Search Results

Search found 11903 results on 477 pages for 'ip forwarding'.

Page 125/477 | < Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >

  • how to set up domain name, bad request invalid hostname

    - by user45645
    assume i have a domain name which will be forwarded to my public ip (web server) automatically. in IIS 6, ip is public ip port is 6666, advanced - host value is www.hello.com firewall is open for 6666(web server port) and 53(DNS port), DMZ of router is my physical address in DNS, i have already had a zone called oldhello.com. And i expect a new domain name. So i have addded a new zone called hello.com and checked SOA server (P) is one.hello.local. then added a new host called one, full name is one.hello.com, ip address 192.168.7.3(my address in router) and then add a alias(CNAME) www, full name is www.hello.com, FQDN i choose the host i added before (one.hello.com) i expected that when i type the public ip in browser, can it be changed to domain name automatically. if not set host value www.hello.com, use public ip i can see the web however, after set up host value www.hello.com, browser show bad request invalid hostname

    Read the article

  • NAT : understanding about interconnection

    - by PITCHY
    English version below J'ai 2 routeurs A et B relié en série avec les ip respectives ( 10.0.0.1/30 10.0.0.2/30) sur le routeur A j'ai activé la fonction NAT avec un pool (200.0.0.1 - 200.0.0.15/28). Lorsque je sors je prends donc un ip du pool par exemple 200.0.0.10. Comment ça fonctionne sachant que ma nouvelle ip (200.0.0.10) ne se trouve pas sur le meme réseau que mon interface de destination (10.0.0.2)? English: I have 2 routers A and B, interconnected with a serial connection, with the ip's 10.0.0.1/30 for A and 10.0.0.2/30 for B. On router A NAT was activated with the pool 200.0.0.1 - 200.0.0.15/28. When connection to this router, I get an ip from the pool, for example 200.0.0.10. Knowing my new ip is 200.0.0.10, which is not on the same network as my destination interface (10.0.0.2), how can this work?

    Read the article

  • IIS6 can't find site on local network

    - by chezy525
    I have a windows 2003 server with dual NICs running IIS6. I can access everything remotely, but the internal network can't seem to find the site regardless of which IP Address I try to go to. There are really several weird things that are happening here, but I'm going to limit this question to what I'm guessing to be the simplest problem (the solution to which I'm hoping solves other things as well): From the server itself, I can access the webpage using the primary IP address (i.e. http://192.168.1.2/index.htm), but not using the secondary IP address (i.e. http://10.10.10.2/index.htm). Self pinging both IP addresses works, and the "Web site identification" in IIS has the IP address set to "(All Unassigned)"... which I believe should bind both IP addresses to this site. I apologize if I'm not providing enough details about my setup, but at this point I don't even know what's relevant...

    Read the article

  • Routing between two networks on linux?

    - by gGololicic
    I got stuck with one problem I cant find solution. I have linux pc with two NIC. first nic (eth1) is connected to public ip (probably switch or whatever, doesnt really mater) so eth1 is connected to wan and another eth0 that I connected to switch and make it a lan nic. configuration: eth1 ip address 88.200.1xx.xxx //xxx's are cuz of security reasons eth0 ip address 192.168.1.1 wan ------ [eth1 (linux PC) eth0]<----[switch]<---- [eth1 (PC1)] Now I want to connect this two networks, so PC1 can access linux PC and wan. I think I know how to do it but I cant confiugre it right. This is what I tried: I turend on ip forwarding (for sure) I set eth1 default gw to the right ip on the wan I tried to set eth0 default gw to the same ip (but i couldnt) What or how can I do this, I was trying with linux route command, but I got stuck. Please help.

    Read the article

  • Lynksys WRT120N wireless router not connecting to ADSL

    - by pradeetp
    I have a lynksys WRT120N wireless router that was connected to Sterlite ADSL modem. The internet connection was working fine through wireless access. I changed the ADSL router because it developed some power issues and got it replaced with the same model/brand from the service provider. However I am not able to access internet now. Here is the current setting Sterlite SAM300 XA IP Address: 192.168.2.1 (I changed it to this IP because the IP address of my ADSL router was same) Lynksys WRT120N wireless router IP Address: 192.168.1.1 If I connect my laptop to ADSL router directly, the internet works fine. It is only that that if I access it wirelessley through wireless router that I am not able to connect to internet. The IP address setting has been configured to obtain IP address automatically. I have windows 7 OS home edition. Could someone please help me to fix this issue.

    Read the article

  • HTTPS subdomain does not load site under HTTP

    - by Mark Lawrence
    I recently installed an SSL certificate on a subdomain following the steps at cPanel. Lets just say the domain is example.com and the subdomain is sub.example.com. I updated the userdata file for the subdomain and changed the IP address to the IP I wanted to use I updated the example.com zone file and changed the IP for the A Name for the subdomain to the IP I wanted to use Using domain tools I checked that sub.example.com resolved to the new IP which it does. I then installed an SSL certificate on example.com and then on sub.example.com When I visit http://sub.example.com I get the default Apache account screen, and when I visit https://sub.example.com I get the cPanel 404 page. If however I enter https://sub.example.com/admin (the location of my admin section) the page loads and I can login. I thought that this might be a propagation issue however as the subdomain resolves to the IP and I can reach the admin page I suspect it is not a propagation issue and possibly an incorrect zone file. Any thoughts?

    Read the article

  • How do I set up pairing email addresses?

    - by James A. Rosen
    Our team uses the Ruby gem hitch to manage pairing. You set it up with a group email address (e.g. [email protected]) and then tell it who is pairing: $ hitch james tiffany Hitch then sets your Git author configuration so that our commits look like commit 629dbd4739eaa91a720dd432c7a8e6e1a511cb2d Author: James and Tiffany <[email protected]> Date: Thu Oct 31 13:59:05 2013 -0700 Unfortunately, we've only been able to come up with two options: [email protected] doesn't exist. The downside is that if Travis CI tries to notify us that we broke the build, we don't see it. [email protected] does exist and forwards to all the developers. Now the downside is that everyone gets spammed with every broken build by every pair. We have too many possible pair to do any of the following: set up actual [email protected] email addresses or groups (n^2 email addresses) set up forwarding rules for [email protected] (n^2 forwarding rules) set up forwarding rules for [email protected] (n forwarding rules for each of n developers) Does anyone have a system that works for them?

    Read the article

  • Website hosted at home pingable from outside, but not browseable from outside

    - by Richard DesLonde
    I have a simple setup. Server at home has local I.P. 192.168.1.3 IIS is running on the server and the website is up. Windows firewall on the server has an exception rule for port 80 TCP Router has static I.P. XX.XXX.XX.XXX Router is forwarding TCP port 80 to 192.168.1.3 My domain registrar is my DNS host and is pointing to the static I.P. XX.XXX.XX.XXX of the router Here's what I can and can't do. I can browse the website from within my home network either by I.P. or domain name. I can ping the domain and the I.P. from outside the network (from a computer at work). I can't browse the website either by domain name or by I.P. Wierd. Why I can't browse my website? Incidentally, I wasn't sure this question was appropriate for SO, but after finding a few others similar to it on SO, and no comments on those questions saying anything about it being innapropriate, I decided I would post this question. Let me know if this is not appropriate for SO, or is more appropriate for another of the SE websites. Thanks!

    Read the article

  • Using USB to Ethernet with Linux Ubuntu 12.04

    - by Sriram
    Being a newbie, Please excuse if the technical Jargon used is not an universally accepted one :) I have a particular device (say device A) whose USB2.0 driver is available from Linux community. Linux UBUNTU12.04 based PC is able to detect that device via the available driver. My requirement is to ensure that PC can exchange the command as well as data with the device A over TCP/IP packets (In other words, instead of just a USB Based driver, there should be a TCP/IP wrapper over the device USB driver and still does the same job as the USB driver was doing before) Bought an USB (Female) to RJ-45 adapter,connected Device A (male) USB to the USB Female end of the adapter and the Ethernet end connected to the router. PC also is connected to the same router so that both Device A and the PC have the IP address in the same subnet range. So the packets produced by the device A can be routed to the PC via some binding( not sure how I can achieve this, but conceptual idea) Here are the issues I can see as of now 1) USB to RJ-45 is just a hardware signal conversion and not a NIC in itself and hence no MAC/IP ADDRESS assigned. Can we bind a virtual NIC created in PC with this connector? 2) Any available USB TO IP command as well as data translation wrappers available? e.g. command for the device A on Ethernet converted to command for the device A on USB which is then acted upon the device as a command from the USB driver There is some missing link in my understanding and hence it would be of great help if you can bounce off some ideas on how I can take this forward so that Device A and PC exchange data over IP. Thanks and Regards, Sriram

    Read the article

  • Domain changes required for SSL integration

    - by user131003
    Currently my site supports regular payment options (User is taken to Payment Gateway/PG website). Now I'm trying to implement "seamless" PG integration. I need SSL for this. I'm having a dedicated server with 5 static IPs from Hostgator/HG. options: I take SSL for www.my_domain.com. According to HG, I need to change IP of main site as current IP is not really dedicated as it is being shared by cpanel etc. So They need to bind another dedicated IP to main domain for SSL to work. This would required DNS change for main website and hence cause few hours downtime (which is ok). I've noticed that most of the e-commerce websites are using subdomains like secure.my_domain.com for ssl/https. This sounds like a better approach. But I've got few doubts in this case: a) Would I need to re-register with existing PGs (Paypal, Google Checkout, Authorize.net) if I switch to subdomain? Re-registering is not an option for me. b) Would DNS change be required for www.my_domain.com in this case. This confusion arose because of following reply from HG : "If the sub domain secure.my_domain.com is added to an existing cPanel it will use the IP for that cPanel so as long as it is a Dedicated IP that will be fine. If secure.my_domain.com gets setup as its own cPanel it will need to be assigned to a Dedicated IP which would have a DNS change involved.". Please suggest?

    Read the article

  • Cinnamon is broken after upgrade to 13.10

    - by user2306488
    I see reports of people with Unity broken after upgrading to 13.10. In my case Unity works fine but cinnamon is broken. It opens the startup applications but no window manager, no menus and the keyboad shortcuts won't work. As a consequence I can't even log out or shut down cleanly. The logs say: Oct 19 10:32:42 Aveline colord: Profile added: icc-1727cc5030c477b20ad75593e757248d Oct 19 10:32:43 Aveline gnome-session[9157]: WARNING: App 'cinnamon.desktop' exited with code 1 Oct 19 10:32:43 Aveline gnome-session[9157]: WARNING: App 'cinnamon.desktop' respawning too quickly Oct 19 10:32:43 Aveline gnome-session[9157]: CRITICAL: We failed, but the fail whale is dead. Sorry.... Oct 19 10:32:43 Aveline gnome-session[9157]: WARNING: App 'cinnamon.desktop' exited with code 1 Oct 19 10:32:46 Aveline whoopsie[1054]: online Oct 19 10:32:53 whoopsie[1054]: last message repeated 12 times Oct 19 10:32:53 Aveline kernel: [ 1982.637049] python[9626]: segfault at 1511 ip b6c9e850 sp bf8d0980 error 4 in libglib-2.0.so.0.3800.0[b6c5b000+102000] Oct 19 10:32:53 Aveline kernel: [ 1982.837527] python[9631]: segfault at 0 ip b6eb13fa sp b69ff848 error 6 in libdbus-1.so.3.7.4[b6e89000+49000] Oct 19 10:32:54 Aveline kernel: [ 1983.030271] python[9634]: segfault at a6f4098b ip b6e52389 sp bfcdad68 error 4 in libdbus-1.so.3.7.4[b6e34000+49000] Oct 19 10:32:54 Aveline kernel: [ 1983.253259] python[9639]: segfault at 4 ip b6e710f4 sp b69c1bfc error 6 in libdbus-1.so.3.7.4[b6e4b000+49000] Oct 19 10:32:54 Aveline kernel: [ 1983.501771] python[9642]: segfault at b4 ip b6e0f076 sp bf82524c error 4 in libdbus-1.so.3.7.4[b6dfd000+49000] Oct 19 10:32:54 Aveline kernel: [ 1983.721334] python[9647]: segfault at 4 ip b6eab0f4 sp b69fbbfc error 6 in libdbus-1.so.3.7.4[b6e85000+49000] Any idea?

    Read the article

  • How to set up VirtualBox Bridged Network on Windows 7 Host?

    - by Tong Wang
    I have virtualbox running on a Windows 2008 server, with a guest running ubuntu 10.04. The ubuntu guest is given a static IP of 192.168.1.4, which also has openssh installed. The guest has bridged network setup, I can ping 192.168.1.4 from any machine in the LAN, the ubuntu guest can also access the LAN. However, when I try to PuTTY into the ubuntu machine, I always get "connection refused". Below are some setup details: ubuntu IP: 192.168.1.4 hosts.allow sshd : 192.168.1.38 hosts.deny ALL : ALL when I the following command, I can see that sshd is listening on port 22: lsof -i tcp:22 Any idea? EDIT: It turned out to be a wrong VirtualBox Bridged Network setup. I give the Ubuntu guest a static IP of 192.168.1.4 (assigned to eth0). Then in the Windows 7 host, in the Network and Sharing Center, there is a new connection named "VirtualBox Host-Only Network" after the bridge is setup, that connection is again given the same static IP of 192.168.1.4. Once I change the "VirtualBox Host-Only Network" to automatically obtain an IP address, it's getting a different IP address of 169.254.249.70(Tentative). And now I can SSH into 192.168.1.4 with no problem, even without touching hosts.allow and hosts.deny. I've also noticed that in the properties windows (see screenshot below) of the "VirtualBox Host-Only Network", the second checkbox, "VirtualBox Bridged Networking Driver" is unchecked. While the same checkbox of the physical NIC (that is bridged to) is checked. So my further question is: is this how VBox bridged networking supposed to be setup? Any rationale behind this? I'd appreciate if someone could provide some explaination on VBox bridged networking setup on Windows host and I'll accept it as an answer.

    Read the article

  • setting up freedns with an existing domain

    - by romeovs
    I've been running a webserver off of a pc at a static IP succesfully for the past 5 months. recently however, I've moved into another appartment and my ISP only provides a dynamic IP (my IP changes from time to time). I'm not an internet genius but I was thinking to fix this by using a Dynamic DNS provider. So I got on the web and found freedns. I'm a bit confused about how to set up everything though. I've managed to succesfully install the IP updater daemon on my web server. Then, in my registrars control panel, I set the NS records to point at ns1 through ns4.afraid.org (removing the old NS records). I'm not certain what I should do with the A records though (for now they are still pointing to the old static IP address). I have A records for www, blog, irc, etc. but I cannot point them at my new IP address, because it isn't Could someone explain this in the clearest possible sense (perhaps elaborating on what happens at each step of the DNS process). I never really knew what the A records are for anyway. (note that I haven't really found any documentation at the freedns website, or on google)

    Read the article

  • Enterprise Portal Issue with the Ax Demo VPCs

    - by ssmantha
    Microsoft’s Ax Demo VPC is basically configured for a static IP address 192.168.0.1, this is due to the fact that the VPC has Domain Controlller configured in it which requires a static IP. When we put this VPC on a network with a different subnet and change the IP you can observer that the site http://sharepoint and http://sharepoint/EP cease to function and show “Page Not Found” errors in the browser. This is mainly due to the DNS configuration which is not updated. Below is the screen shot of the changes that needs to be done to make the site functioning properly. Change the following entries in the Forward Lookup Zones of DNS management: These websites default, SharePoint and projectserver are all mapped to a single port in the IIS i.e. port number 80. These websites are recognised with host headers. These host headers are configured in DNS with incorrect IP address entries in DNS when you change the IP address of the VPC. Just change these values to point to the Local Loop Adapter (127.0.0.1) and change the DNS to point to this address in the TCP/IP properties as shown below: This will resolve the issue with the website rendering. Initially you may get time out errors while browsing these website. be patient and try again this would work.

    Read the article

  • ubuntu 10.04; kvm bridged networking not working with public ip addresses

    - by senorsmile
    I have a dedicated hosted server box with ubuntu 10.04 64 bit installed. I would like to run kvm with ubuntu 8.04 installed for some php 5.2 compatible apps(they don't work right with php 5.3, the default in ubuntu 10.04). I installed KVM as instructed at https://help.ubuntu.com/community/KVM/Installation . I installed the vm using virt-manager. I never could figure out how use virt-install or any of those automated installers. I just installed it using the disc. I set up bridged networking as per https://help.ubuntu.com/community/KVM/Networking . However, the bridged connection doesn't work. Here's my /etc/network/interfaces on the host, running ubuntu 10.04. (with specific public ip blanked) auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address xx.xx.xx.xx netmask 255.255.255.248 gateway xx.xx.xx.xa bridge_ports eth0 bridge_stp on bridge_fd 0 bridge_maxwait 10 ` Here's my /etc/network/interfaces on the guest, running ubuntu 8.04. auto lo iface lo inet loopback auto eth0 iface eth0 inet static address xx.xx.xx.xy netmask 255.255.255.248 gateway xx.xx.xx.xa The two vm's can communicate to each other. But, the guest vm can't access anyone in the real world. Here's my /etc/libvirt/qemu/store_804.xml <domain type='kvm'> <name>store_804</name> <uuid>27acfb75-4f90-a34c-9a0b-70a6927ae84c</uuid> <memory>2097152</memory> <currentMemory>2097152</currentMemory> <vcpu>2</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/store_804.img'/> <target dev='hda' bus='ide'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> </disk> <interface type='bridge'> <mac address='52:54:00:26:0b:c6'/> <source bridge='br0'/> <model type='virtio'/> </interface> <console type='pty'> <target port='0'/> </console> <console type='pty'> <target port='0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes'/> <sound model='es1370'/> <video> <model type='cirrus' vram='9216' heads='1'/> </video> </devices> </domain> Any idea where I've gone wrong?

    Read the article

  • Wildcard subdomain setup ... want to change host IP throws off client A records... what to do...

    - by Joe
    Here is the current set up (in a nutshell). The site is set up with a wildcard subdomain, so *.website.com is accessible. Clients can then domain map their own domains with an A record to the server IP address and it will translate the to appropriate *.website.com with re directions and env variables in htaccess. Everything is working perfect... but now comes the problem. The site has grown larger than a single DQC Xeon server can handle at peak times. Looking at cloud options seems tempting, but clients are pointing their domains to a single IP address with the A record (our server). Now, this was probably bad planing from the start, but the question is, if this was to be done today, how would we set it up so that clients use a CNAME perhaps to point their domains to our server rather than an A record. And, if that is not possible for the root domain, how can we then use multiple IP addresses on our side to translate the incoming http request? Complex enough? Hope I've explained it well!

    Read the article

  • Stream Music and Video Over the Internet with Windows Media Player 12

    - by DigitalGeekery
    A new feature in Windows Media Player 12, which is included with Windows 7, is being able to stream media over the web to other Windows 7 computers.  Today we will take a look at how to set it up and what you need to begin. Note: You will need to perform this process on each computer that you want to use. What You’ll Need Two computers running Windows 7 Home Premium, Professional, or Ultimate. The host, or home computer that you will be streaming the media from, cannot be on a public network or part of domain. Windows Live ID UPnP or Port Forwarding enabled on your home router Media files added to your Windows Media Player library Windows Live ID Sign up online for a Windows Live ID if you do not already have one. See the link below for a link to Windows Live.   Configuring the Windows 7 Computers Open Windows Media Player and go to the library section. Click on Stream and then “Allow Internet access to home media.”   The Internet Home Media Access pop up window will prompt you to link your Windows Live ID to a user account. Click “Link an online ID.” If you haven’t already installed the Windows Live ID Sign-In Assistant, you will be taken to Microsoft’s website and prompted to download it. Once you have completed the Windows Live download assistant install, you will see Windows Live ID online provider appear in the “Link Online IDs” window. Click on “Link Online ID.” Next, you’ll be prompted for a Windows Live ID and password. Enter your Windows Live ID and password and click “Sign In.” A pop up window will notify you that you have successfully allowed Internet access to home media. Now, you will have to repeat the exact same configuration on the 2nd Windows 7 computer. Once you have completed the same configuration on your 2nd computer, you might also need to configure your home router for port forwarding. If your router supports UPnP, you may not need to manually forward any ports on your router. So, this would be a good time to test your connection. Go to a nearby hotspot, or perhaps a neighbor’s house, and test to see if you can stream your media. If not, you’ll need to manually forward the ports. You can always choose to forward the ports anyway, just in case. Note: We tested on a Linksys WRT54GL router, which supports UPnP, and found we still needed to manually forward the ports. Finding the ports to forward on the router Open Windows Media Player and make sure you are in Library view. Click on “Stream” on the top menu, and select “Allow Internet access to home media.”   On the “Internet Home Media Access” window, click on “Diagnose connections.” The “Internet Streaming Diagnostic Tool” will pop up. Click on “Port forwarding information” near the bottom.   On the “Port Forwarding Information” window you will find both the Internal and External Port numbers you will need to forward on your router. The Internal port number should always be 10245. The external number will be different depending on your computer. Microsoft also recommends forwarding port 443. Configuring the Router Next, you’ll need to configure Port Forwarding on your home router. We will show you the steps for a Linksys WRT54GL router, however, the steps for port forwarding will vary from router to router. On the Linksys configuration page, click on the Administration Tab along the top, click the “Applications & Gaming Tab, and then the “Port Range Forward” tab below it. Under “Application,” type in a name. It can be any name you choose. In both the “Start” and “End” boxes, type the port number. Enter the IP address of your home computer in the IP address column. Click the check box under “Enable.” Do this for both the internal and external port numbers and port 443. When finished, click the “Save Settings” button. Note: It’s highly recommended that you configure your home computer with a static IP address When you’re ready to play your media over the Internet, open up Windows Media Player and look for your host computer and username listed under “Other Libraries.” Click on it expand the list to see your media libraries. Choose a library and a file to play. Now you can enjoy your streaming media over the Internet. Conclusion We found media streaming over the Internet to work fairly well. However, we did see a loss of quality with streaming video. Also, Recorded TV .wtv and dvr-ms files did not play at all. Check out our previous article to see how to stream media share and stream media between Windows 7 computers on your home network. Similar Articles Productive Geek Tips Enable Media Streaming in Windows Home Server to Windows Media PlayerFixing When Windows Media Player Library Won’t Let You Add FilesShare Digital Media With Other Computers on a Home Network with Windows 7Share and Stream Digital Media Between Windows 7 Machines On Your Home NetworkLearning Windows 7: Manage Your Music with Windows Media Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Stormpulse provides slick, real time weather data Geek Parents – Did you try Parental Controls in Windows 7? Change DNS servers on the fly with DNS Jumper Live PDF Searches PDF Files and Ebooks Converting Mp4 to Mp3 Easily Use Quick Translator to Translate Text in 50 Languages (Firefox)

    Read the article

  • passing multiple vectors to function by reference (using structure)

    - by madman
    Hi StackOverflow, Can someone tell me the correct way of passing multiple vectors to a function that can take only a single argument? (specifically for pthread_create (..) function) I tried the following but it does not seem to work :-( First, I created the following structure struct ip2 { void* obj; int dim; int n_s; vector<vector<vector<double> > > *wlist; vector<int> *nrsv; struct model *pModel; }; The threads that I have created actually needs all these parameters. Since im using pthreads_create I put all this in a structure and then passed the pointer to the structure as an argument to pthread_create (as shown). some_fxn() { //some code struct ip2 ip; ip.obj=(void*) this; ip.n_s=n_s; ip.wlist=&wlist; ip.nrsv=&nrsv; ip.pModel=pModel; ip.dim=dim; pthread_create(&callThd1[lcntr], &attr1, &Cls::Entry, (void*) &ip); } The Entry method looks something like this. void* Cls::Entry(void *ip) { struct ip2 *x; x = (struct ip2 *)ip; (reinterpret_cast<Cls1 *>(x->obj))->Run(x->dim,x->n_s, x->wlist, x->nrsv, x->pModel); } The Run method looks something like this. void Run(int dim, int n_c, vector<vector<vector<double> > > *wlist, vector<int> *nrsv, struct model* pModel ) { //some code for(int k = 0; k < n_c; ++k) { //some code end = index + nrsv[k]; //some code } I get the following error when I try to compile the program. error: no match for ‘operator+’ in ‘index + *(((std::vector<int, std::allocator<int> >*)(((unsigned int)k) * 12u)) + nrsv)’ Can someone tell me how to do it the right way. Madhavan

    Read the article

< Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >