Search Results

Search found 1797 results on 72 pages for 'bandwidth measuring'.

Page 13/72 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

  • what firefall linux distro applicance could track internet usage per device in my home?

    - by GregH
    Hello, Anyone know of a community edition/open source/free firewall/gateway software product that I could install onto an old PC to act as my firewall/gateway/proxy etc, BUT for which it has the power to track internet usage per device in my home. So: a) Mandatory - Track internet usage for devices on my home network on a per device basis (e.g. various PCs/Xbox etc) b) Mandatory - Report/graph would would give a breakdown of internet usage, per device (e.g. IP address), per day. c) Desirable - as in b) above but per hour d) Desirable - realtime graph (e.g. 5 minute measurement intervals or something) that shows current internet usage per device e) Mandatory - Handles all internal<=internet requests for all protocols (e.g. HTTP, HTTPS, xbox etc) f) Mandatory - No explicit settings in clients required - i.e. Transparent Monitoring concept (for both HTTP and non-HTTP traffic like xbox, skype etc) g) Mandatory - easy "appliance" like installation onto a dedicated low spec PC thanks in advance

    Read the article

  • Why does a wired network slow down with user increase?

    - by Ed Briscoe
    If you had a wired network, 20 PCs hooked up to a 100 Mbit/sec switch (same onboard ethernet port speed) and you were just sending some test data round. What is the technical explanation as to why 20 machines sending test data around this network to each other is slower than one to one? I mean I know a busy network means it's slower but I'm really trying to understand some more technical details. Thanks for any help

    Read the article

  • Limit bandwith on network of computers

    - by Joseph34123
    We have network in office of approximately 10 computers sometimes when someone downloads something for work (e.g. syncing email with an attachment or Dropbox), everyone slows down. I could limit each computer in office but the problem is that we have an open WiFi network, and I cannot access the computers that use it. We have one main DSL router "Netopia 3347" and another router connected to it on wire for public wifi is "Linksys WRT110". I cannot change the setup we have and don't want to. There's 2 approaches here: Set office computers download limit in each computer and then I need to find out how I can set a download limit for the wifi network such as in the router settings. It's a Linksys router and I did not see the option for this, so maybe I need new router for WiFi? Don't bother with each computer and put some "specific hardware" or another computer before router so all traffic goes trough it and I can then assign priority maximum speed for each IP address. Question is what hardware do I need?

    Read the article

  • Rate limiting an internet connection per user

    - by Alister
    I've got a friend who has a "rent-by-room" property and includes internet access as part of this. However some tenants are somewhat hogging the internet (i.e. constantly downloading). I was wondering if anyone knows of a fairly easy way of rate limiting each connection to make the system more equitable. A preferred solution would be a cheap piece of hardware or some sort of Linux "appliance". I would rather not have to get an iptables headache if this is avoidable.

    Read the article

  • Implications of using many USB web cameras

    - by Martin
    I'm looking into connecting multiple low resolution USB webcams to a single computer. What implications might this have on performance? How does, for example, four 320x240 cameras fare against a single 640x480 camera? I'm not well versed in the architecture of the USB interface, what are the performance caveats? By performance I mean how would it affect the time to read the image data from multiple cameras compared to a single one.

    Read the article

  • How can I selectively increase latency? E.g. throttle games

    - by Arcymag
    Basically, I want networked games to run poorly on a network, but I want everything else to run smoothly. I would also appreciate advice on blocking games in general. As far as I can tell, there's a few ways to completely prevent an internet game from running: Blocking entirely via DNS configuration (e.g. hosts file), or router DNS configuration Blocking entirely via a separate DNS server Blocking the application, by uninstalling or some kind of access control Blocking the application by automatically killing the process every once in a while Blocking the application by corrupting files periodically However, I would like a more subtle way to block a program. Something that either: Increases latency (would this be doable through some kind of QoS like what DD-WRT offers?) Increases latency by using a special routing configuration for specific target IPs Throttle other systems resources, such as memory, IO, or CPU Screw around with keyboard configurations when a game is launched I would like this to work on MacOSX and Windows, but Linux would be great too. FYI I don't have a kid, but I was brainstorming with some friends and parents.

    Read the article

  • Cheapest server per gigabit throughput [closed]

    - by nethgirb
    I'm looking for a set of servers for performance testing a network, and secondarily testing some applications on the servers. Their most important task is simply to pump out data: from an application like memcached or just dumped from a large file in memory into a TCP flow (i.e., disk performance doesn't matter). This should happen over one or more 1 gigabit Ethernet ports, and the machines should run Linux (ideally), or perhaps Mac OS X or some other *nix. Other than that, there are few constraints (e.g., even something ARM-based could be fine). So here's the question: What's the cheapest server per gigabit? Price and power are both considerations.

    Read the article

  • How to get higher download rate than upload rate

    - by user23950
    i'm using bandwidthplace.com to measure my internet speed. And here it is: Download Speed: 422 kbps (52.8 KB/sec transfer rate) Upload Speed: 202 kbps (25.3 KB/sec transfer rate) Can you please explain to me how did they get the 52.8 transfer rate. And how do I get to lower the upload speed in order for me to get higher download speed.

    Read the article

  • Apache Cassandra overwhelming bandwidth overhead

    - by tanyehzheng
    while testing Apache Cassandra, I inserted 1000 rows of data. I allow it to propagate to the other machine on LAN. This is a 2 machine cluster. I monitor the network connection between the two machine. The total data I expected to flow between the two servers should be around 25Mb including all column names, column values and timestamps). But the actual data sent and received between them was an whopping 362Mb!! Anybody knows why is there such an overwhelming overhead? Thank you

    Read the article

  • NTOP gives warnings on startup

    - by FR6
    I just installed ntop 1.4.4 and when I start it, it give me infinite warnings "packet truncated": ... RRD_DEBUG: umask 0066 RRD_DEBUG: DirPerms 0700 THREADMGMT: RRD: Started thread (t2992630672) for data collection THREADMGMT[t2992630672]: RRD: Data collection thread starting [p30923] INIT: Created pid file (/var/run/ntop.pid) THREADMGMT[t3086329552]: ntop RUNSTATE: INITNONROOT(3) Now running as requested user 'nobody' (99:99) Note: Reporting device initally set to 0 [eth0] (merged) THREADMGMT[t3086329552]: ntop RUNSTATE: RUN(4) THREADMGMT[t2982140816]: NPS(1): Started thread for network packet sniffing [eth0] THREADMGMT[t2982140816]: NPS(eth0): pcapDispatch thread starting [p30923] THREADMGMT[t2982140816]: NPS(eth0): pcapDispatch thread running [p30923] THREADMGMT[t3047009168]: SIH: Idle host scan thread running [p30923] THREADMGMT[t3057499024]: SFP: Fingerprint scan thread running [p30923] **WARNING** packet truncated (8814->8232) **WARNING** packet truncated (10274->8232) **WARNING** packet truncated (8814->8232) **WARNING** packet truncated (8814->8232) ... Do I need to configure something? I tried to access the web interface (http://localhost:3000) but it does not work. Note: I'm on CentOS. EDIT: Not sure if it helps but there is my "ifconfig": eth0 Link encap:Ethernet HWaddr 00:16:76:BC:7E:77 inet addr:192.168.0.221 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::216:76ff:febc:7e77/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15496640 errors:0 dropped:0 overruns:0 frame:0 TX packets:19256813 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:836230629 (797.4 MiB) TX bytes:608496148 (580.3 MiB) Memory:dffe0000-e0000000

    Read the article

  • iis7 bandwith throttling for downloads via iis media services?

    - by MikeJ
    I am looking after a sever that is managing the downloads of software updates released by the company where I work. The throttle in IIS7 seems to limit the total rate and not the rate each individual download gets. I was thnking on installing media services, adding .zip as a type and then throttling the individual connection rate based on what I read. Is this how this sort of thing is done with IIS7?

    Read the article

  • NIC bonding with two uplinks

    - by Karolis T.
    Is bonding the preferred way of implementing ISP redundancy? In the texts I've seen, bond device has a netmask, gateway of it's own. How can this be obtained if there are two different gateways from two uplinks, which one to choose? Do I need any special routing rules to go with it or does simply configuring separate interfaces (using Debian, /etc/network/interfaces), i.e eth1, eth2 for their corresponding uplinks and bonding them to bond0 handle routing automatically? If I want to NAT client machines, do they use bond device's IP as a gateway? Does the bond0 device is the device that goes into iptables nat rules? Thanks

    Read the article

  • Server hard disk read speed and client download speed, is there a connection? [closed]

    - by Mywiki Witwiki
    Ok so a client's download speed is only as fast as a server's upload speed, and vice versa. Based on the answers to this post: Does upload speed depend upon download speed of the server? In other words, the data transfer rate between the two computers is only as fast as the speed of the "bottleneck". Let's pretend the two computers are in two different networks and both have 100Mbps internet connection. Ben wants a copy of a file in Mark's computer hard disk with 30Mbps read speed. Does this mean that Ben can download the file at a speed of around 30Mbps only, despite having an internet connection faster than 30Mbps?

    Read the article

  • Apache: Limit the Number of Requests/Traffic per IP?

    - by Ian Kern
    I would like to only allow one IP to use up to, say 1GB, of traffic per day, and if that limit is exceeded, all requests from that IP are then dropped until the next day. However, a more simple solution where the connection is dropped after a certain amount of requests would suffice. Is there already some sort of module that can do this? Or perhaps I can achieve this through something like iptables? Thanks

    Read the article

  • Insufficient channel capacity of 1GBit

    - by Roman S
    There is a Caching Server (Varnish): it receives data from Amazon S3 on request, saves it for some time and gives it to the client. We have encountered the problem of insufficient channel capacity of 1GBit. Peak load within 4 hours completely chokes the channel. Server performance is sufficient for now. Approximately 4.5TB of data are transmitted per day. More than 100TB are accumulated per month. The first thought that comes to mind is simply to add one more 1GBit port and sleep peacefully until 2GBit are not enough (it may happen quite quickly) or one server is not able to handle it. And then we just need to add new Caching Servers. But now we need a Load Balancer, which will send requests on one and the same URL, always on one and the same server (to avoid multiple copies of the same cached objects). Here are the questions: Does a Balancer need a band equal to sum of all bands of Caching Servers? What shall we do in case there are no ports in a Balancer? Should we add more Balancers or solve the problem by means of Round robin DNS? What are the standard approaches to such problems? Can anyone advise hosting-companies, which can solve this problem? We are interested in American and European markets.

    Read the article

  • NTOP gives warnings on startup

    - by FR6
    I just installed ntop 1.4.4 and when I start it, it give me infinite warnings "packet truncated": ... RRD_DEBUG: umask 0066 RRD_DEBUG: DirPerms 0700 THREADMGMT: RRD: Started thread (t2992630672) for data collection THREADMGMT[t2992630672]: RRD: Data collection thread starting [p30923] INIT: Created pid file (/var/run/ntop.pid) THREADMGMT[t3086329552]: ntop RUNSTATE: INITNONROOT(3) Now running as requested user 'nobody' (99:99) Note: Reporting device initally set to 0 [eth0] (merged) THREADMGMT[t3086329552]: ntop RUNSTATE: RUN(4) THREADMGMT[t2982140816]: NPS(1): Started thread for network packet sniffing [eth0] THREADMGMT[t2982140816]: NPS(eth0): pcapDispatch thread starting [p30923] THREADMGMT[t2982140816]: NPS(eth0): pcapDispatch thread running [p30923] THREADMGMT[t3047009168]: SIH: Idle host scan thread running [p30923] THREADMGMT[t3057499024]: SFP: Fingerprint scan thread running [p30923] **WARNING** packet truncated (8814->8232) **WARNING** packet truncated (10274->8232) **WARNING** packet truncated (8814->8232) **WARNING** packet truncated (8814->8232) ... Do I need to configure something? I tried to access the web interface (http://localhost:3000) but it does not work. Note: I'm on CentOS. EDIT: Not sure if it helps but there is my "ifconfig": eth0 Link encap:Ethernet HWaddr 00:16:76:BC:7E:77 inet addr:192.168.0.221 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::216:76ff:febc:7e77/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15496640 errors:0 dropped:0 overruns:0 frame:0 TX packets:19256813 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:836230629 (797.4 MiB) TX bytes:608496148 (580.3 MiB) Memory:dffe0000-e0000000

    Read the article

  • Small TCP Window on WAN between 2 Locations

    - by Brent
    Site A: Denver datacenter. 60MBPS. Site B: Chicago. 100MBPS. ICMP pings: Packets: Sent = 176, Received = 176, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 74ms, Maximum = 94ms, Average = 75ms File transfer between sites that never goes past ~7MBPS: Windows Update download at 60MBPS+: Site to site: IPSec VPN using two Cisco 5520's. CPU at 3-4% and lots of memory to spare. The latency between to two sites is very acceptable so I can't see an issue why it is performing so slow when transferring between the two sites. I have found that any type of transfer (FTP, HTTP, Windows file shares) will never go above ~7MBPS. When the WAN was first setup, I was able to get transfers at 50-60MBPS, which is what is expected due to the WAN connection at the Site A at 60MBPS. Then a few days later, I was not able to get anything going faster than ~7MBPS. Is there a upstream router between Denver and Chicago causing this? I want to take the blame away from our setup as downloads from Windows Update go blazing fast and for the first few days after the site to site VPN came up, I was transferring VM images at 50-60MBPS. Our stack: HP P2000 MSA - HP C7000 Chassis - HP Flex-10 - Cisco Gigabit switch - Cisco ASA - WAN

    Read the article

  • Why can't get more speed on iperf on windows xp

    - by SledgehammerPL
    I test my bandwith and throughput using iperf (jperf) on desktop PC with WinXP. I can't get more than 3Mbit/s outside until I change TCP Window size - about 84Kb is ok. but I can't force XP to use this value by default.. I try very many magic spells on Registry, use many TCP Optimisers - but nothing works. I will accept that that everything is ok, when I reboot the PC, run iperf and will see 18.1Mbit - like my Linux box standing very near my Windows XP Box. Is it possible?

    Read the article

  • iptables: limiting bytes downloaded per IP per day?

    - by Miles
    On a public-facing web server, I'd like to limit the total bytes downloaded per IP address per day. For example, after a visitor downloaded 100MB, any additional requests would be dropped or rejected for the next 24 hours. Is it possible to accomplish this using iptables alone? The connbytes, connlimit, hashlimit, quota, and recent options all look promising, but the man page plays its cards close to the vest (e.g., "quota - Implements network quotas by decrementing a byte counter with each packet. --quota bytes The quota in bytes."). Would like to avoid using a proxy (like Squid) if possible.

    Read the article

  • Is SATA bandwith per Port or per Controller?

    - by instanceofTom
    I always assumed that it was per Controller channel, and that If I have 4xSATA 3.0Gb/s ports on my Motherboard then I should have a potential 12.0Gb/s of bandwith. However, after doing some searching I found conflicting information suggesting that if I had 4xSATA drives connected to my MB and were using them simultaneously each drive would get only 3.0Gb/s /4 = 768 Mb/s max bandwith. So I wanted to clear up my understanding. Side question: Are there other hdd/ssd bandwith bottlenecks to be aware of? (Links to already answered questions are more than welcome)

    Read the article

  • Remote file copy util (like rsync) but that will take account of data already copied (in this sessio

    - by Rory McCann
    Let's say I have a directory with 2 files, both are identical and quite large (e.g. 2GB ea.) I want to rsync that directory to a remote host. As I understand it (and I could be wrong), rsync calculates checksums of files. Surely if it sees 2 files with the same checksum it can just copy the first file, then do a local copy on the remote host for the 2nd file? That would make it faster, no? On a similar note, doesn't rsync hash all the remote files before copying? If it saw a different file with the same hash as a file that was to transfered, it could do a local copy on the remote host. Does rsync support this sort of thing? Is there some way to turn it on? Is there a tool similar to rsync that will do this sort of 'hash based' local copies?

    Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >