Search Results

Search found 3265 results on 131 pages for 'ph zero'.

Page 127/131 | < Previous Page | 123 124 125 126 127 128 129 130 131  | Next Page >

• Backing up my data causes my server to crash using Symantec Backup Exec 12, or How I Came to Loathe

  - by Kyle Noland

  I have a Dell PowerEdge 2850 running Windows Server 2003. It is the primary file server for one of my clients. I have another server also running Windows Server 2003 that acts as the core media server for Symantec Backup Exec 12. I recently upgraded from Backup Exec 11d to 12. This upgrade was necessary because we also just upgraded from Exchange 2003 to Exchange 2007. After the upgrade I had to push-install the new version 12 Backup Exec Remote Agents to each of the servers I am backing up (about 6 total). 5 of my servers are doing just fine, faithfully completing backups every night. My file server routinely crashes. Observations: When the server crashes, it does not blue screen, it just locks up completely. Even the mouse is unresponsive. If you leave the server locked up long enough, it will eventually reboot itself and hang on the Windows splash screen. There is absolutely zero useful Event Viewer evidence of a problem. The logs go from routine logging to an Unexplained Shutdown Event the next morning when I have to hard reset the server to get it to boot. 90% of the time the server does not boot cleanly, it hangs on the Windows splash screen. I don't have any light to shed here. When the server hangs all I can do is hard reset it and try again. Even after a successful boot and chkdsk /r operation, if you reboot the machine, you have a 90% chance it won't back up again cleanly. The back story: This server started crashing during nightly backups about a month ago. I tried everything I could think of to troubleshoot the problem and eventually had to give up because I could not keep coming to the office at 4 AM to try to get the server back online. One Friday I got lucky and the server stayed up for its entire full backup. I took this opportunity to restore the full backup to a temporary server I set up and switched all my users to the temporary. Then I reloaded the ailing file server. I kept all my users on the temporary file server for about 3 weeks. I installed the same Backup Exec Remote Agent and Trend Micro A/V client on the temporary server that I was using on the regular file server. During this time, I had absolutely no problems backing up the temporary server. I tested the reloaded file server extensively. I rebooted the server once an hour every day for 3 weeks trying to make it fail. It never did. I felt confident that the reload was the answer to my problems. I moved all of the data from the temporary server back to the regular server. I got 3 nightly backups out of it before it locked up again and started the familiar failure to boot cleanly behavior. This weekend I decided to monitor the file server through the entire backup job. I RDPd into the file server and also into the server running Backup Exec. On the file server I opened the Task Manager so I could view the processes and watch CPU and memory usage. Everything was running smoothly for about 60GB worth of backup. Then I noticed that the byte count of the backup job in Backup Exec had stopped progressing. I looked back over at my RDP session into the file server, and I was getting real time updates about CPU and memory usage still - both nearly 0%, which is unusual. Backups usually hover around 40% usage for the duration of the backup job. Let me reiterate this point: The screen was refreshing and I was getting real time Task Manager updates - until I clicked on the Start menu. The screen went black and the server locked up. In truth, I think the server had already locked up, the video card just hadn't figured it out yet. I went back into my bag of trick: driving to the office and hard reseting the server over and over again when it hangs up at the Windows splash screen. I did this for 2 hours without getting a successful boot. I started panicking because I did not have a decent backup to use to get everything back onto the working temporary file server. Once I exhausted everything I knew to do, I took a deep breath, booted to the Windows Server 2003 CD and performed a repair installation of Windows. The server came back up fine, with all of my data intact. I can now reboot the server at will and it will come back up cleanly. The problem is that I'm afraid as soon as I try to back that data up again I will back at square one. So let me sum things up: Here is what I've done so far to troubleshoot this server: Deleted and recreated the RAID 5 sets. Initialized the drives. Reloaded the server with a fresh Server 2003 install. Confirmed with Dell that I have installed the latest, Dell approved BIOS and NIC drivers. Uninstalled / reinstalled the Backup Exec Remote Agent. Uninstalled the Trend Micro A/V client. Configured the server not to reboot itself after a blue screen so I can see any stop error. I used to think the server was blue screening, but since I enabled this setting I now know that the server just completely locks up. Run chkdsk /r from the Windows Recovery Console. Several errors were found and corrected, but did not help my problem. Help confirm or deny the following assumptions: There are two problems at work here. Why the server is locking up in the first place, and why the server won't boot cleanly after a lockup. This is ultimately a software problem. The server works fine and can be rebooted cleanly all day long - until the first lockup - following a fresh OS load or even a Repair installation. This is not a problem with Backup Exec in general. All of my other servers back up just fine. For the record, all of the other servers run Server 2003, and some of them house more data than the file server in question here. Any help is appreciated. The irony is almost too much to bear. Backing up my data is what is jeopardizing it.

  Read the article

• File Access problems with SLES 10 SP2 OES2 SP1

  - by Blackhawk131

  We have identified a couple of repeatable, demonstrable scenarios with unexplained rejected folder access on our servers for Mac users. Hopefully, this can be presented to Novell for a solution. What we did to demonstrate scenario 1; 1. setup a PC and Mac side-by-side 2. login to our server and open up to a central location on both Mac and PC 3. on the PC in that central location create a folder 4. on the Mac in that central location drag the created folder to the Mac desktop, this should work fine, no problem 5. on the PC rename that folder 6. on the Mac drag a file to that renamed folder, this should error with the following message; a. You cannot copy some of these items to the destination because their names are too long for the destination. Do you want to skip copying these items and continue copying the other items? b. Select skip, response is the filename is copied to the location with zero or small byte size. Try opening it and you get file is corrupted error message. What we did to demonstrate scenario 2; 1. setup a PC and Mac side-by-side 2. login to our server and open up to a central location on both Mac and PC 3. on the PC in that central location create a folder then create a subfolder 4. copy some content into the subfolder 5. on the Mac in that central location drag the created top level folder to the Mac desktop, this should work fine, no problem 6. on the PC rename that subfolder 7. on the Mac drag that top level folder to the Mac desktop, this should error on the Mac with the following; a. The operation cannot be completed because you do not have sufficient privileges for b. The operation cannot be completed because you do not have sufficient privileges for 8. on the Mac, if you open that subfolder you can see the file copied in step 4 above but, you can not open that file, you get the following message if you try; a. There was an error opening this document. You do not have permission to open this file. 9. on the PC drag some content into the top level folder 10. on the Mac you can open that file directly from the server or copy it locally, no problem, however-the subfolder is still corrupted or locked, whichever 11. on the PC rename the top level folder 12. on the Mac that same file just opened in step 10 above is now not accessible, get the following message; a. The document could not be opened. I have observed some variances in the above. For instance, a change on the PC side may take a moment before you can observer or act on the Mac side - kind of like the server is slow to respond. Also, the error message may vary. However, the key is once a folder, or subfolder, gets renamed by a PC, Mac problems commence. The solution is to create a new folder from a PC and copy the contents of the corrupted folder to the new folder and not rename the folder name. This has to be done on a PC because the corrupted folder is not accessible by a Mac user. Another problem that dovetails with the above is that we know certain characters are not allowed for PC folder or filenames. If a Mac user creates a folder with a slash in the file name, from the PC the user does not see that slash in the name. As soon as the PC user copies a file to that folder, the Mac user is locked from that folder. Will get the following error message; - Sorry, the operation could not be completed because an unexpected error occurred. - (Error code - 50) In addition to the above mentioned character issue with folders, the problem is more evil with filenames. If, for example, you create a file with a slash in the filename on a Mac and copy it to the server you will get the following error message; - You cannot copy some of these items to the destination because their names are too long for the destination. Do you want to skip copying these items and continue copying the other items? Select either Stop or Skip buttons. It does not matter which button is selected. The file name gets copied to the destination location at a reduced size. Depending on the file type, the icon associated with the file may or may not be present. Furthermore, if you open that file on the server you will get the following message; - Couldnt open the file. It may be corrupt or a file format that doesnt recognize. From the users perspective, if they are not observant of the icon or file size, they may disregard the error message and think their file has copied as intended. Only later do they discover the file is corrupt if they open that file. I want to make a note on this problem. It is the PC causing the issue. You can change folder and file names all day on a MAC and you don't have a problem as long as a character is not the issue. Once you change the file name or folder name from a PC the entire folder structure from that level down is corrupted. But it has to be resolved from a PC by creating a new folder and copying the contents to the new folder like stated above. Is something not configured correctly? SUSE Linux Enterprise Server 10 (x86_64) VERSION = 10 PATCHLEVEL = 2 LSB_VERSION="core-2.0-noarch:core-3.0-noarch:core-2.0-x86_64:core-3.0-x86_64" Novell Open Enterprise Server 2.0.1 (x86_64) VERSION = 2.0.1 PATCHLEVEL = 1 BUILD Note: We use Novell clients on all windows systems to connect to the servers for file access and network storage. We use AFP to allow OSx systems to connect to servers.

  Read the article

• Asp.net Google Charts SSL handler for GeoMap

  - by Ian

  Hi All, I am trying to view Google charts in a site using SSL. Google Charts do not support SSL so if we use the standard charts, we get warning messages. My plan is to create a ASHX handler that is co9ntained in the secure site that will retrieve the content from Google and serve this to the page the user is viewing. Using VS 2008 SP1 and the included web server, my idea works perfectly for both Firefox and IE 8 & 9(Preview) and I am able to see my geomap displayed on my page as it should be. But my problem is when I publish to IIS7 the page using my handler to generate the geomap works in Firefox but not IE(every version). There are no errors anywhere or in any log files, but when i right click in IE in the area where the map should be displayed, I see the message in the context menu saying "movie not loaded" Below is the code from my handler and the aspx page. I have disabled compression in my web.config. Even in IE I am hitting all my break points and when I use the IE9 Developer tools, the web page is correctly generated with all the correct code, url's and references. If you have any better ways to accomplish this or how i can fix my problem, I will appreciate it. Thanks Ian Handler(ASHX) public void ProcessRequest(HttpContext context) { String url = "http://charts.apis.google.com/jsapi"; string query = context.Request.QueryString.ToString(); if (!string.IsNullOrEmpty(query)) { url = query; } HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(new Uri(HttpUtility.UrlDecode(url))); request.UserAgent = context.Request.UserAgent; WebResponse response = request.GetResponse(); string PageContent = string.Empty; StreamReader Reader; Stream webStream = response.GetResponseStream(); string contentType = response.ContentType; context.Response.BufferOutput = true; context.Response.ContentType = contentType; context.Response.Cache.SetCacheability(HttpCacheability.NoCache); context.Response.Cache.SetNoServerCaching(); context.Response.Cache.SetMaxAge(System.TimeSpan.Zero); string newUrl = IanLearning.Properties.Settings.Default.HandlerURL; //"https://localhost:444/googlesecurecharts.ashx?"; if (response.ContentType.Contains("javascript")) { Reader = new StreamReader(webStream); PageContent = Reader.ReadToEnd(); PageContent = PageContent.Replace("http://", newUrl + "http://"); PageContent = PageContent.Replace("charts.apis.google.com", newUrl + "charts.apis.google.com"); PageContent = PageContent.Replace(newUrl + "http://maps.google.com/maps/api/", "http://maps.google.com/maps/api/"); context.Response.Write(PageContent); } else { { byte[] bytes = ReadFully(webStream); context.Response.BinaryWrite(bytes); } } context.Response.Flush(); response.Close(); webStream.Close(); context.Response.End(); context.ApplicationInstance.CompleteRequest(); } ASPX Page <%@ Page Title="" Language="C#" MasterPageFile="~/Site2.Master" AutoEventWireup="true" CodeBehind="googlechart.aspx.cs" Inherits="IanLearning.googlechart" %> <asp:Content ID="Content1" ContentPlaceHolderID="head" runat="server"> <script type='text/javascript' src='~/googlesecurecharts.ashx?'></script> <script type='text/javascript'> google.load('visualization', '1', { 'packages': ['geomap'] }); google.setOnLoadCallback(drawMap); var geomap; function drawMap() { var data = new google.visualization.DataTable(); data.addRows(6); data.addColumn('string', 'City'); data.addColumn('number', 'Sales'); data.setValue(0, 0, 'ZA'); data.setValue(0, 1, 200); data.setValue(1, 0, 'US'); data.setValue(1, 1, 300); data.setValue(2, 0, 'BR'); data.setValue(2, 1, 400); data.setValue(3, 0, 'CN'); data.setValue(3, 1, 500); data.setValue(4, 0, 'IN'); data.setValue(4, 1, 600); data.setValue(5, 0, 'ZW'); data.setValue(5, 1, 700); var options = {}; options['region'] = 'world'; options['dataMode'] = 'regions'; options['showZoomOut'] = false; var container = document.getElementById('map_canvas'); geomap = new google.visualization.GeoMap(container); google.visualization.events.addListener( geomap, 'regionClick', function(e) { drillDown(e['region']); }); geomap.draw(data, options); }; function drillDown(regionData) { alert(regionData); } </script> </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="ContentPlaceHolder1" runat="server"> <div id='map_canvas'> </div> </asp:Content>

  Read the article

• Troubleshooting latency spikes on ESXi NFS datastores

  - by exo_cw

  I'm experiencing fsync latencies of around five seconds on NFS datastores in ESXi, triggered by certain VMs. I suspect this might be caused by VMs using NCQ/TCQ, as this does not happen with virtual IDE drives. This can be reproduced using fsync-tester (by Ted Ts'o) and ioping. For example using a Grml live system with a 8GB disk: Linux 2.6.33-grml64: root@dynip211 /mnt/sda # ./fsync-tester fsync time: 5.0391 fsync time: 5.0438 fsync time: 5.0300 fsync time: 0.0231 fsync time: 0.0243 fsync time: 5.0382 fsync time: 5.0400 [... goes on like this ...] That is 5 seconds, not milliseconds. This is even creating IO-latencies on a different VM running on the same host and datastore: root@grml /mnt/sda/ioping-0.5 # ./ioping -i 0.3 -p 20 . 4096 bytes from . (reiserfs /dev/sda): request=1 time=7.2 ms 4096 bytes from . (reiserfs /dev/sda): request=2 time=0.9 ms 4096 bytes from . (reiserfs /dev/sda): request=3 time=0.9 ms 4096 bytes from . (reiserfs /dev/sda): request=4 time=0.9 ms 4096 bytes from . (reiserfs /dev/sda): request=5 time=4809.0 ms 4096 bytes from . (reiserfs /dev/sda): request=6 time=1.0 ms 4096 bytes from . (reiserfs /dev/sda): request=7 time=1.2 ms 4096 bytes from . (reiserfs /dev/sda): request=8 time=1.1 ms 4096 bytes from . (reiserfs /dev/sda): request=9 time=1.3 ms 4096 bytes from . (reiserfs /dev/sda): request=10 time=1.2 ms 4096 bytes from . (reiserfs /dev/sda): request=11 time=1.0 ms 4096 bytes from . (reiserfs /dev/sda): request=12 time=4950.0 ms When I move the first VM to local storage it looks perfectly normal: root@dynip211 /mnt/sda # ./fsync-tester fsync time: 0.0191 fsync time: 0.0201 fsync time: 0.0203 fsync time: 0.0206 fsync time: 0.0192 fsync time: 0.0231 fsync time: 0.0201 [... tried that for one hour: no spike ...] Things I've tried that made no difference: Tested several ESXi Builds: 381591, 348481, 260247 Tested on different hardware, different Intel and AMD boxes Tested with different NFS servers, all show the same behavior: OpenIndiana b147 (ZFS sync always or disabled: no difference) OpenIndiana b148 (ZFS sync always or disabled: no difference) Linux 2.6.32 (sync or async: no difference) It makes no difference if the NFS server is on the same machine (as a virtual storage appliance) or on a different host Guest OS tested, showing problems: Windows 7 64 Bit (using CrystalDiskMark, latency spikes happen mostly during preparing phase) Linux 2.6.32 (fsync-tester + ioping) Linux 2.6.38 (fsync-tester + ioping) I could not reproduce this problem on Linux 2.6.18 VMs. Another workaround is to use virtual IDE disks (vs SCSI/SAS), but that is limiting performance and the number of drives per VM. Update 2011-06-30: The latency spikes seem to happen more often if the application writes in multiple small blocks before fsync. For example fsync-tester does this (strace output): pwrite(3, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"..., 1048576, 0) = 1048576 fsync(3) = 0 ioping does this while preparing the file: [lots of pwrites] pwrite(3, "********************************"..., 4096, 1036288) = 4096 pwrite(3, "********************************"..., 4096, 1040384) = 4096 pwrite(3, "********************************"..., 4096, 1044480) = 4096 fsync(3) = 0 The setup phase of ioping almost always hangs, while fsync-tester sometimes works fine. Is someone capable of updating fsync-tester to write multiple small blocks? My C skills suck ;) Update 2011-07-02: This problem does not occur with iSCSI. I tried this with the OpenIndiana COMSTAR iSCSI server. But iSCSI does not give you easy access to the VMDK files so you can move them between hosts with snapshots and rsync. Update 2011-07-06: This is part of a wireshark capture, captured by a third VM on the same vSwitch. This all happens on the same host, no physical network involved. I've started ioping around time 20. There were no packets sent until the five second delay was over: No. Time Source Destination Protocol Info 1082 16.164096 192.168.250.10 192.168.250.20 NFS V3 WRITE Call (Reply In 1085), FH:0x3eb56466 Offset:0 Len:84 FILE_SYNC 1083 16.164112 192.168.250.10 192.168.250.20 NFS V3 WRITE Call (Reply In 1086), FH:0x3eb56f66 Offset:0 Len:84 FILE_SYNC 1084 16.166060 192.168.250.20 192.168.250.10 TCP nfs > iclcnet-locate [ACK] Seq=445 Ack=1057 Win=32806 Len=0 TSV=432016 TSER=769110 1085 16.167678 192.168.250.20 192.168.250.10 NFS V3 WRITE Reply (Call In 1082) Len:84 FILE_SYNC 1086 16.168280 192.168.250.20 192.168.250.10 NFS V3 WRITE Reply (Call In 1083) Len:84 FILE_SYNC 1087 16.168417 192.168.250.10 192.168.250.20 TCP iclcnet-locate > nfs [ACK] Seq=1057 Ack=773 Win=4163 Len=0 TSV=769110 TSER=432016 1088 23.163028 192.168.250.10 192.168.250.20 NFS V3 GETATTR Call (Reply In 1089), FH:0x0bb04963 1089 23.164541 192.168.250.20 192.168.250.10 NFS V3 GETATTR Reply (Call In 1088) Directory mode:0777 uid:0 gid:0 1090 23.274252 192.168.250.10 192.168.250.20 TCP iclcnet-locate > nfs [ACK] Seq=1185 Ack=889 Win=4163 Len=0 TSV=769821 TSER=432716 1091 24.924188 192.168.250.10 192.168.250.20 RPC Continuation 1092 24.924210 192.168.250.10 192.168.250.20 RPC Continuation 1093 24.924216 192.168.250.10 192.168.250.20 RPC Continuation 1094 24.924225 192.168.250.10 192.168.250.20 RPC Continuation 1095 24.924555 192.168.250.20 192.168.250.10 TCP nfs > iclcnet_svinfo [ACK] Seq=6893 Ack=1118613 Win=32625 Len=0 TSV=432892 TSER=769986 1096 24.924626 192.168.250.10 192.168.250.20 RPC Continuation 1097 24.924635 192.168.250.10 192.168.250.20 RPC Continuation 1098 24.924643 192.168.250.10 192.168.250.20 RPC Continuation 1099 24.924649 192.168.250.10 192.168.250.20 RPC Continuation 1100 24.924653 192.168.250.10 192.168.250.20 RPC Continuation 2nd Update 2011-07-06: There seems to be some influence from TCP window sizes. I was not able to reproduce this problem using FreeNAS (based on FreeBSD) as a NFS server. The wireshark captures showed TCP window updates to 29127 bytes in regular intervals. I did not see them with OpenIndiana, which uses larger window sizes by default. I can no longer reproduce this problem if I set the following options in OpenIndiana and restart the NFS server: ndd -set /dev/tcp tcp_recv_hiwat 8192 # default is 128000 ndd -set /dev/tcp tcp_max_buf 1048575 # default is 1048576 But this kills performance: Writing from /dev/zero to a file with dd_rescue goes from 170MB/s to 80MB/s. Update 2011-07-07: I've uploaded this tcpdump capture (can be analyzed with wireshark). In this case 192.168.250.2 is the NFS server (OpenIndiana b148) and 192.168.250.10 is the ESXi host. Things I've tested during this capture: Started "ioping -w 5 -i 0.2 ." at time 30, 5 second hang in setup, completed at time 40. Started "ioping -w 5 -i 0.2 ." at time 60, 5 second hang in setup, completed at time 70. Started "fsync-tester" at time 90, with the following output, stopped at time 120: fsync time: 0.0248 fsync time: 5.0197 fsync time: 5.0287 fsync time: 5.0242 fsync time: 5.0225 fsync time: 0.0209 2nd Update 2011-07-07: Tested another NFS server VM, this time NexentaStor 3.0.5 community edition: Shows the same problems. Update 2011-07-31: I can also reproduce this problem on the new ESXi build 4.1.0.433742.

  Read the article

• Problem with Variable Scoping in Rebol's Object

  - by Rebol Tutorial

  I have modified the rebodex app so that it can be called from rebol's console any time by typing rebodex. To show the title of the app, I need to store it in app-title: system/script/header/title so tha it could be used later in view/new/title dex reform [self/app-title version] That works but as you can see I have named the var name "app-title", but if I use "title" instead, the window caption would show weird stuff (vid code). Why ? REBOL [ Title: "Rebodex" Date: 23-May-2010 Version: 2.1.1 File: %rebodex.r Author: "Carl Sassenrath" Modification: "Rebtut" Purpose: "A simple but useful address book contact database." Email: %carl--rebol--com library: [ level: 'intermediate platform: none type: 'tool domain: [file-handling DB GUI] tested-under: none support: none license: none see-also: none ] ] rebodex.context: context [ app-title: system/script/header/title version: system/script/header/version set 'rebodex func[][ names-path: %names.r ;data file name-list: none fields: [name company title work cell home car fax web email smail notes updat] names: either exists? names-path [load names-path][ [[name "Carl Sassenrath" title "Founder" company "REBOL Technologies" email "%carl--rebol--com" web "http://www.rebol.com"]] ] brws: [ if not empty? web/text [ if not find web/text "http://" [insert web/text "http://"] error? try [browse web/text] ] ] dial: [request [rejoin ["Dial number for " name/text "? (Not implemented.)"] "Dial" "Cancel"]] dex-styles: stylize [ lab: label 60x20 right bold middle font-size 11 btn: button 64x20 font-size 11 edge [size: 1x1] fld: field 200x20 font-size 11 middle edge [size: 1x1] inf: info font-size 11 middle edge [size: 1x1] ari: field wrap font-size 11 edge [size: 1x1] with [flags: [field tabbed]] ] dex-pane1: layout/offset [ origin 0 space 2x0 across styles dex-styles lab "Name" name: fld bold return lab "Title" title: fld return lab "Company" company: fld return lab "Email" email: fld return lab "Web" brws web: fld return lab "Address" smail: ari 200x72 return lab "Updated" updat: inf 200x20 return ] 0x0 updat/flags: none dex-pane2: layout/offset [ origin 0 space 2x0 across styles dex-styles lab "Work #" dial work: fld 140 return lab "Home #" dial home: fld 140 return lab "Cell #" dial cell: fld 140 return lab "Alt #" dial car: fld 140 return lab "Fax #" fax: fld 140 return lab "Notes" notes: ari 140x72 return pad 136x1 btn "Close" #"^q" [store-entry save-file unview] ] 0x0 dex: layout [ origin 8x8 space 0x1 styles dex-styles srch: fld 196x20 bold across rslt: list 180x150 [ nt: txt 178x15 middle font-size 11 [ store-entry curr: cnt find-name nt/text update-entry unfocus show dex ] ] supply [ cnt: count + scroll-off face/text: "" face/color: snow if not n: pick name-list cnt [exit] face/text: select n 'name face/font/color: black if curr = cnt [face/color: system/view/vid/vid-colors/field-select] ] sl: slider 16x150 [scroll-list] return return btn "New" #"^n" [new-name] btn "Del" #"^d" [delete-name unfocus update-entry search-all show dex] btn "Sort" [sort names sort name-list show rslt] return at srch/offset + (srch/size * 1x0) bx1: box dex-pane1/size bx2: box dex-pane2/size return ] bx1/pane: dex-pane1/pane bx2/pane: dex-pane2/pane rslt/data: [] this-name: first names name-list: copy names curr: none search-text: "" scroll-off: 0 srch/feel: make srch/feel [ redraw: func [face act pos][ face/color: pick face/colors face system/view/focal-face if all [face = system/view/focal-face face/text search-text] [ search-text: copy face/text search-all if 1 = length? name-list [this-name: first name-list update-entry show dex] ] ] ] update-file: func [data] [ set [path file] split-path names-path if not exists? path [make-dir/deep path] write names-path data ] save-file: has [buf] [ buf: reform [{REBOL [Title: "Name Database" Date:} now "]^/[^/"] foreach n names [repend buf [mold n newline]] update-file append buf "]" ] delete-name: does [ remove find/only names this-name if empty? names [append-empty] save-file new-name ] clean-names: function [][n][ forall names [ if any [empty? first names none? n: select first names 'name empty? n][ remove names ] ] names: head names ] search-all: function [] [ent flds] [ clean-names clear name-list flds: [name] either empty? search-text [insert name-list names][ foreach nam names [ foreach word flds [ if all [ent: select nam word find ent search-text][ append/only name-list nam break ] ] ] ] scroll-off: 0 sl/data: 0 resize-drag scroll-list curr: none show [rslt sl] ] new-name: does [ store-entry clear-entry search-all append-empty focus name ; update-entry ] append-empty: does [append/only names this-name: copy []] find-name: function [str][] [ foreach nam names [ if str = select nam 'name [ this-name: nam break ] ] ] store-entry: has [val ent flag] [ flag: 0 if not empty? trim name/text [ foreach word fields [ val: trim get in get word 'text either ent: select this-name word [ if ent val [insert clear ent val flag: flag + 1] ][ if not empty? val [repend this-name [word copy val] flag: flag + 1] ] if flag = 1 [flag: 2 updat/text: form now] ] if not zero? flag [save-file] ] ] update-entry: does [ foreach word fields [ insert clear get in get word 'text any [select this-name word ""] ] show rslt ] clear-entry: does [ clear-fields bx1 clear-fields bx2 updat/text: form now unfocus show dex ] show-names: does [ clear rslt/data foreach n name-list [ if n/name [append rslt/data n/name] ] show rslt ] scroll-list: does [ scroll-off: max 0 to-integer 1 + (length? name-list) - (100 / 16) * sl/data show rslt ] do resize-drag: does [sl/redrag 100 / max 1 (16 * length? name-list)] center-face dex new-name focus srch show-names view/new/title dex reform [app-title version] insert-event-func [ either all [event/type = 'close event/face = dex][ store-entry unview ][event] ] do-events ] ]

  Read the article

• Matlab Image watermarking question , using both SVD and DWT

  - by Georgek

  Hello all . here is a code that i got over the net ,and it is supposed to embed a watermark of size(50*20) called _copyright.bmp in the Code below . the size of the cover object is (512*512), it is called _lena_std_bw.bmp.What we did here is we did DWT2 2 times for the image , when we reached our second dwt2 cA2 size is 128*128. You should notice that the blocksize and it equals 4, it is used to determine the max msg size based on cA2 according to the following code:max_message=RcA2*CcA2/(blocksize^2). in our current case max_message would equal 128*128/(4^2)=1024. i want to embed a bigger watermark in the 2nd dwt2 and lets say the size of that watermark is 400*10(i can change the dimension using MS PAINT), what i have to do is change the size of the blocksize to 2. so max_message=4096.Matlab gives me 3 errors and they are : ??? Error using == plus Matrix dimensions must agree. Error in == idwt2 at 93 x = upsconv2(a,{Lo_R,Lo_R},sx,dwtEXTM,shift)+ ... % Approximation. Error in == two_dwt_svd_low_low at 88 CAA1 = idwt2(cA22,cH2,cV2,cD2,'haar',[RcA1,CcA1]); The origional Code is (the origional code where blocksize =4): %This algorithm makes DWT for the whole image and after that make DWT for %cH1 and make SVD for cH2 and embed the watermark in every level after SVD %(1) -------------- Embed Watermark ------------------------------------ %Add the watermar W to original image I and give the watermarked image in J %-------------------------------------------------------------------------- % set the gain factor for embeding and threshold for evaluation clc; clear all; close all; % save start time start_time=cputime; % set the value of threshold and alpha thresh=.5; alpha =0.01; % read in the cover object file_name='_lena_std_bw.bmp'; cover_object=double(imread(file_name)); % determine size of watermarked image Mc=size(cover_object,1); %Height Nc=size(cover_object,2); %Width % read in the message image and reshape it into a vector file_name='_copyright.bmp'; message=double(imread(file_name)); T=message; Mm=size(message,1); %Height Nm=size(message,2); %Width % perform 1-level DWT for the whole cover image [cA1,cH1,cV1,cD1] = dwt2(cover_object,'haar'); % determine the size of cA1 [RcA1 CcA1]=size(cA1) % perform 2-level DWT for cA1 [cA2,cH2,cV2,cD2] = dwt2(cA1,'haar'); % determine the size of cA2 [RcA2 CcA2]=size(cA2) % set the value of blocksize blocksize=4 % reshape the watermark to a vector message_vector=round(reshape(message,Mm*Nm,1)./256); W=message_vector; % determine maximum message size based on cA2, and blocksize max_message=RcA2*CcA2/(blocksize^2) % check that the message isn't too large for cover if (length(message) max_message) error('Message too large to fit in Cover Object') end %----------------------- process the image in blocks ---------------------- x=1; y=1; for (kk = 1:length(message_vector)) [cA2u cA2s cA2v]=svd(cA2(y:y+blocksize-1,x:x+blocksize-1)); % if message bit contains zero, modify S of the original image if (message_vector(kk) == 0) cA2s = cA2s*(1 + alpha); % otherwise mask is filled with zeros else cA2s=cA2s; end cA22(y:y+blocksize-1,x:x+blocksize-1)=cA2u*cA2s*cA2v; % move to next block of mask along x; If at end of row, move to next row if (x+blocksize) >= CcA2 x=1; y=y+blocksize; else x=x+blocksize; end end % perform IDWT CAA1 = idwt2(cA22,cH2,cV2,cD2,'haar',[RcA1,CcA1]); watermarked_image= idwt2(CAA1,cH1,cV1,cD1,'haar',[Mc,Nc]); % convert back to uint8 watermarked_image_uint8=uint8(watermarked_image); % write watermarked Image to file imwrite(watermarked_image_uint8,'dwt_watermarked.bmp','bmp'); % display watermarked image figure(1) imshow(watermarked_image_uint8,[]) title('Watermarked Image') %(2) ---------------------------------------------------------------------- %---------- Extract Watermark from attacked watermarked image ------------- %-------------------------------------------------------------------------- % read in the watermarked object file_name='dwt_watermarked.bmp'; watermarked_image=double(imread(file_name)); % determine size of watermarked image Mw=size(watermarked_image,1); %Height Nw=size(watermarked_image,2); %Width % perform 1-level DWT for the whole watermarked image [ca1,ch1,cv1,cd1] = dwt2(watermarked_image,'haar'); % determine the size of ca1 [Rca1 Cca1]=size(ca1); % perform 2-level DWT for ca1 [ca2,ch2,cv2,cd2] = dwt2(ca1,'haar'); % determine the size of ca2 [Rca2 Cca2]=size(ca2); % process the image in blocks % for each block get a bit for message x=1; y=1; for (kk = 1:length(message_vector)) % sets correlation to 1 when patterns are identical to avoid /0 errors % otherwise calcluate difference between the cover image and the % watermarked image [cA2u cA2s cA2v]=svd(cA2(y:y+blocksize-1,x:x+blocksize-1)); [ca2u1 ca2s1 ca2v1]=svd(ca2(y:y+blocksize-1,x:x+blocksize-1)); correlation(kk)=diag(ca2s1-cA2s)'*diag(ca2s1-cA2s)/(alpha*alpha)/(diag(cA2s)*diag(cA2s)); % move on to next block. At and of row move to next row if (x+blocksize) >= Cca2 x=1; y=y+blocksize; else x=x+blocksize; end end % if correlation exceeds average correlation correlation(kk)=correlation(kk)+mean(correlation(1:Mm*Nm)); for kk = 1:length(correlation) if (correlation(kk) > thresh*alpha);%thresh*mean(correlation(1:Mo*No))) message_vector(kk)=0; end end % reshape the message vector and display recovered watermark. figure(2) message=reshape(message_vector(1:Mm*Nm),Mm,Nm); imshow(message,[]) title('Recovered Watermark') % display processing time elapsed_time=cputime-start_time, please do help,its my graduation project and i have been trying this code for along time but failed miserable. Thanks in advance

  Read the article

• problems in trying ieee 802.15.4 working from msk

  - by asel

  Hi, i took a msk code from dsplog.com and tried to modify it to test the ieee 802.15.4. There are several links on that site for ieee 802.15.4. Currently I am getting simulated ber results all approximately same for all the cases of Eb_No values. Can you help me to find why? thanks in advance! clear PN = [ 1 1 0 1 1 0 0 1 1 1 0 0 0 0 1 1 0 1 0 1 0 0 1 0 0 0 1 0 1 1 1 0; 1 1 1 0 1 1 0 1 1 0 0 1 1 1 0 0 0 0 1 1 0 1 0 1 0 0 1 0 0 0 1 0; 0 0 1 0 1 1 1 0 1 1 0 1 1 0 0 1 1 1 0 0 0 0 1 1 0 1 0 1 0 0 1 0; 0 0 1 0 0 0 1 0 1 1 1 0 1 1 0 1 1 0 0 1 1 1 0 0 0 0 1 1 0 1 0 1; 0 1 0 1 0 0 1 0 0 0 1 0 1 1 1 0 1 1 0 1 1 0 0 1 1 1 0 0 0 0 1 1; 0 0 1 1 0 1 0 1 0 0 1 0 0 0 1 0 1 1 1 0 1 1 0 1 1 0 0 1 1 1 0 0; 1 1 0 0 0 0 1 1 0 1 0 1 0 0 1 0 0 0 1 0 1 1 1 0 1 1 0 1 1 0 0 1; 1 0 0 1 1 1 0 0 0 0 1 1 0 1 0 1 0 0 1 0 0 0 1 0 1 1 1 0 1 1 0 1; 1 0 0 0 1 1 0 0 1 0 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 1 1 1 0 1 1; 1 0 1 1 1 0 0 0 1 1 0 0 1 0 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 1 1; 0 1 1 1 1 0 1 1 1 0 0 0 1 1 0 0 1 0 0 1 0 1 1 0 0 0 0 0 0 1 1 1; 0 1 1 1 0 1 1 1 1 0 1 1 1 0 0 0 1 1 0 0 1 0 0 1 0 1 1 0 0 0 0 0; 0 0 0 0 0 1 1 1 0 1 1 1 1 0 1 1 1 0 0 0 1 1 0 0 1 0 0 1 0 1 1 0; 0 1 1 0 0 0 0 0 0 1 1 1 0 1 1 1 1 0 1 1 1 0 0 0 1 1 0 0 1 0 0 1; 1 0 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 1 1 1 0 1 1 1 0 0 0 1 1 0 0; 1 1 0 0 1 0 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 1 1 1 0 1 1 1 0 0 0; ]; N = 5*10^5; % number of bits or symbols fsHz = 1; % sampling period T = 4; % symbol duration Eb_N0_dB = [0:10]; % multiple Eb/N0 values ct = cos(pi*[-T:N*T-1]/(2*T)); st = sin(pi*[-T:N*T-1]/(2*T)); for ii = 1:length(Eb_N0_dB) tx = []; % MSK Transmitter ipBit = round(rand(1,N/32)*15); for k=1:length(ipBit) sym = ipBit(k); tx = [tx PN((sym+1),1:end)]; end ipMod = 2*tx - 1; % BPSK modulation 0 -> -1, 1 -> 1 ai = kron(ipMod(1:2:end),ones(1,2*T)); % even bits aq = kron(ipMod(2:2:end),ones(1,2*T)); % odd bits ai = [ai zeros(1,T) ]; % padding with zero to make the matrix dimension match aq = [zeros(1,T) aq ]; % adding delay of T for Q-arm % MSK transmit waveform xt = 1/sqrt(T)*[ai.*ct + j*aq.*st]; % Additive White Gaussian Noise nt = 1/sqrt(2)*[randn(1,N*T+T) + j*randn(1,N*T+T)]; % white gaussian noise, 0dB variance % Noise addition yt = xt + 10^(-Eb_N0_dB(ii)/20)*nt; % additive white gaussian noise % MSK receiver % multiplying with cosine and sine waveforms xE = conv(real(yt).*ct,ones(1,2*T)); xO = conv(imag(yt).*st,ones(1,2*T)); bHat = zeros(1,N); bHat(1:2:end) = xE(2*T+1:2*T:end-2*T); % even bits bHat(2:2:end) = xO(3*T+1:2*T:end-T); % odd bits result=zeros(16,1); chiplen=32; seqstart=1; recovered = []; while(seqstart<length(bHat)) A = bHat(seqstart:seqstart+(chiplen-1)); for j=1:16 B = PN(j,1:end); result(j)=sum(A.*B); end [value,index] = max(result); recovered = [recovered (index-1)]; seqstart = seqstart+chiplen; end; %# create binary string - the 4 forces at least 4 bits bstr1 = dec2bin(ipBit,4); bstr2 = dec2bin(recovered,4); %# convert back to numbers (reshape so that zeros are preserved) out1 = str2num(reshape(bstr1',[],1))'; out2 = str2num(reshape(bstr2',[],1))'; % counting the errors nErr(ii) = size(find([out1 - out2]),2); end nErr/(length(ipBit)*4) % simulated ber theoryBer = 0.5*erfc(sqrt(10.^(Eb_N0_dB/10))) % theoretical ber

  Read the article

• Accessing py2exe program over network in Windows 98 throws ImportErrors

  - by darvids0n

  I'm running a py2exe-compiled python program from one server machine on a number of client machines (mapped to a network drive on every machine, say W:). For Windows XP and later machines, have so far had zero problems with Python picking up W:\python23.dll (yes, I'm using Python 2.3.5 for W98 compatibility and all that). It will then use W:\zlib.pyd to decompress W:\library.zip containing all the .pyc files like os and such, which are then imported and the program runs no problems. The issue I'm getting is on some Windows 98 SE machines (note: SOME Windows 98 SE machines, others seem to work with no apparent issues). What happens is, the program runs from W:, the W:\python23.dll is, I assume, found (since I'm getting Python ImportErrors, we'd need to be able to execute a Python import statement), but a couple of things don't work: 1) If W:\library.zip contains the only copy of the .pyc files, I get ZipImportError: can't decompress data; zlib not available (nonsense, considering W:\zlib.pyd IS available and works fine with the XP and higher machines on the same network). 2) If the .pyc files are actually bundled INSIDE the python exe by py2exe, OR put in the same directory as the .exe, OR put into a named subdirectory which is then set as part of the PYTHONPATH variable (e.g W:\pylib), I get ImportError: no module named os (os is the first module imported, before sys and anything else). Come to think of it, sys.path wouldn't be available to search if os was imported before it maybe? I'll try switching the order of those imports but my question still stands: Why is this a sporadic issue, working on some networks but not on others? And how would I force Python to find the files that are bundled inside the very executable I run? I have immediate access to the working Windows 98 SE machine, but I only get access to the non-working one (a customer of mine) every morning before their store opens. Thanks in advance! EDIT: Okay, big step forward. After debugging with PY2EXE_VERBOSE, the problem occurring on the specific W98SE machine is that it's not using the right path syntax when looking for imports. Firstly, it doesn't seem to read the PYTHONPATH environment variable (there may be a py2exe-specific one I'm not aware of, like PY2EXE_VERBOSE). Secondly, it only looks in one place before giving up (if the files are bundled inside the EXE, it looks there. If not, it looks in library.zip). EDIT 2: In fact, according to this, there is a difference between the sys.path in the Python interpreter and that of Py2exe executables. Specifically, sys.path contains only a single entry: the full pathname of the shared code archive. Blah. No fallbacks? Not even the current working directory? I'd try adding W:\ to PATH, but py2exe doesn't conform to any sort of standards for locating system libraries, so it won't work. Now for the interesting bit. The path it tries to load atexit, os, etc. from is: W:\\library.zip\<module>.<ext> Note the single slash after library.zip, but the double slash after the drive letter (someone correct me if this is intended and should work). It looks like if this is a string literal, then since the slash isn't doubled, it's read as an (invalid) escape sequence and the raw character is printed (giving W:\library.zipos.pyd, W:\library.zipos.dll, ... instead of with a slash); if it is NOT a string literal, the double slash might not be normpath'd automatically (as it should be) and so the double slash confuses the module loader. Like I said, I can't just set PYTHONPATH=W:\\library.zip\\ because it ignores that variable. It may be worth using sys.path.append at the start of my program but hard-coding module paths is an absolute LAST resort, especially since the problem occurs in ONE configuration of an outdated OS. Any ideas? I have one, which is to normpath the sys.path.. pity I need os for that. Another is to just append os.getenv('PATH') or os.getenv('PYTHONPATH') to sys.path... again, needing the os module. The site module also fails to initialise, so I can't use a .pth file. I also recently tried the following code at the start of the program: for pth in sys.path: fErr.write(pth) fErr.write(' to ') pth.replace('\\\\','\\') # Fix Windows 98 pathing issues fErr.write(pth) fErr.write('\n') But it can't load linecache.pyc, or anything else for that matter; it can't actually execute those commands from the looks of things. Is there any way to use built-in functionality which doesn't need linecache to modify the sys.path dynamically? Or am I reduced to hard-coding the correct sys.path?

  Read the article

• Repeated Squaring - Matrix Multiplication using NEWMAT

  - by Dinakar Kulkarni

  I'm trying to use the repeated squaring algorithm (using recursion) to perform matrix exponentiation. I've included header files from the NEWMAT library instead of using arrays. The original matrix has elements in the range (-5,5), all numbers being of type float. # include "C:\User\newmat10\newmat.h" # include "C:\User\newmat10\newmatio.h" # include "C:\User\newmat10\newmatap.h" # include <iostream> # include <time.h> # include <ctime> # include <cstdlib> # include <iomanip> using namespace std; Matrix repeated_squaring(Matrix A, int exponent, int n) //Recursive function { A(n,n); IdentityMatrix I(n); if (exponent == 0) //Matrix raised to zero returns an Identity Matrix return I; else { if ( exponent%2 == 1 ) // if exponent is odd return (A * repeated_squaring (A*A, (exponent-1)/2, n)); else //if exponent is even return (A * repeated_squaring( A*A, exponent/2, n)); } } Matrix direct_squaring(Matrix B, int k, int no) //Brute Force Multiplication { B(no,no); Matrix C = B; for (int i = 1; i <= k; i++) C = B*C; return C; } //----Creating a matrix with elements b/w (-5,5)---- float unifRandom() { int a = -5; int b = 5; float temp = (float)((b-a)*( rand()/RAND_MAX) + a); return temp; } Matrix initialize_mat(Matrix H, int ord) { H(ord,ord); for (int y = 1; y <= ord; y++) for(int z = 1; z<= ord; z++) H(y,z) = unifRandom(); return(H); } //--------------------------------------------------- void main() { int exponent, dimension; cout<<"Insert exponent:"<<endl; cin>>exponent; cout<< "Insert dimension:"<<endl; cin>>dimension; cout<<"The number of rows/columns in the square matrix is: "<<dimension<<endl; cout<<"The exponent is: "<<exponent<<endl; Matrix A(dimension,dimension),B(dimension,dimension); Matrix C(dimension,dimension),D(dimension,dimension); B= initialize_mat(A,dimension); cout<<"Initial Matrix: "<<endl; cout<<setw(5)<<setprecision(2)<<B<<endl; //----------------------------------------------------------------------------- cout<<"Repeated Squaring Result: "<<endl; clock_t time_before1 = clock(); C = repeated_squaring (B, exponent , dimension); cout<< setw(5) <<setprecision(2) <<C; clock_t time_after1 = clock(); float diff1 = ((float) time_after1 - (float) time_before1); cout << "It took " << diff1/CLOCKS_PER_SEC << " seconds to complete" << endl<<endl; //--------------------------------------------------------------------------------- cout<<"Direct Squaring Result:"<<endl; clock_t time_before2 = clock(); D = direct_squaring (B, exponent , dimension); cout<<setw(5)<<setprecision(2)<<D; clock_t time_after2 = clock(); float diff2 = ((float) time_after2 - (float) time_before2); cout << "It took " << diff2/CLOCKS_PER_SEC << " seconds to complete" << endl<<endl; } I face the following problems: The random number generator returns only "-5" as each element in the output. The Matrix multiplication yield different results with brute force multiplication and using the repeated squaring algorithm. I'm timing the execution time of my code to compare the times taken by brute force multiplication and by repeated squaring. Could someone please find out what's wrong with the recursion and with the matrix initialization? NOTE: While compiling this program, make sure you've imported the NEWMAT library. Thanks in advance!

  Read the article

• linux thread synchronization

  - by johnnycrash

  I am new to linux and linux threads. I have spent some time googling to try to understand the differences between all the functions available for thread synchronization. I still have some questions. I have found all of these different types of synchronizations, each with a number of functions for locking, unlocking, testing the lock, etc. gcc atomic operations futexes mutexes spinlocks seqlocks rculocks conditions semaphores My current (but probably flawed) understanding is this: semaphores are process wide, involve the filesystem (virtually I assume), and are probably the slowest. Futexes might be the base locking mechanism used by mutexes, spinlocks, seqlocks, and rculocks. Futexes might be faster than the locking mechanisms that are based on them. Spinlocks dont block and thus avoid context swtiches. However they avoid the context switch at the expense of consuming all the cycles on a CPU until the lock is released (spinning). They should only should be used on multi processor systems for obvious reasons. Never sleep in a spinlock. The seq lock just tells you when you finished your work if a writer changed the data the work was based on. You have to go back and repeat the work in this case. Atomic operations are the fastest synch call, and probably are used in all the above locking mechanisms. You do not want to use atomic operations on all the fields in your shared data. You want to use a lock (mutex, futex, spin, seq, rcu) or a single atomic opertation on a lock flag when you are accessing multiple data fields. My questions go like this: Am I right so far with my assumptions? Does anyone know the cpu cycle cost of the various options? I am adding parallelism to the app so we can get better wall time response at the expense of running fewer app instances per box. Performances is the utmost consideration. I don't want to consume cpu with context switching, spinning, or lots of extra cpu cycles to read and write shared memory. I am absolutely concerned with number of cpu cycles consumed. Which (if any) of the locks prevent interruption of a thread by the scheduler or interrupt...or am I just an idiot and all synchonization mechanisms do this. What kinds of interruption are prevented? Can I block all threads or threads just on the locking thread's CPU? This question stems from my fear of interrupting a thread holding a lock for a very commonly used function. I expect that the scheduler might schedule any number of other workers who will likely run into this function and then block because it was locked. A lot of context switching would be wasted until the thread with the lock gets rescheduled and finishes. I can re-write this function to minimize lock time, but still it is so commonly called I would like to use a lock that prevents interruption...across all processors. I am writing user code...so I get software interrupts, not hardware ones...right? I should stay away from any functions (spin/seq locks) that have the word "irq" in them. Which locks are for writing kernel or driver code and which are meant for user mode? Does anyone think using an atomic operation to have multiple threads move through a linked list is nuts? I am thinking to atomicly change the current item pointer to the next item in the list. If the attempt works, then the thread can safely use the data the current item pointed to before it was moved. Other threads would now be moved along the list. futexes? Any reason to use them instead of mutexes? Is there a better way than using a condition to sleep a thread when there is no work? When using gcc atomic ops, specifically the test_and_set, can I get a performance increase by doing a non atomic test first and then using test_and_set to confirm? *I know this will be case specific, so here is the case. There is a large collection of work items, say thousands. Each work item has a flag that is initialized to 0. When a thread has exclusive access to the work item, the flag will be one. There will be lots of worker threads. Any time a thread is looking for work, they can non atomicly test for 1. If they read a 1, we know for certain that the work is unavailable. If they read a zero, they need to perform the atomic test_and_set to confirm. So if the atomic test_and_set is 500 cpu cycles because it is disabling pipelining, causes cpu's to communicate and L2 caches to flush/fill .... and a simple test is 1 cycle .... then as long as I had a better ratio of 500 to 1 when it came to stumbling upon already completed work items....this would be a win.* I hope to use mutexes or spinlocks to sparilngly protect sections of code that I want only one thread on the SYSTEM (not jsut the CPU) to access at a time. I hope to sparingly use gcc atomic ops to select work and minimize use of mutexes and spinlocks. For instance: a flag in a work item can be checked to see if a thread has worked it (0=no, 1=yes or in progress). A simple test_and_set tells the thread if it has work or needs to move on. I hope to use conditions to wake up threads when there is work. Thanks!

  Read the article

• File Access problems with SLES 10 SP2 OES2 SP1

  - by Blackhawk131

  We have identified a couple of repeatable, demonstrable scenarios with unexplained rejected folder access on our servers for Mac users. Hopefully, this can be presented to Novell for a solution. What we did to demonstrate scenario 1; 1. setup a PC and Mac side-by-side 2. login to our server and open up to a central location on both Mac and PC 3. on the PC in that central location create a folder 4. on the Mac in that central location drag the created folder to the Mac desktop, this should work fine, no problem 5. on the PC rename that folder 6. on the Mac drag a file to that renamed folder, this should error with the following message; a. You cannot copy some of these items to the destination because their names are too long for the destination. Do you want to skip copying these items and continue copying the other items? b. Select skip, response is the filename is copied to the location with zero or small byte size. Try opening it and you get file is corrupted error message. What we did to demonstrate scenario 2; 1. setup a PC and Mac side-by-side 2. login to our server and open up to a central location on both Mac and PC 3. on the PC in that central location create a folder then create a subfolder 4. copy some content into the subfolder 5. on the Mac in that central location drag the created top level folder to the Mac desktop, this should work fine, no problem 6. on the PC rename that subfolder 7. on the Mac drag that top level folder to the Mac desktop, this should error on the Mac with the following; a. The operation cannot be completed because you do not have sufficient privileges for b. The operation cannot be completed because you do not have sufficient privileges for 8. on the Mac, if you open that subfolder you can see the file copied in step 4 above but, you can not open that file, you get the following message if you try; a. There was an error opening this document. You do not have permission to open this file. 9. on the PC drag some content into the top level folder 10. on the Mac you can open that file directly from the server or copy it locally, no problem, however-the subfolder is still corrupted or locked, whichever 11. on the PC rename the top level folder 12. on the Mac that same file just opened in step 10 above is now not accessible, get the following message; a. The document could not be opened. I have observed some variances in the above. For instance, a change on the PC side may take a moment before you can observer or act on the Mac side - kind of like the server is slow to respond. Also, the error message may vary. However, the key is once a folder, or subfolder, gets renamed by a PC, Mac problems commence. The solution is to create a new folder from a PC and copy the contents of the corrupted folder to the new folder and not rename the folder name. This has to be done on a PC because the corrupted folder is not accessible by a Mac user. Another problem that dovetails with the above is that we know certain characters are not allowed for PC folder or filenames. If a Mac user creates a folder with a slash in the file name, from the PC the user does not see that slash in the name. As soon as the PC user copies a file to that folder, the Mac user is locked from that folder. Will get the following error message; - Sorry, the operation could not be completed because an unexpected error occurred. - (Error code - 50) In addition to the above mentioned character issue with folders, the problem is more evil with filenames. If, for example, you create a file with a slash in the filename on a Mac and copy it to the server you will get the following error message; - You cannot copy some of these items to the destination because their names are too long for the destination. Do you want to skip copying these items and continue copying the other items? Select either Stop or Skip buttons. It does not matter which button is selected. The file name gets copied to the destination location at a reduced size. Depending on the file type, the icon associated with the file may or may not be present. Furthermore, if you open that file on the server you will get the following message; - Couldnt open the file. It may be corrupt or a file format that doesnt recognize. From the users perspective, if they are not observant of the icon or file size, they may disregard the error message and think their file has copied as intended. Only later do they discover the file is corrupt if they open that file. I want to make a note on this problem. It is the PC causing the issue. You can change folder and file names all day on a MAC and you don't have a problem as long as a character is not the issue. Once you change the file name or folder name from a PC the entire folder structure from that level down is corrupted. But it has to be resolved from a PC by creating a new folder and copying the contents to the new folder like stated above. Is something not configured correctly? SUSE Linux Enterprise Server 10 (x86_64) VERSION = 10 PATCHLEVEL = 2 LSB_VERSION="core-2.0-noarch:core-3.0-noarch:core-2.0-x86_64:core-3.0-x86_64" Novell Open Enterprise Server 2.0.1 (x86_64) VERSION = 2.0.1 PATCHLEVEL = 1 BUILD Note: We use Novell clients on all windows systems to connect to the servers for file access and network storage. We use AFP to allow OSx systems to connect to servers.

  Read the article

• Fibre channel long distance woes

  - by Marki

  I need a fresh pair of eyes. We're using a 15km fibre optic line across which fibrechannel and 10GbE is multiplexed (passive optical CWDM). For FC we have long distance lasers suitable up to 40km (Skylane SFCxx0404F0D). The multiplexer is limited by the SFPs which can do max. 4Gb fibrechannel. The FC switch is a Brocade 5000 series. The respective wavelengths are 1550,1570,1590 and 1610nm for FC and 1530nm for 10GbE. The problem is the 4GbFC fabrics are almost never clean. Sometimes they are for a while even with a lot of traffic on them. Then they may suddenly start producing errors (RX CRC, RX encoding, RX disparity, ...) even with only marginal traffic on them. I am attaching some error and traffic graphs. Errors are currently in the order of 50-100 errors per 5 minutes when with 1Gb/s traffic. Optics Here is the power output of one port summarized (collected using sfpshow on different switches) SITE-A units=uW (microwatt) SITE-B ********************************************** FAB1 SW1 TX 1234.3 RX 49.1 SW3 1550nm (ko) RX 95.2 TX 1175.6 FAB2 SW2 TX 1422.0 RX 104.6 SW4 1610nm (ok) RX 54.3 TX 1468.4 What I find curious at this point is the asymmetry in the power levels. While SW2 transmits with 1422uW which SW4 receives with 104uW, SW2 only receives the SW4 signal with similar original power only with 54uW. Vice versa for SW1-3. Anyway the SFPs have RX sensitivity down to -18dBm (ca. 20uW) so in any case it should be fine... But nothing is. Some SFPs have been diagnosed as malfunctioning by the manufacturer (the 1550nm ones shown above with "ko"). The 1610nm ones apparently are ok, they have been tested using a traffic generator. The leased line has also been tested more than once. All is within tolerances. I'm awaiting the replacements but for some reason I don't believe it will make things better as the apparently good ones don't produce ZERO errors either. Earlier there was active equipment involved (some kind of 4GFC retimer) before putting the signal on the line. No idea why. That equipment was eliminated because of the problems so we now only have: the long distance laser in the switch, (new) 10m LC-SC monomode cable to the mux (for each fabric), the leased line, the same thing but reversed on the other side of the link. FC switches Here is a port config from the Brocade portcfgshow (it's like that on both sides, obviously) Area Number: 0 Speed Level: 4G Fill Word(On Active) 0(Idle-Idle) Fill Word(Current) 0(Idle-Idle) AL_PA Offset 13: OFF Trunk Port ON Long Distance LS VC Link Init OFF Desired Distance 32 Km Reserved Buffers 70 Locked L_Port OFF Locked G_Port OFF Disabled E_Port OFF Locked E_Port OFF ISL R_RDY Mode OFF RSCN Suppressed OFF Persistent Disable OFF LOS TOV enable OFF NPIV capability ON QOS E_Port OFF Port Auto Disable: OFF Rate Limit OFF EX Port OFF Mirror Port OFF Credit Recovery ON F_Port Buffers OFF Fault Delay: 0(R_A_TOV) NPIV PP Limit: 126 CSCTL mode: OFF Forcing the links to 2GbFC produces no errors, but we bought 4GbFC and we want 4GbFC. I don't know where to look anymore. Any ideas what to try next or how to proceed? If we can't make 4GbFC work reliably I wonder what the people working with 8 or 16 do... I don't assume that "a few errors here and there" are acceptable. Oh and BTW we are in contact with everyone of the manufacturers (FC switch, MUX, SFPs, ...) Except for the SFPs to be changed (some have been changed before) nobody has a clue. Brocade SAN Health says the fabric is ok. MUX, well, it's passive, it's only a prism, nature at it's best. Any shots in the dark? APPENDIX: Answers to your questions @Chopper3: This is the second generation of Brocades exhibiting the problem. Before we had 5000s, now we have 5100s. In the beginning when we still had the active MUX we rented a longdistance laser once to put it into the switch directly in order to make tests for a day, during that day of course it was clean. But as I said, sometimes it's clean just like that. And sometimes it's not. Alternative switches would mean to rebuild the entire SAN with those only to test. Alternative SFPs, well they're hard to come by just like that. @longneck: The line is rented. It's a dark fibre (9um monomode) so there's noone else on it. Sure there are splices. I can't go and look but I have to trust they have been done correctly. As I said the line has been checked and rechecked (using an optical time-domain reflectometer). Obviously you don't have all this equipment yourself because it's way too expensive. @mdpc: What would be the "wrong" type of cable according to you? Up to the switch everything is monomode, yes. The connectors are the correct ones too. Yeah I know there are the green ones where the fibre is cut off at a certain angle etc. But we have the correct ones for all that I know. Progress Report #1 We have had two fabrics (=2x2 switches) with Brocade 5100s with FabricOS 6.4.1 and two fabrics (another 2x4 switches) on FabricOS 7.0.2. On the longdistance ISLs (one in each fabric) it turned out that with FOS 6.4.1 setting it to long distance issues warnings about the VC Init setting and consequently the fill word. But those are only warnings. FOS 7.0.2 requires you to do modifications to VCI and the fillword for long distance links. Setting FOS 6.4.1 to the LS (long-distance static distance) setting with wrong VCI and fillword setting made the whole fabric inoperational (stuck in an SCN loop, use fabriclog -s to see, you don't see it anywhere else, no port error counters or anything increasing). Currently I'm giving the one fabric with the IMHO more correct settings a beating and it seems to do fine, whereas the other one without much traffic still has errors here and there. In short: We have eliminated the active part of the MUX (the FC retimer). We are putting the long distance SFPs into the end equipment themselves. Just to be sure we bought new monomode cables to connect the end equipment to the remaining passive part of the MUX. We are now trying out several long distance configs. It's almost black magic. Everything that happens is mostly empirical, noone seems to have a clue what are the exact reasons to do something. ("We have tried this, and it didn't work, then we tried that and it worked, so we stuck with that." But noone really seems to know why.) I'll keep you updated. Progress Report #2 We got the new lasers for one of the fabrics on warranty. It's ultra clean even on 4GbFC. They're transmitting with roughly 2mW (3dBm) whereas the others are only at 1.5mW (1.5dBm) although that should really be enough. The other fabric (where the lasers are apparently ok) still produces one or two CRCs infrequently. Using sfpshow the SFP producing the actual RX errors shows Status/Ctrl: 0x82 Alarm flags[0,1] = 0x5, 0x40 Warn Flags[0,1] = 0x5, 0x40 Now I'll have to find out what that means. Not sure if it was there before. Well I'll first clear my head with a week of vacation. 8-)

  Read the article

• Python - Converting CSV to Objects - Code Design

  - by victorhooi

  Hi, I have a small script we're using to read in a CSV file containing employees, and perform some basic manipulations on that data. We read in the data (import_gd_dump), and create an Employees object, containing a list of Employee objects (maybe I should think of a better naming convention...lol). We then call clean_all_phone_numbers() on Employees, which calls clean_phone_number() on each Employee, as well as lookup_all_supervisors(), on Employees. import csv import re import sys #class CSVLoader: # """Virtual class to assist with loading in CSV files.""" # def import_gd_dump(self, input_file='Gp Directory 20100331 original.csv'): # gd_extract = csv.DictReader(open(input_file), dialect='excel') # employees = [] # for row in gd_extract: # curr_employee = Employee(row) # employees.append(curr_employee) # return employees # #self.employees = {row['dbdirid']:row for row in gd_extract} # Previously, this was inside a (virtual) class called "CSVLoader". # However, according to here (http://tomayko.com/writings/the-static-method-thing) - the idiomatic way of doing this in Python is not with a class-fucntion but with a module-level function def import_gd_dump(input_file='Gp Directory 20100331 original.csv'): """Return a list ('employee') of dict objects, taken from a Group Directory CSV file.""" gd_extract = csv.DictReader(open(input_file), dialect='excel') employees = [] for row in gd_extract: employees.append(row) return employees def write_gd_formatted(employees_dict, output_file="gd_formatted.csv"): """Read in an Employees() object, and write out each Employee() inside this to a CSV file""" gd_output_fieldnames = ('hrid', 'mail', 'givenName', 'sn', 'dbcostcenter', 'dbdirid', 'hrreportsto', 'PHFull', 'PHFull_message', 'SupervisorEmail', 'SupervisorFirstName', 'SupervisorSurname') try: gd_formatted = csv.DictWriter(open(output_file, 'w', newline=''), fieldnames=gd_output_fieldnames, extrasaction='ignore', dialect='excel') except IOError: print('Unable to open file, IO error (Is it locked?)') sys.exit(1) headers = {n:n for n in gd_output_fieldnames} gd_formatted.writerow(headers) for employee in employees_dict.employee_list: # We're using the employee object's inbuilt __dict__ attribute - hmm, is this good practice? gd_formatted.writerow(employee.__dict__) class Employee: """An Employee in the system, with employee attributes (name, email, cost-centre etc.)""" def __init__(self, employee_attributes): """We use the Employee constructor to convert a dictionary into instance attributes.""" for k, v in employee_attributes.items(): setattr(self, k, v) def clean_phone_number(self): """Perform some rudimentary checks and corrections, to make sure numbers are in the right format. Numbers should be in the form 0XYYYYYYYY, where X is the area code, and Y is the local number.""" if self.telephoneNumber is None or self.telephoneNumber == '': return '', 'Missing phone number.' else: standard_format = re.compile(r'^\+(?P<intl_prefix>\d{2})\((?P<area_code>\d)\)(?P<local_first_half>\d{4})-(?P<local_second_half>\d{4})') extra_zero = re.compile(r'^\+(?P<intl_prefix>\d{2})\(0(?P<area_code>\d)\)(?P<local_first_half>\d{4})-(?P<local_second_half>\d{4})') missing_hyphen = re.compile(r'^\+(?P<intl_prefix>\d{2})\(0(?P<area_code>\d)\)(?P<local_first_half>\d{4})(?P<local_second_half>\d{4})') if standard_format.search(self.telephoneNumber): result = standard_format.search(self.telephoneNumber) return '0' + result.group('area_code') + result.group('local_first_half') + result.group('local_second_half'), '' elif extra_zero.search(self.telephoneNumber): result = extra_zero.search(self.telephoneNumber) return '0' + result.group('area_code') + result.group('local_first_half') + result.group('local_second_half'), 'Extra zero in area code - ask user to remediate. ' elif missing_hyphen.search(self.telephoneNumber): result = missing_hyphen.search(self.telephoneNumber) return '0' + result.group('area_code') + result.group('local_first_half') + result.group('local_second_half'), 'Missing hyphen in local component - ask user to remediate. ' else: return '', "Number didn't match recognised format. Original text is: " + self.telephoneNumber class Employees: def __init__(self, import_list): self.employee_list = [] for employee in import_list: self.employee_list.append(Employee(employee)) def clean_all_phone_numbers(self): for employee in self.employee_list: #Should we just set this directly in Employee.clean_phone_number() instead? employee.PHFull, employee.PHFull_message = employee.clean_phone_number() # Hmm, the search is O(n^2) - there's probably a better way of doing this search? def lookup_all_supervisors(self): for employee in self.employee_list: if employee.hrreportsto is not None and employee.hrreportsto != '': for supervisor in self.employee_list: if supervisor.hrid == employee.hrreportsto: (employee.SupervisorEmail, employee.SupervisorFirstName, employee.SupervisorSurname) = supervisor.mail, supervisor.givenName, supervisor.sn break else: (employee.SupervisorEmail, employee.SupervisorFirstName, employee.SupervisorSurname) = ('Supervisor not found.', 'Supervisor not found.', 'Supervisor not found.') else: (employee.SupervisorEmail, employee.SupervisorFirstName, employee.SupervisorSurname) = ('Supervisor not set.', 'Supervisor not set.', 'Supervisor not set.') #Is thre a more pythonic way of doing this? def print_employees(self): for employee in self.employee_list: print(employee.__dict__) if __name__ == '__main__': db_employees = Employees(import_gd_dump()) db_employees.clean_all_phone_numbers() db_employees.lookup_all_supervisors() #db_employees.print_employees() write_gd_formatted(db_employees) Firstly, my preamble question is, can you see anything inherently wrong with the above, from either a class design or Python point-of-view? Is the logic/design sound? Anyhow, to the specifics: The Employees object has a method, clean_all_phone_numbers(), which calls clean_phone_number() on each Employee object inside it. Is this bad design? If so, why? Also, is the way I'm calling lookup_all_supervisors() bad? Originally, I wrapped the clean_phone_number() and lookup_supervisor() method in a single function, with a single for-loop inside it. clean_phone_number is O(n), I believe, lookup_supervisor is O(n^2) - is it ok splitting it into two loops like this? In clean_all_phone_numbers(), I'm looping on the Employee objects, and settings their values using return/assignment - should I be setting this inside clean_phone_number() itself? There's also a few things that I'm sorted of hacked out, not sure if they're bad practice - e.g. print_employee() and gd_formatted() both use __dict__, and the constructor for Employee uses setattr() to convert a dictionary into instance attributes. I'd value any thoughts at all. If you think the questions are too broad, let me know and I can repost as several split up (I just didn't want to pollute the boards with multiple similar questions, and the three questions are more or less fairly tightly related). Cheers, Victor

  Read the article

• SetWindowHookEx and execution blocking

  - by Kalaz

  Hello, I just wonder... I mainly use .NET but now I started to investigate WINAPI calls. For example I am using this piece of code to hook to the API functions. It starts freezing, when I try to debug the application... using System; using System.Diagnostics; using System.Runtime.InteropServices; using System.Threading; using System.Windows.Forms; public class Keyboard { private const int WH_KEYBOARD_LL = 13; private const int WM_KEYDOWN = 0x0100; private static LowLevelKeyboardProc _proc = HookCallback; private static IntPtr _hookID = IntPtr.Zero; public static event Action<Keys,bool, bool> KeyDown; public static void Hook() { new Thread(new ThreadStart(()=> { _hookID = SetHook(_proc); Application.Run(); })).Start(); } public static void Unhook() { UnhookWindowsHookEx(_hookID); } private static IntPtr SetHook(LowLevelKeyboardProc proc) { using (Process curProcess = Process.GetCurrentProcess()) using (ProcessModule curModule = curProcess.MainModule) { return SetWindowsHookEx(WH_KEYBOARD_LL, proc, GetModuleHandle(curModule.ModuleName), 0); } } private delegate IntPtr LowLevelKeyboardProc( int nCode, IntPtr wParam, IntPtr lParam); private static IntPtr HookCallback( int nCode, IntPtr wParam, IntPtr lParam) { if (nCode >= 0 && wParam == (IntPtr)WM_KEYDOWN) { int vkCode = Marshal.ReadInt32(lParam); Keys k = (Keys) vkCode; if (KeyDown != null) { KeyDown.BeginInvoke(k, IsKeyPressed(VirtualKeyStates.VK_CONTROL), IsKeyPressed(VirtualKeyStates.VK_SHIFT),null,null); } } return CallNextHookEx(_hookID, nCode, wParam, lParam); } private static bool IsKeyPressed(VirtualKeyStates virtualKeyStates) { return (GetKeyState(virtualKeyStates) & (1 << 7))==128; } [DllImport("user32.dll", CharSet = CharSet.Auto, SetLastError = true)] private static extern IntPtr SetWindowsHookEx(int idHook, LowLevelKeyboardProc lpfn, IntPtr hMod, uint dwThreadId); [DllImport("user32.dll", CharSet = CharSet.Auto, SetLastError = true)] [return: MarshalAs(UnmanagedType.Bool)] private static extern bool UnhookWindowsHookEx(IntPtr hhk); [DllImport("user32.dll", CharSet = CharSet.Auto, SetLastError = true)] private static extern IntPtr CallNextHookEx(IntPtr hhk, int nCode, IntPtr wParam, IntPtr lParam); [DllImport("kernel32.dll", CharSet = CharSet.Auto, SetLastError = true)] private static extern IntPtr GetModuleHandle(string lpModuleName); [DllImport("user32.dll")] static extern short GetKeyState(VirtualKeyStates nVirtKey); } enum VirtualKeyStates : int { VK_LBUTTON = 0x01, VK_RBUTTON = 0x02, VK_CANCEL = 0x03, VK_MBUTTON = 0x04, // VK_XBUTTON1 = 0x05, VK_XBUTTON2 = 0x06, // VK_BACK = 0x08, VK_TAB = 0x09, // VK_CLEAR = 0x0C, VK_RETURN = 0x0D, // VK_SHIFT = 0x10, VK_CONTROL = 0x11, VK_MENU = 0x12, VK_PAUSE = 0x13, VK_CAPITAL = 0x14, // VK_KANA = 0x15, VK_HANGEUL = 0x15, /* old name - should be here for compatibility */ VK_HANGUL = 0x15, VK_JUNJA = 0x17, VK_FINAL = 0x18, VK_HANJA = 0x19, VK_KANJI = 0x19, // VK_ESCAPE = 0x1B, // VK_CONVERT = 0x1C, VK_NONCONVERT = 0x1D, VK_ACCEPT = 0x1E, VK_MODECHANGE = 0x1F, // VK_SPACE = 0x20, VK_PRIOR = 0x21, VK_NEXT = 0x22, VK_END = 0x23, VK_HOME = 0x24, VK_LEFT = 0x25, VK_UP = 0x26, VK_RIGHT = 0x27, VK_DOWN = 0x28, VK_SELECT = 0x29, VK_PRINT = 0x2A, VK_EXECUTE = 0x2B, VK_SNAPSHOT = 0x2C, VK_INSERT = 0x2D, VK_DELETE = 0x2E, VK_HELP = 0x2F, // VK_LWIN = 0x5B, VK_RWIN = 0x5C, VK_APPS = 0x5D, // VK_SLEEP = 0x5F, // VK_NUMPAD0 = 0x60, VK_NUMPAD1 = 0x61, VK_NUMPAD2 = 0x62, VK_NUMPAD3 = 0x63, VK_NUMPAD4 = 0x64, VK_NUMPAD5 = 0x65, VK_NUMPAD6 = 0x66, VK_NUMPAD7 = 0x67, VK_NUMPAD8 = 0x68, VK_NUMPAD9 = 0x69, VK_MULTIPLY = 0x6A, VK_ADD = 0x6B, VK_SEPARATOR = 0x6C, VK_SUBTRACT = 0x6D, VK_DECIMAL = 0x6E, VK_DIVIDE = 0x6F, VK_F1 = 0x70, VK_F2 = 0x71, VK_F3 = 0x72, VK_F4 = 0x73, VK_F5 = 0x74, VK_F6 = 0x75, VK_F7 = 0x76, VK_F8 = 0x77, VK_F9 = 0x78, VK_F10 = 0x79, VK_F11 = 0x7A, VK_F12 = 0x7B, VK_F13 = 0x7C, VK_F14 = 0x7D, VK_F15 = 0x7E, VK_F16 = 0x7F, VK_F17 = 0x80, VK_F18 = 0x81, VK_F19 = 0x82, VK_F20 = 0x83, VK_F21 = 0x84, VK_F22 = 0x85, VK_F23 = 0x86, VK_F24 = 0x87, // VK_NUMLOCK = 0x90, VK_SCROLL = 0x91, // VK_OEM_NEC_EQUAL = 0x92, // '=' key on numpad // VK_OEM_FJ_JISHO = 0x92, // 'Dictionary' key VK_OEM_FJ_MASSHOU = 0x93, // 'Unregister word' key VK_OEM_FJ_TOUROKU = 0x94, // 'Register word' key VK_OEM_FJ_LOYA = 0x95, // 'Left OYAYUBI' key VK_OEM_FJ_ROYA = 0x96, // 'Right OYAYUBI' key // VK_LSHIFT = 0xA0, VK_RSHIFT = 0xA1, VK_LCONTROL = 0xA2, VK_RCONTROL = 0xA3, VK_LMENU = 0xA4, VK_RMENU = 0xA5, // VK_BROWSER_BACK = 0xA6, VK_BROWSER_FORWARD = 0xA7, VK_BROWSER_REFRESH = 0xA8, VK_BROWSER_STOP = 0xA9, VK_BROWSER_SEARCH = 0xAA, VK_BROWSER_FAVORITES = 0xAB, VK_BROWSER_HOME = 0xAC, // VK_VOLUME_MUTE = 0xAD, VK_VOLUME_DOWN = 0xAE, VK_VOLUME_UP = 0xAF, VK_MEDIA_NEXT_TRACK = 0xB0, VK_MEDIA_PREV_TRACK = 0xB1, VK_MEDIA_STOP = 0xB2, VK_MEDIA_PLAY_PAUSE = 0xB3, VK_LAUNCH_MAIL = 0xB4, VK_LAUNCH_MEDIA_SELECT = 0xB5, VK_LAUNCH_APP1 = 0xB6, VK_LAUNCH_APP2 = 0xB7, // VK_OEM_1 = 0xBA, // ';:' for US VK_OEM_PLUS = 0xBB, // '+' any country VK_OEM_COMMA = 0xBC, // ',' any country VK_OEM_MINUS = 0xBD, // '-' any country VK_OEM_PERIOD = 0xBE, // '.' any country VK_OEM_2 = 0xBF, // '/?' for US VK_OEM_3 = 0xC0, // '`~' for US // VK_OEM_4 = 0xDB, // '[{' for US VK_OEM_5 = 0xDC, // '\|' for US VK_OEM_6 = 0xDD, // ']}' for US VK_OEM_7 = 0xDE, // ''"' for US VK_OEM_8 = 0xDF, // VK_OEM_AX = 0xE1, // 'AX' key on Japanese AX kbd VK_OEM_102 = 0xE2, // "<>" or "\|" on RT 102-key kbd. VK_ICO_HELP = 0xE3, // Help key on ICO VK_ICO_00 = 0xE4, // 00 key on ICO // VK_PROCESSKEY = 0xE5, // VK_ICO_CLEAR = 0xE6, // VK_PACKET = 0xE7, // VK_OEM_RESET = 0xE9, VK_OEM_JUMP = 0xEA, VK_OEM_PA1 = 0xEB, VK_OEM_PA2 = 0xEC, VK_OEM_PA3 = 0xED, VK_OEM_WSCTRL = 0xEE, VK_OEM_CUSEL = 0xEF, VK_OEM_ATTN = 0xF0, VK_OEM_FINISH = 0xF1, VK_OEM_COPY = 0xF2, VK_OEM_AUTO = 0xF3, VK_OEM_ENLW = 0xF4, VK_OEM_BACKTAB = 0xF5, // VK_ATTN = 0xF6, VK_CRSEL = 0xF7, VK_EXSEL = 0xF8, VK_EREOF = 0xF9, VK_PLAY = 0xFA, VK_ZOOM = 0xFB, VK_NONAME = 0xFC, VK_PA1 = 0xFD, VK_OEM_CLEAR = 0xFE } It works well even if you put messagebox into the event or something that blocks execution. But it gets bad if you try to put breakpoint into the event. Why? I mean event is not run in the same thread that the windows hook is. That means that It shouldn't block HookCallback. It does however... I would really like to know why is this happening. My theory is that Visual Studio when breaking execution temporarily stops all threads and that means that HookCallback is blocked... Is there any book or valuable resource that would explain concepts behind all of this threading?

  Read the article

• wglCreateContext in C# failing but not in managed C++

  - by SeeR

  I'm trying to use opengl in C#. I have following code which fails with error 2000 ERROR_INVALID_PIXEL_FORMAT First definitions: [DllImport("user32.dll", CharSet = CharSet.Auto, SetLastError = true, ExactSpelling = true)] public static extern IntPtr GetDC(IntPtr hWnd); [StructLayout(LayoutKind.Sequential)] public struct PIXELFORMATDESCRIPTOR { public void Init() { nSize = (ushort) Marshal.SizeOf(typeof (PIXELFORMATDESCRIPTOR)); nVersion = 1; dwFlags = PFD_FLAGS.PFD_DRAW_TO_WINDOW | PFD_FLAGS.PFD_SUPPORT_OPENGL | PFD_FLAGS.PFD_DOUBLEBUFFER | PFD_FLAGS.PFD_SUPPORT_COMPOSITION; iPixelType = PFD_PIXEL_TYPE.PFD_TYPE_RGBA; cColorBits = 24; cRedBits = cRedShift = cGreenBits = cGreenShift = cBlueBits = cBlueShift = 0; cAlphaBits = cAlphaShift = 0; cAccumBits = cAccumRedBits = cAccumGreenBits = cAccumBlueBits = cAccumAlphaBits = 0; cDepthBits = 32; cStencilBits = cAuxBuffers = 0; iLayerType = PFD_LAYER_TYPES.PFD_MAIN_PLANE; bReserved = 0; dwLayerMask = dwVisibleMask = dwDamageMask = 0; } ushort nSize; ushort nVersion; PFD_FLAGS dwFlags; PFD_PIXEL_TYPE iPixelType; byte cColorBits; byte cRedBits; byte cRedShift; byte cGreenBits; byte cGreenShift; byte cBlueBits; byte cBlueShift; byte cAlphaBits; byte cAlphaShift; byte cAccumBits; byte cAccumRedBits; byte cAccumGreenBits; byte cAccumBlueBits; byte cAccumAlphaBits; byte cDepthBits; byte cStencilBits; byte cAuxBuffers; PFD_LAYER_TYPES iLayerType; byte bReserved; uint dwLayerMask; uint dwVisibleMask; uint dwDamageMask; } [Flags] public enum PFD_FLAGS : uint { PFD_DOUBLEBUFFER = 0x00000001, PFD_STEREO = 0x00000002, PFD_DRAW_TO_WINDOW = 0x00000004, PFD_DRAW_TO_BITMAP = 0x00000008, PFD_SUPPORT_GDI = 0x00000010, PFD_SUPPORT_OPENGL = 0x00000020, PFD_GENERIC_FORMAT = 0x00000040, PFD_NEED_PALETTE = 0x00000080, PFD_NEED_SYSTEM_PALETTE = 0x00000100, PFD_SWAP_EXCHANGE = 0x00000200, PFD_SWAP_COPY = 0x00000400, PFD_SWAP_LAYER_BUFFERS = 0x00000800, PFD_GENERIC_ACCELERATED = 0x00001000, PFD_SUPPORT_DIRECTDRAW = 0x00002000, PFD_DIRECT3D_ACCELERATED = 0x00004000, PFD_SUPPORT_COMPOSITION = 0x00008000, PFD_DEPTH_DONTCARE = 0x20000000, PFD_DOUBLEBUFFER_DONTCARE = 0x40000000, PFD_STEREO_DONTCARE = 0x80000000 } public enum PFD_LAYER_TYPES : byte { PFD_MAIN_PLANE = 0, PFD_OVERLAY_PLANE = 1, PFD_UNDERLAY_PLANE = 255 } public enum PFD_PIXEL_TYPE : byte { PFD_TYPE_RGBA = 0, PFD_TYPE_COLORINDEX = 1 } [DllImport("gdi32.dll", CharSet = CharSet.Auto, SetLastError = true, ExactSpelling = true)] public static extern int ChoosePixelFormat(IntPtr hdc, [In] ref PIXELFORMATDESCRIPTOR ppfd); [DllImport("gdi32.dll", CharSet = CharSet.Auto, SetLastError = true, ExactSpelling = true)] public static extern bool SetPixelFormat(IntPtr hdc, int iPixelFormat, ref PIXELFORMATDESCRIPTOR ppfd); [DllImport("opengl32.dll", CharSet = CharSet.Auto, SetLastError = true, ExactSpelling = true)] public static extern IntPtr wglCreateContext(IntPtr hDC); And now the code that fails: IntPtr dc = Win.GetDC(hwnd); var pixelformatdescriptor = new GL.PIXELFORMATDESCRIPTOR(); pixelformatdescriptor.Init(); var pixelFormat = GL.ChoosePixelFormat(dc, ref pixelformatdescriptor); if(!GL.SetPixelFormat(dc, pixelFormat, ref pixelformatdescriptor)) throw new Win32Exception(Marshal.GetLastWin32Error()); IntPtr hglrc; if((hglrc = GL.wglCreateContext(dc)) == IntPtr.Zero) throw new Win32Exception(Marshal.GetLastWin32Error()); //<----- here I have exception the same code in managed C++ is working HDC dc = GetDC(hWnd); PIXELFORMATDESCRIPTOR pf; pf.nSize = sizeof(PIXELFORMATDESCRIPTOR); pf.nVersion = 1; pf.dwFlags = PFD_DRAW_TO_WINDOW | PFD_SUPPORT_OPENGL | PFD_DOUBLEBUFFER | PFD_SUPPORT_COMPOSITION; pf.cColorBits = 24; pf.cRedBits = pf.cRedShift = pf.cGreenBits = pf.cGreenShift = pf.cBlueBits = pf.cBlueShift = 0; pf.cAlphaBits = pf.cAlphaShift = 0; pf.cAccumBits = pf.cAccumRedBits = pf.cAccumGreenBits = pf.cAccumBlueBits = pf.cAccumAlphaBits = 0; pf.cDepthBits = 32; pf.cStencilBits = pf.cAuxBuffers = 0; pf.iLayerType = PFD_MAIN_PLANE; pf.bReserved = 0; pf.dwLayerMask = pf.dwVisibleMask = pf.dwDamageMask = 0; int ipf = ChoosePixelFormat(dc, &pf); SetPixelFormat(dc, ipf, &pf); HGLRC hglrc = wglCreateContext(dc); I've tried it on VIsta 64-bit with ATI graphic card and on Windows XP 32-bit with Nvidia with the same result in both cases. Also I want to mention that I don't want to use any already written framework for it. Can anyone show me where is the bug in C# code that is causing the exception?

  Read the article

• How to compare a memory bits in C++?

  - by Trunet

  Hi, I need help with a memory bit comparison function. I bought a LED Matrix here with 4 x HT1632C chips and I'm using it on my arduino mega2560. There're no code available for this chipset(it's not the same as HT1632) and I'm writing on my own. I have a plot function that get x,y coordinates and a color and that pixel turn on. Only this is working perfectly. But I need more performance on my display so I tried to make a shadowRam variable that is a "copy" of my device memory. Before I plot anything on display it checks on shadowRam to see if it's really necessary to change that pixel. When I enabled this(getShadowRam) on plot function my display has some, just SOME(like 3 or 4 on entire display) ghost pixels(pixels that is not supposed to be turned on). If I just comment the prev_color if's on my plot function it works perfectly. Also, I'm cleaning my shadowRam array setting all matrix to zero. variables: #define BLACK 0 #define GREEN 1 #define RED 2 #define ORANGE 3 #define CHIP_MAX 8 byte shadowRam[63][CHIP_MAX-1] = {0}; getShadowRam function: byte HT1632C::getShadowRam(byte x, byte y) { byte addr, bitval, nChip; if (x>=32) { nChip = 3 + x/16 + (y>7?2:0); } else { nChip = 1 + x/16 + (y>7?2:0); } bitval = 8>>(y&3); x = x % 16; y = y % 8; addr = (x<<1) + (y>>2); if ((shadowRam[addr][nChip-1] & bitval) && (shadowRam[addr+32][nChip-1] & bitval)) { return ORANGE; } else if (shadowRam[addr][nChip-1] & bitval) { return GREEN; } else if (shadowRam[addr+32][nChip-1] & bitval) { return RED; } else { return BLACK; } } plot function: void HT1632C::plot (int x, int y, int color) { if (x<0 || x>X_MAX || y<0 || y>Y_MAX) return; if (color != BLACK && color != GREEN && color != RED && color != ORANGE) return; char addr, bitval; byte nChip; byte prev_color = HT1632C::getShadowRam(x,y); bitval = 8>>(y&3); if (x>=32) { nChip = 3 + x/16 + (y>7?2:0); } else { nChip = 1 + x/16 + (y>7?2:0); } x = x % 16; y = y % 8; addr = (x<<1) + (y>>2); switch(color) { case BLACK: if (prev_color != BLACK) { // compare with memory to only set if pixel is other color // clear the bit in both planes; shadowRam[addr][nChip-1] &= ~bitval; HT1632C::sendData(nChip, addr, shadowRam[addr][nChip-1]); shadowRam[addr+32][nChip-1] &= ~bitval; HT1632C::sendData(nChip, addr+32, shadowRam[addr+32][nChip-1]); } break; case GREEN: if (prev_color != GREEN) { // compare with memory to only set if pixel is other color // set the bit in the green plane and clear the bit in the red plane; shadowRam[addr][nChip-1] |= bitval; HT1632C::sendData(nChip, addr, shadowRam[addr][nChip-1]); shadowRam[addr+32][nChip-1] &= ~bitval; HT1632C::sendData(nChip, addr+32, shadowRam[addr+32][nChip-1]); } break; case RED: if (prev_color != RED) { // compare with memory to only set if pixel is other color // clear the bit in green plane and set the bit in the red plane; shadowRam[addr][nChip-1] &= ~bitval; HT1632C::sendData(nChip, addr, shadowRam[addr][nChip-1]); shadowRam[addr+32][nChip-1] |= bitval; HT1632C::sendData(nChip, addr+32, shadowRam[addr+32][nChip-1]); } break; case ORANGE: if (prev_color != ORANGE) { // compare with memory to only set if pixel is other color // set the bit in both the green and red planes; shadowRam[addr][nChip-1] |= bitval; HT1632C::sendData(nChip, addr, shadowRam[addr][nChip-1]); shadowRam[addr+32][nChip-1] |= bitval; HT1632C::sendData(nChip, addr+32, shadowRam[addr+32][nChip-1]); } break; } } If helps: The datasheet of board I'm using. On page 7 has the memory mapping I'm using. Also, I have a video of display working.

  Read the article

• Problem with GCC calling static templates functions in templated parent class.

  - by Adisak

  I have some code that compiles and runs on MSVC++ but will not compile on GCC. I have made a test snippet that follows. My goal was to move the static method from BFSMask to BFSMaskSized. Can someone explain what is going on with the errors (esp. the weird 'operator<' error)? Thank you. In the case of both #defines are 0, then the code compiles on GCC. #define DOESNT_COMPILE_WITH_GCC 0 #define FUNCTION_IN_PARENT 0 I get errors if I change either #define to 1. Here are the errors I see. #define DOESNT_COMPILE_WITH_GCC 0 #define FUNCTION_IN_PARENT 1 Test.cpp: In static member function 'static typename Snapper::BFSMask<T>::T_Parent::T_SINT Snapper::BFSMask<T>::Create_NEZ(TCMP)': Test.cpp(492): error: 'CreateMaskFromHighBitSized' was not declared in this scope #define DOESNT_COMPILE_WITH_GCC 1 #define FUNCTION_IN_PARENT 0 Test.cpp: In static member function 'static typename Snapper::BFSMask<T>::T_Parent::T_SINT Snapper::BFSMask<T>::Create_NEZ(TCMP) [with TCMP = int, T = int]': Test.cpp(500): instantiated from 'TVAL Snapper::BFWrappedInc(TVAL, TVAL, TVAL) [with TVAL = int]' Test.cpp(508): instantiated from here Test.cpp(490): error: invalid operands of types '<unresolved overloaded function type>' and 'unsigned int' to binary 'operator<' #define DOESNT_COMPILE_WITH_GCC 1 #define FUNCTION_IN_PARENT 1 Test.cpp: In static member function 'static typename Snapper::BFSMask<T>::T_Parent::T_SINT Snapper::BFSMask<T>::Create_NEZ(TCMP) [with TCMP = int, T = int]': Test.cpp(500): instantiated from 'TVAL Snapper::BFWrappedInc(TVAL, TVAL, TVAL) [with TVAL = int]' Test.cpp(508): instantiated from here Test.cpp(490): error: invalid operands of types '<unresolved overloaded function type>' and 'unsigned int' to binary 'operator<' Here is the code namespace Snapper { #define DOESNT_COMPILE_WITH_GCC 0 #define FUNCTION_IN_PARENT 0 // MASK TYPES // NEZ - Not Equal to Zero #define BFSMASK_NEZ(A) ( ( A ) | ( 0 - A ) ) #define BFSELECT_MASK(MASK,VTRUE,VFALSE) ( ((MASK)&(VTRUE)) | ((~(MASK))&(VFALSE)) ) template<typename TVAL> TVAL BFSelect_MASK(TVAL MASK,TVAL VTRUE,TVAL VFALSE) { return(BFSELECT_MASK(MASK,VTRUE,VFALSE)); } //----------------------------------------------------------------------------- // Branch Free Helpers template<int BYTESIZE> struct BFSMaskBase {}; template<> struct BFSMaskBase<2> { typedef UINT16 T_UINT; typedef SINT16 T_SINT; }; template<> struct BFSMaskBase<4> { typedef UINT32 T_UINT; typedef SINT32 T_SINT; }; template<int BYTESIZE> struct BFSMaskSized : public BFSMaskBase<BYTESIZE> { static const int SizeBytes = BYTESIZE; static const int SizeBits = SizeBytes*8; static const int MaskShift = SizeBits-1; typedef typename BFSMaskBase<BYTESIZE>::T_UINT T_UINT; typedef typename BFSMaskBase<BYTESIZE>::T_SINT T_SINT; #if FUNCTION_IN_PARENT template<int N> static T_SINT CreateMaskFromHighBitSized(typename BFSMaskBase<N>::T_SINT inmask); #endif }; template<typename T> struct BFSMask : public BFSMaskSized<sizeof(T)> { // BFSMask = -1 (all bits set) typedef BFSMask<T> T_This; // "Import" the Parent Class typedef BFSMaskSized<sizeof(T)> T_Parent; typedef typename T_Parent::T_SINT T_SINT; #if FUNCTION_IN_PARENT typedef T_Parent T_MaskGen; #else typedef T_This T_MaskGen; template<int N> static T_SINT CreateMaskFromHighBitSized(typename BFSMaskSized<N>::T_SINT inmask); #endif template<typename TCMP> static T_SINT Create_NEZ(TCMP A) { //ReDefineType(const typename BFSMask<TCMP>::T_SINT,SA,A); //const typename BFSMask<TCMP>::T_SINT cmpmask = BFSMASK_NEZ(SA); const typename BFSMask<TCMP>::T_SINT cmpmask = BFSMASK_NEZ(A); #if DOESNT_COMPILE_WITH_GCC return(T_MaskGen::CreateMaskFromHighBitSized<sizeof(TCMP)>(cmpmask)); #else return(CreateMaskFromHighBitSized<sizeof(TCMP)>(cmpmask)); #endif } }; template<typename TVAL> TVAL BFWrappedInc(TVAL x,TVAL minval,TVAL maxval) { const TVAL diff = maxval-x; const TVAL mask = BFSMask<TVAL>::Create_NEZ(diff); const TVAL incx = x + 1; return(BFSelect_MASK(mask,incx,minval)); } SINT32 currentsnap = 0; SINT32 SetSnapshot() { currentsnap=BFWrappedInc<SINT32>(currentsnap,0,20); return(currentsnap); } }

  Read the article

• What other tool is using my hotkey?

  - by Sammy

  I use Greenshot for screenshots, and it's been nagging about some other software tool using the same hotkey. I started receiving this warning message about two days ago. It shows up each time I reboot and log on to Windows. The hotkey(s) "Ctrl + Shift + PrintScreen" could not be registered. This problem is probably caused by another tool claiming usage of the same hotkey(s)! You could either change your hotkey settings or deactivate/change the software making use of the hotkey(s). What's this all about? The only software I recently installed is CPU-Z Core Temp Speed Fan HD Tune Epson Print CD NetStress What I would like to know is how to find out what other tool is causing this conflict? Do I really have to uninstall each program, one by one, until there is no conflict anymore? I see no option for customizing any hotkeys in CPU-Z, and according to docs there are only a few keyboard shortcuts. These are F5 through F9, but they are no hotkeys. There is nothing in Core Temp, and from what I can see... nothing in Speed Fan. Is any of these programs known to use Ctrl + Shift + PrintScreen hotkey for screenshots? I am actually suspecting the Dropbox client. I think I saw a warning recently coming from Dropbox program, something to do with hotkeys or keyboard shortcuts. I see that it has an option for sharing screenshots under Preferences menu, but I see no option for hotkeys. Core Temp actually also has an option for taking screenshots (F9) but it's just that - a keyboard shortcut, not a hotkey. And again, there's no option actually for changing this setting in Options/Settings menu. How do you resolve this type of conflicts? Are there any general methods you can use to pinpoint the second conflicting software? Like... is there some Windows registry key that holds the hotkeys? Or is it just down to mere luck and trial and error? Addendum I forgot to mention, when I do use the Ctrl + Shift + PrintScreen hotkey, what happens is that the Greenshot context menu shows up, asking me where I want to save the screenshot. So it appears to be working. But I am still getting the darn warning every time I reboot and log on to Windows?! I actually tried changing the key bindings in Greenshot preferences, but after a reboot it seems to have returned back to the settings I had previously. Update I can't see any hotkey conflicts in the Widnows Hotkey Explorer. The aforementioned hotkey is reserved by Greenshot, and I don't see any other program using the same hotkey binding. But when I went into Greenshot preferences, this is what I discovered. As you can see it's the Greenshot itself that uses the same hotkey twice! I guess that's why no other program was listed above as using this hotkey. But how can Greenshot be so stupid to use the same hotkey more than once? I didn't do this! It's not my fault... I'm not that stupid. This is what it's set to right now: Capture full screen: Ctrl + Skift + Prntscrn Capture window: Alt + Prntscrn Capture region: Ctrl + Prntscrn Capture last region: Skift + Prntscrn Capture Internet Explorer: Ctrl + Skift + Prntscrn And this is my preferred setting: Capture full screen: Prntscrn Capture window: Alt + Prntscrn Capture region: Ctrl + Prntscrn Capture last region: Capture Internet Explorer: I don't use any hotkey for "last region" and IE. But when I set this to my liking, as listed here, Greenshot gives me the same warning message, even as I tab through the hotkey entry fields. Sometimes it even gives me the warning when I just click Cancel button. This is really crazy! On the side note... You might have noticed that I have "update check" set to 0 (zero). This is because, in my experience, Greenshot changes all or only some of my preferences back to default settings whenever it automatically updates to a new version. So I opted to stay off updates to get rid of the problem. It has done so for the past three updates or so. I hoped to receive a new update that would fix the issue, but I think it still reverts back to default settings after each update to a new version, including setting default hotkeys. Update 2 I'll give you just one example of how Greenshot behaves. This is the dialog I have in front of me right now. As you can see, I have removed the last two hotkeys and changed the first one to my own liking. While I was clicking in the fields and removing the two hotkeys I was getting the warning message. So let's say I click in the "capture last region" field. Then I get this: Note that none of the entries include "Ctrl + Shift + PrintScreen" that it's warning about. Now I will change all the hotkeys so I get something like this: So now I'm using QWERTY letters for binding, like Ctrl+Alt+Q, Ctrl+Alt+W and so on. As far as I know no Windows program is using these. While I was clicking through the different fields it was giving me the warning. Now when I try to click OK to save the changes, it once again gives me a warning about "ctrl + shift + printscreen". Update 3 After setting the above key bindings (QWERTY) and saving changes, and then rebooting, the conflict seems to have been resolved. I was then able to set following key bindings. Capture full screen: Prntscrn Capture window: Alt + Prntscrn Capture region: Ctrl + Prntscrn I was not prompted with the warning message this time. Perhaps changing key binding required a system reboot? Sounds far fetched but that appears to be the case. I'm still not sure what caused this conflict, but I know for sure that it started after installing aforementioned programs. It might just have to do with Greenshot itself, and not some other program. Like I said, I know from experience that Greenshot likes to mess with users' settings after each update. I wouldn't be surprised if it was actually silently updated, even though I have specified not to check for updates, then it changed the key bindings back to defaults and caused a conflict with the hotkeys that were registered with the operating system previously. I rarely reboot the system, so that could have added to the conflict. Next time if I see this I will run Hotkey Explorer immediately and see if there is another program causing the conflict.

  Read the article

• Compiler error: Variable or field declared void [closed]

  - by ?? ?

  i get some error when i try to run this, could someone please tell me the mistakes, thank you! [error: C:\Users\Ethan\Desktop\Untitled1.cpp In function `int main()': 25 C:\Users\Ethan\Desktop\Untitled1.cpp variable or field `findfactors' declared void 25 C:\Users\Ethan\Desktop\Untitled1.cpp initializer expression list treated as compound expression] #include<iostream> #include<cmath> using namespace std; void prompt(int&, int&, int&); int gcd(int , int , int );//3 input, 3 output void findfactors(int , int , int, int, int&, int&);//3 input, 2 output void display(int, int, int, int, int);//5 inputs int main() { int a, b, c; //The coefficients of the quadratic polynomial int ag, bg, cg;//value of a, b, c after factor out gcd int f1, f2; //The two factors of a*c which add to be b int g; //The gcd of a, b, c prompt(a, b, c);//Call the prompt function g=gcd(a, b, c);//Calculation of g void findfactors(a, b, c, f1, f2);//Call findFactors on factored polynomial display(g, f1, f2, a, c);//Call display function to display the factored polynomial system("PAUSE"); return 0; } void prompt(int& num1, int& num2, int& num3) //gets 3 ints from the user { cout << "This program factors polynomials of the form ax^2+bx+c."<<endl; while(num1==0) { cout << "Enter a value for a: "; cin >> num1; if(num1==0) { cout<< "a must be non-zero."<<endl; } } while(num2==0 && num3==0) { cout << "Enter a value for b: "; cin >> num2; cout << "Enter a value for c: "; cin >> num3; if(num2==0 && num3==0) { cout<< "b and c cannot both be 0."<<endl; } } } int gcd(int num1, int num2, int num3) { int k=2, gcd=1; while (k<=num1 && k<=num2 && k<=num3) { if (num1%k==0 && num2%k==0 && num3%k==0) gcd=k; k++; } return gcd; } void findFactors(int Ag, int Bg, int Cg,int& F1, int& F2) { int y=Ag*Cg; int z=sqrt(abs(y)); for(int i=-z; i<=z; i++) //from -sqrt(|y|) to sqrt(|y|) { if(i==0)i++; //skips 0 if(y%i==0) //if i is a factor of y { if(i+y/i==Bg) //if i and its partner add to be b F1=i, F2=y/i; else F1=0, F2=0; } } } void display(int G, int factor1, int factor2, int A, int C) { int k=2, gcd1=1; while (k<=A && k<=factor1) { if (A%k==0 && factor1%k==0) gcd1=k; k++; } int t=2, gcd2=1; while (t<=factor2 && t<=C) { if (C%t==0 && factor2%t==0) gcd2=t; t++; } cout<<showpos<<G<<"*("<<gcd1<<"x"<<gcd2<<")("<<A/gcd1<<"x"<<C/gcd2<<")"<<endl; }

  Read the article

• Backing up my data causes my server to crash using Symantec Backup Exec 12, or How I Came to Loathe Irony

  - by Kyle Noland

  I have a Dell PowerEdge 2850 running Windows Server 2003. It is the primary file server for one of my clients. I have another server also running Windows Server 2003 that acts as the core media server for Symantec Backup Exec 12. I recently upgraded from Backup Exec 11d to 12. This upgrade was necessary because we also just upgraded from Exchange 2003 to Exchange 2007. After the upgrade I had to push-install the new version 12 Backup Exec Remote Agents to each of the servers I am backing up (about 6 total). 5 of my servers are doing just fine, faithfully completing backups every night. My file server routinely crashes. Observations: When the server crashes, it does not blue screen, it just locks up completely. Even the mouse is unresponsive. If you leave the server locked up long enough, it will eventually reboot itself and hang on the Windows splash screen. There is absolutely zero useful Event Viewer evidence of a problem. The logs go from routine logging to an Unexplained Shutdown Event the next morning when I have to hard reset the server to get it to boot. 90% of the time the server does not boot cleanly, it hangs on the Windows splash screen. I don't have any light to shed here. When the server hangs all I can do is hard reset it and try again. Even after a successful boot and chkdsk /r operation, if you reboot the machine, you have a 90% chance it won't back up again cleanly. The back story: This server started crashing during nightly backups about a month ago. I tried everything I could think of to troubleshoot the problem and eventually had to give up because I could not keep coming to the office at 4 AM to try to get the server back online. One Friday I got lucky and the server stayed up for its entire full backup. I took this opportunity to restore the full backup to a temporary server I set up and switched all my users to the temporary. Then I reloaded the ailing file server. I kept all my users on the temporary file server for about 3 weeks. I installed the same Backup Exec Remote Agent and Trend Micro A/V client on the temporary server that I was using on the regular file server. During this time, I had absolutely no problems backing up the temporary server. I tested the reloaded file server extensively. I rebooted the server once an hour every day for 3 weeks trying to make it fail. It never did. I felt confident that the reload was the answer to my problems. I moved all of the data from the temporary server back to the regular server. I got 3 nightly backups out of it before it locked up again and started the familiar failure to boot cleanly behavior. This weekend I decided to monitor the file server through the entire backup job. I RDPd into the file server and also into the server running Backup Exec. On the file server I opened the Task Manager so I could view the processes and watch CPU and memory usage. Everything was running smoothly for about 60GB worth of backup. Then I noticed that the byte count of the backup job in Backup Exec had stopped progressing. I looked back over at my RDP session into the file server, and I was getting real time updates about CPU and memory usage still - both nearly 0%, which is unusual. Backups usually hover around 40% usage for the duration of the backup job. Let me reiterate this point: The screen was refreshing and I was getting real time Task Manager updates - until I clicked on the Start menu. The screen went black and the server locked up. In truth, I think the server had already locked up, the video card just hadn't figured it out yet. I went back into my bag of trick: driving to the office and hard reseting the server over and over again when it hangs up at the Windows splash screen. I did this for 2 hours without getting a successful boot. I started panicking because I did not have a decent backup to use to get everything back onto the working temporary file server. Once I exhausted everything I knew to do, I took a deep breath, booted to the Windows Server 2003 CD and performed a repair installation of Windows. The server came back up fine, with all of my data intact. I can now reboot the server at will and it will come back up cleanly. The problem is that I'm afraid as soon as I try to back that data up again I will back at square one. So let me sum things up: Here is what I've done so far to troubleshoot this server: Deleted and recreated the RAID 5 sets. Initialized the drives. Reloaded the server with a fresh Server 2003 install. Confirmed with Dell that I have installed the latest, Dell approved BIOS and NIC drivers. Uninstalled / reinstalled the Backup Exec Remote Agent. Uninstalled the Trend Micro A/V client. Configured the server not to reboot itself after a blue screen so I can see any stop error. I used to think the server was blue screening, but since I enabled this setting I now know that the server just completely locks up. Run chkdsk /r from the Windows Recovery Console. Several errors were found and corrected, but did not help my problem. Help confirm or deny the following assumptions: There are two problems at work here. Why the server is locking up in the first place, and why the server won't boot cleanly after a lockup. This is ultimately a software problem. The server works fine and can be rebooted cleanly all day long - until the first lockup - following a fresh OS load or even a Repair installation. This is not a problem with Backup Exec in general. All of my other servers back up just fine. For the record, all of the other servers run Server 2003, and some of them house more data than the file server in question here. Any help is appreciated. The irony is almost too much to bear. Backing up my data is what is jeopardizing it.

  Read the article

• jQuery Validation plugin: prompt for override

  - by Sam Carleton

  I have a jQuery form that has validation of a sort. It is a data entry screen with two 'recommend ranges', one is 36-84, the other 50-300. The business rules call for the values to be either blank or greater than zero, but to prompt for confirmation if the values are outside of the range listed above. I have seen some other threads that talk about setting the class="cancel" on the submit button. From what I can tell, this will simply disable the validation. I need to prompt for a "do you want to continue, yes or no?" and if no stop the submit, if yes, continue. Below is an example from the book Pro jQuery. By default the top row needs to be between 10 and 20 to submit. How would you change it so that it prompts you and if you say Yes it submits, no prevents the submit: <!DOCTYPE html> <html> <head> <title>Example</title> <script src="jquery-1.7.js" type="text/javascript"></script> <script src="jquery.tmpl.js" type="text/javascript"></script> <script src="jquery.validate.js" type="text/javascript"></script> <style type="text/css"> h1 { min-width: 70px; border: thick double black; margin-left: auto; margin-right: auto; text-align: center; font-size: x-large; padding: .5em; color: darkgreen; background-image: url("border.png"); background-size: contain; margin-top: 0; } .dtable {display: table;} .drow {display: table-row;} .dcell {display: table-cell; padding: 10px;} .dcell > * {vertical-align: middle} input {width: 2em; text-align: right; border: thin solid black; padding: 2px;} label {width: 5em; padding-left: .5em; display: inline-block;} #buttonDiv {text-align: center;} #oblock {display: block; margin-left: auto; margin-right: auto; min-width: 700px; } div.errorMsg {color: red} .invalidElem {border: medium solid red} </style> <script type="text/javascript"> $(document).ready(function() { var data = [ { name: "Astor", product: "astor", stocklevel: "10", price: "2.99"}, { name: "Daffodil", product: "daffodil", stocklevel: "12", price: "1.99"}, { name: "Rose", product: "rose", stocklevel: "2", price: "4.99"}, { name: "Peony", product: "peony", stocklevel: "0", price: "1.50"}, { name: "Primula", product: "primula", stocklevel: "1", price: "3.12"}, { name: "Snowdrop", product: "snowdrop", stocklevel: "15", price: "0.99"}, ]; var templResult = $('#flowerTmpl').tmpl(data); templResult.slice(0, 3).appendTo('#row1'); templResult.slice(3).appendTo("#row2"); $('form').validate({ highlight: function(element, errorClass) { $(element).add($(element).parent()).addClass("invalidElem"); }, unhighlight: function(element, errorClass) { $(element).add($(element).parent()).removeClass("invalidElem"); }, errorElement: "div", errorClass: "errorMsg" }); $.validator.addClassRules({ flowerValidation: { required: true, min: 0, max: 100, digits: true, } }) $('#row1 input').each(function(index, elem) { $(elem).rules("add", { min: 10, max: 20 }) }); $('input').addClass("flowerValidation").change(function(e) { $('form').validate().element($(e.target)); }); }); </script> <script id="flowerTmpl" type="text/x-jquery-tmpl"> <div class="dcell"> <img src="${product}.png"/> <label for="${product}">${name}: </label> <input name="${product}" value="0" required /> </div> </script> </head> <body> <h1>Jacqui's Flower Shop</h1> <form method="post" action="http://node.jacquisflowershop.com/order"> <div id="oblock"> <div class="dtable"> <div id="row1" class="drow"> </div> <div id="row2"class="drow"> </div> </div> </div> <div id="buttonDiv"><button type="submit">Place Order</button></div> </form> </body> </html>

  Read the article

• The impossible inline Javascript delay/sleep

  - by trex005

  There is a JavaScript function, of which I have zero control of the code, which calls a function that I wrote. My function uses DOM to generate an iFrame, defines it's src and then appends it to another DOM element. However, before my function returns, and thus allows continued execution of the containing function, it is imperative that the iFrame be fully loaded. Here are the things that I have tried and why they do not work : 1. The SetTimeout option : 99.999% of the time, this is THE answer. As a matter of fact, in the past decade that I have been mentoring in JavaScript, I have always insisted that code could always be refactored to use this option, and never believed a scenario existed where that was not the case. Well, I finally found one! The problem is that because my function is being called inline, if the very next line is executed before my iFrame finishes loading, it totally neuters my script, and since the moment my script completes, the external script continues. A callback of sorts will not work 2. The "Do nothing" loop :This option you use while(//iFrame is not loaded){//do nothing}. In theory this would not return until the frame is loaded. The problem is that since this hogs all the resources, the iFrame never loads. This trick, although horribly unprofessional, dirty etc. will work when you just need an inline delay, but since I require an external thread to complete, it will not.In FF, after a few seconds, it pauses the script and an alert pops up stating that there is an unresponsive script. While that alert is up, the iFrame is able to load, and then my function is able to return, but having the browser frozen for 10 seconds, and then requiring the user to correctly dismiss an error is a no go. 3. The model dialogue : I was inspired by the fact that the FF popup allowed the iFrame to load while halting the execution of the function, and thinking about it, I realized that it is because the modal dialogue, is a way of halting execution yet allowing other threads to continue! Brilliant, so I decided to try other modal options. Things like alert() work beautifully! When it pops up, even if only up for 1/10th of a second, the iFrame is able to complete, and all works great. And just in case the 1/10 of a second is not sufficient, I can put the model dialogue in the while loop from solution 2, and it would ensure that the iFrame is loaded in time. Sweet right? Except for the fact that I now have to pop up a very unprofessional dialogue for the user to dismiss in order to run my script. I fought with myself about this cost/benefit of this action, but then I encountered a scenario where my code was called 10 times on a single page! Having to dismiss 10 alerts before acessing a page?! That reminds me of the late 90s script kiddie pages, and is NOT an option. 4. A gazillion other delay script out there:There are about 10 jQuery delay or sleep functions, some of them actually quite cleverly developed, but none worked. A few prototype options, and again, none I found could do it! A dozen or so other libraries and frameworks claimed they had what I needed, but alas they all conspired to give me false hope. I am convinced that since a built in model dialogue can halt execution, while allowing other threads to continue, there must be some code accessible way to do the same thing with out user input. The Code is literally thousands upon thousands of lines and is proprietary, so I wrote this little example of the problem for you to work with. It is important to note the ONLY code you are able to change is in the onlyThingYouCanChange function Test File : <html> <head> </head> </html> <body> <div id='iFrameHolder'></div> <script type='text/javascript'> function unChangeableFunction() { new_iFrame = onlyThingYouCanChange(document.getElementById('iFrameHolder')); new_iFrame_doc = (new_iFrame.contentWindow || new_iFrame.contentDocument); if(new_iFrame_doc.document)new_iFrame_doc=new_iFrame_doc.document; new_iFrame_body = new_iFrame_doc.body; if(new_iFrame_body.innerHTML != 'Loaded?') { //The world explodes!!! alert('you just blew up the world! Way to go!'); } else { alert('wow, you did it! Way to go!'); } } var iFrameLoaded = false; function onlyThingYouCanChange(objectToAppendIFrameTo) { iFrameLoaded = false; iframe=document.createElement('iframe'); iframe.onload = new Function('iFrameLoaded = true'); iframe.src = 'blank_frame.html'; //Must use an HTML doc on the server because there is a very specific DOM structure that must be maintained. objectToAppendIFrameTo.appendChild(iframe); var it = 0; while(!iFrameLoaded) //I put the limit on here so you don't { //If I was able to put some sort of delay here that paused the exicution of the script, but did not halt all other browser threads, and did not require user interaction we'd be golden! //alert('test'); //This would work if it did not require user interaction! } return iframe; } unChangeableFunction(); </script> </body> blank_frame.html : <html> <head> </head> <body style='margin:0px'>Loaded?</body> </html>

  Read the article

• Nagios plugin script not working as expected

  - by Linker3000

  I have modified an off-the-shelf Nagios plugin perl script to (in theory) return a one or zero according to the existence, or not, of a file on a remote linux server. The script runs a remote ssh session and logs in as the nagios user. The remote linux servers have private keys setup for that user, and on the bash command line the script works as expected, but when run as a plugin it always returns '1' (true) even if the file does not exist. Some help with the logic or a comment on why things are not working as expected within Nagios would be appreciated. I'd prefer to use this ssh login method rather than having to install nrpe on all the linux servers. To run from a command line (assuming remote server has a user called nagios with a valid private key): ./check_reboot_required -e ssh -H remote-servers-ip-addr -p 'filename-to-check' -v Ta. #! /usr/bin/perl -w # # # License Information: # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. # ############################################################################ use POSIX; use strict; use Getopt::Long; use lib "/usr/lib/nagios/plugins" ; use vars qw($host $opt_V $opt_h $opt_v $verbose $PROGNAME $pattern $opt_p $mmin $opt_e $opt_t $opt_H $status $state $msg $msg_q $MAILQ $SHELL $device $used $avail $percent $fs $blocks $CMD $RMTOS); use utils qw(%ERRORS &print_revision &support &usage ); sub print_help (); sub print_usage (); sub process_arguments (); $ENV{'PATH'}=''; $ENV{'BASH_ENV'}=''; $ENV{'ENV'}=''; $PROGNAME = "check_reboot_required"; Getopt::Long::Configure('bundling'); $status = process_arguments(); if ($status){ print "ERROR: processing arguments\n"; exit $ERRORS{'UNKNOWN'}; } $SIG{'ALRM'} = sub { print ("ERROR: timed out waiting for $CMD on $host\n"); exit $ERRORS{'WARNING'}; }; $host = $opt_H; $pattern = $opt_p; print "Pattern >" . $pattern . "< " if $verbose; alarm($opt_t); #$CMD = "/usr/bin/find " . $pattern . " -type f 2>/dev/null| /usr/bin/wc -l"; $CMD = "[ -f " . $pattern . " ] && echo 1 || echo 0"; alarm($opt_t); ## get cmd output from remote system if (! open (OUTPUT, "$SHELL $host $CMD|" ) ) { print "ERROR: could not open $CMD on $host\n"; exit $ERRORS{'UNKNOWN'}; } my $perfdata = ""; my $state = "3"; my $msg = "Indeterminate result"; # only first line is relevant in this iteration. while (<OUTPUT>) { my $result = chomp($_); $msg = $result; print "Shell returned >" . $result . "< length is " . length($result) . " " if $verbose; if ( $result == 1 ) { $msg = "Reboot required (NB: Result still not accurate)" . $result ; $state = $ERRORS{'WARNING'}; last; } elsif ( $result == 0 ) { $msg = "No reboot required (NB: Result still not accurate) " . $result ; $state = $ERRORS{'OK'}; last; } else { $msg = "Output received, but it was neither a 1 nor a 0" ; last; } } close (OUTPUT); print "$msg | $perfdata\n"; exit $state; ##################################### #### subs sub process_arguments(){ GetOptions ("V" => \$opt_V, "version" => \$opt_V, "v" => \$opt_v, "verbose" => \$opt_v, "h" => \$opt_h, "help" => \$opt_h, "e=s" => \$opt_e, "shell=s" => \$opt_e, "p=s" => \$opt_p, "pattern=s" => \$opt_p, "t=i" => \$opt_t, "timeout=i" => \$opt_t, "H=s" => \$opt_H, "hostname=s" => \$opt_H ); if ($opt_V) { print_revision($PROGNAME,'$Revision: 1.0 $ '); exit $ERRORS{'OK'}; } if ($opt_h) { print_help(); exit $ERRORS{'OK'}; } if (defined $opt_v ){ $verbose = $opt_v; } if (defined $opt_e ){ if ( $opt_e eq "ssh" ) { if (-x "/usr/local/bin/ssh") { $SHELL = "/usr/local/bin/ssh"; } elsif ( -x "/usr/bin/ssh" ) { $SHELL = "/usr/bin/ssh"; } else { print_usage(); exit $ERRORS{'UNKNOWN'}; } } elsif ( $opt_e eq "rsh" ) { $SHELL = "/usr/bin/rsh"; } else { print_usage(); exit $ERRORS{'UNKNOWN'}; } } else { print_usage(); exit $ERRORS{'UNKNOWN'}; } unless (defined $opt_t) { $opt_t = $utils::TIMEOUT ; # default timeout } unless (defined $opt_H) { print_usage(); exit $ERRORS{'UNKNOWN'}; } return $ERRORS{'OK'}; } sub print_usage () { print "Usage: $PROGNAME -e <shell> -H <hostname> -p <directory/file pattern> [-t <timeout>] [-v verbose]\n"; } sub print_help () { print_revision($PROGNAME,'$Revision: 0.1 $'); print "\n"; print_usage(); print "\n"; print " Checks for the presence of a 'reboot-required' file on a remote host via SSH or RSH\n"; print "-e (--shell) = ssh or rsh (required)\n"; print "-H (--hostname) = remote server name (required)"; print "-p (--pattern) = File pattern for find command (default = /var/run/reboot-required)\n"; print "-t (--timeout) = Plugin timeout in seconds (default = $utils::TIMEOUT)\n"; print "-h (--help)\n"; print "-V (--version)\n"; print "-v (--verbose) = debugging output\n"; print "\n\n"; support(); }

  Read the article

• Preventing FIN_WAIT2 when closing socket

  - by patrickvacek

  I have a server program that connects to another program via a given socket, and in certain cases I need to close the connection and almost immediately re-open it on the same socket. This by and large works, except that I have to wait exactly one minute for the socket to reset. In the meantime, netstat indicates that the server sees the socket in FIN_WAIT2 and the client sees it as CLOSE_WAIT. I'm already using SO_REUSEADDR, which I thought would prevent the wait, but that isn't doing the trick. Setting SO_LINGER to zero also does not help. What else can I do to resolve this? Here are the relevant code snippets: SetUpSocket() { // Set up the socket and listen for a connection from the exelerate client. // Open a TCP/IP socket. m_baseSock = socket(PF_INET, SOCK_STREAM, IPPROTO_IP); if (m_baseSock < 0) { return XERROR; } // Set the socket options to reuse local addresses. int flag = 1; if (setsockopt(m_baseSock, SOL_SOCKET, SO_REUSEADDR, &flag, sizeof(flag)) == -1) { return XERROR; } // Set the socket options to prevent lingering after closing the socket. //~ linger li = {1,0}; //~ if (setsockopt(m_baseSock, SOL_SOCKET, SO_LINGER, &li, sizeof(li)) == -1) //~ { //~ return XERROR; //~ } // Bind the socket to the address of the current host and our given port. struct sockaddr_in addr; memset(&addr, 0, sizeof(addr)); addr.sin_family = AF_INET; addr.sin_addr.s_addr = INADDR_ANY; addr.sin_port = htons(m_port); if (bind(m_baseSock, (struct sockaddr*)&addr, sizeof(addr)) != 0) { return XERROR; } // Tell the socket to listen for a connection from client. if (listen(m_baseSock, 4) != 0) { return XERROR; } return XSUCCESS; } ConnectSocket() { // Add the socket to a file descriptor set. fd_set readfds; FD_ZERO(&readfds); FD_SET(m_baseSock, &readfds); // Set timeout to ten seconds. Plenty of time. struct timeval timeout; timeout.tv_sec = 10; timeout.tv_usec = 0; // Check to see if the socket is ready for reading. int numReady = select(m_baseSock + 1, &readfds, NULL, NULL, &timeout); if (numReady > 0) { int flags = fcntl(m_baseSock, F_GETFL, 0); fcntl(m_baseSock, flags | O_NONBLOCK, 1); // Wait for a connection attempt from the client. Do not block - we shouldn't // need to since we just selected. m_connectedSock = accept(m_baseSock, NULL, NULL); if (m_connectedSock > 0) { m_failedSend = false; m_logout = false; // Spawn a thread to accept commands from client. CreateThread(&m_controlThread, ControlThread, (void *)&m_connectedSock); return XSUCCESS; } } return XERROR; } ControlThread(void *arg) { // Get the socket from the argument. socket sock = *((socket*)arg); while (true) { // Add the socket to a file descriptor set. fd_set readfds; FD_ZERO(&readfds); FD_SET(sock, &readfds); // Set timeout to ten seconds. Plenty of time. struct timeval timeout; timeout.tv_sec = 10; timeout.tv_usec = 0; // Check if there is any readable data on the socket. int num_ready = select(sock + 1, &readfds, NULL, NULL, &timeout); if (num_ready < 0) { return NULL; } // If there is data, read it. else if (num_ready > 0) { // Check the read buffer. xuint8 buf[128]; ssize_t size_read = recv(sock, buf, sizeof(buf)); if (size_read > 0) { // Get the message out of the buffer. char msg = *buf; if (msg == CONNECTED) { // Do some things... } // If we get the log-out message, log out. else if (msg == LOGOUT) { return NULL; } } } } // while return NULL; } ~Server() { // Close the sockets. if (m_baseSock != SOCKET_ERROR) { close(m_baseSock); m_baseSock = SOCKET_ERROR; } if (m_connectedSock != SOCKET_ERROR) { close(m_connectedSock); m_connectedSock = SOCKET_ERROR; } } SOCKET_ERROR is equal to -1. The server object gets destroyed, at which point the connection should close, and then recreated, at which point the SetUpSocket() and ConnectSocket() routines are called. So why do I have to wait a minute for the socket to clear? Any ideas would be appreaciated.

  Read the article

• Assigning two strings together getting Access Read Violation

  - by Jay Bell

  I am trying to pass a string to a class mutator and set the private member to that string here is the code that is sending the string void parseTradePairs(Exchange::Currency *curr, std::string *response, int begin, int exit) { int start; int end; string temp; string dataResponse; CURL *tempCurl; initializeCurl(tempCurl); int location = response->find("marketid", begin); if(location <= exit) { start = location + 11; begin = response->find("label", start); end = begin - start - 3; findStrings(start, end, temp, response); getMarketInfo(tempCurl, temp, dataResponse); curr->_coin->setExch(temp); // here is the line of code that is sending the string dataResponse >> *(curr->_coin); curr->_next = new Exchange::Currency(curr, curr->_position + 1); parseTradePairs(curr->_next, response, begin, exit); } } and here is the mutator within the coin class that is receiving the string and assigning it to _exch void Coin::setExch(string exch) { _exch = exch; } I have stepped through it and made sure that exch has the string in it. "105" but soon as it hits _exch = exch; I get the reading violation. I tried passing as pointer as well. I do not believe it should go out of scope. and the string variable in the class is initialized to zero in the default constructor but again that should matter unless I am trying to read from it instead of writing to it. /* defualt constructor */ Coin::Coin() { _id = ""; _label = ""; _code= ""; _name = ""; _marketCoin = ""; _volume = 0; _last = 0; _exch = ""; } Exchange::Exchange(std::string str) { _exch = str; _currencies = new Currency; std::string pair; std::string response; CURL *curl; initializeCurl(curl); getTradePairs(curl, response); int exit = response.find_last_of("marketid"); parseTradePairs(_currencies, &response, 0, exit); } int main(void) { CURL *curl; string str; string id; Coin coin1; initializeCurl(curl); Exchange ex("cryptsy"); curl_easy_cleanup(curl); system("pause"); return 0; } class Exchange { public: typedef struct Currency { Currency(Coin *coin, Currency *next, Currency *prev, int position) : _coin(coin), _next(next), _prev(prev), _position(position) {} Currency(Currency *prev, int position) : _prev(prev), _position(position), _next(NULL), _coin(&Coin()){} Currency() : _next(NULL), _prev(NULL), _position(0) {} Coin *_coin; Currency *_next; Currency *_prev; int _position; }; /* constructor and destructor */ Exchange(); Exchange(std::string str); ~Exchange(); /* Assignment operator */ Exchange& operator =(const Exchange& copyExchange); /* Parse Cryptsy Pairs */ friend void parseTradePairs(Currency *curr, std::string *response, int begin, int exit); private: std::string _exch; Currency *_currencies; }; here is what i changed it to to fix it. typedef struct Currency { Currency(Coin *coin, Currency *next, Currency *prev, int position) : _coin(coin), _next(next), _prev(prev), _position(position) {} Currency(Currency *prev, int position) : _prev(prev), _position(position), _next(NULL), _coin(&Coin()){} Currency() { _next = NULL; _prev = NULL; _position = 0; _coin = new Coin(); } Coin *_coin; Currency *_next; Currency *_prev; int _position; };

  Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131  | Next Page >