Search Results

Search found 3567 results on 143 pages for 'instructions'.

Page 124/143 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

• Restore Your PC from Windows Home Server

  - by Mysticgeek

  If your computer crashes or you get a virus infection that makes it unrecoverable, doing a clean install can be a hassle, let alone getting your data back. If you’re backing up your computers to Windows Home Server, you can completely restore them to the last successful backup. Note: For this process to work you need to verify the PC you want to restore is connected to your network via Ethernet. If you have it connected wirelessly it won’t work. Restore a PC from Windows Home Server On the computer you want to restore, pop in the Windows Home Server Home Computer Restore disc and boot from it. If you don’t have one already made, you can easily make one following these instructions. We have also included the link to the restore disc below. Boot from the CD then select if your machine has 512MB or RAM or more. The disc will initialize… Then choose your language and keyboard settings. Hopefully if everything goes correctly, your network card will be detected and you can continue. However, if it doesn’t like in our example, click on the Show Details button. In the Detect Hardware screen click on the Install Drivers button. Now you will need to have a USB flash drive with the correct drivers on it. It has to be a flash drive or a floppy (if you happen to still have one of those) because you can’t take out the Restore CD. If you want to make sure you have the correct drivers on the USB flash drive, open the Windows Home Server Console on another computer on your network. In the Computers and Backup section right-click on the computer you want to restore and select View Backups. Select the backup you want to restore from and click the Open button in the Restore or view Files section. Now drag the entire contents of the folder named Windows Home Server Drivers for Restore to the USB flash drive. Back to the machine you’re trying to restore, insert the USB flash drive with the correct drivers and click the Scan button. Wait a few moments while the drivers are found then click Ok then Continue.   The Restore Computer Wizard starts up… Enter in your home server password and click Next. Select the computer you want to restore. If it isn’t selected by default you can pull it up from the dropdown list under Another Computer. Make certain you’re selecting the correct machine. Now select the backup you want to restore. In this example we only have one but chances are you’ll have several. If you have several backups to choose from, you might want to check out the details for them. Now you can select the disk from backup and and restore it to the destination volume. You might need to initialize a disk, change a drive letter, or other disk management tasks, if so, then click on Run Disk Manger. For example we want to change the destination drive letter to (C:).   After you’ve made all the changes to the destination disk you can continue with the restore process. If everything looks correct, confirm the restore configuration. If you need to make any changes at this point, you can still go back and make them. Now Windows Home Server will restore your drive. The amount of time it takes will vary depend on the amount of data you have to restore, network connection speed, and hardware. You are notified when the restore successfully completes. Click Finish and the PC will reboot and be restored and should be working correctly. All the updates, programs, and files will be back that were saved to the last successful backup. Anything you might have installed after that backup will be gone. If you have your computers set to backup every night, then hopefully it won’t be a big issue.   Conclusion Backing up the computers on your network to Windows Home Server is a valuable tool in your backup strategy. Sometimes you may only need to restore a couple files and we’ve covered how to restore them from backups on WHS and that works really well. If the unthinkable happens and you need to restore the entire computer, WHS makes that easy too.  Download Windows Home Server Home Computer Restore CD Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerCreate A Windows Home Server Home Computer Restore DiscGMedia Blog: Setting Up a Windows Home ServerShare Ubuntu Home Directories using SambaInstalling Windows Home Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

  Read the article

• Good ol fashioned debugging

  - by Tim Dexter

  I have been helping out one of our new customers over the last day or two and I have even managed to get to the bottom of their problem FTW! They use BIEE and BIP and wanted to mount a BIP report in a dashboard page, so far so good, BIP does that! Just follow the instructions in the BIEE user guide. The wrinkle is that they want to enter some fixed instruction strings into the dashboard prompts to help the user. These are added as fixed values to the prompt as the default values so they appear first. Once the user makes a selection, the default strings disappear. Its a fair requirement but the BIP report chokes Now, the BIP report had been setup with the Autorun checkbox, unchecked. I expected the BIP report to wait for the Go button to be hit but it was trying to run immediately and failing. That was the first issue. You can not stop the BIP report from trying to run in a dashboard. Even if the Autorun is turned off, it seems that dashboard still makes the request to BIP to run the report. Rather than BIP refusing because its waiting for input it goes ahead anyway, I guess the mechanism does not check the autorun flag when the request is coming from the dashboard. It appears that between BIEE and BIP, they collectively ignore the autorun flag. A bug? might be, at least an enhancement request. With that in mind, how could we get BIP to not at least not fail? This fact was stumping me on the parameter error, if the autorun flag was being respected then why was BIP complaining about the parameter values it should not even be doing anything until the Go button is clicked. I now knew that the autorun flag was being ignored, it was a simple case of putting BIP into debug mode. I use the OC4J server on my laptop so debug msgs are routed through the dos box used to start the OC4J container. When I changed a value on the dashboard prompt I spotted some debug text rushing by that subsequently disappeared from the log once the operation was complete. Another bug? I needed to catch that text as it went by, using the print screen function with some software to grab multiple screens as the log appeared and then disappeared. The upshot is that when you change the dashboard prompt value, BIP validates the value against its own LOVs, if its not in the list then it throws the error. Because 'Fill this first' and 'Fill this second' ie fixed strings from the dashboard prompts, are not in the LOV lists and because the report is auto running as soon as the dashboard page is brought up, the report complains about invalid parameters. To get around this, I needed to get the strings into the LOVs. Easily done with a UNION clause: select 'Fill this first' from SH.Products Products UNION select Products."Prod Category" as "Prod Category" from SH.Products Products Now when BIP wants to validate the prompt value, the LOV query fires and finds the fixed string -> No Error. No data, but definitely no errors :0) If users do run with the fixed values, you can capture that in the template. If there is no data in the report, either the fixed values were used or the parameters selected resulted in no rows. You can capture this in the template and display something like. 'Either your parameter values resulted in no data or you have not changed the default values' Thats the upside, the downside is that if your users run the report in the BP UI they re going to see the fixed strings. You could alleviate that by having BIP display the fixed strings in top of its parameter drop boxes (just set them as the default value for the parameter.) But they will not disappear like they do in the dashboard prompts, see below. If the expected autorun behaviour worked ie wait for the Go button, then we would not have to workaround it but for now, its a pretty good solution. It was an enjoyable hour or so for me, took me back to my developer daze, when we used to race each other for the most number of bug fixes. I used to run a distant 2nd behind 'Bugmeister Chen Hu' but led the chasing pack by a reasonable distance.

  Read the article

• How to build Open JavaFX for Android.

  - by PictureCo

  Here's a short recipe for baking JavaFX for Android dalvik. We will need just a few ingredients but each one requires special care. So let's get down to the business.  SourcesThe first ingredient is an open JavaFX repository. This should be piece of cake. As always there's a catch. You probably know that dalvik is jdk6 compatible  and also that certain APIs are missing comparing to good old java vm from Oracle.  Fortunately there is a repository which is a backport of regular OpenJFX to jdk7 and going from jdk7 to jdk6 is possible. The first thing to do is to clone or download the repository from https://bitbucket.org/narya/jfx78. Main page of the project says "It works in some cases" so we will presume that it will work in most cases As I've said dalvik vm misses some APIs which would lead to a build failures. To get them use another compatibility repository which is available on GitHub https://github.com/robovm/robovm-jfx78-compat. Download the zip and unzip sources into jfx78/modules/base.We need also a javafx binary stubs. Use jfxrt.jar from jdk8.The last thing to download are freetype sources from http://freetype.org. These will be necessary for native font rendering. Toolchain setup I have to point out that these instructions were tested only on linux. I suppose they will work with minimal changes also on Mac OS. I also presume that you were able to build open JavaFX. That means all tools like ant, gradle, gcc and jdk8 have been installed and are working all right. In addition to this you will need to download and install jdk7, Android SDK and Android NDK for native code compilation.  Installing all of them will take some time. Don't forget to put them in your path. export ANDROID_SDK=/opt/android-sdk-linux export ANDROID_NDK=/opt/android-ndk-r9b export JAVA_HOME=/opt/jdk1.7.0 export PATH=$JAVA_HOME/bin:$ANDROID_SDK/tools:$ANDROID_SDK/platform-tools:$ANDROID_NDK FreetypeUnzip freetype release sources first. We will have to cross compile them for arm. Firstly we will create a standalone toolchain for cross compiling installed in ~/work/ndk-standalone-19. $ANDROID_NDK/build/tools/make-standalone-toolchain.sh  --platform=android-19 --install-dir=~/work/ndk-standalone-19 After the standalone toolchain has been created cross compile freetype with following script: export TOOLCHAIN=~/work/freetype/ndk-standalone-19 export PATH=$TOOLCHAIN/bin:$PATH export FREETYPE=`pwd` ./configure --host=arm-linux-androideabi --prefix=$FREETYPE/install --without-png --without-zlib --enable-shared sed -i 's/\-version\-info \$(version_info)/-avoid-version/' builds/unix/unix-cc.mk make make install It will compile and install freetype library into $FREETYPE/install. We will link to this install dir later on. It would be possible also to link openjfx font support dynamically against skia library available on Android which already contains freetype. It creates smaller result but can have compatibility problems. Patching Download patches javafx-android-compat.patch + android-tools.patch and patch jfx78 repository. I recommend to have look at patches. First one android-compat.patch updates openjfx build script, removes dependency on SharedSecret classes and updates LensLogger to remove dependency on jdk specific PlatformLogger. Second one android-tools.patch creates helper script in android-tools. The script helps to setup javaFX Android projects. Building Now is time to try the build. Run following script: JAVA_HOME=/opt/jdk1.7.0 JDK_HOME=/opt/jdk1.7.0 ANDROID_SDK=/opt/android-sdk-linux ANDROID_NDK=/opt/android-ndk-r9b PATH=$JAVA_HOME/bin:$ANDROID_SDK/tools:$ANDROID_SDK/platform-tools:$ANDROID_NDK:$PATH gradle -PDEBUG -PDALVIK_VM=true -PBINARY_STUB=~/work/binary_stub/linux/rt/lib/ext/jfxrt.jar \ -PFREETYPE_DIR=~/work/freetype/install -PCOMPILE_TARGETS=android If everything went all right the output is in build/android-sdk Create first JavaFX Android project Use gradle script int android-tools. The script sets the project structure for you.   Following command creates Android HelloWorld project which links to a freshly built javafx runtime and to a HelloWorld application. NAME is a name of Android project. DIR where to create our first project. PACKAGE is package name required by Android. It has nothing to do with a packaging of javafx application. JFX_SDK points to our recently built runtime. JFX_APP points to dist directory of javafx application. (where all application jars sit) JFX_MAIN is fully qualified name of a main class. gradle -PDEBUG -PDIR=/home/user/work -PNAME=HelloWorld -PPACKAGE=com.helloworld \ -PJFX_SDK=/home/user/work/jfx78/build/android-sdk -PJFX_APP=/home/user/NetBeansProjects/HelloWorld/dist \ -PJFX_MAIN=com.helloworld.HelloWorld createProject Now cd to the created project and use it like any other android project. ant clean, debug, uninstall, installd will work. I haven't tried it from any IDE Eclipse nor Netbeans. Special thanks to Stefan Fuchs and Daniel Zwolenski for the repositories used in this blog post.

  Read the article

• Configure Oracle SOA JMSAdatper to Work with WLS JMS Topics

  - by fip

  The WebLogic JMS Topic are typically running in a WLS cluster. So as your SOA composites that receive these Topic messages. In some situation, the two clusters are the same while in others they are sepearate. The composites in SOA cluster are subscribers to the JMS Topic in WebLogic cluster. As nature of JMS Topic is meant to distribute the same copy of messages to all its subscribers, two questions arise immediately when it comes to load balancing the JMS Topic messages against the SOA composites: How to assure all of the SOA cluster members receive different messages instead of the same (duplicate) messages, even though the SOA cluster members are all subscribers to the Topic? How to make sure the messages are evenly distributed (load balanced) to SOA cluster members? Here we will walk through how to configure the JMS Topic, the JmsAdapter connection factory, as well as the composite so that the JMS Topic messages will be evenly distributed to same composite running off different SOA cluster nodes without causing duplication. 2. The typical configuration In this typical configuration, we achieve the load balancing of JMS Topic messages to JmsAdapters by configuring a partitioned distributed topic along with sharable subscriptions. You can reference the documentation for explanation of PDT. And this blog posting does a very good job to visually explain how this combination of configurations would message load balancing among clients of JMS Topics. Our job is to apply this configuration in the context of SOA JMS Adapters. To do so would involve the following steps: Step A. Configure JMS Topic to be UDD and PDT, at the WebLogic cluster that house the JMS Topic Step B. Configure JCA Connection Factory with proper ServerProperties at the SOA cluster Step C. Reference the JCA Connection Factory and define a durable subscriber name, at composite's JmsAdapter (or the *.jca file) Here are more details of each step: Step A. Configure JMS Topic to be UDD and PDT, You do this at the WebLogic cluster that house the JMS Topic. You can follow the instructions at Administration Console Online Help to create a Uniform Distributed Topic. If you use WebLogic Console, then at the same administration screen you can specify "Distribution Type" to be "Uniform", and the Forwarding policy to "Partitioned", which would make the JMS Topic Uniform Distributed Destination and a Partitioned Distributed Topic, respectively Step B: Configure ServerProperties of JCA Connection Factory You do this step at the SOA cluster. This step is to make the JmsAdapter that connect to the JMS Topic through this JCA Connection Factory as a certain type of "client". When you configure the JCA Connection Factory for the JmsAdapter, you define the list of properties in FactoryProperties field, in a semi colon separated list: ClientID=myClient;ClientIDPolicy=UNRESTRICTED;SubscriptionSharingPolicy=SHARABLE;TopicMessageDistributionAll=false You can refer to Chapter 8.4.10 Accessing Distributed Destinations (Queues and Topics) on the WebLogic Server JMS of the Adapter User Guide for the meaning of these properties. Please note: Except for ClientID, other properties such as the ClientIDPolicy=UNRESTRICTED, SubscriptionSharingPolicy=SHARABLE and TopicMessageDistributionAll=false are all default settings for the JmsAdapter's connection factory. Therefore you do NOT have to explicitly specify them explicitly. All you need to do is the specify the ClientID. The ClientID is different from the subscriber ID that we are to discuss in the later steps. To make it simple, you just need to remember you need to specify the client ID and make it unique per connection factory. Here is the example setting: Step C. Reference the JCA Connection Factory and define a durable subscriber name, at composite's JmsAdapter (or the *.jca file) In the following example, the value 'MySubscriberID-1' was given as the value of property 'DurableSubscriber': <adapter-config name="subscribe" adapter="JMS Adapter" wsdlLocation="subscribe.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata"> <connection-factory location="eis/wls/MyTestUDDTopic" UIJmsProvider="WLSJMS" UIConnectionName="ateam-hq24b"/> <endpoint-activation portType="Consume_Message_ptt" operation="Consume_Message"> <activation-spec className="oracle.tip.adapter.jms.inbound.JmsConsumeActivationSpec"> <property name="DurableSubscriber" value="MySubscriberID-1"/> <property name="PayloadType" value="TextMessage"/> <property name="UseMessageListener" value="false"/> <property name="DestinationName" value="jms/MyTestUDDTopic"/> </activation-spec> </endpoint-activation> </adapter-config> You can set the durable subscriber name either at composite's JmsAdapter wizard,or by directly editing the JmsAdapter's *.jca file within the Composite project. 2.The "atypical" configurations: For some systems, there may be restrictions that do not allow the afore mentioned "typical" configurations be applied. For examples, some deployments may be required to configure the JMS Topic to be Replicated Distributed Topic rather than Partition Distributed Topic. We would like to discuss those scenarios here: Configuration A: The JMS Topic is NOT PDT In this case, you need to define the message selector 'NOT JMS_WL_DDForwarded' in the adapter's *.jca file, to filter out those "replicated" messages. Configuration B. The ClientIDPolicy=RESTRICTED In this case, you need separate factories for different composites. More accurately, you need separate factories for different *.jca file of JmsAdapter. References: Managing Durable Subscription WebLogic JMS Partitioned Distributed Topics and Shared Subscriptions JMS Troubleshooting: Configuring JMS Message Logging: Advanced Programming with Distributed Destinations Using the JMS Destination Availability Helper API

  Read the article

• Upgrading Fusion Middleware 11.1.1.x to 11.1.1.4

  - by James Taylor

  This is a follow on from my previous post where we upgraded 11.1.1.2 to 11.1.1.3. The instructions I provide here will work for Fusion Middleware 11.1.1.2 and 11.1.1.3 wanting to upgrade to 11.1.1.4. In this example I’m just upgrading SOA Suite on OEL 64bit but the steps will be the same, some of the downloads may be different based on your environment. To upgrade to 11.1.1.4 you need to have access to http://support.oracle.com as this is where the downloads reside. Oracle provides 11.1.1.4 as a standalone download so you can do a fresh install if required using OTN downloads (http://www.oracle.com/technetwork/indexes/downloads/index.html). The high level steps to upgrade are as follows: Download software Shutdown you SOA Environment Upgrade WLS to 11.1.1.4 Upgrade SOA Suite to 11.1.1.4 Upgrade OSB to 11.1.1.4 Upgrade MSD Schemas Identify the downloads you require for your install. You will need the WebLogic Server Upgrade and the additional product downloads. If you are using 64bit then use the generic version. The downloads are found from the following location - http://download.oracle.com/docs/html/E18749_01/download_readme.htm#BABDDIIC For the purpose of this post I downloaded the following patches 11060985 – WLS Server Generic 11060960 – SOA Suite 11061005 – OSB Suite You must also download the 11.1.1.4 RCU tool to upgrade the DB schemas. It is available via OTN, or, Oracle Support, I have provided the link from Oracle Support.  11060956 – RCU Make sure you have set the Java executable in your PATH e.g. export PATH=$JAVA_HOME/bin:$PATH  Make sure all your WebLogic environment has been shut down before performing the upgrade. Extract the WLS patch 11060985 to a temporary directory and start the installer java –jar wls1034_upgrade_generic.jar Please note if you are not running 64BIT then the upgrade executable will be just a bin file which you can execute directly. Chose the right Oracle home for your WebLogic Server install. In the Register for Security Updates you can enter your details or just click Next. If you do not enter details confirm that you don’t want to receive these updates Select the products you want to upgrade and select next. It is recommended that you accept the defaults. Confirm the directories that will be upgraded Upgrade of WLS ahs been completed   Extract your both SOA downloads to a temporary directory and run the installer found in Disk1 ./runInstaller -jreLoc /java/jdk1.6.0_20/jre Please note that the java location and version may be different for your environment Skip the Software Updates Ensure your system meets the prerequisites Set the Oracle home for your SOA install. You will be asked to confirm that you want to upgrade, click Yes Choose your application server. Since you are upgrading from 11.1.1.x you will be on WebLogic Start the Install Installation Upgrade of SOA Suite completed accept the default to finish.   In my environment I have OSB installed so I need to upgrade this next. If you don’t have SOA Suite you can go straight to completing the DB Schema updates at Step 24.  Extract the OSB upgrade files to a temporary directory and execute the installer found in the Disk1 folder. ./runInstaller -jreLoc /java/jdk1.6.0_20/jre Skip the software updates Select the Oracle home for your environment Accept the warning to continue the upgrade Point to the location of your WebLogic Server installation Install the OSB upgrade Upgrade has been completed accept the defaults Change directory to $MW_HOME/oracle_common/bin where the Patch Set Assistant is installed Execute the following command to update the MDS schema. Please not for my examples I have the context set to DEV. your may be different. This means that all my schemas are prefixed by DEV. ./psa -dbType Oracle -dbConnectString 'localhost:1521:xe' -dbaUserName sys -schemaUserName DEV_MDS You will be asked you passwords for sys and the schema Enter the database administrator password for "sys": Enter the schema password for schema user "DEV_MDS": Change directory to $MW_HOME/Oracle_SOA1/bin to where the Patch Set Assistant is installed for SOA Suite. Execute the following command to update the SOA and BAM schemas ./psa -dbType Oracle -dbConnectString 'localhost:1521:xe' -dbaUserName sys -schemaUserName DEV_SOAINFRA   To check that you have the installed correctly run the following SQL as sysdba. SELECT owner, version, status FROM schema_version_registry; OWNER                          VERSION                        STATUS ------------------------------ ------------------------------ ----------- DEV_MDS                        11.1.1.4.0                     VALID DEV_SOAINFRA                   11.1.1.4.0                     VALID Don’t stress if the versions are not all sitting at version 11.1.1.4 as not all schemas need to be updated. The key ones are MDS and SOAINFRA

  Read the article

• Clean up after Visual Studio

  - by psheriff

  As programmer’s we know that if we create a temporary file during the running of our application we need to make sure it is removed when the application or process is complete. We do this, but why can’t Microsoft do it? Visual Studio leaves tons of temporary files all over your hard drive. This is why, over time, your computer loses hard disk space. This blog post will show you some of the most common places where these files are left and which ones you can safely delete..NET Left OversVisual Studio is a great development environment for creating applications quickly. However, it will leave a lot of miscellaneous files all over your hard drive. There are a few locations on your hard drive that you should be checking to see if there are left-over folders or files that you can delete. I have attempted to gather as much data as I can about the various versions of .NET and operating systems. Of course, your mileage may vary on the folders and files I list here. In fact, this problem is so prevalent that PDSA has created a Computer Cleaner specifically for the Visual Studio developer.  Instructions for downloading our PDSA Developer Utilities (of which Computer Cleaner is one) are at the end of this blog entry.Each version of Visual Studio will create “temporary” files in different folders. The problem is that the files created are not always “temporary”. Most of the time these files do not get cleaned up like they should. Let’s look at some of the folders that you should periodically review and delete files within these folders.Temporary ASP.NET FilesAs you create and run ASP.NET applications from Visual Studio temporary files are placed into the <sysdrive>:\Windows\Microsoft.NET\Framework[64]\<vernum>\Temporary ASP.NET Files folder. The folders and files under this folder can be removed with no harm to your development computer. Do not remove the "Temporary ASP.NET Files" folder itself, just the folders underneath this folder. If you use IIS for ASP.NET development, you may need to run the iisreset.exe utility from the command prompt prior to deleting any files/folder under this folder. IIS will sometimes keep files in use in this folder and iisreset will release the locks so the files/folders can be deleted.Website CacheThis folder is similar to the ASP.NET Temporary Files folder in that it contains files from ASP.NET applications run from Visual Studio. This folder is located in each users local settings folder. The location will be a little different on each operating system. For example on Windows Vista/Windows 7, the folder is located at <sysdrive>:\Users\<UserName>\AppData\Local\Microsoft\WebsiteCache. If you are running Windows XP this folder is located at <sysdrive>:\ Documents and Settings\<UserName>\Local Settings\Application Data\Microsoft\WebsiteCache. Check these locations periodically and delete all files and folders under this directory.Visual Studio BackupThis backup folder is used by Visual Studio to store temporary files while you develop in Visual Studio. This folder never gets cleaned out, so you should periodically delete all files and folders under this directory. On Windows XP, this folder is located at <sysdrive>:\Documents and Settings\<UserName>\My Documents\Visual Studio 200[5|8]\Backup Files. On Windows Vista/Windows 7 this folder is located at <sysdrive>:\Users\<UserName>\Documents\Visual Studio 200[5|8]\.Assembly CacheNo, this is not the global assembly cache (GAC). It appears that this cache is only created when doing WPF or Silverlight development with Visual Studio 2008 or Visual Studio 2010. This folder is located in <sysdrive>:\ Users\<UserName>\AppData\Local\assembly\dl3 on Windows Vista/Windows 7. On Windows XP this folder is located at <sysdrive>:\ Documents and Settings\<UserName>\Local Settings\Application Data\assembly. If you have not done any WPF or Silverlight development, you may not find this particular folder on your machine.Project AssembliesThis is yet another folder where Visual Studio stores temporary files. You will find a folder for each project you have opened and worked on. This folder is located at <sysdrive>:\Documents and Settings\<UserName>Local Settings\Application Data\Microsoft\Visual Studio\[8|9].0\ProjectAssemblies on Windows XP. On Microsoft Vista/Windows 7 you will find this folder at <sysdrive>:\Users\<UserName>\AppData\Local\Microsoft\Visual Studio\[8|9].0\ProjectAssemblies.Remember not all of these folders will appear on your particular machine. Which ones do show up will depend on what version of Visual Studio you are using, whether or not you are doing desktop or web development, and the operating system you are using.SummaryTaking the time to periodically clean up after Visual Studio will aid in keeping your computer running quickly and increase the space on your hard drive. Another place to make sure you are cleaning up is your TEMP folder. Check your OS settings for the location of your particular TEMP folder and be sure to delete any files in here that are not in use. I routinely clean up the files and folders described in this blog post and I find that I actually eliminate errors in Visual Studio and I increase my hard disk space.NEW! PDSA has just published a “pre-release” of our PDSA Developer Utilities at http://www.pdsa.com/DeveloperUtilities that contains a Computer Cleaner utility which will clean up the above-mentioned folders, as well as a lot of other miscellaneous folders that get Visual Studio build-up. You can download a free trial at http://www.pdsa.com/DeveloperUtilities. If you wish to purchase our utilities through the month of November, 2011 you can use the RSVP code: DUNOV11 to get them for only $39. This is $40 off the regular price.NOTE: You can download this article and many samples like the one shown in this blog entry at my website. http://www.pdsa.com/downloads. Select “Tips and Tricks”, then “Developer Machine Clean Up” from the drop down list.Good Luck with your Coding,Paul Sheriff** SPECIAL OFFER FOR MY BLOG READERS **We frequently offer a FREE gift for readers of my blog. Visit http://www.pdsa.com/Event/Blog for your FREE gift!

  Read the article

• Simple-Talk development: a quick history lesson

  - by Michael Williamson

  Up until a few months ago, Simple-Talk ran on a pure .NET stack, with IIS as the web server and SQL Server as the database. Unfortunately, the platform for the site hadn’t quite gotten the love and attention it deserved. On the one hand, in the words of our esteemed editor Tony “I’d consider the current platform to be a “success”; it cost $10K, has lasted for 6 years, was finished, end to end in 6 months, and although we moan about it has got us quite a long way.” On the other hand, it was becoming increasingly clear that it needed some serious work. Among other issues, we had authors that wouldn’t blog because our current blogging platform, Community Server, was too painful for them to use. Forgetting about Simple-Talk for a moment, if you ask somebody what blogging platform they’d choose, the odds are they’d say WordPress. Regardless of its technical merits, it’s probably the most popular blogging platform, and it certainly seemed easier to use than Community Server. The issue was that WordPress is normally hosted on a Linux stack running PHP, Apache and MySQL — quite a difference from our Microsoft technology stack. We certainly didn’t want to rewrite the entire site — we just wanted a better blogging platform, with the rest of the existing, legacy site left as is. At a very high level, Simple-Talk’s technical design was originally very straightforward: when your browser sends an HTTP request to Simple-Talk, IIS (the web server) takes the request, does some work, and sends back a response. In order to keep the legacy site running, except with WordPress running the blogs, a different design is called for. We now use nginx as a reverse-proxy, which can then delegate requests to the appropriate application: So, when your browser sends a request to Simple-Talk, nginx takes that request and checks which part of the site you’re trying to access. Most of the time, it just passes the request along to IIS, which can then respond in much the same way it always has. However, if your request is for the blogs, then nginx delegates the request to WordPress. Unfortunately, as simple as that diagram looks, it hides an awful lot of complexity. In particular, the legacy site running on IIS was made up of four .NET applications. I’ve already mentioned one of these applications, Community Server, which handled the old blogs as well as managing membership and the forums. We have a couple of other applications to manage both our newsletters and our articles, and our own custom application to do some of the rendering on the site, such as the front page and the articles. When I say that it was made up of four .NET applications, this might conjure up an image in your mind of how they fit together: You might imagine four .NET applications, each with their own database, communicating over well-defined APIs. Sadly, reality was a little disappointing: We had four .NET applications that all ran on the same database. Worse still, there were many queries that happily joined across tables from multiple applications, meaning that each application was heavily dependent on the exact data schema that each other application used. Add to this that many of the queries were at least dozens of lines long, and practically identical to other queries except in a few key spots, and we can see that attempting to replace one component of the system would be more than a little tricky. However, the problems with the old system do give us a good place to start thinking about desirable qualities from any changes to the platform. Specifically: Maintainability — the tight coupling between each .NET application made it difficult to update any one application without also having to make changes elsewhere Replaceability — the tight coupling also meant that replacing one component wouldn’t be straightforward, especially if it wasn’t on a similar Microsoft stack. We’d like to be able to replace different parts without having to modify the existing codebase extensively Reusability — we’d like to be able to combine the different pieces of the system in different ways for different sites Repeatable deployments — rather than having to deploy the site manually with a long list of instructions, we should be able to deploy the entire site with a single command, allowing you to create a new instance of the site easily whether on production, staging servers, test servers or your own local machine Testability — if we can deploy the site with a single command, and each part of the site is no longer dependent on the specifics of how every other part of the site works, we can begin to run automated tests against the site, and against individual parts, both to prevent regressions and to do a little test-driven development In the next part, I’ll describe the high-level architecture we now have that hopefully brings us a little closer to these five traits.

  Read the article

• Geocaching - World wide treasure hunt

  I'm not quite sure how I came across this topic but actually I find it absolutely interesting, challenging and most of all a great fun for the family and friends. The interesting part is for sure that you can follow other peoples treasures and their preferred locations where a cache might be hidden. Of course, it wont be easy to find a cache after all. Sometimes there are even 'mystery caches' which have either riddles, further instructions or little brain games for you in order to find the actual cache - that's the challenge. And last but not least, those caches are hidden outdoor. A great experience to explore nature either on your own, or your family especially with children, or as a treasure hunting pack with a couple of friends. What is geocaching? It's a high-tech outdoor treasure hunting game that's a great way to explore the world with friends, family or on your own. Participants use GPS-enabled devices to locate hidden containers called geocaches. There are over one million geocaches hidden around the world today, waiting for you to find them. Visit Geocaching.com to search for geocaches near you.(Source: Referral Email of geocaching.com) Checkout the Geocaching 101 for further details and information. They also provide a video channel on YouTube. Which equipment do I need? Any GPS-enabled device is sufficient to go onto the hunt. I'm going to start our geocaching experience equipped with my Samsung Galaxy Tab. Additionally, I installed a geocaching.com client called c:geo that hopefully assists me soon. Combined with a map app like Google Maps and a nice Compass app you should be fully equipped and ready to go. I guess, that even a car navigation system is perfect for that task. Later on, with more experience and demand for technology (or precision) it might be interesting to opt-in for a pure GPS device, like a Garmin or any other brand on the market. {loadposition content_adsense} What is a geocache and what does it contain? In its simplest form, a cache always contains a logbook or logsheet for you to log your find. Larger caches may contain a logbook and any number of items. These items turn the adventure into a true treasure hunt. You never know what the cache owner or visitors to the cache may have left for you to enjoy. Remember, if you take something, leave something of equal or greater value in return. It is recommended that items in a cache be individually packaged in a clear, zipped plastic bag to protect them from the elements. Finding your first geocache Well, first you have to have interest to pick up the challenge. Then you have to check out the Geocache directory on geocaching.com. They have recommendations for beginner's caches but you are free to choose any. Actually, we have a Mystery Cache very close to our base, and I guess that we are going for that one on our first trip. Anyway, there is a very informative guide on the website which should answer all your questions about starting your new outdoor adventure. For sure, it's going to be rewarding. Team up with friends and family Especially as a beginner there might be misunderstandings in handling the GPS coordinates, the compass, or the map, and even finding the container at the documented position isn't easy in the first place. Luckily, there are logbook reports online from other hunters, and most of the time there are even 'spoiler' images available. But also bear in mind, that a geocache might have been removed or is lost due to unconscious people or whatever other reasons. Don't be disappointed in case that you can't find anything... There be nothing anymore. A general recommendation in this case would be to replace the missing container with a new one, and give feedback to the original owner about the state of that particular location. After all, it's about fun and active participation in a world-wide community. Geocaches in Mauritius? Yes, there are currently about 45 geocaches spread all over the island, and even a single in Rodriguez - that's gonna be a tough one. Hopefully, we will get increasing numbers as Geocaching.com allows, no better, even encourages you to hide new containers at your locations of choice. I think this is going to be real fun for us during the upcoming weeks and months. Especially, when we are travelling to other countries and transfer so-called trackable items between geocaches. On my first impression, Geocaching.com seems to be very mature, open and community-oriented. There are literally hundreds of thousands geocache 'hunters' all over the world. And usually finding a container remote from your home is very rewarding. I'll keep you updated in these matters during the next months to come...

  Read the article

• Replication - between pools in the same system

  - by Steve Tunstall

  OK, I fully understand that's it's been a LONG time since I've blogged with any tips or tricks on the ZFSSA, and I'm way behind. Hey, I just wrote TWO BLOGS ON THE SAME DAY!!! Make sure you keep scrolling down to see the next one too, or you may have missed it. To celebrate, for the one or two of you out there who are still reading this, I got something for you. The first TWO people who make any comment below, with your real name and email so I can contact you, will get some cool Oracle SWAG that I have to give away. Don't get excited, it's not an iPad, but it pretty good stuff. Only the first two, so if you already see two below, then settle down. Now, let's talk about Replication and Migration.  I have talked before about Shadow Migration here: https://blogs.oracle.com/7000tips/entry/shadow_migrationShadow Migration lets one take a NFS or CIFS share in one pool on a system and migrate that data over to another pool in the same system. That's handy, but right now it's only for file systems like NFS and CIFS. It will not work for LUNs. LUN shadow migration is a roadmap item, however. So.... What if you have a ZFSSA cluster with multiple pools, and you have a LUN in one pool but later you decide it's best if it was in the other pool? No problem. Replication to the rescue. What's that? Replication is only for replicating data between two different systems? Who told you that? We've been able to replicate to the same system now for a few code updates back. These instructions below will also work just fine if you're setting up replication between two different systems. After replication is complete, you can easily break replication, change the new LUN into a primary LUN and then delete the source LUN. Bam. Step 1- setup a target system. In our case, the target system is ourself, but you still have to set it up like it's far away. Go to Configuration-->Services-->Remote Replication. Click the plus sign and setup the target, which is the ZFSSA you're on now. Step 2. Now you can go to the LUN you want to replicate. Take note which Pool and Project you're in. In my case, I have a LUN in Pool2 called LUNp2 that I wish to replicate to Pool1.  Step 3. In my case, I made a Project called "Luns" and it has LUNp2 inside of it. I am going to replicate the Project, which will automatically replicate all of the LUNs and/or Filesystems inside of it.  Now, you can also replicate from the Share level instead of the Project. That will only replicate the share, and not all the other shares of a project. If someone tells you that if you replicate a share, it always replicates all the other shares also in that Project, don't listen to them.Note below how I can choose not only the Target (which is myself), but I can also choose which Pool to replicate it to. So I choose Pool1.  Step 4. I did not choose a schedule or pick the "Continuous" button, which means my replication will be manual only. I can now push the Manual Replicate button on my Actions list and you will see it start. You will see both a barber pole animation and also an update in the status bar on the top of the screen that a replication event has begun. This also goes into the event log.  Step 5. The status bar will also log an event when it's done. Step 6. If you go back to Configuration-->Services-->Remote Replication, you will see your event. Step 7. Done. To see your new replica, go to the other Pool (Pool1 for me), and click the "Replica" area below the words "Filesystems | LUNs" Here, you will see any replicas that have come in from any of your sources. It's a simple matter from here to break the replication, which will change this to a "Local" LUN, and then delete the original LUN back in Pool2. Ok, that's all for now, but I promise to give out more tricks sometime in November !!! There's very exciting stuff coming down the pipe for the ZFSSA. Both new hardware and new software features that I'm just drooling over. That's all I can say, but contact your local sales SC to get a NDA roadmap talk if you want to hear more.   Happy Halloween,Steve 

  Read the article

• Installing Catalyst 11.6 for an ATI HD 6970

  - by David Oliver

  Ubuntu Maverick 10.10 is displaying the desktop okay (though limited to 1600x1200) after my having installed my new HD 6970 card, so I'm now trying to install the proprietary driver (I understand the open source one requires a more recent kernel than that in Maverick). The proprietary driver under 'Additional Drivers' resulted in a black screen on boot, so I deactivated and am trying to follow the manual install instructions at the cchtml Ubuntu Maverick Installation Guide. When I try to create the .deb packages with: sh ati-driver-installer-11-6-x86.x86_64.run --buildpkg Ubuntu/maverick I get: david@skipper:~/catalyst11.6$ sh ati-driver-installer-11-6-x86.x86_64.run --buildpkg Ubuntu/maverick Created directory fglrx-install.oLN3ux Verifying archive integrity... All good. Uncompressing ATI Catalyst(TM) Proprietary Driver-8.861......................... ===================================================================== ATI Technologies Catalyst(TM) Proprietary Driver Installer/Packager ===================================================================== Generating package: Ubuntu/maverick Package build failed! Package build utility output: ./packages/Ubuntu/ati-packager.sh: 396: debclean: not found dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.64Vzxk dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Cleaning in directory . /usr/bin/fakeroot: line 176: debian/rules: Permission denied debuild: fatal error at line 1319: couldn't exec fakeroot debian/rules: dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.QEmIld dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Cleaning in directory . Can't exec "debian/rules": Permission denied at /usr/bin/debuild line 1314. debuild: fatal error at line 1313: couldn't exec debian/rules: Permission denied dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.xtY6vC dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Cleaning in directory . /usr/bin/fakeroot: line 176: debian/rules: Permission denied debuild: fatal error at line 1319: couldn't exec fakeroot debian/rules: dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.oYWICI dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Removing temporary directory: fglrx-install.oLN3ux I've installed devscripts which has debclean in it. I've tried running the command with and without sudo. I'm not experienced with installing from downloads/source, but it seems like the file debian/source isn't being set to be executable when it needs to be. If I extract only, without using the package builder command, debian/rules is 744. As to what to do next, I'm stumped. Many thanks.

  Read the article

• Fusion HCM SaaS – Integration

  - by Kiran Mundy

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Fusion HCM SaaS – Integration A typical implementation pattern we’re seeing with Fusion Apps early adopters is implementing a few Fusion HCM applications that bring the most benefit to their company with the least disruption to existing programs and interfaces. Very often this ends up being Fusion Goals & Performance, Talent, Compensation or Benefits, often with Taleo for recruiting. The implementation picture looks like what you see below: Here, you can see that all the “downstream integrations” from the On-Premise Core HR, are unaffected because the master for employee data is still your On-Premise Core HR system – all updates and new hires are made here (although they may be fed in from Taleo to start with). As a second phase when customers migrate Core HR to Fusion HCM, they have to come up with a strategy to manage integrations to all their downstream applications that require employee details. For customers coming from EBS HR, a short term strategy that allows for minimal impact, is to extract employee data from Fusion (Via HCM Extract), and load the shared EBS HR tables (which are part of an EBS Financials install anyways), and let your downstream integrations continue to function based on this data as shown below. If you are not coming from EBS HR and there are license implications, you may want to consider: Creating an On-Premise warehouse for extracting data from Fusion Apps. Leveraging Fusion Apps Web Services (available to SaaS customers starting R7) to directly retrieve/write data to Fusion Apps. Integration Tools File Based Loader This is the primary mechanism for loading HCM data (both initial load and incremental updates) into Fusion HCM. Employee & related data can be uploaded into Fusion HCM using File Based Loader. Note that ability to schedule File Based Loader to run on a pre-defined schedule will be available as a patch on top of Rel 5. Hr2Hr has been deprecated in favor of File Based Loader, but for existing customers using Hr2Hr, here are some sample scripts that show how to get more informative error messages. They can be run by creating data model sql queries in BI Publisher. The scripts currently have hard coded values for request id and loader batch id, which your developer will need to update to the correct values for you. The BI Publisher Training Session recorded on Apr 18th is available here (under "Recordings"). This will enable a somewhat technical resource to create a data model sql query. Links to Documentation & Traning Reference documentation for File Based Loader on docs.oracle.com FBL 1.1 MOS Doc Id 1533860.1 Sample demo data files for File Based Loader HCM SaaS Integrations ppt and recording. EBS api's Loading Information into EBS Full or Shared HCM This could be candidate information being loaded from Taleo into EBS or  Employee information being loaded from Fusion HCM into an EBS shared HR install (for downstream applications & EBS Financials). Oracle HRMS Product Family Publicly Callable Business Process APIs (A Reference Consolidation) [ID 216838.1] This is a guide to the EBS R12 Integration Repository accessible from an EBS instance. EBS HRMS Publicly Callable Business Process APIs in Release 11i & 12 [ID 121964.1] Fusion HCM Extract Fusion HCM Extract is the primary mechanism used to extract employee information from Fusion HCM. Refer to the "Configure Identity Sync" doc on MOS  for additional mechanisms. Additional documentation (you'll need an oracle.com account to access) HCM Extracts User Guides (Rel 4 & 5) HCM Extract Entity/Attributes (Rel 5) HCM Extract User Guide (Rel 5) If you don’t have an oracle.com account, download the zipped HCM Extract Rel 5 Docs (Click on File --> Download on next screen). View Training Recordings on Fusion HCM Extract Benefits Extract To setup the benefits extract, refer to the following guide. Page 2-15 of the User Documentation describes how to use the benefits extract. Benefit enrollments can also be uploaded into Fusion Benefits. Instructions are here along with a sample upload file. However, if the defined benefits extract does not meet your requirements, you can use BI Publisher (Link to BI Publisher presentation recording from Apr 18th) to create your own version of Benefits extract. You can start with the data model query underlying the benefits extract. Payroll Interface Fusion Payroll Interface enables you to capture personal payroll information, such as earnings and deductions, along with other data from Oracle Fusion Human Capital Management, and send that information to a third-party payroll provider. Documentation: Payroll interface guide Sample file DBI's used for the payroll interface.Usage Patterns always accessible @ http://www.finapps.com Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";}

  Read the article

• SPARC M7 Chip - 32 cores - Mind Blowing performance

  - by Angelo-Oracle

  The M7 Chip Oracle just announced its Next Generation Processor at the HotChips HC26 conference. As the Tech Lead in our Systems Division's Partner group, I had a front row seat to the extraordinary price performance advantage of Oracle current T5 and M6 based systems. Partner after partner tested  these systems and were impressed with it performance. Just read some of the quotes to see what our partner has been saying about our hardware. We just announced our next generation processor, the M7. This has 32 cores (up from 16-cores in T5 and 12-cores in M6). With 20 nm technology  this is our most advanced processor. The processor has more cores than anything else in the industry today. After the Sun acquisition Oracle has released 5 processors in 4 years and this is the 6th.  The S4 core  The M7 is built using the foundation of the S4 core. This is the next generation core technology. Like its predecessor, the S4 has 8 dynamic threads. It increases the frequency while maintaining the Pipeline depth. Each core has its own fine grain power estimator that keeps the core within its power envelop in 250 nano-sec granularity. Each core also includes Software in Silicon features for Application Acceleration Support. Each core includes features to improve Application Data Integrity, with almost no performance loss. The core also allows using part of the Virtual Address to store meta-data.  User-Level Synchronization Instructions are also part of the S4 core. Each core has 16 KB Instruction and 16 KB Data L1 cache. The Core Clusters  The cores on the M7 chip are organized in sets of 4-core clusters. The core clusters share  L2 cache.  All four cores in the complex share 256 KB of 4 way set associative L2 Instruction Cache, with over 1/2 TB/s of throughput. Two cores share 256 KB of 8 way set associative L2 Data Cache, with over 1/2 TB/s of throughput. With this innovative Core Cluster architecture, the M7 doubles core execution bandwidth. to maximize per-thread performance.  The Chip  Each  M7 chip has 8 sets of these core-clusters. The chip has 64 MB on-chip L3 cache. This L3 caches is shared among all the cores and is partitioned into 8 x 8 MB chunks. Each chunk is  8-way set associative cache. The aggregate bandwidth for the L3 cache on the chip is over 1.6TB/s. Each chip has 4 DDR4 memory controllers and can support upto 16 DDR4 DIMMs, allowing for 2 TB of RAM/chip. The chip also includes 4 internal links of PCIe Gen3 I/O controllers.  Each chip has 7 coherence links, allowing for 8 of these chips to be connected together gluelessly. Also 32 of these chips can be connected in an SMP configuration. A potential system with 32 chips will have 1024 cores and 8192 threads and 64 TB of RAM.  Software in Silicon The M7 chip has many built in Application Accelerators in Silicon. These features will be exposed to our Software partners using the SPARC Accelerator Program.  The M7  has built-in logic to decompress data at the speed of memory access. This means that applications can directly work on compressed data in memory increasing the data access rates. The VA Masking feature allows the use of part of the virtual address to store meta-data.  Realtime Application Data Integrity The Realtime Application Data Integrity feature helps applications safeguard against invalid, stale memory reference and buffer overflows. The first 4-bits if the Pointer can be used to store a version number and this version number is also maintained in the memory & cache lines. When a pointer accesses memory the hardware checks to make sure the two versions match. A SEGV signal is raised when there is a mismatch. This feature can be used by the Database, applications and the OS.  M7 Database In-Memory Query Accelerator The M7 chip also includes a In-Silicon Query Engines.  These accelerate tasks that work on In-Memory Columnar Vectors. Oracle In-Memory options stores data in Column Format. The M7 Query Engine can speed up In-Memory Format Conversion, Value and Range Comparisons and Set Membership lookups. This engine can work on Compressed data - this means not only are we accelerating the query performance but also increasing the memory bandwidth for queries.  SPARC Accelerated Program  At the Hotchips conference we also introduced the SPARC Accelerated Program to provide our partners and third part developers access to all the goodness of the M7's SPARC Application Acceleration features. Please get in touch with us if you are interested in knowing more about this program. 

  Read the article

• [GEEK SCHOOL] Network Security 3: Windows Defender and a Malware-Free System

  - by Ciprian Rusen

  In this second lesson we are going to talk about one of the most confusing security products that are bundled with Windows: Windows Defender. In the past, this product has had a bad reputation and for good reason – it was very limited in its capacity to protect your computer from real-world malware. However, the latest version included in Windows 8.x operating systems is much different than in the past and it provides real protection to its users. The nice thing about Windows Defender in its current incarnation, is that it protects your system from the start, so there are never gaps in coverage. We will start this lesson by explaining what Windows Defender is in Windows 7 and Vista versus what it is in Windows 8, and what product to use if you are using an earlier version. We next will explore how to use Windows Defender, how to improve its default settings, and how to deal with the alerts that it displays. As you will see, Windows Defender will have you using its list of quarantined items a lot more often than other security products. This is why we will explain in detail how to work with it and remove malware for good or restore those items that are only false alarms. Lastly, you will learn how to turn off Windows Defender if you no longer want to use it and you prefer a third-party security product in its place and then how to enable it back, if you have changed your mind about using it. Upon completion, you should have a thorough understanding of your system’s default anti-malware options, or how to protect your system expeditiously. What is Windows Defender? Unfortunately there is no one clear answer to this question because of the confusing way Microsoft has chosen to name its security products. Windows Defender is a different product, depending on the Windows operating system you are using. If you use Windows Vista or Windows 7, then Windows Defender is a security tool that protects your computer from spyware. This but one form of malware made out of tools and applications that monitor your movements on the Internet or the activities you make on your computer. Spyware tends to send the information that is collected to a remote server and it is later used in all kinds of malicious purposes, from displaying advertising you don’t want, to using your personal data, etc. However, there are many other types of malware on the Internet and this version of Windows Defender is not able to protect users from any of them. That’s why, if you are using Windows 7 or earlier, we strongly recommend that you disable Windows Defender and install a more complete security product like Microsoft Security Essentials, or third-party security products from specialized security vendors. If you use Windows 8.x operating systems, then Windows Defender is the same thing as Microsoft Security Essentials: a decent security product that protects your computer in-real time from viruses and spyware. The fact that this product protects your computer also from viruses, not just from spyware, makes a huge difference. If you don’t want to pay for security products, Windows Defender in Windows 8.x and Microsoft Security Essentials (in Windows 7 or earlier) are good alternatives. Windows Defender in Windows 8.x and Microsoft Security Essentials are the same product, only their name is different. In this lesson, we will use the Windows Defender version from Windows 8.x but our instructions apply also to Microsoft Security Essentials (MSE) in Windows 7 and Windows Vista. If you want to download Microsoft Security Essentials and try it out, we recommend you to use this page: Download Microsoft Security Essentials. There you will find both 32-bit and 64-bit editions of this product as well versions in multiple languages. How to Use and Configure Windows Defender Using Windows Defender (MSE) is very easy to use. To start, search for “defender” on the Windows 8.x Start screen and click or tap the “Windows Defender” search result. In Windows 7, search for “security” in the Start Menu search box and click “Microsoft Security Essentials”. Windows Defender has four tabs which give you access to the following tools and options: Home – here you can view the security status of your system. If everything is alright, then it will be colored in green. If there are some warnings to consider, then it will be colored in yellow, and if there are threats that must be dealt with, everything will be colored in red. On the right side of the “Home” tab you will find options for scanning your computer for viruses and spyware. On the bottom of the tab you will find information about when the last scan was performed and what type of scan it was. Update – here you will find information on whether this product is up-to-date. You will learn when it was last updated and the versions of the definitions it is using. You can also trigger a manual update. History – here you can access quarantined items, see which items you’ve allowed to run on your PC even if they were identified as malware by Windows Defender, and view a complete list with all the malicious items Windows Defender has detected on your PC. In order to access all these lists and work with them, you need to be signed in as an administrator. Settings – this is the tab where you can turn on the real-time protection service, exclude files, file types, processes, and locations from its scans as well as access a couple of more advanced settings. The only difference between Windows Defender in Windows 8.x and Microsoft Security Essentials (in Windows 7 or earlier) is that, in the “Settings” tab, Microsoft Security Essentials allows you to set when to run scheduled scans while Windows Defender lacks this option.

  Read the article

• Silverlight Cream for January 11, 2011 -- #1024

  - by Dave Campbell

  1,000 blogposts is quite a few, but to die-hard geeks, 1000 isn't the number... 1K is the number, and today is my 1K blogpost! I've been working up to this for at least 11 months. Way back at MIX10, I approached some vendors about an idea I had. A month ago I contacted them and others, and everyone I contacted was very generous and supportive of my idea. My idea was not to run a contest, but blog as normal, and whoever ended up on my 1K post would get some swag... and I set a cut-off at 13 posts. So... blogging normally, I had some submittals, and then ran my normal process to pick up the next posts until I hit a total of 13. To provide a distribution channel for the swag, everyone on the list, please send me your snail mail (T-shirts) and email (licenses) addresses as soon as possible.   I'd like to thank the following generous sponsors for their contributions to my fun (in alphabetic order): and Rachel Hawley for contributing 4 Silverlight control sets First Floor Software and Koen Zwikstra for contributing 13 licenses for Silverlight Spy and Sara Faatz/Jason Beres for contributing 13 licenses for Silverlight Data Visualization controls and Svetla Stoycheva for contributing T-Shirts for everyone on the post and Ina Tontcheva for contributing 13 licenses for RadControls for Silverlight + RadControls for Windows Phone and Charlene Kozlan for contributing 1 combopack standard, 2 DataGrid for Silverlight, and 2 Listbox for Silverlight Standard And now finally...in this Issue: Nigel Sampson, Jeremy Likness, Dan Wahlin, Kunal Chowdhurry, Alex Knight, Wei-Meng Lee, Michael Crump, Jesse Liberty, Peter Kuhn, Michael Washington, Tau Sick, Max Paulousky, Damian Schenkelman Above the Fold: Silverlight: "Demystifying Silverlight Dependency Properties" Dan Wahlin WP7: "Using Windows Phone Gestures as Triggers" Nigel Sampson Expression Blend: "PathListBox: making data look cool" Alex Knight From SilverlightCream.com: Using Windows Phone Gestures as Triggers Nigel Sampson blogged about WP7 Gestures, the Toolkit, and using Gestures as Triggers, and actually makes it looks simple :) Jounce Part 9: Static and Dynamic Module Management Jeremy Likness has episode 9 of his explanation of his MVVM framework, Jounce, up... and a big discussion of Modules and Module Management from a Jounce perspective. Demystifying Silverlight Dependency Properties Dan Wahlin takes a page from one of his teaching opportunities, and shares his knowledge of Dependency Properties with us... beginning with what they are, defining them in code, and demonstrating their use. Customizing Silverlight ChildWindow Style using Blend Kunal Chowdhurry has a great post up about getting your Child Windows to match the look & feel of the rest of youra app... plus a bunch of Blend goodness thrown in. PathListBox: making data look cool File this post by Alex Knight in the 'holy crap' file along with the others in this series! ... just check out that cool Ticker Style Path ListBox at the top of the blog... too cool! Web Access in Windows Phone 7 Apps Wei-Meng Lee has the 3rd part of his series on WP7 development up and in this one is discussing Web Access... I mean *discussing* it... tons of detail, code, and explanation... great post. Prevent your Silverlight XAP file from caching in your browser. Michael Crump helps relieve stress on Silverlight developers everywhere by exploring how to avoid caching of your XAP in the browser... (WPFS) MVVM Light Toolkit: Soup To Nuts Part I Jesse Liberty continues his Windows Phone from Scratch series with a new segment exploring Laurent Bugnion's MVVMLight Toolkit beginning with acquiring and installing the toolkit, then proceeds to discuss linking the View and ViewModel, the ViewModel Locator, and page navigation. Silverlight: Making a DateTimePicker Peter Kuhn attacks a problem that crops up on the forums a lot -- a DateTimePicker control for Silverlight... following the "It's so simple to build one yourself" advice, he did so, and provides the code for all of us! Windows Phone 7 Animated Button Press Michael Washington took exception to button presses that gave no visual feedback and produced a behavior that does just that. Using TweetSharp in a Windows Phone 7 app Tau Sick demonstrates using TweetSharp to put a twitter feed into a WP7 app, as he did in "Hangover Helper"... all the instructions from getting Tweeetshaprt to the code necessary. Bindable Application Bar Extensions for Windows Phone 7 Max Paulousky has a post discussing some real extensions to the ApplicationBar for WP7.. he begins with a bindable application bar by Nicolas Humann that I've missed, probably because his blog is in French... and extends it to allow using DelegateCommand. How to: Load Prism modules packaged in a separate XAP file in an OOB application Damian Schenkelman posts about Prism, AppModules in separate XAPs and running OOB... if you've tried this, you know it's a hassle.. Damian has the solution. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Record Screen Activity with CamStudio

  - by Asian Angel

  Sometimes a visual demonstration works much better than a list of instructions. If you need to make a demo video for family and/or friends then you might want to have a look at CamStudio. Using CamStudio To get properly set up you will need to install two different files (the main program followed by the codec). Once that is done you are ready to get started. When you start the program you will see a surprisingly small window. Notice the highlighted Record to text…it serves as a visual indicator for the video type selected for recording. Before you start creating a video it would be a good idea to look through some of the settings. The first one to look at is the region or area that you want to record. Next you will want to look through the video options since these will affect the quality and final size of your video files. The default setting for quality is 70…adjust that to the level that best suits your needs. Note: For our example we maxed out the various video settings for best quality. On our system Microsoft Video 1 was listed as the default compressor but as you can see there were other options available. You can configure the settings for the compressor you want to use if desired. Keep in mind that each compressor will have unique settings of their own, so if you change it, be certain to go back and check. We decided to use the CamStudio Lossless Codec for our example (it gave the best results while trying the software). Going back to the main window you can toggle back and forth between .avi and .swf output using the last button. Once you are satisfied with the settings click on the red record button to start. If you need to pause while recording or stop recording click on the system tray icon and select the appropriate command. When you are finished recording, you will be presented with the save file window. Browse for the desired save location and name your new file. Once you have saved the file the movie player window will automatically open so that you view your new video. Our sample video shown here is at 50% of original size so may look slightly “gritty”. The detail was much better at 100%. If you decide to record and save as .swf the process will be identical to recording in .avi format until the movie player window opens. At that time the conversion process from .avi to .swf will begin. When complete you will have a new flash video and html file that goes with it. Depending on which browser you have set as default, you may run into a small problem when the preview for your new .swf file tries to open. There is a small bug in the generated html file. You can use this work-around or… Just open the .swf file directly in your favorite browser. Conclusion CamStudio may not produce the highest quality videos, but it’s free and does a very nice job nonetheless. If you are working on a tight budget or only need to make an occasional video then CamStudio is a very sensible choice. Links Download CamStudio Stable Version & CamStudio Codec *Download links are approximately half-way down the page. Download CamStudio Stable Version & CamStudio Codec at SourceForge *Beta version also available here. Similar Articles Productive Geek Tips Get the Classic Style Network Activity Indicator Back in Windows 7How To Copy a DVD with VLC 1.0ALLCapture 3.0 [Review]Listen and Record Over 12,000 Online Radio Stations with RadioSureGeek Reviews: Play And Record Internet Radio With Screamer Radio TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate

  Read the article

• So you want a French Site?

  - by juanlarios

  I thought I would write a quick write up of how to create a french site in SharePoint 2007. I'm not talking about a Variation but just a plain French Site from the ground up. There were some gotchas that I felt were worth blogging about. First:  go to Microsoft Telnet Article and follow the install instructions. Make sure that when you get to the download page that you select "French" as part of the drop down and you download and install the right language pack. I noticed that if you did not click the "change" button enven though I selected the 'french' language pack, it reverted back to the english language pack.   Second: You will notice a couple of things. When you go to central admin you will see the following:    Now you can pick between french site or english. You will get this if you install other language packs and they will be listed in the drop down. You will notice that you now have french headings and frech listings of sites. You see "Publishing" as a heading because I have a custom site definition that I deployed as a french site. Third: As you start navigating around and trying to create document libraries or sites you will start getting errors. Errors like the following: "Cannot make a cache safe URL for "SelectorControls.js", file not found. Please verify that the file exists under the layouts directory. " Troubleshoot issues with Windows SharePoint Services. Once you resolve the issue with this "js" file, you will find that there are other js files that are missing. The only problem is that if you are not fluent in French or the language you are trying to deploy, Well, you'll have a tough time understanding error messages as they will all be in the new language you are trying to deploy. So let's just talk about what happened when you installed the language pack. In the 12 Hive:  12/Template    you will now see a 1033 folder and a 1036 folder. The 1036 folder is the folder that was created and added as part of the language pack. What the above error is saying is that now that it's looking at the 1036 folder, well, it's missing some files. The nice thing is that these files are included in the 1033 folder (which is the English Language Pack). Simply copy and paste the controls from the one folder to the other. There will be more than one conflict so you will have to move serveral controls over. Can't remember how many but simply add them as error messages come up. I had to add some navigation controls and some content selectors.   Now that's all that you need to install the Frech Language pack anc reate site collections that are entirely in a another language. Do not mistake this with Variations, where you can have multiple language sites. For those of you doing a little bit extra with this, let me share what I was doing extra and what I needed to get it working for me. I had had a custom site definition which was obviously not showing up in my selection of french sites. I was under the impression that all sites in English would show up in french and that the sites were simply routed to a new Resource file for french content. And that is the case but there is a little extra that needs to be done if you have a custom site definition deployed:  First: Under hive 12/Template/1033/XML  there is a listing of site definition files that are deployed to the English side of things. If you navigate to 12/Template/1036/XML  and open one of the site definitions you will see that they are similar and reference the existing site definitions installed on the server, except that they have some french added to descriptions and names. Simply copy the xml file of your custom template to the 1036 folder to have it show up as a selection when you select French as the dropdown entry when create a site colleciton. You can go ahead and change the description and name to suit the language it's under.    Second: As part of my site definition, I packaed up several list templates, that were saved as STP files. When you navigate to the list template listing, well, the templates are for English sites, not French so I cannot create document libraries based on the template. What now? well here comes KWIzCom to the rescue! They seem to have put out a "STP language converter" where you can take a site template or list template and convert it to any target language you are after. It's a free download, Use it and you're good to go.  One thing I will mention is that when I convereted the English documents I whent ahead and converted them to French-Canadien. And it didn't work! so I finally figured out that the French Version it was expecting in the french site was "French-France". Don't know why that is, it's just what needs to be done to get that working. When I did that, I was able to use the List templates that I created in the English site for the French Site.   Hope it helps , good luck!

  Read the article

• How to Use RDA to Generate WLS Thread Dumps At Specified Intervals?

  - by Daniel Mortimer

  Introduction There are many ways to generate a thread dump of a WebLogic Managed Server. For example, take a look at: Taking Thread Dumps - [an excellent blog post on the Middleware Magic site]or  Different ways to take thread dumps in WebLogic Server (Document 1098691.1) There is another method - use Remote Diagnostic Agent! The solution described below is not documented, but it is relatively straightforward to execute. One advantage of using RDA to collect the thread dumps is RDA will also collect configuration, log files, network, system, performance information at the same time. Instructions 1. Not familiar with Remote Diagnostic Agent? Take a look at my previous blog "Resolve SRs Faster Using RDA - Find the Right Profile" 2. Choose a profile, which includes the WebLogic Server data collection modules (for example the profile "WebLogicServer"). At RDA setup time you should see the prompt below: ------------------------------------------------------------------------------- S301WLS: Collects Oracle WebLogic Server Information ------------------------------------------------------------------------------- Enter the location of the directory where the domains to analyze are located (For example in UNIX, <BEA Home>/user_projects/domains or <Middleware Home>/user_projects/domains) Hit 'Return' to accept the default (/oracle/11AS/Middleware/user_projects/domains) > For a successful WLS connection, ensure that the domain Admin Server is up and running. Data Collection Type:   1  Collect for a single server (offline mode)   2  Collect for a single server (using WLS connection)   3  Collect for multiple servers (using WLS connection) Enter the item number Hit 'Return' to accept the default (1) > 2 Choose option 2 or 3. Note: Collect for a single server or multiple servers using WLS connection means that RDA will attempt to connect to execute online WLST commands against the targeted server(s). The thread dumps are collected using the WLST function - "threadDumps()". If WLST cannot connect to the managed server, RDA will proceed to collect other data and ignore the request to collect thread dumps. If in the final output you see no Thread Dump menu item, then it's likely that the managed server is in a state which prevents new connections to it. If faced with this scenario, you would have to employ alternative methods for collecting thread dumps. 3. The RDA setup will create a setup.cfg file in the RDA_HOME directory. Open this file in an editor. You will find the following parameters which govern the number of thread dumps and thread dump interval. #N.Number of thread dumps to capture WREQ_THREAD_DUMP=10 #N.Thread dump interval WREQ_THREAD_DUMP_INTERVAL=5000 The example lines above show the default settings. In other words, RDA will collect 10 thread dumps at 5000 millisecond (5 second) intervals. You may want to change this to something like: #N.Number of thread dumps to capture WREQ_THREAD_DUMP=10 #N.Thread dump interval WREQ_THREAD_DUMP_INTERVAL=30000 However, bear in mind, that such change will increase the total amount of time it takes for RDA to complete its run. 4. Once you are happy with the setup.cfg, run RDA. RDA will collect, render, generate and package all files in the output directory. 5. For ease of viewing, open up the RDA Start html file - "xxxx__start.htm". The thread dumps can be found under the WLST Collections for the target managed server(s). See screenshots belowScreenshot 1:RDA Start Page - Main Index Screenshot 2: Managed Server Sub Index Screenshot 3: WLST Collections Screenshot 4: Thread Dump Page - List of dump file links Screenshot 5: Thread Dump Dat File Link Additional Comment: A) You can view the thread dump files within the RDA Start Page framework, but most likely you will want to download the dat files for in-depth analysis via thread dump analysis tools such as: Thread Dump Analyzer -  Samurai - a GUI based tail , thread dump analysis tool If you are new to thread dump analysis - take a look at this recorded Support Advisor Webcast  Oracle WebLogic Server: Diagnosing Performance Issues through Java Thread Dumps[Slidedeck from webcast in PDF format]B) I have logged a couple of enhancement requests for the RDA Development Team to consider: Add timestamp to dump file links, dat filename and at the top of the body of the dat file Package the individual thread dumps in a zip so all dump files can be conveniently downloaded in one go.

  Read the article

• Deep in the Heart of Texas

  - by Applications User Experience

  Author: Erika Webb, Manager, Fusion Applications UX User Assistance When I was first working in the usability field, the only way I could consider conducting a usability study was to bring a potential user to a lab environment where I could show them whatever I was interested in learning more about and ask them questions. While I hate to reveal just how long I have been working in this field, let's just say that pads of paper and a stopwatch were key tools for any test I conducted. Over the years, I have worked in simple labs with basic video taping equipment and not much else, and I have worked in corporate environments with sophisticated usability labs and state-of-the-art equipment. Years ago, we conducted all usability studies at the location of the user. If we wanted to see if there were any differences between users in New York, Chicago, and Los Angeles, we went to those places to run the test. A lab environment is very useful for many test situations. However, there has always been a debate in the usability field about whether bringing someone into a lab environment, however friendly we make it, somehow intrinsically changes the behavior of the user as compared to having them work in their own environment, at their own desk, and on their own computer. We developed systems to create a portable usability lab, so that we could go to the users that we needed to test.  Do lab environments change user behavior patterns? Then 9/11 hit. You may not remember, but no planes flew for weeks afterwards. Companies all over the world couldn't fly-in employees for meetings. Suddenly, traveling to the location of the users had an additional difficulty. The company I was working for at the time had usability specialists stuck in New York for days before they could finally rent a car and drive home to Colorado. This changed the world pretty suddenly, and technology jumped on the change. Companies offering Internet meeting tools were strugglinguntil no one could travel. The Internet boomed with collaboration tools that enabled people to work together wherever they happened to be. This change in technology has made a huge difference in my world. We use collaborative tools to bring our product concepts and ideas to the user across the Internet. As a global company, we benefit from having users from all over the world inform our designs. We now run usability studies with users all over the world in a single day, a feat we couldn't have accomplished 10 years ago by plane! Other technology companies have started to do more of this type of usability testing, since the tools have improved so dramatically. Plus, in our busy world, it's not always easy to find users who can take the time away from their jobs to come to our labs. reaching users where it is convenient for them greatly improves the odds that people do participate. I manage a team of usability specialists who live in India and California, whlie I live in Colorado. We have wonderful labs that we bring users into to show them our products. But very often, we run our studies remotely. We used to take the lab to the users now we use the labs, but we let the users stay where they are. We gain users who might not have been able to leave work to come to our labs, and they get to use the system they are familiar with. And we gain users nearly anywhere that we can set up an Internet connection, as long as the users have a phone, a broadband connection, and a compatible Web browser (with no pop-up blockers). After we recruit participants in a traditional manner, we send them an invitation to participate through the use of a telephone conference call and Web conferencing tool. At Oracle, we use Oracle Web Conference part of Oracle Collaboration Suite, which enables us to give the user control of the mouse, while we present a prototype or wireframe pictures. We can record the sessions over the Web and phone conference. We send the users instructions, plus tips to ensure that we won't have problems sharing screens. In some cases, when time is tight, we even run a five-minute "test session" with users a day in advance to be sure that we can connect. Prior to the test, we send users a participant script that contains information about the study, including any questionnaires. This is exactly the same script we give to participants who come to the labs. We ask users to print this before the beginning of the session. We generally run these studies by having a usability engineer in our usability labs, so that we can record the session as though the user were in the lab with us. Roughly 80% of our application software usability testing at Oracle is performed using remote methods. The probability of getting a   remote test participant decreases the higher up the person is in the target organization. We have a methodology checklist available to help our usability engineers work through the remote processes.

  Read the article

• Simple Project Templates

  - by Geertjan

  The NetBeans sources include a module named "simple.project.templates": In the module sources, Tim Boudreau turns out to be the author of the code, so I asked him what it was all about, and if he could provide some usage code. His response, from approximately this time last year because it's been sitting in my inbox for a while, is below. Sure - though I think the javadoc in it is fairly complete.  I wrote it because I needed to create a bunch of project templates for Javacard, and all of the ways that is usually done were grotesque and complicated.  I figured we already have the ability to create files from templates, and we already have the ability to do substitutions in templates, so why not have a single file that defines the project as a list of file templates to create (with substitutions in the names) and some definitions of what should be in project properties. You can also add files to the project programmatically if you want.Basically, a template for an entire project is a .properties file.  Any line which doesn't have the prefix 'pp.' or 'pvp.' is treated as the definition of one file which should be created in the new project.  Any such line where the key ends in * means that file should be opened once the new project is created.  So, for example, in the nodejs module, the definition looks like: {{projectName}}.js*=Templates/javascript/HelloWorld.js .npmignore=node_hidden_templates/npmignore So, the first line means:  - Create a file with the same name as the project, using the HelloWorld template    - I.e. the left side of the line is the relative path of the file to create, and the right side is the path in the system filesystem for the template to use       - If the template is not one you normally want users to see, just register it in the system filesystem somewhere other than Templates/ (but remember to set the attribute that marks it as a template)  - Include that file in the set of files which should be opened in the editor once the new project is created. To actually create a project, first you just create a new ProjectCreator: ProjectCreator gen = new ProjectCreator( parentFolderOfNewProject ); Now, if you want to programmatically generate any files, in addition to those defined in the template, you can: gen.add (new FileCreator("nbproject", "project.xml", false) {     public DataObject create (FileObject project, Map<String,String> substitutions) throws IOException {          ...     } }); Then pass the FileObject for the project template (the properties file) to the ProjectCreator's createProject method (hmm, maybe it should be the string path to the project template instead, to save the caller trouble looking up the FileObject for the template).  That method looks like this: public final GeneratedProject createProject(final ProgressHandle handle, final String name, final FileObject template, final Map<String, String> substitutions) throws IOException { The name parameter should be the directory name for the new project;  the map is the strings you gathered in the wizard which should be used for substitutions.  createProject should be called on a background thread (i.e. use a ProgressInstantiatingIterator for the wizard iterator and just pass in the ProgressHandle you are given). The return value is a GeneratedProject object, which is just a holder for the created project directory and the set of DataObjects which should be opened when the wizard finishes. I'd love to see simple.project.templates moved out of the javacard cluster, as it is really useful and much simpler than any of the stuff currently done for generating projects.  It would also be possible to do much richer tools for creating projects in apisupport - i.e. choose (or create in the wizard) the templates you want to use, generate a skeleton wizard with a UI for all the properties you'd like to substitute, etc. Here is a partial project template from Javacard - for example usage, see org.netbeans.modules.javacard.wizard.ProjectWizardIterator in javacard.project (or the much simpler one in contrib/nodejs). #This properties file describes what to create when a project template is#instantiated.  The keys are paths on disk relative to the project root. #The values are paths to the templates to use for those files in the system#filesystem.  Any string inside {{ and }}'s will be substituted using properties#gathered in the template wizard.#Special key prefixes are #  pp. - indicates an entry for nbproject/project.properties#  pvp. - indicates an entry for nbproject/private/private.properties #File templates, in format [path-in-project=path-to-template]META-INF/javacard.xml=org-netbeans-modules-javacard/templates/javacard.xmlMETA-INF/MANIFEST.MF=org-netbeans-modules-javacard/templates/EAP_MANIFEST.MF APPLET-INF/applet.xml=org-netbeans-modules-javacard/templates/applet.xmlscripts/{{classnamelowercase}}.scr=org-netbeans-modules-javacard/templates/test.scrsrc/{{packagepath}}/{{classname}}.java*=Templates/javacard/ExtendedApplet.java nbproject/deployment.xml=org-netbeans-modules-javacard/templates/deployment.xml#project.properties contentspp.display.name={{projectname}}pp.platform.active={{activeplatform}} pp.active.device={{activedevice}}pp.includes=**pp.excludes= I will be using the above info in an upcoming blog entry and provide step by step instructions showing how to use them. However, anyone else out there should have enough info from the above to get started yourself!

  Read the article

• Unmet Dependencies with kdelibs5-data

  - by Jitesh

  I was trying to install Amarok 1.4 on Ubuntu 12.04 (Gnome-classic), by following this instructions. Problem started after giving these two commands dpkg -i kdelibs5-data_4.6.2-0ubuntu4_all.deb dpkg -i kdelibs-data_3.5.10.dfsg.1-5ubuntu2_all.deb Now, immediately after these commands, Ubuntu Updater popped up and gave me an error that the package catalog is broken and needs to be repaired. Nothing can be installed or removed till then. It also offered a suggestion to run apt-get install -f. I tried that, but again got the same error.Also tried apt-get clean followed by apt-get install -f. Again got the following output: jitesh@jitesh-desktop:~$ sudo apt-get clean jitesh@jitesh-desktop:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: kdelibs5-data The following packages will be upgraded: kdelibs5-data 1 upgraded, 0 newly installed, 0 to remove and 18 not upgraded. 2 not fully installed or removed. Need to get 2,832 kB of archives. After this operation, 2,998 kB disk space will be freed. Do you want to continue [Y/n]? y Get:1 http: //in.archive.ubuntu.com/ubuntu/precise-updates/main kdelibs5-data all 4:4.8.4a-0ubuntu0.2 [2,832 kB] Fetched 2,832 kB in 32s (86.6 kB/s) dpkg: dependency problems prevent configuration of kdelibs5-data: libplasma3 (4:4.8.4a-0ubuntu0.2) breaks kdelibs5-data (<< 4:4.6.80~) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. kate-data (4:4.8.4-0ubuntu0.1) breaks kdelibs5-data (<< 4:4.6.90) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. katepart (4:4.8.4-0ubuntu0.1) breaks kdelibs5-data (<< 4:4.6.90) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. dpkg: error processing kdelibs5-data (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of kdelibs-data: kdelibs-data depends on kdelibs5-data; however: Package kdelibs5-data is not configured yet. No apport report written because MaxReports is reached already dpkg: error processing kdelibs-data (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: kdelibs5-data kdelibs-data W: Duplicate sources.list entry http://archive.canonical.com/ubuntu/ precise/partner i386 Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_precise_partner_binary-i386_Packages) W: You may want to run apt-get update to correct these problems E: Sub-process /usr/bin/dpkg returned an error code (1) As I thought the error was related to configuring kdelibs, I tried to configure using dpkg. But got the following errors: jitesh@jitesh-desktop:~$ sudo dpkg --configure -a dpkg: dependency problems prevent configuration of kdelibs5-data: libplasma3 (4:4.8.4a-0ubuntu0.2) breaks kdelibs5-data (<< 4:4.6.80~) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. kate-data (4:4.8.4-0ubuntu0.1) breaks kdelibs5-data (<< 4:4.6.90) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. katepart (4:4.8.4-0ubuntu0.1) breaks kdelibs5-data (<< 4:4.6.90) and is installed. Version of kdelibs5-data to be configured is 4:4.6.2-0ubuntu4. dpkg: error processing kdelibs5-data (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of kdelibs-data: kdelibs-data depends on kdelibs5-data; however: Package kdelibs5-data is not configured yet. dpkg: error processing kdelibs-data (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: kdelibs5-data kdelibs-data jitesh@jitesh-desktop:~$ Now I dont have any idea how to proceed. I am unable to install anything from Software Centre or using Terminal now. Some basic info: Core2Duo, dual booting Ubuntu 12.04 with Win7. Fresh install of Ubuntu 12.04 (not upgrade). Incidentally, I had first upgraded from 10.04 and had succesfully installed Amarok 1.4 following this same method. But due to other issues, i had to format and do a clean install of 12.04. Now when I tried to install Amarok 1.4, I'm getting these errors. I also have digiKam and k3b installed, if that can be of any help. I use digiKam a lot, so removing KDE is not feasible for me. Any help on this issue will be highly appreciated. Thanks in advance.

  Read the article

• Making your ASP.NET/HTML Websites Indic aware &ndash; accepting Tamil, Telugu, Kannada, Hindi and ot

  - by Harish Ranganathan

  Its been a month since I wrote my last post.  Much of work has been happening around planning for Tech Ed India, the upcoming Virtual TechDays this week as well as our Developer content at the Great Indian Developer Summit 2010.  Its going to be one exciting period starting this week and I am glad I would be able to meet a lot of folks who have written to me personally that they would like to catch up at Tech Ed India. For now, I had a chance to meet the Microsoft India Development Centre team that worked on the Microsoft Indic Language Input Tool (erstwhile Akshara). The team updated me that they have also released the scripts  so that the Indic input feature can be encapsulated into your own websites.  For example, if you are having a web page where you collect user information, you can pretty much make your site indic aware i.e. accept inputs in Tamil, Telugu, Kannada, Hindi etc.,  All you would need to include would be a bunch of scripts onto your web pages and you are ready to make it, like I said, “indic aware” I have built a sample web page that accepts First Name, Last Name, Address and an additional field.  When it comes to accepting indic, sometimes, you may want to avoid the indic input in certain fields and accept it in English.  You can specify the MicrosoftILITWebAttach="false" attribute to the Text Boxes and Text Areas (TextMode=”Multiline” in ASP.NET) so that the particular field automatically switches over to English input.  Similarly, the moment you specify that the TextMode=”Password” to make it as a password field, it automatically ignores all indic recognition and shows the masked dots for the words entered. Note that, this is, when we are going for the Opt-out mode, where we are specifying that by default all the input controls would need indic awareness and we would specify for those controls where it is not required.  The other mode is Opt-in mode where you would need to add a different property to the script definition i.e. attachMode=”optin” .  When we do this, we need to explicitly add the MicrosoftILITWebAttach="true" attribute for every control where we need indic input. I have created a sample web page which accepts First Name, Last Name, Address and an additional input field to demonstrate the “Opt-out”.   You can copy paste this into any of your web pages to check it <form id="form1" runat="server">     <!-- Microsoft Indic Language Input Tool embed code --> <input type="hidden" id="MicrosoftILITWebEmbedInfo" attachMode="optout" value="" /> <script type="text/javascript" src="http://ilit.microsoft.com/bookmarklet/script/Tamil.js" defer="defer"></script>     <div>     <h2>         Welcome to the Registration Page     </h2>     <p>         First Name: <asp:TextBox runat="server" ID="txtFirstName" />         <br />         <br />         Last Name: <asp:TextBox runat="server" ID="txtLastName" />         <br />         <br />         Password:         <asp:TextBox runat="server" ID="txtPassword" TextMode="Password" />         <br />         <br />         Address: <asp:TextBox runat="server" ID="txtAddress" TextMode="MultiLine" Height="100" Width="200" />         <br />         <br />         English Text: <asp:TextBox ID="txtEnglishText" runat="server" MicrosoftILITWebAttach="false" />     </p>     <p>         <!-- Microsoft Indic Language Input Tool attribution image link --> <a style="text-decoration: none" href="http://go.microsoft.com/fwlink/?LinkID=184205&clcid=0x409"><img style="border: 0px" alt="Transliteration by Microsoft" src="http://ilit.microsoft.com/bookmarklet/images/attribution.png"></a>     </p>     </div>     </form> If you note the code snippet above, I have included the scripts in the top with the attachMode set to “optout” and for the last TextBox, I have mentioned the MicrosoftILITWebAttach="false” attribute to make it accept English input.   Additionally, you also need to add the “Microsoft Indic Language Input Tool attribution image” to your web page as a courtesy to the team that developed this feature.  It would basically add a image saying “Transliteration by Microsoft” similar to a Copy Right image.  You can see the screen shot below where I have typed it in Tamil.  In that you will notice that the password field behaves as expected and the last field accepts English Text.  You can also notice the icon that comes in the first textbox that indicates that, the field is going to accept indic text.   This sample is using Tamil, but you can pretty much do it for Hindi, Telugu, Kannada, Marathi, Bengali etc.,   The website for getting the Indic script and other instructions is http://specials.msn.co.in/ilit/WebEmbed.aspx?language=Tamil You can replace the querystring value “Tamil” to other languages as mentioned above to get the respective script. This also works for plain HTML based websites and doesn’t necessarily need you to use ASP.NET to achieve the functionality. Note that, this form is not completely localized.  This is transliterated.  You can add label controls for FirstName, LastName indication etc., and use the Visual Studio tools to localize and get those values from resource files.  In the resource files, you can enter the text in different languages to make this a truly localized page.  If you just want to download the Indic Tool Desktop version (that can be used for typing in Word, Excel, pretty much any input area), you can download it from http://specials.msn.co.in/ilit/  In the same page, there is also a web version where you can type and get text then and there if you dont want to install the desktop version. So, go ahead, download / use them in your websites and enjoy the power of Indic. Cheers !!!

  Read the article

• JNI 'problmatic frame' causes JVM to crash

  - by HJED

  Hi I'm using JNI to access the exiv2 library (written in C++) in Java and I'm getting a weird runtime error in the JNI code. I've tried using various -Xms and -Xmx options, but that seems to have no affect. I've also tried running this code on JDK1.7.0 with the same result. # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x00007ff31807757f, pid=4041, tid=140682078746368 # # JRE version: 6.0_20-b20 # Java VM: OpenJDK 64-Bit Server VM (19.0-b09 mixed mode linux-amd64 ) # Derivative: IcedTea6 1.9.2 # Distribution: Ubuntu 10.10, package 6b20-1.9.2-0ubuntu2 # Problematic frame: # V [libjvm.so+0x42757f] # # If you would like to submit a bug report, please include # instructions how to reproduce the bug and visit: # https://bugs.launchpad.net/ubuntu/+source/openjdk-6/ # --------------- T H R E A D --------------- Current thread (0x000000000190d000): JavaThread "main" [_thread_in_Java, id=4043, stack(0x00007ff319447000,0x00007ff319548000)] siginfo:si_signo=SIGSEGV: si_errno=0, si_code=1 (SEGV_MAPERR), si_addr=0x0000000000000024 Registers: ... Register to memory mapping: RAX=0x0000000000000002 0x0000000000000002 is pointing to unknown location RBX=0x000000000190db90 0x000000000190db90 is pointing to unknown location RCX=0x0000000000000000 0x0000000000000000 is pointing to unknown location RDX=0x00007ff3195463f8 0x00007ff3195463f8 is pointing into the stack for thread: 0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE RSP=0x00007ff319546270 0x00007ff319546270 is pointing into the stack for thread: 0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE RBP=0x00007ff319546270 0x00007ff319546270 is pointing into the stack for thread: 0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE RSI=0x0000000000000024 0x0000000000000024 is pointing to unknown location RDI=0x00007ff3195463e0 0x00007ff3195463e0 is pointing into the stack for thread: 0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE R8 =0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE R9 =0x000000000190db88 0x000000000190db88 is pointing to unknown location R10=0x00007ff319546300 0x00007ff319546300 is pointing into the stack for thread: 0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE R11=0x0000000000000002 0x0000000000000002 is pointing to unknown location R12=0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE R13=0x00007ff319546560 0x00007ff319546560 is pointing into the stack for thread: 0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE R14=0x00007ff3195463e0 0x00007ff3195463e0 is pointing into the stack for thread: 0x000000000190d000 "main" prio=10 tid=0x000000000190d000 nid=0xfcb runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE R15=0x0000000000000003 0x0000000000000003 is pointing to unknown location Top of Stack: (sp=0x00007ff319546270) ... Instructions: (pc=0x00007ff31807757f) 0x00007ff31807756f: e2 03 48 03 57 58 31 c9 48 8b 32 48 85 f6 74 03 0x00007ff31807757f: 48 8b 0e 48 89 0a 8b 77 68 83 c0 01 39 f0 7c d1 Stack: [0x00007ff319447000,0x00007ff319548000], sp=0x00007ff319546270, free space=1020k Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) V [libjvm.so+0x42757f] V [libjvm.so+0x42866b] V [libjvm.so+0x4275c8] V [libjvm.so+0x4331bd] V [libjvm.so+0x44e5c7] C [libExiff2-binding.so+0x1f16] _ZN7JNIEnv_15CallVoidMethodAEP8_jobjectP10_jmethodIDPK6jvalue+0x40 C [libExiff2-binding.so+0x1b96] _Z8loadIPTCSt8auto_ptrIN5Exiv25ImageEEPKcP7JNIEnv_P8_jobject+0x2ba C [libExiff2-binding.so+0x1d3f] _Z7getVarsPKcP7JNIEnv_P8_jobject+0x176 C [libExiff2-binding.so+0x1de7] Java_photo_exiv2_Exiv2MetaDataStore_impl_1loadFromExiv+0x4b j photo.exiv2.Exiv2MetaDataStore.impl_loadFromExiv(Ljava/lang/String;Lphoto/exiv2/Exiv2MetaDataStore;)V+0 j photo.exiv2.Exiv2MetaDataStore.loadFromExiv2()V+9 j photo.exiv2.Exiv2MetaDataStore.loadData()V+1 j photo.exiv2.Exiv2MetaDataStore.<init>(Lphoto/ImageFile;)V+10 j test.Main.main([Ljava/lang/String;)V+76 v ~StubRoutines::call_stub V [libjvm.so+0x428698] V [libjvm.so+0x4275c8] V [libjvm.so+0x432943] V [libjvm.so+0x447f91] C [java+0x3495] JavaMain+0xd75 --------------- P R O C E S S --------------- Java Threads: ( => current thread ) 0x00007ff2c4027800 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=4060, stack(0x00007ff2c9052000,0x00007ff2c9153000)] 0x00007ff2c4025000 JavaThread "CompilerThread1" daemon [_thread_blocked, id=4059, stack(0x00007ff2c9153000,0x00007ff2c9254000)] 0x00007ff2c4022000 JavaThread "CompilerThread0" daemon [_thread_blocked, id=4058, stack(0x00007ff2c9254000,0x00007ff2c9355000)] 0x00007ff2c401f800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=4057, stack(0x00007ff2c9355000,0x00007ff2c9456000)] 0x00007ff2c4001000 JavaThread "Finalizer" daemon [_thread_blocked, id=4056, stack(0x00007ff2c994d000,0x00007ff2c9a4e000)] 0x0000000001984000 JavaThread "Reference Handler" daemon [_thread_blocked, id=4055, stack(0x00007ff2c9a4e000,0x00007ff2c9b4f000)] =>0x000000000190d000 JavaThread "main" [_thread_in_Java, id=4043, stack(0x00007ff319447000,0x00007ff319548000)] Other Threads: 0x000000000197d800 VMThread [stack: 0x00007ff2c9b4f000,0x00007ff2c9c50000] [id=4054] 0x00007ff2c4032000 WatcherThread [stack: 0x00007ff2c8f51000,0x00007ff2c9052000] [id=4061] VM state:not at safepoint (normal execution) VM Mutex/Monitor currently owned by a thread: None Heap PSYoungGen total 18432K, used 316K [0x00007ff2fed30000, 0x00007ff3001c0000, 0x00007ff313730000) eden space 15808K, 2% used [0x00007ff2fed30000,0x00007ff2fed7f0b8,0x00007ff2ffca0000) from space 2624K, 0% used [0x00007ff2fff30000,0x00007ff2fff30000,0x00007ff3001c0000) to space 2624K, 0% used [0x00007ff2ffca0000,0x00007ff2ffca0000,0x00007ff2fff30000) PSOldGen total 42240K, used 0K [0x00007ff2d5930000, 0x00007ff2d8270000, 0x00007ff2fed30000) object space 42240K, 0% used [0x00007ff2d5930000,0x00007ff2d5930000,0x00007ff2d8270000) PSPermGen total 21248K, used 2827K [0x00007ff2cb330000, 0x00007ff2cc7f0000, 0x00007ff2d5930000) object space 21248K, 13% used [0x00007ff2cb330000,0x00007ff2cb5f2f60,0x00007ff2cc7f0000) Dynamic libraries: 00400000-00409000 r-xp 00000000 08:03 141899 /usr/lib/jvm/java-6-openjdk/jre/bin/java 00608000-00609000 r--p 00008000 08:03 141899 /usr/lib/jvm/java-6-openjdk/jre/bin/java 00609000-0060a000 rw-p 00009000 08:03 141899 /usr/lib/jvm/java-6-openjdk/jre/bin/java 01904000-019ad000 rw-p 00000000 00:00 0 [heap] ... 7ff2c820c000-7ff2c8232000 r-xp 00000000 08:03 917704 /lib/libexpat.so.1.5.2 7ff2c8232000-7ff2c8432000 ---p 00026000 08:03 917704 /lib/libexpat.so.1.5.2 7ff2c8432000-7ff2c8434000 r--p 00026000 08:03 917704 /lib/libexpat.so.1.5.2 7ff2c8434000-7ff2c8435000 rw-p 00028000 08:03 917704 /lib/libexpat.so.1.5.2 7ff2c8435000-7ff2c844a000 r-xp 00000000 08:03 917708 /lib/libgcc_s.so.1 7ff2c844a000-7ff2c8649000 ---p 00015000 08:03 917708 /lib/libgcc_s.so.1 7ff2c8649000-7ff2c864a000 r--p 00014000 08:03 917708 /lib/libgcc_s.so.1 7ff2c864a000-7ff2c864b000 rw-p 00015000 08:03 917708 /lib/libgcc_s.so.1 7ff2c864b000-7ff2c8733000 r-xp 00000000 08:03 134995 /usr/lib/libstdc++.so.6.0.14 7ff2c8733000-7ff2c8932000 ---p 000e8000 08:03 134995 /usr/lib/libstdc++.so.6.0.14 7ff2c8932000-7ff2c893a000 r--p 000e7000 08:03 134995 /usr/lib/libstdc++.so.6.0.14 7ff2c893a000-7ff2c893c000 rw-p 000ef000 08:03 134995 /usr/lib/libstdc++.so.6.0.14 7ff2c893c000-7ff2c8951000 rw-p 00000000 00:00 0 7ff2c8951000-7ff2c8af3000 r-xp 00000000 08:03 134599 /usr/lib/libexiv2.so.6.0.0 7ff2c8af3000-7ff2c8cf2000 ---p 001a2000 08:03 134599 /usr/lib/libexiv2.so.6.0.0 7ff2c8cf2000-7ff2c8d0f000 r--p 001a1000 08:03 134599 /usr/lib/libexiv2.so.6.0.0 7ff2c8d0f000-7ff2c8d10000 rw-p 001be000 08:03 134599 /usr/lib/libexiv2.so.6.0.0 7ff2c8d10000-7ff2c8d23000 rw-p 00000000 00:00 0 7ff2c8d42000-7ff2c8d45000 r-xp 00000000 08:03 800718 /home/hjed/libExiff2-binding.so 7ff2c8d45000-7ff2c8f44000 ---p 00003000 08:03 800718 /home/hjed/libExiff2-binding.so 7ff2c8f44000-7ff2c8f45000 r--p 00002000 08:03 800718 /home/hjed/libExiff2-binding.so 7ff2c8f45000-7ff2c8f46000 rw-p 00003000 08:03 800718 /home/hjed/libExiff2-binding.so 7ff2c8f46000-7ff2c8f49000 r--s 0000f000 08:03 141333 /usr/lib/jvm/java-6-openjdk/jre/lib/ext/pulse-java.jar 7ff2c8f49000-7ff2c8f51000 r--s 00066000 08:03 408472 /usr/share/java/gnome-java-bridge.jar ... 7ff2ca559000-7ff2ca55b000 r--s 0001d000 08:03 141354 /usr/lib/jvm/java-6-openjdk/jre/lib/plugin.jar 7ff2ca55b000-7ff2ca560000 r--s 00044000 08:03 141353 /usr/lib/jvm/java-6-openjdk/jre/lib/netx.jar 7ff2ca560000-7ff2ca592000 rw-p 00000000 00:00 0 7ff2ca592000-7ff2ca720000 r--s 038af000 08:03 141833 /usr/lib/jvm/java-6-openjdk/jre/lib/rt.jar ... 7ff31673b000-7ff316742000 r-xp 00000000 08:03 141867 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libzip.so 7ff316742000-7ff316941000 ---p 00007000 08:03 141867 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libzip.so 7ff316941000-7ff316942000 r--p 00006000 08:03 141867 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libzip.so 7ff316942000-7ff316943000 rw-p 00007000 08:03 141867 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libzip.so 7ff316943000-7ff31694f000 r-xp 00000000 08:03 921396 /lib/libnss_files-2.12.1.so 7ff31694f000-7ff316b4e000 ---p 0000c000 08:03 921396 /lib/libnss_files-2.12.1.so 7ff316b4e000-7ff316b4f000 r--p 0000b000 08:03 921396 /lib/libnss_files-2.12.1.so 7ff316b4f000-7ff316b50000 rw-p 0000c000 08:03 921396 /lib/libnss_files-2.12.1.so 7ff316b50000-7ff316b5a000 r-xp 00000000 08:03 921398 /lib/libnss_nis-2.12.1.so 7ff316b5a000-7ff316d59000 ---p 0000a000 08:03 921398 /lib/libnss_nis-2.12.1.so 7ff316d59000-7ff316d5a000 r--p 00009000 08:03 921398 /lib/libnss_nis-2.12.1.so 7ff316d5a000-7ff316d5b000 rw-p 0000a000 08:03 921398 /lib/libnss_nis-2.12.1.so 7ff316d5b000-7ff316d63000 r-xp 00000000 08:03 921393 /lib/libnss_compat-2.12.1.so 7ff316d63000-7ff316f62000 ---p 00008000 08:03 921393 /lib/libnss_compat-2.12.1.so 7ff316f62000-7ff316f63000 r--p 00007000 08:03 921393 /lib/libnss_compat-2.12.1.so 7ff316f63000-7ff316f64000 rw-p 00008000 08:03 921393 /lib/libnss_compat-2.12.1.so 7ff316f64000-7ff316f6c000 r-xp 00000000 08:03 141869 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/native_threads/libhpi.so 7ff316f6c000-7ff31716b000 ---p 00008000 08:03 141869 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/native_threads/libhpi.so 7ff31716b000-7ff31716c000 r--p 00007000 08:03 141869 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/native_threads/libhpi.so 7ff31716c000-7ff31716d000 rw-p 00008000 08:03 141869 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/native_threads/libhpi.so 7ff31716d000-7ff317184000 r-xp 00000000 08:03 921392 /lib/libnsl-2.12.1.so 7ff317184000-7ff317383000 ---p 00017000 08:03 921392 /lib/libnsl-2.12.1.so 7ff317383000-7ff317384000 r--p 00016000 08:03 921392 /lib/libnsl-2.12.1.so 7ff317384000-7ff317385000 rw-p 00017000 08:03 921392 /lib/libnsl-2.12.1.so 7ff317385000-7ff317387000 rw-p 00000000 00:00 0 7ff317387000-7ff3173b2000 r-xp 00000000 08:03 141850 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libjava.so 7ff3173b2000-7ff3175b1000 ---p 0002b000 08:03 141850 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libjava.so 7ff3175b1000-7ff3175b2000 r--p 0002a000 08:03 141850 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libjava.so 7ff3175b2000-7ff3175b5000 rw-p 0002b000 08:03 141850 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libjava.so 7ff3175b5000-7ff3175c3000 r-xp 00000000 08:03 141866 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libverify.so 7ff3175c3000-7ff3177c2000 ---p 0000e000 08:03 141866 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libverify.so 7ff3177c2000-7ff3177c4000 r--p 0000d000 08:03 141866 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libverify.so 7ff3177c4000-7ff3177c5000 rw-p 0000f000 08:03 141866 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/libverify.so 7ff3177c5000-7ff3177cc000 r-xp 00000000 08:03 921405 /lib/librt-2.12.1.so 7ff3177cc000-7ff3179cb000 ---p 00007000 08:03 921405 /lib/librt-2.12.1.so 7ff3179cb000-7ff3179cc000 r--p 00006000 08:03 921405 /lib/librt-2.12.1.so 7ff3179cc000-7ff3179cd000 rw-p 00007000 08:03 921405 /lib/librt-2.12.1.so 7ff3179cd000-7ff317a4f000 r-xp 00000000 08:03 921390 /lib/libm-2.12.1.so 7ff317a4f000-7ff317c4e000 ---p 00082000 08:03 921390 /lib/libm-2.12.1.so 7ff317c4e000-7ff317c4f000 r--p 00081000 08:03 921390 /lib/libm-2.12.1.so 7ff317c4f000-7ff317c50000 rw-p 00082000 08:03 921390 /lib/libm-2.12.1.so 7ff317c50000-7ff3184c4000 r-xp 00000000 08:03 141871 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/server/libjvm.so 7ff3184c4000-7ff3186c3000 ---p 00874000 08:03 141871 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/server/libjvm.so 7ff3186c3000-7ff318739000 r--p 00873000 08:03 141871 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/server/libjvm.so 7ff318739000-7ff318754000 rw-p 008e9000 08:03 141871 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/server/libjvm.so 7ff318754000-7ff31878d000 rw-p 00000000 00:00 0 7ff31878d000-7ff318907000 r-xp 00000000 08:03 921385 /lib/libc-2.12.1.so 7ff318907000-7ff318b06000 ---p 0017a000 08:03 921385 /lib/libc-2.12.1.so 7ff318b06000-7ff318b0a000 r--p 00179000 08:03 921385 /lib/libc-2.12.1.so 7ff318b0a000-7ff318b0b000 rw-p 0017d000 08:03 921385 /lib/libc-2.12.1.so 7ff318b0b000-7ff318b10000 rw-p 00000000 00:00 0 7ff318b10000-7ff318b12000 r-xp 00000000 08:03 921388 /lib/libdl-2.12.1.so 7ff318b12000-7ff318d12000 ---p 00002000 08:03 921388 /lib/libdl-2.12.1.so 7ff318d12000-7ff318d13000 r--p 00002000 08:03 921388 /lib/libdl-2.12.1.so 7ff318d13000-7ff318d14000 rw-p 00003000 08:03 921388 /lib/libdl-2.12.1.so 7ff318d14000-7ff318d18000 r-xp 00000000 08:03 141838 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/jli/libjli.so 7ff318d18000-7ff318f17000 ---p 00004000 08:03 141838 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/jli/libjli.so 7ff318f17000-7ff318f18000 r--p 00003000 08:03 141838 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/jli/libjli.so 7ff318f18000-7ff318f19000 rw-p 00004000 08:03 141838 /usr/lib/jvm/java-6-openjdk/jre/lib/amd64/jli/libjli.so 7ff318f19000-7ff318f31000 r-xp 00000000 08:03 921401 /lib/libpthread-2.12.1.so 7ff318f31000-7ff319130000 ---p 00018000 08:03 921401 /lib/libpthread-2.12.1.so 7ff319130000-7ff319131000 r--p 00017000 08:03 921401 /lib/libpthread-2.12.1.so 7ff319131000-7ff319132000 rw-p 00018000 08:03 921401 /lib/libpthread-2.12.1.so 7ff319132000-7ff319136000 rw-p 00000000 00:00 0 7ff319136000-7ff31914c000 r-xp 00000000 08:03 917772 /lib/libz.so.1.2.3.4 7ff31914c000-7ff31934c000 ---p 00016000 08:03 917772 /lib/libz.so.1.2.3.4 7ff31934c000-7ff31934d000 r--p 00016000 08:03 917772 /lib/libz.so.1.2.3.4 7ff31934d000-7ff31934e000 rw-p 00017000 08:03 917772 /lib/libz.so.1.2.3.4 7ff31934e000-7ff31936e000 r-xp 00000000 08:03 921379 /lib/ld-2.12.1.so 7ff319387000-7ff319391000 rw-p 00000000 00:00 0 7ff319391000-7ff319447000 rw-p 00000000 00:00 0 7ff319447000-7ff31944a000 ---p 00000000 00:00 0 7ff31944a000-7ff31954d000 rw-p 00000000 00:00 0 7ff319562000-7ff31956a000 rw-s 00000000 08:03 1966453 /tmp/hsperfdata_hjed/4041 7ff31956a000-7ff31956b000 rw-p 00000000 00:00 0 7ff31956b000-7ff31956c000 r--p 00000000 00:00 0 7ff31956c000-7ff31956e000 rw-p 00000000 00:00 0 7ff31956e000-7ff31956f000 r--p 00020000 08:03 921379 /lib/ld-2.12.1.so 7ff31956f000-7ff319570000 rw-p 00021000 08:03 921379 /lib/ld-2.12.1.so 7ff319570000-7ff319571000 rw-p 00000000 00:00 0 7fff0fb03000-7fff0fb24000 rw-p 00000000 00:00 0 [stack] 7fff0fbff000-7fff0fc00000 r-xp 00000000 00:00 0 [vdso] ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] VM Arguments: jvm_args: -Dfile.encoding=UTF-8 java_command: test.Main Launcher Type: SUN_STANDARD Environment Variables: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games USERNAME=hjed LD_LIBRARY_PATH=/usr/lib/jvm/java-6-openjdk/jre/lib/amd64/server:/usr/lib/jvm/java-6-openjdk/jre/lib/amd64:/usr/lib/jvm/java-6-openjdk/jre/../lib/amd64 SHELL=/bin/bash DISPLAY=:0.0 Signal Handlers: SIGSEGV: [libjvm.so+0x712700], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGBUS: [libjvm.so+0x712700], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGFPE: [libjvm.so+0x5d4020], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGPIPE: [libjvm.so+0x5d4020], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGXFSZ: [libjvm.so+0x5d4020], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGILL: [libjvm.so+0x5d4020], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGUSR1: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000 SIGUSR2: [libjvm.so+0x5d3730], sa_mask[0]=0x00000004, sa_flags=0x10000004 SIGHUP: [libjvm.so+0x5d61a0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGINT: SIG_IGN, sa_mask[0]=0x00000000, sa_flags=0x00000000 SIGTERM: [libjvm.so+0x5d61a0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 SIGQUIT: [libjvm.so+0x5d61a0], sa_mask[0]=0x7ffbfeff, sa_flags=0x10000004 --------------- S Y S T E M --------------- OS:Ubuntu 10.10 (maverick) uname:Linux 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 02:41:37 UTC 2010 x86_64 libc:glibc 2.12.1 NPTL 2.12.1 rlimit: STACK 8192k, CORE 0k, NPROC infinity, NOFILE 1024, AS infinity load average:0.25 0.16 0.21 /proc/meminfo: MemTotal: 4048200 kB MemFree: 1230476 kB Buffers: 589572 kB Cached: 911132 kB SwapCached: 0 kB Active: 1321712 kB Inactive: 1202272 kB Active(anon): 1023852 kB Inactive(anon): 7168 kB Active(file): 297860 kB Inactive(file): 1195104 kB Unevictable: 64 kB Mlocked: 64 kB SwapTotal: 7065596 kB SwapFree: 7065596 kB Dirty: 632 kB Writeback: 0 kB AnonPages: 1023368 kB Mapped: 145832 kB Shmem: 7728 kB Slab: 111136 kB SReclaimable: 66316 kB SUnreclaim: 44820 kB KernelStack: 3824 kB PageTables: 27736 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 9089696 kB Committed_AS: 2378396 kB VmallocTotal: 34359738367 kB VmallocUsed: 332928 kB VmallocChunk: 34359397884 kB HardwareCorrupted: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 67136 kB DirectMap2M: 4118528 kB CPU:total 8 (4 cores per cpu, 2 threads per core) family 6 model 26 stepping 5, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3, sse4.1, sse4.2, popcnt, ht Memory: 4k page, physical 4048200k(1230476k free), swap 7065596k(7065596k free) vm_info: OpenJDK 64-Bit Server VM (19.0-b09) for linux-amd64 JRE (1.6.0_20-b20), built on Dec 10 2010 19:45:55 by "buildd" with gcc 4.4.5 time: Sat Jan 1 14:12:27 2011 elapsed time: 0 seconds The java code is: ... public class Main { public static void main(String[] args) { ... ImageFile img = new ImageFile(System.getProperty("user.home") + "/PC100001.JPG"); Exiv2MetaDataStore e = new Exiv2MetaDataStore(img); Iterator<Entry<String, String>> i = e.entrySet().iterator(); while (i.hasNext()) { Entry<String, String> entry = i.next(); System.out.println(entry.getKey() + ":" + entry.getValue()); } //if you switch this print statment with the while loop you get the same error. // System.out.print(e.toString()); } } and /** NB: MetaDataStore is an abstract class that extends HashMap<String,String> */ public class Exiv2MetaDataStore extends MetaDataStore{ ... private final ImageFile F; /** * Creates an meta data store from an ImageFile using Exiv2 * this calls loadData(); * @param f */ public Exiv2MetaDataStore(ImageFile f) { F = f; loadData(); } ... @Override protected void loadData() { loadFromExiv2(); } ... private void loadFromExiv2() { impl_loadFromExiv(F.getAbsolutePath(), this); } private native void impl_loadFromExiv(String path, Exiv2MetaDataStore str); //this method called by the C++ code public void exiv2_reciveElement(String key, String value) { super.put(key,value); } static { Runtime.getRuntime().load("/home/hjed/libExiff2-binding.so"); } } C++ code: #include <exif.hpp> #include <image.hpp> #include <iptc.hpp> #include <exiv2/exiv2.hpp> #include <exiv2/error.hpp> #include <iostream> #include <iomanip> #include <cassert> void loadIPTC(Exiv2::Image::AutoPtr image, const char * path, JNIEnv * env, jobject obj) { Exiv2::IptcData &iptcData = image->iptcData(); //load method jclass cls = env->GetObjectClass(obj); jmethodID mid = env->GetMethodID(cls, "exiv2_reciveElement", "(Ljava/lang/String;Ljava/lang/String;)V"); //is there any IPTC data AND check that method exists if (iptcData.empty() | (mid == NULL)) { std::string error(path); error += ": failed loading IPTC data, there may not be any data"; } else { Exiv2::IptcData::iterator end = iptcData.end(); for (Exiv2::IptcData::iterator md = iptcData.begin(); md != end; ++md) { jvalue values[2]; const char* key = md->key().c_str(); values[0].l = env->NewStringUTF(key); md->value().toString().c_str(); const char* value = md->typeName(); values[2].l = env->NewStringUTF(value); //If I replace the code for values[2] with the commented out code I get the same error. //const char* type = md->typeName(); //values[2].l = env->NewStringUTF(type); env->CallVoidMethodA(obj, mid, values); } } } void getVars(const char* path, JNIEnv * env, jobject obj) { //Load image Exiv2::Image::AutoPtr image = Exiv2::ImageFactory::open(path); assert(image.get() != 0); image->readMetadata(); //Load IPTC data loadIPTC(image, path, env, obj); } JNIEXPORT void JNICALL Java_photo_exiv2_Exiv2MetaDataStore_impl_1loadFromExiv(JNIEnv * env, jobject obj, jstring path, jobject obj2) { const char* path2 = env->GetStringUTFChars(path, NULL); getVars(path2, env, obj); env->ReleaseStringUTFChars(path, path2); } I've searched for a fix for this, but I can't find one. I don't have much experience using C++ so if I've made an obvious mistake in the C code I apologies. Thanks for any help, HJED P.S. This is my first post on this site and I wasn't sure how much of the code I needed to show. Sorry if I've put to much up.

  Read the article

• How do I turn on wireless adapter on HP Envy dv6 7200 under Ubuntu (any version)?

  - by Dave B.

  I have a new HP Envy dv6 7200 with dual boot Windows 8 / Ubuntu 12.04. In windows, the F12 key in Windows activates the "airplane mode" switch which enables/disables both on-board (mini PCIe) and USB wireless adapters. In Ubuntu, however, the wireless adapter is turned off by default and cannot be turned back on via the F12 key (or any other combination of F12 and Ctrl, Fn, Shift, etc.). Let me explain the "fixes" I've seen in various forums and explain what did or did not happen. These are listed in no particular order. (Spoiler alert: wireless is still broke). Solution 1? Use HP's "Wireless Assistant" utility to permanently activate the wireless card in Windows, then boot into Ubuntu to happily find it working. Unfortunately, this utility works in Windows 7 but not Windows 8. On the other hand, hardware drivers from HP are only available for Windows 8 for this model. Catch 22 (I could not find a comparable utility for Windows 8). Solution 2? Use a USB wireless adapter to sidestep the on-board device. I purchased such a device from thinkpenguin.com to be sure that it would be Linux-friendly. However, the wireless switch enables / disables all wireless devices including USB. So, there's my $50 donation to the nice folks at thinkpenguin.com, but still no solution. Solution 3? Following the Think Penguin folk's suggestion, modify the mini PCI express adapter following instructions here: http://www.notebookforums.com/t/225429/broken-wireless-hardware-switch-fix Tempting, but I then violate the terms of my warranty mere days after opening the box. This might be a good solution for an older machine that you want to get your geek on with, but not for a new box. Solution 4? rfkill unblock all No effect whatsoever. ubuntu@ubuntu-hp-evny:~$ rfkill unblock all ubuntu@ubuntu-hp-evny:~$ rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Solution 5? Re-install drivers. Done and done. Ubuntu recognizes the device - perhaps even without re-installing the drivers? - but cannot turn it on. How do I know this? In the Network Manager drop-down menu, the wireless option is blacked out and a message reads something like: "wireless network is disabled by a hardware switch". Solution 6? Identify a physical switch on the laptop and flip it. There is no such switch on this machine. In fact, walking through Best Buy yesterday, I checked and not a single new laptop PC had a physical switch on it. All of the wireless switches are either the F2 or F12 key ... I wonder if askubuntu will not be plagued by this exact issue in the near future? Additional info - lspci ubuntu@ubuntu-hp-evny:~$ lspci 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) 08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5229 (rev 01) 0a:00.0 Network controller: Ralink corp. Device 539b 0b:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) Any suggestions would be much appreciated!

  Read the article

• How to remap Fn key combinations (Lenovo G500)

  - by Anatoli

  I am running Kubuntu 13.10 on a Lenovo G500 laptop. My question is similar to this one: How can I remap my F keys on my HP laptop? That is to say, my F1-F12 keys are mapped to certain special functions, and only holding down the Fn key restores access to the standard F1-F12 keys. How do I remap certain keys? I would like to know if there is a way to remap Fx to Fn+Fx and vice-versa. As per the instructions of #87043 I checked my BIOS and there is no option to switch the Fx/Fn key functionality. Googling through Leonovo's support forums indicates a BIOS update enabling this is in the works, but there's no indication of when it will be complete. Using xev I was able to see what X sees when F1-F12 are pressed. Some send separate keycodes, but some are somehow mapped to key combinations or other unknown things: F1 - XF86AudioMute F2 - XF86AudioVolumeLower F3 - XF86AudioVolumeRaise F4 - Alt_L + F4 F5 - F5 F6 - Disables touchapd, cannot quite understand what xev tells me is happening, reenables if disabled (Kernel log reveals these have well-defined scancodes not assigned to any keycodes) F7 - XF86WLAN F8 - Alt_L + Ctrl_L + Tab F9 - Turns off LCD backlight, xev sees nothing F10 - Super_L + p F11 - XF86MonBrightnessLower F12 - XF86MonBrightnessRaise Following the instrusctions on this page: How do I remap certain keys? I remapped all the keys that have definite keycodes (F1, F2, F3, F5, F7, F11, F12) This still leaves the F4, F6, F8, F9, F10 keys not functioning properly. This is especially frustarting since F4, F6, F9 now kill the current window, the touchpad and screen, respectively. Any help on remapping these keys to their proper functions would be much appreciated! -Anatoli xev output for these 5 keys: F4 KeyPress event, serial 40, synthetic NO, window 0x4800001, root 0x9d, subw 0x0, time 3674037, (228,298), root:(911,321), state 0x0, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False FocusOut event, serial 40, synthetic NO, window 0x4800001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 40, synthetic NO, window 0x4800001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 40, synthetic NO, window 0x0, keys: 4294967197 0 0 0 0 0 0 0 65 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 KeyRelease event, serial 40, synthetic NO, window 0x4800001, root 0x9d, subw 0x0, time 3674040, (228,298), root:(911,321), state 0x8, keycode 70 (keysym 0xffc1, F4), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4800001, root 0x9d, subw 0x0, time 3674042, (228,298), root:(911,321), state 0x8, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False ClientMessage event, serial 40, synthetic YES, window 0x4800001, message_type 0x12a (WM_PROTOCOLS), format 32, message 0x12b (WM_DELETE_WINDOW) F6 disabling touchpad MappingNotify event, serial 40, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 FocusOut event, serial 40, synthetic NO, window 0x4600001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 40, synthetic NO, window 0x4600001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 40, synthetic NO, window 0x0, keys: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MappingNotify event, serial 41, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 F6 enabling touchpad MappingNotify event, serial 42, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 FocusOut event, serial 42, synthetic NO, window 0x4600001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 42, synthetic NO, window 0x4600001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 42, synthetic NO, window 0x0, keys: 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MappingNotify event, serial 43, synthetic NO, window 0x0, request MappingPointer, first_keycode 0, count 0 F8 doing whatever it is F8 does KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508985, (13,-12), root:(696,11), state 0x0, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508986, (13,-12), root:(696,11), state 0x8, keycode 37 (keysym 0xffe3, Control_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508988, (13,-12), root:(696,11), state 0xc, keycode 23 (keysym 0xff09, Tab), same_screen YES, XLookupString gives 1 bytes: (09) " " XmbLookupString gives 1 bytes: (09) " " XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508989, (13,-12), root:(696,11), state 0xc, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508991, (13,-12), root:(696,11), state 0x4, keycode 37 (keysym 0xffe3, Control_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3508994, (13,-12), root:(696,11), state 0x0, keycode 23 (keysym 0xff09, Tab), same_screen YES, XLookupString gives 1 bytes: (09) " " XFilterEvent returns: False F9 gives no output to xev F10 doing whatever it is F10 does KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586076, (9,-14), root:(692,9), state 0x0, keycode 10 (keysym 0x31, 1), same_screen YES, XLookupString gives 1 bytes: (31) "1" XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586552, (9,-14), root:(692,9), state 0x0, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586554, (9,-14), root:(692,9), state 0x40, keycode 33 (keysym 0x70, p), same_screen YES, XLookupString gives 1 bytes: (70) "p" XmbLookupString gives 1 bytes: (70) "p" XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586557, (9,-14), root:(692,9), state 0x40, keycode 33 (keysym 0x70, p), same_screen YES, XLookupString gives 1 bytes: (70) "p" XFilterEvent returns: False KeyRelease event, serial 40, synthetic NO, window 0x4600001, root 0x9d, subw 0x0, time 3586560, (9,-14), root:(692,9), state 0x40, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False

  Read the article

• Part 1 - Load Testing In The Cloud

  - by Tarun Arora

  Azure is fascinating, but even more fascinating is the marriage of Azure and TFS! Introduction Recently a client I worked for had 2 major business critical applications being delivered, with very little time budgeted for Performance testing, we immediately hit a bottleneck when the performance testing phase started, the in house infrastructure team could not support the hardware requirements in the short notice. It was suggested that the performance testing be performed on one of the QA environments which was a fraction of the production environment. This didn’t seem right, the team decided to turn to the cloud. The team took advantage of the elasticity offered by Azure, starting with a single test agent which was provisioned and ready for use with in 30 minutes the team scaled up to 17 test agents to perform a very comprehensive performance testing cycle. Issues were identified and resolved but the highlight was that the cost of running the ‘test rig’ proved to be less than if hosted on premise by the infrastructure team. Thank you for taking the time out to read this blog post, in the series of posts, I’ll try and cover the start to end of everything you need to know to use Azure to build your Test Rig in the cloud. But Why Azure? I have my own Data Centre… If the environment is provisioned in your own datacentre, - No matter what level of service agreement you may have with your infrastructure team there will be down time when the environment is patched - How fast can you scale up or down the environments (keeping the enterprise processes in mind) Administration, Cost, Flexibility and Scalability are the areas you would want to think around when taking the decision between your own Data Centre and Azure! How is Microsoft's Public Cloud Offering different from Amazon’s Public Cloud Offering? Microsoft's offering of the Cloud is a hybrid of Platform as a Service (PaaS) and Infrastructure as a Service (IaaS) which distinguishes Microsoft's offering from other providers such as Amazon (Amazon only offers IaaS). PaaS – Platform as a Service IaaS – Infrastructure as a Service Fills the needs of those who want to build and run custom applications as services. Similar to traditional hosting, where a business will use the hosted environment as a logical extension of the on-premises datacentre. A service provider offers a pre-configured, virtualized application server environment to which applications can be deployed by the development staff. Since the service providers manage the hardware (patching, upgrades and so forth), as well as application server uptime, the involvement of IT pros is minimized. On-demand scalability combined with hardware and application server management relieves developers from infrastructure concerns and allows them to focus on building applications. The servers (physical and virtual) are rented on an as-needed basis, and the IT professionals who manage the infrastructure have full control of the software configuration. This kind of flexibility increases the complexity of the IT environment, as customer IT professionals need to maintain the servers as though they are on-premises. The maintenance activities may include patching and upgrades of the OS and the application server, load balancing, failover clustering of database servers, backup and restoration, and any other activities that mitigate the risks of hardware and software failures.   The biggest advantage with PaaS is that you do not have to worry about maintaining the environment, you can focus all your time in solving the business problems with your solution rather than worrying about maintaining the environment. If you decide to use a VM Role on Azure, you are asking for IaaS, more on this later. A nice blog post here on the difference between Saas, PaaS and IaaS. Now that we are convinced why we should be turning to the cloud and why in specific Azure, let’s discuss about the Test Rig. The Load Test Rig – Topology Now the moment of truth, Of course a big part of getting value from cloud computing is identifying the most adequate workloads to take to the cloud, so I’ve decided to try to make a Load Testing rig where the Agents are running on Windows Azure.   I’ll talk you through the above Topology, - User: User kick starts the load test run from the developer workstation on premise. This passes the request to the Test Controller. - Test Controller: The Test Controller is on premise connected to the same domain as the developer workstation. As soon as the Test Controller receives the request it makes use of the Windows Azure Connect service to orchestrate the test responsibilities to all the Test Agents. The Windows Azure Connect endpoint software must be active on all Azure instances and on the Controller machine as well. This allows IP connectivity between them and, given that the firewall is properly configured, allows the Controller to send work loads to the agents. In parallel, the Controller will collect the performance data from the agents, using the traditional WMI mechanisms. - Test Agents: The Test Agents are on the Windows Azure Public Cloud, as soon as the test controller issues instructions to the test agents, the test agents start executing the load tests. The HTTP requests are issued against the web server on premise, the results are captured by the test agents. And finally the results are passed over to the controller. - Servers: The Web Server and DB Server are hosted on premise in the datacentre, this is usually the case with business critical applications, you probably want to manage them your self. Recap and What’s next? So, in the introduction in the series of blog posts on Load Testing in the cloud I highlighted why creating a test rig in the cloud is a good idea, what advantages does Windows Azure offer and the Test Rig topology that I will be using. I would also like to mention that i stumbled upon this [Video] on Azure in a nutshell, great watch if you are new to Windows Azure. In the next post I intend to start setting up the Load Test Environment and discuss pricing with respect to test agent machine types that will be used in the test rig. Hope you enjoyed this post, If you have any recommendations on things that I should consider or any questions or feedback, feel free to add to this blog post. Remember to subscribe to http://feeds.feedburner.com/TarunArora.  See you in Part II.   Share this post : CodeProject

  Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >