Search Results

Search found 14873 results on 595 pages for 'hard drives'.

Page 124/595 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

  • Can't install Ubuntu on Asus Eee 1015pem

    - by Peter
    I'm having trouble to install Ubuntu. I use a ASUS Eee 1015pem netbook. Recently, I my netbook got wet. I had it inside my backback and all my things got wet. The netbook boots up fine but it will not load the OS. I downloaded ubuntu onto my external hard drive and changed the settings in my Bios to boot from a removable device. Nothing happens. When I plug in my external hard drive I'm not able to get to the boot icon. I have to unplug it the external hard drive. Set my boot settings I tried both Removable and CD-Rom. Than I plug my external drive back in and nothing happens on either settings. My Asus never came with a recovery disk and suppose to have a build in recovery by pressing F9 in the Bios. Also I need to disable Boot Booster in Bios and Boot Booster is not even an opition in Bios. My friend told me try installing Ubuntu but now I'm having no luck with Ubuntu. Any suggestions?

    Read the article

  • Centrino Wireless-N 1000 takes forever to connect and keeps asking for password

    - by waclock
    A few days ago I started having this problem. When I tried to connect to any WiFi Connection it would stay connecting forever, and after a minute or so it would ask me for the password again. The strange thing is that this happened out of nowhere, I did not install any new drivers or anything like that. After this happened I decided to uninstall ubuntu and install it again ("inside windows") but the problem is still there. Any suggestions would be greatly appreciated. 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 06 serial: 2c:27:d7:aa:e4:7d size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:50 ioport:4000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:0d:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:09:9c:58 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-23-generic-pae firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:52 memory:c4500000-c4501fff *-network description: Ethernet interface physical id: 1 bus info: usb@2:1.2 logical name: eth1 serial: ee:85:2f:7d:80:96 capabilities: ethernet physical configuration: broadcast=yes driver=ipheth ip=172.20.10.2 link=yes multicast=yes

    Read the article

  • SMART: DISK FAILURE IS IMMINENT (under 24 hours?)

    - by flix
    I have on my hard drive 2 OSes: Ubuntu 12.04 and Windows Vista( I keep it just because of school). Everything was OK on both OSes,but one day on Ubuntu I was getting awkward noises from my notebooks's hard drive and then everything stops and I couldn't do anything. On Windows everything was ok. Everytime I boot on Ubuntu I can get 5 minutes of normal run, without problems. After that the hard drive sounds crazy and nothing works. I could run S.M.A.R.T tests from a older Ubuntu CD (10.04) from the GUI(Disk Utility, or something like that and from terminal). From the GUI I got that the DISK FAILURE IS IMMINENT and I have ~700 bad blocks(or broken blocks, I had that test I while ago) on my HDD. From the terminal ( I don't remember if it was fsck or a SMART test command) I got that the HDD will fail in under 24 hours. Since then it passed 2-3 weeks. I've tried "badblocks" but after 10 hours it was still running and I had to stop it. Now I have to use cygwin and other alternatives for my linux apps on Windows. PLEASE HELP!!! How can I separate the bad blocks from Ubuntu so it wouldn't use them?

    Read the article

  • Boot existing ubuntu installation on uefi, GPT BTRFS

    - by user204720
    I have looked through many of the questions, and haven't found anything that quite satisfies this problem. I have an ssd hard drive that is bootable from my old computer. It is a standard BIOS, however, I built a new computer with Z87 motherboard that is a UEFI. What I'd like to do is boot from this hard drive without wiping out the hard drive. I've tried booting from legacy mode, doesn't seem to work. Part of the multitude of problems is my partitioning scheme, which is GPT. sdx1 is the btrfs system, sdx2 swap, sdx3 is bios_grub. I've tried setting the UEFI/BIOS to boot in legacy mode, I've tried turning my swap partition into a Grub EFI boot, I've tried copying the file system onto a new drive installed on the new system. However, copying the information doesn't keep the filesystem or subvolumes intact. I've also tried boot-repair which is when I overwrote the swap space. I'd really rather not start over on a new install, so any other suggested trees to bark up would be appreciated. For the record, I hate you Microsoft, and ASUS I understand complying with microsoft, but make it optional... I'm really disappointed in that I have to deal with Windows 8 when I have nothing to do with it. Something I think I could try, but would like to hear from more experienced users. Moving the sdx1 (btrfs /@/@home) partion and opening up a 100 MB partition on the beginning sectors and install efi compatible Grub2 installation. Would it work? How to move a partition?

    Read the article

  • looking for a short explanation of fuzzy logic

    - by user613326
    Well i got the idea that basics of fuzzy logic are not that hard to grasp. And i got the feeling that someone might explain it to me in like 30 minutes. Just like i understand neural networks and am able to re-create the famous Xor problem. And go just beyond it and create 3 layer networks of x nodes. I'd like to understand fuzzy till a similar usefully level, in c# language. However the problem is face, I'd like to get concept right however i see many websites who include lots of errors in their basic explaining. Like for example showing pictures and use different numbers as shown in pictures to calculate, as if lots of people just copied stuff without noticing what they write down. While others for me go to deep in their math notation) To me that's very annoying to learn from. For me there is no need to re-invent wheel; Aforge already got a fuzzy logic framework. So what i am looking for are some good examples, good examples like how the neural XOR problem is solved. Is there anyone such a instructional resource out there; do you know a web page, or YouTube where it is shortly explained, what would you recommend me ? Note this article comes close; but it just doesnt nail it for me. After that i downloaded a bunch of free PDF's but most are academic and hard to read for me (i'm not English and dont have a special math degree). (i've been looking around a lot for this, good starter material about it is hard to find).

    Read the article

  • Is it possible to extend partition in which I have installed Ubuntu

    - by Santosh
    Before installing my current Ubuntu Oneiric Ocelot I was having 3 partitions on my hard drive (each in NTFS, and divided in 21GBs, 10GBs and 37GBs; approx 80GB). I put in the DVD in DVD-ROM and booted up with it. I was prompt whether to install Ubuntu side by current operating system (Windows 7) or totally remove all operating system. I choose to install side by the current operating system. In next screen I took one of my partition (the one which was of 37GB) and totally formatted it. Then created a ext4 file system of 10GBs on it (here 'it' means partition that was of 37GB, not whole HDD). While proceeding I was asked to make swap partition so I created another swap partition of 5GBs. I have Ubuntu installed, but now I am regretting about that 10GB, I should have done it more since I have much more space on my hard drive. And I have 22GBs of my hard drive useless (neither it is in ntfs nor ext4). I want to increase the size of ext4 partition in which I have installed my Ubuntu; from 10GB to something more.

    Read the article

  • Can't shutdown Ubuntu (Wubi Installation)

    - by zsgre3nd3s7
    I downloaded Ubuntu 12.04 using Wubi. The installation went correctly and everything was working fine until I tried to shutdown. I clicked shutdown and then Ubuntu started shutdown, but as soon as I saw the Ubuntu logo with blank dots under, it froze. I had to perform a hard shutdown. After booting my computer back and going into Ubuntu, I tried shutting it down again but this time it took me on a black page with lots and lots of log writing on the screen and after a little while, it stopped writing stuff. I was able to input characters using the keyboard and everything, but it never shutdown. I had to perform a hard shutdown again. Now it always gives me a Ubuntu logo and freezes. What should I do? I know hard shutdowns are bad and want to avoid them. Is there anyway to make shutdowns work? I tried a reboot and it also froze on the Ubuntu logo. Sony VAIO Model E SVE17115FDB Laptop. Graphic card - AMD RADEON HD 7650M (and it installed correctly in Ubuntu). BIOS - H2O Bios. Processor - Intel i7-3612QM. Edit: I only installed the AMD/ATI proprietary drivers FGLRX, not the AMD/ATI post release drivers because they keep showing an error message. Here is jockey.log. Edit 2: Here is the log that i mentioned before that appeared on my screen, it appeared after i tried reinstalling my AMD driver but failed so i reinstalled the other one. Sorry for the quality i took those pictures with my phone.

    Read the article

  • SMART says disk failure is imminent due to bad blocks, what do I need to do?

    - by flix
    I have on my hard drive 2 OSes: Ubuntu 12.04 and Windows Vista (I keep it just because of school). Everything was OK on both OSes, but one day on Ubuntu I was getting awkward noises from my notebooks' hard drive and then everything stopped and I couldn't do anything. On Windows everything was OK. Every time I boot Ubuntu I can get 5 minutes normal run time, without problems. After that the hard drive sounds crazy and nothing works. I could run S.M.A.R.T tests from a older Ubuntu CD (10.04) from the GUI (Disk Utility, or something like that and from terminal). From the GUI, I got that the DISK FAILURE IS IMMINENT and I have ~700 bad blocks (or broken blocks, I had that test I while ago) on my HDD. From the terminal (I don't remember if it was fsck or a SMART test command) I got that the HDD will fail in under 24 hours. Since then it passed 2-3 weeks. I've tried "badblocks" but after 10 hours it was still running and I had to stop it. Now I have to use cygwin and other alternatives for my Linux apps on Windows. How can I separate the bad blocks from Ubuntu so it wouldn't use them? Please help.

    Read the article

  • Is it good idea to require to commit only working code?

    - by Astronavigator
    Sometimes I hear people saying something like "All committed code must be working". In some articles people even write descriptions how to create svn or git hooks that compile and test code before commit. In my company we usually create one branch for a feature, and one programmer usually works in this branch. I often (1 per 100, I think and as I think with good reason) do non-compilable commits. It seems to me that requirement of "always compilable/stable" commits conflicts with the idea of frequent commits. A programmer would rather make one commit in a week than test the whole project's stability/compilability ten times a day. For only compilable code I use tags and some selected branches (trunk etc). I see these reasons to commit not fully working or not compilable code: If I develop a new feature, it is hard to make it work writing a few lines of code. If I am editing a feature, it is again sometimes hard to keep code working every time. If I am changing some function's prototype or interface, I would also make hundreds of changes, not mechanical changes, but intellectual. Sometimes one of them could cause me to carry out hundreds of commits (but if I want all commits to be stable I should commit 1 time instead of 100). In all these cases to make stable commits I would make commits containing many-many-many changes and it will be very-very-very hard to find out "What happened in this commit?". Another aspect of this problem is that compiling code gives no guarantee of proper working. So is it good idea to require every commit to be stable/compilable? Does it depends on branching model or CVS? In your company, is it forbidden to make non compilable commits? Is it (and why) a bad idea to use only selected branches (including trunk) and tags for stable versions?

    Read the article

  • Dealing with three Windows partitions in dual boot installation

    - by Tim
    For dual-boot installation of Ubuntu after Windows. Quoted from ubuntuguide If a Windows boot partition exists as a second NTFS partition, it should be left alone. If there is a Windows recovery partition also installed, it can also be left alone as long as there are only two NTFS partitions total on the hard drive (i.e. there is no NTFS boot partition as well). If there are a total of 3 NTFS partitions on the hard drive, then the third Windows NTFS partition (the recovery partition) should be removed after creating Recovery CDs from it (see here). In the last case where Windows has three partitions, I was wondering why it says the recovery partition shall be removed? Is it possible to keep the three and create another extended partition with several logical partitions for installing Ubuntu and dual-booting the two OSes? I plan to dual-boot install Ubuntu 10.04 with existing Windows 7. Following is the layout of the current partitions of my hard drive viewed from Windows 7: So must I remove the Lenovo_Recovery (Q:) partition for the same reason you give for the first question? Thanks and regards!

    Read the article

  • foreign-architecture

    - by speedy-MACHO
    Always when I install something, I get the following error multiple times: Unknown configuration key 'foreign-architecture' found in your 'dpkg' configuration files. This warning will become a hard error at a later date, so please remove the offending configuration options and replace them with 'dpkg --add-architecture' invocations at the command line. When I try dpkg --add-architecture I get: Unknown configuration key `foreign-architecture' found in your `dpkg' configuration files. This warning will become a hard error at a later date, so please remove the offending configuration options and replace them with `dpkg --add-architecture' invocations at the command line. dpkg: error: --add-architecture takes one argument Type dpkg --help for help about installing and deinstalling packages [*]; Use `dselect' or `aptitude' for user-friendly package management; Type dpkg -Dhelp for a list of dpkg debug flag values; Type dpkg --force-help for a list of forcing options; Type dpkg-deb --help for help about manipulating *.deb files; Options marked [*] produce a lot of output - pipe it through `less' or `more' ! I've no problems yet, but since it says This warning will become a hard error at a later date I better do something about this. When I search 'foreign-architecture', I find an empty file, containing not a single byte. I somehow can't delete that file. Please help, it's a kind of creapy...

    Read the article

  • What Does Installing Ubuntu "Alongside" Windows Entail?

    - by Soft Skeleton
    I recently posted a question about an error I was receiving trying to access Ubuntu from the boot menu. I am using Windows 7 and Ubuntu 12.x (I THINK because I haven't accessed it in over a year due to being unable to run an important program for one of my classes on Ubuntu). On another laptop, I partitioned the hard drive and installed Windows and Ubuntu on the partitions. On this laptop, I simply installed Ubuntu from Windows, picking the option "alongside Windows", and didn't partition my hard drive manually. I was under the impression "alongside" entailed that Ubuntu would partition my hard drive, and that if I were to return my Windows partition to factory settings it would not affect the Ubuntu partition. However, given my current problem, I am wondering if I was mistaken in this assumption? When installing Ubuntu from Windows, selecting "alongside" Windows as the option from the Ubuntu installer, does that simply install Ubuntu within the Windows partition and thus returning it to factory settings would wipe out anything I had on the Ubuntu OS as well? Ubuntu is still in the boot menu as an option, but when I try to access it it says the drive is "corrupt" and wubi is mentioned in the error. I additionally tried to download a program ran from Windows to investigate partitions and there were no sign of my Ubuntu partition viewable from Windows. Is it possible Windows just can't see it? Any insight, corrections or answers is appreciated.

    Read the article

  • wireless blocked after installing ubuntu 12.04

    - by Cornelia Frank
    I am using a lenovo S10-3 ideapad; had no problems with earlier version of ubuntu, only since installing 12.04. Have looked through many of the questions on the same issue and tried potential solutions but cannot seem to solve my problem. The hardware switch is in 'on' position and the wireless light comes on very briefly (2-3 sec) when the laptop starts up but then goes off and stays off. Pressing FN+F5 does nothing at all. I'd be grateful for any assistance. Cornelia Have received the following responses in Terminal: cf@cf-Lenovo:~$ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes cf@cf-Lenovo:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off eth0 no wireless extensions. cf@cf-Lenovo:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 02 serial: 00:26:9e:ee:7f:4c size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=10.0.1.8 latency=0 multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0520000-f0520fff memory:f0510000-f051ffff memory:f0540000-f055ffff *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:09:00.0 logical name: wlan0 version: 01 serial: c4:17:fe:f8:bc:d7 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-31-generic-pae firmware=N/A latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:f0100000-f010ffff WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

    Read the article

  • No space left on disk

    - by Ned
    folks. I'm trying to copy/move files to an external 1 TB hard drive with about 50 GB remaining space. I receive a "no space left on disk" when I try. I've moved files off and retried, but still get the same message. Disk Usage Analyzer, Properties, and freeware Treesize all report available hard drive space of about 50 GB. I've tried df -i (50 GB available) and df -k, with the latter reporting only 1% of inode usage. I've been able to save files from Firefox to the drive also. I can't even rename files without getting the message. Yesterday in the midst of trying to figure this out I tried to move 4 files to the drive and got the message. Today, I found them on the drive. What's up with that? (That's the only time that has happened to my knowledge.) Is this an ubuntu problem? or is my hard drive just about to fail because of something like a controller problem? Any thoughts would be appreciated.

    Read the article

  • GRUB2 stuck at rescue console, showing "unknown filesystem" for all partitions

    - by AndiDog
    I installed Ubuntu 12.04 on my external USB drive, where I have a 700GB NTFS partition followed by the new 6GB ext4 partition and a swap partition (all primary). The GRUB MBR is also installed to the external hard disk. Since my BIOS puts the external drive as first disk when booting, I removed my internal hard disk before installation in order to avoid ordering problems. Now when I boot from the external drive, GRUB is stuck at the rescue console with the error "unknown filesystem". grub rescue> ls (hd0) (hd0,msdos3) (hd0,msdos2) (hd0,msdos1) ls (hd0,<any of them>)/ gives me "unknown filesystem", thus also "insmod normal" GRUB doesn't seem to be able to read my Linux partition as you can see above?! How can I solve this? Additional info: bootinfoscript says (this is with the internal drive in again, but that does not make a difference): Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos2)/boot/grub on this drive. sdb1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sdb2: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb3: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info:

    Read the article

  • Is there supposed to be a Windows Network folder in the file manager?

    - by Cindy
    I pulled my hard drive out of my computer and started with a bootable usb version of Ubuntu, which I am using that at this point. At first boot, I see that there is a Windows folder when browsing network. Since there is no operating system present, besides the usb that I boot from, should there be a Windows network folder? Original question First of all I just want to say, I wish I had tried Ubuntu a couple years ago when I first heard about it, but I was like a lot of the population and went with the "easy way" and stuck with Windows because I didn't want to take the time to learn something new. Well, about 3 months ago I realized someone had hacked into my computer, and then found they had hacked my facebook account so I decided I had better do a complete credit check. I found student loans (totalling about 30,000 so far) had recently showed up on my credit report. I think it's going to be a long, long road to recovery now but I'm hoping Ubuntu will be a start and definitely an eye opener. My relationship with Windows is over. I had 3 antivirus programs running, none were protecting me like I thought they were. Turned out a free program that I downloaded was the only one that could detect and clean the virus, but by then it was too late. Anyhow, my question is, I pulled my hard drive out of my computer and started with a bootable usb version of Ubuntu, which I am using that at this point. At first boot, I see that there is a Windows folder when browsing network. Since there is no operating system present, besides the usb that I boot from, should there be a Windows network folder? I am using a local ISP (and won't be much longer because I am very paranoid at this point) and I want to make sure all is ok before I put my new hard drive in and install Ubuntu. Any help would be appreciated. Also, I want to thank Ubuntu and the community for giving people an alternative.

    Read the article

  • I have Ubuntu only and need to install Windows

    - by Terzuz
    I had Windows 8, I installed Ubuntu for a new OS, Then I want to sadly go back to Windows , I have a Windows Vista *.iso but I can't boot from it. When I try to extract the '.iso file and have the contents on my USB so it can boot up , When I restart and click F9 for my Boot Device Options , Only my Hard Drive and CD ROM are there but my "Generic Flash Drive" is not , But when I do not have Windows Vista '.iso on it , It will show up in the list. How can I make a partition of some sort, Provide instructions since I am new at this all , then I need to be able to use the Windows Vista installer and install Windows Vista, I would like Dual-Boot if possible. Info: I have the HP 2000 Laptop (Mine was removed from the Best Buy Website so the closest laptop to the specifications and the design is the link at the bottom) I am running Ubuntu 12.10. I have 4GB of RAM , 220 GB in my Hard Drive left , I have a USB Flash Drive which works sometimes , other times it fails. Note - I tried using GParted in Ubuntu but I had a problem where the main drive with 220 GB Free was locked , I am not sure what to do and can not find the correct forum. http://www.bestbuy.com/site/HP+-+Pavilion+15.6"+Laptop+-+4GB+Memory+-+320GB+Hard+Drive+-+Pewter/5043836.p?id=1218608951204&skuId=5043836

    Read the article

  • Testing my model for hybrid scheduling in Embedded Systems

    - by markusian
    I am working on a project for school, where I have to analyze the performances of a few fixed-priority servers algorithms (polling server, deferrable server, priority exchange) using a simulator in the case of hybrid scheduling, where we have both hard periodic tasks and soft aperiodic tasks. In my model I consider that: the hard tasks have a period equal to their deadline, with a known worst case execution time (wcet). The actual execution time could be smaller than the wcet. the soft tasks have a known wcet and random interarrival times. The actual execution time could be smaller than the wcet. In order to test those algorithms I need realistic case studies. For this reason I'm digging in the scientific literature but I am facing different problems: Sometimes I find a list of hard tasks with wcet, but it is not specified how the soft tasks parameters are found. Given the wcet of a task, how can I model its actual execution time? This means, what random distribution should I use considering the wcet? How can I model the random interarrival times of soft aperiodic tasks?

    Read the article

  • Oneric Aspire One. After latest 11.10 update to Linux 3.0.0-9 boot hangs at staement "Starting Bluetooth"

    - by hevh
    I have today updated the version of Linux on Ubuntu on my Acer Aspire One. The boot hangs on the statement "Starting Bluetooth". Help please!! EDIT1: I get the grub menu when I start the netbook and it doesn´t matter which version of linux I choose the resulkt is the same. It gets as far as the Ubuntu spash screen then drops into command line mode then hangs on the line "Starting Bluetooth". I can log in and have tried various forms of the apt-get command to fix the system but with no result. I do not need bluetooth at the moment and so could remove the application if I knew how. (have tried apt-get remove bluez). When I use the command sudo apt-get -f install I get an error message saying "There's not enough space in /var/lib/mysql/" folowed by several other error messages. I have spent some time looking for similar problems and solutions using google but so far got to nothing to help. Thanks EDIT2: I have since discovered when running Knoppix or slitaz from a usb stick that the file managers report the hard disc as having no space. However GPARTED reports it as having 3.69gb. I do recall making space on the hard drive by deleting some old files and emptying trash whilst the update was running; perhaps its related. Any suggestions for how I can recover the apparently lost space from hard disc without losing the data. I have backups of the actual data but do not wnat to lose the applcations configuration. Thanks Kev

    Read the article

  • Wireless problems with Broadcom BCM4313 with windows7 (duplicate)

    - by user292394
    I have wireless connection problem can't connect my wireless adress lspci -vvnn | grep 14e4 03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01) iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no lsmod Module Size Used by bnep 19624 2 rfcomm 69160 8 ip6t_REJECT 12939 1 xt_hl 12521 6 ip6t_rt 13537 3 nf_conntrack_ipv6 18894 8 nf_defrag_ipv6 34768 1 nf_conntrack_ipv6 ipt_REJECT 12541 1 xt_LOG 17717 10 xt_limit 12711 13 xt_tcpudp 12884 18 xt_addrtype 12635 4 nf_conntrack_ipv4 15012 8 nf_defrag_ipv4 12758 1 nf_conntrack_ipv4 xt_conntrack 12760 16 ip6table_filter 12815 1 ip6_tables 27025 1 ip6table_filter nf_conntrack_netbios_ns 12665 0 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns nf_nat_ftp 12770 0 nf_nat 21798 1 nf_nat_ftp nf_conntrack_ftp 18638 1 nf_nat_ftp nf_conntrack 96976 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6 iptable_filter 12810 1 ip_tables 27239 1 iptable_filter vx_tables 34059 13 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype,ip6t_REJECT uvcvideo 80885 0 videobuf2_vmalloc 13216 1 uvcvideo videobuf2_memops 13362 1 videobuf2_vmalloc snd_hda_codec_hdmi 46207 1 videobuf2_core 40664 1 uvcvideo videodev 134688 2 uvcvideo,videobuf2_core snd_hda_codec_conexant 57441 1 snd_hda_intel 52355 8 snd_hda_codec 192906 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 102099 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 dm_multipath 22873 0 snd_seq_midi_event 14899 1 snd_seq_midi scsi_dh 14882 1 dm_multipath lib80211_crypt_tkip 17619 0 snd_rawmidi 30144 1 snd_seq_midi intel_powerclamp 14705 0 coretemp 13435 0 kvm_intel 143060 0 kvm 451511 1 kvm_intel joydev 17381 0 serio_raw 13462 0 snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi intel_ips 18664 0 wl 4207846 0 snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi btusb 32412 0 bluetooth 395423 22 bnep,btusb,rfcomm snd_timer 29482 2 snd_pcm,snd_seq snd 69238 26 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi lib80211 14381 2 wl,lib80211_crypt_tkip toshiba_bluetooth 12852 0 cfg80211 484040 1 wl lpc_ich 21080 0 fglrx 8085343 190 soundcore 12680 1 snd toshiba_acpi 22901 0 sparse_keymap 13948 1 toshiba_acpi wmi 19177 1 toshiba_acpi amd_iommu_v2 19054 1 fglrx video 19476 0 mei_me 18627 0 mei 82276 1 mei_me mac_hid 13205 0 parport_pc 32701 0 ppdev 17671 0 lp 17759 0 parport 42348 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 52570 0 hid 106148 2 hid_generic,usbhid psmouse 102222 0 ahci 25819 3 libahci 32168 1 ahci atl1c 46086 0 dm_mirror 22135 0 dm_region_hash 20862 1 dm_mirror dm_log 18411 2 dm_region_hash,dm_mirror Can someone give any ideas on how I can fix my wireless

    Read the article

  • Switching To Ubuntu 14.04 from Windows 8.1

    - by Asangam
    everyone i am newto these linux stuffs. Currently i'm a user of Windows8.1 . When windows 8 was roling out i was like i'm never going to leave and will be always stick to windows8 but now i think it's time to switch linux because being in windows forever i don't think i can do something very good .I wanted to be OpenSource :) . So i really dont have any idea about linux . For me the best distro is Ubuntu and Kubuntu offcourse the latest release . So what i'm afraid of switching to linux is its compability .The compatibility i'm talking about is with the hardware's and driver's . For eg sometime after fresh install of windows we need to install the display,usb and wifi drivers to function . For some computer or brands those driver's are hard to find and i can't even think of linux how hard are they to find if it needs installing drivers. So my main question is that do i need to install the drivers for my wifi adapters display and some other stuffs or the distro i choosed i.e Ubuntu 14.0.4 consists of those dirvers and what about the 64 and 32bit . My machines is 64bit aso do i need to install the 64bit one . I mean i know the advantages of installing the 64 bit one but like windows is it kinda hard to find softwares for the 64 bit one . Or the 32 bit is recommended . And Yes I will be highly appreciated for the answers to my questions . Thank You :)

    Read the article

  • My computer is broken after recent update attempt to 14.04

    - by user317550
    So it all started on a day much like today, because it is today but that's not the point, when I got a notification telling me I haven't upgraded to 14.04. Not due to lack of trying, however. It offered to upgrade me itself. Now keep in mind, I've tried very hard to upgrade my is from 12.04 to 14.04. Many times, I believe, due to tinkering where there shouldn't be tinkering, my BIOS are messed up. So upgrading is essentially impossible, but I wasn't about to stop it from updating for me, thinking it didn't have too much to do with BIOS as it doesn't reboot until after. So I let it go about its business and some time later I look back at it, and my unity sidebar is gone, and anytime there's text on screen it shows as those box things. The real bottom line is that I want to know my options. All of them. I would love to be able to keep the stuff on my hard drive so a hard drive swap may be an option if you guys say that would work. I just need my computer back. Let me know if I left anything out. Peace! B^)

    Read the article

  • New Version: ZFS RAID Calculator v7

    - by uwes
    New version available now. ZFS RAID Calculator v7 on eSTEP portal. The Tool calculates key capacity parameter like  number of Vdev's, number of spares, number of data drives, raw RAID capacity(TB), usable capacity (TiB) and (TB) according the different possible  RAID types for a given ZS3 configuration. Updates included in v7: added an open office version compatible with MacOS included the obsolete drives as options for upgrade calculations simplified the color scheme and tweaked the formulas for better compatibility The spreadsheet can be downloaded from eSTEP portal. URL: http://launch.oracle.com/ PIN: eSTEP_2011 The material can be found under tab eSTEP Download.

    Read the article

  • Leaks on Wikis: "Corporations...You're Next!" Oracle Desktop Virtualization Can Help.

    - by adam.hawley
    Between all the press coverage on the unauthorized release of 251,287 diplomatic documents and on previous extensive releases of classified documents on the events in Iraq and Afghanistan, one could be forgiven for thinking massive leaks are really an issue for governments, but it is not: It is an issue for corporations as well. In fact, corporations are apparently set to be the next big target for things like Wikileaks. Just the threat of such a release against one corporation recently caused the price of their stock to drop 3% after the leak organization claimed to have 5GB of information from inside the company, with the implication that it might be damaging or embarrassing information. At the moment of this blog anyway, we don't know yet if that is true or how they got the information but how did the diplomatic cable leak happen? For the diplomatic cables, according to press reports, a private in the military, with some appropriate level of security clearance (that is, he apparently had the correct level of security clearance to be accessing the information...he reportedly didn't "hack" his way through anything to get to the documents which might have raised some red flags...), is accused of accessing the material and copying it onto a writeable CD labeled "Lady Gaga" and walking out the door with it. Upload and... Done. In the same article, the accused is quoted as saying "Information should be free. It belongs in the public domain." Now think about all the confidential information in your company or non-profit... from credit card information, to phone records, to customer or donor lists, to corporate strategy documents, product cost information, etc, etc.... And then think about that last quote above from what was a very junior level person in the organization...still feeling comfortable with your ability to control all your information? So what can you do to guard against these types of breaches where there is no outsider (or even insider) intrusion to detect per se, but rather someone with malicious intent is physically walking out the door with data that they are otherwise allowed to access in their daily work? A major first step it to make it physically, logistically much harder to walk away with the information. If the user with malicious intent has no way to copy to removable or moble media (USB sticks, thumb drives, CDs, DVDs, memory cards, or even laptop disk drives) then, as a practical matter it is much more difficult to physically move the information outside the firewall. But how can you control access tightly and reliably and still keep your hundreds or even thousands of users productive in their daily job? Oracle Desktop Virtualization products can help.Oracle's comprehensive suite of desktop virtualization and access products allow your applications and, most importantly, the related data, to stay in the (highly secured) data center while still allowing secure access from just about anywhere your users need to be to be productive.  Users can securely access all the data they need to do their job, whether from work, from home, or on the road and in the field, but fully configurable policies set up centrally by privileged administrators allow you to control whether, for instance, they are allowed to print documents or use USB devices or other removable media.  Centrally set policies can also control not only whether they can download to removable devices, but also whether they can upload information (see StuxNet for why that is important...)In fact, by using Sun Ray Client desktop hardware, which does not contain any disk drives, or removable media drives, even theft of the desktop device itself would not make you vulnerable to data loss, unlike a laptop that can be stolen with hundreds of gigabytes of information on its disk drive.  And for extreme security situations, Sun Ray Clients even come standard with the ability to use fibre optic ethernet networking to each client to prevent the possibility of unauthorized monitoring of network traffic.But even without Sun Ray Client hardware, users can leverage Oracle's Secure Global Desktop software or the Oracle Virtual Desktop Client to securely access server-resident applications, desktop sessions, or full desktop virtual machines without persisting any application data on the desktop or laptop being used to access the information.  And, again, even in this context, the Oracle products allow you to control what gets uploaded, downloaded, or printed for example.Another benefit of Oracle's Desktop Virtualization and access products is the ability to rapidly and easily shut off user access centrally through administrative polices if, for example, an employee changes roles or leaves the company and should no longer have access to the information.Oracle's Desktop Virtualization suite of products can help reduce operating expense and increase user productivity, and those are good reasons alone to consider their use.  But the dynamics of today's world dictate that security is one of the top reasons for implementing a virtual desktop architecture in enterprises.For more information on these products, view the webpages on www.oracle.com and the Oracle Technology Network website.

    Read the article

  • Back Up to Tape the Way You Shop For Groceries

    - by rickramsey
    Imagine if this was how you shopped for groceries: From the end of the aisle sprint to the point where you reach the ketchup. Pull a bottle from the shelf and yell at the top of your lungs, “Got it!” Sprint back to the end of the aisle. Start again and sprint down the same aisle to the mustard, pull a bottle from the shelf and again yell for the whole store to hear, “Got it!” Sprint back to the end of the aisle. Repeat this procedure for every item you need in the aisle. Proceed to the next aisle and follow the same steps for the list of items you need from that aisle. Sounds ridiculous, doesn’t it? Not only is it horribly inefficient, it’s exhausting and can lead to wear out failures on your grocery cart, or worse, yourself. This is essentially how NetApp and some other applications write NDMP backups to tape. In the analogy, the ketchup and mustard are the files to be written, yelling “Got it!” is the equivalent of a sync mark at the end of a file, and the sprint back to the end of an aisle is the process most commonly called a “backhitch” where the drive has to back up on a tape to start writing again. Writing to tape in this way results in very slow tape drive performance and imposes unnecessary wear on the tape drive and the media, especially when writing small files. The good news is not all tape drives behave this way when writing small files. Unlike midrange LTO drives, Oracle’s StorageTek T10000D tape drive is designed to handle this scenario efficiently. The difference between the two drive types is that the T10000D drive gives you the ability to write files in a NetApp NDMP backup environment the way you would normally shop for groceries. With grocery shopping, you essentially stream through aisles picking up items as you go, and then after checking out, yell, “Got it!”, though you might do that last step silently. With the T10000D, it has a feature called the Tape Application Accelerator, which prevents the drive from having to stop after each file is written to notify NetApp or another application that the write was successful. When enabled in the T10000D tape drive, Tape Application Accelerator causes the tape drive to respond to tape mark and file sync commands differently than when disabled: A tape mark received by the tape drive is treated as a buffered tape mark. A file sync received by the tape drive is treated as a no op command. Since buffered tape marks and no op commands do not cause the tape drive to empty the contents of its buffer to tape and backhitch, the data is written to tape in significantly less time. Oracle has emulated NetApp environments with a number of different file sizes and found the following when comparing the T10000D with the Tape Application Accelerator enabled versus LTO6 tape drives. Notice how the T10000D is not only monumentally faster, but also remarkably consistent? In addition, the writing of the 50 GB of files is done without a single backhitch. The LTO6 drive, meanwhile, will perform as many as 3,800 backhitches! At the end of writing the entire set of files, the T10000D tape drive reports back to the application, in this case NetApp, that the write was successful via a tape mark. So if the Tape Application Accelerator dramatically improves performance and reliability, why wouldn’t you always have it enabled? The reason is because tape drive buffers are meant to be just temporary data repositories so in the event of a power loss, there could be data loss in certain environments for the files that resided in the buffer. Fortunately, we do have best practices depending on your environment to avoid this from happening. I highly recommend reading Maximizing Tape Performance with StorageTek T10000 Tape Drives (pdf) to decide which best practice is right for you. The white paper also digs deeper into the benefits of the Tape Application Accelerator. The white paper is free, and after downloading it you can decide for yourself whether you want to yell “Got it!” out loud or just silently to yourself. Customer Advisory Panel One final link: Oracle has started up a Customer Advisory Panel program to collect feedback from customers on their current experiences with Oracle products, as well as desires for future product development. If you would like to participate in the program, go to this link at oracle.com. photo taken on Idaho's Sacajewea Historic Biway by Rick Ramsey - Brian Zents Follow OTN on Blog | Facebook | Twitter | YouTube

    Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >