Search Results

Search found 32913 results on 1317 pages for 'open office'.

Page 127/1317 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

  • Open ports broken from internal network

    - by ksvi
    Quick summary: Forwarded port works from the outside world, but from the internal network using the external IP the connection is refused. This is a simplified situation to make the explanation easier: I have a computer that is running a service on port 12345. This computer has an internal IP 192.168.1.100 and is connected directly to a modem/router which has internal IP 192.168.1.1 and external (public, static) IP 1.2.3.4. (The router is TP-LINK TD-w8960N) I have set up port forwarding (virtual server) at port 12345 to go to port 12345 at 192.168.1.100. If I run telnet 192.168.1.100 12345 from the same computer everything works. But running telnet 1.2.3.4 12345 says connection refused. If I do this on another computer (on the same internal network, connected to the router) the same thing happens. This would seem like the port forwarding is not working. However... If I run a online port checking service on my external IP and the service port it says the port is open and I can see the remote server connecting and immediately closing connection. And using another computer that is connected to the internet using a mobile connection I can also use telnet 1.2.3.4 12345 and I get a working connection. So the port forwarding seems to be working, however using external IP from the internal network doesn't. I have no idea what can be causing this, since another setup very much like this (different router) works for me. I can access a service running on a server from inside the network both through the internal and external IP.

    Read the article

  • Google Maps: remember id of marker with open info window

    - by AP257
    I have a Google map that is showing a number of markers. When the user moves the map, the markers are redrawn for the new boundaries, using the code below: GEvent.addListener(map, "moveend", function() { var newBounds = map.getBounds(); for(var i = 0; i < places_json.places.length ; i++) { // if marker is within the new bounds then do... var latlng = new GLatLng(places_json.places[i].lat, places_json.places[i].lon); var html = "blah"; var marker = createMarker(latlng, html); map.addOverlay(marker); } }); My question is simple. If the user has clicked on a marker so that it is showing an open info window, currently when the boundaries are redrawn the info window is closed, because the marker is added again from scratch. How can I prevent this? It is not ideal, because often the boundaries are redrawn when the user clicks on a marker and the map moves to display the info window - so the info window appears and then disappears again :) I guess there are a couple of possible ways: remember which marker has an open info window, and open it again when the markers are redrawn don't actually re-add the marker with an open info window, just leave it there However, both require the marker with an open window to have some kind of ID number, and I don't know that this is actually the case in the Google Maps API. Anyone? ----------UPDATE------------------ I've tried doing it by loading the markers into an initial array, as suggested. This loads OK, but the page crashes after the map is dragged. <script type="text/javascript" src="{{ MEDIA_URL }}js/markerclusterer.js"></script> <script type='text/javascript'> function createMarker(point,html, hideMarker) { //alert('createMarker'); var icon = new GIcon(G_DEFAULT_ICON); icon.image = "http://chart.apis.google.com/chart?cht=mm&chs=24x32&chco=FFFFFF,008CFF,000000&ext=.png"; var tmpMarker = new GMarker(point, {icon: icon, hide: hideMarker}); GEvent.addListener(tmpMarker, "click", function() { tmpMarker.openInfoWindowHtml(html); }); return tmpMarker; } var map = new GMap2(document.getElementById("map_canvas")); map.addControl(new GSmallMapControl()); var mapLatLng = new GLatLng({{ place.lat }}, {{ place.lon }}); map.setCenter(mapLatLng, 12); map.addOverlay(new GMarker(mapLatLng)); // load initial markers from json array var markers = []; var initialBounds = map.getBounds(); for(var i = 0; i < places_json.places.length ; i++) { var latlng = new GLatLng(places_json.places[i].lat, places_json.places[i].lon); var html = "<strong><a href='/place/" + places_json.places[i].placesidx + "/" + places_json.places[i].area + "'>" + places_json.places[i].area + "</a></strong><br/>" + places_json.places[i].county; var hideMarker = true; if((initialBounds.getSouthWest().lat() < places_json.places[i].lat) && (places_json.places[i].lat < initialBounds.getNorthEast().lat()) && (initialBounds.getSouthWest().lng() < places_json.places[i].lon) && (places_json.places[i].lon < initialBounds.getNorthEast().lng()) && (places_json.places[i].placesidx != {{ place.placesidx }})) { hideMarker = false; } var marker = createMarker(latlng, html, hideMarker); markers.push(marker); } var markerCluster = new MarkerClusterer(map, markers, {maxZoom: 11}); </script>

    Read the article

  • How to Extract the images from the doc file without Having Microsoft office ?

    - by Anirudha
    Originally posted on: http://geekswithblogs.net/anirugu/archive/2013/06/29/how-to-extract-the-images-from-the-doc-file-without.aspxMany time we got the doc file who have some images. We need to try to extract them in Microsoft word which come with Windows 7 (not Microsoft office word). Looking to this article http://www.techrepublic.com/blog/itdojo/save-images-in-microsoft-word-documents-as-separate-files/135 This article is only useful when you have Microsoft word installed. Now if I don’t have Microsoft office then what ? No problem, here is a trick. when you open the doc file in Word  then select the image and right click on image and choose cut. open the Microsoft paint. paste them here. Without clicking anywhere click on crop icon on toolbar.   Now you got your image in the same size as you have in word file. Don’t worry about Image format. Microsoft paint have support for save them in PNG format.

    Read the article

  • Trying to access a specific option value to generate a popup window

    - by Isaac
    I am trying to use a click event to generate a popup window based off of the specific value chosen. I am having trouble with the if statement and trying to access each specific option value. Can any of you give me some hints? <select id="offices"> <option value="Choose an Office">Choose an Office</option> <option value="Residential Education (ResEd)" >Residential Education (ResEd)</option> <option value="Dean of Students">Dean of Students</option> <option value="Office of Student Affairs">Office of Student Affairs</option> <option value="Vice-Provost of Student Affairs">Vice-Provost of Student Affairs</option> </select> </div> function display(){ var officearray = [{ Office: "Residential Education (ResEd)", ID: "725-2800", Description: "The Office of Residential Education is responsible for developing the policies, programs, and staffing which support the intellectual, educational, and community-building activities in student residences. Second Floor. " }, { Office: "Dean of Students", ID: "723-7833", Description: "The Dean of Students office is composed of 13 individual administrative units that are concerned with the general welfare of both undergraduate and graduate students, in and out of the classroom. Second floor." }, { Office: "Office of Student Activities (OSA)", ID: "723-2733", Description: "Services for student organizations, student-initiated major events and programs, and fraternities and sororities. Second floor." }, { Office: "Vice-Provost of Student Affairs", ID: "725-0911", Description: "The Vice Provost for Student Affairs is responsible to the Provost for providing services and programs to undergraduate and graduate students in support of the academic mission of the University. Second floor." }] for(var i = 0; i < officearray.length; i++) { var o = document.getElementById("offices") var oString = o.options[o.selectedIndex].value; newwindow2 = window.open('', 'name', 'height=200, width=150') var tmp = newwindow2.document if (oString == officearray[i].Office) { tmp.writeln(officearray[i].Description) } } } document.getElementsByTagName('option').addEventListener("click",display,false)

    Read the article

  • Is there a suitable public license for my needs (see body)?

    - by Ivan
    I would like to license my project with the flowing conditions: Personal and educational usage of the program and its source codes is to be free. In case of publishing of derivative works the original work and author (me) must be mentioned (incl. textual link to my website in a not-very-far-hidden place) and the derivative work must have different name. A derivative work can be closed-source. In every case of commercial (when the end-user is a commercial body (as a company (expect of non-profit companies), an individual entrepreneur or government office)) usage of my work or any of derivative works made by anyone, the end-user, service provider or the derivative author must buy a commercial license from me. I mean no guarantees or resoinsibilities, either expressed or implied... (except the case when one explicitly purchases a support service contract from me and the particular contract specifies a responsibility). Is there a known common license for this case? May it be OSI-approved?

    Read the article

  • PowerPoint Printing Problem c# - Nothing gets printed.

    - by Zeeshan Ahmad
    Guys, i am trying to print powerpoint docs through my windows application in c#. I am using Microsoft.Office.Interop.PowerPoint for this functionality. Following is the code which I have used. It sends the request to printer but nothing gets printed. if you guys have any knowledge plz help. string filename = "C:\\test.ppt"; int copies = 1; Microsoft.Office.Interop.PowerPoint.Presentation work = null; Microsoft.Office.Interop.PowerPoint.Application app = new Microsoft.Office.Interop.PowerPoint.ApplicationClass(); Microsoft.Office.Interop.PowerPoint.Presentations presprint = app.Presentations; work = presprint.Open(filename, Microsoft.Office.Core.MsoTriState.msoCTrue, Microsoft.Office.Core.MsoTriState.msoCTrue, Microsoft.Office.Core.MsoTriState.msoFalse); //app.Visible = Microsoft.Office.Core.MsoTriState.msoTrue; work.PrintOptions.PrintInBackground = Microsoft.Office.Core.MsoTriState.msoFalse; //work.PrintOptions.PrintInBackground = Microsoft.Office.Core.MsoTriState.msoTrue; //work.PrintOptions.ActivePrinter = "HP LaserJet 5000 Series PCL6"; work.PrintOptions.ActivePrinter = app.ActivePrinter; work.PrintOut(1, work.Slides.Count, app.ActivePrinter, copies, Microsoft.Office.Core.MsoTriState.msoFalse); work.Close(); app.Quit();`

    Read the article

  • PXE-E32 TFTP Open Timeout While Attempting to PXE Boot from Windows Deployment Services

    - by bschafer
    I'm running Windows Deployment Services on Windows Server 2008 R2 on top of an ESX 4.0 box. This is the only function of this VM instance, although it had previously functioned as an AD Domain Controller. My DHCP server is running on our primary Domain Controller, which is also Server 2008 R2, but running on metal. Everything was working perfectly until we recently had our backup generator fail during a power outage, causing all of our servers and networking equipment to lose power for a period of time. When we brought all of our equipment back up, everything was working as expected except for WDS. Our network is split up into several different vlans. Now, depending on which vlan the client computer is on, it's behaving differently when attempting to PXE boot into WDS. Our servers are located on the 10.55.x.x vlan, which, due to the nature of it, has no DHCP server active in it. The first computer we plugged in happened to be in the 10.99.x.x vlan, which is supposed to be reserved for network management devices (i.e. switches), but we've been using it occasionally otherwise. That computer gave us PXE-E11 ARP Timeout errors. When we moved to a different computer on the 10.19.x.x vlan (for general purpose use), it finally gets an IP from DHCP, but it presents us with a very stumping PXE-E32 TFTP Open Timeout error. Before the power outage, it didn't matter which vlan a device was on; it would PXE boot and image just fine. I've made no changes to anything server-side. Everything is configured exactly the same way it was on my WDS and DHCP servers as before the power outage. I've tried several different computers, including different models. All of this, combined with the quirky behavior depending on the vlan, makes me think something went wrong in one or more of our switches, probably because of the power outage. Unfortunately, I'm no network guy, and I know very little about how to configure our switches properly. Is this an issue with switches, etc? If so, how can I fix it? Is there some magical option I'm not aware of? Does anybody out there have any hunches? I've pretty much exhausted my ideas. Our main switch is an HP Procurve 5406. We also have 3x HP Procurve 4208 switches. The ESX Server is an HP ProLiant DL380 G6. The WDS VM is currently using the VMXNET3 network adaptor, but we've also tried the E1000 adaptor.

    Read the article

  • free open-source linux screenshot & ocr tool

    - by Gryllida
    I'm looking for a tool which would be able to capture a screen region, pass it to OCR and put the result into clipboard. "import ppm:- | gocr -i - | xclip -selection c" works, but gocr is unreliable: simple text on a webpage has errors. It is a clear font but the OCR tool always misses "r" and replaces it with underscore. "import ppm:- | ocrad -i - | xclip -selection c" says "ocrad: maxval 255 in ppm "P6" file." tesseract needs an image file and does not accept piping input to it. xfce4-screenshooter does not do OCR. ABBYY Screenshot Reader is proprietary. tessnet2 is freeware running on a proprietary platform. Google Docs can OCR screenshots in a batch. But my data is confidential and better not put online. Graphical interface solutions would be acceptable for this question, too. There is a number of existing SuperUser questions about OCR. They fall in several categories. Questions just about OCR without the "screenshot taking" part. Open Source OCR for linux Free OCR for Arabic text Looking for recommendations on OCR problem - tabular numeric data Which has better OCR applications: Ubuntu, or Mac/iPad, or Windows? How can I preform OCR from the command line? OCR solution on linux machine from command line (duplicate) Free OCR software OCR for Sanskrit ( OR devanagari) Copy image and paste to OCR (windows) File processing OCR instead of screenshot. Online OCR website for processing an entire pdf file at one time? Practical OCR solution for converting a large book to a digital format? How to extract text with OCR from a PDF on Linux? Batch-OCR many PDFs OCR Image based PDF Copy image and paste to OCR Extract OCR text from Evernote OCR in Word 2013 Replace (OCR) garbled text in PDF? Process files prior to running OCR. How can I make OCR recognize my documents' text better? Tesseract OCR recognition bilingual document. mistakes tolerance level setup OCR for low quality images How do I get the best quality screenshot for OCR (Optical Character Recognition) and what tool would be the best for screenshots? OCR training. Training Tesseract-OCR for english language fonts None of them answer this question.

    Read the article

  • Open ports broken from internal network

    - by ksvi
    Quick summary: Forwarded port works from the outside world, but from the internal network using the external IP the connection is refused. This is a simplified situation to make the explanation easier: I have a computer that is running a service on port 12345. This computer has an internal IP 192.168.1.100 and is connected directly to a modem/router which has internal IP 192.168.1.1 and external (public, static) IP 1.2.3.4. (The router is TP-LINK TD-w8960N) I have set up port forwarding (virtual server) at port 12345 to go to port 12345 at 192.168.1.100. If I run telnet 192.168.1.100 12345 from the same computer everything works. But running telnet 1.2.3.4 12345 says connection refused. If I do this on another computer (on the same internal network, connected to the router) the same thing happens. This would seem like the port forwarding is not working. However... If I run a online port checking service on my external IP and the service port it says the port is open and I can see the remote server connecting and immediately closing connection. And using another computer that is connected to the internet using a mobile connection I can also use telnet 1.2.3.4 12345 and I get a working connection. So the port forwarding seems to be working, however using external IP from the internal network doesn't. I have no idea what can be causing this, since another setup very much like this (different router) works for me. I can access a service running on a server from inside the network both through the internal and external IP. Note: I know I could just use the internal IP inside of the network to access this service. But if I have a laptop that must be able to do this both from inside and outside it would be annoying to constantly switch between 1.2.3.4 and 192.168.1.100 in the software configuration. Router output: > iptables -t nat -L -n Chain PREROUTING (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 224.0.0.0/3 DNAT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 to:192.168.1.101 DNAT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:25 to:192.168.1.101 DNAT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:110 to:192.168.1.101 DNAT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:12345 to:192.168.1.102 DNAT udp -- 0.0.0.0/0 192.168.1.1 udp dpt:53 to:217.118.96.203 Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- 192.168.1.0/24 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) target prot opt source destination

    Read the article

  • File open fails initially when trying to open a file located on a win2k8 share but eventually can su

    - by Ruddy Douglass
    Core of the problem: I receive "(0x80070002) The system cannot find the file specified" for roughly 8 to 9 seconds before it can open it successfully. In a nutshell, we have two COM components. Component A calls into Component B and asks for a UNC filename to write to - the filename returned doesn't exist yet, but the path does - it then does its work, creates and populates the file, and tells Component B its done by making another com call. At that point Component B will call MoveFile to rename the file to its "official" name. This code has worked for (literally) years. Its works fine on win2k3. Its works fine when its running on win2k8 and points to a share on a win2k3 server. It also runs fine, if the share is actually located on the same win2k8 machine that the code is running on. But if you run it on win2k8 and point it to a share on a different win2k8 server, it fails. Both Component A & component B exist in their own Windows Service running with as a domain admin account. The shares are configured for "Everyone/Full control" in all test environments, similarly so are the underlying folders that the share points to. All machines are in the same domain. During debugging I realized the file actually does exist by the time I get to checking manually for it - after several iterations it occurred to me that the file doesn't "show up" until some delay passes by - so I put in the loop below in component B as shown below: int nCounter = 0; while (true) { CFileStatus fs; if (CFile::GetStatus(tempname, fs)) break; SleepEx(100, FALSE); nCounter++; } This code does, in fact, exit and nCounter is generally between 80 & 90 iterations when it does -- indicating the file "appears" approx 8 to 9 seconds later. Once that loop exits the code can successfully rename the file and all further processing appears to work. I put a CFile::GetStatus in component A immediately before it calls into Component B and that indicates success - it can see the file and get its true size yet the call into component b made immediately after can not see the file until the above indicated delay passes. I have verified the pathnames are precisely the same, even though it would clearly have to be for the calls to eventually succeed after a pause of 8 to 9 seconds... When something like this occurs I always assume there is a bug in my code until proven otherwise, but given (a) this code has executed properly for a very long time and (other than my diagnostic loop added) has not changed, and (b) it works in all environments except the win2k8 - win2k8 share, I'm guessing there is some OS issue in here that i do not understand. Any insight would be helpful. Thanks!

    Read the article

  • File open fails initially when trying to open a file located on a win2k8 share but eventually can su

    - by Ruddy Douglass
    Core of the problem: I receive "(0x80070002) The system cannot find the file specified" for roughly 8 to 9 seconds before it can open it successfully. In a nutshell, we have two COM components. Component A calls into Component B and asks for a UNC filename to write to - the filename returned doesn't exist yet, but the path does - it then does its work, creates and populates the file, and tells Component B its done by making another com call. At that point Component B will call MoveFile to rename the file to its "official" name. This code has worked for (literally) years. Its works fine on win2k3. Its works fine when its running on win2k8 and points to a share on a win2k3 server. It also runs fine, if the share is actually located on the same win2k8 machine that the code is running on. But if you run it on win2k8 and point it to a share on a different win2k8 server, it fails. Both Component A & component B exist in their own Windows Service running with as a domain admin account. The shares are configured for "Everyone/Full control" in all test environments, similarly so are the underlying folders that the share points to. All machines are in the same domain. During debugging I realized the file actually does exist by the time I get to checking manually for it - after several iterations it occurred to me that the file doesn't "show up" until some delay passes by - so I put in the loop below in component B as shown below: int nCounter = 0; while (true) { CFileStatus fs; if (CFile::GetStatus(tempname, fs)) break; SleepEx(100, FALSE); nCounter++; } This code does, in fact, exit and nCounter is generally between 80 & 90 iterations when it does -- indicating the file "appears" approx 8 to 9 seconds later. Once that loop exits the code can successfully rename the file and all further processing appears to work. I put a CFile::GetStatus in component A immediately before it calls into Component B and that indicates success - it can see the file and get its true size yet the call into component b made immediately after can not see the file until the above indicated delay passes. I have verified the pathnames are precisely the same, even though it would clearly have to be for the calls to eventually succeed after a pause of 8 to 9 seconds... When something like this occurs I always assume there is a bug in my code until proven otherwise, but given (a) this code has executed properly for a very long time and (other than my diagnostic loop added) has not changed, and (b) it works in all environments except the win2k8 - win2k8 share, I'm guessing there is some OS issue in here that i do not understand. Any insight would be helpful. Thanks!

    Read the article

  • RFC 1918 address on open internet?

    - by longneck
    In trying to diagnose a failover problem with my Cisco ASA 5520 firewalls, I ran a traceroute to www.btfl.com and, much to my surprise, some of the hops came back as RFC 1918 addresses. Just to be clear, this host is not behind my firewall and there is no VPN involved. I have to connect across the open internet to get there. How/why is this possible? asa# traceroute www.btfl.com Tracing the route to 157.56.176.94 1 <redacted> 2 <redacted> 3 <redacted> 4 <redacted> 5 nap-edge-04.inet.qwest.net (67.14.29.170) 0 msec 10 msec 10 msec 6 65.122.166.30 0 msec 0 msec 10 msec 7 207.46.34.23 10 msec 0 msec 10 msec 8 * * * 9 207.46.37.235 30 msec 30 msec 50 msec 10 10.22.112.221 30 msec 10.22.112.219 30 msec 10.22.112.223 30 msec 11 10.175.9.193 30 msec 30 msec 10.175.9.67 30 msec 12 100.94.68.79 40 msec 100.94.70.79 30 msec 100.94.71.73 30 msec 13 100.94.80.39 30 msec 100.94.80.205 40 msec 100.94.80.137 40 msec 14 10.215.80.2 30 msec 10.215.68.16 30 msec 10.175.244.2 30 msec 15 * * * 16 * * * 17 * * * and it does the same thing from my FiOS connection at home: C:\>tracert www.btfl.com Tracing route to www.btfl.com [157.56.176.94] over a maximum of 30 hops: 1 1 ms <1 ms <1 ms myrouter.home [192.168.1.1] 2 8 ms 7 ms 8 ms <redacted> 3 10 ms 13 ms 11 ms <redacted> 4 12 ms 10 ms 10 ms ae2-0.TPA01-BB-RTR2.verizon-gni.net [130.81.199.82] 5 16 ms 16 ms 15 ms 0.ae4.XL2.MIA19.ALTER.NET [152.63.8.117] 6 14 ms 16 ms 16 ms 0.xe-11-0-0.GW1.MIA19.ALTER.NET [152.63.85.94] 7 19 ms 16 ms 16 ms microsoft-gw.customer.alter.net [63.65.188.170] 8 27 ms 33 ms * ge-5-3-0-0.ash-64cb-1a.ntwk.msn.net [207.46.46.177] 9 * * * Request timed out. 10 44 ms 43 ms 43 ms 207.46.37.235 11 42 ms 41 ms 40 ms 10.22.112.225 12 42 ms 43 ms 43 ms 10.175.9.1 13 42 ms 41 ms 42 ms 100.94.68.79 14 40 ms 40 ms 41 ms 100.94.80.193 15 * * * Request timed out.

    Read the article

  • open source knowledge base CMS system

    - by Thomi
    I'm looking for an open source knowledge base system that uses tags, rather than free-text search to identify articles (a lot like serverfault does). I've looked at twiki, which many people suggested, but haven't found what I'm looking for. Basically I want to be able to create and tag articles, and provide an easy way for anonymous users to search based on tags. Edit: OK, here's some more detail regarding what I want. Basically, all the knowledge base systems I have seen so far are a collection of articles, each article with a title. Most of them allow you to categorise articles into groups and sub-groups. Users of the system can search for information using a title search, for example "How do I print from AwesomeProduct?" - which then shows a list of any articles that match that search text. This is fine and dandy when your KB is for one version of the software product (the mythical AwesomeProduct ver 1.0). However, the development team then go ahead and create a new version (ver 2.0) that adds many new features and changes some existing features. Now, how do we support both products in the same KB? The Naive method is to copy all articles from 1.0, and update them for 2.0, adding and removing articles in 2.0 as required. We can then add text at the top of every 1.0 article that says: "this articles applies to 1.0 only, to see the 2.0 version, click here" (or something similar) The problem with articles being indexed in the system by title is that it's very hard to filter based on meta-data like version. What happens when we create version 3.0 or 4.0? The end-situation here is that you have a mess of articles. They're hard to search, hard to filter, and even harder to manage. The solution (it seems to me) is to use tags, rather than text as the article index mechanism. So articles can be tagged with a tag representing the software version, topic area etc. etc. Users can then filter based on tag - an example search might be "version_1 printing" - which straight away gives a list of articles with all these tags. So that's what I'm looking for - a KB system that uses tags, rather than text to index many articles. I'm sure I could build something with drupal, but I was hoping for something that worked out-of-the-box.

    Read the article

  • Kernel Panic every time I open a print queue

    - by Gray
    Every time I open any printer queue I get a kernel panic and have to reboot. It's quite frustrating. I've tried removing/adding printers, clearing all caches with Onyx, repairing permissions, all manner of things to no avail. Any tips would be greatly appreciated! ==== CRASH REPORT ==== Interval Since Last Panic Report: 25551 sec Panics Since Last Report: 1 Anonymous UUID: 322E8128-0027-4C2F-9264-6A9D9F1BD13E Thu Aug 27 10:04:23 2009 panic(cpu 0 caller 0x001AB0FE): Kernel trap at 0x00233080, type 14=page fault, registers: CR0: 0x8001003b, CR2: 0x00000008, CR3: 0x01157000, CR4: 0x00000660 EAX: 0x00000000, EBX: 0x03f05df0, ECX: 0x2ad007fd, EDX: 0x2ad02d2d CR2: 0x00000008, EBP: 0x2e6abb78, ESI: 0x03f136a0, EDI: 0x03f13640 EFL: 0x00010206, EIP: 0x00233080, CS: 0x00000008, DS: 0x01a70010 Error code: 0x00000000 Backtrace (CPU 0), Frame : Return Address (4 potential args on stack) 0x2e6ab998 : 0x12b4c6 (0x45f91c 0x2e6ab9cc 0x13355c 0x0) 0x2e6ab9e8 : 0x1ab0fe (0x469a98 0x233080 0xe 0x469248) 0x2e6abac8 : 0x1a1713 (0x2e6abae0 0x206 0x2e6abb78 0x233080) 0x2e6abad8 : 0x233080 (0xe 0x3e10048 0x4570010 0x96d0010) 0x2e6abb78 : 0x27866c (0x3f05df0 0x0 0x4ec4 0x3f136a0) 0x2e6abbc8 : 0x249d53 (0x3f13640 0x3e17464 0x55c160 0x3034ed5c) 0x2e6abdc8 : 0x24bb59 (0x3034ed00 0x28 0x9 0x0) 0x2e6abde8 : 0x270186 (0x2e6abe70 0x2e6abe44 0x8 0x0) 0x2e6abe68 : 0x22ca5f (0x3034ed00 0x3034ed00 0x2e6abea8 0xffffffff) 0x2e6abea8 : 0x21b36e (0x1e 0x3034ed00 0x246 0x0) 0x2e6abec8 : 0x217591 (0x3f65c04 0x1e 0x3034ed00 0x3ef2c2) 0x2e6abef8 : 0x217cea (0x530d64 0x4037808 0x3034ed40 0x2e6abf4c) 0x2e6abf68 : 0x217f1b (0x3f65c04 0x3034ed00 0x0 0x530de8) 0x2e6abfc8 : 0x1a14fc (0x530dc0 0x0 0x1a40b5 0x3dd95d0) Backtrace terminated-invalid frame pointer 0 BSD process name corresponding to current thread: kernel_task Mac OS version: 9L31a Kernel version: Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386 System model name: MacBook4,1 (Mac-F22788A9) System uptime in nanoseconds: 30555146093771 unloaded kexts: com.apple.iokit.IOUSBMassStorageClass 2.0.8 - last unloaded 26709525128459 loaded kexts: com.vmware.kext.vmnet 2.0.5 com.vmware.kext.vmioplug 2.0.5 com.vmware.kext.vmci 2.0.5 com.vmware.kext.vmx86 2.0.5 com.apple.driver.iTunesPhoneDriver 1.0 - last loaded 981750246502 com.apple.iokit.IOUSBMassStorageClass 2.0.8 com.apple.filesystems.msdosfs 1.5.5 com.apple.iokit.IOBluetoothSerialManager 2.1.8f2 com.apple.filesystems.autofs 2.0.2 com.apple.driver.AppleHWSensor 1.9d0 com.apple.driver.AppleHDA 1.7.1a2 com.apple.driver.AppleUpstreamUserClient 2.7.5 com.apple.Dont_Steal_Mac_OS_X 6.0.3 com.apple.iokit.CHUDUtils 201 com.apple.iokit.CHUDProf 211 com.apple.driver.AppleIntelGMAX3100 5.4.8 com.apple.driver.AppleIntelGMAX3100FB 5.4.8 com.apple.driver.AppleHDAController 1.7.1a2 com.apple.iokit.IOFireWireIP 1.7.7 com.apple.driver.AppleIRController 113 com.apple.driver.AudioIPCDriver 1.0.6 com.apple.driver.ACPI_SMC_PlatformPlugin 3.4.0a17 com.apple.driver.AppleLPC 1.3.1 com.apple.driver.AppleBacklight 1.6.0 com.apple.driver.SMCMotionSensor 2.1.1d2 com.apple.driver.AppleUSBTrackpad 1.7.4f1 com.apple.driver.AppleUSBTCKeyEventDriver 1.7.4f1 com.apple.driver.AppleUSBTCKeyboard 1.7.4f1 com.apple.driver.CSRUSBBluetoothHCIController 2.1.8f2 com.apple.driver.AppleUSBMergeNub 3.4.6 com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.1.1 com.apple.iokit.SCSITaskUserClient 2.1.1 com.apple.driver.XsanFilter 2.7.91 com.apple.iokit.IOATAPIProtocolTransport 1.5.3 com.apple.iokit.IOAHCIBlockStorage 1.2.2 com.apple.driver.AppleUSBHub 3.4.9 com.apple.iokit.IOUSBUserClient 3.4.9 com.apple.driver.AppleAHCIPort 1.7.0 com.apple.driver.AppleIntelPIIXATA 2.0.1 com.apple.driver.AppleFWOHCI 3.9.7 com.apple.driver.AppleUSBEHCI 3.4.6 com.apple.driver.AppleEFINVRAM 1.2.0 com.apple.iokit.AppleYukon2 3.1.13b2 com.apple.driver.AirPortBrcm43xx 366.91.21 com.apple.driver.AppleUSBUHCI 3.3.5 com.apple.driver.AppleSmartBatteryManager 158.10.5 com.apple.driver.AppleRTC 1.2.3 com.apple.driver.AppleHPET 1.4 com.apple.driver.AppleACPIPCI 1.2.5 com.apple.driver.AppleACPIButtons 1.2.5 com.apple.driver.AppleSMBIOS 1.4 com.apple.driver.AppleACPIEC 1.2.5 com.apple.driver.AppleAPIC 1.4 com.apple.security.seatbelt 107.12 com.apple.nke.applicationfirewall 1.6.77 com.apple.security.TMSafetyNet 3 com.apple.driver.AppleIntelCPUPowerManagement 76.2.0 com.apple.driver.DiskImages 199 com.apple.BootCache 30.4 com.apple.iokit.IOSerialFamily 9.4 com.apple.driver.DspFuncLib 1.7.1a2 com.apple.iokit.CHUDKernLib 201 com.apple.iokit.IOHDAFamily 1.7.1a2 com.apple.iokit.IOAudioFamily 1.6.9fc5 com.apple.kext.OSvKernDSPLib 1.1 com.apple.driver.IOPlatformPluginFamily 3.4.0a17 com.apple.iokit.IONDRVSupport 1.7.3 com.apple.iokit.IOGraphicsFamily 1.7.3 com.apple.driver.AppleSMC 2.3.1d1 com.apple.iokit.IOUSBHIDDriver 3.4.6 com.apple.driver.AppleUSBBluetoothHCIController 2.1.8f2 com.apple.iokit.IOBluetoothFamily 2.1.8f2 com.apple.driver.AppleUSBComposite 3.2.0 com.apple.iokit.IOSCSIBlockCommandsDevice 2.1.1 com.apple.iokit.IOBDStorageFamily 1.5 com.apple.iokit.IODVDStorageFamily 1.5 com.apple.iokit.IOCDStorageFamily 1.5 com.apple.iokit.IOSCSIArchitectureModelFamily 2.1.1 com.apple.iokit.IOAHCIFamily 1.5.0 com.apple.iokit.IOATAFamily 2.0.1 com.apple.iokit.IOFireWireFamily 3.4.9 com.apple.iokit.IO80211Family 216.1 com.apple.iokit.IONetworkingFamily 1.6.1 com.apple.iokit.IOUSBFamily 3.4.9 com.apple.driver.AppleEFIRuntime 1.2.0 com.apple.iokit.IOSMBusFamily 1.1 com.apple.iokit.IOStorageFamily 1.5.6 com.apple.iokit.IOHIDFamily 1.5.5 com.apple.driver.AppleACPIPlatform 1.2.5 com.apple.iokit.IOACPIFamily 1.2.0 com.apple.iokit.IOPCIFamily 2.6 Macbook Black Mac OS X (10.5.8)

    Read the article

  • Increase samba space on open suse 12.1

    - by Kapil Sharma
    I know linux basics but not an expert. IT guy left the job here and there is some time before new hire. So sorry if question is very basic. We have local testing server based on Open SUSE 12.1, which also act as shared drive between dev/mgmt team here and using Samba for that. Now we are running out of space on samba, even though server's 2*1TB harddisk is nearly 90% free. My question is, what is limiting Samba and how can I increase its limit? We need around at least 500 GB as shared drive but currently its just 25 GB. I don't need step by step answer, just a link to any helpful article would be sufficient. Probably I'm putting wrong keywords in google so not getting any helpful link. EDIT: Output of commands in the first comment. All commands were run as root user df -h (getting error with df -ht) Filesystem Size Used Avail Use% Mounted on rootfs 30G 5.1G 23G 19% / devtmpfs 2.0G 36K 2.0G 1% /dev tmpfs 2.0G 1.1M 2.0G 1% /dev/shm tmpfs 2.0G 676K 2.0G 1% /run /dev/sda2 30G 5.1G 23G 19% / tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup tmpfs 2.0G 676K 2.0G 1% /var/run tmpfs 2.0G 0 2.0G 0% /media tmpfs 2.0G 676K 2.0G 1% /var/lock /dev/sda3 36G 31G 3.3G 91% /home fdisk -l /dev/[hmsv]d* Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x2d4a2d49 Device Boot Start End Blocks Id System /dev/sda1 2048 16771071 8384512 82 Linux swap / Solaris /dev/sda2 * 16771072 79681535 31455232 83 Linux /dev/sda3 79681536 156301311 38309888 83 Linux Disk /dev/sda1: 8585 MB, 8585740288 bytes 255 heads, 63 sectors/track, 1043 cylinders, total 16769024 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda1 doesn't contain a valid partition table Disk /dev/sda2: 32.2 GB, 32210157568 bytes 255 heads, 63 sectors/track, 3915 cylinders, total 62910464 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System Disk /dev/sda3: 39.2 GB, 39229325312 bytes 255 heads, 63 sectors/track, 4769 cylinders, total 76619776 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda3 doesn't contain a valid partition table vgs No volume groups found lvs No volume groups found output of vi /etc/samba/smb.conf # smb.conf is the main Samba configuration file. You find a full commented # version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the # samba-doc package is installed. # Date: 2011-11-02 [global] workgroup = WORKGROUP passdb backend = tdbsam printing = cups printcap name = cups printcap cache time = 750 cups options = raw map to guest = Bad User include = /etc/samba/dhcp.conf logon path = \\%L\profiles\.msprofile logon home = \\%L\%U\.9xprofile logon drive = P: usershare allow guests = Yes [homes] comment = Home Directories valid users = %S, %D%w%S browseable = No read only = No inherit acls = Yes [profiles] comment = Network Profiles Service path = %H read only = No store dos attributes = Yes create mask = 0600 directory mask = 0700 [users] comment = All users path = /home read only = No inherit acls = Yes veto files = /aquota.user/groups/shares/ [groups] comment = All groups path = /home/groups read only = No inherit acls = Yes [printers] comment = All Printers path = /var/tmp printable = Yes create mask = 0600 browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/drivers write list = @ntadmin root force group = ntadmin create mask = 0664 directory mask = 0775 [allusers] comment = All Users path = /home/shares/allusers valid users = @users force group = users create mask = 0660 directory mask = 0771 writable = yes

    Read the article

  • Deploying Office 2010 with MDT 2012 - Multiple Customisaton Files?

    - by Tony Blunt
    I'm in the process of setting up a deployment share for Windows 7 and Office 2010 Pro Plus, using MDT 2012. My question involves the customisation of the Office 2010 install. I've imported Office into MDT and I've successfully created a custom MSP file to tailor the settings to our business. However, I need to have a number of different customisations for different groups of users. For instance, our laptop users need Outlook Anywhere configured whereas desktop users do not. Basically - what's the best way of doing this? Do I have to import Office into MDT more than once, each instance using a different MSP, then have the task sequence select the appropriate instance? It's just that this method seems extremely wasteful so I'm thinking that there's a more intelligent way to do it? Or am I coming at this from the wrong direction? Should I be looking at Group Policy to tweak the Outlook settings in this instance? I'm just aware that there are certain things that OCT can do that group policy cannot, so I would have thought that there must be something I can do in MDT. I'm new to MDT so any pointers will be apprectiated. Thanks in advance.

    Read the article

  • Can not open port 3306 on Ubuntu using iptables

    - by user94626
    I am trying to open port 3306 (for remote mysql connections) on my ubuntu 12.04 server machine but for the life of me can't get the damned thing to work! Here is what I did: 1) list current firewall rules: $> sudo iptables -nL -v output: Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 225 16984 fail2ban-ssh tcp -- * * 0.0.0.0/0 0.0.0.0/0 multiport dports 22 220 69605 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 REJECT all -- lo * 0.0.0.0/0 127.0.0.0/8 reject-with icmp-port-unreachable 486 54824 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 1 60 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 19 988 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 1 52 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmptype 8 4 208 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/min burst 5 LOG flags 0 level 7 prefix "iptables denied: " 4 208 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 735 182K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-ssh (1 references) pkts bytes target prot opt in out source destination 225 16984 RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 2) try to connect from remote machine: $> mysql -u root -p -h x.x.x.x output: timeout.... failed to connect 3) try to add a new rule to iptables: iptables -A INPUT -i eth0 -p tcp -m tcp --dport 3306 -j ACCEPT 4) make sure the new rule is added: $> sudo iptables -nL -v output: Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 359 25972 fail2ban-ssh tcp -- * * 0.0.0.0/0 0.0.0.0/0 multiport dports 22 251 78665 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 REJECT all -- lo * 0.0.0.0/0 127.0.0.0/8 reject-with icmp-port-unreachable 628 64420 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 1 60 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 19 988 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 1 52 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmptype 8 5 260 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/min burst 5 LOG flags 0 level 7 prefix "iptables denied: " 5 260 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:3306 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 919 213K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-ssh (1 references) pkts bytes target prot opt in out source destination 359 25972 RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 which appears to be the case (last line in "Chain INPUT" section). 5) try to connect again from remote machine: $> mysql -u root -p -h x.x.x.x output: timeout.... failed to connect which is failing again. 6) try to flush all rules: $> sudo iptables -F 7) this time I CAN CONNECT. 8) reboot server and try to connect, FAILURE. I suspect since the new rule is being appended at the end it will have no effect as there appears to be a "reject all" sort of rule before it. If this is the case, how to make sure the new rule is added in the right order? Otherwise, what am I missing? Please help.

    Read the article

  • uibutton onclick does not call/open web page

    - by raqz
    i have two buttons defined. one of them when clicked must open a compose mail screen and the other when clicked must call. i have this defined as below. but when the button is pressed, it does not open either -(IBAction) phoneButtonPressed:(id) sender{ NSString *phoneNumber = [[NSString alloc] initWithString:@"4216483330"]; [[UIApplication sharedApplication] openURL:[NSURL URLWithString:phoneNumber]]; } -(IBAction) mailButtonPressed:(id) sender{ [[UIApplication sharedApplication] openURL:[NSURL URLWithString:@"mailto:[email protected]?subject=ULS Library"]]; }

    Read the article

  • open default browser with a post in Delphi

    - by Brad
    I know in delphi you can open the default browser with: ShellExecute(self.WindowHandle,'open','www.website.com',nil,nil, SW_SHOWNORMAL); but I'm wanting to know if there is a way to automatically post data on the new opened brower window OR auto fill the login data (even in firefox, safari,etc) Thanks -Brad

    Read the article

  • I just cant get to open WSDL file in Eclipse J2EE Galileo

    - by WarDoGG
    As far as i can see, i have the option of creating web services and WSDL file in Galileo. Also, Looking here there is the Eclipse WSDL viewer : http://wiki.eclipse.org/index.php/Introduction_to_the_WSDL_Editor How can i open a WSDL file in Eclipse ? If i just browse and open the file, nothing happens. Someone please help, this is really frustrating as i cannot seem to find any information online regarding this.

    Read the article

  • python webbrowser.open(url)

    - by Gert Cuykens
    httpd = make_server('', 80, server) webbrowser.open(url) httpd.serve_forever() This works cross platform except when I launch it on a putty ssh terminal. How can i trick the console in opening the w3m browser in a separate process so it can continue to launch the server? Or if it is not possible to skip webbrowser.open when running on a shell without x?

    Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >