHR library about error handling. Basically, we wanted to decide which error handling pattern should be used: xhr.get({ // Some parameters, and then success: function(data) {}, failure: function(data) {} }) Or: xhr.get({ // Some parameters, and then callback: function(err, data) {} }) One is more jQuery-like, while the other is more Node-like. Some say that the first pattern makes you think more about handling error. I think the opposite, since you may forget the other callback function, while the argument is always there on the second pattern. Any opinion/advantage/drawback about both these patterns?

  Read the article

• Sound Waves Visualized with a Chladni Plate and Colored Sand [Video]

  - by Jason Fitzpatrick

  This eye catching demonstration combines a Chladni Plate, four piles of colored sand, and a rubber mallet to great effect–watch as the plate vibrates pattern after pattern into the sand. A Chladni Plate, named after physicist Ernst Chladni, is a steel plate that vibrates when rubbed with a rubber ball-style mallet. Different size balls create different frequencies and each frequency creates a different pattern in the sand placed atop the plate. Watch the video above to see how rubber balls, large and small, change the patterns. [via Neatorama] Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

  Read the article

• What are the differences among sqlite3 from python2.5, pysqlite and apsw

  - by leo

  Hi, I would like to know the differences among sqlite3 from python2.5, pysqlite and apsw? I have a bumpy run when trying to install pysqlite on windows vista with python2.5, see following: download sqlite from http://sqlite.org/download.html and unzip them into windows/system32 folder and put sqlite3.dll into c:/python25/Lib folder download pysqlite windows installer when trying to run following in python shell: >>> from pysqlite2 import test Traceback (most recent call last): File "<stdin>", line 1, in <module> File "pysqlite2\test\__init__.py", line 35, in <module> from pysqlite2.test import dbapi, types, userfunctions, factory, transactions,\ File "pysqlite2\test\dbapi.py", line 27, in <module> import pysqlite2.dbapi2 as sqlite File "pysqlite2\dbapi2.py", line 27, in <module> from pysqlite2._sqlite import * ImportError: No module named _sqlite I am wondering anybody with experiences of the above three types of sqlite binding to python can comment their pros and cons such as performances I am wondering is it worthwhile to try the pysqlite or apsw thanks

  Read the article

• Dynamically switching the theme in Orchard

  - by Bertrand Le Roy

  It may sound a little puzzling at first, but in Orchard CMS, more than one theme can be active at any given time. The reason for that is that we have an extensibility point that allows a module (or a theme) to participate in the choice of the theme to use, for each request. The motivation for building the theme engine this way was to enable developers to switch themes based on arbitrary criteria, such as user preferences or the user agent (if you want to serve a mobile theme for phones for example). The choice is made between the active themes, which is why there is a difference between the default theme and the active themes. In order to have a say in the choice of the theme, all you have to do is implement IThemeSelector. That interface is quite simple as it only has one method, GetTheme, that takes the current RequestContext and returns a ThemeSelectorResult or null if the implementation of the interface does not want to participate in the current request (we'll see an example in a moment). ThemeSelectorResult itself is just a ThemeName string property and an integer Priority. We're using a priority so that an arbitrary number of implementations of IThemeSelector can contribute to the choice of a theme. If you look for existing implementations of the interface in Orchard, you'll find four: AdminThemeSelector: selects the TheAdmin theme with a very high priority (100) if the current request is for a page that is part of the admin. Otherwise, null is returned, which enables other implementations to choose the theme. PreviewThemeSelector: selects the preview theme if there is one, with a high priority (90), and null otherwise. This enables administrators to view the site under a different theme while everybody else continues to see the current default theme. SiteThemeSelector: this is the implementation that is doing what you expect most of the time, which is to get the current theme from site settings and set it with a priority of –5. SafeModeThemeSelector: this is the fallback implementation, which should almost never win. It sets the theme as the safe mode theme, which has no style and just uses the default templates for everything. The priority is very low (-100). While this extensibility mechanism is great to have, I wanted to bring that level of choice into the hands of the site administrator rather than just developers. In order to achieve that, I built the Vandelay Theme Picker module. The module provides administration UI to create rules for theme selection. It provides its own extensibility point (the IThemeSelectionRule interface) and one implementation of a rule: UserAgentThemeSelectorRule. This rule gets the current user agent from the context and tries to match it with a regular expression that the administrator can configure in the admin UI. You can for example configure a rule with a regular expression that matches IE6 and serve a different subtheme where the stylesheet has been tweaked for such an antique browser. Another possible configuration is to detect mobile devices from their agent string and serve the mobile theme. All those operations can be done with this module entirely from the admin UI, without writing a line of code. The module also offers the administrator the opportunity to inject a link into the front-end in a specific zone and with a specific position that enables the user to switch to the default theme if he wishes to. This is especially useful for sites that use a mobile theme but still want to allow users to use the full desktop site. While the module is nice and flexible, it may be overkill. On my own personal blog, I have only two active themes: the desktop theme and the mobile theme. I'm fine with going into code to change the criteria on which to switch the theme, so I'm not using my own Theme Picker module. Instead, I made the mobile theme a theme with code (in other words there is a csproj file in the theme). The project includes a single C# file, my MobileThemeSelector for which the code is the following: public class MobileThemeSelector : IThemeSelector { private static readonly Regex _Msie678 = new Regex(@"^Mozilla\/4\.0 \(compatible; MSIE [678]" + @"\.0; Windows NT \d\.\d(.*)\)$", RegexOptions.IgnoreCase); private ThemeSelectorResult _requestCache; private bool _requestCached; public ThemeSelectorResult GetTheme(RequestContext context) { if (_requestCached) return _requestCache; _requestCached = true; var userAgent = context.HttpContext.Request.UserAgent; if (userAgent.IndexOf("phone", StringComparison.OrdinalIgnoreCase) != -1 || _Msie678.IsMatch(userAgent) || userAgent.IndexOf("windows live writer", StringComparison.OrdinalIgnoreCase) != -1) { _requestCache = new ThemeSelectorResult { Priority = 10, ThemeName = "VuLuMobile" }; } return _requestCache; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The theme selector selects the current theme for Internet Explorer versions 6 to 8, for phones, and for Windows Live Writer (so that the theme that is used when I write posts is as simple as possible). What's interesting here is that it's the theme that selects itself here, based on its own criteria. This should give you a good panorama of what's possible in terms of dynamic theme selection in Orchard. I hope you find some fun uses for it. As usual, I can't wait to see what you're going to come up with…

  Read the article

• Selective PHP autoload

  - by Extrakun

  I am writing a add-on module which is integrated with an existing PHP application; Because I am using a MVC pattern, and which may requires lot of inclusion of classes (which might not be used at all depending on the action of the user), I decide to use autoloading of classes. However, I have to ensure that the autoload function does not interferes with the normal operations of the existing applications. Does autoload only kicks in if a class name is not defined? Say I have to write another module which uses its own autoload functions (say, I have an autoload for a module, since they each reside in their own folder), how do I differentiate which module is it for? For #2, I thought of 2 options. Either prefix the class name with the module name (Such as 'MyNewModule_View_Default' and 'AnotherModule_View_Default'), or use file_exists to check the include file exists. Other suggestions are welcomed too!

  Read the article

• WCSF vs MEF, What's Best For Me?

  - by Galilyou

  Hey fellows, I'm working on a large web application that includes many modules (CRM, Inventory, Administration, etc.) What I want to accomplish is to be able develop each of these modules independently (the UI, Core Logic, DataAccess Logic, and all) and then integrate them all together into a core module (this integration should only be a change in the configuration file). For example, if I have a core module named Host, I should be able to add the CRM module to the host module by simply adding this line to the host's configuration file: <module name="CRM" /> I did some reading on the WCSF, and found that it can help integrate some modules together, but it really doesn't offer so much help in terms of integrating those UI elements. Some friends suggested MEF for the job, but I haven't looked at that yet. What do you guys think? Is it possible to achieve this level of modularity, and how much work do I have to put into it to get it working?

  Read the article

• How do I exclude the sources jar in mvn deploy?

  - by Richard

  When I run "mvn deploy:deploy", maven deploys 4 jar files to my internal remote repository. They are: [module-name]-1.jar [module-name]-1.pom [module-name]-1-sources.jar [module-name]-1-tests.jar There are actually more files, such as md5 and sha1 files, being deployed. But for simplicity, I just skip these files here. Is there any way to exclude [module-name]-1-sources.jar from the deployment process? One way I can think of is to use "mvn deploy:deploy-file", which allows me to pinpoint which jar to deploy. But since I have a few dozen modules to deploy, it'll be nice if I can configure the deployment file exclusion in pom.xml. Otherwise, I'll have to write a script to deploy. Thanks, Richard

  Read the article

• Issues with dynamically loading modules in code with Silverlight/Prism

  - by Greg Bailey

  In my Bootstrapper.cs in GetModuleCatalog, I need to specify the Module types using the typeof(ModuleType). In the example below I'm trying to load the Contact module on demand, but in order to get it into my module catalog, I need to have a reference to it in the project that holds my Bootstrapper. When I add a reference to Contact, then the Contact.dll gets added to the initial xap file, which defeats the purpose of loading the module dynamically. Am I missing something? Do you have to load the module catalog from a file to make this work? var catalog = new ModuleCatalog(); catalog.AddModule(typeof(Core)); catalog.AddModule(typeof(Contact), InitializationMode.OnDemand);

  Read the article

• Issue reading packets from a pcap file. dpkt module. What gives?

  - by Chris

  I am running the following test script to try to read packets from a sample .pcap file I have downloaded. It won't seem to run. I have all of the modules, but no examples seem to be running. import socket import dpkt import sys pcapReader = dpkt.pcap.Reader(file("test1.pcap", "rb")) for ts, data in pcapReader: ether = dpkt.ethernet.Ethernet(data) if ether.type != dpkt.ethernet.ETH_TYPE_IP: raise ip = ether.data src = socket.inet_ntoa(ip.src) dst = socket.inet_ntoa(ip.dst) print "%s -> %s" % (src, dst) For some reason, this is not being interpreted properly. When running it, I get KeyError: 138 module body in test.py at line 4 function __init__ in pcap.py at line 105 Program exited. Why is this? What's wrong?

  Read the article

• Blank screen after installing nvidia restricted driver

  - by LaMinifalda

  I have a new machine with a MSI N560GTX Ti Twin Frozr II/OC graphic card and MSI PH67A-C43 (B3) main board. If i install the current nvidia restricted driver and reboot the machine on Natty (64-bit), then i only get a black screen after reboot and my system does not respond. I can´t see the login screen. On nvidia web page i saw that the current driver is 270.41.06. Is that driver used as current driver? Btw, i am an ubuntu/linux beginner and therefore not very familiar with ubuntu. What can i do to solve the black screen problem? EDIT: Setting the nomodeset parameter does not solve the problem. After ubuntu start, first i see the ubuntu logo, then strange pixels and at the end the black screen. HELP! EDIT2: Thank you, but setting the "video=vesa:off gfxpayload=text" parameters do no solve the problem too. Same result as in last edit. HELP. I would like to see Unity. This is my grub: GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="video=vesa:off gfxpayload=text nomodeset quiet splash" GRUB_CMDLINE_LINUX=" vga=794" EDIT3: I dont know if it is important. If this edit is unnecessary and helpless I will delete it. There are some log files (Xorg.0.log - Xorg.4.log). I dont know how these log files relate to each other. Please, check the errors listed below. In Xorg.1.log I see the following error: [ 20.603] (EE) Failed to initialize GLX extension (ComIatible NVIDIA X driver not found) In Xorg.2.log I see the following error: [ 25.971] (II) Loading /usr/lib/xorg/modules/libfb.so [ 25.971] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 25.971] (==) NVIDIA(0): RGB weight 888 [ 25.971] (==) NVIDIA(0): Default visual is TrueColor [ 25.971] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 26.077] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please [ 26.078] (EE) NVIDIA(0): check your system's kernel log for additional error [ 26.078] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the [ 26.078] (EE) NVIDIA(0): README for additional information. [ 26.078] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device! [ 26.078] (II) UnloadModule: "nvidia" [ 26.078] (II) Unloading nvidia [ 26.078] (II) UnloadModule: "wfb" [ 26.078] (II) Unloading wfb [ 26.078] (II) UnloadModule: "fb" [ 26.078] (II) Unloading fb [ 26.078] (EE) Screen(s) found, but none have a usable configuration. [ 26.078] Fatal server error: [ 26.078] no screens found [ 26.078] Please consult the The X.Org Found [...] In Xorg.4.log I see the following errors: [ 15.437] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 15.437] (==) NVIDIA(0): RGB weight 888 [ 15.437] (==) NVIDIA(0): Default visual is TrueColor [ 15.437] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 15.703] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0) [ 15.703] (--) NVIDIA(0): Memory: 1048576 kBytes [ 15.703] (--) NVIDIA(0): VideoBIOS: 70.24.11.00.00 [ 15.703] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 15.703] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 15.703] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 560 Ti at [ 15.703] (--) NVIDIA(0): PCI:1:0:0 [ 15.703] (--) NVIDIA(0): none [ 15.706] (EE) NVIDIA(0): No display devices found for this X screen. [ 15.943] (II) UnloadModule: "nvidia" [ 15.943] (II) Unloading nvidia [ 15.943] (II) UnloadModule: "wfb" [ 15.943] (II) Unloading wfb [ 15.943] (II) UnloadModule: "fb" [ 15.943] (II) Unloading fb [ 15.943] (EE) Screen(s) found, but none have a usable configuration. [ 15.943] Fatal server error: [ 15.943] no screens found EDIT4 There was a file /etc/X11/xorg.conf. As fossfreedom suggested I executed sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backup However, there is still the black screen after reboot. EDIT5 Neutro's advice (reinstalling the headers) did not solve the problem, too. :-( Any further help is appreciated! EDIT6 I just installed driver 173.xxx. After reboot the system shows me only "Checking battery state". Just for information. I will google the problem, but help is also appreciated! ;-) EDIT7 When using the free driver (Ubuntu says that the free driver is in use and activated), Xorg.0.log shows the following errors: [ 9.267] (II) LoadModule: "nouveau" [ 9.267] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 9.267] (II) Module nouveau: vendor="X.Org Foundation" [ 9.267] compiled for 1.10.0, module version = 0.0.16 [ 9.267] Module class: X.Org Video Driver [ 9.267] ABI class: X.Org Video Driver, version 10.0 [ 9.267] (II) LoadModule: "nv" [ 9.267] (WW) Warning, couldn't open module nv [ 9.267] (II) UnloadModule: "nv" [ 9.267] (II) Unloading nv [ 9.267] (EE) Failed to load module "nv" (module does not exist, 0) [ 9.267] (II) LoadModule: "vesa" [...] [ 9.399] drmOpenDevice: node name is /dev/dri/card14 [ 9.402] drmOpenDevice: node name is /dev/dri/card15 [ 9.406] (EE) [drm] failed to open device [ 9.406] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 9.406] (WW) Falling back to old probe method for fbdev [ 9.406] (II) Loading sub module "fbdevhw" [ 9.406] (II) LoadModule: "fbdevhw" EDIT8 In the meanwhile i tried to install WIN7 64 bit on my machine. As a result i got a BSOD after installing the nvidia driver. :-) For this reason i sent my new machine back to the hardware reseller. I will inform you as soon as i have a new system. Thank you all for the great help and support. EDIT9 In the meanwhile I have a complete new system with "only" a MSI N460GTX Hawk, but more RAM. The system works perfect. :-) The original N560GTX had a hardware defect. Is is possible to close this question? THX!

  Read the article

• Resolving the metadata token of a generic type parameter

  - by 280Z28

  Is there any way the .NET 4.0 (or earlier) reflection API to resolve a generic type parameter? See the two lines after my ArgumentException comment for my current attempt. [TestMethod] public void TestGenericParameterTokenResolution() { Type genericParameter = typeof(List<>).GetGenericArguments()[0]; Assert.IsTrue(genericParameter.IsGenericParameter); int metadataToken = genericParameter.MetadataToken; // make sure the metadata token is a GenericParam Assert.AreEqual(metadataToken & 0xFF000000, 0x2A000000); Module module = typeof(List<>).Module; // the following both throw an ArgumentException. Type resolvedParameter = module.ResolveType(metadataToken); resolvedParameter = (Type)module.ResolveMember(metadataToken); Assert.AreSame(genericParameter, resolvedParameter); }

  Read the article

• JBoss 4.3 eap can't find war in an ear

  - by Steveo

  I'm trying to deploy an ear to JBoss. The application.xml has entries looking like: <module id="Core_JavaModule"> <java>APP-INF/lib/core.jar</java> </module> <module id="Public_WebModule"> <web> <web-uri>public.war</web-uri> <context-root>/</context-root> </web> </module> The core.jar is read in OK, but when it tries to read public.war, I get: org.jboss.deployment.DeploymentException: Failed to find module file: public.war I've confirmed that the war directory is there; it is an exploded war. Not a war file. Is JBoss looking for a war file? Or will it grok a war directory?

  Read the article

• Adding Java packages to GWT

  - by Organiccat

  I've tried searching but couldn't come up with a defined way on how to add your own packages to a GWT project. My tree structure looks like this: -com.mycompany -public MyApplication.html MyApplication.gwt.xml -com.mycompany.client MyApp.java -com.mycompany.gui TableLayout.java The answer I've seen out there says to add the packages relative to the root directory of the gwt.xml file, like so: <module> <inherits name="com.google.gwt.user.User" /> <entry-point class="com.mycompany.client.MyApp" /> <source path="client" /> <source path="gui" /> </module> It then complains: Unable to find type 'com.technicon.client.MyApp' Hint: Previous compiler errors may have made this type unavailable Hint: Check the inheritance chain from your module; it may not be inheriting a required module or a module may not be adding its source path entries properly Can anyone tell me what I'm doing wrong and how to fix this?

  Read the article

• Debugger does not break when debugging PowerShell console

  - by Adam Driscoll

  I'm developing a binary PowerShell module. I have a post build event that copies that module into the 'modules' directory in my "Documents\WindowsPowerShell" folder. I then have the project set to launch PowerShell.exe. My module is loaded via Import-Module and off I go. The problem is my break points are never hit and the debugger does not break on exceptions. If I run PowerShell outside of Visual Studio and then attach the debugger to the process I can break just fine. The other strange this is that my break points are not empty. Typically if different source versions are loaded they will be. I'm running Visual Studio 2010 on a Win 7 box. My module is currently targeting .NET 3.5. I've tried running both the x64 and x86 versions of PS with no luck.

  Read the article

• Code and Slides: Techniques, Strategies, and Patterns for Structuring JavaScript Code

  - by dwahlin

  This presentation was given at the spring 2012 DevConnections conference in Las Vegas and is based on my Structuring JavaScript Code course from Pluralsight. The goal of the presentation is to show how closures combined with code patterns can be used to provide structure to JavaScript code and make it more re-useable, maintainable, and less susceptible to naming conflicts.  Topics covered include: Closures Using Object literals Namespaces The Prototype Pattern The Revealing Module Pattern The Revealing Prototype Pattern View more of my presentations here. Sample code from the presentation can be found here. Check out the full-length course on the topic at Pluralsight.com.

  Read the article

• Compare and find differences in two tables in Oracle

  - by Ruslan

  Hi! i have 2 tables: account: ID, ACC, AE_CCY, DRCR_IND, AMOUNT, MODULE flex: ID, ACC, AE_CCY, DRCR_IND, AMOUNT, MODULE I want to show differences comparing only by: AE_CCY, DRCR_IND, AMOUNT, MODULE and ACC by first 4 characters Example: ID ACC AE_CCY DRCR_IND AMOUNT MODULE -- --------- ------ -------- ------ ------ 1 734647674 USD D 100 OP and in flex: ID ACC AE_CCY DRCR_IND AMOUNT MODULE -- --------- ------ -------- ------ ------ 1 734647654 USD D 100 OP 2 734665474 USD D 100 OP 9 734611111 USD D 100 OP ID's 2 and 9 should be shown as differences. If I use FULL JOIN I'll get no differences as substr(account.ACC,1,4) = substr(flex.ACC,1,4) are equal and others are equal and MINUS doesn't work because ID's different. Thanks.

  Read the article

• How to organize Enterprise scale Composite Applications (CAG)

  - by David

  All QuickStarts and RI examples in the CAG documentation are good but I lack the more Enterprise scale examples. Let's say we have 40+ modules, each containing a Proxy,Facade,PresentationModel,Model and Views. Each module also makes calls to a Module-specific WCF service which is to be hosted in IIS or in a stand-alone console host. Our approach have been to include the UI-module, service-module and related tests into one solution so they can be developed and tested separately from other modules. My problem is how the hosting of the services should be done when the services are in separate modules and how to actually run the separate module together with the rest of the application-modules when I press F5. Is there a best practise for this? I guess it has been done before?

  Read the article

• How To Initialize Object Which May Be Used In Catch Clause?

  - by Onorio Catenacci

  I've seen this sort of pattern in code before: //pseudo C# code var exInfo = null; //Line A try { var p = SomeProperty; //Line B exInfo = new ExceptionMessage("The property was " + p); //Line C } catch(Exception ex) { exInfo.SomeOtherProperty = SomeOtherValue; //Line D } Usually the code is structured in this fashion because exInfo has to be visible outside of the try clause. The problem is that if an exception occurs on Line B, then exInfo will be null at Line D. The issue arises when something happens on Line B that must occur before exInfo is constructed. But if I set exInfo to a new Object at line A then memory may get leaked at Line C (due to "new"-ing the object there). Is there a better pattern for handling this sort of code? Is there a name for this sort of initialization pattern? By the way I know I could check for exInfo == null before line D but that seems a bit clumsy and I'm looking for a better approach.

  Read the article

• Modular enterprise architecture using MVC and Orchard CMS

  - by MrJD

  I'm making a large scale MVC application using Orchard. And I'm going to be separating my logic into modules. I'm also trying to heavily decouple the application for maximum extensibility and testability. I have a rudimentary understanding of IoC, Repository Pattern, Unit of Work pattern and Service Layer pattern. I've made myself a diagram. I'm wondering if it is correct and if there is anything I have missed regarding an extensible application. Note that each module is a separate project. Update So I have many UI modules that use the db module, that's why they've been split up. There are other services the UI modules will use. The UI modules have been split up because they will be made over time, independent of each other.

  Read the article

< Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >