Search Results

Search found 10242 results on 410 pages for 'stored proc'.

Page 126/410 | < Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >

• Swapping RAID sets in and out of the same controller

  - by hazymat

  This is a really simple question, and the answer is probably encoded in various wikipedia articles, however my question is reasonably specific, and I need a bulletproof answer! I'm not sure if my question pertains to hardware RAID in general, or to the specific RAID controller I'm working on. Either way it is the Dell SAS 6/iR (this is an LSI sas1068e chipset). I simply want to: remove a set of striped (RAID 0) disks from this RAID controller in a server put in another set of disks, and create a RAID 1 array (or create a new 'virtual disk', as they call it in the SAS 6/iR manual) Do stuff with the new RAID 1 array Have the option of putting back the old set of disks (the RAID 0 striped ones) I am quite sure this is possible, but I need some form of reliable, evidence-based answer as it's for a client of mine, and I need to migrate their data safely. The question: can I actually do the above? Does the RAID configuration get stored on the disks themselves, or in the hardware controller? Is any data stored in the hardware controller? If there is any chance I cannot completely restore operation of the first set of disks I removed, then I need to know about it! The manual alludes to the answer to this question (see page 45 of this document), and talks about activating an array of disks. I just need someone to confirm I can definitely do the above. See, simple question, right? :)

  Read the article

• SINGLE SIGN ON SECURITY THREAT! FACEBOOK access_token broadcast in the open/clear

  - by MOKANA

  Subsequent to my posting there was a remark made that this was not really a question but I thought I did indeed postulate one. So that there is no ambiquity here is the question with a lead in: Since there is no data sent from Facebook during the Canvas Load process that is not at some point divulged, including the access_token, session and other data that could uniquely identify a user, does any one see any other way other than adding one more layer, i.e., a password, sent over the wire via HTTPS along with the access_toekn, that will insure unique untampered with security by the user? Using Wireshark I captured the local broadcast while loading my Canvas Application page. I was hugely surprised to see the access_token broadcast in the open, viewable for any one to see. This access_token is appended to any https call to the Facebook OpenGraph API. Using facebook as a single click log on has now raised huge concerns for me. It is stored in a session object in memory and the cookie is cleared upon app termination and after reviewing the FB.Init calls I saw a lot of HTTPS calls so I assumed the access_token was always encrypted. But last night I saw in the status bar a call from what was simply an http call that included the App ID so I felt I should sniff the Application Canvas load sequence. Today I did sniff the broadcast and in the attached image you can see that there are http calls with the access_token being broadcast in the open and clear for anyone to gain access to. Am I missing something, is what I am seeing and my interpretation really correct. If any one can sniff and get the access_token they can theorically make calls to the Graph API via https, even though the call back would still need to be the site established in Facebook's application set up. But what is truly a security threat is anyone using the access_token for access to their own site. I do not see the value of a single sign on via Facebook if the only thing that was established as secure was the access_token - becuase for what I can see it clearly is not secure. Access tokens that never have an expire date do not change. Access_tokens are different for every user, to access to another site could be held tight to just a single user, but compromising even a single user's data is unacceptable. http://www.creatingstory.com/images/InTheOpen.png Went back and did more research on this: FINDINGS: Went back an re ran the canvas application to verify that it was not any of my code that was not broadcasting. In this call: HTTP GET /connect.php/en_US/js/CacheData HTTP/1.1 The USER ID is clearly visible in the cookie. So USER_ID's are fully visible, but they are already. Anyone can go to pretty much any ones page and hover over the image and see the USER ID. So no big threat. APP_ID are also easily obtainable - but . . . http://www.creatingstory.com/images/InTheOpen2.png The above file clearly shows the FULL ACCESS TOKEN clearly in the OPEN via a Facebook initiated call. Am I wrong. TELL ME I AM WRONG because I want to be wrong about this. I have since reset my app secret so I am showing the real sniff of the Canvas Page being loaded. Additional data 02/20/2011: @ifaour - I appreciate the time you took to compile your response. I am pretty familiar with the OAuth process and have a pretty solid understanding of the signed_request unpacking and utilization of the access_token. I perform a substantial amount of my processing on the server and my Facebook server side flows are all complete and function without any flaw that I know of. The application secret is secure and never passed to the front end application and is also changed regularly. I am being as fanatical about security as I can be, knowing there is so much I don’t know that could come back and bite me. Two huge access_token issues: The issues concern the possible utilization of the access_token from the USER AGENT (browser). During the FB.INIT() process of the Facebook JavaScript SDK, a cookie is created as well as an object in memory called a session object. This object, along with the cookie contain the access_token, session, a secret, and uid and status of the connection. The session object is structured such that is supports both the new OAuth and the legacy flows. With OAuth, the access_token and status are pretty much al that is used in the session object. The first issue is that the access_token is used to make HTTPS calls to the GRAPH API. If you had the access_token, you could do this from any browser: https://graph.facebook.com/220439?access_token=... and it will return a ton of information about the user. So any one with the access token can gain access to a Facebook account. You can also make additional calls to any info the user has granted access to the application tied to the access_token. At first I thought that a call into the GRAPH had to have a Callback to the URL established in the App Setup, but I tested it as mentioned below and it will return info back right into the browser. Adding that callback feature would be a good idea I think, tightens things up a bit. The second issue is utilization of some unique private secured data that identifies the user to the third party data base, i.e., like in my case, I would use a single sign on to populate user information into my database using this unique secured data item (i.e., access_token which contains the APP ID, the USER ID, and a hashed with secret sequence). None of this is a problem on the server side. You get a signed_request, you unpack it with secret, make HTTPS calls, get HTTPS responses back. When a user has information entered via the USER AGENT(browser) that must be stored via a POST, this unique secured data element would be sent via HTTPS such that they are validated prior to data base insertion. However, If there is NO secured piece of unique data that is supplied via the single sign on process, then there is no way to guarantee unauthorized access. The access_token is the one piece of data that is utilized by Facebook to make the HTTPS calls into the GRAPH API. it is considered unique in regards to BOTH the USER and the APPLICATION and is initially secure via the signed_request packaging. If however, it is subsequently transmitted in the clear and if I can sniff the wire and obtain the access_token, then I can pretend to be the application and gain the information they have authorized the application to see. I tried the above example from a Safari and IE browser and it returned all of my information to me in the browser. In conclusion, the access_token is part of the signed_request and that is how the application initially obtains it. After OAuth authentication and authorization, i.e., the USER has logged into Facebook and then runs your app, the access_token is stored as mentioned above and I have sniffed it such that I see it stored in a Cookie that is transmitted over the wire, resulting in there being NO UNIQUE SECURED IDENTIFIABLE piece of information that can be used to support interaction with the database, or in other words, unless there were one more piece of secure data sent along with the access_token to my database, i.e., a password, I would not be able to discern if it is a legitimate call. Luckily I utilized secure AJAX via POST and the call has to come from the same domain, but I am sure there is a way to hijack that. I am totally open to any ideas on this topic on how to uniquely identify my USERS other than adding another layer (password) via this single sign on process or if someone would just share with me that I read and analyzed my data incorrectly and that the access_token is always secure over the wire. Mahalo nui loa in advance.

  Read the article

• Redhat Software RAID 1 not syncing

  - by hamstar

  Hey guys, I setup a software RAID 1 on a Redhat server, everything went sweet and it synced the first time. The other day the raid failedover for some reason and the disks hadn't been syncing since that first time, so it went back to 2 weeks ago when we did the first sync. We got the system back up running off the master only. However what would cause the software raid to not sync? I used mdadm to setup the RAID. Any ideas? EDIT: Sorry I don't have the output from /proc/mdstat before the raid failedover, it is now running on only the master... I can put the slave back in no problems but I was wondering how to make it sync all the time instead of only when I add it.

  Read the article

• External USB drive is failing

  - by dma_k

  I have an external USB 2.0 drive WD My Book Mirror Edition, running in RAID 1 (mirroring) mode. A while ago the hard drive started to fail: it stops responding (directories are not listed returning an error after a big timeout). Sometimes it works for weeks before a failure, sometimes – few hours. Small write operations (like removing few files or editing a small file) do not harm, but when copying large files to the drive over the network, or creating the archive locally, the kernel dumps. Also interesting to note that once kernel has failed, Linux does not want to reboot normally (reboot hangs); when Linux box is shutdown with power button, WD drive does not go to sleep mode (as it usually does): leds continue to run, pressing and holding the "shutdown" button on drive's back panel does not do anything; only unplugging the power cord helps. Here goes the boot log: Aug 16 00:32:21 kernel: [ 1.514106] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Aug 16 00:32:21 kernel: [ 1.657738] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Aug 16 00:32:21 kernel: [ 1.673747] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 1.673751] ehci_hcd 0000:00:1d.7: EHCI Host Controller Aug 16 00:32:21 kernel: [ 1.725224] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Aug 16 00:32:21 kernel: [ 1.741647] ehci_hcd 0000:00:1d.7: using broken periodic workaround Aug 16 00:32:21 kernel: [ 1.761790] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported Aug 16 00:32:21 kernel: [ 1.761873] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000 Aug 16 00:32:21 kernel: [ 1.796043] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Aug 16 00:32:21 kernel: [ 1.879069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Aug 16 00:32:21 kernel: [ 1.895446] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 1.911796] usb usb1: Product: EHCI Host Controller Aug 16 00:32:21 kernel: [ 1.928015] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd Aug 16 00:32:21 kernel: [ 1.944331] usb usb1: SerialNumber: 0000:00:1d.7 Aug 16 00:32:21 kernel: [ 1.961285] usb usb1: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 1.994412] hub 1-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 2.010864] hub 1-0:1.0: 8 ports detected Aug 16 00:32:21 kernel: [ 2.085939] uhci_hcd: USB Universal Host Controller Interface driver Aug 16 00:32:21 kernel: [ 2.191945] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Aug 16 00:32:21 kernel: [ 2.226029] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 2.226034] uhci_hcd 0000:00:1d.0: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.243237] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Aug 16 00:32:21 kernel: [ 2.260390] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00 Aug 16 00:32:21 kernel: [ 2.277517] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 2.294815] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 2.312173] usb usb2: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.329534] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 2.346828] usb usb2: SerialNumber: 0000:00:1d.0 Aug 16 00:32:21 kernel: [ 2.412989] usb usb2: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 2.430651] usb 1-2: new high speed USB device using ehci_hcd and address 2 Aug 16 00:32:21 kernel: [ 2.449046] hub 2-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 2.466514] hub 2-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 2.484639] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Aug 16 00:32:21 kernel: [ 2.537750] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 2.537756] uhci_hcd 0000:00:1d.1: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.555085] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Aug 16 00:32:21 kernel: [ 2.572231] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00 Aug 16 00:32:21 kernel: [ 2.589593] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 2.606869] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 2.624134] usb usb3: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.641329] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 2.658505] usb usb3: SerialNumber: 0000:00:1d.1 Aug 16 00:32:21 kernel: [ 2.675843] usb usb3: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 2.692864] hub 3-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 2.709651] hub 3-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 2.727378] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Aug 16 00:32:21 kernel: [ 2.768252] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 2.768258] uhci_hcd 0000:00:1d.2: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.806679] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Aug 16 00:32:21 kernel: [ 2.824117] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00 Aug 16 00:32:21 kernel: [ 2.841405] usb 1-2: New USB device found, idVendor=1058, idProduct=1104 Aug 16 00:32:21 kernel: [ 2.858448] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 16 00:32:21 kernel: [ 2.875347] usb 1-2: Product: My Book Aug 16 00:32:21 kernel: [ 2.892113] usb 1-2: Manufacturer: Western Digital Aug 16 00:32:21 kernel: [ 2.908915] usb 1-2: SerialNumber: 575532553130303530353538 Aug 16 00:32:21 kernel: [ 2.943242] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 2.960405] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 2.977615] usb usb4: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.994687] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 3.011711] usb usb4: SerialNumber: 0000:00:1d.2 Aug 16 00:32:21 kernel: [ 3.029589] usb usb4: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 3.082027] sd 2:0:0:0: [sda] Attached SCSI disk Aug 16 00:32:21 kernel: [ 3.103953] usb 1-2: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 3.122625] hub 4-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 3.140484] hub 4-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 3.161680] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 Aug 16 00:32:21 kernel: [ 3.181257] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 3.181263] uhci_hcd 0000:00:1d.3: UHCI Host Controller Aug 16 00:32:21 kernel: [ 3.198614] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Aug 16 00:32:21 kernel: [ 3.216012] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00 Aug 16 00:32:21 kernel: [ 3.249877] Uniform CD-ROM driver Revision: 3.20 Aug 16 00:32:21 kernel: [ 3.267765] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 3.284947] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 3.302023] usb usb5: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 3.319215] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 3.336298] usb usb5: SerialNumber: 0000:00:1d.3 Aug 16 00:32:21 kernel: [ 3.368377] Initializing USB Mass Storage driver... Aug 16 00:32:21 kernel: [ 3.390652] usbcore: registered new interface driver hiddev Aug 16 00:32:21 kernel: [ 3.408109] scsi4 : SCSI emulation for USB Mass Storage devices Aug 16 00:32:21 kernel: [ 3.425281] sr 0:0:1:0: Attached scsi CD-ROM sr0 Aug 16 00:32:21 kernel: [ 3.438978] sr 0:0:1:0: Attached scsi generic sg0 type 5 Aug 16 00:32:21 kernel: [ 3.456328] usbcore: registered new interface driver usb-storage Aug 16 00:32:21 kernel: [ 3.474564] usb-storage: device found at 2 Aug 16 00:32:21 kernel: [ 3.474567] usb-storage: waiting for device to settle before scanning Aug 16 00:32:21 kernel: [ 3.475320] sd 2:0:0:0: Attached scsi generic sg1 type 0 Aug 16 00:32:21 kernel: [ 3.492587] USB Mass Storage support registered. Aug 16 00:32:21 kernel: [ 3.510930] usb usb5: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 3.531076] hub 5-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 3.548399] hub 5-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 3.591743] input: Western Digital My Book as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.1/input/input2 Aug 16 00:32:21 kernel: [ 3.609515] generic-usb 0003:1058:1104.0001: input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:1d.7-2/input1 Aug 16 00:32:21 kernel: [ 3.627466] usbcore: registered new interface driver usbhid Aug 16 00:32:21 kernel: [ 8.581664] usb-storage: device scan complete Aug 16 00:32:21 kernel: [ 8.624270] scsi 4:0:0:0: Direct-Access WD My Book 1008 PQ: 0 ANSI: 4 Aug 16 00:32:21 kernel: [ 8.655135] scsi 4:0:0:1: Enclosure WD My Book Device 1008 PQ: 0 ANSI: 4 Aug 16 00:32:21 kernel: [ 8.675393] sd 4:0:0:0: Attached scsi generic sg2 type 0 Aug 16 00:32:21 kernel: [ 8.698669] scsi 4:0:0:1: Attached scsi generic sg3 type 13 Aug 16 00:32:21 kernel: [ 8.723370] sd 4:0:0:0: [sdb] 1953513472 512-byte logical blocks: (1.00 TB/931 GiB) Aug 16 00:32:21 kernel: [ 8.750477] sd 4:0:0:0: [sdb] Write Protect is off Aug 16 00:32:21 kernel: [ 8.769411] sd 4:0:0:0: [sdb] Mode Sense: 10 00 00 00 Aug 16 00:32:21 kernel: [ 8.769414] sd 4:0:0:0: [sdb] Assuming drive cache: write through Aug 16 00:32:21 kernel: [ 8.822971] sd 4:0:0:0: [sdb] Assuming drive cache: write through Aug 16 00:32:21 kernel: [ 8.841978] sdb: sdb1 Aug 16 00:32:21 kernel: [ 8.905580] sd 4:0:0:0: [sdb] Assuming drive cache: write through Aug 16 00:32:21 kernel: [ 8.924173] sd 4:0:0:0: [sdb] Attached SCSI disk Aug 16 00:32:21 kernel: [ 11.600492] XFS mounting filesystem sdb1 Aug 16 00:32:21 kernel: [ 12.222948] Ending clean XFS mount for filesystem: sdb1 After a while the following appears in a log: Aug 16 09:30:56 kernel: [32359.112029] usb 1-2: reset high speed USB device using ehci_hcd and address 2 Aug 16 09:31:59 kernel: [32422.112035] usb 1-2: reset high speed USB device using ehci_hcd and address 2 Aug 16 09:33:00 kernel: [32483.112029] usb 1-2: reset high speed USB device using ehci_hcd and address 2 And then it is followed by few kernel dumps, which I think, are not good: Aug 16 09:33:40 kernel: [32520.428027] INFO: task xfssyncd:1002 blocked for more than 120 seconds. Aug 16 09:33:40 kernel: [32520.462689] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 16 09:33:40 kernel: [32520.497422] xfssyncd D c3d84a60 0 1002 2 0x00000000 Aug 16 09:33:40 kernel: [32520.532117] f6c9aa80 00000046 c1132742 c3d84a60 00000286 c1418100 c1418100 00000000 Aug 16 09:33:40 kernel: [32520.566867] f6c9ac3c c2808100 00000000 f653b18b 00001d76 00000001 f6c9aa80 c3c3f0e0 Aug 16 09:33:40 kernel: [32520.601343] 08e59242 f6c9ac3c 2e41392b 00000000 08e59242 00000000 c3f7fb48 0067385a Aug 16 09:33:40 kernel: [32520.635533] Call Trace: Aug 16 09:33:40 kernel: [32520.668991] [<c1132742>] ? cfq_set_request+0x0/0x290 Aug 16 09:33:40 kernel: [32520.702804] [<c126b532>] ? io_schedule+0x5f/0x98 Aug 16 09:33:40 kernel: [32520.736555] [<c1128be0>] ? get_request_wait+0xcb/0x146 Aug 16 09:33:40 kernel: [32520.770360] [<c10437ba>] ? autoremove_wake_function+0x0/0x2d Aug 16 09:33:40 kernel: [32520.804110] [<c112907c>] ? __make_request+0x2cc/0x3d9 Aug 16 09:33:40 kernel: [32520.837713] [<c1128230>] ? blk_peek_request+0x135/0x143 Aug 16 09:33:40 kernel: [32520.871265] [<f8582987>] ? scsi_dispatch_cmd+0x185/0x1e5 [scsi_mod] Aug 16 09:33:40 kernel: [32520.904407] [<c1127cf1>] ? generic_make_request+0x266/0x2b4 Aug 16 09:33:40 kernel: [32520.937007] [<c10cf821>] ? bvec_alloc_bs+0x95/0xaf Aug 16 09:33:40 kernel: [32520.969033] [<c1127dfb>] ? submit_bio+0xbc/0xd6 Aug 16 09:33:40 kernel: [32521.000485] [<c10cffd1>] ? bio_add_page+0x28/0x2e Aug 16 09:33:40 kernel: [32521.031403] [<f8918d38>] ? _xfs_buf_ioapply+0x206/0x22b [xfs] Aug 16 09:33:40 kernel: [32521.061888] [<f89197bd>] ? xfs_buf_iorequest+0x38/0x60 [xfs] Aug 16 09:33:40 kernel: [32521.091845] [<f8907230>] ? xlog_bdstrat_cb+0x16/0x3d [xfs] Aug 16 09:33:40 kernel: [32521.121222] [<f8905781>] ? XFS_bwrite+0x32/0x64 [xfs] Aug 16 09:33:40 kernel: [32521.150007] [<f89059be>] ? xlog_sync+0x20b/0x311 [xfs] Aug 16 09:33:40 kernel: [32521.178214] [<f89112fc>] ? xfs_trans_ail_tail+0x12/0x27 [xfs] Aug 16 09:33:40 kernel: [32521.205914] [<f8906261>] ? xlog_state_sync_all+0xa2/0x141 [xfs] Aug 16 09:33:40 kernel: [32521.233074] [<f8906611>] ? _xfs_log_force+0x51/0x68 [xfs] Aug 16 09:33:40 kernel: [32521.259664] [<c103abaf>] ? process_timeout+0x0/0x5 Aug 16 09:33:40 kernel: [32521.285662] [<f8906636>] ? xfs_log_force+0xe/0x27 [xfs] Aug 16 09:33:40 kernel: [32521.311171] [<f89202df>] ? xfs_sync_worker+0x17/0x5c [xfs] Aug 16 09:33:40 kernel: [32521.336117] [<f891fbb7>] ? xfssyncd+0x134/0x17d [xfs] Aug 16 09:33:40 kernel: [32521.360498] [<f891fa83>] ? xfssyncd+0x0/0x17d [xfs] Aug 16 09:33:40 kernel: [32521.384211] [<c1043588>] ? kthread+0x61/0x66 Aug 16 09:33:40 kernel: [32521.407890] [<c1043527>] ? kthread+0x0/0x66 Aug 16 09:33:40 kernel: [32521.430876] [<c1003d47>] ? kernel_thread_helper+0x7/0x10 Aug 16 09:33:40 kernel: [32521.453394] INFO: task flush-8:16:12945 blocked for more than 120 seconds. Aug 16 09:33:40 kernel: [32521.476116] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 16 09:33:40 kernel: [32521.498579] flush-8:16 D 00000000 0 12945 2 0x00000000 Aug 16 09:33:40 kernel: [32521.520649] f4e4d540 00000046 e412e940 00000000 00000002 c1418100 c1418100 c14136ac Aug 16 09:33:40 kernel: [32521.542426] f4e4d6fc c2808100 00000000 00000000 000008b4 00000001 f4e4d540 c3c3f0e0 Aug 16 09:33:40 kernel: [32521.563745] 02e905a8 f4e4d6fc 007a5399 00000000 02e905a8 00000000 f4e2db48 00670b98 Aug 16 09:33:40 kernel: [32521.585077] Call Trace: Aug 16 09:33:40 kernel: [32521.605790] [<c126b532>] ? io_schedule+0x5f/0x98 Aug 16 09:33:40 kernel: [32521.626184] [<c1128be0>] ? get_request_wait+0xcb/0x146 Aug 16 09:33:40 kernel: [32521.646133] [<c10437ba>] ? autoremove_wake_function+0x0/0x2d Aug 16 09:33:40 kernel: [32521.665659] [<c112907c>] ? __make_request+0x2cc/0x3d9 Aug 16 09:33:40 kernel: [32521.684716] [<f891796e>] ? xfs_convert_page+0x30a/0x331 [xfs] Aug 16 09:33:40 kernel: [32521.703366] [<c1127cf1>] ? generic_make_request+0x266/0x2b4 Aug 16 09:33:40 kernel: [32521.721644] [<c10cf821>] ? bvec_alloc_bs+0x95/0xaf Aug 16 09:33:40 kernel: [32521.739465] [<c1127dfb>] ? submit_bio+0xbc/0xd6 Aug 16 09:33:40 kernel: [32521.756896] [<c10cfa45>] ? bio_alloc_bioset+0x7b/0xba Aug 16 09:33:40 kernel: [32521.774046] [<f8917af0>] ? xfs_submit_ioend_bio+0x3b/0x44 [xfs] Aug 16 09:33:40 kernel: [32521.790694] [<f8917ba3>] ? xfs_submit_ioend+0xaa/0xc4 [xfs] Aug 16 09:33:40 kernel: [32521.806736] [<f891817d>] ? xfs_page_state_convert+0x5c0/0x61c [xfs] Aug 16 09:33:40 kernel: [32521.822859] [<c113705b>] ? __lookup_tag+0x8e/0xee Aug 16 09:33:40 kernel: [32521.838958] [<f891840d>] ? xfs_vm_writepage+0x91/0xc4 [xfs] Aug 16 09:33:40 kernel: [32521.855039] [<c108bbcc>] ? __writepage+0x8/0x22 Aug 16 09:33:40 kernel: [32521.871067] [<c108c17b>] ? write_cache_pages+0x1af/0x29f Aug 16 09:33:40 kernel: [32521.886616] [<c108bbc4>] ? __writepage+0x0/0x22 Aug 16 09:33:40 kernel: [32521.901593] [<c108c285>] ? generic_writepages+0x1a/0x21 Aug 16 09:33:40 kernel: [32521.916455] [<f8918338>] ? xfs_vm_writepages+0x0/0x38 [xfs] Aug 16 09:33:40 kernel: [32521.931484] [<c108c2a5>] ? do_writepages+0x19/0x25 Aug 16 09:33:40 kernel: [32521.946648] [<c10c80d9>] ? writeback_single_inode+0xc7/0x273 Aug 16 09:33:40 kernel: [32521.961675] [<c10c8c44>] ? writeback_inodes_wb+0x3dd/0x49c Aug 16 09:33:40 kernel: [32521.976831] [<c10c8e18>] ? wb_writeback+0x115/0x178 Aug 16 09:33:40 kernel: [32521.991778] [<c10c901f>] ? wb_do_writeback+0x121/0x131 Aug 16 09:33:40 kernel: [32522.006538] [<c103abaf>] ? process_timeout+0x0/0x5 Aug 16 09:33:40 kernel: [32522.021091] [<c10c9050>] ? bdi_writeback_task+0x21/0x89 Aug 16 09:33:40 kernel: [32522.035493] [<c10979e5>] ? bdi_start_fn+0x59/0xa4 Aug 16 09:33:40 kernel: [32522.049765] [<c109798c>] ? bdi_start_fn+0x0/0xa4 Aug 16 09:33:40 kernel: [32522.063792] [<c1043588>] ? kthread+0x61/0x66 Aug 16 09:33:40 kernel: [32522.077612] [<c1043527>] ? kthread+0x0/0x66 Aug 16 09:33:40 kernel: [32522.091260] [<c1003d47>] ? kernel_thread_helper+0x7/0x10 Aug 16 09:33:40 kernel: [32522.104966] INFO: task smartctl:13098 blocked for more than 120 seconds. Aug 16 09:33:40 kernel: [32522.118883] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 16 09:33:40 kernel: [32522.133012] smartctl D 00000020 0 13098 13097 0x00000000 Aug 16 09:33:40 kernel: [32522.147221] e50b9540 00000086 c11d28a8 00000020 00000770 c1418100 c1418100 c14136ac Aug 16 09:33:40 kernel: [32522.161720] e50b96fc c2808100 00000000 e53e8800 00000000 00000020 c3cec000 c13886c0 Aug 16 09:33:40 kernel: [32522.176217] f99dab68 e50b96fc 007a4f1e 00000001 c4082f24 c4082ed8 00000001 c3c3f0e0 Aug 16 09:33:40 kernel: [32522.190737] Call Trace: Aug 16 09:33:40 kernel: [32522.205038] [<c11d28a8>] ? __netdev_alloc_skb+0x14/0x2d Aug 16 09:33:40 kernel: [32522.219605] [<c126b799>] ? schedule_timeout+0x20/0xb0 Aug 16 09:33:40 kernel: [32522.234144] [<c112820d>] ? blk_peek_request+0x112/0x143 Aug 16 09:33:40 kernel: [32522.248649] [<f85873b6>] ? scsi_request_fn+0x3c1/0x47a [scsi_mod] Aug 16 09:33:40 kernel: [32522.263233] [<c103aba8>] ? del_timer+0x55/0x5c Aug 16 09:33:40 kernel: [32522.277773] [<c126b6a2>] ? wait_for_common+0xa4/0x100 Aug 16 09:33:40 kernel: [32522.292342] [<c102cd8d>] ? default_wake_function+0x0/0x8 Aug 16 09:33:40 kernel: [32522.306958] [<c112b3d1>] ? blk_execute_rq+0x8b/0xb2 Aug 16 09:33:40 kernel: [32522.321569] [<c112b2ac>] ? blk_end_sync_rq+0x0/0x23 Aug 16 09:33:40 kernel: [32522.336070] [<c112b58b>] ? blk_recount_segments+0x13/0x20 Aug 16 09:33:40 kernel: [32522.350583] [<c1127307>] ? blk_rq_bio_prep+0x44/0x74 Aug 16 09:33:40 kernel: [32522.365059] [<c112b0b2>] ? blk_rq_map_kern+0xc5/0xee Aug 16 09:33:40 kernel: [32522.379439] [<c112e2a5>] ? sg_scsi_ioctl+0x221/0x2aa Aug 16 09:33:40 kernel: [32522.393801] [<c112e672>] ? scsi_cmd_ioctl+0x344/0x39a Aug 16 09:33:40 kernel: [32522.408140] [<c1024c87>] ? update_curr+0x106/0x1b3 Aug 16 09:33:40 kernel: [32522.422566] [<c1024c87>] ? update_curr+0x106/0x1b3 Aug 16 09:33:40 kernel: [32522.436832] [<f87676aa>] ? sd_ioctl+0x90/0xb5 [sd_mod] Aug 16 09:33:40 kernel: [32522.451228] [<c112c35f>] ? __blkdev_driver_ioctl+0x53/0x63 Aug 16 09:33:40 kernel: [32522.465689] [<c112cbbf>] ? blkdev_ioctl+0x850/0x891 Aug 16 09:33:40 kernel: [32522.479982] [<c1020474>] ? __wake_up_common+0x34/0x59 Aug 16 09:33:40 kernel: [32522.494138] [<c10244cd>] ? complete+0x28/0x36 Aug 16 09:33:40 kernel: [32522.507986] [<c1086c64>] ? find_get_page+0x1f/0x81 Aug 16 09:33:40 kernel: [32522.521671] [<c10abed5>] ? add_partial+0xe/0x40 Aug 16 09:33:40 kernel: [32522.535285] [<c1086e68>] ? lock_page+0x8/0x1d Aug 16 09:33:40 kernel: [32522.548797] [<c1087432>] ? filemap_fault+0xb5/0x2e6 Aug 16 09:33:40 kernel: [32522.562141] [<c109941c>] ? __do_fault+0x381/0x3b1 Aug 16 09:33:40 kernel: [32522.575441] [<c10d0c30>] ? block_ioctl+0x27/0x2c Aug 16 09:33:40 kernel: [32522.588708] [<c10d0c09>] ? block_ioctl+0x0/0x2c Aug 16 09:33:40 kernel: [32522.601858] [<c10bcd78>] ? vfs_ioctl+0x1c/0x5f Aug 16 09:33:40 kernel: [32522.614917] [<c10bd30c>] ? do_vfs_ioctl+0x4aa/0x4e5 Aug 16 09:33:40 kernel: [32522.627961] [<c10350db>] ? __do_softirq+0x115/0x151 Aug 16 09:33:40 kernel: [32522.640901] [<c126e270>] ? do_page_fault+0x2f1/0x307 Aug 16 09:33:40 kernel: [32522.653803] [<c10bd388>] ? sys_ioctl+0x41/0x58 Aug 16 09:33:40 kernel: [32522.666674] [<c10030fb>] ? sysenter_do_call+0x12/0x28 Then again few messages reset high speed USB device using ehci_hcd and address 2. I have browsed and read similar error reports here and there and I tried: I have upgraded the kernel from v2.6.26-2 to 2.6.32-5, which has not solved the problem. They say, this might a cable problem. I have tried to replace the USB-to-miniUSB cable (that connects external drive with computer) with another one. No changes. Somebody suggests to try another USB port. I have only 4 external USB ports, tried another one with no success. They say to try uhci_hcd. I have unmounted the device, unloaded ehci_hcd and mounted again. The difference was that now in log I get reset full speed USB device using uhci_hcd and address 2 and similar kernel dumps after a while. They say to echo 128 > /sys/block/sdb/device/max_sectors. I tried it with ehci_hcd with no success (note: I have issued this command after the drive was mounted but before using it actively). I have lauched smartmond and checking periodically the output of smartctl: drive temperature is OK, number of bad sectors and uncorrectable errors is 0. Nothing suspicious is reported by S.M.A.R.T. except maybe the following: Aug 16 12:40:12 kernel: [43715.314566] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO Aug 16 12:40:13 kernel: [43715.705622] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO Of course, I have not tried all combinations of above. But unfortunately, I am run out of cardinal ideas. If anybody can advice something specific about the problem, you are very welcome.

  Read the article

• Ubuntu hibernate resume fails: "PM: Resume from disk failed"

  - by Neil

  I just upgraded to Ubuntu 10.4 from 9.10, and it's now hiding the hibernate and suspend options. How do I get them back? So the way you do this is make sure that your swap partition is in /etc/fstab and swap is enabled, and big enough. Look at /proc/swaps to see if anything is listed. Now I'm getting this error when I boot after suspending: init: ureadahead-other main process (705) terminated with status 4 Does anyone know how to fix this? I'm using Ubuntu with kernel 2.6.32-22-generic.

  Read the article

• Hardware error messages from syslogd

  - by Farhat

  I have a 64-core AMD server running CEntOS on which I was running a long job. In the midst of the output, I see these lines. It appears to be a memory error. How severe is this and what exactly does it indicate? Message from syslogd@heracles at Nov 7 21:00:02 ... kernel:[Hardware Error]: MC4_STATUS[Over|CE|MiscV|-|AddrV|-|-|CECC]: 0xdc10410040080a13 Message from syslogd@heracles at Nov 7 21:00:02 ... kernel:[Hardware Error]: Northbridge Error (node 4): DRAM ECC error detected on the NB. Message from syslogd@heracles at Nov 7 21:00:02 ... kernel:[Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout)

  Read the article

• Problem starting Glassfish on a VPS

  - by Raydon

  I am attempting to install Glassfishv3 on my Ubuntu (8.04) VPS using Java 1.6. I initially tried starting the server using: asadmin start-domain and received the following error message: JVM failed to start: com.sun.enterprise.admin.launcher.GFLauncherException: The server exited prematurely with exit code 1. Before it died, it produced the following output: Error occurred during initialization of VM Could not reserve enough space for object heap Command start-domain failed. I attempted to run it again and received a different message: Waiting for DAS to start Error starting domain: domain1. The server exited prematurely with exit code 1. Before it died, it produced the following output: Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. Command start-domain failed. If I run cat /proc/meminfo I get the following (all other values are 0kB): MemTotal: 1310720 kB MemFree: 1150668 kB LowTotal: 1310720 kB LowFree: 1150668 kB I have checked the contents of glassfish/glassfish/domains/domain1/config/domain.xml and the JVM setting is: -Xmx512m Any help on resolving this problem would be appreciated.

  Read the article

• Linux software raid fails to include one device for one RAID1 array

  - by user1389890

  One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64. Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the mdadm.conf file: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions? Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1

  Read the article

• Upon reboot, Linux software raid fails to include one device of a RAID1 array

  - by user1389890

  One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64 (Debian Squeeze). Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the result of $ cat /etc/mdadm/mdadm.conf: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions?

  Read the article

• Running out of LowMem with Ubuntu PAE Kernel and 32GB of RAM

  - by magneticMonster

  I'm running a Java data import process on a 32-bit Ubuntu 10 PAE kernel machine. After running the process for a while, the oom-killer zaps my Java process. After some Googling and digging through docs, it looks like the system is running out of LowMem. I started the process for the third time and am watching free -lm show me Low: 464 386 77 with the free value (77MB) slowly decreasing. Why am I running out of lowmem and how do I increase it? Some details: $ cat /proc/sys/vm/lowmem_reserve_ratio 256 256 32 $ free -lm total used free shared buffers cached Mem: 32086 24611 7475 0 0 24012 Low: 464 407 57 High: 31621 24204 7417 -/+ buffers/cache: 598 31487 Swap: 2047 0 2047

  Read the article

• Linux IPTables / routing issue

  - by Jon

  Hi all, EDIT 1/3/10 22:00 GMT - rewrote some of it after further investigation It has been a while since I looked at IPtables and I seem to be worse than before as I can not seem to get my webserver online. Below is my firewall rules on the gateway server that is running the dhcp server accessing the net. The webserver is inside my network on a static IP (192.168.0.98, default port). When I use Nmap or GRC.com I see that port 80 is open on the gateway server but when I browse to it, (via public URL. http://www.houseofhawkins.com) it always fails with a connection error, (nmap cannot connect and figure out what the web server is either). I can nmap the webserver and browse to it just fine via same IP inside my network. I believe it is my IPTable rules that are not letting it through. Internally I can route all my requests. Each machine can browse to the website and traffic works just fine. I can MSTSC / ssh to all the webservers internally and they inturn can connect to the web. IPTABLE: *EDIT - Added new firewall rules 2/3/10 * #!/bin/sh iptables="/sbin/iptables" modprobe="/sbin/modprobe" depmod="/sbin/depmod" EXTIF="eth2" INTIF="eth1" load () { $depmod -a $modprobe ip_tables $modprobe ip_conntrack $modprobe ip_conntrack_ftp $modprobe ip_conntrack_irc $modprobe iptable_nat $modprobe ip_nat_ftp echo "enable forwarding.." echo "1" > /proc/sys/net/ipv4/ip_forward echo "enable dynamic addr" echo "1" > /proc/sys/net/ipv4/ip_dynaddr # start firewall # default policies $iptables -P INPUT DROP $iptables -F INPUT $iptables -P OUTPUT DROP $iptables -F OUTPUT $iptables -P FORWARD DROP $iptables -F FORWARD $iptables -t nat -F #echo " Opening loopback interface for socket based services." $iptables -A INPUT -i lo -j ACCEPT $iptables -A OUTPUT -o lo -j ACCEPT #echo " Allow all connections OUT and only existing and related ones IN" $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A OUTPUT -o $EXTIF -j ACCEPT $iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT $iptables -A FORWARD -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A INPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A OUTPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " #echo " Enabling SNAT (MASQUERADE) functionality on $EXTIF" $iptables -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A OUTPUT -o $INTIF -j ACCEPT #echo " Allowing packets with ICMP data (i.e. ping)." $iptables -A INPUT -p icmp -j ACCEPT $iptables -A OUTPUT -p icmp -j ACCEPT $iptables -A INPUT -p udp -i $INTIF --dport 67 -m state --state NEW -j ACCEPT #echo " Port 137 is for NetBIOS." $iptables -A INPUT -i $INTIF -p udp --dport 137 -j ACCEPT $iptables -A OUTPUT -o $INTIF -p udp --dport 137 -j ACCEPT #echo " Opening port 53 for DNS queries." $iptables -A INPUT -p udp -i $EXTIF --sport 53 -j ACCEPT #echo " opening Apache webserver" $iptables -A PREROUTING -t nat -i $EXTIF -p tcp --dport 80 -j DNAT --to 192.168.0.96:80 $iptables -A FORWARD -p tcp -m state --state NEW -d 192.168.0.96 --dport 80 -j ACCEPT } flush () { echo "flushing rules..." $iptables -P FORWARD ACCEPT $iptables -F INPUT $iptables -P INPUT ACCEPT echo "rules flushed" } case "$1" in start|restart) flush load ;; stop) flush ;; *) echo "usage: start|stop|restart." ;; esac exit 0 route info: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 5e0412a6.bb.sky * 255.255.255.255 UH 0 0 0 eth2 192.168.0.0 * 255.255.255.0 U 0 0 0 eth1 default 5e0412a6.bb.sky 0.0.0.0 UG 100 0 0 eth2 ifconfig: eth1 Link encap:Ethernet HWaddr 00:22:b0:cf:4a:1c inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::222:b0ff:fecf:4a1c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:79023 errors:0 dropped:0 overruns:0 frame:0 TX packets:57786 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:11580918 (11.5 MB) TX bytes:22872030 (22.8 MB) Interrupt:17 Base address:0x2b00 eth2 Link encap:Ethernet HWaddr 00:0c:f1:7c:45:5b inet addr:94.4.18.166 Bcast:94.4.18.166 Mask:255.255.255.255 inet6 addr: fe80::20c:f1ff:fe7c:455b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:57038 errors:0 dropped:0 overruns:0 frame:0 TX packets:34532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:21631721 (21.6 MB) TX bytes:7685444 (7.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1517 (1.5 KB) TX bytes:1517 (1.5 KB) EDIT OK so as requested I will try and expand on my infrastructure: I previously had it setup with a Sky broadband modem router that did the DHCP and I used its web interface to port forward the web across to the web server. The network looked something like this: I have now replaced the sky modem with a dlink modem which gives the IP to the gateway server that now does the DHCP. It looks like: The internet connection is a standard broadband connection with a dynamic IP, (use zoneedit.com to keep it updated). I have tried it on each of the webservers(one Ubuntu Apache server and one WS2008 IIS7). I think there must also be an issue with my IPTable rules as it can route to my win7 box which has the default IIS7 page and that would not display when I forwarded all port 80 to it. I would be really grateful for any and all help with this. Thanks Jon

  Read the article

• setting ulimit and ubuntu 8.04

  - by Wizzard

  Hi there, We have two ubuntu 8.04 servers. With the database server I set the table_cache to 1000 however when I restart mysql the status only shows 257 and the open files limit says 1024 I adjusted ulimit by doing ulimit -n 8192 and then restarting mysql; this seemed to do the tick however after a few hours I did ulimit -n and saw it had returned back to 1024 Bit of a worry. I edited the /etc/security/limits.conf and added mysql soft nofile 8192 mysql hard nofile 8192 then rebooted, no change. I then edited and change mysql to * rebooted, no change I then edited and changed it to one line * - nofile 8192 and rebooted, no change. cat /proc/sys/fs/file-max gives me 768730 sysctl fs.file-max gives me fs.file-max = 768730 I am at a bit of a loss to how I can set and keep the ulimit value set so I can increase the table cache properly on mysql.

  Read the article

• Cronjob as root?

  - by Rob

  I'm having a bit of a problem with cronjobs for backups. I've set up the following in sudo crontab -e (not under personal account): 0 1 * * * /backups/dobackup /backups/dobackup contains this: #!/bin/sh touch ITRAN tar -cvpjf /backups/$(date +%d.%m.%Y)_backup.tar.bz2 --exclude=/backups --exclude=/proc --exclude=/lost+found --exclude=/sys --exclude=/mnt --exclude=/media --exclude=/dev / The backup file is created, but the file ITRAN is not. Also, the backup file is vastly smaller than expected: -rw-r--r-- 1 rjrudman root 371620259 2012-06-21 12:39 21.06.2012_backup.tar.bz2 -rw-r--r-- 1 rjrudman root 1023211449 2012-06-22 18:00 22.06.2012_backup.tar.bz2 -rw-r--r-- 1 rjrudman root 1512785 2012-06-23 01:00 23.06.2012_backup.tar.bz2 -rw-r--r-- 1 rjrudman root 1023272455 2012-06-24 22:41 24.06.2012_backup.tar.bz2 -rw-r--r-- 1 rjrudman root 1514027 2012-06-25 01:00 25.06.2012_backup.tar.bz2 The backups with much larger file sizes are created by manually running sudo /backups/dobackup. It seems the cronjob is failing at some point.. but I have no idea how to debug this issue or where to start. Any ideas? Running ubuntu 10.04

  Read the article

• DRBD Not syncing between my nodes

  - by Mike Curry

  Some version info: Operating system is Ubuntu 11.10, on EC2, kernel is 3.0.0-16-virtual and the application info is: Version: 8.3.11 (api:88) GIT-hash: 0de839cee13a4160eed6037c4bddd066645e23c5 build by buildd@allspice, 2011-07-05 19:51:07 Getting some strange errors in dmesg (seen below) as well, there is no replication happening. I have made my first node primary and its showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Primary/Unknown UpToDate/DUnknown r----s ext3 my secondary node is showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Secondary/Unknown Inconsistent/DUnknown r----s Showing /proc/drbd on the master shows: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Primary/Unknown ds:UpToDate/DUnknown r----s ns:0 nr:0 dw:4 dr:1073 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Showing /proc/drbd on the slave shows that there is nothing being transfered... version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Secondary/Unknown ds:Inconsistent/DUnknown r----s ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Here is my config... resource r0 { protocol C; startup { wfc-timeout 15; degr-wfc-timeout 60; } net { cram-hmac-alg sha1; shared-secret "test123; } on drbd01 { device /dev/drbd0; disk /dev/xvdm; address 23.XX.XX.XX:7788; # blocked out ip meta-disk internal; } on drbd02 { device /dev/drbd0; disk /dev/xvdm; address 184.XX.XX.XX:7788; #blocked out ip meta-disk internal; } } I have run the following on the master: sudo drbdadm -- --overwrite-data-of-peer primary all There is no firewall between the systems. Here is the dmesg with some errors: [2285172.969955] drbd: initialized. Version: 8.3.11 (api:88/proto:86-96) [2285172.969960] drbd: srcversion: DA5A13F16DE6553FC7CE9B2 [2285172.969962] drbd: registered as block device major 147 [2285172.969965] drbd: minor_table @ 0xffff88000276ea00 [2285173.000952] block drbd0: Starting worker thread (from drbdsetup [1300]) [2285173.003971] block drbd0: disk( Diskless -> Attaching ) [2285173.006150] block drbd0: No usable activity log found. [2285173.006154] block drbd0: Method to ensure write ordering: flush [2285173.006158] block drbd0: max BIO size = 4096 [2285173.006165] block drbd0: drbd_bm_resize called with capacity == 524271928 [2285173.008512] block drbd0: resync bitmap: bits=65533991 words=1023969 pages=2000 [2285173.008518] block drbd0: size = 250 GB (262135964 KB) [2285173.079566] block drbd0: bitmap READ of 2000 pages took 17 jiffies [2285173.081189] block drbd0: recounting of set bits took additional 1 jiffies [2285173.081194] block drbd0: 250 GB (65533991 bits) marked out-of-sync by on disk bit-map. [2285173.081203] block drbd0: Suspended AL updates [2285173.081210] block drbd0: disk( Attaching -> UpToDate ) [2285173.081214] block drbd0: attached to UUIDs 1C1291D39584C1D1:0000000000000004:0000000000000000:0000000000000000 [2285173.095016] block drbd0: conn( StandAlone -> Unconnected ) [2285173.095046] block drbd0: Starting receiver thread (from drbd0_worker [1301]) [2285173.099297] block drbd0: receiver (re)started [2285173.099304] block drbd0: conn( Unconnected -> WFConnection ) [2285173.099330] block drbd0: bind before connect failed, err = -99 [2285173.099346] block drbd0: conn( WFConnection -> Disconnecting ) [2285173.295788] block drbd0: Discarding network configuration. [2285173.295815] block drbd0: Connection closed [2285173.295826] block drbd0: conn( Disconnecting -> StandAlone ) [2285173.295840] block drbd0: receiver terminated [2285173.295844] block drbd0: Terminating drbd0_receiver Edit: Reading some other similar issues, it was suggested to do a 'drbdadm dump all', so I figured it couldn't hurt. ubuntu@drbd01:~$ drbdadm dump all /etc/drbd.conf:19: in resource r0, on drbd01: IP 23.XX.XX.XX not found on this host. and on slave: root@drbd02:~# drbdadm dump all /etc/drbd.conf:25: in resource r0, on drbd02: IP 184.XX.XX.XX not found on this host. Strange it doesn't find its own ip, however, this is an Amazon EC2 system using an elastic IP... here are my ipconfigs for both... master: ubuntu@drbd01:~$ ifconfig eth0 Link encap:Ethernet HWaddr 22:00:0a:1c:27:11 inet addr:10.28.39.17 Bcast:10.28.39.63 Mask:255.255.255.192 inet6 addr: fe80::2000:aff:fe1c:2711/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1569 errors:0 dropped:0 overruns:0 frame:0 TX packets:1169 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:124409 (124.4 KB) TX bytes:213601 (213.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) slave: root@drbd02:~# ifconfig eth0 Link encap:Ethernet HWaddr 12:31:3f:00:14:9d inet addr:10.160.27.107 Bcast:10.160.27.255 Mask:255.255.254.0 inet6 addr: fe80::1031:3fff:fe00:149d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:774 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:75381 (75.3 KB) TX bytes:109673 (109.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

  Read the article

• Beginners security question

  - by Reg H

  Hi everyone, I'm still pretty new to web development, and have a question about security. Every day I look at the "Latest Visitors" in my CPanel, and today there were some strange entries (one is pasted below). Not knowing any better, it looks to me like there is some site that's referring users to my site, for some reason. Can someone explain what these really are, and if it's something to be concerned about? Thanks! Host: 77.68.38.175 /?p=http://teen-37.net/myid.jpg? Http Code: 404 Date: Feb 17 08:13:58 Http Version: HTTP/1.1 Size in Bytes: - Referer: - Agent: libwww-perl/5.805 * /?p=../../../../../../../../../../../../../../../proc/self/environ%00 Http Code: 404 Date: Feb 17 08:13:59 Http Version: HTTP/1.1 Size in Bytes: - Referer: - Agent: libwww-perl/5.805

  Read the article

• Linux memory fragmentation

  - by Raghu

  Hi all, Is there a way to detect memory fragmentation on linux ? This is because on some long running servers I have noticed performance degradation and only after I restart process I see better performance. I noticed it more when using linux huge page support -- are huge pages in linux more prone to fragmentation ? I have looked at /proc/buddyinfo in particular. I want to know whether there are any better ways(not just CLI commands per se, any program or theoretical background would do) to look at it.

  Read the article

• No sound on Debian unstable Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller

  - by Dave Roger

  I have no sound on my Debian unstable. # cat /etc/issue Debian GNU/Linux squeeze/sid # lspci |grep -i audio 00:1b.0 Audio device: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller (rev 02) # lsmod | grep -i snd snd_hda_codec_realtek 235506 1 snd_hda_intel 19907 0 snd_hda_codec 54244 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 5380 1 snd_hda_codec snd_pcm_oss 32591 0 snd_mixer_oss 12606 1 snd_pcm_oss snd_pcm 60471 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi 4400 0 snd_rawmidi 15515 1 snd_seq_midi snd_seq_midi_event 4628 1 snd_seq_midi snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event snd_timer 15582 2 snd_pcm,snd_seq snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq snd 46446 11 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 4598 1 snd snd_page_alloc 6249 2 snd_hda_intel,snd_pcm # cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.21. # uname -r 2.6.32-5-amd64

  Read the article

• LFD always stops working after ~30 days, until I give /etc/csf/csf.pl -r

  - by gus

  When I give /etc/csf/csf.pl -r , I see lots of lines flushing, then I begin to get the notification emails again, (several emails per day), for example: Time: Wed Sep 12 08:39:47 2012 +0800 IP: 221.13.104.162 (CN/China/-) Failures: 5 (sshd) Interval: 300 seconds Blocked: Permanent Block Log entries: Sep 12 08:39:25 MyHost sshd[9677]: Failed password for root from 221.13.104.162 port 51106 ssh2 Sep 12 08:39:28 MyHost sshd[9712]: Failed password for root from 221.13.104.162 port 51690 ssh2 Sep 12 08:39:32 MyHost sshd[9739]: Failed password for root from 221.13.104.162 port 52128 ssh2 Sep 12 08:39:36 MyHost sshd[9778]: Failed password for root from 221.13.104.162 port 52670 ssh2 Sep 12 08:39:40 MyHost sshd[9821]: Failed password for root from 221.13.104.162 port 53155 ssh2 And then after about 30 days, the emails stop coming, it is as if something has filled up, and requires flushing again. I don't know much about CSF/LFD, but I would have imagined that this would work in a FIFO manner, so it should be able to run indefinitely within finite space. My /etc/csf/version.txt says 4.83 My cat /proc/version says Linux version 2.6.18-028stab066.8 (root@rhel5-64-build) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Fri Nov 27 20:19:25 MSK 2009

  Read the article

• Gre Tunnel Cisco Linux traffic forwarding

  - by mezgani

  I setup a gre tunnel a cisco router and a Linux machine, the tunnel interface in the Linux box named pic. Well i have to forward traffic coming from cisco through the Linux box. the rules i've set in the Linux box is described as follow: echo "1" /proc/sys/net/ipv4/ip_forward iptables -A INPUT -p 47 -j ACCEPT iptables -A FORWARD -i ppp0 -j ACCEPT iptables -A FORWARD -i pic -o ppp0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i ppp0 -o pic -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE I see the traffic coming from tunnel and forwarded to internet but no reply from sent packet. May i miss something like a routing rule.

  Read the article

• Retrieving an RSA key from a running instance of Apache?

  - by Nathan Osman

  I created an RSA keypair for an SSL certificate and stored the private key in /etc/ssl/private/server.key. Unfortunately this was the only copy of the private key that I had. Then I accidentally overwrote the file on disk (yes, I know). Apache is still running and still serving SSL requests, leading me to believe that there may be hope in recovering the private key. (Perhaps there is a symbolic link somewhere in /proc or something?) This server is running Ubuntu 12.04 LTS.

  Read the article

• EBS full device confusion

  - by Mike

  I have a 500GB EBS device (/dev/xvdf) mounted to /vol and all data on the box seems to be writing to /vol correctly (see du output below). For some reason /dev/xvda1 is totally full. Any idea what's going on here? $ df -h Filesystem Size Used Avail Use% Mounted on /dev/xvda1 32G 30G 8.0K 100% / udev 34G 8.0K 34G 1% /dev tmpfs 14G 176K 14G 1% /run none 5.0M 0 5.0M 0% /run/lock none 34G 0 34G 0% /run/shm /dev/xvdb 827G 201M 785G 1% /mnt /dev/xvdf 500G 145G 356G 29% /vol $ du -sh * 8.7M bin 18M boot 8.0K dev 5.1M etc 48K home 0 initrd.img 80M lib 4.0K lib64 16K lost+found 4.0K media 20K mnt 4.0K opt 0 proc 40K root 176K run 7.1M sbin 4.0K selinux 4.0K srv 0 sys 4.0K tmp 414M usr 356M var 0 vmlinuz 145G vol

  Read the article

• Amazon ec2 folder missing

  - by CQM

  To set permissions on the settings file On your Amazon EC2 instance, at a command prompt, use the following command to set permissions: sudo chmod 666 /var/www/html/sites/default/settings.php except I don't have a www folder in my instance [ec2-user@ip-10-242-118-215 ~]$ cd / [ec2-user@ip-10-242-118-215 /]$ ls bin cgroup etc lib local media opt root selinux sys usr boot dev home lib64 lost+found mnt proc sbin srv tmp var [ec2-user@ip-10-242-118-215 /]$ cd var [ec2-user@ip-10-242-118-215 var]$ ls account db games local log nis preserve run tmp cache empty lib lock mail opt racoon spool yp Please advise, did I forget to install something that the amazon instructions assumed I knew about? Running 64bit Amazon linux ami march 2012 I feel like the webserver is missing?

  Read the article

• procfs and youtube flash video

  - by trideceth12

  Up until recently (about 3 months ago), ALL open flash videos had deleted file handles in the procfs virtual folder for the flash plugin, I could see them thus: ps x|grep flash cd /proc/#PROCESS#/fd ls -l cp #FILE# ~/ This still works for the vast majority of flash video, but some YouTube videos no longer keep this open file handle. My questions are: A) Why not? B) Where are these files now stored? C) How can I get this file Yes I know I could probably get a browser plugin, it just annoys me that they are hiding these files so I want to keep doing it the hard way.

  Read the article

• forward ssh ports on EC2

  - by Will Glass

  I have an SSH server on a private subnet within an EC2 vpc listening for ssh on port 9022 I also have a nat instance (standard Amazon EC2 nat) on a public instance. I would like to forward incoming SSH connections (port 9022) to my nat to the internal server (port 9022). I tried this, but it didn't work: sudo iptables -t nat -I PREROUTING -p tcp -i eth0 --dport 9022 -j DNAT --to-destination 10.0.2.11:9022 I verified that 10.0.2.11 is listening on port 9022. (I can telnet). I verified my security group allows incoming port 9022. I verified that /proc/sys/net/ipv4/ip_forward is 1. What am I missing? Edit: Turns out this was correct after all. I had a mistake in my security group.

  Read the article

• Is there a test to see if hardware virtualization (vmx / xvm) are presently enabled within a Linux session?

  - by Dr. Edward Morbius

  I'm writing procedures for configuring VirtualBox support for 64-bit SMP guests, which requires hardware virtualization suppot (VTx/Intel, AMD-V/AMD). I have successfully configured this myself, however I'd like the procedure to be clear. sed -ne '/^flags/s/^.*: //p' /proc/cpuinfo | egrep -q '(vmx|svm)' && echo Has hardware virt || echo No HW virt ... shows if the CPU is capable. I've still got to go enable the feature in BIOS. Any way to test from within Linux to see that this is no or not? Thanks.

  Read the article

< Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >