Search Results

Search found 5712 results on 229 pages for 'card'.

Page 129/229 | < Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >

• Unable to install Nvidia drivers

  - by Tazzer

  a few days ago I installed ubuntu 11.10 on my friends computer. Despite all of our efforts we are unable to open the default unity and it will only open the 2d interface. I have been told in the IRC chat room that we need to install the graphics card drivers(nvidia geforce 420.) When I check the additional drivers app it doesn't show any to install. I tried installing the ones from the nvidia website but no luck, I also forgot to mention. I don't know if it means anything but he has a 64 bit computer and it is ubuntu 11.10 64bit.

  Read the article

• Install reliance Driver software in ubuntu 14.04

  - by A Umar Mukthar

  I'm Using Huawei ec 150 dongle. I need to install driver software It is quiet a big task for begineers in linux. So i took this matter over here. EDIT Output of lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 003: ID 12d1:140b Huawei Technologies Co., Ltd. EC1260 Wireless Data Modem HSD USB Card Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse Bus 002 Device 002: ID 046d:c31d Logitech, Inc. Media Keyboard K200 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

  Read the article

• Ubuntu 12.04 LTS Realtek RTL8192E Problems

  - by Logan

  My wifi is not working. I have tried ndiswrapper with the XP driver but that still did not work. Please explain to me in layman's terms. I can run commands so if you tell me exactly what to put, i will put it. Basically, ubuntu is not showing a wireless networks option and when I ran some command yesterday it said the driver was UNCLAIMED. Please help. This is a wintec card with realtek rtl8192E chip on it. It is a desktop computer. On a 20gb partition, other 60gb is for windows(yeah its an old desktop). Use windows installer to install ubuntu(this is one of the dell desktops that wont boot ubuntu from disk). So any help is appreciated and I would like to get this done THIS weekend.

  Read the article

• How do I figure out which version of OpenCL comes with my nvidia-current-dev package?

  - by levesque

  I am running Ubuntu 10.04 with an nvidia geforce GT 240 card. I installed nvidia-current-dev with apt-get, thus I got a bunch of headers and lib files for OpenCL. However, I am unable to figure out if I have OpenCL 1.0 or 1.1 (could be 1.2, though I doubt it). Does anyone know a way to figure out which version of OpenCL comes with the nvidia-current-dev package (version: 195.36.24-0ubuntu1~10.04.2)? If not, is there another place where I could get an answer?

  Read the article

• Set nomodeset in usb installation (efi loader with iso)

  - by Garrett

  I'm working with the studyblast solution (http://studyblast.wordpress.com/2011/08/14/guide-mac-os-x-lion-how-to-boot-a-linux-live-system-from-a-usb-drive-how-to-update-any-ocz-ssds-firmware/) to creating a live usb for osx. I managed to get Ubuntu booted but the screen looks like a corrupt/glitch image. I can just about make out the clock on the bottom right and a few icons. I've been told that this is an easy fix and that nomodeset needs to be set for the graphics card but all the solutions i find are for a hard drive installed Ubuntu where you can cd in and edit the grub file - how do you do this is it's in an iso? Thanks Garrett

  Read the article

• Wired internet speed is slow in Ubuntu 12.04

  - by RameshKatkam

  I have dual boot Windows 7 and Ubuntu 12.04 on my Dell N4110 laptop. I recently installed Ubuntu 12.04 on my existing windows 7 hard drive. I am experiencing very slow internet speed on Ubuntu(wired connection). But on Windows,internet is really fast. I disabled ipv6 by editing /etc/sysctl.conf No avail. Then i run the following command. sudo ethtool -s eth0 speed 100 duplex full autoneg off No benefit. I am having "Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05)" network card.

  Read the article

• How to install Radeon Open Source Driver?

  - by Clintonio

  I have an MSI Radeon HD 7850 card. MSI provide no Linux support, and the AMD driver gives me an Unsupported Hardware watermark that does not show up in screenshots. I uninstalled the proprietary driver and found that Unity 3D no longer works, and I really only picked Ubuntu because of the excellent shortcuts provided in the recent versions. Trying to locate the open source driver has been a pain for me. According to the documentation I have read it is pre-included in Ubuntu 12.04, yet there is no Unity 3D support. I tried using the newest drivers from AMD's website, but that also had the watermark. Does anyone know how I can get the open source driver? If not, does anyone know how to remove the watermark. I'm on the verge of going back to Windows.

  Read the article

• which service to use among Amazon's free tier for Java app

  - by vikas devde

  this is the first time I am going to host a java app, Amazon offers a free tier which provides free usage for one year, and I am going to use it. But there are so many services (S3, EC2, etc etc), I cant figure out which service is for web hosting, which service is for what use, their docs is so huge, I am confused, what to read. can anybody write some good points, about which service to use specifically for Java apps, how much I will be charged, and they ask for credit/debit card credential for signup, does it mean they will debit me even in the free period?

  Read the article

• Proprietary Driver missing after Kernel upgrade

  - by Chris

  I recently upgraded my kernel to the Linux 3.4 kernel. Upon doing so, I found that it zapped my proprietary driver for my graphics card. As an alternative, I had saved Catalyst 12.8, but now it will not open through Software Center. I tried several other terminal methods, but it seems that many of these postings are bunk. They only work until you're almost done and then you get errors. I just need a little help from somebody who has been there, as I am new to Ubuntu. I'm kind of afraid to reboot because this is my 3rd full load of Ubuntu. Any ideas?

  Read the article

• Can't get Optimus to work with Ironhide on an Asus N53SN

  - by Musaab

  I installed Ubuntu 11.10 (Same issue in 11.04 btw) and then I installed Ironhide. I went through the configuration, chose the one with the highest confirmation for my system and tested it: > Error: Module nvidia does not exist in /proc/modules > P50 Disabling nVidia Card Succeded (the spelling error is theirs) And it changes nothing. I tried other configurations and got worse results. This has really become a major headache. Any solutions?

  Read the article

• Ubuntu 12.04 LTS x86_64 sound artifacts when scrolling with firefox

  - by Nh3xus

  I've been using Ubuntu since the 10.04 LTS version and i have a sound problem that still remain in my fresh install of the 12.04 LTS AMD64 version. This install has been performed by formatting the / partition and my documents were kept safe in the separated /home partition. The problem : When i listen to a audio or video source while browsing the web with Firefox, I have some sound artifacts when i'm scrolling and stops when i'm not doing it. This happens when i'm doing X11 related actions too, such as switching between virtuals desktops. Computer configuration of my laptop : - Ubuntu 12.04 LTS AMD64 - Plantronic USB Headphones - Intel HDA Audio sound card (laptop) with SigmaTel STAC9200 chip - AlsaMixer v 1.0.25 - Nvidia GeForce 7950 GTX with Nvidia 295.40 driver Any advices are welcome here :) Note : This is my first post on AskUbuntu.

  Read the article

• Wireless speed drops over time and doesn't get up if not reconnected

  - by Vili Lehto

  I am using Ubuntu 12.10 64bit and I have a Asus PCE-N15 wireless card(in PCI-E slot). The problem is that first when I connect to my WiFi network the speed is just fine, and actually my link speed never drops, it shows a solid 150mb/s+ link speed and good signal. But the download and upload speeds drop dramatically after couple minutes of use and I have to reconnect to fix this. Network is type IEEE 802.11bgn and uses WPA2/AES encryption. I don't have similar problems on the windows side, and the network is working fine on every other device. iwconfig shows this: wlan0 IEEE 802.11bgn ESSID:"WLAN-AP" Mode:Managed Frequency:2.412 GHz Access Point: 00:1E:AB:05:EF:31 Bit Rate=300 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr=2347 B Fragment thr:off Encryption key:off Power Management:off Link Quality=61/70 Signal level=-49 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:2 Missed beacon:0 So the question is: Is there a way to fix this? Thanks in advance.

  Read the article

• How can I get nvidia-settings to work?

  - by Palace Chan

  I have an ASUS N56VM-TB71 with a GeForce 630M graphics card. I have ubuntu 12.04 and when I vga plugged in a dell monitor, i am able to use it. When I then use my laptops hdmi port to plug in my second monitor, nothing happens, so I went to nvidia-settings and I got the error: You do not appear to be using the NVIDIA X Driver, please run nvidia-xconfig as root and restart the X server. I ran this command and rebooted but I still cannot access nvidia-settings and I keep getting that error even though my /etc/X11/xconf.org is the one that got generated by running that command! What can I do to get around that and use my second monitor as well?

  Read the article

• Headset undetected when plugged in

  - by tough

  I have recently installed Ubuntu 12.04 in my machine which was running windows 7. I have been trying to configure the audio to work exactly as it used to work in Windows but never been able to do so. I have followed this link exactly. I am still not getting the required configuration. aslamixer command shows me with 5 adjustable controls as shown below Master "adjustable" Speaker "adjustable" PCM "adjustable" Front "adjustable" AND Beep "adjustable" Mic Jack Mic In or Lin In S/PDIF OO "in a box" S/PDIF D OO "in a box" S/PDIF P DIGITAL or Analog M It does not detect the headset jack when plugged in. I here mean to say that the sound form the speakers does not go off when I plug in my headset jack. How can I make this working. Some other googling also did not help. I am on Hp Pavilion DV7 machine. The chip is IDT 92HD75B3X5 and the card is HDA ATI SB.

  Read the article

• What is this chargeback scam from eBooks bought on my website?

  - by Dan Friedman

  We have a scammer that is buying our e-Books and then performing chargebacks. Our e-Books don't have DRM, so if they wanted to resell them, they would only need to buy each book once. But instead, they keep buying the same books over and over again and then performing hundreds of chargebacks. We have created some additional rules in our fraud protection tools to block certain aspects, even though all the info looks legit, and are hopeful this will slow them down. But my question is: What is the scam? If they aren't getting any product and they only get chargebacks for something they already purchased, then they can't get additional money from the credit card company, so then what's their motivation?

  Read the article

• Probelm with ATI catalyst drivers in ubuntu 13.10

  - by Raja

  Recently I've installed dual boot ubuntu 13.10 alongside windows 8. My Laptop is Dell Inspiron 15, with AMD Radeon HD 7670 Video Card. Without fglrx my battery is draining to 1:30 hrs from 3:30hrs (In Ubuntu 13.04 but very slow booting ) so I installed fglrx using What is the correct way to install ATI Catalyst Video Drivers (fglrx)? But the problem is as you all know, Black Screen after logging into ubuntu. Tried so many solutions for this like reinstalling unity , ubuntu-desktop , compizconfig , etc.. but none helped except removing fglrx* completely. (But I need them very badly due to battery) Assuming that all hope is lost., Posting here as a final try.! Will be highly greatfull for those who helped :) PS : For those who think this question is a duplicate., Though the question may be a duplicate, but the answer is not! (so give me a assured solution for this problem before flagging this as duplicate., Kindly understand my frustation) Thank You !

  Read the article

• Brightness not working; HP Pavilion Dv6; ATI Radeon HD6770M

  - by Yogesh Dhamija

  I am new to Ubuntu, but so far I am loving it. I was always unable to change my brightness since I installed Ubuntu, but I figured that installing the latest ATI driver for my graphics card would work. I did, but I still can't change the brightness. The slider goes up and down, but the brightness stays the same (on full). I have switchable graphics, an ATI Radeon HD 6770M, and an Intel integrated GPU. Since I am new to Linux, I am not familiar with terminal, so you will have to spell everything out for me, including if you need more information and how to get it. Thanks.

  Read the article

• All video players display black screen.

  - by Dennis

  I'm working in 10.04 Lucid. All my video players (Movie Player and VLC) and the preview windows in editors (OpenShot and Pitivi) will only display a black screen when playing a video. The sound is fine and the videos work fine on other computers. I have tried multiple formats from varying sources .MOV taken from old ffmpeg projects, .AVI straight from a camera, .MP4 using h.264 from OpenShot on another system, .OGV from a gtk-recordmydesktop session on this very computer. I even get a pure black screen in the viewer when starting a remote session in VNC. This box has a GeForce 8400 GS using the Nvidia drivers in case it may be a card problem or setting.

  Read the article

• Very High CPU usage (100%) from just browsing the Web

  - by cole

  I tested on Firefox and Chromioum. Im at 100% while loading pages which causes them to load slow and when I dont have a application running Im at 40% CPU (At least) Everything is slow basically. Im also already on Ubuntu Classic so im not using Unity. Should I go to 10.04? is that more stable? On windows this wasnt an issue. I have a Dual Boot with XP and a 2.4Ghz Intel Celeron with 768MB RAM and an Nvidia 6200 Graphics card. I heard 10.04 was the most stable. any suggestions?

  Read the article

• Apple Cinema Display 23" and grub

  - by Joshua Pruitt

  As per the title, I'm running my display on an older 23" Apple Cinema Display (because I still love it, darn it). I'm pushing it with an ATI Radeon DVI dual-link PCIe card. It works just fine, except GRUB doesn't seem able to push out the 1920x1200 pixel resolution needed in order to show me a boot menu! So..., I keep a smaller second monitor connected as the primary display so that I can see the boot menu and boot the system (I don't use that display once booted). This is a goofy work-around, and I'd like to just use my single display exclusively to boot the machine. I found some grub codes for higher resolutions, but not for 1920x1200. Is it capable of this? Did I just miss it? Thanks in advance!!!

  Read the article

• How can I configure the login screen to be displayed in portrait orientation?

  - by rocket101

  I just started using linux, and I have one question. I have a monitor that I rotated 90? clockwise, so it, being rectangle shaped, is taller than it is wider. Using the system settings in Ubuntu, I set it up, and it works great, except the login screen and loading screen are not rotated right. They are rotated in the "normal" way. Is this just a glitch, or is there some setting I overlooked? I am using the open source drivers, and it is an ATI card, if that matters.

  Read the article

• Getting vga_switcheroo with ATI Mobility Radeon 5650 HD to work

  - by stevejb

  Hello! I have a new HP dv7 laptop with ATI Mobility Radeon HD 5650 graphics card, and also Intel graphics (switchable). I have done the following and want to understand what is going on with my graphics driver Resized windows 7 and did fresh install of 10.10 Booted into 10.10 and things seemed to be working okay Enabled ATI graphics, and was clearly working on the ATI rather than Intel GPU (desktop cube worked) Rebooted, got an error that modprobe could not load modules.dep, and also something about i915 symbols Rebooted into recovery mode, modified xorg.conf to remove the mention of fglrx Rebooted, and the errors show, but then x starts but clearly in intel graphics I would ideally like to be able to switch between the ATI and Intel graphics, a la vga_switcheroo. My first problem seems to be that the folder /sys/kernel/debug/vgaswitcheroo does not exist, hinting at some kind of kernel issue. What can I do to get this available? Thanks!

  Read the article

• Unable to mount samsung galaxy S3 via USB

  - by dez93_2000

  Connecting as either MTP or PTP: neither allows one to see pictures saved as default by phone camera to DCIM folder on external SD card. Similar problems with previous models (e.g. S2) were solvable by 'usb utilities' in wireless & networking settings, but this is no longer present. Other suggestions have mentioned uninstalling various libraries... but i don't wanna just start cutting stuff without knowing it'll help. Any thoughts? Seems like a pretty epic fail from google & samsung. There's not even a linux section on the relevant google site... despite android's usb driver being part of the linux kernel which powers android. Boo!

  Read the article

• Balancing agressive invites

  - by Nils Munch

  I am designing a trading card game for mobiles, with the possibility to add cards to your collection using Gems, aquired through victories and inapp purchases. I am thinking to increase the spread of the game with a tracking system on game invites, enabling the user to invite a friend to play the game. If the friend doesn't own the game client (which is free) he will be offered to download it. If he joins the game, the original player earns X amount of gems as an reward. There can only be one player per mobile device, which should rule out some harvesting. My question is, how do you think the structure of this would be recieved ? All invites are mail based, unless the player already exists in the game world (then he gets a ingame invitation.) I have set a flood filter, so a player can only invite a friend (without the client installed) once a month.

  Read the article

• slow speed transfering files to a local network device

  - by F. Ariel Jung

  I'm having troubles copying files from my pc(ubuntu 13.04 64 bits) to a Media Center(WDTV Live: with an SATA2 HDD attached) through the local network. the speed is to slow, it's up to 2.0 MB/s image: http://s11.postimg.org/g1nuai92b/Captura_de_pantalla_de_2013_06_24_07_46_55.png (I don't use image tag because it is a big image) my PC has a wifi network card Tp Link TL-WN951N and it is connected to a TP Link TL-WDR3500 router via wifi, and the WDTV Live is connected via LAN here is a iwconfig: eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"TL-WDR3500" Mode:Managed Frequency:2.462 GHz Access Point: A0:F3:C1:6C:3B:F1 Bit Rate=39 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=62/70 Signal level=-48 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:33521 Invalid misc:2245290 Missed beacon:0 if more data is required I'll post it as needed. I can't figure this out, needed help. please

  Read the article

< Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >