Search Results

Search found 4360 results on 175 pages for 'dual licensing'.

Page 126/175 | < Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >

• How to force a resolution in linux?

  - by hi

  I have a HP LP3065 that requires a dual link dvi cable to go up to 2560x1600 resolution. However, I do not have that cable, but I want to use 1920x1200 resolution. However, my nVidia Display Settings (also system display settings) will only go up to 1280x1024, which looks horribly pixelated on the 30". How do I force the 1920x1200 resolution? I tried adding the mode into my xorg.conf file, but it still would not take it. I know my vid card can do 1920x1200 since it works on the 24" monitor with the same dvi cable. Here are my specs: Fedora 12 Nvidia Quadro NVS 420 Intel Xenon E5530 cpu 6gig memory Thanks

  Read the article

• Mapping of memory addresses to physical modules in Windows XP

  - by Josef Grahn

  I plan to run 32-bit Windows XP on a workstation with dual processors, based on Intel's Nehalem microarchitecture, and triple channel RAM. Even though XP is limited to 4 GB of RAM, my understanding is that it will function with more than 4 GB installed, but will only expose 4 GB (or slightly less). My question is: Assuming that 6 GB of RAM is installed in six 1 GB modules, which physical 4 GB will Windows actually map into its address space? In particular: Will it use all six 1 GB modules, taking advantage of all memory channels? (My guess is yes, and that the mapping to individual modules within a group happens in hardware.) Will it map 2 GB of address space to each of the two NUMA nodes (as each processor has it's own memory interface), or will one processor get fast access to 3 GB of RAM, while the other only has 1 GB? Thanks!

  Read the article

• My Intel Core i3 frequently shuts down due to "Processor Thermal Trip error"

  - by explorest

  My Desktop PC running Windows 7 on Intel Core i3 dual processor machine started shutting down during the boot process a couple of days ago. I left it alone for about 48 hours and tried again. The boot process informed me about Processor Thermal Trip as being the cause of boot failures and suggested a Windows recovery process. I went through the recovery process which completed without problems. The PC booted normally and Windows 7 worked as expected but after 10 minutes it again tripped and now whenever I start it, it shuts down during the boot process. What should I do next?... is there a boot menu / setup settings that needs to be adjusted to avoid it... Or is there a hardware problem (which seems unlikely as the machine occasionally boots perfectly )?

  Read the article

• partitioning problems

  - by Remus Rigo

  I had on my laptop a dual system (Ubuntu 11.04 and Windows 7) and someway the partitions messed-up. Windows stopped from booting, I just got a blinking cursor, but Ubuntu worked fine. I tried to fix the windows boot (fixmbr, fixboot, bootsect /nt60 C:/....) but now grub was overwritten and I have no OS. Finally I formatted the hdd (low format), installed Windows, partition hdd with paragon partition manager and now I want to install Ubuntu, but Ubuntu sees an empty hdd, weird, can anyone tell me what can I do? EDIT: I have created: partition 1: 100MB ntfs - windows reserved (drive B) partition 2: 50GB ntfs win 7 (drive C) partition 3: 50GB ext3 linux partition 4: 'the rest' ntfs for data (drive E) (the swap i will create after)

  Read the article

• How can I set my wireless router to run on a time schedule?

  - by Joshua Robison

  I have a Buffalo AirStation WZR-HP-G301NH I am able to access it's settings via 192.168.11.1 I'm connecting wirelessly with toshiba i686 laptop on Linux Mint Debian with service pack 3 and i686 dual core kernel This is just my home network but I know that there must be a way for large industries to shut their networks down or lock out their network access temporarily based on a time schedule, automatically. Like mon - fri the network provides access from 8am to 10pm and then automatically shuts down. I want this to affect all the computers accessing this netowork... basically all my families computers so that the internet just automatically shuts down at bedtime. I am running Linux Mint Debian and so maybe I need to make a cron job or something but does anyone know how big industries implement this and how I can do it privately? TIA

  Read the article

• What could cause my LAN Pings be greater than 100ms?

  - by James Holland

  I have 2 servers (Both: Windows Server 2008, Dual Xeon 2.8Ghz, 32GB RAM, 8 x 15k SAS Drives). One of them is a DC / Web server / Exchange Server, the other is a SQL Server (2008). I have a 48 port Netgear GS748T Gigabit switch. When I ping from server to server, I get ping times <1ms, great, but when I ping from a PC, I get varying pings from the occasional <1ms to 500ms!! If I log into either server and look at Task Manager, CPU usage peaks at 20%, memory usage is 100%, but I am led to believe this is normal as Exchange will just use as much as you have, and release it when requested. Network usage peaks at 1%. I really don't understand how the ping can vary that much. I know I am giving very little info, but this is all I know, I apologise, but can anyone help? In response to question, I have pinged by both IP address and hostname, no difference in ping times.

  Read the article

• Increase text size in Ubuntu 10.04 due to having large resolution/monitors

  - by Sridhar Ratnakumar

  I have 24" dual monitors with 1920x1080 resolution on both of them. Consequently the text appears so small. I use the following text-intensive applications frequently: Web browser (Google Chrome) IDE (Komodo) Terminal (Gnome Terminal) Email (Thunderbird) I can configure text size on IDE, Terminal and Email. But for Chrome, it is not a good idea to set proportional font size because often one wants to see the entire (not just proportional fonts) site to be zoomed. So I am asking: Is it possible to increase DPI in Ubuntu (much like on Windows) so as to increase the text size across all apps? OR Is it possible to set permanent 'zoom' in Google Chrome, using a third-party extension maybe? I am using Ubuntu 10.04 (Lucid Lynx)

  Read the article

• Ubuntu 10.04 install - frozen at splash, no errors

  - by Andrew Bolster

  Has anyone else come across this? After about as much of a fresh install as i can muster without buying new drives, and after walking through the amd64 alternate install with ease, and after a little 'pre-splash' screen where the orange dots under the (very sexy) new ubuntu logo blink away, I'm left with a vista of purple hues and logo plonked in the middle, with the dots not going anywhere. I was at this same position last night at 3 in the morning, left it lying overnight, and nothing had changed, so I'm pretty sure its frozen, the virtual terminals are not accessible, ie, c+a+F1 etc does nothing, but when i go in and inspect /var/log/* in the recovery console by booting off the installation cd, no errors, no complaints, no problems. I'm at my wits end and am just about ready to try anything. If this was on SO I'd be bountying, but if anyone can help you'll just have to cope with my thanks! Additional Details on my blog and my first attempt at asking for help Update: I can reasonably say it is not a hardware fault, as a full install of 9.10 with dual screen nvidia xinemara indicate that nothing is wonky

  Read the article

• How do I use Compiz on Linux to achieve what WinSplit revolution does on Windows?

  - by Bryce Thomas

  Hi there, I've used WinSplit Revolution for quite some time on Windows and have become attached to it. I'm now trying out a Linux OS (Ubuntu 10.04) and would really like to get the same functionality back again. After searching on the net I found a "grid" plugin (http://wiki.compiz.org/Plugins/Grid) for compiz which says that it was inspired by WinSplit revolution. I haven't installed the Grid plugin yet, because under the install section on that page, it says "Note that grid is now included in compiz so you're unlikely to need to fetch from git unless you've an old version of compiz", which would seem to suggest that the grid functionality has now been built into compiz somewhere. The thing is, I don't know where to find it in the CompizConfig Settings Manager nor how to set it up. All I want to have happen is that I get identical functionality to WinSplit revolution, where I press Ctrl + Alt + [some numpad key] to position a window on a screen and press Ctrl + Alt + [left or right arrow] to shift a window between dual screens.

  Read the article

• Please advise on VPS config choice (with SQL Server Express)

  - by tjeuten

  Hi all, I might be interested in getting a VPS hosting plan for some small personal sites and .NET projects. Was thinking of Softsys Bronze Plan, as my current shared host plan is with them too. The stuff I want to host has grown beyond the capabilities of a Shared hosting plan, and I also want more control over the IIS/ASP.NET configuration, that's why I'm considering VPS. The main config details would be: Hyper-V 30 GB of diskspace 1 GB of RAM More info here: http://www.softsyshosting.com/Windows-VPS-HyperV.aspx Does anyone have experience with this plan (or something similar from another host), and maybe could answer these couple of questions: Bronze has a total diskspace of 30GB. Is the OS part of this quota or not ? If so, how much does a base configuration with Windows 2008 take up in diskspace ? Would you advise Windows 2008 R2 or Normal. Or would you advise to use Windows 2003 with this config. I'm planning on running a SQL Server Express install too. Would 1 GB of RAM be enough for both the Windows 2008 (R2) and SQL Express. The database load will not be that very high (a couple of 1000 records returned each day). The DB will most likely be far away from the 4GB limit, that's why I'd go for a SQL Express instead of paying extra licensing costs for a SQL Web install. But I'm more concerned about performance. Would you recommend Softsys as a VPS host ? I've been with them for one year for my Shared hosting plan, and have no complaints so far. Also, as I have no VPS experience, what are the pitfalls I need to be aware of, in terms of performance mainly, but maybe in other areas too ? Mathieu

  Read the article

• Divide bootloader from dualboot with Windows 7 and Windows XP

  - by manwithproblem

  My problem is the following: I have a dual boot running on my pc. I installed a programme called "Keriver", it automatically installs GRUB, too. When I start my PC, the first thing you see is GRUB. You can choose between "Boot normal" "Take snapshot with Keriver" "Boot Windows" If you select "Windows" or "Boot normal" it calls the Windows 7 Bootloader and it again shows a menu, where you can choose between XP and Win 7. Unfortunately for me, Microsoft does this "mixing bootloaders into one" automatically. I don't know how to change that now, how to separate them. I'd like to start everything directly from the GRUB menu. The bootloader is stored on hd(0,1). I tried to boot from hd(0,0) and hd(0,2) as well, but it didnt work. Can anyone help me please?

  Read the article

• Windows installation repair option not showing up

  - by Jason

  I'm trying to repair an existing Windows XP installation. Following the instructions from http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx this should work: - 1.When the Press any key to boot from CD message is displayed on your screen, press a key to start your computer from the Windows XP CD. - 2.Press ENTER when you see the message To setup Windows XP now, and then press ENTER displayed on the Welcome to Setup screen. - 3.Do not choose the option to press R to use the Recovery Console. - 4.In the Windows XP Licensing Agreement, press F8 to agree to the license agreement. - 5.Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP. - 6.Follow the instructions on the screen to complete Setup. On step 5 pressing R does nothing and there is nothing on the screen saying it would. When I just select to install I get a message that a previous installation is there and proceeding will destroy it and installed applications, I can optionally select a directory other than c:/windows, and I can optionally format before continuing. I had tried to go from SP2-SP3. It failed, and then I couldn't get to Safe Mode. I put the SP1 disk back in to do a repair, and I don't see that option. (I don't have an SP2 boot/install disk, I just have the non-boot upgrade package.)

  Read the article

• What decent audio recording interfaces are well supported in Windows 7 64bit?

  - by labradort

  I currently have an Audigy 2 ZS Platinum. It permits me to insert a 1/4" jack line from bass guitar and play along with pre-recorded piano music. This worked fine under Windows XP. I am moving to Windows 7 64 bit (dual boot for now), and Creative may not develop fully working drivers for this component. Looking around, I don't see Windows 7 support mentioned at product web sites from E-MU, Roland, M-Audio, etc. Even at Creative, the posting of available drivers for Windows 7 is deceptive, as they do not adequately support recording (latency, distortion). My local music store shrugs and says to stay with Win XP. In some cases, the Vista drivers will work in Win 7. So I need real world feedback on this. I should also mention I'm not impressed with available USB interfaces - they have too low of a signal to noise ratio for my purposes. That leaves PCI, or possibly firewire devices (never tried one yet).

  Read the article

• Slowdown after repeated hibernation in XP SP3

  - by John

  I have a Dell laptop w/dual core and 4 gigs of memory. Recently my machine has started to go off in never never land for 5 to 20 minutes at a time with a lot of hard drive churning. Eventually it comes back and everything operates properly. If I manage to have task manager up CPU usage shows no more then 3 to 5% during this process. I am on a corporate network and have very good virus protection in place. The problem seems to have increased in frequency since I let an update happen to IE8 and/or I started using hibernate more frequently. Any ideas or suggestions? TIA J

  Read the article

• How low-power can a home server get?

  - by Halik

  I've got quite simple question actually. How green, low-power and efficient x86 home server can I build using consumer parts with rather constrained budget. After looking through some Google hits I've found out that system based on dual-core atom, some modest mITX board (gigabit lan, integrated audio and gfx etc), one RAM module and one 'green' WD HDD, powered by picoITX PSU uses about 30W at idle up to 40 at load. Can you get lower (or how much lower) then that? Maybe some VIA nano chips, or single core atom? My home server would take care of some back-upping mixed with little ftp/http traffic.

  Read the article

• Hyper-V Cluster with failover - NETWORKING

  - by Adam

  Hi We are looking to setup a 3 node Hyper-V cluster with live migration and failover using: 3 x Dell R710's with dual quad core Xeon & 128 GB RAM & 6 NICs in each 1 x Dell MD 3220i SAN We will be running this setup from a data center and so co-locating our kit. Can anybody explain how we should setup the network connections to make the system redundant? We have looked into this great article but are not sure how to get a 3 server setup correctly and reliably: http://faultbucket.ca/2011/01/hyper-v-failover-cluster-setup/. I believe we need network connections for: live migration, heartbeat, management, hyper-v etc. I assume as we are running it from a DC all IPs will have to be public IPs? Are AD servers will be VMs. One on each Hyper-V server and setup not to be HA.

  Read the article

• Problem with xvideoservice thief

  - by Nrew

  Xvideo service thief is an application that allows you to download and convert youtube videos into .avi format. The problem is when it tries to convert the .flv into a .avi. The audio in the video is not being played when you try to play the video. But the .flv works fine. I have also enabled Intel(R) speedstep feature in my processor(Pentium Dual core E5200) to decrease the power consumed by the processor with the help of Granola software. What might be the reason for the audio less video converter by xvideo service thief? Could it be the enabling of intel(R) speedstep? Because the software works fine when its not enabled. Is this possible?That the output some applications can be altered when enabling this processor feature?

  Read the article

• Virtualbox PXE Boot Failing with a Windows Server 2008 R2 Server

  - by Vbitz

  Some fast help on this would be good, I have been on this problem for 14 hours. In a Virtualbox test environment I have 2 virtual machines networked together using a internal network (no traffic runs though the host, it is all at a software level). One is a fresh client with 512mb of ram and a dual core set-up, the other is the server with 1.5GB of ram and running server 2008 r2. The server is configured as a dns server, dchp server, domain controller and also serves PXE booting though WDS (Windows Deployment Services). Both machines can see each other and I am able to start a network boot. The issue comes at the second to last stage of the pre windows PE install. On TFTP download of boot.sdi it starts it but stops during the boot process.

  Read the article

• Using a sky card in Media Center

  - by Jonathan

  I'm not 100% is this SU suitable but oh well. I'm wondering if it's possible to get a slot of some kind to put my Sky Card into a Media Center PC and then be able to have a triple or dual tuner, and connect to the satelitte dish, allowing me to record 3 and watch a previously recorded. Also it would mean access to Youtube and things easily, with only one box. Also would this be legal or is it similar to Apple where you can only use Mac OSX on boxes with the Apple Logo on?

  Read the article

• SAN cache memory upgrade

  - by Scott Lundberg

  We currently have an IBM DS4300 Dual Controller Fibre SAN. It is a good box, but getting pretty old. It came with 256MB of cache per controller. Recently we replaced the batteries in one of the controllers and noticed that the cache is a DDR PC2100 ECC DIMM. Of course, we are thinking about how cheap this RAM is now and is there any good reason we can't upgrade the RAM. IBM used to have a "Turbo" upgrade to this box that doubled the cache and had a bunch of software features for about 10K USD. Since that product has been end-of-lifed, I don't think we can get that upgrade and we don't need the software upgrades (FlashCopy, StorageCopy, etc). Besides the obvious potential warranty issue, what if any issues would we expect to see if attempting to put 2 - 1GB DIMMS in this unit? Any other things I am missing here? EDIT: Memory label: Samsung CN 0433 PC2100U-25331-A1 M381L3223ETM-CB0 256MB DDR PC2100 CL2.5 ECC

  Read the article

• Radeon 5850 Why am I not getting 3 monitors up as a choice ??

  - by Jan

  Ive just bought the top end ATI Radeon card with 2 normal monitor ports and a HDMI. The idea was to continue using my dual screen setup as always and to use the last plug, the HDMI on my TV. I got a new 52 inch HD TV with all the necessary bits. This should work fine. But.. in Display Properties I still get only my 2 monitors up as options. Not the Digital TV. When I unplug 1 monitor and restart the computer, I get the TV and the other monitor. But never all 3 at the same time. Why is this ? Where can I go to tell it that I need all 3 screens at the same time. Also I get a message saying my gfx card also gives sound through the HDMI cable.. But the TV tells me its recieving a sound format that it does not understand. Any ideas on that too while were at it ?

  Read the article

• Unable to run VMs on hyper-v

  - by PRAWAT-DS

  Folks/Mates, I need some advise and assistance regarding the testing of Hyper-V. Here is my h/ware configuration: 1) Intel i5 processor (i5-750) 2) Intel M/B DP55WB 3) 6 GB DDR3 RAM OS = Server 2008 R2 Standart (evaluation copy). I installed 2008 r2 on my machine and added hyper-v role to it. I created 2 VMs and installed OS. But after finishing the OS installation the VMs are not booting up. After finishing the OS installation, the VM reboots automatically (normal behaviour) and shows "preparing your system for first time" after that it reboots and didn't come online. Few things to notice, when I am running "securable" on my server 2008 R2 OS it shows that processor is not supporting h/ware virtulization, but (since my desktop is dual boot) when I am running "securable" on my windows 7 OS, it shows that process "does" supports hardware virtulization. VT option is already enabled in BIOS. Any help and suggestions are highly appreciated :) Thanks in advance. Pradeep Rawat

  Read the article

• MAC OS for Intel based PCs

  - by Maven

  I have an Intel dual core PC with 4GB of RAM and Graphics card. For on of my student Assignment I need to install Latest possible MAC OS on my system as a secondary OS. Like on boot it asks me that which OS i want to boot with Win 8.1 or Mac Os.. I searched on the internet and found two conflicting opinion some people said there are few MAC OS Version which can be directly installed on Intel PCs some says there aren't? I am here to get rid of the confusion that is an official latest possible MAC OS version for Intel based PCs? If not what are my options if I want to run MAC OS on my PC. Please not that Virtualization options won’t work for me, it has to be working as full OS not an os inside another.

  Read the article

• NTFS write speed really slow (<15MB/s) on Ubuntu

  - by Zulakis

  When copying large files or testing writespeed with dd, the max writespeed I can get is about 12-15MB/s on drives using the NTFS filesystem. I tested multiple drives (all connected using SATA) which all got writespeeds of 100MB/s+ on Windows or when formatted with ext4, so it's not an alignment or drive issue. top shows high cpu usage for the mount.ntfs process. AMD dual core processor (2.2 GHz) Kernel version: 3.5.0-23-generic Ubuntu 12.04 ntfs-3g version: both 2012.1.15AR.1 (Ubuntu default version) and 2013.1.13AR.2 How can I fix the writespeed?

  Read the article

• Best way to Duplicate a Laptop's Hard Drive One-to-One

  - by Urda

  I have a Lenovo X61 Tablet computer, with a plain SATA drive inside. I have windows 7 and Ubuntu 9.10 dual booting on the computer. I want to back up both of these OS's, and their special partitions (Windows 7 has one, and of course the Linux Swap). I want a one-to-one backup, all of my mission critical data is already backed up, but I would like to get a snapshot, and store it on a larger file server at home for quick recovery. What is the best approach to do this?

  Read the article

< Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >