Search Results

Search found 9271 results on 371 pages for 'whole foods'.

Page 126/371 | < Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >

• Is it reasonable to use my Time Machine backup to migrate to a new primary hard drive?

  - by Michael Haren

  I'm planning to upgrade my MacBook's harddrive. I already use Time Machine to back up the system to an external drive. Is it reasonable to use Time Machine to restore my system to the new laptop drive, once I install it? I mean, a restore like this really ought to be fine, right? That's the point of it, after all! I know imaging the drive would be more appropriate but this plan seems a whole lot easier (albeit probably slower), with practically no risk since my original drive won't be involved. A second question would then be, are there any considerations to be made when doing a Time Machine restore?

  Read the article

• Lot of Multicast traffic on LAN

  - by Nel

  Recently the whole network at work is being hit by multicast traffic originating on the LAN itself. I did some investigating and the service which seems to be responsible is ws-discovery. I have attached a screenshot of wireshark capturing the traffic. I have tried shutting down the source machine from which it was originating, but the multicast traffic still seems to be present in the network. My network topology 2 subnets - 10.10.10.0/24 and 10.20.10.0/24. Gateway is a debian system. We have 3 switches for 3 floors. They are all unmanaged Dlink 24-port switches. Multicast blocking at switch level is out of the question. Any solutions? :(

  Read the article

• Limited RGB range due to HDMI cable?

  - by Cedric Reichenbach

  I have a NVidia GeForce GTX 660, connected to a Samsung SyncMaster S24B350 through a HDMI cable. On my computer, I'm running both, Windows 8 and Linux Mint. I think that something might prevent my system from using the whole RGB spectrum, since bright colors seem to vanish into white under standard settings. However, under Linux I could switch to a limited color range mode (16-235) and suddenly, the image looked much better. Is it possible that the HDMI cable limits color range (since it was originally inteded for TVs)? Is there a way of switching to limited color range mode in Windows 8 as well?

  Read the article

• I need a few minutes of dedicated server a week, but not for hosting, just to convert ogg etc.

  - by talkingnews

  I'm completely happy with my webhosting, it's just that I need to do one little thing they won't allow, and that's run an instance of Sox to convert about 30 mp3s to ogg files, in various directories, a couple of times a week, to be done automatically in response to the detection of the upload of an mp3. Probably looking at a minute of server time over the whole week. I've had unhelpful suggestions on other forums like "why not leave your home PC on 24 hours a day and then use all your isp bandwidth to do this", which doesn't work for me. I know that I can host files on, say, Amazon S3, but is there something similar for my needs? All it would need to do would be: wget/ftp the mp3 files, convert them to ogg, ftp the files back to my hosting. Of course, all this wouldn't be needed if there was such a thing as a compiled binary of Sox (or any mp3ogg converter) for Centos which I could upload without needing root access, but I've given up asking that one, but always open to suggestions!

  Read the article

• RAID5 on SmartArray P410i online resize

  - by datacompboy

  I have P410i+256M Cache without battery backup. My RAID5 was build over 3*136GB disks, now all disks were replaced to a 3*300GB array. How can I extend it to use the whole space? HPacucli doesn't allows that, I think this might be because no battery is present. I have a redundant power supply. All data is mirrored over DRBD to a secondary server, so I can try to resize with a chance of loss of data in case of power failure, but I prefer to have an online resize.

  Read the article

• How to choose size for a cloud server (rackspace)

  - by Emil

  We're going to test the rackspace cloud next week to see how it's working with our web app. It's a LAMP environment with a lot of MySQL databases. How do I choose the "right" server size? On Rackspace I can choose slices with the memory of 256, 512, 1024, 2048, 4096 etc. Right now we don't have a lot of traffic (approx. 1000 visitors/day) but I thought the whole "cloud" idea was to not be limited and auto scale. Update: What I'm looking for is now a specification of what I need. I know it's too complex. I'm looking for examples, case studies etc. It would be interesting to hear something like "Yes we're serving 10 000 daily requests without spikes on a LAMP stack with only one slice on with 2 GB RAM".

  Read the article

• What is the best software for desktop recording?

  - by Ivo Flipse

  I know this question is partially a stub from: http://superuser.com/questions/201/free-desktop-recording-screencasting-on-windows However I would have to use this at work, so it doesn't have to be free, just work very well. Lended from the free post: I would expect such an application to have these features: choose the whole desktop, a region, a window to record zoom in an area, and camera move save the recorded movie to a compressed format have basic editing tools have the mouse highlighting feature highlight window/field on the screen, any trick will do display pressed keys/key combinations (like iphone does) So the question is: Which desktop recording/screencasting software would you recommend?

  Read the article

• Website crawler/spider to get site map

  - by ack__

  I need to retrieve a whole website map, in a format like : http://example.org/ http://example.org/product/ http://example.org/service/ http://example.org/about/ http://example.org/product/viewproduct/ I need it to be linked-based (no file or dir brute-force), like : parse homepage - retrieve all links - explore them - retrieve links, ... And I also need the ability to detect if a page is a "template" to not retrieve all of the "child-pages". For example if the following links are found : http://example.org/product/viewproduct?id=1 http://example.org/product/viewproduct?id=2 http://example.org/product/viewproduct?id=3 I need to get only once the http://example.org/product/viewproduct I've looked into HTTtracks, wget (with spider-option), but nothing conclusive so far. The soft/tool should be downloadable, and I prefer if it runs on Linux. It can be written in any language. Thanks

  Read the article

• Weird outline numbering in Microsoft Word 2008

  - by GarnerCX

  This is quite a weird question, as I think I am asking the opposite of what most people want to try and achieve with outline numbering in Microsoft Word. The outline numbering associated with the styles "Heading 1" and "Heading 2" are fine and working as normal, but the outline numbering associated with all the heading styles from "Heading 3" onwards are broken. Here is a summary of how they look: 1 1.1 1.2 2 2.1 3 3.1 1.1.1 1.1.2 4 4.1 1.1.3 So you can see that while the first two headings are numbering correctly down the document, the third level heading doesn't restart and it doesn't have the correct 1st and 2nd level numbering - they all have '1.1' as a prefix. These are all controlled by the heading styles and I have tried every combination of options in the outline numbering section of the styles. Short of building a whole new template, recreating all my custom styles and then pasting the text across, I really don't know what to do. Before I try that, does anyone know what is going on here?

  Read the article

• Linux Software RAID: How to fsck on hard drive?

  - by Rick-Rainer Ludwig

  We have a Linux server running with Software RAID1. We see some issues in /var/log/messages like: unreadable sector. I want to perform a complete fsck on the drive to get some more information, but a fsck /dev/md0 brings a clean due to the Software RAID layer in between. How can I check the real hard drive? Do I need to disassemble the whole RAID? How do I deal with the inconsistency in the partition due to the additional Software RAID header? Does anyone have a good idea for this?

  Read the article

• Restore complete PC from another computer

  - by Mirage

  I have a few friends which keep on coming to me every month to format their laptops and then reinstall Windows. This is time consuming. Is there any way that I can make an image of their full system on my Harddrive and then restore to their Laptop from my computer? Edit: What I want is I have the image of the whole laptop on my desktop. The laptop is formatted with no OS. I have no CD/DVD to put in laptop (as the image is 15GB). How will I trasfer the image from my desktop to the laptop without using CD/DVD? Any option for booting via network, etc?

  Read the article

• For large files compress first then transfer or rsync -z? which would be fastest?

  I have a ton of relativity small data files but they take up about 50 GB and I need them transferred to a different machine. I was trying to think of the most efficient way to do this. Thoughts I had were to gzip the whole thing then rsync it and decompress it, rely on rsync -z for compression, gzip then use rsync -z. I am not sure which would be most efficient since I am not sure how exactly rsync -z is implemented. Any ideas on which option would be the fastest?

  Read the article

• How do I apply WinHTTP proxy settings domain-wide?

  - by Oliver Salzburg

  We're already configuring Internet Explorer proxy settings through group policy and it works great. Sadly, I've recently run into multiple issues where those settings are ignored by certain services. I realized that these service have one thing in common. They use WinHTTP, which has its own proxy settings. Now I'm asking myself how to apply those across the whole domain. I realize that I could create a logon script and simply run netsh winhttp import proxy source=ie, but, from experience I know that these settings require a reboot to take effect. So this wouldn't help me at all in a logon script. So, how can I do it?

  Read the article

• How to make BASH try and autocomplete on Enter

  - by swatso33

  I've noticed that for many of the commands I use in bash I have actually learned how many letters of the command I must type before I can press [TAB] to have bash successfully autocomplete the command. For example when opening chromium I dont usually type the whole command but instead type $ chrom[TAB][ENTER] and bash successfully autocompletes the command to chromium before I hit the [ENTER] key. Is there a way to make autocomplete work without having to hit [TAB]? My general thinking is that if I type $ chrom[ENTER] bash could check and see that chrom isnt a valid command, but it would make sense to autocomplete it to chromium since that is the only command that starts with chrom

  Read the article

• Apache only transferring partial content from a Samba share

  - by thaBadDawg

  I have an Apache server running on CentOS 5.3. It currently hosts 12 sites with no known issues. (I say this to point out that up to this point my Apache installation has performed flawlessly) I'm adding a new site where the DocumentRoot of the new VirtualHost is a Samba share. When at the command line of the server I can cp video.m4v ~ and the whole file is copied properly to my home directory. But when I try to access the file from IE/Firefox/Safari/Chrome it only passes back a partial result of 33k. The same thing is happening with my image and audio files. If I make the files local to the server by copying them from the share and then serving them up then the files transfer. Any ideas?

  Read the article

• how to create iso dvd image for use with mac/osx "Disk Utility"?

  - by adolf garlic

  This seemed way easier on my pc. I would just pop a blank dvd in the drive, it asked what I wanted to do with it, to which I would respond, "burn dvd with nero" (paraphrasing), then I would pick "new" and just drag and drop the folders in there. Mac appears to have "Disk Utility" which just requires that I 'choose an image' but then doesn't bother to detail - how to do this - what the options mean e.g. format "mac OS extended (journaled)" is that ever going to be readable on a non mac machine? I want to create an ISO standard dvd as per the 'default' you'd get on nero. All the stuff on the web points to doing things with 'terminal' (the whole point of buying a mac was to get away from command line jiggery pokery - I'm trying to burn some photos not land a friggin lunar module here!) Please, if you can just provide some simple instructions on what I need to achive this I'd be extremely grateful. Ta muchley in advance.

  Read the article

• redirect all youtube video requests to a specific one

  - by iTayb

  I'm on an IT team in my company and I would like to block youtube to users. I don't want to just deny access to the whole youtube domain, but only to replace the .flv/.mp4 request with the one that I want. That way, if someone tries to watch youtube videos on the network, He'll get a video of why using our expensive bandwidth for pleasure is a no-no. I thought about using a packet manipulation program and just replace the video ID with something that I want, but I didn't manage to do it right.

  Read the article

• sysprep'd Server 2008 R2 VMware autocheck BSODs

  - by slag

  I'm trying to set up a template Server 2k8 R2 (Standard) VM in our VMware ESXi environment, we'll need to deploy a whole lot of them and I want to (a) streamline and (b) standardise the server build process. Originally I built a sysprep answer file using WAIK and the Windows System Image Manager - once I'd run sysprep using this, restarting the machine resulted in a "autochk.exe not found - skipping autocheck" message, followed almost immediately by a BSOD. Rebooting just resulted in the same thing. I first assumed it was my answer file, but have now checked this on a physical machine and it works fine. I've reinstalled the OS on the machine (and NOTHING else), and run sysprep.exe (ticking Generalize) - this produces exactly the same result. I've also attempted to use the Customisation Wizard built in to VMware - again, the same autocheck message and BSOD is the result. Any ideas? Let me know any further information I need to provide...

  Read the article

• Why would a terminal server be kicking users off after about 5 minutes?

  - by Matt

  I have a terminal server that was restored from an old 1U server to an IBM HS20 Blade running ESXi. The restore was using shadow protect hardware independent restore. All appeared to be functioning well but we're finding that users are being periodically kicked off after around 5 minutes or so. The interesting thing is it doesn't appear to be a simple disconnect but the whole session has gone like it was logged out. There is nothing significant in the event log, and certainly nothing from terminal services that is logged. I've also checked the client computers and from the client computers logged into our other terminal server and there wasn't any issues there. It doesn't appear to be network related. Any ideas?

  Read the article

• Using a Mac to share a VPN connection

  - by Luis Novo

  I am using an iMac to share a wired network connection with other devices in my house. I am using Apple's built-in sharing functionality which works very well. I have also been using Tunnelblick as an OpenVPN client. The two technologies work great when they are not used together. The moment I connect to my VPN, sharing stops working on all other devices; the whole point of this setup was for me to share my VPN connection. Is there a way to make Internet connection sharing and OpenVPN work together on the Mac? I am using Snow Leopard.

  Read the article

• copy boot-able partition

  - by Dima

  I have an disk image with 3 partitions: first partition (hd0,0) is boot-able with GRUB1 with the following configuration GRUB file: default=0 timeout=5 title Bank A root (hd0,1) chainloader +1 title Bank B root (hd0,2) chainloader +1 The partitions (hd0,1) and (hd0,2) are also boot-able. I'm trying to clone partition (hd0,1) to (hd0,2) by creating device map using kpartx and copying whole partition using dd command. The problem is: after partition cloning, the cloned partition did not boot (but all files are OK). What the wrong? I need both partitions to bee identical (I'm using them for fail-over purposes into embedded device)

  Read the article

• Match exactly (and only) the pattern I specify in a grep command

  - by palswim

  Usually, grep searches for all lines containing a match for the pattern/parameter I specify. I would like to match just the pattern (i.e. not the whole line). So, if a file contains the lines: We said that we'll come. Unfortunately, we were delayed. Now, we're on our way. I want to find all contractions starting with "we" (regex pattern: we\'[a-z]+/i). And I'm looking for the output: we'll we're How do I do this (with grep or another Unix/Windows command-line tool)?

  Read the article

• Rainmeter customization issues, pretty basic

  - by user62865

  I'll admit it; I'm new to using Rainmeter. What I want to do is create two panels (one left, the other on the right) that mirror one another. One side I want to work for the Eastern US while the other for the UK. I want to keep digital clocks, the same style etc., on both sides with their respective time zone. On top of this I want to have weather reports for the whole day (Current weather and temp, morning, afternoon, and night) for each location. However, I have not been able to find any skins which allow this. For whatever reason every time I try to load a skin for a clock I can only load it for one clock of that type and I'm having the same issue with the weather skins. Could anyone please tell me what skins I should look at and how to get a mirrored look?

  Read the article

• design a large scale network for an organization

  - by Essam

  i want to design a large scale network for an organization with HQ and two branches. i want to use a class A subnet. if i am using the network address 30.0.0.0 for the whole organization how can it be different from another organization company or whatever which is using the same address in another country? now i have the three locations for this organization,so i need 5 subnets [one for the HQ,two for branch A and branch B , one for connecting A to HQ and one for connecting branch B with HQ since i will use central DHCP server at the HQ,is that (number of subnetting) right? is it advisable to use class A or class B for this organization it term of address that will be wasted (let's say it is a university with two branches in two different states)?!

  Read the article

• Why are my files in /var/lock and where did they just go?!

  - by Nicky Hajal

  I am hosting a website on Debian 5.0 & Apache2. Today one of my websites was down, Apache said it couldn't find the directory. I located the files and the whole site once in /var/www/site was now /var/lock/site. All the files were present. I was confused, but figured I'd just move it back. mv /var/lock/site /var/www All looked fine... Except that only the directories moved and the files appear to be lost! I am working on restoring from backups but I would really love to know what happened and where my files went (the backups are a few days old). Thanks for your help!

  Read the article

< Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >