Search Results

Search found 15872 results on 635 pages for 'safe remove'.

Page 124/635 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

  • Elisp performance on Windows and Linux

    - by JasonFruit
    I have the following dead simple elisp functions; the first removes the fill breaks from the current paragraph, and the second loops through the current document applying the first to each paragraph in turn, in effect removing all single line-breaks from the document. It runs fast on my low-spec Puppy Linux box using emacs 22.3 (10 seconds for 600 pages of Thomas Aquinas), but when I go to a powerful Windows XP machine with emacs 21.3, it takes almost an hour to do the same document. What can I do to make it run as well on the Windows machine with emacs 21.3? (defun remove-line-breaks () "Remove line endings in a paragraph." (interactive) (let ((fill-column 90002000)) (fill-paragraph nil))) : (defun remove-all-line-breaks () "Remove all single line-breaks in a document" (interactive) (while (not (= (point) (buffer-end 1))) (remove-line-breaks) (next-line 1))) Forgive my poor elisp; I'm having great fun learning Lisp and starting to use the power of emacs, but I'm new to it yet.

    Read the article

  • Erlang code critique

    - by dagda1
    Hi, I am trying to get my head round some basic erlang functionality and I could do with some comments on the following. I have the following erlang code that takes a list of tuples and returns a list minus an element if a key is found: delete(Key, Database) -> remove(Database, Key, []). remove([], Key, Acc) -> Acc; remove([H|T], Key, Acc) -> if element(1, H) /= Key -> [H| remove(T, Key, Acc)]; true -> remove(T, Key, Acc) end. Is this a good way of doing this? The if statement seems incorrect. Also is my use of the accumulator Acc making this tail recursive? Cheers Paul

    Read the article

  • Lua : Dynamicly calling a function with arguments.

    - by Tipx
    Using Lua, I'm trying to dynamicly call a function with parameters. What I want to have it done is I send a string to be parsed in a way that : 1st argument is a class instance "Handle" 2nd is the function to be called All that is left are arguments "modules" is a a table like { string= } split() is a simple parser that returns a table with indexed strings function Dynamic(msg) local args = split(msg, " ") module = args[1] table.remove(args, 1) if module then module = modules[module] command = args[1] table.remove(args, 1) if command then if not args then module[command]() else module[command](unpack(args)) -- Reference 1 end else -- Function doesnt exist end else -- Module doesnt exist end end When I try this with "ignore remove bob", by "Reference 1", it tries to call "remove" on the instance associated with "ignore" in modules, and gives the argument "bob", contained in a table (with a single value). However, on the other side of the call, the remove function does not receive the argument. I even tried to replace the "Reference 1" line with module[command]("bob") but I get the same result.

    Read the article

  • sorting dynamic table created by form inputs [migrated]

    - by mille
    i am having problems with sorting can someone help to sort this table not just by its form entry id but onclick with some other columns i tried a lot of plugins but cant get anything to work and i dont know what to do i am new at this i sorry for my english thanks. here is the js: var Animals ={ index: window.localStorage.getItem("Animals:index"), $table: document.getElementById("animals-table"), $form: document.getElementById("animals-form"), $button_save: document.getElementById("animals-save"), $button_discard: document.getElementById("animals-discard"), init: function() { if (!Animals.index) { window.localStorage.setItem("Animals:index", Animals.index = 1); } Animals.$form.reset(); Animals.$button_discard.addEventListener("click", function(event) { Animals.$form.reset(); Animals.$form.id_entry.value = 0; }, true); Animals.$form.addEventListener("submit", function(event) { var entry = { id: parseInt(this.id_entry.value), animal_id:this.animal_id.value, animal_name: this.animal_name.value, animal_type: this.animal_type.value, bday: this.bday.value, animal_sex: this.animal_sex.value, mother_name: this.mother_name.value, farm_name: this.farm_name.value, money: this.money.value, weight: this.weight.value, purchase_partner: this.purchase_partner.value }; if (entry.id === 0) { Animals.storeAdd(entry); Animals.tableAdd(entry); } else { // edit Animals.storeEdit(entry); Animals.tableEdit(entry); } this.reset(); this.id_entry.value = 0; event.preventDefault(); }, true); if (window.localStorage.length - 1) { var animals_list = [], i, key; for (i = 0; i < window.localStorage.length; i++) { key = window.localStorage.key(i); if (/Animals:\d+/.test(key)) { animals_list.push(JSON.parse(window.localStorage.getItem(key))); } } if (animals_list.length) { animals_list.sort(function(a, b) {return a.id < b.id ? -1 : (a.id > b.id ? 1 : 0);}) .forEach(Animals.tableAdd);} Animals.$table.addEventListener("click", function(event) { var op = event.target.getAttribute("data-op"); if (/edit|remove/.test(op)) { var entry = JSON.parse(window.localStorage.getItem("Animals:"+ event.target.getAttribute("data- id"))); if (op == "edit") { Animals.$form.id_entry.value = entry.id; Animals.$form.animal_id.value = entry.animal_id; Animals.$form.animal_name.value = entry.animal_name; Animals.$form.animal_type.value = entry.animal_type; Animals.$form.bday.value = entry.bday; Animals.$form.animal_sex.value = entry.animal_sex; Animals.$form.mother_name.value = entry.mother_name; Animals.$form.farm_name.value = entry.farm_name; Animals.$form.money.value = entry.money; Animals.$form.weight.value = entry.weight; Animals.$form.purchase_partner.value = entry.purchase_partner; } else if (op == "remove") { if (confirm('Are you sure you want to remove this animal from your list?' )) { Animals.storeRemove(entry); Animals.tableRemove(entry); } } event.preventDefault(); } }, true); }, storeAdd: function(entry) { entry.id = Animals.index; window.localStorage.setItem("Animals:index", ++Animals.index); window.localStorage.setItem("Animals:"+ entry.id, JSON.stringify(entry)); }, storeEdit: function(entry) { window.localStorage.setItem("Animals:"+ entry.id, JSON.stringify(entry)); }, storeRemove: function(entry) { window.localStorage.removeItem("Animals:"+ entry.id); }, tableAdd: function(entry) { var $tr = document.createElement("tr"), $td, key; for (key in entry) { if (entry.hasOwnProperty(key)) { $td = document.createElement("td"); $td.appendChild(document.createTextNode(entry[key])); $tr.appendChild($td); } } $td = document.createElement("td"); $td.innerHTML = '<a data-op="edit" data-id="'+ entry.id +'">Edit</a> | <a data-op="remove" data-id="'+ entry.id +'">Remove</a>'; $tr.appendChild($td); $tr.setAttribute("id", "entry-"+ entry.id); Animals.$table.appendChild($tr); }, tableEdit: function(entry) { var $tr = document.getElementById("entry-"+ entry.id), $td, key; $tr.innerHTML = ""; for (key in entry) { if (entry.hasOwnProperty(key)) { $td = document.createElement("td"); $td.appendChild(document.createTextNode(entry[key])); $tr.appendChild($td); } } $td = document.createElement("td"); $td.innerHTML = '<a data-op="edit" data-id="'+ entry.id +'">Edit</a> | <a data-op="remove" data-id="'+ entry.id +'">Remove</a>'; $tr.appendChild($td); }, tableRemove: function(entry) { Animals.$table.removeChild(document.getElementById("entry-"+ entry.id)); } }; Animals.init();

    Read the article

  • Lua : Dynamically calling a function with arguments.

    - by Tipx
    Using Lua, I'm trying to dynamically call a function with parameters. I want to send a string to be parsed in a way that: 1st argument is a class instance "Handle" 2nd is the function to be called All that is left are arguments "modules" is a a table like { string=<instance of a class> } split() is a simple parser that returns a table with indexed strings. function Dynamic(msg) local args = split(msg, " ") module = args[1] table.remove(args, 1) if module then module = modules[module] command = args[1] table.remove(args, 1) if command then if not args then module[command]() else module[command](unpack(args)) -- Reference 1 end else -- Function doesnt exist end else -- Module doesnt exist end end When I try this with "ignore remove bob", by "Reference 1", it tries to call "remove" on the instance associated with "ignore" in modules, and gives the argument "bob", contained in a table (with a single value). However, on the other side of the call, the remove function does not receive the argument. I even tried to replace the "Reference 1" line with module[command]("bob") but I get the same result.

    Read the article

  • Handling missing/incomplete data in R

    - by doug
    As you would expect from a DSL aimed at data analysts, R handles missing/incomplete data very well, for instance: Many R functions have an 'na.rm' flag that you can set to 'T' to remove the NAs, but if you want to deal with this before the function call, then: to replace each 'NA' w/ 0: ifelse(is.na(vx), 0, vx) to remove each 'NA': vx = vx[!is.na(a)] to remove entire each row that contains 'NA' from a data frame: dfx = dfx[complete.cases(dfx),] All of these functions remove 'NA' or rows with an 'NA' in them. Sometimes this isn't quite what you want though--making an 'NA'-excised copy of the data frame might be necessary for the next step in the workflow but in subsequent steps you often want those rows back (e.g., to calculate a column-wise statistic for a column that has missing rows caused by a prior call to 'complete cases' yet that column has no 'NA' values in it). to be as clear as possible about what i'm looking for: python/numpy has a class, 'masked array', with a 'mask' method, which lets you conceal--but not remove--NAs during a function call. Is there an analogous function in R?

    Read the article

  • C++ String manipulation isn't making sense to me...

    - by Andrew Bolster
    I am trying some of the Stanford SEE courses online to learn some new languages; this particular assignment has to do with removing substrings from strings. What I've got so far is below, but if text = "hello hello" and remove ="el", it gets stuck in a loop, but if i change text to text = "hello hllo", it works, making me think I'm doing something obviously stupid. There is a stipulation in the assignment not to modify the incoming strings, and instead to return a new string. string CensorString1(string text, string remove){ string returned; size_t found=0, lastfound=0; found = (text.substr(lastfound,text.size())).find(remove); while (string::npos != found ){ returned += text.substr(lastfound,found); lastfound = found + remove.size(); found = (text.substr(lastfound,text.size())).find(remove); } returned += text.substr(lastfound,found); return returned; } Guidance would be appreciated :-) Thanks

    Read the article

  • Subtracting Delphi Time Ranges from a Date Range, Calculate Remaining Time

    - by Anagoge
    I'm looking for an algorithm that will help calculate a workday working time length. It would have an input date range and then allow subtracting partially or completely intersecting time range slices from that date range and the result would be the number of minutes (or the fraction/multiple of a day) left in the original date range, after subtracting out the various non-working time slices. For Example: Input date range: 1/4/2010 11:21 am - 1/5/2010 3:00 pm Subtract out any partially or completely intersecting slices like this: Remove all day Sunday Non-Sundays remove 11:00 - 12:00 Non-Sundays remove time after 5:00 pm Non-Sundays remove time before 8:00 am Non-Sundays remove time 9:15 - 9:30 am Output: # of minutes left in the input date range I don't need anything overly-general. I could hardcode the rules to simplify the code. If anyone knows of sample code or a library/function somewhere, or has some pseudo-code ideas, I'd love something to start with. I didn't see anything in DateUtils, for example. Even a basic function that calculates the number of minutes of overlap in two date ranges to subtract out would be a good start.

    Read the article

  • Best practice to avoid InvalidOperationException: Collection was modified?

    - by Roflcoptr
    Very often I need something like that: foreach (Line line in lines) { if (line.FullfilsCertainConditions()) { lines.Remove(line) } } This does not work, because I always get a InvalidOperationException because the Enumerator was changed during the loop. So I changed all my loops of this kind to the following: List<Line> remove = new List<Line>(); foreach (Line line in lines) { if (line.FullfilsCertainConditions()) { remove.Add(line) } } foreach (Line line in remove) { { lines.Remove(line); } I'm not sure if this is really the best way since in the worst case I have to iterate 2 times over the original list and so it needs time 2n instead of n. Is there a better way to do this?

    Read the article

  • How to define an angular directive inside an angular directive's link function?

    - by user2316667
    I want to create an angular directive inside of a link function, however; the directive created is not able to be compiled. See this JSFiddle: http://jsfiddle.net/v47uvsj5/5/ Uncommenting this directive in the global space works as expected. app.directive('test', function () { return { templateUrl: 'myform', // wraps script tag with id 'myform' restrict: 'E', require: "^mydir", replace: true, scope: { }, link: function (scope, element, attrs, mydirCtrl) { scope.remove = function () { element.remove(); mydirCtrl.remove(); } } } }); But the exact same code inside the link function fails. The reason I want to do this is because I want the user (who is going to be myself) to be able to provide only a script tag's id via an id attribute to my main directive which will in turn create a 'wrapper' directive with a 'remove' method. This way, in the script tag, all one needs to do is implement the 'remove'.

    Read the article

  • Windows Azure PowerShell for Node.js

    - by shiju
    The Windows Azure PowerShell for Node.js is a command-line tool that  allows the Node developers to build and deploy Node.js apps in Windows Azure using Windows PowerShell cmdlets. Using Windows Azure PowerShell for Node.js, you can develop, test, deploy and manage Node based hosted service in Windows Azure. For getting the PowerShell for Node.js, click All Programs, Windows Azure SDK Node.js and run  Windows Azure PowerShell for Node.js, as Administrator. The followings are the few PowerShell cmdlets that lets you to work with Node.js apps in Windows Azure Create New Hosted Service New-AzureService <HostedServiceName> The below cmdlet will created a Windows Aazure hosted service named NodeOnAzure in the folder C:\nodejs and this will also create ServiceConfiguration.Cloud.cscfg, ServiceConfiguration.Local.cscfg and ServiceDefinition.csdef and deploymentSettings.json files for the hosted service. PS C:\nodejs> New-AzureService NodeOnAzure The below picture shows the files after creating the hosted service Create Web Role Add-AzureNodeWebRole <RoleName> The following cmdlet will create a hosted service named MyNodeApp along with web.config file. PS C:\nodejs\NodeOnAzure> Add-AzureNodeWebRole MyNodeApp The below picture shows the files after creating the web role app. Install Node Module npm install <NodeModule> The following command will install Node Module Express onto your web role app. PS C:\nodejs\NodeOnAzure\MyNodeApp> npm install Express Run Windows Azure Apps Locally in the Emulator Start-AzureEmulator -launch The following cmdlet will create a local package and run Windows Azure app locally in the emulator PS C:\nodejs\NodeOnAzure\MyNodeApp> Start-AzureEmulator -launch Stop Windows Azure Emulator Stop-AzureEmulator The following cmdlet will stop your Windows Azure in the emulator. PS C:\nodejs\NodeOnAzure\MyNodeApp> Stop-AzureEmulator Download Windows Azure Publishing Settings Get-AzurePublishSettings The following cmdlet will redirect to Windows Azure portal where we can download Windows Azure publish settings PS C:\nodejs\NodeOnAzure\MyNodeApp> Get-AzurePublishSettings Import Windows Azure Publishing Settings Import-AzurePublishSettings <Location of .publishSettings file> The following cmdlet will import the publish settings file from the location c:\nodejs PS C:\nodejs\NodeOnAzure\MyNodeApp>  Import-AzurePublishSettings c:\nodejs\shijuvar.publishSettings Publish Apps to Windows Azure Publish-AzureService –name <Name> –location <Location of Data centre> The following cmdlet will publish the app to Windows Azure with name “NodeOnAzure” in the location Southeast Asia. Please keep in mind that the service name should be unique. PS C:\nodejs\NodeOnAzure\MyNodeApp> Publish-AzureService –name NodeonAzure –location "Southeast Asia” –launch Stop Windows Azure Service Stop-AzureService The following cmdlet will stop your service which you have deployed previously. PS C:\nodejs\NodeOnAzure\MyNodeApp> Stop-AzureService Remove Windows Azure Service Remove-AzureService The following cmdlet will remove your service from Windows Azure. PS C:\nodejs\NodeOnAzure\MyNodeApp> Remove-AzureService Quick Summary for PowerShell cmdlets Create  a new Hosted Service New-AzureService <HostedServiceName> Create a Web Role Add-AzureNodeWebRole <RoleName> Install Node Module npm install <NodeModule> Running Windows Azure Apps Locally in Emulator Start-AzureEmulator -launch Stop Windows Azure Emulator Stop-AzureEmulator Download Windows Azure Publishing Settings Get-AzurePublishSettings Import Windows Azure Publishing Settings Import-AzurePublishSettings <Location of .publishSettings file> Publish Apps to Windows Azure Publish-AzureService –name <Name> –location <Location of Data centre> Stop Windows Azure Service Stop-AzureService Remove Windows Azure Service Remove-AzureService

    Read the article

  • A Forming Repository of Script Samples for Automating Windows Server 2012 and Windows 8

    - by Jialiang
    Compared with Windows Server 2008/R2 that provides about 230 cmdlets, Windows Server 2012 beats that by a factor of over 10 shipping ~ 2,430 cmdlets.  You can automate almost every aspect of the server.   The new PowerShell 3.0, like Windows Server 2012, has a ton of new features.  In this automation script-centric move, Microsoft All-In-One Script Framework (AIOSF) is ready to support IT Pros with many new services and offerings coming this year.  We sincerely hope that the IT community will benefit from the effort. Here is the first one among our new services and offerings:  The team is preparing a large set of Windows 8 / Windows Server 2012 script samples based on frequently asked IT tasks that we collect in TechNet forums and support calls to Microsoft.   Because the script topics come from frequently asked IT tasks, we hope that these script samples can be helpful to many IT Pros worldwide.   With the General Availability of Windows Server 2012, we release the first three Windows Server 2012 / Windows 8 script samples today.    Get Network Adapter Properties in Windows Server 2012 and Windows 8 (PowerShell) http://gallery.technet.microsoft.com/scriptcenter/Get-Network-Adapter-37c5a913 Description: This script could be used to get network adapter properties and advanced properties in Windows Server 2012 and Windows 8. It combines the outputs of Get-NetAdapter and Get-NetAdapterAdvancedProperty. It can generate a report of network adapter configuration settings. Use Scenarios: In a real world, IT Administrators are required to check the configuration of network adapters after the deployment of new servers. One typical example is the duplex setting of network adapters. Also, IT administrators need to maintain a server list which contains network adapter configuration settings in a regular basis. Before Windows Server 2012, IT administrators often feel difficulties to handle these tasks. Acknowledgement: Thanks Greg Gu from AIOSF for collecting this script topic, and writing the script sample.  Thanks James Adams (Microsoft Premier Field Engineer) for reviewing the script sample and ensuring its quality.   How to batch create virtual machines in Windows Server 2012 (PowerShell) http://gallery.technet.microsoft.com/scriptcenter/How-to-batch-create-9efd1811 Description: This PowerShell Script illustrates how to batch create multiple virtual machines based on comma delimited file by using PowerShell 3.0 in Windows Server 2012. Use Scenarios: IT admin requires to batch creating virtual machines in Windows Server 2012, although they can use few commands due to the lack of programming knowledge. Although it’s a set of Hyper-V command-lets within Windows PowerShell, IT Admins are reluctant to use them except simple a command which is widely used. Acknowledgement: Thanks Anders Wang from AIOSF for collecting this script topic and writing the script sample.  Thanks Christopher Norris for reviewing the script sample and ensuring its quality before publishing.   Remove Windows Store Apps in Windows 8 (PowerShell) http://gallery.technet.microsoft.com/scriptcenter/Remove-Windows-Store-Apps-a00ef4a4 Description: This script can be used to remove multiple Windows Store Apps from a user account in Windows 8. It provides a list of installed Windows Store applications. You can specify the application IDs, and remove them all at once. Use Scenarios: 1. In Windows 8, you can remove a single Windows Store App by right-clicking the tile in the Start menu and choosing the uninstall command.  However, no command is provided for removing multiple Windows Store Apps all at once. If you want to do so, you can use this script sample. 2. Sometimes Windows Store Apps may crash in Windows 8.  Even though you can successfully uninstall and reinstall the App, the application may still crash after the reinstallation.  In this situation, you can use this example script to remove these Windows Store Apps cleanly. Acknowledgement: Thanks Edward Qi from AIOSF for collecting the script idea and composing the script sample.  Thanks James Adams (Microsoft Premier Field Engineer) for reviewing the script sample and ensuring its quality.   This is just the beginning, and more and more script samples are coming.  You can follow our blog (http://blogs.technet.com/b/onescript) to get the latest customer-driven script samples for Windows Server 2012 and Windows 8.

    Read the article

  • How to deal with overly aggressive "Link Take Down Demands"?

    - by Eoin
    I've been receiving a large number of emails recently requesting I clean from link spam from my forum. Initially the emails were very polite and professional, and I was happy to remove the links. Recently the email have gotten very abrasive, here is a particularly rude example: From: [email protected] To: [email protected] Hi, This is the second time we are reaching out to you regarding your link to our site hxxp://www.company-two.com from hxxp://www.my-forum.com/some-topic-id. We really do need to remove this link. We have to report to Google any link we were unable to remove, and I wouldn't want to have to include your site in the list. Could you please remove our link from this page and any other page on your site? Thank You, Name Changed Behind the superficial pleasantries I feel there is some very real maliciousness. Note the email address, DMCA Violations, I don't see how the DMCA is involved here, except as a word which tends to strike fear in many people. Also relating to the email address, it doesn't match the company being linked to at all. How am I to trust they are truely operating on behalf of company-two when they don't even use one of it's email addresses. My email is hidden by privacypost. While a service with legitimate uses, I feel it's highly unprofessional for communications between to companies. The claim "This is the second time..." Every email I've received has started like this, but a check of my spam filters has never revealed a 1st mail. Initially I gave them the benefit of the doubt, by now though it's clear this is a cheap ploy to start me off on the defensive. And finally worst of all- the threats of reporting me to Google if I don't do everything they ask. I sent a polite reply asking for more information. I have no idea if the email address was even valid but I never received any response. Much later I got this followup mail From: [email protected] To: [email protected] Hi, This is the final time we are reaching out to you regarding your link to our site hxxp://www.company-two.com from hxxp://www.my-forum.com/some-topic-id. We will soon be reporting to Google any link we were unable to remove, and currently your site will have to be on the list. Could you please remove our link from this page and any other page on your site? I appreciate your urgent attention to this matter. Thank You, Name Changed This time the from address was more personal, though still not obviously connected to the spammed company. Lets be honest, I don't for one second believe that the companies were the victim of a 3rd party spammer as they claim. The links in questions were generated well over a year ago, and I firmly believe the companies were directly responsible for the spam links in question, a type of spam that has plagued my forum. Now they have the audacity to demand I spend my time cleaning up their mess, using threats to ensure they get their way. Have recent changes in Googles algorithms meant all the cash they spent spamming the web has now turned into a liability? If so I can see why these companies are all of a sudden running scared. Frankly, cleaning up my forum is a good things, but the threats they are using sickens me. So my question here is specifically about the threats: Are they vaild, and would such reports to Google destroy my page rankings? Is there a way I can report this abusive behaviour to Google?

    Read the article

  • Migrating Windows XP BOOT.INI Settings to Windows 7 Boot-loader

    - by Synetech inc.
    Two months ago my motherboard died, so I bought a used computer that came with Windows 7. I have since installed my old hard-drive, which had Windows XP on it, in this system. What I am trying to do now is to figure out a way to migrate the settings from XP's BOOT.INI into 7's boot-loader. Below is the BOOT.INI I used in XP (I have reduced the strings and updated the disks to point to the new location of the old HD. Oh and I am not clear on the drive letters. In XP, I could boot the recovery console or MS-DOS from a file in C:\ that contains the boot-sector. I am not sure what drive letter it would be called now—I had to manually change all the drive letters of the old partitions in Windows 7 because it auto-assigned them all wrong/differently). [boot loader] timeout=10 default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP" /fastdetect multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP (Safe)" /safeboot:network /sos /bootlog /noguiboot C:\CMDCONS\BOOTSECT.DAT="Recovery Console" /cmdcons C:\BOOTSECT.DOS="MS-DOS 7.10" /win95 I have looked around, and have only been able to find some bcdedit commands to add XP to the boot-loader, but none that include information on setting safe-mode for it (or changing any of the XP load options for that matter). Not surprisingly I suppose, I have not found anything on adding the XP recovery console or DOS to the Windows 7 boot-loader. (Yes, I tried EasyBCD, but that did not help; it had no options for XP, and the best I managed was to get a choice of booting 7 or normal-mode XP—choosing XP didn't even give the old XP boot menu.) Can anyone please tell me how to export the entries in XP's boot.ini to 7's boot-loader so that on boot, I can choose to load the following: Windows 7 Windows 7 (Safe-mode) (Windows 7 (The Win7 counterpart of the Recovery Console)) Windows XP Windows XP (Safe-mode) Windows XP (Recovery Console) MS-DOS 7.10

    Read the article

  • Migrating Windows XP BOOT.INI Settings to Windows 7 Boot-loader

    - by Synetech inc.
    Hi, Two months ago my motherboard died, so I bought a used computer that came with Windows 7. I have since installed my old hard-drive, which had Windows XP on it, in this system. What I am trying to do now is to figure out a way to migrate the settings from XP's BOOT.INI into 7's boot-loader. Below is the BOOT.INI I used in XP (I have reduced the strings and updated the disks to point to the new location of the old HD. Oh and I am not clear on the drive letters. In XP, I could boot the recovery console or MS-DOS from a file in C:\ that contains the boot-sector. I am not sure what drive letter it would be called now—I had to manually change all the drive letters of the old partitions in Windows 7 because it auto-assigned them all wrong/differently). [boot loader] timeout=10 default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP" /fastdetect multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP (Safe)" /safeboot:network /sos /bootlog /noguiboot C:\CMDCONS\BOOTSECT.DAT="Recovery Console" /cmdcons C:\BOOTSECT.DOS="MS-DOS 7.10" /win95 I have looked around, and have only been able to find some bcdedit commands to add XP to the boot-loader, but none that include information on setting safe-mode for it (or changing any of the XP load options for that matter). Not surprisingly I suppose, I have not found anything on adding the XP recovery console or DOS to the Windows 7 boot-loader. (Yes, I tried EasyBCD, but that did not help; it had no options for XP, and the best I managed was to get a choice of booting 7 or normal-mode XP—choosing XP didn't even give the old XP boot menu.) Can anyone please tell me how to export the entries in XP's boot.ini to 7's boot-loader so that on boot, I can choose to load the following: Windows 7 Windows 7 (Safe-mode) (Windows 7 (The Win7 counterpart of the Recovery Console)) Windows XP Windows XP (Safe-mode) Windows XP (Recovery Console) MS-DOS 7.10

    Read the article

  • Unable to activate Windows XP

    - by Josh Kelley
    The latest round of Patch Tuesday updates left my Windows XP computer unbootable. ("Fatal System Error: The Windows Logon Process system process terminated unexpectedly.") After much messing around with the recovery console, an XP CD's repair mode, and manually copying registry files around, I have a system that can boot again. However, I overwrote my OEM XP installation's activation information while trying to run a retail XP CD's setup, so it needs reactivation. Here's my problem: I cannot activate it at all. I log in, Windows tells me I have to activate to continue, I click Yes, and absolutely nothing happens: no windows, no response to keyboard or mouse, no response to Ctrl-Alt-Del, nothing. Safe mode works, but I can't activate in safe mode (EDIT: not even safe mode with networking). I read a trick online of pressing [Windows Key]+U to bring up the Microsoft Narrator, and that works, but clicking its Microsoft Web Site link does nothing. My last attempt to resolve this was to reinstall Windows off of the OEM CD. Now I have two parallel Windows installations, both on the same hard drive, one with all of my stuff and no way to activate it, one fully activated with no usable programs. Any ideas? Any way to activate in safe mode? Any way to copy activation information from my activated installation to my unactivated installation (since they're both on the same hard drive)?

    Read the article

  • Windows Server 2003 DC hangs after network drivers update

    - by tcv
    Earlier today, we attempted to update the Broadcom BCM5716C network drivers on a Windows Server 2003. (Dell PowerEdge T310, FWIW). Since then we have not been able to boot the server in any normal mode. Safe Mode works. Safe Mode with Networking and regular bootups hang at "Applying Network Settings." I haven't tried Last Known Good Configuration nor have I tried Directory Services Restore Mode. I should also mention that the longest I've allowed "Applying Network Settings" was perhaps 30 minutes. I spoke to Dell since the server is under a basic warranty. They sent me the original Broadcom drivers. The trouble seems to be, however, that since I can only boot in Safe Mode, I can't install the application package as given. In safe mode, I receive the error: "The system administrator has set policies to prohibit this installation." I can install the drivers independently, but that doesn't allow the NICs to work. The most I've been able to get are Code 10 errors on each NIC. I plan to get back to the site tomorrow to attempt installation of a different NIC. I'm wondering what else I can try.

    Read the article

  • How do I restart a Windows XP upgrade?

    - by Jason
    Is there a registry tweek to tell Windows Setup to start over? It tries to continue where it left off after I reboot. I can get to the Recovery Console. I tried to go from SP2-SP3. It failed, and I couldn't get to Safe Mode. I put in the SP1 disk (I don't have an SP2 boot disk, just the upgrade package.) It ran a couple minutes then gave me the error "the signature for windows xp professional upgrade is invalid" error code 800b0100. I rebooted to Safe Mode. I get to Safe Mode then say "Window XP Setup can't run under Safe Mode" press ok to restart. I put the SP3 disk back in, trying to get the "repair" option I didn't ever see putting in the SP1 disk, and it tried to continue the SP1 install - on the 4th step, and then gave the same signature error above. I need to get it to start over, so I can get to the repair option, to go back to SP2 (or install SP1 then add SP2 to it). Is there a registry tweek to tell Windows Setup to start over?

    Read the article

  • Disaster recovery backup of files/photos for personal use

    - by Renesis
    I'm looking for the best method to store a backup of important files and 5+ years of digital photos that is safe from some type of fire/flood disaster in my home. I'm looking for: Affordable: Less than $100/yr or first-time cost. Reliable: At least a smaller chance of failing than there is of fire or flood Easy for initial backup and to add to, and at least semi-easy to recover. I recently purchased a small home safe for physical vitals. It was inexpensive, solid, and is fire/water safe. If I had a physical copy of the digital files, the safe would work fine for this, but I don't know what to store in it that adequately meets the requirements above. Hard drive - I read that the danger of it not spinning up makes a hard drive a bad choice for this type of storage, although it was my first thought and would definitely be the simplest choice - very easy to take out once a month and add files to. DVDs - Way too much of a hassle for both backup and restore. Tape - No idea on the affordability of this option Online - Given that I have at least 300GB already and ever-increasing megapixels means ever-bigger files, and my ISP upload is about 2Mb at the best, this just doesn't sound like a good option for me, but I could be convinced. Other - Have I missed something? Also, I'm already covered both for sync between computers (Dropbox) and a nightly backup of these files (External HDD). The problem with the nightly backup is obviously that it's always with the computer and in a disaster would be destroyed along with it. Is anyone else doing something similar? Is the HDD as poor of a choice as I read, or is it a feasible option? Maybe two to reduce the likelihood of failure?

    Read the article

  • Safely transfer files from pc with internet connection to lan without allowing any other form of communication

    - by Hugh Quenneville
    In the company that I work there are computers that are connected to the Internet and computers that are connected to a Local Area Network. The LAN is considered a "safe zone" and the files that reside there should never be copied/moved to a computer that has Internet Access. So, now, if we want to download an installer for an application for example, we download it in a pc that has Internet Access and then move it using a "secure USB stick" to the Local Area Network. Is there a way to create an "safe, one-way connection" between a computer with Internet access and a computer from the LAN? This practically means that only files from the computer with the Internet access can be copied/moved to the LAN. In addition to that, if you want to transfer files you would have to provide your security credentials for the network (so, that only users with the appropriate access levels will be able to transfer files). Is it possible to create something like that and make it completely safe (or at least "equally safe" with the USB method that we currently use) or the fact that the computer with Internet access is connected with a wire to the LAN is a security risk by itself? NOTE: the LAN setup involves 2 Windows 2003 servers with Active Directory, Web servers and pretty much all the services that you would expect to find in a Windows network.

    Read the article

  • How can I secure my $_GETs in PHP?

    - by ggfan
    My profile.php displays all the user's postings,comments,pictures. If the user wants to delete, it sends the posting's id to the remove.php so it's like remove.php?action=removeposting&posting_id=2. If they want to remove a picture, it's remove.php?action=removepicture&picture_id=1. Using the get data, I do a query to the database to display the info they want to delete and if they want to delete it, they click "yes". So the data is deleted via $POST NOT $GET to prevent cross-site request forgery. My question is how do I make sure the GETs are not some javascript code, sql injection that will mess me up. here is my remove.php //how do I make $action safe? //should I use mysqli_real_escape_string? //use strip_tags()? $action=trim($_GET['action']); if (($action != 'removeposting') && ($action != 'removefriend') && ($action != 'removecomment')) { echo "please don't change the action. go back and refresh"; header("Location: index.php"); exit(); } if ($action == 'removeposting') { //get the info and display it in a form. if user clicks "yes", deletes } if ($action =='removepicture') { //remove pic } I know I can't be 100% safe, but what are some common defenses I can use. EDIT Do this to prevent xss $action=trim($_GET['action']); htmlspecialchars(strip_tags($action)); Then when I am 'recalling' the data back via POST, I would use $posting_id = mysqli_real_escape_string($dbc, trim($_POST['posting_id']));

    Read the article

  • Is there a usage count for packages or programs?

    - by math
    Motivation: I want to remove applications I do not use to speed up my package processing tasks like dist upgrades, regular updates, but also for saving disk space and other reasons. I know this is a complex topic so first I will ask my question and second I will give some answers I already found out. Question: How do I find out which package I did not used at all? For example I always use the VLC so I could remove totem package. (Which I could have been used some day, yes.) Of course package dependencies could force me to have programs installed which I will never use. Notes: Find the packages which consume much space via synaptic: Select "Status" in lower left, select "Installed" in upper left, sort column on "size" in upper right. Then you can decide which big packages you really need. Use aptitude autoremove Use ubuntu-tweak's Janitor for removing old kernel packages, old configs, apt-cache entries, etc. Manually search for applications for a given task that you usually solve with your standard app. E.g. Movie player, Music player, Office program, Browser etc. (BTW: this is what I want to be helped with my question) When removing packages I always favour "apt-get purge" over "aptitude remove --purge" as aptitude often will also remove essential packages due to package dependencies. E.g. when removing "evolution" (as I use thunderbird) aptitude wants to remove also "ubuntu-desktop" and 756 other packages as well, while apt-get just removes evolution and its helping pacakges like evolution-common. Ubuntu lense gives me most recent used applications which are candidates for keeping :) Employ deborphan as I read in this related answer: How do I clean up my harddrive? I should certainly keep essential packages: Keep only essential packages This question is pretty much a duplicate of How to see what installed packages I have never used for cleaning purposes but covering only few aspects. However one answer suggests to use a program called unusedpkg but the link seems down. There is also a program called Kleen http://code.google.com/p/kleen/ but it won't compile in 11.10. However I hacked it to compile but the results are unusable, as for example the g++ package was marked as not used for 203, but actually I used it seconds ago for compiling Kleen itself ;) So don't use this tool. On http://wiki.debian.org/DebianPackageInformation I read the the package popularity-contest will produce log files with usage statistics. Unfortunately I didn't enabled the popularity contest so I can't find this log file.

    Read the article

  • Running sfc /scannow provides the error The specific error code is 0x000006ba [The RPC server is una

    - by leeand00
    I think that my mup.sys file is corrupted, I received the following error when trying to access a network share that was located on my Windows 7 box, from my Windows xp box: No network provider accepted the given network path. After reading this I attempted to follow the directions by entering my computer into safe mode. After I run "sfc /scannow" I receive the following error message: The specific error code is 0x000006ba [The RPC server is unavailable]. Additionally when I go into Services, it says that the Remote Procedure Call (RPC) service is running but that the Remote Procedure Call (RPC) Locator is not running. When I try to start the Remote Procedure Call (RPC) Locator, it gives me an error saying: Error 1084: This service cannot be started in Safe Mode So what can I do about this exactly? If it can't find the Remote Procedure Call service in safe mode?

    Read the article

  • Using Diskpart in a PowerShell script won't allow script to reuse drive letter

    - by Kyle
    I built a script that mounts (attach) a VHD using Diskpart, cleans out some system files and then unmounts (detach) it. It uses a foreach loop and is suppose to clean multiple VHD using the same drive letter. However, after the 1st VHD it fails. I also noticed that when I try to manually attach a VHD with diskpart, diskpart succeeds, the Disk Manager shows the disk with the correct drive letter, but within the same PoSH instance I can not connect (set-location) to that drive. If I do a manual diskpart when I 1st open PoSH I can attach and detach all I want and I get the drive letter every time. Is there something I need to do to reset diskpart in the script? Here's a snippet of the script I'm using. function Mount-VHD { [CmdletBinding()] param ( [Parameter(Position=0,Mandatory=$true,ValueFromPipeline=$false)] [string]$Path, [Parameter(Position=1,Mandatory=$false,ValueFromPipeline=$false)] [string]$DL, [string]$DiskpartScript = "$env:SystemDrive\DiskpartScript.txt", [switch]$Rescan ) begin { function InvokeDiskpart { Diskpart.exe /s $DiskpartScript } ## Validate Operating System Version ## if (Get-WmiObject win32_OperatingSystem -Filter "Version < '6.1'") {throw "The script operation requires at least Windows 7 or Windows Server 2008 R2."} } process{ ## Diskpart Script Content ## Here-String statement purposefully not indented ## @" $(if ($Rescan) {'Rescan'}) Select VDisk File="$Path" `nAttach VDisk Exit "@ | Out-File -FilePath $DiskpartScript -Encoding ASCII -Force InvokeDiskpart Start-Sleep -Seconds 3 @" Select VDisk File="$Path"`nSelect partition 1 `nAssign Letter="$DL" Exit "@ | Out-File -FilePath $DiskpartScript -Encoding ASCII -Force InvokeDiskpart } end { Remove-Item -Path $DiskpartScript -Force ; "" Write-Host "The VHD ""$Path"" has been successfully mounted." ; "" } } function Dismount-VHD { [CmdletBinding()] param ( [Parameter(Position=0,Mandatory=$true,ValueFromPipeline=$false)] [string]$Path, [switch]$Remove, [switch]$NoConfirm, [string]$DiskpartScript = "$env:SystemDrive\DiskpartScript.txt", [switch]$Rescan ) begin { function InvokeDiskpart { Diskpart.exe /s $DiskpartScript } function RemoveVHD { switch ($NoConfirm) { $false { ## Prompt for confirmation to delete the VHD file ## "" ; Write-Warning "Are you sure you want to delete the file ""$Path""?" $Prompt = Read-Host "Type ""YES"" to continue or anything else to break" if ($Prompt -ceq 'YES') { Remove-Item -Path $Path -Force "" ; Write-Host "VHD ""$Path"" deleted!" ; "" } else { "" ; Write-Host "Script terminated without deleting the VHD file." ; "" } } $true { ## Confirmation prompt suppressed ## Remove-Item -Path $Path -Force "" ; Write-Host "VHD ""$Path"" deleted!" ; "" } } } ## Validate Operating System Version ## if (Get-WmiObject win32_OperatingSystem -Filter "Version < '6.1'") {throw "The script operation requires at least Windows 7 or Windows Server 2008 R2."} } process{ ## DiskPart Script Content ## Here-String statement purposefully not indented ## @" $(if ($Rescan) {'Rescan'}) Select VDisk File="$Path"`nDetach VDisk Exit "@ | Out-File -FilePath $DiskpartScript -Encoding ASCII -Force InvokeDiskpart Start-Sleep -Seconds 10 } end { if ($Remove) {RemoveVHD} Remove-Item -Path $DiskpartScript -Force ; "" } }

    Read the article

  • How to boot Snow Leopard without Rebel EFI?

    - by RahulVyas
    I have Mac OSX 10.5.7 on one hdd and I want to install Snow Leopard 10.6 so I attach another hdd, format it with GUID, and then boot my system using free Rebel EFI disc, then I install the Snow Leopard but in the end the setup fails. When I restart the PC and boot using Rebel EFI it shows Snow Leopard installed. So I boot that in safe mode and it started. My problem is I cannot boot it into safe mode because I have Chameleon already installed for 10.5.7 and in the Chameleon I can not see any option to boot into safe mode? So does someone know how do I boot Snow Leopard?

    Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >