Search Results

Search found 2346 results on 94 pages for 'dedicated'.

Page 13/94 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• Selection between two laptops for casual gaming [closed]

  - by Prabhpreet

  I have selected two laptops that meet my budget. Here are the differences: Laptop #1: 4GB Ram, Intel Core i5 2450M 2nd Gen processor w/ 2.5 Ghz clockspeed NVIDIA GeForce GT 520MX DDR3 1 GB Dedicated Graphics 750 GB SATA II Hard disk USB 2.0 Ports 6 hrs battery life Laptop #2: 4 GB Ram, Intel Core i5 3210M 3rd Gen processor w/ 2.5 Ghz clockspeed Integrated Intel HD Graphics 4000 500 GB SATA Hard disk USB 3.0 Ports 3 hrs battery life (This concerns me) First and foremost, does dedicated graphics matter for a casual gamer like me? Secondly, does the generation of the processors make a difference despite the same clockspeed. Thirdly, do usb 3.0 ports make a difference? And lastly, which laptop is more future proof? Please help me out. Thanks!

  Read the article

• Adding IP address to OpenVZ VPS (OpenVZ Web Panel)

  - by andy

  I apologise if I sound at all dumb. This is my first dedicated server having used a VPS for over a year and I'm trying to setup a VPS on this new server. I purchased a subnet from my hosting provider that I believe allows me 6 usable IP addresses: 177.xx.xxx.201 - 177.xx.xxx.206 The subnet address looks like this: 177.xx.xxx.200/29. I've gone on my server and added them like it said on a wiki like so: ip addr add 177.**.***.201/29 dev eth0 I done that for all six and now when I go to them in the browser they point to my server. The problem is, I'm using OpenVZ web panel to create VMs (http://code.google.com/p/ovz-web-panel/) so I created a VM and assigned one of those IPs to it. However when SSHing to that IP it SSH's to the dedicated server and not the VM. Am I missing something?

  Read the article

• How to grow from single server setup

  - by Jenkz

  I'm looking for resources on how to grow our server setup. We currently have one dedicated server with Rackspace in the UK of the following spec: HPDL385_G2_PrevGen HP Single Dual Core Opteron 2214 (2.2Ghz) 4GB RAM 2x 10,000 SCSI Drives in RAID 1 Our traffic is up to 550,000 UVs per month. The site runs off a PHP and MySQL setup. The database gets an absolute hammering, we have many complex queries joining multilpe tables. We are using APC for PHP caching. I'm getting to the stage where I've done as much DB and query optimisation as I can and wonder what the next step should be...... I've looked at memcache, but I've got the impression that his requires a large amount of RAM and ideally a dedicated box.... So is the next step to have two boxes; one for database, one for Apache? Or is there a step I've overlooked. Our load is usually around the 2 mark, but right now it's up at 20!

  Read the article

• How to grow from single server setup

  - by Jenkz

  I'm looking for resources on how to grow our server setup. We currently have one dedicated server with Rackspace in the UK of the following spec: HPDL385_G2_PrevGen HP Single Dual Core Opteron 2214 (2.2Ghz) 4GB RAM 2x 10,000 SCSI Drives in RAID 1 Our traffic is up to 550,000 UVs per month. The site runs off a PHP and MySQL setup. The database gets an absolute hammering, we have many complex queries joining multilpe tables. We are using APC for PHP caching. I'm getting to the stage where I've done as much DB and query optimisation as I can and wonder what the next step should be...... I've looked at memcache, but I've got the impression that his requires a large amount of RAM and ideally a dedicated box.... So is the next step to have two boxes; one for database, one for Apache? Or is there a step I've overlooked. Our load is usually around the 2 mark, but right now it's up at 20!

  Read the article

• (Free?) Hosting Control Panels

  - by Alix Axel

  I've installed and used both cPanel and Plesk on my dedicated servers in the past and I truly enjoyed the features and simplicity of cPanel (specially the auto-update feature in WHM), recently (a couple of months ago) I also tried a beta version of the open-source OpenPanel and although it looks really nice I found it kinda limited in terms of features, such as automatic system updates, automatic backups and the ability to add addicional hosts to the MySQL allowed clients list - just to name a few. Besides OpenPanel, I'm aware of Usermin, Webmin, Virtualmin, ISPConfig, VHCS, web-cp and FlexCP - although I've never had the opportunity to try any of them before... Are you familiar and recommend any of these? It's been a while since I managed a dedicated server and I'm wondering what would be a good hosting control panel for me, preferably a free / open-source one that has similar features / usability of cPanel. I appreciate all input, thanks! =)

  Read the article

• Protect me from this perl syn flood script [closed]

  - by Luka

  Possible Duplicate: How to best defend against a “slowloris” DOS attack against an Apache web server? As everybody here I was interested in hacking in a period of time, using a perl scripts. CSF is protecting me from every perl script which can make damage. But not from this one here: http://pastebin.com/CfRiSVkQ It's Syn Flood script, when I attack my dedicated server from another dedicated with 100MBPS link csf is detecting the attack and he always block attackers address but I am flooded and sites are down, I get email from csf, but attack is still damaging sites! Then I need to restart httpd, csf and sites are online again...

  Read the article

• Plesk 10 Postfix with multiple IP adresses and SSL certificates

  - by JulianB

  We are currently running a root server with Debian 6 and Plesk 10.4.4. We have some virtual hosts using one IP adress (shared) - e.g. example1.com - and another virtual host using a dedicated IP address (example2.com). Is there a way to configure postfix to do the following Always use the IP address of the virtual host to which the e-mail account belongs (so that an e-mail from [email protected] will originate from the shared IP-Address and an e-mail from [email protected] will originate from the dedicated IP? Use different certificates for TLS for example1.com and example2.com? If the latter is not possible: Could any problems arrive when using example1.com as certificate for example2.com users? Of course, example2.com users would have to configure their clients to use example1.com as the SMTP server name to avoid annoying security warnings. But if we still would be able to get the effect of the first point that would still be acceptable.

  Read the article

• Help about NAT with virtual server

  - by Thanh Tran

  I have a dedicated server running Linux CentOS 5.3 with 2 IP addresses. I've installed a virtual machine using VMware Server. The host and the guest have a host-only network. Now I want to map the 2nd IP address to the virtual machine so that it can run as a second dedicated server for me. Here is what I do: modprobe iptable_nat echo "1" > /proc/sys/net/ipv4/ip_forward iptables -t filter -A FORWARD -s 192.168.78.128 -d 64.85.164.184 -j ACCEPT iptables -t nat -A PREROUTING -d 64.85.164.184 -i eth0 -j DNAT --to-destination 192.168.78.128 iptables -t nat -A POSTROUTING -s 192.168.78.128 -o eth0 -j SNAT --to-source 64.85.164.184</p> But it not working as intended. What is the matter?

  Read the article

• What kind of server do I need to handle 10 million requests and mySQL queries a day?

  - by Calvin

  I'm a new bie of server administration and I'm looking for a powerful hosting service to host my new website. This website is basically a back-end of an mobile online game, and it will: handle up to 10 million of HTTPS request and mySQL queries a day store up to 2000 GB file on the hard disk transfer probably 5000 GB data in and out per month it runs on PHP and mySQL have 10 million records in mySQL database, for each record there are 5-10 fields, around 100 bytes each I really don't know what kind of a server I need to handle these requirements, my question is: what cpu/ram do I need for a dedicated server or vps? what hosting companies are able to offer this kind of dedicated server or VPS? what about cloud computing? I've researched Amazon EC2 but it seems complicated to me. And I've contacted Rackspace but strangely they said Cloudsites is not suitable for my requirements. I wonder if there is other cloud hosting company. any other alternative method? thanks very much!

  Read the article

• One Mac computer with multiple network connections?

  - by Kyle Lowry

  I have a Mac (OS X 10.5) that I would like to connect to a dedicated/isolated Internet connection (one that is not connected to the LAN), and a LAN. The LAN is set up with its own, separate, Internet connection which is shared by several dozen computers (and is quite slow). I want to set it up so that the Mac uses its own dedicated Internet connection (on a different account with a different company) for its Internet access, but can still access the local area network as well. How can I configure the Mac & the network to allow this?

  Read the article

• DNS Propagation Investigation Techniques?

  - by darkAsPitch

  So I changed the nameservers to veeter.com about 5 days ago now - and the domain is still not resolving over the net. It does intermittently, but then cuts out again every few hours. I run 10+ other domains through the same dedicated server (running CentOS/WHM) and they are all up - so it has nothing to do with that. I have asked my dedicated server support staff what the problem might be, they told me to "log into WHM and click on 'Add a DNS Zone' under the 'DNS Functions' section on the left hand side of the screen. Once you have done this and dns fully propagates it should resolve any intermittent dns issues you may be experiencing." BUT there is already a DNS zone in place for the domain on my server - so what should I do

  Read the article

• Getting packets from one port to another on a Dell PowerConnect 2824 switch

  - by Arvo Bowen

  I have a dell PowerConnect 2824 and I have a cat 5 cable connected from port 1 to port 23. Port 1 is reserved for VLAN 1 (the only VLAN that can manage the switch) and port 18-23 belong to VLAN 112. I currently have the switch setup with ip 10.71.3.5/27 and a test machine plugged into port 22 with IP address 10.71.3.30/27. For some reason I can not ping 10.71.3.5 from my test machine (10.71.3.30). Note: When I try to ping the server plugged into port 21 (IP: 10.71.3.7/27) also VLAN 112, I get responses just fine. Note: When I plug my test machine directly into port 1, I can ping 10.71.3.5 just fine. Quick Recap: Switch IP: 10.71.3.5 Port 1 - dedicated to management - (VLAN1) Port 21 - SERVER (10.71.3.7/27) - (VLAN112) Port 22 - test machine (10.71.3.30/27) - (VLAN112) Port 23 - dedicated to management (to hop over to VLAN 1 from VLAN 112) - (VLAN112)

  Read the article

• Is my disk hot or not?

  - by adriangrigore

  I am trying to figure out the temperature of my dedicated server's harddisk. For this purpose, I've downloaded HDTune to monitor the S.M.A.R.T. Status. The problem is that the current temperature for "C2 Temperature" is 73 degrees celsius, but the little thermometer on top of the window shows 27 degrees celsius. See this screenshot: http://screencast.com/t/OGJhZGIxND Another monitoring software (Anfibia Reactor) shows similar behavior: Disk temperature is around 30 degrees, but it says that the disk is too hot. So, is my disk hot or not? Since this is a dedicated server, I can't just open the case and put a thumb on it.

  Read the article

• Are Plesk server backups useful?

  - by Michael T. Smith

  I'm working for a startup now, and I'm the programmer. Because of our small team size, I'm also handling the server management for now (until we get a dedicated server administrator.) I've never used Plesk before, and the server we're using (a Media Temple Dedicated Virtual server) had it installed when I got here. One of my first jobs was to set up backups: Plesk was already running it's nightly server-wide backups. I created a small script to dump the web app, it's DBs and any assets, tar them, store them, and then copy them to another small server we have (to backup the backups.) But, we're constantly running into hard drive space issues because of the Plesk backups. And I'm wondering, are they useful? If I have the web app and all of it's assets, I could easily enough get another server up and running. Do we need to keep running Plesk's backups? Thoughts?

  Read the article

• SharePoint Server Farm, what to do with an old server?

  - by tekiegreg

  Hi there, so we've procured a monster of a SQL Cluster and 4 screaming fast machines running the apps/WFE to start up our MOSS 2007 Enterprise Server farm, however I've got one server from the old server farm configuration that was just re-imaged and is still running decently, it's a 32 bit machine where the others are 64 bit machines so it really can't serve the same role as a 64 bit machine. I'd like to see if there's a role for it somewhere in the farm, a few thoughts: --Dedicated Search Query Server --Dedicated Excel Services Has anyone out there been in a similar situation? What did they do?

  Read the article

• Virtual Machine Performance - More RAM or More Processor?

  - by webworm

  When looking to improve Virtual Machine performance what would be better ... Increasing the available RAM or increasing the processor power? Here is my choice ... Core 2 Duo @ 2.4 GHz with 8 GB RAM and integrated graphics (Mac Book Pro 13") Core i7 @ 2.6 GHz with 4 GB RAM and 512 MB dedicated graphics (Mac Book Pro 15") I plan to run Windows x64 in the VM with SQL Server 2008, Visual Studio 2010, and SharePoint 2010. I am planning to run VMWare Fusion v3. I also didn't know if a dedicated graphics card makes a difference when using a Virtual Machine. Thank you.

  Read the article

• error on remote connection to mysql

  - by Ahmet vardar

  Hi, I ve been trying to connect my dedicated server mysql db from my computers localhost my code is here; $dbhost = 'domain.com'; $dbuser = 'username'; $dbpass = 'pass'; $conn = mysql_connect($dbhost, $dbuser, $dbpass) or die('Could not connect: ' . mysql_error()); $dbname = 'dbname'; mysql_select_db($dbname); I get that error Could not connect: Lost connection to MySQL server at 'reading initial communication packet', system error: 61 Dedicated server is Linux centos 64 bit, php 3.2.4, mysql 5.1.54 Is there any workaround that ? Thanks

  Read the article

• Changed file and now I cannot access my SSH anymore

  - by Arnold

  I was trying to get my dedicated server to have a couple of VPS's installed using this tutorial: http://linux-vserver.org/Installation_on_CentOS In the process I had to change a file: /etc/ssh/sshd_config The documentation advises to change it into: ListenAddress <host IP address> Guess what? I literally added <host IP address> instead of the dedicated servers IP. I restarted the server and now I'm not able to access my SSH anymore. Can anyone help me to gain access to my SSH again? I'm using CentOS 6.

  Read the article

• Updated: NLB 2 Windows Server 2003 Servers - Looking to Hire SysAdmin to solve!

  - by Paul Hinett

  I need to configure windows NLB on 2 dedicated servers I have. My main machine has been running for some time, with several domain names pointing to the servers primary IP address. Both servers have 2 NIC's installed, and both have several secondary public IP addresses available if needed? What IP address would I use for the cluster IP, does this IP need to be added to the IP list of both public NIC's ip address list? What IP addresses do I use for the host's dedicated IP? Please help, this is driving me nuts...i've taken down the server twice on accident today! UPDATE: Looking to hire a windows SysAdmin to solve! I have updated my question, i would like to hire a trusted windows SysAdmin to take care of this for me, preferably today...can anyone help and provide some credentials please? Thank you in advance!

  Read the article

• High disk time on sql-server

  - by Patrik

  Hi We have a dedicated sql-server 2008 r2 enterprise edition. The setup is: D: (data files) - stored on local ssd disks (not the same disks as log files) (raid 10) E: (log files) - stored on local ssd disks (not the same disks as data files) (raid 1) F: (transaction log backup) - stored remote on a SAN Today we moved our log files to new disks (from F: to E:). From a shared volume ( F:(SAN)) to dedicated local disks (E:). What then happend was that the "disk time", "avg. transfer time" and "avg disk write queue length" increased on the volume where we have the data files (D:) (not on the volume where the log files are located). The data volume and log volume does not share disks, however they share the same controller card. "Disk idle time" is low for all volumes. One thought is ofcourse that the controller card might be overloaded. But, we need more ideas on where the problem might be.

  Read the article

• BGP Router reccomendations for simple redundancy [closed]

  - by Jona

  We have two sites that each have an internet connection and have a dedicated dark fibre between them. Each site has it's own IP space and we have an AS number. We're looking to be resilient to failure of the internet connection to either site and so need to buy a pair of approriate routers. Requirements are: Able to run 2 bgp sessions (one with the ISP, one with the other site router) Option to take a full table from the upstream ISPs would be nice. Able to provide HA gateways on the LAN side (e.g. 192.168.0.254 will automatically migrate if it's host router lost power) A dedicated device rather than a server running Linux / BSD Not crazy expensive. Any help / advice much appreciated.

  Read the article

• Enable live streaming on website

  - by Somebody

  I have a server colocated in a datacentre (dedicated 1Gbit line, SSDs, etc.) running CentOS 5.4 64-bit. I want to stream live video from a device (webcam, camcorder, whatever.) to my server which inturn can re-broadcast it on demand through a flash player (such as Flowplayer) so that more users will be able to watch the stream since the server is quite fast. Does a solution like this exist already (streaming software from live source to flash media server) or will I need to hire someone to code it? I see that VLC has an option to stream video.. will that be suitable in this case? Or is there a better way to do it? I don't want a browser based solution on my end. It'll be great if this can be done without running an X server but I don't mind either way. This will be running on a dedicated PC at home.

  Read the article

• Increasing load capacity for growing website

  - by markxi

  My website currently runs on a dedicated web server (with LiteSpeed) and dedicated MySQL database server. It's a download based site with a lot of user-generated content, which can be streamed and downloaded, there are also thousands of thumbnails and static content. I'm at the stage where the web server can no longer handle the amount of traffic, so I'm looking a how best to increase capacity considering the large amount of downloadable content. My host suggests mirroring everything on a second web server and distributing the load between them using either DNS Made Easy, or to have my own load balancer (using ldirector) in front of the two web servers. Could anyone advise whether the above method would be the best option? Does any one have any experience with DNS Made Easy and/or ldirector? I'd appreciate any help.

  Read the article

• How to backup a full Centos Server?

  - by benjisail

  Hi, I switched a few weeks ago from a dedicated server to a VPS. Now that everything is working well on the VPS I would like to shutdown the dedicated server and close my account with the hosting company. For peace of mind and in order to be more safe I would like to do a full backup of the server before stopping it. The best would be a backup that I could browse if I find that I need a something in the backup. What would be the best solution from command line? Thanks!!!

  Read the article

• How can I toggle Full Screen mode in Remote Desktop without a Break key?

  - by Jay Bazuzi

  My small laptop has a small keyboard, which lacks a Pause/Break key. Ctrl-Alt-Break toggles Full Screen mode in Windows Remote Desktop. Without a Break key, how can I enter Full Screen mode? I know I can exit fullscreen mode with the mouse. Maximizing the window doesn't help. This matters more on small laptops because the screens are small (so you need all the real estate you can get) and because the keyboard lacks dedicated PgUp/PgDn and other dedicated keys (so I can't easily use the RDP alternatives like Alt-PgUp).

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >