Search Results

Search found 5434 results on 218 pages for 'digital audio'.

Page 128/218 | < Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >

  • Scrum Board for a distributed team

    - by Falcon
    I am looking for recommendations on a digital Scrum Board which can be shared over the internet. I imagine something like a big tablet on which you can draw and which remote users can access, too. I dislike Scrum software because I think one major benefit of a Scrum Board is its physical presence. It should be hard to ignore. The best solution would be two big tablets on which you can draw and which can be synchronized. Has anyone got product recommendations for something like this? Or would you rather use a software? Kind regards, Falcon

    Read the article

  • Loud fans despite cool system under Linux (but not Windows)

    - by Sman789
    My new desktop computer runs almost silently under Windows, but the fans seem to run on a constantly high setting under Linux. Psensor shows that the GPU (with NVidia drivers) is thirty-something degrees and the CPU is about the same, so it's not just down to Linux somehow being more processor-intensive. I've read that the BIOS controls the fans under Linux, which makes sense given the high fan speeds when in BIOS as well. It's under Windows, when the ASUS AI Suite 3 software seems to take control, that the system runs more quietly and only speeds the fans up when required. So is there a Linux app which offers a similar dynamic control of the fans, or a setting hidden somewhere in the ASUS BIOS which allows the same but regardless of the OS? EDIT - I've tried using lm-sensors and fancontrol, but pwmconfig tells me "There are no pwm-capable sensor modules installed". This is after the sensors-detect command does find an 'Intel digital thermal sensor', and despite the sensors working fine in apps like psensor. Help getting this to work would likely solve the problem.

    Read the article

  • PHP accessible shared content between two websites on the same VPS on different domains/IPs

    - by Lee Fentress
    I have two ecommerce websites, selling music digital downloads, on the same VPS, currently using cPanel/WHM (but thinking of switching to Virtualmin). They have separate domains and IPs of course. They both share from the same set of music files, so I have duplicate copies in each website directory, which takes up a lot of disk space. How might I go about sharing the same set of music files across both sites, allowing PHP access, so that it does not break my shopping cart's functionality of serving customers the downloads after they have paid for them? I thought of maybe using symlinks or something, but I don't know if it's possible, or if it would have to somehow circumvent built-in security features of the server. I'm new to VPS management.

    Read the article

  • Is MUMPS alive?

    - by ern0
    At my first workplace we were using Digital Standard MUMPS on a PDP 11-clone (TPA 440), then we've switched to Micronetics Standard MUMPS running on a Hewlett-Packard machine, HP-UX 9, around early 90's. Is still MUMPS alive? Are there anyone using it? If yes, please write some words about it: are you using it in character mode, does it acts as web server? etc. (I mean Caché, too.) If you've been used it, what was your feelings about it? Did you liked it?

    Read the article

  • CS, SE, HCI, Information Science, Please recommendation for further education of the former performing art manager seeking career in IT industries? [on hold]

    - by Baek Seungjoo
    IT specialists there J Thank you very much for your collective efforts here, and I got huge help reading your professional comments and advices on each questions I have searched so far! This time, I would like to ask for your practical advices or recommendation on what I am struggling on at this moment. I am currently seeking higher education for my career transition from performing art manager and director to “IT software and/or service development and management specialist”. However, as this field is quite new to me, and there are lots of different work positions, I have no idea which grad major I better pursue in order to get qualification. Of course I know this question could sounds wired as it is kind of personal choice. But my lack of understanding on how IT software companies work in general, your practical and experience-based advice will be great help to me, who spent more than two months of self-research on net. OK. Before my question, here is my plan and history, which are quite different from those currently in IT industry I think… 1) Target Firstly, get career transition into IT service or products companies and get experiences. Eventually, pursue IT entrepreneurship in combination with my arts and cultural production and business expertise. 2) Background Career: performing arts director and manager in theatre-based scale opera and musical Art education in youth BA in literature and Chinese studies (Art & Humanities) MA in Cultural & Creative Industries (Art & Humanities) – dissertation with focus on digital prosumption and the lived experience of the prosumer. (a qualitative research on the agents in the digital world) 2) Personally Huge interest in IT hardware and software, and their trend. Skills to build up, repair, tune PCs -of course this is no more than personal hobby, but shows my interests in this field. 4) Problem Encounter a question “So, what do you think you can contribute practically in this position”. This question turn me down everytime I go through job interviews, and I decided more education in the relevant area. Here are my questions. 1) In terms of work positions in IT software companies, I wonder if I can put the comparison of what “Artists” is to “Arts Manager or Director” is what “Developer” is to “Product Manager”. (Of course, this stereotypical division of Artist-Art Manager is out of sense because the domain overlaps to some extent, and is blurring at least in my field, and they are in different contexts, but just speaking easily.) Normally, artist comes with special arts educations, and they live in their own world of artistic inspiration and creation, and they feel alive in practice and on stages. Meanwhile, from the point of staging and managing productions, the role of art manager is critical as well. Our role cares how the production appeals to the audience in effective way, how to make profit and future sustainable management through that, how to set up future strategy in consideration of the external conditions such as political and social circumstances, audience trend and level, other production trends from on-going and historical perspectives, how and what the production make voice to the society from political, economic, humanitarian stances. So, we need keen eyes on economic, political, and societal environment, have to understand human-being and their desires, must know how to make presentation and attract investors, must have sense in managing and fighting over the limited financial resource, how to extend networking and so on. It is common that the two agents create productions in collaboration (normally not in that ideal way but in conflict and fight though J ). So, we need to know each other’s expertise to some extent, for better production. What are the work positions in IT software industries equivalent to the role of “art manager” in performing arts? From my view, considering developers come with special education in the world of computer science, software engineering, or others (self-education sometimes), and they express themselves with the arts of coding, computer languages on the black screen, and make sort of their artistic production online to the audience, I guess there might be someone who collaborate with developers in creating, managing, and launching IT services or products. 2) Which education among CS, SE, HCI, Information Science, is needed for those seeking such work position? Especially for person like me. (At this moment, Information Science has the highest possibility to get in, since I lack Calculus and Math in undergrad educaiton. But please let me know irrespective of this concern, I think there are ways to back it up if CS or SE education needed in my case) 3) Which field between Information Science and HCI can be more practical background regarding job hungting? And which of them have more demands in job market? AS I checked, HCI is more close to CS than IS in its focus of study area. Thank you very much for your patience reading such a long inquiry, and I appreciate to your efforts in advance. Have a nice day in this beautiful summer.

    Read the article

  • Sponsored Giveaway: Free Copies of WinX DVD Ripper Platinum for All How-To Geek Readers

    - by The Geek
    Have you ever wanted to watch a movie on your iPad, iPhone, Android tablet, or even your computer… without having to pay to download it from iTunes? You can easily convert DVDs to digital formats using WinX DVD Ripper Platinum, and we’re giving away free copies to all How-To Geek readers. To get your free copy, just click through the following link to download and get the license code, as long as you download it by November 27th. For Windows users: http://winxdvd.com/giveaway/ For Mac users: http://www.macxdvd.com/giveaway/giveaway.htm   Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It How To Delete, Move, or Rename Locked Files in Windows

    Read the article

  • What is a Histogram, and How Can I Use it to Improve My Photos?

    - by Eric Z Goodnight
    What’s with that weird graph with all the peaks and valleys? You’ve seen it when you open Photoshop or go to edit a camera raw file. But what is that weird thing called a histogram, and what does it mean? The histogram is one of the most important and powerful tools for the digital imagemaker. And with a few moments reading, you’ll understand a few simple rules can make you a much more powerful image editor, as well as helping you shoot better photographs in the first place. So what are you waiting for? Read on!  What is a Histogram, and How Can I Use it to Improve My Photos?How To Easily Access Your Home Network From Anywhere With DDNSHow To Recover After Your Email Password Is Compromised

    Read the article

  • My LAN USB NIC is not working in ubuntu 11.10?

    - by Gaurav_Java
    Today i start my system its seems that my LAN port is not working . so i buy one USB to LAN adapter and i plug in ubuntu system its doen't connect automatically .when i check result lsusb its shows me that there is one DM9601 Ethernet adapter is connected when i click on network information in panel its shows me that there is something " wired NEtwork (Broadcom NetLink BCM5784M gigabit Ethernet PCIe) I think want some driver for that .i don't have any idea how it can be used ? here output of sudo lspci -nn *00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) 00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07) 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) 00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03) 00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03) 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10) 04:00.0 Network controller [0280]: Intel Corporation WiFi Link 5100 [8086:4232]* sudo lshw -class network *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: 00:1f:16:9a:56:98 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 firmware=sb v2.19 latency=0 link=no multicast=yes port=twisted pair resources: irq:47 memory:f4500000-f450ffff *-network DISABLED description: Wireless interface product: WiFi Link 5100 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: 00:22:fa:09:02:00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-17-generic firmware=8.83.5.1 build 33692 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:46 memory:f4600000-f4601fff *-network description: Ethernet interface physical id: 4 logical name: eth1 serial: 00:60:6e:00:f1:7d size: 100Mbit/s capacity: 100Mbit/s capabilities: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=dm9601 driverversion=22-Aug-2005 duplex=full firmware=Davicom DM9601 USB Ethernet ip=192.168.1.34 link=yes multicast=yes port=MII speed=100Mbit/s I am using Wimax internet connection which i have to connect from browser . at that time my system is not showing that i am connected to any wired connection. but when i connect internet from other system after getting conneted to internet . when i plug again my USB LAN then its shows that you are conneted to wired connetion. here is screenshot for conneting wimax from browser after connecting to internet network connection shows

    Read the article

  • Google I/O 2010 - The open & social web

    Google I/O 2010 - The open & social web Google I/O 2010 - The open & social web Social Web 101 Chris Messina This session will cover the latest and most important trends of the Social Web and dive deep into where this is all going, at both technical and conceptual levels. From the concepts of digital identity, relationships, and social objects, this session will cover emerging technologies like WebFinger, Salmon, ActivityStrea.ms, OpenID, OAuth and OpenSocial. For all I/O 2010 sessions, please go to code.google.com From: GoogleDevelopers Views: 4 0 ratings Time: 47:12 More in Science & Technology

    Read the article

  • This Week in Geek History: YouTube goes Public, Blu-ray vs. HD DVD, and All Your Base Are Belong To Us

    - by Jason Fitzpatrick
    Every week we bring you a snapshot of the current week in the history of technological and geeky endeavors. This week we’re taking a look at the birth of YouTube, the death of the HD DVD format, and the first mega meme. Latest Features How-To Geek ETC How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware The Citroen GT – An Awesome Video Game Car Brought to Life [Video] Final Man vs. Machine Round of Jeopardy Unfolds; Watson Dominates Give Chromium-Based Browser Desktop Notifications a Native System Look in Ubuntu Chrome Time Track Is a Simple Task Time Tracker Google Sky Map Turns Your Android Phone into a Digital Telescope Walking Through a Seaside Village Wallpaper

    Read the article

  • How can you predict the time it will take for two processes in two different machines in a cluster to communicate?

    - by Dokkat
    I am trying to develop a computing application which needs a lot of memory (500gb). Buying a single machine for that is overly expensive. I can, though, buy ~100 small instances on Digital Ocean or similar, divide the memory in blocks and use TCP to emulate shared memory between the instances. Now, my question is: how can I measure/predict the time it will take for two processes in two different machines like that to share information, in comparison to IPC and shared memory? Are there rules of thumb? I don't want exact values, but knowing more or less how much faster one is would be very helpful in visualising the feasibility of this approach.

    Read the article

  • No sound on fresh install of 13.10

    - by Totalnon
    I installed a new copy of 13.10 today and cannot get my audio to work. Speakers test good on other devices, enabled in the BIOS, worked this morning in a Windows environment. I ran all of the available updates through apt-get. aplay -l lists my card (which tells me Ubuntu recognizes the hardware, I have been looking around the web and trying various things to no avail. Pulse folder permissions seem fine, I've reinstalled ALSA, and the card shows both digital and analog in the system settings sound section. I have tried this guide: Sound Troubleshooting Guide As well as looked through these forums under the tags sound and 13.10 Anyone have any ideas that may help me?

    Read the article

  • trying to setup wireless

    - by JohnMerlino
    I'm trying to set up wireless on vostro 1520 dell laptop, with latest Ubuntu install. Here's the output of some of the commands that I was told to run: lshw -C network viggy@ubuntu:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 03 serial: 00:24:e8:da:84:25 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168d-1.fw ip=192.168.2.6 latency=0 multicast=yes port=MII speed=100Mbit/s resources: irq:47 ioport:3000(size=256) memory:f6004000-f6004fff memory:f6000000-f6003fff memory:f6020000-f603ffff *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0e:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:fa000000-fa003fff *-network DISABLED description: Wireless interface physical id: 1 logical name: wlan0 serial: 0c:60:76:05:ee:74 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.2.0-29-generic firmware=N/A multicast=yes wireless=IEEE 802.11bg lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 0e:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 1a:00.0 FireWire (IEEE 1394): O2 Micro, Inc. Device 10f7 (rev 01) 1a:00.1 SD Host controller: O2 Micro, Inc. Device 8120 (rev 01) 1a:00.2 Mass storage controller: O2 Micro, Inc. Device 8130 (rev 01) iwconfig lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extensions. At this point in time, I don't have wireless.

    Read the article

  • Cutting the Cable: The State of Internet-based TV [Infographic]

    - by Jason Fitzpatrick
    If you’ve been turning your cable box on less and watching more shows online, you’re certainly not alone. Check out this infographic look at the state of TV distribution in the digital age to see how everyone is getting their TV fix. People are watching more media online, less from traditional distribution channels, and in a more mobile and selective way than ever before. Hit up the link below to check out the full infographic with a shake down of how media consumption has shifted and who is jockeying for a slice of the consumers’ attention. Cutting the Cable: The State of Internet-based TV [Daily Infographic] How to Enable Google Chrome’s Secret Gold IconHow to Create an Easy Pixel Art Avatar in Photoshop or GIMPInternet Explorer 9 Released: Here’s What You Need To Know

    Read the article

  • Can not install Ubuntu 12.04 or 12.10 on Toshiba qosmio x870. Please help!

    - by Mighty
    I have a new Toshiba qosmio x870 and for the past one week I have been trying to install Ubuntu 12.04 from a USB and Live CD without success. I keep on getting this error: Boot failure: a proper digital signature was not found. One or more files on the selected boot device was rejected by the Secure Boot feature. I even tried installing Ubuntu with the Windows installer. After installation and I reboot the PC, first I see the error that points to: \ubuntu\winboot\wubildr.mbr Status: 0xc000007b Info: The OS couldn't be loaded because a required file is missing or contains errors. When I restart, that the previous error doesn't show up and I see both Windows 8 and Ubuntu (happy that I was successful) but when I click on Ubuntu, it flags an error. This is the first time I'm having a Secure Boot-capable PC. What will be the danger in disabling the secure boot? I'll be happy if I can get assistance from anyone.

    Read the article

  • Upgraded to 12.04 now wifi doesn't work

    - by Benito Kestelman
    My laptop's wifi stopped working when I upgraded to Ubuntu 12.04 (wired works). I just reinstalled 12.04 over my old 12.04 on which wifi didn't work either in an attempt to restore any settings I may have accidentally changed, but it still doesn't work. I also used a wired connection to install updates in case this bug has been fixed, but it has not. Here is the result of sudo lshw -class network: *-network description: Wireless interface product: Centrino Wireless-N + WiMAX 6150 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 67 serial: 40:25:c2:5f:5b:f4 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-29-generic-pae firmware=41.28.5.1 build 33926 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:51 memory:de800000-de801fff *-network description: Ethernet interface product: AR8151 v2.0 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c0 serial: 14:da:e9:c0:da:78 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:54 memory:dd400000-dd43ffff ioport:a000(size=128) Here is rfkill list all: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: asus-wimax: WiMAX Soft blocked: no Hard blocked: no lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 8087:07d6 Intel Corp. Bus 001 Device 004: ID 13d3:5710 IMC Networks Bus 002 Device 003: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth Bus 003 Device 003: ID 0781:5530 SanDisk Corp. Cruzer lspci: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Network controller: Intel Corporation Centrino Wireless-N + WiMAX 6150 (rev 67) 03:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller 04:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0)

    Read the article

  • Whats the Quickest and Cheapest Solution to setup a Affiliate Program for an Online Product?

    - by szahn
    I have a simple HTML landing page setup for an online product I want to sell. This product is a hardcover book. I want to be able to allow other people to setup their own landing pages and make a percentage of the sale from their site. What are some good payment processors or payment gateways that make setting up an affiliate system easy and fast? Clarification - When someone purchases an item, I want (whatever the payment processor is) to automatically route a percentage of that payment to the affiliate and the rest to the original author.) Are there any payment frameworks that already do this? I've found a few sites that let you do this, but they seem to restrict you to digital purchases only. However, my sites is selling a ship-able product and the affiliate system needs to support this.

    Read the article

  • Quantal analyzes the HD in any boot

    - by Lucio
    I have installed Ubuntu 12.10 formating the HDD. Any time that I turn on the PC and boot Ubuntu, it always analyzes my HDD in search for bad blocks. This is what happens: When I turn on the PC and load Ubuntu, before I can login my user, appears the following image. If I press C, the process ends and I can work, if I wait until the process can finish by itself also I can work. Also I had this problem, related to the HDD. My Hard Disk Driver is a Western Digital. Is there any problem on the system? Can I stop this procedure? Information that can help: tune2fs -l output

    Read the article

  • The SQL Beat Podcast-Capturing a SQL Rockstar

    - by SQLBeat
    This is the first permissible (waiting for signed disclaimers) episode of the SQL Beat Podcast featuring the gracious and famous Thomas La Rock. We talk about gay marriage, abortion, SQL community and generally convivial and ergonomic as will be witnessed by THAT LONG PIPE IN THE CHAIR. If there ever was a gentleman, SQL Rockstar is one and I want to thank him from the bottom of my digital recorder for agreeing to talk to me and my audience. All forty of them will appreciate the candor. Enjoy World. I did. Oh and a special rock start drum intro from me to you. CLICK HERE TO PLAY

    Read the article

  • OSCON: Java and a Nice Discount

    - by Tori Wieldt
    Now in its 14th year, OSCON, O'Reilly's annual open source conference, will once again be in Portland, OR on July 16-20, 2012.  Join the world’s open source pioneers, builders, and innovators at the Oregon Convention Center for five intense days to learn about open development, challenge your assumptions, and fire up your brain.With 200+ speakers, 18 tracks, hundreds of technologies, and over 3,000 hackers in attendance, it's a place to learn and network. You’ll find practical tutorials, inspirational keynotes, and a wealth of information on open source languages, platforms, and development. OSCON includes whole track devoted to Java & the JVM, and the list of speakers is impressive. OSCON is where the serious thinkers and doers—and their favorite technologies—converge. And when the day’s sessions are over, join people just like you for some serious fun. Thanks to Java Magazine (you have subscribed to Java Magazine, right? If not, get your free digital subscription now!), you can register for OSCON and save 20% with code JAVAMAG.

    Read the article

  • Is content slowing down your business?

    - by Lance Shaw
    We are living in a digital world, however paper is everywhere and expensive, right? We all agree content is an important part of our organization and contribute to its decision making. However many of us see dealing with this as a challenge and the growth of content is impacting our ability to scale and respond quickly to our customers. Business always has been content intensive. For JD Edwards customers, this is an important consideration.  After all, the processes being run in JD Edwards are usually very critical to the success of your business and if they are not running as smoothly as they should due to manual process steps involving paper or searching for content, you should look into improving them.  To that end, we hope you will join this webinar and learn how Oracle and KPIT | SYSTIME have partnered to help a JD Edwards customer content-enable its enterprise with Oracle WebCenter Content and Oracle WebCenter Imaging 11g and integrate them back with JD Edwards to significantly improve processing speed and operational costs.

    Read the article

  • mount remotely mybook live network drive

    - by bob
    I have a mybook live western digital 1TB hard disk connected to fritzbox 7270 router in office. When I am in the office, I can mount this drive to ubuntu since I have added to the etc/fstab file: //192.168.178.30/user /home/user/DISK cifs auto,iocharset=utf8,user=user%password 0 0 Is there a similar, easy & safe way, to do the same when I am out of the office using the static IP of the fritzbox router? I have already added tcp port forwarding in the router for ports 8080 (to 80 of the disk) and 8443 (to 443 of the disk). Thank you in advance

    Read the article

  • Converting MOD files to quicktime or mpeg for adobe premiere pro

    Ive been Editing lots of videos lately. My company got a video camera: Canon Legria FS200. It saves the movies in a digital format as MOD files. Unfortunately, Adobe Premiere doesnt work with these files. I needed software to convert MOD files to QuickTime or mpeg files. I found a good free one : Its called Mpeg StreamClip:  It works well. and its pretty fast. And its Free. Whats not to like? ...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Ce que Microsoft a appris de la lutte contre les botnets, exposé par l'un de ses chercheurs

    Mise à jour du 20.03.2010 par Katleen Ce que Microsoft a appris en matière de lutte contre les botnets, exposé par l'un de ses chercheurs "Voici publiées les premières leçons que nous et d'autres chercheurs avons tirées de l'impact de l'opération b49." Microsoft semble avoir beaucoup appris de son action de neutralisation du botnet Waledac (même si celui-ci a depuis repris du service). Les unités spécialisées de la Digital Crimes Units ont d'abord du attaquer le botnet par couches. Ceci, via des perturbations de communications P2P et des désactivations de noms de domaine pour empêcher les échanges entre les ordinateurs zombies et les serveurs de commande et de ...

    Read the article

  • No sound in 12.04 on VirtualBox

    - by john crisp
    No sound when installed in VirtualBox. When I boot from the live CD in Windows, sound works fine on my speakers. When in boot the live CD in VirtualBox it does not see my speakers. In sound properties only digital output built in S/PDIF and headphones! I've done the pavcontrol - alsamixer - all settings are OK. I've tried both 32/64 versions of Ubuntu. Running current version VirtualBox. System: Windows 7 64 - i5. What am I overlooking?

    Read the article

< Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >