Search Results

Search found 1565 results on 63 pages for 'can bus'.

Page 13/63 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• Connect ps/2->usb keyboard to linux?

  - by Daniel

  I have a lovely ancient ergonomic keyboard (no name SK - 6000) connected via a DIN-ps/2 adapter to a ps/2-usb adapter to my docking station. After Grub it stops working. It takes either suspending and waking up or replugging it while Linux is running to get it to work. No extra kernel modules get loaded for this. When it works and I restart without power off, it will work immediately. Even when it does not work, it is visible (lsusb device number varies but output is identical whether working or not): $ lsusb -v -s 001:006 Bus 001 Device 006: ID 0a81:0205 Chesen Electronics Corp. PS/2 Keyboard+Mouse Adapter Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0a81 Chesen Electronics Corp. idProduct 0x0205 PS/2 Keyboard+Mouse Adapter bcdDevice 0.10 iManufacturer 1 CHESEN iProduct 2 PS2 to USB Converter iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 59 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 2 PS2 to USB Converter bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 64 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 148 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) $ ll -R /sys/bus/hid/drivers/ /sys/bus/hid/drivers/: total 0 drwxr-xr-x 2 root root 0 Jul 8 2012 generic-usb/ /sys/bus/hid/drivers/generic-usb: total 0 lrwxrwxrwx 1 root root 0 Jul 7 23:33 0003:046D:C03D.0003 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/0003:046D:C03D.0003/ lrwxrwxrwx 1 root root 0 Jul 7 23:33 0003:0A81:0205.0001 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/ lrwxrwxrwx 1 root root 0 Jul 7 23:33 0003:0A81:0205.0002 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/0003:0A81:0205.0002/ --w------- 1 root root 4096 Jul 7 23:32 bind lrwxrwxrwx 1 root root 0 Jul 7 23:33 module -> ../../../../module/usbhid/ --w------- 1 root root 4096 Jul 7 23:32 new_id --w------- 1 root root 4096 Jul 8 2012 uevent --w------- 1 root root 4096 Jul 7 23:32 unbind When replugging, dmesg shows this (which except for the 1st line and different input numbers already came at boot time): [ 1583.295385] usb 1-1.2.1: new low-speed USB device number 6 using ehci_hcd [ 1583.446514] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input17 [ 1583.446817] generic-usb 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-1.2.1/input0 [ 1583.454764] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/input/input18 [ 1583.455534] generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-1.2.1/input1 [ 1583.455578] usbcore: registered new interface driver usbhid [ 1583.455584] usbhid: USB HID core driver So I tried $ sudo udevadm test /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0 run_command: calling: test adm_test: version 175 This program is for debugging only, it does not run any program, specified by a RUN key. It may show incorrect results, because some values may be different, or not available at a simulation run. parse_file: reading '/lib/udev/rules.d/40-crda.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-fuse.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/40-usb-media-players.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-usb_modeswitch.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/42-qemu-usb.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/69-cd-sensors.rules' as rules file add_rule: IMPORT found builtin 'usb_id', replacing /lib/udev/rules.d/69-cd-sensors.rules:76 ... parse_file: reading '/lib/udev/rules.d/77-mm-usb-device-blacklist.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/85-usbmuxd.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/95-upower-hid.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-wup.rules' as rules file parse_file: reading '/lib/udev/rules.d/97-bluetooth-hid2hci.rules' as rules file udev_rules_new: rules use 271500 bytes tokens (22625 * 12 bytes), 44331 bytes buffer udev_rules_new: temporary index used 76320 bytes (3816 * 20 bytes) udev_device_new_from_syspath: device 0x7f78a5e4d2d0 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0' udev_device_new_from_syspath: device 0x7f78a5e5f820 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0' udev_device_read_db: device 0x7f78a5e5f820 filled with db file data udev_device_new_from_syspath: device 0x7f78a5e60270 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001' udev_device_new_from_syspath: device 0x7f78a5e609c0 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0' udev_device_new_from_syspath: device 0x7f78a5e61160 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1' udev_device_new_from_syspath: device 0x7f78a5e61960 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2' udev_device_new_from_syspath: device 0x7f78a5e62150 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1' udev_device_new_from_syspath: device 0x7f78a5e62940 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1' udev_device_new_from_syspath: device 0x7f78a5e630f0 has devpath '/devices/pci0000:00/0000:00:1a.0' udev_device_new_from_syspath: device 0x7f78a5e638a0 has devpath '/devices/pci0000:00' udev_event_execute_rules: no node name set, will use kernel supplied name 'hidraw0' udev_node_add: creating device node '/dev/hidraw0', devnum=251:0, mode=0600, uid=0, gid=0 udev_node_mknod: preserve file '/dev/hidraw0', because it has correct dev_t udev_node_mknod: preserve permissions /dev/hidraw0, 020600, uid=0, gid=0 node_symlink: preserve already existing symlink '/dev/char/251:0' to '../hidraw0' udev_device_update_db: created empty file '/run/udev/data/c251:0' for '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0' ACTION=add DEVNAME=/dev/hidraw0 DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0 MAJOR=251 MINOR=0 SUBSYSTEM=hidraw UDEV_LOG=6 USEC_INITIALIZED=969079051 The later lines sound like it's already there. And none of these awakes the keyboard: $ sudo udevadm trigger --verbose --sysname-match=usb* /sys/devices/pci0000:00/0000:00:1a.0/usb1 /sys/devices/pci0000:00/0000:00:1a.0/usbmon/usbmon1 /sys/devices/pci0000:00/0000:00:1d.0/usb2 /sys/devices/pci0000:00/0000:00:1d.0/usbmon/usbmon2 /sys/devices/virtual/usbmon/usbmon0 $ sudo udevadm trigger --verbose --sysname-match=hidraw0 /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0 $ sudo udevadm trigger I also tried this to no avail: # echo -n 0003:0A81:0205.0001 > /sys/bus/hid/drivers/generic-usb/bind ksh: echo: write to 1 failed [No such device] # echo -n 0003:0A81:0205.0001 > /sys/bus/hid/drivers/generic-usb/unbind # echo -n 0003:0A81:0205.0001 > /sys/bus/hid/drivers/generic-usb/bind # echo usb1 >/sys/bus/usb/drivers/usb/unbind # echo usb1 >/sys/bus/usb/drivers/usb/bind What else should I try to get the same result as replugging or suspending, by just issuing a command?

  Read the article

• Python + QT + Gstreamer

  - by Ptterb

  Hi everyone, I'm working with PyQt and trying to get video from a webcam to play within a QT widget. I've found tutorials for C and Qt, and for python and gtk, but NOTHING for this combo of pyQt and gstreamer. Anybody get this working? This plays the video fine, but in a separate window: self.gcam = gst.parse_launch('v4l2src device=/dev/video0 ! autovideosink') self.gcam.set_state(gst.STATE_PLAYING) what I need is to get the overlay working so it's displayed within a widget on my GUI. Thanks, Gurus of the internet! ok, so I've gotten a lot farther, but still in need of some help. I'm actually writing this for Maemo, but the following code works fine on my linux laptop: class Vid: def __init__(self, windowId): self.player = gst.Pipeline("player") self.source = gst.element_factory_make("v4l2src", "vsource") self.sink = gst.element_factory_make("autovideosink", "outsink") self.source.set_property("device", "/dev/video0") self.scaler = gst.element_factory_make("videoscale", "vscale") self.window_id = None self.windowId = windowId self.player.add(self.source, self.scaler, self.sink) gst.element_link_many(self.source,self.scaler, self.sink) bus = self.player.get_bus() bus.add_signal_watch() bus.enable_sync_message_emission() bus.connect("message", self.on_message) bus.connect("sync-message::element", self.on_sync_message) def on_message(self, bus, message): t = message.type if t == gst.MESSAGE_EOS: self.player.set_state(gst.STATE_NULL) elif t == gst.MESSAGE_ERROR: err, debug = message.parse_error() print "Error: %s" % err, debug self.player.set_state(gst.STATE_NULL) def on_sync_message(self, bus, message): if message.structure is None: return message_name = message.structure.get_name() if message_name == "prepare-xwindow-id": win_id = self.windowId assert win_id imagesink = message.src imagesink.set_property("force-aspect-ratio", True) imagesink.set_xwindow_id(win_id) def startPrev(self): self.player.set_state(gst.STATE_PLAYING) print "should be playing" vidStream = Vid(wId) vidStream.startPrev() where wId is the window id of the widget im trying to get to display the output in. When I run this on the N900, the screen goes black and blinks. Any ideas? I'm dying here!

  Read the article

• Cannot run a VM with more than three network interfaces with KVM

  - by Bostonvaulter

  I'm running KVM on top of Ubuntu 10.10 Server I can create VM's (Virtual Machine) and network interfaces fine but I cannot seem to add more than three network interfaces. As soon as I have a VM with four network interfaces it gets stuck on startup at the starting SeaBIOS page with this message: Starting SeaBIOS (version pre-0.6.1-20100702_143500-palmer) So far I've verified this with two VM's, a Ubuntu 10.10 desktop and a Vyatta router. The specific network hardware I assign to the VM's doesn't seem to matter. I'm trying to have one bridged interface and three private networks using Vyatta to route between them. Does anyone know why I can't run a VM with more than three network interfaces? Edit: Additionally the KVM thread responsible for the specific VM hangs using ~100% CPU (i.e. one core). Here's the command for the process that is hanging: /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 512 -smp 1,sockets=1,cores=1,threads=1 -name vyatta -uuid 6dff7c94-6810-423e-5fea-fec10da0e9b7 -nodefaults -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/vyatta.monitor,server,nowait -mon chardev=monitor,mode=readline -rtc base=utc -boot c -drive file=/home/rams/virtual-machines/vyatta.img,if=none,id=drive-ide0-0-0,boot=on,format=raw -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -device rtl8139,vlan=0,id=net0,mac=00:54:00:be:cc:4b,bus=pci.0,addr=0x3 -net tap,fd=97,vlan=0,name=hostnet0 -device rtl8139,vlan=1,id=net1,mac=52:54:00:da:59:ed,bus=pci.0,addr=0x5 -net tap,fd=98,vlan=1,name=hostnet1 -device rtl8139,vlan=2,id=net2,mac=52:54:00:ce:22:b6,bus=pci.0,addr=0x6 -net tap,fd=99,vlan=2,name=hostnet2 -device rtl8139,vlan=3,id=net3,mac=52:54:00:1e:bc:46,bus=pci.0,addr=0x7 -net tap,fd=101,vlan=3,name=hostnet3 -chardev pty,id=serial0 -device isa-serial,chardev=serial0 -usb -vnc 127.0.0.1:0 -k en-us -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 Edit: I've also found an error in dmesg that might be related (it also shows up when running virtd in verbose mode): 14:47:24.399: warning : qemudParsePCIDeviceStrs:1422 : Unexpected exit status '1', qemu probably failed I've also tried disabling app armor but that doesn't seem to make a difference.

  Read the article

• Video memory buswidth vs video memory Bandwidth

  - by Mixxiphoid

  My current video card (9600GT) is dying and I'm searching for a new video card. Between acquiring my current one and now, I got a lot more knowledge about hardware and I want to use that to pick my new card. So I decided to not just buy some popular card blindly, but to search for a card able to handle my hardware requirements. I searched the specs at the NVidia site for the GT640 and was confused by the memory section and some questions raised. My current card's memory bus width is 256bit and has 1GB of memory. I checked Google about the importance of bus width. And all the links basically said the same 'The higher the number the more potential simultaneously traffic can be transferred'. This was already clear to me, yet there are currently a lot of new cards which are considered better than my current one with a lower bus width. To go in more detail about my question I copied the memory info from the NVidia site: GT 640 GT640 GDDR5 Memory Specs: Memory Clock 1.8 Gbps 5.0 Gbps Standard Memory Config 2048 MB 1024 MB Memory Interface DDR3 GDDR5 Memory Interface Width 128-bit 64-bit Memory Bandwidth (GB/sec) 28.5 40.0 What puzzled me is that the Memory Bandwidth seems to me the most important part, yet the lower bus width has the higher 'performance'. Is this due to the fact the memory interface is GDDR5 and is therefore able to have a higher memory clock speed (5Gbps)? If I am to buy a new video card, should I check the bus width? Memory clock? Bandwith? Amount of memory? My current card ahs 1GB memory, so I was searching for a 2GB memory card, but now I'm not so sure any more whether that is really 'better'. My main question: To me it seems that memory performance is made up by the combination of bus width and frequency. Is this true? If yes, why are there so many sites telling me I need to get a card with a high bus width? If no, then what IS important when it goes about memory performance on a video card. NOTE: The memory bandwidth is (almost) never displayed on vendor sites. How can I determine which card is better without knowing the bandwith?

  Read the article

• usb_modeswitch not switching

  - by deniz

  After I upgraded from kernel 2.6.18 to 3.5.3 modeswitch started not to work for me. Although lsusb shows my usb modem, usb_modeswitch does not switch it. My system information is like below. I ran lsusb, dmesg, usb-devices and usb_modeswitch their output is like below. usb_modeswitch instead of switching my modem it says "No devices in default mode found. Nothing to do. Bye.". Can you offer a solution? Kernel: Linux 3.5.3 usb_modeswitch: 1.2.3-1 usb_modeswitch-data: 20120120-1 usbutils: 006-1 libusb: 1.0.8-0.1 root@localhost$ lsusb Bus 002 Device 029: ID 12d1:1446 Huawei Technologies Co., Ltd. root@localhost$ dmesg [70112.477080] usb 2-1.4: new high-speed USB device number 30 using ehci_hcd [70112.567757] scsi49 : usb-storage 2-1.4:1.0 [70112.567842] scsi50 : usb-storage 2-1.4:1.1 [70113.571433] scsi 49:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [70113.572304] scsi 50:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2 [70113.574169] sr0: scsi-1 drive [70113.574223] sr 49:0:0:0: Attached scsi CD-ROM sr0 [70113.574250] sr 49:0:0:0: Attached scsi generic sg1 type 5 [70113.574350] sd 50:0:0:0: Attached scsi generic sg2 type 0 [70113.577173] sd 50:0:0:0: [sdb] Attached SCSI removable disk root@localhost$ usb-devices T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 30 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=1446 Rev=00.00 S: Manufacturer=Huawei Technologies S: Product=HUAWEI Mobile C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage root@localhost$ cat /etc/usb_modeswitch.d/12d1\:1446 # Huawei, newer modems TargetVendor= 0x12d1 TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" MessageContent="55534243123456780000000000000011062000000100000000000000000000" root@localhost$ usb_modeswitch -c /etc/usb_modeswitch.d/12d1:1446 -v 12d1 -p 1446 -W * usb_modeswitch: handle USB devices with multiple modes * Version 1.2.3 (C) Josua Dietze 2012 * Based on libusb0 (0.1.12 and above) ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1446 TargetVendor= 0x12d1 TargetProduct= not set TargetClass= not set TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" DetachStorageOnly=0 HuaweiMode=0 SierraMode=0 SonyMode=0 QisdaMode=0 GCTMode=0 KobilMode=0 SequansMode=0 MobileActionMode=0 CiscoMode=0 MessageEndpoint= not set MessageContent="55534243123456780000000000000011062000000100000000000000000000" NeedResponse=0 ResponseEndpoint= not set InquireDevice enabled (default) Success check disabled System integration mode disabled usb_set_debug: Setting debugging level to 15 (on) usb_os_find_busses: Skipping non bus directory devices usb_os_find_busses: Skipping non bus directory drivers usb_os_find_busses: Skipping non bus directory uevent usb_os_find_busses: Skipping non bus directory drivers_probe usb_os_find_busses: Skipping non bus directory drivers_autoprobe Looking for target devices ... No devices in target mode or class found Looking for default devices ... No devices in default mode found. Nothing to do. Bye. Thanks in advance.

  Read the article

• Wireless card power management

  - by penner

  I have noticed that when my computer in plugged in, the wireless strength increases. I'm assuming this is to do with power management. Is there a way to disable Wireless Power Management? I have found a few blog posts that show hacks to disable this but what is best practice here? Should there not be an option via the power menu that lets you toggle this? EDIT -- FILES AND LOGS AS REQUESTED /var/log/kern.log Jul 11 11:45:27 CoolBreeze kernel: [ 6.528052] postgres (1308): /proc/1308/oom_adj is deprecated, please use /proc/1308/oom_score_adj instead. Jul 11 11:45:27 CoolBreeze kernel: [ 6.532080] [fglrx] Gart USWC size:1280 M. Jul 11 11:45:27 CoolBreeze kernel: [ 6.532084] [fglrx] Gart cacheable size:508 M. Jul 11 11:45:27 CoolBreeze kernel: [ 6.532091] [fglrx] Reserved FB block: Shared offset:0, size:1000000 Jul 11 11:45:27 CoolBreeze kernel: [ 6.532094] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000 Jul 11 11:45:27 CoolBreeze kernel: [ 6.532098] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 Jul 11 11:45:38 CoolBreeze kernel: [ 17.423743] eth1: no IPv6 routers present Jul 11 11:46:37 CoolBreeze kernel: [ 75.836426] warning: `proftpd' uses 32-bit capabilities (legacy support in use) Jul 11 11:46:37 CoolBreeze kernel: [ 75.884215] init: plymouth-stop pre-start process (2922) terminated with status 1 Jul 11 11:54:25 CoolBreeze kernel: [ 543.679614] eth1: no IPv6 routers present dmesg [ 1.411959] ACPI: Power Button [PWRB] [ 1.412046] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 1.412054] ACPI: Sleep Button [SLPB] [ 1.412150] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 1.412765] ACPI: Lid Switch [LID0] [ 1.412866] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.412874] ACPI: Power Button [PWRF] [ 1.412996] ACPI: Fan [FAN0] (off) [ 1.413068] ACPI: Fan [FAN1] (off) [ 1.419493] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.419498] ACPI: Thermal Zone [TZ00] (27 C) [ 1.421913] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.421918] ACPI: Thermal Zone [TZ01] (61 C) [ 1.421971] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.421986] ACPI: Battery Slot [BAT0] (battery present) [ 1.422062] ERST: Table is not found! [ 1.422067] GHES: HEST is not enabled! [ 1.422158] isapnp: Scanning for PnP cards... [ 1.422242] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.434620] ACPI: Battery Slot [BAT0] (battery present) [ 1.736355] Freeing initrd memory: 14352k freed [ 1.777846] isapnp: No Plug & Play device found [ 1.963650] Linux agpgart interface v0.103 [ 1.967148] brd: module loaded [ 1.968866] loop: module loaded [ 1.969134] ahci 0000:00:1f.2: version 3.0 [ 1.969154] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.969226] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 1.969277] ahci: SSS flag set, parallel bus scan disabled [ 1.969320] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x23 impl SATA mode [ 1.969329] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 1.969338] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.983340] scsi0 : ahci [ 1.983515] scsi1 : ahci [ 1.983670] scsi2 : ahci [ 1.983829] scsi3 : ahci [ 1.983985] scsi4 : ahci [ 1.984145] scsi5 : ahci [ 1.984270] ata1: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005100 irq 45 [ 1.984277] ata2: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005180 irq 45 [ 1.984282] ata3: DUMMY [ 1.984285] ata4: DUMMY [ 1.984288] ata5: DUMMY [ 1.984292] ata6: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005380 irq 45 [ 1.985150] Fixed MDIO Bus: probed [ 1.985192] tun: Universal TUN/TAP device driver, 1.6 [ 1.985196] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 1.985285] PPP generic driver version 2.4.2 [ 1.985472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.985507] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.985534] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.985541] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.985626] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.985666] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.989663] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.989690] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1005800 [ 2.002183] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.002447] hub 1-0:1.0: USB hub found [ 2.002455] hub 1-0:1.0: 3 ports detected [ 2.002607] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.002633] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.002639] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 2.002737] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.002775] ehci_hcd 0000:00:1d.0: debug port 2 [ 2.006780] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 2.006806] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1005c00 [ 2.022161] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.022401] hub 2-0:1.0: USB hub found [ 2.022409] hub 2-0:1.0: 3 ports detected [ 2.022567] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.022599] uhci_hcd: USB Universal Host Controller Interface driver [ 2.022720] usbcore: registered new interface driver libusual [ 2.022813] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.035831] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.035844] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.036096] mousedev: PS/2 mouse device common for all mice [ 2.036710] rtc_cmos 00:07: RTC can wake from S4 [ 2.036881] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 2.037143] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.037503] device-mapper: uevent: version 1.0.3 [ 2.037656] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected] [ 2.037725] EISA: Probing bus 0 at eisa.0 [ 2.037729] EISA: Cannot allocate resource for mainboard [ 2.037734] Cannot allocate resource for EISA slot 1 [ 2.037738] Cannot allocate resource for EISA slot 2 [ 2.037741] Cannot allocate resource for EISA slot 3 [ 2.037745] Cannot allocate resource for EISA slot 4 [ 2.037749] Cannot allocate resource for EISA slot 5 [ 2.037753] Cannot allocate resource for EISA slot 6 [ 2.037756] Cannot allocate resource for EISA slot 7 [ 2.037760] Cannot allocate resource for EISA slot 8 [ 2.037764] EISA: Detected 0 cards. [ 2.037782] cpufreq-nforce2: No nForce2 chipset. [ 2.038264] cpuidle: using governor ladder [ 2.039015] cpuidle: using governor menu [ 2.039019] EFI Variables Facility v0.08 2004-May-17 [ 2.040061] TCP cubic registered [ 2.041438] NET: Registered protocol family 10 [ 2.043814] NET: Registered protocol family 17 [ 2.043823] Registering the dns_resolver key type [ 2.044290] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.044336] Using IPI No-Shortcut mode [ 2.045620] PM: Hibernation image not present or could not be loaded. [ 2.045644] registered taskstats version 1 [ 2.073070] Magic number: 4:976:796 [ 2.073415] rtc_cmos 00:07: setting system clock to 2012-07-11 18:45:23 UTC (1342032323) [ 2.076654] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.076658] EDD information not available. [ 2.302111] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.302587] ata1.00: ATA-9: M4-CT128M4SSD2, 000F, max UDMA/100 [ 2.302595] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.303143] ata1.00: configured for UDMA/100 [ 2.303453] scsi 0:0:0:0: Direct-Access ATA M4-CT128M4SSD2 000F PQ: 0 ANSI: 5 [ 2.303746] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.303920] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 2.304213] sd 0:0:0:0: [sda] Write Protect is off [ 2.304225] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.304471] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.306818] sda: sda1 sda2 < sda5 > [ 2.308780] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.318162] Refined TSC clocksource calibration: 1595.999 MHz. [ 2.318169] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 2.318178] Switching to clocksource tsc [ 2.450939] hub 1-1:1.0: USB hub found [ 2.451121] hub 1-1:1.0: 6 ports detected [ 2.561786] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 2.621757] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.636143] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-T633C, D800, max UDMA/100 [ 2.636152] ata2.00: applying bridge limits [ 2.649711] ata2.00: configured for UDMA/100 [ 2.653762] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-T633C D800 PQ: 0 ANSI: 5 [ 2.661486] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.661494] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.661890] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.662156] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.694649] hub 2-1:1.0: USB hub found [ 2.694840] hub 2-1:1.0: 8 ports detected [ 2.765823] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd [ 2.981454] ata6: SATA link down (SStatus 0 SControl 300) [ 2.982597] Freeing unused kernel memory: 740k freed [ 2.983523] Write protecting the kernel text: 5816k [ 2.983808] Write protecting the kernel read-only data: 2376k [ 2.983811] NX-protecting the kernel data: 4424k [ 3.014594] udevd[127]: starting version 175 [ 3.068925] sdhci: Secure Digital Host Controller Interface driver [ 3.068932] sdhci: Copyright(c) Pierre Ossman [ 3.069714] sdhci-pci 0000:09:00.0: SDHCI controller found [1180:e822] (rev 1) [ 3.069742] sdhci-pci 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.069786] sdhci-pci 0000:09:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 3.069798] sdhci-pci 0000:09:00.0: setting latency timer to 64 [ 3.069816] mmc0: no vmmc regulator found [ 3.069877] Registered led device: mmc0:: [ 3.070946] mmc0: SDHCI controller on PCI [0000:09:00.0] using DMA [ 3.071078] tg3.c:v3.121 (November 2, 2011) [ 3.071252] tg3 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.071269] tg3 0000:0b:00.0: setting latency timer to 64 [ 3.071403] firewire_ohci 0000:09:00.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 3.071417] firewire_ohci 0000:09:00.3: setting latency timer to 64 [ 3.078509] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 3.078517] EXT4-fs (sda1): write access will be enabled during recovery [ 3.110417] tg3 0000:0b:00.0: eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address b8:ac:6f:71:02:a6 [ 3.110425] tg3 0000:0b:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 3.110431] tg3 0000:0b:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 3.110436] tg3 0000:0b:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 3.125492] firewire_ohci: Added fw-ohci device 0000:09:00.3, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11 [ 3.390124] EXT4-fs (sda1): orphan cleanup on readonly fs [ 3.390135] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078710 [ 3.390232] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2363071 [ 3.390327] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078711 [ 3.390350] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078709 [ 3.390367] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078708 [ 3.390384] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078707 [ 3.390401] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078706 [ 3.390417] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078705 [ 3.390435] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078551 [ 3.390452] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078523 [ 3.390470] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078520 [ 3.390487] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7077901 [ 3.390551] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063272 [ 3.390562] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063266 [ 3.390572] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063261 [ 3.390582] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063256 [ 3.390592] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063255 [ 3.390602] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2363072 [ 3.390620] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2360050 [ 3.390698] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5250064 [ 3.390710] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2365394 [ 3.390728] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2365390 [ 3.390745] EXT4-fs (sda1): 22 orphan inodes deleted [ 3.390748] EXT4-fs (sda1): recovery complete [ 3.397636] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.624910] firewire_core: created device fw0: GUID 464fc000110e2661, S400 [ 3.927467] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.929965] udevd[400]: starting version 175 [ 3.933581] Adding 6278140k swap on /dev/sda5. Priority:-1 extents:1 across:6278140k SS [ 3.945183] lp: driver loaded but no devices found [ 3.999389] wmi: Mapper loaded [ 4.016696] ite_cir: Auto-detected model: ITE8708 CIR transceiver [ 4.016702] ite_cir: Using model: ITE8708 CIR transceiver [ 4.016706] ite_cir: TX-capable: 1 [ 4.016710] ite_cir: Sample period (ns): 8680 [ 4.016713] ite_cir: TX carrier frequency (Hz): 38000 [ 4.016716] ite_cir: TX duty cycle (%): 33 [ 4.016719] ite_cir: RX low carrier frequency (Hz): 0 [ 4.016722] ite_cir: RX high carrier frequency (Hz): 0 [ 4.025684] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 4.025691] Disabling lock debugging due to kernel taint [ 4.027410] IR NEC protocol handler initialized [ 4.030250] lib80211: common routines for IEEE802.11 drivers [ 4.030257] lib80211_crypt: registered algorithm 'NULL' [ 4.036024] IR RC5(x) protocol handler initialized [ 4.036092] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4.036188] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 4.036307] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 4.036361] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 4.039006] acpi device:03: registered as cooling_device10 [ 4.039164] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5 [ 4.039261] ACPI: Video Device [M86] (multi-head: yes rom: no post: no) [ 4.049753] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 4.050201] wl 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.050215] wl 0000:05:00.0: setting latency timer to 64 [ 4.052252] Registered IR keymap rc-rc6-mce [ 4.052432] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input6 [ 4.054614] IR RC6 protocol handler initialized [ 4.054787] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0 [ 4.054839] ite_cir: driver has been successfully loaded [ 4.057338] IR JVC protocol handler initialized [ 4.061553] IR Sony protocol handler initialized [ 4.066578] input: MCE IR Keyboard/Mouse (ite-cir) as /devices/virtual/input/input7 [ 4.066724] IR MCE Keyboard/mouse protocol handler initialized [ 4.072580] lirc_dev: IR Remote Control driver registered, major 250 [ 4.073280] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0 [ 4.073286] IR LIRC bridge handler initialized [ 4.077849] Linux video capture interface: v2.00 [ 4.079402] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:640f) [ 4.085492] EDAC MC: Ver: 2.1.0 [ 4.087138] lib80211_crypt: registered algorithm 'TKIP' [ 4.091027] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 4.091733] snd_hda_intel 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.091826] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X [ 4.091861] snd_hda_intel 0000:02:00.1: setting latency timer to 64 [ 4.093115] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50 [ 4.112448] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 4.112612] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input9 [ 4.113311] type=1400 audit(1342032325.540:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=658 comm="apparmor_parser" [ 4.114501] type=1400 audit(1342032325.540:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=658 comm="apparmor_parser" [ 4.115253] type=1400 audit(1342032325.540:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=658 comm="apparmor_parser" [ 4.121870] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10 [ 4.122096] usbcore: registered new interface driver uvcvideo [ 4.122100] USB Video Class driver (1.1.1) [ 4.128729] [fglrx] Maximum main memory to use for locked dma buffers: 5840 MBytes. [ 4.129678] [fglrx] vendor: 1002 device: 68c0 count: 1 [ 4.131991] [fglrx] ioport: bar 4, base 0x2000, size: 0x100 [ 4.132015] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.132024] pci 0000:02:00.0: setting latency timer to 64 [ 4.133712] [fglrx] Kernel PAT support is enabled [ 4.133747] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [ 4.162666] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.38 [ 4.184133] device-mapper: multipath: version 1.3.0 loaded [ 4.196660] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 4.279897] input: Dell WMI hotkeys as /devices/virtual/input/input11 [ 4.292402] Bluetooth: Core ver 2.16 [ 4.292449] NET: Registered protocol family 31 [ 4.292454] Bluetooth: HCI device and connection manager initialized [ 4.292459] Bluetooth: HCI socket layer initialized [ 4.292463] Bluetooth: L2CAP socket layer initialized [ 4.292473] Bluetooth: SCO socket layer initialized [ 4.296333] Bluetooth: RFCOMM TTY layer initialized [ 4.296342] Bluetooth: RFCOMM socket layer initialized [ 4.296345] Bluetooth: RFCOMM ver 1.11 [ 4.313586] ppdev: user-space parallel port driver [ 4.316619] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.316625] Bluetooth: BNEP filters: protocol multicast [ 4.383980] type=1400 audit(1342032325.812:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=938 comm="apparmor_parser" [ 4.385173] type=1400 audit(1342032325.812:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=938 comm="apparmor_parser" [ 4.425757] init: failsafe main process (898) killed by TERM signal [ 4.477052] type=1400 audit(1342032325.904:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1011 comm="apparmor_parser" [ 4.477592] type=1400 audit(1342032325.904:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1010 comm="apparmor_parser" [ 4.478099] type=1400 audit(1342032325.904:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1017 comm="apparmor_parser" [ 4.479233] type=1400 audit(1342032325.904:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1014 comm="apparmor_parser" [ 4.510060] vesafb: mode is 1152x864x32, linelength=4608, pages=0 [ 4.510065] vesafb: scrolling: redraw [ 4.510071] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 4.510084] mtrr: no more MTRRs available [ 4.513081] vesafb: framebuffer at 0xd0000000, mapped to 0xf9400000, using 3904k, total 3904k [ 4.515203] Console: switching to colour frame buffer device 144x54 [ 4.515278] fb0: VESA VGA frame buffer device [ 4.590743] tg3 0000:0b:00.0: irq 48 for MSI/MSI-X [ 4.702009] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.704409] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.978379] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 5.030104] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12 [ 5.045782] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 5.519573] [fglrx] ATIF platform detected with notification ID: 0x81 [ 6.391466] fglrx_pci 0000:02:00.0: irq 49 for MSI/MSI-X [ 6.393137] [fglrx] Firegl kernel thread PID: 1305 [ 6.393306] [fglrx] Firegl kernel thread PID: 1306 [ 6.393472] [fglrx] Firegl kernel thread PID: 1307 [ 6.393726] [fglrx] IRQ 49 Enabled [ 6.528052] postgres (1308): /proc/1308/oom_adj is deprecated, please use /proc/1308/oom_score_adj instead. [ 6.532080] [fglrx] Gart USWC size:1280 M. [ 6.532084] [fglrx] Gart cacheable size:508 M. [ 6.532091] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 6.532094] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000 [ 6.532098] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 [ 17.423743] eth1: no IPv6 routers present [ 75.836426] warning: `proftpd' uses 32-bit capabilities (legacy support in use) [ 75.884215] init: plymouth-stop pre-start process (2922) terminated with status 1 [ 543.679614] eth1: no IPv6 routers present lsmod Module Size Used by kvm_intel 127560 0 kvm 359456 1 kvm_intel joydev 17393 0 vesafb 13516 1 parport_pc 32114 0 bnep 17830 2 ppdev 12849 0 rfcomm 38139 0 bluetooth 158438 10 bnep,rfcomm dell_wmi 12601 0 sparse_keymap 13658 1 dell_wmi binfmt_misc 17292 1 dell_laptop 17767 0 dcdbas 14098 1 dell_laptop dm_multipath 22710 0 fglrx 2909855 143 snd_hda_codec_hdmi 31775 1 psmouse 72919 0 serio_raw 13027 0 i7core_edac 23382 0 lib80211_crypt_tkip 17275 0 edac_core 46858 1 i7core_edac uvcvideo 67203 0 snd_hda_codec_idt 60251 1 videodev 86588 1 uvcvideo ir_lirc_codec 12739 0 lirc_dev 18700 1 ir_lirc_codec ir_mce_kbd_decoder 12681 0 snd_seq_midi 13132 0 ir_sony_decoder 12462 0 ir_jvc_decoder 12459 0 snd_rawmidi 25424 1 snd_seq_midi ir_rc6_decoder 12459 0 wl 2646601 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event ir_rc5_decoder 12459 0 video 19068 0 snd_hda_intel 32765 5 snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel rc_rc6_mce 12454 0 lib80211 14040 2 lib80211_crypt_tkip,wl snd_hwdep 13276 1 snd_hda_codec ir_nec_decoder 12459 0 snd_pcm 80845 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec ite_cir 24743 0 rc_core 21263 10 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_rc6_mce,ir_nec_decoder,ite_cir snd_timer 28931 2 snd_seq,snd_pcm wmi 18744 1 dell_wmi snd 62064 20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_rawmidi,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer mac_hid 13077 0 soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm coretemp 13269 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp tg3 141369 0 firewire_ohci 40172 0 sdhci_pci 18324 0 firewire_core 56906 1 firewire_ohci sdhci 28241 1 sdhci_pci crc_itu_t 12627 1 firewire_core lshw *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 70:f1:a1:a9:54:31 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.0.117 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0900000-f0903fff *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0b:00.0 logical name: eth0 version: 10 serial: b8:ac:6f:71:02:a6 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 firmware=sb v2.19 latency=0 link=no multicast=yes port=twisted pair resources: irq:48 memory:f0d00000-f0d0ffff

  Read the article

• wifi not recognized

  - by pumper

  I had wifi and worked then some day ubuntu asked me to update some packeages and restarted the system and after that no wifi. this is my wireless_script output : ########## wireless info START ########## ##### release ##### Distributor ID: Ubuntu Description: Ubuntu 14.04 LTS Release: 14.04 Codename: trusty ##### kernel ##### Linux S510p 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux ##### lspci ##### 02:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter [168c:0036] (rev 01) Subsystem: Lenovo Device [17aa:3026] Kernel driver in use: ath9k 03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8162 Fast Ethernet [1969:1090] (rev 10) Subsystem: Lenovo Device [17aa:3807] Kernel driver in use: alx ##### lsusb ##### Bus 001 Device 006: ID 0eef:a111 D-WAV Scientific Co., Ltd Bus 001 Device 007: ID 0cf3:3004 Atheros Communications, Inc. Bus 001 Device 004: ID 174f:1488 Syntek Bus 001 Device 003: ID 03f0:5607 Hewlett-Packard Bus 001 Device 002: ID 8087:8000 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 002: ID 15d9:0a4c Trust International B.V. USB+PS/2 Optical Mouse Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ##### PCMCIA Card Info ##### ##### rfkill ##### 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: hci0: Bluetooth Soft blocked: no Hard blocked: no ##### iw reg get ##### country 00: (2402 - 2472 @ 40), (3, 20) (2457 - 2482 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS (2474 - 2494 @ 20), (3, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS ##### interfaces ##### # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback auto dsl-provider iface dsl-provider inet ppp pre-up /sbin/ifconfig wlan0 up # line maintained by pppoeconf provider dsl-provider auto wlan0 iface wlan0 inet manual ##### iwconfig ##### wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off ##### route ##### Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface ##### resolv.conf ##### ##### nm-tool ##### NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: alx State: unavailable Default: no HW Address: <MAC address removed> Capabilities: Carrier Detect: yes Wired Properties Carrier: off - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: unmanaged Default: no HW Address: <MAC address removed> Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points ##### NetworkManager.state ##### [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true ##### NetworkManager.conf ##### [main] plugins=ifupdown,keyfile,ofono dns=dnsmasq no-auto-default=<MAC address removed>, [ifupdown] managed=false ##### iwlist ##### wlan0 Scan completed : Cell 01 - Address: <MAC address removed> Channel:1 Frequency:2.412 GHz (Channel 1) Quality=55/70 Signal level=-55 dBm Encryption key:on ESSID:"mohsen" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000076c342498 Extra: Last beacon: 12ms ago IE: Unknown: 00066D6F6873656E IE: Unknown: 010882848B960C121824 IE: Unknown: 030101 IE: Unknown: 2A0104 IE: Unknown: 32043048606C ##### iwlist channel ##### wlan0 13 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz ##### lsmod ##### ath3k 13318 0 bluetooth 395423 23 bnep,ath3k,btusb,rfcomm ath9k 164164 0 ath9k_common 13551 1 ath9k ath9k_hw 453856 2 ath9k_common,ath9k ath 28698 3 ath9k_common,ath9k,ath9k_hw mac80211 626489 1 ath9k cfg80211 484040 3 ath,ath9k,mac80211 ##### modinfo ##### filename: /lib/modules/3.13.0-24-generic/kernel/drivers/bluetooth/ath3k.ko firmware: ath3k-1.fw license: GPL version: 1.0 description: Atheros AR30xx firmware driver author: Atheros Communications srcversion: 98A5245588C09E5E41690D0 alias: usb:v0489pE036d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE03Cd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE02Cd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE003d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3121d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3402d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04C5p1330d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE04Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE056d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE04Ed*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3393d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE057d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0930p0220d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0930p0219d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE005d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE004d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3362d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3008d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3006d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3005d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v04CAp3004d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3375d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p817Ad*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p311Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3008d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3004d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p0036d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v03F0p311Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE027d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0489pE03Dd*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0930p0215d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v13D3p3304d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3pE019d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3002d*dc*dsc*dp*ic*isc*ip*in* alias: usb:v0CF3p3000d*dc*dsc*dp*ic*isc*ip*in* depends: bluetooth intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko license: Dual BSD/GPL description: Support for Atheros 802.11n wireless LAN cards. author: Atheros Communications srcversion: BAF225EEB618908380B28DA alias: platform:qca955x_wmac alias: platform:ar934x_wmac alias: platform:ar933x_wmac alias: platform:ath9k alias: pci:v0000168Cd00000036sv*sd*bc*sc*i* alias: pci:v0000168Cd00000036sv0000185Fsd00003027bc*sc*i* alias: pci:v0000168Cd00000036sv00001B9Asd00002810bc*sc*i* alias: pci:v0000168Cd00000036sv0000144Fsd00007202bc*sc*i* alias: pci:v0000168Cd00000036sv00001A3Bsd00002130bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000612bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000652bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000642bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd0000302Cbc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003027bc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Ebc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Dbc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Cbc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Bbc*sc*i* alias: pci:v0000168Cd00000036sv0000144Dsd0000411Abc*sc*i* alias: pci:v0000168Cd00000036sv00001028sd0000020Ebc*sc*i* alias: pci:v0000168Cd00000036sv0000103Csd0000217Fbc*sc*i* alias: pci:v0000168Cd00000036sv0000103Csd000018E3bc*sc*i* alias: pci:v0000168Cd00000036sv000017AAsd00003026bc*sc*i* alias: pci:v0000168Cd00000036sv00001A3Bsd0000213Abc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000662bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000672bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000622bc*sc*i* alias: pci:v0000168Cd00000036sv0000185Fsd00003028bc*sc*i* alias: pci:v0000168Cd00000036sv0000105Bsd0000E069bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd0000302Bbc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003026bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003025bc*sc*i* alias: pci:v0000168Cd00000036sv00001B9Asd00002812bc*sc*i* alias: pci:v0000168Cd00000036sv00001B9Asd00002811bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00006671bc*sc*i* alias: pci:v0000168Cd00000036sv000011ADsd00000632bc*sc*i* alias: pci:v0000168Cd00000036sv0000185Fsd0000A119bc*sc*i* alias: pci:v0000168Cd00000036sv0000105Bsd0000E068bc*sc*i* alias: pci:v0000168Cd00000036sv00001A3Bsd00002176bc*sc*i* alias: pci:v0000168Cd00000036sv0000168Csd00003028bc*sc*i* alias: pci:v0000168Cd00000037sv*sd*bc*sc*i* alias: pci:v0000168Cd00000034sv*sd*bc*sc*i* alias: pci:v0000168Cd00000034sv000010CFsd00001783bc*sc*i* alias: pci:v0000168Cd00000034sv000014CDsd00000064bc*sc*i* alias: pci:v0000168Cd00000034sv000014CDsd00000063bc*sc*i* alias: pci:v0000168Cd00000034sv0000103Csd00001864bc*sc*i* alias: pci:v0000168Cd00000034sv000011ADsd00006641bc*sc*i* alias: pci:v0000168Cd00000034sv000011ADsd00006631bc*sc*i* alias: pci:v0000168Cd00000034sv00001043sd0000850Ebc*sc*i* alias: pci:v0000168Cd00000034sv00001A3Bsd00002110bc*sc*i* alias: pci:v0000168Cd00000034sv00001969sd00000091bc*sc*i* alias: pci:v0000168Cd00000034sv000017AAsd00003214bc*sc*i* alias: pci:v0000168Cd00000034sv0000168Csd00003117bc*sc*i* alias: pci:v0000168Cd00000034sv000011ADsd00006661bc*sc*i* alias: pci:v0000168Cd00000034sv00001A3Bsd00002116bc*sc*i* alias: pci:v0000168Cd00000033sv*sd*bc*sc*i* alias: pci:v0000168Cd00000032sv*sd*bc*sc*i* alias: pci:v0000168Cd00000032sv00001043sd0000850Dbc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00001C01bc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00001C00bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001F95bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001195bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001F86bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001186bc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00002001bc*sc*i* alias: pci:v0000168Cd00000032sv00001B9Asd00002000bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Fsd00007197bc*sc*i* alias: pci:v0000168Cd00000032sv0000105Bsd0000E04Fbc*sc*i* alias: pci:v0000168Cd00000032sv0000105Bsd0000E04Ebc*sc*i* alias: pci:v0000168Cd00000032sv000011ADsd00006628bc*sc*i* alias: pci:v0000168Cd00000032sv000011ADsd00006627bc*sc*i* alias: pci:v0000168Cd00000032sv00001C56sd00004001bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002100bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002C97bc*sc*i* alias: pci:v0000168Cd00000032sv000017AAsd00003219bc*sc*i* alias: pci:v0000168Cd00000032sv000017AAsd00003218bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000C708bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000C680bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000C706bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000410Fbc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000410Ebc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd0000410Dbc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd00004106bc*sc*i* alias: pci:v0000168Cd00000032sv0000144Dsd00004105bc*sc*i* alias: pci:v0000168Cd00000032sv0000185Fsd00003027bc*sc*i* alias: pci:v0000168Cd00000032sv0000185Fsd00003119bc*sc*i* alias: pci:v0000168Cd00000032sv0000168Csd00003122bc*sc*i* alias: pci:v0000168Cd00000032sv0000168Csd00003119bc*sc*i* alias: pci:v0000168Cd00000032sv0000105Bsd0000E075bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002152bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd0000126Abc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002126bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00001237bc*sc*i* alias: pci:v0000168Cd00000032sv00001A3Bsd00002086bc*sc*i* alias: pci:v0000168Cd00000030sv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Esv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Dsv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Csv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Bsv*sd*bc*sc*i* alias: pci:v0000168Cd0000002Bsv00001A3Bsd00002C37bc*sc*i* alias: pci:v0000168Cd0000002Asv000010CFsd00001536bc*sc*i* alias: pci:v0000168Cd0000002Asv000010CFsd0000147Dbc*sc*i* alias: pci:v0000168Cd0000002Asv000010CFsd0000147Cbc*sc*i* alias: pci:v0000168Cd0000002Asv0000185Fsd0000309Dbc*sc*i* alias: pci:v0000168Cd0000002Asv00001A32sd00000306bc*sc*i* alias: pci:v0000168Cd0000002Asv000011ADsd00006642bc*sc*i* alias: pci:v0000168Cd0000002Asv000011ADsd00006632bc*sc*i* alias: pci:v0000168Cd0000002Asv0000105Bsd0000E01Fbc*sc*i* alias: pci:v0000168Cd0000002Asv00001A3Bsd00001C71bc*sc*i* alias: pci:v0000168Cd0000002Asv*sd*bc*sc*i* alias: pci:v0000168Cd00000029sv*sd*bc*sc*i* alias: pci:v0000168Cd00000027sv*sd*bc*sc*i* alias: pci:v0000168Cd00000024sv*sd*bc*sc*i* alias: pci:v0000168Cd00000023sv*sd*bc*sc*i* depends: ath9k_hw,mac80211,ath9k_common,cfg80211,ath intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 parm: debug:Debugging mask (uint) parm: nohwcrypt:Disable hardware encryption (int) parm: blink:Enable LED blink on activity (int) parm: btcoex_enable:Enable wifi-BT coexistence (int) parm: bt_ant_diversity:Enable WLAN/BT RX antenna diversity (int) parm: ps_enable:Enable WLAN PowerSave (int) filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_common.ko license: Dual BSD/GPL description: Shared library for Atheros wireless 802.11n LAN cards. author: Atheros Communications srcversion: 696B00A6C59713EC0966997 depends: ath,ath9k_hw intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_hw.ko license: Dual BSD/GPL description: Support for Atheros 802.11n wireless LAN cards. author: Atheros Communications srcversion: 4809F3842A0542CD6B556D3 depends: ath intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 filename: /lib/modules/3.13.0-24-generic/kernel/drivers/net/wireless/ath/ath.ko license: Dual BSD/GPL description: Shared library for Atheros wireless LAN cards. author: Atheros Communications srcversion: 88A67C5359B02C5A710AFCF depends: cfg80211 intree: Y vermagic: 3.13.0-24-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: <MAC address removed>:D9:06:21:70:6E:8D:06:60:4D:73:0B:35:9F:C0 sig_hashalgo: sha512 ##### modules ##### lp rtc ##### blacklist ##### [/etc/modprobe.d/blacklist-ath_pci.conf] blacklist ath_pci [/etc/modprobe.d/blacklist.conf] blacklist evbug blacklist usbmouse blacklist usbkbd blacklist eepro100 blacklist de4x5 blacklist eth1394 blacklist snd_intel8x0m blacklist snd_aw2 blacklist i2c_i801 blacklist prism54 blacklist bcm43xx blacklist garmin_gps blacklist asus_acpi blacklist snd_pcsp blacklist pcspkr blacklist amd76x_edac [/etc/modprobe.d/fbdev-blacklist.conf] blacklist arkfb blacklist aty128fb blacklist atyfb blacklist radeonfb blacklist cirrusfb blacklist cyber2000fb blacklist gx1fb blacklist gxfb blacklist kyrofb blacklist matroxfb_base blacklist mb862xxfb blacklist neofb blacklist nvidiafb blacklist pm2fb blacklist pm3fb blacklist s3fb blacklist savagefb blacklist sisfb blacklist tdfxfb blacklist tridentfb blacklist viafb blacklist vt8623fb ##### udev rules ##### # PCI device 0x1969:0x1090 (alx) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address removed>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x168c:0x0036 (ath9k) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address removed>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0" ##### dmesg ##### [ 1.707662] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f03) [ 11.918852] ath: phy0: WB335 1-ANT card detected [ 11.918856] ath: phy0: Set BT/WLAN RX diversity capability [ 11.926438] ath: phy0: Enable LNA combining [ 11.928469] ath: phy0: ASPM enabled: 0x42 [ 11.928473] ath: EEPROM regdomain: 0x65 [ 11.928475] ath: EEPROM indicates we should expect a direct regpair map [ 11.928478] ath: Country alpha2 being used: 00 [ 11.928479] ath: Regpair used: 0x65 [ 14.066021] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready ########## wireless info END ############

  Read the article

• Artec TV18R Tuner not working :(

  - by Antillar Maximus

  Can somebody kindly help me setup my TV Tuner stick? Make and Model: Artec TV18R USB TV Tuner OS: Ubuntu 11.10 64bit Hardware: MSI MS1656-US (GX640 barebones): i5 580M, 2xIntel X25M SSDs, Radeon HD5850M,Realtek sound. Logs and messages: antillar@antillar-MS-1656:/usr/share/dvb/atsc$ [B][COLOR=Red]sudo lsusb[/COLOR][/B] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID ffc0:001f Bus 002 Device 005: ID 05d8:8117 Ultima Electronics Corp. [/code][code]antillar@antillar-MS-1656:/usr/share/dvb/atsc$ So, it seems that the tuner is being detected, but the light on it does not turn on? Not sure what is going on? sudo lspci [sudo] password for antillar: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Broadway PRO [Mobility Radeon HD 5800 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 04:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller 04:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller 04:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller 04:00.3 System peripheral: JMicron Technology Corp. MS Host Controller 04:00.4 System peripheral: JMicron Technology Corp. xD Host Controller 05:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) antillar@antillar-MS-1656:/usr/share/dvb/atsc$ I have been searching for a solution to this all weekend without any luck. I remember reading that ehci_hcd is the problem, but I'm not sure if disabling it is a good idea. I don't want my USB ports to go back to v1.1. Thank you!

  Read the article

• No network connectivity (not wired or wireless) - RT5390

  - by Ben Udy

  I am starting to think I simply need to accept a small loss and sell my new ASUS K73E. Because I really don't enjoy computing when I have to deal with Windough$ and this windows 7 64 bit on my new ASUS is even worse than the old machines with XP. I have written to ASUS and they simply say "We don't support Linux" and while Ralink's website says they do support Linux I can't get anyone to tell me what model Ralink card might be in my machine. Is anyone out there who might be able to give me some useful advice???? Here is the answer to command lspci nn && lsusb && lsmod && rfkill list all: di,snd_seq snd 54244 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device uvcvideo 57374 0 videodev 34361 1 uvcvideo v4l1_compat 13251 2 uvcvideo,videodev soundcore 6620 1 snd snd_page_alloc 7076 2 snd_hda_intel,snd_pcm psmouse 63677 0 serio_raw 3978 0 lp 7028 0 parport 32635 2 ppdev,lp fbcon 35102 71 tileblit 1999 1 fbcon font 7557 1 fbcon bitblit 4707 1 fbcon softcursor 1189 1 bitblit video 17375 0 output 1871 1 video vga16fb 11385 1 vgastate 8961 1 vga16fb ahci 32360 2 di,snd_seq snd 54244 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device uvcvideo 57374 0 videodev 34361 1 uvcvideo v4l1_compat 13251 2 uvcvideo,videodev soundcore 6620 1 snd snd_page_alloc 7076 2 snd_hda_intel,snd_pcm psmouse 63677 0 serio_raw 3978 0 lp 7028 0 parport 32635 2 ppdev,lp fbcon 35102 71 tileblit 1999 1 fbcon font 7557 1 fbcon bitblit 4707 1 fbcon softcursor 1189 1 bitblit video 17375 0 output 1871 1 video vga16fb 11385 1 vgastate 8961 1 vga16fb ahci 32360 2 Edit #2 lspci 00:00.0 Host bridge: Intel Corporation Device 0104 (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Device 0116 (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.5 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Device 1c49 (rev 05) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 02:00.0 Network controller: RaLink Device 5390 03:00.0 Ethernet controller: Atheros Communications Device 1083 (rev c0) lsusb Bus 002 Device 002: ID 8087:0024 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 13d3:5710 IMC Networks Bus 001 Device 002: ID 8087:0024 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Thanks for the suggestion because this gave me a model for Ralink RT5390. I have now gone to Ralink.com and downloaded (via Windows 7) the driver package (it is a bz2 file). I hope I can figure out how to install it. And FYI - I was not able to run su (not authorized?) and dmidecode didn't exist (probably needs to be downloaded BUT no internet yet in Ubuntu)

  Read the article

• How to set up dual quadro cards on RHEL 5.5?

  - by Alex J. Roberts

  I have a RHEL 5 workstation with 2 nvidia Quadro FX4500 cards, with one display attached to each card. After doing a clean install of RHEL 5.5, the second display doesnt work (it worked ok in RHEL 5.2). Neither separate X screens nor Xinerama are working. The kernel version is 2.6.18-194.el5 I've tried nvidia drivers 185.18.36 (the ones that i was using on 5.2) and the latest 260.19.36 and neither works. My xorg.conf is as follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildmeister@builder58) Fri Aug 14 18:34:43 PDT 2009 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" FontPath "unix/:7100" EndSection Section "ServerFlags" Option "Xinerama" "1" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from data in "/etc/sysconfig/keyboard" Identifier "Keyboard0" Driver "kbd" Option "XkbLayout" "us" Option "XkbModel" "pc105" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 3007WFP" HorizSync 49.3 - 98.5 VertRefresh 60.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 3007WFP" HorizSync 49.3 - 98.5 VertRefresh 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 4500" BusID "PCI:10:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 4500" BusID "PCI:129:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection And the Xorg Log: X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: Linux 2.6.18-164.11.1.el5 x86_64 Red Hat, Inc. Current Operating System: Linux blur.svsdsde 2.6.18-194.el5 #1 SMP Tue Mar 16 21:52:39 EDT 2010 x86_64 Build Date: 06 March 2010 Build ID: xorg-x11-server 1.1.1-48.76.el5 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 18 09:52:08 2011 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Layout0" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Device0" (**) |-->Screen "Screen1" (1) (**) | |-->Monitor "Monitor1" (**) | |-->Device "Device1" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "Mouse0" (**) FontPath set to: unix/:7100 (==) RgbPath set to "/usr/share/X11/rgb" (==) ModulePath set to "/usr/lib64/xorg/modules" (**) Option "Xinerama" "1" (**) Xinerama: enabled (==) Max clients allowed: 512, resource mask: 0xfffff (II) Open ACPI successful (/var/run/acpid.socket) (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.0 X.Org XInput driver : 0.6 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/lib64/xorg/modules/fonts/libbitmap.so (II) Module bitmap: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/lib64/xorg/modules/libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (++) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 10de,005e card 103c,1500 rev a3 class 05,80,00 hdr 00 (II) PCI: 00:01:0: chip 10de,0051 card 103c,1500 rev a3 class 06,01,00 hdr 80 (II) PCI: 00:01:1: chip 10de,0052 card 103c,1500 rev a2 class 0c,05,00 hdr 80 (II) PCI: 00:02:0: chip 10de,005a card 103c,1500 rev a2 class 0c,03,10 hdr 80 (II) PCI: 00:02:1: chip 10de,005b card 103c,1500 rev a3 class 0c,03,20 hdr 80 (II) PCI: 00:04:0: chip 10de,0059 card 103c,1500 rev a2 class 04,01,00 hdr 00 (II) PCI: 00:06:0: chip 10de,0053 card 103c,1500 rev f2 class 01,01,8a hdr 00 (II) PCI: 00:07:0: chip 10de,0054 card 103c,1500 rev f3 class 01,01,85 hdr 00 (II) PCI: 00:08:0: chip 10de,0055 card 103c,1500 rev f3 class 01,01,85 hdr 00 (II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01 (II) PCI: 00:0a:0: chip 10de,0057 card 103c,1500 rev a3 class 06,80,00 hdr 00 (II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01 (II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 05:05:0: chip 104c,8023 card 103c,1500 rev 00 class 0c,00,10 hdr 00 (II) PCI: 0a:00:0: chip 10de,009d card 10de,02af rev a1 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) Subtractive PCI-to-PCI bridge: (II) Bus 5: bridge is at (0:9:0), (0,5,5), BCTRL: 0x0206 (VGA_EN is cleared) (II) Bus 5 non-prefetchable memory range: [0] -1 0 0xf5000000 - 0xf50fffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 10: bridge is at (0:14:0), (0,10,10), BCTRL: 0x000a (VGA_EN is set) (II) Bus 10 I/O range: [0] -1 0 0x00003000 - 0x00003fff (0x1000) IX[B] (II) Bus 10 non-prefetchable memory range: [0] -1 0 0xf3000000 - 0xf4ffffff (0x2000000) MX[B] (II) Bus 10 prefetchable memory range: [0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B] (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:24:0), (0,0,10), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (--) PCI:*(10:0:0) nVidia Corporation Quadro FX 4500 rev 161, Mem @ 0xf3000000/24, 0xc0000000/28, 0xf4000000/24, I/O @ 0x3000/7 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [1] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [...snipped... post too long] [28] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [29] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [1] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [...snipped... post too long] [28] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [29] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [18] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [19] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [20] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [21] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [22] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [23] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [24] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [25] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [26] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [27] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [28] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [29] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [30] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [31] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [32] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [33] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [34] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [35] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Server Extension (II) NVIDIA GLX Module 185.18.36 Fri Aug 14 18:27:24 PDT 2009 (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/lib64/xorg/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 7.1.1, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/lib64/xorg/modules/fonts/libtype1.so (II) Module type1: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Type1 (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/lib64/xorg/modules/linux/libdrm.so (II) Module drm: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) LoadModule: "nvidia" (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Video Driver (II) LoadModule: "kbd" (II) Loading /usr/lib64/xorg/modules/input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/lib64/xorg/modules/input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) NVIDIA dlloader X Driver 185.18.36 Fri Aug 14 17:51:02 PDT 2009 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (II) Primary Device is: PCI 0a:00:0 (--) Chipset NVIDIA GPU found (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "wfb" (II) LoadModule: "wfb" (II) Loading /usr/lib64/xorg/modules/libwfb.so (II) Module wfb: vendor="NVIDIA Corporation" compiled for 7.1.99.2, module version = 1.0.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/lib64/xorg/modules/libramdac.so (II) Module ramdac: vendor="X.Org Foundation" compiled for 7.1.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 1.0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [18] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [19] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [20] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [21] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [22] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [23] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [24] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [25] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [26] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [27] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [28] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [29] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [30] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [31] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [32] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [33] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [34] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [35] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [21] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [22] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [23] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [24] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [25] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [26] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [27] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [28] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [29] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [30] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [31] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [32] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [33] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [34] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [35] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [36] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [37] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [38] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "TwinView" "0" (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0" (**) NVIDIA(0): Enabling RENDER acceleration (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) NVIDIA(0): enabled. (II) NVIDIA(0): NVIDIA GPU Quadro FX 4500 (G70GL) at PCI:10:0:0 (GPU-0) (--) NVIDIA(0): Memory: 524288 kBytes (--) NVIDIA(0): VideoBIOS: 05.70.02.41.01 (II) NVIDIA(0): Detected PCI Express Link width: 16X (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on Quadro FX 4500 at PCI:10:0:0: (--) NVIDIA(0): DELL 3007WFP (DFP-0) (--) NVIDIA(0): DELL 3007WFP (DFP-0): 310.0 MHz maximum pixel clock (--) NVIDIA(0): DELL 3007WFP (DFP-0): Internal Dual Link TMDS (II) NVIDIA(0): Assigned Display Device: DFP-0 (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "nvidia-auto-select+0+0" (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1600 (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config (--) NVIDIA(0): option (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling (WW) NVIDIA(0): UBB. (==) NVIDIA(0): Disabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [21] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [22] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [23] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [24] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [25] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [26] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [27] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [28] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [29] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [30] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [31] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [32] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [33] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [34] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [35] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [36] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [37] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [38] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) NVIDIA(GPU-1): NVIDIA GPU Quadro FX 4500 (G70GL) at PCI:129:0:0 (GPU-1) (--) NVIDIA(GPU-1): Memory: 524288 kBytes (--) NVIDIA(GPU-1): VideoBIOS: 05.70.02.41.01 (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X (--) NVIDIA(GPU-1): Interlaced video modes are supported on this GPU (--) NVIDIA(GPU-1): Connected display device(s) on Quadro FX 4500 at PCI:129:0:0: (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0) (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0): 310.0 MHz maximum pixel clock (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0): Internal Dual Link TMDS (II) NVIDIA(0): Initialized GPU GART. (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0" (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (==) NVIDIA(0): Disabling shared memory pixmaps (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (**) Option "dpms" (**) NVIDIA(0): DPMS enabled (II) Loading extension NV-CONTROL (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) Initializing extension GLX (WW) Disabling Composite since Xinerama is enabled (**) Option "CoreKeyboard" (**) Keyboard0: Core Keyboard (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard0: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) Keyboard0: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (**) Option "Protocol" "auto" (**) Mouse0: Device: "/dev/input/mice" (**) Mouse0: Protocol: "auto" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Option "Emulate3Buttons" "no" (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 9 (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (--) Mouse0: PnP-detected protocol: "ExplorerPS/2" (II) Mouse0: ps2EnableDataReporting: succeeded (II) Open ACPI successful (/var/run/acpid.socket) (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0" (II) Mouse0: ps2EnableDataReporting: succeeded (the snipped part can be changed if necessary) Any help at all would be appreciated. Cheers, Alex

  Read the article

• Understanding GPU clock rates

  - by trizicus

  I know how to overclock my CPU (mess with multiplier, and bus speed)... However, I've noticed that it seems a bit more complicated with GPU's. How and where do I start? I've noticed that I can adjust the GPU clock speed in my BIOS. Card I'm overclocking: http://www.nvidia.com/object/product_geforce_gt_240_us.html I found that memory bus speed is (Mem Speed * Bus width) / 8. So obviously a good way to overclock the memory bandwidth is to adjust the memory speed. Now, GPU speed is 550 Mhz. How do I find its speed as well? Do I multiply it by the bus width (128)? What is ideal GPU speed relative to memory bandwidth?

  Read the article

• startup Error for Zend Server CE

  - by Jamison

  Hello! I've got a strange startup error for Zend Server CE - it's probably easy to fix, but I don't have much experience with Zend Server! I'm running the latest OSX 10.6.6 and the latest Zend Server CE for Mac. When I run the "start" command from the command line, here is what I get: /usr/local/zend/bin/apachectl start [OK] spawn-fcgi: child spawned successfully: PID: 4206 /usr/local/zend/bin/shell_functions.rc: line 133: 4210 Bus error $WATCHDOG -i $BINARY 1>&3 2>&4 /usr/local/zend/bin/shell_functions.rc: line 133: 4211 Bus error $WATCHDOG -u $WD_UID -g $WD_GID -s $BINARY 1>&3 2>&4 Starting Zend Server GUI [Lighttpd] [FAILED] /usr/local/zend/bin/lighttpdctl.sh: line 46: 4212 Bus error $WATCHDOG -i $BINARY Starting MySQL SUCCESS! /usr/local/zend/bin/shell_functions.rc: line 133: 4304 Bus error $WATCHDOG -i $BINARY 1>&3 2>&4 /usr/local/zend/bin/shell_functions.rc: line 133: 4425 Bus error $WATCHDOG -u $WD_UID -g $WD_GID -s $BINARY 1>&3 2>&4 Starting Java bridge [FAILED] /usr/local/zend/bin/java_bridge.sh: line 39: 4426 Bus error $WATCHDOG -i $BINARY Zend Server started... The challenge is that ZEND SERVER wont open the GUI with this error, and seemingly I can click on Zend Server in the Applications folder and it opens for a second and immediately closes. I've made sure that Web Sharing is turned off to avoid conflicts, and I've run Disk Utility from my recovery disk to make sure there are no file system errors. Here is what the lines that are referenced in the errors have in terms of code: shell_functions.rc: (starting on line 132 - the error message says line 133...): launch() { if [ -z "$DEBUG" ]; then exec 3>/dev/null 4>&3 else exec 3>&1 4>&2 fi $WATCHDOG -i $BINARY 1>&3 2>&4 RET=$? if [ $RET -eq 0 ];then $ECHO_CMD "$BINARY watchdog is up and running.. ${OK_COLOR}[OK]${T_RESET}" return $RET else #$WATCHDOG -u $WD_UID -g $WD_GID -s $BINARY >> "$PREFIX/logs/watchdog_$BINARY.log" 2>&1 $WATCHDOG -u $WD_UID -g $WD_GID -s $BINARY 1>&3 2>&4 report $? "Starting" fi } _kill() { $WATCHDOG -i $BINARY > /dev/null 2>&1 if [ $? -eq 1 ];then $ECHO_CMD "$BINARY is not running" else $WATCHDOG -t $BINARY > /dev/null 2>&1 report $? "Stopping" fi } lighttpdctl.sh: (starting on line 45 - the error message says line 46...): status() { $WATCHDOG -i $BINARY } case "$1" in start) start status ;; stop) stop ;; restart) stop sleep 1 start ;; status) status ;; *) usage exit 1 esac exit $? java_bridge.sh: (starting on line 38 - the error message says line 39...): status() { $WATCHDOG -i $BINARY } Question: "Watchdog" is library in this zend BIN folder - it seems to handle error reporting? all the errors in my start command seem to deal with this Watchdog thing, but I don't know what to do about it... Thanks!

  Read the article

• 3G USB Modem Not Working in 12.04

  - by Seyed Mohammad

  When I connect my 3G USB Modem to my laptop with 12.04, nothing shows up in Network-Manager. This modem is working in 11.10 and the modem is shown in Network-Manager but not in 12.04 !! Here are the outputs of lsusb and usb-devices on two machines , one with 11.10 and the other with 12.04 : Ubuntu-11.10 : $ lsusb Bus 002 Device 009: ID 1c9e:6061 $ usb-devices T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=6061 Rev=00.00 S: Manufacturer=3G USB Modem ?? S: SerialNumber=000000000002 C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Ubuntu-12.04 : $ lsusb Bus 002 Device 003: ID 1c9e:6061 OMEGA TECHNOLOGY WL-72B 3.5G MODEM $ usb-devices T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=6061 Rev=00.00 S: Manufacturer=Qualcomm, Incorporated S: Product=USB MMC Storage S: SerialNumber=000000000002 C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) As the output of the above commands show, the device is detected as a modem in 11.10 but in 12.04 it is detected as a USB storage (the device is both a 3G Modem and a SD-card USB adapter). Any help ?!

  Read the article

• Problem running Qreator on Xubuntu-14.04

  - by Seyed Mohammad

  I installed Qreator using apt-get on Xubuntu-14.04: $ sudo apt-get install qreator But the application fails to start! When I try to run it via Terminal, the following error messages are printed and the program aborts: $ qreator ** (qreator:3859): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-Gh2FPHrMr2: Connection refused No handlers could be found for logger "qreator_lib" Traceback (most recent call last): File "/usr/bin/qreator", line 47, in <module> qreator.main() File "/usr/lib/python2.7/dist-packages/qreator/__init__.py", line 63, in main window = QreatorWindow.QreatorWindow() File "/usr/lib/python2.7/dist-packages/qreator_lib/Window.py", line 48, in __new__ new_object.finish_initializing(builder) File "/usr/lib/python2.7/dist-packages/qreator/QreatorWindow.py", line 79, in finish_initializing self.init_qr_types() File "/usr/lib/python2.7/dist-packages/qreator/QreatorWindow.py", line 135, in init_qr_types self.qr_types = [d(self.update_qr_code) for d in QRCodeType.dataformats] File "/usr/lib/python2.7/dist-packages/qreator/qrcodes/QRCodeType.py", line 71, in __init__ self.create_widget() # pylint: disable=E1101 File "/usr/lib/python2.7/dist-packages/qreator/qrcodes/QRCodeLocation.py", line 29, in create_widget self.widget = QRCodeLocationGtk(self.qr_code_update_func) File "/usr/lib/python2.7/dist-packages/qreator/qrcodes/QRCodeLocationGtk.py", line 49, in __init__ latitude, longitude = get_current_location() File "/usr/lib/python2.7/dist-packages/qreator/qrcodes/QRCodeLocationGtk.py", line 109, in get_current_location '/org/freedesktop/Geoclue/Providers/Hostip') File "/usr/lib/python2.7/dist-packages/dbus/bus.py", line 241, in get_object follow_name_owner_changes=follow_name_owner_changes) File "/usr/lib/python2.7/dist-packages/dbus/proxies.py", line 248, in __init__ self._named_service = conn.activate_name_owner(bus_name) File "/usr/lib/python2.7/dist-packages/dbus/bus.py", line 180, in activate_name_owner self.start_service_by_name(bus_name) File "/usr/lib/python2.7/dist-packages/dbus/bus.py", line 278, in start_service_by_name 'su', (bus_name, flags))) File "/usr/lib/python2.7/dist-packages/dbus/connection.py", line 651, in call_blocking message, timeout) dbus.exceptions.DBusException: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Geoclue.Providers.Hostip was not provided by any .service files How can I fix this ?

  Read the article

• Organizations &amp; Architecture UNISA Studies &ndash; Chap 7

  - by MarkPearl

  Learning Outcomes Name different device categories Discuss the functions and structure of I/.O modules Describe the principles of Programmed I/O Describe the principles of Interrupt-driven I/O Describe the principles of DMA Discuss the evolution characteristic of I/O channels Describe different types of I/O interface Explain the principles of point-to-point and multipoint configurations Discuss the way in which a FireWire serial bus functions Discuss the principles of InfiniBand architecture External Devices An external device attaches to the computer by a link to an I/O module. The link is used to exchange control, status, and data between the I/O module and the external device. External devices can be classified into 3 categories… Human readable – e.g. video display Machine readable – e.g. magnetic disk Communications – e.g. wifi card I/O Modules An I/O module has two major functions… Interface to the processor and memory via the system bus or central switch Interface to one or more peripheral devices by tailored data links Module Functions The major functions or requirements for an I/O module fall into the following categories… Control and timing Processor communication Device communication Data buffering Error detection I/O function includes a control and timing requirement, to coordinate the flow of traffic between internal resources and external devices. Processor communication involves the following… Command decoding Data Status reporting Address recognition The I/O device must be able to perform device communication. This communication involves commands, status information, and data. An essential task of an I/O module is data buffering due to the relative slow speeds of most external devices. An I/O module is often responsible for error detection and for subsequently reporting errors to the processor. I/O Module Structure An I/O module functions to allow the processor to view a wide range of devices in a simple minded way. The I/O module may hide the details of timing, formats, and the electro mechanics of an external device so that the processor can function in terms of simple reads and write commands. An I/O channel/processor is an I/O module that takes on most of the detailed processing burden, presenting a high-level interface to the processor. There are 3 techniques are possible for I/O operations Programmed I/O Interrupt[t I/O DMA Access Programmed I/O When a processor is executing a program and encounters an instruction relating to I/O it executes that instruction by issuing a command to the appropriate I/O module. With programmed I/O, the I/O module will perform the requested action and then set the appropriate bits in the I/O status register. The I/O module takes no further actions to alert the processor. I/O Commands To execute an I/O related instruction, the processor issues an address, specifying the particular I/O module and external device, and an I/O command. There are four types of I/O commands that an I/O module may receive when it is addressed by a processor… Control – used to activate a peripheral and tell it what to do Test – Used to test various status conditions associated with an I/O module and its peripherals Read – Causes the I/O module to obtain an item of data from the peripheral and place it in an internal buffer Write – Causes the I/O module to take an item of data form the data bus and subsequently transmit that data item to the peripheral The main disadvantage of this technique is it is a time consuming process that keeps the processor busy needlessly I/O Instructions With programmed I/O there is a close correspondence between the I/O related instructions that the processor fetches from memory and the I/O commands that the processor issues to an I/O module to execute the instructions. Typically there will be many I/O devices connected through I/O modules to the system – each device is given a unique identifier or address – when the processor issues an I/O command, the command contains the address of the address of the desired device, thus each I/O module must interpret the address lines to determine if the command is for itself. When the processor, main memory and I/O share a common bus, two modes of addressing are possible… Memory mapped I/O Isolated I/O (for a detailed explanation read page 245 of book) The advantage of memory mapped I/O over isolated I/O is that it has a large repertoire of instructions that can be used, allowing more efficient programming. The disadvantage of memory mapped I/O over isolated I/O is that valuable memory address space is sued up. Interrupts driven I/O Interrupt driven I/O works as follows… The processor issues an I/O command to a module and then goes on to do some other useful work The I/O module will then interrupts the processor to request service when is is ready to exchange data with the processor The processor then executes the data transfer and then resumes its former processing Interrupt Processing The occurrence of an interrupt triggers a number of events, both in the processor hardware and in software. When an I/O device completes an I/O operations the following sequence of hardware events occurs… The device issues an interrupt signal to the processor The processor finishes execution of the current instruction before responding to the interrupt The processor tests for an interrupt – determines that there is one – and sends an acknowledgement signal to the device that issues the interrupt. The acknowledgement allows the device to remove its interrupt signal The processor now needs to prepare to transfer control to the interrupt routine. To begin, it needs to save information needed to resume the current program at the point of interrupt. The minimum information required is the status of the processor and the location of the next instruction to be executed. The processor now loads the program counter with the entry location of the interrupt-handling program that will respond to this interrupt. It also saves the values of the process registers because the Interrupt operation may modify these The interrupt handler processes the interrupt – this includes examination of status information relating to the I/O operation or other event that caused an interrupt When interrupt processing is complete, the saved register values are retrieved from the stack and restored to the registers Finally, the PSW and program counter values from the stack are restored. Design Issues Two design issues arise in implementing interrupt I/O Because there will be multiple I/O modules, how does the processor determine which device issued the interrupt? If multiple interrupts have occurred, how does the processor decide which one to process? Addressing device recognition, 4 general categories of techniques are in common use… Multiple interrupt lines Software poll Daisy chain Bus arbitration For a detailed explanation of these approaches read page 250 of the textbook. Interrupt driven I/O while more efficient than simple programmed I/O still requires the active intervention of the processor to transfer data between memory and an I/O module, and any data transfer must traverse a path through the processor. Thus is suffers from two inherent drawbacks… The I/O transfer rate is limited by the speed with which the processor can test and service a device The processor is tied up in managing an I/O transfer; a number of instructions must be executed for each I/O transfer Direct Memory Access When large volumes of data are to be moved, an efficient technique is direct memory access (DMA) DMA Function DMA involves an additional module on the system bus. The DMA module is capable of mimicking the processor and taking over control of the system from the processor. It needs to do this to transfer data to and from memory over the system bus. DMA must the bus only when the processor does not need it, or it must force the processor to suspend operation temporarily (most common – referred to as cycle stealing). When the processor wishes to read or write a block of data, it issues a command to the DMA module by sending to the DMA module the following information… Whether a read or write is requested using the read or write control line between the processor and the DMA module The address of the I/O device involved, communicated on the data lines The starting location in memory to read from or write to, communicated on the data lines and stored by the DMA module in its address register The number of words to be read or written, communicated via the data lines and stored in the data count register The processor then continues with other work, it delegates the I/O operation to the DMA module which transfers the entire block of data, one word at a time, directly to or from memory without going through the processor. When the transfer is complete, the DMA module sends an interrupt signal to the processor, this the processor is involved only at the beginning and end of the transfer. I/O Channels and Processors Characteristics of I/O Channels As one proceeds along the evolutionary path, more and more of the I/O function is performed without CPU involvement. The I/O channel represents an extension of the DMA concept. An I/O channel ahs the ability to execute I/O instructions, which gives it complete control over I/O operations. In a computer system with such devices, the CPU does not execute I/O instructions – such instructions are stored in main memory to be executed by a special purpose processor in the I/O channel itself. Two types of I/O channels are common A selector channel controls multiple high-speed devices. A multiplexor channel can handle I/O with multiple characters as fast as possible to multiple devices. The external interface: FireWire and InfiniBand Types of Interfaces One major characteristic of the interface is whether it is serial or parallel parallel interface – there are multiple lines connecting the I/O module and the peripheral, and multiple bits are transferred simultaneously serial interface – there is only one line used to transmit data, and bits must be transmitted one at a time With new generation serial interfaces, parallel interfaces are becoming less common. In either case, the I/O module must engage in a dialogue with the peripheral. In general terms the dialog may look as follows… The I/O module sends a control signal requesting permission to send data The peripheral acknowledges the request The I/O module transfers data The peripheral acknowledges receipt of data For a detailed explanation of FireWire and InfiniBand technology read page 264 – 270 of the textbook

  Read the article

• Why Wifi no longer works 12.04.1

  - by Roger

  starting this morning over wifi (Realtek RTL8188CE) on CLEVO W253HU. May be due to the update before yesterday, more pilot managed, but somehow it worked yesterday. If someone has an idea of the problem. Back command lines: cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 006: ID 192f:0416 Avago Technologies, Pte. Bus 002 Device 004: ID 5986:0315 Acer, Inc lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) lspci -nn | grep -i net 02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) 03:00.0 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 05) lspci -k 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: i2c-i801 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. Device 9196 Kernel modules: rtl8192ce 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jme Kernel modules: jme 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: sdhci-pci 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jmb38x_ms Kernel modules: jmb38x_ms sudo lshw -C network *-network NON-RÉCLAMÉ description: Network controller produit: RTL8188CE 802.11b/g/n WiFi Adapter fabriquant: Realtek Semiconductor Co., Ltd. identifiant matériel: 0 information bus: pci@0000:02:00.0 version: 01 bits: 64 bits horloge: 33MHz fonctionnalités: pm msi pciexpress cap_list configuration: latency=0 ressources: portE/S:e000(taille=256) mémoire:f7d00000-f7d03fff *-network description: Ethernet interface produit: JMC250 PCI Express Gigabit Ethernet Controller fabriquant: JMicron Technology Corp. identifiant matériel: 0 information bus: pci@0000:03:00.0 nom logique: eth0 version: 05 numéro de série: 00:90:f5:c1:c6:45 taille: 100Mbit/s capacité: 1Gbit/s bits: 32 bits horloge: 33MHz fonctionnalités: pm pciexpress msix msi bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=jme driverversion=1.0.8 duplex=full ip=192.168.1.54 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s ressources: irq:44 mémoire:f7c20000-f7c23fff portE/S:d100(taille=128) portE/S:d000(taille=256) mémoire:f7c10000-f7c1ffff mémoire:f7c00000-f7c0ffff lsmod Module Size Used by btusb 18288 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 11 btusb,rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 binfmt_misc 17540 1 snd_hda_codec_realtek 224173 0 dm_crypt 23125 0 snd_hda_codec_hdmi 32474 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_hda_intel 33773 2 snd_hda_codec 127706 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi jmb38x_ms 17646 0 psmouse 87692 0 serio_raw 13211 0 memstick 16569 1 jmb38x_ms snd_seq_midi_event 14899 1 snd_seq_midi rtl8192ce 84826 0 rtl8192c_common 75767 1 rtl8192ce rtlwifi 111202 1 rtl8192ce snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq mac80211 506816 3 rtl8192ce,rtl8192c_common,rtlwifi mac_hid 13253 0 snd 78855 14 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 205544 2 rtlwifi,mac80211 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid i915 473035 3 drm_kms_helper 46978 1 i915 drm 242038 4 i915,drm_kms_helper jme 41259 0 i2c_algo_bit 13423 1 i915 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci wmi 19256 0 video 19596 1 i915 iwconfig lo no wireless extensions. eth0 no wireless extensions. ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:c1:c6:45 inet adr:192.168.1.54 Bcast:192.168.1.255 Masque:255.255.255.0 adr inet6: fe80::290:f5ff:fec1:c645/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:4513 erreurs:0 :0 overruns:0 frame:0 TX packets:4359 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:3471675 (3.4 MB) Octets transmis:712722 (712.7 KB) Interruption:44 lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 Packets reçus:686 erreurs:0 :0 overruns:0 frame:0 TX packets:686 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 Octets reçus:64556 (64.5 KB) Octets transmis:64556 (64.5 KB) sudo iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. uname -r -m 3.2.0-30-generic x86_64 cat /etc/network/interfaces auto lo iface lo inet loopback nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Connexion filaire 1] ------------------------------------------ Type: Wired Driver: jme State: connected Default: yes HW Address: 00:90:F5:C1:C6:45 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.54 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 sudo rfkill listrfkill list 1: hci0: Bluetooth Soft blocked: no Hard blocked: no The absence of line "Kernel driver in use:" the return of lspci-k made ??me think that it is not loaded yet but he seems to be. lsmod | grep rtl8192ce rtl8192ce 137478 0 rtlwifi 118749 1 rtl8192ce mac80211 506816 2 rtl8192ce,rtlwifi I found something disturbing in / var / log / syslog Sep 14 11:40:11 pcroger kernel: [ 64.048783] rtl8192ce-0:rtl92c_init_sw_vars():<0-0> Failed to request firmware! Sep 14 11:40:11 pcroger kernel: [ 64.048795] rtlwifi-0:rtl_pci_probe():<0-0> Can't init_sw_vars. Sep 14 11:40:11 pcroger kernel: [ 64.048835] rtl8192ce 0000:02:00.0: PCI INT A disabled Sep 14 11:40:11 pcroger kernel: [ 64.943345] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen Sep 14 11:40:11 pcroger kernel: [ 64.943358] ata1.00: failed command: READ FPDMA QUEUED Sep 14 11:40:11 pcroger kernel: [ 64.943371] ata1.00: cmd 60/00:00:00:68:6a/04:00:0b:00:00/40 tag 0 ncq 524288 in Sep 14 11:40:11 pcroger kernel: [ 64.943374] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Sep 14 11:40:11 pcroger kernel: [ 64.943381] ata1.00: status: { DRDY } Ubuntu and takes forever to start (2 min).

  Read the article

• Wammu - USB Device Name?

  - by Paul

  I'm trying to get to my phone's filesystem through USB in Wammu, but I'm stuck in the configuration wizard when it asks for a USB device name. After about an hour of Internet searching, here are the failed solutions I've already tried, starting with the relevant information returned by lsusb in terminal. lsusb Bus 001 Device 003: ID 12d1:101e Huawei Technologies Co., Ltd. So I tried opening Wammu through sudo wammu in terminal and inputting "/dev/bus/usb/001/003" as the device name, which returns: Error opening device Device /dev/bus/usb/001/003 does not exist! and then "/dev/bus/usb/001/", which returns: Failed to connect to phone Description: Error opening device. Unknown, busy, or no permissions.<br> Function: Init<br> Error code: 2 Another proposed solution was to try "tail -f /var/log/messages" in terminal. But that only returned a "No such file or directory" message. Seemingly relevant dmesg info: [ 4739.716214] usb 1-1: new high-speed USB device number 8 using ehci_hcd [ 4739.854137] scsi9 : usb-storage 1-1:1.0 [ 4740.854416] scsi 9:0:0:0: CD-ROM HUAWEI T Mass Storage 2.31 PQ: 0 ANSI: 2 [ 4740.867051] sr0: scsi-1 drive [ 4740.867806] sr 9:0:0:0: Attached scsi CD-ROM sr0 [ 4740.870464] sr 9:0:0:0: Attached scsi generic sg1 type 5 I don't know why it is coming up as CD-ROM. But there it is. If you haven't noticed already, I'm an absolute beginner when it comes to Linux and terminal. So speaking to me like I'm a three year old is welcome if you can propose a solution. I'm running Ubuntu 12.04 LTS, and the phone is a Huawei U1250. My computer is an Acer Aspire One D250/KAV60. Any help is much appreciated.

  Read the article

• How to write code that communicates with an accelerator in the real address space (real mode)?

  - by ysap

  This is a preliminary question for the issue, where I was asked to program a host-accelerator program on an embedded system we are building. The system is comprised of (among the standard peripherals) an ARM core and an accelerator processor. Both processors access the system bus via their bus interfaces, and share the same 32-bit global physical memory space. Both share access to the system's DRAM through the system bus. (The computer concept is similar to Beagleboard/raspberry Pie, but with a specialized accelerator added) The accelerator has its own internal memory (SRAM) which is exposed to the system and occupies a portion of the global address space (as opposed to how a graphics card would talk to teh CPU via a "small" aperture in the system memory space). On the ARM core (the host) we plan on running Ubuntu 12.04. The mode of operation of communicating between the processors should be that the host issues memory transactions on the system bus that are targeted at the accelerator internal memory. As far as my understanding goes, if I write a program for the host that simply writes to the physical address of the accelerator, most chances are that the program will crash due to a segmentation violation. So, I assume that I need some way of communicating with the device in real mode. What is the easiest way to achieve this mode of operation?

  Read the article

• How to Fix “Error occurred in deployment step ‘Activate Features’: System.TimeoutException:”

  - by ybbest

  Problem: When deploying a SharePoint2013 workflow using Visual Studio, I got the following Error: Error occurred in deployment step ‘Activate Features’: System.TimeoutException: The HTTP request has timed out after 20000 milliseconds. —> System.Net.WebException: The request was aborted: The request was canceled. at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult) at Microsoft.Workflow.Client.HttpGetResponseAsyncResult`1.OnGotResponse(IAsyncResult result) — End of inner exception stack trace — at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result) at Microsoft.Workflow.Client.Ht Analysis: After reading AC’s blogpost and I find out the issue is to do with the service bus. Then I found out the following services are not started Solution: So I start the Service Bus Gateway and Service Bus Message Broker and the problem goes away. References: SharePoint 2013 Workflow – Advanced Workflow Debugging with Fiddler

  Read the article

• Rob Blackwell on interoperability and Azure

  - by Eric Nelson

  At QCon in March we had a sample Azure application implemented in both Java and Ruby to demonstrate that the Windows Azure Platform is not just about .NET. The following is an interesting interview with Rob Blackwell, the R&D director of the partner who implemented the application. UK Interoperability Team Interviews Rob Blackwell, R&D Director at Active Web Solutions. Is Microsoft taking interoperability seriously? Yes. In the past, I think Microsoft has, quite rightly come in for criticism, but architects and developers should look at this again. The Interoperability Bridges site (http://www.interoperabilitybridges.com/ ) shows a wide range of projects that allow interoperability from Java, Ruby and PHP for example. The Windows Azure platform has been architected with interoperable APIs in mind. It's straightforward to access the various storage facilities from just about any language or platform. Azure compute is capable of running more than just C# applications! Why is interoperability important to you? My company provides consultancy and bespoke development services. We're a Microsoft Gold Partner, but we live in the real world where companies have a mix of technologies provided by a variety of vendors. When developing an enterprise software solution, you rarely have a completely blank canvas. We often see integration scenarios where we need to exchange data with legacy systems. It's not unusual to see modern Silverlight applications being built on top of Java or Mainframe based back ends. Could you give us some examples of where interoperability has been important for your projects? We developed an innovative Sea Safety system for the RNLI Lifeboats here in the UK. Commercial Fishing is one of the most dangerous professions and we helped developed the MOB Guardian System which uses satellite technology and man overboard devices to raise the alarm when a fisherman gets into trouble. The solution is implemented in .NET running on Windows, but without interoperable standards, it would have been impossible to communicate with the satellite gateway technology. For more information, please see the case study: http://www.microsoft.com/casestudies/Case_Study_Detail.aspx?CaseStudyID=4000005892 More recently, we were asked to build a web site to accompany the QCon 2010 conference in London to help demonstrate and promote interoperability. We built the site using Java and Restlet and hosted it in Windows Azure Compute. The site accepts feedback from visitors and all the data is stored in Windows Azure Storage. We also ported the application to Ruby on Rails for demonstration purposes. Visitors to the stand were surprised that this was even possible. Why should Java developers be interested in Windows Azure? Windows Azure Storage consists of Blobs, Queues and Tables. The storage is scalable, durable, secure and cost-effective. Using the WindowsAzure4j library, it's easy to use, and takes just a few lines of code. If you are writing an application with large data storage requirements, or you want an offsite backup, it makes a lot of sense. Running Java applications in Azure Compute is straightforward with tools like the Tomcat Solution Accelerator (http://code.msdn.microsoft.com/winazuretomcat )and AzureRunMe (http://azurerunme.codeplex.com/ ). The Windows Azure AppFabric Service Bus can also be used to connect heterogeneous systems running on different networks and in different data centres. How can The Service Bus be considered an interoperability solution? I think that the Windows Azure AppFabric Service Bus is one of Microsoft’s best kept secrets. Think of it as “a globally scalable application plumbing kit in the sky”. If you have used Enterprise Service Buses before, you’ll be familiar with the concept. Applications can connect to the service bus to securely exchange data – these can be point to point or multicast links. With the AppFabric Service Bus, the applications can exist anywhere that has access to the Internet and the connections can traverse firewalls. This makes it easy to extend or scale your application or reach out to other networks and technologies. For example, let’s say you have a SQL Server database running on premises and you want to expose the data to a Java application running in the cloud. You could set up a point to point Service Bus connection and use JDBC. Traditionally this would have been difficult or impossible without punching holes in firewalls and compromising security. Rob Blackwell is R&D Director at Active Web Solutions, www.aws.net , a Microsoft Gold Partner specialising in leading edge software solutions. He is an occasional writer and conference speaker and blogs at www.robblackwell.org.uk Related Links: UK Azure Online Community – join today. UK Windows Azure Site Start working with Windows Azure

  Read the article

• Can't connect to Wired Network after installing 12.04

  - by ezz9

  I have installed 12.04 into a used HP Compaq DC 7100 CMT. Plugged in LAN cable into the computer and it says network disconnected. from what I understand on the things I've read, it's not getting the address right, maybe it's just a guess (hardware address 00:16:35:78:47:bb). I know the LAN cable is working I can get on the net with the old computer. (Old computer is using device MAC address; Auto eth0 00:11:11:E6:4F:FE). I have put this address into the newer HP and it shows last used (minutes ago) but no Internet sever not found. I tried the hardware address it says never. I feel and think this should be easy to fix. But I just don't know. Here is the info everyone has asked for, but they never say what I should do. sudo lshw -C network; rfkill list; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; uname -a; ifconfig; route -n *-network description: ethernet interface product; NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:40:00.0 logical name: eth0 verson: 01 serial: 00:16:35:78:47:bb size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000-fd configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion= 3.121 duplex=full firmware=5751-v3.29a latency=0 link=yes multicast=yes port=twi sted pair speed=100Mbit/s resources: irq:17 memory:f0400000-f040ffff auto lo iface lo inet loopback DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION= "Ubuntu 12.04 LTS" 00:00.0 host bridge [0600]: Inter Corporation 82915G/P/GV/GL/PL/910GL Memory Con troller Hub [8086:2580] (rev 04) 00.02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL inte grated Graphics Controller [8086:2582] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03) 00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #1 [8086:2658] (rev 03) 00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #2 [8086:2659] (rev 03) 00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #3 [8086:265a] (rev 03) 00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #4 [8086:265b] (rev 03) 00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB2 UHCI Controller [8086:265c] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI bridge [8086:244e] (rev d 3) 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/ FRW (ICH6 Family) AC'97 Autio conrtroller [8086:266e] (rev 03) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/RF (ICH6/ICH6R) LPC Interfa ce Bridge [8086:2640] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 fami ly) IDE Controller [8086:266f] (rev 03) 00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Con troller [8086:2651] (rev 03) 40:00.0 Ethernet controller [0200]: Broadcom Corporation NetXreme BCM5751 Gigab it Ethernet PCI Express [14e4:1677} (rev 01) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Linux bob-desktop 3.2.0-23-generic-pae #36-Ubuntu SMP Tpr 10 22:19:09 UTC 20 12 i686 i686 i386 GNU/Linux eth0 Link encap:Ethernet HWaddr 00:16:35:78:47:bb inet6 addr: fe80::216:35ff:47bb/64 Scope:link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2517 errors:0 dropped:0 overruns:0 frame:0 TX packets:164 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:164508 (164.5 KB) TX bytes: 40884 (40.0 KB) Interrupt:17 lo Link encap:Local loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3290 errors:0 dropped:0 overruns:0 frame:0 TX packets:3290 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen: 0 RX bytes:267212 (267.2 KB) TX bytes: 267212 (267.2 KB) Kernel Ip routing table Destination Gateway Genmask Flags Metric Ref Use Iface ran this sudo dhclient eth0 no reply ran this ip addr 1: lo <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST ,MULTICAST ,UP ,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/enter 00:16:35:78:47:BB brd ff:ff:ff:ff:ff:ff inet 169.254.7.172/16 brd 169.254.255.255 scope link eth0:avahi inet6 fe80::216:35ff:fe78:47bb/64 scope link valid_lft forever preferred_lft forever Help please.

  Read the article

• Cannot connect to secure wireless with Netgear wna3100 USB

  - by Vince Radice

  I have installed Ubuntu 11.10. I used a wired connection to download and install all of the updates. When I tried to use a Netgear WNA3100 wireless USB network adapter, it failed. Much searching and trying things I was finally able to get it working by disabling security on my router. I have verified this by disabling security and I was able to connect. When I enabled security (WPA2 PSK), the connection failed. What is necessary to enable security (WPA2 PSK) and still use the Netgear USB interface? Here is the output from the commands most requested lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] lshw -C network *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:40:ca:44:e6:3e size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=32 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:c800(size=256) memory:ee011000-ee0110ff memory:40000000-4000ffff *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: e0:91:f5:56:e1:0d capabilities: ethernet physical wireless configuration: broadcast=yes driver=ndiswrapper+bcmn43xx32 driverversion=1.56+,08/26/2009, 5.10.79.30 ip=192.168.1.104 link=yes multicast=yes wireless=IEEE 802.11g iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:"vincecarolradice" Mode:Managed Frequency:2.422 GHz Access Point: A0:21:B7:9F:E5:EE Bit Rate=121.5 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:off Power Management:off Link Quality:76/100 Signal level:-47 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ndiswrapper -l bcmn43xx32 : driver installed device (0846:9020) present lsmod | grep ndis ndiswrapper 193669 0 dmesg | grep -e ndis -e wlan [ 907.466392] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 907.838507] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'IoUnregisterPlugPlayNotification' [ 907.838955] ndiswrapper: driver bcmwlhigh5 (Netgear,11/05/2009, 5.60.180.11) loaded [ 908.137940] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmwlhigh5, version: 0x53cb40b, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 908.141879] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 908.143048] usbcore: registered new interface driver ndiswrapper [ 908.178826] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 994.015088] usbcore: deregistering interface driver ndiswrapper [ 994.028892] ndiswrapper: device wlan0 removed [ 994.080558] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 994.374929] ndiswrapper: driver bcmn43xx32 (,08/26/2009, 5.10.79.30) loaded [ 994.404366] ndiswrapper (mp_init:219): couldn't initialize device: C0000001 [ 994.404384] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001) [ 994.404666] ndiswrapper (mp_halt:262): device e05b6480 is not initialized - not halting [ 994.404671] ndiswrapper: device eth%d removed [ 994.404709] ndiswrapper: probe of 1-5:1.0 failed with error -22 [ 994.406318] usbcore: registered new interface driver ndiswrapper [ 2302.058692] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmn43xx32, version: 0x50a4f1e, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 2302.060882] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 2302.113838] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2354.611318] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2355.268902] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2365.400023] wlan0: no IPv6 routers present [ 2779.226096] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2779.422343] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2797.574474] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2802.607937] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2803.261315] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2813.952028] wlan0: no IPv6 routers present [ 3135.738431] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3139.180963] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3139.816561] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.229872] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.444542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.758297] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.860684] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.118732] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.139553] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.300542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3353.341402] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3363.266399] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.505475] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.506619] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3363.717203] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.779206] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.206152] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.248624] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.577664] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3438.852457] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3438.908573] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.282995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.325237] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.460716] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.461763] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.809776] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.880641] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.122848] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.148328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.324502] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3636.088798] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3636.712186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3647.600040] wlan0: no IPv6 routers present I am using the system now with the router security turned off. When I submit this, I will turn security back on.

  Read the article

• Unable to use TL-WN821N

  - by udiw

  Hi, I got a TP-LINK USB wireless module - TL-WN821N, using Ubuntu 10.4 (same problems were also seen in 10.10). From everything I've read online, the usb should work just fine, since the Atheros ar9170 is built into the kernel. However, when I plug it in, it is detected as a USB device, but there is no wlan associated with it, and basically - nothing happens. Am I doing something wrong? what should I do so that the Atheros driver is associated with this device? btw, on Windows it works fine (with the drivers). Some logs: $ uname -mr 2.6.32-28-generic i686 $ lsb_release -d Description: Ubuntu 10.04.2 LTS $ lsusb ... (trimmed) Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 017: ID 0cf3:7015 Atheros Communications, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub $ lsmod |grep ar9 ar9170usb 51296 0 ath 7611 1 ar9170usb mac80211 205402 3 ar9170usb,iwl3945,iwlcore cfg80211 126528 5 ar9170usb,ath,iwl3945,iwlcore,mac80211 led_class 2864 4 ar9170usb,iwl3945,iwlcore,sdhci

  Read the article

• udev rule group ownership not working

  - by Tirithen

  I have added a udev rule for my Arduino, but the symlink gets the ownership "root root" instead of "root dialout". $ cat /etc/udev/rules.d/47-Arduino.rules SUBSYSTEM=="usb", ATTR{idVendor}=="2341", ATTR{idProduct}=="0001", MODE="0666", SYMLINK+="arduino", GROUP="dialout" $ ls -la /dev/ar* lrwxrwxrwx 1 root root 15 sep 8 11:02 /dev/arduino -> bus/usb/003/007 $ ls -la /dev/bus/usb/003/007 crw-rw-r-- 1 root dialout 189, 262 sep 8 11:12 /dev/bus/usb/003/007 My user is a member of the group "dialout" but I still get permission denied error when I'm trying to communicate with the device. There are no problems when I'm using the "default" device "/etc/ttyACM3". $ ls -la /dev/ttyACM3 crw-rw---- 1 root dialout 166, 3 sep 8 11:12 /dev/ttyACM3 I have tried to restart both the udev service and reboot my computer. How can I fix this?

  Read the article

• udev rule gives wrong group ownership

  - by Tirithen

  I have added a udev rule for my Arduino, but the symlink gets the ownership "root root" instead of "root dialout". $ cat /etc/udev/rules.d/47-Arduino.rules SUBSYSTEM=="usb", ATTR{idVendor}=="2341", ATTR{idProduct}=="0001", MODE="0666", SYMLINK+="arduino", GROUP="dialout" $ ls -la /dev/ar* lrwxrwxrwx 1 root root 15 sep 8 11:02 /dev/arduino -> bus/usb/003/007 $ ls -la /dev/bus/usb/003/007 crw-rw-r-- 1 root dialout 189, 262 sep 8 11:12 /dev/bus/usb/003/007 My user is a member of the group "dialout" but I still get "Permission Denied" error when I'm trying to communicate with the device. There are also no problems when I'm using the "default" device "/etc/ttyACM3". $ ls -la /dev/ttyACM3 crw-rw---- 1 root dialout 166, 3 sep 8 11:12 /dev/ttyACM3 I have tried to restart both the udev service and reboot my computer. How can I fix this?

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >