Search Results

Search found 4629 results on 186 pages for 'mark a johnson'.

Page 128/186 | < Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >

• Video/films organizing software for mac

  - by tig

  I am looking for application that will help me organize movies, clips and other videos I have. I tell it a folder to watch, and then I can mark every video there as watched/unwatched, set rating, add description, tag it. And possibility to open with preferred video player (for me — VLC). Option to get all info from imdb or other source will be very good. yFlicks would be a good one, but it uses quicktime, so it doesn't like any non standard codec and container (for example mkv), it doesn't work well on Snow Leopard. Any suggestions?

  Read the article

• Restart single uWSGI application (when it's in emperor mode)

  - by Oli

  I'm running uWSGI in emperor mode to host a bunch of Django sites based on their individual configs. These are supposed to update when it detects a change in the config file and this largely works when I just touch uwsgi.ini the relevant file. But occasionally I'll mess something up in the Django site and the server won't load. Yeah, yeah, I should be testing better but that's not really the point. When this happens, uWSGI seems to mark the site as dead and stops trying to run it (seems to make sense). Even after I fix the underlying issue, no amount of touching will get that site's uWSGI process up and running. I have to reload the whole uWSGI server (knocking dozens of sites out at once for a few seconds). Is there a way to force uWSGI to just reload one of its sites?

  Read the article

• Troubles doing transparent proxy for virtual machines

  - by Dan H

  Hi iptables gurus. First here is the basic topology: Internet | Gateway | Workstation---eth0---virbr0 | +-----+-----+ | | | vm1 vm2 vm3 I need to test a traffic analyzer running on my workstation, listening on some port (say 8990) on eth0. The rule [I think] I want is "any packets leaving virbr0 going anywhere to port 80 must instead go to port 8990 on eth0". My software running on port 8990 does its own check of the NAT packet mangling to push the packets through after it inspects them. I've been banging my head on this, with different variants of: iptables -t nat -A PREROUTING -i virbr0 -p tcp --dport 80 -j DNAT \ --to 10.0.0.10:8990 And I've tried the more generic method of using the mangle table with --set-mark and ip rule add fwmark, but I'm not getting it. I guess what's confusing me is that everything runs on the same box. Thanks for any guidance.

  Read the article

• In Ubuntu I make changes to php.ini but nothing happens

  - by MrAn3

  Hi, Apache with php works well, but none of the changes I make in php.ini have effect, I've even delete all the contents of the file, then restart Apache, and run phpinfo() and surprisingly everything continues working well. The file I'm editing is the one that appears in the phpinfo() like "Loaded Configuration File". (/etc/php5/apache2/php.ini) P.S. I'm running Ubuntu 9.04 and PHP 5.2 Thanks in advance. More Details: I'm restarting with sudo /etc/init.d/apache2 restart, I've also tried sudo /etc/init.d/apache2 stop, and then start, at restarting I get: Restarting web server apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName ... waiting apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [ OK ] "which php" did not produce any results. My installation of PHP was done using Synaptic Package Manger, choosing "Mark Packages by task" and then LAMP server. I don't have any clue of what to do...

  Read the article

• Cannot reformat flash drive

  - by user933531

  I have tried to reformat on Ubuntu using gparted, in Windows using their tool, and OSX using Disk Utility. I have also attempted by using the terminal but also failed there. When I verify disk using Disk Utility, I get the following output: Verifying volume “REDSTRIPE” ** /dev/disk2s1 ** Phase 1 - Preparing FAT ** Phase 2 - Checking Directories ** Phase 3 - Checking for Orphan Clusters 168 files, 4507316 KiB free (1126829 clusters) MARK FILE SYSTEM CLEAN? no ***** FILE SYSTEM IS LEFT MARKED AS DIRTY ***** Error: This disk needs to be repaired. Click Repair Disk. But I am unable to repair disk. See OSX examples below:

  Read the article

• After upgrade to Windows 8.1, no Skydrive icon in task bar

  - by Jeremy Butler

  I upgraded to 8.1 and now I don't see the SkyDrive icon in the task bar, nor the green light under it indicating the my computer is communicating with SkyDrive. When I go into Control Panel |..|Notification Area Icons, SkyDrive is listed and noted as Up to date. However even though I mark it to Show Icons and Notifications I don't see any icon in the taskbar. Is it supposed to be this way, or do I have a problem? I kind of got used to that little green synchronizing indicator giving me a warm and fuzzy feeling.

  Read the article

• Expertise Location [closed]

  - by Alexey Shatygin

  Is there some really working implementations of the expertise location systems exist? It is very hard to find anything about it. What sources to use, what to read, where to look? I've started with reading David W. McDonald's, Mark S. Ackerman's overview "Just talk to me" and now need just something more detailed. For those, who voting this question to be closed for off-topic: it is connected to IT sphere, if you don't know what it is - why ever vote? http://en.wikipedia.org/wiki/Expertise_finding http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.40.4654&rep=rep1&type=pdf

  Read the article

• Recommend a web file sharing software please.

  - by Baczek

  I'm looking for a web platform to put company files at. My requirements are: should be accessible via a browser should be open source must be installable (dropbox is a no-go) must have an option to put a access time limit on a file must perform garbage collection automatically after a file expires must be able to mark files as public or private an option to protect a file via a pin-code for users without accounts in the system would be nice to have The problem is I don't even know what to search for - all my googling results in either complete groupware solutions or p2p file sharing software. If such a thing doesn't exist, please don't hestitate to say so, so I can crawl to a corner and cry myself to sleep. TIA

  Read the article

• Install multiport module on iptables

  - by tarteauxfraises

  I'am trying to install "fail2ban" on Cubidebian, a Debian port for Cubieboard (A raspberry like board). The following rule failed due to "-m multiport --dports ssh" options (It works, when i run manually the command without multiple options). $ iptables -I INPUT -p tcp -m multiport --dports ssh -j fail2ban-ssh" iptables: No chain/target/match by that name. When i make a cat on "/proc/net/ip_tables_matches", i see that multiport module is not loaded: $ cat /proc/net/ip_tables_matches u32 time string statistic state owner pkttype mac limit helper connmark mark ah icmp socket socket quota2 policy length iprange ttl hashlimit ecn udplite udp tcp What can i do to compile or to enable the multiport module? Thanks in advance for your help

  Read the article

• Running 32 bit SQL Server 2005 on 64 bit Windows Server?

  - by TooFat

  If I have a 32 bit version of SQL Server 2005 running on a 64 bit Windows Server does the max amount of memory avail. the SQL Server process increase from 2gb to 4gb. In reading this blog entry by Mark Russinovich in which he states that "All Microsoft server products and data intensive executables in Windows are marked with the large address space awareness flag" and "Because the address space on 64-bit Windows is much larger than 4GB, something I’ll describe shortly, Windows can give 32-bit processes the maximum 4GB that they can address and use the rest for the operating system’s virtual memory." which leads me to believe that the answer is "yes" but I not totally confident.

  Read the article

• How can I tell if my live web-server is overloaded?

  - by Nick G

  We have a live webserver which doesn't seem to be performing all that well. It's a Dell PowerEdge machine, a few years old (dual core, 4GB) which is hosting about 20 low-traffic websites. However it doesn't seem to be as fast as it used to be. How can we determine the cause of this? If it's website traffic, I would be expecting high CPU but CPU usage is quite low and hovers around the 15-30% mark except for very brief periods. I'm wondering perhaps, if rather than CPU performance being a problem, perhaps it's disk thrashing due to the constant read/writes of all the small web files and database queries. It has 4x 7200 RPM SATA drives in RAID 5. So is there a way to check that it's not disk thrashing?

  Read the article

• Windows 7 automatically install usb driver

  - by Dan

  I have tried to install usb driver for Samsung arndale on Windows 7. Now it has two entries in Device Manager. I can not uninstall the one with question mark. If I uninstall both of them, when I plug in the hardware, Windows 7 will automatically install both of the entries when the circuit pulg in. I don't get the chance to choose the right driver. When I try to update the wrong driver, it says found the driver but can not install it.

  Read the article

• Linux router with diffent gateways for incomming and outgoing connections

  - by nkout

  I have the following topology: LAN Users:192.168.1.2 - 254 (192.168.1.0/24) gateway1: 192.168.2.2/24 used for all outgoing connections of LAN users (default gateway) gateway2: 192.168.3.2/24 used for incoming services (destination NAT, ports 80,443 are forwarded to 192.168.2.1) linux router-server R eth0 192.168.1.1/24: LAN eth1 192.168.2.1/24: WWAN1 eth2 192.168.3.1/24: WWAN2 I want to: route all outgoing traffic coming from LAN and R via 192.168.2.2 route the responses to incoming connections via 192.168.3.2 My config: ifconfig eth0 up 192.168.1.1 netmask 255.255.255.0 ifconfig eth1 up 192.168.2.1 netmask 255.255.255.0 ifconfig eth2 up 192.168.3.1 netmask 255.255.255.0 echo 0 >/proc/sys/net/ipv4/ip_forward route add default gw 192.168.2.2 iptables -t nat -A POSTROUTING -d !192.168.0.0/16 -j MASQUERADE I want to add iptables rule to mark incoming traffic from WWAN2 and send back the responses to WWAN2, while keeping default gateway on WWAN1

  Read the article

• How to force Windows XP to rename a file with a special character?

  - by codeLes

  I have a song that Windows can't play because there is a question mark in the name of the file. "Where Have All the Cowboys Gone?.ogg" // as an example So I try to rename it and Windows complains whether I try it in Explorer or from command prompt. Error I get when trying to copy, rename, or move is: The Filename, directory name, or volume label syntax is incorrect Is there a Windows way to force a rename in this case? Update I'll keep an eye on this question, but after 13 answers and many attempts (aside form 3rd party solutions) it seems that Windows can't do this (or at least my windows can't, no short names). So I'm accepting the answer which was my original solution anyway of using Linux. It would be nice to see Windows handle this somehow, so don't stop just because I've accepted this answer, the question still stands!

  Read the article

• Installing OpenVPN on Windows7

  - by Darcara

  It seems I cannot install the current version of OpenVPN (2.1.2) because the TAP driver is not signed and therefore windows 7 x64 refuses to install it. It shows up in the device manager, but with a yellow exclamation mark. It's a fresh system, and OpenVPN was never installed before. When I start the OpenVPN client it seems to connect fine, but then it stops with CreateFile failed on TAP device: ... All TAP-Win32 adapters on this system are currently in use. How can I install the unsigned drivers, or are there signed drivers available somewhere ?

  Read the article

• How to force Windows XP to rename a file with a special character?

  - by codeLes

  I have a song that Windows can't play because there is a question mark in the name of the file. "Where Have All the Cowboys Gone?.ogg" // as an example So I try to rename it and Windows complains whether I try it in Explorer or from command prompt. Error I get when trying to copy, rename, or move is: The Filename, directory name, or volume label syntax is incorrect Is there a Windows way to force a rename in this case? Update I'll keep an eye on this question, but after 13 answers and many attempts (aside form 3rd party solutions) it seems that Windows can't do this (or at least my windows can't, no short names). So I'm accepting the answer which was my original solution anyway of using Linux. It would be nice to see Windows handle this somehow, so don't stop just because I've accepted this answer, the question still stands!

  Read the article

• Outlook 2010 stopped marking messages as read after reading them

  - by dunxd

  Yesterday I noticed that Outlook 2010 had stopped marking messages as read unless I right click and select Mark as Read. I have checked the Reading Panel settings (it's set to 0 seconds), but I don't use the reading panel to read my mail. When I open a message by doubleclicking it, then close it again, the message is still marked as Read. Outlook 2010 is connecting to Exchange Server 2003. This was working fine until yesterday. As far as I know there have been no config changes at either the client or server end.

  Read the article

• How to "debug" a keyboard in Linux? Like pressing a key and seeing a code in a terminal.

  - by Somebody still uses you MS-DOS

  I didn't have an answer to my problem about adding additional keyboards in my Ubuntu 10.04. Questions mark is not working in my keyboard, only using Alt Gr key + W. So, I don't know if this is a problem with Ubuntu or Virtualbox itself (I'm running it inside a VM). I would like to debug this problem. The keyboard is plugged in, so when I press a key I believe something is being sent to my operating system, some code, I don't know. I would like to digg this problem, find some damn key code and find some damn *.conf file and manually fix my problem. So, do an application like this exist in Linux?

  Read the article

• Mac OS X: How to change the color label of files from the Terminal

  - by Svish

  Is there a way I can set the color label of a file to some color when in the Terminal? I know that the following command lists some info about what the color currently is, but I can't figure out how to do something about it. Like change it. mdls -name kMDItemFSLabel somefile.ext The reason I would like to know is that I want to recursively mark all files in a folder of a certain type with a certain color label (in my case gray). I know how to do the finding: find . -name "*.ext" And I know how I can run the command afterwards for each file using -exec, but I need to know how to do the actual labeling... I would like a solution that only involves commands built-in to Mac OS X. So preferably no 3rd party stuff, unless there is no other way.

  Read the article

• Two Network Adapters on Hyper-V Host - Best way to configure?

  - by GoNorthWest

  I have two physical network adapters installed in my Hyper-V host. I want one to be dedicated to the host, and the other to provide external network services to the VMs. Would the appropriate configuration be as such: Leave the first physical network adapter alone, assigning it the host IP, but not using it to create any Virtual Netorks For the second physical adapter, I would create an External Network, along with a Microsoft Virtual Switch, and use that to provide network services to the VMs. Each virtual NIC for the VM would be associated with that External Network. A static IP would be assigned to this adapter, and each VM would be assigned a static IP as well. The above seems reasonable to me, but I'm not sure if it's correct. Does anyone have any thoughts? Thanks! Mark

  Read the article

• Recommend a web file sharing software please

  - by Baczek

  I'm looking for a web platform to put company files at. My requirements are: should be accessible via a browser should be open source must be installable (dropbox is a no-go) must have an option to put a access time limit on a file must perform garbage collection automatically after a file expires must be able to mark files as public or private an option to protect a file via a pin-code for users without accounts in the system would be nice to have The problem is I don't even know what to search for - all my googling results in either complete groupware solutions or p2p file sharing software. If such a thing doesn't exist, please don't hestitate to say so, so I can crawl to a corner and cry myself to sleep. TIA

  Read the article

• How can one one-handed ease working in Emacs?

  - by N.N.

  My right hand is temporarily immobilized. I would like to do some minor work in Emacs, mostly in Org-mode, but also some in AUCTeX. Is there some way to ease one-handed work in Emacs such as some mode or particular work flow? For instance I noticed pressing C-x u is easier than C-_ for undoing and that it is easier to mark text with methods involving C-Space than with combinations of S- and movement commands. I have found http://stackoverflow.com/questions/2391805/how-can-i-remain-productive-with-one-hand-completely-immobilized but that is not what I am asking for. I want to ease whatever little time spent one-handed in Emacs and this is also interesting for situations where there is no injury involved, such as when one hand is occupied. I also do realize I should avoid unnecessary strain.

  Read the article

• Virtualise Excel in a browser

  - by Macros

  Is it possible to give users access to a virtualised instance of Excel - I don't want to give them access to a full OS (although this will clearly be running in the background, all they can access is Excel - they don't even see any other screens)? Secondly, if it is possible, is it possible to do within a browser? Edit I am building a system which is designed to test candidates skills in Excel and for this reason needs to use the full desktop version and not a web app. I don't want to have to ensure Excel is installed on the client machine as there will be issues around differing versions and security as the workbook(s) that are used in the test use VBA extensively to customise and mark the exercises. Ideally my web app would be able to open a session to the server which then just puts the user into an instance of Excel without ever seeing a desktop. I would also need to be able to pass in command line parameters in order to define which workbook to open and also pass in a unique token to identify the user

  Read the article

• How does Linux's unlink on a NTFS filesystem differs from Window's own implementation?

  - by DavideRossi

  I have an external USB disk with an NTFS filesystem on it. If I remove a file from Windows and I run one of the several "undelete" utilities (say, TestDisk) I can easily recover the file (because "it's still there but it's marked as deleted"). If I remove the file from Linux (I'm using Ubuntu) no utility can recover the file (unless I use a deep-search signature-based one). Why? It looks like Linux does not just "mark it as deleted" but it wipes away some on-disk structure, is this the case?

  Read the article

• Highlight column when a row is clicked, depending on condition

  - by Fredrik

  We have a large matrix with lists of servers on the rows and persons as columns. Then we mark the column/row with an X if the person has access to the server. Pretty basic. But as the matrix grows, it becomes more difficult to quickly find the right person with access. So I'd like some way to make it easier to use In the example above I have clicked on the row "Resource B" and would like all the columns where there is an "X" (User 1, User 2) to be highlighted somehow. Then if I click the row for "Resource C", "User 1" should be highlighted.

  Read the article

< Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >