Search Results

Search found 56531 results on 2262 pages for 'arul wilson(at)oracle com'.

Page 126/2262 | < Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >

• Indirect Postfix bounces create new user directories

  - by hheimbuerger

  I'm running Postfix on my personal server in a data centre. I am not a professional mail hoster and not a Postfix expert, it is just used for a few domains served from that server. IIRC, I mostly followed this howto when setting up Postfix. Mails addressed to one of the domains the server manages are delivered locally (/srv/mail) to be fetched with Dovecot. Mails to other domains require usage of SMTPS. The mailbox configuration is stored in MySQL. The problem I have is that I suddenly found new mailboxes being created on the disk. Let's say I have the domain 'example.com'. Then I would have lots of new directories, e.g. /srv/mail/example.com/abenaackart /srv/mail/example.com/abenaacton etc. There are no entries for these addresses in my database, neither as a mailbox nor as an alias. It's clearly spam from auto-generated names. Most of them start with 'a', a few with 'b' and a couple of random ones with other letters. At first I was afraid of an attack, but all security restrictions seem to work. If I try to send mail to these addresses, I get an "Recipient address rejected: User unknown in virtual mailbox table" during the 'RCPT TO' stage. So I looked into the mails stored in these mailboxes. Turns out that all of them are bounces. It seems like all of them were sent from a randomly generated name to an alias that really exists on my system, but pointed to an invalid destination address on another host. So Postfix accepted it, then tried to redirect it to another mail server, which rejected it. This bounced back to my Postfix server, which now took the bounce and stored it locally -- because it seemed to be originating from one of the addresses it manages. Example: My Postfix server handles the example.com domain. alice@example.com is configured to redirect to alice@hotmail.com. alice@hotmail.com has since been deleted from the Hotmail servers. Spammer sends mail with FROM:bob@example.com and TO:alice@example.com. My Postfix server accepts the mail and tries to hand it off to hotmail.com. hotmail.com sends a bounce back. My Postfix server accepts the bounce and delivers it to /srv/mail/example.com/bob. The last step is what I don't want. I'm not quite sure what it should do instead, but creating hundreds of new mailboxes on my disk is not what I want... Any ideas how to get rid of this behaviour? I'll happily post parts of my configuration, but I'm not really sure where to start debugging the problem at this point.

  Read the article

• .htaccess to redirect any URL from a domain to a fixed URL on another domain

  - by AlexV

  Anyone can help me out with an .htaccess I'm trying to create? I want to redirect foo.com to foo.ca. Any URL from foo.com (with or without www and under http or https) will all be redirected to www.foo.ca. Some examples: http://www.foo.com/ -- http://www.foo.ca/ (http + www) https://www.foo.com/ -- http://www.foo.ca/ (https + www) http://foo.com/bar/ -- http://www.foo.ca/ (http + some url) https://foo.com/bar/ -- http://www.foo.ca/ (https + some url) http://www.foo.com/bar/ -- http://www.foo.ca/ (http + www + some url) https://www.foo.com/bar -- http://www.foo.ca/ (https + www + some url) Many thanks!

  Read the article

• Help setting up NSD daemon (DNS server)

  - by Catalin

  While searching for a secure dns server I came across the NSD project. I was really impressed by what seemed to me the best option out there that's open source. One problem thought their 'tutorial' is really not beginner friendly. I have basic DNS knoledge but what's in there is out of my league. I need to have multiple sites on this CentOS server I've recently got my hands on. They also need to receive email. Details: I have a master host and would love to set this in the way described in the rows that follow: masterhost.com -> ns1.masterhost.com mail.masterhost.com www.masterhost.com addonhost.com -> ns1.masterhost.com mail.masterhost.com www.addonhost.com And so on. Any help in setting up this DNS server please? All answers and suggestions are welcomed. Thank you in advance.

  Read the article

• Windows 2003 DNS or IIS6 Problem?

  - by Mario

  Weird DNS problem... We have an intranet located internally on a windows 2003 / iis6 server - DNS handled internally on another windows 2003 server. The intranet, amongst other functions, hosts a ecommerce store I wrote that sells nike apparel embroidered with our company logo. Up until recently, it would send an email to payroll and the cost would be deducted from the employees paycheck. lets say this store is located at http://mydomain.com (only available internally) Now, we've been told by the accountants that we can no longer auto deduct from payroll and the employee needs to pay with a credit card or cash. So i went to thawte.com and ordered an SSL cert to be on the safe side (even though the CC gateway is secure) and they told me i need to drop the .com from the domain name Not wanting to mess with a system thats perfectly functional, i created another DNS entry that just points to mydomain (no .com) and left the old one in there. so they would go to http://mydomain On my Mac (OS X 10.6) i can hit either one just fine On Windows XP / Windows XP Embedded or Windows 7 (the vast majority of the pc's on our network) http://mydomain - returns nothing http://mydomain.com still works https://mydomain.com works but says the cert is invalid (as it should, it was issued to mydomain - not mydomain.com) my question is: why does it work on my Mac and not on a Windows PC (i get dhcp and dns just like any other pc on the network) and will removing the .com one from the DNS server resolve this? I've done all the usual attempts - ipconfig /flushdns, ipconfig /renew and release even going so far as to stop and restart DNS client on my Windows 7 box; rebooting and shutting down - adding a regedit entry something along the lines of SecureResponses and rebooting nothing works... I think its the .com and the not conflicting in DNS but i'm not sure - and why not on OS X We're closed on sunday and i'm going to remote in and see what happens if i remove the .com from DNS but any other ideas? -Mario

  Read the article

• Postfix - Gmail - Mountain Lion // can't send mail

  - by miako

  I have read most of the tutorials found on google but still can't make it work. I run the command : date | mail -s "Test" yyyyyy@gmail.com . The log is this : Oct 22 11:38:00 XXX.local postfix/master[288]: daemon started -- version 2.9.2, configuration /etc/postfix Oct 22 11:38:00 XXX.local postfix/pickup[289]: 9D85418A031: uid=501 from=<me> Oct 22 11:38:00 XXX.local postfix/cleanup[291]: 9D85418A031: message-id=<[email protected]> Oct 22 11:38:00 XXX.local postfix/qmgr[290]: 9D85418A031: from=<[email protected]>, size=327, nrcpt=1 (queue active) Oct 22 11:38:00 XXX.local postfix/smtp[293]: initializing the client-side TLS engine Oct 22 11:38:02 XXX.local postfix/smtp[293]: setting up TLS connection to smtp.gmail.com[173.194.70.109]:587 Oct 22 11:38:02 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: TLS cipher list "ALL:!EXPORT:!LOW:+RC4:@STRENGTH:!eNULL" Oct 22 11:38:02 XXX.local postfix/smtp[293]: SSL_connect:before/connect initialization Oct 22 11:38:02 XXX.local postfix/smtp[293]: SSL_connect:SSLv2/v3 write client hello A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read server hello A Oct 22 11:38:03 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: certificate verification depth=2 verify=0 subject=/C=US/O=GeoTrust Inc./CN=GeoTrust Global CA Oct 22 11:38:03 --- last message repeated 1 time --- Oct 22 11:38:03 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: certificate verification depth=1 verify=1 subject=/C=US/O=Google Inc/CN=Google Internet Authority G2 Oct 22 11:38:03 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: certificate verification depth=0 verify=1 subject=/C=US/ST=California/L=Mountain View/O=Google Inc/CN=smtp.gmail.com Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read server certificate A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read server done A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 write client key exchange A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 write change cipher spec A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 write finished A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 flush data Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read server session ticket A Oct 22 11:38:03 XXX.local postfix/smtp[293]: SSL_connect:SSLv3 read finished A Oct 22 11:38:03 XXX.local postfix/smtp[293]: smtp.gmail.com[173.194.70.109]:587: subject_CN=smtp.gmail.com, issuer_CN=Google Internet Authority G2, fingerprint E4:CA:10:85:C3:53:00:E6:A1:D2:AC:C4:35:E4:A2:10, pkey_fingerprint=D6:06:2E:15:AF:DF:E9:50:A5:B4:E2:E4:C5:2E:F9:BA Oct 22 11:38:03 XXX.local postfix/smtp[293]: Untrusted TLS connection established to smtp.gmail.com[173.194.70.109]:587: TLSv1 with cipher RC4-SHA (128/128 bits) Oct 22 11:38:03 XXX.local postfix/smtp[293]: 9D85418A031: to=<[email protected]>, relay=smtp.gmail.com[173.194.70.109]:587, delay=3.4, delays=0.26/0.13/2.8/0.26, dsn=5.5.1, status=bounced (host smtp.gmail.com[173.194.70.109] said: 530-5.5.1 Authentication Required. Learn more at 530 5.5.1 http://support.google.com/mail/bin/answer.py?answer=14257 s3sm54097220eeo.3 - gsmtp (in reply to MAIL FROM command)) Oct 22 11:38:04 XXX.local postfix/cleanup[291]: D4D2F18A03C: message-id=<[email protected]> Oct 22 11:38:04 XXX.local postfix/qmgr[290]: D4D2F18A03C: from=<>, size=2382, nrcpt=1 (queue active) Oct 22 11:38:04 XXX.local postfix/bounce[297]: 9D85418A031: sender non-delivery notification: D4D2F18A03C Oct 22 11:38:04 XXX.local postfix/qmgr[290]: 9D85418A031: removed Oct 22 11:38:04 XXX.local postfix/local[298]: D4D2F18A03C: to=<[email protected]>, relay=local, delay=0.11, delays=0/0.08/0/0.02, dsn=2.0.0, status=sent (delivered to mailbox) Oct 22 11:38:04 XXX.local postfix/qmgr[290]: D4D2F18A03C: removed Oct 22 11:39:00 XXX.local postfix/master[288]: master exit time has arrived I am really confused as i have never setup MTA again an i need it for local web development. I don't use XAMPP. I use the built in Servers. Can anyone guide me?

  Read the article

• Apache2 ignores ServerAlias

  - by Galen

  the www versions of all my sites work. the non-www version don't work. All non-www versions go to my default vhost (galengrover.com) Here are the first 2 virtual hosts in httpd.conf. ServerName galengrover.com NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin galenjr@gmail.com DocumentRoot /var/www/sites/galengrover.com/html ServerName www.galengrover.com ServerAlias galengrover.com </VirtualHost> <VirtualHost *:80> ServerAdmin galenjr@gmail.com DocumentRoot /var/www/sites/skatevideosonline.net/html ServerName www.skatevideosonline.net ServerAlias skatevideosonline.com </VirtualHost> Im clueless. Thanks

  Read the article

• Unable to SSH into EC2 instance on Fedora 17

  - by abhishek

  I did following steps But I am not able to SSH to it(Same steps work fine on Fedora 14 image). I am getting Permission denied (publickey,gssapi-keyex,gssapi-with-mic) I created new instance using fedora 17 amazon community image(ami-2ea50247). I copied my ssh keys under /home/usertest/.ssh/ after creating a usertest I have SELINUX=disabled here is Debug info: $ ssh -vvv ec2-54-243-101-41.compute-1.amazonaws.com ssh -vvv ec2-54-243-101-41.compute-1.amazonaws.com OpenSSH_5.2p1, OpenSSL 1.0.0b-fips 16 Nov 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ec2-54-243-101-41.compute-1.amazonaws.com [54.243.101.41] port 22. debug1: Connection established. debug1: identity file /home/usertest/.ssh/identity type -1 debug1: identity file /home/usertest/.ssh/id_rsa type -1 debug3: Not a RSA1 key file /home/usertest/.ssh/id_dsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'Proc-Type:' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'DEK-Info:' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/usertest/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9 debug1: match: OpenSSH_5.9 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,zlib@openssh.com debug2: kex_parse_kexinit: none,zlib@openssh.com debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 131/256 debug2: bits set: 506/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: filename /home/usertest/.ssh/known_hosts debug3: check_host_in_hostfile: match line 17 debug3: check_host_in_hostfile: filename /home/usertest/.ssh/known_hosts debug3: check_host_in_hostfile: match line 17 debug1: Host 'ec2-54-243-101-41.compute-1.amazonaws.com' is known and matches the RSA host key. debug1: Found key in /home/usertest/.ssh/known_hosts:17 debug2: bits set: 500/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/usertest/.ssh/identity ((nil)) debug2: key: /home/usertest/.ssh/id_rsa ((nil)) debug2: key: /home/usertest/.ssh/id_dsa (0x7f904b5ae260) debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug3: start over, passed a different list publickey,gssapi-keyex,gssapi-with-mic debug3: preferred gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup gssapi-with-mic debug3: remaining preferred: publickey,keyboard-interactive,password debug3: authmethod_is_enabled gssapi-with-mic debug1: Next authentication method: gssapi-with-mic debug3: Trying to reverse map address 54.243.101.41. debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information debug2: we did not send a packet, disable method debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/usertest/.ssh/identity debug3: no such identity: /home/usertest/.ssh/identity debug1: Trying private key: /home/usertest/.ssh/id_rsa debug3: no such identity: /home/usertest/.ssh/id_rsa debug1: Offering public key: /home/usertest/.ssh/id_dsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug2: we did not send a packet, disable method debug1: No more authentication methods to try. Permission denied (publickey,gssapi-keyex,gssapi-with-mic).

  Read the article

• Remote Sending of Emails via SMTP/EXIM Issue

  - by Christian Noel

  I have been encountering a problem when sending messages via EXIM. Here is the scenario: I have 2 servers lets just say host1.com = where all my apps and programs are hosted. host2.com = is another server which handles some apps but is also my smtp mail server. whm and cpanel are installed in both hosts as well as exim. right now, messages are being sent out as anyuser@host2.com to clients. host1.com uses the anyuser@host2.com so that it can send messages outbound as well. here's the problem, after a few hours from a fresh reboot of host1.com, sending messages from host1.com is no longer possible because i encounter an error that states: system/vendor/swift/Swift/Connection/SMTP.php [309]: The SMTP connection failed to start [tls://mail.host2.com]: fsockopen returned Error Number 110 and Error String 'Connection timed out'` also note that this was working fine earlier (like 10 hours ago) but then it suddenly fails. everytime i restart the host1.com then sending messages will work again. i have checked logs and traces but to no avail the only means of fixing this problem is restarting host1.com.

  Read the article

• One nginx rules for lots of subdomain

  - by komase

  I have lots of subdomain in a server. Every subdomain has its own Drupal boost rules, like in below codes: server { server_name subdomain1.website.com; location / { root /var/www/html/subdomain/subdomain1.website.com; index index.php; set $boost ""; set $boost_query "_"; if ( $request_method = GET ) { set $boost G; } if ($http_cookie !~ "DRUPAL_UID") { set $boost "${boost}D"; } if ($query_string = "") { set $boost "${boost}Q"; } if ( -f $document_root/cache/normal/$host$request_uri$boost_query.html ) { set $boost "${boost}F"; } if ($boost = GDQF){ rewrite ^.*$ /cache/normal/$host/$request_uri$boost_query.html break; } if (!-e $request_filename) { rewrite ^/(.*)$ /index.php?q=$1 last; break; } } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/html/subdomain/subdomain1.website.com$fastcgi_script_name; include fastcgi_params; } } I adding all subdomain rules manually from time to time. The size of ngin.conf has become too big. So, I need one nginx rules which do: subdomain1.website.com pointing to /var/www/html/subdomain/subdomain1.website.com subdomain2.website.com pointing to /var/www/html/subdomain/subdomain2.website.com subdomain3.website.com pointing to /var/www/html/subdomain/subdomain3.website.com ...and so on (So that no more adding rules for subdomain .website.com I need in the future.)

  Read the article

• What is the correct way to setup my virtual hosts in Apache to serve 2 differnt domains?

  - by Michael

  I have a current website on an Apache server (foo.com) and I want the same server to serve a new site (bar.com), is this the correct way to setup my virtual hosts? <VirtualHost *:80 ServerName foo.com ServerAlias www.foo.com Include conf.d/foo.conf </VirtualHost <VirtualHost *:80 ServerName bar.com ServerAlias www.bar.com Include conf.d/bar.conf </VirtualHost I'm hesitant to do an /etc/init.d/httpd reload without someone double checking! :)

  Read the article

• How to restrict Apache Location directive to cetain sub-domain?

  - by ohho

  On our server www.example.com, we use the <Location> directive to proxy traffic to a back-end server: <Location /app1> ProxyPass http://192.168.1.20 </Location> Then we added a sub-domain uat.example.com which points to the same IP address of www.example.com. We want to use it as a proxy for client to test an app being developed. Hopefully, the client can access via: http:/uat.example.com/app2_uat Now if we add a Location: <Location /app2_uat> ProxyPass http://192.168.1.30 </Location> The client can access both: http:/www.example.com/app2_uat http:/uat.example.com/app2_uat How can I restrict Location such that only: http:/uat.example.com/app2_uat is accessible? (i.e. http:/www.example.com/app2_uat should not be accessible.)

  Read the article

• Change smtp name

  - by Misterb

  Hello, My question is probably very easy to answer but I have been struggling with this the whole day. Actually, I would like to change my smtp.mail name and account that is shown as sending the emails in the header. I changed the "From" but it shows only in the "visible" part of the email and there are values that are different in the header. In this example : Received-SPF: pass (google.com: domain of bounce@taggedmail.com designates 67.221.174.127 as permitted sender) client-ip=67.221.174.127; Authentication-Results: mx.google.com; spf=pass (google.com: domain of bounce@taggedmail.com designates 67.221.174.127 as permitted sender) [email protected]; dkim=pass (test mode) header.i=tagged@taggedmail.com smtp.mail=bounce@taggedmail.com account=bounce Thank you in advance!

  Read the article

• Web Server Scripting Hack to Maintain State and Keep a Domain Cookieless

  - by jasonspalace

  Hello, I am looking for a solution on a LAMP server to keep a site cookieless such as "example.com", where static content is served from "static.example.com", and with rules in place to rewrite requests for "www.example.com" to "example.com". I am really hoping to avoid setting up a cookieless domain for the static content due to an unanswered SEO concern with regards to CNAMEing to a CDN. Is there a way, (or safe hack), that can be implemented where a second domain such as "www.example2.com" is CNAMEd, aliased, or otherwise used with "example.com" to somehow trick a php application into maintaining state with a cookie dropped on "www.example2.com" therefore keeping all of "example.com" cookieless? If such a solution is feasible, what implications would exists with regards to SSL and cross-browser compatibility other than requiring users to accept cookies from 3rd party domains and possibly needing an additional SSL to keep the cookie secure? Thanks in advance to all.

  Read the article

• Problem configuring virtual host.

  - by Zeeshan Rang

  I am tring to configure apache virtual host for my computer. But i am facing problem in doing so. i have made required changes in my C:\WINDOWS\system32\drivers\etc\hosts then C:\xampp\apache\conf\extra\httpd-vhosts.conf I added the following lines in httpd-vhosts.conf ########################Virtual Hosts Config below################## NameVirtualHost 127.0.0.1 <VirtualHost localhost> ServerName localhost DocumentRoot "C:\xampp\htdocs" DirectoryIndex index.php index.html <Directory "C:\xampp\htdocs"> AllowOverride All </Directory> </VirtualHost> <VirtualHost virtual.cloudse7en.com> ServerName virtual.cloudse7en.com DocumentRoot "C:\development\virtual.cloudse7en.com\httpdocs" DirectoryIndex index.php index.html <Directory "C:\development\virtual.cloudse7en.com\httpdocs"> Options Indexes FollowSymLinks Includes ExecCGI AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> <VirtualHost virtual.app.cloudse7en.com> ServerName virtual.app.cloudse7en.com DocumentRoot "C:\development\virtual.app.cloudse7en.com\httpdocs" DirectoryIndex index.php index.html <Directory "C:\development\virtual.app.cloudse7en.com\httpdocs"> Options Indexes FollowSymLinks Includes ExecCGI AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> ######################################################################## I started my xampp and tried http://localhost in a browser. This works and open up http://localhost/xampp/ but when i try http:http://virtual.app.cloudse7en.com it again opens up http://virtual.app.cloudse7en.com/xampp/ I do not understand the reason. Also i have a windows vista 64 bit, operating system. Do i need to make some other changes too? Regards Zee

  Read the article

• Issue with CNAME and Virtual Hosts

  - by mrc0der

  I'm using Apache and I have a CNAME DNS record for sub2.sub1.domain1.com that points to sub1.domain1.com And I have an A DNS record for sub1.domain1.com that points to the IP. Then in my httpd.conf file I have: <VirtualHost *:80> ServerName www.domain1.com DocumentRoot /domain1/www </VirtualHost> <VirtualHost *:80> ServerName sub1.domain.com DocumentRoot /domain1/sub1/www </VirtualHost> Yet I appear to be missing something, as when you visit sub2.sub1.domain1.com, it shows you the page for domain1.com. When you visit the sub1.domain1.com, it shows the correct page for sub1.

  Read the article

• Nginx with Passenger setup problems

  - by Kreeki

  I'm trying to setup nginx webserver with Passenger support for Ruby on Rails application on Ubuntu 10.04 (on sub URI). All went fine until I tried to access the server/application from the browser. My instalation of nginx is in location /opt/nginx # my nginx.conf server { listen 80; server_name www.mydomain.com; root /websites/site/public; passenger_enabled on; passenger_base_uri /site; location / { # added by default, I don't know if its supposed to be here or not root html; index index.html index.htm; } Then I started the server. But when I put www.mydomain.com/site in browser I get 404 Not Found error. Error.log shows this: 2011/03/04 10:07:07 [error] 21387#0: *2 open() "/opt/nginx/html/favicon.ico" failed (2: No such file or directory), client: 90.182.7.150, server: www.mydomain.com, request: "GET /favicon.ico HTTP/1.1", host: "80.79.23.71", referrer: "http://80.79.23.71/" 2011/03/04 10:07:07 [error] 21387#0: *2 open() "/opt/nginx/html/404.html" failed (2: No such file or directory), client: 90.182.7.150, server: www.mydomain.com, request: "GET /favicon.ico HTTP/1.1", host: "80.79.23.71", referrer: "http://80.79.23.71/" 2011/03/04 10:07:11 [error] 21387#0: *4 open() "/opt/nginx/html/favicon.ico" failed (2: No such file or directory), client: 90.182.7.150, server: www.mydomain.com, request: "GET /favicon.ico HTTP/1.1", host: "80.79.23.71:80", referrer: "http://80.79.23.71:80/" 2011/03/04 10:07:11 [error] 21387#0: *4 open() "/opt/nginx/html/404.html" failed (2: No such file or directory), client: 90.182.7.150, server: www.mydomain.com, request: "GET /favicon.ico HTTP/1.1", host: "80.79.23.71:80", referrer: "http://80.79.23.71:80/" 2011/03/04 10:07:13 [error] 21387#0: *5 open() "/opt/nginx/html/site" failed (2: No such file or directory), client: 90.182.7.150, server: www.mydomain.com, request: "GET /site HTTP/1.1", host: "80.79.23.71:80" 2011/03/04 10:07:13 [error] 21387#0: *5 open() "/opt/nginx/html/404.html" failed (2: No such file or directory), client: 90.182.7.150, server: www.mydomain.com, request: "GET /site HTTP/1.1", host: "80.79.23.71:80" 2011/03/04 10:07:15 [error] 21387#0: *6 open() "/opt/nginx/html/site" failed (2: No such file or directory), client: 90.182.7.150, server: www.mydomain.com, request: "GET /site HTTP/1.1", host: "80.79.23.71:80" 2011/03/04 10:07:15 [error] 21387#0: *6 open() "/opt/nginx/html/404.html" failed (2: No such file or directory), client: 90.182.7.150, server: www.mydomain.com, request: "GET /site HTTP/1.1", host: "80.79.23.71:80" 2011/03/04 10:07:19 [error] 21387#0: *7 open() "/opt/nginx/html/site" failed (2: No such file or directory), client: 90.182.7.150, server: www.mydomain.com, request: "GET /site HTTP/1.1", host: "80.79.23.71:80" 2011/03/04 10:07:19 [error] 21387#0: *7 open() "/opt/nginx/html/404.html" failed (2: No such file or directory), client: 90.182.7.150, server: www.mydomain.com, request: "GET /site HTTP/1.1", host: "80.79.23.71:80" Why does nginx look for site in /opt/nginx/html/site as log shows when there's another path set in nginx.conf? Any idea whats wrong with my setup?

  Read the article

• MS Server 2008 R2: DNS Redirection on second server for website

  - by Alain

  We have a website on a secondary server that we want this website to be accessible from Internet, with www.mywebsite.com. In the domain name provider of www.mywebsite.com, we set our 2 dns names, dns1.company.ch, dns2.company.ch and our static ip address. System is set as following: MS Server 2008 R2 N°1: Main server, in AD With IP 192.168.1.100 With DNS zone dns1.company.ch With DNS secondary zone from server N°2: dns2.company.ch With DNS secondary zone from server N°2: mywebsite.com (zone transfer is on) MS Server 2008 R2 N°2: Secondary server, not in AD With IP 192.168.1.101 With DNS zone dns2.company.ch With DNS zone mywebsite.com with host: 192.168.1.101 With the website under ISS with bindings www.mywebsite.com:80, mywebsite.com:80 All traffics for ports 80 (http) and 53 (dns) from Internet goes to server N°1. How can we redirect all traffics for www.mywebsite.com from Internet to our secondary server so the corresponding website can be displayed in Internet ? Note: Under DNS of server N°1, we tried to use also a conditional redirector mywebsite.com (192.168.0.101), but it was working only for intranet. Thank you, Alain

  Read the article

• Email sent from server with rDNS & SPF being blocked by Hotmail

  - by Canadaka

  I have been unable to send email to users on hotmail or other Microsoft email servers for some time. Its been a major headache trying to find out why and how to fix the issue. The emails being sent that are blocked from my domain canadaka.net. I use Google Aps to host my regular email serverice for my @canadaka.net email addresses. I can sent email from my desktop or gmail to a hotmail without any problem. But any email sent from my server on behalf of canadaka.net is blocked, not even arriving in the junk email. The IP that the emails are being sent from is the same IP that my site is hosted on: 66.199.162.177 This IP is new to me since August 2010, I had a different IP for the previous 3-4 years. This IP is not on any credible spam lists http://www.anti-abuse.org/multi-rbl-check-results/?host=66.199.162.177 The one list spamcannibal.org my IP is listed on seems to be out of my control, says "no reverse DNS, MX host should have rDNS - RFC1912 2.1". But since I use Google for my email hosting, I don't have control over setting up RDNS for all the MX records. I do have Reverse DNS setup for my IP though, it resolves to "mail.canadaka.net". I have signed up for SNDS and was approved. My ip says "All of the specified IPs have normal status." Sender Score: 100 https://www.senderscore.org/lookup.php?lookup=66.199.162.177&ipLookup.x=55&ipLookup.y=14 My Mcafee threat level seems fine I have a TXT SPF record setup, I am currently using xname.org as my DNS, and they don't have a field for SPF, but their FAQ says to add the SPF info as a TXT entry. v=spf1 a include:_spf.google.com ~all Some "SPF checking" tools ive used detect that my domain has a valid SPF, but others don't. Like Microsoft's SPF wizard, i think this is because its specifically looking for an SPF record and not in the TXT. "No SPF Record Found. A and MX Records Available". From my home I can run "nslookup -type=TXT canadaka.net" and it returns: Server: google-public-dns-a.google.com Address: 8.8.8.8 Non-authoritative answer: canadaka.net text = "v=spf1 a include:_spf.google.com ~all" One strange thing I found is i'm unable to ping hotmail.com or msn.com or do a "telnet mail.hotmail.com 25". I am able to ping gmail.com and many other domains I tried. I tried changing my DNS servers to Google's Public DNS and did a ipconfig /flushdns but that had no effect. I am however able to connect with telnet to mx1.hotmail.com This is what the email headers look like when I send to a Google email server and I receive the email with no troubles. You can see that SPF is passing. Delivered-To: [email protected] Received: by 10.146.168.12 with SMTP id q12cs91243yae; Sun, 27 Feb 2011 18:01:49 -0800 (PST) Received: by 10.43.48.7 with SMTP id uu7mr4292541icb.68.1298858509242; Sun, 27 Feb 2011 18:01:49 -0800 (PST) Return-Path: Received: from canadaka.net ([66.199.162.177]) by mx.google.com with ESMTP id uh9si8493137icb.127.2011.02.27.18.01.45; Sun, 27 Feb 2011 18:01:48 -0800 (PST) Received-SPF: pass (google.com: domain of [email protected] designates 66.199.162.177 as permitted sender) client-ip=66.199.162.177; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 66.199.162.177 as permitted sender) [email protected] Message-Id: <[email protected].com Received: from coruscant ([127.0.0.1]:12907) by canadaka.net with [XMail 1.27 ESMTP Server] id for from ; Sun, 27 Feb 2011 18:01:29 -0800 Date: Sun, 27 Feb 2011 18:01:29 -0800 Subject: Test To: [email protected] From: XXXX Reply-To: [email protected] X-Mailer: PHP/5.2.13 I can send to gmail and other email services fine. I don't know what i'm doing wrong! UPDATE 1 I have been removed from hotmails IP block and am now able to send emails to hotmail, but they are all going directly to the JUNK folder. UPDATE 2 I used Telnet to send a test message to port25.com, seems my SPF is not being detected. Result: neutral (SPF-Result: None) canadaka.net. SPF (no records) canadaka.net. TXT (no records) I do have a TXT record, its been there for years, I did change it a week ago. Other sites that allow you to check your SPF detect it, but some others like Microsofts Wizard doesn't. This iw what my SPF record in my xname.org DNS file looks like: canadaka.net. 86400 IN TXT "v=spf1 a include:_spf.google.com ~all" I did have a nameserver as my 4th option that doens't have the TXT records since it doens't support it. So I removed it from the list and instead added wtfdns.com as my 4th adn 5th nameservers, which does support TXT.

  Read the article

• Is there a method to instantly, dynamically switch between several sets of name servers on a single domain with code?

  - by trnsfrmr

  I usually set name servers at an ISP, they often take 24 - 48 hours to resolve. If one has 2 separate sets of name servers (say from 2 domain parking companies) they want to send traffic to, is it possible to switch between the sets instantly without any delays? To be clear, how do you switch mydomain.com (ns1.nameserver1.com, ns2.nameserver1.com) to mydomain.com (ns1.nameserver2.com, ns2.nameserver2.com) instantly?

  Read the article

• Installing Glassfish 3.1 on Ubuntu 10.10 Server

  - by andand

  I've used the directions here to successfully install Glassfish 3.0.1 on an virtualized (VirtualBox and VMWare) Ubuntu 10.10 Server instance without any real difficulty not resolved by more closely following the directions. However when I try applying them to Glassfish 3.1, I seem to keep getting stuck at section 6. "Security configuration before first startup". In particular, there are some differences I noted: 1) There are two keys in the default keystore. The 's1as' key is still there, but another named 'glassfish-instance' is also there. When I saw this, I deleted and recreated them both along with a 'myAlias' key which I was going to use where needed. 2) When turning the security on it seems like part of the server thinks it's on, but others don't. For instances: $ /home/glassfish/bin/asadmin set server-config.network-config.protocols.protocol.admin-listener.security-enabled=true server-config.network-config.protocols.protocol.admin-listener.security-enabled=true Command set executed successfully. $ /home/glassfish/bin/asadmin get server-config.network-config.protocols.protocol.admin-listener.security-enabled server-config.network-config.protocols.protocol.admin-listener.security-enabled=true Command get executed successfully. $ /home/glassfish/bin/asadmin --secure list-jvm-options It appears that server [localhost:4848] does not accept secure connections. Retry with --secure=false. javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake Command list-jvm-options failed. $ /home/glassfish/bin/asadmin --secure=false list-jvm-options -XX:MaxPermSize=192m -client -Djavax.management.builder.initial=com.sun.enterprise.v3.admin.AppServerMBeanServerBuilder -XX: UnlockDiagnosticVMOptions -Djava.endorsed.dirs=${com.sun.aas.installRoot}/modules/endorsed${path.separator}${com.sun.aas.installRoot}/lib/endorsed -Djava.security.policy=${com.sun.aas.instanceRoot}/config/server.policy -Djava.security.auth.login.config=${com.sun.aas.instanceRoot}/config/login.conf -Dcom.sun.enterprise.security.httpsOutboundKeyAlias=s1as -Xmx512m -Djavax.net.ssl.keyStore=${com.sun.aas.instanceRoot}/config/keystore.jks -Djavax.net.ssl.trustStore=${com.sun.aas.instanceRoot}/config/cacerts.jks -Djava.ext.dirs=${com.sun.aas.javaRoot}/lib/ext${path.separator}${com.sun.aas.javaRoot}/jre/lib/ext${path.separator}${com.sun.aas.in stanceRoot}/lib/ext -Djdbc.drivers=org.apache.derby.jdbc.ClientDriver -DANTLR_USE_DIRECT_CLASS_LOADING=true -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory -Dorg.glassfish.additionalOSGiBundlesToStart=org.apache.felix.shell,org.apache.felix.gogo.runtime,org.apache.felix.gogo.shell,org.apache.felix.gogo.command -Dosgi.shell.telnet.port=6666 -Dosgi.shell.telnet.maxconn=1 -Dosgi.shell.telnet.ip=127.0.0.1 -Dgosh.args=--nointeractive -Dfelix.fileinstall.dir=${com.sun.aas.installRoot}/modules/autostart/ -Dfelix.fileinstall.poll=5000 -Dfelix.fileinstall.log.level=2 -Dfelix.fileinstall.bundles.new.start=true -Dfelix.fileinstall.bundles.startTransient=true -Dfelix.fileinstall.disableConfigSave=false -XX:NewRatio=2 Command list-jvm-options executed successfully. Also the admin console responds only to http (not https) requests. Thoughts?

  Read the article

• Mac OS X Server 10.6.6 DNS not responding properly, get a "Truncated, retrying in TCP mode" for subdomain

  - by Eric Arseneau

  If I do an nslookup on youtube.com, no problem, if I do one with www.youtube.com, failure. See details below. [~] nslookup youtube.com Server: 192.168.1.1 Address: 192.168.1.1#53 Non-authoritative answer: Name: youtube.com Address: 74.125.127.93 Name: youtube.com Address: 74.125.47.93 Name: youtube.com Address: 74.125.95.93 [~] nslookup www.youtube.com ;; Truncated, retrying in TCP mode. ;; Connection to 192.168.1.1#53(192.168.1.1) for www.youtube.com failed: connection refused. If I do the same from a Windows machine its fine, its when I do it from a Mac workstation that I get the issue. I have rebooted, both server and workstation, I did a changeip, but nothing is working. Any recommendations?

  Read the article

• Persuading openldap to work with SSL on Ubuntu with cn=config

  - by Roger

  I simply cannot get this (TLS connection to openldap) to work and would appreciate some assistance. I have a working openldap server on ubuntu 10.04 LTS, it is configured to use cn=config and most of the info I can find for TLS seems to use the older slapd.conf file :-( I've been largely following the instructions here https://help.ubuntu.com/10.04/serverguide/C/openldap-server.html plus stuff I've read here and elsewhere - which of course could be part of the problem as I don't totally understand all of this yet! I have created an ssl.ldif file as follows; dn:cn=config add: olcTLSCipherSuite olcTLSCipherSuite: TLSV1+RSA:!NULL add: olcTLSCRLCheck olcTLSCRLCheck: none add: olcTLSVerifyClient olcTLSVerifyClient: never add: olcTLSCACertificateFile olcTLSCACertificateFile: /etc/ssl/certs/ldap_cacert.pem add: olcTLSCertificateFile olcTLSCertificateFile: /etc/ssl/certs/my.domain.com_slapd_cert.pem add: olcTLSCertificateKeyFile olcTLSCertificateKeyFile: /etc/ssl/private/my.domain.com_slapd_key.pem and I import it using the following command line ldapmodify -x -D cn=admin,dc=mydomain,dc=com -W -f ssl.ldif I have edited /etc/default/slapd so that it has the following services line; SLAPD_SERVICES="ldap:/// ldapi:/// ldaps:///" And everytime I'm making a change, I'm restarting slapd with /etc/init.d/slapd restart The following command line to test out the non TLS connection works fine; ldapsearch -d 9 -D cn=admin,dc=mydomain,dc=com -w mypassword \ -b dc=mydomain,dc=com -H "ldap://mydomain.com" "cn=roger*" But when I switch to ldaps using this command line; ldapsearch -d 9 -D cn=admin,dc=mydomain,dc=com -w mypassword \ -b dc=mydomain,dc=com -H "ldaps://mydomain.com" "cn=roger*" This is what I get; ldap_url_parse_ext(ldaps://mydomain.com) ldap_create ldap_url_parse_ext(ldaps://mydomain.com:636/??base) ldap_sasl_bind ldap_send_initial_request ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP mydomain.com:636 ldap_new_socket: 3 ldap_prepare_socket: 3 ldap_connect_to_host: Trying 127.0.0.1:636 ldap_pvt_connect: fd: 3 tm: -1 async: 0 TLS: can't connect: A TLS packet with unexpected length was received.. ldap_err2string ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1) Now if I check netstat -al I can see; tcp 0 0 *:www *:* LISTEN tcp 0 0 *:ssh *:* LISTEN tcp 0 0 *:https *:* LISTEN tcp 0 0 *:ldaps *:* LISTEN tcp 0 0 *:ldap *:* LISTEN I'm not sure if this is significant as well ... I suspect it is; openssl s_client -connect mydomain.com:636 -showcerts CONNECTED(00000003) 916:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:188: I think I've made all my certificates etc OK and here are the results of some checks; If I do this; certtool -e --infile /etc/ssl/certs/ldap_cacert.pem I get Chain verification output: Verified. certtool -e --infile /etc/ssl/certs/mydomain.com_slapd_cert.pem Gives "certtool: the last certificate is not self signed" but it otherwise seems OK? Where have I gone wrong? Surely getting openldap to run securely on ubuntu should be easy and not require a degree in rocket science! Any ideas?

  Read the article

• Postfix on Snow Leopard unable to send MIME emails, including header contents in message body

  - by devvy

  I configured postfix on snow leopard by adding the following line to /etc/hostconfig: MAILSERVER=-YES- I then configured postfix to relay through my ISP's SMTP server. I added the following two lines in their respective places within /etc/postfix/main.cf: myhostname = 1and1.com relayhost = shawmail.vc.shawcable.net I then have a simple PHP mail function wrapper as follows: send_email("sender@mydomain.com", "recipient@mydomain.com", "Test Email", "<p>This is a simple HTML email</p>"); echo "Done"; function send_email($from,$to,$subject,$message){ $header="From: <".$from."> "; $header.= 'MIME-Version: 1.0' . " "; $header.= 'Content-type: text/html; charset=iso-8859-1' . " "; $send_mail=mail($to,$subject,$message,$header); if(!$send_mail){ echo "ERROR"; } } With this, I am receiving an e-mail that appears to be improperly formatted. The message header is showing up in the body of the e-mail. The raw message content is as follows: Return-Path: <[email protected]> Delivery-Date: Tue, 27 Apr 2010 18:12:48 -0400 Received: from idcmail-mo2no.shaw.ca (idcmail-mo2no.shaw.ca [64.59.134.9]) by mx.perfora.net (node=mxus2) with ESMTP (Nemesis) id 0M4XlU-1NCtC81GVY-00z5UN for [email protected]; Tue, 27 Apr 2010 18:12:48 -0400 Message-Id: <[email protected]> Received: from pd6ml3no-ssvc.prod.shaw.ca ([10.0.153.149]) by pd6mo1no-svcs.prod.shaw.ca with ESMTP; 27 Apr 2010 16:12:47 -0600 X-Cloudmark-SP-Filtered: true X-Cloudmark-SP-Result: v=1.0 c=1 a=VphdPIyG4kEA:10 a=hATtCjKilyj9ZF5m5A62ag==:17 a=mC_jT1gcAAAA:8 a=QLyc3QejAAAA:8 a=DGW4GvdtALggLTu6w9AA:9 a=KbDtEDGyCi7QHcNhDYYwsF92SU8A:4 a=uch7kV7NfGgA:10 a=5ZEL1eDBWGAA:10 Received: from unknown (HELO 1and1.com) ([24.84.196.104]) by pd6ml3no-dmz.prod.shaw.ca with ESMTP; 27 Apr 2010 16:12:48 -0600 Received: by 1and1.com (Postfix, from userid 70) id BB08D14ECFC; Tue, 27 Apr 2010 15:12:47 -0700 (PDT) To: recipient@domain.com Subject: Test Email X-PHP-Originating-Script: 501:test.php Date: Tue, 27 Apr 2010 18:12:48 -0400 X-UI-Junk: AutoMaybeJunk +30 (SPA); V01:LYI2BGRt:7TwGx5jxe8cylj5nOTae9JQXYqoWvG2w4ZSfwYCXmHCH/5vVNCE fRD7wNNM86txwLDTO522ZNxyNHhvJUK9d2buMQuAUCMoea2jJHaDdtRgkGxNSkO2 v6svm0LsZikLMqRErHtBCYEWIgxp2bl0W3oA3nIbtfp3li0kta27g/ZjoXcgz5Sw B8lEqWBqKWMSta1mCM+XD/RbWVsjr+LqTKg== Envelope-To: recipient@domain.com From: <[email protected]> MIME-Version: 1.0 Content-type: text/html; charset=iso-8859-1 Message-Id: <[email protected]> Date: Tue, 27 Apr 2010 15:12:47 -0700 (PDT) <p>This is a simple HTML email</p> And here are the contents of my /var/log/mail.log file after sending the email: Apr 27 15:29:01 User-iMac postfix/qmgr[705]: 74B1514EDDF: removed Apr 27 15:29:30 User-iMac postfix/pickup[704]: 25FBC14EDF0: uid=70 from=<_www> Apr 27 15:29:30 User-iMac postfix/master[758]: fatal: open lock file pid/master.pid: unable to set exclusive lock: Resource temporarily unavailable Apr 27 15:29:30 User-iMac postfix/cleanup[745]: 25FBC14EDF0: message-id=<[email protected]> Apr 27 15:29:30 User-iMac postfix/qmgr[705]: 25FBC14EDF0: from=<[email protected]>, size=423, nrcpt=1 (queue active) Apr 27 15:29:30 User-iMac postfix/smtp[747]: 25FBC14EDF0: to=<[email protected]>, relay=shawmail.vc.shawcable.net[64.59.128.135]:25, delay=0.21, delays=0.01/0/0.1/0.1, dsn=2.0.0, status=sent (250 ok: Message 25784419 accepted) Apr 27 15:29:30 User-iMac postfix/qmgr[705]: 25FBC14EDF0: removed Two other people in the office have followed the exact same process and are running the exact same script, version of snow leopard, php, etc. and everything is working fine for them. I've even copied their config files to my machine, restarted postfix, restarted apache, all to no avail. Does anyone know what steps I could take to resolve the issue? This is boggling my mind... Thanks

  Read the article

• Can SPF records contain domain name wildcards?

  - by deltanovember

  Part of my SPF record contains: include:google.com I'm still getting soft fail because the actual e-mail is delivered by the following Received: from mail-yx0-f172.google.com (mail-yx0-f172.google.com [209.85.213.172] Which has a completely different IP from google.com. However I don't want to put in mail-yx0-f172.google.com because it might be dynamic. Is there some equivalent of *.google.com that I can use in the record

  Read the article

• In DNS can an IN NS point to a CNAME?

  - by Mark Wagner

  Is it allowed to have an NS record be a CNAME? E.g.: subdomain.example.com. IN NS ns1.example.com. ns1.example.com. CNAME foo.example.com. foo.example.com. IN A 10.1.1.1 This doesn't seem to work in bind though this (of course) does: subdomain.example.com. IN NS foo.example.com. foo.example.com. IN A 10.1.1.1 Any pointers to RFCs prohibiting this setup would be appreciated.

  Read the article

< Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >