Search Results

Search found 25418 results on 1017 pages for 'back ache'.

Page 124/1017 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

  • Data Recovery needed with a Sector Zero problem on a HDD

    - by Jay Robins
    Left my computer (running XP) copying files to an external drive. Came back a few hours later, and the laptop was pretty hot and had frozen (Ironic aint it). Forced a reboot, and the laptop HDD hasnt worked since. Set it up in an external enclosure, but XP cant mount the HDD to a drive letter, but is able to recognize the manufacturer and drive size (Hitachi-320GB). No noise or rattling when the drive is spinning, but I cant get anything off of it, since i cant mount it, or see much of anything. Computer repair shop ran some software tests and says it came back with a "Zero Sector bad" message, and need to send it to a professional data recovery service. Any other options or ideas, before I have to spend thousands of dollars to recover my data? Any help would be GREATLY appreciated!!! I'm desperate and a poor student! Thanks in Advance, -Jay

    Read the article

  • I just moved, have no internet on my laptop or ipod, but everyone else who lives here does

    - by Kay
    I just moved to Thunder Bay and my laptop as well as my ipod cannot connect to the internet. My laptop allows me to write the password for the wifi, but I still have no internet connection. When I try to use the cable, the computer tells me I have a perfect connection, even the icon shows that it's working, but I can't open any web pages or use any internet functions. When I try to use MSN it sends me to a troubleshooting option and informs me that there's some kind of problem with the "gateway". I have unplugged the modem and the router and plugged them back in, this did not help. I am living in a home where all the people are using wifi on the same system as me, and no one has ever had any problems. Back home both my laptop and my ipod worked without a problem both in my home, as well as on campus. Since this problem seems to be limited only to me, it would indicate that there's a problem on my end -- with my laptop. However, in that case my ipod would be working. It has never failed to connect before. Any suggestions would be much appreciated.

    Read the article

  • Best way to use GIT to maintain web application template

    - by Darren
    I am a sole developer and I have a web application template that I have created in Visual Studio. I am using GIT for source control, but only on my development machine. Presently I have a master and I create branches for new features, merging them back in to the master as I complete the features. I am at a point now where I am ready to use the template for deployments, and of course I want to continue adding new features via branching/merging. My question is: what would be the typical/recommended way for me to create application deployments based on the master? Should I clone the repository into a new directory that is for a particular web application? Or should I also use branching to do project development based on the main project? The projects would never be merged back into the master. However, it would be nice if I could merge future features into the master and have the ability to incorporate them into previously completed projects if desired. For more specific details of my environment: I am using TortoiseGIT in Windows 7, Visual Studio 2012, ASP.NET Web Pages. Obviously the main differences between deployments would simply be differing pages, CSS files and jQuery scripts. I found this post as I was writing this one. In order to do this should I clone the master repository and checkout from it?

    Read the article

  • How do I properly use String literals for loading content?

    - by Dave Voyles
    I've been using verbatim string literals for some time now, and never quite thought about using a regular string literal until I started to come across them in Microsoft provided XNA samples. With that said, I'm trying to implement a new AudioManager class from the Net Rumble sample. I have two (2) issues here: Question 1: In my code for my GameplayScreen screen I have a folder location written as the following, and it works fine: menuButton = content.Load<SoundEffect>(@"sfx/menuButton"); menuClose = content.Load<SoundEffect>(@"sfx/menuClose"); If you notice, you'll see that I'm using a verbatim string, with a forward slash "/". In the AudioManager class, they use a regular string literal, but with two backslashes "\". I understand that one is used as an escape, but why are they BACK instead of FORWARD? (See below) soundList[soundName] = game.Content.Load<SoundEffect>("audio\\wav\\"+ soundName); Question 2: I seem to be doing everything correctly in my AudioManager class, but I'm not sure of what this line means: audioFileList = audioFolder.GetFiles("*.xnb"); I suppose that the *xnb means look for everything BUT files that end in *xnb? I can't figure out what I'm doing wrong with my file locations, as the sound effects are not playing. My code is not much different from what I've linked to above. private AudioManager(Game game, DirectoryInfo audioDirectory) : base(game) { try { audioFolder = audioDirectory; audioFileList = audioFolder.GetFiles("*.mp3"); soundList = new Dictionary<string, SoundEffect>(); for (int i = 0; i < audioFileList.Length; i++) { string soundName = Path.GetFileNameWithoutExtension(audioFileList[i].Name); soundList[soundName] = game.Content.Load<SoundEffect>(@"sfx\" + soundName); soundList[soundName].Name = soundName; } // Plays this track while the GameplayScreen is active soundtrack = game.Content.Load<Song>("boomer"); } catch (NoAudioHardwareException) { // silently fall back to silence } }

    Read the article

  • Power supply surges detected during previous power on

    - by Blastcore
    Message is this: "Power supply surges detected during previous power on" "ASUS Auto-Surge was triggered to protect system from unstable power supply" When i went to sleep yesterday and woke up, when i moved the mouse to go back from screen saver, it didn't do anything. So i left it, i came back from class and got this issue. (I didn't restart before going to class... So the screen was left like it was) Today there was a power cut in half of my house. (Computer is on the side that it didn't cut...) Voltages are fine, like always. How do i remove message? It's just maybe sensor glitch? Even disabling the Anti-Surge my PC "shuts down" (Only monitor, but maybe components do too.)

    Read the article

  • Ask the Readers: Do You Use the Command Line?

    - by Jason Fitzpatrick
    Despite over two decades of GUI interfaces many power users still turn to the command prompt. This week we want to hear about when and how you use the command prompt on your computer. Long ago in a time before you could manipulate your computer with a mouse and a series of buttons and windows, the command line ruled all. Even after years of GUI development and refinement many people still turn to the command line to get things done. This week we want to hear all about your command line tips and tricks. Do you use the default command line for your OS? Have you enhanced it? Replaced it? What keeps you coming back to the command line when everyone happily works away in the OS’s GUI? Sound off in the comments and don’t forget to check back in on Friday to see the What You Said roundup. What is a Histogram, and How Can I Use it to Improve My Photos?How To Easily Access Your Home Network From Anywhere With DDNSHow To Recover After Your Email Password Is Compromised

    Read the article

  • Displaying the Saved Pictures in the Windows Phone 8 emulator

    - by Laurent Bugnion
    One cool feature of the Windows Phone emulator is that it allows you to select pictures from your app (using the PhotoChooserTask) without having to try your app on a physical device. For example, this code (which I used in some of my recent presentations) will trigger the Photo Chooser UI to be displayed on the emulator too: private Action<IEnumerable<IImageFileInfo>> _callback; public void SelectFiles(Action<IEnumerable<IImageFileInfo>> callback) { var task = new PhotoChooserTask { ShowCamera = true }; task.Completed += TaskCompleted; _callback = callback; task.Show(); } void TaskCompleted(object sender, PhotoResult e) { if (e.Error == null && e.ChosenPhoto != null && _callback != null) { var fileName = e.OriginalFileName .Substring(e.OriginalFileName.LastIndexOf("\\") + 1); var info = new FileViewModel(e.ChosenPhoto, fileName); var infos = new List<IImageFileInfo> { info }; _callback(infos); } } In Windows Phone 8 however, when you execute this code, you will be shown an almost empty Photo Chooser UI: Notice that the “Saved Pictures” album is missing. At first I thought it was just not there at all, but you can actually restore it with the following steps: Press on the Windows button On the main screen, press on Photos Press on Albums Open the so called “8” photo album Press Back until you are back into your app and try again. This time you will see the saved pictures, and can perform your tests in more realistic conditions! Happy coding! Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

    Read the article

  • Frequent grub rescue error: unknown filesystem

    - by user3215
    It's really frustrating. Three week's back story: I faced the following error on ubuntu 10.04 LTS Desktop, error : unknown filesystem grub rescue> I tried many solutions online apart from 1 and 2 and eventually I could not boot my system at all. Trying those solutions could not completely fix it and then I had to face initramfs(could not remember exact error). As I could not fix, a week back I did a fresh install of Ubuntu 12.04 Desktop and after a week i.e, now, I got the same grub rescue> error. Could anybody tell me what's the reason behind this error?. Is there any problem with the Ubuntu or it's a problem at my side due to some reason?. My machine description: I have two hard disks, windows is installed on one hard disk and on another it's Ubuntu. I installed the operating systems(vista, ubuntu) such a way one is not known to another, I mean to say, I'll unplug one hard disk and install the Ubuntu and similarly I'll unplug the ubuntu hard disk, installed the vista on another hard disk, generally I do(I actually don't want to run into grub/boot.ini issues installing OSs connecting both the hard disks). When ever I power on the computer windows will boot by default, and I'll generally boot to ubuntu by pressing F8 and selecting the ubuntu hard disk. Any help is greatly appreciated!. Thank you!

    Read the article

  • Gnome 3 - Multiple Video Cards - Xinerama -- Forced Fallback Mode

    - by Alvin
    Just installed a 2nd nvidia video card -- previously had gnome 3 working perfectly with 2 monitors on a a single video card using twinview tried a number of things thus far twinview on 1 card + xinerama no xinerama no twinview various manual xorg.conf hacks based on random forums (couple references below) xinerama no twinview with and without Extensions Composite The last one is what I'm using now -- it results in a forced fallback mode with Composite Disable set at the end of xorg.conf via nvidia-settings Section "Extensions" Option "Composite" "Disable" EndSection when I disabled that last snippet it boots to gnome 3 full with the left monitor on a black screen and the middle monitor as primary but non-responsive switching to console mode Ctrl+Alt+F1 and then switching back I get 3 black screens with a mouse that can move around but nothing to interact with issue seems related to OpenGL and the multiple video cards -- I can boot into Unity without issue though my Glx-Dock shows up with the black background as barely shows in the screenshot below indicating the OpenGL is not initiated has anyone had any luck with getting Xinerama to work with Multiple NVidia Video Cards with OpenGL support? Found this in the logs while looking a bit further [ 23.208] (II) NVIDIA(1): Setting mode "nvidia-auto-select+0+0" [ 23.254] (WW) NVIDIA(1): The GPU driving screen 1 is incompatible with the rest of the [ 23.254] (WW) NVIDIA(1): GPUs composing the desktop. OpenGL rendering will be [ 23.254] (WW) NVIDIA(1): disabled on screen 1. [ 23.277] (==) NVIDIA(1): Disabling shared memory pixmaps [ 23.277] (==) NVIDIA(1): Backing store disabled [ 23.277] (==) NVIDIA(1): Silken mouse enabled [ 23.277] (==) NVIDIA(1): DPMS enabled According to this page at the NVidia User Docs http://us.download.nvidia.com/XFree86/Linux-x86/173.14.09/README/chapter-14.html I may be out of luck =( Starting this question with the hopes that others may be able to help debug and perhaps gain answers over time as I really want to get the full gnome 3 back.

    Read the article

  • Finding source of leaking active memory on Mac OS Lion

    - by Tim Kemp
    My activity monitor shows 6GB of active RAM usage: Yet my Real Memory column shows nothing like that amount: (There's another screenful below that, all smaller.) Backing that up, the output from this command (which sums up memory usage of every running process): ps -axm -o "rss,comm" | awk 'BEGIN { s=0;}; {s=s+$1;}; END { printf("%.2f GB\n", (s/1024.0/1024));}' Gives 4.09GB, so it looks to me like 2GB has leaked. I see much wider ranges sometimes, perhaps 2 or 3GB from the ps command and as much as 7 or 8GB of Active usage reported by Activity Monitor. I've tried quitting everything and logging my user out and back in again, but the Active usage is still far higher than the RAM reported by ps and by each process to Activity Monitor. This 2GB of active RAM is basically unrecoverable unless I reboot. Is there any way to a) detect what's leaking and b) get it back? Thanks

    Read the article

  • Why do some bad websites rank well?

    - by BradB
    Consider the following scenario: you are pitching SEO/Website Optimisation to a prospective client and you explain to them the importance of great copy and content, how acquiring links (ethically) can increase page rank, why the quality of the HTML build matters (H1, H2 tags, w3c validation etc), why keyword research is beneficial, you may drop in a few Google Webmaster Guideline or Matt Cutts references to back up your claims and rubbish the "back hat" approach as being no longer effective for good measure. Your advice is ethical and in the eyes of best practices, spot on. Then, the client points out to you some of their long established competitors on Google and you see these competitor websites ranking in the top spots (1 to 3) for medium to highly competitive search phrases that your client wants to compete for. These websites totally contradict your ethical approach and pretty much violate every best practice previously noted. They even out perform other "white hat" competitors who are in accordance with the above guidelines. I experienced this today. One of these well ranking websites had: About six microsites with more or less the same copy and a slightly varied layout Little or not textual content I would almost say duplicate content across the sites, but there was so little of it it could barely qualify for being duplicate All the content in Flash (with a music track that kicked in on each page load, not so much of an SEO issue - but it helps paint the picture) Keyword stuffing behind the Flash file with a bunch of black text on black background in the style of keyword 1 keyword 2,keyword1,keyword 2,keyword 2 keyword 3 and so on... The exact keyword stuffed combination present on every page of the website A bunch of clearly self made links from poor quality forums and directories with little or no Page Rank Links exchanged across the microsites How do you explain your way out of this when this hard evidence is sat in front of you undermining your great pitch?

    Read the article

  • IPsec Policy Agent flip-flopping demand start/auto start in Windows Server 2008?

    - by Steve Wortham
    Looking through the event logs on my web server I noticed a strange pattern. The following events have been occurring over and over again, always back to back: The start type of the IPsec Policy Agent service was changed from demand start to auto start. The start type of the IPsec Policy Agent service was changed from auto start to demand start. Each one produces event id 7040 from the Service Control Manager. And sometimes this will happen 20 times in one minute. Any idea what would cause this? I've been trying to pinpoint an intermittent performance problem for the past several days and this is the most peculiar thing I've found so far. I'm running Windows Server 2008, SQL Server 2008, and ASP.NET 3.5 w/ MVC 1.

    Read the article

  • CPU overheating after cleaning it

    - by Roberts
    I wanted to clean my computer CPU heatsink and fan itself, because the temperature is not what I wanted. About (50C ~ 70C). I have Intel Core 2 Duo E4300 @1.8 GHz (LGA775). The heatsink wasn't so scary filled with dust but I wanted to clean it anyway. I didn't know how to get heatsink with fan from the socket. So after 25 minutes I've figured it out. But I didn't know how to get it back on so I spent a lot time getting out the motherboard from the case. The fan and heatsink... The case and all components are clear of dust. (I'm tired now). Then I put all back just the way it was, well did few things on cable management. But the problem was that I didn't know how to connect front audio connectors. I had Windows XP hibernated. So I started the PC and everything was normal, except CMOS memory was clear. I configured the BIOS just the way it was and while I was doing that I saw about 58C CPU temperature and fan at 1789 RPM. Restarted the computer with new settings applied. But Windows halted with Blue Screen (I forgot what error it was but something with KERNEL). Restarted the PC and deleted hibernation session and everything was back normal. But couldn't record any sound from front panel microphone. The problem was that I messed ground wire with mic. Again after fixing it I turned computer on. No problems. The fan currently is noisy and temperature was 78C. The temperature before was 55C - 60C at idle. Now it's about 60C. If I do something then temperature raises to 79C. While speaking in skype the temperature was 82C. Could this problem occur because of the thermal grease (it's old and never replaced)? Edit The problem wasn't in thermal paste (because I didn't touch it). The problem was that I installed heatsink wrong. Now instead of regular 60C CPU temperature the CPU is at 48C (cool).

    Read the article

  • Are folders and filenames starting with "icon" illegal in SMB?

    - by dash-tom-bang
    Are five letter filenames starting with "icon" illegal in SMB? I just got a Drobo FS, in part to back up the computers in my house, and it does not accept folders named 'icons', 'iconv', or indeed I tried a bunch of other icon plus one letter names. I got errors on creation of these folders although now I don't remember the exact error. It has been confirmed with Drobo support that they "veto" files and folders named like this, due to them being illegal in the SMB spec. My Google skills so far have not been sufficient to turning any information on this up, however, so I wonder if anyone knows what's up? Sadly I can create these files and folders from my Mac, which I guess connects using AFP? But then I can't see them on my Windows machines. This is of little help if it is my Windows machines that I want to back up, and those being the ones with folders named like this. Thanks.

    Read the article

  • Won't boot after installing Ubuntu 12.04 sucessfully

    - by Matt
    I installed 12.04 successfully and rebooted (I took out my installation CD), and selected the newly installed Linux partition to boot from rEFIt. Then it just comes up with this error message: Error loading operating system which could not be more vague. Take that back. I guess it could say just "error." I don't even get to the boot prompt which limits what I can do. I cannot boot into rescue mode. I tried boot-repair, but it took more than 24 hours to check the system configuration, so I gave up on that. I'm running a Mac Mini with its main OS being Mac OS X 10.5.8. I have an alternate OS Windows XP installed, which was virtually destroyed by this Linux installation. I sacrificed my working, speedy Windows partition for something that won't even boot up. What was I thinking. My Mac partition is slow as crap. I've tried installing 12.04 many times with two different disks. The first time, I had one partition for Linux, then I had 2 (swap+main), then 3 (swap, main and BIOS), then 4 which is what I have now (swap, main, BIOS, and boot/grub). The only way I could get through the install without GRUB giving up was if I created a separate partition for it. Which was pointless, because it did install successfully, but it still doesn't boot up at all. Could rEFIt be booting off of the BIOS or one of the other partitions? Because if that's the case, there is no alternative, because Mac itself without rEFIt refuses to recognize a Linux ext4 (or 2 or 3) format partition. Apple always has to make everything so difficult. If I'm not mistaken, rEFIt is the only application of its kind for Mac. I can boot off of the CD back to the install/try screen. This is extremely upsetting, can you guys help? Please?

    Read the article

  • Spotlight on an Office – Reading TVP offices

    - by Maria Sandu
    This month we’re in the UK at the Reading offices, for ‘Spotlight on an office’. The Reading Office, which is Oracle’s UK Headquarters, is based in Thames Valley Park (TVP), which is a bustling hive of activity that houses many different companies, a gym, and even a nursery. Overlooking the Thames and some of England’s beautiful countryside, this office, just a short free bus ride from Reading Town Centre is in a fantastic location. The offices themselves are made up of 5 different buildings, each with their own car park, restaurant, and design. The main building or TVP 510 as it is referred to, sits resplendent next to an extremely blue (for the UK) pond, filled with large koi-carp that on a sunny day like to come to the surface of the lake and bask. As the main hub of activity, TVP 510 is where you will find our Dry Cleaning service, the Ozone Gym, the main restaurant (which never fails to have someone in it), and the Marquee which sits outside the back amongst the picnic benches, and is where we have Barbeques in the summer time. Another highlight of the Reading Offices is tucked away in TVP530; the home of H20, and our sports and social club. This is the building that can be best be described as having the ‘cool’ vibe, where you can relax and unwind, all whilst sipping a Starbucks (or Costa if you prefer, located in TVP550), and playing a game of Pool in the cafeteria, or alternatively you can sit back and enjoy a seat in one of the luxury massage chairs! If you feel so inclined, you can also hire out an OraBike from any of the TVP offices, and if you are anything like some of my team, cycle from Reading to Bath using the towpath starting in Thames Valley Park. Oracle’s Reading Offices are a great place to work, they are home to a diverse range of people and have great atmosphere which would suit a graduate, intern, or anyone who is looking to come and work for Oracle in the UK.

    Read the article

  • Mercurial mirror: abort: No such file or directory: http://[...]/00manifest.i

    - by Sridhar Ratnakumar
    I am trying to setup a daily mirror of a mercurial repository - code.python.org in particular - within our local network, and serve that via Apache HTTPD. On the remote host that hosts apache, I did this: $ cd /var/www $ hg clone http://code.python.org/hg/trunk/ On my macbook, I ran: $ hg -v clone http://remote/trunk/ (falling back to static-http) abort: No such file or directory: http://remote/trunk/.hg/store/00manifest.i Google does not show any relevant result for this particular error. I remember back in those days being able to setup Bazaar mirrors by a simple clone. Doesn't Mercurial work like that? How do I setup a mirror that must further act like a clone URL?

    Read the article

  • Semantic Form Markup for Yes or No Questions

    - by sholsinger
    I frequently receive mock-ups of HTML forms with the following prototype: Some long winded yes or no question?   (o) Yes   ( ) No The (o) and ( ) in this prototype represent radio buttons. My personal view is that if the question has only a true or false value then it should be a check box. That said, I have seen this sort of "layout" from almost every designer I've ever worked with. If I were not to question their decision, or question the client's decision, I'd probably mark it up like this: <p class="pseudo_label">Some long winded yes or no question?</p> <input type="radio" name="the_question" id="the_question_yes" value="1"> <label for="the_question_yes" class="after_radio">Yes</label> <input type="radio" name="the_question" id="the_question_no" value="0"> <label for="the_question_no" class="after_radio">No</label> I really don't want to do that. I want to push back and convince them that this should really be a check box and not two radio buttons. But my question is, if I can't convince them – you're welcome to help me try – how should I code that original design requirement such that it is semantic and at least understandable for screen reader users? If I were able to convince my tormentors to change their minds, I would likely code it in the following fashion: <label for="the_question">Some long winded yes or no question?</label> <input type="checkbox" name="the_question" id="the_question" value="1"> What do you think about this issue? Should I push back? Possibly more importantly is either way semantically correct? UPDATE: I have posted a related question on the UI SE per your suggestions. You can find it here: http://ui.stackexchange.com/q/3335/3493

    Read the article

  • Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs)

    - by simpleton
    I downloaded 12.04.1 and md5 sum checked them and everything is good. Made a live usb and booted up... Just gets to where its about to start with the purple ubuntu loading screen then it goes back to text and gives this message: BusyBox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) mount: mounting /dev/loop0 on ///filesystem.squashfs failed: Input/output error Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs This happens in the live option, or persistent even the file checking one doesn't work Also I've tried a few different F6 options to no avail. I used 'LiLi USB creator' and 'unetbootin' and also 'Universal USB Installer,' all with the same results. I've also tried using a VM and it showed the same. That is when I figured I had a corrupt .iso so I downloaded it again checked the MD5: e235b63c02644e219b7bf3668f479c9e. Only I'm having the same problem. I'm just about ready to give up on 12.04.1 and just go back to 10.04 utill the next LTS comes out. I've got a dell mini 10 btw. Thanks for your time.

    Read the article

  • Guaranteeing ACID properties for InnoDB databases.

    - by plinehan
    What steps must one take to ensure that an otherwise defaultly-configured InnoDB server is truly ACID compliant? The InnoDB configuration page mentions that the hardware itself must be configured to honor fsync calls, i.e. disable any write-back caches. This page mentions some other concerns, but may be conflating the binary log and the InnoDB log, and may be a bit out of date regarding default settings for MySQL 5.x. Upon reading the binary log document page it would seem that the "sync_binlog=1" setting is not required for ACID properties in general, only for ACID properties vis a vis point-in-time recovery and replication. So, is disabling write-back disk caching sufficient, or are there other settings that must be tweaked?

    Read the article

  • CPU fan twitching phase leds blinking - computer won't boot

    - by SooX
    I have a big problem that I got today. Yesterday computer was "on" normally, I went to sleep without shutting it down. When I woke up, I heard a strange sound and was unable to bring it up from hibernate. I unplugged the PSU. When I plugged the PSU back in, the sound came back. When I opened the case, I saw the fan "twitching" like it is about to start and fan LEDs were blinking. Also, motherboard LEDs were blinking in the same pattern - the first green one has more of luminosity then others. When I cut down the power with 0/1 button on PSU, the fans continue to make sounds like the machine is trying to boot before the capacitors run out and the power dies. Does anyone have a clue what to do? I tried disassembling everything but that doesn't work. I will try with friend's PSU later today.

    Read the article

  • Can thousands of backlinks from the same site harm PageRank?

    - by Dejan Pelzel
    I just noticed that one particular site has almost 7000 backlinks linking back to our website. The site is something like a news aggregator and for each post they created around 20 (sometimes much more) backlinks back to our page and they basically linked over 400 pages. I am beginning to get concerned that this amount of links might harm our page. They seem to have more backlinks to our page than all the other pages combined and more backlinks that our website has pages. We have seen a massive negative effect going on for quite a while and the PageRank seems to have dropped to None (Not even 0). But I am not sure when and why exactly that happened seeing that PageRank updates take quite a while to appear. The site linking to us is otherwise pretty reputable and doesn't seem to be having any problems with their rank. (PR 6 actually) I was thinking of using the Google disavow tool for this site, but I don't want to make things even worse. Do you think these are harmful? If so, how do I fix this? Thanks :)

    Read the article

  • What happens to remounted data/directories

    - by cauon
    According to suggestions in this post I am trying to improve my system to run better with a Solid State Drive. But regarding to RAMdisks and /etc/fstab usage I have some understanding problems coming up. So let's say I add the following lines to /etc/fstab tmpfs /tmp tmpfs defaults,noatime,nodiratime,mode=1777 0 0 tmpfs /var/spool tmpfs defaults,noatime,nodiratime,mode=1777 0 0 tmpfs /var/tmp tmpfs defaults,noatime,nodiratime,mode=1777 0 0 tmpfs /var/log tmpfs defaults,noatime,nodiratime,mode=0755 0 0 I know that on startup these locations should now get mounted into the RAM (hopefully). But what happens to the physical space that was mounted on those places before? Is it gone? Will it be back when I edit my /etc/fstab back to the Version without tmpfs? Will the space still be allocated on my SSD in a way that I can't use it for any other data? Sometimes it is suggested to add the following line, too: none /var/cache aufs dirs=/tmp:/var/cache=ro 0 0 What does this actually do? I noticed that /var/cache takes almost 1GB of space on my harddisk. So should i clear the directory before activating this line? (this is related to the former question) This causes me some confusions and I hope you can give me some clarifications. UPDATE I've downloaded a image with 600MB in size into /tmp that is mounted with the tmpfs settings above. Now I wanted to compare the RAM usage before and after the download. I expect the RAM usage to be increased by 600MB after the download. But the System Monitoring Tool showed me no changes at all. How can this be? Does tmpfs work other than I actually expect it to?

    Read the article

  • OOW 2012: Kings of Leon & Pearl Jam - Appreciation Event

    - by Mike Dietrich
    June 15, 1992 - that was actually the day when Pearl Jam played their first concert in Serenadenhof in my hometown, Nürnberg. Oups ... that's over 20 years ago ... So I was so happy to get a ticket to this year's OOW 2012 appreciation event on Treasure Island. Every year it amazes me over and over again how the organizers manage it logistically to bring almost 40,000 people to and back from the island. Food was ... I would say fairly ok ... and beer (as always) is not - actually even though I'm not a beer drinker I wouldn't call it beer.  Kings of Leon did start. I like them a lot and owe their 2008 album Only By Night. That was a good start to warm up the crowd. And then Pearl Jam took over - and ... wooooooow ... they are such a great live band. First of all as far as I understood they were donating the money they've got for that gig to an NGO. And Eddie Vedder's voice is simply striking ... I had shivers running down my spine. They played a good excerpt of their +20 years career closing down with Alive at the very end. It seemed to everybody that the band had real fun playing there - and it was sooooo good. Thanks a lot to the person who did organize me a ticket Catching my bus back to my hotel area down at Fisherman's Wharf worked well - but I must have fallen asleep 5 minutes after we've left the parking lot. The next thing I did recognize was the bus driver pushing the breaks at Northpoint. What a wonderful night ...

    Read the article

  • Stop YOUR emails from starting those company-wide Reply All email threads

    - by deadlydog
    You know you’ve seen it before; somebody sends out a company-wide email (or email to a large diverse audience), and a couple people or small group of people start replying-all back to the email with info/jokes that is only relative to that small group of people, yet EVERYBODY on the original email list has to suffer their inbox filling up with what is essentially spam since it doesn’t pertain to them or is something they don’t care about. A co-worker of mine made an ingenious off-hand comment to me one day of how to avoid this, and I’ve been using it ever since.  Simply place the email addresses of everybody that you are sending the email to in the BCC field (not the CC field), and in the TO field put your email address.  So everybody still gets the email, and they are easily able to reply back to you about it.  Note though, that the people you send the email to will not be able to see everyone else that you sent it to. Obviously you might not want to use this ALL the time; there are some times when you want a group discussion to occur over email.  But for those other times, such as when sending a NWR email about the car you are selling, asking everyone what a good local restaurant near by is, collecting personal info from people, or sharing a handy program or trick you learnt about (such as this one ), this trick can save everybody frustration and avoid wasting their time.  Trust me, your coworkers will thank you; mine did

    Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >