Search Results

Search found 6288 results on 252 pages for 'credit card'.

Page 129/252 | < Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >

  • Which connector do I need for a "line level" subwoofer?

    - by Ben Brocka
    I've got a separate pair of speakers and I'm looking at adding a subwoofer (this, specifically). I noticed on the detail page it's inputs are listed as such: Inputs: Speaker level, line level If I'm not mistaken "line level" are the standard 3.5 audio jacks on your motherboard/sound card, right? My motherboard has the standard 6 ports for sound, if I get a subwoofer like this can I simply plug the input into the orange 3.5 jack? My audio software supports up to 7.1 so software-wise, 2.1 wouldn't be a problem.

    Read the article

  • Ubuntu 9.10 Nvidia GTX 260 x64 installation

    - by klapi
    I think I tried everything I could but I still can't get my Nvidia GTX 260 to run on the newest ubuntu 9.10 x64. Update: I was able to stop the gdm with sudo service gdm stop However, after downloading the latest driver from nvdia - I am told that my video card is not supported.

    Read the article

  • Desktop G4: Wireless?

    - by Yar
    I just inherited a G4 Server (I don't know much about it, except that it runs 10.4 and cannot go beyond that). It does not have an Airport connection. How would I figure out what kind of card or network interface I need for Wifi?

    Read the article

  • Ubuntu 9.10 upgraded with Internet connection fail

    - by Neofizz
    I am pretty sure that the latest Ubuntu release does not support my wireless internet card. Everything was working fine in 9.04 and since upgrading my browser will load web pages. I can see and connect to my wep encrypted network. I can ping google.com and lose no packets. I am at the end of my tether, what else can I try? Is it possible to download a driver to re-enable my wireless?

    Read the article

  • Inbound connections to a ubuntu machine running a VPN

    - by shanedowling
    Is it possible to open inbound connections to a machine connected to a VPN server? The machine is running ubuntu 9.10 with two network devices(a wireless card and ethernet port), I can connect to my machine locally using a local ip but when I try port forward using my router I can't connect from my external ip. Is there a way around this? I figure with 2 network devices I can vpn over one and use the other for inbound connections but I can't figure out how to do this. Thanks

    Read the article

  • Intel 82865G Graphics Controller - making it work in Windows 7

    - by abrams
    RE: Putting this out there in case someone else runs into this issue. The intel chipset is on-board. I discovered the reason for the crappy resolution in windows 7 was that the memory to share with the video card was set to 1MB in the BIOS. I changed this to 8MB (the maximum) and then the PC rebooted I was able to select a higher resolution. link|flag answered Aug 18 '09 at 5:53 Nick Kavadias Nick, Does this give Aero functionalty ?

    Read the article

  • Default setting for dual monitors (using Win+P)

    - by Tomek
    I have two displays (one monitor and one TV) connected to my card via DVI. I switch between them with Win+P (when I'm using XBMC I set "only projector"). Most of the time, I use it during late hours, so I just turn off the PC (with XBMC's option "shutdown") and go to sleep. All fine, but on the next day my display is changed (to "only projector"). Bottom line is - how can I set my Windows 7 to have "only monitor" each time system boots?

    Read the article

  • Add second ip address to an existing SQl 2008 failover clustering

    - by Cédric Boivin
    Hello, I got actually a failover cluster on Windows Server 2008, with sql server 2008. On each server i got two network card, with two different network one are on 10.10.10.x and other are on 192.168.99.x I want my sqlserver cluster listen on the two network. Is it possible and how i add new ip address. When i add a new ip address directly in the cluster, and i do a telnet on the 1433 port with the new cluster ip address it's not working. Thanks

    Read the article

  • Windows Server not installing audio drivers properly

    - by Adrian
    I am trying to install a dummy sound card on a Windows Server machine (in Amazon EC2 cloud) in order for one of my application to work. I'm trying to accomplish that with Virtual Audio Cable and REAUDIO3. Both tools managed to install a new device on my Windows XP machine, but on Windows Server, no new devices appear. Windows Audio and Plug and Play services are Started and Automatic. ANY ideas are greatly appreciated.

    Read the article

  • Cannot access boot menu with compaq 8510p

    - by pinouchon
    I have a problem with my HP compaq 8510p laptop: when I start it, the fan starts and the power light is on, but the screen displays nothing. When I insert a bootable hard drive, it activates the hard drive light (meaning that the CD is recognized) but it stops after a few seconds. Same thing with any hard drive: the drive is recognized but does not boot. What I've tried so far: Changing the hard drive or booting with no hard drive (same problem) Plugging anoher display via VGA : no display on the other screen Inserting a windows-7 CD (same problem) Booting only on battery, with battery and power cable, only with power cable (same problem) So it looks like something is preventing the laptop from booting and displaying the boot menu. Do you have experienced something similar with a laptop ? What could be wrong ? The laptop is out of warranty. The system used to be windows-7 x64. Edit: I went to the help desk of my university. A guy took a look (he also tried to plug an external screen) and said that the computer is dead: on the HP laptops eventually the GPU card dies and so does the motherboard because they are linked. He saw this many times, and even if I can fix the problem, the laptop would crash again after a while. Do you have similar experience with HP laptops ? (mine is 4 years old) Edit 2: Believe it or not, my laptop is magically working again. I have no clue about what is going on. Now it is like starting and old car: when you turn it on you secretly hope it will actually start... With that said, I expect my laptop to break again in the near future (its an HP after all) and I will accept an answer or add my own accordingly. Edit 3: As expected, the laptop is down again. This time, sometimes when I power it up, it shuts down automatically after 3 seconds, sometimes not at all. In addition, when it does not shut down on its own, the power button does not work : the only way to shut it down is by unplugging the battery. As before, the screen is black, and only the power and battery lights are on. (the other ones: hard drive and wifi are off). I have tried to plug in another power plug, removing the battery and removing the hard drive without success. I might buy another laptop. I've brought the laptop to a repair shop. The problem is indeed that the graphic card is down. It will be replaced by a new one.

    Read the article

  • Does ZFS replace the need for hardware/software RAID?

    - by user53744
    I want to provide protection against data loss on my servers. Typically, I'd use hardware RAID 1 or 5, but I've been reading up on ZFS. Is it correct that ZFS itself provides RAID 1 or 5 like data protection WITHOUT needing a RAID controller card? If so, I assume a single hard drive is not enough to provide data protection since if that drive fails, all data fails, so how many hard drives do I need to be running for ZFS to provide this protection?

    Read the article

  • Users take over a minute to log onto a 2008 windows server. LSM.exe running at 100MB+ memory.

    - by seanyboy
    We've a 64bit Windows Server 2008 running Remote Desktop. The application lsm.exe (the local session manager) appears to be leaking memory. Although the memory usage is quite low when the server is rebooted, this continues to climb until people can no longer log in. The server has no audio card and does not have any AV software installed. The server is fully service packed. (Service pack 2) What could be causing this, and how would I fix it?

    Read the article

  • Is the following combination of components valid to function as a desktop computer? [closed]

    - by Gideon Potgieter
    Could someone with more PC building experience than me tell me whether these PC components can cooperate fully as a self-made PC? Processor: Intel Core i5-3570K Video card: Asus Radeon HD 7870 Motherboard: Gigabyte GA-Z77-D3H RAM: Corsair CMZ16GX3M2A1600C10 Vengeance 16GB 1600MHz CL10 DDR3 (x2) Storage: Western Digital WD1002FAEX (x2) Display: Samsung S24B300HL Sound: Logitech X140 Chassis: Thermaltake V4 Black Edition VM30001W2Z Power supply: Seagate OEM 500W Builder PSU Optical drive: Asus DRW-24B1ST Thanks in advance! (btw, I know 32 GB RAM is unnecessary, but I want to buy it to use as a reserve)

    Read the article

  • Problem with Ubuntu 10.04 and ATI

    - by Maximilinao
    I'm having a problem installing the drivers from the video card. Just finished installing the driver, reboot my OS, and my monitor is starting off in energy saving mode and does not boot Ubuntu. What I can do? Sorry for my English. I used the Google translator.

    Read the article

  • External WiFi Adapter for Eee PC 1000?

    - by Peter M
    I have an original Eee PC 1000 running the stock Xandros. I have run into problems where the internal WiFi card does not seem to have enough sensitivity to connect to a lot of access points. Although the computer will report APs in the area, unless the signal strength is over 80% (as reported by the Wireless networks application) I cannot seem get a connection. So is there a recommended USB WiFi adapter that is known to work with the Eee PC/Xandros system or in general with a Debian based system?

    Read the article

  • Easy way to switch default sound output device

    - by robertpateii
    I want an easier way to change my default sound device from my sound card to my usb headset. Currently it takes a very precise right click, a left click, another right click, and two more left clicks. Ideally i could just have it swap with a shortcut key. (it was a little easier in XP but not by much.) A software solution is preferred, but I am open to suggestions that use hardware. I am running Windows 7 currently.

    Read the article

  • Low FPS in some games, but hardware not fully used

    - by Mario De Schaepmeester
    I just did a little funny experiment in the game/sim "Train Simulator 2013". I normally have good FPS in it (around 30) at full settings. What I did was make a really, really long train so that the calculations the sim needed to make were enormous (the sim is quite realistic, it takes all things into account like speed/acceleration, G-forces, comfort levels, possible wheel slip and many more, and most of those things on each carriage seperately). This resulted in only 14FPS as reported by the game, but it felt more like 8FPS or so. I have a Logitech G15 keyboard which has an LCD, and it allows me to monitor CPU/RAM and video card load on it. The strange thing is, all CPU cores were busy, but the total load was only about 60% maximum at all times. The video card was only on 30% load (possibly an important note, the memory was full, which is however not unusual for the game in question). The RAM had plenty of room and there weren't many operations as it didn't grow or shrink much. I just have the feeling that the game would run smoother if it used more of my hardware power. Why is it not doing so? I had the same in another game, The Elder Scrolls: Morrowind when using more than 100 mods (that all use scripting) and a few high res texture mods, + a full-on graphics improvement program. The engine is very old (2003), and so I thought this might be the cause (not being optimised for multithreading). I had thought of possible causes, like: The operating system doesn't let the games use all the resources. It doesn't make use of multi-threading appropriately. To eliminate the former, I tried a CPU stress tool and that got 100% CPU juice as I let it run, so the OS is not the problem. I gave its thread the "higher" priority though. My actual question In both games, I did things the engine was not really built to do or support. Can those games' framerate be limited cause of their own engine not being able to cope? What is the real reason and more importantly, can I help it? And in any case, could something actually be wrong with my hardware? It's all reasonably new, a couple of months, and I (almost) never experience any other trouble. Modern and much more demanding games work absolutely fine. Specs CPU: AMD Phenom II 965 X4 @ 3.4gHz RAM: 8GB of DDR3 RAM Video: MSI GTX560 (nVidia chip) with 1GB of GDDR5 memory OS: Windows 7 Ultimate 64 bit Nothing overclocked.

    Read the article

  • How to tell if a Nexus One is unlocked?

    - by Pablo Fernandez
    Is there a way I can tell just by looking at the phone if it is unlocked and works with any carrier? Explanation: I'm going to buy the phone from a guy, and he is not sure if the phone is unlocked or not. The phone is still in a box, it was a gift and came with a T-mobile SIM card that he never used. He is not paying any monthly fee for it.

    Read the article

  • How to change boot first screen resultion

    - by Joshua
    when i start my pc when the first screen i see the resultion is small but when it gets to log in screen its good how di i change the resultion screen size of the first screen thats the screen thats small and the log in screen and when i log in all thats good only that screen pls help me someone thanks the graphic card is gtx 680 thanks im not sure wht topic this goes in It worked perfectly one day I didn't read the nividia 3d thing and i didn't read and i unstalled the drivers and that change and then later installed it back after how do I fix this? Thanks

    Read the article

  • Computer runs but monitor is on power saving mode?

    - by IMB
    This stuff rarely happens, but when it does I simply restart my PC then it works fine. But today after several restart attempts it seems to be stuck. I tried removing the video card then switched to onboard video, same thing: The PC runs, (there's power and fans are working) but the monitor is stuck on power saving mode (blank screen). Is this a monitor or PC problem? Any ideas what might be the problem? I'm Windows 7 btw.

    Read the article

  • Increase Linux screen resolution

    - by David Gard
    I'm running an install of CentOS 5.5 virtually and for some reason I only have 2 available screen resolutions - 800x600 and 640x480. Does anybody know how I can add some bigger resolutions? I've had a look in /etc/X11/xorg.conf and it is knows that the graphics card is virtual, but even listing the resolutions that I want fails. Here is the default screen section - Secton "Screen" Identifiew "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection And here is what I tried adding to SubSection "Display" - Mode "1024x768" "1280x1024"

    Read the article

  • Three monitor setup not working on Server 2012

    - by maxp
    Using an ATI firepro 4800 card, with three monitors connected (1 dvi, 2 displayport) on Server 2008 R2 worked fine. Ive now moved to a new machine, although identical spec, with a fresh Server 2012 install, and cannot get a three display output - only two. When I try to extend the display on to the third monitor, I get the message "The display settings could not be saved. Please try a different combination of display settings" The machine is a Dell Precision T1600. Any help appreciated.

    Read the article

< Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >