Search Results

Search found 13341 results on 534 pages for 'obiee performance tuning'.

Page 124/534 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

• Zenoss: Getting SNMP stats over SSH

  - by normalocity

  I have the SSH connection working. I have it successfully modeling the device (Ubuntu Server, in this case). What I can't get to work is the SNMP portion. It sounds like I have to custom add the snmpwalk command when doing monitoring over SSH - in other words, have Zenoss connect via SSH, and then run an arbitrary command agains the client (in this case, an snmpwalk), and then parse the results. What I need help doing is: Add the snmpwalk command to the SSH monitoring Parsing the output and getting the data back into the charts

  Read the article

• Should I use "Raid 5 + spare" or "Raid 6"?

  - by Trevor Boyd Smith

  What is "Raid 5 + Spare" (excerpt from User Manual, Sect 4.17.2, P.54): RAID5+Spare: RAID 5+Spare is a RAID 5 array in which one disk is used as spare to rebuild the system as soon as a disk fails (Fig. 79). At least four disks are required. If one physical disk fails, the data remains available because it is read from the parity blocks. Data from a failed disk is rebuilt onto the hot spare disk. When a failed disk is replaced, the replacement becomes the new hot spare. No data is lost in the case of a single disk failure, but if a second disk fails before the system can rebuild data to the hot spare, all data in the array will be lost. What is "Raid 6" (excerpt from User Manual, Sect 4.17.2, P.54): RAID6: In RAID 6, data is striped across all disks (minimum of four) and a two parity blocks for each data block (p and q in Fig. 80) is written on the same stripe. If one physical disk fails, the data from the failed disk can be rebuilt onto a replacement disk. This Raid mode can support up to two disk failures with no data loss. RAID 6 provides for faster rebuilding of data from a failed disk. Both "Raid 5 + spare" and "Raid 6" are SO similar ... I can't tell the difference. When would "Raid 5 + Spare" be optimal? And when would "Raid 6" be optimal"? The manual dumbs down the different raid with 5 star ratings. "Raid 5 + Spare" only gets 4 stars but "Raid 6" gets 5 stars. If I were to blindly trust the manual I would conclude that "Raid 6" is always better. Is "Raid 6" always better?

  Read the article

• Where do vendors publish internal transfer rates of HDDs?

  - by red888

  So I've started to dig into storage fundamentals and found that in order to calculate the IOPS of a HDD you need to know the internal transfer rate of the drive (time it takes data to move from the platters to internal disk's cache). I went on newegg and even a few vendor sites and could not find this info published for any HDDs. Is it sometimes called something else? Take this link to a seagate HDD for instance. Nowhere do I see "internal transfer rate", but I do see something called "Sustained Data Rate OD"- is that the same thing? Just so you know where I'm getting this info (Book: "Information Storage and Management Storing, Managing..."): Consider an example with the following specifications provided for a disk: The average seek time is 5 ms in a random I/O environment; therefore, T = 5 ms. Disk rotation speed of 15,000 revolutions per minute or 250 revolutions per second — from which rotational latency (L) can be determined, which is one-half of the time taken for a full rotation or L = (0.5/250 rps expressed in ms). 40 MB/s internal data transfer rate, from which the internal transfer time (X) is derived based on the block size of the I/O — for example, an I/O with a block size of 32 KB; therefore X = 32 KB/40 MB. Consequently, the time taken by the I/O controller to serve an I/O of block size 32 KB is (TS) = 5 ms + (0.5/250) + 32 KB/40 MB = 7.8 ms. Therefore, the maximum number of I/Os serviced per second or IOPS is (1/TS) = 1/(7.8 × 10^-3) = 128 IOPS.

  Read the article

• How can I simulate a slow machine in a VM?

  - by Nathan Long

  I'm testing an AJAX-heavy web-application. I develop on a new Mac, but I use VmWare Fusion (currently 3.1.2) to test in Windows XP, using IETester to simulate older versions of IE. This lets me see how older IE versions would render the site, but I'd also like to see how the site would perform on an older machine. I see in the VM's settings that I can decrease the RAM; is there a way to also dial down the processor speed? How else might I simulate a slow machine? (I am also going to check out how to simulate a slow internet connection.)

  Read the article

• Run serveral daemon using python

  - by ylc

  I noticed that serveral daemon invoked python seperately. For example, I have both wicd and ibus daemon running on my machine. Instead of launching a single instance of python, the daemons run with two python instance at the same time in htop: /usr/bin/python2 -O /usr/share/wicd/daemon/monitor.py python2 /usr/share/ibus/ui/gtk/main.py Is it a waste of doing that? If yes, how can I improve this? If no, why avoid putting all daemons run on a single python instance?

  Read the article

• windows 2000 freezing during large disk write

  - by robert

  We have a windows 2000 sp4 server which freezes up for about 1 minutes while its web-app does a ~500mb write operation. I can see the webapp start to do I/O activity (through process explorer) then the RDP session becomes unresponsive, you can click on windows and buttons but nothing happens. When the disk write finally finishes the session 'catches up' on all the mouse clicks you did during the freeze in a mad flurry of window activity and the server returns to normal. During the freeze the web-app stops as well. The same behaviour happens on the console of the server. (so I know its not a network thing) Nothing appears in the Event logs. Its like nothing happened. I have upgraded all the HP hardware drivers to the latest proliant support pack. And also run a HP hardware diagnostics which found nothing wrong. What would cause a disk write to lock the rest of the OS?

  Read the article

• Firefox takes a really long time to load some sites on Ubuntu

  - by Dave

  Hello guys, I have an issue here. Some sites - just a few - takes a really long time to load on Firefox. One example is A List Apart (http://www.alistapart.com/) which takes more than 30 minutes (yes, minutes, not seconds). On Opera, ou even through a telnet session, the problematic sites run without problem, fast as expected. I am using Linux 8.04, running Firefox 3.6.3 downloaded from mozilla site, with a 10M ADSL connection. I tried many tweaks I found googling, like disable IPv6, and change http pipelining settings on FF's about:config. None worked. I also used Firebug to find what phase during negotiation is the bottleneck. Findings are in the screenshot. Well guys, any idea what is the issue? And how to solve it? I repeat, this only happens with firefox (3.6.3 and prior versions), for a few sites only (even sites with much more requests, images, javascripts, stylesheets work fine), and http pipelines and IPv6 tweaks on about:config didn't work. Thanks

  Read the article

• How to configure an ASUS motherboard.

  - by Absolute0

  I have an ASUS P7P55-M motherboard running with an Intel Core i5-750 processor and 4 GB RAM with 1600 MT/s speed. For some reason the default settings of the motherboard make all the components run at half their optimums. I have switched to the "D.O.C.P." profile and supposedly everything is as it's supposed to be (verified with CPU-Z). There is also an "X.M.P." profile and a manual one. Are either of the DOCP or XMP safe to go with? I wouldn't use the manual mode as I would likely mess something up real bad. XMP seems to be more memory oriented.

  Read the article

• Identify Long Running or Slow PHP Scripts

  - by Kirk

  I have web server that is getting around 25K visits a day up at yougetsignal.com. Sometimes the site feels a bit sluggish. I am hosting it on nginx with php5-fpm. Is there a way for me to see a list of all of the long running requests that are coming to the site? I'd love to have a real-time list of all of the active requests that PHP is handling and how long they have been running. Kind of like top, but just for the web server. This would let me know how long requests are taking and which script is the culprit. Anyone have any ideas on how I can do this?

  Read the article

• MySQL maintenance - how to clear the buffer?

  - by Dougal

  We have a server running our web app (PHP / MySQL) which is SLOW. My predecessor says that: "We use to do database maintenance, which use to clear the buffer, cached and unwanted variables." And I wonder what on earth he means with that statement? Does he mean a simple optimize of the tables? Or the query cache? I understand MySQL but don't really know what he is describing. I would appreciate any pointers. Thanks.

  Read the article

• MySQL Locking Up

  - by Ian

  I've got a innodb table that gets a lot of reads and almost no writes (like, 1 write for every 400,000 reads approx). I'm running into a pretty big problem though when I do INSERT into the table. MySQL completely locks up. It uses 100% cpu, and every single other table (in other databases even) have their statuses set to "Locked" until the INSERT is done. This is a big problem because MySQL stays locked up for up to 4 minutes. I'm using version 5.1.47 (rpm from mysql.com). Any ideas?

  Read the article

• Flash stream makes my internet slow and cpu rush

  - by user1225840

  When I try to watch a live Flash stream, my CPU usage goes up to 75% and my Internet speed goes down. If I run a test before the video-stream, my speed is ~40/10Mbps and during the stream it drops to 0.1-0.5Mbps. The stream is laggy and I can only watch one to two seconds at a time, start/stop/start/stop. I have cleared my history, cache, cookies, temp files, and so on. I have searched for malware and took care of that. I have updated my drivers, reinstalled Flash and everything else I can think of, but it remains slow. I had this problem before and it just started working normally from one day to another. Could it be a hardware problem?

  Read the article

• Monitoring User Login time

  - by beakersoft

  Hi, i have recently been given the task of trying to work out why the login time (not machine boot time) for some of our users seems slow. The vast majority of clients (95%) are running on XP sp3, Windows 2003 domain controlers. Most users have the same model of machine. I would like to be able to see how long each of the polices are taking to load (if possable split user and computer) and any other info that might help (services starting etc) I changed the userenvdebuglevel reg option to generate the userenv.log file but it did'nt contain very much info Thanks Luke

  Read the article

• Brand new Seagate HDD has high raw read error rate

  - by kpax

  I've just purchased a brand new Seagate ST31000524AS 1TB HDD. Manufacture date shows as January 2012 (yes that's as new as new can get), so must be one of the new batches from the post-flood Thailand. Anyway, I downloaded a copy of Active Hard Disk Monitor tool to check the S.M.A.R.T. parameters and I find the parameter Raw Read Error Rate is very low. Should I be worried? Will this rectify over time? This hdd is just 7 hours old; what gives? Edit: I meant high raw read error rate - Title updated accordingly

  Read the article

• Multiple servers vs 1 big server performace

  - by pistacchio

  Hi to all! My team of developers has suggested a server structure for an upcoming project we are developing. Our structure is "logical", meaning that the various logical components of the application (it is a distributed one) relies on different servers. Some components are more critical than others and will be subjected to more load. Our proposal was to have 1 server per component but the hardware guys suggested to replace the various machines with a single, bigger one with virtual servers. They're gonna use Blade Servers. Now, I'm not an expert at all, but my question to the guys was: so if we need, for example, 3 2GHz CPU / 2GB RAM machines and you give me 1 machine with 3 2GHz CPUs and 6 GB of RAM it is the same? They told me it is. Is this accurate? What are the advantages or disadvantages of both the solutions? What are the generally accepted best practices? Could you point out some URL reference dealing with the problem? Thank you in advance! EDIT: Some more info. The (internet / intranet) application is already layered. We have some servers on the DMZ that will expose pages to the internet and the databases are on their own machines. What we want to split (and they want to join) are some webservers that mainly expose webservices. One is a DAL that communicates with the database layer, one is our Single Sign On / User Profile application that gets called once per page and one is a clone of what seen on the Internet to be used on our lan.

  Read the article

• What's throttling the database?

  - by Troels Arvin

  Hardware: Intel x86_64 with 192GB of RAM. OS: CentOS 5.4 x86_64. DBMS: DB2 v. 9.7.1 64 bit. During certain special workloads (e.g. parallel REORGs/RUNSTATs), I've seen the server transporting 450MB/s with 25000IO/s (yes, there is probably some storage system caching happening here) while all CPU cores were happily working in an even mix of usermode/wait. And disk benchmark tools can also bring some very satisfying bandwith and IO/s numbers to the table. On the other hand, we also have another scenario: A single rather complex query with at least one large table scan. db2's "list applications" reports that the query is Executing (not locked). IO: At most 10MB/s, 500 IO/s; CPU: two cores in 99.9% wait state, all other cores 100% idle. The tables which the query reads from have been altered to have LOCKSIZE=TABLE, so I would think that lock list work is zero. What's going on in such a situation? What tools/snapshots/... can I use to gain better insight in such a case?

  Read the article

• Is there a way to have a working search bar in Explorer with Windows Search Service disabled?

  - by Desmond Hume

  I had to disable Windows Search Service (turn it off in Windows Features) for the reason that it was constantly using the hard drive in an excessive way (maybe because I've got very large quantities of files on my PC), noticeably slowing down my computer, and the Windows.edb database file grew way too large, about 2.5 GB in size. But the side-effect of it is that now the search bar is gone from any Explorer window and I miss this useful feature. So my question is, is there a way to stop Windows Search Service torturing my hard drive and still being able to search for files and folders directly from Explorer, perhaps using some third-party software?

  Read the article

• Reporting memory usage per process/program

  - by Nick Retallack

  How can I get the current memory usage (preferably in bytes so they can be added up accurately) for all running processes individually? Can I roll up the summaries for child processes into the process that spawned them? (e.g all apache threads together). Sometimes, my server runs out of memory and becomes unresponsive. I want to discover what is using up all the memory. Unfortunately, it's likely to not be a single process. Some programs spawn hundreds of processes, each using very little memory, but it adds up. On a side note, is it normal for apache to spawn 200+ processes?

  Read the article

• How can I setup a Proxy I can sniff traffic from using an ESX vswitch in promiscuous mode?

  - by sandroid

  I have a pretty specific requirement, detailed below. Here's what I'm not looking for help for, to keep things tidy and on topic: How to configure a standard proxy Any ESX setup required to facilitate traffic sniffing How to sniff traffic Any changes in design (my scope limits me) I need to setup a test environment for a network-sniffing based HTTP app monitoring tool, and I need to troubleshoot a client issue but he only has a prod network, so making changes to the config on client's system "just to try" is costly. The goal here is to create a similar system in my lab, and hit the client's webapp and redirect my traffic - using a proxy - into the lab environment. The reason I want to use a proxy is so that only this specific traffic is redirected for all to see, and not all my web traffic (like my visits to serverfault :P). Everything will run inside an ESX 4.1 machine. In there, there is a traffic collection vswitch in promiscuous mode that is not on the local network for security reasons. The VM containing our listening agent is connected to this vswitch. On the same ESX host, I will setup a basic linux server and install a proxy (either apache + mod_proxy or squid, doesn't matter). I'm looking for ideas on how to deploy this for my needs so I can then figure out how to set it up accordingly. Some ideas I've had were to setup two proxies, and have them talk to eachother through this vswitch in promiscuous mode, but it seems like alot of work. Another idea is a dual-homed proxy, but I've never seen/done that before so I'm not sure how doable it is for what I'd like. I am OK with setting up a second vswitch in promiscuous mode to facilitate this if need be, but I cannot put the vswitch on the lan (which is used so my browser would communicate with the proxy) in promiscuous mode. Any ideas are welcome.

  Read the article

• Chipset GPU causes a massive slowdown

  - by zyboxenterprises

  My AMD Radeon HD 7700 recently broke (fan stopped working and GPU overheated), and now I'm running on internal chipset graphics, and it causes a massive slowdown of the whole PC. I've changed the graphics memory from 32MB (minimum) to 256MB (highest), and it hasn't made any difference whatsoever. I'm using Windows Aero, and disabling it should have made a small difference, but it didn't; the whole PC is still slow. I know that it's not the computer build, because I built it myself, and it was a lot faster when it had the AMD Radeon HD 7700 in it, which is the reason why I believe it's the internal chipset graphics that are causing the problem. Is this behavior normal? I don't have the cash right now to go out and buy a new dedicated GPU. I'm using an ASRock N68C-GS FX motherboard with an AMD FX 4100 (overclocked to 4.3GHZ), with 4GB RAM. The overclock was an attempt to resolve this issue, and it isn't related to this issue that the integrated graphics is causing a slowdown.

  Read the article

• Why Can't I Pre-Zip Server Files?

  - by ThinkBohemian

  It's just good common sense to have your server gzip your files before they send them to users (I use Nginx) Is there anyway to save the server some overhead and pre-zip those files for the server, and if not why? For instance rather than giving the server an myscript.js and having the server zip the file and send it to the user, is there a way to create myscript.js.zip so the server doesn't have to?

  Read the article

• linux: accessing thousands of files in hash of directories

  - by 130490868091234

  I would like to know what is the most efficient way of concurrently accessing thousands of files of a similar size in a modern Linux cluster of computers. I am carrying an indexing operation in each of these files, so the 4 index files, about 5-10x smaller than the data file, are produced next to the file to index. Right now I am using a hierarchy of directories from ./00/00/00 to ./99/99/99 and I place 1 file at the end of each directory, like ./00/00/00/file000000.ext to ./00/00/00/file999999.ext. It seems to work better than having thousands of files in the same directory but I would like to know if there is a better way of laying out the files to improve access.

  Read the article

• Laptop is super slow on network

  - by Gary

  So on our network we have a bunch of wireless macs and window Operating laptops, we have a network setup with 802.11g,b,n. All the laptops seem fine except one which is only getting speeds of 54Mb. I have changed the encryption from AES to TKIP and reset the connection, i have updated the drivers, tried plugging it into the LAN and still same slow speed. Apparently the laptop with the slow speed is fine on other networks. I don't know what to do, can anyone help me?

  Read the article

• Using wildcard domains to serve images without http blocking

  - by iopener

  I read that browsers sometimes block waiting for multiple images from the same host, and I'm trying to do everything I can to speed up page load times. One caveat: I need to serve files over HTTPS. Any opinions about whether this is feasible: Setup a wildcard cert for *.domain.com. Whenever I need an image, generate an number based on a hash mod 5 of the filename, and append it to an 'img' subdomain (eg img1.domain.com, img4.domain.com, img3.domain.com, etc.); the hash will make any filename always use the same subdomain, and therefore the browser should be able to cache the images Configure a dynamic virtualhost record to point all img#. subdomains to /var/www/img I am looking for feedback about this plan. My concerns are: Will I get warnings when my page has https:// links to multiple subdomains? Is the dynamic virtualhost record I'm talking about even possible? Considering the amount of processing this would require, is it likely to even produce any kind of overall benefit? I'm probably averaging a half-dozen images per page, with only half being changed on each page refresh. Thanks in advance for you feedback.

  Read the article

• Jumbo Frames, ISCSI and ESXi

  - by vlannoob

  I have enabled Jumbo Frames (9000) in ESXi for all my vmNICs, vmKernels, vSwitches, iSCSI Bindings etc - basically anywhere in ESXi where it has an MTU settings I have put 9000 in it. The ports on the switches (Dell PowerConnects) are all set for Jumbo Frames. I have a Dell MD3200i with 2 controllers, each with 4 ports for iSCSI. Each of these ports is set to Jumbo Frames (9000) as well. So now the questions: Do I need to log into each Windows Server VM I am running and delve into the NIC properties and manually set it to Jumbo Frames in the NIC properties in the device Manager as well? Whats the best way of testing that Jumbo Frames are indeed working as intended?

  Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >