Search Results

Search found 6870 results on 275 pages for 'usb powered'.

Page 125/275 | < Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >

  • Acer Aspire 5315 Boot order doesn't show CD-ROM

    - by Shaik
    Hi, I have an ACER ASPIRE 5315 laptop. I want use the recovery disk but, the boot manager does not show the CD-ROM bootable option. In the BIOS settings the I set the boot priority to USB CD-ROM first and then the harddrive. But its not working. When I press F12 the boot manager doesnot show the USB CD-ROM device. Please assist. Thanks in advance, Shaik

    Read the article

  • How to change the "record external input" in Fraps?

    - by CyanPrime
    I'm using a TV to USB capture thingy called Hauppauge USB-Live2 (http://www.hauppauge.com/site/products/data_usblive2.html) and I'm using Media Player Classic Home Cinema to view my device's output, and finally I'm using Fraps to record the output off of MPC. It all works nicely except I can't get my mic to record, or even show up in the "Record External Input" area of Fraps while my Hauppauge is plugged in. My question is: How can I select my mic as the "record external input" in fraps?

    Read the article

  • video player recommendation (hardware)

    - by Fuxi
    hi all, i'm looking for a hardware-videoplayer with the following features: support for all kind of video formats from the web (xvid, divx, mpeg ..) w/o problems slots for memory cards like cf/sd usb connector for external devices like hd/usb sticks updateable firmware support for .srt files (subtitles) - option to change eg. fontsize currently i'm having a dvd player with memory slot but it only supports a few formats and it's very annoying having to convert anything - mostly it doesn't work. thx in advance

    Read the article

  • Install boot loader with no operating system on hard drive

    - by Jeet Robert
    I am trying to reset — or rather, install — a boot loader on my hard drive. I initially had a Linux distro installed, which I completely wiped out. Now, when I try to install Windows 7 from my USB, my machine says Missing operating System And when I don't boot with USB, it says "bootmgr is missing" So now I am wondering, how I can install a boot loader, so I can install Windows 7?

    Read the article

  • How to use bluetooth keyboard with both Android and WIndows 8?

    - by mathStudent
    I purchased this Logitech bluetooth keyboard which, according to the specifications on the page, can switch between both Android and Windows 8 devices. I haven't figured out how to do this. Is a specific type of bluetooth USB adapter required? And even assuming I had the necessary USB adapter, what commands must be executed (on the keyboard, Android, or Windows 8 machines) for the bluetooth keyboard to switch between devices?

    Read the article

  • permission not to change on eth0 file?

    - by user133916
    I am logged in as a root user i want to edit my /etc/sysconfig/network-scripts/ifcfg-eth0 file when i edit this showing -- INSERT -- W10: Warning: Changing a readonly file while i have logged in as root user my mount showing [root@s1202 ~]# mount rootfs on / type rootfs (rw) /dev/root on / type ext3 (ro,data=ordered) /dev on /dev type tmpfs (rw) /proc on /proc type proc (rw) /sys on /sys type sysfs (rw) /proc/bus/usb on /proc/bus/usb type usbfs (rw)

    Read the article

  • Installing Windows 8 on SSD

    - by StoneFX
    I'm trying to install Windows 8 (CP) on a 2nd SSD that I have (the 1st SSD has Windows 7). I boot into the installation from a usb stick, select the SSD, and launch the installation. When the computer goes to reboot during the install process, it keeps going back into the usb stick or my Windows 7 installation. It never recognizes the installation on the 2nd SSD. Is there something I'm doing wrong?

    Read the article

  • "this device cannot start error code 10" ?

    - by Neo
    I am trying to install GPS driver for gmm-u1lp.I think which is just a virtual com port driver. It just contains following INF file: [Version] Signature="$Windows NT$" Class=Ports ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} Provider=%MTK% ;LayoutFile=layout.inf DriverVer=06/12/2007,1.0.0.1 [Manufacturer] %MTK%=MTK [MTK] %MTK3329%=Reader,USB\Vid_0e8d&Pid_3329 [Reader_Install.NTx86] ;Windows2000 [DestinationDirs] DefaultDestDir=12 Reader.NT.Copy=12 [Reader.NT] Include=mdmcpq.inf CopyFiles=FakeModemCopyFileSection AddReg=Reader.NT.AddReg [Reader.NT.AddReg] HKR,,DevLoader,,*ntkern HKR,,NTMPDriver,,usbser.sys HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" [Reader.NT.Services] AddService = usbser, 0x00000002, Service_Inst [Service_Inst] DisplayName = %Serial.SvcDesc% ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 3 ; SERVICE_DEMAND_START ErrorControl = 1 ; SERVICE_ERROR_NORMAL ServiceBinary = %12%\usbser.sys LoadOrderGroup = Base [Strings] MTK = "Media Tek Inc." MTK3329 = "GPS USB Serial Interface Driver" Serial.SvcDesc = "GPS USB Serial Interface Driver" After installing this Inf,device details shows:"device cannot start error code 10". What is the exact problem? Do I need to test this after connecting the Device?

    Read the article

  • 2 fundamental questions for the Androgurus ...Can someone guide me

    - by Saul Carpenter
    I have'nt plunged into Android Development as yet though Java Classes C++ all that is not new to me. Here are the questions folks. Appreciated any help on these : - If I need to develop test and deploy Android Apps do I NEED AN ANDROID Hardware device or is there a software Android Simulator like VMWARE or Virtual PC , where I can emulate the results.If there is such can you point me more info I have a Netbook ( the Chinese Ipad Clone ) running Android that has only Wi-Fi for the present. Is it possible to add the following features via the spare USB Port --- a USB Based 56K Modem : Are there Android platform H/W Drivers. --- a USB based RJ45 ( Ethernet LAN LandLine connection ) Adapter :Are there Android platform H/W Drivers. Please advise Thanks Saul

    Read the article

  • Debugging android application on HTC Hero

    - by w00tfest99
    Is it possible to connect the ADB with an HTC Hero? I tried following the instructions for the Win USB driver but when I try to install the driver I just get a generic message saying that there was a problem installing the driver. Looking at the supported devices, the HTC Hero isn't listed. Is this even possible? As a note, I've tried removing drivers and then re-adding using USBDeview and I've also tried adding in the line ";HTC Hero %USB\VID_0BB4&PID_0FFE.DeviceDescRelease%=androidusb.Dev, USB\Vid_0bb4&Pid_0ffe&Rev_0100" in the inf file for the driver.

    Read the article

  • Abort a slow flush to disk after write?

    - by Therealstubot
    Is there a way to abort a python write operation in such a way that the OS doesn't feel it's necessary to flush the unwritten data to the disc? I'm writing data to a USB device, typically many megabytes. I'm using 4096 bytes as my block size on the write, but it appears that Linux caches up a bunch of data early on, and write it out to the USB device slowly. If at some point during the write, my user decides to cancel, I want the app to just stop writing immediately. I can see that there's a delay between when the data stops flowing from the application, and the USB activity light stops blinking. Several seconds, up to about 10 seconds typically. I find that the app is holding in the close() method, I'm assuming, waiting for the OS to finish writing the buffered data. I call flush() after every write, but that doesn't appear to have any impact on the delay. I've scoured the python docs for an answer but have found nothing.

    Read the article

  • A peculiar problem

    - by rajivpradeep
    I have an application on a pen drive, which executes some flash files on the same USB flash drive. when i run the application with in the drive, the application just keeps running in the back ground without running the flash files. When i copy the application on desktop, it runs the flash files in the USB. Also i programmed the app to write log file, when i run the application with in USB, the app is running but the log file is not getting written, when i remove the pen drive, the file gets written. What might be the problem, I am using VC++ , VS 2008 to build the application.

    Read the article

  • How do I add "Press any key to boot from usb" when installing Windows from a flash drive? (Grub4dos question / how to remove a bootloader)

    - by Vincent
    Hi there! I've been struggling with this problem for a while now and finially decided to ask for help. Let me first explain what the main purpose of the app is: to provide the a very easy to use way of backing up files, after which I format the drive and start Windows 7 setup. I do this by booting WinPE, which runs a script to detect Windows installations and then opens a file browser. After the file browser is closed, the script continues and formats the drive that contains the Windows installation, and starts an unattended Windows 7 install. Now here is the problem: When you start Windows setup or WinPE from a dvd, you get a nice option to "Press any key to boot from DVD". This is to prevent the computer from booting the DVD when the first phase of the installation is complete and the computer reboots. However, when booting from a flash drive, Windows does not provide this option: it simply boots the flash drive every reboot. To replicate the "press any key" function, I installed Grub4Dos, which works great. It provides a small menu, the first standard item being "Continue installation", the second being "start installation". After quite a lot of tweaking, I got everything working: Start installation starts WinPE, which in turn starts the Windows installation. At first reboot, the Grub4Dos menu comes up, counts 5 seconds and boots the second stage of the installation. Here, I am greeted with the error: "Windows setup could not configure windows to run on this computer's hardware." When I boot into WinPE the normal way (put the bootmgr on the stick root) and change my bios to boot from the primary hdd after first reboot, I don't get this error. I've been looking around, and the only thing I could find was that the BIOS automatically names the boot device hd0, and that Windows can only be run / installed to hd 0. I'm not sure if this is the problem. I read about remapping to solve this problem, but to do that you have to know the phisical location of the hard drive and partition, like hd(0,1). I want this flash drive to work on any PC, regardless of where the OS is installed, so that's not really a possibility. A possible fix I thought of is removing the bootloader from the flash drive when I'm in WinPE. That way, when the pc reboots the BIOS will not see the flash drive as a boot drive and instead boot the primary hdd. I have yet to find a way to do this. Thank you for reading my question, and if you have any suggestion, please do.

    Read the article

  • PHP or JS to connect with fingerprint scanner save to database

    - by narong
    I have a project to set profile user and save all data to database include fingerprint also. i don't what i should start, I have USB finger scanner already to test. What i think: i should have a input box to read data from USB finger scanner than i should create a function to upload it database. but with this thinking i meet problem: i don't know data that get from USB finger scanner is image or data? if image, how i can read it to input box to save to database ? Anyone have any idea, please share me to resolve it. I am looking to see your helping soon! thanks

    Read the article

  • WMI instrinsic events. Resources

    - by Nickolodeon
    Hi. I subscribe to usb inserted event like this select * FROM __INSTANCECREATIONEVENT WITHIN 3 WHERE TARGETINSTANCE ISA Win32_DiskDrive After inserting usb flash it blinks every 3 seconds. This is polling interval and intrinsic events work by polling object that's in query. Now, we know these types of events may be resource expensive. (Putting value greater then 3 sometimes chokes these events and client program doesn't get notified). Are there other ways to do that, so that usb doesn't get scanned all the time? May be there some extrinsic events available? Right now the only solution I see is to unsubscribe from event above once it trigerred and resubscribe to it in __INSTANCEDELETIONEVENT handler. Hm, althought deletionevent will also poll diskdrive controllers(

    Read the article

  • How to change a remote repository URI using Git?

    - by e-satis
    I have a repo (origin) on an USB key that I cloned on my hardrive (local). I moved "origin" to a NAS and I successfully tested cloning it from here. I would like to know if I can change the uri of "origin" in the settings of "local" so it now pull from the NAS, and not from the USB key. For now, I can see two solutions : - pushing everything to the usb-orign, and copy it to the NAS again (implies a lot of work due to new commits to nas-origin); - adding a new remote to "local" and delete the old one (i fear I'll break my historic).

    Read the article

  • Is this a graphics card failure?

    - by Alexander Lozada
    I own an older 32-bit Dell XPS 410 that I intended to use for gaming. Currently, I have a ATI Radeon 4000 series card installed, along with a Core 2 Duo and Ubuntu 12.10. I'm fairly certain that my problem is a GPU failure - but before I spend money on a new one, I want to make sure other components aren't the problem/if it would be cheaper just to buy a new PC. Here are my symptoms: Computer power button remains orange (usually green when successfully started.) A fan gets increasingly faster until powered off. Monitor remains black when started, receiving no signal. When powered on, the computer will power itself off near instantly, and then turn on again. If startup is successful, sometimes the screen will become jittered and unusable unless restarted. Is this just a GPU failure, or something more extensive like the motherboard?

    Read the article

  • IBM Bladecentre H Bootup Sequence Control

    - by Spence
    I have a bladecentre with blades, network and a SAN in a single rack. What I'd like to do is control the startup of the bladecentre so that when the rack is powered on that the blades will delay their bootup until the SAN is powered on correctly. Is this even possible? We have an AMM in the chassis if that helps. Basically we are looking into the reboot that occurs after power is restored to a UPS. I sincerely apologise for the noobness of this question, but I am a software guy trying to help :)

    Read the article

  • IBM Bladecentre H Bootup

    - by Spence
    I have a bladecentre with blades, network and a SAN in a single rack. What I'd like to do is control the startup of the bladecentre so that when the rack is powered on that the blades will delay their bootup until the SAN is powered on correctly. Is this even possible? We have an AMM in the chassis if that helps. Basically we are looking into the reboot that occurs after power is restored to a UPS. I sincerely apologise for the noobness of this question, but I am a software guy trying to help :)

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • Easy Install Resets Hardware Settings

    - by bob5972
    I think there's a problem with the Easy Install setup. I selected "Installer disc image," and it came up and said that it would use "Easy Install," I think I hit next, and then I went back changed my mind, and selected "I will install the operating system later." After finishing the wizard, I think it still went and ran Easy Install, because it auto-installed VMware tools and I never got to select anything for my windows setup. Then, when it was finished, all the hardware changes I had made were lost. The RAM was changed from 2 GB back to the default of 1 GB, my CD ROM drive was set back to "Use a Physical Drive" and "Connect at Power On", and the Floppy Drive was also set to "Connect at Power On", after I disabled them. I was trying to install Windows 7, and I wasn't sure if I could change the RAM settings after installation without needing to reactivate it, so I deleted the VM and tried to start over. This time, the "Installer disc image" had my Win7 image pre-selected, so I clicked "I will install it myself later," set my hardware again, and tried to boot off my CD. Again,it did an Easy Install, and reset my RAM and my drive settings. So I deleted it again and the third time it still had the Win7 image pre-selected, but this time I unplugged all the drives and let it try to boot off the empty harddrive and fail, and made sure it kept all my hardware settings. Then, I powered it off, put my Win7 image in the guest CD ROM, and powered it on. This time it finally let me run the installer and pick my language, and type a user name. This time when I powered it off it kept my hardware settings. I can duplicate the error by doing exactly the steps above. Creating a new VM, selecting my "Installer Image," hitting next, going back, selecting "I will Install it myself," and then finish the wizard, and customizing my hardware right before the end, setting the CD Rom drive to the same installer media, and setting "Connect on Power On." (If I start it without the CD ROM in the first time, it doesn't do it). When I power on, I'm not prompted for any install information (like language and user name), and when it runs the first timemy hardware choices are reset (like the RAM back to 1 GB). If it helps, I'm running VMware Workstation 7.0.1 build-227600 on Gentoo Linux

    Read the article

  • Easy Install Resets Hardware Settings

    - by bob5972
    I think there's a problem with the Easy Install setup. I selected "Installer disc image," and it came up and said that it would use "Easy Install," I think I hit next, and then I went back changed my mind, and selected "I will install the operating system later." After finishing the wizard, I think it still went and ran Easy Install, because it auto-installed VMware tools and I never got to select anything for my windows setup. Then, when it was finished, all the hardware changes I had made were lost. The RAM was changed from 2 GB back to the default of 1 GB, my CD ROM drive was set back to "Use a Physical Drive" and "Connect at Power On", and the Floppy Drive was also set to "Connect at Power On", after I disabled them. I was trying to install Windows 7, and I wasn't sure if I could change the RAM settings after installation without needing to reactivate it, so I deleted the VM and tried to start over. This time, the "Installer disc image" had my Win7 image pre-selected, so I clicked "I will install it myself later," set my hardware again, and tried to boot off my CD. Again,it did an Easy Install, and reset my RAM and my drive settings. So I deleted it again and the third time it still had the Win7 image pre-selected, but this time I unplugged all the drives and let it try to boot off the empty harddrive and fail, and made sure it kept all my hardware settings. Then, I powered it off, put my Win7 image in the guest CD ROM, and powered it on. This time it finally let me run the installer and pick my language, and type a user name. This time when I powered it off it kept my hardware settings. I can duplicate the error by doing exactly the steps above. Creating a new VM, selecting my "Installer Image," hitting next, going back, selecting "I will Install it myself," and then finish the wizard, and customizing my hardware right before the end, setting the CD Rom drive to the same installer media, and setting "Connect on Power On." (If I start it without the CD ROM in the first time, it doesn't do it). When I power on, I'm not prompted for any install information (like language and user name), and when it runs the first timemy hardware choices are reset (like the RAM back to 1 GB). If it helps, I'm running VMware Workstation 7.0.1 build-227600 on Gentoo Linux

    Read the article

  • SQL Server Agents jobs and turning off the server

    - by Tim Joseph
    I'm really new to SQL Agent jobs, but I am attempting to build up a maintainance regime for a server that will be turned off and on again at unknown intervals. It may run without being shutdown for a month, or it might only be turned on 9-5... we don't know and the client can't tell us because they don't know. So what I'm wondering is, what do I need to do to get SQL Server to run monthly and daily jobs either when they are due, or if the due date is missed, get them to be run when the server is next powered on. I could come up with a mish-mash of periodic jobs and 'on-power-up' jobs, but if there is something more elegant that would be wonderful. Obviously I'll need to ensure the SQL Server Agent is configure to start when the computer is powered up, but what else?

    Read the article

  • Ubuntu stopped recognizing my iPod

    - by flashnode
    Rythmbox on Ubuntu 10.10 used to recognize my 3rd gen Nano and transfer mp3s. Now I plug it in and Ubuntu doesn't pop-up that box that asks what you want to do anymore. It is only recognized if I reboot and the thing is plugged in. Here is the output to 'lsusb -v -s bus:device' Bus 001 Device 008: ID 05ac:1262 Apple, Inc. iPod Nano 3.Gen Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05ac Apple, Inc. idProduct 0x1262 iPod Nano 3.Gen bcdDevice 0.01 iManufacturer 1 Apple Inc. iProduct 2 iPod iSerial 3 000A27001A670128 bNumConfigurations 2 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 149 bNumInterfaces 3 bConfigurationValue 2 iConfiguration 4 iPod USB Interface bmAttributes 0xc0 Self Powered MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol 0 iInterface 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 1 (HEADER) bcdADC 1.00 wTotalLength 30 bInCollection 1 baInterfaceNr( 0) 1 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 1 wTerminalType 0x0201 Microphone bAssocTerminal 2 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 2 wTerminalType 0x0101 USB Streaming bAssocTerminal 1 bSourceID 1 iTerminal 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 2 bDelay 1 frames wFormatTag 1 PCM AudioStreaming Interface Descriptor: bLength 35 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 9 Discrete tSamFreq[ 0] 8000 tSamFreq[ 1] 11025 tSamFreq[ 2] 12000 tSamFreq[ 3] 16000 tSamFreq[ 4] 22050 tSamFreq[ 5] 24000 tSamFreq[ 6] 32000 tSamFreq[ 7] 44100 tSamFreq[ 8] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c0 1x 192 bytes bInterval 4 bRefresh 0 bSynchAddress 0 AudioControl Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 0 Undefined wLockDelay 0 Undefined Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.01 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 208 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 2 Device Status: 0x0000 (Bus Powered) This ubuntu forum told me to check the automount settings under /apps/nautilus/preferences/media_automount_open in gconf-editor. And I did that. Any clues?

    Read the article

  • View a pdf with quick webview though apache proxy

    - by Musa
    I have a site(IIS) that is accessed via a proxy in apache(on an IBM i). This site serves PDFs which has quick web view and if I access a pdf directly from the IIS server the PDFs starts to display immediately but if I go through the proxy I have to wait until the entire pdf downloads before I can view it. In the apache config file I use ProxyPass /path/ http://xxx.xxx.xxx.xxx/ <LocationMatch "/path/"> Header set Cache-Control "no-cache" </LocationMatch> I tried adding SetEnv proxy-sendcl to LocationMatch directive this had no effect. The PDFs that view quickly makes a lot of partial requests This is the initial request and response headers GET http://xxx.xxx.xxx.xxx/xxx.PDF HTTP/1.1 Host: xxx.xxx.xxx.xxx Proxy-Connection: keep-alive Cache-Control: no-cache Accept: text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,*/*;q=0.8 Pragma: no-cache User-Agent: Mozilla/5.0 (Windows NT 6.2; rv:9.0.1) Gecko/20100101 Firefox/9.0.1 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Cookie: chocolatechip HTTP/1.1 200 OK Via: 1.1 xxxxxxxx Connection: Keep-Alive Proxy-Connection: Keep-Alive Content-Length: 15330238 Date: Mon, 25 Aug 2014 12:48:31 GMT Content-Type: application/pdf ETag: "b6262940bbecf1:0" Server: Microsoft-IIS/7.5 Last-Modified: Fri, 22 Aug 2014 13:16:14 GMT Accept-Ranges: bytes X-Powered-By: ASP.NET This is a partial request and response GET http://xxx.xxx.xxx.xxx/xxx.PDF HTTP/1.1 Host: xxx.xxx.xxx.xxx Proxy-Connection: keep-alive Cache-Control: no-cache Pragma: no-cache User-Agent: Mozilla/5.0 (Windows NT 6.2; rv:9.0.1) Gecko/20100101 Firefox/9.0.1 Accept: */* Referer: http://xxx.xxx.xxx.xxx/xxxx.PDF Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Cookie: chocolatechip Range: bytes=0-32767 HTTP/1.1 206 Partial Content Via: 1.1 xxxxxxxx Connection: Keep-Alive Proxy-Connection: Keep-Alive Content-Length: 32768 Date: Mon, 25 Aug 2014 12:48:31 GMT Content-Range: bytes 0-32767/15330238 Content-Type: application/pdf ETag: "b6262940bbecf1:0" Server: Microsoft-IIS/7.5 Last-Modified: Fri, 22 Aug 2014 13:16:14 GMT Accept-Ranges: bytes X-Powered-By: ASP.NET These are the headers I get if I go through he proxy GET /path/xxx.PDF HTTP/1.1 Host: domain:xxxx Connection: keep-alive Cache-Control: no-cache Accept: text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,*/*;q=0.8 Pragma: no-cache User-Agent: Mozilla/5.0 (Windows NT 6.2; rv:9.0.1) Gecko/20100101 Firefox/9.0.1 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 HTTP/1.1 200 OK Date: Mon, 25 Aug 2014 13:28:42 GMT Server: Microsoft-IIS/7.5 Content-Type: application/pdf Last-Modified: Fri, 22 Aug 2014 13:16:14 GMT Accept-Ranges: bytes ETag: "b6262940bbecf1:0"-gzip X-Powered-By: ASP.NET Cache-Control: no-cache Expires: Thu, 24 Aug 2017 13:28:42 GMT Vary: Accept-Encoding Content-Encoding: gzip Keep-Alive: timeout=300, max=100 Connection: Keep-Alive Transfer-Encoding: chunked I'm guessing its because the proxy uses Transfer-Encoding: chunked but I'm not sure and wasn't able to turn it off to check. Browser Chrome 36.0.1985.143 m Using the native PDF viewer Any help to get the pdf quick web view through the proxy working would be appreciated.

    Read the article

< Previous Page | 121 122 123 124 125 126 127 128 129 130 131 132  | Next Page >