Search Results

Search found 4846 results on 194 pages for 'rpg master'.

Page 122/194 | < Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >

• if there are multiple kernel module can drive the same device, what is the rule to choose from them?

  - by Dyno Fu

  both pcnet32 and vmxnet can drive the device. $ lspci -k ... 02:01.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 10) Subsystem: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] Flags: bus master, medium devsel, latency 64, IRQ 19 I/O ports at 2000 [size=128] [virtual] Expansion ROM at dc400000 [disabled] [size=64K] Kernel driver in use: vmxnet Kernel modules: vmxnet, pcnet32 both kernel modules are loaded, $ lsmod | grep net pcnet32 32644 0 vmxnet 17696 0 mii 5212 1 pcnet32 as you see, kernel driver in use is vmxnet. is there any policy/algorithm in kernel how to choose from the candidates?

  Read the article

• What are performance limits of a database?

  - by Tommy

  What are some rough performance limits (read/s, write/s) for a single database server (no master-slave architecture), assuming storage on disk? How many read/s, write/s, depending on the kind of disk? (SSD vs non-SSD) , assuming simple operations (select one row by primary key, update one row, correctly indexed). I assume this limit is dependent on disk seek/write. EDIT: My question is more about getting rough metrics of the number of operations a database supports: to be able to know for example, if a new feature triggering 300 inserts/s can be supported without scaling out with additional servers.

  Read the article

• A download manager for Linux which saves downloaded files in directories by date like 2012_06_29

  - by Gart

  I've been using Download Master on Windows for years and what I liked most about it is that this program can automatically put downloaded files into directories by download date: /Downloads | |--/2012_06_28 | | | |--a.zip | |--b.pdf | ... | |--/2012_06_29 | | | |--c.txt | ... ... I'm looking for something similar for Linux. Is there any free download manager that can do this? I have tried KGet and uGet but they both seem to lack this feature. If there is a way to configure them to do that, I'll be happy to know about it. Thank you.

  Read the article

• Why didn't cable select work?

  - by jldugger

  I got roped into doing tech support for a friend of the family. Obviously I'd already failed to hide my powers, ala Penny Arcade. Anyways, the guy bought a DVD burner OEM from Microcenter, and asked me to install it. So I stopped by before and thought I'd be slick and use Cable Select on the jumpers. I didn't get a chance to test it before it I had to leave, and it seems that this didn't work. I came back this week to investigate, and he explains he's confused how none of the software he downloaded was able to burn. So on a whim I switch it to explicit master / slave, and it starts working fine. Whoops. Well, at least it's not the extra crap he found and downloaded for free from the internet. Why doesn't setting both jumpers to Cable Select solve this?

  Read the article

• Ubuntu 9.10 LiveCD stalls after "Install Ubuntu" selected from boot menu on eMachines

  - by nicorellius

  I am trying to install Ubuntu 9.10 from the ISO on a CD (it needs to be this version) on an eMachine with a brand new Seagate hard disk. The CD boots OK, and I choose the language. Then I am presented with the boot menu: Try Ubuntu Install Ubuntu etc I have tried the top two choices several times (trying Ubuntu and installing it), but each and every time the installation stalls and the disc stops spinning right after I hit enter after choosing the option I want. I have tried different CD/DVD drives, changing the jumpers on both CD drives, different hard drives, and nothing works. Maybe there is a BIOS setting that is choking the installation? Any help would be appreciated. Edit - I just tried running the hard drive as the master on the primary IDE and the CD drive as the slave on the primary with the same results. Maybe flash the BIOS?

  Read the article

• How to tell if OpenGL is really working in Ubuntu 10.04

  - by Jonathan

  I have a lenovo S9e running Intel integrated graphics. Here is my lspci output related to the graphics: 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: Lenovo Device 3870 Flags: bus master, fast devsel, latency 0 Memory at f0580000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 2 I want to know how I can make sure OpenGL support is running in full on an Ubuntu 10.04 installation. I have a few hints to think that it is not: The "Desktop Effects" will not load Apps such as stardock, when attempting to use OpenGL rendering, will display black boxes instead of transparency In the games Pioneers, the number-tile icons are suspiciously just black circles Windows games running with Wine will only support software rendering, not hardware rendering When I boot into a Knoppix LiveCD, the desktop effects do work, splendidly, meaning compiz detects my computer as capable. My problem with troubleshooting is that Canonical has basically eliminated the conf-file-based mechanism of X11 as far as I can tell, thus making it even harder to ensure graphics modules are loading properly. How do I debug and test OpenGL on m Ubuntu 10.04 installation?

  Read the article

• Upgrading Active Directory from 2000 to 2008

  - by Doug

  Our config is currently: 1 Windows 2000 domain controller running ISA2000, dhcp, dns 1 Windows 2003 domain controller as main file server, prob cert server as well, dhcp, dns 1 Windows 2008/Exchange2010 domain controller as Exchange server, DHCP,DNS Currently getting FRS errors on files server journalwrap error Currently getting FRS errors on othe DC's can't replicate from above Exchange DC holds Schema, rid,pdc, and infastructure roles File Server holds Domain namaing operation master role WOW, I didn't set this up, just inherited it. Am I right to assume that fixing the FRS errors is #1, what do I need to do for that? set enable journalwrap auto restore in registry? Demote W2000 domain controller, should that have any implications for ISA? We have Forefront to be deployed but that's another day Transfer Domain Nameing Role to Exchange server (I know or think having an Exchange server as DC isn't best practive) We will be getting another server W2008 to replace current file server and I thought it could takeover all roles once deployed Demote W2k3 file server and then raise functional domain level to 2008 Am I missing anything other that the sense to walk away? Thanks

  Read the article

• Cannot boot from a hard drive

  - by Martin Melka

  I have a problem booting from a hdd. I used to have it as my main drive before I bought an SSD, so I had been able to boot from it. But for some reason, now, half a year later, I can't get it to work. I completely erased it, deleting data and partitioning (using EASEUS Partition Master), then I installed Kubuntu (without changing anything in the installer), but it simply won't boot up. It always boots the drive with Windows and when I unplug this drive, it only gives me an error "PXE-E61: Media test failure, check cable", I guess it's trying to boot from LAN. I tried installing the system on a freshly deleted drive, without any other drives plugged in the pc, but the problems persist. This is how the drives look now (first one has Windows 7 installed, the second one Kubuntu): I am lost. I mean, after doing a fresh wipe and a clean install without altering anything, it should work. But it doesn't. What can be wrong here? Thanks

  Read the article

• Mount CIFS share with autofs

  - by Phanto

  I have a system running RHEL 5.5, and I am trying to mount a Windows share on a server using autofs. (Due to the network not being ready upon startup, I do not want to utilize fstab.) I am able to mount the shares manually, but autofs is just not mounting them. Here are the files I am working with: At the end of /etc/auto.master, I have: ## Mount this test share: /test /etc/auto.test --timeout=60 In /etc/auto.test, I have: test -fstype=cifs,username=testuser,domain=domain.com,password=password ://server/test I then restart the autofs service. However, this does not work. ls-ing the directory does not return any results. I have followed all these guides on the web, and I either don't understand them, or they.just.don't.work. Thank You

  Read the article

• Test tomcat for ssl renegotiation vulnerability

  - by Jim

  How can I test if my server is vulnerable for SSL renegotiation? I tried the following (using OpenSSL 0.9.8j-fips 07 Jan 2009: openssl s_client -connect 10.2.10.54:443 I see it connects, it brings the certificate chain, it shows the server certificate, and last: SSL handshake has read 2275 bytes and written 465 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 1024 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 50B4839724D2A1E7C515EB056FF4C0E57211B1D35253412053534C4A20202020 Session-ID-ctx: Master-Key: 7BC673D771D05599272E120D66477D44A2AF4CC83490CB3FDDCF62CB3FE67ECD051D6A3E9F143AE7C1BA39D0BF3510D4 Key-Arg : None Start Time: 1354008417 Timeout : 300 (sec) Verify return code: 21 (unable to verify the first certificate) What does Secure Renegotiation IS supported mean? That SSL renegotiation is allowed? Then I did but did not get an exception or get the certificate again: verify error:num=20:unable to get local issuer certificate verify return:1 verify error:num=27:certificate not trusted verify return:1 verify error:num=21:unable to verify the first certificate verify return:1 HTTP/1.1 200 OK Server: Apache-Coyote/1.1 Content-Type: text/html;charset=ISO-8859-1 Content-Length: 174 Date: Tue, 27 Nov 2012 09:13:14 GMT Connection: close So is the server vulnerable to SSL renegotiation or not?

  Read the article

• Excel: What formula combines this data into one COUNT amount?

  - by Mike

  I have 30 colleagues who are answering questions over 3 time periods. Each has their own Excel workbook with the questions, and over the year they update it. I collate their worksheets into one master worksheet, but now need to combine their answers into a simple table. The questions, the time periods and then a COUNT of how many answered it. For example: I need a table that shows me how many people (not the persons name at this point) answered question 10 in time period 2. I can't use a database before someone mentions it ;). Many thanks Mike.

  Read the article

• Dovecot/Postfix-mysql e-mail Aliases are not correctly forwarded

  - by jo_fryli

  I recently set up Dovecot/postfix-mysql on my Debian Squeeze Server and I have a bit of a problem. When ever I send a email to an alias ([email protected] forwarded to [email protected] for example) Postfix (or Dovecot, I'm not quite sure) puts this email into a Mailbox rather than forwarding it to the real Mail-Adress. I have tested all the MySQL queries and they all behave the way I intend them to do. foobar dovecot: deliver([email protected]): msgid=<000001385b464c9a-e40af11e-3bf4-49f6-903d-1d2369f6bfb6-000000@barfoo: saved mail to INBOX master.cf main.cf Keep in mind that normal E-Mail sending and receiving works just fine! I have set up my MySQL Tables with Postfixadmin. Thanks for your help!

  Read the article

• Using VirtualBox/VMWare to deploy software to multi sites ?

  - by Sim

  Hi all, I'm currently evaluating the feasibility of using VirtualBox (or VMWare) to deploy the follow project to 10 sites Windows XP MSSQL 2005 Express Edition with Advanced Services JBoss to run 1 in-house software that mostly query master data (customers/products) and feed to other software Why I want to do this ? Because the IT staffs in my 10 sites are not capable enough and the steps taken to setup those "in-house project" are also complicated What are the cons I can forsee ? Need extra power to run that virtualbox instance The IT staffs won't be much knowledgeable 'bout how to install the stuffs Cost (license for VirtualBox in commercial environment as well as extra OS license) I really seek your inputs on the pro/con of this approach, or any links that I can read further Thanks a lot

  Read the article

• How to stop nginx on Mac OS 10.6.3

  - by Alex Kaushovik

  I've installed nginx server on my Mac from MacPorts: sudo port install nginx. Then I followed the recommendation from the port installation console and created the launchd startup item for nginx, then started the server. It works fine (after I renamed nginx.conf.example to nginx.conf and renamed mime.types.example to mime.types), but I couldn't stop it... I tried sudo nginx -s stop - this doesn't stop the server, I can still see "Welcome to nginx!" page in my browser on http://localhost, also I still see master and worker processes of nginx with ps -e | grep nginx. What is the best way to start/stop nginx on Mac? BTW, I've added "daemon off;" into nginx.conf - as recommended by various resources. Thank you.

  Read the article

• Why doesn't SuperGenPass work on some sites when I use Chrome?

  - by Lunatik

  Bookmarklet SuperGenPass sometime fails to popup when I click the bookmark in Chrome. It does however work when on the same page works in Firefox; an example is http://www.engadget.com/login This behaviour also replicated on a new Chrome tab (understandably, there is no domain), but some sites just fail to launch it meaning you have to go to another site, open it up, enter in [something] to get the 'Regenerate password' link, enter the domain manually then finally enter your master password to get the generated password! Something about the makeup of the page seems to make SuperGenPass think that it isn't able/required to popup. The FAQ doesn't make any mention of this fact, neither does a quick Google turn up anything that looks relevant. Does anyone else have the same issue? How can it be fixed? I'm on Windows using the current release of Chrome (5.x at the moment, but probably 18.x by the time you read this next week based on Google's seemingly logarithmic release numbering).

  Read the article

• Why are my USB 2.0 devices crashing Windows XP?

  - by BenAlabaster

  Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic ATX motherboard with no identifying markings other than one stamp that says "Rev.B". CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. On board it has 1 x 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors. It has a DVD+/-RW running as master on IDE1 and a 1.44Mb 3.5" floppy drive connected to the floppy connector. It has an 80Gb Western Digital hard drive running as master on IDE0. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

  Read the article

• Use procmail to deliver to stdout and a second server

  - by Halfgaar

  I would like a Postfix server to deliver each message to a certain transport as well as relay to a second server. In master.cf, I have the following transport: zarafa unix - n n - 10 pipe flags= user=vmail argv=/usr/bin/zarafa-dagent ${user} Because I can't get Postfix to deliver to two transports, what I probably need, is a wrapper transport, using procmail maybe, that delivers to zarafa-dagent and relays to a second server (not just forward to an address; relay to a second server). It can also be a script that calls sendmail or whatever, but at the moment, I don't know how to proceed.

  Read the article

• RDS Replication across regions

  - by Bryan Migliorisi

  We are using Amazon AWS for our web services but given the recent instabilities in their infrastructure, we are trying to figure out how to run our application across multiple regions for additional redundancy. Ideally, we would run our entire app in a active-active configuration in multiple regions but our main concern is that we are using RDS, which I understand cannot replicate across regions. One possible solution (though we have not tried or proven it would work) would be to do mysqldump or EBS snapshots every hour or so but this would mean that we would be forced to run in an active-passive configuration. Our data would be at most an hour behind. This carries its own issues around data synchronization when we failover and the master comes back up, so its not the best solution. Are there any proven solutions for replicating RDS across regions?

  Read the article

• data not reloading into tableview from core data on minor update

  - by Martin KS

  I've got a basic photo album application, on the first view a list of albums is displayed with a subtitle showing how many images are in each album. I've got everything working to add albums, and add images to albums. The problem is that the image count lines are accurate whenever the app loads, but I can't get them to update during execution. The following viewdidload correctly populates all lines of the tableview when the app loads: - (void)viewDidLoad { [super viewDidLoad]; // Set the title. self.title = @"Photo albums"; // Configure the add and edit buttons. self.navigationItem.leftBarButtonItem = self.editButtonItem; addButton = [[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemAdd target:self action:@selector(addAlbum)]; addButton.enabled = YES; self.navigationItem.rightBarButtonItem = addButton; /* Fetch existing albums. Create a fetch request; find the Album entity and assign it to the request; add a sort descriptor; then execute the fetch. */ NSFetchRequest *request = [[NSFetchRequest alloc] init]; NSEntityDescription *entity = [NSEntityDescription entityForName:@"Album" inManagedObjectContext:managedObjectContext]; [request setEntity:entity]; // Order the albums by name. NSSortDescriptor *sortDescriptor = [[NSSortDescriptor alloc] initWithKey:@"albumName" ascending:NO]; NSArray *sortDescriptors = [[NSArray alloc] initWithObjects:sortDescriptor, nil]; [request setSortDescriptors:sortDescriptors]; [sortDescriptor release]; [sortDescriptors release]; // Execute the fetch -- create a mutable copy of the result. NSError *error = nil; NSMutableArray *mutableFetchResults = [[managedObjectContext executeFetchRequest:request error:&error] mutableCopy]; if (mutableFetchResults == nil) { // Handle the error. } LocationsAppDelegate *mainDelegate = (LocationsAppDelegate *)[[UIApplication sharedApplication] delegate]; // Set master albums array to the mutable array, then clean up. [mainDelegate setAlbumsArray:mutableFetchResults]; [mutableFetchResults release]; [request release]; } But when I run similar code inside viewdidappear, nothing happens: { /* Fetch existing albums. Create a fetch request; find the Album entity and assign it to the request; add a sort descriptor; then execute the fetch. */ NSFetchRequest *request = [[NSFetchRequest alloc] init]; NSEntityDescription *entity = [NSEntityDescription entityForName:@"Album" inManagedObjectContext:managedObjectContext]; [request setEntity:entity]; // Order the albums by creation date, most recent first. NSSortDescriptor *sortDescriptor = [[NSSortDescriptor alloc] initWithKey:@"albumName" ascending:NO]; NSArray *sortDescriptors = [[NSArray alloc] initWithObjects:sortDescriptor, nil]; [request setSortDescriptors:sortDescriptors]; [sortDescriptor release]; [sortDescriptors release]; // Execute the fetch -- create a mutable copy of the result. NSError *error = nil; NSMutableArray *mutableFetchResults = [[managedObjectContext executeFetchRequest:request error:&error] mutableCopy]; if (mutableFetchResults == nil) { // Handle the error. } LocationsAppDelegate *mainDelegate = (LocationsAppDelegate *)[[UIApplication sharedApplication] delegate]; // Set master albums array to the mutable array, then clean up. [mainDelegate setAlbumsArray:mutableFetchResults]; [self.tableView reloadData]; [mutableFetchResults release]; [request release]; } Apologies if I've missed the answer to this question elsewhere, but what am I missing?

  Read the article

• Why are my USB 2.0 devices hanging Windows XP?

  - by BenAlabaster

  Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic ATX motherboard with no identifying markings other than one stamp that says "Rev.B". CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. On board it has 1 x 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors - it has a NEC uPD720102 chipset. It has a DVD+/-RW running as master on IDE1 and a 1.44Mb 3.5" floppy drive connected to the floppy connector. It has an 80Gb Western Digital hard drive running as master on IDE0. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine? Edit: Updated the USB 2.0 info with reference to actual card - http://www.xpcgear.com/lpnec4u.html

  Read the article

• Uninstalled Ubuntu, no GRLDR?

  - by user32965

  So I'm a big fat idiot. I installed Ubuntu 11.04 on my school's laptop, and here's come the time that I have to turn it back in. I wrote GRUB to the Master Boot Record, thinking it wasn't going to be permanent. So, fast forward to yesterday. I decided to hell with this, and popped in my Windows 7 CD, deleted the whole partition, formatted to NTFS, and installed Windows 7 on it. I'm surfing the web and my computer overheats [totally typical] I boot up, and get this: Try (hd0,0): FAT32: No GRLDR Try (hd0,1): invalid or null Try (hd0,2): invalid or null Try (hd0,3): invalid or null Try (hd1,0): NTFS5: No grldr Try (hd1,1): invalid or null Try (hd1,2): invalid or null Try (hd1,3): invalid or null Cannot find GRLDR. Press space bar to hold the screen, any other key to boot previous MBR... Timeout: 5 The timeout part just counts down to 0 from 5. I need to turn in this thing before tomorrow, please please please can someone help me out?

  Read the article

• Optimal way to make MySQL backups for fairly large databases (MyISAM / InnoDB)

  - by WinkyWolly

  Currently we have one beefy MySQL database that runs a couple of high traffic Django based websites as well as some e-commerce websites of decent size. As a result we have a fair amount of large databases using both InnoDB and MyISAM tables. Unfortunately we've recently hit a wall due to the amount of traffic so I've setup another master server to help alleviate reads / backups. Now at the moment I simply use mysqldump with a few arguments and it's proven to be fine.. until now. Obviously mysqldump is a slow quick method however I believe we've outgrown its use. I now need a good alternative and have been looking into utilizing Maatkits mk-parallel-dump utility or an LVM snapshot solution. Succinct short version: I have a fairly large MySQL databases I need to backup Current method using mysqldump is inefficient and slow (causing issues) Looking into something such as mk-parallel-dump or LVM snapshots Any recommendations or ideas would be appreciated - since I have to re-do how we're doing things I rather have it done properly / most efficient :).

  Read the article

• ASP.NET gridview control in side update panel has a problem

  - by Eyla

  Greetings, I have gridview with SelectedIndexChanged event. when I click on a record in gridview it should call the SelectedIndexChanged event and do some operations. SelectedIndexChanged event is working OK, but when I put the gridview inside ajax updatepanle SelectedIndexChanged event will not response even if I add AsyncPostBackTrigger trigger for SelectedIndexChanged event. Please look at my code and advice me what I should do!! Thank you <%@ Page Title="" Language="C#" MasterPageFile="~/Master.Master" AutoEventWireup="true" CodeBehind="WebForm1.aspx.cs" Inherits="IMAM_APPLICATION.WebForm1" %> <%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="cc1" %> <asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" runat="server"> <div id="mydiv"> <asp:UpdatePanel ID="UpdatePanel1" runat="server"> <ContentTemplate> <br /> <br /> <br /> <asp:GridView ID="GridView1" runat="server" style="position:absolute; top: 280px; left: 30px; height: 240px; width: 915px;" PageSize="5" onselectedindexchanged="GridView1_SelectedIndexChanged" AutoGenerateColumns="False" DataKeyNames="idcontact_info"> <Columns> <asp:CommandField ShowSelectButton="True" /> <asp:BoundField AccessibleHeaderText="Midle Name" DataField="Midle_Name" /> <asp:BoundField DataField="Last_Name" HeaderText="Last Name" /> <asp:BoundField DataField="Phone_home" HeaderText="Phone Home" /> <asp:BoundField DataField="cell_home" HeaderText="Mobile Home" /> <asp:BoundField DataField="phone_work" HeaderText="Phone Work" /> <asp:BoundField DataField="cell_Work" HeaderText="Mobile Work" /> <asp:BoundField DataField="Email_Home" HeaderText="Personal Home" /> <asp:BoundField DataField="Email_work" HeaderText="Work Email" /> </Columns> </asp:GridView> <br /> <br /> <br /></ContentTemplate> <Triggers> <asp:AsyncPostBackTrigger ControlID="GridView1" EventName="SelectedIndexChanged" /> </Triggers> </asp:UpdatePanel> <asp:RadioButton ID="rdoSearchFlat" runat="server" style="position:absolute; top: 565px; left: 70px;" Text="Flat Search" GroupName="Search"/> <asp:TextBox ID="txtSearch" runat="server" style="position:absolute; top: 560px; left: 170px;" ></asp:TextBox> <asp:Button ID="btnSearch" runat="server" Text="Search" style="position:absolute; top: 555px; left: 375px;" CausesValidation="False" onclick="btnSearch_Click"/> <asp:Label ID="Label7" runat="server" Style="position: absolute; top: 630px; left: 85px;" Text="First Name"></asp:Label> <asp:TextBox ID="txtFirstName" runat="server" Style="top: 630px; left: 185px; position: absolute; height: 22px; width: 128px"> </asp:TextBox> </div> </asp:Content>

  Read the article

• How do I set up a bridge on Ubuntu GNOME 14.04

  - by NJRandy

  I found a guide for setting up a bridge in Fedora and was trying this: $ nmcli connection delete p33p1 $ nmcli connection add con-name br0 type bridge ifname br0 autoconnect yes $ nmcli connection add con-name p33p1 type bridge-slave ifname p33p1 master br0 autoconnect yes I found that $ nmcli con delete uuid [uuid here] accomplished the first step. nmcli connection does not have an 'add' action in this distribution. Please help me do the 2nd and 3rd steps. Context: I am trying to set up a virtual machine. I believe this is a necessary step for the VM to access my network and the internet. Please feel free to correct me if I am wrong! BTW, I am a linux newbie, tech oldie. Thank you.

  Read the article

• new pc..noisy fan

  - by BRQ

  It's a new build, but it's always had noisy fans. From start to end, they will not stop running. The case is a cooler master which I believe comes with a fan that is not controlled by BIOS (according to technician), so that may be the source of the problem..but my lack of knowledge on the matter prevents me from making a reasonable assessment. Here are readings from CoreTemp: Model: Intel Core i7 870 (Lynnfield) Platform: LAG 1156 (Socket H) Frequency: 1658.23MHz (132.66 x 12.5) Tj. Max: 99 C Core #0: low= 34 C; high= 42 C; Load= 0% Core #1: low 31 C; high 42 C; load= 0% Core #3: 35 C; 42 C; 0% Any input will be appreciated.

  Read the article

< Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >