Search Results

Search found 16127 results on 646 pages for 'physical model'.

Page 123/646 | < Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >

• Recover RAID 5 data after created new array instead of re-using

  - by Brigadieren

  Folks please help - I am a newb with a major headache at hand (perfect storm situation). I have a 3 1tb hdd on my ubuntu 11.04 configured as software raid 5. The data had been copied weekly onto another separate off the computer hard drive until that completely failed and was thrown away. A few days back we had a power outage and after rebooting my box wouldn't mount the raid. In my infinite wisdom I entered mdadm --create -f... command instead of mdadm --assemble and didn't notice the travesty that I had done until after. It started the array degraded and proceeded with building and syncing it which took ~10 hours. After I was back I saw that that the array is successfully up and running but the raid is not I mean the individual drives are partitioned (partition type f8 ) but the md0 device is not. Realizing in horror what I have done I am trying to find some solutions. I just pray that --create didn't overwrite entire content of the hard driver. Could someone PLEASE help me out with this - the data that's on the drive is very important and unique ~10 years of photos, docs, etc. Is it possible that by specifying the participating hard drives in wrong order can make mdadm overwrite them? when I do mdadm --examine --scan I get something like ARRAY /dev/md/0 metadata=1.2 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b name=<hostname>:0 Interestingly enough name used to be 'raid' and not the host hame with :0 appended. Here is the 'sanitized' config entries: DEVICE /dev/sdf1 /dev/sde1 /dev/sdd1 CREATE owner=root group=disk mode=0660 auto=yes HOMEHOST <system> MAILADDR root ARRAY /dev/md0 metadata=1.2 name=tanserv:0 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b Here is the output from mdstat cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdd1[0] sdf1[3] sde1[1] 1953517568 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU] unused devices: <none> fdisk shows the following: fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bf62e Device Boot Start End Blocks Id System /dev/sda1 * 1 9443 75846656 83 Linux /dev/sda2 9443 9730 2301953 5 Extended /dev/sda5 9443 9730 2301952 82 Linux swap / Solaris Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de8dd Device Boot Start End Blocks Id System /dev/sdb1 1 91201 732572001 8e Linux LVM Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00056a17 Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 8e Linux LVM Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ca948 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/dm-0: 1250.3 GB, 1250254913536 bytes 255 heads, 63 sectors/track, 152001 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-0 doesn't contain a valid partition table Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x93a66687 Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe6edc059 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/md0: 2000.4 GB, 2000401989632 bytes 2 heads, 4 sectors/track, 488379392 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 524288 bytes / 1048576 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Per suggestions I did clean up the superblocks and re-created the array with --assume-clean option but with no luck at all. Is there any tool that will help me to revive at least some of the data? Can someone tell me what and how the mdadm --create does when syncs to destroy the data so I can write a tool to un-do whatever was done? After the re-creating of the raid I run fsck.ext4 /dev/md0 and here is the output root@tanserv:/etc/mdadm# fsck.ext4 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Superblock invalid, trying backup blocks... fsck.ext4: Bad magic number in super-block while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 Per Shanes' suggestion I tried root@tanserv:/home/mushegh# mkfs.ext4 -n /dev/md0 mke2fs 1.41.14 (22-Dec-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=128 blocks, Stripe width=256 blocks 122101760 inodes, 488379392 blocks 24418969 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 14905 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 and run fsck.ext4 with every backup block but all returned the following: root@tanserv:/home/mushegh# fsck.ext4 -b 214990848 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Invalid argument while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Any suggestions? Regards!

  Read the article

• Remotely managing Hyper-V VMs from Windows 8 Client

  - by Vazgen

  Currently, I have a core Hyper-V Server hosting VMs for a domain controller and several domain-joined VDI infrastructure servers. The VMs are connected in that domain environment, but the remote management of the physical Hyper-V Server is set up using the same WORKGROUP (as the Windows 8 client I'm managing from) This makes it cumbersome to manage the VMs hosted on the physical server from my remote management Windows 8 client because I can only connect to the physical Hyper-V server and not the individual VMs hosted inside. Can I make my set up more flexible by hosting a second domain controller in a VM hosted on my Windows 8 machine and switching my remote management set up to use the same domain through? Meaning ALL physical and virtual machines including the VDI infrastructure under the same domain? I'm new to this just looking for some suggestions.

  Read the article

• MySQL-problem when baking with CakePHP.

  - by timkl

  I am currently reading "Beginning CakePHP:From Novice to Professional" by David Golding. At one point I have to use the CLI-command "cake bake", I get the welcome-screen but when I try to bake e.g. a Controller I get the following error messages: Warning: mysql_connect(): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) in /Applications/MAMP/htdocs/blog/cake/libs/model/datasources/dbo/dbo_mysql.php on line 117 Warning: mysql_select_db(): supplied argument is not a valid MySQL-Link resource in /Applications/MAMP/htdocs/blog/cake/libs/model/datasources/dbo/dbo_mysql.php on line 122 Warning: mysql_get_server_info(): supplied argument is not a valid MySQL-Link resource in /Applications/MAMP/htdocs/blog/cake/libs/model/datasources/dbo/dbo_mysql.php on line 130 Warning: mysql_query(): supplied argument is not a valid MySQL-Link resource in /Applications/MAMP/htdocs/blog/cake/libs/model/datasources/dbo/dbo_mysql.php on line 154 Error: Your database does not have any tables. I suspect that the error-messages has to do with php trying to access the wrong mysql-socket, namely the default osx mysql-socket - instead of the one that MAMP uses. Hence I change my database configurations to connect to the UNIX mysql-socket (:/Applications/MAMP/tmp/mysql/mysql.sock): class DATABASE_CONFIG { var $default = array( 'driver' => 'mysql', 'connect' => 'mysql_connect', 'persistent' => false, 'host' =>':/Applications/MAMP/tmp/mysql/mysql.sock', // UNIX MySQL-socket 'login' => 'my_user', 'password' => 'my_pass', 'database' => 'blog', 'prefix' => '', ); } But I get the same error-messages with the new socket: Warning: mysql_connect(): Can't connect to local MySQL server through socket '/Applications/MAMP/tmp/mysql/mysql.sock:3306' (2) in /Applications/MAMP/htdocs/blog/cake/libs/model/datasources/dbo/dbo_mysql.php on line 117 Warning: mysql_select_db(): supplied argument is not a valid MySQL-Link resource in /Applications/MAMP/htdocs/blog/cake/libs/model/datasources/dbo/dbo_mysql.php on line 122 Warning: mysql_get_server_info(): supplied argument is not a valid MySQL-Link resource in /Applications/MAMP/htdocs/blog/cake/libs/model/datasources/dbo/dbo_mysql.php on line 130 Warning: mysql_query(): supplied argument is not a valid MySQL-Link resource in /Applications/MAMP/htdocs/blog/cake/libs/model/datasources/dbo/dbo_mysql.php on line 154 Error: Your database does not have any tables. Also, even though I use the UNIX-socket that MAMP show on it's welcome-screen, CakePHP loses the database-connection, when using this socket instead of localhost. Any ideas on how I can get bake to work?

  Read the article

• Is this a good KVO-compliant way to model a mutable to-many relationship?

  - by andyvn22

  Say I'd like a mutable, unordered to-many relationship. For internal optimization reasons, it'd be best to store this in an NSMutableDictionary rather than an NSMutableSet. But I'd like to keep that implementation detail private. I'd also like to provide some KVO-compliant accessors, so: - (NSSet*)things; - (NSUInteger)countOfThings; - (void)addThings:(NSSet*)someThings; - (void)removeThings:(NSSet*)someThings; Now, it'd be convenient and less evil to provide accessors (private ones, of course, in my implementation file) for the dictionary as well, so: @interface MYClassWithThings () @property (retain) NSMutableDictionary* keyedThings; @end This seems good to me! I can use accessors to mess with my keyedThings within the class, but other objects think they're dealing with a mutable, unordered (, unkeyed!) to-many relationship. I'm concerned that several things I'm doing may be "evil" though, according to good style and Apple approval and whatnot. Have I done anything evil here? (For example, is it wrong not to provide setThings, since the things property is supposedly mutable?)

  Read the article

• MVC2 Clientside Validation and duplicate ID's problem

  - by Dusty Roberts

  I'm using MVC2 with VS2010 I have a view that has two partial views in it: "Login" and "Register" both partial views contains the Email address field i use the following in both partial views: <%: Html.TextBoxFor(model => model.EmailAddress ) %><br /><%: Html.ValidationMessageFor(model => model.EmailAddress) %> if i use both partial views on one page, it ends up having duplicate id's so validation happens across both views (even thopugh they are in seperate forms) how can i go about eliminating this

  Read the article

• What are the most important aspects to consider when choosing a SAN for a small office virtualizatio

  - by Prof. Moriarty

  I am in the process of consolidating 6 physical servers running 6 different operating system flavors (don't ask) into two identical physical servers (Dell PowerEdge 2900), using the free VMware ESXi 4.0 platform. We will install an iSCSI SAN over a 1GbE network, and store all virtual machine images on the SAN. Each physical server would run 3 VMs, and in the case of a physical server failure, we would manually switch over the other 3. These are all internal servers, while important, they can tolerate some amount of downtime (say <1h) to keep cost and complexity associated with HA down. I now need to choose the SAN to be used for the setup, on a low budget. We currently have about 2TB of data, but of course I want to able to grow, do backups of VM snapshots on other drives and remove them to a different location, etc. So what I would like to know is: Which are the must have features for this setup, without which using a SAN is not worth it? We are mostly a Dell shop, so I have been looking at the EqualLogic PS4000E High Availability model. Any opinions, anecdotes, bad experiences with this model? (This is one of the few models which could accomodate our existing disks from the physical servers.) If you can recommend something that is not Dell, but it has better value, I would most definitely consider it. Caveats, things to look out for?

  Read the article

• Rails - why would a model inside RAILS_ROOT/lib not be available in production mode?

  - by sa125

  Hi - I have a class located inside RAILS_ROOT/lib folder, which I use in one of my helpers, and it works great in development. When I switch to production, the application throws a NameError (uninitialized constant SomeHelper::SomeClass), and I have to load it manually in the helper: load "#{Rails.root}/lib/some_class.rb" module SomeHelper def some_method sc = SomeClass.new # blah end end I was under the impression that everything inside RAILS_ROOT/lib/* should be available all to the app - is there anything I need to configure to make this happen in prod mode? thanks.

  Read the article

• Error starting Hyper-V VM

  - by Peter Bernier

  I'm trying to start a VM on a new Hyper-V installation and I'm receiving the following error: The virtual machine could not be started because the hypervisor is not running. The following actions may help you resolve the problem: 1) Verify that the processor of the physical computer has a supported version of hardware-assisted virtualization. 2) Verify that hardware-assisted virtualization and hardware-assisted data execution protection are enabled in the BIOS of the physical computer. (If you edit the BIOS to enable either setting, you must turn off the power to the physical computer and then turn it back on. Resetting the physical computer is not sufficient.) 3) If you have made changes to the Boot Configuration Data store, review these changes to ensure that the hypervisor is configured to launch automatically. My machine supports virtualization at the hardware level and it is enabled in BIOS. Why am I receiving this error?

  Read the article

• php , SimpleXML, while loop

  - by Michael

  I'm trying to get some information from ebay api and store it in database . I used simple xml to extract the information but I have a small issue as the information is not displayed for some items . if I make a print to the simple_xml I can see very well that the information is provided by ebay api . I have $items = "220617293997,250645537939,230485306218,110537213815,180519294810"; $number_of_items = count(explode(",", $items)); $xml = $baseClass->getContent("http://open.api.ebay.com/shopping?callname=GetMultipleItems&responseencoding=XML&appid=Morcovar-c74b-47c0-954f-463afb69a4b3&siteid=0&version=525&IncludeSelector=ItemSpecifics&ItemID=$items"); writeDoc($xml, "api.xml"); //echo $xml; $getvalues = simplexml_load_file('api.xml'); // print_r($getvalue); $number = "0"; while($number < 6) { $item_number = $getvalues->Item[$number]->ItemID; $location = $getvalues->Item[$number]->Location; $title = $getvalues->Item[$number]->Title; $price = $getvalues->Item[$number]->ConvertedCurrentPrice; $manufacturer = $getvalues->Item[$number]->ItemSpecifics->NameValueList[3]->Value; $model = $getvalues->Item[$number]->ItemSpecifics->NameValueList[4]->Value; $mileage = $getvalues->Item[$number]->ItemSpecifics->NameValueList[5]->Value; echo "item number = $item_number <br>localtion = $location<br>". "title = $title<br>price = $price<br>manufacturer = $manufacturer". "<br>model = $model<br>mileage = $mileage<br>"; $number++; } the above code returns item number = localtion = title = price = manufacturer = model = mileage = item number = 230485306218 localtion = Coventry, Warwickshire title = 2001 LAND ROVER RANGE ROVER VOGUE AUTO GREEN price = 3635.07 manufacturer = Land Rover model = Range Rover mileage = 76000 item number = 220617293997 localtion = Crawley, West Sussex title = 2004 CITROEN C5 HDI LX RED price = 3115.77 manufacturer = Citroen model = C5 mileage = 76000 item number = 180519294810 localtion = London, London title = 2000 VOLKSWAGEN POLO 1.4 SILVER 16V NEED GEAR BOX price = 905.06 manufacturer = Right-hand drive model = mileage = Standard Car item number = localtion = title = price = manufacturer = model = mileage = As you can see the information is not retrieved for a few items ... If I replace the $number manually like " $item_number = $getvalues-Item[4]-ItemID;" works well for any number .

  Read the article

• Monkeypatch a model in a rake task to use a method provided by a plugin?

  - by gduquesnay.mp

  During some recent refactoring we changed how our user avatars are stored not realizing that once deployed it would affect all the existing users. So now I'm trying to write a rake task to fix this by doing something like this. namespace :fix do desc "Create associated ImageAttachment using data in the Users photo fields" task :user_avatars => :environment do class User # Paperclip has_attached_file :photo ... <paperclip stuff, styles etc> end User.all.each do |user| i = ImageAttachment.new i.photo_url = user.photo.url user.image_attachments << i end end end When I try running that though I'm getting undefined method `has_attached_file' for User:Class I'm able to do this in script/console but it seems like it can't find the paperclip plugin's methods from a rake task.

  Read the article

• Is it okay to hit the database from a custom model binder?

  - by Byron Sommardahl

  Say I have an object that gets some data from HttpPost and some from the database. I think I want to allow the ModelBinder to go to the database/repository for the that data missing from the post. In practice, is this a good or bad idea?

  Read the article

• How do I create an app to find the User name and put an image model and publish it directly on the wall?

  - by Thony Henrique Mendes

  Good researching to come here on the site that has several script modes more SUBE not fit everything in one part only. The where to get the junta to leave but I think he ta with error'm not sure I'm not a programmer I know only the basics can someone help me? My idea is to create an app that publishes the Wall more people with the name of her ex: Thony Henry The meaning of your name is ex to using the tag image to give an example wanted the name of the person foce written or published emcima image, do not know how I just know to give to. Can anyone help? Thank you!

  Read the article

• how to make Sliding window model for data stream mining?

  - by zeedotcom

  we have a situation that a stream (data from sensor or click stream data at server) is coming with sliding window algorithm we have to store the last (say) 500 samples of data in memory. These samples are then used to create histograms, aggregations & capture information about anomalies in the input data stream. please tell me how to make such sliding window.

  Read the article

• How do I list all classes of a given type in a python file?

  - by Hobhouse

  I use django, and have a lengthy models.py file. class Foo(models.Model): name = models.CharField() class Bar(models.Model): name = models.CharField() class Fab(models.Model): name = models.CharField() Is there a way to make a list of all the classes in the file which are an instance of (models.Model)?

  Read the article

• How should Application.Run() be called for the main presenter of a MVP WinForms app?

  - by Mr Roys

  I'm learning to apply MVP to a simple WinForms app (only one form) in C# and encountered an issue while creating the main presenter in static void Main(). Is it a good idea to expose a View from the Presenter in order to supply it as a parameter to Application.Run()? Currently, I've implemented an approach which allows me to not expose the View as a property of Presenter: static void Main() { IView view = new View(); Model model = new Model(); Presenter presenter = new Presenter(view, model); presenter.Start(); Application.Run(); } The Start and Stop methods in Presenter: public void Start() { view.Start(); } public void Stop() { view.Stop(); } The Start and Stop methods in View (a Windows Form): public void Start() { this.Show(); } public void Stop() { // only way to close a message loop called // via Application.Run(); without a Form parameter Application.Exit(); } The Application.Exit() call seems like an inelegant way to close the Form (and the application). The other alternative would be to expose the View as a public property of the Presenter in order to call Application.Run() with a Form parameter. static void Main() { IView view = new View(); Model model = new Model(); Presenter presenter = new Presenter(view, model); Application.Run(presenter.View); } The Start and Stop methods in Presenter remain the same. An additional property is added to return the View as a Form: public void Start() { view.Start(); } public void Stop() { view.Stop(); } // New property to return view as a Form for Application.Run(Form form); public System.Windows.Form View { get { return view as Form(); } } The Start and Stop methods in View (a Windows Form) would then be written as below: public void Start() { this.Show(); } public void Stop() { this.Close(); } Could anyone suggest which is the better approach and why? Or there even better ways to resolve this issue?

  Read the article

• How stable are Cisco IOS OIDs for querying data with SNMP across different model devices?

  - by Daniel Papasian

  I'm querying a bunch of information from cisco switches using SNMP. For instance, I'm pulling information on neighbors detected using CDP by doing an snmpwalk on .1.3.6.1.4.1.9.9.23 Can I use this OID across different cisco models? What pitfalls should I be aware of? To me, I'm a little uneasy about using numeric OIDs - it seems like I should be using a MIB database or something and using the named OIDs, in order to gain cross-device compatibility, but perhaps I'm just imagining the need for that.

  Read the article

• How do I collapse all entities to just headers when editing an Entity Framework EDMX model in Visual

  - by Ivan

  Each block representing an entity has an icon to collapse it to its header (hiding all properties from the diagram) in the header's right-top corner. How do I collapse them all without clicking each one manually?

  Read the article

• Is the first persistance of an Entity Data Model in EF 4.0 slower due to the connection cost ?

  - by Scott Davies

  Hi, I've got a console app written that persists an object graph via Entity Framework 4.0. I loop through this to dump the execution times for each persistance. The first persistance is always the largest. Is this due to EF making the initial connection to the database and/or JIT'ing ? Here's a sample of the output: Persisted graph in **3318** millseconds. Persisted graph in 25 millseconds. Persisted graph in 26 millseconds. Persisted graph in 22 millseconds. Thanks, Scott

  Read the article

• Virtual drivers with Windows Driver Model - where to begin?

  - by waitinforatrain

  I've never written drivers before but I'm starting an open-source project that involves creating virtual MIDI ports that will send the MIDI data over a network. For this, I presume I would be creating some sort of virtual driver using WDM (unless it's possible with kernel hooks?) - but being a beginner to driver development I don't know where to begin. Does anyone know any useful resources that would help me with this project? Or some open-source code from a similar project that I could fork as a starting point?

  Read the article

• Is it a good idea to "migrate business logic code into our domain model"?

  - by Bytecode Ninja

  I am reading Hibernate in Action and the author suggests to move business logic into our domain models (p. 306). For instance, in the example presented by the book, we have three entities named Item, Bid, and User and the author suggests to add a placeBid(User bidder, BigDecimal amount) method to the Item class. Considering that usually we have a distinct layer for business logic (e.g. Manager or Service classes in Spring) that among other things control transactions, etc. is this really a good advice? Isn't it better not to add business logic methods to our entities? Thanks in advance.

  Read the article

• ASP.NET MVC Newbie: why isn't my model available when creating a strongly-typed view?

  - by Rax Olgud

  I'm starting with ASP.NET MVC, and working with NerdDinner as reference. I did the following: Created a new project Added a couple of tables Created LINQ to SQL for them Created a new controller My Models directory now contains MyModel.dbml, under which I have MyModel.designer.cs, that contains classes for models relating to both of my tables (let's call them Categories and Products). Now, under my new controller, I would like to create a strongly typed view. So for example I have the following code in my controller (for my application I must work by name, and the "Name" field is unique): public ActionResult Details(string name) { MyModelDataContext db = new MyModelDataContext(); Product user = db.Products.Single(t => t.Name == name); return View(user); } I would like to create a strongly-typed view. So I right-click the line "return View(user)", and choose "Add View...". I click "Create a strongly-typed view". When I click the dropdown of "View data class", I don't see my models, but only: MyProject.Controllers.AccountMembershipService MyProject.Controllers.FormsAuthenticationService What am I missing?

  Read the article

• Loading data in constructors and not in constructors [JAVA]

  - by Richeve S. Bebedor

  i just want to know the difference between loading the data inside the constructor and loading the data outside the constructor but not inside any methods example: Loading inside constructor public class Model{ Object testobject; public Model(){ testobject=new Object(); } } VS example: Loading outside constructor public class Model{ Object testobject=new Object(); public Model(){ } }

  Read the article

• Does SQLIO lie when run from a Hyper-V guest on a VHD?

  - by ScottStonehouse

  SQLIO seems like a useful tool. I thought it would be interesting to try to measure the speed difference between a physical disk and a VHD. So I ran SQLIO on the Hyper-V host on the physical drive. Results seemed reasonable. Then I ran it from the guest to test the vhd (on the same physical disk). I expected it to be a bit slower. But instead it was way faster - like 0ms average latency. So I'm trying to learn something here. It seems like hyper-v is fooling SQLIO somehow but I don't understand it well enough to figure it out. It's a dynamic vhd, no snapshots or anything, and the vhd is the only file on the disk. The physical disk is actually a two SAS drive RAID 1.

  Read the article

• In Google's Protocol Buffers, what is a suitable protocol file/model for Exceptions?

  - by saidimu

  Protocol Buffers doesn't have a native Exception type. What would a suitable .proto file for cross-language exceptions look like?

  Read the article

• How can I handle dynamic calculated attributes in a model in Django?

  - by bullfish

  In Django I calculate the breadcrumb (a list of fathers) for an geographical object. Since it is not going to change very often, I am thinking of pre calculating it once the object is saved or initialized. 1.) What would be better? Which solution would have a better performance? To calculate it at _init_ or to calculate it when the object is saved (the object takes about 500-2000 characters in the DB)? 2.) I tried to overwrite the _init_ or save() methods but I don't know how to use attributes of the just saved object. Accessing *args, **kwargs did not work. How can I access them? Do I have to save, access the father and then save again? 3.) If I decide to save the breadcrumb. Whats the best way to do it? I used http://www.djangosnippets.org/snippets/1694/ and have crumb = PickledObjectField(). Thats the method to calculate the attribute crumb() def _breadcrumb(self): breadcrumb = [ ] x = self while True: x = x.father try: if hasattr(x, 'country'): breadcrumb.append(x.country) elif hasattr(x, 'region'): breadcrumb.append(x.region) elif hasattr(x, 'city'): breadcrumb.append(x.city) else: break except: break breadcrumb.reverse() return breadcrumb Thats my save-Method: def save(self,*args, **kwargs): # how can I access the father ob the object? father = self.father # does obviously not work father = kwargs['father'] # does not work either # the breadcrumb gets calculated here self.crumb = self._breadcrumb(father) super(GeoObject, self).save(*args,**kwargs) Please help me out. I am working on this for days now. Thank you.

  Read the article

< Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >