Search Results

Search found 13437 results on 538 pages for 'trusted root certificates'.

Page 125/538 | < Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >

  • Can I remove all-caps and shorten the disclaimer on my License?

    - by stefano palazzo
    I am using the MIT License for a particular piece of code. Now, this license has a big disclaimer in all-caps: THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF... ... I've seen a normally capitalised disclaimer on the zlib license (notice that it is above the license text), and even software with no disclaimer at all (which implies, i take it, that there is indeed a guarantee?), but i'd like some sourced advice by a trusted party. I just haven't found any. GNU's License notice for other files comes with this disclaimer: This file is offered as-is, without any warranty. Short and simple. My question therefore: Are there any trusted sources indicating that a short rather than long, and a normally spelled rather than capitalised disclaimer (or even one or the other) are safely usable in all of the jurisdictions I should be concerned with? If the answer turns out to be yes: Why not simply use the short license notice that the fsf proposes for readme-files and short help documents instead of the MIT License? Is there any evidence suggesting this short 'license' will not hold up? For the purposes of this question, the software is released in the European Union, should it make any difference.

    Read the article

  • Commands don't have permission when using absolute path

    - by Markos
    I have folders set up this way: /srv/samba/video getfacl /srv/samba/video # file: srv/samba/video # owner: root # group: nogroup user::rwx group::--- group:sambaclients:rwx group:deluge:rwx mask::rwx other::--- default:user::rwx default:group::--- default:group:sambaclients:rwx default:group:deluge:rwx default:mask::rwx default:other::--- That means, user deluge has rwx to folder /srv/samba/video. However, when running command as user deluge, I am getting weird permission errors. When in folder /srv/samba/video: sudo -u deluge mkdir foo works flawlessly. But when using absolute path: sudo -u deluge mkdir /srv/samba/video/foo I am getting permission denied. When running sudo -u deluge id, I get output uid=113(deluge) gid=124(deluge) skupiny=124(deluge) which shows that user deluge is indeed in group deluge. Also, the behavior was the same when I gave the permissions also to user deluge not just group deluge. When executing as non-system user, it does work. The reason that I want to use absolute paths is that I am using automatically triggered post-download script which extracts some files into the folder. I have spent way too many hours to solve this problem myself. mkdir isn't the only command that fails, touch is doing the same thing, so I suspect that it's not mkdir's fault. If you need more info, I will try to put it in here, just ask. Thanx in advance. Edit: It seems that the root of the problem is acl set on perent folder /srv/samba, which indeed does not grant permissions to deluge (but neither denies it). getfacl /srv/samba # file: srv/samba # owner: root # group: nogroup user::rwx group::--- group:sambaclients:rwx mask::rwx other::--- default:user::rwx default:group::--- default:group:sambaclients:rwx default:mask::rwx default:other::--- If I grant the permission also to this folder, it suddenly starts to work so I believe that the acl on /srv/samba is somehow denying the permissions to deluge. So the question is: how do I set acl to both /srv/samba and /srv/samba/video so that sambaclients have access to whole /srv/samba and subdirectories and deluge has access only to /srv/samba/video and subdirectories?

    Read the article

  • Setup for mounting kerberized nfs home directory - gssd not finding valid kerberos ticket

    - by janm
    Our home directories are exported via kerberized nfs, so the user needs a valid kerberos ticket to be able to mount its home. This setup works fine with our existing clients & server. Now we want to add some 11.10 client and thus set up ldap & kerberos together with pam_mount. The ldap authentication works and users can login via ssh, however their homes can not be mounted. When pam_mount is configured to mount as root, gssd does not find a valid kerberos ticket and the mount fails. Nov 22 17:34:26 zelda rpc.gssd[929]: handle_gssd_upcall: 'mech=krb5 uid=0 enctypes=18,17,16,23,3,1,2 ' Nov 22 17:34:26 zelda rpc.gssd[929]: handling krb5 upcall (/var/lib/nfs/rpc_pipefs/nfs/clnt2) Nov 22 17:34:26 zelda rpc.gssd[929]: process_krb5_upcall: service is '<null>' Nov 22 17:34:26 zelda rpc.gssd[929]: getting credentials for client with uid 0 for server purple.physcip.uni-stuttgart.de Nov 22 17:34:26 zelda rpc.gssd[929]: CC file '/tmp/krb5cc_65678_Ku2226' being considered, with preferred realm 'PURPLE.PHYSCIP.UNI-STUTTGART.DE' Nov 22 17:34:26 zelda rpc.gssd[929]: CC file '/tmp/krb5cc_65678_Ku2226' owned by 65678, not 0 Nov 22 17:34:26 zelda rpc.gssd[929]: WARNING: Failed to create krb5 context for user with uid 0 for server purple.physcip.uni-stuttgart.de Nov 22 17:34:26 zelda rpc.gssd[929]: doing error downfall When pam_mount is on the other hand configured with the noroot=1 option, then it cannot mount the volume at all. Nov 22 17:33:58 zelda sshd[2226]: pam_krb5(sshd:auth): user phy65678 authenticated as [email protected] Nov 22 17:33:58 zelda sshd[2226]: Accepted password for phy65678 from 129.69.74.20 port 51875 ssh2 Nov 22 17:33:58 zelda sshd[2226]: pam_unix(sshd:session): session opened for user phy65678 by (uid=0) Nov 22 17:33:58 zelda sshd[2226]: pam_mount(mount.c:69): Messages from underlying mount program: Nov 22 17:33:58 zelda sshd[2226]: pam_mount(mount.c:73): mount: only root can do that Nov 22 17:33:58 zelda sshd[2226]: pam_mount(pam_mount.c:521): mount of /Volumes/home/phy65678 failed So how can we allow users of a specific group to perform nfs mounts? If this does not work, can we make pam_mount use root but pass the correct uid?

    Read the article

  • "Size mismatch" apt error when installing openJDK

    - by siddanth
    when i try install openjdk-7-jre-headless i am getting the following error: Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: ca-certificates-java icedtea-7-jre-jamvm java-common libcups2 libjpeg62 liblcms2-2 libnspr4 libnss3 libnss3-1d openjdk-7-jre-lib tzdata tzdata-java Suggested packages: default-jre equivs cups-common liblcms2-utils libnss-mdns sun-java6-fonts ttf-dejavu-extra ttf-baekmuk ttf-unfonts ttf-unfonts-core ttf-sazanami-gothic ttf-kochi-gothic ttf-sazanami-mincho ttf-kochi-mincho ttf-wqy-microhei ttf-wqy-zenhei ttf-indic-fonts-core ttf-telugu-fonts ttf-oriya-fonts ttf-kannada-fonts ttf-bengali-fonts The following NEW packages will be installed: ca-certificates-java icedtea-7-jre-jamvm java-common libcups2 libjpeg62 liblcms2-2 libnspr4 libnss3 libnss3-1d openjdk-7-jre-headless openjdk-7-jre-lib tzdata-java The following packages will be upgraded: tzdata 1 upgraded, 12 newly installed, 0 to remove and 122 not upgraded. Need to get 41.2 MB/43.5 MB of archives. After this operation, 64.0 MB of additional disk space will be used. Get:5 http://in.archive.ubuntu.com/ubuntu/ oneiric/main java-common all 0.42ubuntu2 [62.4 kB] Fetched 41.1 MB in 4min 5s (167 kB/s) Failed to fetch http://in.archive.ubuntu.com/ubuntu/pool/main/j/java-common/java-common_0.42ubuntu2_all.deb Size mismatch E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? am unable to solve this. Am i missing something? please help me out in solving this.

    Read the article

  • Cannot install openjdk on Hardy Heron

    - by infaustus
    I know that Hardy Heron is very old but don't ask why Hardy... I've tried root@vz10931:/etc/apt# apt-get install openjdk-6-jre Reading package lists... Done Building dependency tree Reading state information... Done You might want to run `apt-get -f install' to correct these: The following packages have unmet dependencies: openjdk-6-jre: Depends: libasound2 (> 1.0.14) but it is not going to be installed Depends: libgif4 (>= 4.1.6) but it is not going to be installed Depends: libxtst6 but it is not going to be installed Depends: openjdk-6-jre-headless (>= 6b18-1.8.3-0ubuntu1~8.04.2) but it is not going to be installed vim: Depends: vim-common (= 1:7.1-138+1ubuntu3.1) but 2:7.3.154+hg~74503f6ee649-2ubuntu3 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). My sources.list deb http://pl.archive.ubuntu.com/ubuntu/ hardy main restricted universe multiverse deb-src http://pl.archive.ubuntu.com/ubuntu/ hardy main restricted universe multiverse deb http://pl.archive.ubuntu.com/ubuntu/ hardy-updates main restricted universe multiverse deb-src http://pl.archive.ubuntu.com/ubuntu/ hardy-updates main restricted universe multiverse deb http://security.ubuntu.com/ubuntu hardy-security main restricted universe multiverse deb-src http://security.ubuntu.com/ubuntu hardy-security main restricted universe multiverse And root@vz10931:/etc/apt# ls -l sources.list.d/ total 0 Please help. When I've tried apt-get install -f I had install new system because everything crashed. Edit: I checked that i have openjdk installed root@vz10931:/var/www/mailer# dpkg --list | grep java iU sun-java6-bin 6.24-1build0.8.04.1 Sun Java(TM) Runtime Environment (JRE) 6 (ar iU sun-java6-jdk 6.24-1build0.8.04.1 Sun Java(TM) Development Kit (JDK) 6 iU sun-java6-jre 6.24-1build0.8.04.1 Sun Java(TM) Runtime Environment (JRE) 6 (ar but when i am trying to start java file: java -jar program.jar error appear -bash: java: command not found

    Read the article

  • Webmaster Tools, www and no-www, duplicate content and subdomains

    - by Jay
    I have not come to any conclusive answers on the following after many hours of research on many websites to the specific issue that I am trying to figure out. My company has two websites a main one at www.example.com and one at subdomain.example.com which is a subdomain of the first and is our self hosted blog. The way Google sees these with the www or no-www (called naked for now on) is that each of these actually are different when the www or naked version is used/not used in the front of the domain. I completely understand this. It is also advised that both should be set up in the Google Webmaster Tools, which I have done. Correct me if I am wrong on that in regard to having both set up. Now the way it appears is that we can set a preferred domain up in Webmaster Tools only at the root domain level. The subdomain can not have this and actually says the following "Restricted to root level domains only". So it appears that the domain should follow what the root domain says which on our preferred one says to display the www.example.com. and not the naked version. That is one issue I have in that one displays one way and the other displays another. Is it that we have the wrong redirects in place for the subdomain? Another question is does this have any affect on SEO in regards to duplicate content on the web in how we have set this up?

    Read the article

  • Little mysterious RowMatch

    - by kishore.kondepudi(at)oracle.com
    Incidentally this was the first piece of code i ever wrote in ADF.The requirement was we have tax rates which are read from a table.And there can be different type of tax rates called certificates or exceptions based on the rate_type column in the tax rates table.The simplest design i chose was to create an EO on the tax rates table and create two VO's called CertificateVO and ExceptionVO based on the same EO.So far so good.I wrote all the business logic in the EO and completed the model project.The CertificateVO has the query as select * from tax_rates TaxRateEO where rate_type='CERTIFICATE' and similary the ExceptionVO is also built.The UI is pretty simple and it has two tabs called Certificates and Exceptions and each table has a button to create a tax rate.The certificate tab is driven by CertificateVO and exception tab is driven by ExceptionVO.The CertificateVO has default value of rate_type set to 'CERTIFICATE' and ExceptionVO has default value of rate_type to 'EXCEPTION' to default values for new records.So far so good.But on running the UI i noticed a strange thing,When i create a new row in Certificate i see the same row in Exception too and vice-versa.i.e; what ever row i create in one VO it also appears in the second one although it shouldn't be.I couldn't understand the reason for behavior even though an explicit where clause is present.Digging through documentation i found that ADF doesnt apply the where clause to new rows instead it applies something called as RowMatch to them.RowMatch in simple terms is a where condition applied to the VO rows at runtime.Since we had both VO's based on the same EO we have the same entity cache.The filter factor for new rows to be shown in VO at runtime is actually RowMatch than the where clause defined in the VO.The default RowMatch is empty as a result any new row appears in both the VO's since its from same entity cache.The solution to this problem is to use polymorphic view objects which can do the row filter based on configuration or override the getRowMatch() method in the VOImpl and pass the custom where filter instead of default RowMatch.Eg:@Overridepublic RowMatch getRowMatch(){    return new RowMatch("rate_type='CERTIFICATE'");}similarly for ExceptionVO too.With proper RowMatch in place new rows will route themselves to appropriate VO.PS: The behavior(Same row pushed to both VO's from entity cache) is also called as ViewLink Consistency.Try it out!

    Read the article

  • Combining Code Review with Trust Metrics

    - by DragonFax
    I don't get the chance to partake of it at work. But I love the idea of code review. Especially of online open source code review like Gerrit Code Review. I love what Trust Metrics have done for forums and collective intelligences sites on the internet like stackexchange, reddit, and wikipedia. Would it be possible to combine the two and come up with an open source project management system. Something that ends up being mostly community driven. Perhaps a kind of wikipedia of code for a project. Where submitters become popular/trusted by having lots of patches reviewed favoriably by others, and accepted into the trunk. And popular/trusted submitters get their patchs accepted faster/easier. I'm looking for some opinions on the idea, or perhaps pointers to where its been done before, if thats the case. This might leave the lead maintiner little more to do than: wrangle the direction of the project by fast-tracking or vetoing specific patches. settling disputes when the CI tests break, or fixing it himself. Is design by community worse than design by committee?

    Read the article

  • double screen in ubuntu 12.04?

    - by johan
    I am using ubuntu 12.04 and my video card is ATI Radeon 5000. I cannot use double screen (extended version). I get this error The selected configuration for displays could not be applied requested position/size for CRTC 148 is outside the allowed limit: position=(1280, 0), size=(1280, 768), maximum=(1440, 1440) I tried all display settings but it does not work. Some outputs from the system settings: root@ubuntu:~# lshw -C display *-display description: VGA compatible controller product: Madison [Radeon HD 5000M Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:46 memory:e0000000-efffffff memory:f0020000-f003ffff ioport:d000(size=256) memory:f0000000-f001ffff root@ubuntu:~# aticonfig --initial Uninitialised file found, configuring. Using /etc/X11/xorg.conf Saving back-up to /etc/X11/xorg.conf.original-0 root@ubuntu:~# cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection I would appreciate any suggestions how to solve the problem. Thank you

    Read the article

  • Reboot failure after upgrade from 8.04 LTS to 10.04 LTS

    - by Alan Fietz
    I bought our computer from Freegeeks with Ubuntu 8.04 installed. I upgraded from Ubuntu 8.04 to 10.04 on Thursday November 10. I have an ASUS P4P800SE with dual Intel P4@3GHZ. Installation messages were: - Error loading Nautilus config info - Replaced customied /etc/login.defs - Replaced customized /etc/dhcp3/dhclient.conf - 189 packages removed - WARNING: Failed to read mirror file When I rebooted, the usual ASUS screen appeared, then "Loading GRUB" then "starting Up..." then "starting Up..." again then a blank screen (the moniter went dormant). I rebooted, started GRUB and selected: version 10.04.3 LTS kernel 2.6.32-35 generic I got the same results. I rebooted, started GRUB and selected: kernel 2.6.24-29 generic Here's what was displayed: udevd [875]: error getting socket: Invalid argument libudev:udev_monitor_new_from_netlink: error getting socket: Invalid argument Segmentation fault **Gave up waiting for root device** Common problems - Boot args (cat/proc/cmdline) - Check root delay - check root - Missing modules (cat/pro/modules; **Alert! /dev/disk/by_vvid/c59c6361 etc... does not exist. Dropping to a shell.** Then Busybox v1.13.3 started with the following prompt (?) (initramfs) _ But my typing did not appear on the screen. It appears the hard drive cannot be found. Any suggestion on how to remedy this? Thank you.

    Read the article

  • Oracle Endeca Information Discovery 3.1 is Now Available

    - by p.anda
    Oracle Endeca Information Discovery (OEID) 3.1 is a major release that incorporates significant new self-service discovery capabilities for business users. These include agile data mashup, extended support for unstructured analytics, and an even tighter integration with Oracle BI This release is available for download from: Oracle Delivery Cloud Oracle Technology Network Some of the what's new highlights ... Self-service data mashup... enables access to a wider variety of personal and trusted enterprise data sources. Blend multiple data sets in a single app. Agile discovery dashboards... allows users to easily create, configure, and securely share discovery dashboards with intelligent defaults, intuitive wizards and drag-and-drop configuration. Deeper unstructured analysis ... enables users to enrich text using term extraction and whitelist tagging while the data is live. Enhanced integration with OBI... provides easier wizards for data selection and enables OBI Server as a self-service data source. Enterprise-class data discovery... offers faster performance, a trusted data connection library, improved auditing and increased data connectivity for Hadoop, web content and Oracle Data Integrator. Find out more ... visit the OEID Overview page to download the What's New and related Data Sheet PDF documents. Have questions or want to share details for Oracle Endeca Information Discovery?  The MOS Communities is a great first stop to visit and you can stop-by at MOS OEID Community.

    Read the article

  • Nexus 7 Possibly Bricked

    - by user214186
    I have a 1st gen Nexus 7 (32GB). I used the steps at https://wiki.ubuntu.com/Nexus7/Installation to successfully install Ubuntu 13.04 desktop onto the tablet. It was working fine and then I decided to upgrade to Ubuntu Touch. I booted the tablet into fast boot mode but the commands 'adb devices' and 'sudo fastboot devices' would not see the device. I am performing these steps from an Ubuntu 12.04 desktop PC. Prior to installing 13.04 the device was seen fine. I made the mistake of performing the 'Device factory reset' step from https://wiki.ubuntu.com/Touch/Install - Step 2. Now when I try to boot the device I get the following: mount: mounting /dev on /root/dev failed: no such file or directory mount: mounting /dev on /root/sys failed: no such file or directory mount: mounting /proc on /root/proc failed: no such file or directory Targe filesystem doesn't have requested /sbin/init. No init found. Try passing init= bootarg. BusyBox v1.20.2 (Ubuntu 1:1.20.0-0ubuntu1) built-in shell (ash) Enter help for a list of built-in commands. (initramfs) I have searched the web but every reference to this problem is from people who still have ADB access to the device so they can recover by flashing the tablet again. I can attach a keyboard to the USB port and access the BusyBox console but I don't know what steps to do to recover from my error. Any suggestions would be helpful. Thanks

    Read the article

  • Setting up Beats audio on HP Pavilion m6

    - by Joel Auterson
    I have an HP Pavilion m6-1054sa laptop, with a Beats subwoofer on the bottom. The normal laptop speakers work fine under Ubuntu but the Beats speaker(s?) does not. Anyone know how to get this working? Here's my lspci output, if it helps... 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames XT/GL [Radeon HD 7600M Series] (rev ff) 07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01) 07:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 0a) 08:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)

    Read the article

  • Restoring GRUB2 on Software RAID 0 after Windows 7 wiped it using LiveCD

    - by unknownthreat
    I have installed Ubuntu 10.10 on my system. However, I need to install Windows 7 back, and I expect that it would alter GRUB and it did. Right now, my partition on my Software RAID 0 looks like this: nvidia_acajefec1 is Ubuntu 10.10 and nvidia_acajefec3 is Windows 7. I've been following some guides around and I am always stuck at GRUB not able to detect the usual RAID content. I've tried running: sudo grub > root (hd0,0) GRUB complains it couldn't find my hard disk. So I tried: find (hd0,0) And it complains that it couldn't find anything. So I tried: find /boot/grub/stage1 It said "file not found". Here's the text from the console: ubuntu@ubuntu:~$ grub Probing devices to guess BIOS drives. This may take a long time. [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename. ] grub> root (hd0,0) root (hd0,0) Error 21: Selected disk does not exist grub> find /boot/grub/stage1 find /boot/grub/stage1 Error 15: File not found Fortunately, I got one person suggesting that what I've been trying to do is for GRUB Legacy, not GRUB2. So I went to the suggested website, ** (http://grub.enbug.org/Grub2LiveCdInstallGuide) **try to look around, and try: ubuntu@ubuntu:~$ sudo fdisk -l Unable to seek on /dev/sda This is just the step 2 of the instruction in the http://grub.enbug.org/Grub2LiveCdInstallGuide and I cannot proceed because it cannot seek /dev/sda. However, ubuntu@ubuntu:~$ sudo dmraid -r /dev/sdb: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 /dev/sda: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 So what now? Do you have an idea for how to make fdisk see my RAID array on live cd (Ubuntu 10.10)? Honestly, I am lost, very lost in trying to restore GRUB2 on this software RAID 0 system right now.

    Read the article

  • Direct IO enhancements in OVM Server for SPARC 2.2(a.k.a LDoms2.2)

    - by user12611315
    The Direct I/O feature has been available for LDoms customers since LDoms2.0. Apart from the latest SR-IOV feature in LDoms2.2, it is worth noting a few enhancements to the Direct I/O feature. These are: Support for Metis-Q and Metis-E cards. These cards are highly requested for support and are worth mentioning because they are the only combo cards containing both FibreChannel and Ethernet in the same card. With this support, a customer can have both SAN storage and network access with just one card and one PCIe slot assigned to a logical domain. This reduces cost and helps when there are less number of slots in a given platform. The following are the part numbers for these cards. I have tried to put the platforms on which each card is supported, but this information can get quickly outdated. The accurate information can be found at the Support Document.  Card Name  Part Number  Platforms Metis-Q: StorageTek Dual 8Gb Fibre Channel Dual GbE ExpressModule HBA, QLogic SG-XPCIEFCGBE-Q8-N  SPARC T3-4, T4-4 Metis-E: StorageTek Dual 8Gb Fibre Chanel Dual GbE ExpressModule HBA, Emulex SG-XPCIEFCGBE-E8-N SPARC T3-4, T4-4  Additional cards added to the portfolio of supported cards. This is mainly Powerville based Ethernet cards, the part numbers for these cards as below:  Part Number  Description  7100477 Sun Quad Port GbE PCI Express 2.0 Low Profile Adapter, UTP  7100481 Sun Dual Port GbE PCI Express 2.0 Low Profile Adapter, MMF  7100483 Sun Quad Port GbE PCI Express 2.0 ExpressModule, UTP  7110486 Sun Quad Port GbE PCI Express 2.0 ExpressModule, MMF    Note:  Direct IO feature has a hard dependency on the Root domain(PCIe bus owner, here Primary domain). That is, rebooting the Root domain for any reason may impact the logical domains having PCIe slots assigned with Direct IO feature. So rebooting a root domain need to be carefully managed. Also apply the failure-policy settings as described in the admin guide and release notes to deal with unexpected cases.

    Read the article

  • Workaround for an Xcode/iOS SDK Issue...

    - by Joe Huang
    Hi, everyone: When you are doing ADF Mobile development, and you need to deploy the application to an iOS device, you would need to compile/deploy the app with iOS App Certificates and Provisioning Profile. This means you would need to "Deploy to Package" or "Deploy to iTunes" during deployment, and configure JDeveloper with the proper certificates/profiles. In some instances (exact combination is still not clear), deploy and signing the application to generate the ipa file may fail with similar error message at the end of the deployment log: [01:04:45 PM] Deployment failed due to one or more errors returned by '/usr/bin/xcrun'. The following is a summary of the returned error(s): Command-line execution failed (Return code: 1) error: /usr/bin/codesign --force --preserve-metadata=identifier,entitlements,resource-rules --sign iPhone Distribution: Oracle Corporation --resource-rules=/var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/Payload/HelloWorld.app/ResourceRules.plist --entitlements /var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/entitlements_plistEINPBkIG /var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/Payload/HelloWorld.app failed with error 1. Output: /var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/Payload/HelloWorld.app: replacing existing signature Program /usr/bin/codesign returned 1 : [/var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/Payload/HelloWorld.app: replacing existing signature This issue is a known issue and is not related to ADF Mobile. The workaround is discussed in this article from StackOverflow. This article refers to the old location of Xcode, so you would need to adjust the paths accordingly. The path for Xcode 4.3 and above would be like: /Applications/Xcode.app/Contents//Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/PackageApplication to this script file. To modify it, you probably can’t use Text Editor. I end up opening a terminal session, changed the file permission, and used vi to update it. Thanks, Oracle ADF Mobile Product Management Team

    Read the article

  • Cannot restart Ubuntu after replacing Unity with Gnome and purging lightdm

    - by OtagoHarbour
    I am running Ubuntu 11.10. I used the directions here to replace Unity with Gnome. It seemed to work fine until the end of step 2 when I rebooted the computer. When I chose the default option, I just got a black screen. When I choose the restore option and then "Restore normal boot" I get Starting load fallback graphics devices [fail] Starting GNOME Display Manager [ok] Starting Userspace bootsplash [ok] Stopping GNOME Display Manager [ok] Stopping Userspace bootsplash [ok] Starting web server apach22 [fail] (among a lot of OKs) It finally gets to Stopping System V runlevel compatibility [ok] where it hangs. I left it overnight and just had a blank screen when I checked it in the morning. I can "Drop to root shell prompt" and "Drop to root shell prompt with networking". I did see here that one should be able to fix the problem by choosing remount and then doing apt-get install lightdm I tried this as root shell with and without networking and got the message Err http://us.archive.ubuntu.com/ubuntu/ oneric-updates/main lightdm i386 1.0.6-0ubuntu1.7 Could not resolve 'us.archive.ubuntu.com/ubuntu' What is the best way to resolve this problem? Thanks, Peter.

    Read the article

  • disk space worngly displayed after installing LVM disk

    - by Ubuntuser
    I installed ubuntu server using LVM partitioning on a 1 TB hard disk. However, after installation, i can only see 10 Gig space here is the fidsk output ` # fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00041507 Device Boot Start End Blocks Id System /dev/sda1 * 1 10 71680 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 10 121602 976689152 8e Linux LVM Disk /dev/dm-0: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-0 doesn't contain a valid partition table Disk /dev/dm-1: 2147 MB, 2147483648 bytes 255 heads, 63 sectors/track, 261 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-1 doesn't contain a valid partition table You have new mail in /var/mail/root and df -h output df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/system-root 9.9G 6.6G 2.8G 71% / devtmpfs 1.9G 232K 1.9G 1% /dev tmpfs 1.9G 4.0K 1.9G 1% /dev/shm /dev/sda1 68M 22M 43M 34% /boot tmpfs 6.0G 0 6.0G 0% /var/spool/asterisk/monitor You have new mail in /var/mail/root ` any way to increase this space without reisntalling?

    Read the article

  • My laptop with Linux/ Ubuntu isn't working

    - by Andy Campos
    I have a dell laptop with ubuntu linux. A day I tried to start it up and a black screen just appeared that says: GNU GRUB version1.98+20100804-5ubuntu3 (and these clickable options:) -Ubuntu, with Linux 2.6.35-22-generic -Ubuntu, with Linux 2.6.35-22-generic (recovery mode) -Memory test (memtest86+) -Memory test (memtest86+, serial console 115200) When I click the first one, a bunch of text appears like: mount: mounting /dev/disk/by-uuid/8396a225... failed: invalid argument mount: mounting /dev on /root/dev failed: no such file or directory mount: mounting /sys on /root/sys failed: no such file or directory mount: mounting /proc on /root/proc failed: no such file or directory Target file system doesn't have requested /sbin/init No init found. Try passing init= bootarg Enter 'help' for a list of built-in commands BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) (initramfs) When I enter 'help' a bunch more incomprehensible text appears. Whenever I press the enter key all that pops up is (intetramfs) If anyone can make rhyme or reason out of this please, please help me out so it can boot up normally and i can be set. If there's some kind of special code I have to type in or something I know nothing about computers.

    Read the article

  • Raid Shows Up as Multiple Drives - Can't Mount

    - by manyxcxi
    I have a single hard drive that the OS is installed on and I have Sil raid card installed with two matching 500GB hdds set up in Raid 0 and formatted- they're completely empty. For whatever reason they are showing up as /dev/sdb and /dev/sdc and not as a single hard drive. I used fdisk to format both raid drives as Linux raid auto (fd) but I cannot mount either device and dmraid doesn't seem to want to work, what step am I missing? When I installed 9.04 oh so long ago it seems like it recognized and automatically did everything that needed to be done, now I'm stuck. dmraid Output root@tripoli:~# dmraid -r /dev/sdc: sil, "sil_biaebhadcfcb", stripe, ok, 976771072 sectors, data@ 0 /dev/sdb: sil, "sil_biaebhadcfcb", stripe, ok, 976771072 sectors, data@ 0 root@tripoli:~# dmraid -ay RAID set "sil_biaebhadcfcb" already active fdisk Output root@tripoli:~# fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000b9b01 Device Boot Start End Blocks Id System /dev/sda1 * 1 32 248832 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 32 60802 488134657 5 Extended /dev/sda5 32 60802 488134656 8e Linux LVM Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6ead5c9a Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 fd Linux raid autodetect Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe6e2af28 Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 fd Linux raid autodetect

    Read the article

  • TBXML parsing issue while the value cannot get in UILabel

    - by Dany
    In my app I'm using TBXML parser where I need to get a value from xml file and print it on the label. This is my xml file in server <gold> <price> <title>22 K Gold</title> </price> <price> <title>24 K Gold</title> </price> </gold> any my Viewcontroller.h looks like #import <UIKit/UIKit.h> #import "TBXML.h" @interface ViewController : UIViewController{ IBOutlet UILabel *lab; IBOutlet UILabel *lab1; TBXML *tbxml; } @end and my Viewcontrooler.m looks like - (void)viewDidLoad { [super viewDidLoad]; // Do any additional setup after loading the view, typically from a nib. NSData *xmlData = [[NSData alloc]initWithContentsOfURL:[NSURL URLWithString:@"http://www.abcde.com/sample.xml"]]; tbxml = [[TBXML alloc]initWithXMLData:xmlData]; TBXMLElement * root = tbxml.rootXMLElement; if (root) { TBXMLElement * elem_PLANT = [TBXML childElementNamed:@"price" parentElement:root]; while (elem_PLANT !=nil) { TBXMLElement * elem_BOTANICAL = [TBXML childElementNamed:@"title" parentElement:elem_PLANT]; NSString *botanicalName = [TBXML textForElement:elem_BOTANICAL]; lab.text=[NSString stringWithFormat:@"re %@", botanicalName]; elem_PLANT = [TBXML nextSiblingNamed:@"price" searchFromElement:elem_PLANT]; elem_BOTANICAL = [TBXML childElementNamed:@"title" parentElement:elem_PLANT]; botanicalName = [TBXML textForElement:elem_BOTANICAL]; lab1.text=[NSString stringWithFormat:@"re %@", botanicalName]; } } } I'm getting BAD_ACCESS thread. Am I missing anything?

    Read the article

  • What is the right way to Windows 7/Ubuntu 10.10 Dual-Triple Boot Partitioning for Laptop OEM?

    - by Denja
    Hi Linux Community, I find my self struggling with the ever slow and buggy windoze OS once again. It's Time to change with the Ubuntu 10.10 64bit as a really faster Operating System. My Hard Disk laptop as a RECOVERY and HP_TOOLS partition they are both Primary. I Have the System Recovery DVD for Windows 64bit should anything happen. Here's the layout I used with windows before: * (C:) Windows 7 system partition NTFS - 284,89GB (Primary,Boot,Pagefile,Dump) * HP_TOOLS system partition FAT32 - 99MB (Primary) * (D:) RECOVERY partition NTFS - 12,90GB (Primary) * SYSTEM partition NTFS 199MB (Primary) Here's the layout I want to make based on your answers * (C:) Windows 7 system partition NTFS - 60GB (Primary) (sda1) * (D:) Windows DATA partition (user files) NTFS - 120GB(Primary)(sda2);wanna share with Linux * Linux root Ext4 - 100GB (Primary)(sda3) (Ubuntu 10.10 64bit) * Linux swap swap- RAM size, 3GB (sda4) * Linux root Ext3- 15,9GB (Extended)(sda5) (OpenSuse or Puppy) Here is my New Ubuntu 10.10 64bit layout in use now: * SYSTEM partition NTFS 199MB (Primary) (sda1) **Partition 1 does not end on cylinder boundary.(?)** * (C:) Windows 7 system partition NTFS - 90GB (Primary) (sda2) * (D:) Windows 7 RECOVERY partition NTFS - 12,90GB (Primary) (sda3) * Linux system partition EXTENDED - 195GB (Logical) * Linux root Ext4- 10GB (Extended) (sda5) * Linux home Ext3- 185GB (Extended) (sda6) I didn't know if I could wipe all previous partitions when i installed Ubuntu because of the RECOVERY partition so I just made the space for my extended partition by deleting the HP_TOOLS (Fat32). By doing this I managed to make and successfully install Ubuntu 64 but I couldn't actually make the partition for the swap or a third Linux OS. Question 1: What is the right way to Windows 7/Ubuntu 10.10 Dual-Triple Boot Partitioning for Laptop OEM?? Thank you in advance for your advises and suggestions and Happy New Year to All!!

    Read the article

  • Wifi - wireless network not working after installing Ubuntu 12.04

    - by Nilesh
    I had installed ubuntu 12.04 in my Dell Vostro 3460. Initially wired as well wireless both are not working. After installing compat-wireless-2012-07-03-pc.tar.bz2 wired network fine but wireless is not working. Previously both were working fine with ubuntu 11.10. Also presently both network are working fine in Win7. lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.4 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 5 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) 02:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 03:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 10) iwconfig: lo no wireless extensions. eth0 no wireless extensions. ifconfig: eth0 Link encap:Ethernet HWaddr 84:8f:69:d4:35:9b inet addr:10.24.22.72 Bcast:10.24.31.255 Mask:255.255.224.0 inet6 addr: fe80::868f:69ff:fed4:359b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15332 errors:0 dropped:0 overruns:0 frame:0 TX packets:10425 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:9262594 (9.2 MB) TX bytes:1572030 (1.5 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1432 errors:0 dropped:0 overruns:0 frame:0 TX packets:1432 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:145656 (145.6 KB) TX bytes:145656 (145.6 KB)

    Read the article

  • Restoring GRUB2 on Software RAID 0 using LiveCD after Windows 7 wiped it

    - by unknownthreat
    I have installed Ubuntu 10.10 on my system. However, I need to install Windows 7 back, and I expect that it would alter GRUB and it did. Right now, my partition on my Software RAID 0 looks like this: nvidia_acajefec1 is Ubuntu 10.10 and nvidia_acajefec3 is Windows 7. I've been following some guides around and I am always stuck at GRUB not able to detect the usual RAID content. I've tried running: sudo grub > root (hd0,0) GRUB complains it couldn't find my hard disk. So I tried: find (hd0,0) And it complains that it couldn't find anything. So I tried: find /boot/grub/stage1 It said "file not found". Here's the text from the console: ubuntu@ubuntu:~$ grub Probing devices to guess BIOS drives. This may take a long time. [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename. ] grub> root (hd0,0) root (hd0,0) Error 21: Selected disk does not exist grub> find /boot/grub/stage1 find /boot/grub/stage1 Error 15: File not found Fortunately, I got one person suggesting that what I've been trying to do is for GRUB Legacy, not GRUB2. So I went to the suggested website, ** (http://grub.enbug.org/Grub2LiveCdInstallGuide) **try to look around, and try: ubuntu@ubuntu:~$ sudo fdisk -l Unable to seek on /dev/sda This is just the step 2 of the instruction in the http://grub.enbug.org/Grub2LiveCdInstallGuide and I cannot proceed because it cannot seek /dev/sda. However, ubuntu@ubuntu:~$ sudo dmraid -r /dev/sdb: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 /dev/sda: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 So what now? Do you have an idea for how to make fdisk see my RAID array on live cd (Ubuntu 10.10)? Honestly, I am lost, very lost in trying to restore GRUB2 on this software RAID 0 system right now.

    Read the article

  • Price Drop for Processor based License on Exalytics

    - by Mike.Hallett(at)Oracle-BI&EPM
    ·       33% reduction in the list `per processor` license pricing for the Oracle BI Foundation Suite ·       New capacity-based licensing which allows customers to think big & start small, significantly lowering the entry price point for an Exalytics. Oracle BI Software List Price changes In response to new powerful platforms like the in-memory Oracle Exalytics with 40 cpu cores (counted under Oracle pricing policy as 20 “processors”), the list price of “Oracle BI Foundation Suite” (BIFS) is reduced by 33% from $450K per processor to $300K per processor. Capacity-based licensing on Exalytics (Trusted Partitions) “Capacity-based pricing” for the BIFS, Endeca, Essbase and Times Ten for Exalytics software is now available for Exalytics systems. This is delivered using “Oracle VM” (OVM).  We still ship a full Exalytics machine to all customers, but they may choose to only use and license a subset of the processors installed in the machine.   Customers can license Exalytics software in units of 5 “processors”: 5, 10, 15 or the full capacity 20.   As the customer’s implementation and workload increases, it is a simple matter to license additional processors and, using OVM, make them available to the BI or EPM application. Endeca Information Discovery now available on Exalytics Oracle has also announced the certification of “Oracle Endeca Information Discovery” (EID) on the Exalytics machine.    EID can be licensed alone or in combination with the BIFS & Times Ten for an Exalytics stack, and also participates in the capacity based pricing outlined above.   The Exalytics hardware is the perfect platform for EID, and provides superb power and performance for this in-memory hybrid text-search-analytics.   For more information : Oracle Price lists Oracle Partitioning Policy Discussion by Mark Rittman (Rittman Mead Consulting ltd.) on Oracle Trusted Partitions for Oracle Engineered Systems, Oracle Exalytics and Updated BI Foundation Pricing.

    Read the article

< Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >