Search Results

Search found 5810 results on 233 pages for 'offsite backup'.

Page 125/233 | < Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >

• System x3550 M2 stuck on system initializing after firmware upgrades

  - by itmanager223

  Hey guys so i have been having this major issue for the last few hours now. I have a system x 3550M2 server and i ran the UEFI and IMM firmware upgrades within windows server 2008 R2 x64. All upgrades went fine and i was told to reboot. I performed the reboot cleanly using the OS restart option. Upon restarting it showed the system initializing screen and it stayed there for a good hour. After that hour i figured it froze and so i powered down and power up again. Now i can not boot back up to even see the IBM splash screen or the OS... I have tried switching the Jumpers to go to the backup UEFI and backup IMM and no luck. I have also reset the CMOS power and i have pressed the reset button 3 times on the light path and no luck. There are no lights light on the light path to indicate anything is broken. The only thing i see on the light path is the number 0.5. Any ideas guys i am quite stumped with this problem. Thanks a lot, Dani Cela

  Read the article

• Ubuntu+Win7--disk error press any key to restart

  - by Siddharth

  Apparently,none of the solutions in any other posts and forums worked for me For some reasons I decided to remove ubuntu from my hard disk drive. My partition table(presently): (/dev/sda1) (fat32) 900 MiB ---(MBR,I suppose) (/dev/sda2) (ntfs) 70 GiB -----(Windows 7) (/dev/sda3) (ntfs) 314.88 GiB --(Personal File storage) (/dev/sda4) (ext4) 80 GiB -----(Ubuntu 13.04) (unallocated) -----1.31 MiB So,after moving(cut-paste) everything(for backup) from the fat32 partition using win7..I booted into Ubuntu and copied the remaining 3 files(hidden in Win7 file explorer) --bootmgr,bootsect.bak,and one more which I do not remember.TERRIBLE MISTAKE After this I again booted into Windows and deleted ext4 partition..formatted it to ntfs..and shut down the pc.Then,I put in a Win7 bootable USB..using command prompt I entered bootrec /fixmbr,and bootrec /fixboot.. Restarting showed me the GRUB..choosing windows 7 showed me "Disk Error. Press any key to restart." I also installed a fresh Win7 installation on the 80 GiB partition expecting a Windows Legacy Bootloader with two win7 options..but did not work. Then..I used a Ubuntu LiveUSB to put it back to the present configuration(above) since all methods to restore the MBR failed.. I copied back the fat32 partitions backup files but couldn't copy those 3 files.Somehow ,they had been recreated and were non-replaceable. I do not want to format the win7 partition for a fresh one. I have used boot-repair..Restore MBR option brings back to "Disk error...." without even going through grub..so I reinstalled grub and I'm able to boot into Ubuntu. grub menu shows the win7 option as "Windows 7 (loader) (on /dev/sda1)". paste.ubuntu.com/5753710 paste.ubuntu.com/5775999

  Read the article

• Windows 7 - SBS - Why does copying a directory not include all subdirectories and files?

  - by indeed005

  Using Windows 7, fully updated... I have had some strange behaviour copying a whole user directory (e.g. "c:\users\bob" to "c:\backups\bob") I understand now that I should have used Easy Transfer or at least robocopy, but at the time all I wanted to do was backup the user's data before using the "Delete account" button. Unfortunately, I didn't check that my copy-paste had actually worked; all it had actually done was copied the appdata subdirectory of the user account. At the time of doing this backup I was logged in as the same user, bob (a local admin) in this example. When I discovered the missing files, I tried again using the domain admin account -- same story. Only appdata copied. No documents folders, nothing else. Then my boss tried, and it worked fine -- it copied all the files. Ctrl+C, Ctrl+V. I tried again... same profile... copied all the files. Same profile, same destination, same rights and permissions, same ownership, but different behaviour. Has anyone encountered this before and come up with a solution? BTW this was not using roaming profiles and the accounts are stored locally.

  Read the article

• disk write cache buffer and separate power supply

  - by HugoRune

  Windows has a setting to turn off the write-cache buffer (see image) Turn off Windows write-cache buffer flushing on the device To prevent data loss, do not select this check box unless the device has a separate power supply that allows the device to flush its buffer in case of power failure. Is it feasible and economical to get such a "separate power supply" for the internal sata drives of a non-server PC? Under what name is such a power supply sold? I know that there are UPS devices that can be connected to external drives,but what is required to be able to switch this setting safely on for an internal disk? The setting has different descriptions in different version of windows Windows XP: Enable write caching on the disk This setting enables write caching in Windows to improve disk performance, but a power outage or equipment failure might result in data loss or corruption. Windows Server 2003: Enable write caching on the disk Recommended only for disks with a backup power supply. This setting further improves disk performance, but it also increases the risk of data loss if the disk loses power. Windows Vista: Enable advanced performance Recommended only for disks with a backup power supply. This setting further improves disk performance, but it also increases the risk of data loss if the disk loses power. Windows 7 and 8: Turn off Windows write-cache buffer flushing on the device To prevent data loss, do not select this check box unless the device has a separate power supply that allows the device to flush its buffer in case of power failure. This article by Raymond Chen has some more detailed information about what the setting does.

  Read the article

• Using Truecrypt to secure mySQL database, any pitfalls?

  - by Saul

  The objective is to secure my database data from server theft, i.e. the server is at a business office location with normal premises lock and burglar alarm, but because the data is personal healthcare data I want to ensure that if the server was stolen the data would be unavailable as encrypted. I'm exploring installing mySQL on a mounted Truecrypt encrypted volume. It all works fine, and when I power off, or just cruelly pull the plug the encrypted drive disappears. This seems a load easier than encrypting data to the database, and I understand that if there is a security hole in the web app , or a user gets physical access to a plugged in server the data is compromised, but as a sanity check , is there any good reason not to do this? @James I'm thinking in a theft scenario, its not going to be powered down nicely and so is likely to crash any DB transactions running. But then if someone steals the server I'm going to need to rely on my off site backup anyway. @tomjedrz, its kind of all sensitive, individual personal and address details linked to medical referrals/records. Would be as bad in our field as losing credit card data, but means that almost everything in the database would need encryption... so figured better to run the whole DB in an encrypted partition. If encrypt data in the tables there's got to be a key somewhere on the server I'm presuming, which seems more of a risk if the box walks. At the moment the app is configured to drop a dump of data (weekly full and then deltas only hourly using rdiff) into a directory also on the Truecrypt disk. I have an off site box running WS_FTP Pro scheduled to connect by FTPs and synch down the backup, again into a Truecrypt mounted partition.

  Read the article

• Apps won't start after vanilla reboot

  - by Daniel R Hicks

  I had Adobe and Norton nagging me to reboot, so I did that -- clicked Reboot from the Start button. Everything seemed pretty normal as it shut down and came back up, but once up a bunch of apps won't start. The first one I noticed was Firefox. It would flash the disk light normally, but never appear on the screen. Then I tried to bring up an OpenOffice Calc window and same thing. I tried to bring up MS Word, and the splash screen appeared, but never the main screen, and the splash screen just sat there, with a swirly over it. But I tried Solitaire, Notepad++, Paint, and several others, and they popped up just fine. And I'm typing this from IE 8, which, if anything, came up faster than usual. When I try to open up "Network and Sharing Center" the window appears, but nothing appears in it, and eventually it's tagged "not responding". When I kill that window I get (after a delay) "Windows Explorer is not responding", and when I say "OK" the screen resets. I tried rebooting again, and no joy -- same as before. Have done nothing particularly strange on this box, and it's not generally at significant risk for malware. I haven't installed anything new other than the afore-mentioned updates. One other thing: Several minutes after rebooting I get the message "Error: Unable to start Bluetooth Stack Service." The Bluetooth radio is turned on, and I rarely have anything Bluetooth attached, and I don't recall that I've ever seen this message before. Added: Looking at Event Viewer, I'm getting a lot of "The description for Event ID 1 from source xxx cannot be found." Is there any significance to this? Added: I'm looking at restoring from backup, but the procedure is, at best, unclear. Is it sufficient to restore from "Backup and Restore Center", or must I restore from the restore DVD first?

  Read the article

• Can a non-redundant RAID5 cause any serious problems (compared to RAID0)?

  - by leemes

  I used to have a three-disc RAID5 (mdadm) in my computer for personal media storage (music, videos, photos, programs, games, ...). It had three discs with 750 GB each, resulting in an array capacity of 1.5 TB. One day (one year ago), I needed one of those discs to install another operating system. I thought, I don't need the redundancy anymore since I backup the most important stuff (personal photos e.g.) on an external disc anyway. So I decided to remove one of the three discs without converting the RAID to RAID0 or even two separate discs, because I had no temporary storage (since one cannot simply convert the RAID5 to RAID0 AFAIK). So now, for about one year, I have a non-redundant RAID5 with 2 of 3 discs running. Sometimes, one of the discs has a defective contact at the power cable or something similar causing the drive to stop working temporarily (I don't know exactly what it is). Since it still works when rebooting the computer and in most cases by calling some mdadm commands, it wasn't that problematic. Note that the data is not very critical, since I still have a backup of the most important stuff. But in the last few weeks, one of the drives fails very frequently (every few hours), so it gets really annoying to manage this. My questions are: Is there any disadvantage (apart from the annoying management) of a non-redundant RAID5 (with one drive less than typical) over a RAID0? If I understand it correctly, both have no redundancy and the same capacity. On a temporary drive failure, I can restart the array in both cases, assuming that the drive itself still works after the failure. Can it happen that the drive contents alter on a drive failure, making the array inconsistent? If so, can I tell mdadm to check the array for failures (without a file system level checking tool)? Since the drive most probably only has a defective contact causing it to fail for a second only, can I tell mdadm to automatically restart the array, so I will not even notice the failure if no application wanted to access the file system during the failure?

  Read the article

• saving data from a failing drive

  - by intuited

  An external 3½" HDD seems to be in danger of failing — it's making ticking sounds when idle. I've acquired a replacement drive, and want to know the best strategy to get the data off of the dubious drive with the best chance of saving as much as possible. There are some directories that are more important than others. However, I'm guessing that picking and choosing directories is going to reduce my chances of saving the whole thing. I would also have to mount it, dump a file listing, and then unmount it in order to be able to effectively prioritize directories. Adding in the fact that it's time-consuming to do this, I'm leaning away from this approach. I've considered just using dd, but I'm not sure how it would handle read errors or other problems that might prevent only certain parts of the data from being rescued, or which could be overcome with some retries, but not so many that they endanger other parts of the drive from being saved. I guess ideally it would do a single pass to get as much as possible and then go back to retry anything that was missed due to errors. Is it possible that copying more slowly — e.g. pausing every x MB/GB — would be better than just running the operation full tilt, for example to avoid any overheating issues? For the "where is your backup" crowd: this actually is my backup drive, but it also contains some non-critical and bulky stuff, like music, that aren't backups, i.e. aren't backed up. The drive has not exhibited any clear signs of failure other than this somewhat ominous sound. I did have to fsck a few errors recently — orphaned inodes, incorrect free blocks/inodes counts, inode bitmap differences, zero dtime on deleted inodes; about 20 errors in all. The filesystem of the partition is ext3.

  Read the article

• Restore a database with LDF file only

  - by Martin

  First of all, i know how stupid it is not to have a any backup. I can't help it, but i have to (try) to solve it. I have a transaction log (LDF) file from a SQL Server 2000 database that contains all transactions since the creation of the database. No truncation has been done. The MDF file is gone. Probably because of some disk failure. There is no backup. Not from the original database and not from the transaction log. I have tried to link the transaction log to a new clean database. But (ofcourse) that failed because SQL Server checks the identity of both files. I have read about software that can read the transaction log. ApexSQL seems to do that. I tried to install the trial version but it gives weird errors when trying to start the program. Anyone knows a solution for me? It may contain third party software, but i prefer a clean SQL Server solution.

  Read the article

• SBS 2008 Sharepoint Database good Memory Limit.

  - by ldelgado

  I manage a small network running on Small Business Server 2008. Lately, the Sharepoint embedded database is getting out of control with its memory usage. I've got a total of 16 GB of RAM on this server, and the Sharepoint database sometimes uses almost 8 GB of RAM. This never happened before, and it started happening after I installed Backup Exec 2010. It happens after a backup is performed. So I suspect there is a memory leak involved. I am working on that issue, but this question isn't about that. I would like to limit the amount of memory the Embedded database uses. I know how to do it. My question is, what would be the ideal amount of memory that I can allocate to Sharepoint? There are only 4 users on my network. One of the users uses two computers but not at the same time. They use sharepoint for a company calendar, and sometimes they share files that way also. Let me know if you need to know anything else. Thanks,

  Read the article

• Apache with multiple domains, single IP, VirtualHost is catching the wrong traffic

  - by apuschak

  I have a SOAP web service I am providing on a apache web server. There are 6 different clients (IPs) that request data and 3 of them are hitting the wrong domain. I am trying to find a way to log which domain name the requests are coming from. Details: ServerA is the primary ServerB is the backup domain1.com - the domain the web service is on domain2.com - a seperate domain that server seperate content on ServerB ServerA is standalone for now with its own IP and DNS from domain1.com. This works for everyone. ServerB is a backup for the web service, but it already hosts domain2.com. I added entries into the apache configuration file like: <VirtualHost *:443> ServerName domain2.com DocumentRoot /var/www/html/ CustomLog logs/access_log_domain2443 common ErrorLog logs/ssl_error_log_domain2443 LogLevel debug SSLEngine on ... etc SSL directives ... </VirtualHost> I have these for both 80 and 443 for domain1 and domain2 with domain1 being second. The problem is when we switch DNS for domain1 from ServerA to ServerB, 3 out of the 6 clients show up in the debug logs as hitting domain2.com instead of domain1.com and fail their web service request because domain2.com is first in the apache configuration file and catching all requests that don't match other virtualhosts, namely domain1.com. I don't know if they are hitting www.domain1.com, domain1.com (although I added entries for both) or using the external IP address or something else. Is there a way to see which URL they are hitting not just the page request or someother way to see why the first domain is catching traffic meant for the second listed domain? In the meantime, I've put domain1.com higher in the apache configuration than domain2.com. Now it catches the requests for all clients and works, however I don't know what it is catching and would like to make domain2.com the first entry again with a correct entry for domain1.com, for however they are hitting it. Thank you for your help! Andrew

  Read the article

• Efficient mirroring of directories using hardlinks

  - by zoqaeski

  I'm backing up my music collection on to a number of NTFS-formatted external hard-drives; however, as I store my main collection in FLAC and have my library on my laptop as MP3s to save space, I want to be able to back up both sets, because mass conversion between formats is time-consuming. The "music" directory can contain any format; the "mp3s" directory contains only MP3s converted from files in the "music" directory. The music collection on the laptop contains only MP3s, but they come from both sources. When I backup my laptop's library to the "mp3s" directory, I want to only copy across MP3 files that don't exist in the "music" directory; those that do should be hard-linked to the "music" directory. All directories have an identical hierarchy, sorted by artist, album, date, discnumber if applicable, etc, and I use a tagging editor to ensure consistency across all these locations. I'm also using a Linux computer, but keeping the music collections on NTFS-formatted partitions so that they are readable by both Linux and Windows. At the moment, I use the following command to perform the backups, but this is time-consuming due to the expensive nature of finding hard links. rsync -avu --progress --relative --ignore-existing --link-dest=../music/ **/*.mp3 /media/ntfspocket/mp3s Is there a way to perform this backup more efficiently, taking advantage of the directory hierarchy?

  Read the article

• I (stupidly) converted a TrueCrypt encrypted disk to GPT in Disk Management: now TrueCrypt won't mount it

  - by asilentfire

  Backstory: After moving a Macrium Reflect disk image from my TrueCrypt external drive (with whole disk encryption) onto a unencrypted drive and using Windows PE with Macrium Reflect to restore my internal disk to the recovery image on the external unencrypted drive, my Windows 8 failed to boot. I then went back and also recovered the System Partition (looking now, it is currently EFI), but I still couldn't boot into my backup.. I was in a hurry to get online for something so I just did a clean install of Windows 8, without the backup.. After I installed Windows 8, I went into Disk Management out of curiosity to see if there were other partitions with Windows 8 that Macruim might have missed, and there is (by default) a Recovery Partition of 100MB. My memory of this is hazy, as I was trying to get up and running for an exam at 4 AM: Something in Disk Management prompted me to convert my encrypted external drive to GPT.. I have no idea why I did this, but I went ahead and allowed it to convert my TrueCrypt drive to GPT. Now, I can't mount the drive in TrueCrypt.. Disk Management sees it as Disk 1, Basic, and Unallocated. I tried converting it back to MBR with Disk Management, but no dice with TrueCrypt :( If I try to mount the disk in TrueCrypt I get the message: Incorrect password or not a TrueCrypt volume I should never have messed with a Truecrypt drive in Disk Management, but I did. I have important college work in that drive, and fear I have lost it forever. PLEASE HELP

  Read the article

• Having an issue trying to get Gigabit speed across my network (Ubuntu Server)

  - by user94217

  I've just started looking into the network speeds at my office, the entire network is setup to be "Gigabit". This includes Gb switches, Gb Network cards and Cat 5e cabling. I'm not expecting the full speed, I just want more than ~90 Mb/s. I've been running some tests with iperf the linux tools and checking the hardware with ethtool. I have 3 servers and when doing my checks/test I discovered that the two backup servers can access each other at around 450 Mb/s but when using either one of them to connect and test the main server, I only get the 90Mb/s even though ethtool shows the networking card running at 1000/Full. The only difference between all the server/networking cards is the "Port" which ethtool shows. On the two backup servers the "Port" is shown as MII yet on the other it's shown as "Twisted Pair". When using ethtool -s to manually set the "Port" to MII on the main server, it looses all connectivity and does not show "Speed" or "Duplex". Anyway, Am i doing something wrong? Is there a specific reason my main server cannot use Gb when there appears to be no difference except the "Port"?

  Read the article

• Best format for hard drive for Windows and Mac?

  - by Neil

  I have a 500 GB USB External Hard Drive. I need four partitions on it, for the following purposes: 160 GB for a bootable backup of my Mac. 160 GB for a bootable backup of my Windows. 11 GB for a bootable Snow Leopard Install Disk Rest as for file storage. Now I need a partition table which will get recognised on both Windows and Mac, without needing extra software on Windows, which will let me keep bootable copies of both OS'es, but let me access the file storage from both OS'es. Currently, I have a GUI Partition Table, with Mac OS Extended (Journaled) Partitions for the two backups, Mac OS Extended for the Install Disk, and NTFS for the file storage. While this gets recognised perfectly on my Mac, thanks to an NTFS for Mac driver from Paragon, when connected to Windows, the drive is detected by the machine (listed in Safely Remove USB), but not recognised in Windows Explorer unless I install MacDrive, which is not feasible for me to install on public Windows Machines I might wanna access my storage area on. Can someone recommend the best combination of formats and software/drivers to get this done seamlessly?

  Read the article

• Where's my free space gone? (on my mac) [closed]

  - by Cawas

  Possible Duplicate: Something’s slowly eating my HD space Somehow part of my files from my USB disk, 40GB of it (exactly the space I was missing), were copied to /Volumes/ and when I mounted the disk it was called "600GB Disk 2", while "600GB Disk" was filled with duplicated data. All that happened at once, slowly, just this morning when I turned on my macbook. I could notice that thanks to Disk Inventory X. I could actually see those on GrandPerspective, but I thought it was just scanning my USB limited to that folder for whatever reason. On Disk Inventory I could see the /Volumes/ listing one folder as a folder and the second one as a link, like it should be. Well, looking at that folder, I quickly associated what was in it with my scheduled backup on Carbon Copy Cloner. I'm still not sure why the USB disk was mounted with wrong name, but what happened was CCC store the full path information of the source and destination, so when it tried to do the schedule backup it created the path that didn't exist, and copied everything there - while it should be copying into the mounted volume. While this is solved this time, what else could I have done to diagnose this kind of issue, for the next time?

  Read the article

• How to avoid duplicates when copying files that have been renamed at the destination

  - by Benoitt

  I have to get pictures from a folder – with subfolders which are updated automatically – with their extensions. These files have to be copied in a folder where a website based on PHP will edit them (by renaming and creating an XML file) to be downloadable and integrated in an XML feed. Because of the rename function of the script, when I perform the copy gain, all the files are duplicated, because the script has renamed the original ones already. I've tried a few things with rsync but I'm looking for something more powerful because I can't copy files with an external "history". #!/bin/bash find '/home/name/picture' -name '*.jpg' | while read FILE ; do rsync --backup --backup-dir=incremental --suffix=.old "$FILE" /var/www/media ; done wget --spider 'http://myscript.php' ; #exit 0 PS: As a little addition, I'd like to replace '.' with a 'space' just after the *.jpeg copy. My PHP script has some problem to define files with comma because of the extension. I'm finking about a command with find – like I did before – with a sed function? Is that a good idea?

  Read the article

• Specific issue on data pump API in oracle

  - by Median Hilal

  I have a client/server architecture. Using an Oracle dbms on the database server side. I need to perform a user-triggered (from client side) backup of the database, where the best way to perform that is using a stored procedure on the server side which the client may call, as the client has no oracle tools to perform the backup. I've searched thorough inside available solutions and have found that using a stored procedure is the best way. Well, then I found that using oracle data pump API is the best way to use inside a PL/SQl stored procedure. My specific questions about the API are... I would like to ask about two issues ... ---- The first ----- the detach function to detach the handler, is it necessary to be used at the end of the procedure? and what if I don't use it? I read the Oracle documentation but I didn't get their point, they say it doesn't terminate the job but indicates that the user is not interested in it, an when I use detach at the end of my procedure the exported .dmp file disappears. ---- The second ----- to perform a user (client side) triggered back up as the modification are only to the data, I used TABLE parameter for the export operation. But the version parameter... what should it be? I also read the documentation but couldn't determine what I need (LATEST or COMPATIBLE) ? Thanks

  Read the article

• 5 year old server upgrade

  - by rizzo0917

  I am looking to upgrade a server for a web app. Currently the application is running very sluggish. We've made some adjustments to mysql (that's another issue in itself) and made some adjustments so that heaviest quires get run on a copy of the database on another server was have as a backup, however this will not last that much longer and we are looking to upgrade. Currently the servers CPUs are (4) Intel(R) XEON(TM) CPU 2.00GHz, with 1 gig of ram. The database is 442.5 MiB, with about 1,743,808 records. There are two parts of the program, the one, side a, inserts and updates most of the data. Side b, reads the data and does some minor updates. Currently our biggest day for side a are 800 users (of 40,000 users all year) imputing the system. And our Side b is currently unknown, however we have a total of 1000 clients. The system is most likely going to cap out at 5000 side b clients, with about a year 300,000 side a users. The current database is 5 years old, so we can most likely expect the database to grow pretty rapidly, possibly double each year (which we can most likely archive older records if it comes to that). So with that being said, should we get a server for each side of the app, side a being the master, side b being the slave, any updates made on side b are router to side a. So the question is should i get 2 of these or 1. 2 x Intel Nehalem Xeon E5520 2.26Ghz (8 Cores) 12GB DDRIII Memory 500GB SATAII HDD 100Mbps Port Speed And Naturally I would need to have a redundant backup so it could potentially be 4 of them.

  Read the article

• buagent process has been consuming 100% cpu for two days

  - by Maysam

  The buagent process has been using 100% of cpu since two days ago. I want to terminate this process but I don't know if it's something dangerous or not (I am not much advanced in working with linux, indeed I am very beginner). The only thing that I know is that this process is probably restoring some files. But I think it is not normal for that to take more than two days. Now, do you think it would be OK if I kill this process? What command could I use to do that? I appreciate any help :) p.s. We are hosting a few web sites there. This server is also our Name Server and Mail Server as well. A couple of months a go we had a problem with the server which made us to take a full-backup of all files and then reinstall linux. Yesterday, I selected one of the directories on the backup server and restored that directory to a tmp directory on our linux server. After that, I couldn't restore any other directory because every time I want to do that, it says that there is another restore job running and I have to wait for that. When I use the "top" command I can see that the buagent process is consuming 100% of cpu. So I guess that is the problem. I don't know why it has been taking too long to execute.

  Read the article

• How can I restore the registry keys from another C drive? (Windows 7 64bit)

  - by graham3d

  I ran Uniblue registry booster on my system which was working fine. It did a full back up of the registry keys. Now I cannot boot from that disk. I also cannot get into the BIOS! To restore the registry I have to run Uniblue registry booster from within windows. I cannot get there. I can boot up on another C drive, and can see the files on the drive with the problem. Is there any way I can find the Registry Booster backup files and restore it from the other disk? Or find the registry backup and upload it into the registry so I can boot off the other disk again? Or, Can I do a windows repair from the other disk? NB: not getting in to the bios means I cannot boot off the CD/DVD! (I can use the DVD drive from within windows) Any ideas? I do not want to reinstall everything yet again, it takes about 6 hours.

  Read the article

• Efficient mirroring of directories using hard links [closed]

  - by zoqaeski

  I'm backing up my music collection on to a number of NTFS-formatted external hard-drives; however, as I store my main collection in FLAC and have my library on my laptop as MP3s to save space, I want to be able to back up both sets, because mass conversion between formats is time-consuming. The "music" directory can contain any format; the "mp3s" directory contains only MP3s converted from files in the "music" directory. The music collection on the laptop contains only MP3s, but they come from both sources. When I backup my laptop's library to the "mp3s" directory, I want to only copy across MP3 files that don't exist in the "music" directory; those that do should be hard-linked to the "music" directory. All directories have an identical hierarchy, sorted by artist, album, date, discnumber if applicable, etc, and I use a tagging editor to ensure consistency across all these locations. I'm also using a Linux computer, but keeping the music collections on NTFS-formatted partitions so that they are readable by both Linux and Windows. At the moment, I use the following command to perform the backups, but this is time-consuming due to the expensive nature of finding hard links. rsync -avu --progress --relative --ignore-existing --link-dest=../music/ **/*.mp3 /media/ntfspocket/mp3s Is there a way to perform this backup more efficiently, taking advantage of the directory hierarchy?

  Read the article

• very diferent results from df after few seconds

  - by tatus2

  When the backup moves the files from one to the other server the results from df changing every some seconds in impossible manner. On source host is running rsync. On destination host I'm running every few seconds following command: echo `date` `df|grep md0` Results are below: Sat Jun 29 23:57:12 CEST 2013 /dev/md0 4326425568 579316100 3527339636 15% /MD0 Sat Jun 29 23:57:14 CEST 2013 /dev/md0 4326425568 852513700 3254142036 21% /MD0 Sat Jun 29 23:57:15 CEST 2013 /dev/md0 4326425568 969970340 3136685396 24% /MD0 Sat Jun 29 23:57:17 CEST 2013 /dev/md0 4326425568 1255222180 2851433556 31% /MD0 Sat Jun 29 23:57:20 CEST 2013 /dev/md0 4326425568 1276006720 2830649016 32% /MD0 Sat Jun 29 23:57:24 CEST 2013 /dev/md0 4326425568 1355440016 2751215720 34% /MD0 Sat Jun 29 23:57:26 CEST 2013 /dev/md0 4326425568 1425090960 2681564776 35% /MD0 Sat Jun 29 23:57:27 CEST 2013 /dev/md0 4326425568 1474601872 2632053864 36% /MD0 Sat Jun 29 23:57:28 CEST 2013 /dev/md0 4326425568 1493627384 2613028352 37% /MD0 Sat Jun 29 23:57:32 CEST 2013 /dev/md0 4326425568 615934400 3490721336 15% /MD0 Sat Jun 29 23:57:33 CEST 2013 /dev/md0 4326425568 636071360 3470584376 16% /MD0 as you can see I start from USE of 15% and after 15 seconds I'm at 37% (I don't need to mention that the backup can not copy this huge amount of data in so short time). After ~20 sec the cycle closes. I'm again roughly by the same usage as earlier. The value is reasonable ca. 35 Mb were copied. Can somebody explain me what is going on? Does df only make an estimation of usage instead of used value?

  Read the article

• Downloading Emails locally with Thunderbird

  - by r_honey

  I am using Gmail (web interface) for sometime now, and have well over 20 labels and some thousand mails there archived to different labels in Gmail. Now I want to have a local copy of all my mails and following points are important in the context: The Primary mail access mechanism would continue to be Gmail web for me. I just want a backup of my mail account locally. Ideally the mails should download locally in folders named after Gmail labels (I know this is possible via IMAP but probably not by POP) After all my mails are available locally, I will delete most of them in Gmail to free up space and because I want to archive them. The mails should continue to exist locally and should not be deleted when I delete when from Gmail web interface. I would be syncing my gmail account locally let's say every month. So, the new mails that I have sent/received during this period should come over to my local mailbox in the folders named after Gmail labels. I do understand that Gmail maintains a single copy of email having 2 different labels and such email would get duplicated locally in the 2 folders and I am okay with that. Essentially you can see I just want to archive my mails from the Gmail server to a local backup and then sync (one way from Gmail to locally) new mails at regular intervals. For some points above, POP seems to be the option while IMAP seems for the others. I am really confused and need help in deciding which of POP or IMAP would suit me best. I have currently chosen Thunderbird to be my local email client but would not have a problem switching to Outlook or anything else as long as I get my desired archiving functionality.

  Read the article

• Iptables and system-config-firewall

  - by nivde92

  I had a set of netfilter rules set with iptables, but someone else told me to use system-config-firewall to add a rule for sharing files with Windows. (Samba) This rewrote the iptables rules file and I lost my own custom rules. I have a backup copy, but am having trouble restoring them. Edit: The server is Centos, I already tried to restore the rules with iptables-restore < /root/working.iptables.rules but for some reason the rules don't change. What are you trying to do? Trying to restore the iptable rules that I have in a backup file. What have you tried in order to make it happen? I've tried to modify the iptables file with vim, since the command iptables-restore was no help. What results did you expect? To get the old rules back. What actually happened? Nothing, when I run the command or edit the file by hand the file doesn't change at all. Maybe something else it's overwriting.

  Read the article

< Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >