telerik open access - Page 125

how to start LXDE session automatically after tightvncserver starts to make me able see desktop when connecting to the host via vncclient?

- by Oleksandr Dudchenko

I have system which is equipped with Intel Celeron processor 1.1 GHz s370 with 384 Mb of RAM on Intel d815egew motherboard which supports wake-on-lan function. I want to use such a PC for Internet sharing to the local network. Also this PC is a DHCP+DNS server as well as router/gateway. Based on above I decided to install Lubuntu as it is lightweight system. I installed Lubuntu 10.04.4 LTS from alternate ISO. System has no auto login. System boots and has acceptable performance. Host PC has onboard 4 network adapters: eth0 – ethernet controller which is used for Local Network connections. Has static address 10.0.0.1 eth1 – ethernet controller which is not used and not configured so far, I plan to connect printer here later on. eth2 - ethernet controller which is used to connect to Internet, which we plan to share for the local network wlan0 – wireless controller, it is used in role of access poit for local Network and has address 10.0.0.2 We want to control our gateway remotely. So, we need to be able to power it on remotely. To allow this I’ve done the following things: $ cd /etc/init.d/ made a new file with command $ sudo vim wakeonlanconfig Wrote the following lines to the newly created file, saved and closed it #!/bin/bash ethtool -s eth0 wol g ethtool -s eth2 wol g exit Made the abovementioned file executable $ sudo chmod a+x wakeonlanconfig Then included it into autostart sequence during boot. $ sudo update-rc.d -f wakeonlanconfig defaults after system reboot we will be able to poweron system remotely. Than we need to have a possibility to connect remotely to the host via SSH and VNC. So, I installed following packets with the following commands: $ sudo apt-get update $ sudo apt-get install openssh-server tightvncserver Add ssh daemon into autostart sequence during boot. $ sudo update-rc.d -f ssh defaults Power off the host PC $ sudo halt Then I went to remote place, send magic paket and powered the Host up. System started... And I connected to the host via Putty from remote system under Windows. Than logged in and run the command to start vnc server. $ tightvncserver -geometry 800x600 -depth 16 :2 VNC server successfully started and I got message like follows. New 'X' desktop is gateway:2 Starting applications specified in /home/dolv/.vnc/xstartup Log file is /home/dolv/.vnc/gateway:2.log Using UltraVNC Viewer programm under windows I connected to the host's vnc server, enterd the password and.... sow only mouse cursor in form of cross on a grey background of 800x600 dots, no desktop. Here is my .vnc/xstartup file #!/bin/sh xrdb $HOME/.Xresources xsetroot -solid grey #x-terminal-emulator -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" & #x-window-manager & # Fix to make GNOME work export XKL_XMODMAP_DISABLE=1 /etc/X11/Xsession The Question: What I have to change and where to make LXDE session start automatically after tightvncserver starts?

Read the article

Webcast Replay : SANS Institute Product Review of Oracle Identity Manager

- by B Shashikumar

Thanks to everyone who attended the SANS Institute webinar covering the product review of Oracle Identity Manager. And a special thanks to our guest speakers from SuperValu - Phillip Black and Patrick Abreo. If you missed the webcast, you can catch a replay here And here are the slides that were used in the webcast. There were many questions that we could not answer as we ran out of time. We have captured some of the questions with responses below. Is Oracle Identity Analytics still offered as a separate product or is it part of Oracle Identity Manager? Oracle Identity Manager and Oracle Identity Analytics are now offered as part of Oracle Identity Governance Suite. OIA and OIM share a common UI architecture, common data model and common support for connected and disconnected resources. When requesting new access/entitlements is there an approval process? Yes. We leverage SOA BPEL-based workflows for approvals Are the identity self service capabilities based on Oracle ADF? Yes they are completely based on Oracle ADF Can you give some examples of personalization and customization with Oracle Identity Manager 11gR2? With the new UI config framework we can enable different levels of UI customization. Customers now have the ability to Point & click to customize; or drag and drop customization without any need for coding. So users can easily personalize the interface of their application within the browser. For example, they can change the logo, Rearrange, hide Home Page regions; regularly searched items can be saved and re-used; Searchable & search results columns can be configured; Sorting preferences are remembered and so on. For more sophisticated customization, Customers can also edit the standard JSF within the page to alter business rules, modify page flows, page layouts and other items. Can you explain the role of sandboxes in customization? Customers can make their custom changes within a sandbox so that it doesn’t impact their production environment. They can make their changes, validate those changes, stage and then commit those changes without affecting production users. This is similar to how source code control systems like perforce work To watch a replay of the webcast, click here

Read the article

Best way to remote restart Ubuntu from Windows machine

- by robsoft

Background: I'm looking to put a series of Ubuntu machines into retail locations, they're being used as dumb kiosks to show a series of slides onto large LCD panel TV screens. Once installed, they won't have a keyboard or mouse connected but will have a fixed IP on the local network. Everything is configured to auto-start, no automatic updates, no power saving etc - I think we're pretty-much good to go apart from one thing. I need the retail staff to be able to restart the boxes if a problem arises. We have VNC running (now that we've turned off desktop enhancements!) so that we can remotely get into the machines if we need to, but that's not something we would allow the retail staff to do. The machines are going to be physically 'out of the way' (probably in the ceiling space) so the power button is not easily accessible!. I'd like to have some means of allowing the retail staff to restart the Ubuntu machine, from the desktop of one of their Windows terminals. I don't really want to give them some kind of raw terminal access (the command line will frighten them!) and I don't want them to use VNC (as stated above). Ideally there would be an icon on the Windows desktop, they double-click it, reply to a simple 'are you sure?' prompt, and then the Ubuntu box is told to restart. The Windows side of that won't be a problem, we can write something using Delphi, Python & Qt4, whatever - it's the Ubuntu side of it I'm stuck with. Out of sight/view, could I have a Windows program open a terminal across the network and tell Ubuntu to restart? Is this what SSH could be used for (I have never set that kind of thing up). The Windows programming side isn't really an issue, it's just that I'm a total Ubuntu noob and don't know where to start from the platform point of view. The other thing we considered is also having the machine automatically restart itself at a set time each day (obviously out of store hours!). To me, that seems a bit unnecessary (though forcing a restart once a week/month might be worthwhile). Any thoughts or suggestions? Being able to restart the box on demand across the network is my prime requirement.

Read the article

oocalc csv defaults to utf-8

- by picca

Everytime I open csv (comma separated values) document in oocalc (Open Office) i get dialog with csv preferences. And everytime character set is "Eastern Europe (ISO-8859-2)". I would like "UTF-8" to be defaultly selected.

Read the article

Book Review: Programming Windows Identity Foundation

- by DigiMortal

Programming Windows Identity Foundation by Vittorio Bertocci is right now the only serious book about Windows Identity Foundation available. I started using Windows Identity Foundation when I made my first experiments on Windows Azure AppFabric Access Control Service. I wanted to generalize the way how people authenticate theirselves to my systems and AppFabric ACS seemed to me like good point where to start. My first steps trying to get things work opened the door to whole new authentication world for me. As I went through different blog postings and articles to get more information I discovered that the thing I am trying to use is the one I am looking for. As best security API for .NET was found I wanted to know more about it and this is how I found Programming Windows Identity Foundation. What’s inside? Programming WIF focuses on architecture, design and implementation of WIF. I think Vittorio is very good at teaching people because you find no too complex topics from the book. You learn more and more as you read and as a good thing you will find that you can also try out your new knowledge on WIF immediately. After giving good overview about WIF author moves on and introduces how to use WIF in ASP.NET applications. You will get complete picture how WIF integrates to ASP.NET request processing pipeline and how you can control the process by yourself. There are two chapters about ASP.NET. First one is more like introduction and the second one goes deeper and deeper until you have very good idea about how to use ASP.NET and WIF together, what issues you may face and how you can configure and extend WIF. Other two chapters cover using WIF with Windows Communication Foundation (WCF) band Windows Azure. WCF chapter expects that you know WCF very well. This is not introductory chapter for beginners, this is heavy reading if you are not familiar with WCF. The chapter about Windows Azure describes how to use WIF in cloud applications. Last chapter talks about some future developments of WIF and describer some problems and their solutions. Most interesting part of this chapter is section about Silverlight. Who should read this book? Programming WIF is targeted to developers. It does not matter if you are beginner or old bullet-proof professional – every developer should be able to be read this book with no difficulties. I don’t recommend this book to administrators and project managers because they find almost nothing that is related to their work. I strongly recommend this book to all developers who are interested in modern authentication methods on Microsoft platform. The book is written so well that I almost forgot all things around me when I was reading the book. All additional tools you need are free. There is also Azure AppFabric ACS test version available and you can try it out for free. Table of contents Foreword Acknowledgments Introduction Part I Windows Identity Foundation for Everybody 1 Claims-Based Identity 2 Core ASP.NET Programming Part II Windows Identity Foundation for Identity Developers 3 WIF Processing Pipeline in ASP.NET 4 Advanced ASP.NET Programming 5 WIF and WCF 6 WIF and Windows Azure 7 The Road Ahead Index

Read the article

Designing An ACL Based Permission System

- by ryanzec

I am trying to create a permissions system where everything is going to be stored in MySQL (or some database) and pulled using PHP for a project management system I am building. I am right now trying to do it is an ACL kind of way. There are a number key features I want to be able to support: 1. Being able to assign permissions without being tied to a specific object. The reason for this is that I want to be able to selectively show/hide elements of the UI based on permissions at a point where I am not directly looking at a domain object instance. For instance, a button to create a new project should only should only be shown to users that have the pm.project.create permission but obviously you can assign a create permission to an domain object instance (as it is already created). 2. Not have to assign permissions for every single object. Obviously creating permissions entries for every single object (projects, tickets, comments, etc…) would become a nightmare to maintain so I want to have some level of permission inheritance. *3. Be able to filter queries based on permissions. This would be a really nice to have but I am not sure if it is possible. What I mean by this is say I have a page that list all projects. I want the query that pulls all projects to incorporate the ACL so that it would not show projects that the current user does not have pm.project.read access to. This would have to be incorporated into the main query as if it is a process that is done after that main query (which I know I could do) certain features like pagination become much more difficult. Right now this is my basic design for the tables: AclEntities id - the primary key key - the unique identifier for the domain object (usually the primary key of that object) parentId - the parent of the domain object (like the project object if this was a ticket object) aclDomainObjectId - metadata about the domain object AclDomainObjects id - primary key title - simple string to unique identify the domain object(ie. project, ticket, comment, etc…) fullyQualifiedClassName - the fully qualified class name for use in code (I am using namespaces) There would also be tables mapping AclEntities to Users and UserGroups. I also have this interface that all acl entity based object have to implement: IAclEntity getAclKey() - to the the unique key for this specific instance of the acl domain object (generally return the primary key or a concatenated string of a composite primary key) getAclTitle() - to get the unique title for the domain object (generally just returning a static string) getAclDisplayString() - get the string that represents this entity (generally one or more field on the object) getAclParentEntity() - get the parent acl entity object (or null if no parent) getAclEntity() - get the acl enitty object for this instance of the domain object (or null if one has not been created yet) hasPermission($permissionString, $user = null) - whether or not the user has the permission for this instance of the domain object static getFromAclEntityId($aclEntityId) - get a specific instance of the domain object from an acl entity id. Do any of these features I am looking for seems hard to support or are just way off base? Am I missing or not taking in account anything in my implementation? Is performance something I should keep in mind?

Read the article

Building an ASP.Net 4.5 Web forms application - part 4

- by nikolaosk

?his is the fourth post in a series of posts on how to design and implement an ASP.Net 4.5 Web Forms store that sells posters on line.There are 3 more posts in this series of posts.Please make sure you read them first.You can find the first post here. You can find the second post here. You can find the third post here. In this new post we will build on the previous posts and we will demonstrate how to display the posters per category.We will add a ListView control on the PosterList.aspx and will bind data from the database. We will use the various templates.Then we will write code in the PosterList.aspx.cs to fetch data from the database.1) Launch Visual Studio and open your solution where your project lives2) Open the PosterList.aspx page. We will add some markup in this page. Have a look at the code below <section class="posters-featured"> <ul> <asp:ListView ID="posterList" runat="server" DataKeyNames="PosterID" GroupItemCount="3" ItemType="PostersOnLine.DAL.Poster" SelectMethod="GetPosters"> <EmptyDataTemplate> <table id="Table1" runat="server"> <tr> <td>We have no data.</td> </tr> </table> </EmptyDataTemplate> <EmptyItemTemplate> <td id="Td1" runat="server" /> </EmptyItemTemplate> <GroupTemplate> <tr ID="itemPlaceholderContainer" runat="server"> <td ID="itemPlaceholder" runat="server"></td> </tr> </GroupTemplate> <ItemTemplate> <td id="Td2" runat="server"> <table> <tr> <td> </td> <td> <a href="PosterDetails.aspx?posterID=<%#:Item.PosterID%>"> <img src="<%#:Item.PosterImgpath%>" width="100" height="75" border="1"/></a> </td> <td> <a href="PosterDetails.aspx?posterID=<%#:Item.PosterID%>"> <span class="PosterName"> <%#:Item.PosterName%> </span> </a> <br /> <span class="PosterPrice"> <b>Price: </b><%#:String.Format("{0:c}", Item.PosterPrice)%> </span> <br /> </td> </tr> </table> </td> </ItemTemplate> <LayoutTemplate> <table id="Table2" runat="server"> <tr id="Tr1" runat="server"> <td id="Td3" runat="server"> <table ID="groupPlaceholderContainer" runat="server"> <tr ID="groupPlaceholder" runat="server"></tr> </table> </td> </tr> <tr id="Tr2" runat="server"><td id="Td4" runat="server"></td></tr> </table> </LayoutTemplate> </asp:ListView> </ul> </section> 3) We have a ListView control on the page called PosterList. I set the ItemType property to the Poster class and then the SelectMethod to the GetPosters method. I will create this method later on. (ItemType="PostersOnLine.DAL.Poster" SelectMethod="GetPosters")Then in the code below I have the data-binding expression Item available and the control becomes strongly typed.So when the user clicks on the link of the poster's category the relevant information will be displayed (photo,name and price) <td> <a href="PosterDetails.aspx?posterID=<%#:Item.PosterID%>"> <img src="<%#:Item.PosterImgpath%>" width="100" height="75" border="1"/></a> </td>4) Now we need to write the simple method to populate the ListView control.It is called GetPosters method.The code follows public IQueryable<Poster> GetPosters([QueryString("id")] int? PosterCatID) { PosterContext ctx = new PosterContext(); IQueryable<Poster> query = ctx.Posters; if (PosterCatID.HasValue && PosterCatID > 0) { query = query.Where(p=>p.PosterCategoryID==PosterCatID); } return query; } This is a very simple method that returns information about posters related to the PosterCatID passed to it.I bind the value from the query string to the PosterCatID parameter at run time.This is all possible due to the QueryStringAttribute class that lives inside the System.Web.ModelBinding and gets the value of the query string variable id.5) I run my application and then click on the "Midfilders" link. Have a look at the picture below to see the results. In the Site.css file I added some new CSS rules to make everything more presentable. .posters-featured { width:840px; background-color:#efefef;}.posters-featured a:link, a:visited, a:active, a:hover { color: #000033; }.posters-featured a:hover { background-color: #85c465; } 6) I run the application again and this time I do not choose any category, I simply navigate to the PosterList.aspx page. I see all the posters since no query string was passed as a parameter.Have a look at the picture below ?ake sure you place breakpoints in the code so you can see what is really going on.In the next post I will show you how to display poster details.Hope it helps!!!

Read the article

Tomcat 6: Access Control Exception?

- by iftrue

I'm trying to setup a tomcat6 server, and I'm trying to match another setup someone else established. However, my deployment (default Ubuntu install) uses a policy.d/ directory structure, and the established server just uses a catalina.policy file. I've tried setting every entry in policy.d to match the given catalina.policy, but I still get the following stacktrace on boot (from localhost log). I have two questions, then. First, how do I get tomcat to use a single poilcy file, rather than the directory structure presented by policy.d/? Secondly, why, when I specify all files to use the same policy, do I still get the stack trace below? Stack trace: SEVERE: Servlet /myapp threw load() exception java.security.AccessControlException: access denied (java.lang.RuntimePermission accessClassInPackage.org.apache.jasper) at java.security.AccessControlContext.checkPermission(AccessControlContext.java:342) at java.security.AccessController.checkPermission(AccessController.java:553) at java.lang.SecurityManager.checkPermission(SecurityManager.java:549) at java.lang.SecurityManager.checkPackageAccess(SecurityManager.java:1529) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:291) at java.lang.ClassLoader.loadClass(ClassLoader.java:264) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1314) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1245) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:332) at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:616) at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:244) at java.security.AccessController.doPrivileged(Native Method) at javax.security.auth.Subject.doAsPrivileged(Subject.java:537) at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:276) at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162) at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:115) at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1166) at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:992) at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4058) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4367) at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:791) at org.apache.catalina.core.ContainerBase.access$000(ContainerBase.java:123) at org.apache.catalina.core.ContainerBase$PrivilegedAddChild.run(ContainerBase.java:145) at java.security.AccessController.doPrivileged(Native Method) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:769) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:525) at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:978) at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:941) at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:499) at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1201) at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:318) at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:117) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1053) at org.apache.catalina.core.StandardHost.start(StandardHost.java:719) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045) at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443) at org.apache.catalina.core.StandardService.start(StandardService.java:516) at org.apache.catalina.core.StandardServer.start(StandardServer.java:710) at org.apache.catalina.startup.Catalina.start(Catalina.java:578) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:616) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:616) at org.apache.commons.daemon.support.DaemonLoader.start(DaemonLoader.java:177) Policy.d grant codeBase "file:${java.home}/lib/-" { permission java.security.AllPermission; }; // These permissions apply to all shared system extensions grant codeBase "file:${java.home}/jre/lib/ext/-" { permission java.security.AllPermission; }; // These permissions apply to javac when ${java.home] points at $JAVA_HOME/jre grant codeBase "file:${java.home}/../lib/-" { permission java.security.AllPermission; }; // These permissions apply to all shared system extensions when // ${java.home} points at $JAVA_HOME/jre grant codeBase "file:${java.home}/lib/ext/-" { permission java.security.AllPermission; }; // ========== CATALINA CODE PERMISSIONS ======================================= // These permissions apply to the daemon code grant codeBase "file:${catalina.home}/bin/commons-daemon.jar" { permission java.security.AllPermission; }; // These permissions apply to the logging API grant codeBase "file:${catalina.home}/bin/tomcat-juli.jar" { permission java.util.PropertyPermission "java.util.logging.config.class", "read"; permission java.util.PropertyPermission "java.util.logging.config.file", "read"; permission java.io.FilePermission "${java.home}${file.separator}lib${file.separator}logging.properties", "read"; permission java.lang.RuntimePermission "shutdownHooks"; permission java.io.FilePermission "${catalina.base}${file.separator}conf${file.separator}logging.properties", "read"; permission java.util.PropertyPermission "catalina.base", "read"; permission java.util.logging.LoggingPermission "control"; permission java.io.FilePermission "${catalina.base}${file.separator}logs", "read, write"; permission java.io.FilePermission "${catalina.base}${file.separator}logs${file.separator}*", "read, write"; permission java.lang.RuntimePermission "getClassLoader"; // To enable per context logging configuration, permit read access to the appropriate file. // Be sure that the logging configuration is secure before enabling such access // eg for the examples web application: // permission java.io.FilePermission "${catalina.base}${file.separator}webapps${file.separator}examples${file.separator}WEB-INF${file.separator}classes${file.separator}logging.properties", "read"; }; // These permissions apply to the server startup code grant codeBase "file:${catalina.home}/bin/bootstrap.jar" { permission java.security.AllPermission; }; // These permissions apply to the servlet API classes // and those that are shared across all class loaders // located in the "lib" directory grant codeBase "file:${catalina.home}/lib/-" { permission java.security.AllPermission; }; // ========== WEB APPLICATION PERMISSIONS ===================================== // These permissions are granted by default to all web applications // In addition, a web application will be given a read FilePermission // and JndiPermission for all files and directories in its document root. grant { // Required for JNDI lookup of named JDBC DataSource's and // javamail named MimePart DataSource used to send mail permission java.util.PropertyPermission "java.home", "read"; permission java.util.PropertyPermission "java.naming.*", "read"; permission java.util.PropertyPermission "javax.sql.*", "read"; // OS Specific properties to allow read access permission java.util.PropertyPermission "os.name", "read"; permission java.util.PropertyPermission "os.version", "read"; permission java.util.PropertyPermission "os.arch", "read"; permission java.util.PropertyPermission "file.separator", "read"; permission java.util.PropertyPermission "path.separator", "read"; permission java.util.PropertyPermission "line.separator", "read"; // JVM properties to allow read access permission java.util.PropertyPermission "java.version", "read"; permission java.util.PropertyPermission "java.vendor", "read"; permission java.util.PropertyPermission "java.vendor.url", "read"; permission java.util.PropertyPermission "java.class.version", "read"; permission java.util.PropertyPermission "java.specification.version", "read"; permission java.util.PropertyPermission "java.specification.vendor", "read"; permission java.util.PropertyPermission "java.specification.name", "read"; permission java.util.PropertyPermission "java.vm.specification.version", "read"; permission java.util.PropertyPermission "java.vm.specification.vendor", "read"; permission java.util.PropertyPermission "java.vm.specification.name", "read"; permission java.util.PropertyPermission "java.vm.version", "read"; permission java.util.PropertyPermission "java.vm.vendor", "read"; permission java.util.PropertyPermission "java.vm.name", "read"; // Required for OpenJMX permission java.lang.RuntimePermission "getAttribute"; // Allow read of JAXP compliant XML parser debug permission java.util.PropertyPermission "jaxp.debug", "read"; // Precompiled JSPs need access to this package. permission java.lang.RuntimePermission "accessClassInPackage.org.apache.jasper.runtime"; permission java.lang.RuntimePermission "accessClassInPackage.org.apache.jasper.runtime.*"; // Precompiled JSPs need access to this system property. permission java.util.PropertyPermission "org.apache.jasper.runtime.BodyContentImpl.LIMIT_BUFFER", "read"; };

Read the article

Propose Unity Feature: Open Apps in the upper side of the Unity Launcher [closed]

- by user52159

Possible Duplicate: What is the best medium for sending feature requests? I don't know if this is the right place to propose a feature. If someone can guide me to the correct forum, he's welcome. I want to propose that the opened applications appear in the upper side of the Unity Launcher. Since I think that those are the icons we'll click most of the time and, of course, those that we are working with at the moment.

Read the article

An Open Letter from Lyle Ekdahl, Group Vice President and General Manager, Oracle's JD Edwards

- by Brian Dayton

From Lyle Ekdahl, Group Vice President and General Manager, Oracle's JD Edwards As you may have heard, we recently announced some changes to the way Oracle will offer licensing of technology products with JD Edwards EnterpriseOne. Specifically, we have withdrawn from new sales the product known as JD Edwards EnterpriseOne Technology Foundation ("Blue Stack"). Our motivation for this change is simply to streamline licensing for our customers. Going forward, customers will license Oracle products from Oracle and IBM products from IBM. Customers who are currently licensed for Technology Foundation will continue to receive support--unchanged--through September 30, 2016. This announcement affects how customers license these IBM products; it does not affect Oracle's certification roadmap for IBM products with JD Edwards EnterpriseOne. Customers who are currently running their JD Edwards EnterpriseOne infrastructure using IBM platform components can continue to do so regardless of whether they license these components via Technology Foundation or directly from IBM. New customers choosing to run JD Edwards EnterpriseOne on IBM technology should license JD Edwards EnterpriseOne Core Tools from Oracle while licensing Infrastructure and any licenses of IBM products from IBM. For more information about this announcement, customers should refer to My Oracle Support article 1232453.1 Questions included in the "Frequently Asked Questions" document on My Oracle Support: Is Oracle dropping support for IBM DB2 and IBM WebSphere with JD Edwards EnterpriseOne? No. This announcement affects how customers license these IBM products; it does not affect Oracle's certification roadmap for these products. The JD Edwards EnterpriseOne matrix of supported databases, web servers, and portals remains unchanged, including planned support for IBM DB2, IBM WebSphere Application Server, and IBM WebSphere Portal. Customers who are currently running their JD Edwards EnterpriseOne infrastructure using IBM platform components can continue to do so regardless of whether they license these components via Technology Foundation or directly from IBM. As always, the timing and versions of such third-party certifications remain at Oracle's discretion. Does this announcement mean that Oracle is withdrawing support for JD Edwards EnterpriseOne on the IBM i platform? Absolutely not. JD Edwards EnterpriseOne support on the IBM i platform remains unchanged. This announcement simply states that customers will acquire Oracle products from Oracle and IBM products from IBM. In fact, as evidenced by the recent "IBM i Solution Edition for JD Edwards" offering, IBM and the JD Edwards product teams continue to innovate and offer attractive, cost-competitive solutions to the ERP marketplace. For more information about this offering see: http://www-03.ibm.com/systems/i/advantages/oracle/. I hope this clarifies any concerns. Let me know if you have any additional questions or concerns. -Lyle

Read the article

QotD: Alex Buckley announcing Java™ SE 8 Early Access Builds with Type Annotation Support

- by $utils.escapeXML($entry.author)

I am pleased to announce that binary builds of the JSR 308 Reference Implementation are available at http://jdk8.java.net/type-annotations/.Please see the Type Annotations project page for a link to the JSR 308 Specification. There is also a changelog, which is important to review as there have been significant spec changes in 2012.The builds were generated from the type-annotations/type-annotations forest on 9/9. This forest is regularly updated from jdk8/jdk8 and jdk8/tl.Alex Buckley in a post on the type-annotations-dev mailing list.If you want to play with repeating annotations, check out http://jdk8.java.net/type-annotations/ ... thanks to superior code wrangling by Joel Franck (repeating annotations) and Werner Dietl (type annotations), support for repeating annotations on declarations is included in the build.Alex Buckley in a post on the enhanced-metadata-spec-discuss mailing list.

Read the article

Working with Compressed (zipped) folders in MS Access

Doug Steele presents a simple technique to add zip files from within your application.

Read the article

SQL Server Driver for PHP 2.0 CTP adds PHP's PDO style data access for SQL Server

- by The Official Microsoft IIS Site

Today at DrupalCon SF 2010, we are reaching an important milestone by releasing a Community Technology Preview (CTP) of the new SQL Server Driver for PHP 2.0 , which includes support for PHP Data Objects (PDO). Alongside our efforts, the Commerce Guys , a company providing ecommerce solutions with Drupal, is also presenting a beta version of Drupal 7 running on SQL Server using this new PDO Application Programming Interfaces (API) in the SQL Server Driver for PHP 2.0. Providing a PDO driver in SQL...(read more)

Read the article

Opinion: Open Firefox vs. Closed Internet Explorer 9

Microsoft's Internet Explorer 9 is now out for developers to try out and test -- well kinda/sorta. Is it really a Web browser?

Read the article

Uses for Cartesian Products in MS Access

Less well known than inner and outer joins is the Cartesian product, which produces every possible combination of records between the two tables. Doug Steele offers four examples to demonstrate some legitimate uses for Cartesian products.

Read the article

SQL Server – SafePeak “Logon Trigger” Feature for Managing Data Access

- by pinaldave

Lately I received an interesting question about the abilities of SafePeak for SQL Server acceleration software: Q: “I would like to use SafePeak to make my CRM application faster. It is an application we bought from some vendor, after a while it became slow and we can’t reprogram it. SafePeak automated caching sounds like an easy and good solution for us. But, in my application there are many servers and different other applications services that address its main database, and some even change data, and I feel that there is a chance that some servers that during the connection process we may miss some. Is there a way to ensure that SafePeak will be aware of all connections to the SQL Server, so its cache will remain intact?” Interesting question, as I remember that SafePeak (http://www.safepeak.com/Product/SafePeak-Overview) likes that all traffic to the database will go thru it. I decided to check out the features of SafePeak latest version (2.1) and seek for an answer there. A: Indeed I found SafePeak has a feature they call “Logon Trigger” and is designed for that purpose. It is located in the user interface, under: Settings -> SQL instances management -> [your instance] -> [Logon Trigger] tab. From here you activate / deactivate it and control a white-list of enabled server IPs and Login names that SafePeak will ignore them. Click to Enlarge After activation of the “logon trigger” Safepeak server is notified by the SQL Server itself on each new opened connection. Safepeak monitors those connections and decides if there is something to do with them or not. On a typical installation SafePeak likes all application and users connections to go via SafePeak – this way it knows about data and schema updates immediately (real time). With activation of the safepeak “logon trigger” a special CLR trigger is deployed on the SQL server and notifies Safepeak on any connection that has not arrived via SafePeak. In such cases Safepeak can act to clear and lock the cache or to ignore it. This feature enables to make sure SafePeak will be aware of all connections so SafePeak cache will maintain exactly correct all times. So even if a user, like a DBA will connect to the SQL Server not via SafePeak, SafePeak will know about it and take actions. The notification does not impact the work of that connection, the user or application still continue to do whatever they planned to do. Note: I found that activation of logon trigger in SafePeak requires that SafePeak SQL login will have the next permissions: 1) CONTROL SERVER; 2) VIEW SERVER STATE; 3) And the SQL Server instance is CLR enabled; Seeing SafePeak in action, I can say SafePeak brings fantastic resource for those who seek to get performance for SQL Server critical apps. SafePeak promises to accelerate SQL Server applications in just several hours of installation, automatic learning and some optimization configuration (no code changes!!!). If better application and database performance means better business to you – I suggest you to download and try SafePeak. The solution of SafePeak is indeed unique, and the questions I receive are very interesting. Have any more questions on SafePeak? Please leave your question as a comment and I will try to get an answer for you. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Open Source NoSQL Databases Ramp Up

<b>Database Journal:</b> "For most of the Web era, Relational Database Management Systems (RDBMS) based on SQL have dominated the database landscape. But over the course of the last year, a new approach has begun to take hold known as NoSQL, offering an alternative to the traditional RDBMS."

Read the article

Open Source NoSQL Databases Ramp Up

NoSQL databases offer an alternative to traditional relational databases, but they might not be the right fit for everyone.

Read the article

An open source FileManagement component helps developing file-required systems easier in .NET

The component is designed to save the effort on developing file-required systems through its easy APIs and integration with ASP.NET web development, e.g. a product requires attachments and thumbnails in a product management system....Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

An open source FileManagement component helps developing file-required systems easier in .NET

The component is designed to save the effort on developing file-required systems through its easy APIs and integration with ASP.NET web development, e.g. a product requires attachments and thumbnails in a product management system.

Read the article

Open Your Windows - 4/Maio/10

- by Claudia Costa

This FREE technical briefing is designed to show ISVs/SIs how to leverage the Oracle11g Technology especially in the small to medium business. The briefing focuses on Oracle's 11g platform on Windows & Linux and gives a very comprehensive technical competitive overview to the products offered by Microsoft. The technical part covers Integration and Migration aspects of various Microsoft products such as SQL Server, .NET and Active Directory. Register Today! With Oracle11g Oracle introduced various products (ApplicationExpress, OracleExpress Edition, ADF, BPEL) and licenses (Oracle Database Standard Edition One, Application Server Java Edition) specifically targetting the small to medium business market and to show that Oracle Database and Application Server are as easy to use and costs less than Microsoft products in terms of purchase price and ongoing support & maintenance and even much much less when considering the Linux platform.. For those ISVs have already adopted Microsoft .NET framework and using SQL Server as their database layer, we will demostrate that Oracle11g Database is as easy as SQL Server to install, configure, and manage. In addition to that, their application development .NET platform does not requires dramatic changes to enable it to run on the Oracle database. Besides the standard functionalities, Oracle has enhanced some of the advanced features; such as Intermedia, Security, Ref Cursor, etc., tightly integrated with .NET framework so that .NET developers can take full advantage of the Oracle technology, without worrying or programming the complexity components. Objectives · Understand Oracle's strategy and commitment on Windows & Linux · Learn how to migrate from SQL Server to Oracle on Windows AND Linux · Understand that Oracle11g is easy to manage and to install on Windows & Linux · Learn how to integrate Windows products with the Oracle11g Platform · Learn how Oracle products interoperate & integrate with Microsoft .NET · Learn how an Oracle database on Windows will easily be ported to a lower cost Linux database platform and interoperate with a .NET application Prerequisites General Operating System expertise including MS-Windows and Linux. Agenda · Welcome and Intro · Oracle at a glance · Strategy; Small to Medium Business, Microsoft and Linux · Oracle 11g Architecture on Linux & Windows · Managing Oracle 11g on Linux & Windows · Application Development · Migration · Value propositions for ISVs & Wrap-up ---------------------------------------------------------------------------- Para mais informações/inscrições, contacte: [email protected].

Read the article

Access : Afficher vos données dans des labels, zones de texte, par Jean-Damien Gayot

Il peut être judicieux, à l'ouverture de l'application, de pouvoir afficher quelques chiffres-clés. On peut tout à fait afficher des résultats dans un simple Label ou dans une Zone de Texte.

Read the article

Types of Open

- by EmbeddedInsider

Good post here from Bill Anderson http://scienceblogs.com/bookoftrogool/2010/03/battle_of_the_opens.php

Read the article

Applications are now open for the Microsoft Accelerator for Windows Azure - 2013

- by ScottGu

In October, I introduced the finalists for the Microsoft Accelerator for Windows Azure, powered by TechStars. Over the past couple of months, these startups have been mentored by business and technology leaders, met with investors, learned from each other, and, most importantly, been building great products. You can learn more about the startups in the first class and how they’re using Windows Azure here. As the first class approaches Demo Day on January 17th, I’m happy to announce that today we are opening applications for the second class of the Microsoft Accelerator for Windows Azure. The second class will begin on April 1,, 2013 and conclude with Demo Day on June 26, 2013. If you are currently working at a startup or considering founding your own company, I encourage you to apply. We’re accepting applications through February 1st, 2013. You can find more information about the Accelerator and the application process here. It’s been truly inspiring to work with the current class of startups. This inaugural class has brought with them incredible energy and innovation and I look forward to reviewing the applications for this next class. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Read the article

Build Open JDK 7 on Mac OSX (TOTD #172)

- by arungupta

The complete requirements, pre-requisites, and steps to build OpenJDK 7 port on Mac OSX are described here. The steps are very clearly explained and here are the exact ones I followed on my MacBook Pro 10.7.2: Confirm the version of pre-installed Java as: > java -versionjava version "1.6.0_26"Java(TM) SE Runtime Environment (build 1.6.0_26-b03-383-11A511c)Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02-383, mixed mode) Download and install Mercurial from mercurial.berkwood.com (zip bundle for 10.7 is here). It gets installed in the /usr/local/bin directory. Get the source code as (commands highlighted in bold): hg clone http://hg.openjdk.java.net/macosx-port/macosx-port destination directory: macosx-port requesting all changes adding changesets adding manifests adding file changes added 437 changesets with 364 changes to 33 files updating to branch default 31 files updated, 0 files merged, 0 files removed, 0 files unresolved cd macosx-port chmod 7555 get_source.sh ./get_source.sh # Repos: corba jaxp jaxws langtools jdk hotspot Starting on corba Starting on jaxp Starting on jaxws Starting on langtools Starting on jdk Starting on hotspot # hg clone http://hg.openjdk.java.net/macosx-port/macosx-port/corba corba requesting all changes adding changesets adding manifests adding file changes added 396 changesets with 3275 changes to 1379 files . . . # exit code 0 # cd ./corba && hg pull -u pulling from http://hg.openjdk.java.net/macosx-port/macosx-port/corba searching for changes no changes found # exit code 0 # cd ./jaxp && hg pull -u pulling from http://hg.openjdk.java.net/macosx-port/macosx-port/jaxp searching for changes no changes found # exit code 0 Install Xcode from the App Store. Include /Developer/usr/bin in PATH. Note: JDK 1.6.0_26 ame pre-installed on my laptop and I installed Xode after that. The compilation went fine and there was no need to re-install the Java for Mac OS X as mentioned in the original steps. Build the code as: make ALLOW_DOWNLOADS=true SA_APPLE_BOOT_JAVA=true ALWAYS_PASS_TEST_GAMMA=true ALT_BOOTDIR=`/usr/libexec/java_home -v 1.6` HOTSPOT_BUILD_JOBS=`sysctl -n hw.ncpu` The final output is shown as: >>>Finished making images @ Sat Nov 19 00:59:04 WET 2011 ... >>>Finished making images @ Sat Nov 19 00:59:04 WET 2011 ...############################################################################# Leaving jdk for target(s) sanity all docs images ################################################################################## Build time 00:17:42 jdk for target(s) sanity all docs images ############################################################################### Build times ##########Target all_product_buildStart 2011-11-19 00:32:40End 2011-11-19 00:59:0400:01:46 corba00:04:07 hotspot00:00:51 jaxp00:01:21 jaxws00:17:42 jdk00:00:37 langtools00:26:24 TOTAL######################### Change the directory and verify the version: >cd build/macosx-universal/j2sdk-image/1.7.0.jdk/Contents/Home/bin >./java -version openjdk version "1.7.0-internal" OpenJDK Runtime Environment (build 1.7.0-internal-arungup_2011_11_19_00_32-b00) OpenJDK 64-Bit Server VM (build 21.0-b17, mixed mode) Now go fix some bugs, file new bugs, or discuss at the macosx-port-dev mailing list.

Search Results

Search found 57750 results on 2310 pages for 'telerik open access'.

Page 125/2310 | < Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132 | Next Page >

- by Oleksandr Dudchenko

- by B Shashikumar

- by robsoft

- by picca

- by DigiMortal

- by ryanzec

- by nikolaosk

- by iftrue

- by user52159

- by Brian Dayton

- by $utils.escapeXML($entry.author)

- by The Official Microsoft IIS Site

- by pinaldave

- by Claudia Costa

- by EmbeddedInsider

- by ScottGu

- by arungupta

< Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132 | Next Page >