Search Results

Search found 14951 results on 599 pages for 'connect by'.

Page 123/599 | < Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >

• How to limit access to Exchange 2003 Mobile Activesync server by user?

  - by micilin

  So I was asked to set up an Exchange Activesync mobile gateway. That's done. It's a separat eExchange 2003 front-end server configured for SSL, and I've put an off-domain ISA server in front of it. Now I'm being asked to limit which users can connect to it. By default an Exchange front-end server allows any user who has a mail account to connect to the front -end server. So I'm looking at the permissions on the various IIS sites/apps on the server, but I know that it's easy to break Exchange Front-end server perms. So I've got the following in IIS: Exadmin Exchange EchWeb Microsoft-SErver-ActiveSync MobileAdmin OMA And a couple of others that I dont think are relevant. Can I change the permissions on one of these to restrict who can connect to Activesync? As a bonus: Can I do it in a way that does not affect ordinary browser based Exchange Access? Thanks in Advance!!

  Read the article

• Routing tables don't show ppp0 after 12.04 kernel upgrade to 3.5.0: Haier CE682 modem configuration

  - by ubunsteve

  I'm trying to get my Haier CE682 EVDO modem, model number 201e:1022 to work in ubuntu 12.04 kernel 3.5.0-030500-generic #201207211835 . I had it working in a previous 12.04 kernel, using compat-wireless and these instructions http://zulkhamsyahmh.blogspot.com/2012/05/install-smartfren-haier-ce682-on-ubuntu.html, and to get it working had to edit the routing tables so that there was a ppp0 showing up, as suggested at http://www.linuxquestions.org/questions/slackware-14/wvdial-is-connecting-but-im-unable-to-do-anything-714861/ Network manager doesn't work with this modem, so I use either wvdial or gpppon to connect to it, both which work (after I run the command sudo modprobe usbserial vendor=0x201e product=0x1022 ) This is the output of when I connect with gpppon to the modem: Using interface ppp0 Connect: ppp0 <-- /dev/ttyUSB0 sent [LCP ConfReq id=0x1 ] rcvd [LCP ConfAck id=0x1 ] rcvd [LCP ConfReq id=0x2 ] sent [LCP ConfAck id=0x2 ] sent [LCP EchoReq id=0x0 magic=0x819c86db] rcvd [CHAP Challenge id=0x1 <1ac8f12799e953967a3cc222c9254690, name = ""] sent [CHAP Response id=0x1 <6f12a903dc40915ca2761c17b87f8fbd, name = "smart"] rcvd [LCP EchoRep id=0x0 magic=0x0] rcvd [CHAP Success id=0x1 ""] CHAP authentication succeeded CHAP authentication succeeded sent [CCP ConfReq id=0x1 ] sent [IPCP ConfReq id=0x1 ] rcvd [IPCP ConfReq id=0x1 ] sent [IPCP ConfAck id=0x1 ] rcvd [CCP ConfReq id=0x1] sent [CCP ConfAck id=0x1] rcvd [CCP ConfRej id=0x1 ] sent [CCP ConfReq id=0x2] rcvd [IPCP ConfRej id=0x1 ] sent [IPCP ConfReq id=0x2 ] rcvd [CCP ConfAck id=0x2] rcvd [IPCP ConfNak id=0x2 ] sent [IPCP ConfReq id=0x3 ] rcvd [IPCP ConfAck id=0x3 ] not replacing existing default route via 192.168.3.1 local IP address 10.191.248.154 remote IP address 10.17.95.25 primary DNS address 10.17.3.244 secondary DNS address 10.17.3.245 as you can see there is a problem with "not replacing existing default route via 192.168.3.1" This it the out put of route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.3.1 0.0.0.0 UG 0 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.3.0 * 255.255.255.0 U 2 0 0 wlan0 I had tried these commands, which had previously worked in the earlier kernel: route del default route add default ppp0 but that broke my wireless internet connection. I then added the default routing as shown above with sudo route add default gw 192.168.3.1 wlan0 So it seems I need to add or change the routing to show a ppp0 connection, but I don't know how to do that.

  Read the article

• ldirectord refusing connection when nginx redirects from http to https

  - by Adam

  I am running ldirector as a load balancer to an nginx front end server. If I setup a redirect from http to https and connect directly to the nginx server, all is well. Connecting via ldirector causes my connection to be refused. I can connect normally via http or https through ldirector when I don't have the redirect in place. To add to my confusion, if my application issues a redirect from http to https, it works. I am testing this via curl on the command line. (curl: (7) couldn't connect to host vs a response) I am using the standard ldirectord config (http://www.ultramonkey.org/3/topologies/config/lb/non-fwmark/linux-director/ldirectord.cf) the http and https parts. My nginx config for the redirect is simply: location / { rewrite ^(.*) https://$host$1 permanent; }

  Read the article

• Can't reach custom C# forms application remotely.

  - by gnucom

  Hello, I'm working in Windows Server 2008. I have a very basic C# forms application (not a service) that is listening on a port, say 56112. When using telnet I can connect from the localhost and send and receive data. For some reason I cannot remotely connect to the application. I know I have a connection because I can telnet to 23 on the remotely fine. I've opened this port on the firewall, created rules in/out in advanced firewall, disabled the firewall completely, and more. Any suggestions would be great! This is the telnet output: Microsoft Telnet> open server.cc 56112 Connecting server.cc...Could not open connection to the host, on port 56112: Connect failed

  Read the article

• Graph data structures and journal format for mini-IDE

  - by matec

  Background: I am writing a small/partial IDE. Code is internally converted/parsed into a graph data structure (for fast navigation, syntax-check etc). Functionality to undo/redo (also between sessions) and restoring from crash is implemented by writing to and reading from journal. The journal records modifications to the graph (not to the source). Question: I am hoping for advice on a decision on data-structures and journal format. For the graph I see two possible versions: g-a Graph edges are implemented in the way that one node stores references to other nodes via memory address g-b Every node has an ID. There is an ID-to-memory-address map. Graph uses IDs (instead of addresses) to connect nodes. Moving along an edge from one node to another each time requires lookup in ID-to-address map. And also for the journal: j-a There is a current node (like current working directory in a shell + file-system setting). The journal contains entries like "create new node and connect to current", "connect first child of current node" (relative IDs) j-b Journal uses absolute IDs, e.g. "delete edge 7 - 5", "delete node 5" I could e.g. combine g-a with j-a or combine g-b with j-b. In principle also g-b and j-a should be possible. [My first/original attempt was g-a and a version of j-b that uses addresses, but that turned out to cause severe restrictions: nodes cannot change their addresses (or journal would have to keep track of it), and using journal between two sessions is a mess (or even impossible)] I wonder if variant a or variant b or a combination would be a good idea, what advantages and disadvantages they would have and especially if some variant might be causing troubles later.

  Read the article

• Cannot Enter Repro Admin Web Interface at Port 5080

  - by aqua

  I have followed the instructions on this website www.rtcquickstart.org to set up my firewall, DNS settings, TLS, and have installed the TURN server and repro proxy as instructed, and have restarted repro. However, I am not able to access the web interface of repro on port 5080, either at localhost:5080 / 127.0.0.1:5080 or at the server's IP address: IPADDRESS:5080 (I have set the server's IP for binding in repro.config). I get the browser error message: 'Unable to connect to server' whenever trying to connect to the web interface via port 5080. I initially had Apache2 installed, which loaded pages correctly at port 80 / address root, and when checked it 'listened' at port 5080 after it was configured in /etc/apache2/ports.conf, however the repro web interface still did not work at port 5080. I have tried uninstalling Apache2 in case that was conflicting with repro's web server, but the problem persists, and testing port 5080 now shows that nothing is 'listening' on port 5080. I have tried reinstalling / purging repro but it has not helped. My router is correctly set to allow all ports; port 5080 is open and forwarding correctly. I can connect to the internet and ping all websites through the server and everything else is working correctly. I would be gateful if anyone could offer advice on how to solve this problem.

  Read the article

• How to show disconnect network drives

  - by Jake

  Windows 7 and Vista laptops in my company domain has network drives set up by Win2k8 Server GPO. Normally, when the laptops has ethernet cable plugged in before boot, the network drives connect and appear as expected at the end of startup sequence. However, when the laptop has ethernet cable unplugged, the network drives are not connected, which is fine, but the disconnected icons disappear as well. i.e. the drives are not set up. At the end of the startup sequence, upon reaching desktop, the wireless adapters will connect to the network and the laptop will be able to find the network drive. Hence I want the drives to be setup nonetheless, so that the next attempt to connect, say, via a desktop shortcut, will reestablish the network drive connection. How can this be done?

  Read the article

• XAMPP MySQL stops running after ~1.5 seconds

  - by Nona Urbiz

  I have tried installing it as a service. Nothing seems to work! I have checked the status page and MySQL is listed as "Deactivated". When trying to open phpMyAdmin I get: Error MySQL said: Documentation #1045 - Access denied for user 'root'@'localhost' (using password: NO) Connection for controluser as defined in your configuration failed. phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server. and from the CD demo: Warning: mysql_connect() [function.mysql-connect]: Access denied for user 'root'@'localhost' (using password: NO) in C:\xampp\htdocs\xampp\cds.php on line 77 Could not connect to database! Is MySQL running or did you change the password?        Thanks for any suggestions or help you can give!

  Read the article

• FTP Connection established...Connection timed out problem with all my sites and FTP programs?

  - by janoChen

  Just few hours ago FileZilla was working fine. Then, suddenly I started to get this error: Status: Resolving address of ftp.readtypechinese.com Status: Connecting to 69.175.14.60:21... Status: Connection established, waiting for welcome message... Error: Connection timed out Error: Could not connect to server And it happens with all my sites: Status: Resolving address of edasich.dreamhost.com Status: Connecting to 173.236.223.223:21... Status: Connection established, waiting for welcome message... Error: Connection timed out Error: Could not connect to server I'm using FileZilla 3.5.0 and Ubuntu 11.10. Any suggestions to fix this? (I already tried Passive mode and it doesn't work). EDIT: Ocasionally, the log goes beyond the ...waiting for welcome message: Status: Connection established, waiting for welcome message... Response: 220 DreamHost FTP Server Command: USER aleche23 Error: Connection timed out Error: Could not connect to server But the connection gets timed out again. Weird...I just realized that I have the same problems with other FTP programs too: gFTP: Looking up ftp.readtypechinese.com Trying readtypechinese.com:21 Connected to readtypechinese.com:21 220 ProFTPD 1.3.2 Server (server) [69.175.14.60] USER [email protected] Connection to ftp.readtypechinese.com timed out

  Read the article

• How to browse to a webserver which is reachable through the SSH port only

  - by GetFree

  I have a server at work which is behind a firewall (the company's firewall) so it is reachable only thrugh port 22 (SSH). I'm able to connect to the server with putty without problems. Also, that server has Apache running and listening on port 80 as usual. But I cant connect to the website using my browser since port 80 (and everyone else) is blocked by the company's firewall. Is there a way I can make my browser to connect to Apache in that server so I can browse the site I'm working on? Thanks.

  Read the article

• How to get Wifi Working Properly - I am Noob

  - by user287853

  I'm a noob to Ubuntu, but not computers. I installed a full version of Ubuntu version 12 whatever it is. I run it on a machine that has Win7/Win8 on another hard drive. My wireless adapter is some tiny USB stick I got on eBay - it works great in Windows, but I can't get it to work in Ubuntu. More precisely, Ubuntu is providing me a list (sometimes) of wireless networks in the area and when I try to connect to mine it just keeps password prompting me even though the one I use is correct. I looked over all the settings multiple times and don't believe there is anything in error regarding what it takes to connect to my network. So, I thought maybe it is a driver issue and came across NDIS. I thought I should try installing it, but I don't know how when I can't connect the Ubuntu machine to the Internet. I tried some commands to no avail. I have the Ubuntu installation disc and it shows a NDIS common and utils .deb files in there. Can someone out there help me out to get this wireless setup so I can get online?

  Read the article

• Remote desktop connection drops before login can appear

  - by Keatly

  Hi Everyone, Someone asked this question a few months ago and I have the exact same problem. I have tried all of the suggested solutions in the other posting (in particular reinstalling the video card on the server), but have not had any luck. I have gone through this troubleshooting guide in detail with no results: http://theillustratednetwork.mvps.org/RemoteDesktop/RemoteDesktopSetupandTroubleshooting.html I have a client with Remote Desktop enabled that I can't connect to in our local network. When I enter in the machine ip/port in the connect box and hit Connect, it briefly gives the normal "Connecting..." dialog box. However, after 2 seconds it just drops. No error message, nothing. Just disappears as if nothing was happening. •Windows XP SP3 •Windows firewall is open for 3389TCP •Machine is on a domain •RDP is enabled in My Computer •User is a local admin I have loads of other machines on the same domain with the same GPO that work fine. Any ideas?

  Read the article

• Outlook Anywhere remote https connection issue

  - by holian

  We have SBS 2003, and we use DYNDNS. We forward dyndns address 443 to local server ip 443 port. mycompany.dyndns.org:443 -- server.mycompany.local:443 In android phone i can check my mails with Outlook Active Snyc. From remote machine i can check my mails in owa (https://mycompany.dyndns.org/exchange) But i can't set up outlook 2013 to remote connect. I installed server.mycompany.local to remote machine trusted cert container, but i got error message: "There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site. Outlook is unable to connect to the proxy server. (Error Code 10)" Is it possible to connect exchange, via dnydns? Whats the problem? Thank you

  Read the article

• running adb via wifi on ubuntu 13.04

  - by Blaze Tama

  First, im new on linux so please bear with me. I have a rooted android phone and i was able to run the adb via wifi network on windows, where i just need to go to the adb's directory and type adb connect. However, i can't just do that in my ubuntu. Everytime i enter adb connect, the terminal always said that i dont have the adb and i must install it. When i check the ADT Bundle (I downloaded the bundled one from here), i can see the adb is there inside the platform-tools folder. I already tried to change the directory to the platform-tools and run the adb connect from there, but its still not working. Do i need to install the adb again via terminal? Or did i miss something? You may be wondering why dont i just download the adb (again) via terminal and do trial and error? The answer is because i dont have a good internet connection, so i want to avoid unnecessary downloads. Thanks for your time :D

  Read the article

• Connecting server to more than one switch.

  - by Jake

  I have 3 switches, one NEATGEAR GS748T and two JGS524. Initially I wanted to connect them in a triangle loop, but later suspect that the JG524 does not have spanning tree support. Now I have a Dell R710 with 2 NIC at the back. If I connect the server in between the two JGS524, which both in turn connect to the GS748T, will that consitute a loop? According to my limited understanding, with 2 NICs there will be 2 IPs for the server. Will the file server even work or not? Theoretically speaking, will this configuration increase the access speeds for clients? Thanks.

  Read the article

• Sudden loss of Wi-Fi connectivity on OS X

  - by GJ.

  Occasionally while I work, without any special provocation, I lose connectivity via Wi-Fi. Other devices connected to the same wifi network have no interruption, and the problem gets resolved once I reboot my MacBook Air, so it's definitely a local problem. Observations: The Wi-Fi symbol in the menu indicates that I'm still connected, but apps can't actually connect neither to the Internet nor to other devices in the LAN. I can't connect to an alternate Wi-Fi network (e.g. Wi-Fi tethering via iPhone). I can connect to the Internet via iPhone USB tethering but this seems to only work some of the time. Only a reboot solves the problem but a regular restart gets stuck on a grey screen with rotating wheel (after all applications have closed) and I have to do a hard reset. How should I go about troubleshooting this? It used to happen very rarely but now is becoming more frequent (approaching once every 2-3 days on average).

  Read the article

• How to access remotly to a mysql server?

  - by ÉricP

  Hi, I'm trying to access my remote mysql server from my own computer. I uncommented: bind-address = 80.10.65.45 I added 80.10.65.45 as a server in privilege root 80.10.65.45 yes ALL PRIVILEGES yes I'm using Sequel Pro on MacosX to connect via SSH here is the debug log: debug1: Authentication succeeded (password). debug1: Local connections to LOCALHOST:58517 forwarded to remote address 127.0.0.1:3306 debug1: Local forwarding listening on ::1 port 58517. debug1: channel 0: new [port listener] debug1: Local forwarding listening on 127.0.0.1 port 58517. debug1: channel 1: new [port listener] debug1: Entering interactive session. debug1: Connection to port 58517 forwarding to 127.0.0.1 port 3306 requested. debug1: channel 2: new [direct-tcpip] channel 2: open failed: connect failed: Connection refused debug1: channel 2: free: direct-tcpip: listening port 58517 for 127.0.0.1 port 3306, connect from 127.0.0.1 port 58519, nchannels 3

  Read the article

• Linksys Wireless-N ADSL2 WAG160N losing connection

  - by Sam1973

  It seems that recently I have to turn off and then turn on my router every time I want to connect my laptop(s) to the internet. This is what's happens: When I want to connect to the internet on my laptop, the network icon in the system tray states that I am connected to the wireless network but there's no "internet connectivity" I turn off the router and turn it back on and then I can connect to the internet. I am sure there is something that needs to be done. Can you guys point me to the right direction?

  Read the article

• Why does my Mac address reset after reconnecting?

  - by Mr.Student

  I have ubuntu 12. I'm changing my mac address with ifconfig wlan0 hw ether xx:xx:xx:xx:xx:xx which works. However when I restart my connection my computer resets my mac to my original mac address. I'm guessing that this happens because something calls... ifconfig wlan0 down ... do something before connecting ifconfig wlan0 up ... connect to designated access point I want my mac address to however be the same no matter how many times I disconnect and reconnect, whether to another network or the same one. Also it would be nice to turn off the auto-connect feature for my network-manager with out having to edit each individual connection. Lastly I would like to know how to connect to a wifi network through the terminal and not via gui network manager ubuntu provides.

  Read the article

• SSH connection falling down

  - by kappa

  I've set up a connection with autossh that creates some tunnels at system startup, but if I try to connect, after successful login (with RSA key) connection fall down, here a trace: debug1: Authentication succeeded (publickey). debug1: Remote connections from LOCALHOST:5006 forwarded to local address localhost:22 debug1: Remote connections from LOCALHOST:6006 forwarded to local address localhost:80 debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: remote forward success for: listen 5006, connect localhost:22 debug1: remote forward success for: listen 6006, connect localhost:80 debug1: All remote forwarding requests processed debug1: Sending environment. debug1: Sending env LANG = it_IT.UTF-8 debug1: Sending env LC_CTYPE = en_US.UTF-8 debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: client_input_channel_req: channel 0 rtype [email protected] reply 0 debug1: channel 0: free: client-session, nchannels 1 Transferred: sent 2400, received 2312 bytes, in 1.3 seconds Bytes per second: sent 1904.2, received 1834.4 debug1: Exit status 1 What can be the problem? All this stuff is managed by a script already running on another machine (creating reverse tunnels on the same machine but with different ports)

  Read the article

• Auto login CISCO VPN client on linux [closed]

  - by user70704

  Hi, I have installed Cisco vpn client on my linux system (Fedora core 8). After login, every time, i need to run the following command VPNC to connect the VPN server. VPNC command request the input data from the user, IPSec gateway : IPSec ID: IPSec Secret: Username: Password: So, my requirement is, can i connect the VPN server through any single command?. I feel so lazy to enter the above requirements at every time. I want to connect the VPN Server on boot startup. I was try using expect script, but i can't. Thanks in advance.

  Read the article

• Problem with PPTP VPN and internet

  - by Enriquev

  Hello, I have an internet connection the following way : Internet Modem <- FireWall(not a router, a firewall) <- PC Everything is setup so my pc has an external ip address, and my firewall takes care of blocking bad stuff. I connect by VPN to an external network, so I added a new connection using Windows Xp's "New connection wizard" (the vpn client that comes with Windows XP), it's a PPTP connection so I used all default settings. I put the PPTP server's IP, my username and password and I succesfully connected. I was able to have access to the external VPN ressources. The only problem is everytime I connect to this VPN, my computer cannot connect to the web anymore, no msn, no ping, no web. Is there anything special I should be doing?

  Read the article

• Cisco Router 1921

  - by mytempfw

  I'm very new in networking and I'm trying to setup my network as follow [ISP Modem/Router/Switch] + --- + {fxp0} [Linux Firewall] {fxp1} + --- + {??} [Cisco Router 1921] {GE 0/0} + --- + [Cisco Switch] + ... Servers {GE 0/1} + --- + [Cisco Switch] + ... Servers My questions are, Since I'm using both GE 0/0 and GE 0/1 ports to connect to switch, how can I connect my Linux Firewall (Port fxp1) to my Cisco Router? I know the USB and Console port are for configuration, can I use AUX port to connect my firewall (if so is it consider a right way)? Is my setup is right? if not can someone please explain to me to do the setup in right way. Link to the picture of my router: Cisco Router 1921 Thanks

  Read the article

• USB connection issue

  - by user1664417

  Currently Im facing an issue when Im trying to connect any usb flash drive to my pc. ok, below is what happens to me: 1) I can connect usb keyboard and mouse without any issue. 2) however when i connect usb flash drive, there are 2 situations that are occuring randomly a) there is no usb drive mount in my computer, when device manager is checked, it shows error code 10, but is shown in disk management. b) my computer will have usb drive mounted, but when I click on it, it is empty. on right click the properties, the disk space show 0. (there are files within the usb) what i have done is: 1) run CCleaner to repair the registry, restart and try, but still not working. 2) uninstall the drive in device manager, restart and try, but still not working. 3) tried the port that connects mouse and keyboard, but does not work. anyone who experienced these problems before please guide me. any suggestions or solutions would be greatly appreciated. Thanks, Tony

  Read the article

• ServerName no longer works as SQL Server 2008 Default instance name?

  - by TomK

  Folks, Somehow in struggling to install something (Sage MIP), I have unsettled my system's SQL Server 2008 instance names. If I fired up SSMS and connected to "MySystemName" (while logged into MySystemName), I used to immediately connect and could view my databases. Now if I connect to "(local)" or "." I connect just fine...but "MySystemName" gives me a timeout error. If I log in with "." and do "SELECT @@SERVERNAME" it comes back with "MySystemName" just fine. I've double checked that my network name is in the Security\Logins list, and it is, as a dbadmin. Any suggestions? I thought that having SQL Server 2005 Express might be a problem (the "battle of the default instances"), so I uninstalled that. No better.

  Read the article

< Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >