Search Results

Search found 4864 results on 195 pages for 'resolv conf'.

Page 127/195 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

• Can Autodesk Flame run with an nVidia Quadro FX3800 SDI and output to preview through SDI???

  - by cragno

  I am running on Linux RHEL 4.3, DKU 5.0.1. Everything seems to be ok on the xorg.conf and init.cfg, but when I start my projects and Flame enables output to preview I start having preview on my SDI monitor and stop seeing on my main monitor (which is connected to the DisplayPort). Could it be posible that Flame needs Quadro FX4x00/5x00 series with dual DVI to output both monitors?? Cause the FX3800 has only one DVi (which is connected to the SDI card) and 2 DisplayPorts as additional output monitors. Anyone knows a config or workaround this problem?? Thanks ahead!!!

  Read the article

• yum-updatesd problem

  - by smusumeche

  I am trying to setup yum-updatesd to send email notification when there are updates available to the packages on my system. However, I am not receiving any notifications even though there are updates available (as seen in yum check-update) I have verified that the yum-updatesd service is running. This is my /etc/yum/yum-updatesd.conf: [main] # how often to check for new updates (in seconds) run_interval = 3600 # how often to allow checking on request (in seconds) updaterefresh = 600 # how to send notifications (valid: dbus, email, syslog) emit_via = email email_to = [email protected] email_from = [email protected] # should we listen via dbus to give out update information/check for # new updates dbus_listener = yes # automatically install updates do_update = no # automatically download updates do_download = no # automatically download deps of updates do_download_deps = no

  Read the article

• apache not starting in vagrant vm

  - by jimmyjambles

  I used Puphpet.com to create a Vagrant VM to be used for web development. The problem I am having is that the VM cannot start apache on boot. $ sudo /etc/init.d/apache2 start * Starting web server apache2 * * The apache2 configtest failed. Output of config test was: apache2: Syntax error on line 36 of /etc/apache2/apache2.conf: Syntax error on line 1 of /etc/apache2/mods-enabled/authz_default.load: Cannot load /usr/lib/apache2/modules/mod_authz_default.so into server: /usr/lib/apache2/modules/mod_authz_default.so: cannot open shared object file: No such file or directory Action 'configtest' failed. The Apache error log may have more information. the system is ubuntu 12, not sure what modifications I have to make to the puppet config to fix the problem.

  Read the article

• Apache: How can I make my localhost on 192.168.1.101 visible from 192.168.1.102?

  - by takpar

  Hi, I've setup a Apache web server on Ubuntu Linux. I can see http://localhost well. But I can't see localhost from other machines in my network using IP address: http://192.168.1.101 I added the lines below to my apache conf: `Allow from 192.168.1` but it did not work. It says "the connection has timed out". what should i do? PS: adp@adp-desktop:~$ sudo netstat -ap | grep apache tcp 0 0 *:www *:* LISTEN 10581/apache2 tcp 0 0 localhost:www localhost:46017 ESTABLISHED 10586/apache2

  Read the article

• Apache only logs PHP errors if LogLevel is set to debug

  - by Sudowned

  I'm developing a CodeIgniter application and for reasons that I do not fully understand errors have stopped being logged in the file specified in the Apache site conf. The page I'm testing is definitely generating a 500 error, but that is not reflected in the logs unless I set LogLevel debug. Setting LogLevel to error or warn results in no errors being logged. I don't think this is a CI issue because I've been developing this site for close to a week now and errors have been logged as expected until I picked the project up again this morning. Though for what it's worth, I've got: error_reporting(E_ALL); set in my index.php.

  Read the article

• Setup CENTOS Centralized AUDIT and RSYSLOG server

  - by Warron.French

  Attempting to use these links: Sending audit logs to SYSLOG server or http://wiki.rsyslog.com/index.php/Centralizing_the_audit_log I have been unable to get centralized AUDIT logging to work on my ALL-CentOS network environment. I have 6 workstations dt1...dt6, and the log files are not generated at all and I cannot tell if the messages are being sent from these workstations: dt1..dt6 over to the server (srv1). I have configured the rsyslog.conf on the workstations as shown in the link: Sending audit logs to SYSLOG server, and add the additional touches for generating the logfiles into a separate directory per YEAR/MONTH/DAY (using proper syntax) and into separate HOSTNAME-based_audit.log files. Note: RSYSLOG messaging does appear to work from the workstations over to the server, but the audit logging portion is not working. I am running CentOS-6.5 with RPMs: audit-2.2-4.el6_5.x86_64, audit-libs-2.2-4.el6_5.x86_64, and rsyslog-5.8.10-8.el6.x86_64 I have gotten zero responses from wiki.rsyslog.com and really need this to work. If needed I can send files of one of my workstations and the server to aid in the process. Thanks, Warron

  Read the article

• Apache will not start after IP change

  - by Doron

  I'm running CentOS 5.8 and I had to change my server's IP address. Afterwards, I'm unable start Apache. I am also running virtualmin. The error I'm receiving is: Failed to start service Starting httpd: httpd: Could not reliably determine the server's fully qualified domain name, using 184.106.146.125 for ServerName (99) Cannot assign requested address: make_sock: could not bind to address 50.56.33.100:8080 no listening sockets available, shutting down Unable to open logs I edited my httpd.conf to point to the new IP address like such: #Listen 12.34.56.78:80 Listen 184.106.146.125:80 And looking at the error it still seems to be referring to the old ip address (50.*).

  Read the article

• firefox, opera 'The connection was reset' on few POST method calls on Windows and Ubuntu

  - by Gopalakrishnan Subramani

  my website works well with GET method, also few POST methods. Some pages with POST method doesn't work. Some pages with POST work. For example, login page uses POST that works fine. When I post the data on webpage, firefox says "Connecting..." and finally report connection timed out error. The same behavior happens with Opera as well. However Google Chrome works fine. At the server side, I use nginx 1.2.4 with HTTPS and uwsgi for python (flask framework) app. I use geotrust certificate. The same behavior happens with Windows 7 and Ubuntu 12.04 on firefox. I tried firefox in safemode, but no luck. Set auto-detect proxy settings. no luck. Cleared all cookies. no luck Anyone help me to fix this issue? I am posting ngix config. shame on me. I use root, I know which is not advised. need to fix soon. user root; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; # gzip_vary on; # gzip_proxied any; # gzip_comp_level 6; # gzip_buffers 16 8k; # gzip_http_version 1.1; # gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; ssl_session_cache shared:SSL:10m; ssl_session_timeout 10m; server { listen 80; server_name www.example.com; rewrite ^(.*) https://example.com$1 permanent; } server { listen 80; server_name example.com; rewrite ^ https://$server_name$request_uri? permanent; } server { listen 443; server_name example.com; keepalive_timeout 70; ssl on; ssl_certificate /root/cc.cert; ssl_certificate_key /root/cc.key; ssl_protocols SSLv3 TLSv1 TLSv1.1 TLSv1.2; #ssl_ciphers HIGH:!aNULL:!MD5; ssl_ciphers RC4:HIGH:!aNULL:!MD5; ssl_prefer_server_ciphers on; location / { try_files $uri @app; } location @app { include uwsgi_params; uwsgi_pass unix:/tmp/uwsgi.sock; } } } #mail { # # See sample authentication script at: # # http://wiki.nginx.org/ImapAuthenticateWithApachePhpScript # # # auth_http localhost/auth.php; # # pop3_capabilities "TOP" "USER"; # # imap_capabilities "IMAP4rev1" "UIDPLUS"; # # server { # listen localhost:110; # protocol pop3; # proxy on; # } # # server { # listen localhost:143; # protocol imap; # proxy on; # } #}

  Read the article

• Upgrading from php 5.3 to php 5.4 with Macport

  - by dr.stonyhills

  PHP5.4 has been available for sometime now and Macport recently caught up with the release of port php54 but the process of upgrading is not as clear as possible. Even worst for those who are new to maintaining multiple versions of PHP on the same machine. I am keen on trying out some of the new features in PHP5.4 like traits, new array form etc but falling back on to php5.3 for other compatibility stuff. So i sudo port install php5+ (all the variants, apache2 etc) Then i tell it what PHP port to use as default sudo port select --set php php54 Check what version of PHP is active in the terminal using php -v outputs php 5.4.3. But i seem to be having issues with choosing the right non cli version as in the version of the module run by apache etc is still php5.3.12. Do i have to change the reference to the libphp5 in apache httpd.conf? Any advice on the right workflow for switching between php version on macport greatly appreciated!

  Read the article

• Home and End keys in Emacs don't work when run from Tmux

  - by Jan Stolarek

  When I run Emacs from Tmux, the Home and End keys do not work (Home key runs the Search command as if C-s was pressed). The problem started when I added this in my ~/.bashrc file: TERM="xterm" export TERM I've read somewhere that TERM variable should not be set manually but this was the only way I was able to solve problems with colors. Without this setting I got different colors in Emacs when running directly from the terminal and different when running from Tmux. This option caused some of the keys not to work in Emacs when it was run from Tmux, so I added this line to my ~/.tmux.conf: set-window-option -g xterm-keys on This solved problem with all keys except for Home and End. Any ideas how to make these keys work again?

  Read the article

• Debian Wheezy, hostapd running but no AP detected by clients

  - by f0o

  I've an TL-WN951N (AR5416+AR5008) using ath9k module running an hostapd and a dhcp for it. So hostapd starts fine: $ hostapd wifi.test Configuration file: wifi.test Using interface int1 with hwaddr f4:ec:38:9b:d4:93 and ssid 'test' hostapd.conf: interface=int1 driver=nl80211 ssid=test channel=1 But nobody seems to find it or being able to see it or connect to it by setting BSSID to 'test'. I'm quite frustrated now, I find 'howto' after 'howto' from people with same chipsets and it always seemed to work out great for them - but not here... iw list even shows up the AP mode being present at the interface... Thanks for your help

  Read the article

• Apache freezing, How to detect which virtual host is getting hit?

  - by mr-euro

  I have a production server that in the last 24 hours has been hard rebooted 4 times due to freezes. Ping is fine but all other services time-out (Apache, SSHd, etc). I have now diagnosed it to Apache running out of memory due to an exorbitant amount of child processes forking suddenly within seconds of starting Apache. Stopping Apache just after rebooting keeps the server stable again. My two questions are: Is there a way to detect which of the vhosts is being suddenly hammered without looking into each vhost's access log one by one? Is there a way to quickly enable/disable vhosts without commenting (#) them all out in httpd.conf?

  Read the article

• Can't add Samba users in Ubuntu

  - by petersohn

  I am using (K)Ubuntu 10.10, and I'm trying to set up Samba shares. When I try to add a Samba user in the KDE samba configuration, exit the configuration dialog, then enter it again, I see that the user is not added. Then I tried it using the command line (running as root): smbpasswd -a peet 'peet' is my normal user name. It asks for a password, then does something on my hard drive, but I can see no password file created in /etc/samba, and neither does the date of my smb.conf file change. I also don't see the samba user when I open the samba configuration dialog.

  Read the article

• Apache mod_proxy to another server

  - by trobrock

  I am using the proxy_balancer in Apache2 to proxy requests to a Rails application to my rails server on the port the application is running on. This is how its set up... Rails Server Mongrel running on port 8000, when accessing the url directly to http://rails_server:8000 the site loads fine Apache Server Conf file for the site: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName myserver.com ServerAlias application.myserver.com <Proxy balancer://application_cluster> Allow from localhost BalancerMember http://ip.to.server:8000 retry=10 </Proxy> ProxyPass / balancer://application_cluster </VirtualHost> The problem I am having is going to http://rails_server:8000 works fine, but going to http://application.myserver.com Loads the right content, but is displaying all the HTML as text and not rendering it as html

  Read the article

• Slow website load with CNAME, fast when using IP

  - by Nate Strandberg

  I setup two DNS servers on my network: ns1.byte-werx.com && ns2.byte-werx.com I can ping the DNS servers and get a fairly good response time, when I dig them I also get a fairly reasonable response, but any website I filter through them is painfully slow (an upwards of 20+ seconds) -- verifiable by performing a tracert or attempting to access the URL in a browser. The DNS servers are running CentOS 6.3 and BIND9 with 500MB of memory (I figure that should be more than enough?). I have a reverse look-up zone (1.168.192) along with two website zones (www.byte-werx.com and www.stayhomedental.com) If I access the websites using their IP the page loads nearly instantly so I do not believe the issue is with the hosting server, but that is running Ubuntu Server 12.04 and Apache2 with 12GB memory. Any thoughts? I do not have the named.conf file in front of me but I can edit this post to include it if you feel it would be useful. Thanks for any advice!

  Read the article

• Gnome 3 - Unable to change date and time

  - by Chris Harris

  I am running Arch Linux with Gnome 3. Unfortunately, although my time and date settings in /etc/rc.conf show that HARDWARECLOCK='UTC' and TIMEZONE='America/LosAngeles'. I continue to get the timezone of Europe/London. If I try to change the date and time via the GUI. It requires root access. After authorizing root access, the date and time may be changed; however, after closing the GUI window, it automatically reverts back to the previous incorrect timezone. I am able to use pool.ntp.org in order to sync my time to the correct one; however, this works only for the current session and is not fixed. This solution is inconvenient since there is not always network access. What other solutions are available for this problem?

  Read the article

• rsnapshot intervals in configuration file...

  - by Patrick

  A simple question about rsnapshot. In order to perform daily backups I'm going to add lines to cron in my Ubuntu. Then, why do I have also these lines in the rsnapshot.conf ? ######################################### # BACKUP INTERVALS # # Must be unique and in ascending order # # i.e. hourly, daily, weekly, etc. # ######################################### interval hourly 6 interval daily 7 interval weekly 4 #interval monthly 3 If I use cron, should I disable them ? thanks ps. I've just realized that in the crontab I still have "hourly" and "daily". Should I then uncomment only the one I use in the crontab ? And what's the point to specify hourly if it is already specified in cron ? I'm a bit confused. # crontab -e 0 */4 * * * /usr/local/bin/rsnapshot hourly 30 23 * * * /usr/local/bin/rsnapshot daily

  Read the article

• How to figure out which directory is web server root?

  - by matt

  I want to view websites hosted on my Mac when running Windows VMware Fusion. I have an entry in the Windows hosts file to enable the routing: #ip of my mac domain i use on the VM to access it 192.168.1.70 mymac However, it resolves to an empty directory as a 404 is generated. I can see the access log on my Mac that everything is OK access wise. Firefox on VMware states the following response headers: Server Apache/2.2.14 (Unix) mod_ssl/2.2.14 OpenSSL/0.9.8l DAV/2 PHP/5.3.1 Any ideas how I can figure out what directory is being served? I am lost in a maze of twisty httpd.conf passages. localhost on my Mac resolves to my ~/Sites directory. 192.168.1.70 resolves to the same empty directory/404. Thanks.

  Read the article

• Apache Custom Log Format

  - by Shishant

  Hello, I am trying to write a reward system wherein users will be given reward points if they download complete files, So what should be my log format. After searching alot this is what I understand its my first time and havent done custom logs before. First of all which file should I edit for custom logs because this thing I cant find. I am using ubuntu server with default apache, php5 and mysql installation # I use this commands and they work fine nano /etc/apache2/apache2.conf /etc/init.d/apache2 restart I think this is what I need to do for my purpose LogLevel notice LogFormat "%f %u %x %o" rewards CustomLog /var/www/logs/rewards_log rewards This is as it is command or there is something missing? and is there any particular location where I need to add this? and one more thing %o is for filesize that was sent and is it possible to log only files from a particular directory? or for files with size more than 10mb. Thank You.

  Read the article

• Samba does not reload user group members

  - by xato

  I am running a simple samba server setup where users connect to a share which contains folders for specific user groups. The folders are chmod 2770, so only users which are in the correct group can read/write in them. The problem is that if I change group memberships (i.e. remove user from group / add user to group; changes are in sync between clients and server!) samba does not automatically reload the group memberships for the user, so they can still write to groups that they are no longer a member of etc. I either have to reconnect to the share or to restart samba to apply the changes. Is there any way to prevent group caching and/or enable group membership reload in samba? My smb.conf: https://gist.github.com/anonymous/ca7c10a3b3e2168d7a03

  Read the article

• OS X server VPN local ip

  - by gbrandt

  Hi all, I have 10.6.2 server on the internet. I want to vpn into it to get access. I start VPN and it gives me an address in the range I have set 192.168.2.100-192.168.2.105. However the server itself does not have a local ip of 192.168.2.x so I cannot ping it or ssh into it or anything. The machine VPNing gets an ifconfig entry that looks like this: ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280 inet 192.168.2.100 --> 70.72.xxx.xxx netmask 0xffffff00 Where I think it should get: ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280 inet 192.168.2.100 --> 192.168.2.1 netmask 0xffffff00 I can't find anywhere to set the local vpn IP address. And I can't find a pptpd.conf file either. Any help is appreciated.

  Read the article

• OpenVPN Configuration - Windows 7 client & debian server

  - by Guillaume

  I recently formatted my Windows 7 computer and lost my client's config files for OpenVPN. I recovered the certificates and default config that were left on the server but I haven't managed to make the whole thing work again. I assume the server's config and routing table are OK because it was working before (although quite some time ago). Would any of you experts be able to help? server.conf # Serveur TCP/666 mode server proto udp port 666 dev tun # Cles et certificats ca ca.crt cert server.crt key server.key dh dh1024.pem tls-auth ta.key 0 cipher AES-256-CBC # Reseau server 10.8.0.0 255.255.255.0 #push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" push "redirect-gateway def1" keepalive 10 120 # Securite user nobody group nogroup chroot /etc/openvpn/jail persist-key persist-tun comp-lzo # Log verb 3 mute 20 status openvpn-status.log log-append /var/log/openvpn.log client.conf # Client client dev tun proto udp remote *my server's ip address*:666 cipher AES-256-CBC # Cles ca ca.crt cert client1.crt key client1.key tls-auth ta.key 1 # Securite nobind persist-key persist-tun comp-lzo verb 3 Routing table on debian server when OpenVPN server is running: Destination Gateway Genmask Indic Metric Ref Use Iface 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 my server's ip * 255.255.255.0 U 0 0 0 eth0 default 72815.trg.dedic 0.0.0.0 UG 0 0 0 eth0 Routing table on Windows 7 client (OpenVPN not working) =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: [...] =========================================================================== Persistent Routes: None And when the link is established between my client and the server: The server's routing table stays the same. The client's becomes: =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 0.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 30 10.8.0.4 255.255.255.252 On-link 10.8.0.6 286 10.8.0.6 255.255.255.255 On-link 10.8.0.6 286 10.8.0.7 255.255.255.255 On-link 10.8.0.6 286 my server's ip 255.255.255.255 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 10.8.0.6 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 10.8.0.6 286 =========================================================================== Persistent Routes: None What's working: Server and client do connect to each other, SSL certificates are OK. The client gets an IP (10.8.0.6) from the server OpenVPN client is started as an administrator. But: I cannot ping the other one on either side. 'Gateway' value is empty on client's side (in the adapter's "status" window). Client has got no internet access when the link is up. Ideal configuration: I only want the client to be able to use the server's Internet access and access its resources (MySQL server in particular). I do not need or want the server to access the client's local network. The client needs to be able to access it's local network, although all Internet traffic should be redirected to the VPN link. I spent a considerable amount of time on this but it's still not working, any help would be much appreciated. Thanks :)

  Read the article

• xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)

  - by mazgalici

  root@mazgalici:~# startx X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-28-server i686 Ubuntu Current Operating System: Linux mazgalici 2.6.18-194.26.1.el5.028stab079.2PAE #1 SMP Fri Dec 17 19:34:22 MSK 2010 i686 Kernel command line: quiet Build Date: 10 November 2010 11:25:26AM xorg-server 2:1.7.6-2ubuntu7.4 (For technical support please see ) Current version of pixman: 0.16.4 Before reporting problems, check to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 11 01:28:48 2011 (==) Using config directory: "/usr/lib/X11/xorg.conf.d" Fatal server error: xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory) Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log

  Read the article

• Why doesn't tmux respond to shortcuts properly?

  - by Marc

  I'm using OSX 10.8.1 in combination with iTerm2, zsh and tmux via Homebrew. The beginning of my ~/.tmux.conf file looks like this: set -g prefix C-a unbind C-b bind-key a send-prefix set -sg escape-time 1 When I start tmux and press C-a c, nothing happens. When I spam C-a c fast enough then some new tabs open up, but not the equivalent count of my command spaming. When I press C-a first followed by c, nothing happens again. Is there a delay issue or what's up with my tmux installation/configuration?

  Read the article

• Blocking IP's Nginx behind proxy

  - by FunkyChicken

  I'm running a Nginx 1.2.4 webserver here, and I'm behind a proxy of my hoster to prevent ddos attacks. The downside of being behind this proxy is that I need to get the REAL IP information from an extra header. In PHP it works great by doing $_SERVER[HTTP_X_REAL_IP] for example. Now before I was behind this proxy of my hoster I had a very effective way of blocking certain IP's by doing this: include /etc/nginx/block.conf and to allow/deny IP's there. But now due to the proxy, Nginx sees all traffic coming from 1 IP. Is there a way I can get Nginx to read the IP's like how PHP does, with the X-REAL-IP header?

  Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >