debian wheezy - Page 124

Rsyslog is not working properly, it does not log anything

- by Victor Henriquez

I'm running a Debian server and a couple of days ago my rsyslog started to behave very weird, the daemon is running but it doesn't seem to do anything. Many people use the system but I'm the only one with (legal) root access. I'm using the default rsyslogd configuration (if you think is relevant I'll attach it, but it's the one that comes with the package). After I rotated all the log files, they have remained empty: # ls -l /var/log/*.log -rw-r--r-- 1 root root 0 Jun 27 00:25 /var/log/alternatives.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/auth.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/daemon.log -rw-r--r-- 1 root root 0 Jun 27 00:25 /var/log/dpkg.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/kern.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/lpr.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/mail.log -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/user.log Any try to force a log writing does not have any effect: # logger hey # ls -l /var/log/messages -rw-r----- 1 root adm 0 Jun 26 13:03 /var/log/messages Lsof shows that rsyslogd does not have any log files opened: # lsof -p 1855 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME rsyslogd 1855 root cwd DIR 202,0 4096 2 / rsyslogd 1855 root rtd DIR 202,0 4096 2 / rsyslogd 1855 root txt REG 202,0 342076 21649 /usr/sbin/rsyslogd rsyslogd 1855 root mem REG 202,0 38556 32153 /lib/i386-linux-gnu/i686/cmov/libnss_nis-2.13.so rsyslogd 1855 root mem REG 202,0 79728 32165 /lib/i386-linux-gnu/i686/cmov/libnsl-2.13.so rsyslogd 1855 root mem REG 202,0 26456 32163 /lib/i386-linux-gnu/i686/cmov/libnss_compat-2.13.so rsyslogd 1855 root mem REG 202,0 297500 1061058 /usr/lib/rsyslog/imuxsock.so rsyslogd 1855 root mem REG 202,0 42628 32170 /lib/i386-linux-gnu/i686/cmov/libnss_files-2.13.so rsyslogd 1855 root mem REG 202,0 22784 1061106 /usr/lib/rsyslog/imklog.so rsyslogd 1855 root mem REG 202,0 1401000 32169 /lib/i386-linux-gnu/i686/cmov/libc-2.13.so rsyslogd 1855 root mem REG 202,0 30684 32175 /lib/i386-linux-gnu/i686/cmov/librt-2.13.so rsyslogd 1855 root mem REG 202,0 9844 32157 /lib/i386-linux-gnu/i686/cmov/libdl-2.13.so rsyslogd 1855 root mem REG 202,0 117009 32154 /lib/i386-linux-gnu/i686/cmov/libpthread-2.13.so rsyslogd 1855 root mem REG 202,0 79980 17746 /usr/lib/libz.so.1.2.3.4 rsyslogd 1855 root mem REG 202,0 18836 1061094 /usr/lib/rsyslog/lmnet.so rsyslogd 1855 root mem REG 202,0 117960 31845 /lib/i386-linux-gnu/ld-2.13.so rsyslogd 1855 root 0u unix 0xebe8e800 0t0 640 /dev/log rsyslogd 1855 root 3u FIFO 0,5 0t0 2474 /dev/xconsole rsyslogd 1855 root 4u unix 0xebe8e400 0t0 645 /var/spool/postfix/dev/log rsyslogd 1855 root 5r REG 0,3 0 4026532176 /proc/kmsg I was so frustrated that even reinstall the rsyslog package, but it still refuses to log anything: # apt-get remove --purge rsyslog # apt-get install rsyslog I thought someone had hacked the system, so run rkhunter, chkrootkit, unhide in an attempt to find hide processes / ports and nmap in a remote host to compare with the ports shown by netstat. And I know this doesn't mean anything, but all looks ok. The system also have an iptables firewall that is very restrictive with incoming / outgoing connections. This is driving me crazy, any idea what is going on here? [EDIT - disk space info] # df -h Filesystem Size Used Avail Use% Mounted on rootfs 24G 22G 629M 98% / /dev/root 24G 22G 629M 98% / devtmpfs 10M 112K 9.9M 2% /dev tmpfs 76M 48K 76M 1% /run tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 151M 40K 151M 1% /tmp tmpfs 151M 0 151M 0% /run/shm

Read the article

Can't re-mount existing RAID10 on Ubuntu

- by Zoran

I saw similar questions, but didn't find what solution to my problem. After power-cut, one of RAID10 (4 disks were) appears to be malfunctioning. I make tha array active one, but can not mount it. Always the same error: mount: you must specify the filesystem type So, here is what I have when type mdadm --detail /dev/md0 /dev/md0: Version : 00.90.03 Creation Time : Tue Sep 1 11:00:40 2009 Raid Level : raid10 Array Size : 1465148928 (1397.27 GiB 1500.31 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 4 Total Devices : 3 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Mon Jun 11 09:54:27 2012 State : clean, degraded Active Devices : 3 Working Devices : 3 Failed Devices : 0 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K UUID : 1a02e789:c34377a1:2e29483d:f114274d Events : 0.166 Number Major Minor RaidDevice State 0 8 16 0 active sync /dev/sdb 1 0 0 1 removed 2 8 48 2 active sync /dev/sdd 3 8 64 3 active sync /dev/sde At the /etc/mdadm/mdadm.conf I have by default, scan all partitions (/proc/partitions) for MD superblocks. alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes automatically tag new arrays as belonging to the local system HOMEHOST <system> instruct the monitoring daemon where to send mail alerts MAILADDR root definitions of existing MD arrays ARRAY /dev/md0 level=raid10 num-devices=4 UUID=1a02e789:c34377a1:2e29483d:f114274d ARRAY /dev/md1 level=raid1 num-devices=2 UUID=9b592be7:c6a2052f:2e29483d:f114274d This file was auto-generated... So, my question is, how can I mount md0 array (md1 has been mounted without problem) in order to preserve existing data? One more thing, fdisk -l command gives the following result: Disk /dev/sdb: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x660a6799 Device Boot Start End Blocks Id System /dev/sdb1 * 1 88217 708603021 83 Linux /dev/sdb2 88218 91201 23968980 5 Extended /dev/sdb5 88218 91201 23968948+ 82 Linux swap / Solaris Disk /dev/sdc: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x0008f8ae Device Boot Start End Blocks Id System /dev/sdc1 1 88217 708603021 83 Linux /dev/sdc2 88218 91201 23968980 5 Extended /dev/sdc5 88218 91201 23968948+ 82 Linux swap / Solaris Disk /dev/sdd: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x4be1abdb Device Boot Start End Blocks Id System Disk /dev/sde: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xa4d5632e Device Boot Start End Blocks Id System Disk /dev/sdf: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xdacb141c Device Boot Start End Blocks Id System Disk /dev/sdg: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xdacb141c Device Boot Start End Blocks Id System Disk /dev/md1: 750.1 GB, 750156251136 bytes 2 heads, 4 sectors/track, 183143616 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk identifier: 0xdacb141c Device Boot Start End Blocks Id System Warning: ignoring extra data in partition table 5 Warning: ignoring extra data in partition table 5 Warning: ignoring extra data in partition table 5 Warning: invalid flag 0x7b6e of partition table 5 will be corrected by w(rite) Disk /dev/md0: 1500.3 GB, 1500312502272 bytes 255 heads, 63 sectors/track, 182402 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x660a6799 Device Boot Start End Blocks Id System /dev/md0p1 * 1 88217 708603021 83 Linux /dev/md0p2 88218 91201 23968980 5 Extended /dev/md0p5 ? 121767 155317 269488144 20 Unknown And one more thing. When using mdadm --examine command, here ise result: mdadm -v --examine --scan /dev/sdb /dev/sdc /dev/sdd /dev/sde /dev/sdf /dev/sd ARRAY /dev/md1 level=raid1 num-devices=2 UUID=9b592be7:c6a2052f:2e29483d:f114274d devices=/dev/sdf ARRAY /dev/md0 level=raid10 num-devices=4 UUID=1a02e789:c34377a1:2e29483d:f114274d devices=/dev/sdb,/dev/sdc,/dev/sdd,/dev/sde md0 has 3 devices which are active. Can someone instruct me how to solve this issue? If it is possible, I would like not to removing faulty HDD. Please advise

Read the article

ScriptAlias makes requests match too many Location blocks. What is going on?

- by brain99

We wish to restrict access on our development server to those users who have a valid SSL Client certificate. We are running Apache 2.2.16 on Debian 6. However, for some sections (mainly git-http, setup with gitolite on https://my.server/git/) we need an exception since many git clients don't support SSL client certificates. I have succeeded in requiring client cert authentication for the server, and in adding exceptions for some locations. However, it seems this does not work for git. The current setup is as follows: SSLCACertificateFile ssl-certs/client-ca-certs.crt <Location /> SSLVerifyClient require SSLVerifyDepth 2 </Location> # this works <Location /foo> SSLVerifyClient none </Location> # this does not <Location /git> SSLVerifyClient none </Location> I have also tried an alternative solution, with the same results: # require authentication everywhere except /git and /foo <LocationMatch "^/(?!git|foo)"> SSLVerifyClient require SSLVerifyDepth 2 </LocationMatch> In both these cases, a user without client certificate can perfectly access my.server/foo/, but not my.server/git/ (access is refused because no valid client certificate is given). If I disable SSL client certificate authentication completely, my.server/git/ works ok. The ScriptAlias problem Gitolite is setup using the ScriptAlias directive. I have found that the problem occurs with any similar ScriptAlias: # Gitolite ScriptAlias /git/ /path/to/gitolite-shell/ ScriptAlias /gitmob/ /path/to/gitolite-shell/ # My test ScriptAlias /test/ /path/to/test/script/ Note that /path/to/test/script is a file, not a directory, the same goes for /path/to/gitolite-shell/ My test script simply prints out the environment, super simple: #!/usr/bin/perl print "Content-type:text/plain\n\n"; print "TEST\n"; @keys = sort(keys %ENV); foreach (@keys) { print "$_ => $ENV{$_}\n"; } It seems that if I go to https://my.server/test/someLocation, that any SSLVerifyClient directives are being applied which are in Location blocks that match /test/someLocation or just /someLocation. If I have the following config: <LocationMatch "^/f"> SSLVerifyClient require SSLVerifyDepth 2 </LocationMatch> Then, the following URL requires a client certificate: https://my.server/test/foo. However, the following URL does not: https://my.server/test/somethingElse/foo Note that this only seems to apply for SSL configuration. The following has no effect whatsoever on https://my.server/test/foo: <LocationMatch "^/f"> Order allow,deny Deny from all </LocationMatch> However, it does block access to https://my.server/foo. This presents a major problem for cases where I have some project running at https://my.server/project (which has to require SSL client certificate authorization), and there is a git repository for that project at https://my.server/git/project which cannot require a SSL client certificate. Since the /git/project URL also gets matched agains /project Location blocks, such a configuration seems impossible given my current findings. Question: Why is this happening, and how do I solve my problem? In the end, I want to require SSL Client certificate authorization for the whole server except for /git and /someLocation, with as minimal configuration as possible (so I don't have to modify the configuration each time something new is deployed or a new git repository is added). Note: I rewrote my question (instead of just adding more updates at the bottom) to take into account my new findings and hopefully make this more clear.

Read the article

/usr/bin/sshd isn't linked against PAM on one of my systems. What is wrong and how can I fix it?

- by marc.riera

Hi, I'm using AD as my user account server with ldap. Most of the servers run with UsePam yes except this one, it has lack of pam support on sshd. root@linserv9:~# ldd /usr/sbin/sshd linux-vdso.so.1 => (0x00007fff621fe000) libutil.so.1 => /lib/libutil.so.1 (0x00007fd759d0b000) libz.so.1 => /usr/lib/libz.so.1 (0x00007fd759af4000) libnsl.so.1 => /lib/libnsl.so.1 (0x00007fd7598db000) libcrypto.so.0.9.8 => /usr/lib/libcrypto.so.0.9.8 (0x00007fd75955b000) libcrypt.so.1 => /lib/libcrypt.so.1 (0x00007fd759323000) libc.so.6 => /lib/libc.so.6 (0x00007fd758fc1000) libdl.so.2 => /lib/libdl.so.2 (0x00007fd758dbd000) /lib64/ld-linux-x86-64.so.2 (0x00007fd759f0e000) I have this packages installed root@linserv9:~# dpkg -l|grep -E 'pam|ssh' ii denyhosts 2.6-2.1 an utility to help sys admins thwart ssh hac ii libpam-modules 0.99.7.1-5ubuntu6.1 Pluggable Authentication Modules for PAM ii libpam-runtime 0.99.7.1-5ubuntu6.1 Runtime support for the PAM library ii libpam-ssh 1.91.0-9.2 enable SSO behavior for ssh and pam ii libpam0g 0.99.7.1-5ubuntu6.1 Pluggable Authentication Modules library ii libpam0g-dev 0.99.7.1-5ubuntu6.1 Development files for PAM ii openssh-blacklist 0.1-1ubuntu0.8.04.1 list of blacklisted OpenSSH RSA and DSA keys ii openssh-client 1:4.7p1-8ubuntu1.2 secure shell client, an rlogin/rsh/rcp repla ii openssh-server 1:4.7p1-8ubuntu1.2 secure shell server, an rshd replacement ii quest-openssh 5.2p1_q13-1 Secure shell root@linserv9:~# What I'm doing wrong? thanks. Edit: root@linserv9:~# cat /etc/pam.d/sshd # PAM configuration for the Secure Shell service # Read environment variables from /etc/environment and # /etc/security/pam_env.conf. auth required pam_env.so # [1] # In Debian 4.0 (etch), locale-related environment variables were moved to # /etc/default/locale, so read that as well. auth required pam_env.so envfile=/etc/default/locale # Standard Un*x authentication. @include common-auth # Disallow non-root logins when /etc/nologin exists. account required pam_nologin.so # Uncomment and edit /etc/security/access.conf if you need to set complex # access limits that are hard to express in sshd_config. # account required pam_access.so # Standard Un*x authorization. @include common-account # Standard Un*x session setup and teardown. @include common-session # Print the message of the day upon successful login. session optional pam_motd.so # [1] # Print the status of the user's mailbox upon successful login. session optional pam_mail.so standard noenv # [1] # Set up user limits from /etc/security/limits.conf. session required pam_limits.so # Set up SELinux capabilities (need modified pam) # session required pam_selinux.so multiple # Standard Un*x password updating. @include common-password Edit2: UsePAM yes fails With this configuration ssh fails to start : root@linserv9:/home/admmarc# cat /etc/ssh/sshd_config |grep -vE "^[ \t]*$|^#" Port 22 Protocol 2 ListenAddress 0.0.0.0 RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys ChallengeResponseAuthentication yes UsePAM yes Subsystem sftp /usr/lib/sftp-server root@linserv9:/home/admmarc# The error it gives is as follows root@linserv9:/home/admmarc# /etc/init.d/ssh start * Starting OpenBSD Secure Shell server sshd /etc/ssh/sshd_config: line 75: Bad configuration option: UsePAM /etc/ssh/sshd_config: terminating, 1 bad configuration options ...fail! root@linserv9:/home/admmarc#

Read the article

How to use more than 3 virtual disks in Linux using CentOS and XenServer

- by 010110110101

I've attached 5 virtual disks to a Virtual Machine in Citrix XenServer. The VM has the xs-tools installed. Initially it said that it couldn't add so many disks. After I installed the xs-tools, it let me add all the disks. But /dev doesn't show all the disks. It shows these: /dev/xvda /dev/xvdb /dev/xvdc /dev/cdrom Perhaps it is bound by the limits of an IDE bus? (3 disks + CD-ROM) If so, how does one change the VM to use SCSI? Edit: According to the documentation: 2.6.3. VM Block Devices In the PV Linux case, block devices are passed through as PV devices. XenServer does not attempt to emulate SCSI or IDE, but instead provides a more suitable interface in the virtual environment in the form of xvd* devices. It is also possible to get an sd* device using the same mechanism, where the PV driver inside the VM takes over the SCSI device namespace. This is not desirable so it is best to use xvd* where possible for PV guests (this is the default for Debian and RHEL). For Windows or other fully virtualized guests, XenServer emulates an IDE bus in the form of an hd* device. When using Windows, installing the Citrix Tools for Virtual Machines installs a special PV driver that works in a similar way to Linux, except in the fully virtualized environment. Still, with 5 virtual disks attached, I don't see the other xvd devices. Edit #2: (attached requested info) Host Machine: XenServer 6.1 Linux version 2.6.32.43-0.4.1.xs1.6.10.777.170770xen (geeko@buildhost) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-51)) #1 SMP Wed Apr 17 05:52:03 EDT 2013 Guest Machine: CentOS release 6.4 (Final) Linux version 2.6.32-358.6.2.el6.x86_64 ([email protected]) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Thu May 16 20:59:36 UTC 2013 Output of 'fdisk -l' on Guest Machine: Note, the disk beyond the first 3 attached are not displaying -- there should be 4 100GB disks. (There are a total of 5 disks displayed in XenCenter -- 16GB, 100GB, 100GB, 100GB, 100GB) Disk /dev/xvdb: 107.4 GB, 107374182400 bytes 255 heads, 63 sectors/track, 13054 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xfb6c95b9 Device Boot Start End Blocks Id System /dev/xvdb1 1 13054 104856223+ 83 Linux Disk /dev/xvda: 17.2 GB, 17179869184 bytes 255 heads, 63 sectors/track, 2088 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e5f41 Device Boot Start End Blocks Id System /dev/xvda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/xvda2 64 2089 16264192 8e Linux LVM Disk /dev/xvdc: 107.4 GB, 107374182400 bytes 255 heads, 63 sectors/track, 13054 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xed249ced Device Boot Start End Blocks Id System /dev/xvdc1 1 13054 104856223+ 83 Linux Disk /dev/mapper/vg_blue-lv_root: 14.6 GB, 14571012096 bytes 255 heads, 63 sectors/track, 1771 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_blue-lv_swap: 2080 MB, 2080374784 bytes 255 heads, 63 sectors/track, 252 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 I see that the Linux versions say SMP. The Guest VM doesn't say "xen" in the name. However, I have already run yum install kernel-xen. Could be a clue?

Read the article

NPM not installing dependencies?

- by neezer

Having trouble getting NPM to install dependencies with npm install -d in my project directory with a defined package.json file. Here's my package.json: https://gist.github.com/3068312 And after wiping my project root's node modules folder (rm -rf node_modules), I run npm install -d in my project root and am greeted with this: (ssh) /vagrant git:master ? npm install -d npm info it worked if it ends with ok npm info using [email protected] npm info using [email protected] npm info preinstall [email protected] npm http GET https://registry.npmjs.org/sinon npm http GET https://registry.npmjs.org/underscore npm http GET https://registry.npmjs.org/mocha npm http GET https://registry.npmjs.org/request npm http 304 https://registry.npmjs.org/sinon npm http 304 https://registry.npmjs.org/underscore npm http 304 https://registry.npmjs.org/mocha npm http 304 https://registry.npmjs.org/request npm info into /vagrant [email protected] npm info into /vagrant [email protected] npm info into /vagrant [email protected] npm info into /vagrant [email protected] npm info installOne [email protected] npm info installOne [email protected] npm info installOne [email protected] npm info installOne [email protected] npm info unbuild /vagrant/node_modules/underscore npm info unbuild /vagrant/node_modules/mocha npm info unbuild /vagrant/node_modules/sinon npm info unbuild /vagrant/node_modules/request npm ERR! error installing [email protected] npm info unbuild /vagrant/node_modules/underscore npm ERR! error rolling back [email protected] Error: UNKNOWN, unknown error '/vagrant/node_modules/underscore' npm ERR! Error: ENOENT, no such file or directory '/vagrant/node_modules/underscore/package.json' npm ERR! You may report this log at: npm ERR! <http://bugs.debian.org/npm> npm ERR! or use npm ERR! reportbug --attach /vagrant/npm-debug.log npm npm ERR! npm ERR! System Linux 3.2.0-23-generic npm ERR! command "node" "/usr/bin/npm" "install" "-d" npm ERR! cwd /vagrant npm ERR! node -v v0.6.12 npm ERR! npm -v 1.1.4 npm ERR! path /vagrant/node_modules/underscore/package.json npm ERR! code ENOENT npm ERR! message ENOENT, no such file or directory '/vagrant/node_modules/underscore/package.json' npm ERR! errno {} npm ERR! error installing [email protected] npm info unbuild /vagrant/node_modules/request npm ERR! error rolling back [email protected] Error: UNKNOWN, unknown error '/vagrant/node_modules/request' npm ERR! npm ERR! Additional logging details can be found in: npm ERR! /vagrant/npm-debug.log npm not ok If I rerun npm install -d, the error changes to whatever the next package is... if I keep running it it over and over again, it eventually doesn't complain anymore and outputs: (ssh) /vagrant git:master ? npm install -d npm info it worked if it ends with ok npm info using [email protected] npm info using [email protected] npm info preinstall [email protected] npm info build /vagrant npm info linkStuff [email protected] npm info install [email protected] npm info postinstall [email protected] npm info ok However, none of the dependencies for any of these packages get installed. For instance, cheerio has a few dependencies, so when I try running my test suite, I'm greeted with: (ssh) /vagrant git:master ? mocha --compilers coffee:coffee-script --watch spec/* node.js:201 throw e; // process.nextTick error, or 'error' event on first tick ^ Error: Cannot find module 'cheerio-select' at Function._resolveFilename (module.js:332:11) at Function._load (module.js:279:25) at Module.require (module.js:354:17) What gives? I'm on Ubuntu Precise64 in a Vagrant virtual box.

Read the article

Static file download from browser breaking in varnish but works fine in Apache

- by Ron

I would at first like to thank everyone at serverfault for this great website and I also come to this site while searching in google for various server related issues and setups. I also have an issue today and so I am posting here and hope that the seniors would help me out. I had setup a website on a dedicated server a few days ago and I used Varnish 3 as the frontend to Apache2 on a Debian Lenny server as the traffic was a bit high. There are several static file downloads of around 10-20 MB in size in the website. The website looked fine in the last few days after I setup. I was checking from a 5mbps + broadband connection and the file downloads were also completed in seconds and working fine. But today I realized that on a slow internet connection the file downloads were breaking off. When I tried to download the files from the website using a browser then it broke off after a minute or so. It kept on happening again and again and so it had nothing to do with the internet connection. The internet connection was around 512 kbps and so it was not dial up level speed too but decent speed where files should easily download though not that fast. Then I thought of trying out with the apache backend port and used the port number to check out if the problem occurs. But then on adding the apache port in the static file download url, the files got downloaded easily and did not break even once. I tried it several times to make sure that it was not a coincidence but every time I was using the apache port in the file download url then it was downloading fine while it was breaking each time with the normal link which was routed through Varnish I suppose. So, it seems Varnish has somehow resulted in the broken file downloads. Could anyone give any idea as to why it is happening and how to fix the problem. For more clarification, take this example: Apache backend set on port 8008, Varnish frontend set on port 80 Now when I download say http://mywebsite.com/directory/filename.extension Then the download breaks off after a minute or so. I cannot be sure it is due to the time or size though and I am just assuming. May be some other reason too. But when I download using: http://mywebsite.com:8008/directory/filename.extension Then the file download does not break at all and it gets download fine. So, it seems that varnish is somehow creating the file download breaking and not apache. Does anybody have any idea as to why it is happening and how can it be fixed. Any help would be highly appreciated. And my varnish default.vcl is backend apache { set backend.host = "127.0.0.1"; set backend.port = "8008"; } sub vcl_deliver { remove resp.http.X-Varnish; remove resp.http.Via; remove resp.http.Age; remove resp.http.Server; remove resp.http.X-Powered-By; }

Read the article

MySQL InnoDB disappeared, all InnoDB data cant be accessed

- by dogmatic69

Mysql (including InnoDB) was working fine, after a restart the other day when mysql starts it says in the logs: 140604 23:36:07 [Note] Plugin 'FEDERATED' is disabled. 140604 23:36:07 [Note] Plugin 'InnoDB' is disabled. In the app it says: SQLSTATE[42000]: Syntax error or access violation: 1286 Unknown storage engine 'InnoDB' Now, according to google this is a very simple fix, just remove the ib_logfile[0|1] files, which I have done and does not do anything. I started by making a full copy of the data dir for testing various 'fixes'. I have also uninstalled mysql and reinstalled it with no change, I just cant get it to run with innodb working anymore :/ # mysql --version mysql Ver 14.14 Distrib 5.5.37, for debian-linux-gnu (x86_64) using readline 6.3 I have also tried the innodb_force_recovery setting, 0 - 6, Any time I run a command on an InnoDB table it says innodb_force_recovery LOGS (from around the time it died) was working here Version: '5.5.37-0ubuntu0.14.04.1' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 140530 1:24:22 [Note] /usr/sbin/mysqld: Normal shutdown 140530 1:24:22 [Note] Event Scheduler: Purging the queue. 0 events 140530 1:24:22 InnoDB: Starting shutdown... 140530 1:24:24 InnoDB: Shutdown completed; log sequence number 3345857316 140530 1:24:24 [Note] /usr/sbin/mysqld: Shutdown complete 140530 22:03:12 [Warning] Using unique option prefix myisam-recover instead of myisam-recover-options is deprecated and will be removed in a future release. Please use the full name instead. 140530 22:03:12 [Note] Plugin 'FEDERATED' is disabled. 140530 22:03:12 InnoDB: The InnoDB memory heap is disabled 140530 22:03:12 InnoDB: Mutexes and rw_locks use GCC atomic builtins 140530 22:03:12 InnoDB: Compressed tables use zlib 1.2.8 140530 22:03:12 InnoDB: Using Linux native AIO 140530 22:03:12 InnoDB: Initializing buffer pool, size = 128.0M 140530 22:03:12 InnoDB: Completed initialization of buffer pool 140530 22:03:12 InnoDB: highest supported file format is Barracuda. 140530 22:03:15 InnoDB: Waiting for the background threads to start 140530 22:03:16 InnoDB: 5.5.37 started; log sequence number 3345857316 140530 22:03:16 [Note] Server hostname (bind-address): '192.168.1.20'; port: 3306 140530 22:03:16 [Note] - '192.168.1.20' resolves to '192.168.1.20'; 140530 22:03:16 [Note] Server socket created on IP: '192.168.1.20'. 140530 22:03:16 [Note] Event Scheduler: Loaded 0 events 140530 22:03:16 [Note] /usr/sbin/mysqld: ready for connections. 140602 0:58:39 [Note] Event Scheduler: Purging the queue. 0 events 140602 0:58:39 InnoDB: Starting shutdown... 140602 0:58:41 InnoDB: Shutdown completed; log sequence number 3345954467 140602 0:58:41 [Note] /usr/sbin/mysqld: Shutdown complete does not work anymore 140602 21:45:19 [Warning] Using unique option prefix myisam-recover instead of myisam-recover-options is deprecated and will be removed in a future release. Please use the full name instead. 140602 21:45:19 [Note] Plugin 'FEDERATED' is disabled. 140602 21:45:19 [Note] Plugin 'InnoDB' is disabled. 140602 21:45:19 [Note] Server hostname (bind-address): '192.168.1.20'; port: 3306 140602 21:45:19 [Note] - '192.168.1.20' resolves to '192.168.1.20'; 140602 21:45:19 [Note] Server socket created on IP: '192.168.1.20'. 140602 21:45:19 [Note] Event Scheduler: Loaded 0 events 140602 21:45:19 [Note] /usr/sbin/mysqld: ready for connections.

Read the article

Why am I unable to telnet to a local port that has a listening service?

- by Skip Huffman

I suspect this is either a very simple question, or a very complex one. I have a headless server running ubuntu 10.04 that I can ssh into. I have full root access to the system. I am trying to set up an ssh tunnel to allow me to vnc to the system (but that isn't my question. I have vnc running on port 5903, here is the netstat output for that: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:5903 0.0.0.0:* LISTEN 7173/Xtightvnc tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 465/sshd But when I try to telnet to that port, from within the same system and login, I get unable to connect errors # telnet localhost 5903 Trying ::1... Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection timed out I am able to telnet to port 22 (as a verification) ~# telnet localhost 22 Trying ::1... Connected to localhost. Escape character is '^]'. SSH-2.0-OpenSSH_5.3p1 Debian-3ubuntu7 I have tried to open up any possible ports using ufw (probably clumsy fashion) # ufw status numbered Status: active To Action From -- ------ ---- [ 1] 5903 ALLOW IN Anywhere [ 2] 22 ALLOW IN Anywhere What else might be blocking this connection locally? Thank you, Edit: The only reference to port 5903 in iptable -L -n is this: Chain ufw-user-input (1 references) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5903 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5903 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:22 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:8080 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:8080 I can post the whole output if that will be useful. hosts.allow and hosts.deny both contain only comments. Re-Edit: Some other questions pointed me to nmap, so I ran a portscan through that utility: # nmap -v -sT localhost -p1-65535 Starting Nmap 5.00 ( http://nmap.org ) at 2011-11-09 09:58 PST NSE: Loaded 0 scripts for scanning. Warning: Hostname localhost resolves to 2 IPs. Using 127.0.0.1. Initiating Connect Scan at 09:58 Scanning localhost (127.0.0.1) [65535 ports] Discovered open port 22/tcp on 127.0.0.1 Connect Scan Timing: About 18.56% done; ETC: 10:01 (0:02:16 remaining) Connect Scan Timing: About 44.35% done; ETC: 10:00 (0:01:17 remaining) Completed Connect Scan at 10:00, 112.36s elapsed (65535 total ports) Host localhost (127.0.0.1) is up (0.00s latency). Interesting ports on localhost (127.0.0.1): Not shown: 65533 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp closed http Read data files from: /usr/share/nmap Nmap done: 1 IP address (1 host up) scanned in 112.43 seconds Raw packets sent: 0 (0B) | Rcvd: 0 (0B) I think this shows that 5903 is blocked somehow. Which I pretty much knew. The question remains what is blocking it and how to modify. Re-re-edit: To check Paul Lathrop's suggested answer, I first verified my ip address with ifconfig: eth0 Link encap:Ethernet HWaddr 02:16:3e:42:28:8f inet addr:10.0.10.3 Bcast:10.0.10.255 Mask:255.255.255.0 Then tried to telnet to 5903 from that address: # telnet 10.0.10.3 5903 Trying 10.0.10.3... telnet: Unable to connect to remote host: Connection timed out No luck. Re-re-re-re-edit: Ok, I think I have isolated it a bit to vncserver, not the firewall, darn it. I shut off vncserver and had netcat listen on port 5903. My vnc client then was able to establish a connnection and sit and wait for a response. Looks like I should be chasing a vnc problem. At least that is progress Thanks for the help

Read the article

unmet dependencies in Ubuntu 12.04

- by lee.O

I tried today to install a dvb-card on my Ubuntu 12.04 (Linux blauhai-linux 3.2.0-25-generic #40-Ubuntu SMP Wed May 23 20:30:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux ). The installation failed with an error. After that, i tried to install python (it was already installed but i got this error): linux:~$ sudo apt-get install git Reading package lists... Done Building dependency tree Reading state information... Done git is already the newest version. You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: python-glade2:i386 : Depends: python:i386 (< 2.5) but it is not going to be installed Depends: python-support:i386 (= 0.3.4) but it is not installable Depends: python:i386 (= 2.4) but it is not going to be installed Depends: libglade2-0:i386 (= 1:2.5.1) but it is not going to be installed Depends: python-gtk2:i386 (= 2.8.6-8) but it is not going to be installed python-numeric:i386 : Depends: python:i386 (< 2.5) but it is not going to be installed Depends: python:i386 (= 2.3) but it is not going to be installed Depends: python-central:i386 (= 0.5.7) but it is not installable E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). well, i can read and tried the proposed command, but then i get this: linux:~$ sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required: libopenal1:i386 libsdl-ttf2.0-0:i386 libkrb5-3:i386 libgconf-2-4:i386 libsm-dev libatk1.0-0:i386 libk5crypto3:i386 libstdc++5:i386 libqt4-declarative:i386 libxcomposite1:i386 libice-dev libgail18:i386 libldap-2.4-2:i386 libao-common libv4l-0:i386 liblcms1:i386 libqt4-qt3support:i386 libroken18-heimdal:i386 libunistring0:i386 libcupsimage2:i386 libgphoto2-port0:i386 libidn11:i386 libnss3:i386 libcaca0:i386 gtk2-engines:i386 libgudev-1.0-0:i386 libjpeg-turbo8:i386 libpthread-stubs0 libcairo-gobject2:i386 libavc1394-0:i386 libjpeg8:i386 libotr2 libaio1:i386 libsane:i386 odbcinst1debian2 odbcinst1debian2:i386 libqt4-test:i386 libqt4-script:i386 libqt4-designer:i386 libsdl-mixer1.2:i386 libqt4-network:i386 libqt4-dbus:i386 libcap2:i386 libproxy1:i386 ibus-gtk:i386 libdbus-glib-1-2:i386 libtdb1:i386 libasn1-8-heimdal:i386 libspeex1:i386 libxslt1.1:i386 libgomp1:i386 libcapi20-3:i386 libibus-1.0-0:i386 libcairo2:i386 libgnutls26:i386 libopenal-data odbcinst libgssapi3-heimdal:i386 libcanberra0:i386 libtasn1-3:i386 libfreetype6:i386 x11proto-kb-dev gtk2-engines-murrine:i386 libwavpack1:i386 libqt4-opengl:i386 libsoup-gnome2.4-1:i386 libv4lconvert0:i386 gstreamer0.10-plugins-good:i386 libc6-i386 lib32gcc1 libqt4-xmlpatterns:i386 librsvg2-common:i386 libdatrie1:i386 xtrans-dev libavahi-common-data:i386 libiec61883-0:i386 lib32asound2 libgdk-pixbuf2.0-0:i386 libsdl-image1.2:i386 libp11-kit0:i386 x11proto-input-dev libwind0-heimdal:i386 libpixman-1-0:i386 libsdl1.2debian:i386 libxaw7:i386 libgdbm3:i386 libcups2:i386 libcurl3:i386 libqtcore4:i386 libxinerama1:i386 libesd0:i386 libmikmod2:i386 libkrb5support0:i386 libxft2:i386 libxt-dev libcroco3:i386 libpulse-mainloop-glib0:i386 libice6:i386 libaa1:i386 libieee1284-3:i386 libgcrypt11:i386 libthai0:i386 libao4:i386 libkeyutils1:i386 libxmu6:i386 libcanberra-gtk0:i386 libvorbisfile3:i386 libqt4-sql:i386 esound-common libxpm4:i386 libqt4-svg:i386 libusb-0.1-4:i386 libgail-common:i386 libxrender1:i386 libhcrypto4-heimdal:i386 libraw1394-11:i386 libnspr4:i386 libshout3:i386 libdv4:i386 libhx509-5-heimdal:i386 libxau-dev libqt4-xml:i386 gstreamer0.10-x:i386 libgettextpo0:i386 libxss1:i386 libgd2-xpm:i386 libheimbase1-heimdal:i386 libtiff4:i386 libsdl-net1.2:i386 libjasper1:i386 libgnome-keyring0:i386 libxtst6:i386 gtk2-engines-pixbuf:i386 libqtgui4:i386 libtag1c2a:i386 librsvg2-2:i386 libavahi-client3:i386 libssl0.9.8:i386 libmpg123-0:i386 libmad0:i386 libsasl2-2:i386 xorg-sgml-doctools libgsoap1 gtk2-engines-oxygen:i386 libfontconfig1:i386 xaw3dg:i386 libpango1.0-0:i386 libsm6:i386 libx11-dev libheimntlm0-heimdal:i386 libpulsedsp:i386 lib32stdc++6 libx11-doc libqt4-sql-mysql:i386 libxcb-render0:i386 libodbc1:i386 libexif12:i386 libqt4-scripttools:i386 librtmp0:i386 libgssapi-krb5-2:i386 libxi6:i386 libqtwebkit4:i386 libxcb1-dev libxp6:i386 libaudio2:i386 libxcursor1:i386 libxcb-shm0:i386 libxt6:i386 libxv1:i386 libsasl2-modules:i386 libavahi-common3:i386 libxrandr2:i386 x11proto-core-dev libsqlite3-0:i386 libmng1:i386 libgtk2.0-0:i386 libxdmcp-dev libpthread-stubs0-dev libltdl7:i386 libkrb5-26-heimdal:i386 libssl1.0.0:i386 glib-networking:i386 libgpg-error0:i386 libsoup2.4-1:i386 libgphoto2-2:i386 libtag1-vanilla:i386 libaudiofile1:i386 libglade2-0:i386 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: default-jre default-jre-headless icedtea-6-jre-cacao icedtea-6-jre-jamvm icedtea-netx icedtea-netx-common libglade2-0:i386 libpython3.2 openjdk-6-jre openjdk-6-jre-headless openjdk-6-jre-lib python3 python3-minimal python3-uno python3.2 python3.2-minimal Suggested packages: icedtea-plugin sun-java6-fonts fonts-ipafont-gothic fonts-ipafont-mincho ttf-telugu-fonts ttf-oriya-fonts ttf-kannada-fonts ttf-bengali-fonts python3-doc python3-tk python3.2-doc binfmt-support The following packages will be REMOVED: activity-log-manager-control-center aisleriot alacarte apparmor apport apport-gtk apt-xapian-index aptdaemon apturl apturl-common bluez bluez-alsa bluez-alsa:i386 bluez-gstreamer checkbox checkbox-qt command-not-found compiz compiz-gnome compiz-plugins-main-default compizconfig-backend-gconf deja-dup duplicity eog evolution-data-server firefox firefox-globalmenu firefox-gnome-support foomatic-db-compressed-ppds gconf-editor gconf2 gdb gedit gir1.2-mutter-3.0 gir1.2-peas-1.0 gir1.2-rb-3.0 gir1.2-totem-1.0 gir1.2-ubuntuoneui-3.0 gksu gnome-applets gnome-applets-data gnome-bluetooth gnome-contacts gnome-control-center gnome-media gnome-menus gnome-orca gnome-panel gnome-panel-data gnome-session-fallback gnome-shell gnome-sudoku gnome-terminal gnome-terminal-data gnome-themes-standard gnome-tweak-tool gnome-user-share gstreamer0.10-gconf gwibber gwibber-service gwibber-service-facebook gwibber-service-identica gwibber-service-twitter hplip hplip-data ia32-libs ia32-libs-multiarch:i386 ibus ibus-pinyin ibus-table indicator-datetime indicator-power jockey-common jockey-gtk landscape-client-ui-install language-selector-common language-selector-gnome launchpad-integration libcanberra-gtk-module libcanberra-gtk-module:i386 libcanberra-gtk3-module libcompizconfig0 libfolks-eds25 libgksu2-0 libgnome-media-profiles-3.0-0 libgnome2-0 libgnome2-common libgnomevfs2-0 libgnomevfs2-common libgweather-3-0 libgweather-common libgwibber-gtk2 libgwibber2 libmetacity-private0 libmutter0 libpeas-1.0-0 libpurple-bin libpython2.7 libreoffice-gnome librhythmbox-core5 libsyncdaemon-1.0-1 libtotem0 libubuntuoneui-3.0-1 light-themes lsb-release metacity metacity-common mutter-common nautilus-dropbox nautilus-share network-manager-gnome nvidia-common nvidia-settings nvidia-settings-updates onboard oneconf openjdk-7-jdk openjdk-7-jre openprinting-ppds pidgin pidgin-libnotify pidgin-otr printer-driver-foo2zjs printer-driver-ptouch printer-driver-pxljr printer-driver-sag-gdi printer-driver-splix python python-appindicator python-apport python-apt python-apt-common python-aptdaemon python-aptdaemon.gtk3widgets python-aptdaemon.pkcompat python-brlapi python-cairo python-central python-chardet python-configglue python-crypto python-cups python-cupshelpers python-dateutil python-dbus python-debian python-debtagshw python-defer python-dirspec python-egenix-mxdatetime python-egenix-mxtools python-gconf python-gdbm python-gi python-gi-cairo python-glade2:i386 python-gmenu python-gnomekeyring python-gnupginterface python-gobject python-gobject-2 python-gpgme python-gst0.10 python-gtk2 python-httplib2 python-ibus python-imaging python-keyring python-launchpadlib python-lazr.restfulclient python-lazr.uri python-libproxy python-libxml2 python-louis python-mako python-markupsafe python-minimal python-notify python-numeric:i386 python-oauth python-openssl python-packagekit python-pam python-pexpect python-piston-mini-client python-pkg-resources python-problem-report python-protobuf python-pyatspi2 python-pycurl python-pyinotify python-renderpm python-reportlab python-reportlab-accel python-serial python-simplejson python-smbc python-software-properties python-speechd python-twisted-bin python-twisted-core python-twisted-names python-twisted-web python-ubuntu-sso-client python-ubuntuone-client python-ubuntuone-control-panel python-ubuntuone-storageprotocol python-uno python-virtkey python-wadllib python-xapian python-xdg python-xkit python-zeitgeist python-zope.interface python2.7 python2.7-minimal rhythmbox rhythmbox-mozilla rhythmbox-plugin-cdrecorder rhythmbox-plugin-magnatune rhythmbox-plugin-zeitgeist rhythmbox-plugins rhythmbox-ubuntuone screen-resolution-extra sessioninstaller skype software-center software-center-aptdaemon-plugins software-properties-common software-properties-gtk system-config-printer-common system-config-printer-gnome system-config-printer-udev texlive-extra-utils totem totem-mozilla totem-plugins ubuntu-artwork ubuntu-desktop ubuntu-minimal ubuntu-sso-client ubuntu-sso-client-gtk ubuntu-standard ubuntu-system-service ubuntuone-client ubuntuone-client-gnome ubuntuone-control-panel ubuntuone-couch ubuntuone-installer ufw unattended-upgrades unity unity-2d unity-common unity-lens-applications unity-lens-video unity-scope-musicstores unity-scope-video-remote update-manager update-manager-core update-notifier update-notifier-common usb-creator-common usb-creator-gtk virtualbox virtualbox-dkms virtualbox-qt xdiagnose xul-ext-ubufox zeitgeist zeitgeist-core zeitgeist-datahub The following NEW packages will be installed: default-jre default-jre-headless icedtea-6-jre-cacao icedtea-6-jre-jamvm icedtea-netx icedtea-netx-common libglade2-0:i386 libpython3.2 openjdk-6-jre openjdk-6-jre-headless openjdk-6-jre-lib python3 python3-minimal python3-uno python3.2 python3.2-minimal WARNING: The following essential packages will be removed. This should NOT be done unless you know exactly what you are doing! python-minimal python2.7-minimal (due to python-minimal) 0 upgraded, 16 newly installed, 273 to remove and 0 not upgraded. 2 not fully installed or removed. Need to get 39.1 MB of archives. After this operation, 324 MB disk space will be freed. You are about to do something potentially harmful. To continue type in the phrase 'Yes, do as I say!' ?] Thats not good, is it?! Should i run this command or should i run another command to fix this problem? Would be great if somebody can help me. :) Thanks in advance. best regards

Read the article

Cannot install or remove packages

- by Nuno

I tried to install the openoffice.org package but it gave an error. Now i cannot repair, remove or install nothing. The Software center of xubuntu gives this error log. Nothing seems to solve this. I tried apt-get install -f but it does not solve the problem either. Any suggestions? installArchives() failed: (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 184189 files and directories currently installed.) Unpacking libreoffice-common (from .../libreoffice-common_1%3a3.5.4-0ubuntu1.1_all.deb) ... dpkg: error processing /var/cache/apt/archives/libreoffice-common_1%3a3.5.4-0ubuntu1.1_all.deb (--unpack): trying to overwrite '/usr/bin/soffice', which is also in package openoffice.org-debian-menus 3.2-9502 No apport report written because MaxReports is reached already rmdir: erro ao remover /var/lib/libreoffice/share/prereg/: Ficheiro ou directoria inexistente rmdir: erro ao remover /var/lib/libreoffice/share/: Directoria no vazia rmdir: erro ao remover /var/lib/libreoffice/program/: Ficheiro ou directoria inexistente rmdir: erro ao remover /var/lib/libreoffice: Directoria no vazia rmdir: erro ao remover /var/lib/libreoffice: Directoria no vazia Processing triggers for desktop-file-utils ... Processing triggers for shared-mime-info ... Processing triggers for gnome-icon-theme ... Processing triggers for hicolor-icon-theme ... Processing triggers for man-db ... Errors were encountered while processing: /var/cache/apt/archives/libreoffice-common_1%3a3.5.4-0ubuntu1.1_all.deb dpkg: dependency problems prevent configuration of libreoffice-java-common: libreoffice-java-common depends on libreoffice-common; however: Package libreoffice-common is not installed. dpkg: error processing libreoffice-java-common (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libreoffice-filter-mobiledev: libreoffice-filter-mobiledev depends on libreoffice-java-common; however: Package libreoffice-java-common is not configured yet. dpkg: error processing libreoffice-filter-mobiledev (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libreoffice-base: libreoffice-base depends on libreoffice-java-common (>= 1:3.5.4~); however: Package libreoffice-java-common is not configured yet. dpkg: error processing libreoffice-base (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libreoffice-core: libreoffice-core depends on libreoffice-common (>> 1:3.5.4); however: Package libreoffice-common is not installed. dpkg: error processing libreoffice-core (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libreoffice-style-human: libreoffice-style-human depends on libreoffice-core; however: Package libreoffice-core is not configured yet. dpkg: error processing libreoffice-style-human (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libreoffice-math: libreoffice-math depends on libreoffice-core (= 1:3.5.4-0ubuntu1.1); however: Package libreoffice-core is not configured yet. dpkg: error processing libreoffice-math (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libreoffice-impress: libreoffice-impress depends on libreoffice-core (= 1:3.5.4-0ubuntu1.1); however: Package libreoffice-core is not configured yet. dpkg: error processing libreoffice-impress (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libreoffice-style-tango: libreoffice-style-tango depends on libreoffice-core; however: Package libreoffice-core is not configured yet. dpkg: error processing libreoffice-style-tango (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libreoffice: libreoffice depends on libreoffice-core (= 1:3.5.4-0ubuntu1.1); however: Package libreoffice-core is not configured yet. libreoffice depends on libreoffice-impress; however: Package libreoffice-impress is not configured yet. libreoffice depends on libreoffice-math; however: Package libreoffice-math is not configured yet. libreoffice depends on libreoffice-base; however: Package libreoffice-base is not configured yet. libreoffice depends on libreoffice-filter-mobiledev; however: Package libreoffice-filter-mobiledev is not configured yet. libreoffice depends on libreoffice-java-common (>= 1:3.5.4~); however: Package libreoffice-java-common is not configured yet. dpkg: error processing libreoffice (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libreoffice-writer: libreoffice-writer depends on libreoffice-core (= 1:3.5.4-0ubuntu1.1); however: Package libreoffice-core is not configured yet. dpkg: error processing libreoffice-writer (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of mythes-en-us: mythes-en-us depends on libreoffice-core | openoffice.org-core (>= 1.9) | language-support-writing-en; however: Package libreoffice-core is not configured yet. Package openoffice.org-core is not installed. Package language-support-writing-en is not installed. dpkg: error processing mythes-en-us (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libreoffice-help-zh-cn: libreoffice-help-zh-cn depends on libreoffice-writer | language-support-translations-zh; however: Package libreoffice-writer is not configured yet. Package language-support-translations-zh is not installed. dpkg: error processing libreoffice-help-zh-cn (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libreoffice-base-core: libreoffice-base-core depends on libreoffice-core (= 1:3.5.4-0ubuntu1.1); however: Package libreoffice-core is not configured yet. dpkg: error processing libreoffice-base-core (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libreoffice-gnome: libreoffice-gnome depends on libreoffice-core (= 1:3.5.4-0ubuntu1.1); however: Package libreoffice-core is not configured yet. dpkg: error processing libreoffice-gnome (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libreoffice-help-pt-br: libreoffice-help-pt-br depends on libreoffice-writer | language-support-translations-pt; however: Package libreoffice-writer is not configured yet. Package language-support-translations-pt is not installed. dpkg: error processing libreoffice-help-pt-br (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libreoffice-emailmerge: libreoffice-emailmerge depends on libreoffice-core; however: Package libreoffice-core is not configured yet. dpkg: error processing libreoffice-emailmerge (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libreoffice-help-en-gb: libreoffice-help-en-gb depends on libreoffice-writer | language-support-translations-en; however: Package libreoffice-writer is not configured yet. Package language-support-translations-en is not installed. dpkg: error processing libreoffice-help-en-gb (--configure): dependency problems - leaving unconfigured

Read the article

Network Access: I can't access 192.168.1.101 from 192.168.1.102.

- by takpar

Hi, I'm running Ubuntu 10.04 on my PC with IP 192.168.1.101. every thing work fine, e.g. my web server is running and I can see http://localhost/ or http://192.168.1.101 properly. But the problem is that I cannot see my PC from my laptop at 192.168.1.102 e.g. at my laptop http://192.168.1.101 gives Connection timed out in browser. or trying to telnet on any port leads to: telnet: Unable to connect to remote host: Connection timed out laptop is running a fresh install of Ubuntu as well and there is no setup for firewall stuff in both computers. PS: Both computers can ping each other well. The router is a cicso linksys wireless ADSL modem. Currently, I can connect to FTP server on the Windows running on 192.168.1.102 from 192.168.1.101 without problem. Theses are commands ran on my PC, 192.168.1.101: ifconfig: adp@adp-desktop:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:26:18:e1:8e:cf inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe70::226:18ff:fee1:8ecf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1831935 errors:0 dropped:0 overruns:0 frame:0 TX packets:1493786 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1996855925 (1.9 GB) TX bytes:215288238 (215.2 MB) Interrupt:27 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:951742 errors:0 dropped:0 overruns:0 frame:0 TX packets:951742 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:494351095 (494.3 MB) TX bytes:494351095 (494.3 MB) vmnet1 Link encap:Ethernet HWaddr 00:50:46:c0:00:01 inet addr:192.168.91.1 Bcast:192.168.91.255 Mask:255.255.255.0 inet6 addr: fe70::250:56ff:fec0:1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:50 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) vmnet8 Link encap:Ethernet HWaddr 00:50:46:c0:00:08 inet addr:192.168.156.1 Bcast:192.168.156.255 Mask:255.255.255.0 inet6 addr: fe70::250:56ff:fec0:8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:51 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) port 80 is set to 0.0.0.0 well: adp@adp-desktop:~$ netstat -ln | grep 'LISTEN ' tcp 0 0 127.0.0.1:52815 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:4559 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:4369 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:7634 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5269 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5280 0.0.0.0:* LISTEN tcp 0 0 127.0.1.1:7777 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:33601 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5222 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN tcp6 0 0 :::139 :::* LISTEN tcp6 0 0 ::1:631 :::* LISTEN tcp6 0 0 :::445 :::* LISTEN /etc/hosts.deny is empty: adp@adp-desktop:~$ cat /etc/hosts.deny # /etc/hosts.deny: list of hosts that are _not_ allowed to access the system. # See the manual pages hosts_access(5) and hosts_options(5). # # Example: ALL: some.host.name, .some.domain # ALL EXCEPT in.fingerd: other.host.name, .other.domain # # If you're going to protect the portmapper use the name "portmap" for the # daemon name. Remember that you can only use the keyword "ALL" and IP # addresses (NOT host or domain names) for the portmapper, as well as for # rpc.mountd (the NFS mount daemon). See portmap(8) and rpc.mountd(8) # for further information. # # The PARANOID wildcard matches any host whose name does not match its # address. # # You may wish to enable this to ensure any programs that don't # validate looked up hostnames still leave understandable logs. In past # versions of Debian this has been the default. # ALL: PARANOID netstat -l: adp@adp-desktop:~$ netstat -l Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 localhost:52815 *:* LISTEN tcp 0 0 *:hylafax *:* LISTEN tcp 0 0 *:www *:* LISTEN tcp 0 0 *:4369 *:* LISTEN tcp 0 0 localhost:7634 *:* LISTEN tcp 0 0 *:ftp *:* LISTEN tcp 0 0 *:xmpp-server *:* LISTEN tcp 0 0 localhost:ipp *:* LISTEN tcp 0 0 *:smtp *:* LISTEN tcp 0 0 *:5280 *:* LISTEN tcp 0 0 adp-desktop:7777 *:* LISTEN tcp 0 0 *:33601 *:* LISTEN tcp 0 0 *:xmpp-client *:* LISTEN tcp 0 0 localhost:mysql *:* LISTEN tcp6 0 0 [::]:netbios-ssn [::]:* LISTEN tcp6 0 0 localhost:ipp [::]:* LISTEN tcp6 0 0 [::]:microsoft-ds [::]:* LISTEN udp 0 0 *:bootpc *:* udp 0 0 *:mdns *:* udp 0 0 *:47467 *:* udp 0 0 192.168.1.10:netbios-ns *:* udp 0 0 192.168.91.1:netbios-ns *:* udp 0 0 192.168.156.:netbios-ns *:* udp 0 0 *:netbios-ns *:* udp 0 0 192.168.1.1:netbios-dgm *:* udp 0 0 192.168.91.:netbios-dgm *:* udp 0 0 192.168.156:netbios-dgm *:* udp 0 0 *:netbios-dgm *:* raw 0 0 *:icmp *:* 7 netstat -rn: adp@adp-desktop:~$ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.91.0 0.0.0.0 255.255.255.0 U 0 0 0 vmnet1 192.168.156.0 0.0.0.0 255.255.255.0 U 0 0 0 vmnet8 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 commands on the laptop, 192.168.1.102: ifconfig: root@fakeuser-laptop:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:1c:33:a2:31:15 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:21 eth1 Link encap:Ethernet HWaddr 00:2d:d9:3e:1f:6c inet addr:192.168.1.102 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe70::21d:d9ff:fe3e:1f6c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5681 errors:0 dropped:0 overruns:0 frame:10313 TX packets:6717 errors:6 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4055251 (4.0 MB) TX bytes:779308 (779.3 KB) Interrupt:18 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:206 errors:0 dropped:0 overruns:0 frame:0 TX packets:206 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:15172 (15.1 KB) TX bytes:15172 (15.1 KB) netstat -rn: root@fakeuser-laptop:~# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1

Read the article

Not attending the LUGM mini-meetup - 05. Oct 2013

Not attending a meeting of the LUGM can be fun, too. It's getting a bit of a habit that Ish is organising small gatherings, aka mini-meetups, of the Linux User Group Mauritius/Meta (LUGM) almost every Saturday. There they mainly discuss and talk about various elements of using Linux as ones main operating systems and the possibilities you are going to have. On top of course, some tips & tricks about mastering the command line and initial steps in scripting or even writing HTML. In general, sounds like a good portion of fun and great spirit of community. Unfortunately, I'm usually quite busy with private and family matters during the weekend and so I already signalised that I wouldn't be around. Well, at least not physically... But this Saturday a couple of things worked out faster than expected and so I was hanging out on my machine. I made virtual contact with one of Pawan's messages over on Facebook... And somehow that kicked off some kind of an online game fun on basic configuration of Apache HTTPd 2.2.x, PHP 5.x and how to improve the overall performance of a newly installed blog based on WordPress. Default configuration files Nitin's website finally came alive and despite the dark theme and the hidden Apple 'fanboy' advertisement I was more interested in the technical situation. As with any new installation there is usually quite some adjustment to be done. And Nitin's page was no exception. Unfortunately, out of the box installations of Apache httpd and PHP are too verbose and expose too much information under the hood. You might think that this isn't really a problem at all, well, think about it again after completely reading this article. First, I checked the HTTP response headers - using either Chrome Developer Tools or Firefox Web Developer extension - of Nitin's page and based on that I advised him to lower the noise levels a little bit. It's not really necessary that detailed information about web server software and scripting language has to be published in every response made. Quite a number of script kiddies and exploits actually check for version specifics prior to an attack. So, removing at least version details hardens the system a little bit. In particular, I'm talking about these response values: Server X-Powered-By How to achieve that? By tweaking the configuration files... Namely, we are going to look into the following ones: apache2.conf httpd.conf .htaccess php.ini The above list contains some additional files, I'm talking about in the next paragraphs. Anyway, those are the ones involved. Tweaking Apache Open your favourite text editor and start to modify the apache2.conf. Eventually, you might like to have a quick peak at the file to see whether it is necessary to adjust it or not. Following is a handy combination of commands to get an overview of your active directives: # sudo grep -v '#' /etc/apache2/apache2.conf | grep -v '^$' | less There you keep an eye on those two Apache directives: ServerSignature Off ServerTokens Prod If that's not the case, change them as highlighted above. In order to activate your modifications you have to restart Apache httpd server. On Debian and Ubuntu you might use apache2ctl for that, on other distributions you might have to use service or run the init-scripts again: # sudo apache2ctl configtestSyntax OK# sudo apache2ctl restart Refresh your website and check the HTTP response header. Tweaking PHP5 (a little bit) Next, check your php.ini file with the following statement: # sudo grep -v ';' /etc/php5/apache2/php.ini | grep -v '^$' | less And check the value of expose_php = Off Again, if it's not as highlighted, change it... Some more Apache love Okay, back to Apache it might also be interesting to improve the situation about browser caching and removing more obsolete information. When you run your website against the usual performance checks like Google Page Speed and Yahoo YSlow you might see those check points with bad grades on a standard, default configuration. Well, this can be done easily. Configure entity tags (ETags) ETags are only interesting when you run your websites on a farm of multiple web servers. Removing this data for your static resources is very simple in Apache. As we are going to deal with the HTTP response header information you have to ensure that Apache is capable to manipulate them. First, check your enabled modules: # sudo ls -al /etc/apache2/mods-enabled/ | grep headers And in case that the 'headers' module is not listed, you have to enable it from the available ones: # sudo a2enmod headers Second, check your httpd.conf file (in case it exists): # sudo grep -v '#' /etc/apache2/httpd.conf | grep -v '^$' | less In newer (better said fresh) installations you might have to create a new configuration file below your conf.d folder with your favourite text editor like so: # sudo nano /etc/apache2/conf.d/headers.conf Then, in order to tweak your HTTP responses either check for those lines or add them: Header unset ETagFileETag None In case that your file doesn't exist or those lines are missing, feel free to create/add them. Afterwards, check your Apache configuration syntax and restart your running instances as already shown above: # sudo apache2ctl configtestSyntax OK# sudo apache2ctl restart Add Expires headers To improve the loading performance of your website, you should take some care into the proper configuration of how to leverage the browser's ability to cache certain resources and files. This is done by adding an Expires: value to the HTTP response header. Generally speaking it is advised that you specify a near-future, read: 1 week or a little bit more, for your static content like JavaScript files or Cascading Style Sheets. One solution to adjust this is to put some instructions into the .htaccess file in the root folder of your web site. Of course, this could also be placed into a more generic location of your Apache installation but honestly, I'd like to keep this at the web site level. Following some adjustments I'm currently using on this blog site: # Turn on Expires and set default to 0ExpiresActive OnExpiresDefault A0 # Set up caching on media files for 1 year (forever?)<FilesMatch "\.(flv|ico|pdf|avi|mov|ppt|doc|mp3|wmv|wav)$">ExpiresDefault A29030400Header append Cache-Control "public"</FilesMatch> # Set up caching on media files for 1 week<FilesMatch "\.(js|css)$">ExpiresDefault A604800Header append Cache-Control "public"</FilesMatch> # Set up caching on media files for 31 days<FilesMatch "\.(gif|jpg|jpeg|png|swf)$">ExpiresDefault A2678400Header append Cache-Control "public"</FilesMatch> As we are editing the .htaccess files, it is not necessary to restart Apache. In case that your web site doesn't load anymore or you're experiencing an error while trying to restart your httpd, check that the 'expires' module is actually an enabled module: # ls -al /etc/apache2/mods-enabled/ | grep expires# sudo a2enmod expires Of course, the instructions above a re not feature complete but I hope that they might provide a better default configuration for your LAMP stack. Resume of the day Within a couple of hours, and while being occupied with an eLearning course on SQL Server 2012, I had some good fun in helping and assisting other LUGM members while they were some kilometers away at Bagatelle. According to other blog articles it seems that Nitin had quite some moments of desperation. Just for the records: At no time it was my intention to either kick his butt or pull a leg on him. Simply, providing some input based on the lessons I've learned over the last couple of years configuring Apache HTTPd and PHP. Check out the other blogs, too: LUGM mini-meetup... Epic! Superb Saturday Linux Meetup And last but not least, the man himself: The end of a new beginning Cheers, and happy community'ing! Updates Due to our weekly Code & Coffee sessions in the MSCC community, I had a chance to talk to Nitin directly and he showed me the problems directly on his machine. This led to update this article hence the paragraphs on enabling the modules 'headers' and 'expires'.

Read the article

Feedback on meeting of the Linux User Group of Mauritius

Once upon a time in a country far far away... Okay, actually it's not that bad but it has been a while since the last meeting of the Linux User Group of Mauritius (LUGM). There have been plans in the past but it never really happened. Finally, Selven took the opportunity and organised a new meetup with low administrative overhead, proper scheduling on alternative dates and a small attendee's survey on the preferred option. All the pre-work was nicely executed. First, I wasn't sure whether it would be possible to attend. Luckily I got some additional information, like children should come, too, and I was sold to this community gathering. According to other long-term members of the LUGM it was the first time 'ever' that a gathering was organised outside of Quatre Bornes, and I have to admit it was great! LUGM - user group meeting on the 15.06.2013 in L'Escalier Quick overview of Linux & the LUGM With a little bit of delay the LUGM meeting officially started with a quick overview and introduction to Linux presented by Avinash. During the session he told the audience that there had been quite some activity over the island some years ago but unfortunately it had been quiet during recent times. Of course, we also spoke about the acknowledged world dominance of Linux - thanks to Android - and the interesting possibilities for countries like Mauritius. It is known that a couple of public institutions have there back-end infrastructure running on Red Hat Linux systems but the presence on the desktop is still very low. Users are simply hanging on to Windows XP and older versions of Microsoft Office. Following the introduction of the LUGM Ajay joined into the session and it quickly changed into a panel discussion with lots of interesting questions and answers, sharing of first-hand experience either on the job or in private use of Linux, and a couple of ideas about how the LUGM could promote Linux a bit more in Mauritius. It was great to get an insight into other attendee's opinion and activities. Especially taking into consideration that I'm already using Linux since around 1996/97. Frankly speaking, I bought a SuSE 4.x distribution back in those days because I couldn't achieve certain tasks on Windows NT 4.0 without spending a fortune. OpenELEC Mediacenter Next, Selven gave us decent introduction on OpenELEC: Open Embedded Linux Entertainment Center (OpenELEC) is a small Linux distribution built from scratch as a platform to turn your computer into an XBMC media center. OpenELEC is designed to make your system boot fast, and the install is so easy that anyone can turn a blank PC into a media machine in less than 15 minutes. I didn't know about it until this presentation. In the past, I was mainly attached to Video Disk Recorder (VDR) as it allows the use of satellite receiver cards very easily. Hm, somehow I'm still missing my precious HTPC that I had to leave back in Germany years ago. It was great piece of hardware and software; self-built PC in a standard HiFi-sized (43cm) black desktop casing with 2 full-featured Hauppauge DVB-s cards, an old-fashioned Voodoo graphics card, WiFi card, Pioneer slot-in DVD drive, and fully remote controlled via infra-red thanks to Debian, VDR and LIRC. With EP Guide, scheduled recordings and general multimedia centre it offered all the necessary comfort in the living room, besides a Nintendo game console; actually a GameCube at that time... But I have to admit that putting OpenELEC on a Raspberry Pi would be a cool DIY project in the near future. LUGM - our next generation of linux users (15.06.2013) Project Evil Genius (PEG) Don't be scared of the paragraph header. Ish gave us a cool explanation why he named it PEG - Project Evil Genius; it's because of the time of the day when he was scripting down his ideas to be able to build, package and provide software applications to various Linux distributions. The main influence came from openSuSE but the platform didn't cater for his needs and ideas, so he started to work out something on his own. During his passionate session he also talked about the amazing experience he had due to other Linux users from all over the world. During the next couple of days Ish promised to put his script to GitHub... Looking forward to that. Check out Ish's personal blog over at hacklog.in. Highly recommended to read. Why India? Simply because the registration fees per year for an Indian domain are approximately 20 times less than for a Mauritian domain (.mu). Exploring the beach of L'Escalier af the meeting 'After-party' at the beach of L'Escalier Puh, after such interesting sessions, ideas around Linux and good conversation during the breaks and over lunch it was time for a little break-out. Selven suggested that we all should head down to the beach of L'Escalier and get some impressions of nature down here in the south of the island. Talking about 'beach' ;-) - absolutely not comparable to the white-sanded ones here in Flic en Flac... There are no lagoons down at the south coast of Mauriitus, and watching the breaking waves is a different experience and joy after all. Unfortunately, I was a little bit worried about the thoughtless littering at such a remote location. You have to drive on natural paths through the sugar cane fields and I was really shocked by the amount of rubbish lying around almost everywhere. Sad, really sad and it concurs with Yasir's recent article on the same topic. Resumé & outlook It was a great event. I met with new people, had some good conversations, and even my children enjoyed themselves the whole day. The location was well-chosen, enough space for each and everyone, parking spaces and even a playground for the children. Also, a big "Thank You" to Selven and his helpers for the organisation and preparation of lunch. I'm kind of sure that this was an exceptional meeting of LUGM and I'm really looking forward to the next gathering of Linux geeks. Hopefully, soon. All images are courtesy of Avinash Meetoo. More pictures are available on Flickr.

Read the article

mysql: Cannot load from mysql.proc. The table is probably corrupted

- by Alex

Mysql was started: /usr/bin/mysqld_safe --datadir=/srv/mysql/myDB --log-error=/srv/mysql/logs/mysqld-myDB.log --pid-file=/srv/mysql/pids/mysqld-myDB.pid --user=mysql --socket=/srv/mysql/sockets/mysql-myDB.sock --port=3700 but when I'm trying to do something: ERROR 1548 (HY000) at line 1: Cannot load from mysql.proc. The table is probably corrupted How to fix it? $ mysql -V mysql Ver 14.14 Distrib 5.1.58, for debian-linux-gnu (x86_64) using readline 6.2 $ lsb_release -a Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric $ sudo mysql_upgrade -uroot -p<password> --force Looking for 'mysql' as: mysql Looking for 'mysqlcheck' as: mysqlcheck Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' mysql.columns_priv OK mysql.db OK mysql.event OK mysql.func OK mysql.general_log Error : You can't use locks with log tables. status : OK mysql.help_category OK mysql.help_keyword OK mysql.help_relation OK mysql.help_topic OK mysql.host OK mysql.ndb_binlog_index OK mysql.plugin OK mysql.proc OK mysql.procs_priv OK mysql.servers OK mysql.slow_log Error : You can't use locks with log tables. status : OK mysql.tables_priv OK mysql.time_zone OK mysql.time_zone_leap_second OK mysql.time_zone_name OK mysql.time_zone_transition OK mysql.time_zone_transition_type OK mysql.user OK Running 'mysql_fix_privilege_tables'... OK $ mysqlcheck --port=3700 --socket=/srv/mysql/sockets/mysql-my-env.sock -A -udata_owner -pdata_owner <all tables> OK UPD1: for example I'm trying to remove procedure: mysql> DROP PROCEDURE IF EXISTS mysql.myproc; ERROR 1548 (HY000): Cannot load from mysql.proc. The table is probably corrupted mysql> UPD2: mysql> REPAIR TABLE mysql.proc; +------------+--------+----------+-----------------------------------------------------------------------------------------+ | Table | Op | Msg_type | Msg_text | +------------+--------+----------+-----------------------------------------------------------------------------------------+ | mysql.proc | repair | error | 1 when fixing table | | mysql.proc | repair | Error | Can't change permissions of the file '/srv/mysql/myDB/mysql/proc.MYD' (Errcode: 1) | | mysql.proc | repair | status | Operation failed | +------------+--------+----------+-----------------------------------------------------------------------------------------+ 3 rows in set (0.04 sec) This is strange, because: $ ls -l /srv/mysql/myDB/mysql/proc.MYD -rwxrwxrwx 1 mysql root 3983252 2012-02-03 22:51 /srv/mysql/myDB/mysql/proc.MYD UPD3: $ ls -la /srv/mysql/myDB/mysql total 8930 drwxrwxrwx 2 mysql root 2480 2012-02-21 13:13 . drwxrwxrwx 13 mysql root 504 2012-02-21 19:01 .. -rwxrwxrwx 1 mysql root 8820 2012-02-20 15:50 columns_priv.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 columns_priv.MYD -rwxrwxrwx 1 mysql root 4096 2012-02-20 15:50 columns_priv.MYI -rwxrwxrwx 1 mysql root 9582 2012-02-20 15:50 db.frm -rwxrwxrwx 1 mysql root 8360 2011-12-08 02:14 db.MYD -rwxrwxrwx 1 mysql root 5120 2012-02-20 15:50 db.MYI -rwxrwxrwx 1 mysql root 54 2011-11-12 15:42 db.opt -rwxrwxrwx 1 mysql root 10223 2012-02-20 15:50 event.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 event.MYD -rwxrwxrwx 1 mysql root 2048 2012-02-20 15:50 event.MYI -rwxrwxrwx 1 mysql root 8665 2012-02-20 15:50 func.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 func.MYD -rwxrwxrwx 1 mysql root 1024 2012-02-20 15:50 func.MYI -rwxrwxrwx 1 mysql root 8700 2012-02-20 15:50 help_category.frm -rwxrwxrwx 1 mysql root 21497 2011-11-12 15:42 help_category.MYD -rwxrwxrwx 1 mysql root 3072 2012-02-20 15:50 help_category.MYI -rwxrwxrwx 1 mysql root 8612 2012-02-20 15:50 help_keyword.frm -rwxrwxrwx 1 mysql root 88650 2011-11-12 15:42 help_keyword.MYD -rwxrwxrwx 1 mysql root 16384 2012-02-20 15:50 help_keyword.MYI -rwxrwxrwx 1 mysql root 8630 2012-02-20 15:50 help_relation.frm -rwxrwxrwx 1 mysql root 8874 2011-11-12 15:42 help_relation.MYD -rwxrwxrwx 1 mysql root 16384 2012-02-20 15:50 help_relation.MYI -rwxrwxrwx 1 mysql root 8770 2012-02-20 15:50 help_topic.frm -rwxrwxrwx 1 mysql root 414320 2011-11-12 15:42 help_topic.MYD -rwxrwxrwx 1 mysql root 20480 2012-02-20 15:50 help_topic.MYI -rwxrwxrwx 1 mysql root 9510 2012-02-20 15:50 host.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 host.MYD -rwxrwxrwx 1 mysql root 2048 2012-02-20 15:50 host.MYI -rwxrwxrwx 1 mysql root 8554 2011-11-12 15:42 innodb_monitor.frm -rwxrwxrwx 1 mysql root 98304 2011-11-12 15:55 innodb_monitor.ibd -rwxrwxrwx 1 mysql root 8592 2012-02-20 15:50 inventory.frm -rwxrwxrwx 1 mysql root 76 2011-11-12 15:42 inventory.MYD -rwxrwxrwx 1 mysql root 2048 2012-02-20 15:50 inventory.MYI -rwxrwxrwx 1 mysql root 8778 2012-02-20 15:50 ndb_binlog_index.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 ndb_binlog_index.MYD -rwxrwxrwx 1 mysql root 1024 2012-02-20 15:50 ndb_binlog_index.MYI -rwxrwxrwx 1 mysql root 8586 2012-02-20 15:50 plugin.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 plugin.MYD -rwxrwxrwx 1 mysql root 1024 2012-02-20 15:50 plugin.MYI -rwxrwxrwx 1 mysql root 9996 2012-02-20 15:50 proc.frm -rwxrwxrwx 1 mysql root 3983252 2012-02-03 22:51 proc.MYD -rwxrwxrwx 1 mysql root 36864 2012-02-21 13:23 proc.MYI -rwxrwxrwx 1 mysql root 8875 2012-02-20 15:50 procs_priv.frm -rwxrwxrwx 1 mysql root 1700 2011-11-12 15:42 procs_priv.MYD -rwxrwxrwx 1 mysql root 8192 2012-02-20 15:50 procs_priv.MYI -rwxrwxrwx 1 mysql root 3977704 2012-02-21 13:23 proc.TMD -rwxrwxrwx 1 mysql root 8800 2012-02-20 15:50 proxies_priv.frm -rwxrwxrwx 1 mysql root 693 2011-11-12 15:42 proxies_priv.MYD -rwxrwxrwx 1 mysql root 5120 2012-02-20 15:50 proxies_priv.MYI -rwxrwxrwx 1 mysql root 8838 2012-02-20 15:50 servers.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 servers.MYD -rwxrwxrwx 1 mysql root 1024 2012-02-20 15:50 servers.MYI -rwxrwxrwx 1 mysql root 8955 2012-02-20 15:50 tables_priv.frm -rwxrwxrwx 1 mysql root 5957 2011-11-12 15:42 tables_priv.MYD -rwxrwxrwx 1 mysql root 8192 2012-02-20 15:50 tables_priv.MYI -rwxrwxrwx 1 mysql root 8636 2012-02-20 15:50 time_zone.frm -rwxrwxrwx 1 mysql root 8624 2012-02-20 15:50 time_zone_leap_second.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 time_zone_leap_second.MYD -rwxrwxrwx 1 mysql root 1024 2012-02-20 15:50 time_zone_leap_second.MYI -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 time_zone.MYD -rwxrwxrwx 1 mysql root 1024 2012-02-20 15:50 time_zone.MYI -rwxrwxrwx 1 mysql root 8606 2012-02-20 15:50 time_zone_name.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 time_zone_name.MYD -rwxrwxrwx 1 mysql root 1024 2012-02-20 15:50 time_zone_name.MYI -rwxrwxrwx 1 mysql root 8686 2012-02-20 15:50 time_zone_transition.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 time_zone_transition.MYD -rwxrwxrwx 1 mysql root 1024 2012-02-20 15:50 time_zone_transition.MYI -rwxrwxrwx 1 mysql root 8748 2012-02-20 15:50 time_zone_transition_type.frm -rwxrwxrwx 1 mysql root 0 2011-11-12 15:42 time_zone_transition_type.MYD -rwxrwxrwx 1 mysql root 1024 2012-02-20 15:50 time_zone_transition_type.MYI -rwxrwxrwx 1 mysql root 10630 2012-02-20 15:50 user.frm -rwxrwxrwx 1 mysql root 5456 2011-11-12 21:01 user.MYD -rwxrwxrwx 1 mysql root 4096 2012-02-20 15:50 user.MYI

Read the article

Using AuthzSVNAccessFile for controlling SVN Access produces HTTP 400 Bad Request

- by meeper

I have a new repository on an existing subversion server that requires us to perform path based authorization within the repository. I found that the AuthzSVNAccessFile directive in apache is directly responsible for allowing this functionality. After fixing several other problems such as AuthzSVNAccessFile preventing SVNListParentPath from operating properly, I am left with one single problem. I can checkout, I can update, I can commit, BUT I cannot execute an SVN COPY for performing branch/tagging operations. The moment I comment out the AuthzSVNAccessFile line in the Apache config everything works as expected except the obvious path authorizations. Versions: The server OS is Debian 6.0.7 (Squeeze) Apache 2.2.16-6+squeeze11 Server Subversion 1.6.12dfsg-7 Clients are running windows Clients tried are: TortoiseSVN 1.8.2 Build 24708 64bit SVN CLI Client 1.8.3 (r1516576) Authentication is performed via AD to a Windows 2003 domain and appears to be operating normally. I have stripped out all other configurations and repository setups to produce this single configuration that reproduces the problem. Apache Configuration: <VirtualHost *:443> ServerName svn-test.company.com ServerAlias /svn-test ServerAdmin [email protected] SSLEngine On SSLCertificateFile /etc/apache2/apache.pem ErrorLog /var/log/apache2/svn-test_error.log LogLevel warn CustomLog /var/log/apache2/svn-test_access.log combined ServerSignature On # Repository Access to all Repositories <Location "/"> DAV svn SVNParentPath /var/svn SVNListParentPath on AuthBasicProvider ldap AuthType Basic AuthzLDAPAuthoritative Off AuthName "Subversion Test Repository System" AuthLDAPURL "ldap://adserver.company.com:389/DC=corp,DC=company,DC=com?sAMAccountName?sub?(objectClass=*)" NONE AuthLDAPBindDN "CN=service_account,OU=ServiceIDs,OU=corp,OU=Delegated,DC=na,DC=corp,DC=company,DC=com" AuthLDAPBindPassword service_account_password Require valid-user SSLRequireSSL </Location> # <LocationMatch /.+> is a really dirty trick to make listing of repositories work # http://d.hatena.ne.jp/shimonoakio/20080130/1201686016 <LocationMatch /.+> AuthzSVNAccessFile /etc/apache2/svn_path_auth </LocationMatch> </VirtualHost> SVN Access File: [/] * = rw The repository used (AuthTestBasic) consists of the following directory structure and contains no externals (this is a literal listing, not an example): / /branches/ /tags/ /trunk/ /trunk/somefile.txt Tortoise produces the following error during a tag operation in it's tag result window: Adding directory failed: COPY on /authtestbasic/!svn/bc/2/trunk (400 Bad Request) The svn.exe CLI client produces the following error: C:\Users\e20epkt>svn copy https://servername/authtestbasic/trunk https://servername/authtestbasic/tags/tag1 -m "svn cli client" svn: E175002: Adding directory failed: COPY on /authtestbasic/!svn/bc/2/trunk (400 Bad Request) The Apache error log has nothing in it, however the apache access log has the following in it (IP addresses and usernames changed obviously): 10.1.2.100 - - [17/Oct/2013:11:53:40 -0700] "OPTIONS /authtestbasic/trunk HTTP/1.1" 401 2595 "-" "SVN/1.8.3 (x64-microsoft-windows) serf/1.3.1 TortoiseSVN-1.8.2.24708" 10.1.2.100 - myuseraccount [17/Oct/2013:11:53:40 -0700] "OPTIONS /authtestbasic/trunk HTTP/1.1" 200 996 "-" "SVN/1.8.3 (x64-microsoft-windows) serf/1.3.1 TortoiseSVN-1.8.2.24708" 10.1.2.100 - myuseraccount [17/Oct/2013:11:53:40 -0700] "OPTIONS /authtestbasic/trunk HTTP/1.1" 200 884 "-" "SVN/1.8.3 (x64-microsoft-windows) serf/1.3.1 TortoiseSVN-1.8.2.24708" 10.1.2.100 - myuseraccount [17/Oct/2013:11:53:40 -0700] "PROPFIND /authtestbasic/trunk HTTP/1.1" 207 692 "-" "SVN/1.8.3 (x64-microsoft-windows) serf/1.3.1 TortoiseSVN-1.8.2.24708" 10.1.2.100 - myuseraccount [17/Oct/2013:11:53:40 -0700] "PROPFIND /authtestbasic/!svn/vcc/default HTTP/1.1" 207 596 "-" "SVN/1.8.3 (x64-microsoft-windows) serf/1.3.1 TortoiseSVN-1.8.2.24708" 10.1.2.100 - myuseraccount [17/Oct/2013:11:53:40 -0700] "REPORT /authtestbasic/!svn/bc/0/trunk HTTP/1.1" 404 580 "-" "SVN/1.8.3 (x64-microsoft-windows) serf/1.3.1 TortoiseSVN-1.8.2.24708" 10.1.2.100 - myuseraccount [17/Oct/2013:11:53:40 -0700] "PROPFIND /authtestbasic/!svn/vcc/default HTTP/1.1" 207 596 "-" "SVN/1.8.3 (x64-microsoft-windows) serf/1.3.1 TortoiseSVN-1.8.2.24708" 10.1.2.100 - myuseraccount [17/Oct/2013:11:53:40 -0700] "REPORT /authtestbasic/!svn/bc/2/trunk HTTP/1.1" 200 674 "-" "SVN/1.8.3 (x64-microsoft-windows) serf/1.3.1 TortoiseSVN-1.8.2.24708" 10.1.2.100 - myuseraccount [17/Oct/2013:11:53:40 -0700] "PROPFIND /authtestbasic/!svn/bc/2/trunk HTTP/1.1" 207 548 "-" "SVN/1.8.3 (x64-microsoft-windows) serf/1.3.1 TortoiseSVN-1.8.2.24708" 10.1.2.100 - myuseraccount [17/Oct/2013:11:53:40 -0700] "PROPFIND /authtestbasic/tags/tag1 HTTP/1.1" 404 580 "-" "SVN/1.8.3 (x64-microsoft-windows) serf/1.3.1 TortoiseSVN-1.8.2.24708" 10.1.2.100 - myuseraccount [17/Oct/2013:11:53:40 -0700] "MKACTIVITY /authtestbasic/!svn/act/f1e9dc07-fb5e-5a41-ac22-907705ef6e5e HTTP/1.1" 201 708 "-" "SVN/1.8.3 (x64-microsoft-windows) serf/1.3.1 TortoiseSVN-1.8.2.24708" 10.1.2.100 - myuseraccount [17/Oct/2013:11:53:40 -0700] "PROPFIND /authtestbasic/tags HTTP/1.1" 207 580 "-" "SVN/1.8.3 (x64-microsoft-windows) serf/1.3.1 TortoiseSVN-1.8.2.24708" 10.1.2.100 - myuseraccount [17/Oct/2013:11:53:40 -0700] "CHECKOUT /authtestbasic/!svn/vcc/default HTTP/1.1" 201 708 "-" "SVN/1.8.3 (x64-microsoft-windows) serf/1.3.1 TortoiseSVN-1.8.2.24708" 10.1.2.100 - myuseraccount [17/Oct/2013:11:53:40 -0700] "PROPPATCH /authtestbasic/!svn/wbl/f1e9dc07-fb5e-5a41-ac22-907705ef6e5e/2 HTTP/1.1" 207 596 "-" "SVN/1.8.3 (x64-microsoft-windows) serf/1.3.1 TortoiseSVN-1.8.2.24708" 10.1.2.100 - myuseraccount [17/Oct/2013:11:53:40 -0700] "CHECKOUT /authtestbasic/!svn/ver/1/tags HTTP/1.1" 201 724 "-" "SVN/1.8.3 (x64-microsoft-windows) serf/1.3.1 TortoiseSVN-1.8.2.24708" 10.1.2.100 - myuseraccount [17/Oct/2013:11:53:40 -0700] "COPY /authtestbasic/!svn/bc/2/trunk HTTP/1.1" 400 596 "-" "SVN/1.8.3 (x64-microsoft-windows) serf/1.3.1 TortoiseSVN-1.8.2.24708" 10.1.2.100 - myuseraccount [17/Oct/2013:11:53:40 -0700] "DELETE /authtestbasic/!svn/act/f1e9dc07-fb5e-5a41-ac22-907705ef6e5e HTTP/1.1" 204 1956 "-" "SVN/1.8.3 (x64-microsoft-windows) serf/1.3.1 TortoiseSVN-1.8.2.24708" You'll see that the second to last line contains the COPY command with the HTTP 400 response, however, there doesn't appear to be any indication as to why. Please note that, while yes this is a test repository on a test server, I am experiencing this same issue in this test setup where I have eliminated all other possible causes (mixed repository configurations, externals, etc). I have also confirmed that all files for the repository (/var/svn/authtestbasic) are owned by the Apache user www-data.

Read the article

Openswan + xl2tpd connections time out after a while

- by Halfgaar

I have a non-NATed Openswan+xl2tpd server (Ubuntu 12.04), to which I connect with a Windows 8 behind NAT. The client loses its connection after a while of doing nothing (between 30 and 60 minutes, but I didn't time it). The client doesn't have enabled that it should kill inactive connections. Nor does it ever go into sleep mode. I also tried setting the kill-after-time to 24 hours, but that didn't help. The NAT router behind which the client located is Debian Linux, and its router is a Cisco which connects us directly to the data center where the server is. None of our other connections, like SSH, get dropped with inactivity (because of cheap routers). I did however try turning on the keepalives in /etc/ipsec.conf: config setup (...snip...) nat_traversal=yes force_keepalive=yes keep_alive=10 but that didn't help. As you can see in the config later, dead peer detection's action is clear. That would be a first suggestion to fix, but I need clear, because people will be connecting from everwhere but the kitchen sink. Besides, as I said, in the test setup I have now, I can't see any device killing its connection. (edit: 'restart' also has the same effect) These are of one time it happened: Jul 18 16:18:06 host xl2tpd[1918]: Maximum retries exceeded for tunnel 49070. Closing. Jul 18 16:18:06 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 18359 Jul 18 16:18:06 host xl2tpd[1918]: Connection 4 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 16:18:11 host xl2tpd[1918]: Unable to deliver closing message for tunnel 49070. Destroying anyway. and these on another: Jul 18 17:44:39 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 xl2tpd[1918]: last message repeated 4 times Jul 18 17:44:43 host xl2tpd[1918]: Maximum retries exceeded for tunnel 10918. Closing. Jul 18 17:44:43 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 26338 Jul 18 17:44:43 host xl2tpd[1918]: Connection 6 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 17:44:44 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:48 xl2tpd[1918]: last message repeated 3 times Jul 18 17:44:48 host xl2tpd[1918]: Unable to deliver closing message for tunnel 10918. Destroying anyway. Jul 18 17:44:59 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:44:59 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:09 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:09 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:19 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:19 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:29 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:29 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:39 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:39 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:49 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:49 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Versions: Ubuntu 12.04 Openswan: 2.6.37-1 xl2tpd: 3.1+dfsg-1 kernel: 3.2.0-49-generic configs: /etc/ipsec.conf: version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:!10.152.2.0/24 oe=off protostack=netkey force_keepalive=yes keep_alive=10 conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=2 rekey=no dpddelay=30 dpdtimeout=120 dpdaction=clear ikelifetime=8h keylife=1h type=transport left=%defaultroute leftprotoport=17/1701 right=%any rightprotoport=17/%any /etc/xl2tpd/xl2tpd.conf [global] ipsec saref = no [lns default] ip range = 10.152.2.2-10.152.2.254 local ip = 10.152.2.1 refuse chap = yes refuse pap = yes require authentication = yes ppp debug = no pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd: require-mschap-v2 refuse-mschap ms-dns 10.152.2.1 asyncmap 0 auth crtscts idle 1800 mtu 1200 mru 1200 lock hide-password local #debug name l2tpd proxyarp lcp-echo-interval 30 lcp-echo-failure 4

Read the article

Using nginx + wordpress with all wordpress files in a subdirectory

- by GorillaPatch

My setup I am running nginx 0.7.67 on Debian Lenny as a webserver, not as a reverse proxy. I am using php5-fpm to handle my PHP requests, which works fine. My aim I would like to have a wordpress installation that is layed out as described here clean wordpress subversion installation. I would like to have a clean wordpress installation without cluttering my server root directory with all the wordpress files. That means that my wordpress installation would be in /wordpress and my themes and plugins inside /wordpress-content. The important point however is that if you navigate to my domain www.example.com then you would be taken directly to the wordpress blog, without having to specify the subdirectory where wordpress lives. I found a how-to at the nginx site installing wordpress but unfortunately this is for moving the entire wordpress directory instead of redirecting the traffic to it. I tried with the following configuration: example.conf in sites-available server { listen 80; server_name www.example.com; access_log /var/log/nginx/www.example.com.access.log main; root /var/www/example/htdocs; location / { try_files $uri $uri/ /wordpress/index.php?q=$uri&$args; } include /etc/nginx/includes/php5-wordpress.conf; include /etc/nginx/includes/deny.conf; } php5-wordpress.conf in includes location /wordpress { try_files $uri $uri/ /wordpress/index.php?q=$uri&$args; } location ~ \.php$ { fastcgi_split_path_info ^(/wordpress)(/.*)$; fastcgi_ignore_client_abort on; fastcgi_pass unix:/var/run/php5-fpm.socket; fastcgi_index index.php; include /etc/nginx/fastcgi_params; } fastcgi_params fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200; The problems I have is that when I go to the adress "http://www.example.com" I get a 403 error as I disabled directory listing. Instead I would like my wordpress to appear then. Also if I navigate to "http://www.example.com/wordpress" I get a "file not found" error. However if I comment out the fastcgi_split_path_info line in my php5-wordpress.conf at least the wordpress installation works inside /wordpress. I need help how to debug this behavior or where I can find more information. Thanks alot. Update: Added error log entry for the 403 error. in the error.log I get the following entry for the 403 error: 2010/12/11 07:54:24 [error] 9496#0: *1 directory index of "/var/www/example/htdocs/" is forbidden, client: XXX.XXX.XXX.XXX, server: www.example.com, request: "GET / HTTP/1.1", host: "www.example.com" Update 2: Added the nginx.conf below: user www-data; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] $status ' '"$request" $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log; sendfile on; #tcp_nopush on; keepalive_timeout 65; tcp_nodelay on; gzip on; index index.php index.html; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; }

Read the article

Upon reboot, Linux software raid fails to include one device of a RAID1 array

- by user1389890

One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64 (Debian Squeeze). Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the result of $ cat /etc/mdadm/mdadm.conf: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions?

Read the article

Postfix "warning: cannot get RSA private key from file"

- by phew

I just followed this tutorial to set up a postfix mailserver with dovecot and mysql as backend for virtual users. Now I got the most parts working, I can connect to pop3 pop3s imap and imaps. Using echo TEST-MAIL | mail [email protected] works fine, when I log into my hotmail account it shows the email. It also works in reverse hence my MX entry for mydomain.com finally has been propagated, so I am being able to receive emails sent from [email protected] to [email protected] and view them in Thunderbird using STARTTLS via IMAP. Doing a bit more research after I got the error message "5.7.1 : Relay access denied" when trying to send mails to [email protected] using Thunderbird being logged into [email protected], I figured out that my server was acting as an "Open Mail Relay", which - ofcourse - is a bad thing. Digging more into the optional parts of the tutorial like shown workaround.org/comment/2536 and workaround.org/ispmail/squeeze/postfix-smtp-auth I decided to complete these steps aswell to be able to send mails via [email protected] through Mozilla Thunderbird, not getting the error message "5.7.1 : Relay access denied" anymore (as common mailservers reject open relayed emails). But now I ran into an error trying to get postfix working with SMTPS, in /var/log/mail.log it reads Sep 28 17:29:34 domain postfix/smtpd[20251]: warning: cannot get RSA private key from file /etc/ssl/certs/postfix.pem: disabling TLS support Sep 28 17:29:34 domain postfix/smtpd[20251]: warning: TLS library problem: 20251:error:0906D06C:PEM routines:PEM_read_bio:no start line:pem_lib.c:650:Expecting: ANY PRIVATE KEY: Sep 28 17:29:34 domain postfix/smtpd[20251]: warning: TLS library problem: 20251:error:140B0009:SSL routines:SSL_CTX_use_PrivateKey_file:PEM lib:ssl_rsa.c:669: That error is logged right after I try to send a mail from my newly installed mailserver using SMTP SSL/TLS via port 465 in Thunderbird. Thunderbird then tells me a timeout occured. Google has a few results concerning that problem, yet I couldn't get it working with any of those. I would link some of them here but as a new user I am only allowed to use two hyperlinks. My /etc/postfix/master.cf looks like smtp inet n - - - - smtpd smtps inet n - - - - smtpd -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes and nmap tells me PORT STATE SERVICE [...] 465/tcp open smtps [...] my /etc/postfix/main.cf looks like smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no append_dot_mydomain = no readme_directory = no #smtpd_tls_cert_file = /etc/ssl/certs/postfix.pem #default postfix generated #smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key #default postfix generated smtpd_tls_cert_file = /etc/ssl/certs/postfix.pem smptd_tls_key_file = /etc/ssl/private/postfix.pem smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smptd_sasl_auth_enable = yes smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination myhostname = mydomain.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = localhost.com, localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual-mailbox-maps.cf virtual_alias_maps = mysql:/etc/postfix/mysql-virtual-alias-maps.cf virtual_transport = dovecot dovecot_destination_recipient_limit = 1 mailbox_command = /usr/lib/dovecot/deliver The *.pem files were created like described in the tutorial above, using Postfix To create a certificate to be used by Postfix use: openssl req -new -x509 -days 3650 -nodes -out /etc/ssl/certs/postfix.pem -keyout /etc/ssl/private/postfix.pem Do not forget to set the permissions on the private key so that no unauthorized people can read it: chmod o= /etc/ssl/private/postfix.pem You will have to tell Postfix where to find your certificate and private key because by default it will look for a dummy certificate file called "ssl-cert-snakeoil": postconf -e smtpd_tls_cert_file=/etc/ssl/certs/postfix.pem postconf -e smtpd_tls_key_file=/etc/ssl/private/postfix.pem I think I don't have to include /etc/dovecot/dovecot.conf here, as login via imaps and pop3s works fine according to the logs. Only problem is making postfix properly use the self-generated, self-signed certificates. Any help appreciated! EDIT: I just tried this different tutorial on generating a self-signed certificate for postfix, still getting the same error. I really don't know what else to test. I also did check for the SSL libraries, but all seems to be fine: root@domain:~# ldd /usr/sbin/postfix linux-vdso.so.1 => (0x00007fff91b25000) libpostfix-global.so.1 => /usr/lib/libpostfix-global.so.1 (0x00007f6f8313d000) libpostfix-util.so.1 => /usr/lib/libpostfix-util.so.1 (0x00007f6f82f07000) libssl.so.0.9.8 => /usr/lib/libssl.so.0.9.8 (0x00007f6f82cb1000) libcrypto.so.0.9.8 => /usr/lib/libcrypto.so.0.9.8 (0x00007f6f82910000) libsasl2.so.2 => /usr/lib/libsasl2.so.2 (0x00007f6f826f7000) libdb-4.8.so => /usr/lib/libdb-4.8.so (0x00007f6f8237c000) libnsl.so.1 => /lib/libnsl.so.1 (0x00007f6f82164000) libresolv.so.2 => /lib/libresolv.so.2 (0x00007f6f81f4e000) libc.so.6 => /lib/libc.so.6 (0x00007f6f81beb000) libdl.so.2 => /lib/libdl.so.2 (0x00007f6f819e7000) libz.so.1 => /usr/lib/libz.so.1 (0x00007f6f817d0000) libpthread.so.0 => /lib/libpthread.so.0 (0x00007f6f815b3000) /lib64/ld-linux-x86-64.so.2 (0x00007f6f83581000) After following Ansgar Wiechers instructions its finally working. postconf -n contained the lines as it should. The certificate/key check via openssl did show that both files are valid. So it indeed has been a permissions problem! Didn't know that chown'ing the /etc/ssl/*/postfix.pem files to postfix:postfix is not enough for postfix to read the files.

Read the article

Confirm disk is broken when it passes all diagnostics

- by Halfgaar

I have a system with a potentially broken disk, but the disk passes all manner of diagnostics. I have been unable to confirm that the disk is broken. What are my options? I could just replace the disk, but because this situation is very similar to another more severe situation I have (long story), I'd like to actually make a proper diagnosis as opposed to randomly binning hardware. The issue and history is this: I had a Debian Linux PC (500 MHz P3) acting as router, nagios and munin. It crashed every couple of weeks. No logs or dmesg could be obtained (because it's an old Compaq that only boots when you configure it as keyboardless, making connecting a keyboard later, once it's booted, impossible). At the time, I just replaced the computer with another Compaq (P4 2.4 GHz) because I thought the hardware was faulty. However, it still crashed every couple of weeks. the difference is that on this computer, I can still SSH into it. It gives all kinds of errors on hda. I'd like to confirm that the disk is broken, but nothing I do confirms this: SMART error logs shows no errors. Normally when a disk starts acting up, SMART my pass, but it still records a read-error in the error log. SMART self-test (smartctl -t long /dev/sda) completes without errors. re-allocated sector count (a tell-tale parameter) has been 31 all its life, even when the disk was still in use in my desktop PC years ago, and it still is. The figure never changed. dd if=/dev/sda of=/dev/null bs=4096 passes with flying colors. What else can I do to assess the health of the drive? Again, this is not about making this router fully functional again, this is a disk forensic question, because it just so happens that I have another server that potentially has the same problem, and knowing the answer to this will possibly help me greatly. For the record, below are logs and such. This is the smartctl -a output: smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST3120026A Serial Number: 5JT1CLQM Firmware Version: 3.06 User Capacity: 120,034,123,776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Mon Jul 1 21:18:33 2013 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 24) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 050 046 006 Pre-fail Always - 47766662 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 10 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 31 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 820305 9 Power_On_Hours 0x0032 048 048 000 Old_age Always - 46373 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 605 194 Temperature_Celsius 0x0022 036 065 000 Old_age Always - 36 195 Hardware_ECC_Recovered 0x001a 050 046 000 Old_age Always - 47766662 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 196 000 Old_age Always - 6 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 80% 46361 - # 2 Extended offline Completed without error 00% 46358 - # 3 Short offline Completed without error 00% 12046 - # 4 Extended offline Completed without error 00% 10472 - # 5 Short offline Completed without error 00% 10471 - # 6 Short offline Completed without error 00% 10471 - # 7 Short offline Completed without error 00% 6770 - # 8 Extended offline Aborted by host 90% 5958 - # 9 Extended offline Aborted by host 90% 5951 - #10 Short offline Completed without error 00% 5024 - #11 Extended offline Aborted by host 80% 5024 - #12 Short offline Completed without error 00% 3697 - #13 Short offline Completed without error 00% 237 - #14 Short offline Completed without error 00% 145 - #15 Short offline Completed without error 00% 69 - #16 Extended offline Completed without error 00% 68 - #17 Short offline Completed without error 00% 66 - #18 Short offline Completed without error 00% 49 - #19 Short offline Completed without error 00% 29 - #20 Short offline Completed without error 00% 29 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. And this is the dmesg error when it has crashed (which repeats for a bunch of different sectors): [1755091.211136] sd 0:0:0:0: [sda] Unhandled error code [1755091.211144] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [1755091.211151] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 08 fe ad 38 00 00 08 00 [1755091.211166] end_request: I/O error, dev sda, sector 150908216

Read the article

UnicodeEncodeError when uploading files in Django admin

- by Samuel Linde

Note: I asked this question on StackOverflow, but I realize this might be a more proper place to ask this kind of question. I'm trying to upload a file called 'Testaråäö.txt' via the Django admin app. I'm running Django 1.3.1 with Gunicorn 0.13.4 and Nginx 0.7.6.7 on a Debian 6 server. Database is PostgreSQL 8.4.9. Other Unicode data is saved to the database with no problem, so I guess the problem must be with the filesystem somehow. I've set http { charset utf-8; } in my nginx.conf. LC_ALL and LANG is set to 'sv_SE.UTF-8'. Running 'locale' verifies this. I even tried setting LC_ALL and LANG in my nginx init script just to make sure locale is set properly. Here's the traceback: Traceback (most recent call last): File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/core/handlers/base.py", line 111, in get_response response = callback(request, *callback_args, **callback_kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/contrib/admin/options.py", line 307, in wrapper return self.admin_site.admin_view(view)(*args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/utils/decorators.py", line 93, in _wrapped_view response = view_func(request, *args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/views/decorators/cache.py", line 79, in _wrapped_view_func response = view_func(request, *args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/contrib/admin/sites.py", line 197, in inner return view(request, *args, **kwargs) File "/srv/django/letebo/app/cms/admin.py", line 81, in change_view return super(PageAdmin, self).change_view(request, obj_id) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/utils/decorators.py", line 28, in _wrapper return bound_func(*args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/utils/decorators.py", line 93, in _wrapped_view response = view_func(request, *args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/utils/decorators.py", line 24, in bound_func return func(self, *args2, **kwargs2) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/transaction.py", line 217, in inner res = func(*args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/contrib/admin/options.py", line 985, in change_view self.save_formset(request, form, formset, change=True) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/contrib/admin/options.py", line 677, in save_formset formset.save() File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/forms/models.py", line 482, in save return self.save_existing_objects(commit) + self.save_new_objects(commit) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/forms/models.py", line 613, in save_new_objects self.new_objects.append(self.save_new(form, commit=commit)) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/forms/models.py", line 717, in save_new obj.save() File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/base.py", line 460, in save self.save_base(using=using, force_insert=force_insert, force_update=force_update) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/base.py", line 504, in save_base self.save_base(cls=parent, origin=org, using=using) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/base.py", line 543, in save_base for f in meta.local_fields if not isinstance(f, AutoField)] File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/fields/files.py", line 255, in pre_save file.save(file.name, file, save=False) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/fields/files.py", line 92, in save self.name = self.storage.save(name, content) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/core/files/storage.py", line 48, in save name = self.get_available_name(name) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/core/files/storage.py", line 74, in get_available_name while self.exists(name): File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/core/files/storage.py", line 218, in exists return os.path.exists(self.path(name)) File "/srv/.virtualenvs/letebo/lib/python2.6/genericpath.py", line 18, in exists st = os.stat(path) UnicodeEncodeError: 'ascii' codec can't encode characters in position 52-54: ordinal not in range(128) I tried running Gunicorn with debugging turned on, and the file uploads without any problem at all. I suppose this must mean that the issue is with Nginx. Still beats me where to look, though. Here are the raw response headers from Gunicorn and Nginx, if it makes any sense: Gunicorn: HTTP/1.1 302 FOUND Server: gunicorn/0.13.4 Date: Thu, 09 Feb 2012 14:50:27 GMT Connection: close Transfer-Encoding: chunked Expires: Thu, 09 Feb 2012 14:50:27 GMT Vary: Cookie Last-Modified: Thu, 09 Feb 2012 14:50:27 GMT Location: http://my-server.se:8000/admin/cms/page/15/ Cache-Control: max-age=0 Content-Type: text/html; charset=utf-8 Set-Cookie: messages="yada yada yada"; Path=/ Nginx: HTTP/1.1 500 INTERNAL SERVER ERROR Server: nginx/0.7.67 Date: Thu, 09 Feb 2012 14:50:57 GMT Content-Type: text/html; charset=utf-8 Transfer-Encoding: chunked Connection: close Vary: Cookie 500 UPDATE: Both locale.getpreferredencoding() and sys.getfilesystemencoding() outputs 'UTF-8'. locale.getdefaultlocale() outputs ('sv_SE', 'UTF8'). This seem correct to me, so I'm still not sure why I keep getting these errors.

Read the article

500 Internal Server Error with PHP application

- by James

I have written a PHP application using Windows and XAMPP. I've been trying to run it on Ubuntu 10.10 with Lighttpd 1.4.26. Parts of the application work fine, but whenever I try to log in, I get a 500 - Internal Server Error page. The only thing that shows up in /var/log/lighttpd/error.log is 2011-02-25 13:43:13: (mod_fastcgi.c.2582) unexpected end-of-file (perhaps the fastcgi process died): pid: 1169 socket: unix:/tmp/php.socket-0 2011-02-25 13:43:13: (mod_fastcgi.c.3367) response not received, request sent: 1596 on socket: unix:/tmp/php.socket-0 for /~denton/customer-facing-portal/index.php?, closing connection If I had any output whatsoever from PHP, this would be a lot easier to debug. Any ideas on how to get some? Here is my /etc/lighttpd/lighttpd.conf file: # Debian lighttpd configuration file # ############ Options you really have to take care of #################### ## modules to load server.modules = ( "mod_alias", "mod_compress", # "mod_rewrite", # "mod_redirect", # "mod_usertrack", # "mod_expire", # "mod_flv_streaming", # "mod_evasive", "mod_setenv" ) ## a static document-root, for virtual-hosting take look at the ## server.virtual-* options server.document-root = "/var/www/" ## where to upload files to, purged daily. server.upload-dirs = ( "/var/cache/lighttpd/uploads" ) ## where to send error-messages to server.errorlog = "/var/log/lighttpd/error.log" ## files to check for if .../ is requested index-file.names = ( "index.php", "index.html", "index.htm", "default.htm", "index.lighttpd.html" ) ## Use the "Content-Type" extended attribute to obtain mime type if possible # mimetype.use-xattr = "enable" ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) ######### Options that are good to be but not neccesary to be changed ####### ## Use ipv6 only if available. (disabled for while, check #560837) #include_shell "/usr/share/lighttpd/use-ipv6.pl" ## bind to port (default: 80) # server.port = 81 ## bind to localhost only (default: all interfaces) ## server.bind = "localhost" ## error-handler for status 404 #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## to help the rc.scripts server.pid-file = "/var/run/lighttpd.pid" ## ## Format: <errorfile-prefix><status>.html ## -> ..../status-404.html for 'File not found' #server.errorfile-prefix = "/var/www/" ## virtual directory listings dir-listing.encoding = "utf-8" server.dir-listing = "enable" ### only root can use these options # # chroot() to directory (default: no chroot() ) #server.chroot = "/" ## change uid to <uid> (default: don't change) server.username = "www-data" ## change gid to <gid> (default: don't change) server.groupname = "www-data" #### compress module compress.cache-dir = "/var/cache/lighttpd/compress/" compress.filetype = ("text/plain", "text/html", "application/x-javascript", "text/css") #### url handling modules (rewrite, redirect, access) # url.rewrite = ( "^/$" => "/server-status" ) # url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" ) #### expire module # expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "access plus 1 seconds 2 minutes") #### external configuration files ## mimetype mapping include_shell "/usr/share/lighttpd/create-mime.assign.pl" ## load enabled configuration files, ## read /etc/lighttpd/conf-available/README first include_shell "/usr/share/lighttpd/include-conf-enabled.pl" ## Set environment variables setenv.add-environment = ( "DB_URL__DEMO" => "192.168.1.231", "DB_NAME_DEMO" => "demo", "DB_USER_DEMO" => "user", "DB_PASS_DEMO" => "password", "DB_AGENCY_DEMO" => "demo" ) Here is my /etc/php5/cgi/php.ini file (sans 1641 lines of comments): [PHP] register_long_arrays = Off short_open_tag = Off engine = On short_open_tag = Off asp_tags = Off precision = 14 y2k_compliance = On output_buffering = 4096 zlib.output_compression = Off implicit_flush = Off unserialize_callback_func = serialize_precision = 100 allow_call_time_pass_reference = Off safe_mode = Off safe_mode_gid = Off safe_mode_include_dir = safe_mode_exec_dir = safe_mode_allowed_env_vars = PHP_ safe_mode_protected_env_vars = LD_LIBRARY_PATH disable_functions = disable_classes = expose_php = On max_execution_time = 30 max_input_time = 60 memory_limit = 128M error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT display_errors = On display_startup_errors = On log_errors = On log_errors_max_len = 1024 ignore_repeated_errors = Off ignore_repeated_source = Off report_memleaks = On track_errors = On html_errors = On variables_order = "GPCS" request_order = "GP" register_globals = Off register_long_arrays = Off register_argc_argv = Off auto_globals_jit = On post_max_size = 8M magic_quotes_gpc = Off magic_quotes_runtime = Off magic_quotes_sybase = Off auto_prepend_file = auto_append_file = default_mimetype = "text/html" doc_root = user_dir = enable_dl = Off cgi.fix_pathinfo=1 file_uploads = On upload_max_filesize = 2M max_file_uploads = 20 allow_url_fopen = On allow_url_include = Off default_socket_timeout = 60 [Date] date.timezone = "America/Chicago" [filter] [iconv] [intl] [sqlite] [sqlite3] [Pcre] [Pdo] [Pdo_mysql] pdo_mysql.cache_size = 2000 pdo_mysql.default_socket= [Phar] [Syslog] define_syslog_variables = Off [mail function] SMTP = localhost smtp_port = 25 mail.add_x_header = On [SQL] sql.safe_mode = Off [ODBC] odbc.allow_persistent = On odbc.check_persistent = On odbc.max_persistent = -1 odbc.max_links = -1 odbc.defaultlrl = 4096 odbc.defaultbinmode = 1 [Interbase] ibase.allow_persistent = 1 ibase.max_persistent = -1 ibase.max_links = -1 ibase.timestampformat = "%Y-%m-%d %H:%M:%S" ibase.dateformat = "%Y-%m-%d" ibase.timeformat = "%H:%M:%S" [MySQL] mysql.allow_local_infile = On mysql.allow_persistent = On mysql.cache_size = 2000 mysql.max_persistent = -1 mysql.max_links = -1 mysql.default_port = mysql.default_socket = mysql.default_host = mysql.default_user = mysql.default_password = mysql.connect_timeout = 60 mysql.trace_mode = Off [MySQLi] mysqli.max_persistent = -1 mysqli.allow_persistent = On mysqli.max_links = -1 mysqli.cache_size = 2000 mysqli.default_port = 3306 mysqli.default_socket = mysqli.default_host = mysqli.default_user = mysqli.default_pw = mysqli.reconnect = Off [mysqlnd] mysqlnd.collect_statistics = On mysqlnd.collect_memory_statistics = Off [OCI8] [PostgresSQL] pgsql.allow_persistent = On pgsql.auto_reset_persistent = Off pgsql.max_persistent = -1 pgsql.max_links = -1 pgsql.ignore_notice = 0 pgsql.log_notice = 0 [Sybase-CT] sybct.allow_persistent = On sybct.max_persistent = -1 sybct.max_links = -1 sybct.min_server_severity = 10 sybct.min_client_severity = 10 [bcmath] bcmath.scale = 0 [browscap] [Session] session.save_handler = files session.use_cookies = 1 session.use_only_cookies = 1 session.name = PHPSESSID session.auto_start = 0 session.cookie_lifetime = 0 session.cookie_path = / session.cookie_domain = session.cookie_httponly = session.serialize_handler = php session.gc_probability = 1 session.gc_divisor = 1000 session.gc_maxlifetime = 1440 session.bug_compat_42 = Off session.bug_compat_warn = Off session.referer_check = session.entropy_length = 0 session.cache_limiter = nocache session.cache_expire = 180 session.use_trans_sid = 0 session.hash_function = 0 session.hash_bits_per_character = 5 url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" [MSSQL] mssql.allow_persistent = On mssql.max_persistent = -1 mssql.max_links = -1 mssql.min_error_severity = 10 mssql.min_message_severity = 10 mssql.compatability_mode = Off mssql.secure_connection = Off [Assertion] [COM] [mbstring] [gd] [exif] [Tidy] tidy.clean_output = Off [soap] soap.wsdl_cache_enabled=1 soap.wsdl_cache_dir="/tmp" soap.wsdl_cache_ttl=86400 soap.wsdl_cache_limit = 5 [sysvshm] [ldap] ldap.max_links = -1 [mcrypt] [dba] Update: here is /etc/lighttpd/conf-enabled/15-fastcgi-php.conf As far as I know, it's just the default config file the Ubuntu package installed. ## FastCGI programs have the same functionality as CGI programs, ## but are considerably faster through lower interpreter startup ## time and socketed communication ## ## Documentation: /usr/share/doc/lighttpd-doc/fastcgi.txt.gz ## http://redmine.lighttpd.net/projects/lighttpd/wiki/Docs:ConfigurationOptions#mod_fastcgi-fastcgi ## Start an FastCGI server for php (needs the php5-cgi package) fastcgi.server += ( ".php" => (( "bin-path" => "/usr/bin/php-cgi", "socket" => "/tmp/php.socket", "max-procs" => 1, "idle-timeout" => 20, "bin-environment" => ( "PHP_FCGI_CHILDREN" => "4", "PHP_FCGI_MAX_REQUESTS" => "10000" ), "bin-copy-environment" => ( "PATH", "SHELL", "USER" ), "broken-scriptfilename" => "enable" )) )

Read the article

Proper network configuration for a KVM guest to be on the same networks at the host

- by Steve Madsen

I am running a Debian Linux server on Lenny. Within it, I am running another Lenny instance using KVM. Both servers are externally available, with public IPs, as well as a second interface with private IPs for the LAN. Everything works fine, except the VM sees all network traffic as originating from the host server. I suspect this might have something to do with the iptables-based firewall I'm running on the host. What I'd like to figure out is: how to I properly configure the host's networking such that all of these requirements are met? Both host and VMs have 2 network interfaces (public and private). Both host and VMs can be independently firewalled. Ideally, VM traffic does not have to traverse the host firewall. VMs see real remote IP addresses, not the host's. Currently, the host's network interfaces are configured as bridges. eth0 and eth1 do not have IP addresses assigned to them, but br0 and br1 do. /etc/network/interfaces on the host: # The primary network interface auto br1 iface br1 inet static address 24.123.138.34 netmask 255.255.255.248 network 24.123.138.32 broadcast 24.123.138.39 gateway 24.123.138.33 bridge_ports eth1 bridge_stp off auto br1:0 iface br1:0 inet static address 24.123.138.36 netmask 255.255.255.248 network 24.123.138.32 broadcast 24.123.138.39 # Internal network auto br0 iface br0 inet static address 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 bridge_ports eth0 bridge_stp off This is the libvirt/qemu configuration file for the VM: <domain type='kvm'> <name>apps</name> <uuid>636b6620-0949-bc88-3197-37153b88772e</uuid> <memory>393216</memory> <currentMemory>393216</currentMemory> <vcpu>1</vcpu> <os> <type arch='i686' machine='pc'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='cdrom'> <target dev='hdc' bus='ide'/> <readonly/> </disk> <disk type='file' device='disk'> <source file='/raid/kvm-images/apps.qcow2'/> <target dev='vda' bus='virtio'/> </disk> <interface type='bridge'> <mac address='54:52:00:27:5e:02'/> <source bridge='br0'/> <model type='virtio'/> </interface> <interface type='bridge'> <mac address='54:52:00:40:cc:7f'/> <source bridge='br1'/> <model type='virtio'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target port='0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' keymap='en-us'/> </devices> </domain> Along with the rest of my firewall rules, the firewalling script includes this command to pass packets destined for a KVM guest: # Allow bridged packets to pass (for KVM guests). iptables -A FORWARD -m physdev --physdev-is-bridged -j ACCEPT (Not applicable to this question, but a side-effect of my bridging configuration appears to be that I can't ever shut down cleanly. The kernel eventually tells me "unregister_netdevice: waiting for br1 to become free" and I have to hard reset the system. Maybe a sign I've done something dumb?)

Read the article

Launching mysql server: same permissions for root and for user

- by toinbis

Hi folks, have been directed here from stackoverflow here, am reposting the question and adding my.cnf at the end of a post. so far in my 10+ years experience with linux, all the permission problems I've ever encountered, have been successfully solved with chmod -R 777 /path/where/the/problem/has/occured (every lie has a grain of truth in it :) This time the trick doesn't work, so I'm turning to you for help. I'm compiling mysql server from scratch with zc.buildout (www . buildout . org). I do launch it by executing /home/toinbis/.../parts/mysql/bin/mysqld_safe, this works. The thing is that i'll be launching this from within supervisor (supervisord . org) script, and when used on the deployment server, it'll need it to be launched with root permissions(so that nginx server, launched with the same script, would have access to 80 port). The problem is that sudo /home/toinbis/.../parts/mysql/bin/mysqld_safe, fails, generating the error, posted bellow, in mysql error log (apache and nginx works as expected). http://lists.mysql.com/mysql/216045 suggests, that "there are two errors: A missing table and a file system that mysqld doesn't have access to". Mysqldatadir and all the mysql server binary files has 777 permissions, talbe mysql.plugin does exist and has 777 permissions (why Can't open the mysql.plugin table?), "sudo touch mysql_datadir/tmp/file" does create file (why Can't create/write to file /home/toinbis/.../runtime/mysql_datadir/tmp/ib4e9Huz?). chgrp -R mysql mysql_datadir and adding "root, toinbis, mysql" users to mysql group ( cat /etc/group | grep mysql outputs mysql:x:124:root,toinbis,mysql) has no effect - when i launch it as a casual user, it starts, when as a root - it fails. Does mysql server, even started as root, tries to operate as other, let's say, 'mysql' user? but even in that case, adding mysql user to mysql group and making all the mysql_datadirs files belong to mysql group should make things work smoothly. I do know that it might be a better idea to simply to launch one the nginx as root and mysql - as just a user, but this error irritated me enough so to devote enough energy so not to only "make things work", but to also make things work exactly as i wanted it initially, so to have a proof of concept that it's possible. and this is the generated error: 091213 20:02:55 mysqld_safe Starting mysqld daemon with databases from /home/toinbis/.../runtime/mysql_datadir /home/toinbis/.../parts/mysql/libexec/mysqld: Table 'plugin' is read only 091213 20:02:55 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. /home/toinbis/.../parts/mysql/libexec/mysqld: Can't create/write to file '/home/toinbis/.../runtime/mysql_datadir/tmp/ib4e9Huz' (Errcode: 13) 091213 20:02:55 InnoDB: Error: unable to create temporary file; errno: 13 091213 20:02:55 [ERROR] Plugin 'InnoDB' init function returned error. 091213 20:02:55 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 091213 20:02:55 [ERROR] Can't start server : Bind on unix socket: Permission denied 091213 20:02:55 [ERROR] Do you already have another mysqld server running on socket: /home/toinbis/.../runtime/var/pids/mysql.sock ? 091213 20:02:55 [ERROR] Aborting 091213 20:02:55 [Note] /home/toinbis/.../parts/mysql/libexec/mysqld: Shutdown complete 091213 20:02:55 mysqld_safe mysqld from pid file /home/toinbis/.../runtime/var/pids/mysql.pid ended My my.cnf (the basedir and datadir(including tempdir) have chmod -R 777 permissions) : [client] socket = /home/toinbis/.../runtime/var/pids/mysql.sock port = 8002 [mysqld_safe] socket = /home/toinbis/.../runtime/var/pids/mysql.sock nice = 0 [mysqld] # # * Basic Settings # socket = /home/toinbis/.../runtime/var/pids/mysql.sock port = 8002 pid-file = /home/toinbis/.../runtime/var/pids/mysql.pid basedir = /home/toinbis/.../parts/mysql datadir = /home/toinbis/.../runtime/mysql_datadir tmpdir = /home/toinbis/.../runtime/mysql_datadir/tmp skip-external-locking bind-address = 127.0.0.1 log-error =/home/toinbis/.../runtime/logs/mysql_errorlog # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 32M thread_stack = 128K thread_cache_size = 8 myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. #log = /home/toinbis/.../runtime/logs/mysql_logs/mysql.log # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration #log_slow_queries = /home/toinbis/.../runtime/logs/mysql_logs/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. #server-id = 1 #log_bin = /home/toinbis/.../runtime/mysql_datadir/mysql-bin.log #binlog_format = ROW #read_only = 0 #expire_logs_days = 10 #max_binlog_size = 100M #sync_binlog = 1 #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # innodb_data_file_path = ibdata1:10M:autoextend innodb_buffer_pool_size=64M innodb_log_file_size=16M innodb_log_buffer_size=8M innodb_flush_log_at_trx_commit=1 innodb_file_per_table innodb_locks_unsafe_for_binlog=1 [mysqldump] quick quote-names max_allowed_packet = 32M [mysql] #no-auto-rehash # faster start of mysql but no tab completion [isamchk] key_buffer = 16M Any ideas much appreciated! regards, to P.S. sorry for messy hyperlinks, it's my first post and anti-spam feature of SF doesn't allow to post them properly :)

Search Results

Search found 3147 results on 126 pages for 'debian wheezy'.

Page 124/126 | < Previous Page | 120 121 122 123 124 125 126 | Next Page >

- by Victor Henriquez

- by Zoran

- by brain99

- by marc.riera

- by 010110110101

- by neezer

- by Ron

- by dogmatic69

- by Skip Huffman

- by lee.O

- by Nuno

- by takpar

- by Alex

- by meeper

- by Halfgaar

- by GorillaPatch

- by user1389890

- by phew

- by Halfgaar

- by Samuel Linde

- by James

- by Steve Madsen

- by toinbis

< Previous Page | 120 121 122 123 124 125 126 | Next Page >