Search Results

Search found 503 results on 21 pages for 'fx'.

Page 13/21 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

  • Slow USB 3.0 speeds

    - by Cygnus X
    Long time forum forager, first time poster. I bought a Toshiba 500 GB usb 3.0 hard drive last week and instantly ran home to see how fast I could push it. On my desktop (that I built) I was able to get 200 MB/sec. On my laptop (MSI FX something or other), which I dual boot Windows 7/Ubuntu 11.10, I was able to get about 120 MB/sec on Windows, but on Ubuntu, i get about 25 MB/sec. lsusb shows: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0bda:0139 Realtek Semiconductor Corp. Bus 002 Device 003: ID 1532:0015 Razer USA, Ltd Bus 004 Device 002: ID 0480:a007 Toshiba America Info. Systems, Inc. lspci -vvv shows that the USB 3.0 host controller is using the kernel driver in use is xhci_hcd. dmesg |grep usb shows: [ 1815.455368] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1815.475459] scsi7 : usb-storage 4-1:1.0 The built in disk utility says its connected via usb at 705 MB/s, but that's not what it reports when I transfer files over to it. Not really sure what to do at this point. Any help would be very nice, thank you.

    Read the article

  • Ubuntu running like mud, system hangs and looks like its running at 3FPS

    - by user240803
    the system specks: AMD XP 3200+ 1GB DDR 333 RAM 160 GB HD IDE NVIDIA FX 5500 AGP Video Card Compaq Presario sr1230nx the system takes forever to boot and when it does it runs like total mud, reminds me of an overloaded system that has too many windows open or something... fresh install tried soo many thing like new memory (it had 512 stick) a new video card (onboard 8mb sis sounded like the problem, but wasn't... has gotten a little faster now but not by much) tried to disable all the things on the motherboard that could be, with no help... this machine runs windows XP, 7, and 8 JUST FINE!!! I mean for a single core CPU WIN8 runs AWESOME!!! BUT I already have a Gaming Desktop that has Windows 8 pro I want a Linux machine to get some time in and learn a few things... I want Ubuntu because of the Software center so I can install things I want until I am familiar with the command line.. I've worked on Computers since I was 12 I remember some of the DOS commands but I guess these are a little different... anyway any ideas? Ive also tried both drivers for the NVIDA card and that didn't help either... its not the card since it did this with both the NVIDA card and the SIS onboard... it also does this on live mode with the USB so I don't think its the HardDrive... I'm running out of options of hardware to try... I know this version of Linux works cuz Ive booted it on other machines and it ran great... what is with this Compaq? here is a vid of exactly what its doing... let me know if you need anything else I am right by the comptuer tonight so ask anything... http://youtu.be/-P-XNo81098

    Read the article

  • Long wait until POST...

    - by Wesley
    Here are the specs to put things into context: ECS P4VXASD2+ (V5.0) motherboard Intel Pentium 4 Northwood 2.8 GHz (512 KB L2, 533 MHz FSB) 2x 512 MB PC2100 DDR266 RAM 128 MB NVIDIA GeForce FX 5200 AGP WD Caviar SE 80 GB IDE HDD Gigabyte CD-RW drive OKIA 300W ATX PSU So, everytime I try to boot up this computer, it takes at least 10-15 seconds before it will POST. All my other machines will post within 1-2 seconds, but this one takes a particularly long time. I've read suggestions from a Google search to swap the CMOS battery, check BIOS settings, and double check CMOS jumper. Still after follow those, it takes a while to POST. What else could be causing a long delay before POSTing?

    Read the article

  • Nvidia driver installation results in resolution change to 800x600 with Xubuntu 10.04 (can't change)

    - by Jim Michael
    I have a 2.8 P4 and a Nvidia FX 5500 AGP graphics card. I've installed Xubuntu 10.04. It is WAY too laggy with the default o/s driver. Installing the Nvidia 173 driver, modaliases and nvidia-settings packages via synaptic package manager results in the following error message: An error occurred, please run Package Manager from the right click menu or apt-get in a terminal to see what is wrong. Error: Opening the cache (E::read, still have 11898251 to read but none left, E: The package lists or status file could not be parsed or opened.) This usually means that your installed packages have unmet dependencies. When restarting the PC the resolution drops to 800x600 (from the monitors native 1440x900). Nvidia settings cannot be changed either from the Xfce menu or Nvidia Xserver. Nvidia Xsever gives the following error message: You do not appear to be using the Nvidia X driver. Please edit your x configuration file (just run 'nvidiaxconfig' as root ) and restart X server. Also, I can't find anything in any directory called xorg.

    Read the article

  • Ubuntu 12.04 LTX Install Problems (See post for system build details.)

    - by Lokitez
    This is my first ever attempt at working with Ubuntu. I have only ever installed Windows in the past and that may be the problem. I purchased all new hardware this week and I would really like to give Ubuntu a chance (especially since I don't want to buy another Windows license). First, the hardware: AMD FX-8150 Zambezi 3.6GHz Socket AM3+ 125W Eight-Core Desktop Processor ASUS Crosshair V Formula AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Gaming Motherboard SAMSUNG 830 Series MZ-7PC128D/AM 2.5" 128GB SATA III MLC Internal Solid State Drive (SSD) - This is my intended boot drive. Western Digital VelociRaptor WD5000HHTZ 500GB 10000 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive - This is a backup drive that I have installed Windows Vista on until I can get Ubuntu to work. G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) ASUS HD7850-DC2-2GD5 Radeon HD 7850 2GB 256-bit GDDR5 PCI Express 3.0 x16 I have downloaded and tried to install both Ubuntu 64 bit and Kubuntu 64 bit (both 12.04). Both will always fail to copy a file during install or otherwise lockup during install to the SSD. I have burned two copies of the Ubuntu 12.04 and had the install fail with both. I have installed Vista onto the HDD. Is it possible to mount the Ubuntu file into

    Read the article

  • Dual displays not working with Xinerama in Ubuntu 12.04

    - by user68489
    I just upgraded from Ubuntu 10.10 to 12.04. I had been using a display configuration just like the one described at http://bitkickers.blogspot.com/2009/08/rotate-just-one-monitor-with.html without any problems under 10.10. I have an nvidia Quadro FX 380 and have upgraded to the latest drivers (295.49). Everything appears to be fine when the system first boots up. However, after logging in, the left screen goes black, and the right screen displays what should be displayed on the left screen. Logging into Ubuntu 2D somewhat improves things. The left screen correctly displays the left portion of the desktop but the right screen contains a duplicate view of the left screen. Turning off Xinerama and enabling TwinView appears to fix the issues but does not allow the right monitor to be rotated. Since the display problems start to occur only after logging on, I thought it might have to do with carryover user configuration from 10.10 but the problems persist even when logging in as a guest. Clicking on System Settings - Displays results in the error message "Could not get screen information - RANDR extension is not present." Any help would be greatly appreciated.

    Read the article

  • Can't boot after compiling 3.1 kernel, can only get to terminal

    - by olssy
    Long story short: I tried compiling kernel 3.1 on Ubuntu 11.10 at the same time I had an update waiting for a reboot. Computer would boot to a black screen and would hang there. Ended up installing 11.10 on top of old install with a Live CD. Now I had a purple screen on bootup but it would end up booting. Realized Grub was the problem and tried some stuff but nothing worked. I ended up trying to install propriety ATI video drivers and since that nothing has worked, no grub menu(purple screen) and when it boots into the kernel it ends up hanging, I can sometimes get a terminal up with alt-fx. I have tried removing the ati drivers with the ati script, purging my fglrx driver, reconfiguring my xconf.org and following any tutorial I can find about fixing a broken graphics driver, but to no avail. I've gotten to a point were it seems that the ati propriety drivers are correctly loaded but it still has no grub boot menu and won't boot into Ubuntu. I've chased down my logs and this line is from kern.log: unity-greeter[3269]: segfault at 0 ip b7245cbbsp bf9d3900 error 4 in libgio-2.0.so.0.3000.0[b71ad000+142000] That line leads me to believe I don'T have the correct libgio-2 librairy on my system but have no idea how to find out what package has the correct version... My xorg.conf has no errors and seems to imply the fglrxdrm module got loaded correctly. Would be a bit complicated pasting the whole file here but if it would help I'll post it. LAstly, running fglrxinfo give me: Error: Unable yo open display (null) Any help or link to another tutorial would be appreciated. Thanks.

    Read the article

  • How do I get my XFX Radeon HD 7870 to work with 3 monitors using HDMI, DVI, and Mini DisplayPort?

    - by user88792
    I bought a XFX Double D FX-787A-CDFC Radeon HD 7870 and set it up using the HDMI, DVI and Mini DisplayPort (using an Apple mDP-to-VGA adapter). I hooked it up, installed the drivers and rebooted. The image came up on the third monitor in a weird resolution. Why did this happen and how can I fix it? I am using Windows 7 Ultimate and the system is completely updated. Side note: When I disconnect the Mini DisplayPort adapter it works fine, however for my work I need 3-4 monitors.

    Read the article

  • DIagnosing another Windows 7 Lockup

    - by MSEoris
    Im running windows 7 on a fairly modern machine (8gb ram, amd fx-6100, gtx 560ti) and I notice that periodically my windows seems to just hang for a little while. Frequently this occurs after a cold boot and i start up five or six small to medium sized programs, but also occasionally it occurs during normal usage. Basically what occurs is the screen locks up, there is no keyboard responsiveness for a period of 30 seconds to a full minute - after a bit of patience, control is returned, but I'm interested in figuring out what is causing such lockups. I checked the event log and dont see any issues, and all i can see in task manager is a spike in cpu and memory usage right after this occurs. Any tips on how to even begin to diagnose this? Thanks.

    Read the article

  • My Computer will not turn on?

    - by user269120
    I recently built a gaming pc. It was working fine before the following events: I installed a graphics card driver update then: in windows it said that the user experience index needed to be refreshed, so i started the test and somewhere in the middle of the test my pc just switched off. No shutting down just stopped. Now it won't turn back on. I have checked its plugged in and the switch on psu is down, i tried a different power cable and i checked all the connections. When i press the power button nothing happens, no fans no lights no post beep. Computer Parts: Motherboard: Gigabyte GA78LMT-USB3 CPU: AMD FX-6350 @ 3.9 Ghz RAM: 2x4gb Crucial Ballistix Sport Power Supply: Tesla 750w psu Graphics card: XFX Radeon 7870 DD Case: CiT Vantage R Gaming Case Hard Drive: 2TB Western Digital Caviar Green Please help me, this computer is only a week old since i built it. All anwsers are appreciated :)

    Read the article

  • Maximize window in one display

    - by P23
    I'm using an NVIDIA Quadra FX 1700 card and have a dual monitor system. I want to maximize a window so that it is maximized in one monitor not across both monitors but I don't seem to have that as an option. Right now I just minimize & expand it so it fills one monitor at a time. Any suggestions? I'm using Windows XP Professional on a desktop. Maybe it's not possible since it seems that both monitors are connected to the graphics card and Windows only sees one monitor.

    Read the article

  • How can I center XHTML content with CSS?

    - by drea
    so I recently converted a website of mine from a table content format to a div content format. Table format Version: Table version of the website: here. Table version style CSS: body { width: 1020px; margin: 0 auto; background-image: url(images/bg.png); } .logo{ width:301px; height:151px; background:url(images/logo.png); text-indent:-9999px; border:none; cursor:pointer; } .logo:hover { opacity:0.9; } .signin{ width:69px; height:30px; background:url(images/signin.png); text-indent:-9999px; border:none; cursor:pointer; } .signin:hover { opacity:0.9; } .register{ width:79px; height:30px; background:url(images/register.png); text-indent:-9999px; border:none; cursor:pointer; } .register:hover { opacity:0.9; } .Contact_Us{ width:53px; height:9px; background:url(images/Contact_Us.png); text-indent:-9999px; border:none; cursor:pointer; } .Contact_Us:hover { opacity:0.9; } .Code_of_Conduct{ width:84px; height:9px; background:url(images/Code_of_Conduct.png); text-indent:-9999px; border:none; cursor:pointer; } .Code_of_Conduct:hover { opacity:0.9; } .Privacy_Policy{ width:65px; height:12px; background:url(images/Privacy_Policy.png); text-indent:-9999px; border:none; cursor:pointer; } .Privacy_Policy:hover { opacity:0.9; } .Copyright{ width:149px; height:9px; background:url(images/Copyright.png); text-indent:-9999px; border:none; cursor:pointer; } .Copyright:hover { opacity:0.9; } .slideshow{ width:301px; height:151px; background: url(slideshow.png), url(minecraft.png), url(tf2.png), url(CSS.png), url(GM.png), url(aos.png), url(CSGO.png), url(voip.png), text-indent:-9999px; border:none; cursor:pointer; } .slideshow:hover { opacity:0.9; } Table version source: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head profile="http://www.w3.org/2005/10/profile"> <link rel="icon" type="image/png" href="http://www.xodusen.com/resources/images/favicon.png"> <title>Welcome to XodusEN</title> <script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.8.0/jquery.min.js"></script> <script type="text/javascript" src="http://cloud.github.com/downloads/malsup/cycle/jquery.cycle.all.latest.js"></script> <script type="text/javascript"> $(document).ready(function() { $('.slideshow').cycle({ fx: 'fade' // choose your transition type, ex: fade, scrollUp, shuffle, etc... }); }); </script> <meta name="description" content="This is the homepage of XodusEN. Xodus Entertainment Network is a unique & friendly Gaming Community that welcomes & realises the potential, and value within any user regardless of their origin. " > <meta name="keywords" content="XeN, Xodus, XEN, xen, Xodus Entertainment Network, gaming, community, PC, Steam, XBL, Xbox 360, PSN, Playstation, games, Gaming, Community, XodusEN, Gaming Network, Network, TF2, Server, CS:S, Minecraft, premium, servers, Counter-Strike: Source, Website, Homepage, Minecraftia" > <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> <link href="style.css" rel="stylesheet" type="text/css"> <!--[if IE]> <script type="text/javascript"> window.location = "http://www.xodusen.com/ie/"; </script> <![endif]--> </head> <body bgcolor="#d7d7d7"> <table id="Table_01" border="0" cellpadding="0" cellspacing="0"> <tr> <td colspan="18"> <img src="images/index_01.png" width="1020" height="9" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="9" alt=""></td> </tr> <tr> <td colspan="11" rowspan="2"> <img src="images/index_02.png" width="826" height="252" alt=""></td> <td> <a id="signin" class="signin" href="http://s.xodusen.com/VrtqYm"> <img src="images/signin.png" width="69" height="30" border="0" alt=""></a> <td rowspan="6"> <img src="images/index_04.png" width="3" height="643" alt=""></td> <td colspan="3"> <a id="register" class="register" href="http://s.xodusen.com/WW3rpZ"> <img src="images/Register.png" width="79" height="30" border="0" alt=""></a> <td colspan="2" rowspan="6"> <img src="images/index_06.png" width="43" height="643" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="30" alt=""></td> </tr> <tr> <td rowspan="5"> <img src="images/index_07.png" width="69" height="613" alt=""></td> <td colspan="3" rowspan="5"> <img src="images/index_08.png" width="79" height="613" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="222" alt=""></td> </tr> <tr> <td colspan="5"> <img src="images/index_09.png" width="385" height="53" alt=""></td> <td> <img src="images/index_10.png" width="250" height="53" alt=""></td> <td colspan="5"> <img src="images/index_11.png" width="191" height="53" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="53" alt=""></td> </tr> <tr> <td colspan="4" rowspan="3"> <img src="images/index_09-13.png" width="360" height="338" alt=""></td> <td colspan="3"> <a id="logo" class="logo" href="http://www.xodusen.com/community"> <img src="images/logo.png" alt=""></a> </td> <td colspan="4" rowspan="3"> <img src="images/index_11-15.png" width="165" height="338" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="151" alt=""></td> </tr> <tr> <td rowspan="2"> <img src="images/index_09-16.png" width="25" height="187" alt=""></td> <td> <img src="images/index_16.png" width="250" height="46" alt=""></td> <td rowspan="2"> <img src="images/index_11-18.png" width="26" height="187" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="46" alt=""></td> </tr> <tr> <td> <img src="images/index_12.png" width="250" height="141" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="141" alt=""></td> </tr> <tr> <td rowspan="7"> <img src="images/index_13.png" width="27" height="548" alt=""></td> <td colspan="16" id="slideshow" class="slideshow"> <a href="http://www.xodusen.com/community"><img src="images/slideshow.png" width="960" height="305" alt=""></a> <a href="http://www.xodusen.com/mcurl"><img src="images/minecraft.png" width="960" height="305" alt=""></a> <a href="steam://connect/74.121.188.194:27015"><img src="images/tf2.png" width="960" height="305" alt=""></a> <a href="steam://connect/74.121.188.195:27015"><img src="images/CSS.png" width="960" height="305" alt=""></a> <a href="steam://connect/74.121.188.197:27015"><img src="images/GM.png" width="960" height="305" alt=""></a> <a href="aos://3267131722:32887"><img src="images/aos.png" width="960" height="305" alt=""></a> <a href="steam://connect/74.121.188.196:27015"><img src="images/CSGO.png" width="960" height="305" alt=""></a></td> <td rowspan="7"> <img src="images/index_15.png" width="33" height="548" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="305" alt=""></td> </tr> <tr> <td colspan="16"> <img src="images/index_16-23.png" width="960" height="155" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="155" alt=""></td> </tr> <tr> <td rowspan="5"> <img src="images/index_17.png" width="38" height="88" alt=""></td> <td rowspan="2"> <a id="Copyright" class="Copyright" href="http://www.xodusen.com/community"> <img src="images/Copyright.png" width="149" height="9" border="0" alt=""></a></td> <td colspan="14"> <img src="images/index_25.png" width="773" height="5" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="5" alt=""></td> </tr> <tr> <td colspan="5" rowspan="4"> <img src="images/index_20.png" width="527" height="83" alt=""></td> <td rowspan="3"> <a id="Privacy_Policy" class="Privacy_Policy" href="http://s.xodusen.com/VhGEkH"> <img src="images/Privacy_Policy.png" width="65" height="12" border="0" alt=""></a></td> <td rowspan="4"> <img src="images/index_28.png" width="8" height="83" alt=""></td> <td colspan="3" rowspan="2"> <a id="Code_of_Conduct" class="Code_of_Conduct" href="http://s.xodusen.com/Tf5Gz7"> <img src="images/Code_of_Conduct.png" width="84" height="9" border="0" alt=""></a></td> <td rowspan="4"> <img src="images/index_30.png" width="6" height="83" alt=""></td> <td rowspan="2"> <a id="Contact_Us" class="Contact_Us" href="http://s.xodusen.com/T5EYsG"> <img src="images/Contact_Us.png" width="53" height="9" border="0" alt=""></a></td> <td colspan="2" rowspan="4"> <img src="images/index_26.png" width="30" height="83" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="4" alt=""></td> </tr> <tr> <td rowspan="3"> <img src="images/index_27.png" width="149" height="79" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="5" alt=""></td> </tr> <tr> <td colspan="3" rowspan="2"> <img src="images/index_28-35.png" width="84" height="74" alt=""></td> <td rowspan="2"> <img src="images/index_29.png" width="53" height="74" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="3" alt=""></td> </tr> <tr> <td> <img src="images/index_30-37.png" width="65" height="71" alt=""></td> <td> <img src="images/spacer.gif" width="1" height="71" alt=""></td> </tr> <tr> <td> <img src="images/spacer.gif" width="27" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="38" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="149" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="146" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="25" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="250" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="26" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="80" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="65" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="8" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="12" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="69" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="3" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="6" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="53" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="20" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="10" height="1" alt=""></td> <td> <img src="images/spacer.gif" width="33" height="1" alt=""></td> <td></td> </tr> </table> </body> </html> Div format Version: Div version of the website: here. Div version style CSS: body { width: 1020px; margin: 0 auto; background-image: url(images/bg.png); } #Table_01 { position:absolute; left:0px; top:0px; width:1020px; height:1200px; } #index-01_ { position:absolute; left:0px; top:0px; width:1020px; height:9px; } #index-02_ { position:absolute; left:0px; top:9px; width:826px; height:305px; } #Signin_ { position:absolute; left:826px; top:9px; width:69px; height:30px; } #index-04_ { position:absolute; left:895px; top:9px; width:3px; height:643px; } #Register_ { position:absolute; left:898px; top:9px; width:79px; height:30px; } #index-06_ { position:absolute; left:977px; top:9px; width:43px; height:643px; } #index-07_ { position:absolute; left:826px; top:39px; width:69px; height:613px; } #index-08_ { position:absolute; left:898px; top:39px; width:79px; height:613px; } #index-09_ { position:absolute; left:0px; top:314px; width:360px; height:338px; } #Logo_ { position:absolute; left:360px; top:314px; width:301px; height:151px; } #index-11_ { position:absolute; left:661px; top:314px; width:165px; height:338px; } #index-12_ { position:absolute; left:360px; top:465px; width:301px; height:187px; } #index-13_ { position:absolute; left:0px; top:652px; width:27px; height:548px; } #Slideshow_ { position:absolute; left:27px; top:652px; width:960px; height:305px; } #index-15_ { position:absolute; left:987px; top:652px; width:33px; height:548px; } #index-16_ { position:absolute; left:27px; top:957px; width:960px; height:155px; } #index-17_ { position:absolute; left:27px; top:1112px; width:39px; height:88px; } #Copyright_ { position:absolute; left:66px; top:1112px; width:148px; height:13px; } #index-19_ { position:absolute; left:214px; top:1112px; width:773px; height:5px; } #index-20_ { position:absolute; left:214px; top:1117px; width:526px; height:83px; } #Privacy-Policy_ { position:absolute; left:740px; top:1117px; width:68px; height:23px; } #index-22_ { position:absolute; left:808px; top:1117px; width:6px; height:83px; } #Code-of-Conduct_ { position:absolute; left:814px; top:1117px; width:84px; height:23px; } #index-24_ { position:absolute; left:898px; top:1117px; width:2px; height:83px; } #Contact-Us_ { position:absolute; left:900px; top:1117px; width:57px; height:23px; } #index-26_ { position:absolute; left:957px; top:1117px; width:30px; height:83px; } #index-27_ { position:absolute; left:66px; top:1125px; width:148px; height:75px; } #index-28_ { position:absolute; left:740px; top:1140px; width:68px; height:60px; } #index-29_ { position:absolute; left:814px; top:1140px; width:84px; height:60px; } #index-30_ { position:absolute; left:900px; top:1140px; width:57px; height:60px; } .logo{ width:301px; height:151px; background:url(images/logo.png); text-indent:-9999px; border:none; cursor:pointer; } .logo:hover { opacity:0.9; } .signin{ width:69px; height:30px; background:url(images/signin.png); text-indent:-9999px; border:none; cursor:pointer; } .signin:hover { opacity:0.9; } .register{ width:79px; height:30px; background:url(images/register.png); text-indent:-9999px; border:none; cursor:pointer; } .register:hover { opacity:0.9; } .contact_Us{ width:53px; height:9px; background:url(images/Contact_Us.png); text-indent:-9999px; border:none; cursor:pointer; } .contact_Us:hover { opacity:0.9; } .code_of_Conduct{ width:84px; height:9px; background:url(images/Code_of_Conduct.png); text-indent:-9999px; border:none; cursor:pointer; } .code_of_Conduct:hover { opacity:0.9; } .privacy_policy{ width:65px; height:12px; background:url(images/Privacy_Policy.png); text-indent:-9999px; border:none; cursor:pointer; } .privacy_policy:hover { opacity:0.9; } .copyright{ width:148px; height:13px; background:url(images/Copyright.png); text-indent:-9999px; border:none; cursor:pointer; } .copyright:hover { opacity:0.9; } .slideshow{ width:301px; height:151px; background: url(slideshow.png), url(minecraft.png), url(tf2.png), url(CSS.png), url(GM.png), url(aos.png), url(CSGO.png), url(voip.png), text-indent:-9999px; border:none; cursor:pointer; } .slideshow:hover { opacity:0.9; } Div version source: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <script type="text/javascript"> //<![CDATA[ window.__CF=window.__CF||{};window.__CF.AJS={"vig_key":{"sid":"c6d1454039dd49b1c8400bbfdf74df7a"},"trumpet":{"message":"XodusEN is undergoing background maintenance, that will provide performance & graphical improvements to our system, but will not hinder your experience across our services."},"ga_key":{"ua":"UA-35779435-1","ga_bs":"2"},"exprmntly":{"service_id":"7967"},"cdnjs":{"__h":"1","cdnjs":"MO,GF,FX,CS,JS"},"abetterbrowser":{"ie":"10"}}; //]]> </script> <script type="text/javascript"> //<![CDATA[ try{if (!window.CloudFlare) { var CloudFlare=[{verbose:0,p:0,byc:0,owlid:"cf",mirage:{responsive:0,lazy:0},oracle:0,paths:{cloudflare:"/cdn-cgi/nexp/aav=1870252173/"},atok:"d6e39f49946fcb6d690f0d10d5a963f3",zone:"xodusen.com",rocket:"a",apps:{"vig_key":{"sid":"c6d1454039dd49b1c8400bbfdf74df7a"},"trumpet":{"message":"XodusEN is undergoing background maintenance, that will provide performance & graphical improvements to our system, but will not hinder your experience across our services."},"ga_key":{"ua":"UA-35779435-1","ga_bs":"2"},"exprmntly":{"service_id":"7967"},"cdnjs":{"__h":"1","cdnjs":"MO,GF,FX,CS,JS"},"abetterbrowser":{"ie":"10"}}}];document.write('<script type="text/javascript" src="//ajax.cloudflare.com/cdn-cgi/nexp/aav=4114775854/cloudflare.min.js"><'+'\/script>')}}catch(e){}; //]]> </script> <script type="text/javascript" src="//ajax.cloudflare.com/cdn-cgi/nexp/aav=1566821048/appsh.min.js"></script><script type="text/javascript">__CF.AJS.inith();</script><link rel="icon" type="image/png" href="http://www.xodusen.com/resources/images/favicon.png"> <title>Welcome to XodusEN</title> <meta name="description" content="This is the homepage of XodusEN. Xodus Entertainment Network is a unique & friendly Gaming Community that welcomes & realises the potential, and value within any user regardless of their origin. "> <meta name="keywords" content="XeN, Xodus, XEN, xen, Xodus Entertainment Network, gaming, community, PC, Steam, XBL, Xbox 360, PSN, Playstation, games, Gaming, Community, XodusEN, Gaming Network, Network, TF2, Server, CS:S, Minecraft, premium, servers, Counter-Strike: Source, Website, Homepage, Minecraftia"> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/> <link href="style.css" rel="stylesheet" type="text/css"> <script type="text/rocketscript" data-rocketsrc="https://ajax.googleapis.com/ajax/libs/jquery/1.8.0/jquery.min.js"></script> <script type="text/rocketscript" data-rocketsrc="http://cloud.github.com/downloads/malsup/cycle/jquery.cycle.all.latest.js"></script> <script type="text/rocketscript"> $(document).ready(function() { $('.slideshow').cycle({ fx: 'fade' // choose your transition type, ex: fade, scrollUp, shuffle, etc... }); }); </script> <!--[if IE]> <script type="text/javascript"> window.location = "http://www.xodusen.com/ie/"; </script> <![endif]--> <script type="text/javascript"> /* <![CDATA[ */ var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-35779435-1']); _gaq.push(['_trackPageview']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); (function(b){(function(a){"__CF"in b&&"DJS"in b.__CF?b.__CF.DJS.push(a):"addEventListener"in b?b.addEventListener("load",a,!1):b.attachEvent("onload",a)})(function(){"FB"in b&&"Event"in FB&&"subscribe"in FB.Event&&(FB.Event.subscribe("edge.create",function(a){_gaq.push(["_trackSocial","facebook","like",a])}),FB.Event.subscribe("edge.remove",function(a){_gaq.push(["_trackSocial","facebook","unlike",a])}),FB.Event.subscribe("message.send",function(a){_gaq.push(["_trackSocial","facebook","send",a])}));"twttr"in b&&"events"in twttr&&"bind"in twttr.events&&twttr.events.bind("tweet",function(a){if(a){var b;if(a.target&&a.target.nodeName=="IFRAME")a:{if(a=a.target.src){a=a.split("#")[0].match(/[^?=&]+=([^&]*)?/g);b=0;for(var c;c=a[b];++b)if(c.indexOf("url")===0){b=unescape(c.split("=")[1]);break a}}b=void 0}_gaq.push(["_trackSocial","twitter","tweet",b])}})})})(window); /* ]]> */ </script> <meta name="pinterest" content="nopin"/></head> <body style="background-color:#d7d7d7;"><script type="text/javascript"> //<![CDATA[ try{(function(a){var b="http://",c="www.xodusen.com",d="/cdn-cgi/cl/",e="618e40fe1e01787d9cb9aa2f8abc52caf8a32796.gif",f=new a;f.src=[b,c,d,e].join("")})(Image)}catch(e){} //]]> </script> <div id="Table_01"> <div id="index-01_"> <img id="index_01" src="images/index_01.png" width="1020" height="9" alt=""/> </div> <div id="index-02_"> <img id="index_02" src="images/index_02.png" width="826" height="305" alt=""/> </div> <div id="Signin_"> <a href="http://s.xodusen.com/VrtqYm"> <img id="Signin" class="signin" src="images/Signin.png" width="69" height="30" border="0" alt=""/></a> </div> <div id="index-04_"> <img id="index_04" src="images/index_04.png" width="3" height="643" alt=""/> </div> <div id="Register_"> <a href="http://s.xodusen.com/WW3rpZ"> <img id="Register" class="register" src="images/Register.png" width="79" height="30" alt=""/></a> </div> <div id="index-06_"> <img id="index_06" src="images/index_06.png" width="43" height="643" alt=""/> </div> <div id="index-07_"> <img id="index_07" src="images/index_07.png" width="69" height="613" alt=""/> </div> <div id="index-08_"> <img id="index_08" src="images/index_08.png" width="79" height="613" alt=""/> </div> <div id="index-09_"> <img id="index_09" src="images/index_09.png" width="360" height="338" alt=""/> </div> <div id="Logo_"> <a href="http://s.xodusen.com/WW3rpZ"> <img class="logo" src="images/Logo.png" width="301" height="151" alt=""></a> </div> <div id="index-11_"> <img id="index_11" src="images/index_11.png" width="165" height="338" alt=""/> </div> <div id="index-12_"> <img id="index_12" src="images/index_12.png" width="301" height="187" alt=""/> </div> <div id="index-13_"> <img id="index_13" src="images/index_13.png" width="27" height="548" alt=""/> </div> <div id="Slideshow_" class="slideshow"> <a href="http://www.xodusen.com/community"> <img src="images/slideshow.png" width="960" height="305" alt=""></a> <a href="http://www.xodusen.com/mcurl"> <img src="images/minecraft.png" width="960" height="305" alt=""></a> <a href="steam://connect/74.121.188.194:27015"> <img src="images/tf2.png" width="960" height="305" alt=""></a> <a href="steam://connect/74.121.188.195:27015"> <img src="images/CSS.png" width="960" height="305" alt=""></a> <a href="steam://connect/74.121.188.197:27015"> <img src="images/GM.png" width="960" height="305" alt=""></a> <a href="aos://3267131722:32887"> <img src="images/aos.png" width="960" height="305" alt=""></a> <a href="steam://connect/74.121.188.196:27015"> <img src="images/CSGO.png" width="960" height="305" alt=""></a> </div> <div id="index-15_"> <img id="index_15" src="images/index_15.png" width="33" height="548" alt=""/> </div> <div id="index-16_"> <img id="index_16" src="images/index_16.png" width="960" height="155" alt=""/> </div> <div id="index-17_"> <img id="index_17" src="images/index_17.png" width="39" height="88" alt=""/> </div> <div id="Copyright_"> <a href="http://www.xodusen.com/community"> <img id="Copyright" src="images/Copyright.png" width="148" height="13" alt=""></a> </div> <div id="index-19_"> <img id="index_19" src="images/index_19.png" width="773" height="5" alt=""/> </div> <div id="index-20_"> <img id="index_20" src="images/index_20.png" width="526" height="83" alt=""/> </div> <div id="Privacy-Policy_"> <a href="http://s.xodusen.com/VhGEkH"> <img id="Privacy_Policy" src="images/Privacy_Policy.png" width="68" height="23" alt=""></a> </div> <div id="index-22_"> <img id="index_22" src="images/index_22.png" width="6" height="83" alt=""/> </div> <div id="Code-of-Conduct_"> <a href="http://s.xodusen.com/Tf5Gz7"> <img id="Code_of_Conduct" src="images/Code_of_Conduct.png" width="84" height="23" alt=""></a> </div> <div id="index-24_"> <img id="index_24" src="images/index_24.png" width="2" height="83" alt=""/> </div> <div id="Contact-Us_"> <a href="http://s.xodusen.com/T5EYsG"> <img id="Contact_Us" src="images/Contact_Us.png" width="57" height="23" alt=""></a> </div> <div id="index-26_"> <img id="index_26" src="images/index_26.png" width="30" height="83" alt=""/> </div> <div id="index-27_"> <img id="index_27" src="images/index_27.png" width="148" height="75" alt=""/> </div> <div id="index-28_"> <img id="index_28" src="images/index_28.png" width="68" height="60" alt=""/> </div> <div id="index-29_"> <img id="index_29" src="images/index_29.png" width="84" height="60" alt=""/> </div> <div id="index-30_"> <img id="index_30" src="images/index_30.png" width="57" height="60" alt=""/> </div> </div> <script type="text/javascript" src="//ajax.cloudflare.com/cdn-cgi/nexp/aav=4188748942/apps1.min.js"></script><script type="text/javascript">__CF.AJS.init1();</script></body> </html> My issue is, how can I achieve the same 'centered' results in the div format of the website, as the table format of the website? I have done some research to no avail, so I'd thought given the reputation of this site, that i'd post my issue here. Thank you in advance, ~ drea.

    Read the article

  • REST web service keeps first POST parametrs

    - by Diego
    I have a web service in REST, designed with Java and deployed on Tomcat. This is the web service structure: @Path("Personas") public class Personas { @Context private UriInfo context; /** * Creates a new instance of ServiceResource */ public Personas() { } @GET @Produces("text/html") public String consultarEdad (@QueryParam("nombre") String nombre) { ConectorCliente c = new ConectorCliente("root", "cafe.sql", "test"); int edad = c.consultarEdad(nombre); if (edad == Integer.MIN_VALUE) return "-1"; return String.valueOf(edad); } @POST @Produces("text/html") public String insertarPersona(@QueryParam("nombre") String msg, @QueryParam("edad") int edad) { ConectorCliente c = new ConectorCliente("usr", "passwd", "dbname"); c.agregar(msg, edad); return "listo"; } } Where ConectorCliente class is MySQL connector and querying class. So, I had tested this with the @GET actually doing POST work, any user inputed data and information from ma Java FX app and it went direct to webservice's database. However, I changed so the CREATE operation was performed through a webservice responding to an actual POST HTTP request. However, when I run the client and add some info, parameters go OK, but in next time I input different parameters it'll input the same. I run this several times and I can't get the reason of it. This is the clients code: public class WebServicePersonasConsumer { private WebTarget webTarget; private Client client; private static final String BASE_URI = "http://localhost:8080/GetSomeRest/serviciosweb/"; public WebServicePersonasConsumer() { client = javax.ws.rs.client.ClientBuilder.newClient(); webTarget = client.target(BASE_URI).path("Personas"); } public <T> T insertarPersona(Class<T> responseType, String nombre, String edad) throws ClientErrorException { String[] queryParamNames = new String[]{"nombre", "edad"}; String[] queryParamValues = new String[]{nombre, edad}; ; javax.ws.rs.core.Form form = getQueryOrFormParams(queryParamNames, queryParamValues); javax.ws.rs.core.MultivaluedMap<String, String> map = form.asMap(); for (java.util.Map.Entry<String, java.util.List<String>> entry : map.entrySet()) { java.util.List<String> list = entry.getValue(); String[] values = list.toArray(new String[list.size()]); webTarget = webTarget.queryParam(entry.getKey(), (Object[]) values); } return webTarget.request().post(null, responseType); } public <T> T consultarEdad(Class<T> responseType, String nombre) throws ClientErrorException { String[] queryParamNames = new String[]{"nombre"}; String[] queryParamValues = new String[]{nombre}; ; javax.ws.rs.core.Form form = getQueryOrFormParams(queryParamNames, queryParamValues); javax.ws.rs.core.MultivaluedMap<String, String> map = form.asMap(); for (java.util.Map.Entry<String, java.util.List<String>> entry : map.entrySet()) { java.util.List<String> list = entry.getValue(); String[] values = list.toArray(new String[list.size()]); webTarget = webTarget.queryParam(entry.getKey(), (Object[]) values); } return webTarget.request(javax.ws.rs.core.MediaType.TEXT_HTML).get(responseType); } private Form getQueryOrFormParams(String[] paramNames, String[] paramValues) { Form form = new javax.ws.rs.core.Form(); for (int i = 0; i < paramNames.length; i++) { if (paramValues[i] != null) { form = form.param(paramNames[i], paramValues[i]); } } return form; } public void close() { client.close(); } } And this this the code when I perform the operations in a Java FX app: String nombre = nombreTextField.getText(); String edad = edadTextField.getText(); String insertToDatabase = consumidor.insertarPersona(String.class, nombre, edad); So, as parameters are taken from TextFields, is quite odd why second, third, fourth and so on POSTS post the SAME.

    Read the article

  • [Qt/C++] Need help in optimizing a drawing code ...

    - by Ahmad
    Hello all ... I needed some help in trying to optimize this code portion ... Basically here's the thing .. I'm making this 'calligraphy pen' which gives the calligraphy effect by simply drawing a lot of adjacent slanted lines ... The problem is this: When I update the draw region using update() after every single draw of a slanted line, the output is correct, in the sense that updates are done in a timely manner, so that everything 'drawn' using the pen is immediately 'seen' the drawing.. however, because a lot (100s of them) of updates are done, the program slows down a little when run on the N900 ... When I try to do a little optimization by running update after drawing all the slanted lines (so that all lines are updated onto the drawing board through a single update() ), the output is ... odd .... That is, immediately after drawing the lines, they lines seem broken (they have vacant patches where the drawing should have happened as well) ... however, if I trigger a redrawing of the form window (say, by changing the size of the form), the broken patches are immediately fixed !! When I run this program on my N900, it gets the initial broken output and stays like that, since I don't know how to enforce a redraw in this case ... Here is the first 'optimized' code and output (partially correct/incorrect) void Canvas::drawLineTo(const QPoint &endPoint) { QPainter painter(&image); painter.setPen(QPen(Qt::black,1,Qt::SolidLine,Qt::RoundCap,Qt::RoundJoin)); int fx=0,fy=0,k=0; qPoints.clear(); connectingPointsCalculator2(qPoints,lastPoint.x(),lastPoint.y(),endPoint.x(),endPoint.y()); int i=0; int x,y; for(i=0;i<qPoints.size();i++) { x=qPoints.at(i).x(); y=qPoints.at(i).y(); painter.setPen(Qt::black); painter.drawLine(x-5,y-5,x+5,y+5); **// Drawing slanted lines** } **//Updating only once after many draws:** update (QRect(QPoint(lastPoint.x()-5,lastPoint.y()-5), QPoint(endPoint.x()+5,endPoint.y()+5)).normalized()); modified = true; lastPoint = endPoint; } Image right after scribbling on screen: http://img823.imageshack.us/img823/8755/59943912.png After re-adjusting the window size, all the broken links above are fixed like they should be .. Here is the second un-optimized code (its output is correct right after drawing, just like in the second picture above): void Canvas::drawLineTo(const QPoint &endPoint) { QPainter painter(&image); painter.setPen(QPen(Qt::black,1,Qt::SolidLine,Qt::RoundCap,Qt::RoundJoin)); int fx=0,fy=0,k=0; qPoints.clear(); connectingPointsCalculator2(qPoints,lastPoint.x(),lastPoint.y(),endPoint.x(),endPoint.y()); int i=0; int x,y; for(i=0;i<qPoints.size();i++) { x=qPoints.at(i).x(); y=qPoints.at(i).y(); painter.setPen(Qt::black); painter.drawLine(x-5,y-5,x+5,y+5); **// Drawing slanted lines** **//Updating repeatedly during the for loop:** update(QRect(QPoint(x-5,y-5), QPoint(x+5,y+5)).normalized());//.adjusted(-rad,-rad,rad,rad)); } modified = true; int rad = (myPenWidth / 2) + 2; lastPoint = endPoint; } Can anyone see what the issue might be ?

    Read the article

  • Issues with HLSL and lighting

    - by numerical25
    I am trying figure out whats going on with my HLSL code but I have no way of debugging it cause C++ gives off no errors. The application just closes when I run it. I am trying to add lighting to a 3d plane I made. below is my HLSL. The problem consist when my Pixel shader method returns the struct "outColor" . If I change the return value back to the struct "psInput" , everything goes back to working again. My light vectors and colors are at the top of the fx file // PS_INPUT - input variables to the pixel shader // This struct is created and fill in by the // vertex shader cbuffer Variables { matrix Projection; matrix World; float TimeStep; }; struct PS_INPUT { float4 Pos : SV_POSITION; float4 Color : COLOR0; float3 Normal : TEXCOORD0; float3 ViewVector : TEXCOORD1; }; float specpower = 80.0f; float3 camPos = float3(0.0f, 9.0, -256.0f); float3 DirectLightColor = float3(1.0f, 1.0f, 1.0f); float3 DirectLightVector = float3(0.0f, 0.602f, 0.70f); float3 AmbientLightColor = float3(1.0f, 1.0f, 1.0f); /*************************************** * Lighting functions ***************************************/ /********************************* * CalculateAmbient - * inputs - * vKa material's reflective color * lightColor - the ambient color of the lightsource * output - ambient color *********************************/ float3 CalculateAmbient(float3 vKa, float3 lightColor) { float3 vAmbient = vKa * lightColor; return vAmbient; } /********************************* * CalculateDiffuse - * inputs - * material color * The color of the direct light * the local normal * the vector of the direct light * output - difuse color *********************************/ float3 CalculateDiffuse(float3 baseColor, float3 lightColor, float3 normal, float3 lightVector) { float3 vDiffuse = baseColor * lightColor * saturate(dot(normal, lightVector)); return vDiffuse; } /********************************* * CalculateSpecular - * inputs - * viewVector * the direct light vector * the normal * output - specular highlight *********************************/ float CalculateSpecular(float3 viewVector, float3 lightVector, float3 normal) { float3 vReflect = reflect(lightVector, normal); float fSpecular = saturate(dot(vReflect, viewVector)); fSpecular = pow(fSpecular, specpower); return fSpecular; } /********************************* * LightingCombine - * inputs - * ambient component * diffuse component * specualr component * output - phong color color *********************************/ float3 LightingCombine(float3 vAmbient, float3 vDiffuse, float fSpecular) { float3 vCombined = vAmbient + vDiffuse + fSpecular.xxx; return vCombined; } //////////////////////////////////////////////// // Vertex Shader - Main Function /////////////////////////////////////////////// PS_INPUT VS(float4 Pos : POSITION, float4 Color : COLOR, float3 Normal : NORMAL) { PS_INPUT psInput; float4 newPosition; newPosition = Pos; newPosition.y = sin((newPosition.x * TimeStep) + (newPosition.z / 3.0f)) * 5.0f; // Pass through both the position and the color psInput.Pos = mul(newPosition , Projection ); psInput.Color = Color; psInput.ViewVector = normalize(camPos - psInput.Pos); return psInput; } /////////////////////////////////////////////// // Pixel Shader /////////////////////////////////////////////// //Anthony!!!!!!!!!!! Find out how color works when multiplying them float4 PS(PS_INPUT psInput) : SV_Target { float3 normal = -normalize(psInput.Normal); float3 vAmbient = CalculateAmbient(psInput.Color, AmbientLightColor); float3 vDiffuse = CalculateDiffuse(psInput.Color, DirectLightColor, normal, DirectLightVector); float fSpecular = CalculateSpecular(psInput.ViewVector, DirectLightVector, normal); float4 outColor; outColor.rgb = LightingCombine(vAmbient, vDiffuse, fSpecular); outColor.a = 1.0f; //Below is where the error begins return outColor; } // Define the technique technique10 Render { pass P0 { SetVertexShader( CompileShader( vs_4_0, VS() ) ); SetGeometryShader( NULL ); SetPixelShader( CompileShader( ps_4_0, PS() ) ); } } Below is some of my c++ code. Reason I am showing this is because it is pretty much what creates the surface normals for my shaders to evaluate. for the lighting for(int z=0; z < NUM_ROWS; ++z) { for(int x = 0; x < NUM_COLS; ++x) { int curVertex = x + (z * NUM_VERTSX); indices[curIndex] = curVertex; indices[curIndex + 1] = curVertex + NUM_VERTSX; indices[curIndex + 2] = curVertex + 1; D3DXVECTOR3 v0 = vertices[indices[curIndex]].pos; D3DXVECTOR3 v1 = vertices[indices[curIndex + 1]].pos; D3DXVECTOR3 v2 = vertices[indices[curIndex + 2]].pos; D3DXVECTOR3 normal; D3DXVECTOR3 cross; D3DXVec3Cross(&cross, &D3DXVECTOR3(v2 - v0),&D3DXVECTOR3(v1 - v0)); D3DXVec3Normalize(&normal, &cross); vertices[indices[curIndex]].normal = normal; vertices[indices[curIndex + 1]].normal = normal; vertices[indices[curIndex + 2]].normal = normal; indices[curIndex + 3] = curVertex + 1; indices[curIndex + 4] = curVertex + NUM_VERTSX; indices[curIndex + 5] = curVertex + NUM_VERTSX + 1; v0 = vertices[indices[curIndex + 3]].pos; v1 = vertices[indices[curIndex + 4]].pos; v2 = vertices[indices[curIndex + 5]].pos; D3DXVec3Cross(&cross, &D3DXVECTOR3(v2 - v0),&D3DXVECTOR3(v1 - v0)); D3DXVec3Normalize(&normal, &cross); vertices[indices[curIndex + 3]].normal = normal; vertices[indices[curIndex + 4]].normal = normal; vertices[indices[curIndex + 5]].normal = normal; curIndex += 6; } } and below is my c++ code, in it's entirety. showing the drawing and also calling on the passes #include "MyGame.h" //#include "CubeVector.h" /* This code sets a projection and shows a turning cube. What has been added is the project, rotation and a rasterizer to change the rasterization of the cube. The issue that was going on was something with the effect file which was causing the vertices not to be rendered correctly.*/ typedef struct { ID3D10Effect* pEffect; ID3D10EffectTechnique* pTechnique; //vertex information ID3D10Buffer* pVertexBuffer; ID3D10Buffer* pIndicesBuffer; ID3D10InputLayout* pVertexLayout; UINT numVertices; UINT numIndices; }ModelObject; ModelObject modelObject; // World Matrix D3DXMATRIX WorldMatrix; // View Matrix D3DXMATRIX ViewMatrix; // Projection Matrix D3DXMATRIX ProjectionMatrix; ID3D10EffectMatrixVariable* pProjectionMatrixVariable = NULL; //grid information #define NUM_COLS 16 #define NUM_ROWS 16 #define CELL_WIDTH 32 #define CELL_HEIGHT 32 #define NUM_VERTSX (NUM_COLS + 1) #define NUM_VERTSY (NUM_ROWS + 1) // timer variables LARGE_INTEGER timeStart; LARGE_INTEGER timeEnd; LARGE_INTEGER timerFreq; double currentTime; float anim_rate; // Variable to hold how long since last frame change float lastElaspedFrame = 0; // How long should the frames last float frameDuration = 0.5; bool MyGame::InitDirect3D() { if(!DX3dApp::InitDirect3D()) { return false; } // Get the timer frequency QueryPerformanceFrequency(&timerFreq); float freqSeconds = 1.0f / timerFreq.QuadPart; lastElaspedFrame = 0; D3D10_RASTERIZER_DESC rastDesc; rastDesc.FillMode = D3D10_FILL_WIREFRAME; rastDesc.CullMode = D3D10_CULL_FRONT; rastDesc.FrontCounterClockwise = true; rastDesc.DepthBias = false; rastDesc.DepthBiasClamp = 0; rastDesc.SlopeScaledDepthBias = 0; rastDesc.DepthClipEnable = false; rastDesc.ScissorEnable = false; rastDesc.MultisampleEnable = false; rastDesc.AntialiasedLineEnable = false; ID3D10RasterizerState *g_pRasterizerState; mpD3DDevice->CreateRasterizerState(&rastDesc, &g_pRasterizerState); mpD3DDevice->RSSetState(g_pRasterizerState); // Set up the World Matrix D3DXMatrixIdentity(&WorldMatrix); D3DXMatrixLookAtLH(&ViewMatrix, new D3DXVECTOR3(200.0f, 60.0f, -20.0f), new D3DXVECTOR3(200.0f, 50.0f, 0.0f), new D3DXVECTOR3(0.0f, 1.0f, 0.0f)); // Set up the projection matrix D3DXMatrixPerspectiveFovLH(&ProjectionMatrix, (float)D3DX_PI * 0.5f, (float)mWidth/(float)mHeight, 0.1f, 100.0f); pTimeVariable = NULL; if(!CreateObject()) { return false; } return true; } //These are actions that take place after the clearing of the buffer and before the present void MyGame::GameDraw() { static float rotationAngle = 0.0f; // create the rotation matrix using the rotation angle D3DXMatrixRotationY(&WorldMatrix, rotationAngle); rotationAngle += (float)D3DX_PI * 0.0f; // Set the input layout mpD3DDevice->IASetInputLayout(modelObject.pVertexLayout); // Set vertex buffer UINT stride = sizeof(VertexPos); UINT offset = 0; mpD3DDevice->IASetVertexBuffers(0, 1, &modelObject.pVertexBuffer, &stride, &offset); mpD3DDevice->IASetIndexBuffer(modelObject.pIndicesBuffer, DXGI_FORMAT_R32_UINT, 0); pTimeVariable->SetFloat((float)currentTime); // Set primitive topology mpD3DDevice->IASetPrimitiveTopology(D3D10_PRIMITIVE_TOPOLOGY_TRIANGLELIST); // Combine and send the final matrix to the shader D3DXMATRIX finalMatrix = (WorldMatrix * ViewMatrix * ProjectionMatrix); pProjectionMatrixVariable->SetMatrix((float*)&finalMatrix); // make sure modelObject is valid // Render a model object D3D10_TECHNIQUE_DESC techniqueDescription; modelObject.pTechnique->GetDesc(&techniqueDescription); // Loop through the technique passes for(UINT p=0; p < techniqueDescription.Passes; ++p) { modelObject.pTechnique->GetPassByIndex(p)->Apply(0); // draw the cube using all 36 vertices and 12 triangles mpD3DDevice->DrawIndexed(modelObject.numIndices,0,0); } } //Render actually incapsulates Gamedraw, so you can call data before you actually clear the buffer or after you //present data void MyGame::Render() { // Get the start timer count QueryPerformanceCounter(&timeStart); currentTime += anim_rate; DX3dApp::Render(); QueryPerformanceCounter(&timeEnd); anim_rate = ( (float)timeEnd.QuadPart - (float)timeStart.QuadPart ) / timerFreq.QuadPart; } bool MyGame::CreateObject() { VertexPos vertices[NUM_VERTSX * NUM_VERTSY]; for(int z=0; z < NUM_VERTSY; ++z) { for(int x = 0; x < NUM_VERTSX; ++x) { vertices[x + z * NUM_VERTSX].pos.x = (float)x * CELL_WIDTH; vertices[x + z * NUM_VERTSX].pos.z = (float)z * CELL_HEIGHT; vertices[x + z * NUM_VERTSX].pos.y = (float)(rand() % CELL_HEIGHT); vertices[x + z * NUM_VERTSX].color = D3DXVECTOR4(1.0, 0.0f, 0.0f, 0.0f); } } DWORD indices[NUM_VERTSX * NUM_VERTSY * 6]; int curIndex = 0; for(int z=0; z < NUM_ROWS; ++z) { for(int x = 0; x < NUM_COLS; ++x) { int curVertex = x + (z * NUM_VERTSX); indices[curIndex] = curVertex; indices[curIndex + 1] = curVertex + NUM_VERTSX; indices[curIndex + 2] = curVertex + 1; D3DXVECTOR3 v0 = vertices[indices[curIndex]].pos; D3DXVECTOR3 v1 = vertices[indices[curIndex + 1]].pos; D3DXVECTOR3 v2 = vertices[indices[curIndex + 2]].pos; D3DXVECTOR3 normal; D3DXVECTOR3 cross; D3DXVec3Cross(&cross, &D3DXVECTOR3(v2 - v0),&D3DXVECTOR3(v1 - v0)); D3DXVec3Normalize(&normal, &cross); vertices[indices[curIndex]].normal = normal; vertices[indices[curIndex + 1]].normal = normal; vertices[indices[curIndex + 2]].normal = normal; indices[curIndex + 3] = curVertex + 1; indices[curIndex + 4] = curVertex + NUM_VERTSX; indices[curIndex + 5] = curVertex + NUM_VERTSX + 1; v0 = vertices[indices[curIndex + 3]].pos; v1 = vertices[indices[curIndex + 4]].pos; v2 = vertices[indices[curIndex + 5]].pos; D3DXVec3Cross(&cross, &D3DXVECTOR3(v2 - v0),&D3DXVECTOR3(v1 - v0)); D3DXVec3Normalize(&normal, &cross); vertices[indices[curIndex + 3]].normal = normal; vertices[indices[curIndex + 4]].normal = normal; vertices[indices[curIndex + 5]].normal = normal; curIndex += 6; } } //Create Layout D3D10_INPUT_ELEMENT_DESC layout[] = { {"POSITION",0,DXGI_FORMAT_R32G32B32_FLOAT, 0 , 0, D3D10_INPUT_PER_VERTEX_DATA, 0}, {"COLOR",0,DXGI_FORMAT_R32G32B32A32_FLOAT, 0 , 12, D3D10_INPUT_PER_VERTEX_DATA, 0}, {"NORMAL",0,DXGI_FORMAT_R32G32B32A32_FLOAT, 0 , 28, D3D10_INPUT_PER_VERTEX_DATA, 0} }; UINT numElements = (sizeof(layout)/sizeof(layout[0])); modelObject.numVertices = sizeof(vertices)/sizeof(VertexPos); //Create buffer desc D3D10_BUFFER_DESC bufferDesc; bufferDesc.Usage = D3D10_USAGE_DEFAULT; bufferDesc.ByteWidth = sizeof(VertexPos) * modelObject.numVertices; bufferDesc.BindFlags = D3D10_BIND_VERTEX_BUFFER; bufferDesc.CPUAccessFlags = 0; bufferDesc.MiscFlags = 0; D3D10_SUBRESOURCE_DATA initData; initData.pSysMem = vertices; //Create the buffer HRESULT hr = mpD3DDevice->CreateBuffer(&bufferDesc, &initData, &modelObject.pVertexBuffer); if(FAILED(hr)) return false; modelObject.numIndices = sizeof(indices)/sizeof(DWORD); bufferDesc.ByteWidth = sizeof(DWORD) * modelObject.numIndices; bufferDesc.BindFlags = D3D10_BIND_INDEX_BUFFER; initData.pSysMem = indices; hr = mpD3DDevice->CreateBuffer(&bufferDesc, &initData, &modelObject.pIndicesBuffer); if(FAILED(hr)) return false; ///////////////////////////////////////////////////////////////////////////// //Set up fx files LPCWSTR effectFilename = L"effect.fx"; modelObject.pEffect = NULL; hr = D3DX10CreateEffectFromFile(effectFilename, NULL, NULL, "fx_4_0", D3D10_SHADER_ENABLE_STRICTNESS, 0, mpD3DDevice, NULL, NULL, &modelObject.pEffect, NULL, NULL); if(FAILED(hr)) return false; pProjectionMatrixVariable = modelObject.pEffect->GetVariableByName("Projection")->AsMatrix(); pTimeVariable = modelObject.pEffect->GetVariableByName("TimeStep")->AsScalar(); //Dont sweat the technique. Get it! LPCSTR effectTechniqueName = "Render"; modelObject.pTechnique = modelObject.pEffect->GetTechniqueByName(effectTechniqueName); if(modelObject.pTechnique == NULL) return false; //Create Vertex layout D3D10_PASS_DESC passDesc; modelObject.pTechnique->GetPassByIndex(0)->GetDesc(&passDesc); hr = mpD3DDevice->CreateInputLayout(layout, numElements, passDesc.pIAInputSignature, passDesc.IAInputSignatureSize, &modelObject.pVertexLayout); if(FAILED(hr)) return false; return true; }

    Read the article

  • VS 2012 Code Review &ndash; Before Check In OR After Check In?

    - by Tarun Arora
    “Is Code Review Important and Effective?” There is a consensus across the industry that code review is an effective and practical way to collar code inconsistency and possible defects early in the software development life cycle. Among others some of the advantages of code reviews are, Bugs are found faster Forces developers to write readable code (code that can be read without explanation or introduction!) Optimization methods/tricks/productive programs spread faster Programmers as specialists "evolve" faster It's fun “Code review is systematic examination (often known as peer review) of computer source code. It is intended to find and fix mistakes overlooked in the initial development phase, improving both the overall quality of software and the developers' skills. Reviews are done in various forms such as pair programming, informal walkthroughs, and formal inspections.” Wikipedia No where does the definition mention whether its better to review code before the code has been committed to version control or after the commit has been performed. No matter which side you favour, Visual Studio 2012 allows you to request for a code review both before check in and also request for a review after check in. Let’s weigh the pros and cons of the approaches independently. Code Review Before Check In or Code Review After Check In? Approach 1 – Code Review before Check in Developer completes the code and feels the code quality is appropriate for check in to TFS. The developer raises a code review request to have a second pair of eyes validate if the code abides to the recommended best practices, will not result in any defects due to common coding mistakes and whether any optimizations can be made to improve the code quality.                                             Image 1 – code review before check in Pros Everything that gets committed to source control is reviewed. Minimizes the chances of smelly code making its way into the code base. Decreases the cost of fixing bugs, remember, the earlier you find them, the lesser the pain in fixing them. Cons Development Code Freeze – Since the changes aren’t in the source control yet. Further development can only be done off-line. The changes have not been through a CI build, hard to say whether the code abides to all build quality standards. Inconsistent! Cumbersome to track the actual code review process.  Not every change to the code base is worth reviewing, a lot of effort is invested for very little gain. Approach 2 – Code Review after Check in Developer checks in, random code reviews are performed on the checked in code.                                                      Image 2 – Code review after check in Pros The code has already passed the CI build and run through any code analysis plug ins you may have running on the build server. Instruct the developer to ensure ZERO fx cop, style cop and static code analysis before check in. Code is cleaner and smell free even before the code review. No Offline development, developers can continue to develop against the source control. Cons Bad code can easily make its way into the code base. Since the review take place much later in the cycle, the cost of fixing issues can prove to be much higher. Approach 3 – Hybrid Approach The community advocates a more hybrid approach, a blend of tooling and human accountability quotient.                                                               Image 3 – Hybrid Approach 1. Code review high impact check ins. It is not possible to review everything, by setting up code review check in policies you can end up slowing your team. More over, the code that you are reviewing before check in hasn't even been through a green CI build either. 2. Tooling. Let the tooling work for you. By running static analysis, fx cop, style cop and other plug ins on the build agent, you can identify the real issues that in my opinion can't possibly be identified using human reviews. Configure the tooling to report back top 10 issues every day. Mandate the manual code review of individuals who keep making it to this list of shame more often. 3. During Merge. I would prefer eliminating some of the other code issues during merge from Main branch to the release branch. In a scrum project this is still easier because cheery picking the merges is a possibility and the size of code being reviewed is still limited. Let the tooling work for you, if some one breaks the CI build often, put them on a gated check in build course until you see improvement. If some one appears on the top 10 list of shame generated via the build then ensure that all their code is reviewed till you see improvement. At the end of the day, the goal is to ensure that the code being delivered is top quality. By enforcing a code review before any check in, you force the developer to work offline or stay put till the review is complete. What do the experts say? So I asked a few expects what they thought of “Code Review quality gate before Checking in code?" Terje Sandstrom | Microsoft ALM MVP You mean a review quality gate BEFORE checking in code????? That would mean a lot of code staying either local or in shelvesets, and not even been through a CI build, and a green CI build being the main criteria for going further, f.e. to the review state. I would not like code laying around with no checkin’s. Having a requirement that code is checked in small pieces, 4-8 hours work max, and AT LEAST daily checkins, a manual code review comes second down the lane. I would expect review quality gates to happen before merging back to main, or before merging to release.  But that would all be on checked-in code.  Branching is absolutely one way to ease the pain.   Another way we are using is automatic quality builds, running metrics, coverage, static code analysis.  Unfortunately it takes some time, would be great to be on CI’s – but…., so it’s done scheduled every night. Based on this we get, among other stuff,  top 10 lists of suspicious code, which is then subjected to reviews.  If a person seems to be very popular on these top 10 lists, we subject every check in from that person to a review for a period. That normally helps.   None of the clients I have can afford to have every checkin reviewed, so we need to find ways around it. I don’t disagree with the nicety of having all the code reviewed, but I find it hard to find those resources in today’s enterprises. David V. Corbin | Visual Studio ALM Ranger I tend to agree with both sides. I hate having code that is not checked in, but at the same time hate having “bad” code in the repository. I have found that branching is one approach to solving this dilemma. Code is checked into the private/feature branch before the review, but is not merged over to the “official” branch until after the review. I advocate both, depending on circumstance (especially team dynamics)   - The “pre-checkin” is usually for elements that may impact the project as a whole. Think of it as another “gate” along with passing unit tests. - The “post-checkin” may very well not be at the changeset level, but correlates to a review at the “user story” level.   Again, this depends on team dynamics in play…. Robert MacLean | Microsoft ALM MVP I do not think there is no right answer for the industry as a whole. In short the question is why do you do reviews? Your question implies risk mitigation, so in low risk areas you can get away with it after check in while in high risk you need to do it before check in. An example is those new to a team or juniors need it much earlier (maybe that is before checkin, maybe that is soon after) than seniors who have shipped twenty sprints on the team. Abhimanyu Singhal | Visual Studio ALM Ranger Depends on per scenario basis. We recommend post check-in reviews when: 1. We don't want to block other checks and processes on manual code reviews. Manual reviews take time, and some pieces may not require manual reviews at all. 2. We need to trace all changes and track history. 3. We have a code promotion strategy/process in place. For risk mitigation, post checkin code can be promoted to Accepted branches. Or can be rejected. Pre Checkin Reviews are used when 1. There is a high risk factor associated 2. Reviewers are generally (most of times) have immediate availability. 3. Team does not have strict tracking needs. Simply speaking, no single process fits all scenarios. You need to select what works best for your team/project. Thomas Schissler | Visual Studio ALM Ranger This is an interesting discussion, I’m right now discussing details about executing code reviews with my teams. I see and understand the aspects you brought in, but there is another side as well, I’d like to point out. 1.) If you do reviews per check in this is not very practical as a hard rule because this will disturb the flow of the team very often or it will lead to reduce the checkin frequency of the devs which I would not accept. 2.) If you do later reviews, for example if you review PBIs, it is not easy to find out which code you should review. Either you review all changesets associate with the PBI, but then you might review code which has been changed with a later checkin and the dev maybe has already fixed the issue. Or you review the diff of the latest changeset of the PBI with the first but then you might also review changes of other PBIs. Jakob Leander | Sr. Director, Avanade In my experience, manual code review: 1. Does not get done and at the very least does not get redone after changes (regardless of intentions at start of project) 2. When a project actually do it, they often do not do it right away = errors pile up 3. Requires a lot of time discussing/defining the standard and for the team to learn it However code review is very important since e.g. even small memory leaks in a high volume web solution have big consequences In the last years I have advocated following approach for code review - Architects up front do “at least one best practice example” of each type of component and tell the team. Copy from this one. This should include error handling, logging, security etc. - Dev lead on project continuously browse code to validate that the best practices are used. Especially that patterns etc. are not broken. You can do this formally after each sprint/iteration if you want. Once this is validated it is unlikely to “go bad” even during later code changes Agree with customer to rely on static code analysis from Visual Studio as the one and only coding standard. This has HUUGE benefits - You can easily tweak to reach the level you desire together with customer - It is easy to measure for both developers/management - It is 100% consistent across code base - It gets validated all the time so you never end up getting hammered by a customer review in the end - It is easy to tell the developer that you do not want code back unless it has zero errors = minimize communication You need to track this at least during nightly builds and make sure team sees total # issues. Do not allow #issues it to grow uncontrolled. On the project I run I require code analysis to have run on code before checkin (checkin rule). This means -  You have to have clean compile (or CA wont run) so this is extra benefit = very few broken builds - You can change a few of the rules to compile as errors instead of warnings. I often do this for “missing dispose” issues which you REALLY do not want in your app Tip: Place your custom CA rules files as part of solution. That  way it works when you do branching etc. (path to CA file is relative in VS) Some may argue that CA is not as good as manual inspection. But since manual inspection in reality suffers from the 3 issues in start it is IMO a MUCH better (and much cheaper) approach from helicopter perspective Tirthankar Dutta | Director, Avanade I think code review should be run both before and after check ins. There are some code metrics that are meant to be run on the entire codebase … Also, especially on multi-site projects, one should strive to architect in a way that lets men manage the framework while boys write the repetitive code… scales very well with the need to review less by containment and imposing architectural restrictions to emphasise the design. Bruno Capuano | Microsoft ALM MVP For code reviews (means peer reviews) in distributed team I use http://www.vsanywhere.com/default.aspx  David Jobling | Global Sr. Director, Avanade Peer review is the only way to scale and its a great practice for all in the team to learn to perform and accept. In my experience you soon learn who's code to watch more than others and tune the attention. Mikkel Toudal Kristiansen | Manager, Avanade If you have several branches in your code base, you will need to merge often. This requires manual merging, when a file has been changed in both branches. It offers a good opportunity to actually review to changed code. So my advice is: Merging between branches should be done as often as possible, it should be done by a senior developer, and he/she should perform a full code review of the code being merged. As for detecting architectural smells and code smells creeping into the code base, one really good third party tools exist: Ndepend (http://www.ndepend.com/, for static code analysis of the current state of the code base). You could also consider adding StyleCop to the solution. Jesse Houwing | Visual Studio ALM Ranger I gave a presentation on this subject on the TechDays conference in NL last year. See my presentation and slides here (talk in Dutch, but English presentation): http://blog.jessehouwing.nl/2012/03/did-you-miss-my-techdaysnl-talk-on-code.html  I’d like to add a few more points: - Before/After checking is mostly a trust issue. If you have a team that does diligent peer reviews and regularly talk/sit together or peer review, there’s no need to enforce a before-checkin policy. The peer peer-programming and regular feedback during development can take care of most of the review requirements as long as the team isn’t under stress. - Under stress, enforce pre-checkin reviews, it might sound strange, if you’re already under time or budgetary constraints, but it is under such conditions most real issues start to be created or pile up. - Use tools to catch most common errors, Code Analysis/FxCop was already mentioned. HP Fortify, Resharper, Coderush etc can help you there. There are also a lot of 3rd party rules you can add to Code Analysis. I’ve written a few myself (http://fccopcontrib.codeplex.com) and various teams from Microsoft have added their own rules (MSOCAF for SharePoint, WSSF for WCF). For common errors that keep cropping up, see if you can define a rule. It’s much easier. But more importantly make sure you have a good help page explaining *WHY* it's wrong. If you have small feature or developer branches/shelvesets, you might want to review pre-merge. It’s still better to do peer reviews and peer programming, but the most important thing is that bad quality code doesn’t make it into the important branch. So my philosophy: - Use tooling as much as possible. - Make sure the team understands the tooling and the importance of the things it flags. It’s too easy to just click suppress all to ignore the warnings. - Under stress, tighten process, it’s under stress that the problems of late reviews will really surface - Most importantly if you do reviews do them as early as possible, but never later than needed. In other words, pre-checkin/post checking doesn’t really matter, as long as the review is done before the code is released. It’ll just be much more expensive to fix any review outcomes the later you find them. --- I would love to hear what you think!

    Read the article

  • WCF: Server Not Found - from trace Empty Message when run async but works fine from console app?

    - by MrTortoise
    Todays cause of hair loss has been the following scenario: I have a service that takes 2 strings and returns another. This service uses basicHttpBinding <basicHttpBinding> <binding name="basicHttpNoSec"> <security mode="None" /> </binding> </basicHttpBinding> Anyway, it works fine from a console test app. I have a silverlight app sat on top which implements another basicHttpBinding service that simply reuses the contract in the other service and the silverlight App uses this service. I have a console app that confirms that this service is working and set up with basichttpbinding. I have all the clientAccessPolicy stuff in place. when I run the silverlight app the difference is that it runs everything async ... as such the only message i directly get back rom wcf is server not found. When i enable tracing I dig down to this message - as I know the methods work and the parameteres i pass in will return a valid string i am really puzzled at to what the cause is. any help much appreciated. <E2ETraceEvent xmlns="http://schemas.microsoft.com/2004/06/E2ETraceEvent"> <System xmlns="http://schemas.microsoft.com/2004/06/windows/eventlog/system"> <EventID>131075</EventID> <Type>3</Type> <SubType Name="Error">0</SubType> <Level>2</Level> <TimeCreated SystemTime="2010-06-07T14:17:40.6639249Z" /> <Source Name="System.ServiceModel" /> <Correlation ActivityID="{8ea9530e-12f4-4a82-9c26-dd2e23264c3c}" /> <Execution ProcessName="aspnet_wp" ProcessID="4616" ThreadID="6" /> <Channel /> <Computer>5JC2Y2J</Computer> </System> <ApplicationData> <TraceData> <DataItem> <TraceRecord xmlns="http://schemas.microsoft.com/2004/10/E2ETraceEvent/TraceRecord" Severity="Error"> <TraceIdentifier>http://msdn.microsoft.com/en-GB/library/System.ServiceModel.Diagnostics.ThrowingException.aspx</TraceIdentifier> <Description>Throwing an exception.</Description> <AppDomain>/LM/w3svc/1/ROOT/CopSilverlight.Web-1-129203938565564172</AppDomain> <Exception> <ExceptionType>System.ServiceModel.ProtocolException, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType> <Message>There is a problem with the XML that was received from the network. See inner exception for more details.</Message> <StackTrace> at System.ServiceModel.Channels.HttpRequestContext.CreateMessage() at System.ServiceModel.Channels.HttpChannelListener.HttpContextReceived(HttpRequestContext context, Action callback) at System.ServiceModel.Activation.HostedHttpTransportManager.HttpContextReceived(HostedHttpRequestAsyncResult result) at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.HandleRequest() at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.BeginRequest() at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.OnBeginRequest(Object state) at System.Runtime.IOThreadScheduler.ScheduledOverlapped.IOCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped) at System.Runtime.Fx.IOCompletionThunk.UnhandledExceptionFrame(UInt32 error, UInt32 bytesRead, NativeOverlapped* nativeOverlapped) at System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* pOVERLAP) </StackTrace> <ExceptionString>System.ServiceModel.ProtocolException: There is a problem with the XML that was received from the network. See inner exception for more details. ---&gt; System.Xml.XmlException: The body of the message cannot be read because it is empty. --- End of inner exception stack trace ---</ExceptionString> <InnerException> <ExceptionType>System.Xml.XmlException, System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType> <Message>The body of the message cannot be read because it is empty.</Message> <StackTrace> at System.ServiceModel.Channels.HttpRequestContext.CreateMessage() at System.ServiceModel.Channels.HttpChannelListener.HttpContextReceived(HttpRequestContext context, Action callback) at System.ServiceModel.Activation.HostedHttpTransportManager.HttpContextReceived(HostedHttpRequestAsyncResult result) at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.HandleRequest() at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.BeginRequest() at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.OnBeginRequest(Object state) at System.Runtime.IOThreadScheduler.ScheduledOverlapped.IOCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped) at System.Runtime.Fx.IOCompletionThunk.UnhandledExceptionFrame(UInt32 error, UInt32 bytesRead, NativeOverlapped* nativeOverlapped) at System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* pOVERLAP) </StackTrace> <ExceptionString>System.Xml.XmlException: The body of the message cannot be read because it is empty.</ExceptionString> </InnerException> </Exception> </TraceRecord> </DataItem> </TraceData> </ApplicationData> </E2ETraceEvent>

    Read the article

  • jquery cycle "allowPagerClickBubble: true" not quite working

    - by Shelagh
    Hi all, I want my page anchors to work as menu links so I used this code: $(function() { $('#slideshow').cycle({ slideExpr: 'img', fx: 'fade', speed: 2000, timeout: 4000, pager: '#nav', pagerEvent: 'mouseover', pauseOnPagerHover: true, pagerAnchorBuilder: function(idx, slide) { // return sel string for existing anchor return '#nav li:eq(' + (idx) + ') a'; }, allowPagerClickBubble: true }); }); If you click the right mouse button, you can choose to open the links and they do open just fine but a normal left button click does nothing. The thing is, they WERE working so I went to work on supposedly unrelated parts of the website and at some point the left mouse button click stopped working. Any ideas what I might have done? Left button clicking still works for everything else on the site so its not some global setting. The cycle is here if my explanation is not clear: http://www.mcguirenaturals.ca/index.php Thanks for any help

    Read the article

  • JQUERY CYCLE - Can I add page links to anchors assigned to Cycle's pager?

    - by christianDuncan
    Hello everyone. Seems I've outdone myself. All the while I was creating this pretty little 'latest news' widget that fades on mouseover of each anchor. Then my colleague says, "Hey, Chris, these links don't work" ...oops. I would like to find out if I can have these anchors take the user to the relvent page on click. Currently Cycle is set to do its hocus pocus on mouseover. This is my Cycle code: $('#newsSlider .slides ul').cycle({ fx: 'fade', speed: 1000, timeout: 0, pager: '.slides-nav', pagerEvent: 'mouseover', pagerAnchorBuilder: function(idx, slide) { // return sel string for existing anchor return '.slides-nav li:eq(' + (idx) + ') a'; } And here is the dev site: http://slg-development.co.uk/Gradient_12859/ Any help would be hugely appriciated. Thanks everyone! Christian

    Read the article

  • Best practice for storing global data in PHP?

    - by user281434
    Hi I'm running a web application that allows a user to log in. The user can add/remove content to his/her 'library' which is displayed on a page called "library.php". Instead of querying the database for the contents of the users library everytime they load "library.php", I want to store it globally for PHP when the user logs in, so that the query is only run once. Is there a best practice for doing this? fx. storing their library in an array in a session? Thanks for your time

    Read the article

  • Upload 1GB files using chunking in PHP

    - by rjha94
    I have a web application that accepts file uploads of up to 4 MB. The server side script is PHP and web server is NGINX. Many users have requested to increase this limit drastically to allow upload of video etc. However there seems to be no easy solution for this problem with PHP. First, on the client side I am looking for something that would allow me to chunk files during transfer. SWFUpload does not seem to do that. I guess I can stream uploads using Java FX (http://blogs.sun.com/rakeshmenonp/entry/javafx_upload_file ) but I can not find any equivalent of request.getInputStream in PHP. Increasing browser client_post limits or php.ini upload or max_execution times is not really a solution for really large files (~ 1GB) because maybe the browser will time out and think of all those blobs stored in memory. is there any way to solve this problem using PHP on server side? I would appreciate your replies.

    Read the article

  • jQuery - cycle help

    - by MrTunes
    I'm looking to get some help on using the cycle library for jQuery. I'm in the beginner demos, and I got the absolute first one completed. This is the second one on the page. <script src="jquery-1.2.6.min.js" type="text/javascript"></script> <script src="jquery.cycle.all.min.js" type="text/javascript"></script> <script type="text/javascript"> $(document).ready(function() { $('.pics').cycle({ fx: 'scrollDown', speed: 300, timeout: 2000 }); </script> My CSS is identical to the one on the page, that's why I put .pics in the quotes.

    Read the article

  • Add title to jQuery Cycle slideshow from Alt attribute?

    - by thatryan
    I am building a slideshow and need to have a title appear for each picture that get cycled. I created alt attributes for them and am trying to have cycle display them for each image, but It only shows the first one. I am unsure how to get the code I have into the cycle "loop" for the gallery? Does this make sense? here is what I have, (well, part of it I mean) :) thanks! $('#slideshow').before('<div class="navigation">').cycle({ fx: 'fade', timeout: 6000, pager: '.navigation' }); $('.image_title').html($(this).find('img').attr('alt'));

    Read the article

  • Installing JavaFX 2.0 in Eclipse Juno for Mac

    - by Josh
    I'm running Mac OS X 10.6.x (Snow Leopard) right now, so I'm pretty sure that there could be some issues with supported systems, but I'm trying to install JavaFX 2.0 (or 2.1.x) in Eclipse Juno for Java EE (version 3.8). I have already installed the e(fx)clipse plugin, but I'm not sure if I'm downloading the right JavaFX .zip file from the Oracle website. I downloaded the JavaFX 2.2 beta release because it seemed to be the only release available for OS X, but I could be wrong. Once I download this archive, I'm not exactly what to do with it/where to place it so that Eclipse recognizes it as the JavaFX 2.2 SDK. I know that I have to go into preferences and set the location of the SDK file, but there doesn't seem to be any selectable .jar file or folder to set it to. Am I doing something wrong here? Any help is appreciated. Edit: I worked around the issue by setting the SDK location to the location of the downloaded JavaFX 2.2 SDK in the JavaFX section in the preferences tree.

    Read the article

  • Debug .Net Framework's source code only shows disassembly in Visual Studio 2010

    - by jdecuyper
    Hi! I'm trying to debug .Net Framework's source code using Visual Studio 2010 Professional. I followed the steps described in Raj Kaimal's post but I must be doing something wrong since the only code I'm getting to see is the disassembly code: As you can see in the image, the Go to Source Code and the Load Symbols options are disabled. Nevertheless, symbols are downloaded from Microsoft's server since I can see them inside the local cache directory. The code I'm debugging goes as follow: var wr = WebRequest.Create("http://www.google.com"); Console.WriteLine("Web request created"); var req = wr.GetRequestStream(); Console.Read(); When I hit F11 to step into the first line of code, a window pops us looking for the "WebRequst.cs" file inside "f:\dd\ndp\fx\src\Net\System\Net\WebRequest.cs" which does not exists on my machine. What am I missing? Thanks a lot for your help.

    Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >