Search Results

Search found 13518 results on 541 pages for 'daniel root'.

Page 127/541 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

• Linux + IPTables + NAT = some http hosts unreachable.

  - by Daniel

  Hi. I've set up dead simple NAT: iptables -t nat -A POSTROUTING -s 192.168.1.0/24 -o ppp0 -j MASQUERADE Everything works almost ok. Almost. The problem I've expirienced is some hosts are not reachable by NAT clients, i.e. there's http://code.jquery.com/jquery-1.4.2.min.js - I can download it from server, but in case of NAT client download stalls on connection stage. I thought its FFs fault, but wget has the same issue. I didn't find any logs/messages that can shed some light on this situtation. Any ideas what's going on? Maybe some tricky thing in sysclt is causing this? P.S. 3/3 client boxes are expiriencing this issue. This is definitely server trouble.

  Read the article

• Configure IIS to pass-through CGI output without any conditioning

  - by Daniel Watrous

  I'm building a web service on Windows 2008 R2 with IIS 7.5 and Python 2.5. Right now I have the Handler Mappings and everything else setup just fine, Except that IIS is modifying what it gets back from the CGI script before sending it along the the client. Here's an example: I wrote the following CGI script: # hello.py print "Status: 400 Bad Request" print "Content-Type: text/html" print print "Error Message" According to the HTTP spec this should be fine and a Status of 400 should allow for a description of the error message in the body of the response. When the server response actually comes back to me I get the following: Status: 400 Bad Request Date: Fri, 11 Feb 2011 17:58:30 GMT X-Powered-By: ASP.NET Connection: close Content-Length: 11 Server: Microsoft-IIS/7.5 Content-Type: text/html Bad Request I've seen on this forum and others where I can change or eliminate the X-Powered-By header element, but I would like IIS to leave it alone altogether. I'm not sure why it takes my response, deletes "Error Message" from the body and replaces it with "Bad Request" and then adds all that other junk in. Is there some way to tell IIS to just send the response along without making any changes at all?

  Read the article

• Apache htaccess with mod_expires Not Working for certain directories

  - by keyboarddrummer

  I have a Joomla site that I am trying to enable caching using mod_expires. I have the .htaccess in the root of the site and have added the options as found on the page http://www.pactsoftware.nl/tools/joomla-optimization.html Using the PageSpeed extension in Chrome, prior to adding this in my .htaccess, my site scores a 55 (Caching is at the top, and lists a lot of images, CSS, and JS files). After these directives, it scores 70, with caching in the yellow, but still lists some image files (some are two directories deep and the rest are four). I checked for any other .htaccess files in the Joomla root, but none are between those folders and the root. It is almost as if htaccess only works in that one directory, not the subfolders. I have tried putting a .htaccess in each affected subdirectory, but it does not work. Does anyone have any ideas?

  Read the article

• Gnome 3 screensaver (not suspend) resume hook?

  - by Daniel

  Since whenever my laptop screen resumes sleeping (i.e. wakes up from screensaving) some settings are reset, such as keyboard backlight, I'd like to run some scripts each time this happens. I'm using gnome 3 with fedora 17 by the way. When researching this issue I came across pm-utils which allows one to hook anything to events handled by pm-utils but it seems to me monitor sleeping (i.e. screensaving) is not one of them. Looks like pm-utils only handles suspend and hybernate. So is there a way to hook up custom programs to screensaver?

  Read the article

• Getting the general log to work in MySQL 5.6.8

  - by Benjamin

  I can't get the general log to work in this version of MySQL. I added the following lines to /usr/my.cnf: general_log = 1 general_log_file = "/var/log/mysql.log" Then restarted the server: [root@localhost ~]# service mysql restart Shutting down MySQL.. SUCCESS! Starting MySQL. SUCCESS! The settings seem to be taken into account: mysql> SHOW VARIABLES LIKE 'general_log%'; +------------------+--------------------+ | Variable_name | Value | +------------------+--------------------+ | general_log | ON | | general_log_file | /var/log/mysql.log | +------------------+--------------------+ 2 rows in set (0.01 sec) But the log is never created: [root@localhost ~]# mysqladmin flush-logs [root@localhost ~]# ls -al /var/log/mysql.log ls: cannot access /var/log/mysql.log: No such file or directory Any idea why?

  Read the article

• Debian: SSH: "PermitRootLogin=forced-commands-only" stopped working

  - by Brent

  I have several servers running Debian Lenny. Just recently I discovered the PermitRootLogin=forced-commands-only directive for ssh, which allows me to run a scripted rsync as root with an ssl key, without enabling more generalized root ssh access. However, last week this stopped working - it appears on all of my servers - and I can't figure out why. Everything continues to work fine with PermitRootLogin=yes, but I would prefer to block root logins - especially via passwords. The day it stopped working, we reconfigured some of the ports on one of our switches (which we later reverted), but I can't see that affecting this, since it still works with PermitRootLogin set to yes. How can I diagnose why the forced-commands-only directive has apparently stopped working?

  Read the article

• xcopy Not Surpressing File/Directory Query

  - by Daniel Bingham

  Hey folks, I'm attempting to use xcopy to copy over a file from one machine to another on our network as part of a Java program. I'm calling xcopy like this: xcopy "C:\Program Files\path\to\my\file" "\\othermachine\c$\Documents and Settings\<myUserName>\Desktop\Test\path\in\directory\structure\to\file" /e /y /i Because I'm calling it from with in Java, I need all the prompts to be suppressed. For the most part, \i and \y have done exactly that. However, for this one file /i fails and I get the file or directory prompt. The result is that it hangs the entire program. I've also tried calling it with /s /t /q appended on to the existing options, to no avail. Why isn't /i working to suppress the File or Directory prompt? Is there an order I need to call the options in? Is there something else I need to do? EDIT: I should mention, the file is a text file - single line of text. It does not have an extension. It looks like this: FILE-NAME

  Read the article

• Choose between multiple keyboard layouts for different users in GDM3

  - by Daniel Wagner

  I am trying to set up a computer with multiple users each with different preferred keyboard layouts. The biggest sticking point right now is allowing each to log in comfortably. GDM used to offer a way to choose keyboard layout, but I can't discover how to set this up in GDM3. All the solutions I found when Googling this problem suggest changing the keyboard layout in xorg.conf, but that only sets a different single layout and still does not seem to allow me to change the layout between multiple choices. How can I allow multiple layouts when logging in?

  Read the article

• How do I run strace or ltrace on Tomcat Catalina?

  - by flashnode

  Running ltrace isn't trivial. This RHEL 5.3 system has based on a Tomcat Catalina (servlet container) which uses text scripts to tie everything together. When I tried to find an executable here's the rabbit hole I went down: /etc/init.d/pki-ca9 calls dtomcat5-pki-ca9 ]# Path to the tomcat launch script (direct don't use wrapper) TOMCAT_SCRIPT=/usr/bin/dtomcat5-pki-ca9 /usr/bin/dtomcat5-pki-ca9 calls a watchdog program /usr/bin/nuxwdog -f $FNAME I replaced nuxwdog with a wrapper [root@qantas]# cat /usr/bin/nuxwdog #!/bin/bash ltrace -e open -o /tmp/ltrace.$(date +%s) /usr/bin/nuxwdog.bak $@ [root@qantas]# service pki-ca9 start Starting pki-ca9: [ OK ] [root@qantas]# cat /tmp/ltrace.1295036985 +++ exited (status 1) +++ This is ugly. How do I run strace or ltrace in tomcat?

  Read the article

• nike ocr twitter api rsvp software not working

  - by daniel

  I recently purchased an OCR program that reads through Nike's Twitter page and takes a circled word out of a picture and sends it back in a Twitter DM. However, it recently stopped working, probably because the person whom I bought it from deleted the server and hasn't responded to my emails. It is a Twitter API app. It still goes through the tweets and I can enter usernames, but it does not read the image anymore nor send a DM. If anyone knows how I can go about fixing this, it would be a huge help. Here is the program website: http://rsvpocr.nanoworking.com

  Read the article

• sendmail - DSN: Name Server host not found

  - by Daniel Mitchell

  I've recently setup a new backup server and have configured sendmail with a smart_relay_host Except every email from the command line doesn't go anywhere. From mail.log: Oct 3 14:32:52 **back01 sm-mta[16570]: p93DWqtC016568: to=<[email protected], ctladdr= (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=120762, relay=10.2.30.60, dsn=5.1.2, stat=Host unknown (Name server: 10.2.30.60: host not found) Oct 3 14:32:52 ***back01 sm-mta[16570]: p93DWqtC016568: p93DWqtC016570: DSN: Host unknown (Name server: 10.2.30.60: host not found) DNS is working correctly on this box. I can do forward and reverse lookups. I can also telnet to the mail relay and send a message that way. I'm stumped, any suggestions?

  Read the article

• HELP! Free space not reclaimed after online resizing ext4 in Ubuntu 9.10

  - by TiansHUo

  My root partition was filling up, with only 500 mbs left, I wanted to resize my root partition from 20 Gb to 40Gb So I resized my partition by using these steps: Using Gparted to resize another partition to give space for the EXT4 Using fdisk, deleting the root partition (on /dev/sda2), and creating it again using the new size resize2fs /dev/sda2 Updating grub2 But now the problem is that although I can boot in my new partition and the new partition shows it is 40Gb, but the free size was still 500mb. So I booted from a LiveCD and checked with e2fsck -p /dev/sda2, it reported clean. So I added the -f flag (force check), still, the drive is full.

  Read the article

• IPTABLE & IP-routed netwok solution for HOST net and VM's subnet

  - by Daniel

  I've got ProxmoxVE2.1 ruled KVM node on Debian and bunch of VM's guests machine. That is how my networking looks like: # network interface settings auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address 175.219.59.209 gateway 175.219.59.193 netmask 255.255.255.224 post-up echo 1 > /proc/sys/net/ipv4/conf/eth0/proxy_arp And I've got two working subnet solution auto vmbr0 iface vmbr0 inet static address 10.10.0.1 netmask 255.255.0.0 bridge_ports none bridge_stp off bridge_fd 0 post-up ip route add 10.10.0.1/24 dev vmbr0 This way I can reach internet, to resolve outside hosts, update and download everything I need but can't reach one guest VM out of any other VM's inside my network. The second solution allows me to communicate between VM's: auto vmbr1 iface vmbr1 inet static address 10.10.0.1 netmask 255.255.255.0 bridge_ports none bridge_stp off bridge_fd 0 post-up echo 1 > /proc/sys/net/ipv4/ip_forward post-up iptables -t nat -A POSTROUTING -s '10.10.0.0/24' -o vmbr1 -j MASQUERADE post-down iptables -t nat -D POSTROUTING -s '10.10.0.0/24' -o vmbr1 -j MASQUERADE I can even NAT internal addresses: -t nat -I PREROUTING -p tcp --dport 789 -j DNAT --to-destination 10.10.0.220:345 My inexperienced mind is ready to double VM's net adapters: one for the first solution and another - for second (with slightly different adresses) but I'm pretty sure that it's a dumb way to resolve the problem and everything can be resolved via iptables/ip route rules that I can't create. I've tried a dozen of "wizard manuals" and "howto's" to mix both solution but without success. Looking for an advice (and good reading links for networking begginers).

  Read the article

• Can IIS be configure to forward request to another web server?

  - by Daniel O

  I have several web site set up on one IIS 6 server distinguished by Host Header. However, I wish to have one of the sites served by a Linux / Apache server on my network. Do I need to use a reverse proxy add-in for IIS, or is there a simple way to tell IIS to pass on all requests to another server?

  Read the article

• How to fix /etc/ folder on Mac OS X

  - by justinhj

  I was following a tutorial which had this command to create a launchd.conf file in /etc/ sudo echo "some command" /etc/launchd.conf But it wouldn't work, I got permission denied after entering my admin password. So it seemed like the permissions for the link were wrong, so I did 'sudo chmod 755 /etc/' But now I can't load a terminal, I get the error The administrator has set your shell to an illegal value If I tried to sudo a command now I get sudo: can't open /private/etc/sudoers: Permission denied sudo: no valid sudoers sources found, quitting Process tramp/sudo root@localhost exited abnormally with code 1 This is what the link /etc looks like, what should it look like, and how do I restore it? lrwxr-xr-x 1 root wheel 11 Jul 21 2011 etc - private/etc /private/etc ... drw-r--r-- 111 root wheel 3774 Mar 26 02:25 etc edit: I'm using Mac OS X 10.7.3

  Read the article

• Change permission to /proc/net/ip_conntrack on Ubuntu server 9.10

  - by bjarkef

  Hi I have a script that needs to extract certain information form the /proc/net/ip_conntrack file once in a while. I do not wish to run this script as the root user. Default permissions for the file is: $ ls -lah /proc/net/ip_conntrack -r--r----- 1 root root 0 2010-03-28 12:18 /proc/net/ip_conntrack I can change it with: sudo chmod o+r /proc/net/ip_conntrack But that does not stick after a reboot. Is there some configuration file for file-permissions in the /proc directory in Ubuntu Server 9.10? Or do I just have to stick a chmod line in some startup script?

  Read the article

• how to remotely open an URL in Firefox in a specific profile?

  - by miernik

  I have several instances of Firefox with several different profiles running. Among them profiles with the names "software" and "test". I am trying to open an URL from a bash script to have it open in profile "test", like this: firefox -P "test" http://www.example.org/ However that opens it in profile "software" anyway. Any ideas? Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.8) Gecko/20100308 Iceweasel/3.5.8 (like Firefox/3.5.8) No, it is not a permissions problem, all my profile directories are perfectly under my permissions: root@przehyba:~/.mozilla# ls -ld firefox/ drwx------ 13 miernik miernik 4096 Mar 11 09:15 firefox/ root@przehyba:~/.mozilla# ls -ld firefox/* drwxr-xr-x 9 miernik miernik 4096 Mar 12 11:29 firefox/info -rw-r--r-- 1 miernik miernik 560 Mar 11 09:15 firefox/profiles.ini drwxr-xr-x 10 miernik miernik 4096 Mar 16 11:51 firefox/software drwxr-xr-x 9 miernik miernik 4096 Mar 11 09:14 firefox/tech drwxr-xr-x 11 miernik miernik 4096 Mar 15 22:48 firefox/test root@przehyba:~/.mozilla#

  Read the article

• Tomcat 5.5 - second application returs 404

  - by Tomas Tintera

  There are two versions of web application. Want to have both on one machine so I can test upgrade. If there is one of them copied to Tomcat's webapplications directory and then Tomcat is started, it works fine. So if there is only have only ...webapplicatios\ROOT\... ...webapplicatios\myApp25\... it works fine. Or when there is only ...\webapps\ROOT\... ...\webapps\myApp26\... it works fine too. If I upload both ...\webapps\ROOT and ...\webapps\myApp25 ...\webapps\myApp26 only one of the apps will work. The other one returns 404, page not found. It's running on Windows7 and I use Tomcat 5.5. Tomcat is just default installation. Any idea what to check? How to make both running both apps? Thank you in advance for any help. I'm beginner regarding TC.

  Read the article

• Rename Devices in Device Manager

  - by Luke

  This is mostly just for the USB ports, as I recognize everything else in computers.... Anyways, is there a way to rename, or otherwise, identify which USB port (or other hardware for that matter) is which device in Device Manager? I know I can plug in a flash drive, then see what port it is connected with, and find out that way. What I would like though, is to find out that a certain plug is always a certain device in Device Manager. If I can then have a system in mind that always has the same order, I can look and see if a USB port is not being detected or not working properly, and as I uninstall/reinstall USB devices, I know I won't lose my keyboard or mouse, for example. The OS in question currently is Windows 7, but I would accept a solution for ANY version of Windows USB Devices | +--+USB Root Hub Port A | | | ---Keyboard | +--+USB Root Hub Port B | | | ---Mouse | +--+USB Root Hub Port C | ---Empty

  Read the article

• How to run a script on startup in XP?

  - by Daniel Williams

  Just want to run a DOS script to set some parameters. Where do I put the batch file? Clarification: I want to run some DOS commands when I start a DOC prompt, mainly to set some aliases. This is really what I am looking for, not really when logging in or starting the system. I apologize for not being more clear. For example I want to run: doskey ls=dir Just so I can type ls rather than dir.

  Read the article

• Apache + plesk vhost problem: .htaccess ignored!

  - by DaNieL

  Hi guys, i have a problem with a simple apache configuration. When the user ask for https://mydomain.com i have to redirect it to https://www.mydomain.com, becose my https certificate is valid just for the domain with www. I create the vhost.conf into my /var/www/vhosts/mydomain.com/conf/ directory, with inside: <Directory /var/www/vhosts/mydomain.com/httpsdocs> AllowOverride All </Directory> And my .htaccess file into the /var/www/vhosts/mydomain.com/httpsdocs/ is: RewriteEngine on RewriteCond %{HTTPS_HOST} ^mydomain\.com RewriteRule ^(.*)$ https://www.mydomain.com/$1 [R=301,L] But seem like the .htaccess is completely ignored. Any idea?

  Read the article

• apache/nginx html file size limit

  - by Daniel

  When serving/sending HTML files to a users browser, where can I reconfigure this size limit? I want to send an extremely large html files to users via apache and nginx. Files are being truncated in apache/nginx, what setting determines the file size?

  Read the article

• How to forward connection from one interface to another under linux

  - by Daniel

  Hi, I have linux box which has two network interface, eth0, eth1. from eth1 I can access an internal website, say under port 8080. from outside the box, I can't access that network. my question is, is there a way I set up something so from outside the box, there appears to be a web server running in port 8080 and when I connect to it, it automatically forwards to eht1 the internal site? I tried to enable ip forward and add a static route, but it doesn't work. thanks.

  Read the article

• php registration form - limit emails [closed]

  - by Daniel

  i want to restrict certain emails to my website. an example would be that i only want people with gmail accounts to register to my website. { /* Check if valid email address */ $regex = "^[_+a-z0-9-]+(\.[_+a-z0-9-]+)*" ."@[a-z0-9-]+(\.[a-z0-9-]{1,})*" ."\.([a-z]{2,}){1}$"; if(!eregi($regex,$subemail)){ $form->setError($field, "* Email invalid"); } $subemail = stripslashes($subemail); } this is what i have so far to check if its a valid email.

  Read the article

• Creating a network link between 2 very close buildings

  - by Daniel Johnson

  I have a charity who have two adjacent medium sized modern detached houses (in the UK): the buildings stand next to each other and are less than 5 metres apart. They have DSL connected to a single computer in one of the buildings. They want to add a network with wireless, and want it to work across both buildings. Being a charity they need to keep costs down. The network would be used for sharing Word documents, e-mail, browsing and skyping. My initial thoughts were to connect the buildings with fibre. So: Option 1 Use fibre between the buildings. Sufficient cable and two TP-LINK MC100CM Fast Ethernet Media Converters. Cost ~£80.00. But there is the extra cost and hassle of running the cable down and up the external walls, lifting and relaying paving, and burying underground. Never having fitted fibre I'm also a little worried about going up the wall and then bending the cable at 90 degrees to go through the wall and into the building. Option 2 Use two TP-Link TL-WA7510N High Powered Outdoor 5Ghz 15dBi Wireless antennas to connect the buildings. There is a clear line of sight at first floor level. Cost ~£100. And much easier to fit than fibre! Is using the TL-WA7510Ns overkill? Is there something more suitable? I had hoped to use some Netgear stuff, e.g. two DGN2200, one in each house and also use them to provide the wireless link between the buildings. However, in bridge mode wireless client association is not available and repeater mode with client association only supports WEP security which isn't strong enough. Is there something similar that would be up to the job? Option 3 Connect the buildings with UTP cable. My concerns here are risk of electric shock due to a difference of potential between the buildings (or are they so close this shouldn't be an issue) and protection from lightning strikes. Is fitting lighting arrestors expensive? And what can be done to ameliorate against the risk of shock? This all falls outside my area of expertise so I would really appreciate some advice.

  Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >