Search Results

Search found 5325 results on 213 pages for 'huffman encoding'.

Page 127/213 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

• MPEG-2 playback inconsistent

  - by DustByte

  Many years ago I gave up on Linux because video playback was choppy. Now I'm back, and video playback is still playing up... I have two MPEG files: good.mpg bad.mpg. Here is some information about the two files, using avprobe: My machine is Intel Core 2 Duo E8400 @ 3.00GHz x 2, 64-bit. I do not know what graphics card I have. I run Ubuntu 12.04. So far I have had no problems with YouTube and playback of various video files, including playback of the file good.mpg, included in the avprobe snapshot above. However, the file bad.mpg gives me headache! The file bad.mpg is produced by a respectable "Old-video-tapes-to-DVD" company. I converted over 10 Video-8 tapes to MPEG through them, and today I collected my hard drive containing the MPEG files. Unfortunately I have problem watching them! Here are some details: Using Totem Movie Player 3.0.1 works well for several seconds, then it gets choppy and the playback is not at all smooth. Also the player easily freezes for a while when trying to jump to another position in the file. Most strangely though, the total time is shown as 0:42 (42 seconds) instead of the true 00:39:11: The VLC media player is doing a better job. It shows the correct total length, but as soon as I jump in the video to a new position, it stalls. Playback also stalls after 30 seconds if I press play and leave it. Using Handbrake and choosing bad.mpg as the source, gives me: There is only one title to choose, and it is 6 min 53 seconds. I would have guessed the full 39 minutes of the video should have shown. Lastly, putting the file bad.mpg in Dropbox and viewing it on my iPad with the Dropbox app seems fine (disregard the lack of easy jumping forward due to real-time encoding when streaming it). My question is simple: What is going on?! Why do I have problem to play the MPEG-2 files I just paid good money for (the issue with bad.mpg applies to all files I had encoded)? Is it an issue with my particular Linux machine? The graphics card? But why has everything worked fine so far, and why does not the good.mpg file cause any problems?

  Read the article

• Deserialize inherited classes into the same list in XNA

  - by M0rgenstern

  I am writing a Gui for a game (for what else ...). Therefor I wrote a class GuiElement which has some serializeable fields. From this class I deflect a Class "Button" which has one serializeable field more. Furthermore, I have a Class GuiWindow, which is as well deflected from "GuiElement". An Object of this Class has a Field "HandledElements" of the type "List". To know the layout of the Menues, I use XML-Files, which look like that (for example): <?xml version="1.0" encoding="utf-8" ?> <XnaContent xmlns:Generic="System.Collections.Generic"> <Asset Type="System.Collections.Generic.List[GUI.GuiWindow]"> <Item> <Position>0 0</Position> <AlternativeImagePath></AlternativeImagePath> <IsActive>true</IsActive> <Name>MainMenu</Name> <HandledElements> <Item> <Position>100 100</Position> <AlternativeImagePath></AlternativeImagePath> <IsActive>true</IsActive> <Name>Optionen</Name> <Caption>Optionen</Caption> </Item> </HandledElements> </Item> <Item> <Position>0 0</Position> <AlternativeImagePath></AlternativeImagePath> <IsActive>false</IsActive> <Name>Options</Name> <HandledElements> </HandledElements> </Item> </Asset> </XnaContent> As you can see, the first window has in its "HandledElements" List an Item with the Field . This is a field which only a Button has. The Problem is now: I can't deserialize this XML file, because GuiElement does not have this Field, it only has the few fields above. I thought it would know automatically which Class to use,but it doesn't. Do I really have to give my windows a list for each child class of GuiElement? Or can I do another workaround?

  Read the article

• Export all SSIS packages from msdb using Powershell

  - by jamiet

  Have you ever wanted to dump all the SSIS packages stored in msdb out to files? Of course you have, who wouldn’t? Right? Well, at least one person does because this was the subject of a thread (save all ssis packages to file) on the SSIS forum earlier today. Some of you may have already figured out a way of doing this but for those that haven’t here is a nifty little script that will do it for you and it uses our favourite jack-of-all tools … Powershell!!   Imagine I have the following package folder structure on my Integration Services server (i.e. in [msdb]): There are two packages in there called “20110111 Chaining Expression components” & “Package”, I want to export those two packages into a folder structure that mirrors that in [msdb]. Here is the Powershell script that will do that:   Param($SQLInstance = "localhost") #####Add all the SQL goodies (including Invoke-Sqlcmd)##### add-pssnapin sqlserverprovidersnapin100 -ErrorAction SilentlyContinue add-pssnapin sqlservercmdletsnapin100 -ErrorAction SilentlyContinue cls $Packages = Invoke-Sqlcmd -MaxCharLength 10000000 -ServerInstance $SQLInstance -Query "WITH cte AS ( SELECT cast(foldername as varchar(max)) as folderpath, folderid FROM msdb..sysssispackagefolders WHERE parentfolderid = '00000000-0000-0000-0000-000000000000' UNION ALL SELECT cast(c.folderpath + '\' + f.foldername as varchar(max)), f.folderid FROM msdb..sysssispackagefolders f INNER JOIN cte c ON c.folderid = f.parentfolderid ) SELECT c.folderpath,p.name,CAST(CAST(packagedata AS VARBINARY(MAX)) AS VARCHAR(MAX)) as pkg FROM cte c INNER JOIN msdb..sysssispackages p ON c.folderid = p.folderid WHERE c.folderpath NOT LIKE 'Data Collector%'" Foreach ($pkg in $Packages) { $pkgName = $Pkg.name $folderPath = $Pkg.folderpath $fullfolderPath = "c:\temp\$folderPath\" if(!(test-path -path $fullfolderPath)) { mkdir $fullfolderPath | Out-Null } $pkg.pkg | Out-File -Force -encoding ascii -FilePath "$fullfolderPath\$pkgName.dtsx" }   To run it simply change the “localhost” parameter of the server you want to connect to either by editing the script or passing it in when the script is executed. It will create the folder structure in C:\Temp (which you can also easily change if you so wish – just edit the script accordingly). Here’s the folder structure that it created for me: Notice how it is a mirror of the folder structure in [msdb]. Hope this is useful! @Jamiet

  Read the article

• URL protocol handlers in basic Ubuntu Desktop

  - by Hibou57

  There was a way to register URL protocol handlers with Gconf, which is now obsolete and there seems to be no way to do the same with DConf (or Gsettings, its recommended wrapper). How do one properly register an URL protocol handlers since DConf? Additionally, something looks strange to me (as I don't understand it), on my Ubuntu 12.04 The protocol apt:// should be handled by the apturl command. It is so with my Opera browser, but only because I added this specific association using the browser's configuration facility. Otherwise, in the rest of the environment: Running xdg-open apt://foo.bar opens elinks (my www-browser alternative). Running gnome-open apt://foo.bar opens the Software?Center. Opening gcong-editor, I see a key /desktop/gnome/url-handlers/apt whose value is apturl "%s" and its enable. This configuration seems to be ignored, which is reasonably expected, as GConf is considered obsolete. Opening dconf-editor, I can't see anything related to URL handlers or protocols in /desktop/gnome It looks a bit messy to my eyes (just teasing with this wording, nothing bad) What's underneath? Side note: I'm looking for something which preferably works even when the full desktop environment is not loaded, like when running an i3wm session with only gsettings-daemon (and other stuffs unrelated to this case) is loaded. Update Another way to “register” a protocol handler is with *.desktop files and their MIME-Type; ex. MimeType=application/<the-protocol>;. I found a /usr/share/applications/ubuntu-software-center.desktop with this content: [Desktop Entry] Name=Ubuntu Software Center GenericName=Software Center Comment=Lets you choose from thousands of applications available for Ubuntu Exec=/usr/bin/software-center %u Icon=softwarecenter Terminal=false Type=Application Categories=PackageManager;GTK;System;Settings; MimeType=application/x-deb;application/x-debian-package;x-scheme-handler/apt; StartupNotify=true X-Ubuntu-Gettext-Domain=software-center Keywords=Sources;PPA;Install;Uninstall;Remove;Purchase;Catalogue;Store; This one explains why gnome-open apt://foo.bar opens the Software?Center instead of apturl. So I installed this apturl.desktop in ~/.local/share/applications: [Desktop Entry] Encoding=UTF-8 Version=1.0 Type=Application Terminal=false Exec=/usr/bin/apturl %u Name=APT-URL Comment=APT-URL handler Icon= Categories=Application;Network; MimeType=x-scheme-handler/apt; After update-desktop-database and even after rebooting, both xdg-open and gnome-open still do the same and ignore this user desktop file, which is usual, should override the other in /usr/share/applications/. May be there is something special with desktop files specifying x-scheme-handler MIME type and they are not handled the usual way. The desktop-file way does not answer the question.

  Read the article

• Should UTF-16 be considered harmful?

  - by Artyom

  I'm going to ask what is probably quite a controversial question: "Should one of the most popular encodings, UTF-16, be considered harmful?" Why do I ask this question? How many programmers are aware of the fact that UTF-16 is actually a variable length encoding? By this I mean that there are code points that, represented as surrogate pairs, take more than one element. I know; lots of applications, frameworks and APIs use UTF-16, such as Java's String, C#'s String, Win32 APIs, Qt GUI libraries, the ICU Unicode library, etc. However, with all of that, there are lots of basic bugs in the processing of characters out of BMP (characters that should be encoded using two UTF-16 elements). For example, try to edit one of these characters: 𝄞 (U+1D11E) MUSICAL SYMBOL G CLEF 𝕥 (U+1D565) MATHEMATICAL DOUBLE-STRUCK SMALL T 𝟶 (U+1D7F6) MATHEMATICAL MONOSPACE DIGIT ZERO 𠂊 (U+2008A) Han Character You may miss some, depending on what fonts you have installed. These characters are all outside of the BMP (Basic Multilingual Plane). If you cannot see these characters, you can also try looking at them in the Unicode Character reference. For example, try to create file names in Windows that include these characters; try to delete these characters with a "backspace" to see how they behave in different applications that use UTF-16. I did some tests and the results are quite bad: Opera has problem with editing them (delete required 2 presses on backspace) Notepad can't deal with them correctly (delete required 2 presses on backspace) File names editing in Window dialogs in broken (delete required 2 presses on backspace) All QT3 applications can't deal with them - show two empty squares instead of one symbol. Python encodes such characters incorrectly when used directly u'X'!=unicode('X','utf-16') on some platforms when X in character outside of BMP. Python 2.5 unicodedata fails to get properties on such characters when python compiled with UTF-16 Unicode strings. StackOverflow seems to remove these characters from the text if edited directly in as Unicode characters (these characters are shown using HTML Unicode escapes). WinForms TextBox may generate invalid string when limited with MaxLength. It seems that such bugs are extremely easy to find in many applications that use UTF-16. So... Do you think that UTF-16 should be considered harmful?

  Read the article

• gstreamer pulseaudio echo cancellation

  - by user3618055

  I'm implementing a voip application using gstreamer, i use the example of the rtp in the plugin-good! i want to implement echo cancellation, i couldn't use the speex echo canceller with gstreamer because the input and the output are not in the same process. So, i want to use pulse audio to make echo cancellation? can any one help me how to deal with? the sender voice is pipeline = gst_pipeline_new (NULL); g_assert (pipeline); /* the audio capture and format conversion */ audiosrc = gst_element_factory_make (pulsesrc, "audiosrc"); g_assert (audiosrc); audioconv = gst_element_factory_make ("audioconvert", "audioconv"); g_assert (audioconv); audiores = gst_element_factory_make ("audioresample", "audiores"); g_assert (audiores); /* the encoding and payloading */ audioenc = gst_element_factory_make (AUDIO_ENC, "audioenc"); g_assert (audioenc); audiopay = gst_element_factory_make (AUDIO_PAY, "audiopay"); g_assert (audiopay); /* add capture and payloading to the pipeline and link */ gst_bin_add_many (GST_BIN (pipeline), audiosrc, audioconv, audiores, audioenc, audiopay, NULL); if (!gst_element_link_many (audiosrc, audioconv, audiores, audioenc, audiopay, NULL)) { g_error ("Failed to link audiosrc, audioconv, audioresample, " "audio encoder and audio payloader"); } and the receiver is : gst_bin_add_many (GST_BIN (pipeline), rtpsrc, rtcpsrc, rtcpsink, NULL); /* the depayloading and decoding */ audiodepay = gst_element_factory_make (AUDIO_DEPAY, "audiodepay"); g_assert (audiodepay); audiodec = gst_element_factory_make (AUDIO_DEC, "audiodec"); g_assert (audiodec); /* the audio playback and format conversion */ audioconv = gst_element_factory_make ("audioconvert", "audioconv"); g_assert (audioconv); audiores = gst_element_factory_make ("audioresample", "audiores"); g_assert (audiores); audiosink = gst_element_factory_make (pulsesink, "audiosink"); g_assert (audiosink); /* add depayloading and playback to the pipeline and link */ gst_bin_add_many (GST_BIN (pipeline), audiodepay, audiodec, audioconv, audiores, audiosink, NULL); res = gst_element_link_many (audiodepay, audiodec, audioconv, audiores, audiosink, NULL); g_assert (res == TRUE); i tried to change gstreamer proprietes to pulseaudio server in input and output and i used "pactl load-module module-echo-cancel aec_method=adrian" but i still listen to echo!! any one could help please thanks!!

  Read the article

• How do I use IIS7 rewrite to redirect requests for (HTTP or HTTPS):// (www or no-www) .domainaliases.ext to HTTPS://maindomain.ext

  - by costax

  I have multiple domain names assigned to the same site and I want all possible access combinations redirected to one domain. In other words whether the visitor uses http://domainalias.ext or http://www.domainalias.ext or https://www.domainalias3.ext or https://domainalias4.ext or any other combination, including http://maindomain.ext, http://www.maindomain.ext, and https://www.maindomain.ext they are all redirected to https://maindomain.ext I currently use the following code to partially achieve my objectives: <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.webServer> <rewrite> <rules> <rule name="CanonicalHostNameRule" stopProcessing="true"> <match url="(.*)" /> <conditions> <add input="{HTTP_HOST}" pattern="^MAINDOMAIN\.EXT$" negate="true" /> </conditions> <action type="Redirect" redirectType="Permanent" url="https://MAINDOMAIN.EXT/{R:1}" /> </rule> <rule name="HTTP2HTTPS" stopProcessing="true"> <match url="(.*)" /> <conditions> <add input="{HTTPS}" pattern="off" ignoreCase="true" /> </conditions> <action type="Redirect" redirectType="Permanent" url="https://MAINDOMAIN.EXT/{R:1}" /> </rule> </rules> </rewrite> </system.webServer> </configuration> ...but it fails to work in all instances. It does not redirect to https://maindomain.ext when user inputs https://(www.)domainalias.ext So my question is, are there any programmers here familiar with IIS7 ReWrite that can help me modify my existing code to cover all possibilities and reroute all my domain aliases, loaded by themselves or using www in front, in HTTP or HTTPS mode, to my main domain in HTTPS format??? The logic would be: if entire URL does NOT start with https://maindomain.ext then REDIRECT to https://maindomain.ext/(plus_whatever_else_that_followed). Thank you very much for your attention and any help would be appreciated. NOTE TO MODS: If my question is not in the correct format, please edit or advise. Thanks in advance.

  Read the article

• Access denied 403 errors after migrating my site

  - by AgA

  I've recently migrated my Joomla site from one shared hosting to another with Hostgator. GWT notified me about many 403 access denied pages. I've checked with Firebug too, and even though browser is displaying full page correctly but http return is 403. I've checked the home page but it's correctly returing 200 response. The same is shown by Fetch as Google in GWT(pasted this in the bottom). The site is 3 years old and I regularly do such migrations. I've copied the files and database "AS IS". I've even cleared all the caches but no luck. There is only one change: previously the site was primary domain but now it's add-on one. What could be the issue? This is how Googlebot fetched the page. Fetch as Google URL: http://MYSITE.COM/-----------------REMOVED.html Date: Thursday, June 20, 2013 at 10:32:14 PM PDT Googlebot Type: Web Download Time (in milliseconds): 3899 HTTP/1.1 403 Forbidden Date: Fri, 21 Jun 2013 05:32:15 GMT Server: Apache P3P: CP="NOI ADM DEV PSAi COM NAV OUR OTRo STP IND DEM" Expires: Mon, 1 Jan 2001 00:00:00 GMT Cache-Control: post-check=0, pre-check=0 Pragma: no-cache Set-Cookie: 0e4f6b53991c80cf39d57a6db58bb58d=ee2d880e8db0f1fc03c5612ea5a77004; path=/ Last-Modified: Fri, 21 Jun 2013 05:32:19 GMT Keep-Alive: timeout=5, max=75 Connection: Keep-Alive Transfer-Encoding: chunked Content-Type: text/html; charset=utf-8 <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-gb" lang="en-gb" > <head> <base href="http://www.mysite.com/-----------------rajiv-yuva-shakthi-programme-finance-planning.html" /> <meta http-equiv="content-type" content="text/html; charset=utf-8" /> <meta name="robots" content="index, follow" /> <meta name="keywords" content="" /> <<<<<<TRIMMED>>>>>>>>>>>>>>

  Read the article

• what's wrong with my sitemap?

  - by cadrian

  Google Webmaster Tools says that my sitemap is in a wrong format. I don't see my mistake, I think I followed every guideline provided by Google. Can someone help me? <?xml version="1.0" encoding="UTF-8"?> <urlset xmlns="http://www.sitemaps.org/schemas/sitemap/0.9"> <url> <loc>http://www.vocalcontraste.fr/</loc> </url> <url> <loc>http://www.vocalcontraste.fr/presentation/</loc> <lastmod>2012-01-30T21:49:06+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/les-concerts/</loc> <lastmod>2012-12-13T21:55:00+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/ecoutez-contraste/</loc> <lastmod>2012-07-13T18:19:45+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/repertoire/</loc> <lastmod>2012-07-13T17:30:14+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/la-presse/</loc> <lastmod>2012-07-11T08:17:48+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/recrutement/</loc> <lastmod>2012-02-01T22:22:03+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/nos-partenaires/</loc> <lastmod>2012-07-11T07:43:31+01:00</lastmod> </url> <url> <loc>http://www.vocalcontraste.fr/contactez-nous/</loc> <lastmod>2012-02-02T19:01:32+01:00</lastmod> </url> </urlset>

  Read the article

• WebLogic Silent Install 11.1.1.4 (WLS 10.3.4)

  - by john.graves(at)oracle.com

  This is just a quick note to remind myself of how incredibly easy it is to install the base products without the aid of a mouse! Note to Windoze users: Why?!?!  I’m only showing Linux examples in this blog so I encourage you to just say NO to win-no-z  install.sh !/bin/bash ./wls1034_oepe111161_linux32.bin -mode=silent -silent_xml=./silent.xml silent.xml <?xml version="1.0" encoding="UTF-8"?> <bea-installer> <input-fields> <data-value name="BEAHOME" value="/opt/app/wls10.3.4" /> <data-value name="WLS_INSTALL_DIR" value="/opt/app/wls10.3.4/wlserver_10.3" /> </input-fields> </bea-installer> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Note about Oracle_Home: Since all products are moving to a common WLS base, I simply use the WLS version as my Oracle Home.  In this case wls10.3.4.  Also, I keep my user_projects outside my Oracle_Home directory to keep things clean.  I typically use /opt/app/user_projects or a variation of that.

  Read the article

• How should I land my next consulting gig? [closed]

  - by MrOodles

  For the last couple of years, I've been working on speculative projects, expanding my skillset with side work, and paying the bills while having a blast consulting for startups. However, for a number of personal reasons, I need to spend the next 6-9 months maximizing my cash income. I want to put this into effect starting in early August. So that means I have one month to put the necessary client list/portfolio/resume together to start making this happen. As a programmer, I am very proficient in building Django web apps. I can write the necessary SQL, python, javascript, and css to build every part of a Django app, and then do the system administration necessary to deploy on AWS using EC2. I can also rig up a CDN to work seemlessly with the app using S3 and Cloudfront. I have built GIS applications using GeoDjango and PostGIS, and I have constructed social video apps by implementing Encoding.com as a service to prepare raw video files for consumption on the web. I am also moderately proficient in programming PHP, Java, and C#. I have built web apps in PHP, and desktop apps in Java and C#. I have dabbled with Android applications and iPhone apps, but nothing I would show off. I have experience doing SEO, social media marketing, and content marketing. Many of my clients have needed their apps promoted after they were built, and I was always happy to oblige when I could. I have also worked with biometrics technology including fingerprints for government contractors. This was as much a business analyst role as it was a programming gig, as I had to help answer RFPs, make checklists, and work around reems and reems of regulations to build applications that met very large bureaucratic requirements. I only have two real requirements for my next gig(s): 1) Work remotely. I live in North East Ohio, and I don't plan on leaving, but I wouldn't mind traveling one or two weeks out of every month to service clients who need on-site help. 2) $60.00hr-$∞ USD contracting rate. So what should I do for the next 30 days to achieve this? Should I target some large company and learn the requisite buzzwords to impress them? Should I learn some new language or technology? Polish some skill that I already have? Should I build something using my current skillset, or with some new technology? Should I put a website for my consultancy together to market myself? Should I do that using latest technology x, y, and z? Or should I just slap something up on Tumblr? I'm willing to do anything (moral) over the next 4 weeks to put myself into a position to maximize my income, and I'm open to all and every idea Programmers users may have. Let me hear them.

  Read the article

• How to deal with MySQL Connector/ODBC error "Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock'"

  - by user12653020

  I am sure many users run into a mysterious problem when perfectly working ODBC configurations started failing with errors like: Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' The above error message might be preceded with something like [nxDc[yQ]. At the same time odbc.ini specifies in its DSN different SOCKET=/tmp/mysql.sock or a TCP connection SERVER=<remote_host_or_ip>. The question is, what had happened that the ODBC driver started to ignore the DSN options? The clue lies in the corrupted string [nxDc[yQ], which actually was [UnixODBC][MySQL] with each 2nd symbol removed. This is the case of bad conversion from SQLCHAR to SQLWCHAR. The UnixODBC driver manager took a single-byte character string from the client application and tried to convert it into the wide (multi-byte) characters for the Unicode version of MyODBC driver: Initially the piece of the connection string was represented by 1-byte chars like: [S][E][R][V][E][R][=][m][y][h][o][s][t][;] after the bad conversion to wide chars (commonly 2-byte UTF-16) [SE][RV][ER][=m][yh][os][t;] instead of [S\0][E\0][R\0][V\0][E\0][R\0][=\0][m\0][y\0][h\0][o\0][s\0][t\0][;\0] Naturally, the MyODBC driver could not parse the bad string and tried to use the default connection type (SOCKET) with the default value (/var/lib/mysql/mysql.sock) Now we know what happened, but why it happened? In most cases it happened because of using ODBCManageDataSourcesQ4 utility or its older analog ODBCConfig. When registering ODBC drivers they put lots of additional options and one of these options badly affects the UnixODBC driver manager itself. The solution is simple - remove or comment out the option in odbcinst.ini file (it is empty by default) set for the driver: [MySQL ODBC 5.2.6 Driver] Description    = Driver         = /home/dbs/myodbc526/lib/libmyodbc5w.so Driver64       = /home/dbs/myodbc526/lib/libmyodbc5w.so Setup          = /home/dbs/myodbc526/lib/libmyodbc5S.so Setup64        = /home/dbs/myodbc526/lib/libmyodbc5S.so UsageCount     = 1 CPTimeout      = 0 CPTimeToLive   = 0 IconvEncoding  =  # <--------- remove this line Trace          = TraceFile      = TraceLibrary   = After applying this simple solution (remove the line with IconvEncoding = ) everything came to normal. Prior to removing that line I tried putting different encoding names there, but the result was not good, so I really don't know how to properly use it. Unfortunately, UnixODBC manuals say nothing about it. Therefore, removing this option was the only way to get things done.

  Read the article

• How to generate SPMetal for a specific list (OOTB: like tasks or contacts) with custom columns

  - by KunaalKapoor

  SPMetal is used to make use of LINQ on a list in SharePoint 2010. By default when you generate SPMetal on a site you will get a code generated file for most of the lists and probably more. Here is a MSDN link for some info on SPMetal.http://msdn.microsoft.com/en-us/library/ee538255(office.14).aspxBut what if you want only to generate the code for one list?Well it is quite simple once you figure it out. You need to add an xml file to override the default settings of SPMetal and specify it in the /parameters option. I will show you how to do this.First create a Folder that will contain two files (GenerateSPMetalCode.bat and SPMetal.xml).Below is the content of the files:GenerateSPMetalCode.bat "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\SPMetal" /web:http://YourServer /code:OutPutFileName.cs /language:csharp /parameters:SPMetal.xml pause SPMetal.xml <?xml version="1.0" encoding="utf-8"?> <Web AccessModifier="Internal" xmlns="http://schemas.microsoft.com/SharePoint/2009/spmetal"> <List Name="ListName"> <ContentType Name="ContentTypeName" Class="GeneratedClassName" /> </List> <ExcludeOtherLists></ExcludeOtherLists> </Web> You will have to change some of the text in the files so that it will be specific to your SharePoint Server Setup. In the bat file you will have to change http://YourServer to the url of the web where your list is. In the SPMetal.xml file you need to change ListName to the name of your list and the ContentTypeName to the name of the content type you want to extract. The GeneratedClassName can be anything but perhaps you should rename it to something more sensible.Adding the following line: '<List Name="ListName"><ContentType Name="ContentTypeName" Class="GeneratedClassName" /> </List>'  makes sure that any custom columns added to an OOTB list like contacts or tasks are also generated, which are missed out in a regular generation.So now when you run it the SPMetal command will read the SPMetal.xml list and override its commands. ExcludeOtherLists element makes it so that only the code for the lists you specify will be generated. For some reason I got an error if I had this element above the List element.You sould now have a code file called OutPutFileName.cs that has been generated. You can now put this in your SharePoint project for use with your LINQ queries against that list.I will soon write a LINQ example that uses the generated class. UPDATE: Add the /namespace parameter to add a namespace to the generated code. "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\SPMetal" /web:http://YourServer /namespace:MySPMetalNameSpace /code:OutPutFileName.cs /language:csharp /parameters:SPMetal.xml

  Read the article

• Making CopySourceAsHtml add-on work with VS2010

  - by DigiMortal

  As there are still bloggers who use CopySourceAsHtml add-on for Visual Studio to get syntax highlighted code to their blog posts and there is no guidance in CSAH site how to make it work with Visual Studio 2010 I will give my guidance here. Almost all code in this blog is syntax highlighted by this add-on (read more from my post Visual Studio add-in: CopySourceAsHTML). Last version of CSAH is available for VS2008 but it is easy to make it work with VS2010. Just follow these steps. Close VS2010 if it is opened. Goto folder MyDocuments\Visual Studio 2010. Move to AddIns subfolder (create it if there is no such subfolder). Create file called CopySourceAsHtml.AddIn and open it in text editor. Paste the following XML to editor:   <?xml version="1.0" encoding="utf-8" standalone="no"?> <Extensibility xmlns="http://schemas.microsoft.com/AutomationExtensibility"> <HostApplication> <Name>Microsoft Visual Studio Macros</Name> <Version>10.0</Version> </HostApplication> <HostApplication> <Name>Microsoft Visual Studio</Name> <Version>10.0</Version> </HostApplication> <Addin> <FriendlyName>CopySourceAsHtml</FriendlyName> <Description>Adds support to Microsoft Visual Studio 2010 for copying source code, syntax highlighting, and line numbers as HTML.</Description> <Assembly>JTLeigh.Tools.Development.CopySourceAsHtml, Version=3.0.3215.1, Culture=neutral, PublicKeyToken=bb2a58bdc03d2e14, processorArchitecture=MSIL</Assembly> <FullClassName>JTLeigh.Tools.Development.CopySourceAsHtml.Connect</FullClassName> <LoadBehavior>1</LoadBehavior> <CommandPreload>0</CommandPreload> <CommandLineSafe>0</CommandLineSafe> </Addin> </Extensibility> Save file and close it. Run VS2010 and activate add-on if it is not activated yet. That’s it. If you are heavy user of CSAH then I recommend you to bookmark this post. :)

  Read the article

• A Simple Entity Tagger

  - by Elton Stoneman

  In the REST world, ETags are your gateway to performance boosts by letting clients cache responses. In the non-REST world, you may also want to add an ETag to an entity definition inside a traditional service contract – think of a scenario where a consumer persists its own representation of your entity, and wants to keep it in sync. Rather than load every entity by ID and check for changes, the consumer can send in a set of linked IDs and ETags, and you can return only the entities where the current ETag is different from the consumer’s version.  If your entity is a projection from various sources, you may not have a persistent ETag, so you need an efficient way to generate an ETag which is deterministic, so an entity with the same state always generates the same ETag. I have an implementation for a generic ETag generator on GitHub here: EntityTagger code sample. The essence is simple - we get the entity, serialize it and build a hash from the serialized value. Any changes to either the state or the structure of the entity will result in a different hash. To use it, just call SetETag, passing your populated object and a Func<> which acts as an accessor to the ETag property: EntityTagger.SetETag(user, x => x.ETag); The implementation is all in at 80 lines of code, which is all pretty straightforward: var eTagProperty = AsPropertyInfo(eTagPropertyAccessor); var originalETag = eTagProperty.GetValue(entity, null); try { ResetETag(entity, eTagPropertyAccessor); string json; var serializer = new DataContractJsonSerializer(entity.GetType()); using (var stream = new MemoryStream()) { serializer.WriteObject(stream, entity); json = Encoding.UTF8.GetString(stream.GetBuffer(), 0, (int)stream.Length); } var guid = GetDeterministicGuid(json); eTagProperty.SetValue(entity, guid.ToString(), null); //... There are a couple of helper methods to check if the object has changed since the ETag value was last set, and to reset the ETag. This implementation uses JSON to do the serializing rather than XML. Benefit - should be marginally more efficient as your hashing a much smaller serialized string; downside, JSON doesn't include namespaces or class names at the root level, so if you have two classes with the exact same structure but different names, then instances which have the same content will have the same ETag. You may want that behaviour, but change to use the XML DataContractSerializer if you think that will be an issue. If you can persist the ETag somewhere, it will save you server processing to load up the entity, but that will only apply to scenarios where you can reliably invalidate your ETag (e.g. if you control all the entry points where entity contents can be updated, then you can calculate and persist the new ETag with each update).

  Read the article

• Working with Windows and Unix

  - by user554629

  Beware of new line characters One of the most frequent issues we encounter in Tech Support is the corruption of files that are transferred between Windows and Unix.   The transfer can occur at any stage, but ultimately involves a transfer of a file using an ftp client that is running on Windows;  it could be ftp or filezilla. Windows uses two characters to mark the end of a line in a text file (CR/LF),carriage return, linefeed.   Unix uses a single character (CR). In all situations, it is best to use binary mode transfer for all files, including ascii text files. Common problems: upload a core file from unix to windows using ftp in ascii mode.The file is going to be larger on Windows than Unix.ftp doesn't know if this is a text file with real line-ends, it takes every ascii CR and transmits two ascii characters CR/LF.The core file, tar file, library ... will be corrupted when transferred to Oracle. download a shell script to Windows, and transfer it to Unix using ftpIf the file is edited on Windows, the unix script line-end chars will be doubled.Unix doesn't know how to handle that, and will likely tell you the script is not executable.Why?  The first line of a shell script ( called "sh-bang" ), identifies the command interpreter the unix shell should use for this script.   Common examples:#/bin/sh#/bin/ksh#/bin/bash#/bin/perl#/bin/sh^M    # will not be understood.#/bin/env ksh # special syntax.  Find ksh and run it dos2unix is a common utility found on most unix platforms, that repairs the issue of Windows LineEnd characters in unix script files.   I've written my own flavor of this utility for use in Tech Support and build environments, that is a bit easier to use, and has some nice side-effects. accepts a list of files:   dos2unix *.sh repairs the file in-place.  Doesn't generate a new file you have to name retains the same timestamp;  it is the encoding that changed, not the file content. Here are the versions of dos2unix for each of the environments we work in.They are compressed with gzip, to avoid the ftp ascii transfer trap,and because I am quite limited in the number of files I can upload to this blog. AIX Linux Solaris sparc  Windows 

  Read the article

• How can I combine my FTP queries? [migrated]

  - by ryansworld10

  My program has several times where it queries an FTP server to read and upload information. How can I combine all these into one FTP class to handle everything? private static void UploadToFTP(string[] FTPSettings) { try { FtpWebRequest request = (FtpWebRequest)WebRequest.Create(FTPSettings[0]); request.Method = WebRequestMethods.Ftp.MakeDirectory; request.Credentials = new NetworkCredential(FTPSettings[1], FTPSettings[2]); FtpWebResponse response = (FtpWebResponse)request.GetResponse(); } catch { } try { FtpWebRequest request = (FtpWebRequest)WebRequest.Create(FTPSettings[0] + Path.GetFileName(file)); request.Method = WebRequestMethods.Ftp.UploadFile; request.Credentials = new NetworkCredential(FTPSettings[1], FTPSettings[2]); StreamReader source = new StreamReader(file); byte[] fileContents = Encoding.UTF8.GetBytes(source.ReadToEnd()); source.Close(); request.ContentLength = fileContents.Length; Stream requestStream = request.GetRequestStream(); requestStream.Write(fileContents, 0, fileContents.Length); requestStream.Close(); FtpWebResponse response = (FtpWebResponse)request.GetResponse(); response.Close(); RegenLog(); } catch (Exception e) { File.AppendAllText(file, string.Format("{0}{0}Upload Failed - ({2}) - {1}{0}", nl, System.DateTime.Now, e.Message.ToString())); } } private static void CheckBlacklist(string[] FTPSettings) { try { FtpWebRequest request = (FtpWebRequest)WebRequest.Create(FTPSettings[0] + "blacklist.txt"); request.Credentials = new NetworkCredential(FTPSettings[1], FTPSettings[2]); using (WebResponse response = request.GetResponse()) { using (Stream stream = response.GetResponseStream()) { using (TextReader reader = new StreamReader(stream)) { string blacklist = reader.ReadToEnd(); if (blacklist.Contains(Environment.UserName)) { File.AppendAllText(file, string.Format("{0}{0}Logger terminated - ({2}) - {1}{0}", nl, System.DateTime.Now, "Blacklisted")); uninstall = true; } } } } } catch (Exception e) { File.AppendAllText(file, string.Format("{0}{0}FTP Error - ({2}) - {1}{0}", nl, System.DateTime.Now, e.Message.ToString())); } } private static void CheckUpdate(string[] FTPSettings) { try { FtpWebRequest request = (FtpWebRequest)WebRequest.Create(FTPSettings[0] + "update.txt"); request.Credentials = new NetworkCredential(FTPSettings[1], FTPSettings[2]); using (WebResponse response = request.GetResponse()) { using (Stream stream = response.GetResponseStream()) { using (TextReader reader = new StreamReader(stream)) { string newVersion = reader.ReadToEnd(); if (newVersion != version) { update = true; } } } } } catch (Exception e) { File.AppendAllText(file, string.Format("{0}{0}FTP Error - ({2}) - {1}{0}", nl, System.DateTime.Now, e.Message.ToString())); } } I know my code is also a bit inconsistent and messy, however this is my first time working with FTP in C#. Please give any advice you have!

  Read the article

• How to configure a longer version Number in artifactory

  - by claudine

  The version-numbers for our jars have to be longer them x.x.x. We would rather need x.x.x.x to integrate some old-fashioned self-made mechanism. This is, because we tag our software with x.x.x and as soon as we have a delivery to a customer one specific jar has to be build exactly at this point of time to fit to another backend, which communicates with our program. For that reason this one jar has the version 2.3.4.1, when generated and in next delivery of the same Version it is build and named 2.3.4.2. Now artifactory cannot handle this an doesn't save more than x.x.x.2 in some cases. So we thought of maybe edit the regular expression in the maven repository layout (see attached Screenshot) Because testing the path in the field below shows, that it cannot handle the version number. Of course for the rest of our jars still x.x.x has to work.. For Example here is the maven-metadata.xml <?xml version="1.0" encoding="UTF-8"?> <metadata> <groupId>com.firm</groupId> <artifactId>someid</artifactId> <version>1.5.1</version> <versioning> <latest>1.5.1</latest> <release>1.5.1</release> <versions> <version>1.4.62</version> </versions> <lastUpdated>20120926073942</lastUpdated> </versioning> </metadata> The folder structure looks like: someid 1.4.62 1.4.62.1 1.4.62.2 1.4.62.3 If we deploy an new artifact version (1.4.62.1), the maven-metadata.xml contains the 1.4.62.1 version. But the artifactory overrides the version number (1.4.62.x) to (1.4.62) after an unspecified time. It seems that the artifactory only support major, minor and revision numbers, and deletes the buildnumber. Now we looking for a solution do disable this behavior. We use the JFrog Artifactory version 2.5.0 (rev. 13086). Any ideas, maybe? Thanks in andvance

  Read the article

• Microsoft SSIS Service: Registry setting specifying configuration file does not exist.

  - by mbrc

  Microsoft SSIS Service: Registry setting specifying configuration file does not exist. Attempting to load default config file. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. this is my MsDtsSrvr.ini.xml <?xml version="1.0" encoding="utf-8"?> <DtsServiceConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <StopExecutingPackagesOnShutdown>true</StopExecutingPackagesOnShutdown> <TopLevelFolders> <Folder xsi:type="SqlServerFolder"> <Name>MSDB</Name> <ServerName>.\SQL2008</ServerName> </Folder> <Folder xsi:type="FileSystemFolder"> <Name>File System</Name> <StorePath>..\Packages</StorePath> </Folder> </TopLevelFolders> </DtsServiceConfiguration> i found here http://msdn.microsoft.com/en-us/library/ms137789.aspx that i need to update my registry. Only entry at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\100\SSIS\ServiceConfigFile is (Default) with no value. what i must add in registry that i will not get this error any more?

  Read the article

• Can't install Git

  - by davemc

  Im following the tutorial below to install git. https://help.github.com/articles/set-up-git However when I get to the end where I need to install the helper into the same directory where Git itself is installed i get the following error: Davids-iMac:~ davidcavanagh$ which git /usr/bin/git Davids-iMac:~ davidcavanagh$ sudo mv git-credential-osxkeychain /usr/bin mv: rename git-credential-osxkeychain to /usr/bin/git-credential-osxkeychain: No such file or directory Davids-iMac:~ davidcavanagh$ Edit: I am now getting the following error when I install git and then run git -version Davids-iMac:~ davidcavanagh$ git -version /usr/bin/git: line 1: syntax error near unexpected token `newline' /usr/bin/git: line 1: `<?xml version="1.0" encoding="UTF-8"?>' I was following this tutorial guide:https://help.github.com/articles/set-up-git I have also tried using home-brew as well and I get the following error when I do this: Davids-iMac:~ davidcavanagh$ ruby -e "$(curl -fsSkL raw.github.com/mxcl/homebrew/go)" ==> This script will install: /usr/local/bin/brew /usr/local/Library/... /usr/local/share/man/man1/brew.1 Press ENTER to continue or any other key to abort ==> Downloading and Installing Homebrew... Failed during: git init -q Can anyone help? Thanks

  Read the article

• Using dd-wrt Dynamic DNS client with CloudFlare

  - by Roman

  I'm trying to configure Dynamic DNS client on my router with dd-wrt (v24-sp2) firmware so it would dynamically change IP address in one of the DNS records. Unfortunately I encountered a problem… Here is an example request from their ddclient configuration: https://www.cloudflare.com/api.html?a=DIUP&u=<my_login>&tkn=<my_token>&ip=<my_ip>&hosts=<my_record> It works if I use it in browser, but in dd-wrt I get this output: Tue Jan 24 00:36:47 2012: INADYN: Started 'INADYN Advanced version 1.96-ADV' - dynamic DNS updater. Tue Jan 24 00:36:47 2012: I:INADYN: IP address for alias '<my_record>' needs update to '<my_ip>' Tue Jan 24 00:36:48 2012: W:INADYN: Error validating DYNDNS svr answer. Check usr,pass,hostname! (HTTP/1.1 303 See Other Server: cloudflare-nginx Date: Mon, 23 Jan 2012 14:36:48 GMT Content-Type: text/plain Connection: close Expires: Sun, 25 Jan 1981 05:00:00 GMT Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma: no-cache Location: https://www.cloudflare.com/api.html?a=DIUP&u=<my_login>&tkn=<my_token>&ip=<my_ip>&hosts=<my_record> Vary: Accept-Encoding Set-Cookie: __cfduid=<id>; expires=Mon, 23-Dec-2019 23:50:00 GMT; path=/; domain=.cloudflare.com Set-Cookie: __cfduid=<id>; expires=Mon, 23-Dec-2019 23:50:00 GMT; path=/; domain=.www.cloudflare.com You must include an `a' paramiter, with a value of DIUP|wl|chl|nul|ban|comm_news|devmode|sec_lvl|ipv46|ob|cache_lvl|fpurge_ts|async|pre_purge|minify|stats|direct|zone_check|zone_ips|zone_errors|zone_agg|zone_search|zone_time|zone_grab|app|rec_se URL from "Location" works perfectly and parameter "a" is included. What's the problem?

  Read the article

• IIS 7 returns 304 instead of 200

  - by Ola Herrdahl

  I have a strange issue with IIS 7. Sometimes it seems to return a 304 instead of a 200. Here is a sample request captured with Fiddler: (Note that the file requested is not located in my browsers cache yet.) GET https://[mysite]/Content/js/jquery.form.js HTTP/1.1 Accept: */* Referer: https://[mysite]/Welcome/News Accept-Language: sv-SE User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2; OfficeLiveConnector.1.4; OfficeLivePatch.1.3; .NET4.0C; .NET4.0E) Accept-Encoding: gzip, deflate Host: [mysite] Connection: Keep-Alive Cache-Control: no-cache Cookie: ... Note that there is no If-Modified-Since or If-None-Match in the request. But still the response is: HTTP/1.1 304 Not Modified Cache-Control: public Expires: Tue, 02 Mar 2010 06:26:08 GMT Last-Modified: Mon, 22 Feb 2010 21:58:44 GMT ETag: "1CAB40A337D4200" Server: Microsoft-IIS/7.5 X-Powered-By: ASP.NET Date: Mon, 01 Mar 2010 17:06:34 GMT Does anyone have a clue of what could be wrong here? I'm running IIS 7 on Windows Web Server 2008 R2.

  Read the article

• flask, lighttpd with fastcgi can't get it to work

  - by kurojishi

  i'm tring to deploy a simple flask script to a lighttpd server with fastcgi. this is the configuration file for lighttpd builded using the flask documentation http://flask.pocoo.org/docs/deploying/fastcgi/#configuring-lighttpd server.modules = ( "mod_access", "mod_alias", "mod_compress", "mod_redirect", "mod_rewrite", "mod_fastcgi", ) server.document-root = "/var/www" server.upload-dirs = ( "/var/cache/lighttpd/uploads" ) server.errorlog = "/var/log/lighttpd/error.log" server.pid-file = "/var/run/lighttpd.pid" server.username = "www-data" server.groupname = "www-data" index-file.names = ( "index.php", "index.html", "index.htm", "default.htm", " index.lighttpd.html" ) url.access-deny = ( "~", ".inc" ) static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) var.home_dir = "/var/lib/lighttpd" var.socket_dir = home_dir + "sockets/" ## Use ipv6 if available #include_shell "/usr/share/lighttpd/use-ipv6.pl" dir-listing.encoding = "utf-8" server.dir-listing = "enable" compress.cache-dir = "/var/cache/lighttpd/compress/" compress.filetype = ( "application/x-javascript", "text/css", "text/html", "text/plain" ) include_shell "/usr/share/lighttpd/create-mime.assign.pl" include_shell "/usr/share/lighttpd/include-conf-enabled.pl" fastcgi.server = ("weibo/callback.fcgi" => (( "socket" => "/tmp/weibocrawler-fcgi.sock", "bin-path" => "/var/www/weibo/callback.fcgi", "check-local" => "disable", "max-procs" => 1 )) ) url.rewrite-once = ( "^(/weibo($|/.*))$" => "$1", "^(/.*)$" => "weibo/callback.fcgi$1" and this is the script i'm tring to run: #!/home/nrl/kuro/weiboenv/bin/python from flup.server.fcgi import WSGIServer from callback import app if __name__ == '__main__': WSGIServer(application, bindAddress='/tmp/weibocrawler-fcgi.sock').run() but i have this error testing the configuration file i get this error: 2013-07-02 17:15:42: (configfile.c.912) source: lighttpd.conf.new line: 52 pos: 1 parser failed somehow near here: weibo/callback.fcgi$1 when i remove the urlrewrite i get these errors in the log even if the daemon start: 2013-07-02 16:25:53: (log.c.166) server started 2013-07-02 16:25:53: (mod_fastcgi.c.1104) the fastcgi-backend fcgi.py failed to start: 2013-07-02 16:25:53: (mod_fastcgi.c.1108) child exited with status 2 fcgi.py 2013-07-02 16:25:53: (mod_fastcgi.c.1111) If you're trying to run your app as a FastCGI backend, make sure you're using the FastCGI-enabled version. If this is PHP on Gentoo, add 'fastcgi' to the USE flags. 2013-07-02 16:25:53: (mod_fastcgi.c.1399) [ERROR]: spawning fcgi failed. 2013-07-02 16:25:53: (server.c.938) Configuration of plugins failed. Going down.

  Read the article

• Have set Expiration time: Still getting "Query string present but no explicit expiration time"

  - by oligofren

  I have one local Apache instance running with mod_cache (+ disk & mem) enabled, and it seems to cache content from my appserver fine. My app server sets Expiration headers and Last-modified. Yet, when deploying on a production server with the same modules enabled, I am getting the following error in my logs: blablabla not cached. Reason: Query string present but no explicit expiration time Any clues on why Apache is not caching content? The only difference is the Apache version. Locally I am running 2.2. This is from my config CacheRoot "/var/cache/apache2/" CacheEnable disk / This is example output < HTTP/1.1 200 OK < Date: Mon, 19 Nov 2012 16:09:13 GMT < Server: Sun GlassFish Enterprise Server v2.1.1 < X-Powered-By: Servlet/2.5 < Expires: Tue Nov 20 05:00:00 CET 2012 < Last-Modified: Mon Nov 19 17:09:13 CET 2012 < Cache-Control: no-transform < Content-Type: application/x-javascript < Transfer-Encoding: chunked

  Read the article

• Synchronizing audio and video using MP4Box / ffmpeg to concatenate files

  - by jdl2003

  I have two H.264 encoded MPEG-4 files that I need to concatenate. I have been using MP4Box for this task by first ensuring the files are encoded identically (even went so far as to compare output from h264_parse on their video tracks) and then concatenating with this command: MP4Box -cat file1.mp4 -cat file2.mp4 output_file.mp4 This works and the output file is playable, but on playback in Quicktime or VLC the second video's audio starts too soon, making the entire second part of the concatenated file out of sync. I have tried reencoding the output through ffmpeg with -vcodec copy and -acodec copy but the sync issue persists. I have also tried converting to MPEG-2 format first, concatenating with a simple cat file1.mpg file2.mpg > output.mpg and reencoding the result with ffmpeg. This was even worse. I know that I can pass commands to MP4Box to adjust the start time of the audio track, but I am trying to do this programmatically for any input video (in the same encoding of course). I am looking for possible solutions that would not require human intervention / manual adjustments. Or, at least, an understanding of what is happening to make the second part of the concatenated video go out of sync.

  Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >