Search Results

Search found 5387 results on 216 pages for 'dns sd'.

Page 127/216 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

• ASA 5505 stops local internet when connected to VPN

  - by g18c

  Hi I have a Cisco ASA router running firmware 8.2(5) which hosts an internal LAN on 192.168.30.0/24. I have used the VPN Wizard to setup L2TP access and I can connect in fine from a Windows box and can ping hosts behind the VPN router. However, when connected to the VPN I can no longer ping out to my internet or browse web pages. I would like to be able to access the VPN, and also browse the internet at the same time - I understand this is called split tunneling (have ticked the setting in the wizard but to no effect) and if so how do I do this? Alternatively, if split tunneling is a pain to setup, then making the connected VPN client have internet access from the ASA WAN IP would be OK. Thanks, Chris names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.30.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address 208.74.158.58 255.255.255.252 ! ftp mode passive access-list inside_nat0_outbound extended permit ip any 10.10.10.0 255.255.255.128 access-list inside_nat0_outbound extended permit ip 192.168.30.0 255.255.255.0 192.168.30.192 255.255.255.192 access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.30.0 255.255.255.0 access-list DefaultRAGroup_splitTunnelAcl_1 standard permit 192.168.30.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool LANVPNPOOL 192.168.30.220-192.168.30.249 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 192.168.30.0 255.255.255.0 route outside 0.0.0.0 0.0.0.0 208.74.158.57 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.30.0 255.255.255.0 inside snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 TRANS_ESP_3DES_SHA crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.30.3 vpn-tunnel-protocol l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value DefaultRAGroup_splitTunnelAcl_1 username user password Cj7W5X7wERleAewO8ENYtg== nt-encrypted privilege 0 tunnel-group DefaultRAGroup general-attributes address-pool LANVPNPOOL default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global prompt hostname context : end

  Read the article

• Cisco 678 Will Not Work using PPPoE - Possibly Because I Configured it Incorrectly..?

  - by Brian Stinar

  I am attempting to configure a Cisco 678 because I am totally sick on my Actiontec. However, I am running into some problems. It seems as though the Cisco is able to train the line, but I am unable to ping out. I am all right at programming, but still learning a lot when it comes to being a system administrator. I apologize in advance if I did something ridiculous, or am attempting to configure this device to do something it was not designed to do. It is almost like I am not correctly configuring the device to grab it's IP using PPPoA (like my Actiontec.) The output from "show running" (below) makes me think this too. Below are the commands I ran in order to configure this: # en # set nvram erase # write # reboot # en # set nat enable # set dhcp server enable # set PPP wan0-0 ipcp 0.0.0.0 # set ppp wan0-0 dns 0.0.0.0 # set PPP wan0-0 login xxxxx // My actual login # set PPP wan0-0 password yyyyy // My actual password # set PPP restart enabled # set int wan0-0 close # set int wan0-0 vpi 0 # set int wan0-0 vci 32 # set int wan0-0 open # write # reboot Here is the output from a few commands I thought could provide some useful information: cbos#ping 74.125.224.113 Sending 1 8 byte ping(s) to 74.125.224.113 every 2 second(s) Request timed out cbos#show version Cisco Broadband Operating System CBOS (tm) 678 Software (C678-I-M), Version v2.4.9 - Release Software Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Nov 17 2004 15:26:29 DMT FULL firmware version G96 NVRAM image at 0x1030f000 cbos#show errors - Current Error Messages - ## Ticks Module Level Message 0 000:00:00:00 PPP Info IPCP Open Event on wan0-0 1 000:00:00:14 ATM Info Wan0 Up 2 000:00:00:14 PPP Info PPP Up Event on wan0-0 3 000:00:01:54 PPP Info PPP Down Event on wan0-0 Total Number of Error Messages: 4 cbos#show interface wan0 wan0 ADSL Physical Port Line Trained Actual Configuration: Overhead Framing: 3 Trellis Coding: Enabled Standard Compliance: T1.413 Downstream Data Rate: 1184 Kbps Upstream Data Rate: 928 Kbps Interleave S Downstream: 4 Interleave D Downstream: 16 Interleave R Downstream: 16 Interleave S Upstream: 4 Interleave D Upstream: 8 Interleave R Upstream: 16 Modem Microcode: G96 DSP version: 0 Operating State: Showtime/Data Mode Configured: Echo Cancellation: Disabled Overhead Framing: 3 Coding Gain: Auto TX Power Attenuation: 0dB Trellis Coding: Enabled Bit Swapping: Disabled Standard Compliance: T1.413 Remote Standard Compliance: T1.413 Tx Start Bin: 0x6 Tx End Bin: 0x1f Data Interface: Utopia L1 Status: Local SNR Margin: 19.0dB Local Coding Gain: 7.5dB Local Transmit Power: 12.5dB Local Attenuation: 46.0dB Remote Attenuation: 31.0dB Local Counters: Interleaved RS Corrected Bytes: 0 Interleaved Symbols with CRC Errors: 2 No Cell Delineation Interleaved: 0 Out of Cell Delineation Interleaved: 0 Header Error Check Counter Interleaved: 0 Count of Severely Errored Frames: 0 Count of Loss of Signal Frames: 0 Remote Counters: Interleaved RS Corrected Bytes: 0 Interleaved Symbols with CRC Errors: 1 No Cell Delineation Interleaved: 0 Header Error Check Counter Interleaved: 0 Count of Severely Errored Frames: 0 Count of Loss of Signal Frames: 0 cbos#show int wan0-0 WAN0-0 ATM Logical Port PVC (VPI 0, VCI 32) is configured. ScalaRate set to Auto AAL 5 UBR Traffic IP Port Enabled cbos#show running Warning: traffic may pause while NVRAM is being accessed [[ CBOS = Section Start ]] NSOS MD5 Enable Password = XXXX NSOS MD5 Root Password = XXXX NSOS MD5 Commander Password = XXXX [[ PPP Device Driver = Section Start ]] PPP Port User Name = 00, "XXXX" PPP Port User Password = 00, XXXX PPP Port Option = 00, IPCP,IP Address,3,Auto,Negotiation Not Required,Negotiable ,IP,0.0.0.0 PPP Port Option = 00, IPCP,Primary DNS Server,129,Auto,Negotiation Not Required, Negotiable,IP,0.0.0.0 PPP Port Option = 00, IPCP,Secondary DNS Server,131,Auto,Negotiation Not Require d,Negotiable,IP,0.0.0.0 [[ ATM WAN Device Driver = Section Start ]] ATM WAN Virtual Connection Parms = 00, 0, 32, 0 [[ DHCP = Section Start ]] DHCP Server = enabled [[ IP Routing = Section Start ]] IP NAT = enabled [[ WEB = Section Start ]] WEB = enabled cbos# wtf...? Thank you all very much for taking the time to read this, and the help.

  Read the article

• Forwarding rsyslog to syslog-ng, with FQDN and facility separation

  - by Joshua Miller

  I'm attempting to configure my rsyslog clients to forward messages to my syslog-ng log repository systems. Forwarding messages works "out of the box", but my clients are logging short names, not FQDNs. As a result the messages on the syslog repo use short names as well, which is a problem because one can't determine which system the message originated from easily. My clients get their names through DHCP / DNS. I've tried a number of solutions trying to get this working, but without success. I'm using rsyslog 4.6.2 and syslog-ng 3.2.5. I've tried setting $PreserveFQDN on as the first directive in /etc/rsyslog.conf (and restarting rsyslog of course). It seems to have no effect. hostname --fqdn on the client returns the proper FQDN, so the problem isn't whether the system can actually figure out its own FQDN. $LocalHostName <fqdn> looked promising, but this directive isn't available in my version of rsyslog (Available since 4.7.4+, 5.7.3+, 6.1.3+). Upgrading isn't an option at the moment. Configuring the syslog-ng server to populate names based on reverse lookups via DNS isn't an option. There are complexities with reverse DNS and the public cloud. Specifying for the forwarder to use a custom template seems like a viable option at first glance. I can specify the following, which causes local logging to begin using the FQDN on the syslog-ng repo. $template MyTemplate, "%timestamp% <FQDN> %syslogtag%%msg%" $ActionForwardDefaultTemplate MyTemplate However, when I put this in place syslog-ng seems to be unable to categorize messages by facility or priority. Messages come in as FQDN, but everything is put in to user.log. When I don't use the custom template, messages are properly categorized under facility and priority, but with the short name. So, in summary, if I manually trick rsyslog into including the FQDN, priority and facility becomes lost details to syslog-ng. How can I get rsyslog to do FQDN logging which works properly going to a syslog-ng repository? rsyslog client config: $ModLoad imuxsock.so # provides support for local system logging (e.g. via logger command) $ModLoad imklog.so # provides kernel logging support (previously done by rklogd) $ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat *.info;mail.none;authpriv.none;cron.none /var/log/messages authpriv.* /var/log/secure mail.* -/var/log/maillog cron.* /var/log/cron *.emerg * uucp,news.crit /var/log/spooler local7.* /var/log/boot.log $WorkDirectory /var/spool/rsyslog # where to place spool files $ActionQueueFileName fwdRule1 # unique name prefix for spool files $ActionQueueMaxDiskSpace 1g # 1gb space limit (use as much as possible) $ActionQueueSaveOnShutdown on # save messages to disk on shutdown $ActionQueueType LinkedList # run asynchronously $ActionResumeRetryCount -1 # infinite retries if host is down *.* @syslog-ng1.example.com *.* @syslog-ng2.example.com syslog-ng configuration (abridged for brevity): options { flush_lines (0); time_reopen (10); log_fifo_size (1000); long_hostnames (off); use_dns (no); use_fqdn (yes); create_dirs (no); keep_hostname (yes); }; source src { unix-stream("/dev/log"); internal(); udp(ip(0.0.0.0) port(514)); }; destination per_host_destination { file( "/var/log/syslog-ng/devices/$HOST/$FACILITY.log" owner("root") group("root") perm(0644) dir_owner(root) dir_group(root) dir_perm(0775) create_dirs(yes)); }; log { source(src); destination(per_facility_destination); };

  Read the article

• Configuring a PIX 506e for Asterisk

  - by orthogonal3

  Hi all! I'm having problems configuring a old Cisco PIX running 6.3 and wondered if anyone can lend a hand? Simply put I have a PIX 506e that I want to put in my VoIP data path. I can't update it and getting a compat version of Java for that version of PIX is tough so I can't log onto the web interface. The PIX straddles two networks..... 192.168.5.0 on the inside, ...50.0 on the outside both net masks are 255.255.255.0 I have a local Asterisk server cluster with a single service IP (<local asterisk>) SIP is on UDP 5060 and RTP (for the voip data) is on UDP 18000-18999 I know thats a big range but hey may as well. I need the 192.168.5.0 net to have web and ftp access for updates and the like. DHCP, DNS and NTP is already provided on that network so I don't need external DNS access. So I think I want the following rules: SIP or RTP from <my itsp> arriving at <outside voip ip> NATed to <local asterisk> SIP or RTP able to do the reverse route (should be covered by high sec - low sec??) HTTP and FTP access outbound for software update for the servers etc I have the following config at the minute - and I think I'm almost there (I hope)... interface ethernet0 auto interface ethernet1 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password wouldyouliketobeapeppertoo encrypted passwd wouldyouliketobeapeppertoo encrypted hostname afirewall domain-name adomain fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 access-list acl_ping permit icmp any any access-list voip permit ip host <my itsp> host <local asterisk> mtu outside 1500 mtu inside 1500 ip address outside <outside pix ip> 255.255.255.0 ip address inside <inside pix ip> 255.255.255.0 arp timeout 14400 global (outside) 1 <outside generic ip> nat (inside) 1 192.168.5.0 255.255.255.0 0 0 static (inside,outside) <outside voip ip> <local asterisk> netmask 255.255.255.255 0 0 static (outside,inside) <local asterisk> <outside voip ip> netmask 255.255.255.255 0 0 access-group acl_ping in interface outside access-group acl_ping in interface inside route outside 0.0.0.0 0.0.0.0 <my next hop router> 1 route outside <my itsp> 255.255.255.255 <my next hop router> 1 I think I just need a hand with the access-lists and NAT/static rules. Would anyone be able to help as I've RTFM'd the Cisco docs a few times and they're heavy. Wishing I'd completed my CCNA now! Thanks all for any help, Phil

  Read the article

• SQL Server 2000 and SSL Encryption

  - by Angry_IT_Guru

  We are a datacenter that hsots a SQL Server 2000 environment which provides database services for a product we sell that is loaded as a rich-client applicatin at each of our many clients and their workstations. Currently today, the application uses straight ODBC connections from the client site to our datacenter. We need to begin encrypting the credentials -- since everything is clear-text today and the authentication is weakly encrypted -- and I'm trying to determine the best way to implement SSL on the server with minimizing the impact of the client. A few things, however: 1) We have our own Windows domain and all our servers are joined to our private domain. Our clietns no nothing of our domain. 2) Typically, our clients connect to our datacenter servers either by: a) Using TCP/IP address b) Using a DNS name that we publish via internet, zone transfers from our DNS servers to our customers, or the client can add static HOSTS entries. 3) From what I understand from enabling encryption is that I can go to the Network Utility and select the "encryption" option for the protocol that I wish to encrypt. Such as TCP/IP. 4) When the encryption option is selected, I have a choice of installing a third-party certificate or a self-signed. I have tested the self-signed, but do have potential issues. I'll explain in a bit. If I go with a third-party cert, such as Verisign, or Network solutions... what kind of certificate do I request? These aren't IIS certificates? When I go create a self-signed via Microsoft's certificate server, I have to select "Authentication certificate". What does this translate to in the third-party world? 5) If I create a self-signed certificate, I understand that the "issue to" name has to match the FQDN for the server that is running SQL. In my case, I have to use my private domain name. If I use this, what does this do for my clients when trying to connect to my SQL Server? Surely they cannot resolve my private DNS names on their network.... I've also verified that when the self-signed certificate is installed, it has to be in the local personal store for the user account that is running SQL Server. SQL Server will only start if the FQDN matches the "issue to" of the certificate and SQL is running under the account that has the certificate installed. If I use a self-signed certificate, does this mean I have to have every one of my clients install it to verify? 6) If I used a third-party certificate, which sounds like the best option, do all my clients have to have internet access when accessing my private servers of their private WAN connection to use to verify the certificate? What do I do about the FQDN? It sounds like they have to use my private domain name -- which is not published -- and can no longer use the one that I setup for them to use? 7) I plan on upgrading to SQL 2000 soon. Is setup of SSL any easier/better with SQL 2005 than SQL 2000? Any help or guiadance would be appreciated

  Read the article

• KVM with one host IP and a different subnet for machines

  - by Jguy

  I've already setup a KVM host with proper IP configurations, but my host had me create DHCP and use that to assign the IP's to the machines. I want to see if there's an easier way to do it (or better). Upon my first setting out on this, I didn't find anything that pointed me in the right direction. I'm coming off a fresh install of Debian 6.0 x64, so I have nothing installed. I've logged in, queried for the below information and changed the password from my host set one. I have a Debian 6.0 x64 system with the following initial network configuration (substituted 255 in place of my real first octave): # tail /etc/network/interfaces auto eth0 iface eth0 inet static address 255.9.24.80 broadcast 255.9.24.95 netmask 255.255.255.224 gateway 255.9.24.65 # default route to access subnet up route add -net 255.9.24.64 netmask 255.255.255.224 gw 255.9.24.65 eth0 I have a /29 subnet that I want the virtual machines to use from my host: IP: 255.46.187.152 /29 Mask: 255.255.255.248 Broadcast: 255.46.187.159 Usable IP addresses: 255.46.187.153 to 255.46.187.158 I like the interface of Cloudmin, so I want to try and use that if I can to administrate my guests. So, my questions: How do I set this up on the host system the best so that I can use the additional Subnet IP's on the guests and have them accessible from the internet? I also need to host a DNS server, which means one of these VM's has to have two IP's assigned to it and accessable from the outside world. How can I do that using Cloudmin? I had a question about this here: Multiple IP addresses assigned to one KVM VM But I just reformatted the entire server and am trying to figure out a better way of doing this. Machine information: # ip route show 255.9.24.64/27 via 255.9.24.65 dev eth0 255.9.24.64/27 dev eth0 proto kernel scope link src 255.9.24.80 default via 255.9.24.65 dev eth0 brctl is empty # ip addr list 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether c8:60:00:54:b5:d8 brd ff:ff:ff:ff:ff:ff inet 255.9.24.80/27 brd 255.9.24.95 scope global eth0 inet6 fe80::ca60:ff:fe54:b5d8/64 scope link valid_lft forever preferred_lft forever Thank you for any help you can provide me. EDIT: I've installed kvm and cloudmin: aptitude install qemu-kvm libvirt-bin wget http://cloudmin.virtualmin.com/gpl/scripts/cloudmin-kvm-debian-install.sh ./cloudmin-kvm-debian-install.sh Rebooted and now my network configuration looks like this: # device: eth0 iface eth0 inet manual # default route to access subnet iface br0 inet static address 255.9.24.80 netmask 255.255.255.224 broadcast 255.9.24.95 network 255.9.24.64 bridge_ports eth0 gateway 255.9.24.65 I setup in Cloudmin the Start IP as 255.46.187.153 and End IP as 255.46.187.158. The CIDR is 29 and the gateway is 255.46.187.152. I've installed a guest with ubuntuserver 12.04 x64, which was able to get and retrieve internet resources during installation, but now cannot reach anything nor can it be reached from anything. Its network configuration is: iface eth0 inet static address 255.46.187.153 netmask 255.255.255.224 broadcast 255.46.187.159 gateway 255.46.187.152 dns-nameservers <host provided nameservers> And is not able to ping google.com through DNS or direct IP, I can't ping the VM from the outside or the host. any ideas now?

  Read the article

• Managing media using the Android MediaStore

  - by hgpc

  I manage the media (images, sound) of my app directly, reading and saving to the SD card. Should I be using the MediaStore instead? I'm not quite sure what the MediaStore is for, and the javadoc is not very helpful. When should an app use the MediaStore?

  Read the article

• Easiest way to export a route stored in a SQLite database to a file so it can be imported to a Googl

  - by LordSnoutimus

  Hello, I have created an application that records a series of longitude and latitude values in a SQLite database and display them as a coloured track on a MapActivity. I now want to be able to export this data somehow (preferably to a file) so a user can upload the values to a website showing a Google Map API. My question is: what would be the quickest way to export the data (and in what file format: GPX, XML, CSV) to the SD card located on the Android device. Many thanks.

  Read the article

• Android - Attempt to write in a readonly database when I open it readonly

  - by DLock

  i don't understand this at all. I try to open a db located in my SD card this way: db = SQLiteDatabase.openDatabase(myPath, null, SQLiteDatabase.NO_LOCALIZED_COLLATORS | SQLiteDatabase.OPEN_READONLY); But in that very line it throws this exception: android.database.sqlite.SQLiteException: attempt to write a readonly database It doesen't happen in my other devices, just this one that has android 2.3.3

  Read the article

• How do I create a scheduled task, via command line, which includes advanced options

  - by David

  I'm trying to create a scheduled task (in WinXP) which runs every 10 minutes, starting at 16:00:00 to 06:00:00, daily, from the command line. Currently, I can create a scheduled task which runs every 10 minutes, starting at 16:00:00, daily, by using the following command: SCHTASKS.EXE /CREATE /SC MINUTE /MO 10 /TN "Scheduled task name" /ST 16:00:00 /SD 01/01/2000 /TR task.bat /RU SYSTEM The question is, how do I modify the previous command so that it stops running at 06:00:00?

  Read the article

• android - using resources drawable in content provider

  - by Russ Wheeler

  I am trying to pass back an image through a content provider in a separate app. I have two apps, one with the activity in (app a), the other with content provider (app b) I have app a reading an image off my SD card via app b using the following code. App a: public void but_update(View view) { ContentResolver resolver = getContentResolver(); Uri uri = Uri.parse("content://com.jash.cp_source_two.provider/note/1"); InputStream inStream = null; try { inStream = resolver.openInputStream(uri); Bitmap bitmap = BitmapFactory.decodeStream(inStream); image = (ImageView) findViewById(R.id.imageView1); image.setImageBitmap(bitmap); } catch(FileNotFoundException e) { Toast.makeText(getBaseContext(), "error = "+e, Toast.LENGTH_LONG).show(); } finally { if (inStream != null) { try { inStream.close(); } catch (IOException e) { Log.e("test", "could not close stream", e); } } } }; App b: @Override public ParcelFileDescriptor openFile(Uri uri, String mode) throws FileNotFoundException { try { File path = new File(Environment.getExternalStorageDirectory().getAbsolutePath(),"pic2.png"); return ParcelFileDescriptor.open(path,ParcelFileDescriptor.MODE_READ_ONLY); } catch (FileNotFoundException e) { Log.i("r", "File not found"); throw new FileNotFoundException(); } } In app a I am able to display an image from app a's resources folder, using setImageURi and constructing a URI using the following code. int id = R.drawable.a2; Resources resources = getBaseContext().getResources(); Uri uri = Uri.parse(ContentResolver.SCHEME_ANDROID_RESOURCE + "://" + resources.getResourcePackageName(id) + '/' + resources.getResourceTypeName(id) + '/' + resources.getResourceEntryName(id) ); image = (ImageView) findViewById(R.id.imageView1); image.setImageURI(uri); However, if I try to do the same in app b (read from app b's resources folder rather than the image on the SD card) it doesn't work, saying it can't find the file, even though I am creating the path of the file from the resource, so it is definitely there. Any ideas? Does it restrict sending resources over the content provider somehow? P.S. I also got an error when I tried to create the file with File path = new File(uri); saying 'there is no applicable constructor to '(android.net.Uri)' though http://developer.android.com/reference/java/io/File.html#File(java.net.URI) Seems to think it's possible...unless java.net.URI is different to android.net.URI, in which case can I convert them? Thanks Russ

  Read the article

• No space left on Android Emulator

  - by Tom

  I have been developing my app for around two months, in the last week i have started getting the following error when trying to compile and run the app from Eclipse: java.io.IOException: Unable to upload file: No space left on device The APK comes out at 3.6Mb and the emulator is a recently created fresh one with 512Mb SD card and other specs identical to the G1. Can anyone suggest a reason this might be happening?

  Read the article

• My schtasks don't schedule anything. :(

  - by Waffles

  I'm trying to make a scheduled task, and its just not working for me. This is the command I type in CMD: schtasks /create /sc minute /mo 1 /tn test /tr calc.exe /st 19:17:00 /sd 12/14/2009 I'm trying to tell the computer to run calculator every minute starting at 7:09 PM. Although I get a success message after I type this in and hit enter, nothing happens at 7:09. What gives? Thanks in advance.

  Read the article

• java.net.URISyntaxException

  - by aayushi soni

  Hi, I have get this exception. but this exception is not reproduced again. I want to get the cause of this Exception Caught while Checking tag in XMLjava.net.URISyntaxException: Illegal character in opaque part at index 2: C:\Documents and Settings\All Users\.SF\config\sd.xml stacktrace net.sf.saxon.trans.XPathException. Why this exception occured. How to deal with so it will not reproduce.

  Read the article

• How can I programatically add an item to this dialog?

  - by George Edison

  When I insert an SD card, Windows XP/Vista/7 presents a dialog asking the user what they want to do with the contents. How can I add an item to this list for only certain types of data? (Like photos, music, etc.)

  Read the article

• Provisioning api jpa

  - by user268515

  Hi i tried the following code Appsprovisioning.java public void calluser() throws AppsForYourDomainExceptiion IOException, { for(UserEntry userEntry : retrieveAllUsers().getEntries()) { m[x]= userEntry.getTitle().getPlainText(); x++; } try { for(int i=0;i<x;i++) { String sd=m[i]; stud greeting1 = new stud(sd); em.persist(greeting1); System.out.println("jk"); } } finally { em.close(); } public UserFeed retrieveAllUsers()throws ,ServiceException, IOException{ userService = new UserService("Myapplication"); userService.setUserCredentials("[email protected]","xxxxxxxx"); URL retrieveUrl = new URL("https://www.google.com/a/feeds/montfortperungudi.edu.in/user/2.0/"); UserFeed allUsers = new UserFeed(); UserFeed currentPage; Link nextLink; do { currentPage = userService.getFeed(retrieveUrl, UserFeed.class); allUsers.getEntries().addAll(currentPage.getEntries()); nextLink = currentPage.getLink(Link.Rel.NEXT, Link.Type.ATOM); if (nextLink != null) { retrieveUrl = new URL(nextLink.getHref()); } } while (nextLink != null); return allUsers; } } Servlet.java public class servlet extends HttpServlet { private static final long serialVersionUID = 1L; private static final Logger log = Logger.getLogger(servlet.class.getName()); // EntityManager em=null; AppsProvisioning aa=new AppsProvisioning(); public void doGet(HttpServletRequest req, HttpServletResponse resp)throws IOException { //em = EMFService.get().createEntityManager(); try { aa.calluser(); }catch(Exception e){ System.out.println("SEF "+e);} finally { // em.clear(); // em.close(); } } } Table Creation import javax.persistence.Entity; import javax.persistence.Id; @Entity(name="stud") public class stud { @Id private String fathername; public stud(String fathername) {// TODO Auto-generated constructor stub this.fathername=fathername; } public void setFathername(String fathername) { this.fathername = fathername; } public String getFathername() { return fathername; } } I cant able to store all the users in the table.. Its returning Session out error.

  Read the article

• Stop MediaScanner scanning of certain directory

  - by kape123

  Is there a way to notify MediaScanner service on Android platform not to scan certain directories? I have application that encrypts images on SD card and after I do that MediaScanner goes wild in LogCat (writing out "not JPEG" exception... and there are time I have over 1000 pics in directory). Thanks

  Read the article

• Know if the client has terminated while using sockets in C..

  - by shadyabhi

  Suppose, I have a connected socket after writing this code.. if ((sd = accept(socket_d, (struct sockaddr *)&client_addr, &alen)) < 0) { perror("accept failed\n"); exit(1); } How can I know at the server side that client has exited.

  Read the article

• Unique partition ID

  - by BlueMan

  I'm looking for same way to get an unique ID of every partition in Win OS. Also for flash drives (SD cards, pendrives, etc.) connected to PC. I think that after formatting they get an unique ID - like MAC, right? Also I want to get other information of that partition - it's name, file system, size, etc.

  Read the article

• Expanding the size of an Android Virtual Device (emulator) instance?

  - by fiXedd

  On a relatively new emulator image (AVD) I have about 40mb of free space. How can I expand this? UPDATE: Just to be clear... I'm talking about the "Internal phone storage" size, not the SD Card size.

  Read the article

• Easiest way to export longitude and latitude data stored in a SQLite database to a file so it can be

  - by LordSnoutimus

  Hello, I have created an application that records a series of longitude and latitude values in a SQLite database and display them as a coloured track on a MapActivity. I now want to be able to export this data somehow (preferably to a file) so a user can upload the values to a website showing a Google Map API. My question is: what would be the quickest way to export the data (and in what file format: GPX, XML, CSV) to the SD card located on the Android device. Many thanks.

  Read the article

• How to setup Hessian Kit in iPhone existing projects

  - by Shikhar

  Hello Can any one help me to find out, how I can setup Hessian Kit on existing iPhone project. What are the steps required to run a simple hello world program. I have Hessian Kit (http://sourceforge.net/projects/hessiankit/) but don't know how I can include this in my existing project. Please help Thanks SD

  Read the article

• Discoverability of bluetooth device during Inquiry

  - by Rohit

  On my device bluetooth properties give System.getProperty("bluetooth.sd.trans.max"); as 1. It is not found by other device while it is making an inquiry itself. I want to my device to be discoverable while its doing inquiry. Is this possible ? Thanks in advance.

  Read the article

• When using SQL Compact on Windows Mobile, do you store the sdf file on a storage card?

  - by Michal Drozdowicz

  Having had some Sql Compact db corruption issues in the past and gone through the article on these, I got the idea that storing the database sdf file on a storage card significantly increases the risk of data loss due to db corruption. Do you store the sdf file on a storage card? Have you had any issues caused by it? What should I pay attention to when recommending a particular brand or model of an SD card wrt the stability and security for use with SQL Compact?

  Read the article

• in R, question about generate table

  - by alex

  a = matrix(1:25,5,5) B = capture.output(for (X in 1:5){ A = c(min(a[,X]),quantile(a[,X],0.25),median(a[,X]),quantile(a[,X],0.75),max(a[,X]),mean(a[,X]),sd(a[,X])/m^(1/2),var(a[,X])) cat(A,"\n") }) matrix(B,8,5) what i was trying to do is to generate a table which each column has those element in A and in that order. i try to use the matrix, but seems like it dont reli work here...can anyone help 1 2 3 4 5 min 1st quartile median SEM VAR THIS IS WHAT I WANT THE TABLE LOOKS LIKE ..

  Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >