Search Results

Search found 3500 results on 140 pages for 'plug ins'.

Page 126/140 | < Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >

• How can I play my MP3 files through my stereo system?

  - by Joel Coehoorn

  Here's the situation. Like many others I have my entire CD collection ripped to my PC, along side other music I've acquired through iTunes or Amazon MP3. Also like many others the speakers at my PC are underpowered, and likely included in my monitor as an afterthought. This is fine for most use: system sounds, YouTube, etc. Even games sounds and music. But I'd like something a little better for when I really want to listen to music. And I have it; in the next room — barely 25 feet away as the crow flies — sits a nice 400 watts stereo system. The stereo supports MP3 CDs, so up to this point I've just kept a few CD-RW disks around to keep most of my collection available. But it's time to move on to something a little more sophisticated. What are my options for using the MP3 files available on my computer as an input for this stereo? Some notes: I want to be able to control what song the stereo is playing without having to go to the PC, including setting up and retrieving playlists. Ideally this should even be able to wake the PC from sleep mode to start playing. I primarily use Windows Media Player on the PC (which runs Windows Vista). However, the files themselves live on a server running Windows Server 2008, and so I could also install something on the server and run everything from there. The axillary input on the stereo is unfortunately limited to a 1/8 inch stereo mini-plug. I'm loath to run wires across two rooms, and I'm considering moving the stereo to the garage at some point. Therefore a wireless solution that can easily cover about 100 ft or so is preferred. I already have a Wi-Fi network ready, but it's secured so anything using Wi-Fi should make it easy to set up security. Bonus points for doing it in under $85 shipped at Amazon (I'm hoping to pay for this via $85 worth of Amazon gift cards). I know this a pretty tight budget, so just getting close is okay. Bonus points for something that remembers multiple profiles (keep my favorite songs separate from the wife's). Bonus points for a remote that can also replace my stereo remote, so I only need one device to control everything. I'm not holding my breath on this one given my price range, though. Bonus points if I can also use for Internet radio. Doing some research on my own as well. This looks like it'll do exactly what I want, but it lists at an outrageous $299: http://www.linksysbycisco.com/US/en/products/DMP100

  Read the article

• Can't set up printing from Mac OS X (10.5.7) to an HP PSC 2410 shared from PC running Ubuntu 9.10

  - by Weston C

  I've got an HP PSC 2410 printer shared from a fresh Ubuntu 9.10 installation. I'm able to send documents to this printer over the network from another Ubuntu machine. But so far, I haven't been able to find a setup where I can send documents to that printer from a MacBook running 10.5.7. On the Mac side, when setting things up, I go into System Prefs Print & Fax, click on the "+" mark, select "IP", pick "IPP", enter the IP address of the Ubuntu box, leave the queue blank, enter the Name and location, and I think it's when I get to the "Print Using" (driver selection) part that I'm running into issues. If I use "Auto Select", it defaults to "Generic PostScript Printer", which I doubt the PSC 2410 is (and sure enough, if I print, the jobs don't go through). If I try "Select a driver to use...", there's not an option for an HP PSC 2400. This seems a little odd: I can plug the printer directly into one of our Macs and it immediately figures out the driver and I can print no problem, but that's apparently the way things work. So, that leaves one option: "Other", which, when selected, brings up a dialog apparently for the purpose of manually locating a driver. I've tried visiting HP's web site. They have drivers for earlier versions of Mac OS X, but state that after 10.4, Mac OS X should just come with the relevant drivers. I've also tried setting things up by interacting with the CUPS server on the Mac through a browser: I go to http://localhost:631/, select "Add New Printer", pick "Internet Printing Protocol (http)" for the Device selection, enter "http://ubuntu.machine.ip.address:631/printers/hp-psc-2400-series" for the Device URI, select "HP" for Make, and then on the next screen, we're back to the problem where the PSC 2400 just doesn't show up. There's an option to "provide a PPD file", which I assume would be the printer driver I can't find. A Google search for "HP PSC 2410 ppd Leopard" doesn't seem to yield much other than a reminder that the printer is supposed to just work out of the box on Leopard. A local search for ".ppd" or "2410" on either Mac also doesn't yield anything that looks like a relevant print driver. I'm totally stuck at this point. Any advice?

  Read the article

• Blank displays after inactivity, mouse cursor not showing up

  - by Mike Christiansen

  I have a Windows 7 Enterprise x86 machine that is exhibiting some strange problems. After some inactivity (it varies how long it takes), when I come back to my computer, both of my monitors are black. The monitors are on, with a black display. Moving the mouse and pressing keys on the keyboard do not work. This happens at least once a day. When I first encountered the issue, I performed a hard shutdown and restarted the computer. About 10% of the time when I did this, the resolutions on my monitors were messed up. The native resolution on the primary monitor is 1600x900, and the native on my secondary is 1440x900. None of the widescreen resolutions would be present in the display properties. I had 800x600, 1024x768, and 1280x1024. As a workaround to this issue, I've found that if I plug in my secondary monitor as the primary monitor, and leave the secondary unplugged, then Windows will start in 1024x768 on the secondary. Then, I can use Windows 7's "Detect" feature and it finds the 1440x900 resolution, and sets it. Then I have to connect the primary monitor to the secondary port and set it as the primary. Then I can switch the two cables, putting the primary into the primary, the secondary into the secondary. Then use the "Detect" feature again, and it finds the correct resolutions. Some time after performing the above, I discovered that when the screens were blanked, I could simply press "Control+Alt+Delete", type in my password, and everything comes up fine - except my mouse cursor. All applications and features work as intended, except there is no mouse cursor (the mouse actually works though...). I have the "Show location of pointer when I press CTRL key" option selected, so I can press CTRL and use my mouse as normal - but I have no actual cursor. When the computer is in this state, UAC is also not functional. Whenever a UAC prompt appears, the screens go black (the original symptoms) and I have to press Escape to exit UAC. Because of the above symptoms (the UAC black screen thing, etc) I beleive winlogon.exe may be the culprit. However, I have no idea how to fix it. I am unable to restart winlogon.exe due to the problems I am having with winlogon.exe (the UAC black screen) Looking for any ideas.... More information Windows 7 x86 Enterprise Domain environment (I have a secondary account with administrator rights) Dell Optiplex 960 Cannot perform "optional" windows updates due to an activation issue (I am testing a windows 7 image, and an activation infrastructure has not been created yet. However, this issue was happening before I was unable to perform windows update, and windows was up to date at the time Updated video card driver (as an attempt to fixing the resolution issue) Disabled all power saving options Please let me know what else you need to help me solve this issue! Thanks in advance, Mike

  Read the article

• Use a certain select statement in a stored procedure depending on the Exec statement

  - by MyHeadHurts

  Alright so i am not even sure if this is possible I have a q_00 and q_01 and q_02 which are all in my stored procedure. then on the bottom i have 3 select statements that select a certain catagory for example Sales,Net Sales and INS sales What i want to be able to do is if the user types exec (name of my sp) (sales) (and a year which is the @yearparameter) it will run the sales select statement If they type Exec (name of my SP) netsales (@Yeartoget) it will show the net sales is this possible or do i need multiple stored procedures ALTER PROCEDURE [dbo].[casof] @YearToGet int as ; with q_00 as ( select DIVISION , SDESCR , DYYYY , sum(APRICE) as asofSales , sum(PARTY) as asofPAX , sum(NetAmount) as asofNetSales , sum(InsAmount) as asofInsSales , sum(CancelRevenue) as asofCXSales , sum(OtherAmount) as asofOtherSales , sum(CXVALUE) as asofCXValue from dbo.B101BookingsDetails where Booked <= CONVERT(int,DateAdd(year, @YearToGet - Year(getdate()), DateAdd(day, DateDiff(day, 1, getdate()), 0))) and DYYYY = @YearToGet group by DIVISION, SDESCR, DYYYY ), q_01 as ( select DIVISION , SDESCR , DYYYY , sum(APRICE) as YESales , sum(PARTY) as YEPAX , sum(NetAmount) as YENetSales , sum(InsAmount) as YEInsSales , sum(CancelRevenue) as YECXSales , sum(OtherAmount) as YEOtherSales , sum(CXVALUE) as YECXValue from dbo.B101BookingsDetails where DYYYY=@YearToGet group by DIVISION, SDESCR, DYYYY ), q_02 as ( select DIVISION , SDESCR , DYYYY , sum(APRICE) as CurrentSales , sum(PARTY) as CurrentPAX , sum(NetAmount) as CurrentNetSales , sum(InsAmount) as CurrentInsSales , sum(CancelRevenue) as CurrentCXSales , sum(OtherAmount) as CurrentOtherSales , sum(CXVALUE) as CurrentCXValue from dbo.B101BookingsDetails where Booked <= CONVERT(int,DateAdd(year, (year( getdate() )) - Year(getdate()), DateAdd(day, DateDiff(day, 1, getdate()), 0))) and DYYYY = (year( getdate() )) group by DIVISION, SDESCR, DYYYY ) select a.DIVISION , a.SDESCR , a.DYYYY , asofSales , asofPAX , YESales , YEPAX , CurrentSales , CurrentPAX , asofsales/ ISNULL(NULLIF(yesales,0),1) as percentsales , asofpax/yepax as percentpax ,currentsales/ISNULL(NULLIF((asofsales/ISNULL(NULLIF(yesales,0),1)),0),1) as projectedsales ,currentpax/ISNULL(NULLIF((asofpax/ISNULL(NULLIF(yepax,0),1)),0),1) as projectedpax from q_00 as a join q_01 as b on (b.DIVISION = a.DIVISION and b.SDESCR = a.SDESCR and b.DYYYY = a.DYYYY) join q_02 as c on (b.DIVISION = c.DIVISION and b.SDESCR = c.SDESCR) order by a.DIVISION, a.SDESCR, a.DYYYY ; select a.DIVISION , a.SDESCR , a.DYYYY , asofPAX , asofNetSales , YEPAX , YENetSales , CurrentPAX , CurrentNetSales , asofnetsales/ ISNULL(NULLIF(yenetsales,0),1) as percentnetsales , asofpax/yepax as percentpax ,currentnetsales/ISNULL(NULLIF((asofnetsales/ISNULL(NULLIF(yenetsales,0),1)),0),1) as projectednetsales ,currentpax/ISNULL(NULLIF((asofpax/ISNULL(NULLIF(yepax,0),1)),0),1) as projectedpax from q_00 as a join q_01 as b on (b.DIVISION = a.DIVISION and b.SDESCR = a.SDESCR and b.DYYYY = a.DYYYY) join q_02 as c on (b.DIVISION = c.DIVISION and b.SDESCR = c.SDESCR) order by a.DIVISION, a.SDESCR, a.DYYYY ; select a.DIVISION , a.SDESCR , a.DYYYY , asofPAX , asofInsSales , YEPAX , YEInsSales , CurrentPAX , CurrentInsSales , asofinssales/ ISNULL(NULLIF(yeinssales,0),1) as percentsales , asofpax/yepax as percentpax ,currentinssales/ISNULL(NULLIF((asofinssales/ISNULL(NULLIF(yeinssales,0),1)),0),1) as projectedinssales from q_00 as a join q_01 as b on (b.DIVISION = a.DIVISION and b.SDESCR = a.SDESCR and b.DYYYY = a.DYYYY) join q_02 as c on (b.DIVISION = c.DIVISION and b.SDESCR = c.SDESCR) order by a.DIVISION, a.SDESCR, a.DYYYY ;

  Read the article

• Why wont my if statement work, in my stored procedure

  - by MyHeadHurts

  Alright so i am not even sure if this is possible I have a q_00 and q_01 and q_02 which are all in my stored procedure. then on the bottom i have 3 select statements that select a certain catagory for example Sales,Net Sales and INS sales What i want to be able to do is if the user types exec (name of my sp) (sales) (and a year which is the @yearparameter) it will run the sales select statement If they type Exec (name of my SP) netsales (@Yeartoget) it will show the net sales is this possible or do i need multiple stored procedures ALTER PROCEDURE [dbo].[casof] @YearToGet int, @mode VARCHAR(20) as ; with q_00 as ( select DIVISION , SDESCR , DYYYY , sum(APRICE) as asofSales , sum(PARTY) as asofPAX , sum(NetAmount) as asofNetSales , sum(InsAmount) as asofInsSales , sum(CancelRevenue) as asofCXSales , sum(OtherAmount) as asofOtherSales , sum(CXVALUE) as asofCXValue from dbo.B101BookingsDetails where Booked <= CONVERT(int,DateAdd(year, @YearToGet - Year(getdate()), DateAdd(day, DateDiff(day, 1, getdate()), 0))) and DYYYY = @YearToGet group by DIVISION, SDESCR, DYYYY ), q_01 as ( select DIVISION , SDESCR , DYYYY , sum(APRICE) as YESales , sum(PARTY) as YEPAX , sum(NetAmount) as YENetSales , sum(InsAmount) as YEInsSales , sum(CancelRevenue) as YECXSales , sum(OtherAmount) as YEOtherSales , sum(CXVALUE) as YECXValue from dbo.B101BookingsDetails where DYYYY=@YearToGet group by DIVISION, SDESCR, DYYYY ), q_02 as ( select DIVISION , SDESCR , DYYYY , sum(APRICE) as CurrentSales , sum(PARTY) as CurrentPAX , sum(NetAmount) as CurrentNetSales , sum(InsAmount) as CurrentInsSales , sum(CancelRevenue) as CurrentCXSales , sum(OtherAmount) as CurrentOtherSales , sum(CXVALUE) as CurrentCXValue from dbo.B101BookingsDetails where Booked <= CONVERT(int,DateAdd(year, (year( getdate() )) - Year(getdate()), DateAdd(day, DateDiff(day, 1, getdate()), 0))) and DYYYY = (year( getdate() )) group by DIVISION, SDESCR, DYYYY ) IF @mode = 'sales' select a.DIVISION , a.SDESCR , a.DYYYY , asofSales , asofPAX , YESales , YEPAX , CurrentSales , CurrentPAX , asofsales/ ISNULL(NULLIF(yesales,0),1) as percentsales , asofpax/yepax as percentpax ,currentsales/ISNULL(NULLIF((asofsales/ISNULL(NULLIF(yesales,0),1)),0),1) as projectedsales ,currentpax/ISNULL(NULLIF((asofpax/ISNULL(NULLIF(yepax,0),1)),0),1) as projectedpax from q_00 as a join q_01 as b on (b.DIVISION = a.DIVISION and b.SDESCR = a.SDESCR and b.DYYYY = a.DYYYY) join q_02 as c on (b.DIVISION = c.DIVISION and b.SDESCR = c.SDESCR) order by a.DIVISION, a.SDESCR, a.DYYYY ; else if @mode= 'netsales' select a.DIVISION , a.SDESCR , a.DYYYY , asofPAX , asofNetSales , YEPAX , YENetSales , CurrentPAX , CurrentNetSales , asofnetsales/ ISNULL(NULLIF(yenetsales,0),1) as percentnetsales , asofpax/yepax as percentpax ,currentnetsales/ISNULL(NULLIF((asofnetsales/ISNULL(NULLIF(yenetsales,0),1)),0),1) as projectednetsales ,currentpax/ISNULL(NULLIF((asofpax/ISNULL(NULLIF(yepax,0),1)),0),1) as projectedpax from q_00 as a join q_01 as b on (b.DIVISION = a.DIVISION and b.SDESCR = a.SDESCR and b.DYYYY = a.DYYYY) join q_02 as c on (b.DIVISION = c.DIVISION and b.SDESCR = c.SDESCR) order by a.DIVISION, a.SDESCR, a.DYYYY ; ELSE IF @mode = 'inssales' select a.DIVISION , a.SDESCR , a.DYYYY , asofPAX , asofInsSales , YEPAX , YEInsSales , CurrentPAX , CurrentInsSales , asofinssales/ ISNULL(NULLIF(yeinssales,0),1) as percentsales , asofpax/yepax as percentpax ,currentinssales/ISNULL(NULLIF((asofinssales/ISNULL(NULLIF(yeinssales,0),1)),0),1) as projectedinssales from q_00 as a join q_01 as b on (b.DIVISION = a.DIVISION and b.SDESCR = a.SDESCR and b.DYYYY = a.DYYYY) join q_02 as c on (b.DIVISION = c.DIVISION and b.SDESCR = c.SDESCR) order by a.DIVISION, a.SDESCR, a.DYYYY ;

  Read the article

• Wake On Lan only works on first boot, not sequent ones

  - by sp3ctum

  I have converted my old Dell Latitude D410 laptop to a server for tinkering. It is running an updated Debian Squeeze (6) with a Xen enabled kernel (I want to toy with virtual machines later on). I am running it 'headless' via an ethernet connection. I am struggling to enable Wake On Lan for the box. I have enabled the setting in the BIOS, and it works nicely, but only for the first time after the power cord is plugged in. Here is my test: Plug in power cord, don't boot yet Send magic Wake On Lan packet from test machine (Ubuntu) using the wakeonlan program Server expected to start (does every time) Once server has booted, log in via ssh and shut it down via the operating system After shutdown, wake server up via WOL again (fails every time) Some observations: Right after step 1 I can see the integrated NIC has a light on. I deduce this means the NIC gets adequate power and that the ethernet cable is connected to my switch. This light is not on after step 4 (the shutdown stage). The light becomes back on after I disconnect and reconnect the power cord, after which WOL works as well. After step 4 I can verify that wake on lan is enabled via the ethtool program (repeatable each time) This blog post suggested the problem may lay in the fact the motherboard might not be giving adequate power to the NIC after shutdown, so I copied an acpitool script that supposedly should signal the system to give the needed power to the card when shut down. Obviously it did not fix my issue. I have included the relevant power settings in the paste below. I have tried different combinations of parameters of shutdown (the program) options, as well as the poweroff program. I even tried "telinit 0", which I figured would do the most direct boot via software. If I keep the laptop's power button pressed down and do a hard boot this way, the light on the ethernet port stays lit and a WOL is possible. I copied a bunch of hopefully useful information in this paste I have tried this with the laptop battery connected and without it. I get the same result. Promptly pressing the power button causes the system to shut down with the message "The system is going down for system halt NOW!", and WOL is still unsuccessful.

  Read the article

• Win7 x64 unresponsive for a minute or so. HD failing?

  - by Gaia

  On a fully updated Win7 x64, every so often the system stalls for a minute or so. This has been going on for a couple months now. By stalling I mean the mouse responds and I can move windows around, but any window, any program, that is open becomes whiteish when I select it AND any new programs will not open. It doesn't matter what kind of program it is. When the stall stops all clicks I made (open new programs for example) take effect. Nothing shows up consistently (as in every time this happens) in the event log. Today though I was able to find something, but it doesn't reveal much other than the "system was unresponsive". It's a 7009 for "A timeout was reached (30000 milliseconds) while waiting for the Windows Error Reporting Service service to connect." It doesn't matter if I have any USB devices plug-in or not. I've ran Microsoft Security Essentials and Malwarebytes. While the machine is unresponsive, I've noticed that Drive D (the other partition on the single internal HD in this laptop) is displayed like this in explorer. This never occurs with Drive C or any other drive on the machine. . SMART report for the physical drive: Read benchmark by HD Tune 5 Pro, probably the most telling piece of the puzzle. Isn't this alone enough to see there is a problem with the drive, regardless of whether the unresponsiveness is caused by such purported problem? Here is a short hardware report: Computer: LENOVO ThinkPad T520 CPU: Intel Core i5-2520M (Sandy Bridge-MB SV, J1) 2500 MHz (25.00x100.0) @ 797 MHz (8.00x99.7) Motherboard: LENOVO 423946U Chipset: Intel QM67 (Cougar Point) [B3] Memory: 8192 MBytes @ 664 MHz, 9.0-9-9-24 - 4096 MB PC10600 DDR3 SDRAM - Samsung M471B5273CH0-CH9 - 4096 MB PC10600 DDR3 SDRAM - Patriot Memory (PDP Systems) PSD34G13332S Graphics: Intel Sandy Bridge-MB GT2+ - Integrated Graphics Controller [D2/J1/Q0] [Lenovo] Intel HD Graphics 3000 (Sandy Bridge GT2+), 3937912 KB Drive: ST320LT007, 312.6 GB, Serial ATA 3Gb/s Sound: Intel Cougar Point PCH - High Definition Audio Controller [B2] Network: Intel 82579LM (Lewisville) Gigabit Ethernet Controller Network: Intel Centrino Advanced-N 6205 AGN 2x2 HMC OS: Microsoft Windows 7 Professional (x64) Build 7601 The drive less than 1 year old. Do I have a defective drive? Seagate Tools diag says there is nothing wrong with the drive... UPDATE: I noticed that the windows error reporting service entered the running state then the stopped state and the space between the two events was exactly 2 minutes. Which error it was trying to report I don't know. I check the "Reliability Monitor" and it shows no errors to be reported. I've disabled the windows error reporting service to see if the problem stops.

  Read the article

• Silverlight? WPF? or Windows Form?

  - by Amit

  After Silverlight 4.0 has been released with new WPF, I am kind of confused with these technologies: Silverlight? WPF? Windows Form? The main motive that we want to achieve for BIG business project is following: Performance Security And platform independent** If I consider all above three points then only Silverlight is the option as I don’t want people buying emulator on MacOS for WPF or Windows Form. Now how good the Silverlight is for Business applications, I was completely against when Silverlight 2.0 was in the market but now it is Silverlight 4.0 and they have provided many new features (but still basics) that is required in any challenging business applications. Comparing Silverlight and WPF -* Silverlight and WPF are very new technology and if I'd to compare from these two then I'd prefer WPF because it can be considered stable and mature. But it is not same as Windows Form. -* If I go with Silverlight then I am sure about keep updating to the latest version of Silverlight. I remembered when we were developing software for version 2.0 then we'd to create our own framework with dynamic loading DLL, and then Navigation concept. But everything was got changed once Silverlight 3.0 came. I don't want this to be happening with this new product. -* If we go with WPF then we don't get the platform independence. Now, why not we just focus on making WPF and then move to Silverlght. As someone (Tim?) from Microsoft has said that the idea is to make Silverlight as close as WPF. But if that is the case then why XAML structure is different; I will not be convinced with by saying that .Net framework for SL is too small.. well the difference is coming from the namespace ? I was searching on this subject and found "Microsoft WPF-Silverlight Comparison Whitepaper v1.1.pdf". This guide is very good that gives you ins-outs about how can we build common apps that runs on both. But again, it is comparing Silverlight 2 and not 4. I am sure many architect/ developers/ project managers must be facing similar kind of questions in their premises and wants to initiate this discussion, if it has not been :). We've still got 2 weeks to make this decision, so I'm expecting everyone to participate, gurus?

  Read the article

• Favorite Visual Studio keyboard remappings?

  - by hoytster

  Stack Overflow has covered favorite short-cuts and add-ins, optimizations and preferences -- great topics all. If this one has been covered, I can't find it -- so thanks in advance for the link. What are your favorite Visual Studio keyboard remappings? Mine are motivated by the fact that I'm a touch-typist. Mouse, function keys, arrow keys, Home, End -- bleh. These are commands I do all day every day, so I've remapped them to sequences I can execute without moving my hands from the home row. The command that is remapped in Tools = Customize = [Keyboard] is shown in parentheses. I'm 100% positive that there are better remappings than these, so please post yours! Please include the command; oft times, figuring it out is a challenge. -- Hoytster Running the app and operating the debugger Ctrl+Q + Ctrl+R Run the application, in debug mode (Debug.Start) Ctrl+Q + Ctrl+Q Quit (stop) the application (Debug.StopDebugging) Ctrl+T Toggle a breakpoint at the current line (Debug.ToggleBreakpoint) Ctrl+K + Ctrl+I Step Into the method (Debug.StepInto) Ctrl+K + Ctrl+O Step Out of the method (Debug.StepOut) Ctrl+N Step over the method to the Next statement (Debug.StepOver) Ctrl+K + Ctrl+C Run the code, stopping at the Cursor position (Debug.RunToCursor) Ctrl+K + Ctrl+E Set then next statement to Execute (Debug.SetNextStatement) Navigating the code Ctrl+S Move a character LEFT (Edit.CharLeft) Ctrl+D Move a character RIGHT (Edit.CharRight) Ctrl+Q + Ctrl+S Move to the LEFT END of the current line (Edit.LineStart) Ctrl+Q + Ctrl+D Move to the RIGHT END of the current line (Edit.LineEnd) Ctrl+E Move a line UP (Edit.LineUp) Ctrl+X Move a line DOWN (Edit.LineDown) Ctrl+K + Ctrl+K Toggle (add or remove) bookmark (Edit.ToggleBookmark) Ctrl+K + Ctrl+N Move to the NEXT bookmark (Edit.NextBookmark) Ctrl+K + Ctrl+P Move to the PREVIOUS bookmark (Edit.PreviousBookmark) Ctrl+Q + Ctrl+W Save all modified Windows (File.SaveAll) Ctrl+L Find the NEXT instance of the search string (Edit.FindNext) Ctrl+K + Ctrl+L Find the PREVIOUS instance of the search string (Edit.FindPrevious) Ctrl+Q + Ctrl+L Drop down the list of open files (Window.ShowEzMDIFileList) The last sequence is like clicking the downward-facing triangle in the upper-right corner of the code editor window. VS will display a list of all the open windows. You can select from the list by typing the file name; the matching file will be selected as you type. Pause for a second and resume typing, and the matching process starts over, so you can select a different file. Nice, VS Team. The key takes you to the tab for the selected file.

  Read the article

• Generating/managing config files for hosted application

  - by mfinni

  I asked a question about config management, and haven't seen a reply. It's possible my question was too vague, so let's get down to brass tacks. Here's the process we follow when onboarding a new customer instance into our hosted application : how would you manage this? I'm leaning towards a Perl script to populate templates to generate shell scripts, config files, XML config files, etc. Looking briefly at CFengine and Chef, it seems like they're not going to reduce the amount of work, because I'd still have to manually specify all of the changes/edits within the tool. Doesn't seem to be much of a gain over touching the config files directly. We add a stanza to the main config file for the core (3rd-party) application. This stanza has values that defines the instance (customer) name the TCP listener port for this instance (not one currently used) the DB2 database name (serial numeric identifier, already exists, they get prestaged for us by the DBAs) three sub-config files, by name - they need to be created from 3 templates and be named after the instance The sub-config files define: The filepath for the DB2 volumes The filepath for the storage of objects The filepath for just one of the DB2 volumes (yes, redundant to the first item. We run some application commands, start the instance We do some LDAP thingies (make an OU for the instance, etc.) We add a stanza to the config file for our security listener that acts as a passthrough to LDAP instance name LDAP OU TCP port for instance DB2 database name We restart the security listener (off-hours), change the main config file from item 1, stop and restart the instance. It is now authenticating via LDAP. We add the stop and start commands for this instance to the HA failover scripts. We import an XML config file into the instance that defines things for the actual application for the customer - user names, groups, permissions, and business rules. The XML is supplied by the implementation team. Now, we configure the dataloading application We add a stanza to the existing top-level config file that points to a new customer-level config file. The new customer-level config file includes: the instance (customer) name the DB2 database name arbitrary number of sub-config files, by name Each of the sub-config files defines: filepaths to the directories for ingestion, feedback, backup, and failure those filepaths have a common path to a customer-specific folder, and then one folder for each sub-config file Each of those filepaths needs to be created We need to add this customer instance to our monitoring scripts that confirm the proper processes are running and can be logged into. Of course, those monitoring config files include the instance name, the TCP port, the DB2 database name, etc. There's also a reporting application that needs to be configured for the new instance. You get the idea. There's also XML that is loaded into WAS by the middleware team. We give them the values for them to plug into the XML - they could very easily hand us the template and we could give them back completed XML.

  Read the article

• Unable to delete all partitions on flash drive using Windows 7 OS??

  - by irrational John

  Recently I purchased an ADATA C802 8GB flash drive. Since the drive was new I decided to run some of the HD Tune Pro (v4.50) performance tests on it, mostly just for the heck of it. To avoid accidently destroying data HD Tune refuses to write to a drive unless there are no partitions on the drive. If you do attempt to write to a drive with partitions, it posts the message "Writing is disabled. To enable writing please remove all partitions." As you would expect, the ADATA came formatted with a single primary FAT32 partition in the Master Boot Record. But a number of unexpected things happened when I attempted to delete that partition. The first thing I tried was to use the Windows 7 (64-bit) Disk Management tool (diskmgmt.msc) to delete the partition. It would not let me. The context menu choice to delete that volume was not available. Next I opened up a command prompt window with Admin authority and ran diskpart. Diskpart deleted the volume for me. However, when I attempted to run an HD Tune write test on the drive I still got the "Writing is disabled" message. Huh??? So I fired up a utility I have which allows viewing drives at the sector level and verified that the partition table in the Master Boot Record was empty. No partitions. Yet HD Tune still thought there were partitions on the drive? So why was I still getting the "Writing is disabled" message from HD Tune Pro? And why wouldn't the Windows 7 Disk Management tool let me change the partitions on this drive. After doing the above, I plugged the ADATA into my MacBook. I was then able to format it as either a GPT or MBR partitioned drive with no problems. I am not looking for suggestions on how to format this drive. I can do that. What I do not understand and was hoping I might get insight into is why this drive behaves so strangely under Windows 7? And BTW, what's up with HD Tune Pro? BTW, if I plug the drive I formatted on my MacBook back into my Windows 7 64-bit system I still run into road blocks with the Disk Management tool. For example, I cannot delete all the GPT partitions on the ADATA so I can convert it into an MBR drive. I following Microsoft's instructions, the instructions just do not work with this ADATA flash drive. Anyone know what's up with this? It makes no sense to me. Has something changed in Windows 7 (Vista)??

  Read the article

• What is it that kills laptop batteries?

  - by Mala

  There are many superstitions on what you must never do lest your battery become worthless - and by worthless I mean hold about 16 - 24 seconds of charge. This has happened to every laptop I have ever owned, and I just got a new one, so please help me sort out fact from fiction. Here are some of the things I've heard: Do not keep your laptop fully charged. You must run it completely down every so often. Do not use your laptop plugged in to the wall. Only plug it in when it needs charge. If you will not be using your laptop for a long period of time, don't leave it at full charge. Do not leave your laptop running 24/7. The first two I know to be complete fiction: this was true of old batteries such as you might have had in an iPod in 2003, but modern batteries function better when kept at or near full charge. Devices even have circuitry to prevent you from completely depleting your battery, as this is dangerous. The third point sounds probable, and I'd be interested to know if it was true. However, it doesn't really apply to me because I'm not really the type to leave my laptop alone for a day, much less a "long period of time" The fourth seems most likely of the above, but only because of causality: I have always done this, and my batteries have always crapped out on me. I've generally treated a laptop like a desktop with a battery backup, and that I can move from one room to another if necessary. The fact that my batteries tend to last less than 30 seconds has further entrenched this behavior. Should I be trying to break this habit? Are there any other things that ruin laptop batteries? I love that I can actually use my new laptop unplugged :) I'd like to keep it that way. Update: Additional question: If the computer will be used for an extended period of time plugged in, does it make sense to remove the battery first? Update 2: I know people with laptops older than mine, who actively use their laptops as much as I do, and their batteries still hold about an hours' charge while mine holds less than 30 seconds, hence my belief that something I'm doing kills them.

  Read the article

• LACP : Cisco ASA 5515 & Switch ProCurve 2920

  - by user979276

  I've two ASAs 5515 connected in failover Active/Stand by (on Gi0/5) My two ASAs are connected to two Switch ProCurve 2920 to have HA if something happens. So I plug something like that (don't pay attention to the arrows) : So one the ASA, I created a Port-Channel like that : interface GigabitEthernet0/0 nameif outside security-level 0 ip address 192.168.1.3 255.255.255.0 standby 192.168.1.4 ! interface GigabitEthernet0/1 speed 1000 duplex full channel-group 1 mode passive no nameif no security-level no ip address ! interface GigabitEthernet0/2 speed 1000 duplex full channel-group 1 mode passive no nameif no security-level no ip address ! interface Port-channel1.1 vlan 1 nameif inside security-level 100 ip address 192.168.8.1 255.255.255.0 standby 192.168.8.2 ! interface Port-channel1.10 vlan 10 nameif guest security-level 50 ip address 172.16.100.2 255.255.255.224 standby 172.16.100.3 ! interface Port-channel1.16 vlan 16 nameif dmz security-level 50 ip address 192.168.16.1 255.255.255.0 standby 192.168.16.2 On the switch, I created a trunk LACP capable with the port 1 and 2 on each switch, force the speed to 1000 and put the port un full duplex mode. BUT this is not working... I tried many things and I can't make it work. In this configuration, I can't ping anything between my ASA and my Switch (or any object connected). Here what I get on my ASA : Channel group 1 LACP port Admin Oper Port Port Port Flags State Priority Key Key Number State ----------------------------------------------------------------------------- Gi0/2 SP not-bndl 32768 0x1 0x1 0x3 0xc Gi0/1 FP not-bndl 32768 0x1 0x1 0x2 0x6 And on the Switchs : PORT LACP TRUNK PORT LACP LACP NUMB ENABLED GROUP STATUS PARTNER STATUS ----- ------- ----- ------ ------- ------ 1 Active trk1 Broken Yes Failure 2 Active trk1 Broken Yes Failure If I change the Cisco interface to LACP mode On, I can ping the switch from the ASA but nothing other objects conneted on the switch. If I look at the statut of LACP on the switch I see this : PORT LACP TRUNK PORT LACP LACP NUMB ENABLED GROUP STATUS PARTNER STATUS ----- ------- ----- ------ ------- ------ 1 Active trk1 Up No Success 2 Active trk1 Up No Success I don't have any clue on what's going on so If someone have any idea and help me on this, it would be great ! Feel free to ask me anything if you need any more information ! Thanks a lot !

  Read the article

• Problem in Fetching Table contents when adding rows in same table

  - by jasmine

  Im trying to write a function for adding category: function addCategory() { $cname = mysql_fix_string($_POST['cname']); $kabst = mysql_fix_string($_POST['kabst']); $kselect = $_POST['kselect']; $kradio = $_POST['kradio']; $ksubmit = $_POST['ksubmit']; $id = $_POST['id']; if($ksubmit){ $query = "INSERT INTO category VALUES (' ', '{$cname}', '{$kabst}', {$kselect}, {$kradio}, ' ') "; $result = mysql_query($query); if ($result) { echo "ok"; } else{ echo $query ; } } $text .= '<div class="form"> <h2>ADD new category</h2> <form action="?page=addCategory" method="post"> <ul> <li><label>Category</label></li> <li><input name="cname" type="text" class="inp" /></li> <li><label>Description</label></li> <li><textarea name="kabst" cols="40" rows="10" class="inx"></textarea></li> <li>Published:</li> <li> <select name="kselect" class="ins"> <option value="1">Active</option> <option value="0">Passive</option> </select> </li> <li>Show in home page:</li> <li> <input type="radio" name="kradio" value="1" /> yes <input type="radio" name="kradio" value="0" /> no </li> <li>Subcategory of</li> <li> <select>'; while ($row = mysql_fetch_assoc(mysql_query("SELECT * FROM category"))){ $text .= '<option>'.$row['name'].'</option>'; } $text .= '</select> </li> <li><input name="ksubmit" type="submit" value="ekle" class="int"/></li> </ul> </form> '; return $text;} And the error: Fatal error: Maximum execution time of 30 seconds exceeded What is wrong in my function?

  Read the article

• Default Critique branch office setup: VPNTunnel->HQ, subnets for VOIP/PC, + several Q's

  - by CHickenTaragon

  We're setting up a new branch office. * ~10 users. * Each user has a VOIP phone provided by a hosted solution. * Users need access to resources on HQ (located in another state), so setting up VPN tunnel * HQ only supports certain Cisco/Juniper devices. VOIP provider only supports SonicWall, so current plan is to have two routers w/ separate subnets for VOIP vs. PC traffic. * PC's will plug into pass-thru Ethernet jacks on the VOIP phones, but the phones vs. PC's will point to different subnets. * Cable Modem is 50Mbps / 5Mbps DOCSIS 3.0 business line w/ 5 static IP's. * Each of the 2 subnets will map to one of the 5 public IP's. * May or may not also need to support a VPN tunnel with a second branch office because of a file server they have there that some in the new office use. I'm pushing to have them move the files to a server on the HQ's network so we don't have to worry about setting up an additional tunnel. Questions: Do you foresee any issues with the below set-up? Router recommendations by HQ IT staff: Cisco Router 2811, or Juniper SSG5 or SSG20. Any recommendations about these routers? We need Wi-Fi too – looks like the above routers have models that support this, any reason not to use this? Users need to be able to work from home. If so, how is authentication handled? Right now we use AD credentials for the HQ's domain, but we currently don't plan to have an AD system in the new location since it's only 10 users. We can't tie the authentication system from the new location's router to the AD system of the HQ. All the PC's that will be in the new location are currently in the existing office that is closing down, and are already joined to the domain of the HQ. Please confirm: this + the VPN tunnel will be sufficient for them to connect to authenticated resources on the HQ's network from the new location, correct? Mainly SQL servers and file servers, and a few remote desktop sessions. I'm sure I'll have some more questions, but can't think of them right now.

  Read the article

• File copying software to do this kind of work... in Windows 7 32 bit

  - by Senthil

  I need a software (Windows 7 32bit) to help me in this process: I have my documents, music, video clips, movies, pictures in my hard disk. These will not be scattered around the system. But will be inside C:\Senthil\ At the end of every week, I want to plug in an external hard disk and run a software that should make sure whatever is inside C:\Senthil\ is also present in the external disk. Files deleted from C:\Senthil\ should be deleted there, and new files should be copied etc... at the end of the process, every bit inside the source folder in my internal disk should be inside my external disk. A couple of important requirements and points: I do NOT need multiple versions or historic versions. I don't need the previous versions of my files. I only want the latest copy to be present in my "backup". Incremental backup makes sense. If files were not touched since the last backup, it need not copy. The size of my folder will run into GBs and in a year or two will go into TBs. But I will make sure the size of the external HDD is equal to or bigger than my source folder. I do not want it to run automatically because when I accidentally delete a file in my source, it will delete the one in the backup (I know this is why we have versioning facilities). I just want to be able to run it manually so that I am in control of when the backup is made and what is backed up and I should be able to pick something from the backup and restore it to the source folder in the above situation. Is there any software that will let me do exactly this? I don't want any other "smart" facility of the software to interfere with this process. I know what I want and the software can keep its smartness to itself :D The main reason I am asking this question is, I am a software developer and I can write this software myself. But I am a little constrained by time at the moment and I want to know if there is an existing program that can do this. Kindly don't worry about earthquakes or fire or snowstorms and bring up the "in case of a natural disaster your backup will also be in the damage zone and will be lost" argument because: I will have bigger things to worry about than my holiday memories. I don't think I will digitally store any life-ruining documents. This backup is only to avoid the inconvenience of obtaining a new copy of stuff that I have. Not to protect them against the end of the world. I am more worried about power surges in my area frying my system, hard disk failure, children who merrily hit Delete or teens who hit Shift + Delete or myself getting a little careless at times! In short: Is there a file/folder syncing software that listens to what I say and doesn't try to act smart? Please forgive me if I sound arrogant :)

  Read the article

• Can mono produce valid xhtml?

  - by z-boss

  I installed Mono and MonoDevelop 2.2 on my Windows PC. Created a default C# ASP.NET Web Application project. Here's the Default.aspx it created: <%@ Page Language="C#" Inherits="test.Default" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html> <head runat="server"> <title>Default</title> </head> <body> <form id="form1" runat="server"> <asp:Button id="button1" runat="server" Text="Click me!" OnClick="button1Clicked" /> </form> </body> </html> When I run it it feeds this html to the browser: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html> <head><title> Default </title></head> <body> <form name="form1" method="post" action="Default.aspx" id="form1"> <div> <input type="hidden" name="__VIEWSTATE" id="__VIEWSTATE" value="/wEPDwUKMTQ2OTkzNDMyMWRkjWseIg+2HCgaNiY+XHmVKEq/CFg=" /> </div> <div> <input type="hidden" name="__EVENTVALIDATION" id="__EVENTVALIDATION" value="/wEWAgLB5qLABwKs34rGBvJAYc3UJn3AcjSPjq8DVpMxclAk" /> </div> <input type="submit" name="button1" value="Click me!" id="button1" /> </form> </body> </html> XHTML validation fails with 3 errors: 1. Line 3, Column 1: Missing xmlns attribute for element html. The value should be: http://www.w3.org/1999/xhtml 2. Line 8, Column 13: there is no attribute "name" 3. Line 17, Column 71: document type does not allow element "input" here; missing one of "p", "h1", "h2", "h3", "h4", "h5", "h6", "div", "pre", "address", "fieldset", "ins", "del" start-tag Is there some setting I'm missing?

  Read the article

• Problem with several USB devices on Windows XP. How to diagnose USB device?

  - by Lukasz Baran

  Hello All, Recently I've bought some electronic devices (like e.g. Sony Ebook reader PRS-600 or HP PDA IPaq) which are connected to PC using USB ports. These devices have own batteries and they are recharged using USB. However, I am experiencing a problem with Ebook Reader and the similiar thing happens with my PDA (but in this case it's more rare). Sometimes, I am unable to make it start recharging, when it's connected to USB port. The LCD diode on my Reader lights up and the icon in the system tray appears. They both indicate that the device has been connected. However, the device should start recharching and it should appear on Windows XP as a 'explorable' device (just like pendrive it offers some HDDs). None of these happens:( This problem appears on two PCs - desktop and laptop. Both have Windows XP SP3 installed. And what's interesting and surprising to me is the fact that these devices sometimes work without any problems. I mean, I just plug them in and they work properly. Besides that, there are some computers (I have tested a variety of possible conditions) on which the problem does not appear! I am confused and, on the other hand, determined to find out what is the real cause of such strange behavior. Maybe I'm wrong but I always assumed that I'm using deterministic machines, but the described situation makes me feel like I was dreaming:) And that's why I'm asking you here. Are there any tools that could help me diagnose USB ports? Or maybe anyone knows the solution? I have a lot experience with low level programming (mostly from the times of MS-DOS applications), but I'm not an expert when it comes to WinXP technology. If this was a problem with network connection, I would know what to do - I know how to track network traffic, but with USB ports I feel powerless. I have a feeling that the problem may lie in a way WinXP handles USB devices. Personally, I hate auto-discovery and P'n'P features available in Windows. I know that some of may suggest to move to Linux or other *Nix system. Unfortunately, I have to use WinXP in my professional life, so it's rather impossible. Besides that, I don't consider XP as a total disaster. Any help from you will be appreciated!

  Read the article

• Ubuntu stopped recognizing my iPod

  - by flashnode

  Rythmbox on Ubuntu 10.10 used to recognize my 3rd gen Nano and transfer mp3s. Now I plug it in and Ubuntu doesn't pop-up that box that asks what you want to do anymore. It is only recognized if I reboot and the thing is plugged in. Here is the output to 'lsusb -v -s bus:device' Bus 001 Device 008: ID 05ac:1262 Apple, Inc. iPod Nano 3.Gen Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05ac Apple, Inc. idProduct 0x1262 iPod Nano 3.Gen bcdDevice 0.01 iManufacturer 1 Apple Inc. iProduct 2 iPod iSerial 3 000A27001A670128 bNumConfigurations 2 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 149 bNumInterfaces 3 bConfigurationValue 2 iConfiguration 4 iPod USB Interface bmAttributes 0xc0 Self Powered MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol 0 iInterface 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 1 (HEADER) bcdADC 1.00 wTotalLength 30 bInCollection 1 baInterfaceNr( 0) 1 AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 1 wTerminalType 0x0201 Microphone bAssocTerminal 2 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 2 wTerminalType 0x0101 USB Streaming bAssocTerminal 1 bSourceID 1 iTerminal 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 2 bDelay 1 frames wFormatTag 1 PCM AudioStreaming Interface Descriptor: bLength 35 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 2 bSubframeSize 2 bBitResolution 16 bSamFreqType 9 Discrete tSamFreq[ 0] 8000 tSamFreq[ 1] 11025 tSamFreq[ 2] 12000 tSamFreq[ 3] 16000 tSamFreq[ 4] 22050 tSamFreq[ 5] 24000 tSamFreq[ 6] 32000 tSamFreq[ 7] 44100 tSamFreq[ 8] 48000 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x00c0 1x 192 bytes bInterval 4 bRefresh 0 bSynchAddress 0 AudioControl Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 0 Undefined wLockDelay 0 Undefined Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.01 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 208 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 2 Device Status: 0x0000 (Bus Powered) This ubuntu forum told me to check the automount settings under /apps/nautilus/preferences/media_automount_open in gconf-editor. And I did that. Any clues?

  Read the article

• GPU not powering on

  - by Lerp

  So I got home from work yesterday and went to turn my computer on as per usual to be greeted by this: The screens remained black, so I rebooted; I go as far as GRUB before my screens went black again. I rebooted again, they didn't turn on. I rebooted again, I got as far as the windows login screen. This time I unplugged it, opened it up and cleaned it but to no luck. The GPU was still being tempermental. I repeated the process of turning off and on several times until one time it work as normal. I happily played games for the rest of the night (5-6 hours?) thinking everything was jolly good now. Well I get home from work today and it is doing the SAME thing. Sometimes everything displays normally for a few seconds to minutes then the screens go black; then sometimes the screens don't come on at all. Summary and additional points Screens sometimes turn on before shortly turning off, sometimes they don't; I cannot seem to determine any pattern between when they do or do not turn off. The build has been working fine for about 8 months now so I know it's not hardware incompatibility. If I plug a monitor into the on board graphics I can use the PC normally (just in low graphics mode) I have two monitors and it's a case of they both turn on or not. So I think I can rule out the monitors being dead. I have tried replacing the GPU I have tried replacing the RAM I have tried flashing the CMOS I have tried cleaning the inside The GPU is a Radeon HD 7870 My questions Is my GPU dead? It's not very old and I would rather have a method of being certain it's the GPU before I fork out some money I can't really afford. I do not have a second PC here to test it in. If my GPU is dead why does it sometimes work and sometimes not? Update Okay, it was working again.. at least I thought it was. I left it running for 10-20minutes with the screens black. Turned it off and straight back on and it worked for all of 10minutes. I was then updating the post in joy thinking I could play some games for the rest of the night when BAM it went black again. So yeah, I don't know :C

  Read the article

• Can this USB3 behaviour be anything else than a hardware failure?

  - by Jonas Wielicki

  While my motherboard is half a year old now (ASUS M5A99X EVO), I only recently made use of the USB3 boards (after purchase of USB3 external harddrive). However, I am encountering issues. I am running linux 3.6.7-4.fc16.x86_64. Initially, the harddrive worked fine with USB3 (amazing ˜160MB/s), but I had some problems after putting after putting the harddrive to sleep manually after use (backup) with hdparm -Y. After some time, the device disappears from lsusb and i see the following in dmesg: [ 1924.091107] xhci_hcd 0000:05:00.0: xHCI host not responding to stop endpoint command. [ 1924.091114] xhci_hcd 0000:05:00.0: Assuming host is dying, halting host. [ 1924.091147] xhci_hcd 0000:05:00.0: HC died; cleaning up [ 1924.091233] usb 11-1: USB disconnect, device number 2 [ 1924.091272] sd 6:0:0:0: Device offlined - not ready after error recovery Testing with my (USB3 capable) notebook, I could not immediately reproduce the behaivour. I put the drive to sleep with hdparm -Y and waited for like an hour, but it was still listed in lsusb and responded after a few seconds delay when I tried after the hour of waiting. After an hour, on the desktop, the device would've usually vanished. Googling for this issue, I came across hints that playing around with IOMMU settings and upgrading the BIOS might help. I upgraded the BIOS and tried both with and without IOMMU enabled, got similar results. Most disturbing is, that one of the two USB 3.0 hubs sometimes also disappears from lsusb (or does not show up after boot at all). I've also heard that there are some hardware issues with ASUS USB3 ports. Applying mechanic force to the capble doesn't push the issue to one side or the other. Also, udev seems to reenumerate all devices if I plug the HDD into the USB 3.0 port without success (I can notice from my keyboard layout being changed to the default, which I do not use normally). The drive is externally powered and the external power supply is plugged in (it also stays powered when unplugging from USB, although it will spin down then). So before I try to return the board, I wanted to find out whether this can be anything else than a failure on the motherboard?

  Read the article

• Some Memory Slots Not Working on MSI FM2-A85XA-G65 Motherboard

  - by Mike Ciaraldi

  Short version of question: Does anyone have an MSI FM2-A85XA-G65 motherboard, who can confirm that all four memory slots work? Long version: Several months ago I bought an MSI FM2-A85XA-G65 motherboard at Newegg. At that point I installed an AMD A8-5500 processor and two sticks of Corsair Vengeance 8 GB DDR3-1866 memory, and put it into my file server. I installed the RAM in slots 1 and 3, as directed in the manual, to enable dual-channel memory access. It seemed to work fine, so I bought a second identical mobo (which arrived dead, but was quickly replaced by Newegg) and set of RAM, installed an A10-5800K, and put that into my production Linux machine. Again, it seemed to work well. Eventually I happened to notice that on the server only 8 GB of RAM appeared in the BIOS. I tried each of the slots and memory modules individually and in various combinations. I even swapped processors with the production machine. The result was that putting memory in slots 1 and 2 worked (showing a total of 16 GB), but any memory in slots 3 or 4 was not recognized. However, all four memory slots in the production machine worked, and I confirmed this with both processors. I contacted MSI and arranged to ship the defective mobo back to them for replacement under warranty. I did not want my file server to be down in the interim, and I had another machine I wanted to upgrade, so I bought a third identical mobo to use. That one had the same problem -- only memory slots 1 and 2 worked. I tested it thoroughly with multiple processors and memory sticks. I sent the defective mobo back to MSI and they sent me a new one. This has the same memory slot problem. So I sent it back. The replacement arrived the other day and shows the same problem. I contacted MSI yet again and they said that nobody else has reported memory slot problems on this board and it must be my processor. So my score so far is, out of six boards of this model, I have: One where all four slots work. One which was dead on arrival. Four where only memory slots 1 and 2 work. Before I tear my other machines apart and start swapping processors again I thought I would ask if anyone else has this exact model motherboard and could confirm that all four memory slots either do or do not work. According to MSI you should be able to just plug a single memory module into any of the slots and it will work (and it does on the one mobo I have which works correctly). If you have not yet used all four slots, this is a good time to test them so you know if you can expand your memory in the future. Thanks in advance to anyone who can help.

  Read the article

• Model M Keyboard inputs incorrect characters after logging in to Fedora

  - by mickburkejnr

  I recently bought a 24 year old IBM Model M keyboard. From what I gather, it'd been left on a shelf for the last 5 years, so you can imagine the amount of dust dirt and crap that was on it. Before cleaning it, I plugged it in to my laptop (running Fedora 17) using a PS/2 to USB adapter. What I found was, while it still works, the keys I press don't correspond to what is displayed on the screen. So for example, when I type S on the keyboard, I get ß display on the screen instead. At the time, I put this down to the adapter not working properly. Since then, I stripped the keys off the keyboard and cleaned the whole thing. It looks like it's just come out of a box! I then plugged it in to my computer (also running Fedora 17) via a standard PS/2 plug. The computer loaded up to the login screen, and I typed in my password. Pressed enter, and I logged straight in to my machine. At this point, I opened up a text editor and started typing some stuff. To my horror, the keystrokes I was entering weren't coming up as intended. What came up instead were characters that would map to the pressed key but only under a different keyboard language setting. I opened up a program to see what keyboard language had been selected, and the correct one for the keyboard was selected (which is UK in my case). I opened up a window that would show what characters mapped to what keys, and I pressed every single key on the keyboard, and every corresponding block representing each key lit up. I went back to the text editor to try again, but I was still getting these random characters. Whats more is that the backspace key would not work, although in the other utility it would flash when pressed. What I know is that at the login screen the keyboard must have entered the correct characters, otherwise I wouldn't have been able to log in. Further more, keys that don't respond while using a text editor as sending signals to the computer, as illustrated in that keyboard utility. The question is why random characters are displayed when they really shouldn't be? Would this be a hardware fault or a software issue?

  Read the article

• New harddrives failing within weeks.

  - by Jason Kealey

  I've experienced 8 hard disk failures in 3 months and have tried many things to solve the issue permanently but I have failed. I would like to know if you have any advice for me. System was running Win XP on an Asus P5W-DH Deluxe. I have setup a RAID-1 array. I started out with 2 x 500 GB 7200RPM Western Digital drives. One died. I took it out to RMA it. On the same day, the router was fried. Assumed a power surge occurred; connected an older UPS to protect the system. Once I got my hands on an identical disk, I installed it. The RAID array was rebuilt. A few days later, the other one died. Assumed the rebuild caused it to fail. Took it out for RMA. Before the other one arrived, the remaining one died. I then discovered I could re-enable them using the Intel Matrix Storage Manager. I re-enabled both and the system seemed fine for a week, until both died again. I got two new 1.5 TB 7200RPM Seagate drives and re-installed Windows 7. Also replaced the UPS and power supply. They both died again. The voltage on the plug is stable between 120 and 122V as per the UPS. None of the other devices have had any problems (monitors, etc.). At this point, I see two options: a) electrical issue in the house that was, for some reason, not blocked by the UPS. b) something else inside the system causing surges? motherboard? onboard raid controller? Failures happen fairly quickly, between 2 and 14 days after I fix the previous issue. I just gotten a new computer (Core i7) to replace it. If it is stable, I can determine that b) was the problem. If it fries its hard drive again, I can determine that it is an electrical issue in the house. Do you have any other thoughts? Any tools I can run on the drives that failed to get more information about the original SMART event history?

  Read the article

• What is the probable failure - no BSOD, no event log, monitors sleeping, force reboot required

  - by Tyler

  Every 3 to 15 days, my PC freezes. This typically happens when the computer is idle, I'm coming home from work, back from vacation, etc. It's never happened while using my computer. The monitors are in power save mode The Caps Lock light on the (wireless) keyboard doesn't work Ctrl-alt-del has no effect, mouse (wireless) has no effect The hardware reset button and single press of power putton have no effect Computer does not appear on the network No BSOD, no memory dump Event logs have no errors or indications of problems near the time of crash. Only messages after reboot indicating that there was a reboot without a clean shutdown. Windows is set to never put the computer to sleep (just the display) Here are the vital stats of the build: OS Windows 8 Pro 64-bit CPU Intel i5-2400 Mobo Intel BOXDP67DE Micro ATX GPU MSI N460GTX Cyclone768D5/OC RAM CORSAIR XMS3 8GB (2 x 4GB) CMX8GX3M2A1333C9 PSU SeaSonic X Series X650 Gold System Drive Samsung 840 Pro 256 GB SSD Data Drive 2 x Western Digital WD20EARS 2TB in hardware RAID 1 Optical Lite-On DVD burner IHAS424-98 And here is the story of how the problem developed and what I've done to diagnose: January 2011, system built with Windows 7 64-bit, runs great. March 2011, Intel replaced the mobo because of the bad sata controllers. October 2012, upgrade to Windows 8 (problems start shortly after). January 2013, system freezes and causes network to fail for the whole house. Unplug the network cable and other devices and PCs can use the internet. Plug it back in, internet goes away for everyone. Reboot and everything is fine. March 2013, install Intel Gigabit CT PCI-E NIC, disable mobo nic in bios. Network strangeness goes away. Freezes are less frequent. Memtest shows no problems (20 passes). Early June 2013, replace Antec PSU with SeaSonic PSU. Mid June 2013, replace OCZ Vertex 2 SSD with Samsung SSD. Late June 2013, get frustrated and hope the community has some good ideas (I'm running out of budget to replace parts). My next plan of attack is setting "Turn off display" to Never and using a screen saver to see how that reacts on the next freeze. It makes me sad to waste power for up to 15 days though. Has anyone out there seen a problem like this? Any ideas on what kind of malfunction would act this way? Ideas of other diagnostic steps to take?

  Read the article

< Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >