Search Results

Search found 11448 results on 458 pages for 'video camera'.

Page 124/458 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

  • No video signal and server shuts down

    - by Ilya
    I have a brand new server. The motherboard is Intel S2600CP4, two 8-core Intel E5-2600 processors. RAM is 8 DIMM slots of 8 GB each (KVR1600D3D4R11SK4/32GI, I installed them into the blue slots), Power supply is 1050W Corsair. Most of the time the server won't start up - the fans are spinning, but I don't have video signal. And it keeps restarting on its own every 3 mins. But maybe after 30 mins it will eventually load and show something on the screen. I even was able to install ESXi 5.0 (vSphere) on it. It recognizes both CPUs and all of the 64GB of RAM. But even then it worked only for around 5 hours and then restarted on its own. What's the problem? That's a very expensive peace of hardware and I can't afford purchasing a new motherboard/CPU. By the way, on the front panel the "System Status" LED is constantly amber (not blinking), even when the server started successfully. And also in the BIOS I can see lots of "processor 01 unable to apply microcode update 8160" fatal errors. Please help me with issue, I will really appreciate this!

    Read the article

  • Windows Media Center showing Jerky Video on PC

    - by Kris Erickson
    I had to repave my Windows 7 x64 box last week due to a hard drive crash, and for a while everything was running perfectly but now all videos in Windows Media Center are jerky (the sound is fine, they just seem to skip a ton of frames all the time). This is on the local machine, but the same thing happens when I try to stream to my Xbox. The videos all show fine in VLC and Windows Media Player. I guess I must have installed something recently (in the process of getting all the apps I usually have running on my PC) that caused this but for the life of me I can't figure it out. I have updated to the latest video driver (and then rolled back to the standard Windows 7 driver), I have rolled back all the other drivers that I have installed (I believe). I have uninstalled all the codec packs (I also run TVersity, so I hate the TVersity codec pack installed), and I uninstalled TVersity. Nothing seems to help. I have uninstalled windows media center, and reinstalled it from the Programs and Features. I have basically ran out of things to try to fix this, and am almost thinking about reinstalling Windows again. Any suggestions?

    Read the article

  • Cannot set video resolution above 640x480 after installing Windows XP SP2

    - by waanders
    I've installed Windows XP SP2 on a computer (there was not SP at all). Now the display settings are set back to 640x480 and 4 bits colors. And I can't change it, it's the only option in Settings tab of the Display dialog of Windows. The screen look awful now, how can I solve this problem? UPDATE: Seems to be a problem with the video driver (thanks @Karan and @Hennes). I did run Speccy (PC-Wizard freezes the computer) and this is a part of the log file: Summary Operating System Microsoft Windows XP Professional 32-bit SP3 CPU Intel Celeron Willamette 0.18um Technology RAM 512 MB DDR @ 133MHz (2.5-3-3-6) Motherboard COMPAQ 0838h (FC-478) Graphics Standard Monitor (640x480@1Hz) Hard Drives 19.0GB Maxtor 2B020H1 (PATA) Optical Drives No optical disk drives detected Audio No audio card detected ... Graphics Monitor Name Standard Monitor on Current Resolution 640x480 pixels Work Resolution 640x450 pixels State enabled, primary Monitor Width 640 Monitor Height 480 Monitor BPP 4 bits per pixel Monitor Frequency 1 Hz Device \\.\DISPLAY1 OpenGL Version 1.1.0 Vendor Microsoft Corporation Renderer GDI Generic GLU Version 1.2.2.0 Microsoft Corporation Values GL_MAX_LIGHTS 8 GL_MAX_TEXTURE_SIZE 1024 GL_MAX_TEXTURE_STACK_DEPTH 10 GL Extensions GL_WIN_swap_hint GL_EXT_bgra GL_EXT_paletted_texture GL_EXT_bgra

    Read the article

  • New build won't boot: some fans turning, no beep or video

    - by Dave
    When my new system is powered up, the case fan and power supply fans turn fine. The CPU fan twitches, but never gets going. Although I've heard that with AMDs and Gigabyte motherboards that is not necessary a problem. Hard drive is spinning. However, there is absolutely no indication that anything else is happening. The motherboard, as far as I can tell, does not have an internal speaker, but I harvested one from another machine and plugged it in and still no beeps at all. The monitor screen stays black, on both the integrated VGA and DVI. This is a brand new build, and has never successfully booted. My parts are: AMD Athlon II X2 245 Regor 2.9GHz Socket AM3 65W Dual-Core Processor Model ADX245OCGQBOX - includes CPU cooler) GIGABYTE GA-MA785GPMT-UD2H AM3 AMD 785G HDMI Micro ATX AMD Motherboard - Retail G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL8D-4GBRM - Retail CORSAIR CMPSU-400CX 400W ATX12V V2.2 80 PLUS Certified Compatible with Core i7 Power Supply - Retail SAMSUNG Spinpoint F3 HD502HJ 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive COOLER MASTER Elite 341 RC-341C-KKN1-GP Black Steel MicroATX Mid Tower Computer Case - Retail I also have a DVD burner, but it acts the same whether that is plugged in or not. I'm using the on board video. What I've tried so far: I've switched power supplies, with no difference. I've tried different monitors (of which all are working on other machines) with no difference. I have tried putting it one memory module at a time, with no difference. I have tried the absolute minimum I can think of (power supply into motherboard, power button ONLY plugged into front panel, CPU fan plugged in), with no difference. I appreciate any ideas anyone might have. Do I need to RMA the motherboard? This is my first build, so there might be something obvious. I was very careful in assembly with static; I'm confident nothing was zapped during assembly.

    Read the article

  • No video signal at boot with custom built computer

    - by Bart Pelle
    After booting my custom built computer, neither the VGA nor the HDMI methods from the video card seem to emit any signal to the display. I have tested both a regular VGA screen and a modern HDMI screen. Both did not receive signal. Below are the specifications from my computer build: Intel Core i5 3350P ASRock B75 Pro 3-M Seagate Barracuda 7200.14 ST1000 DM003 1000GB Corsair Vengeance LP CML 8GX 3M2 A1600 CGB Blue (2 cards) Cooler Master B Series B600 Club 3D Radeon HD7870 XT Jokercard Samsung SH-224 BB Black Sharkoon T28 Case The motherboard does not emit any beeps on startup. The CD tray opens properly and all fans spin. All cables are properly connected. All components are new and no damage was found on any of the components. The fans on the GPU spin aswell. The VGA test we did was by using the onboard graphics from the Intel i5, but this gave no result. The HDMI test was from the GPU which did not emit any signal either. We have not been able to test out the DVI, could this be important to test, even though all the other methods did not work? Thank you for your time and hopefully reply.

    Read the article

  • How to share text, pictures and video to restricted set of users

    - by joaoc
    I want to share pictures and videos of my kid growing up but I don't want it to be open to the public. I just want me and my wife to be able to add material and then share with grandparents and friends who would be given a username/password or some other solution that authenticates them. This content would preferably be available remotely over the internet or downloaded periodically to the allowed viewers computers. The second option most likely means they would have to install a client, which I am not too fond of doing (I would have to ask them to install it, help configure for different platforms, ...) I'm at the start but I would like software that also allows export of the data (if one day I want to migrate to a different solution). Folder sharing I don't know if Windows folder sharing is reliable, robust and safe enough to share over the internet. Dropbox could be a software solution, but it's limited to 2GB and requires receivers to also install and configure software. A folder is just a collection of files, so it would be harder to keep them organized with text describing the pictures/video Email I could email the content every now and then but videos are almost always too big to go as attachments This would also not provide a history of updates to anyone just recently joining in Are there other solutions to achieve this? NOTE: I also thought that software to run a local or remote blog could be an option but we aren't allowed to ask those questions on superuser because one admin doesn't like cloud-computing questions. But if you do think it's the best approach and can suggest a solution, do state it in the answers anyway!

    Read the article

  • No audio with streaming video

    - by Chris Barnhill
    I am having trouble with audio when playing streaming videos. My sound card is fine. I know this because if I play sounds from my local machine, there's no problem. It's only when I try to play sounds from the internet that I lose audio. This only started happening recently when I did 2 things: I connected a USB headphone/microphone set to record screencasts I began recording/publishing screencasts from screenr.com. I have tried playing video both with the headset connected and without it connected: it makes no difference. If I record a screencast on screenr.com and preview it, I hear the audio. But once I publish is and play it, there is no audio. I also hear no audio with YouTube videos. I really hope someone can help. Thanks. The latest is that the problem went away after I powered my system off and on. A reboot didn't do it, I had to actually shut down the power.

    Read the article

  • Gigabyte H55N-USB3: No video on HDMI

    - by newt
    I built a new PC with a Gigabyte H55N-USB3 / Intel Core i5 650. With a monitor plugged in the DVI port, everything works fine. I installed Windows 7 32-bit and enabled remote desktop connection. After that, I unplugged the monitor, plugged it into network and installed everything else (drivers, programs, etc) via RDP. However, when I try to use the HDMI port on my TV nothing appears. Neither during the boot, neither after Windows starts. The TV says there's "no signal" (if I remove the cable the message changes to "check cable"). The cable is new, and it is working fine with my home theater on same TV (by the way, it is the cable which came bundled with the home theater). Video driver is the latest from Intel site. Anyway, this shouldn't be the problem since there is no image during the boot. Any ideas or tips would be welcome. I'm googling around but found nothing useful, yet.

    Read the article

  • Run 3 monitors on two different video cards?

    - by hullot
    Can I run 3 monitors on two different video cards? I have an ATI and Nvidia brand card. The ATI has 2 HDMI connections. They both work. Both cards are also picked up in Windows, one being the ATI and the other one as the Nvidia, but it says VGA Controller, although the card only takes 2 DVi. So, one DVI cable goes into that Nvidia card. 3 Monitors, but only 2 the HDMI ones from the ATI pick up, not the third one which is connected to the Nvidia via DVI. How can I run three monitors then? I suppose I can't install both drivers, so I'm unsure what to do. Is this possible? I just want the Nvidia card to power the third screen, no gaming on it, nothing. Also the ATI is picked up as primary card as well, so no hurdle there. EDIT: Hm, just installed the Nvidia drivers and it picked up the third screen no problem. Hope there aren't any major conflicts. Will post this as an answer as correct when I'm able. Can't as a new user.

    Read the article

  • OpenCV Video capture and fps problem

    - by Andrea Girardi
    Hi to all, I'm capturing video from my webcam using OpenCV on MacOSX. It works fine but when I try to play on QuickTime my captured video it plays too fast. i.e. I capture from camera for 10 seconds but when I play on QuickTime the video is 2 seconds. I've tried to change fps from 25 to 10 and It's works quite fine, but I'm sure it's not the correct process: CvVideoWriter *writer = 0; int isColor = 1; int fps = 25; int frameW = 640; // 744 for firewire cameras int frameH = 480; // 480 for firewire cameras The problem is that for now I've to capture with WebCam but the real pourpose of program is to capture image from any external source connected to my Mac. I'm using this code to capture: for (;;) { cvGrabFrame(capture) image = cvRetrieveFrame(capture); cvWriteFrame( writer, image ); } Any hint? I'm also showing webcam output on cvNamedWindow, how can I improve quality in this windows? thanks a lot to all! Andrea!

    Read the article

  • Why is my Android app camera preview running out of memory on my AVD?

    - by Bryan
    I have yet to try this on an actual device, but expect similar results. Anyway, long story short, whenever I run my app on the emulator, it crashes due to an out of memory exception. My code really is essentially the same as the camera preview API demo from google, which runs perfectly fine. The only file in the app (that I created/use) is as below- package berbst.musicReader; import java.io.IOException; import android.app.Activity; import android.content.Context; import android.hardware.Camera; import android.os.Bundle; import android.view.SurfaceHolder; import android.view.SurfaceView; /********************************* * Music Reader v.0001 * Still VERY under construction. * @author Bryan * *********************************/ public class MusicReader extends Activity { private MainScreen main; @Override //Begin activity public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); main = new MainScreen(this); setContentView(main); } class MainScreen extends SurfaceView implements SurfaceHolder.Callback { SurfaceHolder sHolder; Camera cam; MainScreen(Context context) { super(context); //Set up SurfaceHolder sHolder = getHolder(); sHolder.addCallback(this); sHolder.setType(SurfaceHolder.SURFACE_TYPE_PUSH_BUFFERS); } public void surfaceCreated(SurfaceHolder holder) { // Open the camera and start viewing cam = Camera.open(); try { cam.setPreviewDisplay(holder); } catch (IOException exception) { cam.release(); cam = null; } } public void surfaceDestroyed(SurfaceHolder holder) { // Kill all our crap with the surface cam.stopPreview(); cam.release(); cam = null; } public void surfaceChanged(SurfaceHolder holder, int format, int w, int h) { // Modify parameters to match size. Camera.Parameters params = cam.getParameters(); params.setPreviewSize(w, h); cam.setParameters(params); cam.startPreview(); } } }

    Read the article

  • Facial recognition/detection PHP or software for photo and video galleries

    - by Peter
    I have a very large photo gallery with thousands of similar people, objects, locations, things. The majority of the people in the photos have their own user accounts and avatar photos to match. There are also logical short lists of people potentially in the photo based on additional data available for each photo. I allow users to tag photos with their friends and people they know but an automated process would be better. I've used photo tagger/finder from face.com integrating with Facebook photos and the Google Picasa photo tagger for personal albums also does the same thing and is exactly what I'm looking to do. Is there a PHP script, API for Google Picasa, face.com or other recognition service or any other open source project that provides server-side facial recognition and/or grouping photos by similarity? Examples: As you can see, various photo sharing sites offer the feature, but are there any that provide an API for images stored on my own server or something extensive enough to link into my own gallery and tagging system? viewdle - Face recognition/Tagging for video PHP - Face detection in pure PHP Xarg OpenCV Face.com - app for finding and tagging photos in Facebook Google Picasa - photo sharing TeraSnaps - photo sharing site Google Portrait - photo grouping from Google Image results FaceOnIt - Video face recognition PittPatt - Detection, Recognition, Video Face Mining BetaFace ChaosFace - Real-time Face Detector

    Read the article

  • Stretch video to full screen in a SurfaceView extension

    - by SS
    I have created a widget that is an extension of SurfaceView (very similar to [VideoView][1]) and I am working on a feature to stretch the video fully across the device screen when certain action is taken. I've looked at onMeasure function of VideoView and re-wrote it this way: @Override protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) { if (mStretchVideo) { super.onMeasure(widthMeasureSpec, heightMeasureSpec); } else { int width = getDefaultSize(mVideoWidth, widthMeasureSpec); int height = getDefaultSize(mVideoHeight, heightMeasureSpec); if (mVideoWidth > 0 && mVideoHeight > 0) { if (mVideoWidth * height > width * mVideoHeight) { height = width * mVideoHeight / mVideoWidth; } else if (mVideoWidth * height < width * mVideoHeight) { width = height * mVideoWidth / mVideoHeight; } } setMeasuredDimension(width, height); } } This seems to work fine if I completely stop the video and start playing again. Now I am trying to force the refresh of this SurfaceView after setting the stretch flag so that the video gets stretched while it is playing, but I couldn't figure out how to force a refresh on SurfaceView. I tried android.view.View.invalidate(), android.view.View.refreshDrawableState() and calling android.view.View.measure(int, int) directly with different combinations but did not get any success. Any ideas?

    Read the article

  • How to record video in iphone

    - by Timmi
    HI, I need to record video using iPhone. To do that i used UIImagePickerController. I have an iPhone 3G, with me. when i run my code to check if source type available it says device not supported. My OS is 3.2.1, where i am wrong, can some one tell me what i need to change. Also is there some other way to record video. What i need to do is to get the video stream as it is recorded. UIImagePickerController *picker = [[UIImagePickerController alloc] init]; picker.delegate = self; NSArray *sourceTypes = [UIImagePickerController availableMediaTypesForSourceType:picker.sourceType]; if (![sourceTypes containsObject:(NSString *)kUTTypeVideo ]){ NSLog(@"device not supported"); return; } //picker.allowsEditing = YES; picker.sourceType = UIImagePickerControllerSourceTypeCamera; picker.mediaTypes = [NSArray arrayWithObject:(NSString *)kUTTypeVideo]; picker.videoQuality = UIImagePickerControllerQualityTypeHigh; [self presentModalViewController:picker animated:YES]; Thanks,

    Read the article

  • Playing video and audio in iPhone not working...

    - by Scott
    So we have buttons linked up to display images/videos/audio on click depending on a check we do earlier. That part works fine. It knows which one to play, however, when we click the buttons for video and audio, nothing happens. The image one works fine. The video and audio are being taken for a URL online, they are not local, but everywhere said this was still possible. Here is a little snippet of the code where we play the two files: if ( [fName hasSuffix:@".png"]) { NSLog(@"PICTURE"); NSURL *url = [NSURL URLWithString: fName]; UIImage *image = [UIImage imageWithData: [NSData dataWithContentsOfURL:url]]; self.view = [[UIView alloc] initWithFrame:[[UIScreen mainScreen] applicationFrame]]; // self.view.backgroundColor = [[UIColor alloc] initWithPatternImage:[UIImage imageNamed:@"MainBG.jpg"]]; [self.view addSubview:[[UIImageView alloc] initWithImage:image]]; } if ( [fName hasSuffix:@".mp4"]) { NSLog(@"VIDEO"); //NSString *path = [[NSBundle mainBundle] pathForResource:fName ofType:@"mp4"]; //NSLog(path); NSURL *url = [NSURL fileURLWithPath:fName]; MPMoviePlayerController *player = [[MPMoviePlayerController alloc] initWithContentURL:url]; [player play]; } if ( [fName hasSuffix:@".mp3"]) { NSLog(@"AUDIO"); NSURL *url = [NSURL fileURLWithPath:fName]; NSData *soundData = [NSData dataWithContentsOfURL:url]; AVAudioPlayer *avPlayer = [[AVAudioPlayer alloc] initWithData:soundData error: nil]; [avPlayer play]; } See anything wrong? By the way it compiles and runs, but nothing happens when we hit the button that executes that code.

    Read the article

  • How can I create photo effects in Android?

    - by PaulH
    I'd like to make an Android app that lets a user apply cool effects to photos taken with the camera. There are already a few out there, I know, but I'd like to try my own hand at one. I'm trying to figure out the best way to implement these effects. Here are some examples from the excellent Vignette app (which I own): http://www.flickr.com/groups/vignetteforandroid/pool/ I have been googling and stack-overflowing, but so far I've mostly found some references to published papers or books. I am ordering this one from Amazon presently - Digital Image Processing: An Algorithmic Introduction using Java After some reading, I think I have a basic understanding of manipulating the RGB values for all the pixels in the image. My main question is how do I come up with a transformation that produces cool effects? By cool effects I mean some like those in the Vignette app or IPhone apps: ToyCamera Polarize I already have quite a bit of experience with Java, and I've made my first app for android already. Any ideas? Thanks in advance.

    Read the article

  • Youtube video on load through Jquery/JS

    - by jonthecoder2346
    My goal is to display a youtube video through a javascript function that will read the embedded code and load the video automatically in the div assigned. But I am not getting anything shown in the div assigned for the video. Is it because it has to be triggered by a button click? <script type="text/javascript"> var last_cnad_text_1 = ''; var options_cnad_text_1 = { embedMethod:'fill', maxWidth:320, maxHeight: 320 }; function loadVideo() { val = $('#cnad_text_1').val(); if ( val != '' && val != last_cnad_text_1 ) { last_cnad_text_1 = val; $("#embed_cnad_text_1").oembed(val,options_cnad_text_1); } } $(function(){ $('#cnad_text_1').keydown(loadVideo()); $('#cnad_text_1').click(loadVideo()); $('#cnad_text_1').change(loadVideo()); }); </script> <body> <input id="cnad_text_1" type="text" value="" size="60" name="cnad[text_1]"> <div id="embed_cnad_text_1"></div> </body> </html>

    Read the article

  • youtube video downloaed succesfully on local, but on server(online) only 0 byte flv is downloading

    - by I Like PHP
    i m using php tube class to download youtube video. Video is automatically downloaded in a folder by submitting youtube video url. everything is working fine on local (XAMPP), but when i upload this to server(online), THEN ONLY 0 byte flv file is saved. i also debug the code both side( local and global ). i get the url like this( on local) http://www.youtube.com/get_video?video_id=1jNWCFwqPvM&=vjVQa1PpcFMyYCECyfmYENWklpwXGyhVgJpSFPgNAEc%3D whereas on server i got link like this http://www.youtube.com/ get_video?video_id=1jNWCFwqPvM&t=vjVQa1PpcFNS3SPxIXi8hy-NF4qZFFrScDXCjGLLrLc%3D when i copy the link getting from local and paste on browser then a download box appear on browser, whereas when i copy the link getting from server and paste on browser then only a blank page appears please solve my problem, where is the error??? how to know that pear is installed or not on server? on server side sometimes i get link like http://www.youtube.com/get_video?video_id=1jNWCFwqPvM&t=vjVQa1PpcFNS3SPxIXi8hy-NF4qZFFrScDXCjGLLrLc%3D but sometimes i get only http://www.youtube.com/get_video?video_id=&t= please guide me how to solve these? Thanks in advance to all my seniors

    Read the article

  • Replace an embed or iframe youtube video by an tumbnail + link to vídeo.

    - by Evel
    I need an javascript that can be placed on header that recognizes an youtube embed or iframe player and replaces it by a tumbnail linked to the vídeo on youtube. The script should identifies an code like this ones: <object width="560" height="340"><param name="movie" value="http://www.youtube.com/v/J4oJWUJpbLY?fs=1&amp;hl=pt_BR&amp;hd=1&amp;color1=0x5d1719&amp;color2=0xcd311b"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/J4oJWUJpbLY?fs=1&amp;hl=pt_BR&amp;hd=1&amp;color1=0x5d1719&amp;color2=0xcd311b" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="560" height="340"></embed></object> <iframe title="YouTube video player" class="youtube-player" type="text/html" width="560" height="345" src="http://www.youtube.com/embed/J4oJWUJpbLY?hd=1" frameborder="0"></iframe> And replace by it: <a href="http://www.youtube.com/watch?v=n1VCUF2xqKk" target="_blank"><img src="http://img.youtube.com/vi/n1VCUF2xqKk/default.jpg" alt="" /></a> Look that the variable is the video ID. It is possible?

    Read the article

  • Fade in and out a div contains video embedHTML in jquery

    - by Ahmy
    I have a div and three links when a link is clicked the div is set its innerHTML with an embedHTML of video and i need to cause some effects when the current div video is changed on clicking the link Example : <a id="Link1" onClick="ChangeVideo(1)">Link1</a> <a id="Link2" onClick="ChangeVideo(2)">Link2</a> <a id="Link3" onClick="ChangeVideo(3)">Link3</a> <div id="CurrVideo"></div> <script type="text/javascript" language="javascript"> //The ArrEmbed is an array that is set on the load of the page:: var ArrEmbed = new Array(); function ChangeVideo(index) { $('#CurrVideo).fadeTo(1000,0.25,function(){ document.getElementById("CurrVideo").innerHTML = ArrEmbed[index-1]; }); $('#CurrVideo).fadeTo(500,1.25); } </script> The effect is not noticeable and fading with opacity diminshing is not noticed even if the duration time is increased (e.g. 'slow') and when i replace the EmbedHTML with image this code is applicable and the effect of fading is noticed but with the video it is not noticeable so how can i solve this problem ? Thanks in advance for any try Note: The embedHTML differ as it may come from youtube or any server or from my JWPlayer.

    Read the article

  • Vertical Scrolling In Tile Based XNA Platformer

    - by alec100_94
    I'm making a 2D platformer in XNA 4.0. I have created a working tile engine, which works well for my purposes, and Horizontal Scrolling works flawlessly, however I am having great trouble with Vertical scrolling. I Basically want the camera to scroll up (world to scroll down) when the player reaches a certain Y co-ordinate, and I would also like to automatically scroll back down if coming down, and that co-ordinate is passed. My biggest problem is I have no real way of detecting the direction the player is moving in using only the Y Co-ord. Here Is My Code Code For The Camera Class (which appears to be a very different approach to most camera classes I have seen). using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.Xna.Framework; namespace Marvin { class Camera : TileEngine { public static bool startReached; public static bool endReached; public static void MoveRight(float speed = 2) { //Moves The Position of Each Tile Right foreach (Tile t in tiles) { if(t!=null) { t.position.X -= speed; } } } public static void MoveLeft(float speed = 2) { //Moves The Position of Each Tile Right foreach (Tile t in tiles) { if(t!=null) { t.position.X += speed; } } } public static void MoveUp(float speed = 2) { foreach (Tile t in tiles) { if(t!=null) { t.position.Y += speed; } } } public static void MoveDown(float speed = 2) { foreach (Tile t in tiles) { if(t!=null) { t.position.Y -= speed; } } } public static void Restrain() { if(tiles.Last().position.X<Main.graphics.PreferredBackBufferWidth-tiles.Last().size.X) { MoveLeft(); endReached = true; } else { endReached = false; } if(tiles[1].position.X>0) { MoveRight(); startReached = true;} else { startReached = false; } } } } Here is My Player Code for Left and Right Scrolling/Moving if (Main.currentKeyState.IsKeyDown(Keys.Right)) { Camera.MoveRight(); if(Camera.endReached) { MoveRight(2); } else { if(marvin.GetRectangle().X!=Main.graphics.PreferredBackBufferWidth-(marvin.GetRectangle().X+marvin.GetRectangle().Width)) { MoveRight(2); Camera.MoveLeft(); } } } if(Main.currentKeyState.IsKeyDown(Keys.Left)) { Camera.MoveLeft(); if(Camera.startReached) { MoveLeft(2); } else { if(marvin.GetRectangle().X!=Main.graphics.PreferredBackBufferWidth-(marvin.GetRectangle().X+marvin.GetRectangle().Width)) { MoveLeft(2); Camera.MoveRight(); } } } Camera.Restrain(); if(marvin.GetRectangle().X>Main.graphics.PreferredBackBufferWidth-marvin.GetRectangle().Width) { MoveLeft(2); } if(marvin.GetRectangle().X<0) { MoveRight(2); } And Here Is My Player Jumping/Falling Code which may cause some conflicts with the vertical camera movement. if (!jumping) { if(!TileEngine.TopOfTileCollidingWith(footBounds)) { MoveDown(5); } else { if(marvin.GetRectangle().Y != TileEngine.LastPlatformStoodOnTop()-marvin.GetRectangle().Height) { float difference = (TileEngine.LastPlatformStoodOnTop()-marvin.GetRectangle().Height) - (marvin.GetRectangle().Y); marvin.SetRectangle(marvin.GetRectangle().X,(int)(marvin.GetRectangle().Y+difference)); armR.SetRectangle(armR.GetRectangle().X,(int)(armR.GetRectangle().Y+difference)); armL.SetRectangle(armL.GetRectangle().X,(int)(armL.GetRectangle().Y+difference)); eyeL.SetRectangle(eyeL.GetRectangle().X,(int)(eyeL.GetRectangle().Y+difference)); eyeR.SetRectangle(eyeR.GetRectangle().X,(int)(eyeR.GetRectangle().Y+difference)); } } } if (Main.currentKeyState.IsKeyDown(Keys.Up) && Main.previousKeyState.IsKeyUp(Keys.Up) && TileEngine.TopOfTileCollidingWith(footBounds)) { jumping = true; } if(jumping) { if(TileEngine.LastPlatformStoodOnTop()>0 && (TileEngine.LastPlatformStoodOnTop() - footBounds.Bottom)<120) { MoveUp(5); } else { jumping = false; } } All player code I have tried for vertical movements has failed, or caused weird results (like falling through platforms), and most have been a variation on the method I described above, hence I have not included it. I would really appreciate some help implementing a simple vertical scrolling into this game, Thanks.

    Read the article

  • django/python: is one view that handles two sibling models a good idea?

    - by clime
    I am using django multi-table inheritance: Video and Image are models derived from Media. I have implemented two views: video_list and image_list, which are just proxies to media_list. media_list returns images or videos (based on input parameter model) for a certain object, which can be of type Event, Member, or Crag. The view alters its behaviour based on input parameter action (better name would be mode), which can be of value "edit" or "view". The problem is that I need to ask whether the input parameter model contains Video or Image in media_list so that I can do the right thing. Similar condition is also in helper method media_edit_list that is called from the view. I don't particularly like it but the only alternative I can think of is to have separate (but almost the same) logic for video_list and image_list and then probably also separate helper methods for videos and images: video_edit_list, image_edit_list, video_view_list, image_view_list. So four functions instead of just two. That I like even less because the video functions would be very similar to the respective image functions. What do you recommend? Here is extract of relevant parts: http://pastebin.com/07t4bdza. I'll also paste the code here: #urls url(r'^media/images/(?P<rel_model_tag>(event|member|crag))/(?P<rel_object_id>\d+)/(?P<action>(view|edit))/$', views.image_list, name='image-list') url(r'^media/videos/(?P<rel_model_tag>(event|member|crag))/(?P<rel_object_id>\d+)/(?P<action>(view|edit))/$', views.video_list, name='video-list') #views def image_list(request, rel_model_tag, rel_object_id, mode): return media_list(request, Image, rel_model_tag, rel_object_id, mode) def video_list(request, rel_model_tag, rel_object_id, mode): return media_list(request, Video, rel_model_tag, rel_object_id, mode) def media_list(request, model, rel_model_tag, rel_object_id, mode): rel_model = tag_to_model(rel_model_tag) rel_object = get_object_or_404(rel_model, pk=rel_object_id) if model == Image: star_media = rel_object.star_image else: star_media = rel_object.star_video filter_params = {} if rel_model == Event: filter_params['event'] = rel_object_id elif rel_model == Member: filter_params['members'] = rel_object_id elif rel_model == Crag: filter_params['crag'] = rel_object_id media_list = model.objects.filter(~Q(id=star_media.id)).filter(**filter_params).order_by('date_added').all() context = { 'media_list': media_list, 'star_media': star_media, } if mode == 'edit': return media_edit_list(request, model, rel_model_tag, rel_object_id, context) return media_view_list(request, model, rel_model_tag, rel_object_id, context) def media_view_list(request, model, rel_model_tag, rel_object_id, context): if request.is_ajax(): context['base_template'] = 'boxes/base-lite.html' return render(request, 'media/list-items.html', context) def media_edit_list(request, model, rel_model_tag, rel_object_id, context): if model == Image: get_media_edit_record = get_image_edit_record else: get_media_edit_record = get_video_edit_record media_list = [get_media_edit_record(media, rel_model_tag, rel_object_id) for media in context['media_list']] if context['star_media']: star_media = get_media_edit_record(context['star_media'], rel_model_tag, rel_object_id) else: star_media = None json = simplejson.dumps({ 'star_media': star_media, 'media_list': media_list, }) return HttpResponse(json, content_type=json_response_mimetype(request)) def get_image_edit_record(image, rel_model_tag, rel_object_id): record = { 'url': image.image.url, 'name': image.title or image.filename, 'type': mimetypes.guess_type(image.image.path)[0] or 'image/png', 'thumbnailUrl': image.thumbnail_2.url, 'size': image.image.size, 'id': image.id, 'media_id': image.media_ptr.id, 'starUrl':reverse('image-star', kwargs={'image_id': image.id, 'rel_model_tag': rel_model_tag, 'rel_object_id': rel_object_id}), } return record def get_video_edit_record(video, rel_model_tag, rel_object_id): record = { 'url': video.embed_url, 'name': video.title or video.url, 'type': None, 'thumbnailUrl': video.thumbnail_2.url, 'size': None, 'id': video.id, 'media_id': video.media_ptr.id, 'starUrl': reverse('video-star', kwargs={'video_id': video.id, 'rel_model_tag': rel_model_tag, 'rel_object_id': rel_object_id}), } return record # models class Media(models.Model, WebModel): title = models.CharField('title', max_length=128, default='', db_index=True, blank=True) event = models.ForeignKey(Event, null=True, default=None, blank=True) crag = models.ForeignKey(Crag, null=True, default=None, blank=True) members = models.ManyToManyField(Member, blank=True) added_by = models.ForeignKey(Member, related_name='added_images') date_added = models.DateTimeField('date added', auto_now_add=True, null=True, default=None, editable=False) class Image(Media): image = ProcessedImageField(upload_to='uploads', processors=[ResizeToFit(width=1024, height=1024, upscale=False)], format='JPEG', options={'quality': 75}) thumbnail_1 = ImageSpecField(source='image', processors=[SmartResize(width=178, height=134)], format='JPEG', options={'quality': 75}) thumbnail_2 = ImageSpecField(source='image', #processors=[SmartResize(width=256, height=192)], processors=[ResizeToFit(height=164)], format='JPEG', options={'quality': 75}) class Video(Media): url = models.URLField('url', max_length=256, default='') embed_url = models.URLField('embed url', max_length=256, default='', blank=True) author = models.CharField('author', max_length=64, default='', blank=True) thumbnail = ProcessedImageField(upload_to='uploads', processors=[ResizeToFit(width=1024, height=1024, upscale=False)], format='JPEG', options={'quality': 75}, null=True, default=None, blank=True) thumbnail_1 = ImageSpecField(source='thumbnail', processors=[SmartResize(width=178, height=134)], format='JPEG', options={'quality': 75}) thumbnail_2 = ImageSpecField(source='thumbnail', #processors=[SmartResize(width=256, height=192)], processors=[ResizeToFit(height=164)], format='JPEG', options={'quality': 75}) class Crag(models.Model, WebModel): name = models.CharField('name', max_length=64, default='', db_index=True) normalized_name = models.CharField('normalized name', max_length=64, default='', editable=False) type = models.IntegerField('crag type', null=True, default=None, choices=crag_types) description = models.TextField('description', default='', blank=True) country = models.ForeignKey('country', null=True, default=None) #TODO: make this not null when db enables it latitude = models.FloatField('latitude', null=True, default=None) longitude = models.FloatField('longitude', null=True, default=None) location_index = FixedCharField('location index', length=24, default='', editable=False, db_index=True) # handled by db, used for marker clustering added_by = models.ForeignKey('member', null=True, default=None) #route_count = models.IntegerField('route count', null=True, default=None, editable=False) date_created = models.DateTimeField('date created', auto_now_add=True, null=True, default=None, editable=False) last_modified = models.DateTimeField('last modified', auto_now=True, null=True, default=None, editable=False) star_image = models.ForeignKey('Image', null=True, default=None, related_name='star_crags', on_delete=models.SET_NULL) star_video = models.ForeignKey('Video', null=True, default=None, related_name='star_crags', on_delete=models.SET_NULL)

    Read the article

  • MP4 plays on Safari 4 (desktop) but not on Safari Mobile (iphone)

    - by deb
    I'm encoding the video with ffmpeg and displaying it using the HTML 5 video tag. It works fine on Firefox (i'm also providing a ogg version) and Safari 4. However, when I try to open it on the iphone I get a "Cannot Play Movie" error. Here is the ffmpeg command I'm using: ffmpeg -y -i movie.mov -acodec libfaac -ar 44100 -ab 96k -vcodec libx264 -vpre hq -level 41 -crf 20 -bufsize 20000k -maxrate 1500k -g 250 -s 320X200 -coder 1 -flags +loop -cmp +chroma -partitions +parti4x4+partp8x8+partb8x8 -flags2 +dct8x8+bpyramid -me_method umh -subq 7 -me_range 16 -keyint_min 25 -sc_threshold 40 -i_qfactor 0.71 -rc_eq 'blurCplx^(1-qComp)' -bf 16 -b_strategy 1 -bidir_refine 1 -refs 6 -deblockalpha 0 -deblockbeta 0 movie.mp4 I reduced the maxrate to 1500 because I read that if the bit rate is too high the iphone won't play the video, but still didn't work. I don't know where else to look... any ideas? Thanks in advance

    Read the article

  • sd card folder is not being created in DDMS

    - by Abhijeet
    hi everyone , I am new to android. I intend to make video player which can play video from file as well as web URL. But the problem is that when my emulator runs , a sd card folder should be created in "File Explorer" tab of DDMS perspective in eclipse , which is not happening . That's why I am unable to push any file in the sd card and hence video is not being played. I have used following code :- check it out the link http://davanum.wordpress.com/2009/12/04/android-%E2%80%93-videomusic-player-sample-take-2/ Please help me out. Abhijeet

    Read the article

  • sd card folder is not being created in DDMS

    - by Abhijeet
    hi everyone , I am new to android. I intend to make video player which can play video from file as well as web URL. But the problem is that when my emulator runs , a sd card folder should be created in "File Explorer" tab of DDMS perspective in eclipse , which is not happening . That's why I am unable to push any file in the sd card and hence video is not being played. I have used followed this code :- check it out the link http://davanum.wordpress.com/2009/12/04/android-%E2%80%93-videomusic-player-sample-take-2/ Please help me out. Abhijeet

    Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >