Search Results

Search found 21678 results on 868 pages for 'network traffic'.

Page 126/868 | < Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >

• Error when trying to access Shared files from iMac [closed]

  - by SatheeshJM

  I used to access all my Windows XP shared files on my Mac using Finder -- Window -- Connect to server. Now all of a sudden, an error crops up when I try to connect. I get the error "There was a problem connecting to the server "192.168.1.*" The server may not exist or it is unavailable at this time. Check the server name or IP address, check your internet connection and then try again. How can I remove this error and access my shared files from my Mac? P.S my network connections is fine.

  Read the article

• Shared printer can't be added

  - by Sandokan

  We have a small training network with server 2003, and XP clients and users in a AD domain. A printer is connected to a client with USB. We are trying to share the printer to all the users but it's not working. We come so far as the users can see the printer when they search for it. But when they try to add it, there appears a pop up window for user name and password. No matter what user name we try it doesn't work. We have checked the shared printer's security settings and they are all in order. Everyone has printer rights. But even with full rights it doesn't work. The only ones it works for are Domain Admins. Anyone have any ideas?

  Read the article

• Windows 7: Shared folder over wifi working for ONLY "Guests"

  - by James_Smith

  Hi, I have a desktop and a laptop connected to same wifi router. Desktop is connected with wire and laptop with wifi. Both the system runs windows 7 and are on the same workgroup. I have shared some folders on desktop and can view the shared folder list on laptop under "network places". But when I try to open a folder, a prompt appears for username and password. When I enter BOTH username and password, It does not authenticate when I enter ONLY username, I get:- "Windows cannot access \WIn71\Setups you do not have permission to access ..." Now to get around this message I have to give access to "Guests" group on my desktop shared folder. Cant seem to figure out why It cant authenticate username with password. And giving access to "Guests" does not sounds safe!

  Read the article

• Load-balance with LAN and Wi-Fi

  - by Synox

  I have a Mac, which runs Mac OS X 10.6 or Ubuntu 9.10 or Windows XP (Multiboot). Solution can be for any of the systems, whatever works better. I have two ISPs, one can be accessed via Wi-Fi, one can be accessed via LAN. In Mac OS X I can define the priority, which network to choose first. But what I wish to do is to load-balance with both networks. I don't want to buy extra hardware. I have some unused Wi-Fi routers if this would help. Compiling and configuring programs in Linux is no problem for me. Similar question: Load balancing with multiple gateways

  Read the article

• Need to know who is hogging my bandwidth?

  - by Dev

  I have an ethernet connection to my iMac and with Internet sharing I am broadcasting the wireless network from my mac rather than using a wireless router. I use it to connect other devices wirelessly to the internet. But this makes all the traffic flow through my iMac. I wanted a way to analyze the traffic so that I know what connected devices are hogging the bandwidth at a given time and from which websites? I installed wireshark for mac and played around a little but it seems like an overkill when you first look at it. Can someone please help with few instructions to get what I need or any other way other than using wireshark? Thanks Dev.

  Read the article

• Weird Network Behavior of Home Router

  - by Stilgar

  First of all I would like to apologize because what you are going to read will be long and confusing but I am fighting this issue for 3 days now and am out of ideas. At home I have the following setup 50Mbps Internet connects into a home router A 2 desktop computers connect to router A via standard FTP LAN cables including one where the cable is ~20m long. a second router B connects to router A via standard FTP LAN cable X (~20m long). several devices connect to the wireless network of router B and there are a couple of desktop computers connected to it through FTP LAN cables. For some reason computers connected to router B when it is connected via cable X have very slow Internet connection. It is like 5 times slower than what is expected. This is the actual problem I am trying to solve. Interesting facts If a computer is connected to cable X directly instead of through router B the Internet speed is just fine (up to the 50Mbps I get from the ISP). Tested with two computers. I have tried replacing router B with another router C and the problem persists. If I connect router B via another cable to the same ports with the same settings everything seems to work fine and computers connected to router B have quite fast Internet I have tested mainly via Speedtest.net but I have also achieved similar speeds when downloading a file The upload speed is quite higher than the download speed in all cases. Note that my ISP usually has higher upload speed (unless it manages to hit the 50Mbps cap) It seems like the speed when connecting through router B with cable X is reduced 4-5 times no matter what the original speed is. For example via router B I get 10Mbps speed to local servers where I get 50Mbps when connected on router A. If I use a distant server where the ISP is only able to provide 25Mbps I get 4-5Mbps on router B. WiFi is slower than LAN on both routers (which is normal) but the reduced speed is reduced proportionally for WiFi. In addition the upload speed is normally higher from the ISP and it is also reduced proportionally. I have tried two different network configurations. One where I have NAT behind NAT where router B connects to router A via the WAN port and has its own DHCP. Second where router B connects to router A via standard LAN port and has DHCP disabled. In this configuration router B serves as a switch and the Network Gateway for computers connected to router B is the internal IP address of router A. Both configurations work just fine but both manifest the reduced speed issue. pings seem to work just fine As far as I can tell none of the cables is crossed The RJ45 setup for cable X orange orange-white brown brow-white blue blue-white green green-white This is a big problem for me since cable X passes through walls and floors and is very hard to replace. I also may have gotten some of the facts wrong because I am almost going crazy with this issue and testing includes going several floors up and down the staircase. One hypothesis I came up with is that the cable is defective in such a way that the voltage from the router affects its performance. When it is connected to a computer it performs just fine but the router has less power. Related hypothesis includes the cable being affected by electricity cables in the walls when the voltage is low. (I know nothing about electricity) So any ideas what to do, what to test or what the issue may be?

  Read the article

• Ubuntu Server, 2 Ethernet Devices, Same Gateway - Want to force internet traffic through 1 device (or at least allow it to work!)

  - by Chris Drumgoole

  I have a Ubuntu 10.04 Server with 2 ethernet devices, eth0 and eth1. eth0 has a static IP of 192.168.1.210 eth1 has a static IP if 192.168.1.211 The DHCP server (which also serves as the internet gateway) sits at 192.168.1.1. The issue I have right now is when I have both plugged in, I can connect to both IPs over SSH internally, but I can't connect to the internet from the server. If I unplug one of the devices (e.g. eth1), then it works, no problem. (Also, I get the same result when I run sudo ifconfig eth1 down). Question, how can I configure it so that I can have both devices eth0 and eth1 play nice on the same network, but allow internet access as well? (I am open to either enforcing all inet traffic going through a single device, or through both, I'm flexible). From my google searching, it seems I could have a unique (or not popular) problem, so haven't been able to find a solution. Is this something that people generally don't do? The reason I want to make use of both ethernet devices is because I want to run different local traffic services on on both to split the load, so to speak... Thanks in advance. UPDATE Contents of /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # The secondary network interface #auto eth1 #iface eth1 inet dhcp (Note: above, I commented out the last 2 lines because I thought that was causing issues... but it didn't solve it) netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 192.168.1.1 255.255.255.0 UG 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 UPDATE 2 I made a change to the /etc/network/interfaces file as suggested by Kevin. Before I display the file contents and the route table, when I am logged into the server (through SSH), I can not ping an external server, so this is the same issue I was experiencing that led to me posting this question. I ran a /etc/init.d/networking restart after making the file changes. Contents of /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp address 192.168.1.210 netmask 255.255.255.0 gateway 192.168.1.1 # The secondary network interface auto eth1 iface eth1 inet dhcp address 192.168.1.211 netmask 255.255.255.0 ifconfig output eth0 Link encap:Ethernet HWaddr 78:2b:cb:4c:02:7f inet addr:192.168.1.210 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::7a2b:cbff:fe4c:27f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6397 errors:0 dropped:0 overruns:0 frame:0 TX packets:683 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:538881 (538.8 KB) TX bytes:85597 (85.5 KB) Interrupt:36 Memory:da000000-da012800 eth1 Link encap:Ethernet HWaddr 78:2b:cb:4c:02:80 inet addr:192.168.1.211 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::7a2b:cbff:fe4c:280/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5799 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:484436 (484.4 KB) TX bytes:1184 (1.1 KB) Interrupt:48 Memory:dc000000-dc012800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:635 errors:0 dropped:0 overruns:0 frame:0 TX packets:635 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:38154 (38.1 KB) TX bytes:38154 (38.1 KB) netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0

  Read the article

• Good C# Networking Book

  - by Dan

  Hey guys I am looking for a good solid introduction book to the fundementals of network programming in C#. For example is have looked at this one http://www.amazon.com/C-Network-Programming-Richard-Blum/dp/0782141765/ref=pd_sim_b_5 but it is quite old now. Anyone used one recently, i would greatly appriciate it thanks dan

  Read the article

• What is the iPhone simulator IP address?

  - by Chris G

  Hi I have been looking for the answer to this question for some time. I am doing network programming for the iPhone and it is necessary for me to use the IP address of the device. This isn't a problem on the physical device as it has its own IP address on the network. However I was wondering what was the case with it on the simulator. Does it get assigned an IP address to be used? Thanks in advanced for any help, CG

  Read the article

• Account sharing among Ubuntu machines

  - by muckabout

  I'd like a simple and secure system to have allow users in our network to have their account (e.g., 'myname') work on every machine in the network (e.g., such that they could ssh to any machine and have the same userid, mounted smb share). Any suggestions?

  Read the article

• C# - NetworkChangeEventHandler

  - by Andy

  I have small application which catches Network Availability change and its working very fine in client Desktop m/c (which is having XP) But when I tested the same in Vista by disabling the network and enabling it again..the event is not getting triggered. NetworkChange.NetworkAvailabilityChanged += new NetworkAvailabilityChangedEventHandler(NetworkChange_NetworkAvailabilityChanged); private void NetworkChange_NetworkAvailabilityChanged(object sender, NetworkAvailabilityEventArgs e) {.....} Does .Net framework 3.5 got any new solution introduced ...

  Read the article

• Activation Function, Initializer function, etc, effects on neural networks for face detection

  - by harry

  There's various activation functions: sigmoid, tanh, etc. And there's also a few initializer functions: Nguyen and Widrow, random, normalized, constant, zero, etc. So do these have much effect on the outcome of a neural network specialising in face detection? Right now I'm using the Tanh activation function and just randomising all the weights from -0.5 to 0.5. I have no idea if this is the best approach though, and with 4 hours to train the network each time, I'd rather ask on here than experiment!

  Read the article

• copy files to nework path or Drive using python

  - by user218976

  hi , Mine is similar to this question. http://stackoverflow.com/questions/2042342/network-path-and-variables-in-python/2042376 The only difference is my network drive has a password protect with user name and password . I need to copy files to a samba share using python and verify it. if i manually login in then the code works but without logging in the shutil command does not work Thanks

  Read the article

• python intercepting communication

  - by nabizan

  lets say you run third party program on your computer whitch create a process named example.exe how do i determinate if this process is running and how many windows does he open? How do i intercept network communication between this windows and server? my goal is to create an app whitch will be monitoring network trafic between example.exe and its home server in order to analyze data and save to database, and finally simulate user interaction to get more relevant data

  Read the article

• How host name is broadcasted in a subnet

  - by apalopohapa

  Hello. I'm working with Microchip's TCP/IP stack and the host name of my device is not being broadcasted, although I can access it using its DHCP assigned IP. So the question is, what is the protocol that a network device uses to broadcast its host name, so that when I see a list of devices in a network I can identify it by name? Is it the NetBIOS name service or something else? Thanks in advance.

  Read the article

• Hyper-V Server 2012 - "No Active Network Adapter Found"

  - by Vazgen

  I just installed Hyper-V Server 2012 and first thing I get when logging in to the host is "No Active Network Adapter Found". I know I have to use the following command: pnputil –i –a <inf file> I found the Realtek Network Driver for my MB for Windows 7 here: http://za.asus.com/Motherboards/AMD_AM3Plus/M5A97_PRO/#download But there is not one for Windows 8 so I tried using the Win 7 one with PnPUtil, and I got: Failed to install the driver on any of the devices on the system: No more data is available. Does this really mean I can't use Hyper-V Server 2012 with my motherboard? This is hard to believe because I installed Windows Server 2012 directly (prior to installing Hyper-V Server 2012) on this same computer and I had internet access on that server without even configuring any drivers. Ok so I went to PowerShell from cmd and typed Get-NetIPConfiguration And it said the name of my driver (Realtek) and "Disconnected". I switched the Ethernet wire from my primary computer with my server and everything was fixed. Interestingly, my primary computer connects to the internet just fine with the wire that was previously in the server, just with much slower speed. Does anyone know what could be the difference between these 2 Ethernet wires?

  Read the article

• SQL Server 2008 Cluster Installation - First network name always fails

  - by boflynn

  I'm testing failover clustering in Windows Server 2008 to host a SQL Server 2008 installation using this installation guide. My base cluster is installed and working properly, as well as clustering the DTC service. However, when it comes time to install SQL Server, my first attempt at installation always fails with the same message and seems to "taint" the network name. For example, with my previous cluster attempt, I was installing SQL Server as VSQL. After approximately 15 attempts of installation and trying to resolve the errors, e.g. changing domain accounts for SQL, setting SPNs, etc., I typoed the network name as VQSL and the installation worked. Similarly on my current cluster, I tried installing with the SQL service named PROD-C1-DB and got the same errors as last time until I tried changing the name to anything else, e.g. PROD-C1-DB1, SQL, TEST, etc., at which point the install works. It will even install to VSQL now. While testing, my install routine was: Run setup.exe from patched media, selecting appropriate options After the install fails, I'd chose "Remove node from a SQL Server failover cluster" and remove the single, failed, node Attempt to diagnose problem, inspect event logs, etc. Delete the computer account that was created for the SQL Service from Active Directory Delete the MSSQL10.MSSQLSERVER folder from the shared data drive The error message I receive from the SQL Server installer is: The following error has occurred: The cluster resource 'SQL Server' could not be brought online. Error: The group or resource is not in the correct state to perform the requested operation. (Exception from HRESULT: 0x8007139F) Along with hundreds of the following errors in the Application event log: [sqsrvres] checkODBCConnectError: sqlstate = 28000; native error = 4818; message = [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. System configuration notes: Windows Server 2008 Enterprise Edition x64 SQL Server 2008 Enterprise Edition x64 using slipstreamed SP1+CU1 media Dell PowerEdge servers Fibre attached storage

  Read the article

• UNC Path fails by IP "no network provider accepted the given network path", but works using hostname

  - by BoyMars

  I have an unusual problem with a Windows Server 2003 (Standard x86) box. It appears the machine will not accept connections to its shares (locally and from other domain member servers) by using its ip address in a UNC path. The error returned is: "no network provider accepted the given network path" This is the case with the machine's ip address: \\10.0.8.x and even the loopback address: \\127.0.0.1 \\localhost does not work... but using the hostname (fqdn or not) works: \\server & \\server.domain.local The local windows firewall for this server is off, ping/rdp/other services respond fine using the IP address. The following services are running and have been restarted: Computer Browser Workstation Server The server itself has been rebooted too. Event 8032 in the system log indicates that: The browser service has failed to retrieve the backup list too many times on transport \Device\NetBT_Tcpip_{29A6A925-AFB3-47E2-BA59-DDA086DEAE7A}. The backup browser is stopping. The domain controller has not been restarted, no other servers have experienced this problem, yet there are a number of browser (8021) related errors in the logs on this server. Does anyone have any suggestions? I would like to avoid rejoining this server to the domain if possible.

  Read the article

• Looking for USB Network Attached Storage (NAS) Adapter that supports multiple drives, NTFS/FAT32 fil

  - by braveterry

  I'm looking for a NAS Adapter that supports attaching multiple USB devices to the network. Here's what I'd like to see in a NAS adapter: Under $100.00. Support for multiple devices. This can be through a USB hub or through multiple USB connectors on the device itself. Bittorrent support would be nice, but this isn't a deal-breaker. Filesystem support for at least NTFS or FAT32. I'd prefer to not have to reformat to use the device, but this is also not a deal-breaker. Here is what I am NOT looking for: I'm NOT looking for a NAS enclosure. I already have a couple of spare external USB drives that I'd like to use. I'm NOT looking for a networked USB hub like the one mentioned here. Network USB hubs only allow access to a drive from one PC at a time. I'm NOT looking for a wireless router with a NAS built in. I already have a wireless router, and I'd rather not go through the hassle of replacing it if possible. What I've looked at so far PogoPlug: This supports multiple devices via a USB hub, but there's not Bittorrent support. It's $99.00, so I may end up going with this and hope that they patch in Bittorrent support later. Addonics NAS Adapter: This supports only one device per adapter, so it's a non-starter. SimpleNET NAS Head USB 2.0 Portable Dongle: I'm not 100% sure this supports multiple devices. Plus there doesn't seem to be any Bittorrent support. I'll try to update this post as I explore other devices.

  Read the article

• Arch Linux drops me on my school network.

  - by Kravlin

  I'm running a Lenovo X61 which i carry around my college for getting on the internet at various points in the day. The network has always been finicky but recently it's gotten worse. I'll connect using iwconfig, get an ip from dhcpcd and log in using vpnc to their system. Sometimes I'll stay connected for hours but most of the time within 30 seconds my network traffic will drop to zero and i'll be unable to do anything. My computer still belives it's connected, however to try again i need to put my wireless interface down, put it back up and try again. It's gotten so bad that i've got a window on my computer pinging yahoo or google constantly in order to know if i'm still able to get online. I know other people who have used Arch Linux that don't have the same problems as well as people who use Ubuntu who haven't had any problems either. It seems like my computer is a special case. Does anyone have any suggestions on how to fix it? dmesg doesn't show anything out of the ordinary going on and i don't know where else to look for errors or other things to try.

  Read the article

• Setting up a network e-mail server

  - by Jason

  Hello, My boss just asked me to buy a new server for our office network. I know next to nothing about servers and networking, so I need someone to point me in the right direction. He said he wants this to be our e-mail server with a network login. I have no idea how to set up an e-mail server, especially one that sends/receives e-mail using our domain name. We use a terrible piece of order/inventory software called Mail Order Manager (MOM). Our computers currently connect to the MOM database through a networked drive. My boss would like to move away from this peer-to-peer MOM setup. The software publisher offers a SQL version of MOM, but it's way overpriced. Is there a better way to connect to these databases without using the SQL version? Finally, the server needs to be running Windows. Does this question make sense, is it possible, and can someone help me get started? Thanks!

  Read the article

• Changing subnet-mask of class-c network host to 255.255.0.0

  - by Prashant Mandhare

  We have a existing class-c network with IP address range 11.22.33.44/24 (just for example). My domain controller has been configured within this subnet. So all servers within this subnet have subnet mask configured to 255.255.255.0. Now we have got a new subnet with IP address 11.22.88.99/24 (note that only last 2 octets have changed). I want all new hosts in this new subnet to join my existing DC. For this we have configured firewall properly so allow this. (so there is no issue with firewall). But initially I was not able to join hosts in new subnet in existing domain. Later I doubted on subnet mask used in domain controller (255.255.255.0) and for testing purpose I changed it to 255.255.0.0, it worked like charm, i was able to join subnet-2 hosts in subnet-1 domain. Now i am wondering whether it will be good practice to change subnet mask of a class-c network to 255.255.0.0? Can any issues arise due to this? Experts please provide your opinion.

  Read the article

• One host on a network can't connect to one other host

  - by Max Williams

  I'm on a local network with a few other people. On of the hosts is a virtual machine running in virtualbox on a mac, which has the ip address 192.168.0.35 (the VM that is, not the mac host). Everyone except one guy can connect (ie ping, ssh etc) to that machine. When that one guy tries to ping it he gets Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 which i understand is just how certain mac os's report an unreachable connection. He can ping all the other hosts on the network, ie our computers, and we can all ping the VM fine and connect to it with no problems etc. His ip is 192.168.0.17. I ssh'd onto his machine (as a new user 'anon') and saw the same problems. I can ssh onto the 192.168.0.35 VM as well. From there, i can ping other users, but when i ping the problem guy, it's unreachable that way round as well. He restarted his mac, and was fine for a while. Then, just stopped working again. He's got a different IP to before. Any ideas, anyone? Don't know enough about this stuff to even diagnose the problem. thanks, max

  Read the article

• Cannot access certain URL on my wireless

  - by dehmann

  Problem: On my wireless network at home, there is one URL that I just cannot access with my browser: http://research.microsoft.com/ I have no problems with the Internet connection otherwise. But on that address I just get The connection was reset The connection to the server was reset while the page was loading. from Firefox. I am using a DSL modem (Westell) and Linksys wireless router (using DHCP). When I use my neighbor's wireless connection I can access the microsoft site without a problem. Additional technical details: But with my connection, here is what I get from nslookup. It is weird: It first cannot find the address, but after I look up another address it can find it: $ nslookup research.microsoft.com ;; connection timed out; no servers could be reached $ nslookup google.com Non-authoritative answer: Name: google.com Address: 72.14.204.104 Name: google.com Address: 72.14.204.147 Name: google.com Address: 72.14.204.99 Name: google.com Address: 72.14.204.103 $ nslookup research.microsoft.com Non-authoritative answer: Name: research.microsoft.com Address: 131.107.65.14 But even after nslookup finds it Firefox still cannot access it. Here is what traceroute says: $ traceroute http://research.microsoft.com/ traceroute: Warning: http://research.microsoft.com/ has multiple addresses; using 8.15.7.117 traceroute to http://research.microsoft.com/ (8.15.7.117), 64 hops max, 40 byte packets 1 dslrouter.westell.com (1XX.XXX.X.X) 4.515 ms 2.760 ms 3.072 ms 2 * * * Traceroute just to the IP: $ traceroute 131.107.65.14 traceroute to 131.107.65.14 (131.107.65.14), 64 hops max, 40 byte packets 1 dslrouter.westell.com (1XX.XXX.X.X) 11.912 ms 2.684 ms 2.808 ms 2 * * * Comparison: Traceroute to google.com IP: $ traceroute 72.14.204.99 traceroute to 72.14.204.99 (72.14.204.99), 64 hops max, 40 byte packets 1 dslrouter.westell.com (1XX.XXX.X.X) 6.428 ms 6.981 ms 117.099 ms 2 * * * Any comments / help?

  Read the article

• route propogation using OSPF in a network

  - by liv2hak

  I am using Juniper J-series routers to emulate a small telco and VPN customer.The internal routing will be configured with OSPF,MPLS including a default and backup path,RSVP for distributing labels withing the telco,OSPF for distributing routes from the customer edge (CE) routers to the VRF's in the adjacent PE's and finally iBGP for distributing customer routes between VRF's in different PEs. The topology of the network is shown below. The Addressing scheme for the network is as follows. UOW-TAU ******* ge-0/0/0 192.168.3.1 TAU-PE1 ******* ge-0/0/0 10.0.1.0 ge-0/0/1 10.0.2.0 ge-0/0/2 192.168.3.2 TAU-P1 ****** ge-0/0/0 172.16.1.0 ge-0/0/1 172.16.3.1 ge-0/0/2 10.0.2.2 HAM-P1 ****** ge-0/0/0 172.16.3.2 ge-0/0/1 172.16.2.1 ge-0/0/3 10.0.3.2 ACK-P1 ****** ge-0/0/0 172.16.1.2 ge-0/0/2 172.16.2.2 ge-0/0/3 10.0.1.2 HAM-PE1 ******* ge-0/0/0 10.0.3.1 ge-0/0/2 192.168.4.2 UOW-HAM ******* ge-0/0/0 192.168.4.1 I also set up loopback address for each node. I want to setup OSPF so that path to each internal subnet and router loopback address is propogated to all PE and P nodes.I also want to select a single area for PE and P nodes,and on each node I should add each interface that should be propogated. How do I accomplish this.? With my understanding below is the procedure to achieve this.Is the below explanation correct? I set up OSPF on UOW-TAU ge-0/0/0 interface and ge-0/0/1 interface and UOW-HAM ge-0/0/0 interface and ge-0/0/1 interface. let me call this Area 100. Once I have done this I should be able to reach each node from others using ping and traceroute. Any help is highly appreciated.

  Read the article

< Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >