Search Results

Search found 6355 results on 255 pages for 'unix socket'.

Page 125/255 | < Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >

  • Using a Raspberry Pi as a VPN?

    - by sudo rm -rf
    So I'm sure many of you have heard of the new Raspberry Pi project. I was looking at messing around with Model B, which has the following relevant specs: Broadcom BCM2835 700MHz ARM1176JZFS processor with FPU and Videocore 4 GPU 256MB RAM Boots from SD card, running the Fedora version of Linux (ARM Version) 10/100 BaseT Ethernet socket USB 2.0 socket So I was curious if it would be possible to create a simple VPN out of this little machine. I do realize that since it's an ARM processor that might mess up quite a few things. Any ideas if this is possible? Just for what it's worth, this would be a personal project so I'm not worried about performance.

    Read the article

  • Very low throughput on 10GbE network

    - by aix
    I have two Linux machines, each equipped with a Solarflare SFN5122F 10GbE NIC. The two NICs are connected together with an SFP+ Direct Attach cable. I am using netperf to measure TCP throughput between the two machines. On one box, I run: netserver and on the other: netperf -t TCP_STREAM -H 192.168.x.x -- -m 32768 I get: MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.x.x (192.168.x.x) port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 32768 10.02 1321.34 The measured throughput is 1.3Gb/s. This is 7.5x below the theoretical maximum, and only 30% faster than 1GbE. What steps can I take to troubleshoot this?

    Read the article

  • Postfix tutorial inconsistency

    - by Desmond Hume
    I'm following this tutorial to setup a Postfix/Dovecot mail server with Postfix Admin as a web front end. As regards directory structure for virtual mail users, the author of the tutorial writes: Virtual mail users are those that do not exist as Unix system users. They thus don't use the standard Unix methods of authentication or mail delivery and don't have home directories. That is how we are managing things here: mail users are defined in the database created by Postfix Admin rather than existing as system users. Mail will be kept in subfolders per domain and account under /var/vmail - e.g. [email protected] will have a mail directory of /var/vmail/example.com/me. But when he gives instructions about configuring Postfix Admin, he suggests this to be contained by Postfix Admin's config.inc.php: // Mailboxes // If you want to store the mailboxes per domain set this to 'YES'. // Examples: // YES: /usr/local/virtual/domain.tld/[email protected] // NO: /usr/local/virtual/[email protected] $CONF['domain_path'] = 'NO'; Is there an inconsistency?

    Read the article

  • FreeBSD 8.1 unstable network connection

    - by frankcheong
    I have three FreeBSD 8.1 running on three different hardware and therefore consist of different network adapter as well (bce, bge and igb). I found that the network connection is kind of unstable which I have tried to scp some 10MB file and found that I cannot always get the files completed successfully. I have further checked with my network admin and he claim that the problem is being caused by the network driver which cannot support the load whereby he tried to ping using huge packet size (around 15k) and my server will drop packet consistently at a regular interval. I found that this statement may not be valid since the three server is using three different network drive and it would be quite impossible that the same problem is being caused by three different network adapter and thus different network driver. Since then I have tried to tune up the performance by playing around with the /etc/sysctl.conf figures with no luck. kern.ipc.somaxconn=1024 kern.ipc.shmall=3276800 kern.ipc.shmmax=1638400000 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # Required by pf net.inet.ip.forwarding=1 #Network Performance Tuning kern.ipc.maxsockbuf=16777216 net.inet.tcp.rfc1323=1 net.inet.tcp.sendbuf_max=16777216 net.inet.tcp.recvbuf_max=16777216 # Setting specifically for 1 or even 10Gbps network net.local.stream.sendspace=262144 net.local.stream.recvspace=262144 net.inet.tcp.local_slowstart_flightsize=10 net.inet.tcp.nolocaltimewait=1 net.inet.tcp.mssdflt=1460 net.inet.tcp.sendbuf_auto=1 net.inet.tcp.sendbuf_inc=16384 net.inet.tcp.recvbuf_auto=1 net.inet.tcp.recvbuf_inc=524288 net.inet.tcp.sendspace=262144 net.inet.tcp.recvspace=262144 net.inet.udp.recvspace=262144 kern.ipc.maxsockbuf=16777216 kern.ipc.nmbclusters=32768 net.inet.tcp.delayed_ack=1 net.inet.tcp.delacktime=100 net.inet.tcp.slowstart_flightsize=179 net.inet.tcp.inflight.enable=1 net.inet.tcp.inflight.min=6144 # Reduce the cache size of slow start connection net.inet.tcp.hostcache.expire=1 Our network admin also claim that they see quite a lot of network up and down from their cisco switch log while I cannot find any up down message inside the dmesg. Have further checked the netstat -s but dont have concrete idea. tcp: 133695291 packets sent 39408539 data packets (3358837321 bytes) 61868 data packets (89472844 bytes) retransmitted 24 data packets unnecessarily retransmitted 0 resends initiated by MTU discovery 50756141 ack-only packets (2148 delayed) 0 URG only packets 0 window probe packets 4372385 window update packets 39781869 control packets 134898031 packets received 72339403 acks (for 3357601899 bytes) 190712 duplicate acks 0 acks for unsent data 59339201 packets (3647021974 bytes) received in-sequence 114 completely duplicate packets (135202 bytes) 27 old duplicate packets 0 packets with some dup. data (0 bytes duped) 42090 out-of-order packets (60817889 bytes) 0 packets (0 bytes) of data after window 0 window probes 3953896 window update packets 64181 packets received after close 0 discarded for bad checksums 0 discarded for bad header offset fields 0 discarded because packet too short 45192 discarded due to memory problems 19945391 connection requests 1323420 connection accepts 0 bad connection attempts 0 listen queue overflows 0 ignored RSTs in the windows 21133581 connections established (including accepts) 21268724 connections closed (including 32737 drops) 207874 connections updated cached RTT on close 207874 connections updated cached RTT variance on close 132439 connections updated cached ssthresh on close 42392 embryonic connections dropped 72339338 segments updated rtt (of 69477829 attempts) 390871 retransmit timeouts 0 connections dropped by rexmit timeout 0 persist timeouts 0 connections dropped by persist timeout 0 Connections (fin_wait_2) dropped because of timeout 13990 keepalive timeouts 2 keepalive probes sent 13988 connections dropped by keepalive 173044 correct ACK header predictions 36947371 correct data packet header predictions 1323420 syncache entries added 0 retransmitted 0 dupsyn 0 dropped 1323420 completed 0 bucket overflow 0 cache overflow 0 reset 0 stale 0 aborted 0 badack 0 unreach 0 zone failures 1323420 cookies sent 0 cookies received 1864 SACK recovery episodes 18005 segment rexmits in SACK recovery episodes 26066896 byte rexmits in SACK recovery episodes 147327 SACK options (SACK blocks) received 87473 SACK options (SACK blocks) sent 0 SACK scoreboard overflow 0 packets with ECN CE bit set 0 packets with ECN ECT(0) bit set 0 packets with ECN ECT(1) bit set 0 successful ECN handshakes 0 times ECN reduced the congestion window udp: 5141258 datagrams received 0 with incomplete header 0 with bad data length field 0 with bad checksum 1 with no checksum 0 dropped due to no socket 129616 broadcast/multicast datagrams undelivered 0 dropped due to full socket buffers 0 not for hashed pcb 5011642 delivered 5016050 datagrams output 0 times multicast source filter matched sctp: 0 input packets 0 datagrams 0 packets that had data 0 input SACK chunks 0 input DATA chunks 0 duplicate DATA chunks 0 input HB chunks 0 HB-ACK chunks 0 input ECNE chunks 0 input AUTH chunks 0 chunks missing AUTH 0 invalid HMAC ids received 0 invalid secret ids received 0 auth failed 0 fast path receives all one chunk 0 fast path multi-part data 0 output packets 0 output SACKs 0 output DATA chunks 0 retransmitted DATA chunks 0 fast retransmitted DATA chunks 0 FR's that happened more than once to same chunk 0 intput HB chunks 0 output ECNE chunks 0 output AUTH chunks 0 ip_output error counter Packet drop statistics: 0 from middle box 0 from end host 0 with data 0 non-data, non-endhost 0 non-endhost, bandwidth rep only 0 not enough for chunk header 0 not enough data to confirm 0 where process_chunk_drop said break 0 failed to find TSN 0 attempt reverse TSN lookup 0 e-host confirms zero-rwnd 0 midbox confirms no space 0 data did not match TSN 0 TSN's marked for Fast Retran Timeouts: 0 iterator timers fired 0 T3 data time outs 0 window probe (T3) timers fired 0 INIT timers fired 0 sack timers fired 0 shutdown timers fired 0 heartbeat timers fired 0 a cookie timeout fired 0 an endpoint changed its cookiesecret 0 PMTU timers fired 0 shutdown ack timers fired 0 shutdown guard timers fired 0 stream reset timers fired 0 early FR timers fired 0 an asconf timer fired 0 auto close timer fired 0 asoc free timers expired 0 inp free timers expired 0 packet shorter than header 0 checksum error 0 no endpoint for port 0 bad v-tag 0 bad SID 0 no memory 0 number of multiple FR in a RTT window 0 RFC813 allowed sending 0 RFC813 does not allow sending 0 times max burst prohibited sending 0 look ahead tells us no memory in interface 0 numbers of window probes sent 0 times an output error to clamp down on next user send 0 times sctp_senderrors were caused from a user 0 number of in data drops due to chunk limit reached 0 number of in data drops due to rwnd limit reached 0 times a ECN reduced the cwnd 0 used express lookup via vtag 0 collision in express lookup 0 times the sender ran dry of user data on primary 0 same for above 0 sacks the slow way 0 window update only sacks sent 0 sends with sinfo_flags !=0 0 unordered sends 0 sends with EOF flag set 0 sends with ABORT flag set 0 times protocol drain called 0 times we did a protocol drain 0 times recv was called with peek 0 cached chunks used 0 cached stream oq's used 0 unread messages abandonded by close 0 send burst avoidance, already max burst inflight to net 0 send cwnd full avoidance, already max burst inflight to net 0 number of map array over-runs via fwd-tsn's ip: 137814085 total packets received 0 bad header checksums 0 with size smaller than minimum 0 with data size < data length 0 with ip length > max ip packet size 0 with header length < data size 0 with data length < header length 0 with bad options 0 with incorrect version number 1200 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 300 packets reassembled ok 137813009 packets for this host 530 packets for unknown/unsupported protocol 0 packets forwarded (0 packets fast forwarded) 61 packets not forwardable 0 packets received for unknown multicast group 0 redirects sent 137234598 packets sent from this host 0 packets sent with fabricated ip header 685307 output packets dropped due to no bufs, etc. 52 output packets discarded due to no route 300 output datagrams fragmented 1200 fragments created 0 datagrams that can't be fragmented 0 tunneling packets that can't find gif 0 datagrams with bad address in header icmp: 0 calls to icmp_error 0 errors not generated in response to an icmp message Output histogram: echo reply: 305 0 messages with bad code fields 0 messages less than the minimum length 0 messages with bad checksum 0 messages with bad length 0 multicast echo requests ignored 0 multicast timestamp requests ignored Input histogram: destination unreachable: 530 echo: 305 305 message responses generated 0 invalid return addresses 0 no return routes ICMP address mask responses are disabled igmp: 0 messages received 0 messages received with too few bytes 0 messages received with wrong TTL 0 messages received with bad checksum 0 V1/V2 membership queries received 0 V3 membership queries received 0 membership queries received with invalid field(s) 0 general queries received 0 group queries received 0 group-source queries received 0 group-source queries dropped 0 membership reports received 0 membership reports received with invalid field(s) 0 membership reports received for groups to which we belong 0 V3 reports received without Router Alert 0 membership reports sent arp: 376748 ARP requests sent 3207 ARP replies sent 245245 ARP requests received 80845 ARP replies received 326090 ARP packets received 267712 total packets dropped due to no ARP entry 108876 ARP entrys timed out 0 Duplicate IPs seen ip6: 2226633 total packets received 0 with size smaller than minimum 0 with data size < data length 0 with bad options 0 with incorrect version number 0 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 0 fragments that exceeded limit 0 packets reassembled ok 2226633 packets for this host 0 packets forwarded 0 packets not forwardable 0 redirects sent 2226633 packets sent from this host 0 packets sent with fabricated ip header 0 output packets dropped due to no bufs, etc. 8 output packets discarded due to no route 0 output datagrams fragmented 0 fragments created 0 datagrams that can't be fragmented 0 packets that violated scope rules 0 multicast packets which we don't join Input histogram: UDP: 2226633 Mbuf statistics: 962679 one mbuf 1263954 one ext mbuf 0 two or more ext mbuf 0 packets whose headers are not continuous 0 tunneling packets that can't find gif 0 packets discarded because of too many headers 0 failures of source address selection Source addresses selection rule applied: icmp6: 0 calls to icmp6_error 0 errors not generated in response to an icmp6 message 0 errors not generated because of rate limitation 0 messages with bad code fields 0 messages < minimum length 0 bad checksums 0 messages with bad length Histogram of error messages to be generated: 0 no route 0 administratively prohibited 0 beyond scope 0 address unreachable 0 port unreachable 0 packet too big 0 time exceed transit 0 time exceed reassembly 0 erroneous header field 0 unrecognized next header 0 unrecognized option 0 redirect 0 unknown 0 message responses generated 0 messages with too many ND options 0 messages with bad ND options 0 bad neighbor solicitation messages 0 bad neighbor advertisement messages 0 bad router solicitation messages 0 bad router advertisement messages 0 bad redirect messages 0 path MTU changes rip6: 0 messages received 0 checksum calculations on inbound 0 messages with bad checksum 0 messages dropped due to no socket 0 multicast messages dropped due to no socket 0 messages dropped due to full socket buffers 0 delivered 0 datagrams output netstat -m 516/5124/5640 mbufs in use (current/cache/total) 512/1634/2146/32768 mbuf clusters in use (current/cache/total/max) 512/1536 mbuf+clusters out of packet secondary zone in use (current/cache) 0/1303/1303/12800 4k (page size) jumbo clusters in use (current/cache/total/max) 0/0/0/6400 9k jumbo clusters in use (current/cache/total/max) 0/0/0/3200 16k jumbo clusters in use (current/cache/total/max) 1153K/9761K/10914K bytes allocated to network (current/cache/total) 0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters) 0/0/0 requests for jumbo clusters denied (4k/9k/16k) 0/8/6656 sfbufs in use (current/peak/max) 0 requests for sfbufs denied 0 requests for sfbufs delayed 0 requests for I/O initiated by sendfile 0 calls to protocol drain routines Anyone got an idea what might be the possible cause?

    Read the article

  • Are these components compatible and are there any significant bottlenecks?

    - by Tom Gullen
    I'm trying to buy a new pc, for software dev and a bit of gaming. I already have a 500gb HDD , and a PCI sound card I want to use as well. Is all this stuff compatible, and will it all work together and are there any significant bottlenecks? Case, Mobo and PSU "Primo Motion" AMD 880G DDR3 Ready Barebones (Socket AM3) http://www.overclockers.co.uk/showproduct.php?prodid=FS-268-OK&groupid=43&catid=1817&subcat= SSD 64GB Crucial RealSSD C300 64GB 2.5" SATA 6Gb/s Solid State Hard Drive http://www.overclockers.co.uk/showproduct.php?prodid=HD-007-CR&groupid=1657&catid=1660&subcat=1668 CPU AMD Phenom II X6 Six Core 1090T Black Edition 3.20GHz (Socket AM3) http://www.overclockers.co.uk/showproduct.php?prodid=CP-266-AM&groupid=701&catid=6&subcat=1944 RAM 8GB Corsair Vengeance 8GB (2x4GB) DDR3 PC3-15000C9 1866MHz Dual Channel Kit http://www.overclockers.co.uk/showproduct.php?prodid=MY-292-CS&groupid=701&catid=8&subcat=1387 Graphics XFX ATI Radeon HD 5770 1024MB GDDR5 PCI-Express Graphics Card http://www.overclockers.co.uk/showproduct.php?prodid=GX-149-XF

    Read the article

  • Openfire: Closing session due to incorrect hostname

    - by cvista
    I have a fresh install on a windows sevrer 2008 box. I can connect adium to the server from a remote machine and from the admin console/sessions I can see my session. My friend can aslo connect and I can see his session. I can send an admin message out and both of us can see it in the adium clients. We can't see each other though. I also get these logs in the warn window in the log viewer: Closing session due to incorrect hostname in stream header. Host: prjatk.com. Connection: org.jivesoftware.openfire.net.SocketConnection@1b1fd9c socket: Socket[addr=/109.109.248.82,port=56258,localport=5269] session: null prjatk.com is the server - however in the server settings on the admin screen I see the computer name as the hostname - is that the issue? If so how can I change that?

    Read the article

  • xauth error with ssh X Forwarding

    - by bdk
    From my (Debain) Desktop machine, I am trying to ssh into a Debian Server with ssh -X remote-ip After logging into the remote host, I get: /usr/bin/X11/xauth: creating new authority file /root/.Xauthority /usr/bin/X11/xauth: (stdin):1: bad display name "unix:10.0" in "remove" command /usr/bin/X11/xauth: (stdin):2: bad display name "unix:10.0" in "add" command And the X Forwarding doesn't work. From my Desktop I can ssh -X into other Debian servers and it works fine. I found a lot of threads discussing similar issues on google, but they all seem to fade out without a solution, and the simple things suggested there like exporting DISPLAY or setting xhost + don't seem to make a difference.

    Read the article

  • Linux Bridge, Samba netbios name/hostname access

    - by Christopher Wilson
    I am currently running a linux bridge in the following configuration ADSL Modem: 192.168.1.1 Linux Bridge: eth0: 192.168.1.2 eth1: no address Wireless Router: 192.168.0.1 My issue is that i cannot access the "Linux Bridge" shares using the WINS name of the server via client systems (yes i understand it is a transparent bridge but i can access it via the 192.168.1.2 address this is not on the same subnet as the client systems). This is the global section of my SMB.CONF [global] unix extensions = off os level = 20 netbios name = server guest account = nobody server string = 447 Server security = share #unix extensions = no #wins support = yes #wins server = 192.168.0.1 name resolve order = wins lmhosts hosts bcast interfaces bridge1 eth0 eth1 lo bind interfaces only = yes Can i access a bridged server using it's WINS name to access samba shares? Cheers Chris

    Read the article

  • How to know the source of certain TCP traffic on AIX

    - by A.Rashad
    We have two AIX boxes, one for production system and another for testing. both systems are running ATM machine switches, where the ATM device is connected via TCP socket. we had an issue on production system where the machine would power off or get disconnected but the netstat -na | grep <IP of machine > would still mention that the socket is up when simulated that case on the UAT environment, the problem did not happen, where the socket would terminate in 3 to 5 minutes. when sniffed on the traffic between the machine and ATM we found that no traffic takes place on production while there is some sort of heartbeat on UAT. but it is not initiated by the application. $>tcpdump | grep -v "10.2.2.71" | grep -v "HSRP" | grep "10.3.1.30" tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on en6, link-type 1, capture size 96 bytes 09:08:13.323421 IP server073.afs3-callback > 10.3.1.30.impera: . 278204201:278204202(1) ack 3307884029 win 164 09:08:13.335334 IP 10.3.1.30.impera > server073.afs3-callback: . ack 1 win 64180 09:08:23.425771 IP 10.3.1.30.impera > server073.afs3-callback: . 1:2(1) ack 1 win 64180 09:08:23.425789 IP server073.afs3-callback > 10.3.1.30.impera: . ack 2 win 65535 09:09:13.628985 IP server073.afs3-callback > 10.3.1.30.impera: . 0:1(1) ack 1 win 164 09:09:13.633900 IP 10.3.1.30.impera > server073.afs3-callback: . ack 1 win 64180 09:09:23.373634 IP 10.3.1.30.impera > server073.afs3-callback: . 1:2(1) ack 1 win 64180 09:09:23.373647 IP server073.afs3-callback > 10.3.1.30.impera: . ack 2 win 65535 while on production, that traffic is not there. we want to know where this traffic is initiated from to implement on production to sense disconnection our comms parameters are: tcp_keepcnt = 2 tcp_keepidle = 100 tcp_keepinit = 150 tcp_keepintvl = 150 tcp_finwait2 = 1200 can anyone help?

    Read the article

  • How do I make my Geforce GTS 250's power save mode stop causing audio stuttering?

    - by Matt
    Whenever my GTS 250 enters its power save mode, downscaling its frequencies, my audio stutters. This affects both my onboard audio and my Audigy Soundblaster 2 ZS. Changing Windows power save mode options such as PCI-E link state power management or Power Management Mode in the nVidia control panel have no effect on this issue. Replacing the power supply had no effect on this issue. The BIOS is the latest version, and I have the latest motherboard chipset and graphics drivers installed. I do not overclock. I started to see this issue after I upgraded my rig from its Socket 939 board to a Socket 1156 board with a Core i5-750 while simultaneously upgrading from Vista to 7.

    Read the article

  • Using wget to download pdf files from a site that requires cookies to be set

    - by matt74tm
    I want to access a newspaper site and then download their epaper copies (in PDF). The site requires me to login using my email address and password and then it permits me to access those PDF URLs. I'm having trouble 'setting my session' in wget. When I login into the site from my browser, it sets two cookie values: [email protected] Password=12345 I tried: wget --post-data "[email protected]&Password=12345" http://epaper.abc.com/login.aspx However, that just downloaded the login page and saved it locally The FORM on the login page has two fields: txtUserID txtPassword and radiobuttons like this: <input id="rbtnManchester" type="radio" checked="checked" name="txtpub" value="44"> Another button: <input id="rbtnLondon" type="radio" name="txtpub" value="64"> If I post this to the login.aspx page, I get the same output wget --post-data "[email protected]&txtPassword=12345&txtpub=44" http://epaper.abc.com/login.aspx If I do: --save-cookies abc_cookies.txt it doesnt seem to have anything other than the default content. For the last if I do --debug as well it says: ... Set-Cookie: ASP.NET_SessionId=05kphcn4hjmblq45qgnjoe41; path=/; HttpOnly ... Stored cookie epaper.abc.com -1 (ANY) / <session> <insecure> [expiry none] ASP.NET_SessionId 05kphcn4hjmblq45qgnjoe41 Length: 107253 (105K) [text/html] Saving to: `login.aspx' ... Saving cookies to abc_cookies.txt. However, abc_cookies.txt shows ONLY the following: # HTTP cookie file. # Generated by Wget on 2011-08-16 08:03:05. # Edit at your own risk. (Not sure why I'm not getting any responses on SO - perhaps SU is a better forum - http://stackoverflow.com/questions/7064171/using-wget-to-download-pdf-files-from-a-site-that-requires-cookies-to-be-set) EDIT 1 C:\Temp>wget --cookies=on --keep-session-cookies --save-cookies abc_cookies.txt --post-data "txtUserID=abc%40gmail.com&txtPassword=password&txtpub=44&chkbox=checkbox&submit.x=48&submit.y=7" http://epaper.abc.com/login.aspx --debug SYSTEM_WGETRC = c:/progra~1/wget/etc/wgetrc syswgetrc = C:\Program Files (x86)\GnuWin32/etc/wgetrc DEBUG output created by Wget 1.11.4 on Windows-MinGW. --2011-08-18 08:15:59-- http://epaper.abc.com/login.aspx Resolving epaper.abc.com... seconds 0.00, 999.999.99.99 Caching epaper.abc.com => 999.999.99.99 Connecting to epaper.abc.com|999.999.99.99|:80... seconds 0.00, connected. Created socket 300. Releasing 0x00a2ae80 (new refcount 1). ---request begin--- POST /login.aspx HTTP/1.0 User-Agent: Wget/1.11.4 Accept: */* Host: epaper.abc.com Connection: Keep-Alive Content-Type: application/x-www-form-urlencoded Content-Length: 100 ---request end--- [POST data: txtUserID=abc%40gmail.com&txtPassword=password&txtpub=44&chkbox=checkbox&submit.x=48&submit.y=7] HTTP request sent, awaiting response... ---response begin--- HTTP/1.1 200 OK Connection: keep-alive Date: Thu, 18 Aug 2011 02:46:17 GMT Server: Microsoft-IIS/6.0 X-Powered-By: ASP.NET X-AspNet-Version: 2.0.50727 Set-Cookie: ASP.NET_SessionId=owcrje55yl45kgmhn43gq145; path=/; HttpOnly Cache-Control: private Content-Type: text/html; charset=utf-8 Content-Length: 107253 ---response end--- 200 OK Registered socket 300 for persistent reuse. Stored cookie epaper.abc.com -1 (ANY) / <session> <insecure> [expiry none] ASP.NET_SessionId owcrje55yl45kgmhn43gq145 Length: 107253 (105K) [text/html] Saving to: `login.aspx.1' 100%[======================================================================================================================>] 107,253 24.9K/s in 4.2s 2011-08-18 08:16:05 (24.9 KB/s) - `login.aspx.1' saved [107253/107253] Saving cookies to abc_cookies.txt. Done saving cookies. C:\Temp>wget --referer=http://epaper.abc.com/login.aspx --cookies=on --load-cookies abc_cookies.txt --keep-session-cookies --save-cookies abc_cookies.txt http://epaper.abc.com/PagePrint/16_08_2011_001.pdf --debug SYSTEM_WGETRC = c:/progra~1/wget/etc/wgetrc syswgetrc = C:\Program Files (x86)\GnuWin32/etc/wgetrc DEBUG output created by Wget 1.11.4 on Windows-MinGW. Stored cookie epaper.abc.com -1 (ANY) / <session> <insecure> [expiry none] ASP.NET_SessionId owcrje55yl45kgmhn43gq145 --2011-08-18 08:16:12-- http://epaper.abc.com/PagePrint/16_08_2011_001.pdf Resolving epaper.abc.com... seconds 0.00, 999.999.99.99 Caching epaper.abc.com => 999.999.99.99 Connecting to epaper.abc.com|999.999.99.99|:80... seconds 0.00, connected. Created socket 300. Releasing 0x00598290 (new refcount 1). ---request begin--- GET /PagePrint/16_08_2011_001.pdf HTTP/1.0 Referer: http://epaper.abc.com/login.aspx User-Agent: Wget/1.11.4 Accept: */* Host: epaper.abc.com Connection: Keep-Alive Cookie: ASP.NET_SessionId=owcrje55yl45kgmhn43gq145 ---request end--- HTTP request sent, awaiting response... ---response begin--- HTTP/1.1 200 OK Connection: keep-alive Date: Thu, 18 Aug 2011 02:46:30 GMT Server: Microsoft-IIS/6.0 X-Powered-By: ASP.NET X-AspNet-Version: 2.0.50727 content-disposition: attachement; filename=Default_logo.gif Cache-Control: private Content-Type: image/GIF Content-Length: 4568 ---response end--- 200 OK Registered socket 300 for persistent reuse. Length: 4568 (4.5K) [image/GIF] Saving to: `16_08_2011_001.pdf' 100%[======================================================================================================================>] 4,568 7.74K/s in 0.6s 2011-08-18 08:16:14 (7.74 KB/s) - `16_08_2011_001.pdf' saved [4568/4568] Saving cookies to abc_cookies.txt. Done saving cookies. Contents of abc_cookies.txt epaper.abc.com FALSE / FALSE 0 ASP.NET_SessionId owcrje55yl45kgmhn43gq145

    Read the article

  • NginX & PHP-FPM, random 502.

    - by pestaa
    2010/09/19 14:52:07 [error] 1419#0: *10220 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: [...], server: [...], request: "POST /[...] HTTP/1.1", upstream: "fastcgi://unix:/server/php-fpm.sock:", host: "[...]", referrer: "[...]" This is the error I'm receiving randomly. 95% of the time my setup works perfectly, but once in a while I'm getting 502 for 3-4 subsequent requests. I'm using Unix socket between the server and the PHP process as you can see, also have set up FastCGI params (SCRIPT_FILENAME), etc. correctly. What can I do about it to strengthen the connection between these services? Thank you very much in advance.

    Read the article

  • How do i enable innodb on ubuntu server 10.04

    - by Matt
    Here is my entire my.cnf [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] key_buffer = 224M sort_buffer_size = 4M read_buffer_size = 4M read_rnd_buffer_size = 4M myisam_sort_buffer_size = 12M query_cache_size = 44M # # * Basic Settings # # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 127.0.0.1 # # * Fine Tuning # #key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M #query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 log_error = /var/log/mysql/error.log # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ And here is my show engines call....i have no idea what i need to do to enable innodb show engines; +------------+---------+----------------------------------------------------------------+--------------+------+------------+ | Engine | Support | Comment | Transactions | XA | Savepoints | +------------+---------+----------------------------------------------------------------+--------------+------+------------+ | MyISAM | DEFAULT | Default engine as of MySQL 3.23 with great performance | NO | NO | NO | | MRG_MYISAM | YES | Collection of identical MyISAM tables | NO | NO | NO | | BLACKHOLE | YES | /dev/null storage engine (anything you write to it disappears) | NO | NO | NO | | CSV | YES | CSV storage engine | NO | NO | NO | | MEMORY | YES | Hash based, stored in memory, useful for temporary tables | NO | NO | NO | | FEDERATED | NO | Federated MySQL storage engine | NULL | NULL | NULL | | ARCHIVE | YES | Archive storage engine | NO | NO | NO | +------------+---------+----------------------------------------------------------------+--------------+------+------------+ 7 rows in set (0.00 sec)

    Read the article

  • Linux Bridge, Samba netbios name/hostname access

    - by Christopher Wilson
    I am currently running a linux bridge in the following configuration ADSL Modem: 192.168.1.1 Linux Bridge: eth0: 192.168.1.2 eth1: no address Wireless Router: 192.168.0.1 My issue is that i cannot access the "Linux Bridge" shares using the WINS name of the server via client systems (yes i understand it is a transparent bridge but i can access it via the 192.168.1.2 address this is not on the same subnet as the client systems). This is the global section of my SMB.CONF [global] unix extensions = off os level = 20 netbios name = server guest account = nobody server string = 447 Server security = share #unix extensions = no #wins support = yes #wins server = 192.168.0.1 name resolve order = wins lmhosts hosts bcast interfaces bridge1 eth0 eth1 lo bind interfaces only = yes Can i access a bridged server using it's WINS name to access samba shares? Cheers Chris

    Read the article

  • OSX chown problems after creating users with dscl

    - by RandomInsano
    Alright, so I've made a user and a group using dscl as follows: dscl . -create /Users/deadline dscl . -create /Groups/deadline dscl . -append /Groups/deadline GroupMembership deadline Now I'm trying to chown things like so: mkdir /tmp/stuff chown deadline:deadline /tmp/stuff But the problem is that it sets the user and group to nobody instead of this user 'deadline'. What magic voodoo property do I need to add to the user and group to have it set the unix permissions properly? Also, why must Apple hate me and my Unix background :(

    Read the article

  • Using powershell call native command-line app and capture STDERR

    - by crtracy
    I'm using a port of a cygwin tool on Windows which writes normal status messages to STRERR. This produces ugly output when run from PowerShell: PS> dos2unix.exe -n StartApp.sh StartApp_fixed.sh dos2unix.exe : dos2unix: converting file StartEC3.sh to file StartEC3_fixed.sh in UNIX format ... At line:1 char:13 + dos2unix.exe <<<< -n StartApp.sh StartApp_fixed.sh + CategoryInfo : NotSpecified: (dos2unix: conve...UNIX format ...:String) [], RemoteException + FullyQualifiedErrorId : NativeCommandError Is there a better way? P.S. I intend to post one solution I've found and compare it to answers from others.

    Read the article

  • Signed and unsigned, and how bit extension works

    - by hatorade
    unsigned short s; s = 0xffff; int i = s; How does the extension work here? 2 larger order bytes are added, but I'm confused whether 1's or 0's are extended there. This is probably platform dependent so let's focus on what Unix does. Would the two bigger order bytes of the int be filled with 1's or 0's, and why? Basically, does the computer know that s is unsigned, and correctly assign 0's to the higher order bits of the int? So i is now 0x0000ffff? Or since ints are default signed in unix does it take the signed bit from s (a 1) and copy that to the higher order bytes?

    Read the article

  • Backup broken PostgreSQL 8.4 without pg_dump

    - by Daniil
    So. I have a problem. PostgreSQL 8.4 won't start or restart without any output given. But it worked for 3 monthes until hosting provider doesn't rebooted server. Now it is completly broken. It wan't start and doesn't give any output or log. pg_dump: [archiver (db)] connection to database "postgres" failed: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"? Now I want to backup (or just start pgsql socket) my database to reinstall postgesql. How?

    Read the article

  • MySQL Server Not Starting on Boot

    - by Brian
    I have installed MySQL on a RHEL 5 server and I'm wanting to set it up so that the server starts on boot. I've ran the "chkconfig --list mysqld" command and it's currently running on levels 3, 4 and 5. However, when I reboot the server, no mysqld process is started. I've also tried manually starting the server by executing "/usr/bin/mysqld_safe" and I get the following output: Starting mysqld daemon with databases from /var/lib/mysql STOPPING server from pid file /var/run/mysqld/mysqld.pid 100319 10:31:30 mysqld ended I looked in /var/log/mysqld.log and I found the following: 100319 10:29:01 mysqld started 100319 10:29:02 InnoDB: Started; log sequence number 0 29752204 100319 10:29:02 [ERROR] Can't start server : Bind on unix socket: Permission denied 100319 10:29:02 [ERROR] Do you already have another mysqld server running on socket: /var/lib/mysql/mysql.sock ? 100319 10:29:02 [ERROR] Aborting

    Read the article

  • Cat5 wiring in my home [closed]

    - by Mike
    I have problem with cat5 cabling First I ran a length of cable 30 metres to my bedroom 1 and and connected both ends to a wall sockets internally using my punch down tool, both ends look fine. I also ran a cable from bedroom 1 to bedroom 2 so my son can use same internet connection , i then parallel connected my cables in bedroom 1 against using punch down tool using same colours all the way through. I ran a Ethernet cable from modem to first wall socket close to it then at bedroom end used another Ethernet cable to connect pc, it wouldn't connect to pc so I disconnected bedroom 2 cable from bedroom 1 socket. I connected bedroom 1 to pc and it worked, but how do I connect bedroom 2 (obviously cat 5 cable bedroom 1 to 2 is in place) As soon as I connect one wire from bedroom2 I loose Internet connection!

    Read the article

  • Cant register this user

    - by holgero
    I wanted to ask this question on meta, but it said, I have to log in first (which is where I have the problem!) I answered a question with this user. But when I tried to register and click on the stack exchange icon, it only displays three dots (animated) and never comes back. I suspected a firefox problem so I tried firefox on windows: And yes, I was able to create an account linked with my other accounts ( http://unix.stackexchange.com/users/27867/holgero and http://stackoverflow.com/users/1779245/holgero ) when I ran the latest firefox version under windows 7 in a virtual box. Then I upgraded my linux firefox to the newest version and deleted the other account under windows again. But still I cannot register this account ( http://superuser.com/users/177338/holgero ). On unix.stackexchange or stackoverflow I never had any problems with the registration, superuser seems to be different. So, how do I register this user and have it linked with my other stackexchange accounts?

    Read the article

  • Unreasonably slow stunnel

    - by Kit Sunde
    I setup stunnel on OSX to tunnel traffic to my Django dev server because Facebook needs HTTPS these days but I noticed it's being absurdly slow. It seems like it can only handle a single connection at a time and even the connection is slow when I'm connecting to localhost. I've tried using some performance tips found online and so my config is setup as: pid= # foreground=yes cert=./cacert.pem key=./privkey.pem libwrap=no debug=0 socket = l:TCP_NODELAY=1 socket = r:TCP_NODELAY=1 [https] accept=8443 connect=8000 Is there a way to get more performance or more suitable way of setting up HTTPS for my dev server?

    Read the article

  • rsync to cifs mount but preserve permissions

    - by weberwithoneb
    I'm backing up a linux server to a windows share. I'm currently mounting the windows share with cifs and using rsync for incremental backups. File permissions and ownership are not being preserved, as should be expected after reading this samba document: The core CIFS protocol does not provide unix ownership information or mode for files and directories. Because of this, files and directories will generally appear to be owned by whatever values the uid= or gid= options are set, and will have permissions set to the default file_mode and dir_mode for the mount. How can I achieve my goal of preserving unix file permissions while writing to a windows share? Is there another network file system that would allow me to do this? Thanks.

    Read the article

< Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >