device admin - Page 126

iPhone rotation on demand

- by yosh

Is there a way to manually check current position of device AND ask device to automatically rotate it without waiting for user to actually rotate the device? Currently I control the rotation with several IFs in -shouldAutorotateToInterfaceOrientation but in few situations I have to stop the view from rotating and enable it again and I don't want user to rotate the device twice to have the desired orientation.

Read the article

Apache Virtual Host with directory aliases

- by brechtvhb

Hi, I'm trying to set up a dynamic virtual host in apache with a directory alias pointing to a difirent path for every domain. Here's what I'm trying to achive. Say I have 2 domains: * www.domain1.com * www.domein2.com I want both to point to the same index.php file (C:/cms/index.php). Now the hard part ... I want directories or certain file types to point to a diffirent path for each domain. Example: * www.domain1.com/layout -> C:/store/www.domain1.com/layout * www.domain2.com/layout -> C:/store/www.domain2.com/layout * www.domain1.com/image.png -> C:/store/www.domain1.com/image.png * www.domain2.com/image.png -> C:/store/www.domain2.com/image.png However the admin directory should point to the same path again for all sites * www.domain1.com/admin -> C:/cms/admin * www.domain2.com/admin -> C:/cms/admin Is there a way to achieve this kind of behaviour in apache 2.2 without having to create a virtualhost entry for each new domain?

Read the article

How to Set Ubuntu 12.04 to it's factory settings like when u first installed it?

- by Cameron

Well, this is a simple answered question, from the title, but my real problem is hard af. I have set ubuntu to use root, then it wouldn't let me log into the admin account only root and guest I deleted the admin account, remade another, then attempted to disable root account. This failed - I messed up the password, the original password was "root" I also didn't set a password for my new admin account, so It says it has one, whats the default password for it? I can't moderate my ubuntu system at all now. I have tried to drop to cmd shell thing, it asks for the root password, i type 'root' and any other possible passwords, it doesn't work. To reset ubuntu to factory settings i have found that i could enter the following code: sudo dpkg-reconfigure -phigh -a sudo Requires admin password, that I cant find out without root password and I don;t know. My goal is to try to fix this without remaking a bootable usb for ubuntu, because I lost the one i made for this. so If i can't, please say so. If you can help thanks!

Read the article

How do you determine whether a website is a scam [closed]

- by Tom

What's the best way to determine if a website is a scam. For example, at first sight (no pun intended) the following website seems to be legitimate. But the price of the product is suspiciously low (all the reviews point to an RRP of approximately £1000). http://www.maxiargos.com/index.php/asus-zenbook-ux31e-dh72-13-3-inch-thin-and-light-ultrabook-silver-aluminum.html Another indication is the lack of SSL for the checkout page, and lack of useful information in the WHOIS record. Registration Service Provided By: TMDHOSTING Contact: +1.8665325635 Domain Name: MAXIARGOS.COM Registrant: PrivacyProtect.org Domain Admin ([email protected]) ID#10760, PO Box 16 Note - All Postal Mails Rejected, visit Privacyprotect.org Nobby Beach null,QLD 4218 AU Tel. +45.36946676 Creation Date: 09-Nov-2011 Expiration Date: 09-Nov-2012 Domain servers in listed order: ns1.tmdhosting410.com ns2.tmdhosting410.com Administrative Contact: PrivacyProtect.org Domain Admin ([email protected]) ID#10760, PO Box 16 Note - All Postal Mails Rejected, visit Privacyprotect.org Nobby Beach null,QLD 4218 AU Tel. +45.36946676 Technical Contact: PrivacyProtect.org Domain Admin ([email protected]) ID#10760, PO Box 16 Note - All Postal Mails Rejected, visit Privacyprotect.org Nobby Beach null,QLD 4218 AU Tel. +45.36946676 Billing Contact: PrivacyProtect.org Domain Admin ([email protected]) ID#10760, PO Box 16 Note - All Postal Mails Rejected, visit Privacyprotect.org Nobby Beach null,QLD 4218 AU Tel. +45.36946676

Read the article

In an online questionnaire, what is a best way to design a database for keeping track of users all attempts?

- by user1990525

We have a web app where users can take online exams. Exam admin will create a questionnaire. A questionnaire can have many Questions. Each question is a multiple choice question (MCQ). Lets say an admin creates a questionnaire with 10 questions. Users attempt those questions. Now, unlike real exams users can attempt single questionnaire multiple times. And we have to keep track of his all attempts. e.g. User_id Questionnaire_id question_id answer attempt_date attempt_no 1 1 1 a 1 June 2013 1 1 1 2 b 1 June 2013 1 1 1 1 c 2 June 2013 2 1 1 2 d 2 June 2013 2 Now it can also happen that after user has attempted same questionnare twice, admin can delete a question from same questionnaire, but users attempt history should still have reference to that so that user can see his that question in his attempt history in spite of admin deleting that question. If user now attempts this changed questionnaire he should see only 1 question. User_id Questionnaire_id question_id answer attempt_date attempt_no 1 1 1 a 3 June 2013 3 Also, after this user modified some part of question, users attempt history should show question before modification while any new attempt should show modified question. How do we manage this at the database level? My first gut feeling was that, For deletes, do not do physical delete, just make a question inactive so that history can still keep track of users attempt. For modifications, create versions for questions and each new attempt refres to latest version of each question and history keeping reference to version of question at attempt time.

Read the article

Password not working for sudo ("Authentication failure")

- by Souta

Before I mention anything further, DO NOT give me a response saying that terminal won't show password input. I'm AWARE of that. I'm typing my user password in (not a capslock issue), and for some reason it still says 'Authentication Failure'. Is there some other password (one I'm not aware of) I'm supposed to be using other than my user password? I've had this ubuntu before, on another hard drive and I didn't have this problem. (And it was the same ubuntu, ubuntu 12.04 LTS) ai@AiNekoYokai:~$ groups ai adm cdrom sudo dip plugdev lpadmin sambashare ai@AiNekoYokai:~$ lsb_release -rd Description: Ubuntu 12.04 LTS Release: 12.04 ai@AiNekoYokai:~$ pkexec cat /etc/sudoers # # This file MUST be edited with the 'visudo' command as root. # # Please consider adding local content in /etc/sudoers.d/ instead of # directly modifying this file. # # See the man page for details on how to write a sudoers file. # Defaults env_reset Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" # Host alias specification # User alias specification # Cmnd alias specification # User privilege specification root ALL=(ALL:ALL) ALL # Members of the admin group may gain root privileges %admin ALL=(ALL) ALL # Allow members of group sudo to execute any command %sudo ALL=(ALL:ALL) ALL # See sudoers(5) for more information on "#include" directives: #includedir /etc/sudoers.d I can log in with my password, but it's not accepted as valid for authentication <-- That is pretty much my issue. (Although, I haven't gone into recovery mode.) I've ran: ai@AiNekoYokai:~$ ls /etc/sudoers.d README And also reinstalled sudo with: pkexec apt-get update pkexec apt-get --purge --reinstall install sudo pkexec usermod -a -G admin $USER <- Says admin does not exist su $USER <- worked for me, however, my password still does not do much (in sense of not working for other things) I changed my password with pkexec passwd $USER. I was able to change it no problem. gksudo xclock was something I was able to get into, no problem. (Clock showed) ai@AiNekoYokai:~$ gksudo xclock

Read the article

What is the best approach for deploying apps to companies

- by Supercell

What is the best approach for the following scenario: 1) A publicly available app (available in app stores) which is used by end users to make use of services offered by multiple companies. 2) These companies maintain their services also using a mobile app. I'm not sure on how to solve the second part. Having one app for both enduser and admin functionality, secured by username/password doesn't sound like a good idea. This would leave the only option of developing a separate admin application for the companies. What is the best approach to deploy "admin" like mobile apps to companies only, for Android, iOS and Windows Phone? Some additional information: Public App ---- Servers ----- Multiple Company Apps The public app shows all companies offering their services. An end user uses the public app to order something from a specific company. The order is sent to our servers. Our servers send the order to the associated company. This order is displayed on the company's admin app and given the option to accept the order.

Read the article

WPF unity Activation error occured while trying to get instance of type

- by Traci

I am getting the following error when trying to Initialise the Module using Unity and Prism. The DLL is found by return new DirectoryModuleCatalog() { ModulePath = @".\Modules" }; The dll is found and the Name is Found #region Constructors public AdminModule( IUnityContainer container, IScreenFactoryRegistry screenFactoryRegistry, IEventAggregator eventAggregator, IBusyService busyService ) : base(container, screenFactoryRegistry) { this.EventAggregator = eventAggregator; this.BusyService = busyService; } #endregion #region Properties protected IEventAggregator EventAggregator { get; set; } protected IBusyService BusyService { get; set; } #endregion public override void Initialize() { base.Initialize(); } #region Register Screen Factories protected override void RegisterScreenFactories() { this.ScreenFactoryRegistry.Register(ScreenKeyType.ApplicationAdmin, typeof(AdminScreenFactory)); } #endregion #region Register Views and Various Services protected override void RegisterViewsAndServices() { //View Models this.Container.RegisterType<IAdminViewModel, AdminViewModel>(); } #endregion the code that produces the error is: namespace Microsoft.Practices.Composite.Modularity protected virtual IModule CreateModule(string typeName) { Type moduleType = Type.GetType(typeName); if (moduleType == null) { throw new ModuleInitializeException(string.Format(CultureInfo.CurrentCulture, Properties.Resources.FailedToGetType, typeName)); } return (IModule)this.serviceLocator.GetInstance(moduleType); <-- Error Here } Can Anyone Help Me Error Log Below: General Information Additional Info: ExceptionManager.MachineName: xxxxx ExceptionManager.TimeStamp: 22/02/2010 10:16:55 AM ExceptionManager.FullName: Microsoft.ApplicationBlocks.ExceptionManagement, Version=1.0.3591.32238, Culture=neutral, PublicKeyToken=null ExceptionManager.AppDomainName: Infinity.vshost.exe ExceptionManager.ThreadIdentity: ExceptionManager.WindowsIdentity: xxxxx 1) Exception Information Exception Type: Microsoft.Practices.Composite.Modularity.ModuleInitializeException ModuleName: AdminModule Message: An exception occurred while initializing module 'AdminModule'. - The exception message was: Activation error occured while trying to get instance of type AdminModule, key "" Check the InnerException property of the exception for more information. If the exception occurred while creating an object in a DI container, you can exception.GetRootException() to help locate the root cause of the problem. Data: System.Collections.ListDictionaryInternal TargetSite: Void HandleModuleInitializationError(Microsoft.Practices.Composite.Modularity.ModuleInfo, System.String, System.Exception) HelpLink: NULL Source: Microsoft.Practices.Composite StackTrace Information at Microsoft.Practices.Composite.Modularity.ModuleInitializer.HandleModuleInitializationError(ModuleInfo moduleInfo, String assemblyName, Exception exception) at Microsoft.Practices.Composite.Modularity.ModuleInitializer.Initialize(ModuleInfo moduleInfo) at Microsoft.Practices.Composite.Modularity.ModuleManager.InitializeModule(ModuleInfo moduleInfo) at Microsoft.Practices.Composite.Modularity.ModuleManager.LoadModulesThatAreReadyForLoad() at Microsoft.Practices.Composite.Modularity.ModuleManager.OnModuleTypeLoaded(ModuleInfo typeLoadedModuleInfo, Exception error) at Microsoft.Practices.Composite.Modularity.FileModuleTypeLoader.BeginLoadModuleType(ModuleInfo moduleInfo, ModuleTypeLoadedCallback callback) at Microsoft.Practices.Composite.Modularity.ModuleManager.BeginRetrievingModule(ModuleInfo moduleInfo) at Microsoft.Practices.Composite.Modularity.ModuleManager.LoadModuleTypes(IEnumerable`1 moduleInfos) at Microsoft.Practices.Composite.Modularity.ModuleManager.LoadModulesWhenAvailable() at Microsoft.Practices.Composite.Modularity.ModuleManager.Run() at Microsoft.Practices.Composite.UnityExtensions.UnityBootstrapper.InitializeModules() at Infinity.Bootstrapper.InitializeModules() in D:\Projects\dotNet\Infinity\source\Inifinty\Infinity\Application Modules\BootStrapper.cs:line 75 at Microsoft.Practices.Composite.UnityExtensions.UnityBootstrapper.Run(Boolean runWithDefaultConfiguration) at Microsoft.Practices.Composite.UnityExtensions.UnityBootstrapper.Run() at Infinity.App.Application_Startup(Object sender, StartupEventArgs e) in D:\Projects\dotNet\Infinity\source\Inifinty\Infinity\App.xaml.cs:line 37 at System.Windows.Application.OnStartup(StartupEventArgs e) at System.Windows.Application.<.ctorb__0(Object unused) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter) at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler) 2) Exception Information Exception Type: Microsoft.Practices.ServiceLocation.ActivationException Message: Activation error occured while trying to get instance of type AdminModule, key "" Data: System.Collections.ListDictionaryInternal TargetSite: System.Object GetInstance(System.Type, System.String) HelpLink: NULL Source: Microsoft.Practices.ServiceLocation StackTrace Information at Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance(Type serviceType, String key) at Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance(Type serviceType) at Microsoft.Practices.Composite.Modularity.ModuleInitializer.CreateModule(String typeName) at Microsoft.Practices.Composite.Modularity.ModuleInitializer.Initialize(ModuleInfo moduleInfo) 3) Exception Information Exception Type: Microsoft.Practices.Unity.ResolutionFailedException TypeRequested: AdminModule NameRequested: NULL Message: Resolution of the dependency failed, type = "Infinity.Modules.Admin.AdminModule", name = "". Exception message is: The current build operation (build key Build Key[Infinity.Modules.Admin.AdminModule, null]) failed: The parameter screenFactoryRegistry could not be resolved when attempting to call constructor Infinity.Modules.Admin.AdminModule(Microsoft.Practices.Unity.IUnityContainer container, PhoenixIT.IScreenFactoryRegistry screenFactoryRegistry, Microsoft.Practices.Composite.Events.IEventAggregator eventAggregator, PhoenixIT.IBusyService busyService). (Strategy type BuildPlanStrategy, index 3) Data: System.Collections.ListDictionaryInternal TargetSite: System.Object DoBuildUp(System.Type, System.Object, System.String) HelpLink: NULL Source: Microsoft.Practices.Unity StackTrace Information at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name) at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, String name) at Microsoft.Practices.Unity.UnityContainer.Resolve(Type t, String name) at Microsoft.Practices.Composite.UnityExtensions.UnityServiceLocatorAdapter.DoGetInstance(Type serviceType, String key) at Microsoft.Practices.ServiceLocation.ServiceLocatorImplBase.GetInstance(Type serviceType, String key) 4) Exception Information Exception Type: Microsoft.Practices.ObjectBuilder2.BuildFailedException ExecutingStrategyTypeName: BuildPlanStrategy ExecutingStrategyIndex: 3 BuildKey: Build Key[Infinity.Modules.Admin.AdminModule, null] Message: The current build operation (build key Build Key[Infinity.Modules.Admin.AdminModule, null]) failed: The parameter screenFactoryRegistry could not be resolved when attempting to call constructor Infinity.Modules.Admin.AdminModule(Microsoft.Practices.Unity.IUnityContainer container, PhoenixIT.IScreenFactoryRegistry screenFactoryRegistry, Microsoft.Practices.Composite.Events.IEventAggregator eventAggregator, PhoenixIT.IBusyService busyService). (Strategy type BuildPlanStrategy, index 3) Data: System.Collections.ListDictionaryInternal TargetSite: System.Object ExecuteBuildUp(Microsoft.Practices.ObjectBuilder2.IBuilderContext) HelpLink: NULL Source: Microsoft.Practices.ObjectBuilder2 StackTrace Information at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context) at Microsoft.Practices.ObjectBuilder2.Builder.BuildUp(IReadWriteLocator locator, ILifetimeContainer lifetime, IPolicyList policies, IStrategyChain strategies, Object buildKey, Object existing) at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name) 5) Exception Information Exception Type: System.InvalidOperationException Message: The parameter screenFactoryRegistry could not be resolved when attempting to call constructor Infinity.Modules.Admin.AdminModule(Microsoft.Practices.Unity.IUnityContainer container, PhoenixIT.IScreenFactoryRegistry screenFactoryRegistry, Microsoft.Practices.Composite.Events.IEventAggregator eventAggregator, PhoenixIT.IBusyService busyService). Data: System.Collections.ListDictionaryInternal TargetSite: Void ThrowForResolutionFailed(System.Exception, System.String, System.String, Microsoft.Practices.ObjectBuilder2.IBuilderContext) HelpLink: NULL Source: Microsoft.Practices.ObjectBuilder2 StackTrace Information at Microsoft.Practices.ObjectBuilder2.DynamicMethodConstructorStrategy.ThrowForResolutionFailed(Exception inner, String parameterName, String constructorSignature, IBuilderContext context) at BuildUp_Infinity.Modules.Admin.AdminModule(IBuilderContext ) at Microsoft.Practices.ObjectBuilder2.DynamicMethodBuildPlan.BuildUp(IBuilderContext context) at Microsoft.Practices.ObjectBuilder2.BuildPlanStrategy.PreBuildUp(IBuilderContext context) at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context) 6) Exception Information Exception Type: Microsoft.Practices.ObjectBuilder2.BuildFailedException ExecutingStrategyTypeName: BuildPlanStrategy ExecutingStrategyIndex: 3 BuildKey: Build Key[PhoenixIT.IScreenFactoryRegistry, null] Message: The current build operation (build key Build Key[PhoenixIT.IScreenFactoryRegistry, null]) failed: The current type, PhoenixIT.IScreenFactoryRegistry, is an interface and cannot be constructed. Are you missing a type mapping? (Strategy type BuildPlanStrategy, index 3) Data: System.Collections.ListDictionaryInternal TargetSite: System.Object ExecuteBuildUp(Microsoft.Practices.ObjectBuilder2.IBuilderContext) HelpLink: NULL Source: Microsoft.Practices.ObjectBuilder2 StackTrace Information at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context) at Microsoft.Practices.Unity.ObjectBuilder.NamedTypeDependencyResolverPolicy.Resolve(IBuilderContext context) at BuildUp_Infinity.Modules.Admin.AdminModule(IBuilderContext ) 7) Exception Information Exception Type: System.InvalidOperationException Message: The current type, PhoenixIT.IScreenFactoryRegistry, is an interface and cannot be constructed. Are you missing a type mapping? Data: System.Collections.ListDictionaryInternal TargetSite: Void ThrowForAttemptingToConstructInterface(Microsoft.Practices.ObjectBuilder2.IBuilderContext) HelpLink: NULL Source: Microsoft.Practices.ObjectBuilder2 StackTrace Information at Microsoft.Practices.ObjectBuilder2.DynamicMethodConstructorStrategy.ThrowForAttemptingToConstructInterface(IBuilderContext context) at BuildUp_PhoenixIT.IScreenFactoryRegistry(IBuilderContext ) at Microsoft.Practices.ObjectBuilder2.DynamicMethodBuildPlan.BuildUp(IBuilderContext context) at Microsoft.Practices.ObjectBuilder2.BuildPlanStrategy.PreBuildUp(IBuilderContext context) at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context) For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Read the article

Tip/Trick: Fix Common SEO Problems Using the URL Rewrite Extension

- by ScottGu

Search engine optimization (SEO) is important for any publically facing web-site. A large % of traffic to sites now comes directly from search engines, and improving your site’s search relevancy will lead to more users visiting your site from search engine queries. This can directly or indirectly increase the money you make through your site. This blog post covers how you can use the free Microsoft URL Rewrite Extension to fix a bunch of common SEO problems that your site might have. It takes less than 15 minutes (and no code changes) to apply 4 simple URL Rewrite rules to your site, and in doing so cause search engines to drive more visitors and traffic to your site. The techniques below work equally well with both ASP.NET Web Forms and ASP.NET MVC based sites. They also works with all versions of ASP.NET (and even work with non-ASP.NET content). [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] Measuring the SEO of your website with the Microsoft SEO Toolkit A few months ago I blogged about the free SEO Toolkit that we’ve shipped. This useful tool enables you to automatically crawl/scan your site for SEO correctness, and it then flags any SEO issues it finds. I highly recommend downloading and using the tool against any public site you work on. It makes it easy to spot SEO issues you might have in your site, and pinpoint ways to optimize it further. Below is a simple example of a report I ran against one of my sites (www.scottgu.com) prior to applying the URL Rewrite rules I’ll cover later in this blog post: Search Relevancy and URL Splitting Two of the important things that search engines evaluate when assessing your site’s “search relevancy” are: How many other sites link to your content. Search engines assume that if a lot of people around the web are linking to your content, then it is likely useful and so weight it higher in relevancy. The uniqueness of the content it finds on your site. If search engines find that the content is duplicated in multiple places around the Internet (or on multiple URLs on your site) then it is likely to drop the relevancy of the content. One of the things you want to be very careful to avoid when building public facing sites is to not allow different URLs to retrieve the same content within your site. Doing so will hurt with both of the situations above. In particular, allowing external sites to link to the same content with multiple URLs will cause your link-count and page-ranking to be split up across those different URLs (and so give you a smaller page rank than what it would otherwise be if it was just one URL). Not allowing external sites to link to you in different ways sounds easy in theory – but you might wonder what exactly this means in practice and how you avoid it. 4 Really Common SEO Problems Your Sites Might Have Below are 4 really common scenarios that can cause your site to inadvertently expose multiple URLs for the same content. When this happens external sites linking to yours will end up splitting their page links across multiple URLs - and as a result cause you to have a lower page ranking with search engines than you deserve. SEO Problem #1: Default Document IIS (and other web servers) supports the concept of a “default document”. This allows you to avoid having to explicitly specify the page you want to serve at either the root of the web-site/application, or within a sub-directory. This is convenient – but means that by default this content is available via two different publically exposed URLs (which is bad). For example: http://scottgu.com/ http://scottgu.com/default.aspx SEO Problem #2: Different URL Casings Web developers often don’t realize URLs are case sensitive to search engines on the web. This means that search engines will treat the following links as two completely different URLs: http://scottgu.com/Albums.aspx http://scottgu.com/albums.aspx SEO Problem #3: Trailing Slashes Consider the below two URLs – they might look the same at first, but they are subtly different. The trailing slash creates yet another situation that causes search engines to treat the URLs as different and so split search rankings: http://scottgu.com http://scottgu.com/ SEO Problem #4: Canonical Host Names Sometimes sites support scenarios where they support a web-site with both a leading “www” hostname prefix as well as just the hostname itself. This causes search engines to treat the URLs as different and split search rankling: http://scottgu.com/albums.aspx/ http://www.scottgu.com/albums.aspx/ How to Easily Fix these SEO Problems in 10 minutes (or less) using IIS Rewrite If you haven’t been careful when coding your sites, chances are you are suffering from one (or more) of the above SEO problems. Addressing these issues will improve your search engine relevancy ranking and drive more traffic to your site. The “good news” is that fixing the above 4 issues is really easy using the URL Rewrite Extension. This is a completely free Microsoft extension available for IIS 7.x (on Windows Server 2008, Windows Server 2008 R2, Windows 7 and Windows Vista). The great thing about using the IIS Rewrite extension is that it allows you to fix the above problems *without* having to change any code within your applications. You can easily install the URL Rewrite Extension in under 3 minutes using the Microsoft Web Platform Installer (a free tool we ship that automates setting up web servers and development machines). Just click the green “Install Now” button on the URL Rewrite Spotlight page to install it on your Windows Server 2008, Windows 7 or Windows Vista machine: Once installed you’ll find that a new “URL Rewrite” icon is available within the IIS 7 Admin Tool: Double-clicking the icon will open up the URL Rewrite admin panel – which will display the list of URL Rewrite rules configured for a particular application or site: Notice that our rewrite rule list above is currently empty (which is the default when you first install the extension). We can click the “Add Rule…” link button in the top-right of the panel to add and enable new URL Rewriting logic for our site. Scenario 1: Handling Default Document Scenarios One of the SEO problems I discussed earlier in this post was the scenario where the “default document” feature of IIS causes you to inadvertently expose two URLs for the same content on your site. For example: http://scottgu.com/ http://scottgu.com/default.aspx We can fix this by adding a new IIS Rewrite rule that automatically redirects anyone who navigates to the second URL to instead go to the first one. We will setup the HTTP redirect to be a “permanent redirect” – which will indicate to search engines that they should follow the redirect and use the new URL they are redirected to as the identifier of the content they retrieve. Let’s look at how we can create such a rule. We’ll begin by clicking the “Add Rule” link in the screenshot above. This will cause the below dialog to display: We’ll select the “Blank Rule” template within the “Inbound rules” section to create a new custom URL Rewriting rule. This will display an empty pane like below: Don’t worry – setting up the above rule is easy. The following 4 steps explain how to do so: Step 1: Name the Rule Our first step will be to name the rule we are creating. Naming it with a descriptive name will make it easier to find and understand later. Let’s name this rule our “Default Document URL Rewrite” rule: Step 2: Setup the Regular Expression that Matches this Rule Our second step will be to specify a regular expression filter that will cause this rule to execute when an incoming URL matches the regex pattern. Don’t worry if you aren’t good with regular expressions - I suck at them too. The trick is to know someone who is good at them or copy/paste them from a web-site. Below we are going to specify the following regular expression as our pattern rule: (.*?)/?Default\.aspx$ This pattern will match any URL string that ends with Default.aspx. The "(.*?)" matches any preceding character zero or more times. The "/?" part says to match the slash symbol zero or one times. The "$" symbol at the end will ensure that the pattern will only match strings that end with Default.aspx. Combining all these regex elements allows this rule to work not only for the root of your web site (e.g. http://scottgu.com/default.aspx) but also for any application or subdirectory within the site (e.g. http://scottgu.com/photos/default.aspx. Because the “ignore case” checkbox is selected it will match both “Default.aspx” as well as “default.aspx” within the URL. One nice feature built-into the rule editor is a “Test pattern” button that you can click to bring up a dialog that allows you to test out a few URLs with the rule you are configuring: Above I've added a “products/default.aspx” URL and clicked the “Test” button. This will give me immediate feedback on whether the rule will execute for it. Step 3: Setup a Permanent Redirect Action We’ll then setup an action to occur when our regular expression pattern matches the incoming URL: In the dialog above I’ve changed the “Action Type” drop down to be a “Redirect” action. The “Redirect Type” will be a HTTP 301 Permanent redirect – which means search engines will follow it. I’ve also set the “Redirect URL” property to be: {R:1}/ This indicates that we want to redirect the web client requesting the original URL to a new URL that has the originally requested URL path - minus the "Default.aspx" in it. For example, requests for http://scottgu.com/default.aspx will be redirected to http://scottgu.com/, and requests for http://scottgu.com/photos/default.aspx will be redirected to http://scottgu.com/photos/ The "{R:N}" regex construct, where N >= 0, is called a back-reference and N is the back-reference index. In the case of our pattern "(.*?)/?Default\.aspx$", if the input URL is "products/Default.aspx" then {R:0} will contain "products/Default.aspx" and {R:1} will contain "products". We are going to use this {R:1}/ value to be the URL we redirect users to. Step 4: Apply and Save the Rule Our final step is to click the “Apply” button in the top right hand of the IIS admin tool – which will cause the tool to persist the URL Rewrite rule into our application’s root web.config file (under a <system.webServer/rewrite> configuration section): <configuration> <system.webServer> <rewrite> <rules> <rule name="Default Document" stopProcessing="true"> <match url="(.*?)/?Default\.aspx$" /> <action type="Redirect" url="{R:1}/" /> </rule> </rules> </rewrite> </system.webServer> </configuration> Because IIS 7.x and ASP.NET share the same web.config files, you can actually just copy/paste the above code into your web.config files using Visual Studio and skip the need to run the admin tool entirely. This also makes adding/deploying URL Rewrite rules with your ASP.NET applications really easy. Step 5: Try the Rule Out Now that we’ve saved the rule, let’s try it out on our site. Try the following two URLs on my site: http://scottgu.com/ http://scottgu.com/default.aspx Notice that the second URL automatically redirects to the first one. Because it is a permanent redirect, search engines will follow the URL and should update the page ranking of http://scottgu.com to include links to http://scottgu.com/default.aspx as well. Scenario 2: Different URL Casing Another common SEO problem I discussed earlier in this post is that URLs are case sensitive to search engines on the web. This means that search engines will treat the following links as two completely different URLs: http://scottgu.com/Albums.aspx http://scottgu.com/albums.aspx We can fix this by adding a new IIS Rewrite rule that automatically redirects anyone who navigates to the first URL to instead go to the second (all lower-case) one. Like before, we will setup the HTTP redirect to be a “permanent redirect” – which will indicate to search engines that they should follow the redirect and use the new URL they are redirected to as the identifier of the content they retrieve. To create such a rule we’ll click the “Add Rule” link in the URL Rewrite admin tool again. This will cause the “Add Rule” dialog to appear again: Unlike the previous scenario (where we created a “Blank Rule”), with this scenario we can take advantage of a built-in “Enforce lowercase URLs” rule template. When we click the “ok” button we’ll see the following dialog which asks us if we want to create a rule that enforces the use of lowercase letters in URLs: When we click the “Yes” button we’ll get a pre-written rule that automatically performs a permanent redirect if an incoming URL has upper-case characters in it – and automatically send users to a lower-case version of the URL: We can click the “Apply” button to use this rule “as-is” and have it apply to all incoming URLs to our site. Because my www.scottgu.com site uses ASP.NET Web Forms, I’m going to make one small change to the rule we generated above – which is to add a condition that will ensure that URLs to ASP.NET’s built-in “WebResource.axd” handler are excluded from our case-sensitivity URL Rewrite logic. URLs to the WebResource.axd handler will only come from server-controls emitted from my pages – and will never be linked to from external sites. While my site will continue to function fine if we redirect these URLs to automatically be lower-case – doing so isn’t necessary and will add an extra HTTP redirect to many of my pages. The good news is that adding a condition that prevents my URL Rewriting rule from happening with certain URLs is easy. We simply need to expand the “Conditions” section of the form above We can then click the “Add” button to add a condition clause. This will bring up the “Add Condition” dialog: Above I’ve entered {URL} as the Condition input – and said that this rule should only execute if the URL does not match a regex pattern which contains the string “WebResource.axd”. This will ensure that WebResource.axd URLs to my site will be allowed to execute just fine without having the URL be re-written to be all lower-case. Note: If you have static resources (like references to .jpg, .css, and .js files) within your site that currently use upper-case characters you’ll probably want to add additional condition filter clauses so that URLs to them also don’t get redirected to be lower-case (just add rules for patterns like .jpg, .gif, .js, etc). Your site will continue to work fine if these URLs get redirected to be lower case (meaning the site won’t break) – but it will cause an extra HTTP redirect to happen on your site for URLs that don’t need to be redirected for SEO reasons. So setting up a condition clause makes sense to add. When I click the “ok” button above and apply our lower-case rewriting rule the admin tool will save the following additional rule to our web.config file: <configuration> <system.webServer> <rewrite> <rules> <rule name="Default Document" stopProcessing="true"> <match url="(.*?)/?Default\.aspx$" /> <action type="Redirect" url="{R:1}/" /> </rule> <rule name="Lower Case URLs" stopProcessing="true"> <match url="[A-Z]" ignoreCase="false" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{URL}" pattern="WebResource.axd" negate="true" /> </conditions> <action type="Redirect" url="{ToLower:{URL}}" /> </rule> </rules> </rewrite> </system.webServer> </configuration> Try the Rule Out Now that we’ve saved the rule, let’s try it out on our site. Try the following two URLs on my site: http://scottgu.com/Albums.aspx http://scottgu.com/albums.aspx Notice that the first URL (which has a capital “A”) automatically does a redirect to a lower-case version of the URL. Scenario 3: Trailing Slashes Another common SEO problem I discussed earlier in this post is the scenario of trailing slashes within URLs. The trailing slash creates yet another situation that causes search engines to treat the URLs as different and so split search rankings: http://scottgu.com http://scottgu.com/ We can fix this by adding a new IIS Rewrite rule that automatically redirects anyone who navigates to the first URL (that does not have a trailing slash) to instead go to the second one that does. Like before, we will setup the HTTP redirect to be a “permanent redirect” – which will indicate to search engines that they should follow the redirect and use the new URL they are redirected to as the identifier of the content they retrieve. To create such a rule we’ll click the “Add Rule” link in the URL Rewrite admin tool again. This will cause the “Add Rule” dialog to appear again: The URL Rewrite admin tool has a built-in “Append or remove the trailing slash symbol” rule template. When we select it and click the “ok” button we’ll see the following dialog which asks us if we want to create a rule that automatically redirects users to a URL with a trailing slash if one isn’t present: Like within our previous lower-casing rewrite rule we’ll add one additional condition clause that will exclude WebResource.axd URLs from being processed by this rule. This will avoid an unnecessary redirect for happening for those URLs. When we click the “OK” button we’ll get a pre-written rule that automatically performs a permanent redirect if the URL doesn’t have a trailing slash – and if the URL is not processed by either a directory or a file. This will save the following additional rule to our web.config file: <configuration> <system.webServer> <rewrite> <rules> <rule name="Default Document" stopProcessing="true"> <match url="(.*?)/?Default\.aspx$" /> <action type="Redirect" url="{R:1}/" /> </rule> <rule name="Lower Case URLs" stopProcessing="true"> <match url="[A-Z]" ignoreCase="false" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{URL}" pattern="WebResource.axd" negate="true" /> </conditions> <action type="Redirect" url="{ToLower:{URL}}" /> </rule> <rule name="Trailing Slash" stopProcessing="true"> <match url="(.*[^/])$" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{REQUEST_FILENAME}" matchType="IsDirectory" negate="true" /> <add input="{REQUEST_FILENAME}" matchType="IsFile" negate="true" /> <add input="{URL}" pattern="WebResource.axd" negate="true" /> </conditions> <action type="Redirect" url="{R:1}/" /> </rule> </rules> </rewrite> </system.webServer> </configuration> Try the Rule Out Now that we’ve saved the rule, let’s try it out on our site. Try the following two URLs on my site: http://scottgu.com http://scottgu.com/ Notice that the first URL (which has no trailing slash) automatically does a redirect to a URL with the trailing slash. Because it is a permanent redirect, search engines will follow the URL and update the page ranking. Scenario 4: Canonical Host Names The final SEO problem I discussed earlier are scenarios where a site works with both a leading “www” hostname prefix as well as just the hostname itself. This causes search engines to treat the URLs as different and split search rankling: http://www.scottgu.com/albums.aspx http://scottgu.com/albums.aspx We can fix this by adding a new IIS Rewrite rule that automatically redirects anyone who navigates to the first URL (that has a www prefix) to instead go to the second URL. Like before, we will setup the HTTP redirect to be a “permanent redirect” – which will indicate to search engines that they should follow the redirect and use the new URL they are redirected to as the identifier of the content they retrieve. To create such a rule we’ll click the “Add Rule” link in the URL Rewrite admin tool again. This will cause the “Add Rule” dialog to appear again: The URL Rewrite admin tool has a built-in “Canonical domain name” rule template. When we select it and click the “ok” button we’ll see the following dialog which asks us if we want to create a redirect rule that automatically redirects users to a primary host name URL: Above I’m entering the primary URL address I want to expose to the web: scottgu.com. When we click the “OK” button we’ll get a pre-written rule that automatically performs a permanent redirect if the URL has another leading domain name prefix. This will save the following additional rule to our web.config file: <configuration> <system.webServer> <rewrite> <rules> <rule name="Cannonical Hostname"> <match url="(.*)" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{HTTP_HOST}" pattern="^scottgu\.com$" negate="true" /> </conditions> <action type="Redirect" url="http://scottgu.com/{R:1}" /> </rule> <rule name="Default Document" stopProcessing="true"> <match url="(.*?)/?Default\.aspx$" /> <action type="Redirect" url="{R:1}/" /> </rule> <rule name="Lower Case URLs" stopProcessing="true"> <match url="[A-Z]" ignoreCase="false" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{URL}" pattern="WebResource.axd" negate="true" /> </conditions> <action type="Redirect" url="{ToLower:{URL}}" /> </rule> <rule name="Trailing Slash" stopProcessing="true"> <match url="(.*[^/])$" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{REQUEST_FILENAME}" matchType="IsDirectory" negate="true" /> <add input="{REQUEST_FILENAME}" matchType="IsFile" negate="true" /> <add input="{URL}" pattern="WebResource.axd" negate="true" /> </conditions> <action type="Redirect" url="{R:1}/" /> </rule> </rules> </rewrite> </system.webServer> </configuration> Try the Rule Out Now that we’ve saved the rule, let’s try it out on our site. Try the following two URLs on my site: http://www.scottgu.com/albums.aspx http://scottgu.com/albums.aspx Notice that the first URL (which has the “www” prefix) now automatically does a redirect to the second URL which does not have the www prefix. Because it is a permanent redirect, search engines will follow the URL and update the page ranking. 4 Simple Rules for Improved SEO The above 4 rules are pretty easy to setup and should take less than 15 minutes to configure on existing sites you already have. The beauty of using a solution like the URL Rewrite Extension is that you can take advantage of it without having to change code within your web-site – and without having to break any existing links already pointing at your site. Users who follow existing links will be automatically redirected to the new URLs you wish to publish. And search engines will start to give your site a higher search relevancy ranking – which will list your site higher in search results and drive more traffic to it. Customizing your URL Rewriting rules further is easy to-do either by editing the web.config file directly, or alternatively, just double click the URL Rewrite icon within the IIS 7.x admin tool and it will list all the active rules for your web-site or application: Clicking any of the rules above will open the rules editor back up and allow you to tweak/customize/save them further. Summary Measuring and improving SEO is something every developer building a public-facing web-site needs to think about and focus on. If you haven’t already, download and use the SEO Toolkit to analyze the SEO of your sites today. New URL Routing features in ASP.NET MVC and ASP.NET Web Forms 4 make it much easier to build applications that have more control over the URLs that are published. Tools like the URL Rewrite Extension that I’ve talked about in this blog post make it much easier to improve the URLs that are published from sites you already have built today – without requiring you to change a lot of code. The URL Rewrite Extension provides a bunch of additional great capabilities – far beyond just SEO - as well. I’ll be covering these additional capabilities more in future blog posts. Hope this helps, Scott

Read the article

how to make bridge networking with KVM work in Fedora19

- by netllama

I'm attempting to get several virtual machines setup on a Fedora-19 host system, with the traditional bridge network devices (br0, br1, etc). I've done this many times before with older versions of Fedora (16, 14, etc), and it just works. However, for reasons that I cannot figure out, the bridge doesn't seem to be working in Fedora19. While I can successfully connect to the outside world (local network + internet) from inside a VM, nothing can communicate with the VM from outside (local network). I'm referring to something as trivial as pinging. From inside the VM, I can ping anything successfully (0% packet loss). However, from outside the VM (on the host, or any other system on the same network), I see 100% packet loss when pinging the IP address of the VM. My first question is simply, does anyone else have this working successfully in F19? And if so, what steps did you need to follow? I'm not using NetworkManager at all, its all the network service. There are no firewalls involved anywhere (iptables & firewall services are currently disabled). Here's the current host configuration: # brctl show bridge name bridge id STP enabled interfaces br0 8000.38eaa792efe5 no em2 vnet1 br1 8000.38eaa792efe6 no em3 br2 8000.38eaa792efe7 no em4 vnet0 virbr0 8000.525400db3ebf yes virbr0-nic # more /etc/sysconfig/network-scripts/ifcfg-em2 TYPE=Ethernet BRIDGE="br0" NAME=em2 DEVICE="em2" UUID=aeaa839e-c89c-4d6e-9daa-79b6a1b919bd ONBOOT=yes HWADDR=38:EA:A7:92:EF:E5 NM_CONTROLLED="no" # more /etc/sysconfig/network-scripts/ifcfg-br0 TYPE=Bridge NM_CONTROLLED="no" BOOTPROTO=dhcp NAME=br0 DEVICE="br0" ONBOOT=yes # ifconfig em2 ;ifconfig br0 em2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::3aea:a7ff:fe92:efe5 prefixlen 64 scopeid 0x20<link> ether 38:ea:a7:92:ef:e5 txqueuelen 1000 (Ethernet) RX packets 100093 bytes 52354831 (49.9 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 25321 bytes 15791341 (15.0 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device memory 0xf7d00000-f7e00000 br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.31.99.226 netmask 255.255.252.0 broadcast 10.31.99.255 inet6 fe80::3aea:a7ff:fe92:efe5 prefixlen 64 scopeid 0x20<link> ether 38:ea:a7:92:ef:e5 txqueuelen 0 (Ethernet) RX packets 19619 bytes 1963328 (1.8 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 11 bytes 1074 (1.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 Relevant section from /etc/libvirt/qemu/foo.xml (one of the VMs with this problem): <interface type='bridge'> <mac address='52:54:00:26:22:9d'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> # ps -ef | grep qemu qemu 1491 1 82 13:25 ? 00:42:09 /usr/bin/qemu-system-x86_64 -machine accel=kvm -name cuda-linux64-build5 -S -machine pc-0.13,accel=kvm,usb=off -cpu SandyBridge,+pdpe1gb,+osxsave,+dca,+pcid,+pdcm,+xtpr,+tm2,+est,+smx,+vmx,+ds_cpl,+monitor,+dtes64,+pbe,+tm,+ht,+ss,+acpi,+ds,+vme -m 16384 -smp 6,sockets=6,cores=1,threads=1 -uuid 6e930234-bdfd-044d-2787-22d4bbbe30b1 -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/cuda-linux64-build5.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=localtime -no-shutdown -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive file=/var/lib/libvirt/images/cuda-linux64-build5.img,if=none,id=drive-virtio-disk0,format=raw,cache=writeback -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 -netdev tap,fd=25,id=hostnet0,vhost=on,vhostfd=26 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:26:22:9d,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -vnc 127.0.0.1:1 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 I can provide additional information, if requested. thanks!

Read the article

Xen kernel can't see 2 disks of 6 of 1TB, does it have a limitation?

- by PartySoft

Linux gentoo-xen 2.6.18-xen-r12 #3 SMP Tue Oct 5 09:28:53 PDT 2010 x86_64 Intel(R) Xeon(R) CPU E5506 @ 2.13GHz GenuineIntel GNU/Linux I have 6 disks of 1 TB and i can't see all of them only 4, can anyone give me an ideea what can i do ? Filesystem Size Used Avail Use% Mounted on rootfs 886G 4.4G 836G 1% / /dev/sda3 886G 4.4G 836G 1% / rc-svcdir 1.0M 44K 980K 5% /lib64/rc/init.d shm 7.9G 0 7.9G 0% /dev/shm /dev/sdb1 917G 200M 871G 1% /home2 /dev/sdc1 917G 200M 871G 1% /home3 /dev/sdd1 917G 200M 871G 1% /home4 The hardware is Dual xeon E5506 processors on a supermicro X8DTL mobo 4.346585] ata3.00: ATA-8, max UDMA/133, 1953525168 sectors: LBA48 NCQ (depth 0/32) [ 4.346588] ata3.00: ata3: dev 0 multi count 16 [ 4.352861] ata3.00: configured for UDMA/133 [ 4.352867] scsi3 : ata_piix [ 4.352875] PM: Adding info for No Bus:host3 [ 4.510584] ata4.00: ATA-8, max UDMA/133, 1953525168 sectors: LBA48 NCQ (depth 0/32) [ 4.510587] ata4.00: ata4: dev 0 multi count 16 [ 4.516848] ata4.00: configured for UDMA/133 [ 4.516861] PM: Adding info for No Bus:target2:0:0 [ 4.516905] Vendor: ATA Model: SAMSUNG HD103SJ Rev: 1AJ1 [ 4.516910] Type: Direct-Access ANSI SCSI revision: 05 [ 4.516920] PM: Adding info for scsi:2:0:0:0 [ 4.517452] SCSI device sde: 1953525168 512-byte hdwr sectors (1000205 MB) [ 4.517460] sde: Write Protect is off [ 4.517461] sde: Mode Sense: 00 3a 00 00 [ 4.517478] SCSI device sde: drive cache: write back [ 4.517514] SCSI device sde: 1953525168 512-byte hdwr sectors (1000205 MB) [ 4.517521] sde: Write Protect is off [ 4.517522] sde: Mode Sense: 00 3a 00 00 [ 4.517532] SCSI device sde: drive cache: write back [ 4.517534] sde: sde1 [ 4.524551] sd 2:0:0:0: Attached scsi disk sde [ 4.524855] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 4.524874] PM: Adding info for No Bus:target3:0:0 [ 4.524928] Vendor: ATA Model: SAMSUNG HD103SJ Rev: 1AJ1 [ 4.524933] Type: Direct-Access ANSI SCSI revision: 05 [ 4.524946] PM: Adding info for scsi:3:0:0:0 [ 4.525216] SCSI device sdf: 1953525168 512-byte hdwr sectors (1000205 MB) [ 4.525227] sdf: Write Protect is off [ 4.525228] sdf: Mode Sense: 00 3a 00 00 [ 4.525242] SCSI device sdf: drive cache: write back [ 4.525280] SCSI device sdf: 1953525168 512-byte hdwr sectors (1000205 MB) [ 4.525286] sdf: Write Protect is off [ 4.525289] sdf: Mode Sense: 00 3a 00 00 [ 4.525301] SCSI device sdf: drive cache: write back [ 4.525302] sdf: sdf1 [ 4.532691] sd 3:0:0:0: Attached scsi disk sdf [ 4.533010] sd 3:0:0:0: Attached scsi generic sg5 type 0 [ 4.977669] scsi: <fdomain> Detection failed (no card) [ 5.030479] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 5.030635] GDT-HA: Found 0 PCI Storage RAID Controllers [ 5.372350] Fusion MPT base driver 3.04.01 [ 5.372358] Copyright (c) 1999-2005 LSI Logic Corporation [ 5.579176] Fusion MPT SPI Host driver 3.04.01 [ 5.881777] ieee1394: Initialized config rom entry `ip1394' [ 6.166745] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [ 6.166748] ieee1394: sbp2: Try serialize_io=0 for better performance [ 6.428866] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 6.428872] md: bitmap version 4.39 [ 6.431518] md: raid0 personality registered for level 0 [ 6.495979] md: raid1 personality registered for level 1 [ 6.570270] raid5: automatically using best checksumming function: generic_sse [ 6.575523] generic_sse: 6608.000 MB/sec [ 6.575526] raid5: using function: generic_sse (6608.000 MB/sec) [ 6.596226] raid6: int64x1 1835 MB/s [ 6.613231] raid6: int64x2 1773 MB/s [ 6.630256] raid6: int64x4 1675 MB/s [ 6.647296] raid6: int64x8 1027 MB/s [ 6.664267] raid6: sse2x1 3578 MB/s [ 6.681268] raid6: sse2x2 4207 MB/s [ 6.698280] raid6: sse2x4 4625 MB/s [ 6.698281] raid6: using algorithm sse2x4 (4625 MB/s) [ 6.698285] md: raid6 personality registered for level 6 [ 6.698286] md: raid5 personality registered for level 5 [ 6.698288] md: raid4 personality registered for level 4 [ 6.781090] md: raid10 personality registered for level 10 [ 7.007043] Intel(R) PRO/1000 Network Driver - version 7.1.9-k4 [ 7.007046] Copyright (c) 1999-2006 Intel Corporation. [ 9.229465] kjournald starting. Commit interval 5 seconds [ 9.229476] EXT3-fs: mounted filesystem with ordered data mode.

Read the article

NIC Bonding/balance-rr with Dell PowerConnect 5324

- by Branden Martin

I'm trying to get NIC bonding to work with balance-rr so that three NIC ports are combined, so that instead of getting 1 Gbps we get 3 Gbps. We are doing this on two servers connected to the same switch. However, we're only getting the speed of one physical link. We are using 1 Dell PowerConnect 5324, SW version 2.0.1.3, Boot version 1.0.2.02, HW version 00.00.02. Both servers are CentOS 5.9 (Final) running OnApp Hypervisor (CloudBoot) Server 1 is using ports g5-g7 in port-channel 1. Server 2 is using ports g9-g11 in port-channel 2. Switch show interface status Port Type Duplex Speed Neg ctrl State Pressure Mode -------- ------------ ------ ----- -------- ---- ----------- -------- ------- g1 1G-Copper -- -- -- -- Down -- -- g2 1G-Copper Full 1000 Enabled Off Up Disabled Off g3 1G-Copper -- -- -- -- Down -- -- g4 1G-Copper -- -- -- -- Down -- -- g5 1G-Copper Full 1000 Enabled Off Up Disabled Off g6 1G-Copper Full 1000 Enabled Off Up Disabled Off g7 1G-Copper Full 1000 Enabled Off Up Disabled On g8 1G-Copper Full 1000 Enabled Off Up Disabled Off g9 1G-Copper Full 1000 Enabled Off Up Disabled On g10 1G-Copper Full 1000 Enabled Off Up Disabled On g11 1G-Copper Full 1000 Enabled Off Up Disabled Off g12 1G-Copper Full 1000 Enabled Off Up Disabled On g13 1G-Copper -- -- -- -- Down -- -- g14 1G-Copper -- -- -- -- Down -- -- g15 1G-Copper -- -- -- -- Down -- -- g16 1G-Copper -- -- -- -- Down -- -- g17 1G-Copper -- -- -- -- Down -- -- g18 1G-Copper -- -- -- -- Down -- -- g19 1G-Copper -- -- -- -- Down -- -- g20 1G-Copper -- -- -- -- Down -- -- g21 1G-Combo-C -- -- -- -- Down -- -- g22 1G-Combo-C -- -- -- -- Down -- -- g23 1G-Combo-C -- -- -- -- Down -- -- g24 1G-Combo-C Full 100 Enabled Off Up Disabled On Flow Link Ch Type Duplex Speed Neg control State -------- ------- ------ ----- -------- ------- ----------- ch1 1G Full 1000 Enabled Off Up ch2 1G Full 1000 Enabled Off Up ch3 -- -- -- -- -- Not Present ch4 -- -- -- -- -- Not Present ch5 -- -- -- -- -- Not Present ch6 -- -- -- -- -- Not Present ch7 -- -- -- -- -- Not Present ch8 -- -- -- -- -- Not Present Server 1: cat /etc/sysconfig/network-scripts/ifcfg-eth3 DEVICE=eth3 HWADDR=00:1b:21:ac:d5:55 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth4 DEVICE=eth4 HWADDR=68:05:ca:18:28:ae USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth5 DEVICE=eth5 HWADDR=68:05:ca:18:28:af USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-onappstorebond DEVICE=onappstorebond IPADDR=10.200.52.1 NETMASK=255.255.0.0 GATEWAY=10.200.2.254 NETWORK=10.200.0.0 USERCTL=no BOOTPROTO=none ONBOOT=yes cat /proc/net/bonding/onappstorebond Ethernet Channel Bonding Driver: v3.4.0-1 (October 7, 2008) Bonding Mode: load balancing (round-robin) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth3 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 00:1b:21:ac:d5:55 Slave Interface: eth4 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:28:ae Slave Interface: eth5 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:28:af Server 2: cat /etc/sysconfig/network-scripts/ifcfg-eth3 DEVICE=eth3 HWADDR=00:1b:21:ac:d5:a7 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth4 DEVICE=eth4 HWADDR=68:05:ca:18:30:30 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth5 DEVICE=eth5 HWADDR=68:05:ca:18:30:31 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-onappstorebond DEVICE=onappstorebond IPADDR=10.200.53.1 NETMASK=255.255.0.0 GATEWAY=10.200.3.254 NETWORK=10.200.0.0 USERCTL=no BOOTPROTO=none ONBOOT=yes cat /proc/net/bonding/onappstorebond Ethernet Channel Bonding Driver: v3.4.0-1 (October 7, 2008) Bonding Mode: load balancing (round-robin) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth3 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 00:1b:21:ac:d5:a7 Slave Interface: eth4 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:30:30 Slave Interface: eth5 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:30:31 Here are the results of iperf. ------------------------------------------------------------ Client connecting to 10.200.52.1, TCP port 5001 TCP window size: 27.7 KByte (default) ------------------------------------------------------------ [ 3] local 10.200.3.254 port 53766 connected with 10.200.52.1 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 950 MBytes 794 Mbits/sec

Read the article

Raid 1 array won't assemble after power outage. How do I fix this ext4 mirror?

- by Forkrul Assail

Two ext4 drives on Raid 1 with mdadm won't reassemble after the power went out for an extended period (UPS drained). After turning the machine back on, mdadm said that the array was degraded, after which it took about 2 days for a full resync, which completed without problems. On trying to remount the array I get: mount: you must specify the filesystem type cat /etc/fstab lines relevant to setup: /dev/md127 /media/mediapool ext4 defaults 0 0 dmesg | tail (on trying to mount) says: [ 1050.818782] EXT3-fs (md127): error: can't find ext3 filesystem on dev md127. [ 1050.849214] EXT4-fs (md127): VFS: Can't find ext4 filesystem [ 1050.944781] FAT-fs (md127): invalid media value (0x00) [ 1050.944782] FAT-fs (md127): Can't find a valid FAT filesystem [ 1058.272787] EXT2-fs (md127): error: can't find an ext2 filesystem on dev md127. cat /proc/mdstat says: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md127 : active (auto-read-only) raid1 sdj[2] sdi[0] 2930135360 blocks super 1.2 [2/2] [UU] unused devices: <none> fsck /dev/md127 says: fsck from util-linux 2.20.1 e2fsck 1.42 (29-Nov-2011) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/md127 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> mdadm -E /dev/sdi gives me: /dev/sdi: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 37ac1824:eb8a21f6:bd5afd6d:96da6394 Name : sojourn:33 Creation Time : Sat Nov 10 10:43:52 2012 Raid Level : raid1 Raid Devices : 2 Avail Dev Size : 5860271016 (2794.40 GiB 3000.46 GB) Array Size : 2930135360 (2794.39 GiB 3000.46 GB) Used Dev Size : 5860270720 (2794.39 GiB 3000.46 GB) Data Offset : 262144 sectors Super Offset : 8 sectors State : clean Device UUID : 3e6e9a4f:6c07ab3d:22d47fce:13cecfd0 Update Time : Tue Nov 13 20:34:18 2012 Checksum : f7d10db9 - correct Events : 27 Device Role : Active device 0 Array State : AA ('A' == active, '.' == missing) boot@boot ~ $ sudo mdadm -E /dev/sdj /dev/sdj: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 37ac1824:eb8a21f6:bd5afd6d:96da6394 Name : sojourn:33 Creation Time : Sat Nov 10 10:43:52 2012 Raid Level : raid1 Raid Devices : 2 Avail Dev Size : 5860271016 (2794.40 GiB 3000.46 GB) Array Size : 2930135360 (2794.39 GiB 3000.46 GB) Used Dev Size : 5860270720 (2794.39 GiB 3000.46 GB) Data Offset : 262144 sectors Super Offset : 8 sectors State : clean Device UUID : 7fb84af4:e9295f7b:ede61f27:bec0cb57 Update Time : Tue Nov 13 20:34:18 2012 Checksum : b9d17fef - correct Events : 27 Device Role : Active device 1 Array State : AA ('A' == active, '.' == missing) machine@user ~ dmesg | tail [ 61.785866] init: alsa-restore main process (2736) terminated with status 99 [ 68.433548] eth0: no IPv6 routers present [ 534.142511] EXT4-fs (sdi): ext4_check_descriptors: Block bitmap for group 0 not in group (block 2838187772)! [ 534.142518] EXT4-fs (sdi): group descriptors corrupted! [ 546.418780] EXT2-fs (sdi): error: couldn't mount because of unsupported optional features (240) [ 549.654127] EXT3-fs (sdi): error: couldn't mount because of unsupported optional features (240) Since this is Raid 1 it was suggested that I try and mount or fsck the drives separately. After a long fsck on one drive, it ended with this as tail: Illegal double indirect block (2298566437) in inode 39717736. CLEARED. Illegal block #4231180 (2611866932) in inode 39717736. CLEARED. Error storing directory block information (inode=39717736, block=0, num=1092368): Memory allocation failed Recreate journal? yes Creating journal (32768 blocks): Done. *** journal has been re-created - filesystem is now ext3 again *** The drive however still doesn't want to mount: dmesg | tail [ 170.674659] md: export_rdev(sdc) [ 170.675152] md: export_rdev(sdc) [ 195.275288] md: export_rdev(sdc) [ 195.275876] md: export_rdev(sdc) [ 1338.540092] CE: hpet increased min_delta_ns to 30169 nsec [26125.734105] EXT4-fs (sdc): ext4_check_descriptors: Checksum for group 0 failed (43502!=37987) [26125.734115] EXT4-fs (sdc): group descriptors corrupted! [26182.325371] EXT3-fs (sdc): error: couldn't mount because of unsupported optional features (240) [27083.316519] EXT4-fs (sdc): ext4_check_descriptors: Checksum for group 0 failed (43502!=37987) [27083.316530] EXT4-fs (sdc): group descriptors corrupted! Please help me fix this. I never in my wildest nightmares thought a complete mirror would die this badly. Am I missing something? Suggestions on fixing this? Could someone explain why it would resync after the powerout, only to seemingly nuke the drive? Thanks for reading. Any help much appreciated. I've tried everything I can think of, including booting and filesystem checking with SystemRescue and Ubuntu liveboot discs.

Read the article

Logitech USB headphones detected and selected in Debian Squeeze but sound still coming from speakers

- by mattalexx

I have a pair of Logitech wireless USB headphones that work with Ubuntu Natty but aren't working in Debian Squeeze. When they are selected as the default audio output, the sound comes out of the speakers instead of the headphones. I have rebooted and tried using a different USB port. My computer is a Thinkpad T510. How can I fix this problem? Here is lsusb: Bus 002 Device 005: ID 046d:0a29 Logitech, Inc. Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Here is cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xf2420000 irq 17 1 [Headset ]: USB-Audio - Logitech Wireless Headset Logitech Logitech Wireless Headset at usb-0000:00:1d.0-1.1, full speed 2 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xcdefc000 irq 17 Here is the gnome-volume-control GUI: Here's lsmod | grep usb: snd_usb_audio 50670 0 snd_usb_lib 11192 1 snd_usb_audio usbhid 28008 0 hid 50909 1 usbhid snd_rawmidi 12513 2 snd_usb_lib,snd_seq_midi snd_hwdep 4054 2 snd_usb_audio,snd_hda_codec snd_pcm 47226 3 snd_usb_audio,snd_hda_intel,snd_hda_codec usbcore 98969 5 snd_usb_audio,snd_usb_lib,usbhid,ehci_hcd snd 34423 11 snd_usb_audio,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device nls_base 4541 1 usbcore Here's cat /etc/modprobe.d/alsa-base.conf: # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe --quiet snd-ioctl32 ; /sbin/modprobe --quiet snd-seq ; } install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi && { /sbin/modprobe --quiet snd-seq-midi ; : ; } install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 && { /sbin/modprobe --quiet snd-emu10k1-synth ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 # Keep snd-pcsp from beeing loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 EDIT In VLC, I reset VLC prefs (Output: Default) and sound still comes out of speakers as expected. Then I change it to "Output: ALSA Audio output" and a Device menu appears. I select the headphones. When I then save the prefs, the audio switch to the headphones! But here's what's weird: I go back to prefs, change it to "Output: Default" and the headphones keep working. Maybe the ALSA option is actually what is being chosen as the "Default" option, but the Device menu (whose selection is still being used) is still set to the headphones. Anyway, now I need to figure out how to make it work as the default for the whole system.

Read the article

Physical Directories vs. MVC View Paths

- by Rick Strahl

This post falls into the bucket of operator error on my part, but I want to share this anyway because it describes an issue that has bitten me a few times now and writing it down might keep it a little stronger in my mind. I've been working on an MVC project the last few days, and at the end of a long day I accidentally moved one of my View folders from the MVC Root Folder to the project root. It must have been at the very end of the day before shutting down because tests and manual site navigation worked fine just before I quit for the night. I checked in changes and called it a night. Next day I came back, started running the app and had a lot of breaks with certain views. Oddly custom routes to these controllers/views worked, but stock /{controller}/{action} routes would not. After a bit of spelunking I realized that "Hey one of my View Folders is missing", which made some sense given the error messages I got. I looked in the recycle bin - nothing there, so rather than try to figure out what the hell happened, just restored from my last SVN checkin. At this point the folders are back… but… view access still ends up breaking for this set of views. Specifically I'm getting the Yellow Screen of Death with: CS0103: The name 'model' does not exist in the current context Here's the full error: Server Error in '/ClassifiedsWeb' Application. Compilation ErrorDescription: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.Compiler Error Message: CS0103: The name 'model' does not exist in the current contextSource Error: Line 1: @model ClassifiedsWeb.EntryViewModel Line 2: @{ Line 3: ViewBag.Title = Model.Entry.Title + " - " + ClassifiedsBusiness.App.Configuration.ApplicationName; Source File: c:\Projects2010\Clients\GorgeNet\Classifieds\ClassifiedsWeb\Classifieds\Show.cshtml Line: 1 Compiler Warning Messages: Show Detailed Compiler Output: Show Complete Compilation Source: Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.272 Here's what's really odd about this error: The views now do exist in the /Views/Classifieds folder of the project, but it appears like MVC is trying to execute the views directly. This is getting pretty weird, man! So I hook up some break points in my controllers to see if my controller actions are getting fired - and sure enough it turns out they are not - but only for those views that were previously 'lost' and then restored from SVN. WTF? At this point I'm thinking that I must have messed up one of the config files, but after some more spelunking and realizing that all the other Controller views work, I give up that idea. Config's gotta be OK if other controllers and views are working. Root Folders and MVC Views don't mix As I mentioned the problem was the fact that I inadvertantly managed to drag my View folder to the root folder of the project. Here's what this looks like in my FUBAR'd project structure after I copied back /Views/Classifieds folder from SVN: There's the actual root folder in the /Views folder and the accidental copy that sits of the root. I of course did not notice the /Classifieds folder at the root because it was excluded and didn't show up in the project. Now, before you call me a complete idiot remember that this happened by accident - an accidental drag probably just before shutting down for the night. :-) So why does this break? MVC should be happy with views in the /Views/Classifieds folder right? While MVC might be happy, IIS is not. The fact that there is a physical folder on disk takes precedence over MVC's routing. In other words if a URL exists that matches a route the pysical path is accessed first. What happens here is that essentially IIS is trying to execute the .cshtml pages directly without ever routing to the Controller methods. In the error page I showed above my clue should have been that the view was served as: c:\Projects2010\Clients\GorgeNet\Classifieds\ClassifiedsWeb\Classifieds\Show.cshtml rather than c:\Projects2010\Clients\GorgeNet\Classifieds\ClassifiedsWeb\Views\Classifieds\Show.cshtml But of course I didn't notice that right away, just skimming to the end and looking at the file name. The reason that /classifieds/list actually fires that file is that the ASP.NET Web Pages engine looks for physical files on disk that match a path. IOW, when calling Web Pages you drop the .cshtml off the Razor page and IIS will serve that just fine. So: /classifieds/list looks and tries to find /classifieds/list.cshtml and executes that script. And that is exactly what's happening. Web Pages is trying to execute the .cshtml file and it fails because Web Pages knows nothing about the @model tag which is an MVC specific template extension. This is why my breakpoints in the controller methods didn't fire and it also explains why the error mentions that the @model key word is invalid (@model is an MVC provided template enhancement to the Razor Engine). The solution of course is super simple: Delete the accidentally created root folder and the problem is solved. Routing and Physical Paths I've run into problems with this before actually. In the past I've had a number of applications that had a physical /Admin folder which also would conflict with an MVC Admin controller. More than once I ended up wondering why the index route (/Admin/) was not working properly. If a physical /Admin folder exists /Admin will not route to the Index action (or whatever default action you have set up, but instead try to list the directory or show the default document in the folder. The only way to force the index page through MVC is to explicitly use /Admin/Index. Makes perfect sense once you realize the physical folder is there, but that's easy to forget in an MVC application. As you might imagine after a few times of running into this I gave up on the Admin folder and moved everything into MVC views to handle those operations. Still it's one of those things that can easily bite you, because the behavior and error messages seem to point at completely different problems. Moral of the story is: If you see routing problems where routes are not reaching obvious controller methods, always check to make sure there's isn't a physical path being mapped by IIS instead. That way you won't feel stupid like I did after trying a million things for about an hour before discovering my sloppy mousing behavior :-)© Rick Strahl, West Wind Technologies, 2005-2012Posted in MVC IIS7 Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Bluetooth RFCOMM / SDP connection to a RS232 adapter in android

- by ThePosey

Hello All, I am trying to use the Bluetooth Chat sample API app that google provides to connect to a bluetooth RS232 adapter hooked up to another device. Here is the app for reference: http://developer.android.com/resources/samples/BluetoothChat/index.html And here is the spec sheet for the RS232 connector just for reference: http://serialio.com/download/Docs/BlueSnap-guide-4.77_Commands.pdf Well the problem is that when I go to connect to the device with: mmSocket.connect(); (BluetoothSocket::connect()) I always get an IOException error thrown by the connect() method. When I do a toString on the exception I get "Service discovery failed". My question is mostly what are the cases that would cause an IOException to get thrown in the connect method? I know those are in the source somewhere but I don't know exactly how the java layer that you write apps in and the C/C++ layer that contains the actual stacks interface. I know that it uses the bluez bluetooth stack which is written in C/C++ but not sure how that ties into the java layer which is what I would think is throwing the exception. Any help on pointing me to where I can try to dissect this issue would be incredible. Also just to note I am able to pair with the RS232 adapter just fine but I am never able to actually connect. Here is the logcat output for more reference: I/ActivityManager( 1018): Displayed activity com.example.android.BluetoothChat/.DeviceListActivity: 326 ms (total 326 ms) E/BluetoothService.cpp( 1018): stopDiscoveryNative: D-Bus error in StopDiscovery: org.bluez.Error.Failed (Invalid discovery session) D/BluetoothChat( 1729): onActivityResult -1 D/BluetoothChatService( 1729): connect to: 00:06:66:03:0C:51 D/BluetoothChatService( 1729): setState() STATE_LISTEN - STATE_CONNECTING E/BluetoothChat( 1729): + ON RESUME + I/BluetoothChat( 1729): MESSAGE_STATE_CHANGE: STATE_CONNECTING I/BluetoothChatService( 1729): BEGIN mConnectThread E/BluetoothService.cpp( 1018): stopDiscoveryNative: D-Bus error in StopDiscovery: org.bluez.Error.Failed (Invalid discovery session) E/BluetoothEventLoop.cpp( 1018): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/1498/hci0/dev_00_06_66_03_0C_51 I/BluetoothChatService( 1729): CONNECTION FAIL TOSTRING: java.io.IOException: Service discovery failed D/BluetoothChatService( 1729): setState() STATE_CONNECTING - STATE_LISTEN D/BluetoothChatService( 1729): start D/BluetoothChatService( 1729): setState() STATE_LISTEN - STATE_LISTEN I/BluetoothChat( 1729): MESSAGE_STATE_CHANGE: STATE_LISTEN V/BluetoothEventRedirector( 1080): Received android.bleutooth.device.action.UUID I/NotificationService( 1018): enqueueToast pkg=com.example.android.BluetoothChat callback=android.app.ITransientNotification$Stub$Proxy@446327c8 duration=0 I/BluetoothChat( 1729): MESSAGE_STATE_CHANGE: STATE_LISTEN E/BluetoothEventLoop.cpp( 1018): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/1498/hci0/dev_00_06_66_03_0C_51 V/BluetoothEventRedirector( 1080): Received android.bleutooth.device.action.UUID The device I'm trying to connect to is the 00:06:66:03:0C:51 which I can scan for and apparently pair with just fine. The below is merged from a similar question which was successfully resolved by the selected answer here: How can one connect to an rfcomm device other than another phone in Android? The Android API provides examples of using listenUsingRfcommWithServiceRecord() to set up a socket and createRfcommSocketToServiceRecord() to connect to that socket. I'm trying to connect to an embedded device with a BlueSMiRF Gold chip. My working Python code (using the PyBluez library), which I'd like to port to Android, is as follows: sock = bluetooth.BluetoothSocket(proto=bluetooth.RFCOMM) sock.connect((device_addr, 1)) return sock.makefile() ...so the service to connect to is simply defined as channel 1, without any SDP lookup. As the only documented mechanism I see in the Android API does SDP lookup of a UUID, I'm slightly at a loss. Using "sdptool browse" from my Linux host comes up empty, so I surmise that the chip in question simply lacks SDP support.

Read the article

Problems with blocking reads using libudev on Linux

- by Steve Hawkins

We are using the following routine (on Linux, with libudev) to read data from a PIC microcontroller configured as a USB HID device. The data is sent only when a button connected to the PIC microcontroller is pressed or released. The routine is missing messages from the PIC controller, and I suspect that this is because the call to poll below is not behaving as it should. The call to poll will reliably block for 1 second util the first message is read. As soon as the first message is read, the call to poll returns immediately instead of blocking for 1 second (1000 milliseconds) like it should. I have worked around this problem by closing and re-opening the device after each read. This makes poll behave correctly, but I think that closing and re-opening the device may be the reason for the lost messages. bool PicIo::Receive (unsigned char* picData, const size_t picDataSize) { static hiddev_report_info hidReportInfo; static hiddev_usage_ref_multi hidUsageRef; if (-1 == PicDeviceDescriptor()) { return false; } // Determine whether or not there is data available to be read pollfd pollFd; pollFd.fd = PicDeviceDescriptor(); pollFd.events = POLLIN; int dataPending = poll (&pollFd, 1, 1000); if (dataPending <= 0) { return false; } // Initialize the HID Report structure for an input report hidReportInfo.report_type = HID_REPORT_TYPE_INPUT; hidReportInfo.report_id = 0; hidReportInfo.num_fields = 64; if (-1 == ioctl(PicDeviceDescriptor(), HIDIOCGREPORT, &hidReportInfo)) { return false; } // Initizlize the HID Usage Reference for an Input report hidUsageRef.uref.report_type = HID_REPORT_TYPE_INPUT; hidUsageRef.uref.report_id = 0; hidUsageRef.uref.field_index = 0; hidUsageRef.uref.usage_index = 0; hidUsageRef.num_values = 64; if (-1 == ioctl(PicDeviceDescriptor(), HIDIOCGUSAGES, &hidUsageRef)) { return false; } // Transfer bytes from the usage report into the return value. for (size_t idx=0; (idx < 64) && (idx < picDataSize); ++idx) { picData[idx] = hidUsageRef.values[idx]; } return true; } The function PicDeviceDescriptor() does checking on the device to make sure that it is present. Here are the pertinent details of the PicDeviceDescriptor function, showing how the device is begin opened. int PicIo::PicDeviceDescriptor(int command) { struct stat statInfo; static int picDeviceDescriptor = -1; string picDevicePath = "/dev/usb/hiddev0"; if ((-1 != picDeviceDescriptor) && (CLOSE == command)) { close (picDeviceDescriptor); picDeviceDescriptor = -1; } else if ((-1 != picDeviceDescriptor) && (-1 == fstat(picDeviceDescriptor, &statInfo))) { // Handle the case where the PIC device had previously been detected, and // is now disconnected. close (picDeviceDescriptor); picDeviceDescriptor = -1; } else if ((-1 == picDeviceDescriptor) && (m_picDevice.IsConnected())) { // Create the PIC device descriptor if the PIC device is present (i.e. its // device node is present) and if the descriptor does not already exist picDeviceDescriptor = open (picDevicePath.c_str(), O_RDONLY); } return picDeviceDescriptor; } I'm sure that I'm doing something wrong, but I've Googled the issue and cannot seem to find any relevant answers. Any help would be very much appreciated -- Thx.

Read the article

C++ Serial Port Question

- by Pfeffer

Problem: I have a hand held device that scans those graphic color barcodes on all packaging. There is a track device that I can use that will slide the device automatically. This track device functions by taking ascii code through a serial port. I need to get this thing to work in FileMaker on a Mac. So no terminal programs, etc... What I've got so far: I bought a Keyspan USB/Serial adapter. Using a program called ZTerm I was successful in sending commands to the device. Example: "C,7^M^J" I was also able to do the same thing in Terminal using this command: screen /dev/tty.KeySerial1 57600 and then type in the same command above(but when I typed in I just hit Control-M and Control-J for the carriage return and line feed) Now I'm writing a plug-in for FileMaker(in C++ of course). I want to get what I did above happen in C++ so when I install that plug-in in FileMaker I can just call one of those functions and have the whole process take place right there. I'm able to connect to the device, but I can't talk to it. It is not responding to anything. I've tried connecting to the device(successfully) using these: FILE *comport; if ((comport = fopen("/dev/tty.KeySerial1", "w")) == NULL){...} and int fd; fd = open("/dev/tty.KeySerial1", O_RDWR | O_NOCTTY | O_NDELAY); This is what I've tried so far in way of talking to the device: fputs ("C,7^M^J",comport); or fprintf(comport,"C,7^M^J"); or char buffer[] = { 'C' , ',' , '7' , '^' , 'M' , '^' , 'J' }; fwrite (buffer , 1 , sizeof(buffer) , comport ); or fwrite('C,7^M^J', 1, 1, comport); Questions: When I connected to the device from Terminal and using ZTerm, I was able to set my baud rate of 57600. I think that may be why it isn't responding here. But I don't know how to do it here.... Does any one know how to do that? I tried this, but it didn't work: comport->BaudRate = 57600; There are a lot of class solutions out there but they all call these include files like termios.h and stdio.h. I don't have these and, for whatever reason, I can't find them to download. I've downloaded a few examples but there are like 20 files in them and they're all calling other files I can't find(like the ones listed above). Do I need to find these and if so where? I just don't know enough about C++ Is there a website where I can download libraries?? Another solution might be to put those terminal commands in C++. Is there a way to do that? So this has been driving me crazy. I'm not a C++ guy, I only know basic programming concepts. Is anyone out there a C++ expert? I ideally I'd like this to just work using functions I already have, like those fwrite, fputs stuff. Thanks!

Read the article

Solaris OpenStack Horizon customizations

- by GirishMoodalbail-Oracle

In Oracle Solaris OpenStack Havana, we have customized the Horizon BUI by modifying existing dashboard and panels to reflect only those features that we support. The modification mostly involves: -- disabling an widget (checkbox, button, textarea, and so on) -- removal of a tab from a panel -- removal of options from pull-down menus The following table lists the customizations that we have made. |-----------------------------+-----------------------------------------------------| | Where | What | |-----------------------------+-----------------------------------------------------| | Project => Instances => | Post-Creation tab is removed. | | Launch Instance | | | | | | Project => Instances => | Security Groups tab is removed. | | Actions => Edit Instance | | | | | | Project => Instances => | Console tab is removed. | | Instance Name | | | | | | Project => Instances => | Following actions Console, Edit Security Groups, | | Actions | Pause Instance, Suspend Instance, Resize Instance, | | | Rebuild Instance, and Migrate Instance are removed. | | | | | Project => | Security Groups tab is removed. | | Access and Security | | | | | | Project => | Create Volume action is removed. | | Images and Snapshots => | | | Images => Actions | | | | | | Project => Networks => | Admin State is disabled and its value is always | | Create Network | true. | | | | | Project => Networks => | Disable Gateway checkbox is disabled, and its | | Create Network => | value is always false. | | Subnet | | | | | | Project => Networks => | Allocation Pools and Host Routes text area are | | Create Network => | disabled. | | Subnet Detail | | | | | | Project => Networks => | Edit Subnet action is removed. | | Network Name => Subnet => | | | Actions | | | | | | Project => Networks => | Edit Port action is removed. | | Network Name => Ports => | | | Actions | | | | | | Admin => Instnaces => | Following actions Console, Pause Instance, | | Actions | Suspend Instance, and Migrate Instance are removed. | | | | | Admin => Networks => | Edit Network action is removed | | Actions | | | | | | Admin => Networks => | Edit Subnet action is removed | | Subnets => Actions | | | | | | Admin => Networks => | Edit Port action is removed | | Ports => Actions | | | | | | Admin => Networks => | Admin State and Shared check box are disabled. | | Create Network | Network's Admin State is always true, and Shared is | | | always false. | | | | | Admin => Networks => | Admin State check box is disabled and its value | | Network Name => Create Port | is always true. | |-----------------------------+-----------------------------------------------------|

Read the article

No GLX on Intel card with multiseat with additional nVidia card

- by MeanEYE

I have multiseat configured and my Xorg has 2 server layouts. One is for nVidia card and other is for Intel card. They both work, but display server assigned to Intel card doesn't have hardware acceleration since DRI and GLX module being used is from nVidia driver. So my question is, can I configure layouts somehow to use right DRI and GLX with each card? My Xorg.conf: Section "ServerLayout" Identifier "Default" Screen 0 "Screen0" 0 0 Option "Xinerama" "0" EndSection Section "ServerLayout" Identifier "TV" Screen 0 "Screen1" 0 0 Option "Xinerama" "0" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E198WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 610" EndSection Section "Device" Identifier "Device1" Driver "intel" BusID "PCI:0:2:0" Option "AccelMethod" "uxa" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-0: nvidia-auto-select +1440+0, DFP-1: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Log file for Intel: [ 18.239] X.Org X Server 1.13.0 Release Date: 2012-09-05 [ 18.239] X Protocol Version 11, Revision 0 [ 18.239] Build Operating System: Linux 2.6.24-32-xen x86_64 Ubuntu [ 18.239] Current Operating System: Linux bytewiper 3.5.0-18-generic #29-Ubuntu SMP Fri Oct 19 10:26:51 UTC 2012 x86_64 [ 18.239] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic root=UUID=fc0616fd-f212-4846-9241-ba4a492f0513 ro quiet splash [ 18.239] Build Date: 20 September 2012 11:55:20AM [ 18.239] xorg-server 2:1.13.0+git20120920.70e57668-0ubuntu0ricotz (For technical support please see http://www.ubuntu.com/support) [ 18.239] Current version of pixman: 0.26.0 [ 18.239] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 18.239] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 18.239] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Nov 21 18:32:14 2012 [ 18.239] (==) Using config file: "/etc/X11/xorg.conf" [ 18.239] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 18.239] (++) ServerLayout "TV" [ 18.239] (**) |-->Screen "Screen1" (0) [ 18.239] (**) | |-->Monitor "Monitor1" [ 18.240] (**) | |-->Device "Device1" [ 18.240] (**) Option "Xinerama" "0" [ 18.240] (==) Automatically adding devices [ 18.240] (==) Automatically enabling devices [ 18.240] (==) Automatically adding GPU devices [ 18.240] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 18.240] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 18.240] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 18.240] (II) Loader magic: 0x7f6917944c40 [ 18.240] (II) Module ABI versions: [ 18.240] X.Org ANSI C Emulation: 0.4 [ 18.240] X.Org Video Driver: 13.0 [ 18.240] X.Org XInput driver : 18.0 [ 18.240] X.Org Server Extension : 7.0 [ 18.240] (II) config/udev: Adding drm device (/dev/dri/card0) [ 18.241] (--) PCI: (0:0:2:0) 8086:0152:1043:84ca rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64 [ 18.241] (--) PCI:*(0:1:0:0) 10de:104a:1458:3546 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288 [ 18.241] (II) Open ACPI successful (/var/run/acpid.socket) [ 18.241] Initializing built-in extension Generic Event Extension [ 18.241] Initializing built-in extension SHAPE [ 18.241] Initializing built-in extension MIT-SHM [ 18.241] Initializing built-in extension XInputExtension [ 18.241] Initializing built-in extension XTEST [ 18.241] Initializing built-in extension BIG-REQUESTS [ 18.241] Initializing built-in extension SYNC [ 18.241] Initializing built-in extension XKEYBOARD [ 18.241] Initializing built-in extension XC-MISC [ 18.241] Initializing built-in extension SECURITY [ 18.241] Initializing built-in extension XINERAMA [ 18.241] Initializing built-in extension XFIXES [ 18.241] Initializing built-in extension RENDER [ 18.241] Initializing built-in extension RANDR [ 18.241] Initializing built-in extension COMPOSITE [ 18.241] Initializing built-in extension DAMAGE [ 18.241] Initializing built-in extension MIT-SCREEN-SAVER [ 18.241] Initializing built-in extension DOUBLE-BUFFER [ 18.241] Initializing built-in extension RECORD [ 18.241] Initializing built-in extension DPMS [ 18.241] Initializing built-in extension X-Resource [ 18.241] Initializing built-in extension XVideo [ 18.241] Initializing built-in extension XVideo-MotionCompensation [ 18.241] Initializing built-in extension XFree86-VidModeExtension [ 18.241] Initializing built-in extension XFree86-DGA [ 18.241] Initializing built-in extension XFree86-DRI [ 18.241] Initializing built-in extension DRI2 [ 18.241] (II) LoadModule: "glx" [ 18.241] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 18.247] (II) Module glx: vendor="NVIDIA Corporation" [ 18.247] compiled for 4.0.2, module version = 1.0.0 [ 18.247] Module class: X.Org Server Extension [ 18.247] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012 [ 18.247] Loading extension GLX [ 18.247] (II) LoadModule: "intel" [ 18.248] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 18.248] (II) Module intel: vendor="X.Org Foundation" [ 18.248] compiled for 1.13.0, module version = 2.20.13 [ 18.248] Module class: X.Org Video Driver [ 18.248] ABI class: X.Org Video Driver, version 13.0 [ 18.248] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 18.248] (++) using VT number 8 [ 18.593] (II) intel(0): using device path '/dev/dri/card0' [ 18.593] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 18.593] (==) intel(0): RGB weight 888 [ 18.593] (==) intel(0): Default visual is TrueColor [ 18.593] (**) intel(0): Option "AccelMethod" "uxa" [ 18.593] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Desktop (GT1) [ 18.593] (**) intel(0): Relaxed fencing enabled [ 18.593] (**) intel(0): Wait on SwapBuffers? enabled [ 18.593] (**) intel(0): Triple buffering? enabled [ 18.593] (**) intel(0): Framebuffer tiled [ 18.593] (**) intel(0): Pixmaps tiled [ 18.593] (**) intel(0): 3D buffers tiled [ 18.593] (**) intel(0): SwapBuffers wait enabled ... [ 20.312] (II) Module fb: vendor="X.Org Foundation" [ 20.312] compiled for 1.13.0, module version = 1.0.0 [ 20.312] ABI class: X.Org ANSI C Emulation, version 0.4 [ 20.312] (II) Loading sub module "dri2" [ 20.312] (II) LoadModule: "dri2" [ 20.312] (II) Module "dri2" already built-in [ 20.312] (==) Depth 24 pixmap format is 32 bpp [ 20.312] (II) intel(0): [DRI2] Setup complete [ 20.312] (II) intel(0): [DRI2] DRI driver: i965 [ 20.312] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled [ 20.312] (II) UXA(0): Driver registered support for the following operations: [ 20.312] (II) solid [ 20.312] (II) copy [ 20.312] (II) composite (RENDER acceleration) [ 20.312] (II) put_image [ 20.312] (II) get_image [ 20.312] (==) intel(0): Backing store disabled [ 20.312] (==) intel(0): Silken mouse enabled [ 20.312] (II) intel(0): Initializing HW Cursor [ 20.312] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 20.313] (**) intel(0): DPMS enabled [ 20.313] (==) intel(0): Intel XvMC decoder enabled [ 20.313] (II) intel(0): Set up textured video [ 20.313] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 20.313] (II) intel(0): direct rendering: DRI2 Enabled [ 20.313] (==) intel(0): hotplug detection: "enabled" [ 20.332] (--) RandR disabled [ 20.335] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 20.335] (II) intel(0): Setting screen physical size to 508 x 285 [ 20.338] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 20.340] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 20.340] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.340] (II) LoadModule: "evdev" [ 20.340] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

Read the article

High Server Load cannot figure out why

- by Tim Bolton

My server is currently running CentOS 5.2, with WHM 11.34. Currently, we're at 6.43 to 12 for a load average. The sites that we're hosting are taking a lot time to respond and resolve. top doesn't show anything out of the ordinary and iftop doesn't show a lot of traffic. We have many resellers, and some not so good at writing code, how can we find the culprit? vmstat output: vmstat procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 0 2 84 78684 154916 1021080 0 0 72 274 0 14 6 3 80 12 0 top output (ordered by %CPU) top - 21:44:43 up 5 days, 10:39, 3 users, load average: 3.36, 4.18, 4.73 Tasks: 222 total, 3 running, 219 sleeping, 0 stopped, 0 zombie Cpu(s): 5.8%us, 2.3%sy, 0.2%ni, 79.6%id, 11.8%wa, 0.0%hi, 0.2%si, 0.0%st Mem: 2074580k total, 1863044k used, 211536k free, 174828k buffers Swap: 2040212k total, 84k used, 2040128k free, 987604k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 15930 mysql 15 0 138m 46m 4380 S 4 2.3 1:45.87 mysqld 21772 igniteth 17 0 23200 7152 3932 R 4 0.3 0:00.02 php 1586 root 10 -5 0 0 0 S 2 0.0 11:45.19 kjournald 21759 root 15 0 2416 1024 732 R 2 0.0 0:00.01 top 1 root 15 0 2156 648 560 S 0 0.0 0:26.31 init 2 root RT 0 0 0 0 S 0 0.0 0:00.35 migration/0 3 root 34 19 0 0 0 S 0 0.0 0:00.32 ksoftirqd/0 4 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 5 root RT 0 0 0 0 S 0 0.0 0:02.00 migration/1 6 root 34 19 0 0 0 S 0 0.0 0:00.11 ksoftirqd/1 7 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 8 root RT 0 0 0 0 S 0 0.0 0:01.29 migration/2 9 root 34 19 0 0 0 S 0 0.0 0:00.26 ksoftirqd/2 10 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/2 11 root RT 0 0 0 0 S 0 0.0 0:00.90 migration/3 12 root 34 19 0 0 0 R 0 0.0 0:00.20 ksoftirqd/3 13 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/3 top output (ordered by CPU time) top - 21:46:12 up 5 days, 10:41, 3 users, load average: 2.88, 3.82, 4.55 Tasks: 217 total, 1 running, 216 sleeping, 0 stopped, 0 zombie Cpu(s): 3.7%us, 2.0%sy, 2.0%ni, 67.2%id, 25.0%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 2074580k total, 1959516k used, 115064k free, 183116k buffers Swap: 2040212k total, 84k used, 2040128k free, 1090308k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ TIME COMMAND 32367 root 16 0 215m 212m 1548 S 0 10.5 62:03.63 62:03 tailwatchd 1586 root 10 -5 0 0 0 S 0 0.0 11:45.27 11:45 kjournald 1576 root 10 -5 0 0 0 S 0 0.0 2:37.86 2:37 kjournald 27722 root 16 0 2556 1184 800 S 0 0.1 1:48.94 1:48 top 15930 mysql 15 0 138m 46m 4380 S 4 2.3 1:48.63 1:48 mysqld 2932 root 34 19 0 0 0 S 0 0.0 1:41.05 1:41 kipmi0 226 root 10 -5 0 0 0 S 0 0.0 1:34.33 1:34 kswapd0 2671 named 25 0 74688 7400 2116 S 0 0.4 1:23.58 1:23 named 3229 root 15 0 10300 3348 2724 S 0 0.2 0:40.85 0:40 sshd 1580 root 10 -5 0 0 0 S 0 0.0 0:30.62 0:30 kjournald 1 root 17 0 2156 648 560 S 0 0.0 0:26.32 0:26 init 2616 root 15 0 1816 576 480 S 0 0.0 0:23.50 0:23 syslogd 1584 root 10 -5 0 0 0 S 0 0.0 0:18.67 0:18 kjournald 4342 root 34 19 27692 11m 2116 S 0 0.5 0:18.23 0:18 yum-updatesd 8044 bollingp 15 0 3456 2036 740 S 1 0.1 0:15.56 0:15 imapd 26 root 10 -5 0 0 0 S 0 0.0 0:14.18 0:14 kblockd/1 7989 gmailsit 16 0 3196 1748 736 S 0 0.1 0:10.43 0:10 imapd iostat -xtk 1 10 output [root@server1 tmp]# iostat -xtk 1 10 Linux 2.6.18-53.el5 12/18/2012 Time: 09:51:06 PM avg-cpu: %user %nice %system %iowait %steal %idle 5.83 0.19 2.53 11.85 0.00 79.60 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 1.37 118.83 18.70 54.27 131.47 692.72 22.59 4.90 67.19 3.10 22.59 sdb 0.35 39.33 20.33 61.43 158.79 403.22 13.75 5.23 63.93 3.77 30.80 Time: 09:51:07 PM avg-cpu: %user %nice %system %iowait %steal %idle 1.50 0.00 0.50 24.00 0.00 74.00 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 25.00 2.00 2.00 128.00 108.00 118.00 0.03 7.25 4.00 1.60 sdb 0.00 16.00 41.00 145.00 200.00 668.00 9.33 107.92 272.72 5.38 100.10 Time: 09:51:08 PM avg-cpu: %user %nice %system %iowait %steal %idle 2.00 0.00 1.50 29.50 0.00 67.00 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 95.00 3.00 33.00 12.00 480.00 27.33 0.07 1.72 1.31 4.70 sdb 0.00 14.00 1.00 228.00 4.00 960.00 8.42 143.49 568.01 4.37 100.10 Time: 09:51:09 PM avg-cpu: %user %nice %system %iowait %steal %idle 13.28 0.00 2.76 21.30 0.00 62.66 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 21.00 1.00 19.00 16.00 192.00 20.80 0.06 3.55 1.30 2.60 sdb 0.00 36.00 28.00 181.00 124.00 884.00 9.65 121.16 617.31 4.79 100.10 Time: 09:51:10 PM avg-cpu: %user %nice %system %iowait %steal %idle 4.74 0.00 1.50 25.19 0.00 68.58 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 20.00 3.00 15.00 12.00 136.00 16.44 0.17 7.11 3.11 5.60 sdb 0.00 0.00 103.00 60.00 544.00 248.00 9.72 52.35 545.23 6.14 100.10 Time: 09:51:11 PM avg-cpu: %user %nice %system %iowait %steal %idle 1.24 0.00 1.24 25.31 0.00 72.21 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 75.00 4.00 28.00 16.00 416.00 27.00 0.08 3.72 2.03 6.50 sdb 2.00 9.00 124.00 17.00 616.00 104.00 10.21 3.73 213.73 7.10 100.10 Time: 09:51:12 PM avg-cpu: %user %nice %system %iowait %steal %idle 1.00 0.00 0.75 24.31 0.00 73.93 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 24.00 1.00 9.00 4.00 132.00 27.20 0.01 1.20 1.10 1.10 sdb 4.00 40.00 103.00 48.00 528.00 212.00 9.80 105.21 104.32 6.64 100.20 Time: 09:51:13 PM avg-cpu: %user %nice %system %iowait %steal %idle 2.50 0.00 1.75 23.25 0.00 72.50 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 125.74 3.96 46.53 15.84 689.11 27.92 0.20 4.06 2.41 12.18 sdb 2.97 0.00 91.09 84.16 419.80 471.29 10.17 85.85 590.78 5.66 99.11 Time: 09:51:14 PM avg-cpu: %user %nice %system %iowait %steal %idle 0.75 0.00 0.50 24.94 0.00 73.82 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 88.00 1.00 7.00 4.00 380.00 96.00 0.04 4.38 3.00 2.40 sdb 3.00 7.00 111.00 44.00 540.00 208.00 9.65 18.58 581.79 6.46 100.10 Time: 09:51:15 PM avg-cpu: %user %nice %system %iowait %steal %idle 11.03 0.00 3.26 26.57 0.00 59.15 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 145.00 7.00 53.00 28.00 792.00 27.33 0.15 2.50 1.55 9.30 sdb 1.00 0.00 155.00 0.00 800.00 0.00 10.32 2.85 18.63 6.46 100.10 [root@server1 tmp]# MySQL Show Full Processlist mysql> show full processlist; +------+---------------+-----------+-----------------------+----------------+------+----------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ | Id | User | Host | db | Command | Time | State | Info | +------+---------------+-----------+-----------------------+----------------+------+----------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ | 1 | DB_USER_ONE | localhost | DB_ONE | Query | 3 | waiting for handler insert | INSERT DELAYED INTO defers (mailtime,msgid,email,transport_method,message,host,ip,router,deliveryuser,deliverydomain) VALUES(FROM_UNIXTIME('1355879748'),'1TivwL-0003y8-8l','[email protected]','remote_smtp','SMTP error from remote mail server after initial connection: host mx1.mail.tw.yahoo.com [203.188.197.119]: 421 4.7.0 [TS01] Messages from 75.125.90.146 temporarily deferred due to user complaints - 4.16.55.1; see http://postmaster.yahoo.com/421-ts01.html','mx1.mail.tw.yahoo.com','203.188.197.119','lookuphost','','') | | 2 | DELAYED | localhost | DB_ONE | Delayed insert | 52 | insert | | | 3 | DELAYED | localhost | DB_ONE | Delayed insert | 68 | insert | | | 911 | DELAYED | localhost | DB_ONE | Delayed insert | 99 | Waiting for INSERT | | | 993 | DB_USER_TWO | localhost | DB_TWO | Sleep | 832 | | NULL | | 994 | DB_USER_ONE | localhost | DB_ONE | Query | 185 | Locked | delete from failures where FROM_UNIXTIME(UNIX_TIMESTAMP(NOW())-1296000) > mailtime | | 1102 | DB_USER_THREE | localhost | DB_THREE | Query | 29 | NULL | commit | | 1249 | DB_USER_FOUR | localhost | DB_FOUR | Query | 13 | NULL | commit | | 1263 | root | localhost | DB_FIVE | Query | 0 | NULL | show full processlist | | 1264 | DB_USER_SIX | localhost | DB_SIX | Query | 3 | NULL | commit | +------+---------------+-----------+-----------------------+----------------+------+----------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ 10 rows in set (0.00 sec)

Read the article

Bacula windows client could not connect to Bacula director

- by pr0f-r00t

I have a Bacula server on my Linux Debian squeeze host (Bacula version 5.0.2) and a Bacula client on Windows XP SP3. On my network each client can see each other, can share files and can ping. On my local server I could run bconsole and the server responds but when I run bconsole or bat on my windows client the server does not respond. Here are my configuration files: bacula-dir.conf: # # Default Bacula Director Configuration file # # The only thing that MUST be changed is to add one or more # file or directory names in the Include directive of the # FileSet resource. # # For Bacula release 5.0.2 (28 April 2010) -- debian squeeze/sid # # You might also want to change the default email address # from root to your address. See the "mail" and "operator" # directives in the Messages resource. # Director { # define myself Name = nima-desktop-dir DIRport = 9101 # where we listen for UA connections QueryFile = "/etc/bacula/scripts/query.sql" WorkingDirectory = "/var/lib/bacula" PidDirectory = "/var/run/bacula" Maximum Concurrent Jobs = 1 Password = "Cv70F6pf1t6pBopT4vQOnigDrR0v3L" # Console password Messages = Daemon DirAddress = 127.0.0.1 # DirAddress = 72.16.208.1 } JobDefs { Name = "DefaultJob" Type = Backup Level = Incremental Client = nima-desktop-fd FileSet = "Full Set" Schedule = "WeeklyCycle" Storage = File Messages = Standard Pool = File Priority = 10 Write Bootstrap = "/var/lib/bacula/%c.bsr" } # # Define the main nightly save backup job # By default, this job will back up to disk in /nonexistant/path/to/file/archive/dir Job { Name = "BackupClient1" JobDefs = "DefaultJob" } #Job { # Name = "BackupClient2" # Client = nima-desktop2-fd # JobDefs = "DefaultJob" #} # Backup the catalog database (after the nightly save) Job { Name = "BackupCatalog" JobDefs = "DefaultJob" Level = Full FileSet="Catalog" Schedule = "WeeklyCycleAfterBackup" # This creates an ASCII copy of the catalog # Arguments to make_catalog_backup.pl are: # make_catalog_backup.pl <catalog-name> RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup.pl MyCatalog" # This deletes the copy of the catalog RunAfterJob = "/etc/bacula/scripts/delete_catalog_backup" Write Bootstrap = "/var/lib/bacula/%n.bsr" Priority = 11 # run after main backup } # # Standard Restore template, to be changed by Console program # Only one such job is needed for all Jobs/Clients/Storage ... # Job { Name = "RestoreFiles" Type = Restore Client=nima-desktop-fd FileSet="Full Set" Storage = File Pool = Default Messages = Standard Where = /nonexistant/path/to/file/archive/dir/bacula-restores } # job for vmware windows host Job { Name = "nimaxp-fd" Type = Backup Client = nimaxp-fd FileSet = "nimaxp-fs" Schedule = "WeeklyCycle" Storage = File Messages = Standard Pool = Default Write Bootstrap = "/var/bacula/working/rsys-win-www-1-fd.bsr" #Change this } # job for vmware windows host Job { Name = "arg-michael-fd" Type = Backup Client = nimaxp-fd FileSet = "arg-michael-fs" Schedule = "WeeklyCycle" Storage = File Messages = Standard Pool = Default Write Bootstrap = "/var/bacula/working/rsys-win-www-1-fd.bsr" #Change this } # List of files to be backed up FileSet { Name = "Full Set" Include { Options { signature = MD5 } # # Put your list of files here, preceded by 'File =', one per line # or include an external list with: # # File = <file-name # # Note: / backs up everything on the root partition. # if you have other partitions such as /usr or /home # you will probably want to add them too. # # By default this is defined to point to the Bacula binary # directory to give a reasonable FileSet to backup to # disk storage during initial testing. # File = /usr/sbin } # # If you backup the root directory, the following two excluded # files can be useful # Exclude { File = /var/lib/bacula File = /nonexistant/path/to/file/archive/dir File = /proc File = /tmp File = /.journal File = /.fsck } } # List of files to be backed up FileSet { Name = "nimaxp-fs" Enable VSS = yes Include { Options { signature = MD5 } File = "C:\softwares" File = C:/softwares File = "C:/softwares" } } # List of files to be backed up FileSet { Name = "arg-michael-fs" Enable VSS = yes Include { Options { signature = MD5 } File = "C:\softwares" File = C:/softwares File = "C:/softwares" } } # # When to do the backups, full backup on first sunday of the month, # differential (i.e. incremental since full) every other sunday, # and incremental backups other days Schedule { Name = "WeeklyCycle" Run = Full 1st sun at 23:05 Run = Differential 2nd-5th sun at 23:05 Run = Incremental mon-sat at 23:05 } # This schedule does the catalog. It starts after the WeeklyCycle Schedule { Name = "WeeklyCycleAfterBackup" Run = Full sun-sat at 23:10 } # This is the backup of the catalog FileSet { Name = "Catalog" Include { Options { signature = MD5 } File = "/var/lib/bacula/bacula.sql" } } # Client (File Services) to backup Client { Name = nima-desktop-fd Address = localhost FDPort = 9102 Catalog = MyCatalog Password = "_MOfxEuRzxijc0DIMcBqtyx9iW1tzE7V6" # password for FileDaemon File Retention = 30 days # 30 days Job Retention = 6 months # six months AutoPrune = yes # Prune expired Jobs/Files } # Client file service for vmware windows host Client { Name = nimaxp-fd Address = nimaxp FDPort = 9102 Catalog = MyCatalog Password = "Ku8F1YAhDz5EMUQjiC9CcSw95Aho9XbXailUmjOaAXJP" # password for FileDaemon File Retention = 30 days # 30 days Job Retention = 6 months # six months AutoPrune = yes # Prune expired Jobs/Files } # Client file service for vmware windows host Client { Name = arg-michael-fd Address = 192.168.0.61 FDPort = 9102 Catalog = MyCatalog Password = "b4E9FU6s/9Zm4BVFFnbXVKhlyd/zWxj0oWITKK6CALR/" # password for FileDaemon File Retention = 30 days # 30 days Job Retention = 6 months # six months AutoPrune = yes # Prune expired Jobs/Files } # # Second Client (File Services) to backup # You should change Name, Address, and Password before using # #Client { # Name = nima-desktop2-fd # Address = localhost2 # FDPort = 9102 # Catalog = MyCatalog # Password = "_MOfxEuRzxijc0DIMcBqtyx9iW1tzE7V62" # password for FileDaemon 2 # File Retention = 30 days # 30 days # Job Retention = 6 months # six months # AutoPrune = yes # Prune expired Jobs/Files #} # Definition of file storage device Storage { Name = File # Do not use "localhost" here Address = localhost # N.B. Use a fully qualified name here SDPort = 9103 Password = "Cj-gtxugC4dAymY01VTSlUgMTT5LFMHf9" Device = FileStorage Media Type = File } # Definition of DDS tape storage device #Storage { # Name = DDS-4 # Do not use "localhost" here # Address = localhost # N.B. Use a fully qualified name here # SDPort = 9103 # Password = "Cj-gtxugC4dAymY01VTSlUgMTT5LFMHf9" # password for Storage daemon # Device = DDS-4 # must be same as Device in Storage daemon # Media Type = DDS-4 # must be same as MediaType in Storage daemon # Autochanger = yes # enable for autochanger device #} # Definition of 8mm tape storage device #Storage { # Name = "8mmDrive" # Do not use "localhost" here # Address = localhost # N.B. Use a fully qualified name here # SDPort = 9103 # Password = "Cj-gtxugC4dAymY01VTSlUgMTT5LFMHf9" # Device = "Exabyte 8mm" # MediaType = "8mm" #} # Definition of DVD storage device #Storage { # Name = "DVD" # Do not use "localhost" here # Address = localhost # N.B. Use a fully qualified name here # SDPort = 9103 # Password = "Cj-gtxugC4dAymY01VTSlUgMTT5LFMHf9" # Device = "DVD Writer" # MediaType = "DVD" #} # Generic catalog service Catalog { Name = MyCatalog # Uncomment the following line if you want the dbi driver # dbdriver = "dbi:sqlite3"; dbaddress = 127.0.0.1; dbport = dbname = "bacula"; dbuser = ""; dbpassword = "" } # Reasonable message delivery -- send most everything to email address # and to the console Messages { Name = Standard # # NOTE! If you send to two email or more email addresses, you will need # to replace the %r in the from field (-f part) with a single valid # email address in both the mailcommand and the operatorcommand. # What this does is, it sets the email address that emails would display # in the FROM field, which is by default the same email as they're being # sent to. However, if you send email to more than one address, then # you'll have to set the FROM address manually, to a single address. # for example, a '[email protected]', is better since that tends to # tell (most) people that its coming from an automated source. # mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"$Bacula$ \<%r\>\" -s \"Bacula: %t %e of %c %l\" %r" operatorcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"$Bacula$ \<%r\>\" -s \"Bacula: Intervention needed for %j\" %r" mail = root@localhost = all, !skipped operator = root@localhost = mount console = all, !skipped, !saved # # WARNING! the following will create a file that you must cycle from # time to time as it will grow indefinitely. However, it will # also keep all your messages if they scroll off the console. # append = "/var/lib/bacula/log" = all, !skipped catalog = all } # # Message delivery for daemon messages (no job). Messages { Name = Daemon mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"$Bacula$ \<%r\>\" -s \"Bacula daemon message\" %r" mail = root@localhost = all, !skipped console = all, !skipped, !saved append = "/var/lib/bacula/log" = all, !skipped } # Default pool definition Pool { Name = Default Pool Type = Backup Recycle = yes # Bacula can automatically recycle Volumes AutoPrune = yes # Prune expired volumes Volume Retention = 365 days # one year } # File Pool definition Pool { Name = File Pool Type = Backup Recycle = yes # Bacula can automatically recycle Volumes AutoPrune = yes # Prune expired volumes Volume Retention = 365 days # one year Maximum Volume Bytes = 50G # Limit Volume size to something reasonable Maximum Volumes = 100 # Limit number of Volumes in Pool } # Scratch pool definition Pool { Name = Scratch Pool Type = Backup } # # Restricted console used by tray-monitor to get the status of the director # Console { Name = nima-desktop-mon Password = "-T0h6HCXWYNy0wWqOomysMvRGflQ_TA6c" CommandACL = status, .status } bacula-fd.conf on client: # # Default Bacula File Daemon Configuration file # # For Bacula release 5.0.3 (08/05/10) -- Windows MinGW32 # # There is not much to change here except perhaps the # File daemon Name # # # "Global" File daemon configuration specifications # FileDaemon { # this is me Name = nimaxp-fd FDport = 9102 # where we listen for the director WorkingDirectory = "C:\\Program Files\\Bacula\\working" Pid Directory = "C:\\Program Files\\Bacula\\working" # Plugin Directory = "C:\\Program Files\\Bacula\\plugins" Maximum Concurrent Jobs = 10 } # # List Directors who are permitted to contact this File daemon # Director { Name = Nima-desktop-dir Password = "Cv70F6pf1t6pBopT4vQOnigDrR0v3L" } # # Restricted Director, used by tray-monitor to get the # status of the file daemon # Director { Name = nimaxp-mon Password = "q5b5g+LkzDXorMViFwOn1/TUnjUyDlg+gRTBp236GrU3" Monitor = yes } # Send all messages except skipped files back to Director Messages { Name = Standard director = Nima-desktop = all, !skipped, !restored } I have checked my firewall and disabled the firewall but it doesn't work.

Read the article

Developer Dashboard in SharePoint 2010

- by jcortez

Introducing the Developer Dashboard As a SharePoint developer (or IT Professional), how many times have you had the pleasure of figuring out why a particular page on your site is taking too long to render? I'm sure one of the techniques you have employed in troubleshooting is the process of elimination - removing individual web parts from the page hoping to identify which web part is misbehaving. One of the new features of SharePoint 2010 is the Developer Dashboard. This dashboard provides tracing and performance information that can be useful when you are trying to troubleshoot pages that are loading too slow. The Developer Dashboard is turned off by default and I'll go over 3 different ways to display it. Here is a screenshot of what the Developer Dashboard looks like when displayed at the bottom of the page: You can see on the left side the different events that fired during the page processing pipeline and how long these events took. This is where you will see individual web parts being processed and how long it took to complete (obviously the kind of processing depends on what the web part does). On the right side you would see the different database calls issued through the SharePoint Object Model to process the page. You will notice that each of these database queries are actually a hyperlink and clicking on it displays a pop-up window that shows the actual SQL Query Text, the Call Stack that triggered the database call, and the IO statistics of that query. Enabling the Developer Dashboard Option 1: Managed Code The Developer Dashboard is a farm-wide setting and the code above won't work if it is used within a web part hosted on any non-Central Admin site. The SPDeveloperDashboardLevel enum has three possible values: On, Off, and OnDemand. Setting it to On will always display the Developer Dashboard at the bottom of the page. Setting it Off will hide the Developer Dashboard. Setting it to OnDemand will add an icon at the top right corner of the page (see screenshot below) where a Site Collection Admin can toggle the display of the Developer Dashboard for a particular site collection. In my opinion, OnDemand is the best setting when troubleshooting a page or during development since a Site Collection Admin can turn it on or off and for a particular site only. The first cool thing about this is that the Site Collection Admin that turned it on will be the only one to see the Developer Dashboard output. Everyday users won't see the Developer Dashboard output even if it was turned on by a Site Collection Admin. If you need more flexibility on who gets to see the Developer Dashboard output, you can set the SPDeveloperDashboardSettings.RequiredPermissions to control which group of users will have the permission to see the output. Option 2: Using stsadm Using stsadm, you can run the following command to configure the Developer Dashboard: STSADM –o setproperty –pn developer-dashboard –pv OnDemand To successfully execute this command, be sure you that are running as a Farm Admin. Option 3: Using PowerShell For all scripts in SharePoint 2010, I prefer writing them as PowerShell scripts. Though the stsadm command is less verbose, the PowerShell equivalent is pretty straightforward and uses the SharePoint Object Model: You can of course parameterized the value that gets assigned to the DisplayLevel property so you can turn it On, Off or OnDemand depending on the parameter. Events and the Developer Dashboard Now, don't assume that all the code inside your web part or page will show up in the Developer Dashboard complete with all the great troubleshooting information. Only a finite set of events are monitored by default (for a web part it will events in the base web part class). Let's say you have a click event that could take some time, for example a web service call. And you want to include troubleshooting information for this event in the Developer Dashboard. Enter SPMonitoredScope which is also a new feature in SharePoint 2010. In SharePoint 2010, everything is executed within a "Monitored Scope". And each scope has a set of "Monitors" that measures and counts calls and timings which appears in the Developer Dashboard. Below is an example on how to get your custom code to get included in the Developer Dashboard by wrapping it inside a new monitored scope: The code above would include your new scope "My long web service call" into the Developer Dashboard and would log the time it took to complete processing. In my opinion, wrapping your custom code in a SPMonitoredScope is a SharePoint development best practice since it provides you visibility and a better understanding on the performance of your components.

Read the article

Ubuntu 14.04:LTS , HPLIP loses USB connection to HP laserjet

- by Gareth

This is my first post, so please let me know if i have inadvertanly broken any rules. Problem There seems to be a problem with HPLIP and USB connections in ubuntu 14.04LTS. After upgrading i managed to get the printing to work but today it has broken. Initial Issue (Solved) After upgrading to unbutntu 14.04 LTS my printer lHP LaserJet 1018 stopped printing (code=12) Looking through the Forumsthere are several issues with printitng and HPLIP so I was able to troubleshoot this. The steps I took were : Reran HPdoctor Ran hp-check Un-installed and installed the latest version of HPLIP (3.14.4) Checked the USB connections lsusb and lsusb-v Re-ran hpcheck Removed the printer from HPLIP Re-ran hpcheck Manually configued HPLIP to the printer hp-setup-g <xxx:yyy> And this worked HPLIP was able to see the printer in the USB , test page printed and was happily working for a few weeks. Current Issue Printer Not working However today my wife complains the printer is not working and checking see that although HPLIP has the same error code and did not seem to be able to see the printer although running lsusb could see the printer. Initially thought this may be due to usb given a new bus/device after being turned on and off and went to repeat the steps above at the moment still seeing an error in that the HPLIP is complaining that it cannot see the device **error: Device not found. Please make sure your printer is properly connected and powered-on.** current Observations lsusb output ## Bus 002 Device 007: ID 03f0:4117 Hewlett-Packard LaserJet 1018 sudo hp-check output *> "duan@duan-Lenovo-B550:~$ sudo hp-check [sudo] password for duan: Saving output in log file: /home/duan/hp-check.log HP Linux Imaging and Printing System (ver. 3.14.4) Dependency/Version Check Utility ver. 15.1 Copyright (c) 2001-13 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Full Output output of hp-setup -g 002:007 window box "device not found please make sure your printer is properly connected and powered on" duan@duan-Lenovo-B550:~$ sudo hp-setup -g 002:007 [sudo] password for duan: > HP Linux Imaging and Printing System (ver. 3.14.4) Printer/Fax Setup > Utility ver. 9.0 > > Copyright (c) 2001-13 Hewlett-Packard Development Company, LP This > software comes with ABSOLUTELY NO WARRANTY. This is free software, and > you are welcome to distribute it under certain conditions. See COPYING > file for more details. > > hp-setup[18461]: debug: param=002:007 hp-setup[18461]: debug: > selected_device_name=None Fontconfig error: > "/etc/fonts/conf.d/65-khmer.conf", line 14: out of memory Fontconfig > error: "/etc/fonts/conf.d/65-khmer.conf", line 23: out of memory > Fontconfig error: "/etc/fonts/conf.d/65-khmer.conf", line 32: out of > memory hp-setup[18461]: debug: Sys.argv=['/usr/bin/hp-setup', '-g', > '002:007'] printer_name=None param=002:007 jd_port=1 device_uri=None > remove=False Searching for device... hp-setup[18461]: debug: Trying > USB with bus=002 dev=007... hp-setup[18461]: debug: Not found. > hp-setup[18461]: debug: Trying serial number 002:007 hp-setup[18461]: > debug: Probing bus: usb hp-setup[18461]: debug: Probing bus: par > error: Device not found. Please make sure your printer is properly > connected and powered-on. hp-setup[18461]: debug: Starting GUI loop. .. USB lead Works with the Windows 7 laptop Printer Works with windows 7 laptop Questions Is this a Bug with HPLIP or an issue with laptop/printer? Supplementary question if it is a bug what information is needed and where should it be sent ? Any suggestions on how to get the printer to work correctly with Ubuntu 14.04LTS/HPLIP 13.4.3 so that it stays working ?

Read the article

AuthnRequest Settings in OIF / SP

- by Damien Carru

In this article, I will list the various OIF/SP settings that affect how an AuthnRequest message is created in OIF in a Federation SSO flow. The AuthnRequest message is used by an SP to start a Federation SSO operation and to indicate to the IdP how the operation should be executed: How the user should be challenged at the IdP Whether or not the user should be challenged at the IdP, even if a session already exists at the IdP for this user Which NameID format should be requested in the SAML Assertion Which binding (Artifact or HTTP-POST) should be requested from the IdP to send the Assertion Which profile should be used by OIF/SP to send the AuthnRequest message Enjoy the reading! Protocols The SAML 2.0, SAML 1.1 and OpenID 2.0 protocols define different message elements and rules that allow an administrator to influence the Federation SSO flows in different manners, when the SP triggers an SSO operation: SAML 2.0 allows extensive customization via the AuthnRequest message SAML 1.1 does not allow any customization, since the specifications do not define an authentication request message OpenID 2.0 allows for some customization, mainly via the OpenID 2.0 extensions such as PAPE or UI SAML 2.0 OIF/SP allows the customization of the SAML 2.0 AuthnRequest message for the following elements: ForceAuthn: Boolean indicating whether or not the IdP should force the user for re-authentication, even if the user has still a valid session By default set to false IsPassive Boolean indicating whether or not the IdP is allowed to interact with the user as part of the Federation SSO operation. If false, the Federation SSO operation might result in a failure with the NoPassive error code, because the IdP will not have been able to identify the user By default set to false RequestedAuthnContext Element indicating how the user should be challenged at the IdP If the SP requests a Federation Authentication Method unknown to the IdP or for which the IdP is not configured, then the Federation SSO flow will result in a failure with the NoAuthnContext error code By default missing NameIDPolicy Element indicating which NameID format the IdP should include in the SAML Assertion If the SP requests a NameID format unknown to the IdP or for which the IdP is not configured, then the Federation SSO flow will result in a failure with the InvalidNameIDPolicy error code If missing, the IdP will generally use the default NameID format configured for this SP partner at the IdP By default missing ProtocolBinding Element indicating which SAML binding should be used by the IdP to redirect the user to the SP with the SAML Assertion Set to Artifact or HTTP-POST By default set to HTTP-POST OIF/SP also allows the administrator to configure the server to: Set which binding should be used by OIF/SP to redirect the user to the IdP with the SAML 2.0 AuthnRequest message: Redirect or HTTP-POST By default set to Redirect Set which binding should be used by OIF/SP to redirect the user to the IdP during logout with SAML 2.0 Logout messages: Redirect or HTTP-POST By default set to Redirect SAML 1.1 The SAML 1.1 specifications do not define a message for the SP to send to the IdP when a Federation SSO operation is started. As such, there is no capability to configure OIF/SP on how to affect the start of the Federation SSO flow. OpenID 2.0 OpenID 2.0 defines several extensions that can be used by the SP/RP to affect how the Federation SSO operation will take place: OpenID request: mode: String indicating if the IdP/OP can visually interact with the user checkid_immediate does not allow the IdP/OP to interact with the user checkid_setup allows user interaction By default set to checkid_setup PAPE Extension: max_auth_age : Integer indicating in seconds the maximum amount of time since when the user authenticated at the IdP. If MaxAuthnAge is bigger that the time since when the user last authenticated at the IdP, then the user must be re-challenged. OIF/SP will set this attribute to 0 if the administrator configured ForceAuthn to true, otherwise this attribute won't be set Default missing preferred_auth_policies Contains a Federation Authentication Method Element indicating how the user should be challenged at the IdP By default missing Only specified in the OpenID request if the IdP/OP supports PAPE in XRDS, if OpenID discovery is used. UI Extension Popup mode Boolean indicating the popup mode is enabled for the Federation SSO By default missing Language Preference String containing the preferred language, set based on the browser's language preferences. By default missing Icon: Boolean indicating if the icon feature is enabled. In that case, the IdP/OP would look at the SP/RP XRDS to determine how to retrieve the icon By default missing Only specified in the OpenID request if the IdP/OP supports UI Extenstion in XRDS, if OpenID discovery is used. ForceAuthn and IsPassive WLST Command OIF/SP provides the WLST configureIdPAuthnRequest() command to set: ForceAuthn as a boolean: In a SAML 2.0 AuthnRequest, the ForceAuthn field will be set to true or false In an OpenID 2.0 request, if ForceAuthn in the configuration was set to true, then the max_auth_age field of the PAPE request will be set to 0, otherwise, max_auth_age won't be set IsPassive as a boolean: In a SAML 2.0 AuthnRequest, the IsPassive field will be set to true or false In an OpenID 2.0 request, if IsPassive in the configuration was set to true, then the mode field of the OpenID request will be set to checkid_immediate, otherwise set to checkid_setup Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso"> <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer> <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> Let's configure OIF/SP for that IdP Partner, so that the SP will require the IdP to re-challenge the user, even if the user is already authenticated: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the configureIdPAuthnRequest() command:configureIdPAuthnRequest(partner="AcmeIdP", forceAuthn="true") Exit the WLST environment:exit() After the changes, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ForceAuthn="true" ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso"> <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer> <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> To display or delete the ForceAuthn/IsPassive settings, perform the following operatons: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the configureIdPAuthnRequest() command: To display the ForceAuthn/IsPassive settings on the partnerconfigureIdPAuthnRequest(partner="AcmeIdP", displayOnly="true") To delete the ForceAuthn/IsPassive settings from the partnerconfigureIdPAuthnRequest(partner="AcmeIdP", delete="true") Exit the WLST environment:exit() Requested Fed Authn Method In my earlier "Fed Authentication Method Requests in OIF / SP" article, I discussed how OIF/SP could be configured to request a specific Federation Authentication Method from the IdP when starting a Federation SSO operation, by setting elements in the SSO request message. WLST Command The OIF WLST commands that can be used are: setIdPPartnerProfileRequestAuthnMethod() which will configure the requested Federation Authentication Method in a specific IdP Partner Profile, and accepts the following parameters: partnerProfile: name of the IdP Partner Profile authnMethod: the Federation Authentication Method to request displayOnly: an optional parameter indicating if the method should display the current requested Federation Authentication Method instead of setting it delete: an optional parameter indicating if the method should delete the current requested Federation Authentication Method instead of setting it setIdPPartnerRequestAuthnMethod() which will configure the specified IdP Partner entry with the requested Federation Authentication Method, and accepts the following parameters: partner: name of the IdP Partner authnMethod: the Federation Authentication Method to request displayOnly: an optional parameter indicating if the method should display the current requested Federation Authentication Method instead of setting it delete: an optional parameter indicating if the method should delete the current requested Federation Authentication Method instead of setting it This applies to SAML 2.0 and OpenID 2.0 protocols. See the "Fed Authentication Method Requests in OIF / SP" article for more information. Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso"> <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer> <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> Let's configure OIF/SP for that IdP Partner, so that the SP will request the IdP to use a mechanism mapped to the urn:oasis:names:tc:SAML:2.0:ac:classes:X509 Federation Authentication Method to authenticate the user: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setIdPPartnerRequestAuthnMethod() command:setIdPPartnerRequestAuthnMethod("AcmeIdP", "urn:oasis:names:tc:SAML:2.0:ac:classes:X509") Exit the WLST environment:exit() After the changes, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso"> <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer> <samlp:NameIDPolicy AllowCreate="true"/> <samlp:RequestedAuthnContext Comparison="minimum"> <saml:AuthnContextClassRef xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion"> urn:oasis:names:tc:SAML:2.0:ac:classes:X509 </saml:AuthnContextClassRef> </samlp:RequestedAuthnContext></samlp:AuthnRequest> NameID Format The SAML 2.0 protocol allows for the SP to request from the IdP a specific NameID format to be used when the Assertion is issued by the IdP. Note: SAML 1.1 and OpenID 2.0 do not provide such a mechanism Configuring OIF The administrator can configure OIF/SP to request a NameID format in the SAML 2.0 AuthnRequest via: The OAM Administration Console, in the IdP Partner entry The OIF WLST setIdPPartnerNameIDFormat() command that will modify the IdP Partner configuration OAM Administration Console To configure the requested NameID format via the OAM Administration Console, perform the following steps: Go to the OAM Administration Console: http(s)://oam-admin-host:oam-admin-port/oamconsole Navigate to Identity Federation -> Service Provider Administration Open the IdP Partner you wish to modify In the Authentication Request NameID Format dropdown box with one of the values None The NameID format will be set Default Email Address The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress X.509 Subject The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:X509SubjectName Windows Name Qualifier The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:WindowsDomainQualifiedName Kerberos The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:kerberos Transient The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:transient Unspecified The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified Custom In this case, a field would appear allowing the administrator to indicate the custom NameID format to use The NameID format will be set to the specified format Persistent The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:persistent I selected Email Address in this example Save WLST Command To configure the requested NameID format via the OIF WLST setIdPPartnerNameIDFormat() command, perform the following steps: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setIdPPartnerNameIDFormat() command:setIdPPartnerNameIDFormat("PARTNER", "FORMAT", customFormat="CUSTOM") Replace PARTNER with the IdP Partner name Replace FORMAT with one of the following: orafed-none The NameID format will be set Default orafed-emailaddress The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress orafed-x509 The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:X509SubjectName orafed-windowsnamequalifier The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:WindowsDomainQualifiedName orafed-kerberos The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:kerberos orafed-transient The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:transient orafed-unspecified The NameID format will be set urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified orafed-custom In this case, a field would appear allowing the administrator to indicate the custom NameID format to use The NameID format will be set to the specified format orafed-persistent The NameID format will be set urn:oasis:names:tc:SAML:2.0:nameid-format:persistent customFormat will need to be set if the FORMAT is set to orafed-custom An example would be:setIdPPartnerNameIDFormat("AcmeIdP", "orafed-emailaddress") Exit the WLST environment:exit() Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso"> <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer> <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> After the changes performed either via the OAM Administration Console or via the OIF WLST setIdPPartnerNameIDFormat() command where Email Address would be requested as the NameID Format, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ForceAuthn="false" IsPassive="false" ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso"> <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer> <samlp:NameIDPolicy Format="urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress" AllowCreate="true"/></samlp:AuthnRequest> Protocol Binding The SAML 2.0 specifications define a way for the SP to request which binding should be used by the IdP to redirect the user to the SP with the SAML 2.0 Assertion: the ProtocolBinding attribute indicates the binding the IdP should use. It is set to: Either urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST for HTTP-POST Or urn:oasis:names:tc:SAML:2.0:bindings:Artifact for Artifact The SAML 2.0 specifications also define different ways to redirect the user from the SP to the IdP with the SAML 2.0 AuthnRequest message, as the SP can send the message: Either via HTTP Redirect Or HTTP POST (Other bindings can theoretically be used such as Artifact, but these are not used in practice) Configuring OIF OIF can be configured: Via the OAM Administration Console or the OIF WLST configureSAMLBinding() command to set the Assertion Response binding to be used Via the OIF WLST configureSAMLBinding() command to indicate how the SAML AuthnRequest message should be sent Note: the binding for sending the SAML 2.0 AuthnRequest message will also be used to send the SAML 2.0 LogoutRequest and LogoutResponse messages. OAM Administration Console To configure the SSO Response/Assertion Binding via the OAM Administration Console, perform the following steps: Go to the OAM Administration Console: http(s)://oam-admin-host:oam-admin-port/oamconsole Navigate to Identity Federation -> Service Provider Administration Open the IdP Partner you wish to modify Check the "HTTP POST SSO Response Binding" box to request the IdP to return the SSO Response via HTTP POST, otherwise uncheck it to request artifact Save WLST Command To configure the SSO Response/Assertion Binding as well as the AuthnRequest Binding via the OIF WLST configureSAMLBinding() command, perform the following steps: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the configureSAMLBinding() command:configureSAMLBinding("PARTNER", "PARTNER_TYPE", binding, ssoResponseBinding="httppost") Replace PARTNER with the Partner name Replace PARTNER_TYPE with the Partner type (idp or sp) Replace binding with the binding to be used to send the AuthnRequest and LogoutRequest/LogoutResponse messages (should be httpredirect in most case; default) httppost for HTTP-POST binding httpredirect for HTTP-Redirect binding Specify optionally ssoResponseBinding to indicate how the SSO Assertion should be sent back httppost for HTTP-POST binding artifactfor for Artifact binding An example would be:configureSAMLBinding("AcmeIdP", "idp", "httpredirect", ssoResponseBinding="httppost") Exit the WLST environment:exit() Test In this test, OIF/SP is integrated with a remote SAML 2.0 IdP Partner, with the OOTB configuration which requests HTTP-POST from the IdP to send the SSO Assertion. Based on this setup, when OIF/SP starts a Federation SSO flow, the following SAML 2.0 AuthnRequest would be generated: <samlp:AuthnRequest ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ID="id-E4BOT7lwbYK56lO57dBaqGUFq01WJSjAHiSR60Q4" Version="2.0" IssueInstant="2014-04-01T21:39:14Z" Destination="https://acme.com/saml20/sso"> <saml:Issuer Format="urn:oasis:names:tc:SAML:2.0:nameid-format:entity">https://sp.com/oam/fed</saml:Issuer> <samlp:NameIDPolicy AllowCreate="true"/></samlp:AuthnRequest> In the next article, I will cover the various crypto configuration properties in OIF that are used to affect the Federation SSO exchanges.Cheers,Damien Carru

Search Results

Search found 16336 results on 654 pages for 'device admin'.

Page 126/654 | < Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133 | Next Page >

- by yosh

- by brechtvhb

- by Cameron

- by Tom

- by user1990525

- by Souta

- by Supercell

- by Traci

- by ScottGu

- by netllama

- by PartySoft

- by Branden Martin

- by Forkrul Assail

- by mattalexx

- by Rick Strahl

- by ThePosey

- by Steve Hawkins

- by Pfeffer

- by GirishMoodalbail-Oracle

- by MeanEYE

- by Tim Bolton

- by pr0f-r00t

- by jcortez

- by Gareth

- by Damien Carru

< Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133 | Next Page >