Search Results

Search found 10050 results on 402 pages for 'graphics card'.

Page 126/402 | < Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >

  • How to blacklist a PCI device so a system can boot?

    - by Reda Lazri
    I installed Ubuntu 10.10 on someone's computer which it had a 'Connexant Fusion 878A' PCI card installed, the card is problematic, I had to unplug it just to use the Live CD. Now my question is how to know which module to blacklist, so he can use the card in Windows and override it when he boots into Ubuntu. There's a twist, I can't plug it and lsmod it because it won't let the system boot up even in 'Recovery Mode'. Kernel: 2.6.35-22

    Read the article

  • PowerXpress error with Driver Catalyst. How can I fix it?

    - by J03Bukowski
    I have install Ubuntu 11.10 64bit on my Hp Dv6-3150el. My Notebook has two graphics cards: lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 01:00.0 VGA compatible controller: ATI Technologies Inc Madison [AMD Radeon HD 5000M Series] I tried to install the proprietary graphics drivers ''fglrx'' available in "Additional Drivers", which does not give me 3D graphics acceleration (and I can't install those post-release). Then I can try to download and install from the website (I tried the version that Catalyst 11.8 11.12). The installation goes perfectly (I followed this guide and others), except that when I configure Xorg.conf file: sudo aticonfig --initial PowerXpress error: Cannot stat '/usr/lib64/fglrx': No such file or directory Failed to initialize libglx for discrete GPU

    Read the article

  • Dual displays not working - NVidia - Ubuntu 12.04 - Second Monitor - Two Screens

    - by user75105
    Graphics Card: NVidia 460 GTX. Driver: NVIDIA accelerated graphics driver (version current) I have one DVI monitor, an old Dell LCD from 2005, and one VGA monitor, an Asus ML238H from 2010 whose HDMI port broke. The Asus is plugged into my graphics card's primary monitor slot and is the better monitor even though it is VGA but my computer defaults to the Dell. This happens when I boot as well; the loading screens, the motherboard brand image, etc. are all displayed on the Dell monitor until Windows loads. Then both monitors work. The same thing happened when I booted up Ubuntu 12.04 but I did not see the second monitor when the log-in screen popped up, nor did I when I logged in. I went to System Settings/Displays and my Asus monitor is not an option. I clicked Detect Displays and the Asus is not detected. I looked at the other questions regarding NVIDIA drivers and recalled my problems with Ubuntu a few years ago and decided to check the driver. I went to Additional Drivers to install the proprietary driver and it looks like it's installed and active but I'm still having this problem. There is another driver option, the post-release NVIDIA driver, but that does not fix the problem either. Also, under System Details/Graphics the graphics device is listed as Unknown, which might indicate that it is using an open source generic driver and not the proprietary NVidia driver. But under Additional Drivers it says that I am using the NVidia driver. Any help is appreciated.

    Read the article

  • Very simple test view in MonoTouch draws a line using Core Graphics but view content is not shown

    - by Krumelur
    Hi, I give up now on this very simple test I've been trying to run. I want to add a subview to my window which does nothing but draw a line from one corner of the iPhone's screen to the other and then, using touchesMoved() it is supposed to draw a line from the last to the current point. The issues: 1. Already the initial line is not visible. 2. When using Interface Builder, the initial line is visible, but drawRect() is never called, even if I call SetNeedsDisplay(). It can't be that hard...can somebody fix the code below to make it work? In main.cs in FinishedLaunching(): oView = new TestView(); oView.AutoresizingMask = UIViewAutoresizing.FlexibleWidth | UIViewAutoresizing.FlexibleHeight; oView.Frame = new System.Drawing.RectangleF(0, 0, 320, 480); window.AddSubview(oView); window.MakeKeyAndVisible (); The TestView.cs: using System; using MonoTouch.UIKit; using MonoTouch.CoreGraphics; using System.Drawing; using MonoTouch.CoreAnimation; using MonoTouch.Foundation; namespace Test { public class TestView : UIView { public TestView () : base() { } public override void DrawRect (RectangleF area, UIViewPrintFormatter formatter) { CGContext oContext = UIGraphics.GetCurrentContext(); oContext.SetStrokeColor(UIColor.Red.CGColor.Components); oContext.SetLineWidth(3.0f); this.oLastPoint.Y = UIScreen.MainScreen.ApplicationFrame.Size.Height - this.oLastPoint.Y; this.oCurrentPoint.Y = UIScreen.MainScreen.ApplicationFrame.Size.Height - this.oCurrentPoint.Y; oContext.StrokeLineSegments(new PointF[] {this.oLastPoint, this.oCurrentPoint }); oContext.Flush(); oContext.RestoreState(); Console.Out.WriteLine("Current X: {0}, Y: {1}", oCurrentPoint.X.ToString(), oCurrentPoint.Y.ToString()); Console.Out.WriteLine("Last X: {0}, Y: {1}", oLastPoint.X.ToString(), oLastPoint.Y.ToString()); } private PointF oCurrentPoint = new PointF(0, 0); private PointF oLastPoint = new PointF(320, 480); public override void TouchesMoved (MonoTouch.Foundation.NSSet touches, UIEvent evt) { base.TouchesMoved (touches, evt); UITouch oTouch = (UITouch)touches.AnyObject; this.oCurrentPoint = oTouch.LocationInView(this); this.oLastPoint = oTouch.PreviousLocationInView(this); this.SetNeedsDisplay(); } } }

    Read the article

  • ATI HD5450 w/ Ubuntu 14?

    - by Oliwb
    So, I'm running Ubuntu 12.04 right now. Last night I realised that I'm way behind as we're up to 14! Decided to run the updater and figured I'd take the path of least resistance (but lengthy choice) of going 12.04 - 12.10 - 13.xx - 14.xx. So I download the first packet and then get an error message about my graphics card perhaps not working in 12.10. Now part of the reason I was looking to upgrade is because I get (and have always had) this strange occasional flickering - now that I have two screens it's just on the second monitor.....oddly this is not the same port that was giving issues before). The graphics card is an ATI Radeon HD5450 and I have the Catalyst (I think it's 13 or 14) driver installed - last night. It could be that the graphics card has never worked properly...I bought the PC new and with an "upgraded" video card and it's always suffered with this flicker. I just figured that the drivers weren't right or something. So I have 3 questions: 1) is my video card broken or is the driver letting it down and causing the flicker? 2) will it be able to handle the upgrade to 14 via 13? Or should I cut my losses and get something newer? 3) if I should get something newer....what should I get ( Thanks in advance....

    Read the article

  • How do I turn off nVidia high performance mode?

    - by gpen06
    I am new to Ubuntu 11.10 and never touched linux until today. I installed Ubuntu alongside with Windows 7. I have an issue with my laptop overheating and freezing when it uses the high performance GPU graphics mode (hybrid card). It is an easy fix for Windows 7. I simply set the graphics mode manually to the low performance integrated graphics (save power) mode using advanced power settings. In Ubuntu, I'm stumped at how to do this. When using Ubuntu, my laptop is showing the same symptoms as it did without the fix for Windows. I have the nVidia graphics driver installed for Windows which allows me to see which mode I am in. I downloaded it off of my laptop's website (ASUS). They do not offer driver downloads for linux. Screenshot of power settings in Windows 7

    Read the article

  • How can I improve the battery life under 12.04 on my Inspiron 14z? [duplicate]

    - by cfogelberg
    This question already has an answer here: Tips to extend battery life for laptops and notebooks 24 answers How do I improve the battery life of my Inspiron 14z under Ubuntu 12.04? This laptop gets 4-5 hours of battery life using Windows (e.g. here). I've removed Windows, installed Ubuntu 12.04 and the initial battery life was only 2 hours. With some tweaks (described below) it's still only ~2.5 hours. For reference, the laptop is the latest model of the 14z: i5-3337U processor 32GB MSATA, 500GB HDD (5400rpm) AMD Radeon HD7570M graphics card I have put ext4 partitions on both the SSD and the HDD, and have mounted / to the SSD and /home to the HDD. I also put a 24gb linux swap partition at the start of the HDD, though I figure this won't be used all that much (the laptop has 8gb of RAM). After googling around and reading Ask Ubuntu and other sites extensively, I have done the following steps, and they have improved the battery life ~30 minutes (exact improvement not clear, but battery life is still nowhere near 4-5 hours). Installed Jupiter (and set Performance to "Power Saving") Installed laptop-mode-tools cat /proc/sys/vm/laptop_mode now outputs 5 (previously it output 0) But it's not clear that this will help: AskUbuntu question Turned down the brightness of my screen from full to 1/3 Other things I have heard about but have not tried for fear of frying the laptop or my linux install: Add "pcie_aspm=force" at the end of the line with "quiet splash" in /boot/grub/grub.cfg Enable ALPM, but it may already be enabled in 12.04? Enable i915 framebuffer compression Use a propietary driver for the graphics card? Turn off the graphics card? (what would happen if I relied on the internal Intel bridge?) Use TLP? Spin down the HDD more aggressively (howto, but I think laptop-mode-tools does this already) The only other thing I've noticed is that plastic just above the F5, F6 and F7 keys gets really hot. According to Jupiter my CPU temperature is only 69 celsius and the System Monitor shows CPU load at 7% so I don't think it's the CPU. Maybe it's the graphics card? Also, I've set up MongoDB and LAMP on the machine as well. When I run powertop MongoDB is high in the list, but I'm not sure if that's relevant to battery life because I'm not actually doing anything with MongoDB most of the time. Edit - Additional info as requested $ lspci -nnk | grep -iEA3 "(graphics|vga)" 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) Subsystem: Dell Device [1028:057f] Kernel driver in use: i915 Kernel modules: i915 -- 02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] [1002:6841] Subsystem: Dell Device [1028:057f] Kernel driver in use: radeon Kernel modules: radeon

    Read the article

  • Is there a PROPRIETARY driver (NVIDIA or ATI) that actually works with 12.10?

    - by DS13
    NOTE: I see many similar topics on this, but I've tried all their suggestions, and nothing has worked. THE MAIN DIFFERENCE SEEMS TO BE: I always get a black screen with a blinking cursor, while others seem to get through the boot-up and see distorted graphics or just their wallpaper. ISSUE: I do a clean install of Ubuntu 12.10. Boots fine with the “nouveau” graphics driver – graphics (even just menus) are very slow, choppy, and distorted. The three other driver options in Ubuntu (official NVIDIA drivers), all result in a variation of the black screen on boot up. There will be NO access to a command line/GUI in anyway what-so-ever (tried every option recommended out there, but the system is unusable at this stage). I can only reinstall, and try different drivers…and I only ever get one shot at it. QUESTIONS: -Does anyone know of a PROPRIETARY driver that will actually work on 12.10 with a NVIDIA or ATI card? -Should I just buy a newer graphics card to put in as a replacement? MORE INFO: This is my second computer, and I’m just trying to get a working install of Ubuntu on it. I don’t want to put much money into it, as I have seen Ubuntu run great on much older/less capable machines. I’ve got a decent'ish Core2Duo Intel processor (2.13Ghz), 2GB of RAM, 320GB hard drive, 32-bit architecture, and there is no other O/S installed. It appears as if the graphics card (NVIDIA Geforce 7350 LE) is holding me back. TRIED SO FAR: -all drivers available in Ubuntu *all fail -manual install of some different NVIDIA drivers *all fail -also tried installing the generic kernel, Nvidia driver doesn't work in 12.10 *no difference -tried installing 12.04 *same results -every method suggested to at least get a command line after switching to a NVIDIA driver *all fail -UPDATE- Re-tried everything above with a new NVIDIA Geforce 210...same results for everything. -UPDATE #2- Re-tried everything above with a new AMD Radeon HD 6450...installed the proprietary driver from Ubuntu's "Software Sources" menu...EVERYTHING NOW WORKS. See "answer" below for summary.

    Read the article

  • Dual 7950, freezes during startup

    - by Hiro
    I have two identical video cards right now. Xubuntu will boot up no problem if I only have one card installed. If I install the 2nd card it will just hang midway thru the loading screen. Regardless of which card I use and which position on the motherboard, it will freeze if I have both installed. I've tried installing the proprietary drivers, both fglrx and fglrx-updates, still freezes in the same spot. Uninstalled those and went back to the default ones. The only way I can get a terminal is by booting into failsafe mode. Booting using 13.10 i386 on a USB stick gives me some errors related to what I think is the 2nd video card: [drm:r600_ring_test] ERROR radeon: ring 1 test failed (scratch(0x850C)=0xCAFEDEAD) [drm:r600_dma_ring_test] ERROR radeon: ring 3 test failed (0x02FFFF6B) radeon 0000:0200.2 disabling GPU acceleration"

    Read the article

  • Dual displays not working - NVidia - Ubuntu 12.4

    - by user75105
    Graphics Card: NVidia 460 GTX. Driver: NVIDIA accelerated graphics driver (version current) I have one DVI monitor, an old Dell LCD from 2005, and one VGA monitor, an Asus ML238H from 2010 whose HDMI port broke. The Asus is plugged into my graphics card's primary monitor slot and is the better monitor even though it is VGA but my computer defaults to the Dell. This happens when I boot as well; the loading screens, the motherboard brand image, etc. are all displayed on the Dell monitor until Windows loads. Then both monitors work. The same thing happened when I booted up Ubuntu 12.4 but I did not see the second monitor when the log-in screen popped up, nor did I when I logged in. I went to System Settings/Displays and my Asus monitor is not an option. I clicked Detect Displays and the Asus is not detected. I looked at the other questions regarding NVIDIA drivers and recalled my problems with Ubuntu a few years ago and decided to check the driver. I went to Additional Drivers to install the proprietary driver and it looks like it's installed and active but I'm still having this problem. There is another driver option, the post-release NVIDIA driver, but that does not fix the problem either. Also, under System Details/Graphics the graphics device is listed as Unknown, which might indicate that it is using an open source generic driver and not the proprietary NVidia driver. But under Additional Drivers it says that I am using the NVidia driver. Any help is appreciated.

    Read the article

  • What is the most performant 2D graphics engine for use with Android?

    - by nbolton
    I have managed to make a hello world JBox2D application, and it works (I have some bouncing balls). However, I just read a comment on a forum post, which claims that JBox2D produces a lot of garbage, and so causes animation to be poor. Is this true? If yes, then what other 2D engines are available to me? I would very much like to use a physics engine for my 2D game, even if it's just a very simple one.

    Read the article

  • Wifi connection problems

    - by user12511
    I have Ubuntu 10.10 installed on a HP Pavilion DV2750ea. The wifi card is an Intel 4965AGN. When I first started using Ubuntu on this laptop it connected wirelessly to the network. Then it suddenly stopped. The Wifi card power light is off and all information says the card is disabled. When the laptop is powered on the wifi power light turns on and stays on until Ubuntu finishes loading. I have replaced the wifi card and the wifi switch module with no change. Please can you help.

    Read the article

  • Upgraded Ubuntu from 12.04 to 12.10 Ati radeon HD 3450 Catastrophe!

    - by minime
    When I had upgraded everything was ready on the screen om my computer and with my 12.04 ubuntu. When I restarted my system, the graphics card was not detected. I was forced to start the computer in low graphics mode, and eventually I had a pink deskop with only my maps, and no other programs at all. What do I do now? I need to recover the pictures on my system so that I can upload them online. I'd done a graphics card test on the terminal initially, and it showed that the card was compatible with unity 3D. I have an ATI radeon HD 3450 and I was running a 32 bit build of Ubuntu 12.04 initially Right now I have a broken install of Linux, with no working graphics card or desktop to start from, so I'm unsure of how to fix this.

    Read the article

  • Windows 7 unidentified network (or limited access) after hibernate.

    - by null
    My windows 7 network will show limited access or unidentified network after coming up from hibernation. In the office I normally use LAN connection, I turn-off my wireless card (DELL Latitude has on/off switch for the wireless card). When I back at home I will turn on the wireless card, but it will take about 15 seconds to detect my home WIFI and then show limited access. I will have to restart the notebook and it will be able to connect to my WIFI and internet. The problem will be solved if I restart the notebook, but that defeats the purpose of hibernation doesn't it? I have tried uninstalling the wireless card driver but still does not solve it. I also tried updating my network card driver but windows says I am using the latest driver. On support.dell.com also showing I am using the latest driver.

    Read the article

  • Is there a way I can overlay graphics on top of all windows using C#?

    - by Secrest
    I want to create a C# app which rests in the system tray. However, I would like this application to overlay certain graphic elements / drawing on top of the screen above all windows at certain times. So, for example, while my application is running, even though minimized to the tray, it will draw certain shapes on top of the screen regardless of what is there. Is this possible using C#? If not, is there any other language that would have this capability?

    Read the article

  • Concat LPSTR in C++

    - by Cat Man Do
    Trying to use as basic C++ as I can to build a list of numbers from 1-52 in a random order (deck of cards). Unfortauntely, all my attempts to concat the strings and get a result end in failure. Any suggestions? NOTE: This is not homework it's something I'm using to create a game. // Locals char result[200] = ""; // Result int card[52]; // Array of cards srand(time(0)); // Initialize seed "randomly" // Build for (int i=0; i<52; i++) { card[i] = i; // fill the array in order } // Shuffle cards for (int i=0; i<(52-1); i++) { int r = i + (rand() % (52-i)); int temp = card[i]; card[i] = card[r]; card[r] = temp; } // Build result for (int c=0; c<52; c++) { // Build sprintf(result, "%d", card[c]); // Comma? if ( c < 51 ) { sprintf(result, "%s", ","); } } My end result is always garbled text. Thanks for the help.

    Read the article

  • treeview loses data when page is being refreshed in asp.net

    - by Greg
    Hi, I have a treeview and I written a code for his "treeNodePopulate" event: protected void ycActiveTree_TreeNodePopulate(object sender, TreeNodeEventArgs e) { if (Application["idList"] != null && e.Node.Depth == 0) { string[] words = ((String)Application["idList"]).Split(' '); // Yellow Card details TreeNode child = new TreeNode(""); // Go over all the yellow card details and populate the treeview for (int i = 1; i < words.Length; i++) { child.SelectAction = TreeNodeSelectAction.None; // Same yellow card if (words[i] != "*") { // End of details and start of point ip's if (words[i] == "$") { // Add the yellow card node TreeNode yellowCardNode = new TreeNode(child.Text); yellowCardNode.SelectAction = TreeNodeSelectAction.Expand; e.Node.ChildNodes.Add(yellowCardNode); child.Text = ""; } // yellow card details else { child.Text = child.Text + words[i] + " "; } } // End of yellow card else { child.PopulateOnDemand = false; child.SelectAction = TreeNodeSelectAction.None; // Populate the yellow card node e.Node.ChildNodes[e.Node.ChildNodes.Count - 1].ChildNodes.Add(child); TreeNode moveChild = new TreeNode("Move To Reviewed"); moveChild.PopulateOnDemand = false; moveChild.SelectAction = TreeNodeSelectAction.Select; e.Node.ChildNodes[e.Node.ChildNodes.Count - 1].ChildNodes.Add(moveChild); child = new TreeNode(""); } } Application["idList"] = null; } } I want the treenode to get the data from the Application variable and then nullify the Application variable so that the tree will take data from Applcation only if there is something in it (I put data into the application from another page and then redirect to this page) But when I refresh this page the data in the treenode isnt being saved. I mean after the refresh the Application is null so he isnt doing anything. The question is why is the data that I put in the treenode earlier isnt being saved? The "enableViewState" property is set to "true".. Thanks in advance, Greg

    Read the article

  • Finding out max available print area

    - by Armagan
    I'm trying to find out max available area on my printer. I've printed a simple rectangle trying out different boundary variables. My question is, why doesn't first two work correctly? They don't print a full rectangle on the paper, only the left and top sides are drawn. Why does only the third one prints a full rectangle? I was under the impression of that all three should be working correctly. What am I missing? Here's my code: this.printDocument1.DefaultPageSettings.Margins = new Margins(0, 0, 0, 0); ... private void PrintPage(object sender, PrintPageEventArgs e) { //Method 1, no right and bottom sides are printed e.Graphics.DrawRectangle(new Pen(Color.Black, 1), e.PageBounds); //Method 2, same as Method 1 e.Graphics.DrawRectangle(new Pen(Color.Black, 1), e.MarginBounds); //Method 3, works correctly e.Graphics.DrawRectangle(new Pen(Color.Black, 1), new Rectangle((int)e.Graphics.VisibleClipBounds.X, (int)e.Graphics.VisibleClipBounds.Y, (int)e.Graphics.VisibleClipBounds.Width, (int)e.Graphics.VisibleClipBounds.Height)); }

    Read the article

< Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >