Search Results

Search found 7976 results on 320 pages for 'sl dev'.

Page 124/320 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

• Ubuntu 12.04 doesn't detect hard disk partitions

  - by m0skit0

  I just installed Ubuntu 12.04 32-bit on an ASUS Laptop and wanted to install it in another one, the ASUS A55V. After booting the laptop and setting up Windows 7 (I unfortunately cannot wipe out Windows), and creating one extra partition to install Ubuntu there, when I reboot from USB and launch Ubuntu installation, it doesn't recognize any partition on /dev/sda, but shows the whole disk as unpartitioned. I guess this is due to UEFI, but I don't know how I can make Ubuntu see the partitions created by Windows. Or any workaround for this to be able to install Ubuntu on /dev/sda. Thanks in advance

  Read the article

• Running Emacs on Multiple TTYs in screen

  - by Daniel Kessler

  When working with EMACS over SSH, is there any way to spawn a new frame of the same emacs session on a different terminal? In my use case, I have screen running, so I have multiple terminals, and can recover which pseudo terminal they're attached to with pts. Suppose I have two "windows" (in GNU screen parlance). The first one is attached to /dev/pts/12 and the second one is attached to /dev/pts/13. I launch emacs on the first window. Is there any way for me to start a new frame of the same session on the second window? I've been playing with passing arguments to make-frame but it seems that the usage that allows me to specify a terminal requires that a terminal object already exists, and I can't see any way to create a new terminal object.

  Read the article

• Cloning a linux system from sdx to cciss

  - by churnd

  I have an HP ML 310 server running CentOS Linux 5.5. I'm buying a RAID card (LSI 9260-8i) to set up a mirrored OS drive. Right now, the boot drive is set up with GRUB installed on the MBR of /dev/sda & has a 100MB /boot partition for /dev/sda1, then the rest is configured in LVM with a 20GB with a 20GB VG for the root partition & ~80GB VG for home. The new disk sizes will also be slightly larger as well. What is the best way to clone the boot drive to the new CCISS device?

  Read the article

• How do I unmount a charging device in Linux?

  - by PeanutsMonkey

  I have a mobile device attached via USB to a Linux box and wish to unmount it. I ran the command fdisk -l however it does not list a mount point. I then ran the command lsusb which yielded the screenshot below. I then proceeded to search the /dev/disk/by-id directory and was found the following file The file is a symbolic link to what appears to be /dev/sdc Questions Why does it not appear when I run the command fdisk -l? How do I unmount it properly without simply yanking the USB cord from the USB port?

  Read the article

• Overriding Apache auth directive

  - by Machine

  Hi! I'm trying to allow public access to a method that generates a WSDL-file for our API. The rest of the site is behind basic auth protection. Can you guys take a look at the following virtual-host configuration and see why the override does not take place? <VirtualHost *:80> ServerName xyz.mydomain.com DocumentRoot /var/www/dev/public <Directory /var/www/dev/public> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all SetEnv APPLICATION_ENV testing </Directory> <Location /> AuthName "XYZ Development Server" AuthType Basic AuthUserFile /etc/apache2/xyz.passwd Require valid-user </Location> <Location /api/soap/wsdl> Satisfy Any allow from all </Location> </VirtualHost>

  Read the article

• Best Practices in Preventing Locks in File sharing in Windows?

  - by crosenblum

  We have a web development server, that has our source control on it. That we use via mapped drives to open/edit/save/create files on to it. But I have noticed a lot of weird glitches with either the file lock/sharing/etc For example, if i have a file open on my local pc, and try to check out that file via my source control on dev, it error's out. The source control I use is QCVS by Qumasoft. Or If I use cuteftp to download something to dev, via my local pc, it won't download unless I close that file. So my brain sniff's and figures this is either an issue with folder/network/sharing, or an issue of permissions. Has anyone else had similar issues, and what did they do to fix it permanently? Thank you...

  Read the article

• pyexiv2 build error src/exiv2wrapper.hpp:32:29: error: exiv2/preview.hpp: No such file or directory

  - by Jake

  The other day I used apt-get install python-pyexiv2 on my ubuntu server, but it seems to have given me an old version. It's not compatible with the code I wrote in my local development environment so I'd like to update it. I downloaded the latest tar.gz from the website, extracted it and ran scons as per the readme. But it will not build, I get the error src/exiv2wrapper.hpp:32:29: error: exiv2/preview.hpp: No such file or directory I've also user apt-get to install libboost-python-dev and libexiv2-dev Can anyone help me on this?

  Read the article

• Poppler installation

  - by Menopia

  I downloaded the new poppler 0.15 tar ball and i built it from source successfully but when trying dpkg -l | grep poppler it outputs ii libpoppler-dev 0.14.3-0ubuntu1.1 PDF rendering library -- development files ii libpoppler-glib-dev 0.14.3-0ubuntu1.1 PDF rendering library -- development files (GLib interface) ii libpoppler-glib4 0.12.4-1ubuntu1 PDF rendering library (GLib-based shared library) ii libpoppler-glib5 0.14.3-0ubuntu1.1 PDF rendering library (GLib-based shared library) ii libpoppler5 0.12.4-1ubuntu1 PDF rendering library rc libpoppler6 0.14.2.is.0.14.1-0ubuntu1 PDF rendering library ii libpoppler7 0.14.3-0ubuntu1.1 PDF rendering library ii poppler-utils 0.14.3-0ubuntu1.1 PDF utilitites (based on libpoppler) So AFAIK this means that the new version is not installed !!

  Read the article

• Resize PV on LVM

  - by Paul Tarjan

  I have this: Device Boot Start End Blocks Id System /dev/sda1 * 1 1217 9775552 83 Linux /dev/sda2 1218 60801 478608480 83 Linux And I'd like to shrink sda2 by about 10 Gigs to give some more space to sda1. sda2 is a PV on an LVM, but there is some free space in the VG so I don't have to worry about filesystem shrinking. How can I tell my LVM to move the data off of the first 10 gigs of sda2 and then redo my partition table to give it to sda1? (I don't have enough free space to just pvremove sda2, which would be the easy solution).

  Read the article

• How can browsers in VMs resolve hostnames of websites on parent PC?

  - by elliot100

  I have a number of local websites in development on my Windows PC, set up as virtual hosts within Apache, with hostnames (along the lines of dev.example.com) resolved via the hosts file, so I can test them out them with various browsers. I now want to extend browser testing to running browsers in various OSs in virtual machines, and want to be able to resolve dev.example.com from the VMs. Currently these are a mix of VMWare Server and VirtualPC. I know I can edit the hosts file on any Windows VMs, but this is a bit fiddly and I'd like a solution which is independent of the individual VMs. I think what I need is a nameserver, but what's the simplest way of going about this? I'd like everything to be self-contained on the one machine. I think I can cover firewall and Apache permissioning issues.

  Read the article

• compressing dd backup on the fly

  - by Phil

  Maybe this will sound like dumb question but the way i'm trying to do it doesn't work. I'm on livecd, drive is unmounted, etc. When i do backup this way sudo dd if=/dev/sda2 of=/media/disk/sda2-backup-10august09.ext3 bs=64k ...normally it would work but i don't have enough space on external hd i'm copying to (it ALMOST fits into it). So I wanted to compress this way sudo dd if=/dev/sda2 | gzip > /media/disk/sda2-backup-10august09.gz ...but i got permissions denied. I don't understand.

  Read the article

• Custom grub config hangs at the prompt

  - by drecute

  Please I need help with this custom grub: default=0 timeout=20 fallback=1 title Remote Install root (hd0,0) kernel /vmlinuz_remote lang=en_US keymap=us ks=nfs:192.168.128.42:/tftpboot/Kickstart/ks.cfg ksdevice=00:1A:64:22:32:4B headless xfs panic=60 initrd /initrd_remote.img I have 3 grub configs and I've been able to make the "Remote install" grub config to be the default run. At the moment it boots up but hangs at the prompt. Grub version: 0.98 The other 2 grubs that comes that exists after successful installation and update of the kernel are: splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.32-279.9.1.el6.x86_64) root (hd0,0) kernel /vmlinuz-2.6.32-279.9.1.el6.x86_64 ro root=/dev/mapper/vg_serverprisa-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg_serverprisa/lv_swap rd_NO_MD rd_LVM_LV=vg_serverprisa/lv_root SYSFONT=latarcyrheb-sun16 crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet initrd /initramfs-2.6.32-279.9.1.el6.x86_64.img title CentOS (2.6.32-279.el6.x86_64) root (hd0,0) kernel /vmlinuz-2.6.32-279.el6.x86_64 ro root=/dev/mapper/vg_serverprisa-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=vg_serverprisa/lv_swap rd_NO_MD rd_LVM_LV=vg_serverprisa/lv_root SYSFONT=latarcyrheb-sun16 crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet initrd /initramfs-2.6.32-279.el6.x86_64.img

  Read the article

• Hiding "Syntax OK" from apache2ctl output

  - by Oscar Barrett

  I am checking whether a particular apache module is installed using apache2ctl -M. When listing the modules, apache runs a syntax check on the configuration files which prints out "Syntax OK" if everything is fine. However, this message doesn't seem to be coming from STDOUT or STDERR as it shows even if all output is redirected to /dev/null. i.e. $ sudo apache2ctl -M Loaded Modules: core_module (static) log_config_module (static) ... Syntax OK $ sudo apache2ctl -M >/dev/null Syntax OK How is this being outputted, and is it possible to hide?

  Read the article

• When copying VM filesystem over netcat, dd copies double the disk size

  - by JivanAmara

  I'm attempting to copy the disk of a working headless virtualbox VM (VM1) on one server to a new VM (VM2) on a vCloud server. I don't have access to the host of VM2. The OS is Windows Server 2003 (32-bit) I start both VMs with a live Knoppix image. I run 'nc -l | dd of=/dev/sda bs=512' on VM2 I run 'dd if=/dev/sda bs=512 | nc ' on VM1 I previously did this with another windows VM and it worked fine. VM1 has a disk of size ~70GB (verified with fdisk); however, the amount of data dd reports read/written is ~139GB. Of course the target machine doesn't work properly. I get a Windows splash screen, then blue error screen with general 'system not working' information. I'm at a loss what could cause this. Any ideas?

  Read the article

• ProFTPd: Multiple Domain VirtualHosts on one IP address

  - by Badger

  I have a webserver that we are giving a consultant FTP access to. For one domain hosted on that server he needs access to a "dev" directory and for a different domain hosted on that server he needs access to a different directory. I am trying to set this up with VirtualHosts, but I am having issues. Here is the VirtualHost bit of my proftpd.conf file: <VirtualHost www.example2.com> ServerName "Example 2" DefaultRoot /var/www/example2/dev </VirtualHost> <VirtualHost www.example1.com> ServerName "Example 1" DefaultServer on DefaultRoot /var/www/example1 </VirtualHost> When I FTP to either domain I always get the first VirtualHost, even if I FTP to the second domain.

  Read the article

• printing in linux

  - by Neilvert Noval

  Hello all. I've been a linux user for quite some time. But haven't do printing until now. I just wanna ask how to do printing in linux? I have researched a bit on it. I found some $> echo "print me" > /dev/lp0, but unfortunately, I have no lp0 in my /dev. I don't know if this is the right thing to do. Nevertheless, please tell me of ways on how I can print from my linux box. Here are some details: OS: debian linux 5.0.4 printer: disclosed until it is necessary connection: usb connection So do i need to add a printer first? From the printer manual that I read, this printer model has no linux driver.

  Read the article

• Disable log rotation for apache or move file location

  - by vittocia

  I need to change the log retention for apache, currently is seems to be running on the default from logrotate.conf which is weekly. It creates 'access_log.1' 'access_log.2' and so on for each week. The problem is it deletes the last log file every week, 'access_log.5', I need the logs to keep going infinitely instead of the last log being deleted every week. It seems to be running on the default value from logrotate.conf - I don't want to change the default values held in that file, so I assume there is a way to change the retention using the /etc/logrotate.d/httpd file? the contents are as follows: /var/log/httpd/*log { missingok notifempty sharedscripts postrotate /sbin/service httpd reload > /dev/null 2>/dev/null || true endscript } what can I add/change to stop the last log being deleted every week?

  Read the article

• Is ext4 more expensive than ntfs?

  - by ???

  I have just converted an NTFS partition to ext4, however the total space seems reduced from 421G to 415G. Where did the 6G go? And, the reserved space is grown to 199M in ext4, much larger compared to 78M in NTFS, why? The partition is mainly used for movies/musics, so most files are very large (10M each). I want to use ext4 file system, is there any suggestion? mkfs.ntfs: /dev/sdb4 421G 78M 421G 1% /mnt/mmedia mkfs.ext4: /dev/sdb4 415G 199M 393G 1% /mnt/mmedia It's also weired that the remaining size of ext4 is 393G, shouldn't it be 415G or 414G? What happened to the disappeared 22G? Compared to NTFS, ext4 seems eaten 28G in total.

  Read the article

• controlling the bandwidth using tc

  - by Supratik

  Hi I have two NIC etho is connected to the internet and eth1 is connected to the LAN. I want to restrict the download limit using iptables and linux tc. So I wrote a test script to verify if it is working. My iptables configuration is as below. iptables -t mangle -N INBOUND iptables -t mangle -I PREROUTING -i eth0 -j INBOUND iptables -t mangle -A INBOUND -j MARK --set-mark 60 My ingress configuration is as below. tc qdisc add dev eth0 handle 1: ingress tc filter add dev eth0 parent 1: protocol ip prio 1 handle 60 fw police rate 100kbit burst 20kbit drop flowid :1 Can you please tell me what I am missing here ?

  Read the article

• Reverse lookup of inode/file from offset in raw device on linux and ext3/4?

  - by lilinjn

  In linux, given an offset into a raw disk device, is it possible to map back to an partition + inode? For example, suppose I know that string "xyz" is contained at byte offset 1000000 on /dev/sda: (e.g. xxd -l 100 -s 1000000 /dev/sda shows a dump that begins with "xyz") 1) How do I figure out which partition (if any) offset 1000000 is located in?(I imagine this is easy, but am including it for completeness) 2) Assuming the offset is located in a partition, how do I go about finding which inode it belongs to (or determine that it is part of free space) ? Presumably this is filesystem specific, in which case does any one know how to do this for ext4 and ext3?

  Read the article

• Ping6 fail on linux

  - by michelemarcon

  I have 2 linux box configured with IPv4. I have tried adding IPv6 to them. I have issued this commands on box1: ip -6 addr add fd32:2d7f:f3c1::1/48 dev eth0 And I get this: inet6 addr: fd32:2d7f:f3c1::1/48 Scope:Global Then I have issued this command on box2: ip -6 addr add fd32:2d7f:f3c2::1/48 dev eth0 Back on box1 (command/response): ping6 fd32:2d7f:f3c1::1 is alive! ping6 fd32:2d7f:f3c2::1 ping6: sendto: Network is unreachable Why doesn't box1 ping box2 (of course, also box2 can't ping box1)?

  Read the article

• raid 5 creation (using mdadm) lots of read/writes on creation: is this normal?

  - by Gbrits

  I created a software raid 5 disk using: mdadm -C /dev/md2 -l5 -n4 /dev/sd[i-l] at the same time I'm using dstat to see io-activity: dstat -c -d -D total,sda1,md2,sdi,sdj,sdk,sdl -l -m -n and notice that disks sd[i-k] are all read from and sdl is written to. Now, I do understand that raid5 has to be configured, but it takes a really long time and all disks are clean & formatted (using xfs) so I figure there might be some kind of shortcut to skip (unnecessary? ) checking.. Is it? The creation is part of a time-critical nightly batch-process (run on amazon ec2) so it's not a one-time thing. Thanks, Geert-Jan

  Read the article

• When HDD becomes full, how to create a symbolic link to the data store on another disk?

  - by Brij Raj Singh

  I have a Linux Ubuntu machine which has an X GB hard disk. There is folder, say, /opt/software/data. The disk /dev/sda1 is almost full and I have attached another disk at /dev/sda2 which is mounted at /hdd2. Is it possible for me to link the folders /opt/software/data with /hdd2/software/data so, that every file get stored in the /hdd2/software/data but may be referred from the /opt/software/data? I can't do a reinstall of the software that creates this data, to change the default location of storage.

  Read the article

• Windows 2008 Server on VMWare (hardware)

  - by Bill

  I want to setup a single server to run a few virtual servers for our datacenter. I do not have a lot of money to spend so I am trying to gain bang for the buck. My budget is around $2,000. So I was thinking about building the following as the VMWare physical server: Intel iCore 7 950 (LGA1366, 4 cores,8 threads) Gigabyte GA-X58-USB3 LGA 1366 X58 ATX Intel Motherboard 24 GB of Viper II Series, Sector 7 Edition, Extreme Performance DDR3-1600 (PC3-12800) CL9 Triple Channel Memory VelociRaptor 300GB 10,000 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive I am planning on running the newest version of VMWare ESXi (64-bit). On these I am planning on running a few various servers: Windows 2008 Server R2 w/ IIS (several custom built ASP.NET Apps) Windows 2008 Server R2 w/ MS SQL 2008 Database Server Linux Web Server w/ Several WordPress Blogs (XAMPP?) Windows 2008 Server R2 w/ IIS (DEV ENVIRONMENT) Windows 2008 Server R2 w/ MS SQL 2008 Database Server (DEV ENVIRONMENT) In your opinion, will this hardware be sufficient to run the above load with room for possible 2-3 more virtual machines (probably lightweight web servers)?

  Read the article

• gevent with Django as daemon

  - by jonathonmorgan

  I've been developing an app using django_socketio (a python port of the Node equivalent), which relies on gevent. It ships with a Django management command that runs gevent's pywsgi server, but that of course stops when I close my terminal window, just like Django's dev server. This is a proof of concept, and there's no expectation that it would hold up in a production environment, but I'd like to have the server at least "permanently" process HTTP requests, so I don't need to manually start the dev server in order to demo. I'm assuming I need to run this as a daemon process, but prior to this I've only used apache and mod_wsgi, so unsure of where to begin, or even how I would go about starting a daemon. I found gevent-spawn, which looks promising, but it's unclear to me how that code is executed. Basically, how would I use gevent to serve a Django app in a setting without manually starting/stopping the server?

  Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >