Search Results

Search found 22160 results on 887 pages for 'speed up computer'.

Page 124/887 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

  • How do I optimize this postfix expression tree for speed?

    - by Peter Stewart
    Thanks to the help I received in this post: I have a nice, concise recursive function to traverse a tree in postfix order: deque <char*> d; void Node::postfix() { if (left != __nullptr) { left->postfix(); } if (right != __nullptr) { right->postfix(); } d.push_front(cargo); return; }; This is an expression tree. The branch nodes are operators randomly selected from an array, and the leaf nodes are values or the variable 'x', also randomly selected from an array. char *values[10]={"1.0","2.0","3.0","4.0","5.0","6.0","7.0","8.0","9.0","x"}; char *ops[4]={"+","-","*","/"}; As this will be called billions of times during a run of the genetic algorithm of which it is a part, I'd like to optimize it for speed. I have a number of questions on this topic which I will ask in separate postings. The first is: how can I get access to each 'cargo' as it is found. That is: instead of pushing 'cargo' onto a deque, and then processing the deque to get the value, I'd like to start processing it right away. I don't yet know about parallel processing in c++, but this would ideally be done concurrently on two different processors. In python, I'd make the function a generator and access succeeding 'cargo's using .next(). But I'm using c++ to speed up the python implementation. I'm thinking that this kind of tree has been around for a long time, and somebody has probably optimized it already. Any Ideas? Thanks

    Read the article

  • How to run an .exe application in another computer?

    - by ADAM
    I am working on a C# application in Visual Studio 2013. When I run the .exe file from my computer, the application runs very well and all the features work. When I tried to run the .exe on another computer, the database side doesn't work well and the connection with the database couldn't be opened. The SqlConnection is constructed as follows: SqlConnection cn = new SqlConnection("Data Source=ADAM-PC;Initial Catalog=integrationdatabase;Integrated Security=True" I don't know how to change the data source to make the connection with the database established in another computer. How can I solve this problem?

    Read the article

  • how does teamviewer find my computer even if my comp. behind of the firewall and firewall isn't conf

    - by uzay95
    Did you use teamviewer? (comic question i know... Who doesn't use it?) Do you have any idea how does teamviewer make connection even if i am behind the router, firewall, switch and my local firewall..? I'm trying to imagine a connection that is between remote machinge and my computer. Remote machine is sending the packets (and its header (for instance, destination IP, message body)) to me but it only knows my id number(which is given by my local teamviewer application). And this packets are reaching to my computer even if there is a juniper firewall (and also my windows firewall). What kind a message body is recieving by computer? (of course it is not like xml, text, html, excel :) Do you have any idea? PS. Please share your knowledge like you are explaining to beginner level user.

    Read the article

  • How can I speed up a 1800-line PHP include? It's slowing my pageload down to 10sec/view

    - by somerandomguy
    I designed my code to put all important functions in a single PHP file that's now 1800 lines long. I call it in other PHP files--AJAX processors, for example--with a simple "require_once("codeBank.php")". I'm discovering that it takes about 10 seconds to load up all those functions, even though I have nothing more than a few global arrays and a bunch of other functions involved. The main AJAX processor code, for example, is taking 8 seconds just to do a simple syntax verification (whose operational function is stored in codeBank.php). When I comment out the require_once, my AJAX response time speeds up from 10sec to 40ms, so it's pretty clear that PHP's trying to do something with those 1800 lines of functions. That's even with APC installed, which is surprising. What should I do to get my code speed back to the sub-100ms level? Am I failing to get the cache's benefit somehow? Do I need to cut that single function bank file into different pieces? Are there other subtle things that I could be doing to screw up my response time? Or barring all that, what are some tools to dig further into which PHP operations are hitting speed bumps?

    Read the article

  • How to make a change in Back End Database When my computer turn off by any fault

    - by Gulu
    i have one windows form application in v s 2010. i want to maintain a FLAG in Which there is two values of FLAG 1) yes and 2) no i want that when a form is load a Flag value is yes and The form is close the flag value is no in my back end Database It is same like sing in person on any web site..... But my Problem is that How Can i manatian it any how the my computer is turn off ....... i store a database on single computer that is server.but i also want a code for on same computer,also

    Read the article

  • Photoshop CS4 slowing down, need advice to improve speed.

    - by Pennf0lio
    Hi, I just recently experienced problem with my Photoshop, It seem that it is slowing down when I am doing graphics design. Big or small files ( from 20 x 20 inch 300 dpi of resolution to 800x600 72 resolution ) it is really slowing down. Particularly when I am panning to my project It just get stuck for a few seconds then back to normal with slow movement. Can you guess what's wrong? I have an updated antivirus and I don't think virus is causing it. other adobe suite is working fine just my photoshop. I am running in windows 7, using Intel Core2 Duo 2.40 Ghz and has an Installed Ram of 2 GB. My primary scratch disk has 21 Gigabyte left and the secondary has a 13.89 GB. I need a solution urgently. I am planning to reformat my computer just to resolve my problem.

    Read the article

  • Fan not working on thinkpad L430, laptop overheating

    - by Dirk B.
    I'm having problems controlling the fan of my Lenovo Thinkpad L430. The fan doesn't start. Without any fan control installed the fan just doesn't run. If I run stress, it does run a little, but it's nowhere near the speed it should be. After a while, the laptop just overheats and stops. I Tried to install tp-fancontrol, and enabled thinkpad_acpi fancontrol=1, but to no avail. If I try to set the fan speed manually, it doesn't start up. In windows, there's a program called TPFanControl. It turns out that this laptop uses a different scheme to control the fan than other thinkpads. The level runs from 0 to 255, and max = 0 and min=255. Now I'm looking for a fan control program that works for linux. Does anyone know if it actually exists? Anyone with any experience on fan control on a L430? Update: sudo pwmconfig gives the following output: # pwmconfig revision 5857 (2010-08-22) This program will search your sensors for pulse width modulation (pwm) controls, and test each one to see if it controls a fan on your motherboard. Note that many motherboards do not have pwm circuitry installed, even if your sensor chip supports pwm. We will attempt to briefly stop each fan using the pwm controls. The program will attempt to restore each fan to full speed after testing. However, it is ** very important ** that you physically verify that the fans have been to full speed after the program has completed. Found the following devices: hwmon0 is acpitz hwmon1/device is coretemp hwmon2/device is thinkpad Found the following PWM controls: hwmon2/device/pwm1 hwmon2/device/pwm1 is currently setup for automatic speed control. In general, automatic mode is preferred over manual mode, as it is more efficient and it reacts faster. Are you sure that you want to setup this output for manual control? (n) y Giving the fans some time to reach full speed... Found the following fan sensors: hwmon2/device/fan1_input current speed: 0 ... skipping! There are no working fan sensors, all readings are 0. Make sure you have a 3-wire fan connected. You may also need to increase the fan divisors. See doc/fan-divisors for more information. regards, Dirk

    Read the article

  • Lenovo Thinkpad L430 overheating due to fan problems

    - by Dirk B.
    This is the same question as Fan not working on thinkpad L430, laptop overheating, but that question has been marked as a duplicate, which it is not, and I cannot reopen it. I'm having problems controlling the fan of my Lenovo Thinkpad L430. The fan doesn't start. Without any fan control installed the fan just doesn't run. If I run stress, it does run a little, but it's nowhere near the speed it should be. After a while, the laptop just overheats and stops. I Tried to install tp-fancontrol, and enabled thinkpad_acpi fancontrol=1, but to no avail. If I try to set the fan speed manually, it doesn't start up. In windows, there's a program called TPFanControl. It turns out that this laptop uses a different scheme to control the fan than other thinkpads. The level runs from 0 to 255, and max = 0 and min=255. Now I'm looking for a fan control program that works for linux. Does anyone know if it actually exists? Anyone with any experience on fan control on a L430? Update: sudo pwmconfig gives the following output: # pwmconfig revision 5857 (2010-08-22) This program will search your sensors for pulse width modulation (pwm) controls, and test each one to see if it controls a fan on your motherboard. Note that many motherboards do not have pwm circuitry installed, even if your sensor chip supports pwm. We will attempt to briefly stop each fan using the pwm controls. The program will attempt to restore each fan to full speed after testing. However, it is ** very important ** that you physically verify that the fans have been to full speed after the program has completed. Found the following devices: hwmon0 is acpitz hwmon1/device is coretemp hwmon2/device is thinkpad Found the following PWM controls: hwmon2/device/pwm1 hwmon2/device/pwm1 is currently setup for automatic speed control. In general, automatic mode is preferred over manual mode, as it is more efficient and it reacts faster. Are you sure that you want to setup this output for manual control? (n) y Giving the fans some time to reach full speed... Found the following fan sensors: hwmon2/device/fan1_input current speed: 0 ... skipping! There are no working fan sensors, all readings are 0. Make sure you have a 3-wire fan connected. You may also need to increase the fan divisors. See doc/fan-divisors for more information. update: If you need it, lspci is available here

    Read the article

  • Help Prevent Carpal Tunnel Problems with Workrave

    - by Matthew Guay
    Whether for work or leisure, many of us spend entirely too much time on the computer everyday.  This puts us at risk of having or aggravating Carpal Tunnel problems, but thanks to Workrave you can help to divert these problems. Workrave helps Carpal Tunnel problems by reminding you to get away from your computer periodically.  Breaking up your computer time with movement can help alleviate many computer and office related health problems.  Workrave helps by reminding you to take short pauses after several minutes of computer use, and longer breaks after continued use.  You can also use it to keep from using the computer for too much You time in a day.  Since you can change the settings to suit you, this can be a great way to make sure you’re getting the breaks you need. Install Workrave on Windows If you’re using Workrave on Windows, download (link below) and install it with the default settings. One installation setting you may wish to change is the startup.  By default Workrave will run automatically when you start your computer; if you don’t want this, you can simply uncheck the box and proceed with the installation. Once setup is finished, you can run Workrave directly from the installer. Or you can open it from your start menu by entering “workrave” in the search box. Install Workrave in Ubuntu If you wish to use it in Ubuntu, you can install it directly from the Ubuntu Software Center.  Click the Applications menu, and select Ubuntu Software Center. Enter “workrave” into the search box in the top right corner of the Software Center, and it will automatically find it.  Click the arrow to proceed to Workrave’s page. This will give you information about Workrave; simply click Install to install Workrave on your system. Enter your password when prompted. Workrave will automatically download and install.   When finished, you can find Workrave in your Applications menu under Universal Access. Using Workrave Workrave by default shows a small counter on your desktop, showing the length of time until your next Micro break (30 second break), Rest break (10 minute break), and max amount of computer usage for the day. When it’s time for a micro break, Workrave will popup a reminder on your desktop. If you continue working, it will disappear at the end of the timer.  If you stop, it will start a micro-break which will freeze most on-screen activities until the timer is over.  You can click Skip or Postpone if you do not want to take a break right then. After an hour of work, Workrave will give you a 10 minute rest break.  During this it will show you some exercises that can help eliminate eyestrain, muscle tension, and other problems from prolonged computer usage.  You can click through the exercises, or can skip or postpone the break if you wish.   Preferences You can change your Workrave preferences by right-clicking on its icon in your system tray and selecting Preferences. Here you can customize the time between your breaks, and the length of your breaks.  You can also change your daily computer usage limit, and can even turn off the postpone and skip buttons on notifications if you want to make sure you follow Workrave and take your rests! From the context menu, you can also choose Statistics.  This gives you an overview of how many breaks, prompts, and more were shown on a given day.  It also shows a total Overdue time, which is the total length of the breaks you skipped or postponed.  You can view your Workrave history as well by simply selecting a date on the calendar.   Additionally, the Activity tab in the Statics pane shows more info about your computer usage, including total mouse movement, mouse button clicks, and keystrokes. Conclusion Whether you’re suffering with Carpal Tunnel or trying to prevent it, Workrave is a great solution to help remind you to get away from your computer periodically and rest.  Of course, since you can simply postpone or skip the prompts, you’ve still got to make an effort to help your own health.  But it does give you a great way to remind yourself to get away from the computer, and especially for geeks, this may be something that we really need! Download Workrave Similar Articles Productive Geek Tips Switch to the Dvorak Keyboard Layout in XPAccess Your MySQL Server Remotely Over SSHHow to Secure Gaim Instant Messenger traffic at Work with SecureCRT and SSHConnect to VMware Server Console Over SSHDisclaimers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader

    Read the article

  • LSI 9285-8e and Supermicro SC837E26-RJBOD1 duplicate enclosure ID and slot numbers

    - by Andy Shinn
    I am working with 2 x Supermicro SC837E26-RJBOD1 chassis connected to a single LSI 9285-8e card in a Supermicro 1U host. There are 28 drives in each chassis for a total of 56 drives in 28 RAID1 mirrors. The problem I am running in to is that there are duplicate slots for the 2 chassis (the slots list twice and only go from 0 to 27). All the drives also show the same enclosure ID (ID 36). However, MegaCLI -encinfo lists the 2 enclosures correctly (ID 36 and ID 65). My question is, why would this happen? Is there an option I am missing to use 2 enclosures effectively? This is blocking me rebuilding a drive that failed in slot 11 since I can only specify enclosure and slot as parameters to replace a drive. When I do this, it picks the wrong slot 11 (device ID 46 instead of device ID 19). Adapter #1 is the LSI 9285-8e, adapter #0 (which I removed due to space limitations) is the onboard LSI. Adapter information: Adapter #1 ============================================================================== Versions ================ Product Name : LSI MegaRAID SAS 9285-8e Serial No : SV12704804 FW Package Build: 23.1.1-0004 Mfg. Data ================ Mfg. Date : 06/30/11 Rework Date : 00/00/00 Revision No : 00A Battery FRU : N/A Image Versions in Flash: ================ BIOS Version : 5.25.00_4.11.05.00_0x05040000 WebBIOS Version : 6.1-20-e_20-Rel Preboot CLI Version: 05.01-04:#%00001 FW Version : 3.140.15-1320 NVDATA Version : 2.1106.03-0051 Boot Block Version : 2.04.00.00-0001 BOOT Version : 06.253.57.219 Pending Images in Flash ================ None PCI Info ================ Vendor Id : 1000 Device Id : 005b SubVendorId : 1000 SubDeviceId : 9285 Host Interface : PCIE ChipRevision : B0 Number of Frontend Port: 0 Device Interface : PCIE Number of Backend Port: 8 Port : Address 0 5003048000ee8e7f 1 5003048000ee8a7f 2 0000000000000000 3 0000000000000000 4 0000000000000000 5 0000000000000000 6 0000000000000000 7 0000000000000000 HW Configuration ================ SAS Address : 500605b0038f9210 BBU : Present Alarm : Present NVRAM : Present Serial Debugger : Present Memory : Present Flash : Present Memory Size : 1024MB TPM : Absent On board Expander: Absent Upgrade Key : Absent Temperature sensor for ROC : Present Temperature sensor for controller : Absent ROC temperature : 70 degree Celcius Settings ================ Current Time : 18:24:36 3/13, 2012 Predictive Fail Poll Interval : 300sec Interrupt Throttle Active Count : 16 Interrupt Throttle Completion : 50us Rebuild Rate : 30% PR Rate : 30% BGI Rate : 30% Check Consistency Rate : 30% Reconstruction Rate : 30% Cache Flush Interval : 4s Max Drives to Spinup at One Time : 2 Delay Among Spinup Groups : 12s Physical Drive Coercion Mode : Disabled Cluster Mode : Disabled Alarm : Enabled Auto Rebuild : Enabled Battery Warning : Enabled Ecc Bucket Size : 15 Ecc Bucket Leak Rate : 1440 Minutes Restore HotSpare on Insertion : Disabled Expose Enclosure Devices : Enabled Maintain PD Fail History : Enabled Host Request Reordering : Enabled Auto Detect BackPlane Enabled : SGPIO/i2c SEP Load Balance Mode : Auto Use FDE Only : No Security Key Assigned : No Security Key Failed : No Security Key Not Backedup : No Default LD PowerSave Policy : Controller Defined Maximum number of direct attached drives to spin up in 1 min : 10 Any Offline VD Cache Preserved : No Allow Boot with Preserved Cache : No Disable Online Controller Reset : No PFK in NVRAM : No Use disk activity for locate : No Capabilities ================ RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span Supported Drives : SAS, SATA Allowed Mixing: Mix in Enclosure Allowed Mix of SAS/SATA of HDD type in VD Allowed Status ================ ECC Bucket Count : 0 Limitations ================ Max Arms Per VD : 32 Max Spans Per VD : 8 Max Arrays : 128 Max Number of VDs : 64 Max Parallel Commands : 1008 Max SGE Count : 60 Max Data Transfer Size : 8192 sectors Max Strips PerIO : 42 Max LD per array : 16 Min Strip Size : 8 KB Max Strip Size : 1.0 MB Max Configurable CacheCade Size: 0 GB Current Size of CacheCade : 0 GB Current Size of FW Cache : 887 MB Device Present ================ Virtual Drives : 28 Degraded : 0 Offline : 0 Physical Devices : 59 Disks : 56 Critical Disks : 0 Failed Disks : 0 Supported Adapter Operations ================ Rebuild Rate : Yes CC Rate : Yes BGI Rate : Yes Reconstruct Rate : Yes Patrol Read Rate : Yes Alarm Control : Yes Cluster Support : No BBU : No Spanning : Yes Dedicated Hot Spare : Yes Revertible Hot Spares : Yes Foreign Config Import : Yes Self Diagnostic : Yes Allow Mixed Redundancy on Array : No Global Hot Spares : Yes Deny SCSI Passthrough : No Deny SMP Passthrough : No Deny STP Passthrough : No Support Security : No Snapshot Enabled : No Support the OCE without adding drives : Yes Support PFK : Yes Support PI : No Support Boot Time PFK Change : Yes Disable Online PFK Change : No PFK TrailTime Remaining : 0 days 0 hours Support Shield State : Yes Block SSD Write Disk Cache Change: Yes Supported VD Operations ================ Read Policy : Yes Write Policy : Yes IO Policy : Yes Access Policy : Yes Disk Cache Policy : Yes Reconstruction : Yes Deny Locate : No Deny CC : No Allow Ctrl Encryption: No Enable LDBBM : No Support Breakmirror : No Power Savings : Yes Supported PD Operations ================ Force Online : Yes Force Offline : Yes Force Rebuild : Yes Deny Force Failed : No Deny Force Good/Bad : No Deny Missing Replace : No Deny Clear : No Deny Locate : No Support Temperature : Yes Disable Copyback : No Enable JBOD : No Enable Copyback on SMART : No Enable Copyback to SSD on SMART Error : Yes Enable SSD Patrol Read : No PR Correct Unconfigured Areas : Yes Enable Spin Down of UnConfigured Drives : Yes Disable Spin Down of hot spares : No Spin Down time : 30 T10 Power State : Yes Error Counters ================ Memory Correctable Errors : 0 Memory Uncorrectable Errors : 0 Cluster Information ================ Cluster Permitted : No Cluster Active : No Default Settings ================ Phy Polarity : 0 Phy PolaritySplit : 0 Background Rate : 30 Strip Size : 64kB Flush Time : 4 seconds Write Policy : WB Read Policy : Adaptive Cache When BBU Bad : Disabled Cached IO : No SMART Mode : Mode 6 Alarm Disable : Yes Coercion Mode : None ZCR Config : Unknown Dirty LED Shows Drive Activity : No BIOS Continue on Error : No Spin Down Mode : None Allowed Device Type : SAS/SATA Mix Allow Mix in Enclosure : Yes Allow HDD SAS/SATA Mix in VD : Yes Allow SSD SAS/SATA Mix in VD : No Allow HDD/SSD Mix in VD : No Allow SATA in Cluster : No Max Chained Enclosures : 16 Disable Ctrl-R : Yes Enable Web BIOS : Yes Direct PD Mapping : No BIOS Enumerate VDs : Yes Restore Hot Spare on Insertion : No Expose Enclosure Devices : Yes Maintain PD Fail History : Yes Disable Puncturing : No Zero Based Enclosure Enumeration : No PreBoot CLI Enabled : Yes LED Show Drive Activity : Yes Cluster Disable : Yes SAS Disable : No Auto Detect BackPlane Enable : SGPIO/i2c SEP Use FDE Only : No Enable Led Header : No Delay during POST : 0 EnableCrashDump : No Disable Online Controller Reset : No EnableLDBBM : No Un-Certified Hard Disk Drives : Allow Treat Single span R1E as R10 : No Max LD per array : 16 Power Saving option : Don't Auto spin down Configured Drives Max power savings option is not allowed for LDs. Only T10 power conditions are to be used. Default spin down time in minutes: 30 Enable JBOD : No TTY Log In Flash : No Auto Enhanced Import : No BreakMirror RAID Support : No Disable Join Mirror : No Enable Shield State : Yes Time taken to detect CME : 60s Exit Code: 0x00 Enclosure information: # /opt/MegaRAID/MegaCli/MegaCli64 -encinfo -a1 Number of enclosures on adapter 1 -- 3 Enclosure 0: Device ID : 36 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port B Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 65 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11820 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 48 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 1: Device ID : 65 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port A Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 36 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11760 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 47 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 2: Device ID : 252 Number of Slots : 8 Number of Power Supplies : 0 Number of Fans : 0 Number of Temperature Sensors : 0 Number of Alarms : 0 Number of SIM Modules : 1 Number of Physical Drives : 0 Status : Normal Position : 1 Connector Name : Unavailable Enclosure type : SGPIO Failed in first Inquiry commnad FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : Unavailable Inquiry data : Vendor Identification : LSI Product Identification : SGPIO Product Revision Level : N/A Vendor Specific : Exit Code: 0x00 Now, notice that each slot 11 device shows an enclosure ID of 36, I think this is where the discrepancy happens. One should be 36. But the other should be on enclosure 65. Drives in slot 11: Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 5, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 48 WWN: Sequence Number: 11 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : YES Device Firmware Level: A5C0 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8a53 Connected Port Number: 1(path0) Inquiry Data: MJ1311YNG6YYXAHitachi HDS5C3030ALA630 MEAOA5C0 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 19, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 19 WWN: Sequence Number: 4 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : NO Device Firmware Level: A580 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8e53 Connected Port Number: 0(path0) Inquiry Data: MJ1313YNG1VA5CHitachi HDS5C3030ALA630 MEAOA580 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Update 06/28/12: I finally have some new information about (what we think) the root cause of this problem so I thought I would share. After getting in contact with a very knowledgeable Supermicro tech, they provided us with a tool called Xflash (doesn't appear to be readily available on their FTP). When we gathered some information using this utility, my colleague found something very strange: root@mogile2 test]# ./xflash.dat -i get avail Initializing Interface. Expander: SAS2X36 (SAS2x36) 1) SAS2X36 (SAS2x36) (50030480:00EE917F) (0.0.0.0) 2) SAS2X36 (SAS2x36) (50030480:00E9D67F) (0.0.0.0) 3) SAS2X36 (SAS2x36) (50030480:0112D97F) (0.0.0.0) This lists the connected enclosures. You see the 3 connected (we have since added a 3rd and a 4th which is not yet showing up) with their respective SAS address / WWN (50030480:00EE917F). Now we can use this address to get information on the individual enclosures: [root@mogile2 test]# ./xflash.dat -i 5003048000EE917F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00EE917F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 5003048000E9D67F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00E9D67F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 500304800112D97F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:0112D97F Enclosure Logical Id: 50030480:0112D97F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 Did you catch it? The first 2 enclosures logical ID is partially masked out where the 3rd one (which has a correct unique enclosure ID) is not. We pointed this out to Supermicro and were able to confirm that this address is supposed to be set during manufacturing and there was a problem with a certain batch of these enclosures where the logical ID was not set. We believe that the RAID controller is determining the ID based on the logical ID and since our first 2 enclosures have the same logical ID, they get the same enclosure ID. We also confirmed that 0000007F is the default which comes from LSI as an ID. The next pointer that helps confirm this could be a manufacturing problem with a run of JBODs is the fact that all 6 of the enclosures that have this problem begin with 00E. I believe that between 00E8 and 00EE Supermicro forgot to program the logical IDs correctly and neglected to recall or fix the problem post production. Fortunately for us, there is a tool to manage the WWN and logical ID of the devices from Supermicro: ftp://ftp.supermicro.com/utility/ExpanderXtools_Lite/. Our next step is to schedule a shutdown of these JBODs (after data migration) and reprogram the logical ID and see if it solves the problem. Update 06/28/12 #2: I just discovered this FAQ at Supermicro while Google searching for "lsi 0000007f": http://www.supermicro.com/support/faqs/faq.cfm?faq=11805. I still don't understand why, in the last several times we contacted Supermicro, they would have never directed us to this article :\

    Read the article

  • Do glue records in non-circular dns-lookups speed up domain resolution or not?

    - by Joe Hopfgartner
    Doing a lookup for my domain on http://www.intodns.com/ I noticed theese two messages: In Parent section: DNS Parent sent Glue The parent nameserver g.gtld-servers.net is not sending out GLUE for every nameservers listed, meaning he is sending out your nameservers host names without sending the A records of those nameservers. It's ok but you have to know that this will require an extra A lookup that can delay a little the connections to your site. This happens a lot if you have nameservers on different TLD (domain.com for example with nameserver ns.domain.org.) and in NS section: Glue for NS records INFO: GLUE was not sent when I asked your nameservers for your NS records.This is ok but you should know that in this case an extra A record lookup is required in order to get the IPs of your NS records. The nameservers without glue are: 109.230.225.96 84.201.40.52 You can fix this for example by adding A records to your nameservers for the zones listed above. I do perfectly understand that the primary objective of glue records is to resolve circular dependencies. The classic use case: my domain is example.com and I want to have the nameserver ns1.example.com. This will never work because i cannot know the ip of ns1.example.com if I don't fetch example.com and in order to do that I need to fetch it from ns1.example.com. To resolve this deadlock I add a glue record to ns1.example.com containing the ip adress of the nameserver, so this can work out. So this problem does not occour if the nameservers are in a different TLD than the domain i want to look up. But however to fetch the zone information from the nameservers I need to know their ip adress right? And in order to know that i need to fetch the zone the nameservers are in from their respective nameservers, right? (or rather my ISP needs to do that in the background) So an extra lookup that takes time? If I now have glue records, I know the IP adress right away without the need to look it up - so this should speed up the resolution of my domain, shouldnt it? However my DNS zone provider (tecserver.at) replied that this would make no sense because "we are not running ns1.ourdomain.com an ns1.ourdomain.com as authorative NS for ourdomain.com. This would be the only sense for glue records. Tecserver has a glue record because the NS for tecserver.at are ns1.tecserver.at and ns2.tecserver.at. Therefore a glue record is needed for resolution.

    Read the article

  • This operation has been canceled due to restrictions in effect on this computer. Please contact your

    - by WebDude
    I am having a highly annoying problem on Windows 7 with Microsoft Outlook 2007. Whenever I click on any hyperlinks I am present with the message This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator and let's not forget the most ear-piecing "DING" to accompany this wonderful informative message. Now I have searched the web high and low for a solution here and most sources suggest the same solution of resetting your IE as your default browser. Tried .. failed A lot of sources suggest this has something to do with installing and uninstalling chrome. I have never installed Chrome but am actually consdering this to see if it by some chance fixes my computer. A lot of sources also point to a microsoft kb article 325478 which is focused around Windows XP and totally unrelated to my problem. I see there are some other queries on SuperUser with no resolution. Please can someone help solve this highly annoying issue. I am running Window 7 professional x64 Microsoft Office 2007 Microsoft Security Essentials Running in a windows work group with default policy settings HELP!

    Read the article

  • Wacom consumer tablet driver service may crash while opening Bamboo Preferences, often after resuming computer from sleep

    - by DragonLord
    One of the ExpressKeys on my Wacom Bamboo Capture graphics tablet is mapped to Bamboo Preferences, so that I can quickly access the tablet settings and view the battery level (I have the Wireless Accessory Kit installed). However, when I connect the tablet to the computer, in wired or wireless mode, and attempt to open Bamboo Preferences, the Wacom consumer tablet driver service may crash, most often when I try to do so after resuming the computer from sleep. There is usually no direct indication of the crash (although I once did get Tablet Service for consumer driver stopped working and was closed), only that the cursor shows that the system is busy for a split second. When this happens, the pen no longer tracks on the screen when in proximity of the tablet (even though it is detected by the tablet itself); however, touch continues to function correctly. To recover from this condition, I need to restart the tablet driver services. I got tired of having to go through Task Manager to restart the service every time this happens, so I ended up writing the following command script, with a shortcut on the desktop for running it with elevated privileges: net stop TabletServicePen net start TabletServicePen net stop TouchServicePen net start TouchServicePen Is there something I can do to prevent these crashes from happening in the first place, or do I have have to deal with this issue until the driver is updated? Windows 7 Home Premium 64-bit. Tablet drivers are up to date. Technical details Action Center gives the following details about the crash in Reliability Monitor: Source Tablet Service for consumer driver Summary Stopped working Date ?10/?15/?2012 2:48 PM Status Report sent Description Faulting Application Path: C:\Program Files\Tablet\Pen\Pen_Tablet.exe Problem signature Problem Event Name: APPCRASH Application Name: Pen_Tablet.exe Application Version: 5.2.5.5 Application Timestamp: 4e694ecd Fault Module Name: Pen_Tablet.exe Fault Module Version: 5.2.5.5 Fault Module Timestamp: 4e694ecd Exception Code: c0000005 Exception Offset: 00000000002f6cde OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional Information 1: 9d4f Additional Information 2: 9d4f1c8d2c16a5d47e28521ff719cfba Additional Information 3: 375e Additional Information 4: 375ebb9963823eb7e450696f2abb66cc Extra information about the problem Bucket ID: 45598085 Exception code 0xC0000005 means STATUS_ACCESS_VIOLATION. The event log contains essentially the same information.

    Read the article

  • Multiple computers on Ubuntu One

    - by L R Bellmore Jr
    I have added files from 4 computers to Ubuntu One. One computer failed. What happens to the files that I uploaded. Are they still on Ubuntu One? How come when I upload a file from computer A, computer B with the same Ubuntu One account does not sync and load that file into computer B - That has created this question.. what happens to files from computers from which I uploaded documents when those computers are no longer active or failed, or no longer have Ubuntu One on that computer from which the files were uploaded... Have I lost the files? The followup question is how come files from Computer A uploaded to Ubuntu One don't sync to Computer B. That is a related question. I need to shut down a computer, reformat the hard drive and install Linux on the entire harddrive instead of a dual boot with Windows XP as I am going to use Virtual Machines instead.. what happens to the files from the Windows Dual Boot that were uploaded to Ubuntu One? Are they removed from Ubuntu One and then have I lost those files if I don't backup to another service first.

    Read the article

  • How to use my computer as a Headset device for my phone with Bluetooth?

    - by TheJelly
    I want to extract the audio from my phone (the analog TV and FM/AM receiver mainly) and play it through my computer speakers. There is a headphone jack but it is of non-standard size (probably a micro-jack) and I do not have access to a shop that sells that kind of equipment in my area so doing this with Bluetooth is the only solution I can foresee. Both my laptop and my phone support A2DP but for some reason the service (from the phone) does not show up while I add a new connection and the phone does not let me initiate a connection with any other profile except FTP (although it detects other services in the service list like A2DP and works perfectly fine with other profiles like DUN, HID, OPP, SSP if the connection is started through the computer). I am currently using the latest version of the Toshiba stack, I have tried using WIDCOMM but it refuses to install drivers for both the internal Bluetooth (which is a Broadcom device) and the USB Bluetooth that I use on my desktop. The standard Microsoft stack (generic driver) does install but it does not work with both of my devices as they do not detect any Bluetooth devices when scanning. With BlueSoleil (the default stack that came with the USB Bluetooth) I could set my device as "headset" instead of only "laptop/desktop", and this allowed both my phones to detect my laptop as a device they can use as a headset, but the problem with this stack was that only the older phone could actually connect to my laptop and that the internal Bluetooth could not be used. Basically, I want to set the device type as a "headset" for my phone using the Toshiba stack like I did with BlueSoleil. Is there any way this could be done? Thanks. Image: Device type selection http://i.stack.imgur.com/drjC6.jpg

    Read the article

  • Can I use Ubuntu One to sync data fiies between two remote computers

    - by Sleepy John
    I've got two computers, both running Ubuntu with files in their home folders sync'd in to Ubuntu One. I'd like to know if it's possible to make Ubuntu One automatically download data changes that have been uploaded automatically to Ubuntu One from one computer to the equivalent data file in the other. Clarifying a bit further, I've installed Red Notebook in both computers and so they each have their own /.rednotebook/data folder containing a series of .txt files corresponding to the monthly entries in each of them. These are sync'd to upload any changes to those .txt files to Ubuntu One. My question is can I, and if so how, do I make Ubuntu One automatically download and replace those .txt files in the other computer after they've been updated and uploaded from the first computer? I did labouriously manage to download all those text files which had been uploaded from the first computer, from Ubuntu One one-by-one to the second computer, but what I want to do is automate this process and that's where I'm stuck. I'm aware that things could get a bit complicated if both my computers were on-line at the same time and both were simultaneously making different Red Notebook entries, so that's not the scenario I'm trying to cover. All I want to achieve is that whatever updates to the files have been uploaded by one computer, will automatically be downloaded to the same-named files in the other computer as soon as that second computer appears on line and detects that Ubuntu One has matching but more recent sync'd files than the ones it's holding.

    Read the article

  • Weird Network Behavior of Home Router

    - by Stilgar
    First of all I would like to apologize because what you are going to read will be long and confusing but I am fighting this issue for 3 days now and am out of ideas. At home I have the following setup 50Mbps Internet connects into a home router A 2 desktop computers connect to router A via standard FTP LAN cables including one where the cable is ~20m long. a second router B connects to router A via standard FTP LAN cable X (~20m long). several devices connect to the wireless network of router B and there are a couple of desktop computers connected to it through FTP LAN cables. For some reason computers connected to router B when it is connected via cable X have very slow Internet connection. It is like 5 times slower than what is expected. This is the actual problem I am trying to solve. Interesting facts If a computer is connected to cable X directly instead of through router B the Internet speed is just fine (up to the 50Mbps I get from the ISP). Tested with two computers. I have tried replacing router B with another router C and the problem persists. If I connect router B via another cable to the same ports with the same settings everything seems to work fine and computers connected to router B have quite fast Internet I have tested mainly via Speedtest.net but I have also achieved similar speeds when downloading a file The upload speed is quite higher than the download speed in all cases. Note that my ISP usually has higher upload speed (unless it manages to hit the 50Mbps cap) It seems like the speed when connecting through router B with cable X is reduced 4-5 times no matter what the original speed is. For example via router B I get 10Mbps speed to local servers where I get 50Mbps when connected on router A. If I use a distant server where the ISP is only able to provide 25Mbps I get 4-5Mbps on router B. WiFi is slower than LAN on both routers (which is normal) but the reduced speed is reduced proportionally for WiFi. In addition the upload speed is normally higher from the ISP and it is also reduced proportionally. I have tried two different network configurations. One where I have NAT behind NAT where router B connects to router A via the WAN port and has its own DHCP. Second where router B connects to router A via standard LAN port and has DHCP disabled. In this configuration router B serves as a switch and the Network Gateway for computers connected to router B is the internal IP address of router A. Both configurations work just fine but both manifest the reduced speed issue. pings seem to work just fine As far as I can tell none of the cables is crossed The RJ45 setup for cable X orange orange-white brown brow-white blue blue-white green green-white This is a big problem for me since cable X passes through walls and floors and is very hard to replace. I also may have gotten some of the facts wrong because I am almost going crazy with this issue and testing includes going several floors up and down the staircase. One hypothesis I came up with is that the cable is defective in such a way that the voltage from the router affects its performance. When it is connected to a computer it performs just fine but the router has less power. Related hypothesis includes the cable being affected by electricity cables in the walls when the voltage is low. (I know nothing about electricity) So any ideas what to do, what to test or what the issue may be?

    Read the article

  • rsync not copying hard links

    - by A.Ellett
    I have two computers (both MacBook Airs) for which I sync one directory tree in both, but not the entire hard drive or any other directories. Let's say on computer A the directory is /Users/aellett/projects Let's say on computer B the directory is /Users/bellett/projects Generally, I'll log into computer B and then remotely connect to computer A as user 'aellett'. As super user I sync the two project directories as follows: rsync -av /Volumes/aellett/projects/ /Users/bellett/projects/ and this works as expected. On both computers I have another file letter.txt in a different directory which is not getting synced. Let's say on computer A the file is found in /Users/aellett/letters On computer B the file is found in /Users/bellett/correspondence Generally, I don't want to share what's not included in /Users/<username>/projects. But I do want to share this particular file. So on both computer I made a correspondence directory in projects. And then I made hard links as follows On computer A: ln /Users/aellett/letters/letter.txt /Users/aellett/projects/correspondence/letter.txt On computer B: ln /Users/bellett/correspondence/letter.txt /Users/aellett/projects/correspondence/letter.txt The next time I synced the two computers I did the following rsync -av -H /Volumes/aellett/projects/ /Users/bellett/projects/ When I checked on computer B, /Users/bellett/projects/correspondence/letter.txt was correctly synced. But, the hardlink to /Users/bellett/correspondence/letter.txt was no longer there. In other words, /Users/bellett/projects/correspondence/letter.txt was identical to /Users/aellett/projects/correspondence/letter.txt but it differed from /Users/bellett/correspondence/letter.txt. Since these two files were hard linked on both computers, I expected them to still have the hard link. Why are my hard links not being preserved?

    Read the article

  • Computer locking up, looking for bootable hardware diagnostic tool.

    - by Carl Menke
    Well today I helped my friend build a computer. All went pretty well until we got to installing Win7. Thing is, we thought, it was crashing constantly. I adjusted pretty much every setting in the BIOS and removed as much hardware as possible to try and prevent a crash. No dice. So far I've tried running an Ubuntu live cd without the harddrive installed. Nope, crashed on boot. And then I just tried Microsoft's ram utility disk and it eventually locked up on that (the ram passed though). So it seems to me like it's either the CPU (AMD PhenomII x3) or the motherboard that could be bad, but I don't know how to test them individually for problems. I thought it could be a overheating issue, but the BIOS reports that the CPU temp is fine idling around 34C. Any advice or diagnostic disk that could help me out? TL;DR: Computer locks up frequently during use (cannot even boot/install an operating system), memory is fine, probably CPU or Mobo, BIOS says CPU temps are fine. What should I try?

    Read the article

  • Do I need a degree in Computer Science to get a junior Programming job?

    - by t84
    Do I need to go to Uni to get a job as a Junior C# coder? I'm 26 and have been working in Games (Production) for 6 years and I am thinking of a change, I've had exposure to VB6, VBA, HTML, CSS, PHP, JavaScript over the past few years and did a web design NCFE at College, but other than that, nothing else! I'm teaching myself C# at the moment with books and I was wondering 'how much' I need to learn and also how I can improve my chances of getting a programming job! Am I a late started to learn coding? (I know many people who started at a very young age!) Thanks for the help :)

    Read the article

  • Can I use my computer as an A2DP receiver?

    - by Pierre-Yves Gillier
    First, the problem: I'm using a Cowon MP3 player as my main music player with basic earplugs. It offers A2DP & I'd like to have my netbook (running UNE 10.04) act as receiver. Some resources on the web about a2dp, but most are out of date: http://fosswire.com/post/2008/10/better-bluetooth-audio/ http://jprvita.wordpress.com/2009/12/15/1-2-3-4-a2dp-stream/ http://dpillay.wordpress.com/2010/09/27/ubuntu-10-04-a2dp-awesome-headset-music/

    Read the article

  • Network bridge does not work on Windows 7

    - by D. Strout
    I am trying to use Windows 7 to bridge my wireless and wired connections together to get wireless on a second Windows XP computer (fresh install). The network bridge is created successfully, but when I connect the cable from the first computer with the bridged connections to the second one with just a wired connection, nothing happens. The second computer doesn't connect, and the first computer shows no sign of anything different. I tried bridging the connections of a third computer, and connecting this computer to the second computer. This worked (third computer bridged the wireless to the second computer). Thus, the problem must be with the first (Win 7) computer. However, I have no idea what the problem could be. All Internet Connection Sharing is turned off. Homegroup is disabled (it was originally enabled, I thought that might be a problem, so I disabled it). Also, I had VMWare fusion installed, and that created extra items in the "This connection uses the following items" box in the properties dialog. Thinking this might be causing issues, I uninstalled that too. Still, with everything I tried, I can't get it to work. Any suggestions? Edit: Another thing I noticed that might be worth mentioning: The network icon in the Win7 taskbar has a red X on it that means it's not connected, but when I click the icon, it says connected next to my wireless connection, and I am able to access the internet.

    Read the article

  • Do I need a degree in Computer Science to get a Jr Programming job in the world? [closed]

    - by t84
    As above really, do I need to go to Uni to get a job as a Junior C# coder? I'm 26 and have been working in Games (Production) for 6 years and I am thinking of a change, I've had exposure to VB6, VBA, HTML, CSS, PHP, JavaScript over the past few years and did a web design NCFE at College, but other than that, nothing else! I'm teaching myself C# at the moment with books and I was wondering 'how much' I need to learn and also how I can improve my chances of getting a programming job! Am I a late started to learn coding? (I know many people who started at a very young age!) Thanks for the help :)

    Read the article

  • What are some good Software Engineering books for people who didn't formally study Computer Science or Software Engineering?

    - by Kugathasan Abimaran
    I'm a graduate in the electronic & telecommunication field, but working in a software company. I want to continue in this field and going for Masters in it. Can you recommend me some of the best books on software engineering, which cover almost all the topics in software engineering. I am not looking for books about coding practices such as Code Complete, Pragmatic Programmer, but rather general software engineering references.

    Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >