Search Results

Search found 22903 results on 917 pages for 'network namespace'.

Page 124/917 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

• Configuration of Home Network

  - by Wen Jie

  Previously my home network is as follows Speedtouch ST536 -> Linksys WRT54G But now as I have upgraded my internet subscription. My service provider gave me a "2Wire 2701 HGV" modem. I was wondering if it is possible to put the "2Wire" as an access point. So I might have a configuration as follows? Room Living Room Speedtouch ST536 -> Linksys WRT54G {Wireless} 2Wire 2701 HGV Because I find that my signal is very weak. Is there any way for me to do that?

  Read the article

• NAT rules betweek 2 network interfaces (with iptables)

  - by Simone Falcini

  this is the current network that I have: UBUNTU: eth0: ip: 212.83.10.10 bcast: 212.83.10.10 netmask 255.255.255.255 gateway 62.x.x.x eth1: ip: 192.168.1.1 bcast: 192.168.1.255 netmask: 255.255.255.0 gateway ? CENTOS: eth0: ip: 192.168.1.2 bcast: 192.168.1.255 netmask 255.255.255.0 gateway 192.168.1.1 I basically want this: Make specific NAT rules from the internet to specific internal servers depending on the port: Connections incoming to port 80 must be redirected to 192.168.1.2:80 Connections incoming to port 3306 must be redirected to 192.168.1.3:3306 and so on... I also need one NAT rule to allow the servers in the subnet 192.168.1.x to browse the internet. I need to route the requests on eth0 to eth1 to be able to exit to internet. Can I do this on the UBUNTU machine with iptables? Thanks!

  Read the article

• What is automatic service location on the network?

  - by Roman

  I know that zeroconf does automatic service location on the local network. But what does it mean? For example there is a printer (printing is the service that it does). This printer choose randomly an IP for itself. It asks other devices if this IP is already occupied. If not, the printer occupies this IP. Then printer says to "everybody" that "printing" service is associated with this IP. Is it "automatic service location"? Or I got something wrong?

  Read the article

• TCP connection between PCs in home wi-fi network

  - by Nordvind

  I want to establish a connection between 2 PCs. Point is to practice in writing client-server applications and similar stuff. I've heard around, that I can access another PC in network by address like "Router IP:port number". Am I right or i got it wrong? So how do I configure router to let connections to certain ports? And what would address look like, if I'm, say, connecting to 80 port on my home server? P.S. Will be grateful for links to some tutorials on this matter, if any.

  Read the article

• How do I establish the network sharing to my WinXP server network drive from my Mac notebook?

  - by mobibob

  I have been able to connect to my WinXP server's shared drives by using Finder's Command-K to browse the network. Unfortunately, when the server gets rebooted, the connection drops and sometimes I cannot get reconnected. I have specified different protocols (afp / cifs / smb) and different login names (connect as...) with limited success. Once I find the right combination, I am good for a few weeks. Once, it seems as though I had to unshared and shared the drive to get it to work. Unfortunately, it is very frustrating, so I try multiple things at one time, so when I finally get to the success point -- I honestly don't know what worked. I followed Mac help, surfed for instructions, issues, etc., but nothing appears to be consistent. I would love for this thread to be the ultimate answer for all time! Can anyone help me? If my description or question need more detail, please ask away!

  Read the article

• Setup IIS 7 as FTP Server that is connectable outside of my local network

  - by Usta

  I was able to setup an FTP site that I was able to access via ftp://127.0.0.1/ or my local(static) ip. To do this I followed these instructions (with the exception that I did not bind to 127.0.0.1 as suggested) http://learn.iis.net/page.aspx/301/creating-a-new-ftp-site-in-iis-7/ I have created a firewall exception for port 20 and 21, and setup port-forwarding on my wireless router. But I can only access the site via local-host, and I need to have a friend have read access to it. So how do I enable remote access to it? (I'd rather not purchase a domain-name) My setup: IIS 7.5 Windows 7 Professional Wireless Network Norton Internet Security 2012 An Internal Static IP Address

  Read the article

• Machine only responds to network requests from machines it is pinging

  - by ILikeFood

  I have two machines. WOPR: Ubuntu server edition 10.10 LTS 32 bit Adam Selene: Windows 7 home premium 64 bit / Ubuntu Desktop 10.10 LTS 64 bit I want to be able to SSH from Adam Selene to WOPR, so I connect them to the same network. Here's where things get weird. I cannot connect to WOPR in any way under normal circumstances. But, if WOPR is pinging Adam, then it starts responding to ping requests, HTTP gets, and SSH tunnels. I'm an amateur, and brand new to Ubuntu server, so I suspect there's a misconfiguration somewhere, but there's an off chance it's a bug in the OS. Does anyone know what might cause this behavior? Thanks a lot!

  Read the article

• Providing internet access to users in an Enterprise (MPLS ) Network

  - by Vivek Bernard

  Scenario I'm planning to setup a typical Head Office - Branch Office(s) Network Setup. there will be 25 branch offices in India of two will be overseas (one in US and the other in UK). All these will be connected via MPLS. Additional details: No of Concurrent users in each office is going to be 25 tranlating to 650 users The requirement is to provide "proxied" internet connectivity to the branch offices. How should I go about doing it? Plan A: Buying an internet leased line in the Head Office and distribute it through an internal proxy server to all the branches Plan B Buying separate internet lines for all the branches and setup individual proxies to all the branch offices.

  Read the article

• Utilize two gateways on the same network same interface with load balancing

  - by RushPL

  My setup is two ISPs on a single interface and single network. I can either set my default gateway to 192.168.0.1 or 192.168.1.250 and either work. My desire is to utilize both of them with some load balancing. I have tried to follow the advice given in here http://serverfault.com/a/96586 #!/bin/sh ip route show table main | grep -Ev '^default' \ | while read ROUTE ; do ip route add table ISP1 $ROUTE done ip route add default via 192.168.1.250 table ISP1 ip route add default via 192.168.0.1 table ISP2 iptables -t mangle -A PREROUTING -j CONNMARK --restore-mark iptables -t mangle -A PREROUTING -m mark ! --mark 0 -j ACCEPT iptables -t mangle -A PREROUTING -j MARK --set-mark 10 iptables -t mangle -A PREROUTING -m statistic --mode random --probability 0.5 -j MARK --set-mark 20 iptables -t mangle -A PREROUTING -j CONNMARK --save-mark Now then I do "traceroute somehost" repeatedly I can only get route through my default route which is 192.168.1.250. Shouldn't the packets change routes in a random manner? How to debug it?

  Read the article

• Outlook 2010: using signatures stored on network

  - by Gregory MOUSSAT

  With Outlook before the 2010 version, it was possible to specify any path for the signatures. With Outlook 2010, the only way is to use those stored into C:\Documents and Setting\UserName\Local Settings\Application Datas\Microsoft\Signature\ I'd like to point the signatures to a network share. Allowing us to modify the signatures into the share, instead of login on every computers each time we are asked to modify them (and this is quite often because the signatures contain logos about current events). We currently use a script to copy the signatures from the share to the local disk when users login. Question: How to set Outlook 2010 to use signatures outside of the default signature folder ?

  Read the article

• Server monitoring for medium scale UNIX network

  - by nbartolomeo

  I'm looking for suggestions for a good monitoring tools, or tools, to handle a mixed Linux (RedHat 4-5) and HPUX environment. Currently we are using Hobbit which is working reasonably well but it is becoming harder to keep track of what alerts are sent out for what servers. Features I'd like to see: Easy configuration of servers. The ability to monitor CPU, network, memory, and specific processes I've looked into Nagios but from what I have seen it won't be easy to set up the configuration for all of our servers ~200 and that without installing a plugin into each agent I won't be able to monitor processes.

  Read the article

• Network Drive Via Ethernet Port for Speed?

  - by Yar

  I have a Macbook with Firewire 400 and USB 2.0, so the only way I can get fast external storage is through the Ethernet port. A really fast firewire 800 drive on ANOTHER computer is actually much faster than the built-in drive (according to XBench). So I thought I would try to go one better and buy an ethernet-ready drive. I bought a Seagate GoFlex™ Home Network Storage System, and it seems like the only way to get it to work is to plug it into a router. Can this drive be used without a router (i.e., direct to computer)? Are there any drives that can be plugged directly into the ethernet port for fast access? I don't want the drive on my router: I want it on my computer. Ideally I'd need 7200rpm or faster, too... Update: Just chatted with Seagate and they said that this particular drive will not work that way. Will any others?

  Read the article

• Misbehaving Network Printers - options?

  - by Dan Kelly

  We are having some issue with printers on our network. We have 3 floors, 2 printers per floor (A3 & A4) all connected to the same Print Server. The issue is that the same printer may not behave the same on two different, seemingly identical desktops. The commonest place this is seen on our bulk print script in AutoCAD - occasionally drawings may print Landscape on Portrait paper, despite drawings always being Landscape... Does any one have any suggestions on what we can check / try? The current line of attack is to setup a new Print Server, with the HP universal print driver rather than the device specific drivers, and replace printers using exactly the same method on all desktops. Sound good?

  Read the article

• Ubuntu server loses network connection after ADSL2+ modem reset

  - by squashbuff

  I am using an ubuntu 10.04 server (running on a Lenovo Thinkpad notebook) as my webserver. It is performing well in terms of handling the traffic etc. However my internet connection is ADSL2+ (using Thomson TG782T modem-router) and if the modem is reset, then my server loses network connection. The networkmanager icon shows a red exclamation mark showing that is has no connection. But as soon as I click on it and tell it to connect to eth0, the connection is back on. It must be something that networkmanager is failing to do and because of this, the reliability of my webserver is suffering. Any advice on how this can be fixed?

  Read the article

• Network interface selection

  - by Antonino

  Hello. Suppose I have more than a network interfaces and I want to selectively use them per application. eth0 is the standard interface with the standard gateway in the main routing table eth1 is another interface with a different gateway. Suppose I launch an application as a user "user_eth1". I used the following set of rules for iptables / ip rules. IPTABLES: iptables -t mangle -A OUTPUT -m user --uid-owner user_eth1 -j MARK --set-mark 100 iptables -t nat -A POSTROUTING -m user -uid-owner -o eth1 user_eth1 -j SNAT --to-source <eth_ipaddress> IPRULE: ip rule add fwmark 100 lookup table100 and i build "table100" as follows (no doubts on that) ip route show table main | grep -Ev ^default | while read ROUTE; do ip route add table table100 $ROUTE; done ip route add default via <default_gateway> table table100 It doesn't work at all. What's wrong with this? Thank you in advance!

  Read the article

• Network connectivity issues with Windows Store

  - by Duy Tran

  I have my Windows 8 Pro build 9200 installed on my Dell laptop. I want to install some new apps and updates from the Store but there might be some network problem that caused the downloading gauge showing up but not really running at all. I followed some instructions that switched from local user to my Microsoft account, but this "Please wait" screen keeps showing and I don't really know why. I still have internet access and can use some apps like People, Mail, etc. with my account logged in, I can surf the net using Firefox, Chrome and Internet Explorer. I did another test using cmd with ping -t google.com and it showed that my laptop has internet access. Anybody knows a solution to make the Store working properly? Or is there any workaround to switch to the Microsoft account instead of a local user account?

  Read the article

• How to to specify network address for a dhcp client

  - by drecute

  I have setup and configured a DHCP server on a sparc running Solaris 10. Now I want to test the DHCP server by creating a DHCP client on another computer running Solaris 11. I would like to know, how do I specify a network address for a dhcp client such that its generated ip address is within a specific subnet. For example: The DHCP server host = 172.1.1.1 So I want the client machine to have an IP Address in the range of 172.1.1.1 255.255.255.0. Please help me.

  Read the article

• Connecting/Adding a private network on windows server 2008

  - by WhyMe

  Hey all, I have a dual server configuration on a host provider using VPS. I was told by my Host provider that in order to use free bandwidth between my two servers (they are in the same location) I need to add a alias "subnet" to a specific ip (A private network, VPN). How do I add an aliased ip in widnwos? in Linux the relevant command is supposed to be (By my search in blogs) "ifconfig eth0:1 10.129.175.165 netmask 255.255.255.0" They also said that another way to connect between the servers (should also be faster) is to use "private lan", but as it happens I don't know how to define one :(. Is there a windows equivalent or another way to do this? I have checked my ip config and found no indication of the private lan or the VPN ip.

  Read the article

• Cannot access internet or remote network after connecting to Windows VPN

  - by Kiewic

  I set up a VPN by creating an incoming VPN connection (VPN server) in my Windows 8 machine at home (not a Windows Server). I forwarded the PPTP port in my router (port 1723) to this machine and enabled PPTP passthrough. In a second Windows 8 machine out of home, I created an outgoing VPN connection (VPN client). And I am able to connect to my home VPN, but I don't have access to any home resource or even internet. This is the output of the client ipconfig: And this are the settings of my VPN server: UPDATE: My VPN server has assigned the 192.168.1.144 IP adress at my home network. So, I tried setting the "IP address assignment" range from 192.168.1.150 to 192.168.1.200. And when a VPN client gets connected, it gets an address in that range, but it doesn't make any difference.

  Read the article

• Will NTP work in an isolated network ( in absence of a reliable time source)

  - by Anand

  Hi, I am investigatiing a typical NTP problem. The setup is as follows :- FreeBSD is being compiled and run on Opensolaris. The config file on OpenSolaris has entry of linux and another opensolaris machine as server and these server machines are syncing time with themselves (local clock) only. The server machines in this case have NTP running on them as well. Within a few minutes of starting the ntp daemon ,client starts syncing time with itself only and remains in that situation after that.All servers are discarded and no time syncing is done with them. My question is , is there any fundamental problem with this setup. Will the NTP work in such isloated network that has no direct or indirect connection with reliable internet time source ?

  Read the article

• Home Network Photo Server

  - by CMP

  I am looking for a photo solution for our home network. We have several computers, running windows and OS X. I would like to store all of our photos in a central location, and have them be accessible from any machine. Most of our photos are currently in an iPhoto library, and ideally there would still be a way to import photos from the server to iPhoto easily. This can run really on any operating system, but it must be easily accessible for anybody. A gallery type view would be good, but also must allow direct file access and transfers. Anybody have a solution that works for them, or any ideas of what I could do?

  Read the article

• Laptop connects to other network but not to my home wireless

  - by Nilesh

  My home network's wireless SSID is say "XYZ" I also have an ethernet wire from the same router. I have two laptops A and B Earlier both A and B were able to connect to my home internet through the ethernet and wireless. Suddenly, the laptop B can no longer connect to XYZ or through ethernet. When I do plug the wire, i get the connection icon all green but when I try to access any web page it errors out (page not found) But strangely laptop B connects to my neighbours wireless SSID "ABC". I have also tested laptop B with other networks and it connects fine. Laptop A and many other devices still connect fine with my home wireless "XYZ" Strange thing is when my laptop B connects wireless through XYz, it gets the IP address but then none of the browsers (chrome,firefox, IE) can show any web pages. What settings should I be checking on laptop B that is preventing it to connect to my home internet. Thank you

  Read the article

• Appropriate Network switch for small server cluster

  - by Chris Dutrow

  Need to build a small business server cluster for the purpose of crunching data. It will not host a web site that needs to be available 24/7. It does need to support servers that host Redis, a Cassandra database cluster, and a Python web server. Operating system will most likely be Centos 6.4 Other servers in the cluster should be able to communicate very fast with each other, especially the Redis server. This will probably require the use of internal IP addresses. We will need to use multi-data center replication to synchronize the Cassandra cluster with the one that we currently have hosted on the cloud Was looking into network switches and we are unsure of the appropriate specifications that we should be looking for. Does the switch need to be "managed" or can it be "unmanged"? Does the switch need to support IPv6 or just IPv4? Do we need an enterprise level Cisco switch, or can we go with something like a $200 DLink managed (or unmanaged) small business switch? Thanks so much!

  Read the article

• No internet connection for some programmes after installing ad hoc wireless network

  - by Michael

  After installing a wireless network (through the program iPhoneModem) several programmes have stopped working when connected to the Internet using another wireless connection. Working programmes: Firefox (browser) uTorrent (p2p) FileZilla (ftp) etc. Programmes that are not working: Chrome (browser) Digsby (IM client) etc. I'm running Windows 7. I have tried to disable Windows Firewall entirely as well as AVG anti virus, with no effect. I've tried to run the FixIt program from Microsoft adressing a corrupt TCP/IP stack. This too had no effect. Any suggestions?

  Read the article

• Name of my sql server instance from outside the network

  - by Michel

  Hi, normally i connect to my sql server instance from my local computer, and then the server name to connect to is the name of my laptop. So i can connect to server instance 'MichelLaptop' But now i'm trying to connect to my server from outside my network, and the first thing i wonder is: what is the name of the instance? i've made a redirect to my local machine in the DNS of my domain, so i said (this is not the real data) testsql.mydomain.com goes to 190.191.192.193 and when i ping testsql.mydomain.com, i get a response from 190.191.192.193 But what then is the server name?

  Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >