Search Results

Search found 5287 results on 212 pages for 'physical computing'.

Page 127/212 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

• VPN Connection causes DNS to use wrong DNS server

  - by Bryan

  I have a Windows 7 PC on our company network (which is a member of our Active Directory). Everything works fine until I open a VPN connection to a customer's site. When I do connect, I lose network access to shares on the network, including directories such as 'Application Data' that we have a folder redirection policy for. As you can imagine, this makes working on the PC very difficult, as desktop shortcuts stop working, software stops working properly due to having 'Application Data' pulled from under it. Our network is routed (10.58.5.0/24), with other local subnets existing within the scope of 10.58.0.0/16. The remote network is on 192.168.0.0/24. I've tracked the issue down to being DNS related. As soon as I open the VPN tunnel, all my DNS traffic goes via the remote network, which explains the loss of local resources, but my question is, how can I force local DNS queries to go to our local DNS servers rather than our customers? The output of ipconfig /all when not connected to the VPN is below: Windows IP Configuration Host Name . . . . . . . . . . . . : 7k5xy4j Primary Dns Suffix . . . . . . . : mydomain.local Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : mydomain.local Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : mydomain.local Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : F0-4D-A2-DB-3B-CA DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::9457:c5e0:6f10:b298%10(Preferred) IPv4 Address. . . . . . . . . . . : 10.58.5.89(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 31 January 2012 15:55:47 Lease Expires . . . . . . . . . . : 10 February 2012 10:11:30 Default Gateway . . . . . . . . . : 10.58.5.1 DHCP Server . . . . . . . . . . . : 10.58.3.32 DHCPv6 IAID . . . . . . . . . . . : 250629538 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-AC-76-2D-F0-4D-A2-DB-3B-CA DNS Servers . . . . . . . . . . . : 10.58.3.32 10.58.3.33 NetBIOS over Tcpip. . . . . . . . : Enabled This is the output of the same command with the VPN tunnel connected: Windows IP Configuration Host Name . . . . . . . . . . . . : 7k5xy4j Primary Dns Suffix . . . . . . . : mydomain.local Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : mydomain.local PPP adapter Customer Domain: Connection-specific DNS Suffix . : customerdomain.com Description . . . . . . . . . . . : CustomerDomain Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.0.85(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.0.16 192.168.0.17 Primary WINS Server . . . . . . . : 192.168.0.17 NetBIOS over Tcpip. . . . . . . . : Disabled Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : mydomain.local Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : F0-4D-A2-DB-3B-CA DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::9457:c5e0:6f10:b298%10(Preferred) IPv4 Address. . . . . . . . . . . : 10.58.5.89(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 31 January 2012 15:55:47 Lease Expires . . . . . . . . . . : 10 February 2012 10:11:30 Default Gateway . . . . . . . . . : 10.58.5.1 DHCP Server . . . . . . . . . . . : 10.58.3.32 DHCPv6 IAID . . . . . . . . . . . : 250629538 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-AC-76-2D-F0-4D-A2-DB-3B-CA DNS Servers . . . . . . . . . . . : 10.58.3.32 10.58.3.33 NetBIOS over Tcpip. . . . . . . . : Enabled Routing table Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.58.5.1 10.58.5.89 20 10.58.5.0 255.255.255.0 On-link 10.58.5.89 276 10.58.5.89 255.255.255.255 On-link 10.58.5.89 276 10.58.5.255 255.255.255.255 On-link 10.58.5.89 276 91.194.153.42 255.255.255.255 10.58.5.1 10.58.5.89 21 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 192.168.0.95 192.168.0.85 21 192.168.0.85 255.255.255.255 On-link 192.168.0.85 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.58.5.89 276 224.0.0.0 240.0.0.0 On-link 192.168.0.85 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.58.5.89 276 255.255.255.255 255.255.255.255 On-link 192.168.0.85 276 The binding order for the interfaces is as follows: I've not configured the VPN tunnel to use the default gateway at the remote end, and network comms to nodes on both networks are fine. (i.e. I can ping any node on our network or the remote network). I've modified the PPTP connection properties to use the DNS servers 10.58.3.32 followed by 192.168.0.16, yet the query still goes to 192.168.0.16. Edit: The local resources that disappear are hosted on domain DFS roots, which might (or might not) be relevant.

  Read the article

• IT Asset Management

  - by CogitoErgoSum

  Our company has grown quite quickly and I am facing new tasks which I did not think I'd need to deal with. Recently we've come ot a point where we have 100+ Devices (Routers, Bridges, Computers, Laptops, VOIP Phones etc). The other day I was quite frightened when I asked for an inventory and no one had one. I want to start tagging all equipment and recording serials to begin tracking our inventory and ensuring we have a proper record of what equipment we have. Does anyone have advice as to how to go about 1. Convincing the higher ups why we need to do this and 2. What software or strategies might work? Keep in mind this is not for furniture, office equipment etc but IT specific equipment. I'm concerned over people 1. Stealing the physical devices and 2. Losing track of configuration data etc in case we'd need to do a wipe and restore

  Read the article

• Failures when copying between two external drives on the same controller

  - by Krzysztof Kosinski

  I'm encountering a weird problem which is present both on Ubuntu 9.10 and 10.04, on two different machines. When trying to copy between two external drives connected to the same USB controller, the transfer will randomly hang at some random time (after copying 300MB, 1GB, 10GB - it doesn't appear to depend on the dataset being copied). The hang appears to happen faster in 10.04. It appears to happen slower if both drives are connected to a hub. If the drives are connected to 2 distinct physical ports on the machine, the hang will be very fast. Hangs cannot be reproduced if: Data is copied from the first external drive to an internal drive, then to the second external drive Drives are connected to different USB controllers, for example the first one is connected to the built-in controller and the second one via an external PCMCIA controller. lspci says the first machine has an Intel ICH9 USB controller, the second an Intel ICH4. Is this a hardware problem, a kernel problem or a software issue? I used Nautilus when copying the files.

  Read the article

• Multiple WAN interfaces in same subnet on Sonicwall NSA220?

  - by Ttamsen

  (eta salutation, which keeps getting eaten.) Hi, all. I see a bunch of related questions, so I'm hesitant to ask, but: I have a situation where I have a Sonicwall NSA220 serving as firewall/router for two internal subnets to two external WAN connections. In some locations this is two separate ISPs. In others, it's the same ISP but with multiple circuits. The problem is that one ISP has been unable to provide unique subnets for each WAN interface. Is there any possibility that I might be able to bond the two WAN interfaces into a single virtual interface, and then use source-routing to get internal subnets communicating out the appropriate physical interface? Or even just use traffic-shaping to give each internal network appropriate shared bandwidth? I haven't found anything in the docs, but it seemed like it might be worth asking. Thanks for any help! -Steve.

  Read the article

• MySQl Error #1064

  - by 01010011

  Hi, I keep getting this error: MySQL said: #1064 - You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'INSERT INTO books.book(isbn10,isbn13,title,edition,author_f_name,author_m_na' at line 15 with this query: USE books; DROP TABLE IF EXISTS book; CREATE TABLE `books`.`book`( `book_id` INT UNSIGNED NOT NULL AUTO_INCREMENT PRIMARY KEY, `isbn10` VARCHAR(15) NOT NULL, `isbn13` VARCHAR(15) NOT NULL, `title` VARCHAR(50) NOT NULL, `edition` VARCHAR(50) NOT NULL, `author_f_name` VARCHAR(50) NOT NULL, `author_m_name` VARCHAR(50) NOT NULL, `author_l_name` VARCHAR(50) NOT NULL, `cond` ENUM('as new','very good','good','fair','poor') NOT NULL, `price` DECIMAL(8,2) NOT NULL, `genre` VARCHAR(50) NOT NULL, `quantity` INT NOT NULL) INSERT INTO books.book(isbn10,isbn13,title,edition,author_f_name,author_m_name,author_l_name,cond,price,genre,quantity)** VALUES ('0136061699','978-0136061694','Software Engineering: Theory and Practice','4','Shari','Lawrence','Pfleeger','very good','50','Computing','2'); Any idea what the problem is?

  Read the article

• Virtual fiber channel HBA in Solaris

  - by Phil

  We are trying to set up some virtual Fibre Channel HBA's in Solaris. This seems to be possible with NPIV. Creating NPIV's in a Solaris global zone works fine, but passing that NPIV to a zone didn't work at all. We tried to pass the NPIV as following: # zonecfg -z zone1 'info' zonename: studentz1 [...] device: match: /devices/pci@0,0/pci8086,25f9@6/pci8086,350c@0,3/pci1077,140@4/fp@1,0:devctl allow-partition not specified allow-raw-io not specified Wat we want to do is, set up an environment for SAN exercises. We don't have a physical host per student, so we try to virtualise that in some way (Solaris zones or VMware). It should be possible to display the WWN of the virtual HBA and mount the storage presented by the disk subsystem. Any ideas to pass the NPIV to a solaris zone or to virtualise this with vmware?

  Read the article

• Natively boot Virtualbox Image

  - by isync

  I am faced with a Windows hardware/software problem left over from another person. It's on me to resolve. It's a mission critical setup. The situation is: I've got a physical server machine with: -Disk C:\ (one disk) containing a basic install of Windows Server 2008 R2, formerly Win Vista Pro, now gone. -Disk D:\ (software Raid) containing a VirtualBox disk image of a configured Windows Server 2008 R2 running SQL Server R2 among others. What shall I do now? Migrate all the stuff from the configured VM to the basic but natively installed C:\ Windows Server 2008 R2 (with the possibility of breaking stuff)? Or, Setting up the machine to "natively boot" the VM with the help of bcdedit.exe (something I've read about, what I've never done, what I don't know of if it works, if it hits performance, or if it is stable for production) For me, being old skool, I am in the process of de-virtualising everything (option 1). But I'd be happy if someone suggests I am ok to go down the "natively boot" route.

  Read the article

• Issues running java in Solaris 9 container

  - by Matthew Watson

  Hi, I have a solaris 9 container built from a physical server using flarcreate. Everything seems fine, except when trying to trying to run any "java -server" process it fails with the following error This is on a Sunfire T1000 machine running Solaris 10 10/09 s10s_u8wos_08a SPARC Running jdk1.5.0_15 Exception java.lang.OutOfMemoryError: requested -4 bytes for size_t in /BUILD_AREA/jdk1.5.0_15/hotspot/src/os/solaris/vm/os_solaris.cpp. Out of swap space? As far as I can tell I'm not actually out of swap space. Running java in client mode works without a problem. Googles only suggestion is related to x86. Any suggestions? Thanks.

  Read the article

• Mobile Intel® GMA 4500MHD boost

  - by Andy Smith

  My machine has a Mobile Intel® GMA 4500MHD integrated graphics chipset. The machine is currently running 64 bit windows 7 premium with 3GB of ram (1x1gb and 1x2gb). I note that the Mobile Intel® GMA 4500MHD shares the physical memory to process the graphics. now, the total available graphics memory can be up to 1,340 MB with a 32-bit operating system and 3 GB system memory or 1,759 MB with a 64-bit operating system and 4 GB system memory. I am considering investing in a 4GB stick to replace the 1gb stick bringing the total up to 6gb, mainly for an increase in graphics processing ability. Can anyone let me know what sort of power (if any over the 4gb) I could expect by upgrading to 6GB?

  Read the article

• Options for installing software on Amazon EC2 Windows instances

  - by gareth_bowles

  I've been running Linux servers on Amazon EC2 for a while now; the experience has been great. I've recently needed to bring up a Windows server to run some Windows-only software that our product needs to use, and am running into a problem figuring out how to install the software, which is only available on DVD. With Linux I can just install packages from a Web-based repository and take advantage of EC2's fast network throughput, but so far on the Windows instance I've had to upload my ISO images to EC2 and mount them from the Windows EC2 instance. For some reason I'm getting really slow upload speeds to EC2, even though the regular upload speed from our office is pretty good (around 7Mbps). I've also tried mounting the DVD drive on my machine as a local drive on the EC2 instance via Remote Desktop, and then running the software install from the local drive, but I run into the same slow upload speed issue. Does anyone have a better way to install software from physical media onto an EC2 instance ?

  Read the article

• iis 7.5windows 7 error 500.19 error code=0x800700b7

  - by nikhiljoshi

  hi friends i have been trying to resiolve this issue can you guys pls help me for same i am using windows 7 and vs2008 +iis7.5 i have my project stucked pls reply here is what error says Error Summary HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid. Detailed Error Information Module IIS Web Core Notification BeginRequest Handler Not yet determined Error Code 0x800700b7 Config Error There is a duplicate 'system.web.extensions/scripting/scriptResourceHandler' section defined Config File \?\C:\inetpub\wwwroot\test23\web.config Requested URL http://localhost:80/test23 Physical Path C:\inetpub\wwwroot\test23 Logon Method Not yet determined Logon User Not yet determined Config Source 15: 16: 17: i have tried to do the solution given in this site of microsoft http://support.microsoft.com/kb/942055

  Read the article

• ruby: invalid opcode

  - by adamo

  There's a fairly complex application than runs on two VMs (on Xen). Both VMs run CentOS 6.2 with the exact same packages and configuration for every application running (minus networking which is different). SELinux is disabled on both. On machine A the application builds perfectly. On machine B when running some tests we get: ruby[2010] trap invalid opcode ip:7ff9d2944c30 sp:7fff9797e0f8 error:0 in ld-2.12.so[7ff9d2930000+20000] Digging a bit more to find out where the machines differ, machine A has: model name : Six-Core AMD Opteron(tm) Processor 2423 HE and machine B: model name : AMD Opteron(TM) Processor 6272 I've tried booting machine B with cpuid_mask_cpu=fam_10_rev_c in grub but it did not help either. So any advice as to how to deal with this, or how to approach the hosting provider so as to run this VM on another physical machine will be greatly appreciated.

  Read the article

• acessing a subnetwork from within a vm

  - by yan bellavance

  I have a pc running windows 7. I have vmwareplayer running RHEL5 I have 1 physical ethernet connection. this ethernet connection is wired to a hub. there is another device on that hub that needs to be in a certain subnetwork (192.168.0.xxx)(lets call him device X) but the general network is 192.168.1.xxx How can I configure the network adapters so that I can ping device X from RHEL5 in the vm. Originally I could ping google from both windows and rhel (I was in the .1 network) but not device X since he is on a different subnetwork address. Now that I have put it on the .0 I can ping device X from windows but not from rhel5 and cannot access the web. I did this by manually setting the IP address.

  Read the article

• P2V - Cold Clone ISO

  - by jlehtinen

  I need to cold clone a physical box in a VMWare environment. What are people using for this these days? My preference is for VMWare's vConverter ISO, but it appears that this was discontinued. It's no longer available for download on their site from what I can tell (even under old versions). I found one guy who appears to have an ISO for version 3.0.3 of vConverter posted to his site for download, but I'm eternally skeptical about downloading these types of software from random strangers: http://thatcouldbeaproblem.com/?p=584 I also found some mention of using MOA, but I've never used this and have no idea on how effective it is as a vConverter replacement. http://www.sanbarrow.com/moa.html One other options seems to be using Acronis - booting off an Acronis disk to capture a .tib, then using a standard installation of vConverter to push the .tib to ESXi.

  Read the article

• Ubuntu 12 Server messing up my hard disk

  - by Jeroen Jacobs

  I'm installing Ubuntu server on a disk with 12GB available. During the setup, I choose the default LVM-based partition layout. However for some reason, Ubuntu decides that it only wants to use 4GB of this disk. How do I reclaim the remaining space of the hard disk? "lvextent" doesn't work btw... output of df -h: Filesystem Size Used Avail Use% Mounted on /dev/mapper/ubuntu-root 4.3G 3.4G 754M 82% / udev 3.9G 4.0K 3.9G 1% /dev tmpfs 1.6G 756K 1.6G 1% /run none 5.0M 0 5.0M 0% /run/lock none 3.9G 0 3.9G 0% /run/shm /dev/sda1 228M 25M 192M 12% /boot output of pvdisplay: --- Physical volume --- PV Name /dev/sda5 VG Name ubuntu PV Size 12.32 GiB / not usable 2.00 MiB Allocatable yes PE Size 4.00 MiB Total PE 3154 Free PE 8 Allocated PE 3146 PV UUID dD06RZ-kGcL-1tTX-Ruds-XIDG-ssMd-FIUkzZ my partitions: Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 26343423 12920833 5 Extended /dev/sda5 501760 26343423 12920832 8e Linux LVM when I try lvextent, it says there is not enough diskspace.

  Read the article

• Odd Tools and Techniques for System Administrators

  - by Joseph Kern

  There's been a lot of questions centering on Software Tools for System Administrators. But I would like to know about any odd physical tools or techniques that you've used; Something that you never expected to be useful, but ended up saving the day. I'll go first: A Camera Phone. An application server had a major power issue that borked the RAID. Many of the disks were offline. Before I took the plunge and forced disks back online, I took a picture of the RAID BIOS screen with my camera phone. Having the exact layout of the RAID stored safely in my pocket, I was able to reset the RAID, and reboot the server. What odd tools/techniques have you used?

  Read the article

• Is to possible to achieve the SATA II's 3Gbps (375MBps) between home network storage and home computers?

  - by techaddict

  Gigabit ethernet only has 1Gbps (125MBps), whereas SATA II has up to three times that rate. Is it possible to achieve the rate of three times Gigabit ethernet connection which is SATA II speeds, between home network storage and the laptops and desktops with SATA II hard drives? If so, how? Or, is the limitation of a gigabit ethernet port on the laptops the limitng factor, making 1000Gbps the fastest practical transfer speed possible? (practical, meaning that without taking apart the laptop and doing physical modifications like branching a SATA II transfer cable, etc.) -- I just realized -- wouldn't a USB 3.0 cable do the trick? Since USB 3.0 can reach up to 675MBps?

  Read the article

• Server 2008 Hard Faults

  - by claw

  Hey all, plase bear with me as I haven't looked at a server in a very long time. The problem I am having is with a Windows 2008 Standard FE Service Pack 2 Intel Xeon X3430 @ 2.40 2.39 GHZ 4 GB Memory 64 Bit There seems to be no problems other than the physical memory peaking at 91%, always with over 100 Hard Faults Per Second. To my understanding hard faults should be fairly rare on a machine with. Are there any logs I can show you? Or investigate myself. The general performance of the machine is ok, i can access SBS2008 and change settings fairly smoothly without hangs etc. However, we connect to the server and do quite a bit of SQL via an application. For a record to retrieve say 20 rows, it can take 20+ seconds. Thanks in advance, Jamie EDIT: What the server is used for: IIS ASP Web Service SQL 2008 List item Exchange unable to upload screenshots due to low reputation - why doesnt my SO work here :)

  Read the article

• Best practice for system clock sync on KVM host

  - by Tauren

  I have an Ubuntu 9.10 server running as a KVM host with ntpd installed on it. The host system has the correct system time. At the moment I only have a single KVM guest, also Ubuntu 9.10 server. I do not have ntpd installed on it, and I just discovered the clock is about 6 minutes slow. It wasn't that way when it was installed about a month ago. I thought that I only needed to keep the host clock synchronized and that the guests used the host clock. But maybe that is a memory from using OpenVZ. I believe the reasoning was related to only the host could modify the physical system clock. Is running ntpd on both the host and all the guests the correct thing to do? Or is there something else that is preferred? How should I keep the guest clocks in sync?

  Read the article

• trying to connect to non-standard port over esxi guest network

  - by user52874

  I've got an exsi 5.5 box that has a redhat 6.5 guest and a win7 guest. The guest nics are connected on a vsphere standard switch. There is no connection from the vswitch to an outside physical nic. I can ping between the two boxes, each way. I can successfully psping redhat:22 from the win7 box. I can successfully tcping win7:139 from the redhat box. All firewalls are down on both boxes. I cannot connect from the win7 box to redhat:8003, either via psping redhat:8003, nor telnet redhat 8003, nor by the application client itself. sudo netstat -patn | grep 8003 on the redhat box shows that it's listening on 0.0.0.0. Any thoughts? suggestions?

  Read the article

• VirtualBox: Host OS processor is spiked while guest OS virtual processor is idle?

  - by Greg Mattes

  I'm running Windows XP 32-bit on Windows Vista 64-bit with VirtualBox 3.0.6. Whenever I run the XP VM, Vista (host) reports 100% cpu utilization even though XP (guest) reports between 1-5% cpu utilization. The host box has 2 GB of physical RAM. The guest/vm is configured with 512 MB. The host box has a 64-bit AMD processor. No apps (other than VirtualBox) are running on either host, they're just idling. Any guesses as to why the host processor is spiked? I've enabled various advanced features for the XP guest in the hopes of having better performance: Settings → System → Motherboard: Enable IO APIC Settings → System → Processor: Enable PAE/NX Settings → System → Acceleration: Enable VT-x/AMD-V and Enable Nesting Paging

  Read the article

• Verify server performance

  - by George Kesler

  I'm looking for a quick and SIMPLE way to verify that new servers are performing as expected. The most important metric is disk performance, second is network performance. I’m trying to prevent problems caused by misconfiguration of RAID arrays, NIC teaming etc. The solution should work with both physical and virtual servers. I don’t need sophisticated analysis with different workloads, just one set of benchmarks which I would run against a reference server and later compare to new ones. One problem is that most benchmarks are not giving accurate results when running on a VM.

  Read the article

• What is meant by the terms CPU, Core, Die and Package?

  - by lovesh

  Now this might sound like too many previous questions, but I am really confused about these terms. I was trying to understand how "dual core" is different from "Core 2 Duo", and I came across some answers. For example, this answer states: Core 2 Duo has two cores inside a single physical package and dual core is 2 cpu in a package 2 cpu's in a die = 2 cpu's made together 2 cpu's in package = 2 cpu's on small board or linked in some way Now, is a core different from a CPU? What I understand is there is something that does all the heavy computation, decision making, math and other stuff (aka "processing") is called a CPU. Now what is a Core? And what is a processor when somebody says he has got a Core 2 Duo? And in this context what is a Package and what is a Die? I still don't understand the difference between Core 2 Duo and Dual Core. And can somebody explain hyper-threading (symmetric multi-threading) too if they are super generous?

  Read the article

• How to copy a dynamic TrueCrypt volume quickly?

  - by Ivan

  I have created a dynamic TrueCrypt volume file, set it size to 40 GiB and put about 20 GiB of files on it. When I open the volume file properties it says "Size: 40.0 GB, Size on disk: 23.0 GB". When I try to move the volume file to another physical partition it takes a lot of time as it tries to copy all the 40 GB instead of just 20 GB that the volume file actually takes. Also, when it is less than 40 GB free on the target drive it says insufficient space even though it is more than enough space considering how much does the image file actually take. How do I overcome this? Creating a new volume file on the target drive works but needless to say I'd like a better solution.

  Read the article

• Windows 7 - Move location of Eventlog

  - by Jörg B.

  I am having a particular nasty problem of my main system drive 'disappearing' all of the sudden while the system is running. The vendor somewhat knows about this but has not managed to fix it completely over multiple fw iterations. Problems I have with the support is that I cannot provide any particular system log files/entries to further analyse what might have been going on because, well - windows cannot write to its 'lost' drive before bsod'ing. Is there any way to configure where Windows 7 stores its event logs so that I could specify a second physical hdd?

  Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >