Search Results

Search found 3496 results on 140 pages for 'reset'.

Page 129/140 | < Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >

• Why does my macbook pro have long ping times over wifi?

  - by randynov

  I have been having problems connecting with my wifi. It is weird, the ping times to the router (<30 feet away) seem to surge, often getting over 10s before slowly coming back down. You can see the trend below. I'm on a macbook pro and have done the normal stuff (reset the pram and smc, changed wireless channels, etc.). It happens across different routers, so I think it must be my laptop, but I don't know what it could be. The RSSI value hovers around -57, but I've seen the transmit rate flip between 0, 48 & 54. The signal strength is ~60% with 9% noise. Currently, there are 17 other wireless networks in range, but only one in the same channel. 1 - How can I figure out what's going on? 2 - How can I correct the situation? TIA! Randall PING 192.168.1.1 (192.168.1.1): 56 data bytes 64 bytes from 192.168.1.1: icmp_seq=0 ttl=254 time=781.107 ms 64 bytes from 192.168.1.1: icmp_seq=1 ttl=254 time=681.551 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=254 time=610.001 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=254 time=544.915 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=254 time=547.622 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=254 time=468.914 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=254 time=237.368 ms 64 bytes from 192.168.1.1: icmp_seq=7 ttl=254 time=229.902 ms 64 bytes from 192.168.1.1: icmp_seq=8 ttl=254 time=11754.151 ms 64 bytes from 192.168.1.1: icmp_seq=9 ttl=254 time=10753.943 ms 64 bytes from 192.168.1.1: icmp_seq=10 ttl=254 time=9754.428 ms 64 bytes from 192.168.1.1: icmp_seq=11 ttl=254 time=8754.199 ms 64 bytes from 192.168.1.1: icmp_seq=12 ttl=254 time=7754.138 ms 64 bytes from 192.168.1.1: icmp_seq=13 ttl=254 time=6754.159 ms 64 bytes from 192.168.1.1: icmp_seq=14 ttl=254 time=5753.991 ms 64 bytes from 192.168.1.1: icmp_seq=15 ttl=254 time=4754.068 ms 64 bytes from 192.168.1.1: icmp_seq=16 ttl=254 time=3753.930 ms 64 bytes from 192.168.1.1: icmp_seq=17 ttl=254 time=2753.768 ms 64 bytes from 192.168.1.1: icmp_seq=18 ttl=254 time=1753.866 ms 64 bytes from 192.168.1.1: icmp_seq=19 ttl=254 time=753.592 ms 64 bytes from 192.168.1.1: icmp_seq=20 ttl=254 time=517.315 ms 64 bytes from 192.168.1.1: icmp_seq=37 ttl=254 time=1.315 ms 64 bytes from 192.168.1.1: icmp_seq=38 ttl=254 time=1.035 ms 64 bytes from 192.168.1.1: icmp_seq=39 ttl=254 time=4.597 ms 64 bytes from 192.168.1.1: icmp_seq=21 ttl=254 time=18010.681 ms 64 bytes from 192.168.1.1: icmp_seq=22 ttl=254 time=17010.449 ms 64 bytes from 192.168.1.1: icmp_seq=23 ttl=254 time=16010.430 ms 64 bytes from 192.168.1.1: icmp_seq=24 ttl=254 time=15010.540 ms 64 bytes from 192.168.1.1: icmp_seq=25 ttl=254 time=14010.450 ms 64 bytes from 192.168.1.1: icmp_seq=26 ttl=254 time=13010.175 ms 64 bytes from 192.168.1.1: icmp_seq=27 ttl=254 time=12010.282 ms 64 bytes from 192.168.1.1: icmp_seq=28 ttl=254 time=11010.265 ms 64 bytes from 192.168.1.1: icmp_seq=29 ttl=254 time=10010.285 ms 64 bytes from 192.168.1.1: icmp_seq=30 ttl=254 time=9010.235 ms 64 bytes from 192.168.1.1: icmp_seq=31 ttl=254 time=8010.399 ms 64 bytes from 192.168.1.1: icmp_seq=32 ttl=254 time=7010.144 ms 64 bytes from 192.168.1.1: icmp_seq=33 ttl=254 time=6010.113 ms 64 bytes from 192.168.1.1: icmp_seq=34 ttl=254 time=5010.025 ms 64 bytes from 192.168.1.1: icmp_seq=35 ttl=254 time=4009.966 ms 64 bytes from 192.168.1.1: icmp_seq=36 ttl=254 time=3009.825 ms 64 bytes from 192.168.1.1: icmp_seq=40 ttl=254 time=16000.676 ms 64 bytes from 192.168.1.1: icmp_seq=41 ttl=254 time=15000.477 ms 64 bytes from 192.168.1.1: icmp_seq=42 ttl=254 time=14000.388 ms 64 bytes from 192.168.1.1: icmp_seq=43 ttl=254 time=13000.549 ms 64 bytes from 192.168.1.1: icmp_seq=44 ttl=254 time=12000.469 ms 64 bytes from 192.168.1.1: icmp_seq=45 ttl=254 time=11000.332 ms 64 bytes from 192.168.1.1: icmp_seq=46 ttl=254 time=10000.339 ms 64 bytes from 192.168.1.1: icmp_seq=47 ttl=254 time=9000.338 ms 64 bytes from 192.168.1.1: icmp_seq=48 ttl=254 time=8000.198 ms 64 bytes from 192.168.1.1: icmp_seq=49 ttl=254 time=7000.388 ms 64 bytes from 192.168.1.1: icmp_seq=50 ttl=254 time=6000.217 ms 64 bytes from 192.168.1.1: icmp_seq=51 ttl=254 time=5000.084 ms 64 bytes from 192.168.1.1: icmp_seq=52 ttl=254 time=3999.920 ms 64 bytes from 192.168.1.1: icmp_seq=53 ttl=254 time=3000.010 ms 64 bytes from 192.168.1.1: icmp_seq=54 ttl=254 time=1999.832 ms 64 bytes from 192.168.1.1: icmp_seq=55 ttl=254 time=1000.072 ms 64 bytes from 192.168.1.1: icmp_seq=58 ttl=254 time=1.125 ms 64 bytes from 192.168.1.1: icmp_seq=59 ttl=254 time=1.070 ms 64 bytes from 192.168.1.1: icmp_seq=60 ttl=254 time=2.515 ms

  Read the article

• How do I use MediaRecorder to record video without causing a segmentation fault?

  - by rabidsnail

  I'm trying to use android.media.MediaRecorder to record video, and no matter what I do the android runtime segmentation faults when I call prepare(). Here's an example: public void onCreate(Bundle savedInstanceState) { Log.i("video test", "making recorder"); MediaRecorder recorder = new MediaRecorder(); contentResolver = getContentResolver(); try { super.onCreate(savedInstanceState); Log.i("video test", "--------------START----------------"); SurfaceView target_view = new SurfaceView(this); Log.i("video test", "making surface"); Surface target = target_view.getHolder().getSurface(); Log.i("video test", target.toString()); Log.i("video test", "new recorder"); recorder = new MediaRecorder(); Log.i("video test", "set display"); recorder.setPreviewDisplay(target); Log.i("video test", "pushing surface"); setContentView(target_view); Log.i("video test", "set audio source"); recorder.setAudioSource(MediaRecorder.AudioSource.MIC); Log.i("video test", "set video source"); recorder.setVideoSource(MediaRecorder.VideoSource.DEFAULT); Log.i("video test", "set output format"); recorder.setOutputFormat(MediaRecorder.OutputFormat.THREE_GPP); Log.i("video test", "set audio encoder"); recorder.setAudioEncoder(MediaRecorder.AudioEncoder.AMR_NB); Log.i("video test", "set video encoder"); recorder.setVideoEncoder(MediaRecorder.VideoEncoder.MPEG_4_SP); Log.i("video test", "set max duration"); recorder.setMaxDuration(3600); Log.i("video test", "set on info listener"); recorder.setOnInfoListener(new listener()); Log.i("video test", "set video size"); recorder.setVideoSize(320, 240); Log.i("video test", "set video frame rate"); recorder.setVideoFrameRate(15); Log.i("video test", "set output file"); recorder.setOutputFile(get_path(this, "foo.3gp")); Log.i("video test", "prepare"); recorder.prepare(); Log.i("video test", "start"); recorder.start(); Log.i("video test", "sleep"); Thread.sleep(3600); Log.i("video test", "stop"); recorder.stop(); Log.i("video test", "release"); recorder.release(); Log.i("video test", "-----------------SUCCESS------------------"); finish(); } catch (Exception e) { Log.i("video test", e.toString()); recorder.reset(); recorder.release(); Log.i("video tets", "-------------------FAIL-------------------"); finish(); } } public static String get_path (Context context, String fname) { String path = context.getFileStreamPath("foo").getParentFile().getAbsolutePath(); String res = path+"/"+fname; Log.i("video test", "path: "+res); return res; } class listener implements MediaRecorder.OnInfoListener { public void onInfo(MediaRecorder recorder, int what, int extra) { Log.i("video test", "Video Info: "+what+", "+extra); } }

  Read the article

• ASP.NET resseting SessionID cookie when cookie expiration date is set

  - by Sergej Andrejev

  I have two pages: Default.aspx and WebForm1.aspx. One of these pages stores a session variable which works fine until I add code which ads expiration date to SessionID cookie. What happens is: Open default.aspx Set-Cookie ASP.NET_SessionId=14jhsdfq23jkh13jkh12k1; expires=Fri, 19-Mar-2010 07:31:47 GMT; path=/ Click on link to open WebForm1.aspx No cookies set Click on link to open Default.aspx (Cookie is reset) Set-Cookie ASP.NET_SessionId=; expires=Fri, 19-Mar-2010 07:31:47 GMT; path=/ So the question would be how should I set SessionID cookie expiration date correctly? Default.aspx.cs using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; namespace WebApplication1 { public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { lnk.Click += new EventHandler(lnk_Click); Session["t"] = Guid.NewGuid(); Response.Cookies["ASP.NET_SessionId"].Expires = DateTime.Now.AddDays(2); } void lnk_Click(object sender, EventArgs e) { Response.Redirect("WebForm1.aspx"); } } } Default.aspx <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="WebApplication1._Default" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title></title> </head> <body> <form id="form1" runat="server"> <div> <asp:LinkButton runat="server" ID="lnk" Text=">>>" /> </div> </form> </body> </html> WebForm1.aspx.cs using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; namespace WebApplication1 { public partial class WebForm1 : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { lnk.Click += new EventHandler(lnk_Click); } void lnk_Click(object sender, EventArgs e) { Response.Redirect("Default.aspx"); } } } WebForm1.aspx <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="WebForm1.aspx.cs" Inherits="WebApplication1.WebForm1" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title></title> </head> <body> <form id="form1" runat="server"> <div> <asp:LinkButton runat="server" ID="lnk" Text=">>>" /> </div> </form> </body> </html>

  Read the article

• All downloads being interrupted

  - by Jake

  System: Windows 7 Professional 64bit. 8GB RAM, Intel i5-2400 CPU, +300GB free on the hard drive. AVG Internet Security 2012 (enabled & disabled, with firewall enabled and disabled - no effect for either). This computer is less than a year old. Network: This problem is occurring on a single computer on a network with multiple computers. The router is a Motorola Netopia 3347-02 (DSL Modem/Wireless Router combined). The computer is plugged in directly to the modem, other computers are using the wireless successfully. The router has been reset. The only thing odd about the connection between the router and computer is that it is configured to allow RDP through, so it is assigned a static IP by the router and port forwarding is enabled for port 3389. Also, though I doubt it matters, a second wireless router is active behind this router providing a second network that some computers in the area use without issues. Details: All downloads initiated on this specific computer eventually fail, this includes streaming from youtube, specialized downloads (itunes), downloads from websites, FTP downloads, etc. Failure occurs with all browsers, but in chrome this is the process it takes: 1) Download begins normally, 2) At some point between (observed) 7MBs and 229MBs the download stops progressing (at this point, if watching chrome's task manager, you can see the network activity for the downloading tab drop to 0kps), 3) for some time the download sits there still attempting to complete, but will eventually display "123,049,871/0 B, Interrupted" (where the number is whatever it actually got to). The file I am using to test this is a very large .zip file located on a server I control, but the problem seems to occur on any site. The amount downloaded is completely random, and seems to be more time-based than anything (if I start a download immediately after the last one fails, it tends to get further than the last one). Small files can get through for this reason, though they can fail as well. In a test where I simultaneously downloaded the same file via HTTP (chrome) and FTP (windows explorer), both downloads failed at the same instant, though explorer displayed "Connection timed out" several minutes before chrome finally showed the download as interrupted. Other things I have tried based on advice given to people with similar/identical problems: Setting my MTU to 1492 (as described here: http://blog.thecompwiz.com/2011/08/networking-issues.html) Disabling write caching to the hard drive storing the download on an external device successfully transmitted +1GB file from one computer on the same network to this computer disabling indexing in the folder the download was being stored in disabling all security software checked to make sure all drivers were up to date read about 50 accounts with nearly exact descriptions of what I'm experiencing, none of which had a solution given Running Processes: Image Name PID Session Name Session# Mem Usage ========================= ======== ================ =========== ============ System Idle Process 0 Services 0 24 K System 4 Services 0 104,836 K smss.exe 332 Services 0 1,276 K csrss.exe 764 Services 0 5,060 K wininit.exe 820 Services 0 4,748 K csrss.exe 844 Console 1 23,764 K services.exe 876 Services 0 11,856 K lsass.exe 892 Services 0 14,420 K lsm.exe 900 Services 0 7,820 K winlogon.exe 944 Console 1 7,716 K svchost.exe 428 Services 0 12,744 K svchost.exe 796 Services 0 12,240 K svchost.exe 1036 Services 0 22,372 K svchost.exe 1084 Services 0 174,132 K svchost.exe 1112 Services 0 56,144 K svchost.exe 1288 Services 0 18,640 K svchost.exe 1404 Services 0 29,616 K spoolsv.exe 1576 Services 0 25,924 K svchost.exe 1616 Services 0 12,788 K AppleMobileDeviceService. 1728 Services 0 9,796 K avgwdsvc.exe 1820 Services 0 8,268 K mDNSResponder.exe 1844 Services 0 5,832 K w3dbsmgr.exe 1108 Services 0 43,760 K QBCFMonitorService.exe 1336 Services 0 16,408 K svchost.exe 2404 Services 0 28,240 K taskhost.exe 3020 Console 1 12,372 K dwm.exe 2280 Console 1 5,968 K explorer.exe 2964 Console 1 152,476 K WUDFHost.exe 3316 Services 0 6,740 K svchost.exe 3408 Services 0 5,556 K RAVCpl64.exe 3684 Console 1 13,864 K igfxtray.exe 3700 Console 1 7,804 K hkcmd.exe 3772 Console 1 7,868 K igfxpers.exe 3788 Console 1 10,940 K sidebar.exe 3836 Console 1 84,400 K chrome.exe 3964 Console 1 19,640 K pptd40nt.exe 4068 Console 1 5,156 K acrotray.exe 3908 Console 1 14,676 K avgtray.exe 3872 Console 1 9,508 K jusched.exe 4076 Console 1 4,412 K iTunesHelper.exe 1532 Console 1 87,308 K SearchIndexer.exe 3492 Services 0 36,948 K iPodService.exe 4136 Services 0 7,944 K BrccMCtl.exe 4276 Console 1 18,132 K splwow64.exe 4380 Console 1 32,600 K qbupdate.exe 4836 Console 1 24,236 K svchost.exe 4288 Services 0 20,700 K wmpnetwk.exe 3112 Services 0 9,516 K FNPLicensingService.exe 5248 Services 0 5,852 K QBW32.EXE 5508 Console 1 127,068 K QBDBMgrN.exe 5600 Services 0 42,252 K EXCEL.EXE 2512 Console 1 99,100 K LMS.exe 3188 Services 0 5,616 K UNS.exe 1600 Services 0 7,308 K axlbridge.exe 5260 Console 1 5,132 K chrome.exe 5888 Console 1 200,336 K chrome.exe 3536 Console 1 26,076 K chrome.exe 1952 Console 1 20,168 K chrome.exe 4596 Console 1 24,696 K chrome.exe 4292 Console 1 48,096 K chrome.exe 2796 Console 1 23,520 K Acrobat.exe 1240 Console 1 87,252 K 123w.exe 4892 Console 1 22,728 K calc.exe 1700 Console 1 12,636 K chrome.exe 1328 Console 1 28,888 K chrome.exe 3696 Console 1 47,012 K rundll32.exe 6320 Console 1 7,104 K chrome.exe 4928 Console 1 44,248 K AVGIDSAgent.exe 260 Services 0 12,940 K avgfws.exe 6052 Services 0 26,912 K avgnsa.exe 5064 Services 0 2,496 K avgrsa.exe 3088 Services 0 2,200 K avgcsrva.exe 2596 Services 0 380 K avgcsrva.exe 6948 Services 0 408 K StikyNot.exe 452 Console 1 14,772 K chrome.exe 4580 Console 1 28,200 K chrome.exe 4016 Console 1 57,756 K svchost.exe 7140 Services 0 4,500 K chrome.exe 6264 Console 1 56,824 K chrome.exe 7008 Console 1 56,896 K chrome.exe 2224 Console 1 38,032 K taskhost.exe 612 Console 1 7,228 K chrome.exe 6000 Console 1 10,928 K chrome.exe 2568 Console 1 43,052 K chrome.exe 272 Console 1 75,988 K chrome.exe 7328 Console 1 53,240 K PaprPort.exe 7976 Console 1 137,152 K pplinks.exe 7500 Console 1 14,052 K ppscanmg.exe 5744 Console 1 18,996 K taskeng.exe 7388 Console 1 6,308 K SearchProtocolHost.exe 8024 Services 0 8,804 K SearchFilterHost.exe 7232 Services 0 7,848 K chrome.exe 8016 Console 1 37,440 K cmd.exe 7692 Console 1 3,096 K conhost.exe 7516 Console 1 5,872 K tasklist.exe 8160 Console 1 5,772 K WmiPrvSE.exe 7684 Services 0 6,400 K Any help with this would be greatly appreciated, I've been beating my head against a wall over this all day. This computer serves dual purpose as the main company document server and the Owner's work computer, it's fairly important it be fully functional and I cannot figure this out.

  Read the article

• Emulating old-school sprite flickering (theory and concept)

  - by Jeffrey Kern

  I'm trying to develop an oldschool NES-style video game, with sprite flickering and graphical slowdown. I've been thinking of what type of logic I should use to enable such effects. I have to consider the following restrictions if I want to go old-school NES style: No more than 64 sprites on the screen at a time No more than 8 sprites per scanline, or for each line on the Y axis If there is too much action going on the screen, the system freezes the image for a frame to let the processor catch up with the action From what I've read up, if there were more than 64 sprites on the screen, the developer would only draw high-priority sprites while ignoring low-priority ones. They could also alternate, drawing each even numbered sprite on opposite frames from odd numbered ones. The scanline issue is interesting. From my testing, it is impossible to get good speed on the XBOX 360 XNA framework by drawing sprites pixel-by-pixel, like the NES did. This is why in old-school games, if there were too many sprites on a single line, some would appear if they were cut in half. For all purposes for this project, I'm making scanlines be 8 pixels tall, and grouping the sprites together per scanline by their Y positioning. So, dumbed down I need to come up with a solution that.... 64 sprites on screen at once 8 sprites per 'scanline' Can draw sprites based on priority Can alternate between sprites per frame Emulate slowdown Here is my current theory First and foremost, a fundamental idea I came up with is addressing sprite priority. Assuming values between 0-255 (0 being low), I can assign sprites priority levels, for instance: 0 to 63 being low 63 to 127 being medium 128 to 191 being high 192 to 255 being maximum Within my data files, I can assign each sprite to be a certain priority. When the parent object is created, the sprite would randomly get assigned a number between its designated range. I would then draw sprites in order from high to low, with the end goal of drawing every sprite. Now, when a sprite gets drawn in a frame, I would then randomly generate it a new priority value within its initial priority level. However, if a sprite doesn't get drawn in a frame, I could add 32 to its current priority. For example, if the system can only draw sprites down to a priority level of 135, a sprite with an initial priority of 45 could then be drawn after 3 frames of not being drawn (45+32+32+32=141) This would, in theory, allow sprites to alternate frames, allow priority levels, and limit sprites to 64 per screen. Now, the interesting question is how do I limit sprites to only 8 per scanline? I'm thinking that if I'm sorting the sprites high-priority to low-priority, iterate through the loop until I've hit 64 sprites drawn. However, I shouldn't just take the first 64 sprites in the list. Before drawing each sprite, I could check to see how many sprites were drawn in it's respective scanline via counter variables . For example: Y-values between 0 to 7 belong to Scanline 0, scanlineCount[0] = 0 Y-values between 8 to 15 belong to Scanline 1, scanlineCount[1] = 0 etc. I could reset the values per scanline for every frame drawn. While going down the sprite list, add 1 to the scanline's respective counter if a sprite gets drawn in that scanline. If it equals 8, don't draw that sprite and go to the sprite with the next lowest priority. SLOWDOWN The last thing I need to do is emulate slowdown. My initial idea was that if I'm drawing 64 sprites per frame and there's still more sprites that need to be drawn, I could pause the rendering by 16ms or so. However, in the NES games I've played, sometimes there's slowdown if there's not any sprite flickering going on whereas the game moves beautifully even if there is some sprite flickering. Perhaps give a value to each object that uses sprites on the screen (like the priority values above), and if the combined values of all objects w/ sprites surpass a threshold, introduce the sprite flickering? IN CONCLUSION... Does everything I wrote actually sound legitimate and could work, or is it a pipe dream? What improvements can you all possibly think with this game programming theory of mine?

  Read the article

• PHP/Java bridge problem

  - by Jack

  I am using tomcat 6 on windows. Here is the code I am testing. import java.io.ByteArrayOutputStream; import java.io.Closeable; import java.io.StringReader; import javax.script.Invocable; import javax.script.ScriptEngine; import javax.script.ScriptEngineManager; /** * Create and run THREAD_COUNT PHP threads, concurrently accessing a * shared resource. * * Create 5 script engines, passing each a shared resource allocated * from Java. Each script engine has to implement Runnable. * * Java accesses the Runnable script engine using * scriptEngine.getInterface() and calls thread.start() to invoke each * PHP Runnable implementations concurrently. */ class PhpThreads { public static final String runnable = new String("<?php\n" + "function run() {\n" + " $out = java_context()->getAttribute('sharedResource', 100);\n" + " $nr = (string)java_context()->getAttribute('nr', 100);\n" + " echo \"started thread: $nr\n\";\n" + " for($i=0; $i<100; $i++) {\n" + " $out->write(ord($nr));\n" + " java('java.lang.Thread')->sleep(1);\n" + " }\n" + "}\n" + "?>\n"); static final int THREAD_COUNT = 5; public static void main(String[] args) throws Exception { ScriptEngineManager manager = new ScriptEngineManager(); Thread threads[] = new Thread[THREAD_COUNT]; ScriptEngine engines[] = new ScriptEngine[THREAD_COUNT]; ByteArrayOutputStream sharedResource = new ByteArrayOutputStream(); StringReader runnableReader = new StringReader(runnable); // create THREAD_COUNT PHP threads for (int i=0; i<THREAD_COUNT; i++) { engines[i] = manager.getEngineByName("php-invocable"); if (engines[i] == null) throw new NullPointerException ("php script engine not found"); engines[i].put("nr", new Integer(i+1)); engines[i].put("sharedResource", sharedResource); engines[i].eval(runnableReader); runnableReader.reset(); // cast the whole script to Runnable; note also getInterface(specificClosure, type) Runnable r = (Runnable) ((Invocable)engines[i]).getInterface(Runnable.class); threads[i] = new Thread(r); } // run the THREAD_COUNT PHP threads for (int i=0; i<THREAD_COUNT; i++) { threads[i].start(); } // wait for the THREAD_COUNT PHP threads to finish for (int i=0; i<THREAD_COUNT; i++) { threads[i].join(); ((Closeable)engines[i]).close(); } // print the output generated by the THREAD_COUNT concurrent threads String result = sharedResource.toString(); System.out.println(result); // Check result Object res=manager.getEngineByName("php").eval( "<?php " + "exit((int)('10011002100310041005'!=" + "@system(\"echo -n "+result+"|sed 's/./&\\\n/g'|sort|uniq -c|tr -d ' \\\n'\")));" + "?>"); System.exit(((Number)res).intValue()); } } I have added all the libraries. When I run the file I get the following error - run: Exception in thread "main" javax.script.ScriptException: java.io.IOException: Cannot run program "php-cgi": CreateProcess error=2, The system cannot find the file specified at php.java.script.InvocablePhpScriptEngine.eval(InvocablePhpScriptEngine.java:209) at php.java.script.SimplePhpScriptEngine.eval(SimplePhpScriptEngine.java:178) at javax.script.AbstractScriptEngine.eval(AbstractScriptEngine.java:232) at PhpThreads.main(NewClass.java:53) Caused by: java.io.IOException: Cannot run program "php-cgi": CreateProcess error=2, The system cannot find the file specified at java.lang.ProcessBuilder.start(ProcessBuilder.java:459) at java.lang.Runtime.exec(Runtime.java:593) at php.java.bridge.Util$Process.start(Util.java:1064) at php.java.bridge.Util$ProcessWithErrorHandler.start(Util.java:1166) at php.java.bridge.Util$ProcessWithErrorHandler.start(Util.java:1217) at php.java.script.CGIRunner.doRun(CGIRunner.java:126) at php.java.script.HttpProxy.doRun(HttpProxy.java:63) at php.java.script.CGIRunner.run(CGIRunner.java:111) at php.java.bridge.ThreadPool$Delegate.run(ThreadPool.java:60) Caused by: java.io.IOException: CreateProcess error=2, The system cannot find the file specified at java.lang.ProcessImpl.create(Native Method) at java.lang.ProcessImpl.<init>(ProcessImpl.java:81) at java.lang.ProcessImpl.start(ProcessImpl.java:30) at java.lang.ProcessBuilder.start(ProcessBuilder.java:452) ... 8 more What am I missing?

  Read the article

• OpenGL antialiasing not working

  - by user146780

  I'v been trying to anti alias with OGL. I found a code chunk that is supposed to do this but I see no antialiasing. I also reset my settings in Nvidia Control Panel but no luck. Does this code in fact antialias the cube? GLboolean polySmooth = GL_TRUE; static void init(void) { glCullFace (GL_BACK); glEnable (GL_CULL_FACE); glBlendFunc (GL_SRC_ALPHA_SATURATE, GL_ONE); glClearColor (0.0, 0.0, 0.0, 0.0); } #define NFACE 6 #define NVERT 8 void drawCube(GLdouble x0, GLdouble x1, GLdouble y0, GLdouble y1, GLdouble z0, GLdouble z1) { static GLfloat v[8][3]; static GLfloat c[8][4] = { {0.0, 0.0, 0.0, 1.0}, {1.0, 0.0, 0.0, 1.0}, {0.0, 1.0, 0.0, 1.0}, {1.0, 1.0, 0.0, 1.0}, {0.0, 0.0, 1.0, 1.0}, {1.0, 0.0, 1.0, 1.0}, {0.0, 1.0, 1.0, 1.0}, {1.0, 1.0, 1.0, 1.0} }; /* indices of front, top, left, bottom, right, back faces */ static GLubyte indices[NFACE][4] = { {4, 5, 6, 7}, {2, 3, 7, 6}, {0, 4, 7, 3}, {0, 1, 5, 4}, {1, 5, 6, 2}, {0, 3, 2, 1} }; v[0][0] = v[3][0] = v[4][0] = v[7][0] = x0; v[1][0] = v[2][0] = v[5][0] = v[6][0] = x1; v[0][1] = v[1][1] = v[4][1] = v[5][1] = y0; v[2][1] = v[3][1] = v[6][1] = v[7][1] = y1; v[0][2] = v[1][2] = v[2][2] = v[3][2] = z0; v[4][2] = v[5][2] = v[6][2] = v[7][2] = z1; #ifdef GL_VERSION_1_1 glEnableClientState (GL_VERTEX_ARRAY); glEnableClientState (GL_COLOR_ARRAY); glVertexPointer (3, GL_FLOAT, 0, v); glColorPointer (4, GL_FLOAT, 0, c); glDrawElements(GL_QUADS, NFACE*4, GL_UNSIGNED_BYTE, indices); glDisableClientState (GL_VERTEX_ARRAY); glDisableClientState (GL_COLOR_ARRAY); #else printf ("If this is GL Version 1.0, "); printf ("vertex arrays are not supported.\n"); exit(1); #endif } /* Note: polygons must be drawn from front to back * for proper blending. */ void display(void) { if (polySmooth) { glClear (GL_COLOR_BUFFER_BIT); glEnable (GL_BLEND); glEnable (GL_POLYGON_SMOOTH); glDisable (GL_DEPTH_TEST); } else { glClear (GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glDisable (GL_BLEND); glDisable (GL_POLYGON_SMOOTH); glEnable (GL_DEPTH_TEST); } glPushMatrix (); glTranslatef (0.0, 0.0, -8.0); glRotatef (30.0, 1.0, 0.0, 0.0); glRotatef (60.0, 0.0, 1.0, 0.0); drawCube(-0.5, 0.5, -0.5, 0.5, -0.5, 0.5); glPopMatrix (); glFlush (); } void reshape(int w, int h) { glViewport(0, 0, (GLsizei) w, (GLsizei) h); glMatrixMode(GL_PROJECTION); glLoadIdentity(); gluPerspective(30.0, (GLfloat) w/(GLfloat) h, 1.0, 20.0); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); } void keyboard(unsigned char key, int x, int y) { switch (key) { case `t': case `T': polySmooth = !polySmooth; glutPostRedisplay(); break; case 27: exit(0); /* Escape key */ break; default: break; } } int main(int argc, char** argv) { glutInit(&argc, argv); glutInitDisplayMode (GLUT_SINGLE | GLUT_RGB | GLUT_ALPHA | GLUT_DEPTH); glutInitWindowSize(200, 200); glutCreateWindow(argv[0]); init (); glutReshapeFunc (reshape); glutKeyboardFunc (keyboard); glutDisplayFunc (display); glutMainLoop(); return 0; } Thanks

  Read the article

• if I put accept all 0.0.0.0/0 means this server is totally open for any ip ?

  - by davyzhang

  ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 is this means allow all ip from all port? but I still can not visit the server except I go through the allowed ip address and if I put this line in any line, did I make this server totally open for any connection? the full iptable list is below Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 116.211.25.89 0.0.0.0/0 ACCEPT all -- 222.215.136.8 0.0.0.0/0 ACCEPT all -- 125.82.87.21 0.0.0.0/0 ACCEPT all -- 127.0.0.1 127.0.0.1 ACCEPT tcp -- 61.172.251.109 0.0.0.0/0 tcp spt:8080 ACCEPT tcp -- 61.172.254.123 0.0.0.0/0 tcp spt:8080 ACCEPT tcp -- 61.129.44.191 0.0.0.0/0 ACCEPT tcp -- 61.129.44.128 0.0.0.0/0 ACCEPT tcp -- 61.172.251.109 0.0.0.0/0 tcp spt:8080 ACCEPT tcp -- 61.172.254.123 0.0.0.0/0 tcp spt:8080 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 0 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:53 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:53 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:123 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:123 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:20 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:21 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:80 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:88 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:8000 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:8080 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:8888 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:873 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:6969 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:6900 ACCEPT tcp -- 61.172.241.98 0.0.0.0/0 ACCEPT tcp -- 61.172.247.98 0.0.0.0/0 ACCEPT tcp -- 61.172.247.100 0.0.0.0/0 ACCEPT tcp -- 61.152.122.33 0.0.0.0/0 ACCEPT tcp -- 61.152.110.130 0.0.0.0/0 ACCEPT tcp -- 210.51.28.220 0.0.0.0/0 ACCEPT tcp -- 210.51.28.120 0.0.0.0/0 ACCEPT tcp -- 61.172.241.120 0.0.0.0/0 ACCEPT tcp -- 211.147.0.85 0.0.0.0/0 ACCEPT tcp -- 211.147.0.114 0.0.0.0/0 ACCEPT tcp -- 222.73.61.249 0.0.0.0/0 ACCEPT tcp -- 222.73.61.250 0.0.0.0/0 ACCEPT tcp -- 222.73.61.251 0.0.0.0/0 ACCEPT tcp -- 210.51.31.11 0.0.0.0/0 tcp dpt:38422 ACCEPT tcp -- 210.51.31.12 0.0.0.0/0 tcp dpt:38422 ACCEPT tcp -- 61.172.254.123 0.0.0.0/0 tcp spt:8080 ACCEPT tcp -- 61.172.251.109 0.0.0.0/0 tcp spt:8080 ACCEPT tcp -- 61.172.247.85 0.0.0.0/0 ACCEPT tcp -- 222.73.12.248 0.0.0.0/0 ACCEPT tcp -- 61.172.254.184 0.0.0.0/0 ACCEPT tcp -- 61.172.254.78 0.0.0.0/0 ACCEPT tcp -- 61.172.254.243 0.0.0.0/0 ACCEPT tcp -- 61.152.97.115 0.0.0.0/0 ACCEPT tcp -- 221.231.128.206 0.0.0.0/0 ACCEPT tcp -- 221.231.130.199 0.0.0.0/0 ACCEPT udp -- 172.0.0.0/8 0.0.0.0/0 udp dpt:161 ACCEPT udp -- 10.0.0.0/8 0.0.0.0/0 udp dpt:161 ACCEPT udp -- 192.168.0.0/16 0.0.0.0/0 udp dpt:161 ACCEPT udp -- 61.172.252.58 0.0.0.0/0 udp dpt:161 ACCEPT udp -- 61.183.13.201 0.0.0.0/0 udp dpt:161 ACCEPT udp -- 222.73.2.11 0.0.0.0/0 udp dpt:161 ACCEPT udp -- 221.208.157.158 0.0.0.0/0 udp dpt:161 ACCEPT udp -- 218.30.74.250 0.0.0.0/0 udp dpt:161 ACCEPT udp -- 202.102.54.234 0.0.0.0/0 udp dpt:161 ACCEPT udp -- 125.64.2.115 0.0.0.0/0 udp dpt:161 ACCEPT udp -- 222.73.23.23 0.0.0.0/0 udp dpt:161 ACCEPT udp -- 210.51.33.97 0.0.0.0/0 udp dpt:161 ACCEPT udp -- 210.51.33.98 0.0.0.0/0 udp dpt:161 ACCEPT udp -- 222.73.11.112 0.0.0.0/0 udp dpt:161 ACCEPT udp -- 222.73.11.111 0.0.0.0/0 udp dpt:161 ACCEPT udp -- 222.73.11.89 0.0.0.0/0 udp spt:38514 DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:38423 REJECT tcp -- 0.0.0.0/0 0.0.0.0/0 reject-with tcp-reset DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT) target prot opt source destination DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- 0.0.0.0/0 222.73.11.89 udp dpt:38514

  Read the article

• javamail smtp issue

  - by lepricon123

  I am using spring to send mail and for some reason its stripping the from email address. I ma sending the complete address form the sender to the mails server. Following is the log 10.105.21.299, taq02, 5/4/2010, 14:50:32, SMTPSVC1, taser10, 10.100.20.106, 2250, 11, 199, 250, 0, EHLO, -, taq02, 10.105.21.299, taq02, 5/4/2010, 14:50:32, SMTPSVC1, taser10, 10.100.20.106, 0, 14, 34, 250, 0, MAIL, -, FROM:<{}>, 10.105.21.299, taq02, 5/4/2010, 14:50:32, SMTPSVC1, taser10, 10.100.20.106, 0, 32, 35, 250, 0, RCPT, -, TO:<[email protected]>, 10.105.21.299, taq02, 5/4/2010, 14:50:32, SMTPSVC1, taser10, 10.100.20.106, 0, 681, 130, 250, 0, DATA, -, <27317520.11273009832239.JavaMail.root@taq02>, 10.105.21.299, taq02, 5/4/2010, 14:50:32, SMTPSVC1, taser10, 10.100.20.106, 0, 4, 78, 240, 2265, QUIT, -, taq02, 148.142.126.203, OutboundConnectionResponse, 5/4/2010, 14:50:33, SMTPSVC1, TASER10, -, 1110, 0, 95, 0, 0, -, -, 220 *******************************************************************************************, 148.142.126.203, OutboundConnectionCommand, 5/4/2010, 14:50:33, SMTPSVC1, TASER10, -, 1110, 0, 4, 0, 0, EHLO, -, TASER10.ccdomain.com, 148.142.126.203, OutboundConnectionResponse, 5/4/2010, 14:50:33, SMTPSVC1, TASER10, -, 1188, 0, 65, 0, 0, -, -, 250-acsinet11.emailserver.com Hello [4.79.35.186], pleased to meet you, 148.142.126.203, OutboundConnectionCommand, 5/4/2010, 14:50:33, SMTPSVC1, TASER10, -, 1188, 0, 4, 0, 0, MAIL, -, FROM:<{}@TASER10> SIZE=945, 148.142.126.203, OutboundConnectionResponse, 5/4/2010, 14:50:33, SMTPSVC1, TASER10, -, 1328, 0, 34, 0, 0, -, -, 250 2.1.0 <{}@TASER10>... Sender ok, 148.142.126.203, OutboundConnectionCommand, 5/4/2010, 14:50:33, SMTPSVC1, TASER10, -, 1328, 0, 4, 0, 0, RCPT, -, TO:<[email protected]>, 148.142.126.203, OutboundConnectionResponse, 5/4/2010, 14:50:33, SMTPSVC1, TASER10, -, 1375, 0, 87, 0, 0, -, -, 553 5.1.8 <[email protected]>... Domain of sender address {}@TASER10 does not exist, 148.142.126.203, OutboundConnectionCommand, 5/4/2010, 14:50:33, SMTPSVC1, TASER10, -, 1375, 0, 4, 0, 0, RSET, -, -, 148.142.126.203, OutboundConnectionResponse, 5/4/2010, 14:50:33, SMTPSVC1, TASER10, -, 1407, 0, 21, 0, 0, -, -, 250 2.0.0 Reset state, 148.142.126.203, OutboundConnectionCommand, 5/4/2010, 14:50:33, SMTPSVC1, TASER10, -, 1422, 0, 4, 0, 0, RSET, -, -, The mail server is taser10 and the sender is on taq02 erver as follows http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd" <bean id="smtpAuthenticator" class="SmtpAuthenticator"> <constructor-arg value="[email protected]" /> <constructor-arg value="password" /> </bean> <bean id="mailSession" class="javax.mail.Session" factory-method="getInstance"> <constructor-arg> <props> <prop key="mail.smtp.auth">false</prop> <prop key="mail.smtp.socketFactory.port">465</prop> <prop key="mail.smtp.socketFactory.class"> javax.net.ssl.SSLSocketFactory</prop> <prop key="mail.smtp.socketFactory.fallback"> false </prop> </props> </constructor-arg> <constructor-arg ref="smtpAuthenticator" /> </bean> <bean id="mailSender" class="org.springframework.mail.javamail.JavaMailSenderImpl"> <property name="host" value="10.100.20.106" /> </bean> <bean id="mailMessage" class="org.springframework.mail.SimpleMailMessage"> <property name="from" value="[email protected]" /> <property name="subject" value="Subject AB"/> </bean>

  Read the article

• Getting an Access 2007 table (.accdb extension) in ArcMap programmatically

  - by Adrian

  I have recently found a script from ArcScripts on how to get an Access table in ArcGIS programmatically and it works well. But this is for Access 2003 (.mdb extension) and earlier. The code is posted below, and I want to know how to modify it for using Access 2007 (.accdb extension) and later databases. Attribute VB_Name = "Access_connect" Sub Open_Access_Connect() 'V. Guissard Jan. 2007 On Error GoTo EH Dim data_source As String Dim pTable As ITable Dim TableName As String Dim pFeatWorkspace As IFeatureWorkspace Dim pMap As IMap Dim mxDoc As IMxDocument Dim pPropset As IPropertySet Dim pStTab As IStandaloneTable Dim pStTabColl As IStandaloneTableCollection Dim pWorkspace As IWorkspace Dim pWorkspaceFact As IWorkspaceFactory Set pPropset = New PropertySet ' Get MDB file name data_source = GetFolder("mdb") ' Connect to the MDB database pPropset.SetProperty "CONNECTSTRING", "Provider=Microsoft.Jet.OLEDB.4.0;" _ & "Data source=" & data_source & ";User ID=Admin;Password=" Set pWorkspaceFact = New OLEDBWorkspaceFactory Set pWorkspace = pWorkspaceFact.Open(pPropset, 0) Set pFeatWorkspace = pWorkspace ' Get table name TableName = SelectDataSet(pFeatWorkspace, "Table") ' Open the table Set pTable = pFeatWorkspace.OpenTable(TableName) 'Create Table collection and add the table to ArcMap Set mxDoc = ThisDocument Set pMap = mxDoc.FocusMap Set pStTab = New StandaloneTable Set pStTab.Table = pTable Set pStTabColl = pMap pStTabColl.AddStandaloneTable pStTab ' Update ArcMap Source TOC mxDoc.UpdateContents Exit Sub EH: MsgBox "Access connect: " & Err.Number & " " & Err.Description End Sub Public Function GetFolder(Optional aFilter As String) As String ' Open a GUI to let the user select a Folder path name (by default) or : ' Set aFilter = "shp" to get a shapefile name ' Set aFilter = "mdb" to get an MS Access file name ' Return the Folder Path or phath & file name As String ' V. Guissard Jan. 2007 Dim pGxDialog As IGxDialog Dim pFilterCol As IGxObjectFilterCollection Dim pCurrentFilter As IGxObjectFilter Dim pEnumGx As IEnumGxObject Select Case aFilter Case "shp" Set pCurrentFilter = New GxFilterShapefiles aTitle = "Select Shapefile" Case "mdb" Set pCurrentFilter = New GxFilterContainers aTitle = "Select MS Access database" Case Else Set pCurrentFilter = New GxFilterBasicTypes aTitle = "Select Folder" End Select Set pGxDialog = New GxDialog Set pFilterCol = pGxDialog With pFilterCol .AddFilter pCurrentFilter, True End With With pGxDialog .Title = aTitle .ButtonCaption = "Select" End With If Not pGxDialog.DoModalOpen(0, pEnumGx) Then Smp = MsgBox("No selection : Exit", vbCritical) End 'Exit Function 'Exit if user press Cancel End If GetFolder = pEnumGx.Next.FullName End Function Public Function SelectDataSet(pWorkspace As IWorkspace, Optional theDataType As String) As String ' Open a GUI to let the user select a DataSet into a Workspace ' (Table or Request into an MS Access Database or a Geodatabase File) ' Set pWorkspace to the DataSet IWorkspace ' Set theDataType = "Table" to select a Table name of the DataSet ' Return the selected Table or Request Table name As String ' V. Guissard Jan. 2007 Dim aDataset As Boolean Dim boolOK As Boolean Dim DataSetList As New Collection Dim datasetType As Integer Dim n As Integer Dim pDataSetName As IDatasetName Dim pListDlg As IListDialog Dim pEnumDatasetName As IEnumDatasetName ' Set the Dataset Type Select Case theDataType Case "Table" datasetType = 10 Case Else Answ = MsgBox("Need a Dataset Type : Exit", vbCritical, "SelectDataset") End End Select ' Get the Dataset Names included in the workspace Set pEnumDatasetName = pWorkspace.DatasetNames(datasetType) ' Create the Dataset Names List Dialog aDataset = False Set pListDlg = New ListDialog pEnumDatasetName.Reset Set pDataSetName = pEnumDatasetName.Next Do While Not pDataSetName Is Nothing pListDlg.AddString pDataSetName.name DataSetList.Add (pDataSetName.name) Set pDataSetName = pEnumDatasetName.Next aDataset = True Loop ' Open a GUI for the user to select a dataset If aDataset Then boolOK = pListDlg.DoModal("Select a " & theDataType, 0, Application.hwnd) n = pListDlg.choice If (n <> -1) Then SelectDataSet = DataSetList(n + 1) Else Sup = MsgBox("No DataSet selected : EXIT", vbCritical, "SelectDataset") End End If End If End Function Here is the link to the ArcScript: http://arcscripts.esri.com/Data/AS14882.bas PS I know this code is written in VBA and I don't know if a modified version is in VB.NET or whatever else language. Thanks, Adrian

  Read the article

• Can't obtain reference to EKReminder array retrieved from fetchRemindersMatchingPredicate

  - by Scionwest

  When I create an NSPredicate via EKEventStore predicateForRemindersInCalendars; and pass it to EKEventStore fetchRemindersMatchingPredicate:completion:^ I can loop through the reminders array provided by the completion code block, but when I try to store a reference to the reminders array, or create a copy of the array into a local variable or instance variable, both array's remain empty. The reminders array is never copied to them. This is the method I am using, in the method, I create a predicate, pass it to the event store and then loop through all of the reminders logging their title via NSLog. I can see the reminder titles during runtime thanks to NSLog, but the local arrayOfReminders object is empty. I also try to add each reminder into an instance variable of NSMutableArray, but once I leave the completion code block, the instance variable remains empty. Am I missing something here? Can someone please tell me why I can't grab a reference to all of the reminders for use through-out the app? I am not having any issues at all accessing and storing EKEvents, but for some reason I can't do it with EKReminders. - (void)findAllReminders { NSPredicate *predicate = [self.eventStore predicateForRemindersInCalendars:nil]; __block NSArray *arrayOfReminders = [[NSArray alloc] init]; [self.eventStore fetchRemindersMatchingPredicate:predicate completion:^(NSArray *reminders) { arrayOfReminders = [reminders copy]; //Does not work. for (EKReminder *reminder in reminders) { [self.remindersForTheDay addObject:reminder]; NSLog(@"%@", reminder.title); } }]; //Always = 0; if ([self.remindersForTheDay count]) { NSLog(@"Instance Variable has reminders!"); } //Always = 0; if ([arrayOfReminders count]) { NSLog(@"Local Variable has reminders!"); } } The eventStore getter is where I perform my instantiation and get access to the event store. - (EKEventStore *)eventStore { if (!_eventStore) { _eventStore = [[EKEventStore alloc] init]; //respondsToSelector indicates iOS 6 support. if ([_eventStore respondsToSelector:@selector(requestAccessToEntityType:completion:)]) { //Request access to user calendar [_eventStore requestAccessToEntityType:EKEntityTypeEvent completion:^(BOOL granted, NSError *error) { if (granted) { NSLog(@"iOS 6+ Access to EventStore calendar granted."); } else { NSLog(@"Access to EventStore calendar denied."); } }]; //Request access to user Reminders [_eventStore requestAccessToEntityType:EKEntityTypeReminder completion:^(BOOL granted, NSError *error) { if (granted) { NSLog(@"iOS 6+ Access to EventStore Reminders granted."); } else { NSLog(@"Access to EventStore Reminders denied."); } }]; } else { //iOS 5.x and lower support if Selector is not supported NSLog(@"iOS 5.x < Access to EventStore calendar granted."); } for (EKCalendar *cal in self.calendars) { NSLog(@"Calendar found: %@", cal.title); } [_eventStore reset]; } return _eventStore; } Lastly, just to show that I am initializing my remindersForTheDay instance variable using lazy instantiation. - (NSMutableArray *)remindersForTheDay { if (!_remindersForTheDay) _remindersForTheDay = [[NSMutableArray alloc] init]; return _remindersForTheDay; } I've read through the Apple documentation and it doesn't provide any explanation that I can find to answer this. I read through the Blocks Programming docs and it states that you can access local and instance variables without issues from within a block, but for some reason, the above code does not work. Any help would be greatly appreciated, I've scoured Google for answers but have yet to get this figured out. Thanks everyone! Johnathon.

  Read the article

• How to get IMediaControl.Run() to start a file playing with no delay

  - by MusiGenesis

  I am attempting to use DirectShow to play two AVI files consecutively (one after the other) so that there is no interruption in the audio or video when the player transitions from one file to the next. I have two custom controls on my form. Each one is pre-loaded with an AVI file, and before playback begins I set up all the DirectShow interfaces, set the video windows and resize them, call IMediaControl.Run(), then IMediaControl.Pause(), then IMediaSeeking.SetPositions to reset to frame 0, on both controls. On the form, you can see that both files are paused at their initial frames. I then call IMediaControl.Run() on the first control, and wait for it to complete before calling Run() on the second control. Initially, I hooked into the first video's EC_COMPLETE notification message, and used this to start the second. Thinking that this event might be slow to arrive (turns out it is, but for a weird reason), I tried two other approaches: Check the first video's current position inside a timer that goes off every second or so (using IMediaPosition.get_CurrentPosition). When the current position is within a second of the video's stop time (known in advance from IMediaPosition.get_StopTime), I go into a tight while loop and wait for the current position to equal the stop time, and then call Run() on the second video. Same as the first, except I replace the while loop with a call to timeSetEvent from winmm.dll, with a delay set so that it fires right when the first file is supposed to end. I use the callback to Run() the second file. Either of these two methods substantially cuts down the delay between the end of the first file and the beginning of the second, indicating that the EC_COMPLETE message doesn't arrive immediately after the file is complete (I also tried hooking the EC_SEGMENT_COMPLETE message, which is supposed to be used for looping within a file, but apparently nobody supports this - it never occurs on my machine, at least). Doing all of the above has cut the transition delay from as much as a second, down to a barely perceptible glitch; about a third of the time the files transition with no interruption at all, which suggests there's no fundamental reason I can't get this to work all the time. The slight delay is still unacceptable, unfortunately. I assume (and I could easily be wrong) that the remaining delay is due to a slight variable delay between the call to IMediaControl.Run() and when the video actually starts playing. Does anybody know anything I can do to eliminate this little lag? It would also help to be told this is fundamentally impossible for whatever reason, which wouldn't surprise me. I've never encountered a video player in Windows that doesn't have this problem, so it may not be doable. More info: the AVI files I'm playing are completely uncompressed (video and audio are uncompressed), so I don't think the lag is due to DirectShow's having to uncompress the video ahead of play start, although it may still buffer ahead as matter of course (and this may be the source of the problem). I would have though that starting play, pausing and then rewinding to the beginning would fix this. Also, the way I'm handling the transition is to actually have the second control underneath the first; when the first completes playing, I start the second and then call BringToFront on it, creating the appearance of a single video transitioning between the two originals. I don't think the glitch is due to this, because it works perfectly some of the time, and even if this were problematic, it wouldn't explain the matching audio glitch. Even more: I just tried starting the second video 30-50 milliseconds "early" and that seemed to eliminate even more of the gap, so I'm guessing that the lag in Run() is about that long. It appears to be variable, though, so this is still not where I need it to be.

  Read the article

• How do I make Linux recognize a new SATA /dev/sda drive I hot swapped in without rebooting?

  - by Philip Durbin

  Hot swapping out a failed SATA /dev/sda drive worked fine, but when I went to swap in a new drive, it wasn't recognized: [root@fs-2 ~]# tail -18 /var/log/messages May 5 16:54:35 fs-2 kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen May 5 16:54:35 fs-2 kernel: ata1: SError: { PHYRdyChg CommWake } May 5 16:54:40 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:45 fs-2 kernel: ata1: device not ready (errno=-16), forcing hardreset May 5 16:54:45 fs-2 kernel: ata1: soft resetting link May 5 16:54:50 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:55 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:54:55 fs-2 kernel: ata1: soft resetting link May 5 16:55:00 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:05 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:05 fs-2 kernel: ata1: soft resetting link May 5 16:55:10 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:40 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:40 fs-2 kernel: ata1: limiting SATA link speed to 1.5 Gbps May 5 16:55:40 fs-2 kernel: ata1: soft resetting link May 5 16:55:45 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:45 fs-2 kernel: ata1: reset failed, giving up May 5 16:55:45 fs-2 kernel: ata1: EH complete I tried a couple things to make the server find the new /dev/sda, such as rescan-scsi-bus.sh but they didn't work: [root@fs-2 ~]# echo "---" > /sys/class/scsi_host/host0/scan -bash: echo: write error: Invalid argument [root@fs-2 ~]# [root@fs-2 ~]# /root/rescan-scsi-bus.sh -l [snip] 0 new device(s) found. 0 device(s) removed. [root@fs-2 ~]# [root@fs-2 ~]# ls /dev/sda ls: /dev/sda: No such file or directory I ended up rebooting the server. /dev/sda was recognized, I fixed the software RAID, and everything is fine now. But for next time, how can I make Linux recognize a new SATA drive I have hot swapped in without rebooting? The operating system in question is RHEL5.3: [root@fs-2 ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.3 (Tikanga) The hard drive is a Seagate Barracuda ES.2 SATA 3.0-Gb/s 500-GB, model ST3500320NS. Here is the lscpi output: [root@fs-2 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) Update: In perhaps a dozen cases, we've been forced to reboot servers because hot swap hasn't "just worked." Thanks for the answers to look more into the SATA controller. I've included the lspci output for the problematic system above (hostname: fs-2). I could still use some help understanding what exactly isn't supported hardware-wise in terms of hot swap for that system. Please let me know what other output besides lspci might be useful. The good news is that hot swap "just worked" today on one of our servers (hostname: www-1), which is very rare for us. Here is the lspci output: [root@www-1 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 09:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS (rev 04)

  Read the article

• MySQL 5.1.49 freezing every two days

  - by maximus

  Hi all, our mysql system is "freezing" every two days. By "freezing" i mean the following: it doesn't respond to ping we can't login with SSH we don't get any answer from MySQL there is no entry in the error logs! neither from linux neither from MySQL. we have already changed to a completely new hardware, we have the same problem, so it's definitely not a hardware problem. we do not have any other software installed except a firewall (iptables rule) we can restart the server from another server using rsyslog (www.rsyslog.com)(software reset) Could someone help me, by giving me some pointers what could i do to figure out the problem? I have included every detail about our settings. Thank you in advance for your help. Max. Our system parameters and settings: System-Memory: 12GB Processor: Intel 7-920 Quadcore Operating system: Debian 5 (lenny) 64bit MySQL 5.1.49 Databases: (a) a small phpbb forum (b) a 6GB database 3 tables with about 15 million rows my.cnf # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = our-ip-address # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 256K thread_cache_size = 32 max_connections = 300 table_cache = 2048 #thread_concurrency = 4 # Used for InnoDB tables recommended to 50%-80% available memory innodb_buffer_pool_size = 6G # 20MB sometimes larger innodb_additional_mem_pool_size = 20M # 8M-16M is good for most situations innodb_log_buffer_size = 8M # Disable XA support because we do not use it innodb-support-xa = 0 # 1 is default wich is 100% secure but 2 offers better performance innodb_flush_log_at_trx_commit = 1 innodb_flush_method = O_DIRECT #innodb_thread_concurency = 8 # Recommended 64M - 512M depending on server size innodb_log_file_size = 512M # One file per table innodb_file_per_table # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M #query_cache_type = 1 #query_cache_min_res_unit= 2K #join_buffer_size = 1M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 2 log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. #server-id = 1 log_bin = /var/log/mysql/mysql-bin.log # WARNING: Using expire_logs_days without bin_log crashes the server! See README.Debian! expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # * InnoDB plugin # As of MySQL 5.1.38, the InnoDB plugin from Oracle is included in the MySQL source code. # It has many improvements and better performances than the built-in InnoDB storage engine. # Please read http://www.innodb.com/products/innodb_plugin/ for more information. # Uncommenting the two following lines to use the InnoDB plugin. ignore_builtin_innodb plugin-load=innodb=ha_innodb_plugin.so # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # !includedir /etc/mysql/conf.d/ UPDATE After installing sysstat and configuring it to collect data after every minute i have the following datas. I used sar to generate the following output: The log-file is too big so coudn't enter it here but uploaded to box.net. The link is http://www.box.net/shared/xc6rh7qqob SECOND UPDATE We started a ping command in the background, and that solved the problem. Now the server does work since more then a week. We still don't know what's the problem.

  Read the article

• Proper network configuration for a KVM guest to be on the same networks at the host

  - by Steve Madsen

  I am running a Debian Linux server on Lenny. Within it, I am running another Lenny instance using KVM. Both servers are externally available, with public IPs, as well as a second interface with private IPs for the LAN. Everything works fine, except the VM sees all network traffic as originating from the host server. I suspect this might have something to do with the iptables-based firewall I'm running on the host. What I'd like to figure out is: how to I properly configure the host's networking such that all of these requirements are met? Both host and VMs have 2 network interfaces (public and private). Both host and VMs can be independently firewalled. Ideally, VM traffic does not have to traverse the host firewall. VMs see real remote IP addresses, not the host's. Currently, the host's network interfaces are configured as bridges. eth0 and eth1 do not have IP addresses assigned to them, but br0 and br1 do. /etc/network/interfaces on the host: # The primary network interface auto br1 iface br1 inet static address 24.123.138.34 netmask 255.255.255.248 network 24.123.138.32 broadcast 24.123.138.39 gateway 24.123.138.33 bridge_ports eth1 bridge_stp off auto br1:0 iface br1:0 inet static address 24.123.138.36 netmask 255.255.255.248 network 24.123.138.32 broadcast 24.123.138.39 # Internal network auto br0 iface br0 inet static address 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 bridge_ports eth0 bridge_stp off This is the libvirt/qemu configuration file for the VM: <domain type='kvm'> <name>apps</name> <uuid>636b6620-0949-bc88-3197-37153b88772e</uuid> <memory>393216</memory> <currentMemory>393216</currentMemory> <vcpu>1</vcpu> <os> <type arch='i686' machine='pc'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='cdrom'> <target dev='hdc' bus='ide'/> <readonly/> </disk> <disk type='file' device='disk'> <source file='/raid/kvm-images/apps.qcow2'/> <target dev='vda' bus='virtio'/> </disk> <interface type='bridge'> <mac address='54:52:00:27:5e:02'/> <source bridge='br0'/> <model type='virtio'/> </interface> <interface type='bridge'> <mac address='54:52:00:40:cc:7f'/> <source bridge='br1'/> <model type='virtio'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target port='0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' keymap='en-us'/> </devices> </domain> Along with the rest of my firewall rules, the firewalling script includes this command to pass packets destined for a KVM guest: # Allow bridged packets to pass (for KVM guests). iptables -A FORWARD -m physdev --physdev-is-bridged -j ACCEPT (Not applicable to this question, but a side-effect of my bridging configuration appears to be that I can't ever shut down cleanly. The kernel eventually tells me "unregister_netdevice: waiting for br1 to become free" and I have to hard reset the system. Maybe a sign I've done something dumb?)

  Read the article

• zLib on iPhone, stop at first BLOCK

  - by cedric

  I am trying to call iPhone zLib to decompress the zlib stream from our HTTP based server, but the code always stop after finishing the first zlib block. Obviously, iPhone SDK is using the standard open Zlib. My doubt is that the parameter for inflateInit2 is not appropriate here. I spent lots of time reading the zlib manual, but it isn't that helpful. Here is the details, your help is appreciated. (1) the HTTP request: NSURL *url = [NSURL URLWithString:@"http://192.168.0.98:82/WIC?query=getcontacts&PIN=12345678&compression=Y"]; (2) The data I get from server is something like this (if decompressed). The stream was compressed by C# zlib class DeflateStream: $REC_TYPE=SYS Status=OK Message=OK SetID= IsLast=Y StartIndex=0 LastIndex=6 EOR ...... $REC_TYPE=CONTACTSDISTLIST ID=2 Name=CTU+L%2EA%2E OnCallEnabled=Y OnCallMinUsers=1 OnCallEditRight= OnCallEditDLRight=D Fields= CL= OnCallStatus= EOR (3) However, I will only get the first Block. The code for decompression on iPhone (copied from a code piece from somewhere here) is as follow. The loop between Line 23~38 always break the second time execution. + (NSData *) uncompress: (NSData*) data { 1 if ([data length] == 0) return nil; 2 NSInteger length = [data length]; 3 unsigned full_length = length; 4 unsigned half_length =length/ 2; 5 NSMutableData *decompressed = [NSMutableData dataWithLength: 5*full_length + half_length]; 6 BOOL done = NO; 7 int status; 8 z_stream strm; 9 length=length-4; 10 void* bytes= malloc(length); 11 NSRange range; 12 range.location=4; 13 range.length=length; 14 [data getBytes: bytes range: range]; 15 strm.next_in = bytes; 16 strm.avail_in = length; 17 strm.total_out = 0; 18 strm.zalloc = Z_NULL; 19 strm.zfree = Z_NULL; 20 strm.data_type= Z_BINARY; 21 // if (inflateInit(&strm) != Z_OK) return nil; 22 if (inflateInit2(&strm, (-15)) != Z_OK) return nil; //It won't work if change -15 to positive numbers. 23 while (!done) 24 { 25 // Make sure we have enough room and reset the lengths. 26 if (strm.total_out >= [decompressed length]) 27 [decompressed increaseLengthBy: half_length]; 28 strm.next_out = [decompressed mutableBytes] + strm.total_out; 29 strm.avail_out = [decompressed length] - strm.total_out; 30 31 // Inflate another chunk. 32 status = inflate (&strm, Z_SYNC_FLUSH); //Z_SYNC_FLUSH-->Z_BLOCK, won't work either 33 if (status == Z_STREAM_END){ 34 35 done = YES; 36 } 37 else if (status != Z_OK) break; 38 } 39 if (inflateEnd (&strm) != Z_OK) return nil; 40 // Set real length. 41 if (done) 42 { 43 [decompressed setLength: strm.total_out]; 44 return [NSData dataWithData: decompressed]; 45 } 46 else return nil; 47 }

  Read the article

• How to use multiple instances of a usercontrol (with jquery) on the same page

  - by Julian

  Hi All, I've been working on an usercontrol with a jquery timer in it. At first I had the jquery within the usercontrol. But when I add 2 of those controls to my page the second usercontrol isn't showing it's data very well. Now I've put the jquery into the mainpage and the usercontrol only uses the id's of the jquery. Here is my usercontrol: <%@ Control Language="C#" AutoEventWireup="true" CodeFile="WebUserControl.ascx.cs" Inherits="WebUserControl" %> <style type="text/css"> #mainpanel { width: 145px; height: 123px; } </style> <div id="mainpanel"> <div> test</div> <div id="shortly" style="background-color: #FFFFFF"> </div> <button id="resetButton"> Reset </button> </div> Mainpage: <%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %> <%@ Register Src="WebUserControl.ascx" TagName="WebUserControl" TagPrefix="uc1" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title>hoi</title> <script src="Scripts/jquery-1.4.2.min.js" type="text/javascript"></script> <script src="Scripts/jquery-ui-1.8.1.custom.min.js" type="text/javascript"></script> <link href="Css/jquery-ui-1.8.1.custom.css" rel="stylesheet" type="text/css" /> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jqueryui/1.8/jquery-ui.min.js"></script> <script type="text/javascript" src="Scripts/jquery.countdown.js"></script> <script type="text/javascript"> $(document).ready(function () { $(function() { $("#mainpanel"); }); shortly = new Date(); shortly.setSeconds(shortly.getSeconds() + 5.5); $('#shortly').countdown({ until: shortly, onExpiry: liftOff, layout: '{sn}', }); $('#resetButton').click(function () { $('#mainpanel').effect("highlight", {}, 700 ); $('#shortly').effect("highlight", {}, 700 ); shortly = new Date(); shortly.setSeconds(shortly.getSeconds() + 5.5); $('#shortly').countdown('change', { until: shortly }); }); function liftOff() { // refresh the page window.location = window.location; } }); </script> </head> <body> <uc1:WebUserControl ID="WebUserControl1" runat="server" /> </body> </html> But still my usercontrols are acting weird, now my question is: "How can I make the SAME usercontrols work properly on ONE page?" Both of those use the same jquery code but the buttons etc. should only work within the usercontrol itself.

  Read the article

• Show/hide glossary page in YUI

  - by QLiu

  Hello All, I am trying to develop a toggle function like http://www.lutsr.nl/yui/toggle/ But it works a little different as them. When user enters the glossary page, he sees a full list of Alphabet with all the techical terms explaination All — A | B | C | E | G | H | M | P | Q | R | S | T | U | Z | ActiveSync® Microsoft® ActiveSync est l’ application permettant à un pocket pc d’ échanger des informations avec un ordinateur . Le Pocket PC doit utiliser Microsoft Windows Mobile™ ou Windows CE. Bluetooth® Le Bluetooth permet aux informations d’ être transmises entre les appareils électroniques qui ont le Bluetooth. Si vous utilisez le Bluetooth, vous n'avez pas besoin de connecter les périphériques à l'aide de câbles. ............................. If the user clicks B Alphabet, the rest of content will hide, except B. and B will be move to top of the section. If the user clicks All aplphabet, the whole list will be reset. What I have now, it is able to show/hide and listen to click event. Here is my source code: <a href="#A" class ="toggle" rel="A_section,fade,20"> A</a> | <a href="#B" class ="toggle" rel="B_section,fade,20"> B</a> | Script: //Load JavaScript Ready event. this.toggleLinks=YAHOO.util.Dom.getElementsByClassName("toggle"); for(var i=0; i<this.toggleLinks.length; i++) { YAHOO.util.Event.addListener(this.toggleLinks[i], "click", this.animateElements,this); } toggleElements : function(e,controlNode,refEl) { if(controlNode && refEl) { if(YAHOO.util.Dom.hasClass(refEl,"show")) { YAHOO.util.Dom.removeClass(controlNode,"selected"); YAHOO.util.Dom.removeClass(refEl,"show"); } else { YAHOO.util.Dom.addClass(controlNode,"selected"); YAHOO.util.Dom.addClass(refEl,"show"); } } // to disable control node's default behaviour return false; }, animateElements : function(e,obj) { // obj = javascript toggle object // this = link clicked YAHOO.util.Event.preventDefault(e); if(this.rel) { controlNode = this; } if(typeof(controlNode) == "string") { controlNode = YAHOO.util.Dom.get(controlNode); } // objParameters // [0] = object id // [1] = animation type (fade, slide) // [2] = animation duration (seconds) var linkClicked = this; var objParameters = controlNode.rel.split(","); var refEl = YAHOO.util.Dom.get(objParameters[0]); var objStatus = YAHOO.util.Dom.hasClass(refEl,"show"); // if true, object is shown switchClasses = function() { obj.toggleOtherElements(e,linkClicked,refEl); obj.toggleElements(e,linkClicked,refEl); } if(objParameters[1] == "fade") { if(objStatus == true) { var attributes = { opacity: {from: .999, to: 0} } var objAnim = new YAHOO.util.Anim(objParameters[0],attributes); objAnim.useSeconds = false; objAnim.duration = objParameters[2]; objAnim.onComplete.subscribe(switchClasses); objAnim.animate(); } else { YAHOO.util.Dom.setStyle(objParameters[0],"opacity",0); switchClasses(); var attributes = { opacity: {from: 0, to: .999} } var objAnim = new YAHOO.util.Anim(objParameters[0],attributes); objAnim.useSeconds = false; objAnim.duration = objParameters[2]; objAnim.animate(); } } else if (objParameters[1] == "slide") { // not implemented yet } else { // NO ANIMATION - switch classes switchClasses(); } }, toggleOtherElements : function(e,linkClicked,refEl) { // toggle selected state of other elements pointing to the same source for(var i=0; i<this.toggleLinks.length; i++) { var objParameters = this.toggleLinks[i].rel.split(","); var linkClickedParameters = linkClicked.rel.split(","); if(objParameters[0] == linkClickedParameters[0]) { if(YAHOO.util.Dom.hasClass(this.toggleLinks[i],"selected")) { YAHOO.util.Dom.removeClass(this.toggleLinks[i],"selected"); } else { YAHOO.util.Dom.addClass(this.toggleLinks[i],"selected"); } } } }

  Read the article

• How do I make Linux recognize a new SATA /dev/sda drive I hot swapped in without rebooting?

  - by Philip Durbin

  Hot swapping out a failed SATA /dev/sda drive worked fine, but when I went to swap in a new drive, it wasn't recognized: [root@fs-2 ~]# tail -18 /var/log/messages May 5 16:54:35 fs-2 kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen May 5 16:54:35 fs-2 kernel: ata1: SError: { PHYRdyChg CommWake } May 5 16:54:40 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:45 fs-2 kernel: ata1: device not ready (errno=-16), forcing hardreset May 5 16:54:45 fs-2 kernel: ata1: soft resetting link May 5 16:54:50 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:55 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:54:55 fs-2 kernel: ata1: soft resetting link May 5 16:55:00 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:05 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:05 fs-2 kernel: ata1: soft resetting link May 5 16:55:10 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:40 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:40 fs-2 kernel: ata1: limiting SATA link speed to 1.5 Gbps May 5 16:55:40 fs-2 kernel: ata1: soft resetting link May 5 16:55:45 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:45 fs-2 kernel: ata1: reset failed, giving up May 5 16:55:45 fs-2 kernel: ata1: EH complete I tried a couple things to make the server find the new /dev/sda, such as rescan-scsi-bus.sh but they didn't work: [root@fs-2 ~]# echo "---" > /sys/class/scsi_host/host0/scan -bash: echo: write error: Invalid argument [root@fs-2 ~]# [root@fs-2 ~]# /root/rescan-scsi-bus.sh -l [snip] 0 new device(s) found. 0 device(s) removed. [root@fs-2 ~]# [root@fs-2 ~]# ls /dev/sda ls: /dev/sda: No such file or directory I ended up rebooting the server. /dev/sda was recognized, I fixed the software RAID, and everything is fine now. But for next time, how can I make Linux recognize a new SATA drive I have hot swapped in without rebooting? The operating system in question is RHEL5.3: [root@fs-2 ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.3 (Tikanga) The hard drive is a Seagate Barracuda ES.2 SATA 3.0-Gb/s 500-GB, model ST3500320NS. Here is the lscpi output: [root@fs-2 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) Update: In perhaps a dozen cases, we've been forced to reboot servers because hot swap hasn't "just worked." Thanks for the answers to look more into the SATA controller. I've included the lspci output for the problematic system above (hostname: fs-2). I could still use some help understanding what exactly isn't supported hardware-wise in terms of hot swap for that system. Please let me know what other output besides lspci might be useful. The good news is that hot swap "just worked" today on one of our servers (hostname: www-1), which is very rare for us. Here is the lspci output: [root@www-1 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 09:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS (rev 04)

  Read the article

• Tomcat stops responding to JK requests

  - by Bruno Reis

  Hello. I have a nasty issue with load-balanced Tomcat servers that are hanging up. Any help would be greatly appreciated. The system I'm running Tomcat 6.0.26 on HotSpot Server 14.3-b01 (Java 1.6.0_17-b04) on three servers sitting behind another server that acts as load balancer. The load balancer runs Apache (2.2.8-1) + MOD_JK (1.2.25). All of the servers are running Ubuntu 8.04. The Tomcat's have 2 connectors configured: an AJP one, and a HTTP one. The AJP is to be used with the load balancer, while the HTTP is used by the dev team to directly connect to a chosen server (if we have a reason to do so). I have Lambda Probe 1.7b installed on the Tomcat servers to help me diagnose and fix the problem soon to be described. The problem Here's the problem: after about 1 day the application servers are up, JK Status Manager starts reporting status ERR for, say, Tomcat2. It will simply get stuck on this state, and the only fix I've found so far is to ssh the box and restart Tomcat. I must also mention that JK Status Manager takes a lot longer to refresh when there's a Tomcat server in this state. Finally, the "Busy" count of the stuck Tomcat on JK Status Manager is always high, and won't go down per se -- I must restart the Tomcat server, wait, then reset the worker on JK. Analysis Since I have 2 connectors on each Tomcat (AJP and HTTP), I still can connect to the application through the HTTP one. The application works just fine like this, very, very fast. That is perfectly normal, since I'm the only one using this server (as JK stopped delegating requests to this Tomcat). To try to better understand the problem, I've taken a thread dump from a Tomcat which is not responding anymore, and from another one that has been restarted recently (say, 1 hour before). The instance that is responding normally to JK shows most of the TP-ProcessorXXX threads in "Runnable" state, with the following stack trace: java.net.SocketInputStream.socketRead0 ( native code ) java.net.SocketInputStream.read ( SocketInputStream.java:129 ) java.io.BufferedInputStream.fill ( BufferedInputStream.java:218 ) java.io.BufferedInputStream.read1 ( BufferedInputStream.java:258 ) java.io.BufferedInputStream.read ( BufferedInputStream.java:317 ) org.apache.jk.common.ChannelSocket.read ( ChannelSocket.java:621 ) org.apache.jk.common.ChannelSocket.receive ( ChannelSocket.java:559 ) org.apache.jk.common.ChannelSocket.processConnection ( ChannelSocket.java:686 ) org.apache.jk.common.ChannelSocket$SocketConnection.runIt ( ChannelSocket.java:891 ) org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run ( ThreadPool.java:690 ) java.lang.Thread.run ( Thread.java:619 ) The instance that is stuck show most (all?) of the TP-ProcessorXXX threads in "Waiting" state. These have the following stack trace: java.lang.Object.wait ( native code ) java.lang.Object.wait ( Object.java:485 ) org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run ( ThreadPool.java:662 ) java.lang.Thread.run ( Thread.java:619 ) I don't know of the internals of Tomcat, but I would infer that the "Waiting" threads are simply threads sitting on a thread pool. So, if they are threads waiting inside of a thread pool, why wouldn't Tomcat put them to work on processing requests from JK? Solution? So, as I've stated before, the only fix I've found is to stop the Tomcat instance, stop the JK worker, wait the latter's busy count slowly go down, start Tomcat again, and enable the JK worker once again. What is causing this problem? How should I further investigate it? What can I do to solve it? Thanks in advance.

  Read the article

• Running an allocation simulation repeatedly breaks after the first run.

  - by Az

  Background I have a bunch of students, their desired projects and the supervisors for the respective projects. I'm running a battery of simulations to see which projects the students end up with, which will allow me to get some useful statistics required for feedback. So, this is essentially a Monte-Carlo simulation where I'm randomising the list of students and then iterating through it, allocating projects until I hit the end of the list. Then the process is repeated again. Note that, within a single session, after each successful allocation of a project the following take place: + the project is set to allocated and cannot be given to another student + the supervisor has a fixed quota of students he can supervise. This is decremented by 1 + Once the quota hits 0, all the projects from that supervisor become blocked and this has the same effect as a project being allocated Code def resetData(): for student in students.itervalues(): student.allocated_project = None for supervisor in supervisors.itervalues(): supervisor.quota = 0 for project in projects.itervalues(): project.allocated = False project.blocked = False The role of resetData() is to "reset" certain bits of the data. For example, when a project is successfully allocated, project.allocated for that project is flipped to True. While that's useful for a single run, for the next run I need to be deallocated. Above I'm iterating through thee three dictionaries - one each for students, projects and supervisors - where the information is stored. The next bit is the "Monte-Carlo" simulation for the allocation algorithm. sesh_id = 1 for trial in range(50): for id in randomiseStudents(1): stud_id = id student = students[id] if not student.preferences: # Ignoring the students who've not entered any preferences for rank in ranks: temp_proj = random.choice(list(student.preferences[rank])) if not (temp_proj.allocated or temp_proj.blocked): alloc_proj = student.allocated_proj_ref = temp_proj.proj_id alloc_proj_rank = student.allocated_rank = rank successActions(temp_proj) temp_alloc = Allocated(sesh_id, stud_id, alloc_proj, alloc_proj_rank) print temp_alloc # Explained break sesh_id += 1 resetData() # Refer to def resetData() above All randomiseStudents(1) does is randomise the order of students. Allocated is a class defined as such: class Allocated(object): def __init__(self, sesh_id, stud_id, alloc_proj, alloc_proj_rank): self.sesh_id = sesh_id self.stud_id = stud_id self.alloc_proj = alloc_proj self.alloc_proj_rank = alloc_proj_rank def __repr__(self): return str(self) def __str__(self): return "%s - Student: %s (Project: %s - Rank: %s)" %(self.sesh_id, self.stud_id, self.alloc_proj, self.alloc_proj_rank) Output and problem Now if I run this I get an output such as this (truncated): 1 - Student: 7720 (Project: 1100241 - Rank: 1) 1 - Student: 7832 (Project: 1100339 - Rank: 1) 1 - Student: 7743 (Project: 1100359 - Rank: 1) 1 - Student: 7820 (Project: 1100261 - Rank: 2) 1 - Student: 7829 (Project: 1100270 - Rank: 1) . . . 1 - Student: 7822 (Project: 1100280 - Rank: 1) 1 - Student: 7792 (Project: 1100141 - Rank: 7) 2 - Student: 7739 (Project: 1100267 - Rank: 1) 3 - Student: 7806 (Project: 1100272 - Rank: 1) . . . 45 - Student: 7806 (Project: 1100272 - Rank: 1) 46 - Student: 7714 (Project: 1100317 - Rank: 1) 47 - Student: 7930 (Project: 1100343 - Rank: 1) 48 - Student: 7757 (Project: 1100358 - Rank: 1) 49 - Student: 7759 (Project: 1100269 - Rank: 1) 50 - Student: 7778 (Project: 1100301 - Rank: 1) Basically, it works perfectly for the first run, but on subsequent runs leading upto the nth run, in this case 50, only a single student-project allocation pair is returned. Thus, the main issue I'm having trouble with is figuring out what is causing this anomalous behaviour especially since the first run works smoothly. Thanks in advance, Az

  Read the article

• Wordpress add_meta_box() weirdness

  - by Scott B

  The code below is working nearly flawlessly, however my value for page title on one of my pages keeps coming up empty after a few page refreshes... It sticks for awhile, then it appears to reset to empty. I'm thinking I must have a conflict in the code below, but I can't quite figure it. I'm allowing the user to set a custom page title for posts as well as pages via a custom "post/page title input field). Can anyone see an obvious issue here that might be resetting the page title to blank? // =================== // = POST OPTION BOX = // =================== add_action('admin_menu', 'my_post_options_box'); function my_post_options_box() { if ( function_exists('add_meta_box') ) { //add_meta_box( $id, $title, $callback, $page, $context, $priority ); add_meta_box('post_header', 'Custom Post Header Code (optional)', 'custom_post_images', 'post', 'normal', 'low'); add_meta_box('post_title', 'Custom Post Title', 'custom_post_title', 'post', 'normal', 'high'); add_meta_box('post_title_page', 'Custom Post Title', 'custom_post_title', 'page', 'normal', 'high'); add_meta_box('postexcerpt', __('Excerpt'), 'post_excerpt_meta_box', 'page', 'normal', 'core'); add_meta_box('categorydiv', __('Page Options'), 'post_categories_meta_box', 'page', 'side', 'core'); } } //Adds the custom images box function custom_post_images() { global $post; ?> <div class="inside"> <textarea style="height:70px; width:100%;margin-left:-5px;" name="customHeader" id="customHeader"><?php echo get_post_meta($post->ID, 'customHeader', true); ?></textarea> <p>Enter your custom html code here for the post page header/image area. Whatever you enter here will override the default post header or image listing <b>for this post only</b>. You can enter image references like so &lt;img src='wp-content/uploads/product1.jpg' /&gt;. To show default images, just leave this field empty</p> </div> <?php } //Adds the custom post title box function custom_post_title() { global $post; ?> <div class="inside"> <p><input style="height:25px;width:100%;margin-left:-10px;" type="text" name="customTitle" id="customTitle" value="<?php echo get_post_meta($post->ID, 'customTitle', true); ?>"></p> <p>Enter your custom post/page title here and it will be used for the html &lt;title&gt; for this post page and the Google link text used for this page.</p> </div> <?php } add_action('save_post', 'custom_add_save'); function custom_add_save($postID){ // called after a post or page is saved if($parent_id = wp_is_post_revision($postID)) { $postID = $parent_id; } if ($_POST['customHeader']) { update_custom_meta($postID, $_POST['customHeader'], 'customHeader'); } else { update_custom_meta($postID, '', 'customHeader'); } if ($_POST['customTitle']) { update_custom_meta($postID, $_POST['customTitle'], 'customTitle'); } else { update_custom_meta($postID, '', 'customTitle'); } } function update_custom_meta($postID, $newvalue, $field_name) { // To create new meta if(!get_post_meta($postID, $field_name)){ add_post_meta($postID, $field_name, $newvalue); }else{ // or to update existing meta update_post_meta($postID, $field_name, $newvalue); } } ?>

  Read the article

• php soapclient responds as 'null' but xml response is ok using __getLastResponse

  - by Roger S

  I'm looking for help with a php soapclient call: The call is to a remote panel and I want to pull off the log data. There are various services published via the WSDL and I am able to use several with no issues. Here's the list: array(12) { [0]=> string(77) "GetGPTimerChannelsResponse GetGPTimerChannels(GetGPTimerChannels $parameters)" [1]=> string(74) "GetGPTimerChannelResponse GetGPTimerChannel(GetGPTimerChannel $parameters)" [2]=> string(74) "SetGPTimerChannelResponse SetGPTimerChannel(SetGPTimerChannel $parameters)" [3]=> string(47) "GetSlaveResponse GetSlave(GetSlave $parameters)" [4]=> string(71) "GetLogDataInlineResponse GetLogDataInline(GetLogDataInline $parameters)" [5]=> string(71) "GetLogItemInlineResponse GetLogItemInline(GetLogItemInline $parameters)" [6]=> string(59) "GetAlarmListResponse GetAlarmList(GetAlarmList $parameters)" [7]=> string(50) "GetSyslogResponse GetSyslog(GetSyslog $parameters)" [8]=> string(47) "SetSlaveResponse SetSlave(SetSlave $parameters)" [9]=> string(53) "GetVersionResponse GetVersion(GetVersion $parameters)" [10]=> string(53) "GetTDBInfoResponse GetTDBInfo(GetTDBInfo $parameters)" [11]=> string(53) "GetLogItemResponse GetLogItem(GetLogItem $parameters)" } I am trying to use the GetLogDataInline service which requires four parameters - these I'm passing as an array and all seems OK when doing the connection (the request/response takes around 30 seconds to process). When I look at a var_dump / print_r of the result, it returns NULL, whereas when I do a call to the __getLastResponse all of the data I need to populate my local database is there. Below is the code for the soapclient call: $client = new soapclient ("http://192.168.1.126/cgi-bin/cgi.cgi?WSDL", array("trace" => 1, "exceptions" => true, "cache_wsdl" => WSDL_CACHE_NONE, "features" => SOAP_SINGLE_ELEMENT_ARRAYS )); $params = array ( "ResponseType" => "Xml", "Step" => 15, "Start" => "2012-06-14T12:00:00+01:00", "End" => "2012-06-14T23:59:45+01:00" ); $result = $client -> GetLogDataInline ($params); An extract from the var_dump / __getLastResponse is: var_dump($client) object(SoapClient)#1 (4) { ["trace"]= int(1) ["_features"]= int(1) ["_soap_version"]= int(1) ["sdl"]= resource(4) of type (Unknown) } var_dump($result) NULL __getLastResponse 15 2012-06-14T12:00:00+01:00 2012-06-14T23:59:45+01:00 External Temperature Workshop Lux Level Electricity Pulse 100wh Workshop PIR Active Boiler Flow Temp Outside Lux Workshop_Light_Override_Hours Water Consumption (Litres) Electricity kWh Consumption Water Consumption M3 Gas kWh Consumption Outside Lighting Heating Effective Setpoint Router Reset Workshop Lighting State Heating Run Hours Heating On Receptin Percent RH Reception Temp Reception RH Reception Temp 2012-06-14T12:00:00+01:00 -85.6 2.1 -1.0 Off -91.5 13.8 0.0 -1.0 0.0 0.0 -0.1 Off 21.0 Off Off 0.0 Off 53.0 22.0 53.0 22.0 2012-06-14T12:00:15+01:00 -85.4 2.1 -1.0 Off -91.8 13.8 0.0 -1.0 0.0 0.0 -0.1 Off 21.0 Off Off 0.0 Off 53.0 22.0 53.0 22.0 2012-06-14T12:00:30+01:00 -85.4 2.1 -1.0 Off -91.8 13.8 0.0 -1.0 0.0 0.0 -0.1 Off 21.0 Off Off 0.0 Off 53.0 22.0 53.0 22.0 2012-06-14T12:00:45+01:00 -85.4 2.1 -1.0 Off -91.5 13.7 0.0 -1.0 0.0 0.0 -0.1 Off 21.0 Off Off 0.0 Off 54.0 22.0 54.0 22.0 (this should be xml but doesn't appear to have copied correctly) If you've got this far, thanks for taking the time. Any help would be much appreciated.

  Read the article

• My linux server takes more than an hour to boot. Suggestions?

  - by jamieb

  I am building a CentOS 5.4 system that boots off a compact flash card using a card reader that emulates an IDE drive. It literally takes about an hour to boot. The ultra-slow part occurs when Grub is loading the kernel. Once that's done, the rest of the boot process only takes about a minute to get to a login prompt. Does anyone have any suggestions? I suspect that it may have to do with UDMA. Everything IDE-related in my BIOS seems to checkout. The read performance hdparm is telling me 1.77 MB/s. Ouch! (But even at that rate, it still shouldn't take an hour to decompress and load the kernel) [root@server ~]# hdparm -tT /dev/hdc /dev/hdc: Timing cached reads: 2444 MB in 2.00 seconds = 1222.04 MB/sec Timing buffered disk reads: 6 MB in 3.39 seconds = 1.77 MB/sec Trying to enable DMA is a no-go though: [root@server ~]# hdparm -d1 /dev/hdc /dev/hdc: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) Here's some command outputs that might help: System [root@server ~]# uname -a Linux server.localdomain 2.6.18-164.el5xen #1 SMP Thu Sep 3 04:47:32 EDT 2009 i686 i686 i386 GNU/Linux PCI info: [root@server ~]# lspci -v 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) Subsystem: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation 82945G/GZ Integrated Graphics Controller Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at fdf00000 (32-bit, non-prefetchable) [size=512K] I/O ports at ff00 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at fdf80000 (32-bit, non-prefetchable) [size=256K] Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [d0] Power Management version 2 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at fe00 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 Flags: bus master, medium devsel, latency 0, IRQ 17 I/O ports at fd00 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at fc00 [size=32] 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at fb00 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fdd00000 Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) (prog-if 80 [Master]) Subsystem: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at f800 [size=16] Capabilities: [70] Power Management version 2 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) Subsystem: Intel Corporation 82801G (ICH7 Family) SMBus Controller Flags: medium devsel, IRQ 17 I/O ports at 0500 [size=32] 01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at de00 [size=256] Memory at fdeff000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 17 I/O ports at dc00 [size=256] Memory at fdefe000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at da00 [size=256] Memory at fdefd000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 hdparm ouput: [root@server ~]# hdparm /dev/hdc /dev/hdc: multcount = 0 (off) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 8146/16/63, sectors = 8211168, start = 0 [root@server ~]# hdparm -I /dev/hdc /dev/hdc: ATA device, with non-removable media Model Number: InnoDisk Corp. - iCF4000 4GB Serial Number: 20091023AACA70000753 Firmware Revision: 081107 Standards: Supported: 5 Likely used: 6 Configuration: Logical max current cylinders 8146 8146 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 8211168 LBA user addressable sectors: 8211168 device size with M = 1024*1024: 4009 MBytes device size with M = 1000*1000: 4204 MBytes (4 GB) Capabilities: LBA, IORDY(can be disabled) Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 2 Current = 2 DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * Power Management feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * CFA feature set * Mandatory FLUSH_CACHE HW reset results: CBLID- above Vih Device num = 0 CFA power mode 1: enabled and required by some commands Maximum current = 100ma Checksum: correct

  Read the article

• Internet Explorer percent based layout issue

  - by Tom

  Heya, My goal is to make a layout that is 200% width and height, with four containers of equal height and width (100% each), using no javascript as the bear minimum (or preferably no hacks). Right now I am using HTML5, and CSS display:table. It works fine in Safari 4, Firefox 3.5, and Chrome 5. I haven't tested it yet on older versions. Nonetheless, in IE7 and IE8 this layout fails completely. (I do use the Javascript HTML5 enabling script /cc../, so it should not be the use of new HTML5 tags) Here is what I have: <!DOCTYPE html> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <meta charset="UTF-8" /> <title>IE issue with layout</title> <style type="text/css" media="all"> /* styles */ @import url("reset.css"); /* Generall CSS */ .table { display:table; } .row { display:table-row; } .cell { display:table-cell; } /* Specific CSS */ html, body { //overflow:hidden; I later intend to limit the viewport } section#body { position:absolute; width:200%; height:200%; overflow:hidden; } section#body .row { width:200%; height:50%; overflow:hidden; } section#body .row .cell { width:50%; overflow:hidden; } section#body .row .cell section { display:block; width:100%; height:100%; overflow:hidden; } section#body #stage0 section header { text-align:center; height:20%; display:block; } section#body #stage0 section footer { display:block; height:80%; } </style> </head> <body> <section id="body" class="table"> <section class="row"> <section id="stage0" class="cell"> <section> <header> <form> <input type="text" name="q" /> <input type="submit" value="Search" /> </form> </header> <footer> <table id="scrollers"> </table> </footer> </section> </section> <section id="stage1" class="cell"> <section> content </section> </section> </section> <section class="row"> <section id="stage2" class="cell"> <section> content </section> </section> <section id="stage3" class="cell"> <section> content </section> </section> </section> </section> </body> </html> You can see it live here: http://www.tombarrasso.com/ie-issue/

  Read the article

< Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >