Search Results

Search found 5469 results on 219 pages for 'compare and swap'.

Page 128/219 | < Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >

• Wubi installation broken by update - now unable to mount

  - by Outspaced

  As of today, my wubi installation of Ubuntu won't boot (goes straight to 'minimal bash-like interface) and I am unable to mount it when I boot straight to Ubuntu. If I boot straight into Ubuntu (not using Wubi, not going via Windows), I am able to mount the Windows partition and see the Wubi partition there: sudo mount -t ntfs /dev/sda5 /media/winxp And from there I can see the wubi root disk: /media/winxp/ubuntu/disks/root.disk But if I try to mount this: sudo mount -o loop /media/winxp/ubuntu/disks/root.disk /media/wubi I get an error: /media/winxp/ubuntu/disks/root.disk Input/Output Error If I then try fsck: sudo fsck /media/winxp/ubuntu/disks/root.disk I get this: Input/Output Error while trying to open /media/winxp/ubuntu/disks/root.disk The Superblock could not be read or does not describe a correct etx2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt and you might want to try running e2fsk with an alternate superblock: e2fsck -b 8193 <device ... this gives me the same result. There is data on this partition that I really need to be able to access, so I can't delete and reinstall. Any help much appreciated. Thanks.

  Read the article

• Ubuntu 10.04 hung on unattended apt-get upgrade?

  - by hafichuk

  I'm looking into why our ubuntu web server hung this morning and see that there was some package upgrades a few hours prior to the problem. I was able to ssh into the system and get a snapshot from top: top - 08:13:54 up 210 days, 8:25, 2 users, load average: 433.30, 422.40, 375.70 Tasks: 1192 total, 381 running, 810 sleeping, 0 stopped, 1 zombie Cpu(s): 0.5%us, 6.1%sy, 0.0%ni, 93.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 49549772k total, 48518392k used, 1031380k free, 960152k buffers Swap: 11595768k total, 279368k used, 11316400k free, 39355664k cached This is a 16 processor system, so I would typically expect a load in the low teens. I tried to restart apache, which didn't work, and subsequently had to do a hard reboot to get it working again (which it is). One thing I found was that the server did an unattended package update. Is it possible that upgrading php or curl (which our web sites use) might have caused apache to stop responding? Here is the snip from the unattended-upgrades.log from this morning: 2012-09-18 06:48:30,076 INFO Initial blacklisted packages: 2012-09-18 06:48:30,076 INFO Starting unattended upgrades script 2012-09-18 06:48:30,077 INFO Allowed origins are: ["['Ubuntu', 'lucid-security']"] 2012-09-18 06:49:37,017 INFO Packages that are upgraded: gnupg-curl php5-dev linux-server dhcp3-common linux-libc-dev php5-curl gpgv gnupg linux-headers-server linux-image-server php5 php5-mysql php-pear php5-cli php5-common libapache2-mod-php5 dhcp3-client 2012-09-18 06:49:37,018 INFO Writing dpkg log to '/var/log/unattended-upgrades/unattended-upgrades-dpkg_2012-09-18_06:49:37.017909.log'

  Read the article

• Stylecop 4.7.36.0 is out!

  - by TATWORTH

  Stylecop 4.7.36.0 has been released at http://stylecop.codeplex.com/releases/view/79972This is an update to coincide with the latest ReSharper. The full fix list is:4.7.36.0 (508dbac00ffc)=======================Fix for 7344. Don't throw 1126 inside default expressions.Fix for 7371. Compare Namespace parts using the CurrentCulture and not InvariantCulture.Fix for 7386. Don't throw casing violations for filed names in languages that do not support case (like Chinese). Added new tests.fix for 7380. Catch Exception caused by CRM Toolkit.Update ReSharper 7.0 dependency to 7.0.1 (7.0.1098.2760)Fix for 7358. Use the RuleId in the call to MSBuild Logging.Fix for 7348. Update suggestion text for constructors.Fix for 7364. Don't throw 1126 for New Array Expressions.Fix for 7372. Throw 1126 inside catch blocks wasn't working. Add new tests.Fix for 7369. Await is allowed to be inside parenthesis. Add new tests.Fix testsCorrect styling issues.Fix for 7373. Typeparam violations were not being thrown in all cases. Added new tests.Fix for 7361. Rule 1120 was logging against the root element and so Suppressions wouldn't work. Fixed and added tests.Updating de-DE resources - from Michael Diermeier - thank you.Change for 7368. Add the violation count into the Task outputs.Fix for 7383. Fix for memory leak in plugins.Update environment to detect ReSharper 7Fix for 7378. Null reference exception from command line run in message output.Update release history.

  Read the article

• Share home directory between Linux and Windows dual boot

  - by user877329

  This question is somewhat similar to How to use Windows Share has home directory, but in this case Windows is not running. I have installed a dual-boot configuration with Ubuntu 12.04 and Windows. My Windows partition is mounted on /C. Now I want either Ubuntu to locate home directories in /C/Users Which is the location of windows accounts or I want Windows to use D:\home for home directories. (D is the name of the Ubuntu root directory). For the first approach, I have managed to create a test user account test-user:x:1004:1001:Test:/C/Users/test-user:/bin/bash The account works but test-user cannot run any X session. From .xsession-errors chmod: Changing rights on ”/C/Users/test-user/.xsession-errors”: Operation not permitted Would it help get rid of that chmod, which has no effect? How do I? If I use the second approach, I need the Ext2fsd driver, which seems to work, but I am not sure if Windows maps the Ext2 system that early. Here is my fstab proc /proc proc nodev,noexec,nosuid 0 0 UUID=e7cef061-ed8d-4a82-b708-0c8f4c6f297f / ext3 errors=remount-ro 0 1 UUID=2CDCEB43DCEB0644 /C ntfs defaults,umask=007,gid=46 0 0 UUID=b087b5c0-b4bd-47e7-8d34-48ad9b192328 none swap sw 0 0 Update: I found something here: http://www.tuxera.com/community/ntfs-3g-advanced/ Will work if i do a correct mapping between NT users and Linux users.

  Read the article

• Banshee gapless playback does not work when playing mp3s

  - by ComputerGuy505

  Even though I have gapless playback enabled in Banshee's settings menu, there is a very short pause between songs. This might be due to the fact that my hard drive's partitions seem wierd. fdisk -l produces this output: Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x4a73c3cb Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 724153740 361872070+ 7 HPFS/NTFS/exFAT /dev/sda3 1456826368 1465145343 4159488 c W95 FAT32 (LBA) /dev/sda4 724154366 1456826367 366336001 5 Extended Partition 4 does not start on physical sector boundary. /dev/sda5 1440159744 1456826367 8333312 82 Linux swap / Solaris /dev/sda6 724154368 1440159743 358002688 83 Linux Partition table entries are not in disk order Playing mp3's from /dev/sda2 or /dev/sda6 produces this problem. I don't seem to have gapless playback on Rhythmbox or Clementine either, if those media players are supposed to have it. I'm not sure what other info to provide. This is just annoying to me. Thanks for any help.

  Read the article

• Ubuntu Boot Slow - Late Drive Access

  - by Mo2

  So I just installed Ubuntu on a brand new Samsung 840 Pro SSD and have noticed that it is slower than expected. The LED access light doesn't start blinking until after 20 seconds or so have passed, after which the boot up seems to actually start. Does anyone have any ideas as to why this is happening? I have Windows 7 installed on a separate SSD and use Windows Loader as the main loader. Windows Loader points to GRUB2, from which I then start Ubuntu up. The 20 seconds count that I mentioned earlier starts AFTER I select Ubuntu 14.04.1 from the GRUB2 menu. Any help is appreciated. EDIT: I forgot to mention that I have only one partition for / and /home. I intend on using a shared NTFS drive for my documents and other personal files, so I had no need for the /home. I did not make a /swap since I have 12 GB of RAM. I also did not make a /boot since I was told that it's not really necessary in my case.

  Read the article

• preseeded installation keeps asking for confirmation while creating RAID-Partitions on certain hardware-platform

  - by Marc Shennon

  I am aware of the partman-md/confirm_nooverwrite thing, that was the solution to most of this problems in the past. The thing is, that the preseed-file works for almost all hardware-platforms I tested, but only for one (Primergy MX130) it keeps asking for confirmation, before writing the partition-layout to the disks. All machines I tested are running with two SATA Disks, nothing special. I'm not really sure, what information could be needed in order to investigate the cause of this behaviour, but I would of course be willing to provide more information, if someone has an idea. Relevant part of the preseed file is the following: d-i partman-auto/disk string /dev/sda /dev/sdb d-i partman-auto/method string raid d-i partman-md/confirm boolean true d-i partman-partitioning/confirm_write_new_label boolean true d-i partman-md/device_remove_md boolean true d-i partman/choose_partition select finish d-i partman-md/confirm_nooverwrite boolean true # Write the changes to disks? d-i partman/confirm boolean true d-i mdadm/boot_degraded boolean true # RECIPE # Next you need to specify the physical partitions that will be used. d-i partman-auto/expert_recipe string \ multiraid :: \ 500 10000 1000000000 raid $lvmignore{ }\ $primary{ } \ method{ raid } \ . \ 512 1000 786 raid $lvmignore{ }\ $primary{ } \ method{ raid } \ . \ 8192 10240 10240 raid $lvmignore{ }\ method{ raid } \ . # Parameters are: # <raidtype> <devcount> <sparecount> <fstype> <mountpoint> <devices> <sparedevices> d-i partman-auto-raid/recipe string \ 1 2 0 ext4 / /dev/sda1#/dev/sdb1 . \ 1 2 0 ext2 /boot /dev/sda2#/dev/sdb2 . \ 1 2 0 swap - /dev/sda5#/dev/sdb5 .

  Read the article

• Ad Service That Lets You Choose Your Ad, and Then Some [on hold]

  - by user3634450

  I'm trying to build an app for both Android and/or iOS where part of the gameplay actually involves ads as a texture. I need to be able to choose which ads I would like to use. I need to be able to be able to identify the ads (which if I can choose which ads show up in the app shouldn't be that hard). I need to be able to swap in and out new ads on what could possibly be a daily basis (and don't want to have to update the app to do it). And as if that wasn't too needy a list, I need to be able to load 50 ads from the pool of ads I deem fit, all to each and every user of the app at least every couple of days. I don't care if the ads pay, I'm not looking for clicks, but I don't want to have to make 50 fake ads every couple of days, from an "artistic" level I don't want the content to feel phony or fake, and I don't really have a way to load content to each user via some internet source (if anyone could name one that would be great). I'm not sure what kind of ad provider would like or even approve of this, in fact just what I've described might be against Google Play's or iTunes' content developer policies, but if anyone could give me any advice to steer me in the right direction it would be greatly appreciated, thank you.

  Read the article

• Which frontend framework/library should I learn to enhance an existing site? [on hold]

  - by Codemonkey

  I have a large site that I've coded by hand over the last couple of years. It's a sports results service, and allows users to view their results, compare themselves to others, buy photographs, that sort of thing. The code base is fairly substantial, and scarily uses no frameworks or libraries. It's a PHP backend, and a clean & compact frontend. I use the Highcharts library, but other than that all of the JS is my own. I'm not a fan of bulk, even if it is CDN-hosted and heavily cachable. Maybe I need to change my outlook on this? I'm wanting to make some significant changes to the site now, and it seems an appropriate time to enhance my skillset by learning AngularJS, or something else of that ilk. A large part of the site is tables of data, and as just one example of the sort of thing I want to achieve, I'd like to let users add/remove/sort columns better than they currently can. Are any of the various frameworks/libraries out there more suitable to shoehorning into an existing project?

  Read the article

• Retexturing a model via API on the web

  - by AndyMcKenna

  I'm looking at creating a site where a user could see our product and configure the options or look of it and see an image that represents that. The way I'm doing it now is if you have Piece A selected and then you choose Texture X, I have an image on the filesystem that is A with X applied to it. I just swap out my default image with that specific one. One product has 8 areas, with 10-70 pieces per area, and about 200 textures for each piece. Programming the site was pretty simple but we are getting bogged down in rendering all these pieces/textures and entering them into the system. What I would love to do is build a model and have some way to apply the textures via API and render it to the browser. I would even settle for exporting a flat image and pulling that into the browser. Is that possible with something like SolidWorks, 3DSMax, or something else? If the rendering is too time intensive it would still help to batch create all my images and use them the way I am currently.

  Read the article

• Where is my ram?

  - by gsedej

  I have 2GB installed on my machine running Ubuntu 12.04. After some time of use, I see much of my RAM used. The RAM does not free enough even though I closed all my programs. I included 2 screenshots. First is "Gnome system monitor" (all process) and second is "htop" (with sudo), both sorted by memory usage. From both you see, that it's not possible that all running apps takes together 1GB of memory. First 7 biggest programs sum 250, but others are much smaller (all can't sum even 100MB). The cache is 300MB (yellow ||| on htop) and is not included in 1GB used. Also 260MB is already on swap. (which actually makes 1,3GB of used memory) If i start Firefox (or Chrome) with many tabs, it has only 1GB available and not potentially 1,5 GB (assume 0,5GB is for system). When I need more ram, swapping happens. So where is my ram? Which program is using it? How can i free it, to be available for e.g. Firefox? Gnome system monitor htop

  Read the article

• xmodmap modifications aren't enough - anything else I can do?

  - by Codemonkey

  I'm using an Apple keyboard which has some annoyances compared to other keyboards. Namely, the Alt_L and Super_L keys are swapped, and the bar and less keys are swapped ("|" and "<"). I've written an Xmodmap file to swap the keys back: keycode 49 = less greater less greater onehalf threequarters keycode 64 = Super_L NoSymbol Super_L keycode 94 = bar section bar section brokenbar paragraph keycode 108 = Super_R NoSymbol Super_R keycode 133 = Alt_L Meta_L Alt_L Meta_L keycode 134 = Alt_R Meta_R Alt_R Meta_R I did this by identifying the keys using xev and the default modmap xmodmap -pke and swapping the keycodes. xev now identifies all my keys as correct, which is awesome! I can also use the correct keys to type the bar and less than symbols. (I followed this answer on askubuntu: How do I remap certain keys?) But it seems the change isn't very deep. For instance, the Super key is now broken in the Compiz Settings Manager. No shortcuts involving the Super key works (but the Alt key does). Also the settings dialog for Gnome Do doesn't heed the changes in xmodmap, and I can't open the Gnome Do window anymore if I use any of the remapped keys. So to summarize, everything broke. I would like a deeper way of telling Ubuntu (or any other Linux distro for that matter) which keys are which on the keyboard. Is there a way to edit the Keyboard Layout directly? I'm using the Norwegian Bokmål keyboard layout. Does it reside in a file somewhere I could edit? Any comments, previous experiences or relevant stray thoughts would be greatly appreciated - Thanks

  Read the article

• TechEd North America 2012-Day 4 #msTechEd #teched

  - by Marco Russo (SQLBI)

  I hadn’t time yesterday to write a blog post before of the beginning of the day and I recover now that I’m already back to Europe. I spent many hours at the Microsoft booth meeting people who asked questions about Tabular, Power View and PowerPivot. I have to say that I’m really glad so many people started using PowerPivot and of the large interest around Tabular. During my BISM: Multidimensional vs. Tabular I’ve been helped by Alberto during the demo (we joked about he was the demo monkey) and the feedback received are good. I tried to compare the strength and weakness of the two modeling options without spending time describing the area in which they are similar. During the days before I had many discussions about scenarios based on snapshots and I added a few slides to the presentation in order to cover this area that I thought was marginal but seems to be a very common one. To know more, watch the presentation when it will be available or wait for some article I’ll write in the future describing these patterns. In less than 10 days, I’ll be at TechEd Europe and I’m really looking forward to meet other Tabular developers and PowerPivot users there!

  Read the article

• Hard time installing Ubuntu

  - by Nick

  I have a MSI GT780DXR that currently is booting windows 7. I've been trying to dual boot windows 7 and ubuntu for some time now. Here's specs that I think would make a difference Windows 7 500GB*2 RAID 0 hard drives. (Hardware RAID I'm not sure if it's a dedicated RAID card though) 7200RPM Nvidia GT570M Background: I tried to install 12.04 (64 bit) a few times but the Desktop live cd and pendrive boots with a black screen. I've tried wubi but it boots to a black screen as well. I then tried the alternative 12.04 (64 bit) and went through the installation all the way til partitioning. I let Ubuntu notice the raid setup and I setup my swap, /, and home drives, I used my free space to create the three partitions. I tried to resize the windows drive and it told me I couldn't and to be happy with my current setup. When I finally got past I got an error on installing GRUB 2 and decided to skip it and continued on to finish installation. When I tried to boot up I got an invalid partition table error. Windows recovery disc, and a GPARTED live cd couldn't find any hard drives. I ended up following advice and typed this into the recovery command prompt. bootrec /fixmbr bootrec /fixboot bootrec /rebuildBcd It worked and here I am now. The question is, how would I be able to dual boot windows 7 and Ubuntu 12.04 with this information? Thanks,

  Read the article

• Ubuntu 12.04 - syslog showing "SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled"

  - by Tom G

  I have been seeing these random logs in syslog on our production system. There is no XFS setup. Fstab only shows local partitions, only EXT3 . There is nothing in crontabs either. The only file system related package I have installed is 'nfs-kernel-server' Kernel version is 3.2.0-31-generic . kernel: [601730.795990] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled kernel: [601730.798710] SGI XFS Quota Management subsystem kernel: [601730.828493] JFS: nTxBlock = 8192, nTxLock = 65536 kernel: [601730.897024] NTFS driver 2.1.30 [Flags: R/O MODULE]. kernel: [601730.964412] QNX4 filesystem 0.2.3 registered. kernel: [601731.035679] Btrfs loaded os-prober: debug: running /usr/lib/os-probes/mounted/10freedos on mounted /dev/vda1 10freedos: debug: /dev/vda1 is not a FAT partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/10qnx on mounted /dev/vda1 10qnx: debug: /dev/vda1 is not a QNX4 partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/20macosx on mounted /dev/vda1 macosx-prober: debug: /dev/vda1 is not an HFS+ partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/20microsoft on mounted /dev/vda1 20microsoft: debug: /dev/vda1 is not a MS partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/30utility on mounted /dev/vda1 30utility: debug: /dev/vda1 is not a FAT partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/40lsb on mounted /dev/vda1 debug: running /usr/lib/os-probes/mounted/70hurd on mounted /dev/vda1 debug: running /usr/lib/os-probes/mounted/80minix on mounted /dev/vda1 debug: running /usr/lib/os-probes/mounted/83haiku on mounted /dev/vda1 83haiku: debug: /dev/vda1 is not a BeFS partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/90bsd-distro on mounted /dev/vda1 83haikuos-prober: debug: running /usr/lib/os-probes/mounted/90linux-distro on mounted /dev/vda1 os-prober: debug: running /usr/lib/os-probes/mounted/90solaris on mounted /dev/vda1 os-prober: debug: /dev/vda2: is active swap Why would this randomly show up? This also spawns multiple "jfsCommit" processes.

  Read the article

• Grub2 attempting to boot hd1 when it should boot hd0

  - by JoBu1324

  I'm attempting to perform a "normal" install on a USB3 SSD (I don't know if it is noteworthy, but I don't have a swap partition). The installation proceeds normally (I'm installing from a USB2 device I created using LiLi Boot, with a copy of Ubuntu 12.10 64bit that I downloaded directly from the source. The system I'm running Ubuntu on has had a more traditional installation of ubuntu running on it without issue (also 12.10), so I know that everything works A-OK when booting from a 7200RPM internal disk. There are a number of oddities that I've noticed so far, including graphics corruption, but the first and most pressing issue is that Grub2 refuses to recognize the correct hd. From /boot/grub/grub.cfg: if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_msdos insmod ext2 set root='hd1,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 b58ee4f7-d41d-400a-b7b8-18bd1f0ae9d3 else search --no-floppy --fs-uuid --set=root b58ee4f7-d41d-400a-b7b8-18bd1f0ae9d3 fi font="/usr/share/grub/unicode.pf2" fi This is from a 100% fresh install of linux (first boot), which was installed while no hard drives were connected to the system, other than the USB2 LiLi drive. The system refuses to boot unless I change the hd1,msdos1 - hd0,msdos1 in the grub menu at boot, when it is the only disk device connected to the PC. What options are left for me to troubleshoot this issue? I've been racking my brains and taxing the internet trying to dig up something on this problem, but now I'd like to see if the Ubuntu community can rise to the challenge and help me fix this boot problem. This is the second time I've attempted this particular setup. The first time, after days of wasted time, I managed to get it to boot every other boot - i.e. every even boot it would boot into Ubuntu like it was happy; every odd boot it would boot into the BusyBox or Grub prompt. At one point it complained that it couldn't find /dev/disk/by-uuid/[the disk], which I found most perplexing, since the disk was there and booted before and after the occurrence (with intervention).

  Read the article

• How to move ubuntu 12.04 on another drive

  - by Maksim

  How I can move my ubuntu on another drive? I know about clonezilla but problem is that destination drive is smaller the source one. Gparted can't copy-paste partition if destination not the end last partition. I tried dpkg --selected-packages and apt-clone. First one just not install all my packages and removed existed that now I have no full unity and not my all packages. Second one just fail on configuration package. But before I did that way I copy-paste my /etc to new system. My partition table destination : gpt 1 1049kB 106MB 105MB fat32 EFI System ??????????? 2 106MB 12,1GB 12,0GB ext4 3 12,1GB 66,3GB 54,2GB ext4 source: msdos 1 1049kB 12,0GB 12,0GB primary ext4 ??????????? 2 12,0GB 492GB 480GB primary ext4 3 492GB 500GB 8107MB primary linux-swap(v1) Gpt not working with ubuntu that use grub 1.99. I don't know why but my laptop can't boot any device with uefi just black screen and ubuntu detect it on fresh install.

  Read the article

• "The volume filesystem root has only..."

  - by jcslzr

  I am having this problem in ubuntu 12.04, but I fin strange that when I go to /tmp it wont allow me to delete some files, with message "Operation not permitted" or "this file could not be handled because you dont have permissions to read it". It is only a PC and I have the root password. I was trying to get at least 2000 MB of free space on the root file system to upgrade to 12.10 and see if that resolved the problem. Currently free space on root file system is 190 MB. This is my output: root@jcsalazar-Vostro-3550:~# df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda6 7688360 7112824 184984 98% / udev 2009288 4 2009284 1% /dev tmpfs 806636 1024 805612 1% /run none 5120 0 5120 0% /run/lock none 2016584 5316 2011268 1% /run/shm /dev/sda5 472036 255920 191745 58% /boot /dev/sda7 30758848 7085480 22110900 25% /home root@jcsalazar-Vostro-3550:~# sudo parted -l Model: ATA TOSHIBA MK3261GS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 106MB 105MB primary fat16 2 106MB 15.8GB 15.7GB primary ntfs boot 3 15.8GB 278GB 262GB primary ntfs 4 278GB 320GB 41.9GB extended 5 278GB 279GB 499MB logical ext4 6 279GB 287GB 7999MB logical ext4 7 287GB 319GB 32.0GB logical ext4 8 319GB 320GB 1443MB logical linux-swap(v1) I apprecciate any new ideas that can help me. Thnx Carlos

  Read the article

• Dualboot Asus n56v (ubuntu / win 7 x64) - ubuntu doesn't detect partition table made by windows

  - by user76439

  I have an Asus n56v and I've got troubles installing Ubuntu 12.04 x64. I already have installed Windows 7 x64! The hard drive is: Hitachi HTS547575A9E384 My problem: The installation program doesn't recognize the already existing partitions and is offering only options where there are partitions. Can someone help me out? Is this an ACPI/IDE conflict, missing driver or conflict with Windows 7? (I'm not an expert on Linux, only working sometimes with it.) I now tried out some options concerning EFI with a GTP-table. Everything worked but I wasn't able to fix a dual boot (Windows boot loader) nor with GRUB2. The laptop is still having a BIOS, but is able to boot DVDs/CDs in EFI-mode. Now I try to avoid EFI and GTP using the old windows MBR style. I reinstalled Windows, so far no problem. When I want to try to install Ubuntu, it doesn't detect the already existing partition table. It is just showing me an empty space for the whole disk. Other threads like Ubuntu 12.04 does not see windows already install on my computer (dual installation) don't help me out. os-prober shows me a correct result. I don't know how to deal with gdisk as shown in Installer doesn't detect existing partition table/windows 7 partition. I have 750GB for the whole disk. I'm using: 90GB for Windows reserved partition + system partition, 500GB for data and the rest should be for SWAP and linux-system. How can I make Ubuntu detect the partition table?

  Read the article

• Win7 no longer available after installing 12.04

  - by Michael

  I have installed Ubuntu 12.04 but my Windows 7 partition seems to have been lost. It is in sda2. Can anyone help me how to get this Windows 7 partition back without having to reinstall Windows 7? Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd45cd45c Device Boot Start End Blocks Id System /dev/sda1 2048 61433855 30715904 83 Linux /dev/sda2 * 61433856 122873855 30720000 7 HPFS/NTFS/exFAT /dev/sda3 122873856 976769023 426947584 7 HPFS/NTFS/exFAT Disk /dev/sdb: 203.9 GB, 203928109056 bytes 255 heads, 63 sectors/track, 24792 cylinders, total 398297088 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x03ee03ee Device Boot Start End Blocks Id System /dev/sdb1 * 63 20482874 10241406 c W95 FAT32 (LBA) /dev/sdb2 20482875 40965749 10241437+ 1c Hidden W95 FAT32 (LBA) /dev/sdb3 40965750 398283479 178658865 f W95 Ext'd (LBA) /dev/sdb5 40965813 76694309 17864248+ 7 HPFS/NTFS/exFAT /dev/sdb6 76694373 108856439 16081033+ 7 HPFS/NTFS/exFAT /dev/sdb7 108856503 398283479 144713488+ 7 HPFS/NTFS/exFAT Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 240 heads, 63 sectors/track, 129201 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000001 Device Boot Start End Blocks Id System /dev/sdc1 * 63 20480543 10240240+ 82 Linux swap / Solaris /dev/sdc2 20480605 1953519119 966519257+ f W95 Ext'd (LBA) /dev/sdc5 20480607 1953519119 966519256+ 7 HPFS/NTFS/exFAT

  Read the article

• Add an entry for Ubuntu on Windows 8 boot loader

  - by John

  I have installed Ubuntu 12.10 by creating free space in Windows 8 and then using that space to create 3 partitions, one for SWAP, one for GRUB (mounting point is /boot) and one for the actual OS. I did this so the Windows 8 boot loader wouldn't be overwritten in case I ever wanted to remove Ubuntu. I can still boot into Ubuntu if I select the boot loader from the BIOS. I want to add Ubuntu to the Windows 8 boot loader and I've been told to use EasyBCD. The issue with that is it doesn't actually direct Windows to the GRUB file, but rather to something like autogrub0.mri. I have found another programme called Visual BCD which will allow me to actually set the bootloader paths and drives. From here, I don't quite know what to do. I believe I have it set to the correct drive but I don't know if I'm directing to the right file. I think it's /boot/grub/x86_64-efi/grub.efi. I don't know if that's the right file, if I need to remove /boot or if the / need to be \ as that's what Windows uses. Sorry for such a lengthy post, please help!

  Read the article

• SSD I/O extremely slow installing/booting Ubuntu 12.04

  - by Menda

  These are some useful specs: Macbook Pro 7,1 OWC Mercury Extreme Pro 2,5" SATA SSD (120 GB). Has SandForce driver. Ubuntu 12.04 Desktop 32 bits. One 18 GB partition for GNU/Linux and 1.5 GB for SWAP. MD5 for the Ubuntu install CD is OK. I tried to install Ubuntu. It seems that everything is recognized, but there's a big problem: read and writes to the SSD are extremely slow. For example, the install process, which shouldn't take more than 20 minutes, it takes 7 hours. Then, booting up the computer takes about 20 minutes. I checked and the problem is definitely the SSD. Every access to any file is like 10 times slower than normal. I have tried to format the partition as Ext4 and Ext3 with the same problem. Trying to install other distros like Fedora 17, I have a similar problem. There's a "lag" with the SSD, but not so accused as in Ubuntu. Surprisingly, Debian 6.0 installs and works without any problem. Mac OS works pretty good as well in the other partition, so I discard it's an SSD problem. Thanks for your help!

  Read the article

• Encapsulating code in F# (Part 2)

  - by MarkPearl

  In part one of this series I showed an example of encapsulation within a local definition. This is useful to know so that you are aware of the scope of value holders etc. but what I am more interested in is encapsulation with regards to generating useful F# code libraries in .Net, this is done by using Namespaces and Modules. Lets have a look at some C# code first… using System; namespace EncapsulationNS { public class EncapsulationCLS { public static void TestMethod() { Console.WriteLine("Hello"); } } } Pretty simple stuff… now the F# equivalent…. namespace EncapsulationNS module EncapsulationMDL = let TestFunction = System.Console.WriteLine("Hello") ()   Even easier… lets look at some specifics about F# namespaces… Namespaces are open. meaning you can have multiple source files and assemblies can contribute to the same namespace. So, Namespaces are a great way to group modules together, so the question needs to be asked, what role do modules play. For me, the F# module is in many ways similar to the vb6 days of modules. In vb6 modules were separate files and simply allowed us to group certain methods together. I find it easier to visualize F# modules this way than to compare them to the C# classes. However that being said one is not restricted to one module per file – there is flexibility to have multiple modules in one code file however with my limited F# experience I would still recommend using the file as the standard level of separating modules as it is very easy to then find your way around a solution. An important note about interop with F# and other .Net languages. I wrote a blog post a while back about a very basic F# to C# interop. If I were to reference an F# library in a C# project (for instance ‘TestFunction’), in C# it would show this method as a static method call, meaning I would not have to instantiate an instance of the module.

  Read the article

• Need efficient way to keep enemy from getting hit multiple times by same source

  - by TenFour04

  My game's a simple 2D one, but this probably applies to many types of scenarios. Suppose my player has a sword, or a gun that shoots a projectile that can pass through and hit multiple enemies. While the sword is swinging, there is a duration where I am checking for the sword making contact with any enemy on every frame. But once an enemy is hit by that sword, I don't want him to continue getting hit over and over as the sword follows through. (I do want the sword to continue checking whether it is hitting other enemies.) I've thought of a couple different approaches (below), but they don't seem like good ones to me. I'm looking for a way that doesn't force cross-referencing (I don't want the enemy to have to send a message back to the sword/projectile). And I'd like to avoid generating/resetting multiple array lists with every attack. Each time the sword swings it generates a unique id (maybe by just incrementing a global static long). Every enemy keeps a list of id's of swipes or projectiles that have already hit them, so the enemy knows not to get hurt by something multiple times. Downside is that every enemy may have a big list to compare to. So projectiles and sword swipes would have to broadcast their end-of-life to all enemies and cause a search and remove on every enemy's array list. Seems kind of slow. Each sword swipe or projectile keeps its own list of enemies that it has already hit so it knows not to apply damage. Downsides: Have to generate a new list (probably pull from a pool and clear one) every time a sword is swung or a projectile shot. Also, this breaks down modularity, because now the sword has to send a message to the enemy, and the enemy has to send a message back to the sword. Seems to me that two-way streets like this are a great way to create very difficult-to-find bugs.

  Read the article

• Handling game logic events by behavior components

  - by chehob

  My question continues on topic discussed here I have tried implementing attribute/behavior design and here is a quick example demonstrating the issue. class HealthAttribute : public ActorAttribute { public: HealthAttribute( float val ) : mValue( val ) { } float Get( void ) const { return mValue; } void Set( float val ) { mValue = val; } private: float mValue; }; class HealthBehavior : public ActorBehavior { public: HealthBehavior( shared_ptr< HealthAttribute > health ) : pHealth( health ) { // Set OnDamage() to listen for game logic event "DamageEvent" } void OnDamage( IEventDataPtr pEventData ) { // Check DamageEvent target entity // ( compare my entity ID with event's target entity ID ) // If not my entity, do nothing // Else, modify health attribute with received DamageEvent data } protected: shared_ptr< HealthAttribute > pHealth; }; My question - is it possible to get rid of this annoying check for game logic events? In the current implementation when some entity must receive damage, game logic just fires off event that contains damage value and the entity id which should receive that damage. And all HealthBehaviors are subscribed to the DamageEvent type, which leads to any entity possesing HealthBehavior call OnDamage() even if he is not the addressee.

  Read the article

< Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >