Search Results

Search found 4084 results on 164 pages for 'contact'.

Page 129/164 | < Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >

  • I’m a Phoenix… and I’m miffed

    - by Stan Spotts
    For personal reasons, almost 30 years ago I left school to enter the workforce. I decided late 2008 to go back to school and finish my degree. After the expected loss of credits for a transfer, from Temple University to University of Phoenix, I'm now about 75% done. The experience has been interesting. Classes are time compressed, only 5 weeks each. Because I have a family and a full time job, I'm taking one at a time. Even so, I've written more papers in these classes than I ever wrote at Temple. My own papers are one thing, but the team papers give me heartburn since I can't completely control what goes into them. Not a big deal except that they make up 30% of our grade. In any case, most of the class facilitators have been great. I had great ones for Accounting, Finance, and frankly most others. I've had a few (4, maybe) cases where I was less than 2 points from an A, and asked the facilitator if I could get any of my work reviewed to see if I could get those extra points. I figured it was worth a shot, and there were no extenuating circumstances to help make my case. I think that only one facilitator decided after a review of one paper that my interpretation was good, just not what he expected, and gave me another point, which gave me an A. So while none are pushovers, they've all been open to discussion, which is as much as I should expect. Overall, good experience. That is, until my last class. On the second week, the day I was due to hand in my personal assignment for the week, I was in an accident. An SUV creamed my little Ford Focus, and totaled it (estimated repair over $11K). I was pretty banged up, especially my left shoulder. I was scheduled for rotator cuff surgery for two weeks later, and getting hit against the door really made it worse. After dealing with the police, the EMT, the tow truck, and the Percocet and Flexeril for the pain, I crashed for the night and didn't get to upload my paper until the next day. The instructor took 30% off for it being late, even after I supplied photos of the car, my arm (huge bruises), and offered to supply the police report number. I figured I'd be okay since that's 2.7 points, and I could lose up to 5 before jeopardizing an A grade. Well, that wasn't the case as we lost more points than I expected on our team paper in Week 5. I ended up with a 94.3. Yes, 7/10 of a point from an A. Of course I asked the instructor to review the issue with the accident and give me just the 0.7 points I needed for the A. That got me a short response of "I have received your emails and review your work over the last five weeks. Your current grade will stand. If you would like to dispute your grade then please feel free to contact your academic advisor. I wish you much success in your professional and academic career." Brrrr….! So I asked my academic advisor to file a dispute. If it wasn't that a pretty bad car accident was the cause, I wouldn't have. Without the grade reduction, I would have had a 97 for the class, so I'll argue that I was performing at the A level throughout the class. Why her purported "review" of my work didn't then warrant such a minor adjustment, I don't know. An A- drops my GPA, and this ticked me off. Now I have to wait and see what the school says about the grade dispute.

    Read the article

  • SharePoint.DesignFactory.ContentFiles–building WCM sites

    - by svdoever
    One of the use cases where we use the SharePoint.DesignFactory.ContentFiles tooling is in building SharePoint Publishing (WCM) solutions for SharePoint 2007, SharePoint 2010 and Office365. Publishing solutions are often solutions that have one instance, the publishing site (possibly with subsites), that in most cases need to go through DTAP. If you dissect a publishing site, in most case you have the following findings: The publishing site spans a site collection The branding of the site is specified in the root site, because: Master pages live in the root site (/_catalogs/masterpage) Page layouts live in the root site (/_catalogs/masterpage) The style library lives in the root site ( /Style Library) and contains images, css, javascript, xslt transformations for your CQWP’s, … Preconfigured web parts live in the root site (/_catalogs/wp) The root site and subsites contains a document library called Pages (or your language-specific version of it) containing publishing pages using the page layouts and master pages The site collection contains content types, fields and lists When using the SharePoint.DesignFactory.ContentFiles tooling it is very easy to create, test, package and deploy the artifacts that can be uploaded to the SharePoint content database. This can be done in a fast and simple way without the need to create and deploy WSP packages. If we look at the above list of artifacts we can use SharePoint.DesignFactory.ContentFiles for master pages, page layouts, the style library, web part configurations, and initial publishing pages (these are normally made through the SharePoint web UI). Some artifacts like content types, fields and lists in the above list can NOT be handled by SharePoint.DesignFactory.ContentFiles, because they can’t be uploaded to the SharePoint content database. The good thing is that these artifacts are the artifacts that don’t change that much in the development of a SharePoint Publishing solution. There are however multiple ways to create these artifacts: Use paper script: create them manually in each of the environments based on documentation Automate the creation of the artifacts using (PowerShell) script Develop a WSP package to create these artifacts I’m not a big fan of the third option (see my blog post Thoughts on building deployable and updatable SharePoint solutions). It is a lot of work to create content types, fields and list definitions using all kind of XML files, and it is not allowed to modify these artifacts when in use. I know… SharePoint 2010 has some content type upgrade possibilities, but I think it is just too cumbersome. The first option has the problem that content types and fields get ID’s, and that these ID’s must be used by the metadata on for example page layouts. No problem for SharePoint.DesignFactory.ContentFiles, because it supports deploy-time resolving of these ID’s using PowerShell. For example consider the following metadata definition for the page layout contactpage-wcm.aspx.properties.ps1: Metadata page layout # This script must return a hashtable @{ name=value; ... } of field name-value pairs # for the content file that this script applies to. # On deployment to SharePoint, these values are written as fields in the corresponding list item (if any) # Note that fields must exist; they can be updated but not created or deleted. # This script is called right after the file is deployed to SharePoint.   # You can use the script parameters and arbitrary PowerShell code to interact with SharePoint. # e.g. to calculate properties and values at deployment time.   param([string]$SourcePath, [string]$RelativeUrl, $Context) @{     "ContentTypeId" = $Context.GetContentTypeID('GeneralPage');     "MasterPageDescription" = "Cloud Aviator Contact pagelayout (wcm - don't use)";     "PublishingHidden" = "1";     "PublishingAssociatedContentType" = $Context.GetAssociatedContentTypeInfo('GeneralPage') } The PowerShell functions GetContentTypeID and GetAssociatedContentTypeInfo can at deploy-time resolve the required information from the server we are deploying to. I personally prefer the second option: automate creation through PowerShell, because there are PowerShell scripts available to export content types and fields. An example project structure for a typical SharePoint WCM site looks like: Note that this project uses DualLayout. So if you build Publishing sites using SharePoint, checkout out the completely free SharePoint.DesignFactory.ContentFiles tooling and start flying!

    Read the article

  • Smart Help with UPK

    - by [email protected]
    A short lesson on how awesome Smart Help is. In Oracle UPK speak, there are targeted and non-targeted applications. Targeted applications are Oracle EBS, PeopleSoft, Siebel, JD Edwards, SAP and a few others. Non-targeted applications are either custom built or other third party off the shelf applications. For most targeted applications you'll see better object recognition (during recording) and also Help Integration for that application. Help integration means that someone technical modifies the help link in your application to call up the UPK content that has been created. If you have seen this presented before, this is usually where the term context sensitive help is mentioned and the Do It mode shows off. The fact that UPK builds context sensitive help for its targeted applications automatically is awesome enough, but there is a whole new world out there and it's called "custom and\or third party apps." For the purposes of Smart Help and this discussion, I'm talking about the browser based applications. How does UPK support these apps? It used to be that you had to have your vendor try to modify the Help link to point to UPK or if your company had control over the applications configuration menus, then you get someone on your team to modify this for you. But as you start to use UPK for more than one, two or three applications, the administration of this starts to become daunting. Multiple administrators, multiple player packages, multiple call points, multiple break points, help doesn't always work the same way for every application (picture the black white infomercial with an IT person trying to configure a bunch of wires or something funny like that). Introducing Smart Help! (in color of course, new IT person, probably wearing a blue shirt and smiling). Smart help eliminates the need to configure multiple browser help integration points, and adds a icon to the users browser itself. You're using your browser to read this now correct? Look up at the icons on your browser, you have the home link icon, print icon, maybe an RSS feed icon. Smart Help is icon that gets added to the users browser just like the others. When you click it, it first recognizes which application you're in and then finds the UPK created material for you and returns the best possible match, for (hold on to your seat now) both targeted and non-targeted applications (browser based applications). But wait, there's more. It does this automatically! You don't have to do anything! All you have to do is record content, UPK and Smart Help do the rest! This technology is not new. There are customers out there today that use this for as many as six applications! The real hero here is SMART MATCH. Smart match is the technology that's used to determine which application you're in and where you are when you click on Smart Help. We'll save that for a one-on-one conversation. Like most other awesome features of UPK, it ships with the product. All you have to do is turn it on. To learn more about Smart Help, Smart Match, Targeted and Non-Targeted applications, contact your UPK Sales Consultant or me directly at [email protected]

    Read the article

  • Don’t miss this very popular presentation on Punchout in iProcurement on June 26th 2012

    - by user793553
    Don’t miss this very popular presentation on Punchout in iProcurement on June 26th.  See Doc ID 1448447.1 for the Webcast details. ADVISOR WEBCAST: Punchout in iProcurement PRODUCT FAMILY: EBZs- Procurement   June 26, 2012 at 14:00 UK / 15:00 Cairo / 6:00 am Pacific / 7:00 am Mountain / 9:00 am Eastern This one-hour session is recommended for technical and functional users who are maintaining and/or implementing the Punchout from iProcurement. The session will provide an overview of the different Punchout model, setup, and the Punchout to PO xml/cxml cycle. Also, it will provide tips in troubleshooting the common issues when new supplier is added to Punchout or the existing one stops working. TOPICS WILL INCLUDE: Overview of the Punchout Models. Provide the knowledge in the Punchout to PO Process cycle. Demo - Punchout. Certificates and setup. Learn the common issues and how to address in an efficient way. (Documentation and Notes) A short, live demonstration (only if applicable) and question and answer period will be included. Oracle Advisor Webcasts are dedicated to building your awareness around our products and services. This session does not replace offerings from Oracle Global Support Services. Current Schedule can be found on Note 740966.1 Post Presentation Recordings can be found on Note 740964.1 WebEx Conference Details Topic: Advisor Webcast - Punchout in iProcuremen Date and Time: Tuesday, June 26, 2012 3:00 pm, Egypt Time (Cairo, GMT+02:00) Tuesday, June 26, 2012 2:00 pm, GMT Summer Time (London, GMT+01:00) Tuesday, June 26, 2012 9:00 am, Eastern Daylight Time (New York, GMT-04:00) Tuesday, June 26, 2012 7:00 am, Mountain Daylight Time (Denver, GMT-06:00) Event number: 597 373 155 -------------------------------------------------------  To register for this meeting  -------------------------------------------------------  1. Event address for attendees: https://oracleaw.webex.com/oracleaw/onstage/g.php?d=597373155&t=a 2. Register for the meeting.  Once the host approves your request, you will receive a confirmation email with instructions for joining the meeting. InterCall Audio Instructions A list of Toll-Free Numbers can be found below. VOICESTREAMING IS AVAILABLE teleconference ID: 70528713 UK standard International:+44 1452 562 665 US Free Call: 1866 230 1938 US Local call: 1845 608 8023 Global Toll-Free Numbers MOS doc#:  https://metalink3.oracle.com/od/faces/secure/km/DocumentDisplay.jspx?id=1148600.1 Designation Number Argentina Free Call 0800 444 1009 Australia Free Call 1800 763 650 Austria Free Call 0800 111 956 Austria Local Call 0192 865 72 Belgium Free Call 0800 724 46 Belgium Local Call 0817 000 60 Brazil Free Call 0800 761 0835 Bulgaria Free Call 0080 011 511 76 Canada Free Call 1866 984 6577 Columbia Free Call 0180 091 562 17 Croatia Free Call 0800 222 305 Cyprus Free Call 8009 6341 Czech Republic Free Call 8007 007 95 Denmark Free Call 8088 8467 Denmark Local Call 3272 7506 Finland Free Call 0800 112 398 Finland Local Call 0923 114 014 France Free Call 0805 110 463 France Local Call 0359 580 290 Germany Free Call 0800 101 4918 Germany Local Call 0692 222 161 19 Greece Free Call 0080 012 8135 Hong Kong Free Call 8009 661 55 Hungary Free Call 0680 018 839 Hungary Local Call 0180 889 97 India Free Call 0008 001 006 600 Ireland Free Call 1800 300 170 Ireland Local Call 0143 198 35 Israel Free Call 1809 431 440 Italy Free Call 8007 840 87 Italy Local Call 0236 009 700 Japan Free Call 0066 338 124 31 Latvia Free Call 8000 3680 Luxembourg Free Call 8002 7941 Malaysia Free Call 1800 814 528 Mexico Free Call 0018 666 864 905 Monaco Free Call 8009 3655 Netherlands Free Call 0800 949 4596 Netherlands Local Call 0207 168 000 New Zealand Free Call 0800 451 190 North China Free Call 1080 074 413 29 Norway Free Call 8001 8057 Norway Local Call 2151 0847 Poland Free Call 0080 012 135 73 Portugal Free Call 8007 894 20 Romania Free Call 0800 895 558 Russia Free Call 8108 002 385 2044 Slovenia Free Call 0800 804 55 South Africa Free Call 0800 982 794 South China Free Call 1080 044 111 82 South Korea Free Call 0079 814 800 7887 Spain Free Call 9009 389 85 Spain Local Call 9111 421 10 Sweden Free Call 0200 214 344 Sweden Local Call 0850 596 375 Switzerland Free Call 0800 835 040 Switzerland Local Call 0445 804 280 Thailand Free Call 0018 004 421 98 UK Free Call 0800 073 1830 UK Local Call 0844 871 9364 UK National Call 0871 700 0309 UK Standard International +44 (0) 1452 562 665 USA Free Call 1866 230 1938   Back to the top   Copyright? 2010, Oracle. All rights reserved. Contact Us | Legal Notices and Terms of Use | Privacy Statement

    Read the article

  • USB software protection dongle for Java with an SDK which is cross-platform “for real”. Does it exist?

    - by Unai Vivi
    What I'd like to ask is if anybody knows about an hardware USB-dongle for software protection which offers a very complete out-of-the-box API support for cross-platform Java deployments. Its SDK should provide a jar (only one, not one different library per OS & bitness) ready to be added to one's project as a library. The jar should contain all the native stuff for the various OSes and bitnesses From the application's point of view, one should continue to write (api calls) once and run everywhere, without having to care where the end-user will run the software The provided jar should itself deal with loading the appropriate native library Does such a thing exist? With what I've tried so far, you have different APIs and compiled libraries for win32, linux32, win64, linux64, etc (or you even have to compile stuff yourself on the target machine), but hey, we're doing Java here, we don't know (and don't care) where the program will run! And we can't expect the end-user to be a software engineer, tweak (and break!) its linux server, link libraries, mess with gcc, litter the filesystem, etc... In general, Java support (in a transparent cross-platform fashion) is quite bad with the dongle SDKs I've evaluated so far (e.g. KeyLok and SecuTech's UniKey). I even purchased (no free evaluation kit available) SecureMetric SDKs&dongles (they should've been "soooo" straighforward to integrate -- according to marketing material :\ ) and they were the worst ever: SecureDongle X has no 64bit support and SecureDongle SD is not cross-platform at all. So, has anyone out there been through this and found the ultimate Java security usb dongle for cross-platform deployments? Note: software is low-volume, high-value; application is off-line (intranet with no internet access), so no online-activation alternatives and the like. -- EDIT Tried out HASP dongles (used to be called "Aladdin"), and added them to the no-no list: here, too, there is no out-of-the-box (out-of-the-jar) support: e.g. end-linux-user has to manually put the .so library (the specific file for the appropriate bitness) in the right place on his filesystem, and export an env. variable accordingly. -- EDIT 2 I really don't understand all the negativity and all the downvoting: is this a taboo topic? Is it so hard to understand that a freelance developer has to put food on the table everyday to feed its family and pay the bills at the end of the month? Please don't talk about "adding value" as a supplier, because that'd be off-topic. Furthermore I'm not in direct contact with end-customers, but there's an intermediate reselling entity: it's this entity I want to prevent selling copies of the software without sharing the revenue. -- EDIT 3 I'd like to emphasize the fact that the question is looking for a technical answer, not one about opinions concerning business models, philosophical lucubrations on the concept of value, resellers' reliability, etc. I cannot change resellers, because this isn't a "general purpose" kind of sw, but a very vertical one and (for some reasons it's not worth explaining here) I must go through them. I just need to prevent the "we sold 2 copies, here's your share [bwahaha we sold 10]" scenario.

    Read the article

  • If You Could Cut Your Meeting Times in ½ Would You?

    - by [email protected]
    By Brian Dayton on April 22, 2010 2:02 PM I know it sounds like a big promise. And what I'm thinking about may not cut a :60 minute meeting into :30 minutes, but it could make meetings and interactions up to 2X more productive. How? Social Media for the Enterprise, Not Social Media In the Enterprise Bear with me. I'm not talking about whether or not workers should or shouldn't have access to Facebook on corporate networks. That topic has been discussed @ length. I'm also not talking about the direct benefits of Social Networking tools like Presence (the ability to see someone online and ask a question in real-time), blogs, RSS feeds or external tools like Twitter. The Un-Measurable Benefits Would you do something that you believe will have a positive effect--but can't be measured? It's impossible to quantify the effectiveness of a meeting. However, what I am talking about would be more of a byproduct of all of the social networking tools above. Here's the hypothesis: As I've gotten more and more busy with work, family, travel and kids--and the same has happened to my friends and family--I'm less and less connected. But by introducing Facebook to my life I've not only made connections with longtime friends whom I haven't spoken to in years--but I've increased the pace and quality of interactions, on and offline, with close friends who I see and speak to every week. In some cases it even enhances the connections and interactions with those I see or speak to every day. The same holds true in an organization. Especially a larger one with highly matrixed organizational structures. You work with people on a project, new people come in with each different project and a disproportionate amount of time is spent getting oriented and staying current. Going back to the initial value proposition--making meetings shorter/more effective--a large amount of time is spent: - At Project Kick-off: Meeting and understanding team member's histories, goals & roles - Ongoing: Summarizing events since the last meeting or update email In my personal, Facebook life today I know that: - My best friend from college - has been stranded in India for 5 days because of the volcano in Iceland and is now only 250 miles from home - One of my co-workers started conference calls at 6:30 this morning - My wife wasn't terribly pleased with my painting skills in our new bathroom (disclosure: she told me this face to face too) Strengthening Weak Links A recent article in CIO Magazine, Three Dangerous Social Media Misconceptions (Kristen Burnham, March 12, 2010) calls out the #1 misconception as follows: 1. "Face-to-face relationships are far more valuable than virtual ones." While some level of physical interaction will always add value to relationships, Gartner says that come 2020, most relationships and teams will be based on "weak links"--that is, you may not have personally met a contact, but you'll know of or may have interacted with him via social sites like Facebook, LinkedIn and Twitter. The sooner your enterprise adopts these tools, the sooner your employees will learn them, and the sooner you'll begin to cultivate these relationships-of-the-future. I personally believe that it's not an either/or choice between face-to-face and virtual interactions. In fact, I'll be as bold as saying it doesn't matter. I can point to two extremely valuable work relationships that I've had over the past 5 years: - I shared an office with one of them - I met the other person, face-to-face, only once Both relationships were very productive. The dynamics were similar. The communication tactics differed immensely. What does matter is the quality, frequency and relevance of interactions. Still sound like too much? An over-promise? Stay tuned for my next post The Gap Between Facebook and LinkedIn. I'll also connect some of the dots with where Oracle Applications and technologies are headed.

    Read the article

  • Stack Exchange Notifier Chrome Extension [v1.2.9.3 released]

    - by Vladislav Tserman
    About Stack Exchange Notifier is a handy extension for Google Chrome browser that displays your current reputation, badges on Stack Exchange sites and notifies you on reputation's changes. You will now get notified of comments on your own posts (questions and answers) and of any comments that refer to you by @username in a comment, even if you do not own the post (aka mentions). All StackExchange sites are supported. Screenshots Access Install extensions from Google Chrome Extension Gallery Platform Google Chrome browser extension Contact Created by me (Vladislav Tserman). I'm available at: vladjan (at) gmail.com Follow Stack Exchange Notifier on twitter to get notified about news and updates: http://twitter.com/se_notifier Code Written in Java, Google Web Toolkit under Eclipse Helios. Stack Exchange Notifier uses the Stack Exchange API and is powered by Google App Engine for Java. Changelog I will be porting extension to not use app engine back-end due to some limitations. New versions of the extension will be making direct calls to Stack Exchange API right from your browser. Please do not expect new versions of the extension any time soon. Sorry. Read more about limitations here http://stackapps.com/questions/1713 and here http://stackoverflow.com/questions/3949815 Currently, you may sometimes experience some issues using extension, but most users will have no problems. You may notice too many errors in the logs, but there is nothing I can do with this now. Thanks for using my little app, thanks to all of you it still works in spite of many issues with API Version 1.2.9.3 - Thursday, October 14, 2010 - Bug fix release (back-end improvements) Version 1.2.9.2 - Thursday, October 07, 2010 - Bug fix release (high rate of occasional API errors were noticed so some fixes added to handle them were possible) Version 1.2.9.1 - Tuesday, October 05, 2010 - Mostly bug fix release, back-end performance improvements - You will now get notified of comments on your own posts (questions and answers) that are not older than 1 year and of any comments that refer to you by @username in a comment, even if you do not own the post (aka mentions). This is experimental feature, let me know if you like/need it. - New 'All sites' view displays all websites from Stack Exchange network (part of new feature that is not finished yet) Version 1.2.9 - Saturday, September 25, 2010 - Fixes an issue when some users got empty Account view. - When hovering on @Username on account view the title now displays '@Username on @SiteName' to easily understand the site name Version 1.2.7 - Wednesday, September 22, 2010 - Fixed an issue with notifications. - Minor improvements Version 1.2.5 - Tuesday, September 21, 2010 - Fixed an issue where some characters in response payload raised an exception when parsing to JSON. v1.2.3 (Sunday, September 19, 2010) - Support for new OpenID providers was added (Yahoo, MyOpenID, AOL) - UI improvements - Several minor defects were fixed v1.2.2 (Thursday, September 16, 2010) - New types of notifications added. Now extension notifies you on comments that are directed to you. Comments are expandable, so clicking on comment title will expand height to accommodate all available text. - UI and error handling improvements Future Application still in beta stage. I hope you're not having any problems, but if you are, please let me know. Leave your feedback and bug reports in comments. I'm available at: vladjan (at) gmail.com. I'm working on adding new features. I want to hear from the users and incorporate as much feedback as possible into the extension. Any suggestions for improvements/features to add?

    Read the article

  • Markus Zirn, "Big Data with CEP and SOA" @ SOA, Cloud &amp; Service Technology Symposium 2012

    - by JuergenKress
    ORACLE PROMOTIONAL DISCOUNT FOR EXCLUSIVE ORACLE DISCOUNT, ENTER PROMO CODE: DJMXZ370 Early-Bird Registration is Now Open with Special Pricing! Register before July 1, 2012 to qualify for discounts. Visit the Registration page for details. The International SOA, Cloud + Service Technology Symposium is a yearly event that features the top experts and authors from around the world, providing a series of keynotes, talks, demonstrations, and panels, as well as training and certification workshops - all dedicated to empowering IT professionals to realize modern service technologies and practices in the real world. Click here for a two-page printable conference overview (PDF). Big Data with CEP and SOA - September 25, 2012 - 14:15 Speaker: Markus Zirn, Oracle and Baz Kuthi, Avocent The "Big Data" trend is driving new kinds of IT projects that process machine-generated data. Such projects store and mine using Hadoop/ Map Reduce, but they also analyze streaming data via event-driven patterns, which can be called "Fast Data" complementary to "Big Data". This session highlights how "Big Data" and "Fast Data" design patterns can be combined with SOA design principles into modern, event-driven architectures. We will describe specific architectures that combines CEP, Distributed Caching, Event-driven Network, SOA Composites, Application Development Framework, as well as Hadoop. Architecture patterns include pre-processing and filtering event streams as close as possible to the event source, in memory master data for event pattern matching, event-driven user interfaces as well as distributed event processing. Focus is on how "Fast Data" requirements are elegantly integrated into a traditional SOA architecture. Markus Zirn is Vice President of Product Management covering Oracle SOA Suite, SOA Governance, Application Integration Architecture, BPM, BPM Solutions, Complex Event Processing and UPK, an end user learning solution. He is the author of “The BPEL Cookbook” (rated best book on Services Oriented Architecture in 2007) as well as “Fusion Middleware Patterns”. Previously, he was a management consultant with Booz Allen & Hamilton’s High Tech practice in Duesseldorf as well as San Francisco and Vice President of Product Marketing at QUIQ. Mr. Zirn holds a Masters of Electrical Engineering from the University of Karlsruhe and is an alumnus of the Tripartite program, a joint European degree from the University of Karlsruhe, Germany, the University of Southampton, UK, and ESIEE, France. KEYNOTES & SPEAKERS More than 80 international subject matter experts will be speaking at the Symposium. Below are confirmed keynotes and speakers so far. Over 50% of the agenda has not yet been finalized. Many more speakers to come. View the partial program calendars on the Conference Agenda page. CONFERENCE THEMES & TRACKS Cloud Computing Architecture & Patterns New SOA & Service-Orientation Practices & Models Emerging Service Technology Innovation Service Modeling & Analysis Techniques Service Infrastructure & Virtualization Cloud-based Enterprise Architecture Business Planning for Cloud Computing Projects Real World Case Studies Semantic Web Technologies (with & without the Cloud) Governance Frameworks for SOA and/or Cloud Computing Projects Service Engineering & Service Programming Techniques Interactive Services & the Human Factor New REST & Web Services Tools & Techniques Oracle Specialized SOA & BPM Partners Oracle Specialized partners have proven their skills by certifications and customer references. To find a local Specialized partner please visit http://solutions.oracle.com SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: Markus Zirn,SOA Symposium,Thomas Erl,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

    Read the article

  • SQL SERVER – List of All the Samples Database Available to Download for FREE

    - by Pinal Dave
    It is pretty much very common to have a sample database for any database product. Different companies keep on improving their product and keep on coming up with innovation in their product. To demonstrate the capability of their new enhancements they need the sample database. Microsoft have various sample database available for free download for their SQL Server Product. I have collected them here in a single blog post. Download an AdventureWorks Database The AdventureWorks OLTP database supports standard online transaction processing scenarios for a fictitious bicycle manufacturer (Adventure Works Cycles). Scenarios include Manufacturing, Sales, Purchasing, Product Management, Contact Management, and Human Resources. Coconut Dal Coconut Dal is a lightweight data access layer, for use in projects where the Entity Framework cannot be used or Microsoft’s Enterprise Library Data Block is unsuitable. Anyone who is handwriting ADO.NET should use a library instead and Coconut Dal might be the answer.  DataBooster – Extension to ADO.NET Data Provider The dbParallel DataBooster library is a high-performance extension to ADO.NET Data Provider, includes two aspects: 1) A slimmed down API encapsulation which simplified the most common data access operations (DbConnection -> DbCommand -> DbParameter -> DbDataReader) into a single class DbAccess, to help application with a clean DAL, avoid over-packing and redundant-copy of data transfer. 2) A booster for writing mass data onto database. Base on a rational utilization of database concurrency and a effective utilization of network bandwidth. Tabular AMO 2012 The sample is made of two project parts. The first part is a library of functions to manage tabular models -AMO2Tabular V2-. The second part is a sample to build a tabular model -AdventureWorks Tabular AMO 2012- using the AMO2Tabular library; the created model is similar to the ‘AdventureWorks Tabular Model 2012. SQL Server Analysis Services Product Samples SQL Server Analysis Services provides, a unified and integrated view of all your business data as the foundation for all of your traditional reporting, online analytical processing (OLAP) analysis, Key Performance Indicator (KPI) scorecards, and data mining. Analysis Services Samples for SQL Server 2008 R2 This release is dedicated to the samples that ship for Microsoft SQL Server 2008R2. For many of these samples you will also need to download the AdventureWorks family of databases. SQL Server Reporting Services Product Samples This project contains Reporting Services samples released with Microsoft SQL Server product. These samples are in the following five categories: Application Samples, Extension Samples, Model Samples, Report Samples, and Script Samples. If you are interested in contributing Reporting Services samples, please let us know by posting in the developers’ forum. Reporting Services Samples for SQL Server 2008 R2 This release is dedicated to the samples that ship for Microsoft SQL Server 2008 R2 PCU1. For many of these samples you will also need to download the AdventureWorks family of databases. SQL Server Integration Services Product Samples This project contains Integration Services samples released with Microsoft SQL Server product. These samples are in the following two categories: Package Samples and Programming Samples. If you are interested in contributing Integration Services samples, please let us know by posting in the developers’ forum. Integration Services Samples for SQL Server 2008 R2 This release is dedicated to the samples that ship for Microsoft SQL Server 2008R2. For many of these samples you will also need to download the AdventureWorks family of databases. Windows Azure SQL Reporting Admin Sample The SQLReportingAdmin sample for Windows Azure SQL Reporting demonstrates the usage of SQL Reporting APIs, and manages (add/update/delete) permissions of SQL Reporting users. Windows Azure SQL Reporting ReportViewer-SOAP API usage sample These sample projects demonstrate how to embed a Microsoft ReportViewer control that points to reports hosted on SQL Reporting report servers and how to use SQL Reporting SOAP APIs in your Windows Azure Web application. Enterprise Library 5.0 – Integration Pack for Windows Azure This NuGet package contains a zip file with the source code for the Enterprise Library Integration Pack for Windows Azure.  Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: SQL Sample Database

    Read the article

  • Christian Radio Locator iPhone app

    - by Tim Hibbard
    For the last three months or so I've been working on an iPhone (and iPad) app in my spare time. It all started when I took the kids to Minneapolis and had a hard time finding radio stations to listen to on the trip. I looked in the App Store for an app that would use my GPS to show me Christian radio stations nearby, but there wasn't one. So I decided to build my own. Using public information from the FCC and a few other sources, I built a database in Google docs that contains the frequency for all Christian radio stations, where the tower is located and how far the tower can reach. I also included any streaming audio information and other contact information like Facebook or Twitter that I could find. Google spreadsheets publish in JSON format (yes, really) and Xcode can automatically deserialize JSON into a properly formatted entity. This is one area that Xcode is far superior to C#. In a just a few lines of code, I can have a list of in-memory strongly typed objects from a web-based JSON feed. To accomplish the same thing natively in .NET would be much more work and wouldn't feel nearly as clean when it was said and done. The snazzy icon shown above was built by my very talented wife. She hasn't yet provided any feedback on the app's user interface, which is why it is so plain and boring. I used a navigation view controller and EGO pull to refresh table view to construct the main window. Pulling down to refresh initiates a GPS lookup, which queries the database for radio stations in range (yes, you can pass parameters to Google spreadsheets and get a subset back in JSON). Pulling up on the table extends the range of the search and includes stations that may not be close enough to get clear audio. This feature is not that intuitive and the next version contains an update to that functionality. Tapping a cell will show a detail view that displays additional information about the station. The user can click to view the station on a map, click to listen to an online stream (if available) or click to see the station's Facebook or Twitter pages. Swiping back and forth on the table changes the information that is displayed on the right hand side of the table cell. It scrolls through the city where the tower is located, how far the phone is from the tower, the range of the tower and in the next version a signal strength indicator. This was pretty easy to implement once I figured out how to assign the gesture recognizer delegate.  Tapping and holding on a cell will jump the user to the map view screen. Which is pretty cool, but very hard for even a power user to discover. To tackle the issue of discoverability, the next version has a series of instructions displayed at the bottom of the screen to show the user the various shortcuts. Once the user has performed the swipes and long holds, the instructions disappear. I've learned a lot developing this app. Spending over a decade exclusively in .NET made the learning curve a bit steep, but once I learned the structure and syntax of Objective-C, I've learned to appreciate the power and simplicity of it. Here are a few screenshots. I would really appreciate any feedback and especially iTunes reviews. Technically it is open source and a smart googler could probably find it. I just haven't promoted it as open source.     Cross posted from timhibbard.com

    Read the article

  • The Next Wave of PeopleSoft Capabilities for the Staffing Industry Is Here

    - by Mark Rosenberg
    With the release of PeopleSoft Financials and Supply Chain Management 9.1 Feature Pack 2 in January this year, we introduced substantial new capabilities for our Staffing Industry customers. Through a co-development project with Infosys Limited, we have enriched Oracle's PeopleSoft Staffing Solution with new tools aimed at accelerating and improving the quality of job order fulfillment, increasing branch recruiter productivity, and driving profitable growth. Staffing industry firms succeed based on their ability to rapidly, cost-effectively, and continually fill their pipelines with new clients and job orders, recruit the best talent, and match orders with talent. Pressure to execute in each of these functional areas is even more acute on staffing firms as contingent labor becomes a more substantial and permanent part of the workforce mix. In an industry that creates value through speedy execution, there is little room for manual, inefficient processes and brittle, custom integrations, which throttle profitability and growth. The latest wave of investment in the PeopleSoft Staffing Solution focuses on generating efficiency and flexibility for our customers. Simplicity To operate profitably and continue growing, a Staffing enterprise needs its client management, recruiting, order fulfillment, and other processes to function in harmony. Most importantly, they need to be simple for recruiters, branch managers, and applicants to access and understand. The latest PeopleSoft Staffing Solution set of enhancements includes numerous automated defaulting mechanisms and information-rich dashboard pagelets that even a new employee can learn quickly. Pending Applicant, Agenda management, Search, and other pagelets are just a few of the newest, easy-to-use tools that not only aggregate and summarize information, but also provide instant access to applicants, tasks, and key reports for branch staff. Productivity The leading firms in the Staffing industry are those that can more efficiently orchestrate large numbers of candidates, clients, and orders than their competitors can. PeopleSoft Financials and Supply Chain Management 9.1 Feature Pack 2 delivers productivity boosters that Staffing firms can leverage to streamline tasks and processes for competitive advantage. For example, we enhanced the Recruiting Funnel, which manages the candidate on-boarding process, with a highly interactive user interface. It integrates disparate Staffing business processes and exploits new PeopleTools technologies to offer a superior on-boarding user experience. Automated creation of agenda items and assignment tasks for each candidate minimizes setup and organizes assignment steps for the on-boarding process. Mass updates of tasks and instant access to the candidate overview page (which we also expanded), candidate event status, event counts, and other key data enable recruiters to better serve clients and candidates. Lower TCO Constructing and maintaining an efficient yet flexible labor supply chain can be complicated, let alone expensive. Traditionally, Staffing firms have been challenged in controlling their technology cost of ownership because connecting candidate and client-facing tools involved building and integrating custom applications and technologies and managing staff turnover, placing heavy demands on IT and support staff. With PeopleSoft Financials and Supply Chain Management 9.1 Feature Pack 2, there are two major enhancements that aggressively tackle these challenges. First, we added another integration framework to enable cost-effective linking of the Staffing firm’s PeopleSoft applications and its job board distributors. (The first PeopleSoft 9.1 Feature Pack released in March 2011 delivered an integration framework to connect to resume parsing providers.) Second, we introduced the teaming concept to enable work to be partitioned to groups, as well as individuals. These two capabilities, combined with a host of others, position Staffing firms to configure and grow their businesses without growing their IT and overhead expenditures. For our Staffing Industry customers, PeopleSoft Financials and Supply Chain Management 9.1 Feature Pack 2 is loaded with high-value tools aimed at enabling and sustaining a flexible labor supply chain. For more information, contact [email protected] or [email protected].

    Read the article

  • Oracle Forms Migration to ADF - Webinar vom ORACLE Partner PITSS

    - by Thomas Leopold
      Tuesday, February 22, 2011 5:00 PM - 6:00 PM CET Free Webinar Re-Engineering Legacy Oracle Forms Migration from Forms to ADF - A Case Study Join Oracle's Grant Ronald and PITSS to see a software architecture comparison of Oracle Forms and ADF and a live step-by-step presentation on how to achieve a successful migration. Learn about various migration options, challenges and best practices to protect your current investment in Oracle Forms. PL/SQL is without match for what it does: manipulating data in the database. If you blindly migrate all your PL/SQL to Java you will, in all probability, end up with less maintainable and less efficient code. Instead you should consider which code it best left as PL/SQL..." Grant Ronald - "Migrating Oracle Forms to Fusion: Myth or Magic Bullet?" Re-Engineering existing business logic is mandatory for your legacy Forms application to take advantage of the new Software architectures like ADF. The PITSS.CON solution combines the deep understanding of Oracle Forms and Reports applications architecture with powerful re-engineering capabilities that allows the developer community to protect the investment in the existing Forms applications and to concentrate on fine-tuning and customization of the modernized functionality rather than manually recreating every module and business logic from bottom up. Registration: https://www2.gotomeeting.com/register/971702250   PITSS GmbHKönigsdorferstrasse 25D-82515 WolfratshausenDo not forget to check out these Free Webinars in March! Thursday, March 3, 2011 Upgrade and Modernize Your Application to Forms 11g Registration/Information Tuesday, March 15, 2011 Shaping the Future for your Oracle Forms Application:Forms 11g, ADF, APEX Registration/Information Tuesday, March 29, 2011 Oracle Forms Modernization to APEX Registration/Information Registration is limited, so sign up  today!Presented By:        Grant Ronald, Senior Group Product Manager,Oracle       Magdalena Serban, Product Manager,PITSS   Contact Us:            PITSS in Americas +1 248.740.0935 [email protected] www.pitssamerica.com       PITSS in Europe +49 (0) 717287 5200 [email protected] www.pitss.com   White Paper:      From Oracle Forms to Oracle ADF and JEE     © Copyright 2010 PITSS GmbH, Wolfratshausen, Stuttgart, München; Managing Directors: Dipl.-Ing. Andreas Gaede, Michael Kilimann, Dipl.-Ing. Dirk Fleischmann Commercial Register: HRB 125471 at District Court Munich. All rights reserved. Any duplication or further treatment in any medium, in parts or as a whole, requires a written agreement. If you do not want to receive invitations for events, meetings and seminars from us, then please click here.

    Read the article

  • Observations From The Corner of a Starbucks

    - by Chris Williams
    I’ve spent the last 3 days sitting in a Starbucks for 4-8 hours at a time. As a result, I’ve observed a lot of interesting behavior and people (most of whom were uninteresting themselves.) One of the things I’ve noticed is that most people don’t sit down. They come in, get their drink and go. The ones that do sit down, stay much longer than it takes to consume their drink. The drink is just an incidental purchase. Certainly not the reason they are here. Most of the people who sit also have laptops. Probably around 75%. Only a few have kids (with them) but the ones that do, have very small kids. Toddlers or younger. Of all the “campers” only a small percentage are wearing headphone, presumably because A) external noise doesn’t bother them or B) they aren’t working on anything important. My buddy George falls into category A, but he grew up in a house full of people. Silence freaks him out far more than noise. My brother and I, on the other hand, were both only children and don’t handle noisy distractions well. He needs it quiet (like a tomb) and I need music. Go figure… I can listen to Britney Spears mixed with Apoptygma Berzerk and Anthrax and crank out 30 pages, but if your toddler is banging his spoon on the table, you’re getting a dirty look… unless I have music, then all is right with the world. Anyway, enough about me. Most of the people who come in as a group are smiling when they enter. Half as many are smiling when they leave. People who come in alone typically aren’t smiling at all. The average age, over the last three days seems to be early 30s… with a couple of senior citizens and teenagers at either end of the curve. The teenagers almost never stay. They have better stuff to do on a nice day. The senior citizens are split nearly evenly between campers and in&outs. Most of the non-solo campers have 1 person with a laptop, while the other reads the paper or a book. Some campers bring multiple laptops… but only really look at one of them. This Starbucks has a drive through. The line is almost never more than 2-3 cars long but apparently a lot of the in&out people would rather come in and stand in line behind (up to) 5 people. The music in here sucks. My musical tastes can best be described as eclectic to bad, but I can still get work done (see above.) I find the music in this particular Starbucks to be discordant and jarring. At this Starbucks, the coffee lingo is apparently something that is meant to occur between employees only. The nice lady at the counter can handle orders in plain English and translate them to Baristaspeak (Baristese?) quite efficiently. If you order in Baristaspeak however, she will look confused and repeat your order back to you in plain English to confirm you actually meant what you said. Then she will say it in Baristaspeak to the lady making your drink. Nobody in this Starbucks (other than the Baristas) makes eye-contact… at least not with me. Of course that may be indicative of a separate issue. ;)

    Read the article

  • What’s New from the Oracle Marketing Cloud at Oracle OpenWorld 2014

    - by Kathryn Perry
    A Guest Post by Laura Vogel, Director, Oracle Marketing Cloud Events (pictured left) Marketing—CX Central is your hub for all things Marketing related at OpenWorld in San Francisco, September 28-October 2, 2014. Learn how to personalize the modern marketing journey to improve customer loyalty. We’re hosting more than 60 breakout sessions, half of which will highlight customer success stories from marquee brands including Bizo, Comcast, Dell, Epson, John Deere, Lane Bryant, ReadyTalk and Shutterfly. Moscone West, Levels 2 and 3To learn more about how modern marketing works, visit Moscone West, levels 2 and 3, for exciting demos of each of the Oracle Marketing Cloud solutions (BlueKai, Compendium, Eloqua, Push I/O, and Responsys). You also can check out our stations for Vertical Marketing Best Practices, the Markie Awards, and more! CX Spotlight Sessions “Accelerating Big Profits in Big Data,” Jeff Tanner, Baylor University “Using Content Marketing to Impact Every Stage of the Buyer’s Journey,” Jennifer Agustin, Bizo “Expanding Your Marketing with Proven Testing and Optimization,” Brian Border, Shutterfly and Matthew Balthazor, Epson “Modern Marketing: The New Digital Dialogue,” Cory Treffiletti, Oracle A Special Marquee SessionDell’s Hayden Mugford will speak on "The Digital Ecosystem: Driving Experience Through Contact Engagement.” She will highlight how the organization built a digital ecosystem that supports a behaviorally driven, multivehicle nurturing campaign. The Dell 1:1 Global Marketing team worked with multiple partners to innovate integrations with Oracle Eloqua, Oracle Real-Time Decisions for real-time decision logic, and a content management system (CMS) that enables 100 percent customized e-mails. The program doubled average order values for nurtured contacts versus non-nurtured and tripled open and click-through rates versus push e-mail. It Wouldn’t Be an Oracle Marketing Cloud Event Without a Party!We’re hosting CX Central Fest: a unique customer experience specifically designed for attendees of CX Central. It will include a chance to rock out at a private concert featuring Los Angeles indie electronic pop group, Capital Cities! Join us Tuesday, September 30 from 7-9 p.m. Other Oracle Marketing Cloud Session Highlights Thought leadership by role Exploring the benefits of moving to the Cloud Product line roadmaps and innovations in Marketing Technical deep dives for product lines within Marketing Best practices and impactful business measurements Solutions that are integrated across CX Target AudienceSession content is geared toward professionals in Marketing, Marketing Operations, Marketing Demand Generation, Social: Chief Marketing Officers, Vice Presidents, Directors and Managers. OutcomesCustomers attending Marketing—CX Central @ OpenWorld will be able to: Gain insight into delivering consistent cross-channel marketing Discover how to provide the right information to the right customer at the right time and with the right channel Get answers to burning questions and advice on business challenges Hear from other Oracle customers about recommended best practices to help their organization move forward Network and share ideas to help create a strategy for connecting with customers in better ways Resources At a Glance Register Now Track Site—View Marketing Sessions 72 1024x768 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Focus on Session Doc Downloadable Justification Email OpenWorld is a fabulous way for you to see all that Oracle Marketing Cloud has to offer. Register today.

    Read the article

  • Listen to Online Radio with Antenna

    - by Asian Angel
    Are you looking for some fresh new music to listen to at home or at work? With Antenna you can listen to online radio stations from all over the world. Note: Requires Adobe AIR (download link at bottom of article). Antenna in Action Once you have completed the installation and started Antenna up this is the window that you will see. The left side will have a “browsing pane” where you can search for the stations that you would like to listen to using the various categories. Based on the stations that you choose the background map will change location to match the stations locations. Here is a closer look at the “Categories Bar”. For our first example we used the “Country Category” to find our first station to listen to. When you choose a country you will be presented with a list of the stations available for that country. To start listening to a particular station just double click on the appropriate entry line. A closer look at the “browser pane” with our first station playing. Notice the “Reliability Indicator” that will be available for each listing…some may be better than others and you can use this to choose the best streaming stations from the list. In the upper left corner you will notice three icons…each will open a small pop-up window with a specific purpose. The first icon will open up the “About Window”. If you need to contact Antenna’s creator or would like to place a request for a station to be added to the app then this is the best way to do it. The second icon will open up a Antenna specific chat window. The third icon will allow you to set a default location and make adjustments to some of the app’s settings. Recording Audio The “Recording Function” is the only area where we experienced some “quirkiness” with the app. To start recording press the “Round White Button”… Note: Based on feedback on the app creator’s webpage some people have experienced the same problem as we did during our tests with the app failing to complete the recordings. Hopefully this bug will be fixed with the next release. Once recording has started the button will turn red. Click on the button again to stop recording. Once you have stopped recording you will see the following message window appear and the main window will be shaded over with a whitish color until you click “OK”. Conclusion Regardless of the slight quirkiness in recording online music Antenna more than makes up for it with the terrific selection of online stations and streaming capability. New fresh music for you to listen to is only a click or two away… Links Download Antenna (Antenna Homepage) Download Antenna at Softpedia Download Adobe AIR Similar Articles Productive Geek Tips Listen to Local FM Radio in Windows 7 Media CenterListen to Over 100,000 Radio Stations in Windows Media CenterListen To XM Radio with Windows Media Center in Windows 7Listen and Record Over 12,000 Online Radio Stations with RadioSureWeekend Fun: Watch Television on Your PC with AnyTV TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Will it Blend? iPad Edition Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC Live Map of Marine Traffic

    Read the article

  • CRMIT’s HIGH VALUE CRM++ PLUGINS FOR CRM On DEMAND

    - by Soumo Das
    Customer satisfaction and experience being the two most considerable factors, these days businesses are on the lookout for automation tools that are world class, agile and keep quality at its core. CRMIT has developed such tools using cutting edge technologies and abstracting industry best practices and R&D.  Self Service Portal  With customers being so meticulous about regular updates and reliable access to their data, administrators just cannot think of walking a thin line. Surviving without a resource that provides a track of customer requirements for services available 24 x 7 can severely affect the productivity. In such a scenario, CRMIT’s Self Service Portal (SSP) is the best solution. This not only tracks the required customer data, but also allows companies to stay in tune with their employees, vendors and stakeholders.   One can directly sign up to become a CRMOD contact and SSP user. One need not use the database, as operations and interactions are d at run time. This is a fully configurable solution that tracks results periodically, thus making it easy for end users. It also offers better security and data visibility that enables users to progress smoothly. Quote and Order Management   When dealing with quotes, contracts and orders becomes complicated, only Quote & Order Management can work as a one-stop solution. CRMIT offers this great tool for managing all this information and for taking care of customer orders and service requirements.  This CRM On Demand plug-in allows one to create a new quote or copy the existing one. Products can be directly added from the product list of CRMOD and the pricing is calculated automatically. Quote can be generated and mailed to the external users in PDF, HTML and XLS formats. This not only allows management of quotes in an enhanced manner, but also supports various billing and tax calculation features that make work effortless.    Report Scheduler  When it comes to analyzing and providing statistics of various business processes currently running in an organization, one cannot depend on manual updates, which sometimes may be inaccurate or even delayed. CRMIT provides a SaaS based powerful solution - Report Scheduler - that allows CRM users to schedule reports as per the frequencies and then receive them as email attachments at the scheduled time.   With this powerful tool, administrators can control the report scheduler for assigning specific reports to specific users. After that, users can login and schedule any assigned report for viewing at particular intervals on monthly, weekly or daily basis. Additionally, users can also copy the mail to external users and can choose the preferred format. The best part is that sharing business data with third party become easy with this and for viewing reports, users need not log into their CRMOD account.  CRM On Demand Offline Solution CRM On-Demand Offline is another great CRM++ extension that allows one to work in both online and offline modes. Synchronizing both the modes is absolutely easy and offers ease while working. CRM OD offline works as an automation tool that not only improves efficiency, but also works as a backup in most cases. It is readily available as a windows application installer and requires users to be online only while validating and synchronizing. The best part is that working in the offline mode also works as a backup. 

    Read the article

  • Windows Azure Use Case: Agility

    - by BuckWoody
    This is one in a series of posts on when and where to use a distributed architecture design in your organization's computing needs. You can find the main post here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx  Description: Agility in this context is defined as the ability to quickly develop and deploy an application. In theory, the speed at which your organization can develop and deploy an application on available hardware is identical to what you could deploy in a distributed environment. But in practice, this is not always the case. Having an option to use a distributed environment can be much faster for the deployment and even the development process. Implementation: When an organization designs code, they are essentially becoming a Software-as-a-Service (SaaS) provider to their own organization. To do that, the IT operations team becomes the Infrastructure-as-a-Service (IaaS) to the development teams. From there, the software is developed and deployed using an Application Lifecycle Management (ALM) process. A simplified view of an ALM process is as follows: Requirements Analysis Design and Development Implementation Testing Deployment to Production Maintenance In an on-premise environment, this often equates to the following process map: Requirements Business requirements formed by Business Analysts, Developers and Data Professionals. Analysis Feasibility studies, including physical plant, security, manpower and other resources. Request is placed on the work task list if approved. Design and Development Code written according to organization’s chosen methodology, either on-premise or to multiple development teams on and off premise. Implementation Code checked into main branch. Code forked as needed. Testing Code deployed to on-premise Testing servers. If no server capacity available, more resources procured through standard budgeting and ordering processes. Manual and automated functional, load, security, etc. performed. Deployment to Production Server team involved to select platform and environments with available capacity. If no server capacity available, standard budgeting and procurement process followed. If no server capacity available, systems built, configured and put under standard organizational IT control. Systems configured for proper operating systems, patches, security and virus scans. System maintenance, HA/DR, backups and recovery plans configured and put into place. Maintenance Code changes evaluated and altered according to need. In a distributed computing environment like Windows Azure, the process maps a bit differently: Requirements Business requirements formed by Business Analysts, Developers and Data Professionals. Analysis Feasibility studies, including budget, security, manpower and other resources. Request is placed on the work task list if approved. Design and Development Code written according to organization’s chosen methodology, either on-premise or to multiple development teams on and off premise. Implementation Code checked into main branch. Code forked as needed. Testing Code deployed to Azure. Manual and automated functional, load, security, etc. performed. Deployment to Production Code deployed to Azure. Point in time backup and recovery plans configured and put into place.(HA/DR and automated backups already present in Azure fabric) Maintenance Code changes evaluated and altered according to need. This means that several steps can be removed or expedited. It also means that the business function requesting the application can be held directly responsible for the funding of that request, speeding the process further since the IT budgeting process may not be involved in the Azure scenario. An additional benefit is the “Azure Marketplace”, In effect this becomes an app store for Enterprises to select pre-defined code and data applications to mesh or bolt-in to their current code, possibly saving development time. Resources: Whitepaper download- What is ALM?  http://go.microsoft.com/?linkid=9743693  Whitepaper download - ALM and Business Strategy: http://go.microsoft.com/?linkid=9743690  LiveMeeting Recording on ALM and Windows Azure (registration required, but free): http://www.microsoft.com/uk/msdn/visualstudio/contact-us.aspx?sbj=Developing with Windows Azure (ALM perspective) - 10:00-11:00 - 19th Jan 2011

    Read the article

  • Know Your Audience, And/Or Your Customer

    - by steve.diamond
    Yesterday I gave an internal presentation to about 20 Oracle employees on "messaging," not messaging technology, but embarking on the process of building messages. One of the elements I covered was the importance of really knowing and understanding your audience. As a humorous reference I included two side-by-side photos of Oakland A's fans and Oakland Raiders fans. The Oakland A's fans looked like happy-go-lucky drunk types. The Oakland Raiders fans looked like angry extras from a low budget horror flick. I then asked my presentation attendees what these two groups had in common. Here's what I heard. --They're human (at least I THINK they're human). --They're from Oakland. --They're sports fans. After that, it was anyone's guess. A few days earlier we were putting the finishing touches on a sales presentation for one of our product lines. We had included an upfront "lead in" addressing how the economy is improving, yet that doesn't mean sales executives will have any more resources to add to their teams, invest in technology, etc. This "lead in" included miscellaneous news article headlines and statistics validating the slowly improving economy. When we subjected this presentation to internal review two days ago, this upfront section in particular was scrutinized. "Is the economy really getting better? I (exclamation point) don't think it's really getting better. Haven't you seen the headlines coming out of Greece and Europe?" Then the question TO ME became, "Who will actually be in the audience that sees and hears this presentation? Will s/he be someone like me? Or will s/he be someone like the critic who didn't like our lead-in?" We took the safe route and removed that lead in. After all, why start a "pitch" with a component that is arguably subjective? What if many of our audience members are individuals at organizations still facing a strong headwind? For reasons I won't go into here, it was the right decision to make. The moral of the story: Make sure you really know your audience. Harness the wisdom of the information your organization's CRM systems collect to get that fully informed "customer view." Conduct formal research. Conduct INFORMAL research. Ask lots of questions. Study industries and scenarios that have nothing to do with yours to see "how they do it." Stop strangers in coffee shops and on the street...seriously. Last week I caught up with an old friend from high school who recently retired from a 25 year career with the USMC. He said, "I can learn something from every single person I come into contact with." What a great way of approaching the world. Then, think about and write down what YOU like and dislike as a customer. But also remember that when it comes to your company's products, you are most likely NOT the customer, so don't go overboard in superimposing your own world view. Approaching the study of customers this way adds rhyme, reason and CONTEXT to lengthy blog posts like this one. Know your audience.

    Read the article

  • Oracle Data Integration 12c: Simplified, Future-Ready, High-Performance Solutions

    - by Thanos Terentes Printzios
    In today’s data-driven business environment, organizations need to cost-effectively manage the ever-growing streams of information originating both inside and outside the firewall and address emerging deployment styles like cloud, big data analytics, and real-time replication. Oracle Data Integration delivers pervasive and continuous access to timely and trusted data across heterogeneous systems. Oracle is enhancing its data integration offering announcing the general availability of 12c release for the key data integration products: Oracle Data Integrator 12c and Oracle GoldenGate 12c, delivering Simplified and High-Performance Solutions for Cloud, Big Data Analytics, and Real-Time Replication. The new release delivers extreme performance, increase IT productivity, and simplify deployment, while helping IT organizations to keep pace with new data-oriented technology trends including cloud computing, big data analytics, real-time business intelligence. With the 12c release Oracle becomes the new leader in the data integration and replication technologies as no other vendor offers such a complete set of data integration capabilities for pervasive, continuous access to trusted data across Oracle platforms as well as third-party systems and applications. Oracle Data Integration 12c release addresses data-driven organizations’ critical and evolving data integration requirements under 3 key themes: Future-Ready Solutions : Supporting Current and Emerging Initiatives Extreme Performance : Even higher performance than ever before Fast Time-to-Value : Higher IT Productivity and Simplified Solutions  With the new capabilities in Oracle Data Integrator 12c, customers can benefit from: Superior developer productivity, ease of use, and rapid time-to-market with the new flow-based mapping model, reusable mappings, and step-by-step debugger. Increased performance when executing data integration processes due to improved parallelism. Improved productivity and monitoring via tighter integration with Oracle GoldenGate 12c and Oracle Enterprise Manager 12c. Improved interoperability with Oracle Warehouse Builder which enables faster and easier migration to Oracle Data Integrator’s strategic data integration offering. Faster implementation of business analytics through Oracle Data Integrator pre-integrated with Oracle BI Applications’ latest release. Oracle Data Integrator also integrates simply and easily with Oracle Business Analytics tools, including OBI-EE and Oracle Hyperion. Support for loading and transforming big and fast data, enabled by integration with big data technologies: Hadoop, Hive, HDFS, and Oracle Big Data Appliance. Only Oracle GoldenGate provides the best-of-breed real-time replication of data in heterogeneous data environments. With the new capabilities in Oracle GoldenGate 12c, customers can benefit from: Simplified setup and management of Oracle GoldenGate 12c when using multiple database delivery processes via a new Coordinated Delivery feature for non-Oracle databases. Expanded heterogeneity through added support for the latest versions of major databases such as Sybase ASE v 15.7, MySQL NDB Clusters 7.2, and MySQL 5.6., as well as integration with Oracle Coherence. Enhanced high availability and data protection via integration with Oracle Data Guard and Fast-Start Failover integration. Enhanced security for credentials and encryption keys using Oracle Wallet. Real-time replication for databases hosted on public cloud environments supported by third-party clouds. Tight integration between Oracle Data Integrator 12c and Oracle GoldenGate 12c and other Oracle technologies, such as Oracle Database 12c and Oracle Applications, provides a number of benefits for organizations: Tight integration between Oracle Data Integrator 12c and Oracle GoldenGate 12c enables developers to leverage Oracle GoldenGate’s low overhead, real-time change data capture completely within the Oracle Data Integrator Studio without additional training. Integration with Oracle Database 12c provides a strong foundation for seamless private cloud deployments. Delivers real-time data for reporting, zero downtime migration, and improved performance and availability for Oracle Applications, such as Oracle E-Business Suite and ATG Web Commerce . Oracle’s data integration offering is optimized for Oracle Engineered Systems and is an integral part of Oracle’s fast data, real-time analytics strategy on Oracle Exadata Database Machine and Oracle Exalytics In-Memory Machine. Oracle Data Integrator 12c and Oracle GoldenGate 12c differentiate the new offering on data integration with these many new features. This is just a quick glimpse into Oracle Data Integrator 12c and Oracle GoldenGate 12c. Find out much more about the new release in the video webcast "Introducing 12c for Oracle Data Integration", where customer and partner speakers, including SolarWorld, BT, Rittman Mead will join us in launching the new release. Resource Kits Meet Oracle Data Integration 12c  Discover what's new with Oracle Goldengate 12c  Oracle EMEA DIS (Data Integration Solutions) Partner Community is available for all your questions, while additional partner focused webcasts will be made available through our blog here, so stay connected. For any questions please contact us at partner.imc-AT-beehiveonline.oracle-DOT-com Stay Connected Oracle Newsletters

    Read the article

  • OOW 2013 Summary for Fusion Middleware Architects & Administrators by Simon Haslam

    - by JuergenKress
    OOW 2013 Summary for Fusion Middleware Architects & Administrators by Simon Haslam This September during Oracle OpenWorld 2013 the weather in San Francisco, as you see can from the photo, was exceptionally sunny. The dramatic final few days of the Americas Cup sailing competition, being held every day in the bay, coincided with the conference and meant that there was almost a holiday feel to the whole event. Here's my annual round-up of what I think was most interesting at OpenWorld 2013 for Fusion Middleware architects and administrators; I hope you find it useful and if you think I've missed something please add a comment! WebLogic and Cloud Application Foundation (CAF) The big WebLogic release of the year has already happened a few months ago with 12.1.2 so I won't duplicate that here. Will Lyons discussed the WebLogic and Coherence roadmap which essentially is that 12.1.3 will probably be released to coincide with SOA 12c next year and that 12.1.4, the next feature-rich WebLogic release, is more likely to be in 2015. This latter release will probably include full Java EE 7 support, have enhancements for multi-tenancy and further auto-scaling features to support increased density (i.e. more WebLogic usage for the same amount of hardware). There's a new Oracle Virtual Assembly Builder (OVAB) out already and an Oracle Traffic Director (OTD) 12c release round the corner too. Also of relevance to administrators is that Oracle has increased the support lifetime for Fusion Middleware 11g (e.g. WebLogic 10.3.6) so that Premier Support will now run to the end of 2018 and Extended Support until 2021 - this should remove any Oracle-driven pressure to upgrade at least. Java Mission Control Java Mission Control (JMC) is the HotSpot Java 7 version of JRockit 6 Mission Control, a very nice performance monitoring tool from Oracle's BEA acquisition. Flight Recorder is a feature built into the JVM which records diagnostic events into, typically, a circular buffer which can then be used for historical analysis, particularly in the case of a JVM crash or hang. It's been available separately for WebLogic only for perhaps a year now but, more significantly, it now includes JVM events and was bundled in with JDK7 Update 40 a few weeks ago. I attended a couple of interesting Java One sessions on JMC/Flight Recorder and have to say it's looking really good - it has all the previous JRMC features except for memory leak detector, plus some enhancements around operative sets and ECID filtering I think. Marcus also showed how you could add your own events into flight recorder by building your own event class - they are then available for graphing alongside all the other events in JMC. This uses a currently an unsupported/undocumented API, but it's also the same one that WebLogic uses for WLDF events so I imagine it is stable. I'm not sure quite whether this would be useful to custom applications, as opposed to infrastructure services or ISV packaged applications, but it was a very nice demonstration. I've been testing JMC / FR enabling on several environments recently and my confidence is growing - it feels robust and I think could very soon be part of my standard builds. Read the full article here. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: OOW,Simon Haslam,Oracle OpenWorld,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • Closer look at the SOA 12c Feature: Oracle Managed File Transfer

    - by Tshepo Madigage-Oracle
    The rapid growth of cloud-based applications in the enterprise, combined with organizations' desire to integrate applications with mobile technologies, is dramatically increasing application integration complexity. To meet this challenge, Oracle introduced Oracle SOA Suite 12c, the latest version of the industry's most complete and unified application integration and SOA solution. With simplified cloud, mobile, on-premises, and Internet of Things (IoT) integration capabilities, all within a single platform, Oracle SOA Suite 12c helps organizations speed time to integration, improve productivity, and lower TCO. To extend its B2B solution capabilities with Oracle SOA Suite 12c, Oracle unveiled Oracle Managed File Transfer, an integrated solution that enables organizations to virtually eliminate file transfer complexities. This allows customers to load data securely into Oracle Cloud applications as well as third-party cloud or partner applications. Oracle Managed File Transfer (Oracle MFT) enables secure file exchange and management with internal departments and external partners. It protects against inadvertent access to unsecured files at every step in the end-to-end transfer of files. It is easy to use especially for non technical staff so you can leverage more resources to manage the transfer of files. The extensive reporting capabilities allow you to get quick status of a file transfer and resubmit it as required. You can protect data in your DMZ by using the SSH/FTP reverse proxy. Oracle Managed File Transfer can help integrate applications by transferring files between them in complex use case patterns. Standalone: Transferring files on its own using embedded FTP and sFTP servers and the file systems to which it has access. SOA Integration: a SOA application can be the source or target of a transfer. A SOA application can also be the common endpoint for the target of one transfer and the source of another. B2B Integration: B2B application can be the source or target of a transfer. A B2B application can also be the common endpoint for the target of one transfer and the source of another. Healthcare Integration:  Healthcare application can be the source or target of a transfer. A Healthcare application can also be the common endpoint for the target of one transfer and the source of another. Oracle Service Bus (OSB) integration: OMT can integrate with Oracle Service Bus web service interfaces. OSB interface can be the source or target of a transfer. An Oracle Service Bus interface can also be the common endpoint for the target of one transfer and the source of another. Hybrid Integration: can be one participant in a web of data transfers that includes multiple application types. Oracle Managed File Transfers has four user roles: file handlers, designers, monitors, and administrators. File Handlers: - Copy files to file transfer staging areas, which are called sources. - Retrieve files from file transfer destinations, which are called targets. Designers: - Create, read, update and delete file transfer sources. - Create, read, update and delete file transfer targets. - Create, read, update and delete transfers, which link sources and targets in complete file delivery flows. - Deploy and test transfers. Monitors: - Use the Dashboard and reports to ensure that transfer instances are successful. - Pause and resume lengthy transfers. - Troubleshoot errors and resubmit transfers. - View artifact deployment details and history. - View artifact dependence relationships. - Enable and disable sources, targets, and transfers. - Undeploy sources, targets, and transfers. - Start and stop embedded FTP and sFTP servers. Administrators: - All file handler tasks - All designer tasks - All monitor tasks - Add other users and determine their roles - Configure user directory permissions - Configure the Oracle Managed File Transfer server - Configure embedded FTP and sFTP servers, including security - Configure B2B and Healthcare domains - Back up and restore the Oracle Managed File Transfer configuration - Purge transferred files and instance data - Archive and restore instance data and payloads - Import and export metadata You will find all the related information about SOA 12.1.3. Oracle Manages File Transfer OMT in the documentation: Using Oracle Manages File Transfer Resources and links: Oracle Unveils Oracle SOA Suite 12c Oracle Managed Files Transfer Oracle Managed Files Transfer SOA 12c White Paper For further enquiries don't hesitate to contact us at [email protected] and join our Partner Webcast on Oracle SOA Suite 12c

    Read the article

  • What I've Gained from being a Presenter at Tech Events

    - by MOSSLover
    Originally posted on: http://geekswithblogs.net/MOSSLover/archive/2014/06/12/what-ive-gained-from-being-a-presenter-at-tech-events.aspxI know I fail at blogging lately.  As I've said before life happens and it gets in the way of best laid out plans.  I thought about creating some type of watch with some app that basically dictates using dragon naturally speaking to Wordpress, but alas no time and the write processing capabilities just don't exist yet.So to get to my point Alison Gianotto created this blog post: http://www.snipe.net/2014/06/why-you-should-stop-stalling-and-start-presenting/.  I like the message she has stated in this post and I want to share something personal.It was around 2007 that I was seriously looking into leaving the technology field altogether and going back to school.  I was calling places like Washington University in Saint Louis and University of Missouri Kansas City asking them how I could go about getting into some type of post graduate medical school program.  My entire high school career was based on Medical Explorers and somehow becoming a doctor.  I did not want to take my hobby and continue using it as a career mechanism.  I was unhappy, but I didn't realize why I was unhappy at the time.  It was really a lot of bad things involving the lack of self confidence and self esteem.  Overall I was not in a good place and it took me until 2011 to realize that I still was not in a good place in life.So in about April 2007 or so I started this blog that you guys have been reading or occasionally read.  I kind of started passively stalking people by reading their blogs in the SharePoint and .Net communities.  I also started listening to .Net Rocks & watching videos on their corresponding training for SharePoint, WCF, WF, and a bunch of other technologies.  I wanted more knowledge, so someone suggested I go to a user group.  I've told this story before about how I met Jeff Julian & John Alexander, so that point I will spare you the details.  You know how I got to my first user group presentation and how I started getting involved with events, so I'll also spare those details.The point I want to touch on is that I went out I started speaking and that path I took helped me gain the self confidence and self respect I needed.  When I first moved to NYC I couldn't even ride a subway by myself or walk alone without getting lost.  Now I feel like I can go out and solve any problem someone throws at me.  So you see what Alison states in her blog post is true and I am a great example to that point.  I stood in front of 800 or so people at SharePoint Conference in 2011 and spoke about a topic.  In 2007 I would have hidden or stuttered the entire time.  I have now spoken at over 70 events and user groups.  I am a top 25 influencer in my technology.  I was a most valued professional for years in a row in Microsoft SharePoint.  People are constantly trying to gain my time, so that they can pick my brain for solutions and other life problems.  I went from maybe five or six friends to over hundreds of friends in various cities across the globe.  I'm not saying it's an instant fame and it doesn't take a ton of work, but I have never looked back once at my life and regretted the choice I made in 2007.  It has lead me to a lot of other things in my life, including more positivity and happiness.  If anyone ever wants to contact me and pick my brain on a presentation go ahead.  If you want me to help you find the best meetup that suits you for that presentation I can try to help too (I might be a little more helpful in the Microsoft or iOS arenas though).  The best thing I can state is don't be scared just do it.  If you need an audience I can try to pencil it in my schedule.  I can't promise anything, but if you are in NYC I can at least try.

    Read the article

  • SOA Community Newsletter June 2013

    - by JuergenKress
    Dear SOA partner community member Thanks for showing us your interest to rerun the Fusion Middleware Summer Camps! After knowing your suggestions we are happy to announce the 3rd edition of our advanced Fusion Middleware training. The camps will take place from August 26th - 30th 2013 in Lisbon Portugal. Topics will include Adaptive Case Management (ACM) as part of BPM Suite, b2b, Advanced SOA and SOA Governance. Please make sure you plan and book your seat in advance - (Booking is on the basis of first come first seat!). Thanks for all your efforts to become certified and Specialized. For all the experts who achieved the SOA Suite 11g Essentials or BPM Suite 11g Certified Implementation Specialist, you can download a logo for your blog or business card at the Competence Center. For all the companies who achieved a SOA or BPM specialization you can request a nice Plaques for your office. As part of our Industrial SOA article services we published “Canonizing a Language for Architecture” in the Service Technology Magazine and on Oracle Technology Network. If you write books or a blog - make sure you share it with us! Cloud Computing is the hottest topic in IT, specially as an architect you should be aware of the concepts and technology, therefore I highly recommend you Thomas Erl’s latest book named “Cloud Computing”. In the BPM space, Adaptive Case Management (ACM) is the hottest topic, with BPM PS6 the backend ACM functionality and an ACM sample application are available. You can even combine this hype with Customer Experience. The BPM section in this newsletter reflects the high importance of the topic and includes BPM PS6 video showing process lifecycle,BPM Resource Kit, Functional Testing, Introduction to Web Forms, Customized Workspace Application and Instance Patching Demo. B2B also become more and more popular in the Oracle SOA Suite. If you could not attend the training organized in the month May, we offer you an additional B2B training as a part of the Summer Camps or you can download the B2B training material from our SOA Community Workspace (SOA Community membership required). Thanks to all for sharing the valuable SOA content with our community! Special thanks to ec4u for the new reference of SOA Suite and AIA Foundation Pack at a Swiss insurance company. It is time to submit a SOA and BPM  reference request today! In this edition of the newsletter you will see Guido and Ronald's second part of OSB article series and Kathiravan Udayakumar's published an exclusive article on SOA Suite best practice. If you want to submit your content for the next edition of the Newsletter then please feel free to submit it to myself. The A-Team is an excellent contributor to the best practice - make sure you visit the new A-Team page and read their articles such as Getting to know Maven. Also on the SOA side, we have published many new articles from the community Oracle SOA Suite for the Busy IT Professional by Frank Munz, SOA Suite Knowledge - Polyglot Service Implementation with Groovy by Alexander Suchier, QA82 Analyzer - Automated Quality Assurance for Oracle SOA Suite Projects, Verifying the Target by Anthony Reynolds and a new book called Oracle SOA Governance 11g Implementation book by Luis Augusto Weir. Two new SOA on-demand training courses NEW - Oracle Business Rules Self-Study Course & Introduction Human Workflow online course are available now! Make use of the Summer Time and get trained - hope to see you in Lisbon for the Summer Camps! Jürgen Kress Oracle SOA & BPM Partner Adoption EMEA To read the newsletter please visit http://tinyurl.com/soanewsJune2013 (OPN Account required) To become a member of the SOA Partner Community please register at http://www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: SOA Community newsletter,SOA Community,Oracle,OPN,Jürgen Kress,SOA,BPM

    Read the article

  • Willy Rotstein on Supply Chain Planning

    - by sarah.taylor(at)oracle.com
    Each time a merchandiser, buyer or planner in Retail makes a business decision around assortment, inventory, pricing and promotions there is an opportunity to improve both Profitability and Customer Service. Improving decision making, however, has always been a tricky business for retailers.  I have worked in this space for more than 15 years. I began my career as an academic, at Imperial College London, and then broadened this interest with Retailers, aiming to optimize their merchandising and supply chain decisions. Planning the business and optimizing profit is a complex process. The complexity arises from the variety of people involved, the large number of decisions to take across all business processes, the uncertainty intrinsic to the retail environment as well as the volume of data available for analysis.  Things are not getting any easier either. The advent of multi-channel, social media and mobile is taking these complexities to a new level and presenting additional opportunities for those willing to exploit them. I guess it is due to the complexities of the decision making process that, over the last couple of years working with Oracle Retail, I have witnessed a clear trend around the deployment of planning systems. Retailers are aiming to simplify their decision making processes. They want to use one joined up planning platform across the business and enhance it with "actionable" data mining and optimization techniques. At Oracle Retail, we have a vibrant community of international retailers who regularly come together to discuss the big issues in retail planning. It is a combination of fashion, grocery and speciality retailers, all sharing their best practice vision for planning and optimizing merchandise decisions. As part of the Retail Exchange program, at the recent National Retail Federation event in New York, I jointly hosted a Planning dinner with Peter Fitzgerald from Google UK, Retail Division. Those retailers from our international planning community who were in New York for the annual NRF event were able to attend. The group comprised some of Europe's great International Retail brands.  All sectors were represented by organisations like Mango, LVMH, Ahold, Morrisons, Shop Direct and River Island. They confirmed the current importance of engaging with Planning and Optimization issues. In particular the impact of the internet was a key topic. We had a great debate about new retail initiatives.  Peter highlighted how mobility is changing retail - in particular with the new "local availability search" initiative. We also had an exciting discussion around the opportunities to improve merchandising using the new data that is becoming available from search, social media and ecommerce sites. It will be our focus to continue to help retailers translate this data into better results while keeping their business operations simple. New developments in "actionable" analytics and computing capacity make this a very exciting area today. Watch this space for my contributions on these topics which will be made available through this blog. Oracle Retail has a strong Planning community. if you are a category manager, a planner, a buyer, a merchandiser, a retail supplier or any retail executive with a keen interest in planning then you would be very welcome to join Oracle Retail's Planning Community. As part of our community you will be able to join our in-person and virtual events, download topical white papers and best practice information specifically tailored to your area of interest.  If anyone would like to register their interest in joining our community of retailers discussing planning then please contact me at [email protected]   Willy Rotstein, Oracle Retail

    Read the article

  • Welcome to the Oracle EMEA Partner Community for Exadata!

    - by javier.puerta(at)oracle.com
      The EMEA Partner Community for Exadata is the place where partners in Europe, Middle East and Africa can share experiences and best practices about selling and implementing Exadata projects. You will also receive first-hand information from Oracle on products, training and tools that can help you better market, sell and implement your Exadata-based projects and services    Who should join the Community? Community membership is for individuals. If you are working for a company that is an Oracle partner and your job is selling, implementing or supporting Exadata projects in EMEA then this community is for you.    How is this different from the Oracle Exadata Knowledge Zone? The Oracle Exadata Knowledge Zone is the fundamental source of information from Oracle for partners interested in specializing on Exadata. It is higly recommended that you get access to the Knowledge Zones related to the product areas of your interest. To get access to any of the Knowledge Zones an application must be completed by the Partner Program Administrator for your company. The Exadata Partner Community complements the Knowledge Zone by providing partners with information which is specific for the EMEA market (market, references, training, events,..) and it is also a mechanism to share experiences and best practices among partners in marketing, selling, implementing and supporting Exadata projects.   How to join?  For you to be able to register as an individual, your company must be member of the Oracle PartnerNetwork (OPN) and should be working towards becoming OPN Specialized in Exadata. If this is the case then Join the EMEA Exadata Partner Community Now! If your company is not an OPN member yet, then Join Oracle PartnerNetwork first.   How do you get access to the information for the community members? We use two mechanisms to provide and share information: The EMEA Exadata Partner Community blog. This is a public blog and we use it to provide  quick and easy communication to the community members. For detailed or restricted material we will point you to a restricted area. The EMEA Exadata Partner Community Collaborative Workspace. This is an area with restricted access that only community members can access. It contains materials from community events, sales kits, implementation experiences,... reserved to community members. It also allows for partners to share content and collaborate with other community members. You will get access to this restricted area when you register as a member of the EMEA Exadata Partner Community     Need help? I hope that you will find useful the resources and the experience exchange provided by the community. If you need help or any further clarification, don't hesitate to contact me!  Javier Puerta ([email protected])Director Core Technology Partner ProgramsAlliances & Channels EMEAPhone: +34916312141 Mobile: +34609062373   

    Read the article

< Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >