Search Results

Search found 8666 results on 347 pages for 'remote'.

Page 124/347 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

• mount_afp on linux, user rights

  - by Antonio Sesto

  I need to mount a remote filesystem on a linux box using the afp protocol. The linux box runs an old Debian 4. I downloaded the source code of mount_afp, compiled it and installed it with all the required packages. Then created /etc/fuse with the following command: mknod /dev/fuse c 10 229 (according to the instructions here) I can mount the remote filesystem as root by executing: mount_afp afp://USER:PASSWD@REMOTE_SERVER/FOLDER /mnt/MOUNTPOINT/ but the same command fails when run as normal user (of the local machine). After reading here and there, I created a group fuse, and added my normal user U to the group fuse: [prompt] groups U U fuse Then modified the group of /dev/fuse, that now has the following rights: 0 crwxrwx--- 1 root fuse 10, 229 Feb 8 15:33 /dev/fuse However, if the user U tries to mount the remote filesystem by using the same command as above, U gets the following error: Incorrect permissions on /dev/fuse, mode of device is 20770, uid/gid is 0/1007. But your effective uid/gid is 1004/1004 But the user U with uid 1004 has also gid 1007 (group fuse). I might think the problem is related to real/effective/etc. ID, but I do not know how to proceed and could not find any clear instructions. Could you please help me? There is also another problem. If I mount /mnt/MOUNTPOINT as root and run ls -l /mnt, I get: drwxrwxrwx 15 root root 466 Feb 8 16:34 MONTPOINT If I run ls -l /mnt as normal user U I get: ? ?????????? ? ? ? ? ? MOUNTPOINT in fact when I try to cd /mnt/MOUNTPOINT I get: $-> cd /mnt/MOUNTPOINT -sh: cd: /mnt/MOUNTPOINT: Not a directory Then I unmount /mnt/MOUNTPOINT as root and run again ls -l /mnt as normal user U I get: 0 drwxr-xr-x 2 root root 6 Feb 8 15:32 MOUNTPOINT/ After reading Frank's answer, I killed every shell/process running with privileges of user U. Still U cannot mount the remote filesystem, but the error message has changed. Now it is: "Login error: Authentication failed". The problem is not related to remote login/password since the same command works perfectly when run as root of the local machine. Since I cannot get mount_afp to work with normal users, I decided to follow mgorven's suggestion. So I run the commands: mount_afp -o allow_other afp://USER:PASSWD@REMOTE_SERVER/FOLDER /mnt/MOUNTPOINT/ and mount_afp -o user=U afp://USER:PASSWD@REMOTE_SERVER/FOLDER /mnt/MOUNTPOINT/ The mount succeeds but user U cannot access the mount point. If U executes ls -l in /mnt U@LOCAL_HOST [/mnt] $-> ls -l ls: cannot access MOUNT_POINT: Permission denied total 0 ? ?????????? ? ? ? ? ? MOUNT_POINT Is it so hard to have this utility working?

  Read the article

• CYGWin and sshd. Accepts authentication, but won't connect

  - by timramich

  Everything I find relating to this is the "ssh-exchange-identification:" error. This doesn't happen for me. I get two lines: Connection to localhost closed by remote host. Connection to localhost closed. ssh -v localhost spits out: OpenSSH_5.8p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to localhost [::1] port 22. debug1: Connection established. debug1: identity file /home/tim/.ssh/id_rsa type -1 debug1: identity file /home/tim/.ssh/id_rsa-cert type -1 debug1: identity file /home/tim/.ssh/id_dsa type -1 debug1: identity file /home/tim/.ssh/id_dsa-cert type -1 debug1: identity file /home/tim/.ssh/id_ecdsa type -1 debug1: identity file /home/tim/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8 debug1: match: OpenSSH_5.8 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA 64:e3:27:90:ef:48:93:21:38:ea:9b:0e:0b:07:b0:2a debug1: Host 'localhost' is known and matches the ECDSA host key. debug1: Found key in /home/tim/.ssh/known_hosts:1 debug1: ssh_ecdsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Trying private key: /home/tim/.ssh/id_rsa debug1: Trying private key: /home/tim/.ssh/id_dsa debug1: Trying private key: /home/tim/.ssh/id_ecdsa debug1: Next authentication method: keyboard-interactive debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: password tim@localhost's password: debug1: Authentication succeeded (password). Authenticated to localhost ([::1]:22). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: channel 0: free: client-session, nchannels 1 Connection to localhost closed by remote host. Connection to localhost closed. Transferred: sent 2008, received 1376 bytes, in 0.0 seconds Bytes per second: sent 64774.0, received 44387.0 debug1: Exit status -1 I'm really at wit's end here because I couldn't get Windows' remote shell to even work. I'm so sick of using VNC just to get to a shell. Plus Windows' shell sucks because there is nothing like screen. Thanks

  Read the article

• How to set all locale settings in Ubuntu

  - by Christian Schneider

  A remote installed application has some encoding problems and on my local machine it is running fine. What is the best way to "copy" my locales to the remote machine? The locales on my personal machine are configured like this: $ locale LANG=de_DE.UTF-8 LANGUAGE=de_DE:en LC_CTYPE="de_DE.UTF-8" LC_NUMERIC=en_US.UTF-8 LC_TIME=en_US.UTF-8 LC_COLLATE="de_DE.UTF-8" LC_MONETARY=en_US.UTF-8 LC_MESSAGES="de_DE.UTF-8" LC_PAPER=en_US.UTF-8 LC_NAME=en_US.UTF-8 LC_ADDRESS=en_US.UTF-8 LC_TELEPHONE=en_US.UTF-8 LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=en_US.UTF-8 LC_ALL=

  Read the article

• Windows Azure Evolution &ndash; Deploy Web Sites (WAWS Part 3)

  - by Shaun

  This is the sixth post of my Windows Azure Evolution series. After talked a bit about the new caching preview feature in the previous one, let’s back to the Windows Azure Web Sites (WAWS).   Git and GitHub Integration In the third post I introduced the overview functionality of WAWS and demonstrated how to create a WordPress blog through the build-in application gallery. And in the fourth post I covered how to use the TFS service preview to deploy an ASP.NET MVC application to the web site through the TFS integration. WAWS also have the Git integration. I’m not going to talk very detailed about the Git and GitHub integration since there are a bunch of information on the internet you can refer to. To enable the Git just go to the web site item in the developer portal and click the “Set up Git publishing”. After specified the username and password the windows azure platform will establish the Git integration and provide some basic guide. As you can see, you can download the Git binaries, commit the files and then push to the remote repository. Regarding the GitHub, since it’s built on top of Git it should work. Maarten Balliauw have a wonderful post about how to integrate GitHub to Windows Azure Web Site you can find here.   WebMatrix 2 RC WebMatrix is a lightweight web application development tool provided by Microsoft. It utilizes WebDeploy or FTP to deploy the web application to the server. And in WebMatrix 2.0 RC it added the feature to work with Windows Azure. First of all we need to download the latest WebMatrix 2 through the Web Platform Installer 4.0. Just open the WebPI and search “WebMatrix”, or go to its home page download its web installer. Once we have WebMatrix 2, we need to download the publish file of our WAWS. Let’s go to the developer portal and open the web site we want to deploy and download the publish file from the link on the right hand side. This file contains the necessary information of publishing the web site through WebDeploy and FTP, which can be used in WebMatrix, Visual Studio, etc.. Once we have the publish file we can open the WebMatrix, click the Open Site, Remote Site. Then it will bring up a dialog where we can input the information of the remote site. Since we have our publish file already, we can click the “Import publish settings” and select the publish file, then we can see the site information will be populated automatically. Click OK, the WebMatrix will connect to the remote site, which is the WAWS we had deployed already, retrieve the folders and files information. We can open files in WebMatrix and modify. But since WebMatrix is a lightweight web application tool, we cannot update the backend C# code. So in this case, we will modify the frontend home page only. After saved our modification, WebMatrix will compare the files between in local and remote and then it will only upload the modified files to Windows Azure through the connection information in the publish file. Since it only update the files which were changed, this minimized the bandwidth and deployment duration. After few seconds we back to the website and the modification had been applied.   Visual Studio and WebDeploy The publish file we had downloaded can be used not only in WebMatrix but also Visual Studio. As we know in Visual Studio we can publish a web application by clicking the “Publish” item from the project context menu in the solution explorer, and we can specify the WebDeploy, FTP or File System for the publish target. Now we can use the WAWS publish file to let Visual Studio publish the web application to WAWS. Let’s create a new ASP.NET MVC Web Application in Visual Studio 2010 and then click the “Publish” in solution explorer. Once we have the Windows Azure SDK 1.7 installed, it will update the web application publish dialog. So now we can import the publish information from the publish file. Select WebDeploy as the publish method. We can select FTP as well, which is supported by Windows Azure and the FTP information was in the same publish file. In the last step the publish wizard can check the files which will be uploaded to the remote site before the actually publishing. This gives us a chance to review and amend the files. Same as the WebMatrix, Visual Studio will compare the files between local and WAWS and determined which had been changed and need to be published. Finally Visual Studio will publish the web application to windows azure through WebDeploy protocol. Once it finished we can browse our website.   FTP Deployment The publish file we downloaded contains the connection information to our web site via both WebDeploy and FTP. When using WebMatrix and Visual Studio we can select WebDeploy or FTP. WebDeploy method can be used very easily from WebMatrix and Visual Studio, with the file compare feature. But the FTP gives more flexibility. We can use any FTP client to upload files to windows azure regardless which client and OS we are using. Open the publish file in any text editor, we can find the connection information very easily. As you can see the publish file is actually a XML file with WebDeploy and FTP information in plain text attributes. And once we have the FTP URL, username and password, when can connect to the site and upload and download files. For example I opened FileZilla and connected to my WAWS through FTP. Then I can download files I am interested in and modify them on my local disk. Then upload back to windows azure through FileZilla. Then I can see the new page.   Summary In this simple and quick post I introduced vary approaches to deploy our web application to Windows Azure Web Site. It supports TFS integration which I mentioned previously. It also supports Git and GitHub, WebDeploy and FTP as well.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• Movement prediction for non-shooters

  - by ShadowChaser

  I'm working on an isometric 2D game with moderate-scale multiplayer, approximately 20-30 players connected at once to a persistent server. I've had some difficulty getting a good movement prediction implementation in place. Physics/Movement The game doesn't have a true physics implementation, but uses the basic principles to implement movement. Rather than continually polling input, state changes (ie/ mouse down/up/move events) are used to change the state of the character entity the player is controlling. The player's direction (ie/ north-east) is combined with a constant speed and turned into a true 3D vector - the entity's velocity. In the main game loop, "Update" is called before "Draw". The update logic triggers a "physics update task" that tracks all entities with a non-zero velocity uses very basic integration to change the entities position. For example: entity.Position += entity.Velocity.Scale(ElapsedTime.Seconds) (where "Seconds" is a floating point value, but the same approach would work for millisecond integer values). The key point is that no interpolation is used for movement - the rudimentary physics engine has no concept of a "previous state" or "current state", only a position and velocity. State Change and Update Packets When the velocity of the character entity the player is controlling changes, a "move avatar" packet is sent to the server containing the entity's action type (stand, walk, run), direction (north-east), and current position. This is different from how 3D first person games work. In a 3D game the velocity (direction) can change frame to frame as the player moves around. Sending every state change would effectively transmit a packet per frame, which would be too expensive. Instead, 3D games seem to ignore state changes and send "state update" packets on a fixed interval - say, every 80-150ms. Since speed and direction updates occur much less frequently in my game, I can get away with sending every state change. Although all of the physics simulations occur at the same speed and are deterministic, latency is still an issue. For that reason, I send out routine position update packets (similar to a 3D game) but much less frequently - right now every 250ms, but I suspect with good prediction I can easily boost it towards 500ms. The biggest problem is that I've now deviated from the norm - all other documentation, guides, and samples online send routine updates and interpolate between the two states. It seems incompatible with my architecture, and I need to come up with a better movement prediction algorithm that is closer to a (very basic) "networked physics" architecture. The server then receives the packet and determines the players speed from it's movement type based on a script (Is the player able to run? Get the player's running speed). Once it has the speed, it combines it with the direction to get a vector - the entity's velocity. Some cheat detection and basic validation occurs, and the entity on the server side is updated with the current velocity, direction, and position. Basic throttling is also performed to prevent players from flooding the server with movement requests. After updating its own entity, the server broadcasts an "avatar position update" packet to all other players within range. The position update packet is used to update the client side physics simulations (world state) of the remote clients and perform prediction and lag compensation. Prediction and Lag Compensation As mentioned above, clients are authoritative for their own position. Except in cases of cheating or anomalies, the client's avatar will never be repositioned by the server. No extrapolation ("move now and correct later") is required for the client's avatar - what the player sees is correct. However, some sort of extrapolation or interpolation is required for all remote entities that are moving. Some sort of prediction and/or lag-compensation is clearly required within the client's local simulation / physics engine. Problems I've been struggling with various algorithms, and have a number of questions and problems: Should I be extrapolating, interpolating, or both? My "gut feeling" is that I should be using pure extrapolation based on velocity. State change is received by the client, client computes a "predicted" velocity that compensates for lag, and the regular physics system does the rest. However, it feels at odds to all other sample code and articles - they all seem to store a number of states and perform interpolation without a physics engine. When a packet arrives, I've tried interpolating the packet's position with the packet's velocity over a fixed time period (say, 200ms). I then take the difference between the interpolated position and the current "error" position to compute a new vector and place that on the entity instead of the velocity that was sent. However, the assumption is that another packet will arrive in that time interval, and it's incredibly difficult to "guess" when the next packet will arrive - especially since they don't all arrive on fixed intervals (ie/ state changes as well). Is the concept fundamentally flawed, or is it correct but needs some fixes / adjustments? What happens when a remote player stops? I can immediately stop the entity, but it will be positioned in the "wrong" spot until it moves again. If I estimate a vector or try to interpolate, I have an issue because I don't store the previous state - the physics engine has no way to say "you need to stop after you reach position X". It simply understands a velocity, nothing more complex. I'm reluctant to add the "packet movement state" information to the entities or physics engine, since it violates basic design principles and bleeds network code across the rest of the game engine. What should happen when entities collide? There are three scenarios - the controlling player collides locally, two entities collide on the server during a position update, or a remote entity update collides on the local client. In all cases I'm uncertain how to handle the collision - aside from cheating, both states are "correct" but at different time periods. In the case of a remote entity it doesn't make sense to draw it walking through a wall, so I perform collision detection on the local client and cause it to "stop". Based on point #2 above, I might compute a "corrected vector" that continually tries to move the entity "through the wall" which will never succeed - the remote avatar is stuck there until the error gets too high and it "snaps" into position. How do games work around this?

  Read the article

• Losing internet connectivity on server after installing LogMeIn Hamachi (with server set as gateway node)

  - by Kim Jong-Un

  Our domain controller (SBS 2003) completely lost internet and network connectivity yesterday after I remotely installed LogMeIn Hamachi on it and set it to be a gateway node- in an attempt to create a VPN link between the server and a remote site. I had to go in to the office to resolve the problem as, unsurprisingly, my own remote access to the server was also lost. I was only able to restore network connectivity by deleting a virtual network adapter Hamachi created when making the server the gateway node (called "Hamachi bridge" I believe), then rebooting the server. This is a repeatable problem. Every time I try to get this to work, it just takes the server offline. Why would this bridge affect regular TCP/IP connectivity on the NIC in this way? I have tried a "hub-and-spoke" configuration between the server and our PC at a remote site (server set as hub, remote site as spoke). This caused no such problems with general internet connectivity, and file transfer worked well between the two computers. However, there was a DNS issue with the VPN between the two sites- resulting in Active Directory not being able to communicate between them (could not log on using domain user accounts at remote site if they were not already cached on that machine). I only tried a "gateway" network as LogMeIn support told me: If you can get the Active Directory to work it would only be through a "Gateway" network type with the server acting as the Gateway Node. You would configure the gateway settings on the server in the Hamachi client on that machine to push whatever IP's/DNS settings you prefer and at that point AD would be able (all things being equal) communicate to the client node when it attaches. We do not have any ActiveDirectory configuration info as that's outside the scope of our support. I hope this helps. It would be fantastic if I could get Active Directory to work over a Hamachi VPN connection, without worrying about the server going offline in this way. Does anyone have any ideas how I should proceed, or any theories as to what is going on when I try to use the "gateway" network type? I want to try to narrow down what is going on here.

  Read the article

• wave-vs.net

  - by Sean Feldman

  This is an interesting plug-in for VS.NET 2008/2010 to allow remote pair-programming. I’m a big advocate for pair-programming and collaborative work, so this plug-in has its place in the real world. I used to pair-program with a developer that was remote, and we used VNC/RDC, but this one is way better.

  Read the article

• How to list pages in a category as bullet points in MediaWiki?

  - by Sandra Schlichting

  I'm using MediaWiki and I would like to list pages with a specific tag in alphabetical order. I.e. If the following 5 pages have the category "Backup" I would get a list similar to Printing Programming Remote Access Remote Sound Smartcard DynamicPageList with <DynamicPageList> category = Backup </DynamicPageList> gives me what I am looking for, but not in alphabetical order based on page title. Does anyone know how to do this?

  Read the article

• Secure Your Wireless Router: 8 Things You Can Do Right Now

  - by Chris Hoffman

  A security researcher recently discovered a backdoor in many D-Link routers, allowing anyone to access the router without knowing the username or password. This isn’t the first router security issue and won’t be the last. To protect yourself, you should ensure that your router is configured securely. This is about more than just enabling Wi-Fi encryption and not hosting an open Wi-Fi network. Disable Remote Access Routers offer a web interface, allowing you to configure them through a browser. The router runs a web server and makes this web page available when you’re on the router’s local network. However, most routers offer a “remote access” feature that allows you to access this web interface from anywhere in the world. Even if you set a username and password, if you have a D-Link router affected by this vulnerability, anyone would be able to log in without any credentials. If you have remote access disabled, you’d be safe from people remotely accessing your router and tampering with it. To do this, open your router’s web interface and look for the “Remote Access,” “Remote Administration,” or “Remote Management” feature. Ensure it’s disabled — it should be disabled by default on most routers, but it’s good to check. Update the Firmware Like our operating systems, web browsers, and every other piece of software we use, router software isn’t perfect. The router’s firmware — essentially the software running on the router — may have security flaws. Router manufacturers may release firmware updates that fix such security holes, although they quickly discontinue support for most routers and move on to the next models. Unfortunately, most routers don’t have an auto-update feature like Windows and our web browsers do — you have to check your router manufacturer’s website for a firmware update and install it manually via the router’s web interface. Check to be sure your router has the latest available firmware installed. Change Default Login Credentials Many routers have default login credentials that are fairly obvious, such as the password “admin”. If someone gained access to your router’s web interface through some sort of vulnerability or just by logging onto your Wi-Fi network, it would be easy to log in and tamper with the router’s settings. To avoid this, change the router’s password to a non-default password that an attacker couldn’t easily guess. Some routers even allow you to change the username you use to log into your router. Lock Down Wi-Fi Access If someone gains access to your Wi-Fi network, they could attempt to tamper with your router — or just do other bad things like snoop on your local file shares or use your connection to downloaded copyrighted content and get you in trouble. Running an open Wi-Fi network can be dangerous. To prevent this, ensure your router’s Wi-Fi is secure. This is pretty simple: Set it to use WPA2 encryption and use a reasonably secure passphrase. Don’t use the weaker WEP encryption or set an obvious passphrase like “password”. Disable UPnP A variety of UPnP flaws have been found in consumer routers. Tens of millions of consumer routers respond to UPnP requests from the Internet, allowing attackers on the Internet to remotely configure your router. Flash applets in your browser could use UPnP to open ports, making your computer more vulnerable. UPnP is fairly insecure for a variety of reasons. To avoid UPnP-based problems, disable UPnP on your router via its web interface. If you use software that needs ports forwarded — such as a BitTorrent client, game server, or communications program — you’ll have to forward ports on your router without relying on UPnP. Log Out of the Router’s Web Interface When You’re Done Configuring It Cross site scripting (XSS) flaws have been found in some routers. A router with such an XSS flaw could be controlled by a malicious web page, allowing the web page to configure settings while you’re logged in. If your router is using its default username and password, it would be easy for the malicious web page to gain access. Even if you changed your router’s password, it would be theoretically possible for a website to use your logged-in session to access your router and modify its settings. To prevent this, just log out of your router when you’re done configuring it — if you can’t do that, you may want to clear your browser cookies. This isn’t something to be too paranoid about, but logging out of your router when you’re done using it is a quick and easy thing to do. Change the Router’s Local IP Address If you’re really paranoid, you may be able to change your router’s local IP address. For example, if its default address is 192.168.0.1, you could change it to 192.168.0.150. If the router itself were vulnerable and some sort of malicious script in your web browser attempted to exploit a cross site scripting vulnerability, accessing known-vulnerable routers at their local IP address and tampering with them, the attack would fail. This step isn’t completely necessary, especially since it wouldn’t protect against local attackers — if someone were on your network or software was running on your PC, they’d be able to determine your router’s IP address and connect to it. Install Third-Party Firmwares If you’re really worried about security, you could also install a third-party firmware such as DD-WRT or OpenWRT. You won’t find obscure back doors added by the router’s manufacturer in these alternative firmwares. Consumer routers are shaping up to be a perfect storm of security problems — they’re not automatically updated with new security patches, they’re connected directly to the Internet, manufacturers quickly stop supporting them, and many consumer routers seem to be full of bad code that leads to UPnP exploits and easy-to-exploit backdoors. It’s smart to take some basic precautions. Image Credit: Nuscreen on Flickr     

  Read the article

• Synchronise Database between servers via php [closed]

  - by Emmanuel

  Hi Guys, I'm needing to synchronise two mysql databases between different servers on a regular basis, by a client-initiated interface. I've been doing it by remote MYSQL connection, and adding the IP of the servers to the whitelist for MYSQL remote connections. Problem is however, that the client has a dynamic IP, so as soon as it changes they can no longer sync. So I'm trying to find an alternative way of synchronising the two databases via some sort of secure php script.

  Read the article

• Replace a failed drive in Linux RAID

  <b>Tech Republic:</b> "A few weeks ago I had the distinct displeasure of waking up to a series of emails indicating that a series of RAID arrays on a remote system had degraded. The remote system was still running, but one of the hard drives was pretty much dead."

  Read the article

• Windows 2008 R2 IPsec encryption in tunnel mode, hosts in same subnet

  - by fission

  In Windows there appear to be two ways to set up IPsec: The IP Security Policy Management MMC snap-in (part of secpol.msc, introduced in Windows 2000). The Windows Firewall with Advanced Security MMC snap-in (wf.msc, introduced in Windows 2008/Vista). My question concerns #2 – I already figured out what I need to know for #1. (But I want to use the ‘new’ snap-in for its improved encryption capabilities.) I have two Windows Server 2008 R2 computers in the same domain (domain members), on the same subnet: server2 172.16.11.20 server3 172.16.11.30 My goal is to encrypt all communication between these two machines using IPsec in tunnel mode, so that the protocol stack is: IP ESP IP …etc. First, on each computer, I created a Connection Security Rule: Endpoint 1: (local IP address), eg 172.16.11.20 for server2 Endpoint 2: (remote IP address), eg 172.16.11.30 Protocol: Any Authentication: Require inbound and outbound, Computer (Kerberos V5) IPsec tunnel: Exempt IPsec protected connections Local tunnel endpoint: Any Remote tunnel endpoint: (remote IP address), eg 172.16.11.30 At this point, I can ping each machine, and Wireshark shows me the protocol stack; however, nothing is encrypted (which is expected at this point). I know that it's unencrypted because Wireshark can decode it (using the setting Attempt to detect/decode NULL encrypted ESP payloads) and the Monitor Security Associations Quick Mode display shows ESP Encryption: None. Then on each server, I created Inbound and Outbound Rules: Protocol: Any Local IP addresses: (local IP address), eg 172.16.11.20 Remote IP addresses: (remote IP address), eg 172.16.11.30 Action: Allow the connection if it is secure Require the connections to be encrypted The problem: Though I create the Inbound and Outbound Rules on each server to enable encryption, the data is still going over the wire (wrapped in ESP) with NULL encryption. (You can see this in Wireshark.) When the arrives at the receiving end, it's rejected (presumably because it's unencrypted). [And, disabling the Inbound rule on the receiving end causes it to lock up and/or bluescreen – fun!] The Windows Firewall log says, eg: 2014-05-30 22:26:28 DROP ICMP 172.16.11.20 172.16.11.30 - - 60 - - - - 8 0 - RECEIVE I've tried varying a few things: In the Rules, setting the local IP address to Any Toggling the Exempt IPsec protected connections setting Disabling rules (eg disabling one or both sets of Inbound or Outbound rules) Changing the protocol (eg to just TCP) But realistically there aren't that many knobs to turn. Does anyone have any ideas? Has anyone tried to set up tunnel mode between two hosts using Windows Firewall? I've successfully got it set up in transport mode (ie no tunnel) using exactly the same set of rules, so I'm a bit surprised that it didn't Just Work™ with the tunnel added.

  Read the article

• How to enable and connect to RDP on a Windows Azure Web Role Instance?

  - by Enrique Lima

  We all know there have been some updates to Windows Azure, and one of the biggest I would say is the capability of being able to remote into the “OS level” of the image running a role.  And I am not talking about VM Role, I am talking about a Web Role for example. As developers we use Visual Studio, and when we are getting ready to deploy a project, we have the option of enabling this. Here is how: 1.  We publish our Project 2. On the Deployment dialog, provide all the details for your account, and before clicking OK, click on Configure Remote Desktop connections. 3.  Enable connections and the rest of the configuration.  Now, here is where there is an extra set of steps.  The first thing to know: The certificate used here is different from the other certs you have in place.  I created a new one, the went into certmgr.msc, then to Personal, then I selected the cert I just created.  Did a right-click, then All Tasks > Export.  Because what is needed is a pfx package, make sure when exporting you select to export the private key. 4. Click OK, on the Remote Desktop Configuration screen, now before you click OK on the Deployment, you will need to visit the Azure Portal. And perform the following: Go to your hosted services. Then with the service available, select the Certificates folder location. Then, select Add Certificate from the toolbar (more like Azure Portal Ribbon) Provide the details to upload the recently create pfx file. That will create the Certificate. Click OK on the deployment dialog, this kick off the deployment process. 5. Now, we need to go to the Windows Azure Portal.  Here we will select the Web Role deployed and Configure RDP. 6. Time to test.  Click on the Instance (not the role), this will make the Remote Access Connect Button available.  A file will start the process to be downloaded too 7. You will then be prompted for the credentials you configured. 8.  Validate connectivity … 9. Open IIS Manager … From here on, this is a way to manage and work with your Instance.

  Read the article

• What's new in EJB 3.2 ? - Java EE 7 chugging along!

  - by arungupta

  EJB 3.1 added a whole ton of features for simplicity and ease-of-use such as @Singleton, @Asynchronous, @Schedule, Portable JNDI name, EJBContainer.createEJBContainer, EJB 3.1 Lite, and many others. As part of Java EE 7, EJB 3.2 (JSR 345) is making progress and this blog will provide highlights from the work done so far. This release has been particularly kept small but include several minor improvements and tweaks for usability. More features in EJB.Lite Asynchronous session bean Non-persistent EJB Timer service This also means these features can be used in embeddable EJB container and there by improving testability of your application. Pruning - The following features were made Proposed Optional in Java EE 6 and are now made optional. EJB 2.1 and earlier Entity Bean Component Contract for CMP and BMP Client View of an EJB 2.1 and earlier Entity Bean EJB QL: Query Language for CMP Query Methods JAX-RPC-based Web Service Endpoints and Client View The optional features are moved to a separate document and as a result EJB specification is now split into Core and Optional documents. This allows the specification to be more readable and better organized. Updates and Improvements Transactional lifecycle callbacks in Stateful Session Beans, only for CMT. In EJB 3.1, the transaction context for lifecyle callback methods (@PostConstruct, @PreDestroy, @PostActivate, @PrePassivate) are defined as shown. @PostConstruct @PreDestroy @PrePassivate @PostActivate Stateless Unspecified Unspecified N/A N/A Stateful Unspecified Unspecified Unspecified Unspecified Singleton Bean's transaction management type Bean's transaction management type N/A N/A In EJB 3.2, stateful session bean lifecycle callback methods can opt-in to be transactional. These methods are then executed in a transaction context as shown. @PostConstruct @PreDestroy @PrePassivate @PostActivate Stateless Unspecified Unspecified N/A N/A Stateful Bean's transaction management type Bean's transaction management type Bean's transaction management type Bean's transaction management type Singleton Bean's transaction management type Bean's transaction management type N/A N/A For example, the following stateful session bean require a new transaction to be started for @PostConstruct and @PreDestroy lifecycle callback methods. @Statefulpublic class HelloBean {   @PersistenceContext(type=PersistenceContextType.EXTENDED)   private EntityManager em;    @TransactionAttribute(TransactionAttributeType.REQUIRES_NEW)   @PostConstruct   public void init() {        myEntity = em.find(...);   }   @TransactionAttribute(TransactionAttributeType.REQUIRES_NEW)    @PostConstruct    public void destroy() {        em.flush();    }} Notice, by default the lifecycle callback methods are not transactional for backwards compatibility. They need to be explicitly opt-in to be made transactional. Opt-out of passivation for stateful session bean - If your stateful session bean needs to stick around or it has non-serializable field then the bean can be opt-out of passivation as shown. @Stateful(passivationCapable=false)public class HelloBean {    private NonSerializableType ref = ... . . .} Simplified the rules to define all local/remote views of the bean. For example, if the bean is defined as: @Statelesspublic class Bean implements Foo, Bar {    . . .} where Foo and Bar have no annotations of their own, then Foo and Bar are exposed as local views of the bean. The bean may be explicitly marked @Local as @Local@Statelesspublic class Bean implements Foo, Bar {    . . .} then this is the same behavior as explained above, i.e. Foo and Bar are local views. If the bean is marked @Remote as: @Remote@Statelesspublic class Bean implements Foo, Bar {    . . .} then Foo and Bar are remote views. If an interface is marked @Local or @Remote then each interface need to be explicitly marked explicitly to be exposed as a view. For example: @Remotepublic interface Foo { . . . }@Statelesspublic class Bean implements Foo, Bar {    . . .} only exposes one remote interface Foo. Section 4.9.7 from the specification provide more details about this feature. TimerService.getAllTimers is a newly added convenience API that returns all timers in the same bean. This is only for displaying the list of timers as the timer can only be canceled by its owner. Removed restriction to obtain the current class loader, and allow to use java.io package. This is handy if you want to do file access within your beans. JMS 2.0 alignment - A standard list of activation-config properties is now defined destinationLookup connectionFactoryLookup clientId subscriptionName shareSubscriptions Tons of other clarifications through out the spec. Appendix A provide a comprehensive list of changes since EJB 3.1. ThreadContext in Singleton is guaranteed to be thread-safe. Embeddable container implement Autocloseable. A complete replay of Enterprise JavaBeans Today and Tomorrow from JavaOne 2012 can be seen here (click on CON4654_mp4_4654_001 in Media). The specification is still evolving so the actual property or method names or their actual behavior may be different from the currently proposed ones. Are there any improvements that you'd like to see in EJB 3.2 ? The EJB 3.2 Expert Group would love to hear your feedback. An Early Draft of the specification is available. The latest version of the specification can always be downloaded from here. Java EE 7 Specification Status EJB Specification Project JIRA of EJB Specification JSR Expert Group Discussion Archive These features will start showing up in GlassFish 4 Promoted Builds soon.

  Read the article

• Best language on Linux to replace manual tasks that use SSH/Telnet? [on hold]

  - by Calab

  I've been tasked to create and maintain a web browser based interface to replace several of the manual tasks that we perform now. I currently have a "shakey" but working program written in Perl (2779 lines) that uses basic Expect coding, but it has some limitations that require a great deal of coding to get around. Because of this I am going to do a complete rewrite and want to do it "right" this time. My question is this... What would be the best language to use to create a web based interface to perform SSH/Telnet tasks that we would normally do manually? Keep in mind the following requirements: Runs on a CentOS Linux system v5.10 Http will be served by Apache2 This is an INTRANET site and only accessible within our organization. User load will be light. No more that 5 users accessing it at one time. perl 5.8.8, php 5.3.3, python 2.7.2 are available... Not sure what other languages to check for, or what modules might be installed in each language. The web interface will need to provide progress indicators and text output produced by the remote connection, in real time as it is generated. If we are running our process on multiple hosts, they should be in individual threads so that they can run side by side, not sequentially. I want the ability to "trap" on specific text generated by the remote host and display an alert to the user - such as when the remote host generates an error message. I would like to avoid as much client side scripting (javascript/vbscript) as I can. Most users will be on Windows PC's using Chrome or IE as a browser. Users will be downloading the resulting output so they can process it as they see fit. I currently have no experience with "Ajax" or the like. Most of my coding experience is old 6809 assembly, Visual Basic 6, and whatever I can cut/paste from online examples in various languages (hence my "shaky" Perl program) My coding environment is Eclipse for remote code editing, but I prefer stuff like UltraEdit if I can get a decent syntax file for the language I'm using. I do have su access on the server, but I'm not the only one using this server so I can't just upgrade/install blindly as I might impact other software currently running on the machine. One reason that I'm asking here, instead of searching (which I did) is that most replies were, "use language 'xyz', but you need to use an external SSH connection" - like I'm using Expect in my Perl script. Most also did not agree on what language that 'xyz' should be. ...so, after this long posting, can someone offer some advice?

  Read the article

• Is there a way to replicate a very large file shares in real-time?

  - by fsckin

  I have an hourly cron job that copies about 40GB of data from a source folder into a new folder with the hour appended on the end. When it's done, the job prunes anything older than 24 hours. This data changes very often during work hours and is on a samba file share. Here's how the folder structure looks: \server\Version.1 \server\Version.2 \server\Version.3 ... \server\Version.24 The contents of each new folder compared to the last one usually doesn't change very much, since this is a hourly job. Now you might be thinking that I'm an idiot for setting dreaming this up. Truth is, I just found out. It's actually been used for years and is so incredibly simple, anyone could delete the ENTIRE 40GB share (imagine that dialog spooling up... deleting thousands and thousands of files) and it would actually be faster to restore by moving the latest copy back to the source than it took to delete. Brilliant! Now to top this off, I need to efficiently replicate this 960GB of "mostly similar" data to a remote server over WAN link, with the replication happening as close to real-time as possible -- think hot spare, disaster recovery, etc. My first thought was rsync. Total failure. Rsync sees it sees a deletion of the folder that is 24 hours old and the addition of a new folder with 30GB of data to sync! I also looked at rdiff-backup and unison, they both appear to use similar algorithms and do not keep enough meta-data to do this intelligently. Best thing that I can find "out of the box" to do this is Windows Server "Distributed Filesystem Replication" which uses "Remote Differential Compression" -- After reading the background information on how this works, it actually looks like exactly what I need. Problem: Both servers are running Linux. D'oh! One approach to this I'm looking at is this, say it's 5AM and the cron job finishes: New Version.5 folder arrives at on local server SSH to remote server and copy Version.4 to Version.5 Run rsync on the local server pushing changes to the remote server. Rsync finally knows to do a differential copy between Version.4 and Version.5 Is there a smarter way to replicate Samba shares as close to real-time as possible? Anything out there that does "Remote Differential Compression" on Linux?

  Read the article

• Announcing the release of the Windows Azure SDK 2.1 for .NET

  - by ScottGu

  Today we released the v2.1 update of the Windows Azure SDK for .NET.  This is a major refresh of the Windows Azure SDK and it includes some great new features and enhancements. These new capabilities include: Visual Studio 2013 Preview Support: The Windows Azure SDK now supports using the new VS 2013 Preview Visual Studio 2013 VM Image: Windows Azure now has a built-in VM image that you can use to host and develop with VS 2013 in the cloud Visual Studio Server Explorer Enhancements: Redesigned with improved filtering and auto-loading of subscription resources Virtual Machines: Start and Stop VM’s w/suspend billing directly from within Visual Studio Cloud Services: New Emulator Express option with reduced footprint and Run as Normal User support Service Bus: New high availability options, Notification Hub support, Improved VS tooling PowerShell Automation: Lots of new PowerShell commands for automating Web Sites, Cloud Services, VMs and more All of these SDK enhancements are now available to start using immediately and you can download the SDK from the Windows Azure .NET Developer Center.  Visual Studio’s Team Foundation Service (http://tfs.visualstudio.com/) has also been updated to support today’s SDK 2.1 release, and the SDK 2.1 features can now be used with it (including with automated builds + tests). Below are more details on the new features and capabilities released today: Visual Studio 2013 Preview Support Today’s Window Azure SDK 2.1 release adds support for the recent Visual Studio 2013 Preview. The 2.1 SDK also works with Visual Studio 2010 and Visual Studio 2012, and works side by side with the previous Windows Azure SDK 1.8 and 2.0 releases. To install the Windows Azure SDK 2.1 on your local computer, choose the “install the sdk” link from the Windows Azure .NET Developer Center. Then, chose which version of Visual Studio you want to use it with.  Clicking the third link will install the SDK with the latest VS 2013 Preview: If you don’t already have the Visual Studio 2013 Preview installed on your machine, this will also install Visual Studio Express 2013 Preview for Web. Visual Studio 2013 VM Image Hosted in the Cloud One of the requests we’ve heard from several customers has been to have the ability to host Visual Studio within the cloud (avoiding the need to install anything locally on your computer). With today’s SDK update we’ve added a new VM image to the Windows Azure VM Gallery that has Visual Studio Ultimate 2013 Preview, SharePoint 2013, SQL Server 2012 Express and the Windows Azure 2.1 SDK already installed on it.  This provides a really easy way to create a development environment in the cloud with the latest tools. With the recent shutdown and suspend billing feature we shipped on Windows Azure last month, you can spin up the image only when you want to do active development, and then shut down the virtual machine and not have to worry about usage charges while the virtual machine is not in use. You can create your own VS image in the cloud by using the New->Compute->Virtual Machine->From Gallery menu within the Windows Azure Management Portal, and then by selecting the “Visual Studio Ultimate 2013 Preview” template: Visual Studio Server Explorer: Improved Filtering/Management of Subscription Resources With the Windows Azure SDK 2.1 release you’ll notice significant improvements in the Visual Studio Server Explorer. The explorer has been redesigned so that all Windows Azure services are now contained under a single Windows Azure node.  From the top level node you can now manage your Windows Azure credentials, import a subscription file or filter Server Explorer to only show services from particular subscriptions or regions. Note: The Web Sites and Mobile Services nodes will appear outside the Windows Azure Node until the final release of VS 2013. If you have installed the ASP.NET and Web Tools Preview Refresh, though, the Web Sites node will appear inside the Windows Azure node even with the VS 2013 Preview. Once your subscription information is added, Windows Azure services from all your subscriptions are automatically enumerated in the Server Explorer. You no longer need to manually add services to Server Explorer individually. This provides a convenient way of viewing all of your cloud services, storage accounts, service bus namespaces, virtual machines, and web sites from one location: Subscription and Region Filtering Support Using the Windows Azure node in Server Explorer, you can also now filter your Windows Azure services in the Server Explorer by the subscription or region they are in.  If you have multiple subscriptions but need to focus your attention to just a few subscription for some period of time, this a handy way to hide the services from other subscriptions view until they become relevant. You can do the same sort of filtering by region. To enable this, just select “Filter Services” from the context menu on the Windows Azure node: Then choose the subscriptions and/or regions you want to filter by. In the below example, I’ve decided to show services from my pay-as-you-go subscription within the East US region: Visual Studio will then automatically filter the items that show up in the Server Explorer appropriately: With storage accounts and service bus namespaces, you sometimes need to work with services outside your subscription. To accommodate that scenario, those services allow you to attach an external account (from the context menu). You’ll notice that external accounts have a slightly different icon in server explorer to indicate they are from outside your subscription. Other Improvements We’ve also improved the Server Explorer by adding additional properties and actions to the service exposed. You now have access to most of the properties on a cloud service, deployment slot, role or role instance as well as the properties on storage accounts, virtual machines and web sites. Just select the object of interest in Server Explorer and view the properties in the property pane. We also now have full support for creating/deleting/update storage tables, blobs and queues from directly within Server Explorer.  Simply right-click on the appropriate storage account node and you can create them directly within Visual Studio: Virtual Machines: Start/Stop within Visual Studio Virtual Machines now have context menu actions that allow you start, shutdown, restart and delete a Virtual Machine directly within the Visual Studio Server Explorer. The shutdown action enables you to shut down the virtual machine and suspend billing when the VM is not is use, and easily restart it when you need it: This is especially useful in Dev/Test scenarios where you can start a VM – such as a SQL Server – during your development session and then shut it down / suspend billing when you are not developing (and no longer be billed for it). You can also now directly remote desktop into VMs using the “Connect using Remote Desktop” context menu command in VS Server Explorer.  Cloud Services: Emulator Express with Run as Normal User Support You can now launch Visual Studio and run your cloud services locally as a Normal User (without having to elevate to an administrator account) using a new Emulator Express option included as a preview feature with this SDK release.  Emulator Express is a version of the Windows Azure Compute Emulator that runs a restricted mode – one instance per role – and it doesn’t require administrative permissions and uses 40% less resources than the full Windows Azure Emulator. Emulator Express supports both web and worker roles. To run your application locally using the Emulator Express option, simply change the following settings in the Windows Azure project. On the shortcut menu for the Windows Azure project, choose Properties, and then choose the Web tab. Check the setting for IIS (Internet Information Services). Make sure that the option is set to IIS Express, not the full version of IIS. Emulator Express is not compatible with full IIS. On the Web tab, choose the option for Emulator Express. Service Bus: Notification Hubs With the Windows Azure SDK 2.1 release we are adding support for Windows Azure Notification Hubs as part of our official Windows Azure SDK, inside of Microsoft.ServiceBus.dll (previously the Notification Hub functionality was in a preview assembly). You are now able to create, update and delete Notification Hubs programmatically, manage your device registrations, and send push notifications to all your mobile clients across all platforms (Windows Store, Windows Phone 8, iOS, and Android). Learn more about Notification Hubs on MSDN here, or watch the Notification Hubs //BUILD/ presentation here. Service Bus: Paired Namespaces One of the new features included with today’s Windows Azure SDK 2.1 release is support for Service Bus “Paired Namespaces”.  Paired Namespaces enable you to better handle situations where a Service Bus service namespace becomes unavailable (for example: due to connectivity issues or an outage) and you are unable to send or receive messages to the namespace hosting the queue, topic, or subscription. Previously,to handle this scenario you had to manually setup separate namespaces that can act as a backup, then implement manual failover and retry logic which was sometimes tricky to get right. Service Bus now supports Paired Namespaces, which enables you to connect two namespaces together. When you activate the secondary namespace, messages are stored in the secondary queue for delivery to the primary queue at a later time. If the primary container (namespace) becomes unavailable for some reason, automatic failover enables the messages in the secondary queue. For detailed information about paired namespaces and high availability, see the new topic Asynchronous Messaging Patterns and High Availability. Service Bus: Tooling Improvements In this release, the Windows Azure Tools for Visual Studio contain several enhancements and changes to the management of Service Bus messaging entities using Visual Studio’s Server Explorer. The most noticeable change is that the Service Bus node is now integrated into the Windows Azure node, and supports integrated subscription management. Additionally, there has been a change to the code generated by the Windows Azure Worker Role with Service Bus Queue project template. This code now uses an event-driven “message pump” programming model using the QueueClient.OnMessage method. PowerShell: Tons of New Automation Commands Since my last blog post on the previous Windows Azure SDK 2.0 release, we’ve updated Windows Azure PowerShell (which is a separate download) five times. You can find the full change log here. We’ve added new cmdlets in the following areas: China instance and Windows Azure Pack support Environment Configuration VMs Cloud Services Web Sites Storage SQL Azure Service Bus China Instance and Windows Azure Pack We now support the following cmdlets for the China instance and Windows Azure Pack, respectively: China Instance: Web Sites, Service Bus, Storage, Cloud Service, VMs, Network Windows Azure Pack: Web Sites, Service Bus We will have full cmdlet support for these two Windows Azure environments in PowerShell in the near future. Virtual Machines: Stop/Start Virtual Machines Similar to the Start/Stop VM capability in VS Server Explorer, you can now stop your VM and suspend billing: If you want to keep the original behavior of keeping your stopped VM provisioned, you can pass in the -StayProvisioned switch parameter. Virtual Machines: VM endpoint ACLs We’ve added and updated a bunch of cmdlets for you to configure fine-grained network ACL on your VM endpoints. You can use the following cmdlets to create ACL config and apply them to a VM endpoint: New-AzureAclConfig Get-AzureAclConfig Set-AzureAclConfig Remove-AzureAclConfig Add-AzureEndpoint -ACL Set-AzureEndpoint –ACL The following example shows how to add an ACL rule to an existing endpoint of a VM. Other improvements for Virtual Machine management includes Added -NoWinRMEndpoint parameter to New-AzureQuickVM and Add-AzureProvisioningConfig to disable Windows Remote Management Added -DirectServerReturn parameter to Add-AzureEndpoint and Set-AzureEndpoint to enable/disable direct server return Added Set-AzureLoadBalancedEndpoint cmdlet to modify load balanced endpoints Cloud Services: Remote Desktop and Diagnostics Remote Desktop and Diagnostics are popular debugging options for Cloud Services. We’ve introduced cmdlets to help you configure these two Cloud Service extensions from Windows Azure PowerShell. Windows Azure Cloud Services Remote Desktop extension: New-AzureServiceRemoteDesktopExtensionConfig Get-AzureServiceRemoteDesktopExtension Set-AzureServiceRemoteDesktopExtension Remove-AzureServiceRemoteDesktopExtension Windows Azure Cloud Services Diagnostics extension New-AzureServiceDiagnosticsExtensionConfig Get-AzureServiceDiagnosticsExtension Set-AzureServiceDiagnosticsExtension Remove-AzureServiceDiagnosticsExtension The following example shows how to enable Remote Desktop for a Cloud Service. Web Sites: Diagnostics With our last SDK update, we introduced the Get-AzureWebsiteLog –Tail cmdlet to get the log streaming of your Web Sites. Recently, we’ve also added cmdlets to configure Web Site application diagnostics: Enable-AzureWebsiteApplicationDiagnostic Disable-AzureWebsiteApplicationDiagnostic The following 2 examples show how to enable application diagnostics to the file system and a Windows Azure Storage Table: SQL Database Previously, you had to know the SQL Database server admin username and password if you want to manage the database in that SQL Database server. Recently, we’ve made the experience much easier by not requiring the admin credential if the database server is in your subscription. So you can simply specify the -ServerName parameter to tell Windows Azure PowerShell which server you want to use for the following cmdlets. Get-AzureSqlDatabase New-AzureSqlDatabase Remove-AzureSqlDatabase Set-AzureSqlDatabase We’ve also added a -AllowAllAzureServices parameter to New-AzureSqlDatabaseServerFirewallRule so that you can easily add a firewall rule to whitelist all Windows Azure IP addresses. Besides the above experience improvements, we’ve also added cmdlets get the database server quota and set the database service objective. Check out the following cmdlets for details. Get-AzureSqlDatabaseServerQuota Get-AzureSqlDatabaseServiceObjective Set-AzureSqlDatabase –ServiceObjective Storage and Service Bus Other new cmdlets include Storage: CRUD cmdlets for Azure Tables and Queues Service Bus: Cmdlets for managing authorization rules on your Service Bus Namespace, Queue, Topic, Relay and NotificationHub Summary Today’s release includes a bunch of great features that enable you to build even better cloud solutions.  All the above features/enhancements are shipped and available to use immediately as part of the 2.1 release of the Windows Azure SDK for .NET. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today.  Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• Configuring external SMTP server on Azure VM - messages staying in queue

  - by Steph Locke

  I have an external SMTP provider: auth.smtp.1and1.co.uk I am trying to send SQL Server Reporting Services emails via this on an Windows 2012 Azure VM. It is configured sufficiently correctly for emails to be generated, but I've not configured something or mis-configured something as the emails then stay in the queue. Setup details Configured SMTP Virtual Server General: IP Address: Fixed value Access: Access Control: Authentication: ticked Anonymous access Access: Connection Control: All except the list below (which is empty) Access: relay restrictions: Only the list below (which contains 127.0.0.1), ticked 'allow all..' option Delivery: Outbound Security...:Basic Authentication with username and password completed, ticked TLS encryption Delivery: Outbound connections...:TCP port=587 Delivery: Advanced: FQDN=ServerName, smarthost=auth.smtp.1and1.co.uk I then set the following SSRS rsreportserver.config values: <SMTPServer>100.92.192.3</SMTPServer> <SendUsing>2</SendUsing> <SMTPServerPickupDirectory> c:\inetpub\mailroot\pickup </SMTPServerPickupDirectory> <From>[email protected]</From> Tried so far 1) turning the smtp service off and on again (just in case) 2) run SMTPDiag with no errors (also no emails) 3) tried turning off the firewall for the ports (and more generally to see if it made a difference) 4) tried generation from powershell which resulted with message in queue 5) added 25 and 857 as endpoint 6) perused the event log and found some warnings that appear to be about the recipient Message delivery to the remote domain 'gmail.com' failed for the following reason: Unable to bind to the destination server in DNS. Message delivery to the host '212.227.15.179' failed while delivering to the remote domain 'gmail.com' for the following reason: The remote server did not respond to a connection attempt. 7) tried pinging but this appears to be blocked on azure 8) tried more powershell sending on different domains variants (localhost, boxname, internal ip used in smtp properties, 127.0.0.1) - none resulting in success 9) tried adding a remote domain - no change Could anyone recommend what step 10 should be in fixing this issue please?

  Read the article

• How do I disable MEDIUM and WEAK/LOW strength ciphers in Apache + mod_ssl?

  - by superwormy

  A PCI Compliance scan has suggested that we disable Apache's MEDIUM and LOW/WEAK strength ciphers for security. Can someone tell me how to disable these ciphers? Apache v2.2.14 mod_ssl v2.2.14 This is what they've told us: Synopsis : The remote service supports the use of medium strength SSL ciphers. Description : The remote host supports the use of SSL ciphers that offer medium strength encryption, which we currently regard as those with key lengths at least 56 bits and less than 112 bits. Solution: Reconfigure the affected application if possible to avoid use of medium strength ciphers. Risk Factor: Medium / CVSS Base Score : 5.0 (CVSS2#AV:N/AC:L/Au:N/C:P/I:N/A:N) [More] Synopsis : The remote service supports the use of weak SSL ciphers. Description : The remote host supports the use of SSL ciphers that offer either weak encryption or no encryption at all. See also : http://www.openssl.org/docs/apps/ciphers .html Solution: Reconfigure the affected application if possible to avoid use of weak ciphers. Risk Factor: Medium / CVSS Base Score : 5.0 (CVSS2#AV:N/AC:L/Au:N/C:P/I:N/A:N) [More]

  Read the article

• SIP and NAT routers?

  - by OverTheRainbow

  Hello SIP was not built with NAT routers in mind, and I'd like to get to the bottom of this issue to check what needs to be done on all devices so it works with NAT routers, and understand in what context it just can't be used and I should check more NAT-friendly alternatives like IAX. A picture being worth a thousand words, here's the layout I need to use: http://img62.imageshack.us/img62/4077/sipandnatrouters.jpg The PBX server is located in the private LAN behind a NAT router connected to the Internet (I know it'd be easier if it were located in the public network, but this router doesn't support DMZ's so the server has to be in the private network) A couple of (soft|hard)phones are located on the same LAN and connected to the PBX server, along with a PSTN gateway (Linksys 3102 or a Digium PCI card) Remote users using (soft|hard)phones are located somewhere on the Net with dynamic IP's and are also located behind NAT routers I may or may not have control over the local NAT router where the PBX server is located, but I have no control over the remote NAT routers, either because the users don't have the computer knowledge to map ports or because the routers are off-limit (eg. web cafés, hotel LAN's, etc.) Is it possible to configure the PBX server, the (soft|hard)phones, and the PSTN gateway so that the all conversations work fine, no matter the endpoints (POTS caller/local phone, POTS caller/remote phone, local phones, remote phone/local phone)? In which cases may I expect problems, and are there solutions? FWIW, I'm leaning toward using Freeswitch, but I could end up using Asterisk if there are technical advantages to it in this context. Thank you for any info.

  Read the article

• SQL server queries are really slow only on first run

  - by JoelFan

  Somewhat strange problem... when I start my .NET app for the first time after rebooting my machine, the SQL Server queries are really slow... when I pause the debugger, I notice that it's hanging on getting the response from the query. This only happens when connecting to a remote SQL server (2008)... if I connect to one on my local machine, it's fine. Also, if I restart the app, it works fast, even off the remote SQL server, and subsequent runs are also fine. The only problem is when I connect to a remote SQL server for the first time after rebooting my machine. What's more, I have even noticed this same exact behavior with a 3rd party app (also .NET) that also connects to a remote SQL server. Another piece of info... this has only started hapenning since I upgraded my machine from XP to Win7 (64 bit). Also, other developers on my team who upgraded to Win7 are seeing the same behavior (both with the app we're developing and the 3rd party .NET app). (copied from http://stackoverflow.com/questions/2014814/sql-server-queries-are-really-slow-only-on-first-run )

  Read the article

• RRAS VPN on windows 2k3 AD, can access rras server only.

  - by nopsax

  I'm setting up a test lab and here is the current configuration: 192.168.86.201 - a windows 2003 machine acting as PDC with AD/DNS/DHCP/WINS. 192.168.86.62 - windows 2003 machine is the RRAS server with IAS, also a file/print server. 192.168.86.6 - gateway/router to internet 192.168.86.21 - Windows XP Workstation Everything works on the internal network, File/Print/AD etc. Whenever a user connects via vpn to the RRAS server remotely using their domain credentials, they are assigned an ip address from the 192.168.86.201 machine along with the wins server address etc. The vpn user can then ping/access resources on the RRAS server, but cannot ping/access resources of any other machines by name or ip. However, if I ping by name, it does resolve to the correct ip address, just no replies. I did notice that on the RRAS server the 'internal' interface gets an ip address of 192.168.86.75 when a remote user connects, and the remote user is assigned, for example 192.168.86.71 . The RRAS server responds on both the .62 and .75 ip addresses. The client also unchecks the 'use remote default gateway option'. Also, I tried connecting a laptop to the physical network, joining the domain, then going remote and dialing the connection before domain login, and everything seems to work, e.g. browse-able shares via network neighborhood. But I can't really join the domain remotely if I cannot access any other resources. I really need to monitor traffic to see whats happening to those packets but won't be able to until this weekend. Any help is appreciated, will provide whatever configurations are needed.

  Read the article

• Windows RDP cannot connect to x64 server from XP SP3+ [closed]

  - by Tom

  Hi all, I have a strange problem that I can't seem to find the answer to anywhere online. The issue has to do with using Windows RDP to connect to our servers. Here is what works: -XP/Vista client (any SPs) connecting to 32-bit Server 2003 machine -XP (SP2 and lower) client conecting to 64-bit Server 2003 machine Here is what does not work: - XP SP3+/Vista client connecting to 64-bit Server 2003 machine It appears that the issue is that XP SP3 and Vista clients cannot connect to x64 Server 2003 boxes. After entering the username/password, we get an error message saying the below, and the connection drops: To log on to this remote computer, you must have Terminal Server User Access persmissions on this computer. By default, members of the Remote Desktop Users group have these permissions. If you are not a member of the Remote Desktop Users group or another group that has these persmissions, or if the Remote Desktop User group does not have these permissions, you must be granted these permissions manually. The issue is that the user is a member of the Administrators group, which has permission. Also, logging in using the same username, but from an XP SP2 machine, has no problems at all. I hope I explained this well enough, and any help/insight that can be given would be greatly appreciated. Thanks, Tom

  Read the article

• Windows RDP cannot connect to x64 server from XP SP3+

  - by Tom

  Hi all, I have a strange problem that I can't seem to find the answer to anywhere online. The issue has to do with using Windows RDP to connect to our servers. Here is what works: -XP/Vista client (any SPs) connecting to 32-bit Server 2003 machine -XP (SP2 and lower) client conecting to 64-bit Server 2003 machine Here is what does not work: - XP SP3+/Vista client connecting to 64-bit Server 2003 machine It appears that the issue is that XP SP3 and Vista clients cannot connect to x64 Server 2003 boxes. After entering the username/password, we get an error message saying the below, and the connection drops: To log on to this remote computer, you must have Terminal Server User Access persmissions on this computer. By default, members of the Remote Desktop Users group have these permissions. If you are not a member of the Remote Desktop Users group or another group that has these persmissions, or if the Remote Desktop User group does not have these permissions, you must be granted these permissions manually. The issue is that the user is a member of the Administrators group, which has permission. Also, logging in using the same username, but from an XP SP2 machine, has no problems at all. I hope I explained this well enough, and any help/insight that can be given would be greatly appreciated. Thanks, Tom

  Read the article

• ASP.NET sending email through exchange problem

  - by Solmead

  I have an exchange 2010 server running on Windows 2008 R2, I also have a remote webserver running Windows 2003 with multiple sites on it (all asp.net mvc 2 sites). I setup a Transport in exchange and all the websites on my remote web server can send email no problem to anyone in the exchange server and to any external domain. Now for my problem. I am having issues with that webserver, so I moved one of the websites to run on my exchange server, it runs well (low hit website) except that email doesn't work from that site. I tried changing the Transport in exchange to add the IP address of the local machine and the 127.0.0.1 addresses and it still isn't sending any email. Any ideas on how to get this working? The remote websites can still send email no problem, the version of the site that I had to move on the remote server can still email, but on the exchange server for that website email does not send. I would guess it is a Transport issue, since it is running on the same server a firewall shouldn't be the issue. I changed the smtp setting in web.config to localhost, and now I do receive email to my account on the exchange server, but I do not receive any emails on outside addresses. To add more description, this is a custom developed asp.net mvc 2 website. And no errors were being generated in the code when sending the email in either case.

  Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >