Search Results

Search found 4866 results on 195 pages for 'ngu soon hui'.

Page 125/195 | < Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >

• Nexus One WiFi connection problems.

  - by sunocky

  I have two new Nexus One for a research project. For the projects I need to keep a server running on the phone. But soon I found out that both the phones have inconsistent WiFi connection problems at my home. It can connect to my WiFi network, but will drop off in a random time. And in order to reconnect to my WiFi, I may need to reboot my router, or the phone will say "obtaining IP address" and then "Unsuccessful". I also own a G1 with firmware version 1.6, it has no such connection problems. Well, to my surprise, the two Nexus One works fine with connecting to the WiFi network at my work place, which is a WEP type WiFi connection. By the way, it is a WPA type connection at my home. Anyone knows what's the problems with the Nexus One? Any suggestions on what should I do if I want to keep the WiFi connection live all the time at my home? Thanks very much!

  Read the article

• Weird PCI bug: lots of missed packets, or data comes in "bursts"

  - by Thomas O

  I have an ABIT KN9 motherboard. It has one PCI-e x16 slot, three PCI-e x4 slots and two legacy PCI. My problem is with the legacy PCI (which I shall just call "PCI".) I currently have an Nvidia GeForce 8600 GT (a low end card) installed in the x16 slot and a TV card in PCI #1; the x4 slots are unused, as is PCI #2. I plan to upgrade the graphics card soon, the current card was spare. I sometimes install a USB expander in PCI #2 but it causes a lot of problems - see below. The problem is under Linux (Ubuntu 10.10, Linux 2.6.35-22-generic), but probably under all operating systems (I have not yet been able to test Windows, but I suspect it will do the same as the problems occur on the BIOS/POST side too, e.g. when using a USB keyboard on the expander the keyboard will not work at all) PCI has an enourmous delay, and packets arrive in large chunks. For example, when using the USB expander, my USB mouse lags and jumps in large steps every second or so, while using the motherboard USB does not present this problem. My TV card will only do one or two frames per second, and the program (xawtv) usually times out and crashes. In dmesg, I'm getting messages like: bttv0: timeout: drop=74, irq=154/100476, risc=31f6256c, bits: VSYNC HSYNC OFLOW RISCI for my TV card, and similar timeout issues for my USB expander with a mouse. I received the motherboard, processor and RAM second hand and have only just got around to building it, so I don't know if this problem has always existed, or if it's a result of my set up. If anyone has any hints or solutions it would be appreciated - this is kind of a show-stopper for me.

  Read the article

• Can I trick Carbonite into backing up an external hard drive?

  - by Brian

  I use Carbonite to back up my PC (Windows XP). We were running low on disk space on our home PC (down to 15 GB), so I went out and purchased an external hard drive. However, Carbonite will not back it up. Is it possible to set up Carbonite to backup an external hard drive? I just want the external drive to be extra disk space. From their FAQ: The current version of Carbonite backs up only the files that reside on permanent hard drives on your computer. It will not back up network drives, external drives, and NAS (network accessed storage) drives. If there are files on a remote drive that you wish to include in your Carbonite backup, you should copy the files to a folder on your local hard drive. If the files are on a shared network drive, you could install Carbonite on the computer on which the network shared drive physically exists, and back the files up directly from that computer. Check back soon for a Carbonite service plan that will allow you to back up your external drives.

  Read the article

• Windows 7 task bar stuck in hiding, how to fix?

  - by Rainer Blome

  In Windows 7, I use the "Auto-hide the task bar" feature. Usually, it works fine: As soon as the pointer touches the screen bottom, the task bar pops up. However sometimes, it refuses to rise. Pressing the "Windows" key (or Ctrl-ESC) makes the start menu appear, forcing the task bar from hinding as well. Once I've done this, the task-bar auto-rises again. This is annoying, it interrupts flow. Has anyone else noticed this? How do I avoid this? Searching for "Windows 7 task bar auto-raise" shows that at least one other person experienced this problem: http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/how-can-i-fix-the-taskbars-auto-hide/8cdf6369-7354-4d29-9249-b7096ed0e28b?msgId=6dac3361-9d0f-4a9e-8642-b91a72826ba4 To answer the question posed by the "helpful" support engineer on the above page, of course I am running some apps when this happens, usually Explorer, Firefox, Eclipse, Cygwin/X, Xterm, Emacs, Notes, VPN client, Firewall. If my memory serves correctly, I have seen this behavior on earlier versions of Windows as well, XP at least. To reproduce this behavior, I tried switching between apps, and bringing apps to open other windows. I am unable to reproduce this behavior so far. So far, it appears to happen out of the blue, sometimes multiple times a day. Looks like a bug to me. The task bar should raise no matter what.

  Read the article

• Nginx, HAproxy, Unicorn, Rails and Node settings

  - by Julien Genestoux

  Our application is currently only a "regular" web app, with no fancy things like streaming HTTP or websockets. It's mostly a Rails app, served by a few (20 on 2 machines) Unicorn workers, proxied by a venerable nginx server which deals with load balancing. This has been working quite well for the past year and the app now serves between 400 and 800 requests per second at any point during the day. We're soon releasing 2 new APIs, which are both served by a Node application : a websocket one, as well as a long polling HTTP one. (the fancy thing like the Twitter streaming API where HTTP connections never end). They both use the same port on node and since the node app is stateless, we can certainly deploy a few of them to handle the traffic. The app (node) is now deployed in 5 instances and are now listening on 5 different 'private' ports on the same host. We need to put something in front of them to load balance, but also something that is able to deal with sockets (either websocket or HTTP streaming) which are intended to stay 'up' for days. The question is then : what? I read somewhere that HAProxy does a better job than Nginx at this. What do you recommend?

  Read the article

• Restoring Windows 2008 Server X86 and X64

  - by rihatum

  Restoring Windows 2008 Server (Domain Controller) We are using Backup Exec System Recovery 2010 to Image our DC. Now this software has a feature to convert the backup into a vmware or hyper-v VM I have also used disk2vhd to convert one of our dc's to a vhd and when I connected it into Hyper-V, it booted fine, I can login - BUT :-) As soon as I login, I get the activation error, that change product key, this product key isn't good for this machine etc. Question is : When in a real recovery situation, what would be the procedure to restore it either virtual or onto a physical box but be able to login and change product key etc ? In this scenario its just locked down and I cant' do anything, if this is the case, how would I replicate my production environment via these tools ? Any Ideas ? Will be grateful for some real world examples here. Same thing happens with our exchange backup / test restore either physical or virtual, can login but nothing else. Now we don't have the keys as they are OEM keys and just wondering what will happen in a real scenario, would we be purchasing another KEY or using the OEM key on our new server ? This is a test environment I am trying to create by restoring our backups either into hyper-v or physical test machines. Also, If I build up a machine (Server 2008) in a VM (Hyper-V), How can I restore just the system state backup of my DC into it ? will that give me the activation error too ? even though I would use the TRIAL ISOs provided by Microsoft ? Kind regards

  Read the article

• Anyone else experiencing high rates of linux server crashes today?

  - by Bron Gondwana

  Just today, Sat June 30th - starting soon after the start of the day GMT. We've had a handful of blades in different datacentres as managed by different teams all go dark - not responding to pings, screen blank. They're all running Debian Squeeze - with everything from stock kernel to custom 3.2.21 builds. Most are Dell M610 blades, but I've also just lost a Dell R510 and other departments have lost machines from other vendors too. There was also an older IBM x3550 which crashed and which I thought might be unrelated, but now I'm wondering. The one crash which I did get a screen dump from said: [3161000.864001] BUG: spinlock lockup on CPU#1, ntpd/3358 [3161000.864001] lock: ffff88083fc0d740, .magic: dead4ead, .owner: imapd/24737, .owner_cpu: 0 Unfortunately the blades all supposedly had kdump configured, but they died so hard that kdump didn't trigger - and they had console blanking turned on. I've disabled console blanking now, so fingers crossed I'll have more information after the next crash. Just want to know if it's a common thread or "just us". It's really odd that they're different units in different datacentres bought at different times and run by different admins (I run the FastMail.FM ones)... and now even different vendor hardware. Most of the machines which crashed had been up for weeks/months and were running 3.1 or 3.2 series kernels. The most recent crash was a machine which had only been up about 6 hours running 3.2.21.

  Read the article

• How to configure mod_proxy_balancer to gracefully fail under high load

  - by bramp

  We have a system which has one Apache instance in front of multiple tomcats. These tomcats then connect to various databases. We balance the load to the tomcat with mod_proxy_balancer. Currently we are receiving 100 requests a second, the load on the Apache server is quite low, but due to database heavy operations on the tomcats, the load there is roughly 25% (of what I estimate they can handle). In a few weeks there is an event happening and we estimate that our requests will jump significant, maybe by a factor of 10. I'm doing everything I can do reduce the load on our tomcats, but I know we are going to run out of capacity, so I would like to fail gracefully. By this I mean, instead of trying to deal with too many connections which all timeout, I would like Apache to somehow monitor average response time, and as soon as the response time to Tomcat is getting above some threshold, I would like a error page displayed. This means that users who are lucky still get a page rendered quickly, and those who are unlucky get a error page quickly. Instead of everyone waiting far too long for their page, and eventually everyone timing out, and the database being swamped with queries which are never used. Hopefully this makes sense, so I was looking for suggestions on how I could achieve this. thanks

  Read the article

• Is there a program to show programs loading during the boot process in real time?

  - by Gary M. Mugford

  Hi all, There are any number of programs that will show me WHAT will run during the boot process for Windows XP. I've always been partial to Mike Lin's version but there are several others, some of which are quite possibly superior. That's not the issue. What I'd really like is a program that would load first and then would list the programs that were about to load and then check them off as the programs loaded. This isn't something I necessarily need for myself. But certain family members get click happy as soon as they see the icon they eventually want to run and end up clicking on it. THIRTY TWO TIMES in one memorable crash-inducing spasm. If there was some way for 'progress' to be shown during the loading of from the various spots Windows auto-loads from, PLUS a BIG BANNER saying "Please do not move the mouse or click on anything until done.", I think I might cut down on my early morning family support calls significantly. I've tried a variety of searches, but I couldn't find the ones that show in real time in the forest of links to programs that will show the list after the fact. Any leads? If not, do any of you who write the after-the-fact listers want to take a shot at producing a utility to do what I think would be a relatively popular utility? Best of the season to all of you and yours. Thanks in advance for any replies, GM

  Read the article

• Sometimes, Synaptics Touchpad Tends Cursor to Top-Right Corner

  - by John Chadwick

  This has been a reoccurring issue for me, pretty much since I've owned this laptop (an ASUS G60JX.) Sometimes, the cursor will stop working properly and instead tend toward the top right of the screen. Basically, sometime into my usage (maybe after a couple hours) the touchpad will inevitably begin to malfunction, where it has confusing patterns of pushing the mouse cursor toward the top right of the screen. In addition, certain features (like momentum) seem to quit working entirely. It makes using the cursor extremely difficult. I've been having this issue across very many drivers. Pretty much as soon as multitouch came into the mix, although I don't believe multitouch has anything to do with it. It appears that, in the state of malfunction, it doesn't matter how you touch the touchpad, but where you touch it. Certain regions do not seem to trigger the cursor to move to the top right corner. In fact, no specific region seems to, but some areas do so more often than others. The issue can be resolved temporarily by putting the computer into sleep mode and awakening it. I have found no way to recreate this success without sleeping the computer or rebooting. Disabling and re-enabling the touchpad device does not do anything to resolve the problem. This issue does not affect my WACOM tablet nor any USB mice, and can be resolved (not to my satisfactory) by uninstalling the touchpad drivers. I'm looking for a solution, or at least a workaround that doesn't require sleep mode.

  Read the article

• Using WebDAV for automated downloads

  - by Geo Ego

  I currently manage a number of sites (at one point about a dozen, currently four, but soon growing into the dozens or hundreds) that serve a piece of software to clients at their remote locations. Our web server is Windows SBS Server 2k3, and the remote servers are Windows Server 2k3.When we have new versions of the software, I upload this new software to a specific directory and rename it; each time the clients boot, they pull their software from that specific directory. With just a few sites, it's no problem for me to RDP in and copy the files over. As the number grows, this will quickly become quite unwieldy. So I'm thinking that WebDAV would be part of a solution, so that I could simply push the newest version to our server (Windows SBS Server 2003) and make it available to the sites to grab. However, on the remote server side, what are some suggestions for automating the download? I only want the servers to download the files during downtime (between 3 AM and 9 AM), and I only want them to download if there is a new version available. I had thought of writing a program that checked the files on the WebDAV server at a regular interval, compared a hash of the current software to a hash of the software on the server, and only downloaded if they were different, but I'm wondering if there is something I am unaware of that can automate the process.

  Read the article

• How can I make Internet Explorer 6 render Web pages like Internet Explorer 11?

  - by gparyani

  Now, I know that this may seem like a bad question in that I can just upgrade to Internet Explorer 8, but I am sticking with IE6 in that IE8 removes valuable features, like the ability to save favorites offline and the fact that a file path turns into a Windows Explorer window and typing a Web address into Windows Explorer changes it into an IE window. I know that Internet Explorer 6 does a really bad job at rendering some pages. I know of the Google Chrome Frame extension that brings Chrome-style rendering into IE, but that will soon be discontinued. So, I tried another thing: I know that C:\Windows\System32\mshtml.dll contains the Trident rendering engine that is used by IE, so I tried something: I first backed up the original file by renaming it on Windows XP to mshtml-old.dll, then I tried to copy in the DLL from a computer running Windows 7 with Internet Explorer 10. I noticed that, after copying, the system had replaced the new DLL with the old one, but left the one I backed up intact. Is there any way I can get the system to not replace the DLL like that so that I can transfer in IE11's mshtml.dll into Windows XP and make IE6 render like IE11? I'm looking for an answer that describes how to tweak my system to make IE6 render like IE11 (or IE10), not one that tells me to upgrade IE or install another browser. I don't care how tedious the method is, just as long as it works.

  Read the article

• Batch file to create many files with special characters

  - by MollyO

  Essential info: I have a file "DB_OUTPUT.TXT" with 304 lines that I need to turn into 304 files (one per line). Each line contains many special characters and may be up to tens of thousands of characters long. For these reasons, I'm having difficulty using a cmd.exe batch file (which limits the amount of input) and the echo command (which would try to execute each special character, short of me having to escape them all). I also have a file "DB_OUTPUT_FILENAMES.TXT" containing a distinct filename for each line-soon-to-be-file from "db_output.txt". So line 1 of DB_OUTPUT.TXT needs to be the body of a new file with a name equal to line 1 of DB_OUTPUT_FILENAMES.TXT. Extra info: As you may have guessed, DB_OUTPUT.TXT is output from a database; it contains 304 records with 6 or 7 columns at a fixed width with the last column being a SQL query. Each of these lines (db records) will be used as a script to create new database objects, which is why the special characters need to be preserved. Question: Is there a way to do this in a batch-like fashion? I'd be happy with either a Windows solution or a Linux one.

  Read the article

• Anyone know a good mind mapper that works with a scheduler?

  - by GLycan

  TL;DR: Mind mapping tasks to be processed into a schedule based on task metadata. I have all sorts of ideas about what to invest resources (mainly time) in, but when I actually have time to do something I useually end up browsing reddit for not knowing what do to, and the frequancy with which I forget deadlines scares me. I'd love to bring order and structure into my mind, and always know what to do next. So, I want a mind mapping app, where I'd give each branch (types and subtypes of things I want to do) a importance score (if there were two branches, and one had 60 while the other 40, they would respectivily get 60% and 40% of the parent's importance, with the root being 100) and a how soon that branch should be revised/updated (an hobby I want to try out might be checked, say, once a week, while a school subject should be checked once a day) and give each leaf (something I want/need to do) how much time it takes, deadline (if any), and optionally an absolute importance, reoccurrence (guitar practice might repeat once a week), and prerequisites (reading something requires that book (although that could be brought somewhere), coding requires a box, jogging requires being outside) and maybe some other flags, like if it's enjoyable or not. It should either be packaged or working with a schedular app, to which I'd say, look, my day works this way (completely busy from 8 to 9:15, then 15 minutes of being inside with nothing, ..., two hours with box and possibility to go outside, etc), saying that such-and-such pattern is school and happens ever weekday except such-and-such days. The output should be of the form of a schedule, fit for printing or, when I finally get an android, mobile viewing, that schedules tasks with regards to availability of resources and importance (importance being derived from the leaf-task's parent branches), and the set of flags (all work and no play makes me a dull boy). One of these tasks should be reviewing anything that should be updated on that day, including future day layouts (e.g, if the time slots of future days have changed. This should be done every day.) Does anyone know some collection of preferably open-source (or free, or pirateable) tools, or better yet a single one, that accomplishes this task? I know python pretty well, and should be able to write any necessary glue.

  Read the article

• lighttpd with multiple IPs, each with a UCC certificate and many hostnames

  - by Dave

  I'd like to get lighttpd working with UCC certificates, but I can't seem to figure out the correct syntax. Essentially, for each IP address, I have one UCC certificate and a bunch of hostnames. $SERVER["socket"] == "10.0.0.1:443" { ssl.engine = "enable" ssl.ca-file = "/etc/ssl/certs/the.ca.cert.pem" ssl.pemfile = "/etc/ssl/private/websitegroup1.com.pem" $HTTP["host"] =~ "mywebsite.com" { server.document-root = /var/www/mywebsite.com/htdocs" } The above code works fine for one hostname, but as soon as I try to set up another hostname (note the same SSL cert): $SERVER["socket"] == "10.0.0.1:443" { ssl.engine = "enable" ssl.ca-file = "/etc/ssl/certs/the.ca.cert.pem" ssl.pemfile = "/etc/ssl/private/websitegroup1.com.pem" $HTTP["host"] =~ "anotherwebsite.com" { server.document-root = /var/www/anotherwebsite.com/htdocs" } ...I get this error: Duplicate config variable in conditional 6 global/SERVERsocket==10.0.0.1:443: ssl.engine Is there any way I can put a conditional so that only if ssl.engine is not already enabled, enable it? Or do I have to put all my $HTTP["host"]s inside the same $SERVER["socket"] (which will make config file management more difficult for me) or is there some entirely different way to do it? This has to be repeated for multiple IPs too (so I'll have a bunch of SERVER["socket"] == 10.0.0.2:443" etc), each with one UCC cert and many hostnames. Am I going about this the wrong way entirely? My goal is to conserve IP addresses when I have many websites that are related and can share an SSL certificate, but still need their own SSL-accessible version from the appropriate hostname (instead of a single secure.mywebsite.com).

  Read the article

• Is my laptop battery dead?

  - by Josh

  Recently my laptop battery will get extremely hot (definitely hotter than it should get) when I charge it. After that I usually end up removing it once it's fully charged to let it cool down, which takes a couple hours... Question is, is my battery dead? My last battery I had that died just ended up lasting 2 - 3 minutes on battery, no weird heat issues. And is there any way to possibly fix this? Probably not but I won't be able to get a replacement anytime soon. UPDATE: A few days ago when this happened and it cooled down, assuming it was fully charged, I ran my laptop on battery, and the battery life lasted about 10 minutes and then the laptop shutdown. I then plugged it in later and charged it back up, and for a while I had a orange light blinking on my laptop - which I assumed meant the battery was dead, especially since I got 10 minutes battery life. Then today, I turned my laptop on and was surprised to see that the battery was at 20% and charging (it's been plugged in since the incident above, so it should have been fully charged when I shut it off) I let it charge up, and as usual it got pretty hot around the time it was fully charged. So I turned my laptop off and pulled the battery out to let it cool down Now the thing is, just now I tried running it on battery, and it's been going for an hour now... so maybe its not dead? (also the orange light is no longer blinking...) Thanks in advance if anyone knows whats going on, and how to fix it, if its fixable =] EDIT: Some info if it helps... my laptop is about 2 years ago, and it's an Asus K50ID. I know laptop batteries usually don't last more than a year but I'm trying to keep this one going for as long as I can.

  Read the article

• MicroSD card getting corrupted for no good reason

  - by ChaosR

  I recently bought an MicroSD card online. It's a Sandisk 16GB class 2. However, it has a nasty problem. Every time I fill it with my data, the fat tables get corrupted. I've tried reformatting it, blanking it, doesn't seem to solve the problem. I have tried windows and linux (ubuntu), both have the problem. I've used my usb microsd readers, and even tried putting it in my phone and putting data on it from there. All have this problem. Now the really odd thing is, besides the corrupted file tables, no programs can find anything wrong with the hardware. I've tried both chkdisk and "badblocks -w", neither give any type of error. Now I don't know if the actual data gets corrupted, or if its just filesystem tables. What happens is that one or more folders start showing a load of chinese-charred (random UTF8 symbols I suppose) folders and files, and it is impossible to do anything with those. All the other data (outside of the corrupted folders) seems fine. I've tried to test it, and the problem doesn't seem to show up until I fill the disk upto about 3~4GB. After that I can still access the data. But as soon as I eject/safely remove/unmount it, the bad things happen somehow. Next time I plug it in, the folders I most recently wrote to (but sometimes also the folders I wrote the time before last time to) are all gibberish. Does anybody have any clue what might be going on here? EDIT: It seems I can't even put ext3 or ext4 on it, they both complain about a corrupted journal. Gheh, guess something is really broken here.

  Read the article

• PHP script not automatically updating when moved to another server

  - by user32007

  A friend built a ranking system on his site and I am trying to host in on mine via WordPress and Go Daddy. It updates for him but when I load it to my site, it works for 6 hours, but as soon as the reload is supposed to occur, it errors and I get a 500 timeout error. His page is at: jeremynoeljohnson .com/yakezieclub My page is currently at http://sweatingthebigstuff.com/yakezieclub but when you ?reload=1 it will give the error. Any idea why this might be happening? Any settings that I might need to change? Here is the top of the index.php file. I'm not sure which part of any of it is messing up. I literally uploaded the same code as him. Here's the reload part: $cachefile = "rankings.html"; $daycachefile = "rankings_history.xml"; $cachetime = (60 * 60) * 6; // every 6 hours, the cache refreshes $daycachetime = (60 * 60) * 24; // every 24 hours, the history will be written to // - or whenever the page is requested after 24 hours has passed $writenewdata = false; if (!empty($_GET['reload'])) { if ($_GET['reload']== 1) { $cachetime = 1; } } if (!empty($_GET['reloadhistory'])) { if ($_GET['reloadhistory'] == 1) { $daycachetime = 1; $cachetime = 1; } } if (file_exists($daycachefile) && (time() - $daycachetime < filemtime($daycachefile))) { // Do nothing } else { $writenewdata = true; $cachetime = 1; } // Serve from the cache if it is younger than $cachetime if (file_exists($cachefile) && (time() - $cachetime < filemtime($cachefile))) { include($cachefile); echo "<!-- Cached ".date('jS F Y H:i', filemtime($cachefile))." -->"; exit; } ob_start(); // start the output buffer ?>

  Read the article

• How to set up RAID-0 first time on new PC?

  - by jasondavis

  I have built basic PC's in the past but have never used a RAID array at all. SO now I am buying parts to build my new PC, it will be an intel i7 processor. My motherboard will have RAID support which I will use instead of an aftermarket raid controller for now. Also I plan to use 2 SSD drives in RAID-0 for my windows 7 OS. (Please note that I am aware of the issues with doing this, including lack of TRIM support when using RAID with SSD drives. I am OK with it not working as I can just re[place the drives in a year or so or wheneer they become more sluggish). SO here is my question part. If I assemble the motherboard, PSU, processor, RAM, vidm card, etc and then go to turn the PC on, it will have the 2 SSD drives hooked up. so I assume I will then soon the BIOS screen before I install windows? How to I go about making the 2 drives work in RAID-0 at this point? I do the raid part before installing my OS right? Please help with the steps involved from assembling the parts of the PC and then turning it on, to the part of getting the RAID-0 set up between the 2 drives and then installing my windows 7 OS from a Optical drive? Please help, all advice, instructions, tips appreciated as long as on topic. I do not need to be told that this is a bad idea as far as if 1 drive fails I losse it all, I plan on having a disk IMAGE to be able to restore my OS and software to a new set of drives at anytime needed in the event of drive failure. Same goes for lack of TRIM support. Thanks for reading and help =)

  Read the article

• How to grant read/write to specific user in any existent or future subdirectory of a given directory? [migrated]

  - by Samuel Rossille

  I'm a complete newbie in system administration and I'm doing this as a hobby. I host my own git repository on a VPS. Let's say my user is john. I'm using the ssh protocol to access my git repository, so my url is something like ssh://[email protected]/path/to/git/myrepo/. Root is the owner of everything that's under /path/to/git I'm attempting to give read/write access to john to everything which is under /path/to/git/myrepo I've tried both chmod and setfacl to control access, but both fail the same way: they apply rights recursively (with the right options) to all the current existing subdirectories of /path/to/git/myrepo, but as soon as a new directory is created, my user can not write in the new directory. I know that there are hooks in git that would allow me to reapply the rights after each commit, but I'm starting to think that i'm going the wrong way because this seems too complicated for a very basic purpose. Q: How should I setup my right to give rw access to john to anything under /path/to/git/myrepo and make it resilient to tree structure change ? Q2: If I should take a step back change the general approach, please tell me.

  Read the article

• Cutting Ubuntu to the bone for Virtualbox VM

  - by user32853

  I've been looking around for a Linux variant which will install only the software I need rather than everything Ubuntu (for example) puts in by default. This is to create a virtual machine in Virtualbox which has bash, apache, python, perl, SQLite, openssh and a few other programs but nothing else. I'd prefer to go with Ubuntu if possible but another modern distro would do as well (I like using apt-get and yum rather than downloading/compiling etc). So far, I've tried: SuseStudio.com, which is probably the best so far. Pressing F4 to get the boot options on Ubuntu 9.10, but there is no minimal installation (I think there was once). Arch Linux, slightly confusing install procedure but I might go back and try again. Gentoo, started well but fairly soon the HD on the virtual machine went to 2Gb, even before the installation had started in earnest (I'd partitioned the disks is all). I realise there are various "small" Linuxes around like Puppy, Feather, DSL, etc, but they seem to be aimed at desktop users or as a techie's toolkit, and I want a small-as-possible server distro which can be managed with tools like apt or yum or similar. TIA for any advice you can offer! -- Monty

  Read the article

• Proxychains, Tortunnel, Privoxy: cannot connect() to port

  - by Benjamin

  Hi all, I'm trying to do an nmap scan through tor using tortunnel, privoxy and proxychains like explained in the following video: http://vimeo.com/6238958 I'm getting rather weird results. I can successfully perform any SYN scan on any port. However as soon as I try to do connect() scans, proxychains cannot connect itself to all ports. In other words, I can perform connect() scans to port 80: proxychains nmap -P0 -A -sV www.zzz.com -p80 but not port 21: proxychains nmap -P0 -A -sV www.zzz.net -p21 I get the following error: Starting Nmap 4.62 ( http://nmap.org ) at 2010-06-02 08:34 UTC ProxyChains-2.1 (http://proxychains.sf.net) random chain (1):....127.0.0.1:5060....can't connect to..113.I2.1W1.YY:21 random chain (1):....127.0.0.1:5060....can't connect to..113.I2.1W1.YY:21 random chain (1):....127.0.0.1:5060....can't connect to..113.I2.1W1.YY:21 random chain (1):....127.0.0.1:5060....can't connect to..113.I2.1W1.YY:21 random chain (1):....127.0.0.1:5060....can't connect to..113.I2.1W1.YY:21 random chain (1):....127.0.0.1:5060....can't connect to..113.I2.1W1.YY:21 My only guess would be that the exit node I'm using does not allow connections to port 21. Would that be correct? How could I fix it? Thanks for your time.

  Read the article

• Radeon 6950 - Garbling of text and graphics in certain Windows only

  - by Greg

  This morning I noticed the text in Gmail (in Firefox 4) looked a little funny (kind of thin, maybe some color fringing). I went to work and thought it might be some ClearType issue or something with the way Direct way that FF4 draws to the screen. When I came back from work (I left the computer on), the problem was much worse - way beyond ClearType nit-picking. The text was barely readable. I opened Chrome and there was no such problem. It seems like only Windows that use hardware acceleration are garbled, and ones that use GDI are not. But, I fired up Dragon Age and didn't notice any problems (I only really looked at the main menu though). Here is a link to a screen shot that illustrates the problem. Notice how the Windows Live Mesh window is completely unreadable, the text in Firefox 4 (left) is pretty bad, while Chrome, the Windows Control Panel, and the task bar are perfectly fine. The fact that the problem shows up in screen shots and that it only happens in certain Windows makes me confident that the problem cannot be with the monitor or DVI cable. I am using the AMD Radeon drivers from 4/27/11. The card I have (MSI Frozr II) came with a slight overclock (810Mhz) out of the box, but it looks like when I'm on the Windows desktop it's not running at full clock (CCC reports 450Mhz). Still, I underclocked it to the stock reference clock (800Mhz) and it made no difference. The idle temperature according to Afterburner is 42-44 Celsius, which seems a tad high but not enough to cause a problem - it's cold to the touch if I open up the machine. What the heck could be causing this? The problem varies in intensity. As we speak I'm in Firefox and things look better than they did earlier - it'll probably get worse again soon. Radeon 6950 (MSI Frozr II), Seasonic X 560, Core i5 2500K at stock clockspeeds, 16GB RAM, Asus P8P67 M Pro

  Read the article

• PHP cannot connect to MySQL

  - by yogal

  Hello, I recently installed Apache 2 + PHP 5.3.1 + MySQL 5.1.44 on my Windows 7 64bit machine following this guide: http://sleeplessgeek.blogspot.com/2010/01/setting-up-apache-php-mysql-phpmyadmin.html It all went fine, php is working great (even with XDebug) but I cannot connect to mysql server. A simple script I wrote to test connection (yes, root has no pass): $username = "root"; $password = ""; $database = "test"; $hostname = "localhost"; $conn = mysql_connect($hostname, $username, $password) or die("Unable to connect to MySQL Database!!"); It prints this error after 60sec of timeout: Warning: mysql_connect() [function.mysql-connect]: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. I can connect to mysql using cmdmysql -h localhost -u root Services are working properly. There also seems to be a problem with PhpMyAdmin (using 3.2.5). As soon as I type user and pass the page loads and turns blank (content-lenght in headers is 0 but status code is 302 Found). Looks like something wrong with cookies (my auth method). I hope someone has a clue, it has to be something dumb simple I missed. Thanks in advance.

  Read the article

• Send keystrokes simultaneously to both host and slave over internet?

  - by donodarazao

  I would like to watch movies with a friend who lives far away from me. For this, the playback should be synchronized on both our pc. However, we have some constraints: Due to our low bandwidth internet, any form of streaming solution wouldn't work. We do however both have the same copy of the movie on our harddisks. We use movies to learn languages and because of this, we very frequently pause and rewind. The typical "3...2...1...go!" solution over skype wouldn't work because it would soon get out of sync. I imagine an approach that sends keystrokes simultaneously to both our pc would work (for example, if I press space to pause the movie at my pc, space should also be send to his pc). Any ideas how this could be realized? I looked into Synergy and InputDirector, but both neither seem to be an option, because I don't want to see the desktop of my friend, I want to see my desktop Keystrokes should be sent simultaneously to both pc, not just to one pc We have both Windows 7x64, and we might use any media player (VLC, XBMC,...).

  Read the article

< Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >